Mechanical engineering jobs in San Bernardino, CaliforniaCreate job alerts

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff. Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements. Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience. ESSENTIAL FUNCTIONS:Incumbent must have the ability to: • Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation., • Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments., • Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements., • Provide public assistance at counter and over the telephone., • Prepare quantity and cost estimates for engineering projects., • Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes., • Review engineering plans to determine appropriate layout of construction projects., • Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades., • Make and check mathematical calculations related to surveying, drafting and basic engineering., • Maintain accurate survey records in the form of field notes and sketches., • Participate in a variety of engineering design and planning work related to municipal engineering projects., • Answer questions and provide information to the public concerning engineering activities., • Assist in development and maintenance of the record keeping and filing systems., • Prepare, assemble and distribute copies of maps, charts and blueprints., • Answer questions and provide information to the public concerning engineering activities. WORKING CONDITIONS: Position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, bending, and stooping in the performance of daily activities. The position also requires grasping, repetitive hand movement and fine coordination in preparing reports using a computer keyboard. Additionally, the position requires near and far vision when preparing and reading written reports and other work related documents. Acute hearing is also required when providing phone and counter assistance. EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of: Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of: • Terminology, methods, practices and techniques of drafting., • Trigonometry as applied to the computation of angles, areas, distances and traverses., • Elementary surveying techniques and practices., • Engineering maps and records.Ability to:, • Perform moderately complex engineering and mathematic calculations with speed and accuracy., • Understand and follow written instructions and sketches., • Use and care for drafting, surveying, and mechanical instruments and tools. Education: Equivalent to completion of the twelfth grade supplemented by specialized training in drafting, surveying or a related field. The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits. Please to view our excellent employee benefit options. 01 What is your highest level of education? • High School graduate or equivalent, • Some college, • Trade school graduate or Apprenticeship, • Associate's degree in related field, • Bachelor's degree in related field, • Bachelor's degree or higher in non-related field, • Equivalent to Bachelor's degree in related field, • Master's degree or higher in related field, • None of the above 02 Please indicate how much experience you have in performing drafting and technical engineering work., • No experience, • Less than one (1) year., • One (1) year or more year(s) but less than two (2) years., • Two (2) or more years but less than four (4) years., • Four (4) or more years but less than six (6) years.

• Job Identification 116505, • Job Category Operations, • Posting Date 03/06/2026, 10:21 PM, • Locations 10685 Beech Ave, Fontana, CA, 92337, US (On-site), • Job Schedule Full time, • LinkedIn Recruiter Tag #LI-CB2 The Operations Planner will be responsible for establishing weekly and monthly requirements to support the plant sales forecast, throughput requirements and targeted inventory levels. Ensures goods manufactured are produced in a cost-effective way that meets quality specifications. Improves a company's production and distribution processes. Responsible for making sure the schedule is followed during production. ESSENTIAL DUTIES AND RESPONSIBILITIES Duties and responsibilities include the following: other duties may be required and assigned at any time. Responsible for increasing manufacturing speed, reduction of lead times, and controlling operating costs through the application of Theory Of Constraints (TOC) and maximization of daily throughput. Responsible for creating monthly revenue plan based on customer demand and goals of the organization. Responsible for meeting weekly shipment targets. Responsible for on time delivery performance to customer requirements. Works closely with the inside sales and inside shipping departments to identify and mitigate risks to ensure product ships as planned. Coordinate with outside shipping for any revenue related drop ships. Collaborates with various departments, including management, to align goals and priorities. Will perform back up responsibilities for various outside processing planners when needed. Other duties as assigned. , To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. A highly organized and detail-oriented individual who knows how to manage overlapping projects, keep track of deadlines, and efficiently uses their time. Are strong analytical thinkers with problem-solving skills and mathematical abilities, with great communicators who are persuasive and good at presenting information. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Bachelor of Science degree - Engineering discipline. Preferably 1-2 years of experience in a manufacturing environment. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as Throughput, Productivity, Overtime Hours, and Cost. Ability to apply concepts of basic mathematics. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. COMPUTER SKILLS Proficient in Microsoft Office Suite CERTIFICATES, LICENSES, REGISTRATIONS N/A PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and reach with hands and arms. The employee frequently is required to stand; walk; use hands, talk and hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually low. PAY RATE $75K- $80k , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

Job DescriptionSalary: $30 - $35 DOE About Us: Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions to produce clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfill and reduction of greenhouse gases for customers across the municipal, industrial, commercial, and agricultural sectors. Headquartered in Burlington, ON, and through its multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted at more than 1,600 installations globally. Company Description: Anaergia is a global leader in the production of clean energy, fertilizer, and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial and agricultural markets. Anaergia's integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Facility Description: Anaergia's Rialto Bioenergy Solutions facility converts organic waste streams into renewable electricity, and fertilizer products which would otherwise be destined for landfill disposal. Additionally, the facility utilizes four combined heat and power engines to generate electricity and a 2MWH battery bank. Job Description: Reporting to the Facility Manager, assess and maintain the plant equipment as needed to ensure the plant meets key performance indicators. Goals: • Safety- Develop and maintain a world class culture of safety to be adhered to by all employees and contractors at the site., • Compliance - Maintain an immaculate compliance record with all regulatory and governmental agencies., • Championing company's policy frame work - Support the development of the Company's Vision Statement and the Company's strategy defining the Standards and code to be practiced, providing resources and implementing HR practices, site security and monitoring, Standard Operating Procedures (SOP) and Work Instruction (WI) around operations, maintenance, production, accounting, safety, environmental monitoring and reporting, documentation, and record keeping; Support establishment and implementation of facility policies, goals, objectives and procedures that are in line with the Company's Vision Statement and Strategy conferring with other management team members as appropriate., • Budget and Revenue Support meeting the Facility annual financial and commercial targets. Support reporting on monthly P&L and optimize profitability through operational and maintenance efficiencies and revenue enhancements that will result from market conditions., • Leadership - Abide by all internally established control systems and authorities; Lead by personal example and encourage all employees to conduct their activities in accordance with all applicable laws and the Company's standards and policies, including its safety and health and environmental policies., • Human Resources Support implementation of performance incentive plan, keep high employee engagement and morale, minimize staff turnover, establish accountability expectations, develop leaders, support effective recruiting and staffing., • Reporting - Effective reporting to help the Facility Manager, Director of Operations and VP of Plant Operations draw conclusions, make inferences, and elicit crucial decisions., • Follow PM schedule, routine field inspection of all equipment, complete daily site-walk to ensure equipment visual health, completing routine greasing and oil top up runs, and filling completed preventive maintenance work requisition/ Job Order completion on CMMS., • Monitor and operate plant process equipment in accordance with SOPs and safe industry practices., • Collect production data and adjust plant operating conditions from SCADA and in the field to achieve plant production plans and goals. Examples of production data would include but not be limited to lab analysis, plant SCADA historian data, and field logs., • Implement all site safety procedures and ensure contractors and coworkers are following safe work procedures and protocols., • Identify Spare parts, and consumables procurement need and prepare requisition for approval., • Provide support to Maintenance Technicians to develop their skills further., • Support in stacking up of all spares, tools, and consumables (Oil, Grease, Seals, Bearings etc.) maintaining records, availability of spares on time., • Develop and maintain skills such as using forklift, hoists, cranes, and hand and power tools, examining form and texture of parts., • Inspecting and collecting information on parts/pipes and other equipment utilizing rulers, calipers, and other measuring instruments., • Follow all safety SOPs and support in fabrication of temp lines, pipes, patchwork, weld / grinding or cutting work on site., • Providing cleaning of equipment as necessary, • Ensure all calibration records for crane, lifting devices etc. are always up to date and kept in records., • Inspects and tests eye wash stations, fire extinguishers, and other life safety systems including PPE., • Maintains safe and clean working environment by complying with procedures, rules, and regulations. Works in a clean manner., • Contributes to team effort by accomplishing related results as needed., • Flexibility in working longer hours/overtime or weekend work will be needed., • Any additional tasks requested by Facility Manager to effectively operate and maintain the facility in a safe, reliable, and efficient manner. Job Requirements: • Graduation from high school or GED equivalent., • BS with technical focus or trade school certification, • Must possess a valid driver's license and a satisfactory driving record, the ability to become mobile crane certified, manlift and forklift certified. Skills: • Ability to understand and show competency to effectively operate integrated plant systems., • Ability to process analytical plant production data to determine correct course of actions in plant operations., • Have the ability and capability read blueprints, technical manuals and engineering specifications to maintain and fix equipment., • Identify the tools, equipment necessary for repair and maintenance work., • Identify parts and other materials required to maintain and fix equipment., • Perform basic diagnostic testing of pumps, compressors, conveyors, screws, and other large industrial machinery., • Ability to check machine performance, dismantle machines and remove parts for repair using hand tools, chain falls, jacks, cranes, or hoists., • Test damaged parts in comparison to specifications. Replace the damaged and worn parts if necessary., • Reassemble machines after the completion of repair or maintenance work., • Clean and lubricate machinery including changing oils when required., • Listening to equipment to understand variances and possible problems., • Ability to maintain records of repair and maintenance work using CMMS system., • Capabilities to lead contract mechanical work activities outside the capabilities of our local staff. For additional information on Anaergia, please visit As an Equal Opportunity Employer, Anaergia provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Anaergia will provide reasonable accommodations for qualified individuals with disabilities.

Job DescriptionSalary: OMT I - $30 - $35/hr, OMT II - $35-$40/hr, OMT III - $40-$48/hr About Us: Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions for the production of clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfill, and reduction of greenhouse gases for customers across the municipal, industrial, commercial, and agricultural sectors. Headquartered in Burlington, ON, and through its multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted at more than 1,600 installations globally. Job Responsibilities: • Operations & Maintenance of CHP (Combined Heat & Power) systems is a primary responsibility, • Follow PM (Preventive Maintenance) schedule, routine field inspection of all equipment, complete daily site-walk to assess equipment visual health, completing routine greasing and oil top-up runs, and filling completed PM/Job Order on CMMS, • Identify spare parts and consumables procurement needs and prepare requisitions for approval, • Familiar with basic electrical repairs and sensor troubleshooting, • Support in organizing spare parts, tools, and consumables (Oil, Grease, Seals, Bearings, etc.); maintaining records, and ensuring the availability of spare parts on time, • Dismantling of equipment such as blowers/pumps, • Develop and maintain skills such as using forklifts, hoists, cranes, and hand and power tools, and examining the form and texture of parts, • Inspecting and collecting information on parts/pipes and other equipment; use rules, calipers, and other measuring instruments, • Follow all safety SOPs and support in the fabrication of temp lines, pipes, patchwork, welding, grinding, or cutting work on site, • Cleaning equipment as necessary, • Ensure all calibration records for crane, lifting devices, etc., are always up to date and kept in records, • Inspects and tests eye washes and other life safety systems, • Maintain a safe and clean working environment by complying with procedures, rules, and regulations, • Ensure that the work area is kept clean, free of hazards, and is hygienic, • Team collaboration to achieve goals and objectives as needed., • Works as a backup operator as needed, • Flexibility in working longer hours/overtime or weekend work Job Requirements: Education and Experience • Graduation from high school or GED equivalent., • Has taken some training toward a licensed trade, • Must possess a valid driver's license and a satisfactory driving record, the ability to become mobile crane certified, personnel lift, and forklift certified. Technical Skills • Ability to read blueprints, technical manuals, and engineering specifications to maintain and repair equipment, • Identify the tools and equipment necessary for repair and maintenance work, • Identify parts and other materials required to maintain and fix equipment, • Perform basic diagnostic testing of pumps, compressors, conveyors, screws, and other large industrial machinery, • Ability to check machine performance, dismantle machines, and remove parts for repair using hand tools, chain falls, jacks, cranes, or hoists, • Test damaged parts according to specifications; replace the damaged and worn parts if necessary, • Reassemble machines after the completion of repair or maintenance work, • Clean and lubricate machinery, including changing oils when required, • Listening to the equipment to understand variances and possible problems, • Basic pipefitting capabilities, • Ability to maintain records of repair and maintenance work using the CMMS system, • Capable of leading contract mechanical work activities outside the capabilities of our local staff, • Ability to weld is an asset For additional information on Anaergia, please visit As an Equal Opportunity Employer, Anaergia provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Anaergia will provide reasonable accommodations for qualified individuals with disabilities.

Willdan has been a consistent industry leader for 60 years providing all aspects of municipal and infrastructure engineering, including building and safety, public works, public financing, planning, and construction management services. Our team of Building and Safety professionals maintain current certifications and attend training on a regular basis, to stay current with industry technologies and standards. Public Agency Resources (PARS), a subsidiary of Willdan Group Inc., is seeking an Engineer in Training (EIT) or Plan Check Engineer in San Bernardino, CA. Essential Duties and Responsibilities • Examines plans and specifications for buildings and structures for completeness and conformity with all code requirements for the following design elements: Architectural, structural, mechanical, electrical, plumbing, fire/life safety, energy conservation regulations (Title 24), Green Building Standards, accessibility and Egress., • Coordinates the review of plans with public agencies whose approval is necessary; itemizes required correction and modification and explains them to permit applicants., • When requested, authorizes the issue of building permits for plans that meet building code and ordinance requirements; calculates fees., • Advises and assists engineers, architects, contractors, builders, and the general public with interpretation and application of pertinent building regulations, state laws, and local ordinances., • Submits reports to jurisdictional Building Officials regarding workload and process statistics, new products or situations, and code interpretation issues., • Bachelor's degree in Structural or Civil Engineering (or related field)., • 3 years of experience in architectural or building plan review or an equivalent combination of training and experience., • Candidate will be required to have a PE license and ICC certification as a condition of hire if selected., • ICC Plans Examiner Certification (minimum Residential Plan Review Certificate)., • ICC Licensed Master Code Professional holding an ICC Commercial Plans Reviewer Certification., • Knowledge of building codes. Public Agency Resources participates in E-Verify.

The Quality Inspector will be responsible for performing visual inspections, using mechanical measuring tools, and verifying product quality against engineering drawings and specifications. Job Title: Quality Inspector (1st Shift). We’re looking for a skilled Quality Inspector to join our 1st

The Quality Inspector will be responsible for performing visual inspections, using mechanical measuring tools, and verifying product quality against engineering drawings and specifications. Job Title: Quality Inspector (1st Shift). We’re looking for a skilled Quality Inspector to join our 1st

Ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; trou

The GMT2 is responsible for repairing, maintaining and installing all types of Mechanical and electrical systems for production equipment, support equipment and facilities.Insures work performed is in compliance with recognized Standard Codes, OSHA regulations and any engineering plans and documents

The GMT3 is responsible for repairing, maintaining and installing all types of Mechanical and electrical systems for production equipment, support equipment and facilities.Insures work performed is in compliance with recognized Standard Codes, OSHA regulations and any engineering plans and documents

Job Description Summary: A commercial mechanical contractor is seeking a Service Project Engineer to support MEP service and construction projects. This role is ideal for someone who is detail-oriented, organized, and capable of coordinating technical activities across engineering, purchasing, construction, fabrication, and field operations. You will assist Project Managers on complex mechanical projects while gaining experience in estimating, scheduling, design support, and project delivery. Key Responsibilities: * Support Project Managers with coordination between engineering, accounting, purchasing, fabrication, and field teams * Process RFIs, submittals, daily reports, procurement logs, and other project documents * Coordinate material procurement, delivery schedules, installation procedures, and subcontractor support * Assist with planning, scheduling, labor tracking, cost tracking, and project forecasting * Conduct job walks and help resolve installation or design challenges * Attend kickoff meetings, progress meetings, and OAC meetings * Maintain clear communication with clients, subcontractors, suppliers, and internal teams Qualifications: * Bachelor’s degree in Engineering, Construction Management, Mechanical Engineering, or related field, or 3–5 years of mechanical/MEP industry experience * Strong communication and organizational skills * Ability to support field teams and project management in a fast-paced environment * Professional demeanor and strong relationship-building abilities * High integrity and willingness to learn Compensation + Benefits: * Hourly rate based on experience * Medical, dental, and vision benefits * Paid vacation, holidays, and sick time * 401(k) plan * Development and long-term growth opportunities

Job Description Join North Coast Container (NCC) as a Mechanical Engineer and become part of a dynamic manufacturing team where innovation and quality drive everything we do! This onsite position in vibrant Rialto, California offers the opportunity to work on cutting-edge projects that shape the future of industrial packaging. Benefits: Medical, Dental, Vision, 401(k), Life Insurance, Paid Time Off, and more. About Us North Coast Container is the leading independent manufacturer of steel drums in North America, recognized for our unwavering commitment to quality, value, and customer service. What You'll Do As a Mechanical Engineer at NCC, you will: • Design and develop mechanical components and systems using SolidWorks for CAD drawings and 3D modeling., • Maintain and optimize production processes to improve efficiency, safety, and sustainability., • Collaborate with plant teams and management to implement continuous improvement initiatives., • Support equipment procurement, installation, and troubleshooting., • Apply Lean principles to streamline operations and reduce waste., • Ensure compliance with safety standards and quality requirements across all projects., • Travel expectation: You will be expected to travel up to 25% as part of your role.What We're Looking For, • Education & Experience:, • Bachelor's degree in Engineering., • Minimum 10 years of relevant experience in mechanical engineering or manufacturing., • Technical Skills:, • Strong knowledge of mechanics, metal forming, and finishing processes., • Proficiency in 3D modeling and CAD design (SolidWorks required)., • Experience with manufacturing equipment procurement and installation., • Familiarity with Lean tools and applications., • Soft Skills:, • Excellent communication and problem-solving abilities., • Ability to work collaboratively in a fast-paced environment.Physical Requirements, • Ability to distinguish colors for quality control (frequent)., • Occasional bending, stooping, and light lifting. Job Posted by ApplicantPro

Job Description Job Title: Sr. Electrical Engineer Department: Electrical Engineering Reports To: STL of Electrical Engineering FLSA Status: Exempt SUMMARY: This position requires excellent skills in the areas of design, test, and written as well as verbal communications. The ability to take a complete complex tasks on schedule with moderate supervision is required. A high degree of self-motivation, the ability to learn new skills and derive creative solutions with minimal training, are essential. ESSENTIAL DUTIES AND RESPONSIBILITIES Design, Test, Integration, and Installation Evaluation Factor - 60% • Develop new design, test, integration, and installation concepts and techniques capable of improving performance and reducing cost., • Execute design, test, integration, and installation tasks in accordance with project team objectives and requirements. Assist and mentor other engineers in completing their assignments., • Coordinate assignments with the other project team members (including the team leader, mechanical, electrical, field service, and software engineers, technical writers and equipment users)., • Improve documentation procedures in compliance with Client standards. Project Development Activities Evaluation Factor - 30% • Develop innovative concepts and techniques for satisfying customer needs and requirements., • Ensure technical specifications neither understate or overstate customer needs and requirements., • Ensure project development plans realistically address risks and problems as well as requirements., • Ensure project development costs and schedules are commensurate with project complexity and risks., • Assist proposal preparation and editing. Lead internal teams created to define, improve, and promote day-to-day operations and achieve Client objectives Evaluation Factor - 5% • Other duties as assigned, • Work schedule may vary to accommodate equipment availability or needs., • Occasionally support the resumption of patient treatment by assisting the Field Service Team by telephone or in person. Immediate pager response is expected while at work, and within a reasonable time while away. QUALIFICATIONS • The ideal candidate must be able to present information clearly and efficiently between team members verbally and in writing., • Highly developed planning and organizational skills are required., • Demonstrated abilities in analog and/or digital design from conceptual stages through manufacturing are required., • Experience with PCB design is desired., • The ideal candidate will also have experience using high end EDA tools (VeriBest) along with Matlab, Mathmatica and MathCad., • The successful candidate must have excellent writing and organizational skills and be able to efficiently document every state of a project. SUPERVISORY RESPONSIBILITIES • Not applicable EDUCATION AND EXPERIENCE • BSEE from a four-year college or university with 4 years of experience, or equivalent combination of education and experience. LANGUAGE SKILLS • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Ability to write reports, business correspondence, and procedure manuals., • Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS • Ability to comprehend and apply principles of advanced calculus, modern algebra, and advanced statistical theory., • Ability to work with concepts such as limits, rings, quadratic and differential equations, and proofs of theorems. REASONING ABILITY • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS • Lift up to 25 pounds. WORK ENVIRONMENT

Job Description Magnolia is looking for an Electrical Technician for the 2nd shift, with experience in Industrial Bakery and Tortilla. SUMMARY OF FUNCTIONS: Ensures the operation of the plant facilities, machinery, and mechanical equipment by completing preventive maintenance requirements on machines and installations, following diagrams, sketches, operation manuals, manufacturer’s instructions, and engineering specifications. DUTIES Some of the duties of this position are those described below. This job description does not state or imply that the duties listed are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. • Comply with all Plant, State and Federal OSHA, EPA, FDA, HACCP, and SQF regulations., • Ensures the operation of machinery and plant facility. Controls down time by informing production workers of routine preventive maintenance techniques, monitoring compliance., • Completion of plant weekly and production down day assignments and record all tasks in our maintenance preventive care form., • Perform routine and emergency service on Ammonia and Freon refrigeration equipment commonly found in industrial applications., • Share technical skills with new employees., • Determines dimensional requirements of parts by inspecting the used parts using rulers, calipers, micrometers, and other measuring devices., • Locate sources of problems by observing mechanical devices in operation, listening for problems, using precision measuring, and testing instruments. Removes defective parts and adjusts functional parts by dismantling and assembling devices., • Fabricates repair parts by using machine shop instrumentation and equipment., • Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level., • Comply with the quality assurance regulations, SQF, and food safety., • Maintains a safe and clean working environment by complying with the procedures, rules, and regulations., • Maintains technical knowledge by attending educational workshops., • Dress appropriately and wear all required personal protective equipment assigned (PPE)., • Use lockout/tag out devices and procedures as required., • Compliance with the quality system, food safety, and SQF procedures.

Job DescriptionSenior Electrical Engineering ManagerTarget Starting Base Salary: $180,000-$210,000/year (+15% Annual Bonus)LA, CARelocation assistance will be offered to qualified candidates. OverviewWe are seeking an experienced Senior Electrical Engineering Manager to lead a multi-site electrical engineering organization responsible for the design, development, and testing of medium-voltage switchgear, PDUs, relay/control systems, and substation-related equipment. This is a high-impact technical and leadership role overseeing a team of approximately 15 engineers and technical staff across the U.S. and Canada. The ideal candidate is both a hands-on technical expert and a strategic leader with a strong background in switchgear, power distribution equipment, and UL/industry codes—paired with proven success elevating engineering processes, capabilities, and team performance. Organization BreakdownReporting to the Director of Engineering, the Senior Electrical Engineering Manager will provide technical direction, operational leadership, and strategic guidance for the electrical engineering function. This role partners closely with mechanical engineering, operations, testing, and project management to ensure high-quality, manufacturable designs and successful project execution. This leader will oversee teams in: • LA, CA: Assistant Engineering Manager, 8 Design Engineers, 1 Drafter, and Electrical Testing Manager, • Dallas, TX: 2 Electrical Design Engineers and 1 Electrical Test Engineer, • Serve as the technical SME for switchgear, PDUs, substation engineering, and UL/ANSI/IEEE/NEC standards., • Define and execute long-term engineering strategies aligned with organizational goals and industry advancement., • Guide the design, development, testing, and validation of electrical systems—including switchgear, substation control equipment, protection & control systems, and power distribution products., • Stay current with emerging technologies, tools, and industry trends.People Leadership & Development, • Lead, mentor, and grow a distributed team of electrical design engineers, test engineers, a subordinate team manager, and technical support staff., • Build capability and consistency across sites through onsite coaching, training sessions, and technical reviews., • Support recruitment, onboarding, career development, and team succession planning., • Foster a culture of innovation, accountability, and continuous improvement.Operational Excellence & Process Improvement, • Drive scalable engineering workflows and implement best practices across all locations., • Improve standardization in design processes, documentation, and testing methods., • Partner with mechanical engineering, manufacturing, project management, and production to enhance design for manufacturability and reduce rework., • Manage engineering project schedules, budgets, and resource allocation.Cross-Functional Collaboration, • Represent engineering in customer engagements and support strategic customer initiatives., • Work closely with business development to address customer needs and drive product reliability and satisfaction., • Bachelor’s degree in Electrical Engineering (or related field)., • 10+ years of progressive electrical engineering experience, including at least 5 years in a leadership role., • Deep technical expertise with medium-voltage switchgear, power distribution equipment, PDUs, and substation systems., • Strong knowledge of UL, ANSI, IEEE, NEC, and similar codes/standards., • Proven track record leading engineering teams and delivering complex electrical projects., • Experience driving process improvements within engineering or manufacturing environments., • Ability and willingness to travel regularly to Dallas and Ontario during the workweek., • Experience in an OEM environment (preferred) or in the utility/power distribution sector., • Master’s degree in Engineering or Engineering Management., • Professional Engineer (PE) license.

Job DescriptionJob Title: Quality Inspector (1st Shift) Location: Fontana, CA Pay: $24-27/hour DOE (7am-3:30pm) M-F About Us: We are a leading manufacturer dedicated to delivering high-quality power distribution products to our customers. Our team values precision, attention to detail, and a commitment to continuous improvement. We’re looking for a skilled Quality Inspector to join our 1st shift team and help ensure our products meet the highest standards. Position Overview: The Quality Inspector will be responsible for performing visual inspections, using mechanical measuring tools, and verifying product quality against engineering drawings and specifications. This role plays a key part in maintaining product consistency and supporting a culture of quality on the shop floor. Key Responsibilities: • Perform visual inspections of incoming, in-process, and finished products., • Use precision measuring tools (calipers, micrometers, oscilloscopes, etc.) to ensure products meet specifications., • Read and interpret blueprints, schematics, and work instructions to verify quality requirements., • Document inspection results accurately and report non-conformances., • Collaborate with production and engineering teams to resolve quality issues., • Maintain inspection equipment and ensure calibration is up to date., • Follow safety and quality procedures at all times.Qualifications:, • Prior experience in quality inspection, manufacturing, or a similar role preferred., • Ability to read and interpret blueprints, schematics, and technical drawings (strong plus)., • Proficiency with mechanical measuring tools (calipers, micrometers) and basic test equipment (oscilloscopes)., • Strong attention to detail and problem-solving skills., • Good communication skills and ability to work well with others., • Basic computer skills for data entry and documentation.