Factory jobs in Richmond, VirginiaCrear alertas

Job DescriptionSalary: The Mechanical Systems Engineer is responsible for the development and improvement of electromechanical systems throughout manufacturing sites. Electromechanical System design and development needs will range from designing improvements to existing manufacturing equipment to the development of new, custom-designed equipment as part of R&D or Capital projects. The engineer will be responsible for transforming concepts from customers into proof-of-principle designs, prototypes, and/or commercial-scale equipment. Primary Job Duties • Develop first-of-a-kind custom equipment including conceptualizing new equipment based on customer and business requirements., • Work with operations, maintenance, safety, and engineering to design improvements to existing equipment., • Perform engineering calculations to determine speeds, loads, and other data required for sizing equipment., • Ensure accuracy, completeness, and feasibility of designs and specifications as well as adherence to applicable mechanical and safety standards., • Support operations, maintenance, and engineering to troubleshoot and resolve production and quality issues in manufacturing plants., • Effectively manage multiple programs with focus on meeting cost and timing commitments while maintaining high quality work., • Communicate project objectives effectively, both written and verbal, to team members, plant personnel, and leadership., • Develop capital project basic data packages, equipment specifications, and fabrication and installation scopes of work. Visit vendor shops to monitor fabrication quality and witness factory acceptance tests. Provide onsite support during equipment installation and commissioning/startup., • 5 years or more of machine design experience REQUIRED., • BS in Mechanical Engineering required. MS in Mechanical Engineering preferred., • Knowledge of commercial fabrication techniques, machining practices, inspection processes, fastening systems, machine dynamics, system controls, surface finishes, machine safety, and internal/external support systems., • Experience with Finite Element Analysis tools (eg Creo Simulate) to conduct stress analyses., • Deep understanding of interactions between mechanical, electrical, and controls disciplines in relation to machine design., • Able to work independently and with a team., • Able to write technical equipment specifications for equipment purchases and write scopes of work for engineering, design, and installation of equipment., • Ability to implement machine safety systems (field input devices and safety controllers / relays) as defined by machine risk assessments., • Position may require up to 50% travel (US based and International)., • Advanced usage of MS Office 365 products, CAD software, and various vendor software.

Job Description Company Description Quick Servant Company, Inc. is a leading provider of HVAC, cooking equipment, and refrigeration solutions for commercial clients. We are accepting applicants with Masters, Journeyman, and Apprentice license, or relevant experience in commercial HVAC and refrigeration field. Our office is in Toano, VA. We offer top competitive pay, a full benefits package, a new company vehicle, and growth opportunities with factory-authorized training. Additionally, we have our own Quick Servant University providing on-the-job training to ensure continuous skill development and career advancement. We will give you every opportunity to grow. Employee development is our top priority. With over 45 years of experience, our goal is to exceed customer expectations by delivering prompt and reliable service. We build long-term partnerships based on integrity and a commitment to satisfaction. Our service areas include Maryland, Delaware, Washington D.C., and Virginia. Role Description This is a full-time role for a Commercial HVAC/R Technician. The Commercial HVAC/R Technician will be responsible for troubleshooting, maintaining, and repairing HVAC systems, commercial refrigeration units, and commercial cooking equipment. The technician will also perform preventive maintenance tasks and handle minor electric and plumbing services as required. Qualifications • Expertise in preventative maintenance., • Diagnoses and troubleshoot issues to ensure equipment operates at an optimal efficiency., • Knowledge of EPA regulations and compliance, • Complete necessary repairs or replacements to keep systems in compliance with safety and operational standards., • Strong problem-solving and analytical skills, • Excellent communication and customer service skills, • Strong attention to detail and ability to work independently., • Relevant HVAC certifications and licenses, • Verifiable experience in commercial HVAC and refrigeration systems In addition to top wages, Quick Servant offers a complete benefits package and additional perks including: • 100% company paid Medical, Dental and Vision Insurance, • Paid major holidays., • Paid sick leave and vacations., • A company vehicle, phone, and tablet, • Dispatched from home.

Job Description Hazen & Sawyer is seeking an Electrical Project Engineer for our Richmond, VA office. Candidate will provide electrical engineering and design for water and wastewater facility projects, serving as lead electrical engineer when required. Candidate will support projects both local to and regional to the office, as well as supporting projects in other areas as requested by the firm. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK. Our electrical group has over 100 employees spread across more than 30 of our offices Key Responsibilities: • Power systems design, including medium and low voltage electrical power distribution, generator design, motor controls, VFDs, lighting systems, equipment layout and related activities at water and wastewater facilities, • Prepare project specifications and edit corporate electrical master specifications as needed to suit each project, • Serve as the lead electrical engineer on multiple concurrent projects. Ensure the work is performed in accordance with scope, schedule, and budget, • Perform site visits as needed from project conceptual design through construction, • Perform electrical design work in AutoCAD and/or Revit as required by the project, • Perform electrical power system studies in SKM and/or ETAP as required by the project, • Complete construction administration tasks including review of shop drawings, replies to requests for information, change order requests and similar tasks, • Perform factory witness testing of electrical equipment as required by the project, • Monitor and participate in the field testing and start-up of electrical systems, • Represent the electrical discipline in client project meetings, • Interaction with clients, contractors, and engineers from other disciplines, • Serve as a technical mentor for less experienced electrical staff, • Assist in business development activities such as proposal preparation, • Develop scope and fee documents for electrical portions of projects Fill the role of Project Manager for selected electrical projects. Required Qualifications: • Bachelor of Science in Electrical Engineering, • 5-14 years of relevant experience in heavy industrial electrical engineering and design, • Licensed as a registered professional engineer in at least one U.S. state., • Ability to be licensed in additional states at the request of the firm, • Experience with SKM or ETAP power system software, • Experience with AutoCAD and/or Revit BIM software, • Experience in Microsoft Office products, • Experience in the Water/Wastewater industry, • Experience with Bluebeam software and Bluebeam Studio, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionCompany Description CapTech is an award-winning consulting firm that collaborates with clients to achieve what’s possible through the power of technology. At CapTech, we’re passionate about the work we do and the results we achieve for our clients. From the outset, our founders shared a collective passion to create a consultancy centered on strong relationships that would stand the test of time. Today we work alongside clients that include Fortune 100 companies, mid-sized enterprises, and government agencies, a list that spans across the country. Job Description CapTech Data Engineering consultants enable clients to build and maintain advanced data systems that bring together data from disparate sources in order to enable decision-makers. We build pipelines and prepare data for use by data scientists, data analysts, and other data systems. We love solving problems and providing creative solutions for our clients. Cloud Data Engineers leverage the client’s cloud infrastructure to deliver this value today and to scale for the future. We enjoy a collaborative environment and have many opportunities to learn from and share knowledge with other developers, architects, and our clients. The Value You Deliver (or What You’ll Do) • Be trusted advisor to customers with best practices, methodologies, and technologies to implement data engineering solutions., • Design, implement, and maintain modern data pipelines to deliver optimal solutions utilizing appropriate cloud technologies., • Partner with product owners and business SMEs to analyze customer requirements and provide a supportable and sustainable engineered solution., • Provide technical leadership and collaborate within and across teams to ensure that the overall technical solution is aligned with the customer needs., • Stay current with the latest cloud technologies, patterns, and methodologies; share knowledge by clearly articulating results and ideas to key stakeholders. Qualifications, • Experience building/operating highly available distributed systems of data extraction, ingestion, and processing large data sets, • 5+ years of experience delivering data engineering solutions on cloud platform, • 5+ years of experience implementing modern designs using at least one cloud-based solution/platform (AWS, Azure, GCP), • Advanced level proficiency with at least one ETL / Data Orchestration technology (Azure Data Factory, SSIS, Informatica, Alteryx, Ab Initio, Pentaho, Talend, Matillion), • Experience cloud-based data warehousing and data lake solutions like Snowflake, Redshift, Databricks, • 5+ years of experience with SQL or NoSQL database (PostgreSQL, MySQL, SQL server, Oracle, Aurora, Presto, BigQuery), • Expertise with SQL, database design/structure and data structure (star, snowflake schemas, de/normalized designs), • 5+ years of experience with at least one programming language (Python, Java, R, C / C# / C++, Shell), • Familiarity with one or more DevOps tools (git, Jenkins, CI/CD, Jira), • Fundamental understanding of big data, open source, and data streaming concepts, • Ability to think strategically and provide recommendations utilizing traditional and modern architectural components based on business needs, • Experience providing technical leadership and mentoring other engineers in data engineering space, • Cloud certification on any platform a plus Additional Information We want everyone at CapTech to be able to envision a lasting and rewarding career here, which is why we offer a variety of career paths based on your skills and passions. You decide where and how you want to develop, and we help get you there with customizable career progression and a comprehensive benefits package to support you along the way. Alongside our suite of traditional benefits encompassing generous PTO, health coverage, disability insurance, paid family leave and more, we’ve launched extended benefits to help meet our employees’ needs. • Learning & Development – Programs offering certification and tuition support, digital on-demand learning courses, mentorship, and skill development paths, • Modern Health –A mental health and well-being platform that provides 1:1 care, group support sessions, and self-serve resources to support employees and their families through life’s ups and downs, • Carrot Fertility –Inclusive fertility and family-forming coverage for all paths to parenthood – including adoption, surrogacy, fertility treatments, pregnancy, and more – and opportunities for employer-sponsored funds to help pay for care, • Fringe –A company paid stipend program for personalized lifestyle benefits, allowing employees to choose benefits that matter most to them – ranging from vendors like Netflix, Spotify, and GrubHub to services like student loan repayment, travel, fitness, and more, • Employee Resource Groups – Employee-led committees that embrace and incorporate diversity and inclusion into our day-to-day operations, • Philanthropic Partnerships – Opportunities to engage in partnerships and pro-bono projects that support our communities. At this time, CapTech cannot transfer nor sponsor a work visa for this position. Applicants must be authorized to work directly for any employer in the United States without visa sponsorship. #LI-LM1

Job Description Summary Refinishes damaged body parts and bodies of vehicles in accordance with factory and dealership quality specifications and time standards. Essential Duties Operates and uses all body shop equipment properly and safely. • Removes rust from metal, and grease and dirt from work surface., • Masks and protects parts that are not to be painted or coated., • Fills cavities and dents with putty to attain smooth surface., • Mixes paint according to specifications., • Selects and mixes coating liquid to produce desired color., • Paints surface using sprayer or brush as appropriate., • Inspects painted units for quality of workmanship, noting any runs, sags and unpainted areas., • Heats and sprays wax onto products after they are tested., • Maintains tools and keeps equipment clean and in a proper state of repair., • Keeps work area clean., • Maintains and wears all required safety and health personal protective equipment, including respirator, in the manner recommended by the equipment manufacturer., • Complies with all laws and regulations pertaining to paint, thinners, and other hazardous materials. Reports any deviations to management., • Cooperates and assists other personnel in the repair and prepping of vehicles., • Understands, keeps abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know etc., • Other tasks as assigned. Education and/or Experience • High school diploma or GED (some post-secondary education or training preferred), • Minimum 1 year of experience, • Working knowledge of the automotive industry, • Exceptional interpersonal and organizational skills, • Fluent English speaking, • Clean driving record and the ability to drive both automatic and standard transmission vehicles

Job DescriptionCompany Description Must live in assigned territory or be willing to relocate M&H Valve Company/Kennedy Valve Company is seeking a Territory Sales Manager for Delaware, Maryland, and Virginia The Territory Sales Manager is responsible for all aspects of sales, marketing, and account management for all accounts within a multi-state territory as part of the McWane family of businesses. We are proud to say that our products are made in the USA! Grow the company market share through specific efforts and by managing, maintaining, and expanding existing distributor base while providing quality customer service in support of the sales and profitability goals for the assigned territory. Assists with technical questions and installation needs through superior product knowledge. This salaried position offers a full suite of insurance benefits, 401(k), vacation, and holidays. Relocation package available for the right candidate. Come join our team! M&H Valve Company is a world-class manufacturer of water and wastewater materials including fire hydrants, resilient wedge gate valves, butterfly valves and check valves. Since 1854, M&H has developed a reputation for excellence and dependability. Our extensive facilities and innovative technologies have made us a business and community leader. From state-of-the-art environmental upgrades to advanced training initiatives and community outreach, we’re working every day to make sure that M&H Valve is the best in the business. M&H Valve Company is part of Birmingham, AL based McWane, Inc. Click here to take a Facility Tour. All candidates offered employment must submit to a drug screen, physical, and background check. Job Description • Develops strong communication networks and builds relationships with distributors, engineers, and municipalities., • Focuses sales efforts by studying existing and potential volume of distributors., • Executes the Company’s pricing strategy for assigned accounts to ensure adequate margins and returns on sales., • Submits weekly reports to management highlighting market conditions, • Utilizes the assigned software program to document customer interactions and opportunity management., • Trouble shoots product issues in the field and by phone., • Works as liaison between end user, customers, and company on all matters., • Informs and trains distributor’s salespeople in latest product and marketing information., • Participates in trade associations, including assisting with seminars, trade shows, and presentations., • Communicates regularly with the National Sales manager to monitor needs and concerns within the territory and for allocation of resources., • Prepares price quotations or bids based on knowledge of material and most recent market conditions., • Monitors competition by gathering current marketplace information on pricing, products, delivery schedules, marketing techniques, etc., • Practices and promotes The McWane Way principles., • Performs various other miscellaneous sales and service related duties as directed by management. Travel and Residence Requirements: • Approximately 75% travel; 25% home office work., • Must live in assigned territory or be willing to relocate.Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: • Bachelor's degree, preferred., • Five years’ industrial sales experience required, preferably in waterworks industry; or completion of McWane Sales Trainee program., • Intermediate proficiency in Microsoft Word and Excel required., • Must be self-motivated and self led Must have a valid driver’s license and a clean DMV record of driving that can be insured. Mechanically Inclined: Must be physically and visually able to breakdown moderate to complex mechanical products and relate product details to customer and factory. Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: To perform this job successfully, an individual should have knowledge of Internet software; Inventory software; Manufacturing software; Order processing systems; Spreadsheet software and Word Processing software. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; sit and talk or hear. The employee is occasionally required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This a traditional office position with an expectation of periodic work in facility with exposure to a wide range of temperatures, humid conditions, moving machinery, dust, fumes, gases, odors, vibrations and varying noise levels. Fieldwork can happen any time of year. Extreme hot and cold weather could come into play. Contact with product under air or water pressure is a possibility. Although rare, possible that employee might have to go into trench box to review product. Extreme noise, fumes or airborne particles do not come into play. Additional Information All your information will be kept confidential according to EEO guidelines. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Job Description We are a residential roofing company providing high quality home services to the local community. We succeed by providing a premier customer experience. Our mission is to provide quality, with integrity, at a value. From lifetime material and labor warranties to certified factory-trained installers, our goal is to turn our customer's Dreams into reality. Our culture is fast-paced, diverse, and rewarding. We gauge our success on the success of our employees. What You Will Do: ● Conduct 10 to 15 pre-scheduled and confirmed in-home appointments per week -No cold calling or door knocking required ● Earn double commission for self-generated business ● Drive to pre-set appointments ● Complete a thorough two week training program with our dedicated sales training team ● Attend weekly sales meetings ● Additional responsibilities as assigned by leadership Rewards: ● Base salary + competitive commission structure ● Uncapped commission program with ability to earn over six figures in your first year ● Promotions from within ● Competitive sales contests with cash prizes and other awards ● Ongoing classroom style training and in-home sales training ● Travel opportunities ● Work with supporting departments to take job through completion following point of sale Must Haves: ● Must have reliable vehicle and a valid driver's license ● Ability to work a 5 day work weeks between Monday-Saturday, Saturdays are mandatory ● In home sales experience is preferred but not required ● Is coachable and eager to learn ● Self disciplined and money motivated ● Proficient in using technology; laptop, mobile device, tablet etc. ● Outstanding negotiation and communication skills Schedule: ● Monday through Friday appointments are scheduled at 10am, 2pm, 6pm ● Saturday appointments are scheduled at 10am, and 2pm. We offer health, dental, and vision insurance options to keep you and your family covered. At our company, you'll also find plenty of opportunities for growth and professional development, helping you build a rewarding and long-lasting career. It is the policy of Allstar and it's subsidiaries not to discriminate against any applicant for employment, or any employee because of age, color, sex, disability, national origin, race, religion, or veteran status

Job DescriptionDescription: Who We Are and why we are successful: Electrical Equipment Company (EECO) is a full line electrical distributor that specializes in industrial automation and power solutions that provide solutions to reduce costs, increase reliability, and improve performance. Driven by ideas to make an impact for our customers, EECO invests in the capabilities required to increase understanding, drive recommendations, and take action. EECO offers competitive compensation, career growth and development, and a strong benefits package. We are a drug-free workplace and an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Position Purpose: The Key Account Specialist (KAS), also known as inside sales, has direct responsibility for any aspect involving “service” as it relates to a set of accounts designated as “Key” accounts. This could include but would not be limited to offering suitable alternatives, quoting, factory coordination of people, delivery and pricing, coordinating of internal technical specialists, product managers, and or business development specialists based on the customer business needs. This position should free up our Key Account Manager’s (KAM’s) to develop new business while providing our “Key” customers with a dedicated resource to service their immediate needs. Results generated by the KAS will have a direct and immediate impact on customer satisfaction and our corporate strategic growth initiatives. Delivering an exceptional customer experience will be the primary area of responsibility for the Key Account Specialist. They will be supported by customer support reps, product service reps, the pricing team, purchasing/inventory control, credit/collections, sales and operations. “Key” accounts will get priority on resources committed and should expect the highest level of service we can organizationally deliver Primary Responsibilities: • Customer service and sales amplification - “Delight the customer” while freeing up the Key Account Manager (KAM) to focus on growing sales. Will be the customers’ first stop for:, • Pricing, quotes and delivery, • Quote follow-up – take the lead on requesting support. Liaison to communicate results back to the customer., • Expedites, • Pricing concerns – take the lead to resolve. Will likely coordinate and receive feedback from the KAM., • “Fixing” (something went wrong and needs a resolution), • Coordinating / getting information or support from the factory, • Price negotiation, • As sales opportunities are identified, qualify and when applicable get the KAM engaged, • Work with the KAM to jointly uncover key contacts/decision makers, and or get information relevant to advancing opportunities., • Leverage customer relationship management (CRM) to manage customer interactions, prioritize activities., • Profit – “Buy low, sell high”, • Based on customer spend, proactively manage pricing agreements and customer pricing files to maximize gross profit. (as required, minimum annually), • Look for migration opportunities to move customers to preferred vendors and increase margin percentages., • Make sure pricing files in place that allow us to be competitive and maximize margin, • Proactively notify the customer of pricing changes when applicable, • Opportunity identification – “Continually challenge the norm”, • Seek to understand the customer’s needs and challenges. Look for ways to drive efficiency through systems, technology, services and or solutions that generate value for the customer., • Proactively offer product / service solutions that offer value to the customer. EECO is seeking a highly organized and detail-oriented person who enjoys delivering professional customer service and values achieving goals and objectives. Being willing to see “the big picture” of our business and being team-oriented is super important. The most successful KAS has a natural desire to develop strong relationships with customers and “go the extra mile”. Requirements: • Associates degree or equivalent relevant work experience, • Previous experience in industrial or manufacturing environment is a plus, • Authentic customer service commitment – collaborative personality; tenacity to successfully see a challenge through to the end, • Intermediate knowledge of Microsoft Excel spreadsheet software, • Strong communications skills (both written and oral), • Ability to work independently and autonomously, • Strong attention to detail and analytical abilities, • Ability to learn; to become proficient in EECO's business systems and have a willingness to train for additional responsibilities, which will facilitate future professional growth. EECO Culture: We Value People with Values You must have the ability to work by and speak to EECO’s cultural beliefs: • Achieve Results - I am responsible for our Company’s Results and for aligning my activities to achieve those results., • Delight Customers - I understand and anticipate our customers’ needs and drive innovation for their benefit., • Straight Talk - I regularly ask for and offer direct and timely feedback., • It’s Mine - I “Own It” and always ask the question, “What Else Can I Do?”, • Value Everyone - I appreciate every member of our team and I recognize their contributions., • Think Team - I put the needs of the team first “because we are one EECO.”

Job DescriptionDescription: Purpose of Role We’re on the search for our newest Controls Engineer! As a Controls Engineer, you will be responsible for the application, evaluation, development, project management, commissioning, and system management of manufacturing industrial automation and control systems. The Controls Engineer will make lasting improvements with fact-based decision making and is proven to be vital to the success of our company! Requirements: Key Duties and Responsibilities To perform this job successfully, an individual must be able to perform each essential duty to a competent level. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Evaluate and troubleshoot facility and manufacturing control systems consisting of PLCs, AC and DC drives, computer controls, and HMI interfaces as well as traditional contactor type controls and process instrumentation., • Design and implement improvements to increase efficiency, reduce costs, and improve reliability of existing plant and manufacturing control systems and equipment., • Design control systems and prepare drawings, specifications, and scopes of work., • Write new, or modify existing, PLC programs, and make system hardware recommendations to resolve operation problems, improve processes, and implement new project designs to support factory initiatives and continuous improvement., • Document and maintain revisions to existing automated systems and maintain appropriate PLC and computer software/hardware information., • Interface with the IT Department and upper-level computer system personnel to ensure proper application of computer controls and database instructions., • Provide electrical engineering, hardware design, systems integration, PLC programming, motion programming, HMI configuration, component specification, project management, and start-up and commissioning of capital projects., • Support and assist Maintenance personnel in troubleshooting, testing, modifying, and installing electrical equipment and control systems., • Support and participate in implementation of and improvements to Manufacturing Execution System, • May perform other related duties as assigned.

Job Description Onsite Field Engineer - Data Centers - Richmond, VA Our client is an Engineering Design and Commissioning Company that is a leader in the Data Center / Mission Critical Facilities market. They provide design, commissioning consulting, and management expertise in the Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design, and LEED expertise when delivering consulting services. This career-growth-minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are seeking an Onsite Field Engineer to be the "bridge" that connects the Owners, Contractors and Offsite Design Team. This on-site engineering rep will be onsite for a multi-year data center construction project. This role will ensure seamless coordination and construction administration during the project. The ideal candidate will have a background in electrical or mechanical engineering with experience in data center construction, commissioning, and field inspections. Responsibilities: • Act as an onsite field / resident engineer for the engineering design team, ensuring design intent is upheld during construction, • Conduct site observations, document progress, and provide reports to the design team, • Support multiple data center builds in a region / travel as needed, • Support construction administration by reviewing RFI's, change orders, submittals, and specifications, • When in the field, candidate will be working onsite at the data center project working out of the construction trailer., • Participate in equipment inspections, factory witness testing, and vendor QA/QC visits, • Assist in coordinating site inspections and resolving field issues with contractors and vendors, • Attend design coordination workshops, commissioning (CxA) meetings, BIM coordination meetings, and owner-furnished contractor-installed (OFCI) vendor meetings, • Review contractor installations for compliance with design specifications and industry standards, • Provide technical expertise on mechanical and electrical systems, ensuring alignment with the Owner's requirements, • Support all levels of testing and commissioning (L1-L5), • Review and respond to contractor RFIs with the goal of reducing unnecessary queries, • Verify compliance with Owner's program and project deliverables., • Maintain accurate documentation of site activities, non-conformances, and testing results, • Support the design team by providing real-time feedback from the construction site, • 5-15+ years of experience in data center construction, design, commissioning, or MEP engineering, • Bachelor's Degree in Electrical or Mechanical Engineering preferred but relevant experience also considered, • EIT or PE license is a plus but not required, • Strong understanding of MEP systems (HVAC, CRAC/CRAH, Boilers, Chillers, Generators, UPS, Switchgear, Electrical Power Distribution), • Experience with AutoCAD, Revit, and BIM for design reviews is a plus, • Proficient in construction administration and document management, • Strong problem-solving skills and ability to analyze field conditions and recommend solutions, • Excellent verbal and written communication skills to interact with Owners, contractors, and engineering teams, • Ability to work on large construction sites independently and safely, • Travel 50% / otherwise work from home After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Albireo Energy (AE) is recognized as the leading provider of Smart Building Solutions across the nation. A full suite of integrated solutions and services help building owners and managers improve building reliability and value, increase efficiency, and reduce operational costs while improving comfort for tenants. Through its operating divisions and corporate support, AE has a history of providing exceptional solutions to sophisticated multi-market and mission critical facilities such as data centers, life sciences, military institutions, government buildings, commercial real estate, colleges, schools and health care. Albireo Energy was formed in 2013 with the vision of becoming the largest independent smart building solution provider in the US. The approach is to acquire regional businesses in key geographies throughout the U.S. and invest in organic growth. Since our founding in 2013, we have completed eighteen acquisitions with 24 offices, approximately 1,100 employees, 25,000 installations in 44 states and more than 40 countries. AE has preferred access to industry-leading technologies from Schneider Electric, Johnson Controls, Automated Logic, Delta, Distech, Alerton, Tridium, General Electric, Rockwell and Lutron. Mission: Albireo Energy aspires to deliver mutually beneficial outcomes with each of our key stakeholders; employees, customers, vendors and investors. Our solutions for buildings will be professionally developed and delivered to meet or exceed expectations of each constituent. Vision: To be the largest independent smart building solutions provider in the United States. This position is responsible for assisting in the operation of the Central Engineering Department. An individual in this position will be expected to perform additional job-related responsibilities and duties throughout the facility as assigned and as necessary. In addition to the responsibilities below, the Systems Integrator executes controls projects with an emphasis on delivering PLC and HMI/SCADA products utilizing industry standard platforms while collaborating with Albireo Central Engineering to design robust industrial systems. ESSENTIAL FUNCTIONS: An individual must be able to successfully perform the essential functions of this position with or without reasonable accommodation. • PLC logic design and programming., • HMI design and programming., • Electrical control circuit design and review., • Field activities such as installation, commissioning, and site investigations., • Perform systems integrations using serial and ethernet protocols., • Conduct Factory Acceptance Testing as required., • Preparation of proposals and review of plans and specifications., • Meeting and presentations to customers, internal and external., • Preparation of technical memoranda, reports, and electronic deliverables., • Report to work on time and ready to perform assigned tasks., • Stay busy and look for opportunities to advance project completion., • Complete assigned Controls Product training as part of the position’s career growth plan., • Support a culture based on open/honest dialogue and involvement with all team members that demonstrates the value of their input and engagement in improving performance., • Support a culture of high performance and accountability in employee and site safety as well as other aspects of the business., • Complete weekly timecard accurately and timely by 9am every Friday morning., • Prepare and submit weekly expense reports by 9am every Friday morning or as directed. Requirements • Equivalent experience, vocational school, or a bachelor’s degree in electrical engineering, Mechanical Engineering, Robotics, Computer Science, or a related field is preferred., • Demonstrated experience performing systems integration duties with increasing independence based on level., • Demonstrated experience with common industrial automation communication protocols and implementation practices, including Modbus TCP/IP, Ethernet/IP, PROFINET, and serial equivalents., • By Level:, • Systems Integrator I: 0-2 years of experience in PLC programming, HMI/SCADA design, and electrical schematic design., • Systems Integrator II: 2–4 years of experience in PLC programming, HMI/SCADA design, and electrical schematic design., • Systems Integrator III: 4+ years of experience in PLC programming, HMI/SCADA design, and electrical schematic design., • Familiarity with MS Office Suite of products including Outlook, Word, Excel, and intermediate computer skills., • Self-starter attitude that is inquisitive, intuitive, and willing to learn and grow., • Ability to document daily tasks, plan, and prepare for assigned responsibilities., • Prior experience supporting construction and field employee groups (1–2 years at I, scaling to 4+ years for III and Senior), including strong problem-solving skills, critical thinking, and initiative., • Excellent written and verbal communication skills, with the ability to prepare high-quality documents and reports. Compensation: Level I: $32/hr - $39/hr Level II: $40 – $48/hr, Level III: $49 – $56/hr, Senior: $57 – $65/hr Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionPOSITION SUMMARYJewett Automation is seeking a highly motivated Senior Mechanical Designer to lead the design, development, and implementation of custom automation solutions. The ideal candidate brings 10+ years of hands-on experience designing industrial automation systems, a strong grasp of SolidWorks, and the ability to collaborate across disciplines. This position may be performed remotely with occasional travel to our Richmond VA facility as needed for design reviews, machine debug, or customer interaction.PRIMARY DUTIES AND RESPONSIBILITIES • Lead and collaborate with project team members (internal and external) to strategically execute project scope., • Utilize SolidWorks software to create CAD models for mechanical components and assemblies per Jewett Automation’s design standards., • Research and specify commercially off-the-shelf components for use in automation system designs, • Participate in design reviews and present solutions to internal teams and customers., • Assist Sales and Applications departments to accurately estimate the material costs and labor for proposed equipment., • Conduct tolerance analyses, material selection, and stress/load evaluations (FEA) to ensure functionality and durability., • Serve as the primary mechanical engineering lead for assigned projects, from concept through FAT (Factory Acceptance Testing)., • Collaborate with Electrical and Controls Engineers to ensure machine designs meet requirements., • Provide technical guidance during peer reviews and support knowledge sharing across all engineering teams., • Create documentation for piping and instrumentation diagrams (P&ID) for projects., • Generate and maintain project documentation including design calculations, risk assessments, and revision histories., • Ensure designs meet performance requirements, safety standards, and customer specifications., • Perform all assigned tasks within a predefined amount of time, while following quality limits and safety practices., • Participate in scheduled departmental and project meetings., • Collaborate with colleagues to create cohesive and effective products., • Identify and suggest productivity and quality improvements to supervisors and engineers. REQUIREMENTS • Bachelor’s degree in mechanical engineering (BSME) or equivalent experience., • Minimum of 10 years of experience in mechanical design for automation systems., • Strong command of SolidWorks 3D CAD software or equivalent., • Ability to manage multiple projects simultaneously with minimal supervision., • Strong understanding of GD&T, manufacturing methods, and mechanical design principles., • Familiarity with manufacturing methods for mechanical components and fabrications., • Ability to work in a fast-paced, multi-tasking, cross-functional environment., • Familiarity with 6-axis robotics, material handling, conveyors, and end-of-line packaging., • Hands-on approach with strong troubleshooting and mechanical assembly skills., • Experience with risk assessments and compliance with safety standards., • Excellent communication and organizational skills., • Experience with 3D printing manufacturing methods., • Available to travel occasionally as needed for project support., • Proficiency in Microsoft Office (Outlook, Excel, Word, Teams) MEASUREMENTS OF SUCCESS • Delivering mechanical designs on time and within budget., • Maintaining low rework rates due to design error., • Demonstrating value among peers through collaboration and leadership., • Supporting the successful build and startup of equipment, • Contributing to the development of design standards, best practices, and process improvements., • Personal development in engineering skillsets as agreed upon during performance planning.

Job Description "VDOT's probationary period for this position is three months, during which the candidate is expected to be onsite in Richmond VA 3-4 days per week. After this probationary period, the position may transition to a largely remote posture, with a minimum onsite expectation of 1 week per quarter (to support leadership Town Hall sessions), and additional time as needed occasionally to support specific assignments." • Create overall application and solution architectures, component designs, and systems integration and implementations for a particular business solution., • Lead efforts in defining, documenting and estimating the following for enterprise applications., • Capture requirements for data, workflow, logical processes, hardware and operating system environment, on- prem, hybrid and cloud topologies, interfaces with other systems, internal and external checks and controls, system inputs and output., • Collaborate with other IT staff to assess business needs and requirements and translate them into automated solutions, • Produce relevant solution design artifacts including but not limited to technical estimates, conceptual, logical and physical system designs, sequence diagrams, and data models, • Coordinate new system development to ensure it is consistent and well integrated with existing application systems and COTS solutions, • Analyze and estimate feasibility and compatibility with hardware and other programs; and will consult with clients to prototype, architect, and design applications to meet needs., • Collaborate with Business areas and cross- functional Enterprise Architects to fully understand business needs and provide strategic consultation, • Partner with architects, other technical team members and to develop roadmaps and strategies to support agency KPIs, • Design/Implement Enterprise Security/technology Patterns, • Consult with teams as needed on initiatives and provide tactical direction as well as provide architecture considerations on legacy solutions Qualifications: • Experience with SAFe architecture and proven work experience with Agile/Scrum teams., • Proven experience in developing enterprise and solution level architectural designs., • Proven experience in overseeing the linking of cross-functional applications between disparate business units and systems., • Experience with business and technical requirements analysis, business process modeling/mapping, methodology development, and data mapping., • Knowledge of relational database design and management techniques., • Good project management skills and/or substantial exposure to project-based work structures, project lifecycle models, etc., • Strong knowledge of system and software quality assurance best practices and methodologies., • Competency with XML constructs and schemas., • Confidence and experience with API protocols and schemas such as SOAP and REST., • Strong understanding of end-user needs and requirements., • Excellent understanding of the organization’s goals and objectives., • Ability to work creatively and analytically in a team environment., • Excellent communication and documentation skills, Experience in enterprise-level application design and integrationRequired8YearsExperience in Azure (cloud-native and hybrid architecture)Required8YearsExperience with Docker and azure cloud services such as AKS, Azure functions, Azure Container Service, Azure App services, Azure API ManagementRequired5YearsExperience working with Azure Data factory, Azure Data LakeRequired2YearsExperience in SaaS (Software as a Service) architectureRequired8YearsExperience with integration architecture and proven work experience with Agile/Scrum teamsRequired8YearsExperience with architecture engagement in Agile methodologies (SAFe and Scrum)Required8YearsExperience with Microsoft Power Platform (Power Apps, Power Automate, Dataverse) and Dynamics365Required2Years

Job Description Job Description: Jewett Automation is a fast-growing industrial automation and systems integration company seeking a Project Manager to lead and motivate teams of engineers and technicians to execute the design and construction of custom-engineered automation equipment. The successful candidate will be proficient with various factory automation systems and will thrive in a collaborative environment, demonstrating critical thinking, superior problem-solving, a strong work ethic, and excellent communication and organizational skills. This is an exempt position with benefits reporting to the Director of Project Management. The compensation will be commensurate with experience. The position is based in Richmond, Virginia, and requires regular onsite, in-office presence, with travel expected as needed to support project execution, factory and site acceptance testing, and customer engagements. Responsibilities: • Build Jewett Automation’s brand as a customer-focused company by delivering exceptional customer service and timely responses., • Manage projects to achieve a defined schedule, scope, and budget., • Own schedule planning and execution, ensuring all project activities align with committed customer and internal delivery dates., • Analyze financial trends (labor burn, material consumption, ETC, EAC) to anticipate risk, • Identify potential project risks and lead the development of mitigation plans., • Be the customer’s point of contact on projects and communicate any changes between the customer and the project team., • Serve as the Voice of the Customer and primary customer interface, ensuring requirements, commitments, and changes are accurately represented, documented, and delivered., • Balance the quoted equipment and the customer’s changing needs to manage scope creep., • Provide project updates to the Customer and to Jewett Automation management., • Actively protect project margin through disciplined scope and cost management., • Collaborate across the organization to manage the development, evaluation, approval, and implementation of automation equipment designs., • Oversee product/machine construction and testing to ensure the project achieves the specified scope., • Work with procurement to understand how potential supply chain issues may impact the schedule. Qualifications/Skills: • Experience managing a portfolio of concurrent projects with a combined contract value of approximately $15 million., • 7+ years of experience as a successful project manager., • Demonstrated management experience within a manufacturing and custom equipment design-and-build environment., • Working knowledge of Project Management methods and processes., • Experience in managing and communicating project financials., • Experience in industrial automation, with robotics and automation machinery design background beneficial., • Strong fundamental engineering knowledge. An engineering degree or equivalent experience is a plus., • The successful candidate must demonstrate strong financial and commercial acumen within an engineer-to-order or capital equipment environment., • Proactive project leadership mindset, drives execution, resolves issues, and advances work rather than waiting to report status., • Execution-first orientation, prioritizes removing blockers, securing decisions, and pushing deliverables over passive reporting., • Demonstrated ability to represent the Voice of the Customer while balancing contractual, financial, and execution realities., • Excellent written and verbal communication skills., • Demonstrated history of successfully executing projects against committed schedule, financial, and scope targets., • Ability to travel during Site Acceptance Testing.

Job Description The Mechanical Assembly Technician is responsible for constructing/assembling mechanical parts and components to create new products according to client specifications, following blueprints and schematics to ensure correct build and quality. Additionally, this position performs diagnostic tests on assembled items and conducts adjustments when needed to make sure the final product functions efficiently and effectively. Roles and Responsibilities: Assembly Knowledge- • Minimum 10 years of proven experience in mechanical assembly within the automation and manufacturing industry., • Ability to understand and interpret mechanical assembly prints, pneumatic drawings and blueprints., • Comprehensive knowledge of mounting gearboxes, drive gears, servo motors and air cylinders for proper alignment and function., • Knowledge of precision measuring equipment: laser levels, calipers, micrometers, height gauge, machinist level, gauge blocks/pins and dial indicators., • Strong knowledge of manual mill and lathe with the ability to manufacture and modify parts efficiently, • Expertise in identifying, debugging, and troubleshooting issues in a timely manner., • Understanding different types of hardware and their uses and strength grades., • Effectively identify and troubleshoot issues in a timely manner., • Perform and lead debug activities during machine build, working with engineers and technicians to identify root causes and implement corrective actions., • Utilizing technical documentation (schematics, drawings, specifications, etc.), as well as hand tools (screwdrivers, soldering guns, drills, etc.), assemble, inspect, modify, and install (as required) mechanical components, framework, and tooling mechanisms, etc. that will be incorporated into machine assembly for clients., • Occasional mechanical rework of parts (cutting, grinding, drilling, tapping, etc.) may be required to complete assigned tasks., • Perform all assigned tasks in a limited amount of time while following quality limits and safety practices., • Conduct quality control checks to ensure products align with company and client standards., • Troubleshoot problems with equipment and/or components to determine proper operation or need for adjustments or replacement., • Maintain detailed records of a product’s development process, including but not limited to changes to construction documentation to reflect machine ‘as built.’, • Utilize E-Plan, a necessary, to add notes/adjustments, etc. (re-line) to reflect any changes/additions, etc., • Alter/adjust as-built schematic drawings for mechanical changes and provide to engineering department for updates., • Collaborate with colleagues (technicians, engineers, etc.) to create cohesive and effective products., • Identify and suggest productivity and/or quality improvements to supervisors and/or engineers., • Acts as a debug leader, providing directions to other technicians during troubleshooting and machine commissioning., • Participates with team to set and reach higher goals in execution of tasks and in gaining work-related knowledge., • Participates in strategy sessions with team to determine new or enhanced approaches for systems and processes that will enhance and improve customer experience and results., • Models development by continuously learning and applying new information about work-related knowledge and administrative activities., • Participates in formal continuing education through coursework, workshops, seminars, etc. that are approved and recommended by management, as well as are applicable areas in the field, including materials, processes, and methods., • Empowers others to always strive to do their best, set and reach higher goals, and maintain a continual attitude toward growing and gaining knowledge., • Attends and participates in team and/or company-wide meetings as required. Abilities Required (training, education, certifications, methods of task implementation): • 10+ years of proven experience in mechanical assembly within the automation and manufacturing industry., • Expertise in debug and troubleshooting methods, acting as a technical leader in this area., • Proven experience in mechanical assembly within the automation and manufacturing industry., • Ability to work in a fast-paced, multi-tasking, cross-functional environment., • Has a working knowledge of client standards and preferences., • Strong math abilities., • Ability to utilize basic computer tasks/functions (email, file directories, e drawings, etc.)., • Ability to utilize basic Google products (calendar, email, Google Plus, etc.)., • Capable of passing test to operate a forklift. Desired Characteristics (traits and behavior needed to perform job tasks with excellence and reflecting the values of your company): • Passionate about Jewett Automation organizational causes, growth, desired outcomes, etc., • Self-motivated with strong initiative., • Effective verbal communication skills: ask clarifying questions, participate in active listening, deliver clear and concise information, direction, or instruction., • Unwavering commitment to quality with exceptional attention to detail., • Maintain a clean, functional, and safe work area., • Thrives in a collaborative, team environment and can work independently when required/needed., • Positive and energetic disposition., • Process-oriented with ability to switch tasks easily., • Good decision-making abilities: determine issue variables and effective solutions in a timely manner., • Ability to acquire and retain knowledge/information quickly., • Strong analytical and problem-solving skills and practiced behavior., • Willingness to do any task assigned. Physical Requirements: • Ability to lift at least 50-75 lbs., • Ability to stand and/or sit a minimum of four hours at a time, using hands and arms to finger/handle/reach/feel., • Ability to work on a computer/laptop occasionally as needed., • Ability to maneuver around a shop environment and inspect/observe complex machines, including but not limited to climbing and working from ladders, lifts, etc., • Ability to travel approximately one week at a time throughout the year., • Work environment is factory/warehouse facility that is climate controlled; noise level in the work environment is low to moderate or high (on occasion).

Every day, we get opportunities to make a positive impact - on our colleagues, partners, customers and society. Together, we're pioneering the solutions of the future and unlocking the full potential of precious resources. Trusted to act on initiative, we challenge conventional thinking to develop world-leading technologies that inspire progress in vital areas, including energy, food, water and shipping. As we push forward, the innovative, open spirit that fuels our 140-year-old start-up culture and rapid growth also drives our personal growth. So, as we shape a more resourceful, less wasteful world, we build our careers too. About the job As an integral member of our team, you will play a pivotal role in the assembly of our gasket plate heat exchanger. You will assemble components together to build finished products, requiring strong manual dexterity, attention to detail, and ability to follow blueprints/instructions in a fast-paced setting. Key duties include using hand/power tools, performing quality checks, documenting processes, maintaining a clean workspace, and collaborating with teams, often involving repetitive tasks. This is important part of contributing to the overall success and growth of our organization. This is a 3rd shift position starting 10pm to 630am. As a part of the team, you will: \n • Receive daily work assignments from the Team Leader / Team Manager and execute production with Standard Operating Procedures and blueprints as a base.\n, • Report any deviations (Safety, Quality, Parts, Equipment, etc.) to Status Boards immediately and update the Team Leader / Team Manager.\n, • Be active and engaged into the Daily Status Board Meetings by explaining the deviations and propose solutions.\n, • Review & suggest any improvements for the Standard Operating Procedures.\n, • Look into your own areas for waste (time, motion, transportation, inventories etc.) elimination opportunities and drive KAIZEN improvements.\n, • Engaged in daily & weekly 5S routines to achieve high 5S Standard and Sustain it.\n, • Constantly look for the cross-training opportunities within different manufacturing processes & better ways to add value.\n, • Use the downtime efficiently to learn the new processes & run improvements from the status board activities.\n, • Accurately records data on quality documentation, components and product per company standards and/or customer requirements\n, • Participates in the team's continuous improvement and development in accordance with the Alfa Laval Production System (ALPS). Examples include 5S, Problem resolution process (PRP), and Total Preventative Maintenance (TPM).\n, • Using the SOP Matrix, will cross train to support any and all department or factory demands, as required.\n, • Will be trained and must pass Industrial Vehicle Test (Crane, Forklift, Joey)\n, • Lift raw materials, finished products, and packed items, manually or using lifts.\n, • Accurate & Consistent use of Personal Protective Equipment (Safety Glasses, Steel Toe Shoes, Gloves, Uniform others as required by the specific process)\n\n At Alfa Laval, we pride ourselves on creating an inclusive and dynamic workplace that values diverse perspectives and experiences. While we typically welcome applicants from all locations, currently, we are prioritizing candidates who reside in the US or have an established presence in the area. What's in it for you? We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval's future success. Our benefits-eligible associates enjoy healthcare, dental and vision plans, a robust wellness program, generous 401(k), paid holidays, paid time off benefits, and more. The current hourly rate for this position is 23.50 hourly in addition to a shift differential of 1.00. Alfa Laval is an equal opportunity employer. We are committed to building an inclusive and diverse workforce. All employment is decided on the basis of qualifications, merit, or business need, without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. EEO/Vet/Disabled Employer

Every day, we get opportunities to make a positive impact - on our colleagues, partners, customers and society. Together, we're pioneering the solutions of the future and unlocking the full potential of precious resources. Trusted to act on initiative, we challenge conventional thinking to develop world-leading technologies that inspire progress in vital areas, including energy, food, water and shipping. As we push forward, the innovative, open spirit that fuels our 140-year-old start-up culture and rapid growth also drives our personal growth. So, as we shape a more resourceful, less wasteful world, we build our careers too. About the job As an integral member of our team, you will play a pivotal role in the assembly of our gasket plate heat exchanger. You will assemble components together to build finished products, requiring strong manual dexterity, attention to detail, and ability to follow blueprints/instructions in a fast-paced setting. Key duties include using hand/power tools, performing quality checks, documenting processes, maintaining a clean workspace, and collaborating with teams, often involving repetitive tasks. This is important part of contributing to the overall success and growth of our organization. As a part of the team, you will: \n • Receive daily work assignments from the Team Leader / Team Manager and execute production with Standard Operating Procedures and blueprints as a base.\n, • Report any deviations (Safety, Quality, Parts, Equipment, etc.) to Status Boards immediately and update the Team Leader / Team Manager.\n, • Be active and engaged into the Daily Status Board Meetings by explaining the deviations and propose solutions.\n, • Review & suggest any improvements for the Standard Operating Procedures.\n, • Look into your own areas for waste (time, motion, transportation, inventories etc.) elimination opportunities and drive KAIZEN improvements.\n, • Engaged in daily & weekly 5S routines to achieve high 5S Standard and Sustain it.\n, • Constantly look for the cross-training opportunities within different manufacturing processes & better ways to add value.\n, • Use the downtime efficiently to learn the new processes & run improvements from the status board activities.\n, • Accurately records data on quality documentation, components and product per company standards and/or customer requirements\n, • Participates in the team's continuous improvement and development in accordance with the Alfa Laval Production System (ALPS). Examples include 5S, Problem resolution process (PRP), and Total Preventative Maintenance (TPM).\n, • Using the SOP Matrix, will cross train to support any and all department or factory demands, as required.\n, • Will be trained and must pass Industrial Vehicle Test (Crane, Forklift, Joey)\n, • Lift raw materials, finished products, and packed items, manually or using lifts.\n, • Accurate & Consistent use of Personal Protective Equipment (Safety Glasses, Steel Toe Shoes, Gloves, Uniform others as required by the specific process)\n\n At Alfa Laval, we pride ourselves on creating an inclusive and dynamic workplace that values diverse perspectives and experiences. While we typically welcome applicants from all locations, currently, we are prioritizing candidates who reside in the US or have an established presence in the area. What's in it for you? We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval's future success. Our benefits-eligible associates enjoy healthcare, dental and vision plans, a robust wellness program, generous 401(k), paid holidays, paid time off benefits, and more. The current hourly rate for this position is 23.50 hourly Alfa Laval is an equal opportunity employer. We are committed to building an inclusive and diverse workforce. All employment is decided on the basis of qualifications, merit, or business need, without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. EEO/Vet/Disabled Employer

We are seeking a Data Engineer with proven hands-on experience with the design and development of highly available data management platforms and solutions for both on-prem and Azure-based cloud environments. Develop and implement secure, scalable data pipelines using Azure Data Factory, Azure Functi

Part-time associates may also be eligible for paid time off, paid holidays and a 401(k) plan. Performing other tasks as assigned by manager from time-to-time. Part-time associates, based on hours worked, may be eligible for Burlington's benefits package which includes dental and vision coverage, and

At Burlington, we embrace the many facets of diversity that strengthen our communities where we live and work every day.If you want to grow your retail career with a caring and inclusive organization, come join us as a Burlington Stores Full-Time Customer Service Supervisor or Full-Time Selling Floo

Retail Sales Associate! Are you an outgoing, upbeat, people-person with great organizational skills? Would you thrive in a high-energy environment where associates work together to drive results? Is it important to you to make a difference in the community where you live and work?. Retail Sales Asso

Tuff Shed is recruiting for a Production Foreman to contribute to the success of our Factory Store in Richmond. DO YOU HAVE WHAT IT TAKES TO BE A SUCCESSFUL PRODUCTION FOREMAN?. Partner with direct supervisor and Shop Specialist to review production schedules, product deficiencies, labor performance

Part-time associates may also be eligible for up to 4 hours of paid time off annually after one year of service, up to 8 paid holidays, and paid sick time in accordance with applicable law. Location 00449 - Richmond Posting Number P1-1070012-10 Address 11609 Midlothian Turnpike Zip Code 23113 Positi

Pratt Industries - JobID: 27-20967 [Factory Worker / Utility Worker / Sanitation] As a Production Utility Worker at Pratt Industries, you'll: Perform a variety of tasks in the assigned department; Learn and comply with Pratt Industries quality procedures and policies; Stop bad quality from leaving t

We are hiring immediately for full time FOOD SERVICE WORKER/CASHIER positions.Make your application after reading the following skill and qualification requirements for this position.Location : VCUHS Chick-Fil-A - 1250 East Marshall Street, Richmond, VA 23298.Note: online applications accepted only.

We are hiring immediately for full time FOOD SERVICE WORKER/CASHIER positions.Make your application after reading the following skill and qualification requirements for this position.Location : VCUHS Chick-Fil-A - 1250 East Marshall Street, Richmond, VA 23298.Note: online applications accepted only.

Morning, Afternoon, Evening (Includes Weekends).At Wegmans, we’re on a mission to help people live healthier, better lives through exceptional food.So, when you bring your unique skills and your authentic self to Wegmans, you’re joining a team of difference-makers.Our promise to our customers is

We are hiring immediately for full time FOOD SERVICE WORKER/CASHIER positions.Location : VCUHS Chick-Fil-A - 1250 East Marshall Street, Richmond, VA 23298.Note: online applications accepted only.Schedule : Full time schedule; days and hours may vary.Requirement : Prior food service and customer s

Warehouse Delivery Driver Associate.It's an important hands-on role where you'll be key to giving Locke Supply's internal and external customers an outstanding experience.You will be responsible for the day-to-day warehouse operations, including material handling which includes stocking product, pic

We are hiring immediately for full time FOOD SERVICE WORKER/CASHIER positions.Location : VCUHS Chick-Fil-A - 1250 East Marshall Street, Richmond, VA 23298.Note: online applications accepted only.Schedule : Full time schedule; days and hours may vary.Requirement : Prior food service and customer serv

Morning, Afternoon, Evening (Includes Weekends).At Wegmans, we're on a mission to help people live healthier, better lives through exceptional food.So, when you bring your unique skills and your authentic self to Wegmans, you're joining a team of difference-makers.Our promise to our customers is sim

We are hiring immediately for full time FOOD SERVICE WORKER/CASHIER positions.Location : VCUHS Chick-Fil-A - 1250 East Marshall Street, Richmond, VA 23298.Note: online applications accepted only.Schedule : Full time schedule; days and hours may vary.Requirement : Prior food service and customer s

Warehouse Janitorial Associate/h2pKellermeyer Bergensons Services (KBS) has immediate full-time, permanent openings to join our Warehouse Janitorial Associate/Cleaning Crew Member.If you enjoy working in a fast-paced environment and helping make an impact on safety in the workplace, then this is the

We are hiring immediately for full time FOOD SERVICE WORKER/CASHIER positions.Location : VCUHS Chick-Fil-A - 1250 East Marshall Street, Richmond, VA 23298.Note: online applications accepted only.Schedule : Full time schedule; days and hours may vary.Requirement : Prior food service and customer serv

The main function of a warehouse worker is to receive, store, and issue materials, equipment, and other items from stockrooms, warehouses, or storage yards.Receive and count stock items, and record data manually or using a computer.Pack and unpack items to be stocked on shelves in stockrooms, wareho

We are hiring immediately for full time FOOD SERVICE WORKER/CASHIER positions.Location : VCUHS Chick-Fil-A - 1250 East Marshall Street, Richmond, VA 23298.Note: online applications accepted only.Schedule : Full time schedule; days and hours may vary.Requirement : Prior food service and customer serv

Join Office Pride Commercial Cleaning Services.Do you believe in doing what is right? Do you believe companies should promote from within? Do you believe in exceeding expectations? Office Pride Commercial Cleaning Services, one of the nation's top janitorial companies, believes in these values and i

We are hiring immediately for full time FOOD SERVICE WORKER/CASHIER positions.Location : VCUHS Chick-Fil-A - 1250 East Marshall Street, Richmond, VA 23298.Note: online applications accepted only.Schedule : Full time schedule; days and hours may vary.Requirement : Prior food service and customer serv

Tucker Door & Trim is a well-respected wholesale distributor and manufacturer of doors, windows, and specialty millwork to the construction industry.We are growing and want you to be part of our team.Our employees build complete door or window packages.We have an immediate opening for a Material Han

If you're a neat freak who gets satisfaction from making something shine, a Cleaning Team Member is the perfect role for you! Keeping our stores in tip-top shape for customers is important to us, making you a very valuable member of our work fam!.Made-to-Order isn't just our approach to foodit's how

Schedule: Part time Availability: Morning, Afternoon, Evening (Includes Weekends).Age Requirement: Must be 18 years or older Location: Henrico, VA Address: 12200 Wegmans Blvd.Job Posting: 02/03/2026 Job Posting End: 02/27/2026 Job ID: R0272069 we are a food market where you make the difference At W

Urban Air is seeking proactive and meticulous individuals to join the team as Sanitation Team Members.Qualifications and Requirements.Part-time and full-time positions available.Must have a reliable form of transportation to and from the park.Must possess the ability to work at least 15-20 hours per

FleetPride is the largest after-market distributor of heavy-duty truck and trailer parts in the U.Partner with the best in the heavy-duty industry and apply today!.Provide customer service through the delivery and/or pick-up of parts and other products.Unload products from shipping vehicles and stor

Our client, a retail pharmacy company, is looking for a warehouse worker 3 for their Mechanicsville, VA location.The main function of a warehouse worker is to receive, store and issue materials, equipment and other items from stockroom, warehouse or storage yard.Receive and count stock items, and re

Weigh, wrap, and package products according to customer requirements.Access and interpret product information using a computer terminal.Ensure all products are properly wrapped and protected for shipment.Palletize and band finished products for shipping.Operate warehouse tools and equipment includin

AdvanSix plays a critical role in global supply chains, innovating and delivering essential products for our customers in a wide variety of end markets and applications that touch people's lives, such as building and construction, fertilizers, plastics, solvents, packaging, paints, coatings, adhesiv

The Material Handler moves product and material safely and efficiently in the die cutting area and bailer room using a forklift and other material handling equipment.Also responsible for organization of material and cleanliness of plant floor.

Must be able to work a rotating shift scheduled, 6am-6pm and 6pm to 6am.Warehouse team will have knowledge of the daily warehouse functionality to include shipping and receiving, material handling, performing quality inspections on packaged material, the ability to operate packaging machinery and lo