Mechanical engineering jobs in Modesto, CaliforniaCreate job alerts

Job Description Job Description SummaryThe Reliability Engineer will work closely with Sibelco plant maintenance, production and leadership teams to develop and utilize effective tools and systems for measuring reliability of our production process. This position is responsible for providing engineering support for maintenance planning/supervision, operation and maintenance of Sibelco North America Processing plants, developing and implementing programmatic methods to ensure safe operation and high equipment reliability/availability, cost effective maintenance, and continuous improvement culture. This role includes applying lean maintenance strategies and predictive technologies while optimizing a system’s operational performance, life cycle cost, and payback. This role will act as primary liaison for capital projects with the Capital implementation team for all cluster plants. Responsibilities Safety • Achieve safety and health objectives., • Leads and is responsible for the execution of reliability excellence/maintenance program. Writes and maintains reliability maintenance strategy documents., • Work with Maintenance Planners/Supervisors to implement Lean manufacturing tools to empower employees and facilitate growth to improve financial performance., • Responsible for ranking the criticality of the assets under their care, typically using Reliability Centered Maintenance approaches, and for defining the proactive maintenance approaches that are cost-beneficial to the business., • Identifies and implements predictive maintenance technologies. Manages predictive maintenance equipment., • Performs/supports operational event and equipment failure investigations to ensure that the root cause/causal factors have been identified, corrective actions prescribed, and follow-up monitoring conducted as applicable, to determine effectiveness., • Conducts program and system/equipment audits on a periodic and as needed basis. Audits will generally be focused on safety, risk analysis, regulatory compliance, maintenance effectiveness, cost savings, and energy conservation., • Participates in the planning, design review, value management and construction document development of new facilities and renovations. Supports utility distribution, master planning, and business continuity planning., • Develop and maintain new “Key Performance Indicators" of equipment reliability., • Lead in maintenance improvement tools (PM Optimization, RCM, RCA, RCFA, FMEA, etc.) and knowledgeable in predictive maintenance tools, • Maintain a high level of technical competency in advanced maintenance technology., • Maintain equipment repair history and evaluate repair costs & trends., • Analyze equipment failure data patterns and interpret ERP PM maintenance data to generate priorities and action lists for improving reliability of site., • Track the performance of reliability improvements to determine their effectiveness and make additional modifications if required., • By working closely with the local Maintenance Teams, use intervals for potential failures to appropriately prioritize, plan, and schedule to minimize downtime., • Develop solutions to repetitive, chronic, or costly failures and other maintenance problems, and apply value analysis to repair/replace, repair/redesign, and make/buy decisions., • Assist in troubleshooting techniques for major/repetitive equipment., • Advise the Maintenance Supervisors/Managers of any problems or potential problems which affect the ability of the operation to produce in a safe and efficient manner., • Monitor and report on all relevant maintenance activity KPI’s including wrench time analysis., • Perform other duties as assigned. Competencies (Reference : Sibelco (Leadership) Competency Model) Decision Making • Accurately determines the complexity of tasks and projects and required resources, • Breaks down projects or assignments into different steps (group of activities), • Sets priorities and time parameters to accomplish tasks and projects, • Actively uses the practices, processes, and procedures within the operating model to get things done, • Organizes people and activities for simple and complex processes in an effective way, • Consistently fosters collaboration across the organization, • Builds strong inclusive relationships across Business/Functions and levels, • Enables and empowers people to give their best, • Makes the link between what drives people and the organizational goals, • Stays composed and navigates through change effectively, • Leads others to operate effectively in absence of clear structure and processes, • Comfortable in making decisions and taking actions, even with incomplete information, • Handles risk and uncertainty comfortably (Technical) Capabilities Industry knowledge • Practical knowledge of engineering principles applied to design, operation and maintenance of building structures and mechanical and electrical equipment for buildings., • Experience w/ predictive maintenance technologies including, but not limited to, vibration analysis, oil analysis, infrared Thermography, ultra sound and motor current analysis., • Open minded, • Team player, • Pro-active, • Able to work independently, • Diplomatic, • Self-motivated Educational Background and prior professional experience Language requirements • Minimum 10-15 years engineering/industrial maintenance experience, including experience with mechanical design/testing, international quality standards., • Minimum 5 years utility systems/management and/or facilities/plant management and maintenance. Experience in the Glass industry is preferred., • Certified Plant Engineer or Certified Maintenance Reliability Professional is preferred., • English – proficient verbal & writing

Job DescriptionDescription: Job Title: Operations Supervisor- Retail & Ingredients Shift: Morning, Monday-Friday, 6:00am-3pm, subject to change depending on company's needs. Pay Rate: $75k-$85k, DOE. Summary: Operations Supervisor is to oversee the roaster, nut butter line, and packaging lines to meet productivity goals. This role is responsible for effectively leading operators and other personnel and working with the engineering and sales team to ensure efficient scheduling and high-quality products are produced. Essential Functions: • Direct and supervise all processes that produce products to customer specifications., • Direct and supervise the accurate completion of all documentation and records., • Collaborate with management to gain optimum plant effectiveness with production planning and meeting KPI targets., • Ensure the Order Fulfiller completes weekly and monthly inventory, submits material purchase requisitions and coordinates with management for proper material production planning., • Scheduling department personnel and time-card management. Resolve personnel problems by analyzing data, investigating issues, identifying solutions, and recommending administrative actions., • Visually inspect products and/or operations to ensure the quality of products inbound and outbound., • Work directly with other departments such as Sanitation, Maintenance, and Quality to implement effective changes and strategies to increase productivity., • Proficiency in Microsoft Excel and Microsoft Office programs for daily production reporting., • Ability to write instructions, standard operating procedures and evaluate job hazards to promote training and improve repeatability of process results., • Coordinate with Receiving department to ensure timely delivery and availability of production raw and pasteurized materials., • Participate in continuous improvement team initiatives and employs A3 corrective action plans to enhance equipment reliability and efficiency. Implement best practices and innovative solutions to optimize roasting and nut butter processes., • Maintain proper housekeeping in all assigned areas with machinery/equipment., • Works with Maintenance Supervisor and contractors to coordinate preventative maintenance services on auxiliary equipment and generate maintenance work requests., • Follows and ensures adherence to established Grower Direct Nut Company’s, local, state, and federal regulations and requirements as well as food safety, sanitation, food production and nutritional guidelines., • Data collection and reporting as needed., • Provide training to operators and ensure training occurs on relevant industry processes and equipment operations safety., • Generally, works in a plant environment but will be required to perform some job duties inside a typical office setting., • Ability to work long hours while standing or operating equipment., • Ability to work in areas involving high temperature and humidity., • Ability to move/lift objects and materials of at least 40lbs., • While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic., • May work around wet or humid conditions, in precarious places with hot and chilled water, airborne particles, outdoor weather conditions, extreme cold (non-weather), extreme heat (non-weather), risk of electrical shock, and/or risk of vibration. Requirements: Qualifications/Skills: 1. Minimum of High School Diploma., 2. 5+ years of supervisory experience in manufacturing., 3. Strong leadership skills., 4. Ability to read, comprehend and write English; bilingual in Spanish is preferred., 5. Ability to multi-task, prioritize jobs and strong organizational skills., 6. Strong interpersonal and communication skills., 7. Must be a "team player" and able to work well with fellow employees., 8. Regular attendance required., 9. Must be able to work overtime and/or weekends as needed., 10. Must have a valid CA driver license without restrictions.

Job Description Kingspan Insulated Panels North America, a division of the Kingspan Group Plc headquartered in Ireland, is a global and trusted leader in the design, manufacturing, and supply of high-performance sustainable building products and solutions for the construction industry. As the most energy-efficient, cost-effective building envelope solutions, insulated metal panels are at the forefront of sustainability. We serve the architectural, commercial/industrial, cold storage and food processing markets, and are committed to delivering the most advanced building products on the market. Learn about our Planet Passionate initiatives: At Kingspan, our future success is based on the quality of our people, who's expertise and motivation have helped ensure that we remain at the forefront of the construction materials manufacturing industry. In joining Kingspan you become an important part of a growing organization with a reputation for innovative design and use of technology, technical expertise, product quality, service excellence, and dedication to sustainability. Ready to be part of our team? Career Advancement Opportunities Paid holidays and PTO. 2nd Shift, Monday - Friday, Overtime required as needed Pay rate starting at $38.00 plus a shift differential. We take into consideration an individual's background and experience in determining final salary - therefore, base pay offered will vary depending on geographic location, job-related knowledge, skills and experience. Discretionary Quarterly Performance Bonus We are looking for a Maintenance Technician for our Modesto, CA facility! Summary: Responsible for the repair, maintenance, and troubleshooting of equipment, and machinery. Perform regular inspections, identify issues, and carry out necessary repairs to ensure functionality and safety of all machinery. Essential Duties: Maintenance Responsibilities: • Work safely in conducting routine inspections and preventive maintenance on equipment and machinery., • Identifying and diagnosing equipment failures and performing necessary repairs., • Follow maintenance schedules and provide corrective action reports., • Strong problem-solving abilities with ability to troubleshoot complex issues effectively., • Analytical mindset for analyzing data and identifying trends to improve maintenance practices., • Ability to prioritize and manage multiple tasks while meeting deadlines. Technical Skills: • Proficient in analyzing and troubleshooting mechanical systems., • Familiarity with industry-specific equipment and machinery., • Ability to read and interpret technical drawings, and manuals., • Previous experience in maintenance engineering or a similar role is preferred., • Knowledge of maintenance techniques, procedures, and best practices., • One year certificate from college or technical school., • Excellent communication and interpersonal skills to collaborate with team members., • Communication and Teamwork:, • Ability to work independently as well as in a team environment., • Flexibility to adapt to changing priorities and work under pressure., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Exert up to 30 lbs. of force occasionally, and/or up to 20 lbs. of force frequently, and/or a negligible amount of force constantly to lift, carry, push, pull, or otherwise move objects, including the human body. Involves sitting most of the time but may involve walking or standing for brief periods of time. **Kingspan is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to any factor, including veteran status and disability status, protected by applicable federal, state or local laws.

Job Description BKF is a multi-service infrastructure consulting firm providing civil engineering, construction management, environmental, planning, and surveying services across California, the Pacific Northwest, and beyond. With offices throughout California and the Portland area, BKF has served transportation, water resources, land development, government, and federal clients for over 110 years. At BKF, you’ll find a unique opportunity to grow your career with intention. Our culture values professional autonomy, innovation, and meaningful collaboration across offices. We are proud to be recognized with the Great Place to Work certification for the second year in a row. The Survey Chainman in the NorCal Region to assists the Chief of Party and/or Instrumentman with field surveying activities by operating and handling modern measuring equipment, setting points, recording accurate field notes, and supporting safe, efficient completion of survey tasks in accordance with applicable procedures and safety requirements. Responsibilities • At the direction of the Chief of Party or Instrumentman, sets out or observes distances and directions to predefined points or objects using mechanical measurement (e.g., calibrated steel tape) or electronic measurement using prism reflection, • Records field notes accurately in both written and electronic formats, • Cares for, maintains, calibrates, and adjusts precision surveying instruments, • Performs all survey activities in accordance with specific instructions and required safety policies, • Reads and interprets right-of-way maps, construction plans, survey notes, design plans, and other relevant technical information, • Completion of required courses and training hours as stipulated by the Northern California, Local 3 Joint Apprenticeship Party Chief Training Program, • Minimum of 2 years (4,000 work hours) of qualifying field experience, as defined by the Northern California Joint Apprenticeship Committee, • Thorough knowledge of algebra, geometry, and trigonometry as applied to office and field survey analysis; field surveying practices and techniques; and the use, capabilities, and adjustment of modern survey instruments, • General knowledge of civil engineering plans, maps, and specifications, along with an understanding of land survey maps, topographic maps, and field survey notes, • Works under total supervision, requiring direct first-line supervision of the steps necessary to perform the work, with periodic progress review. Makes routine survey and mapping decisions, and requires assistance with complex survey problems Physical Demands: Must be able to regularly talk, hear and operate a computer, keyboard and mouse and occasionally lift, pull/push and carry up to 20 pounds with accommodations. Work Conditions: Exposure to constant or intermittent sounds at a low or moderate level consistent with an office setting. Exposure to high-stress, fast-paced, deadline-oriented environment. Travel to other BKF locations and client sites may be required. Benefits • The typical base salary range for this position is $32.57-$54.28 hourly, annualized depending upon skills, experience, education, and geographical location. This is a salary position paid biweekly., • Competitive salaries, profit sharing, and 401k., • Generous paid time off packages., • 9 Paid Holidays., • Flexible schedules., • Education reimbursement, Paid annual dues for professional and societal organizations. BKF does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF, BKF reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited submittals are done at the risk of the recruiter. #LI-Hybrid

Job Description Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: • 100% employee-owned with 40+ years of industry history, • ENR (Engineering News Record) Top 500 firm Ideal Candidate Qualifications • Knowledge of programming and testing protection relays from GE, SEL, ALSTOM, SCHNEIDER, SIEMENS, and ABB. Ability to develop programming macros for use in automated relay testing, • Ability to understand AC and DC elementary diagrams, wiring diagrams and one-line drawings for the purpose of understanding system operation and developing testing requirements and procedures, • Develop standard testing documentation, training procedures and maintain all project documentation including certifications and calibration records. Candidate should be able to obtain NICET certification or equivalent, • Review specification and engineering drawings to understand the purpose and functionality of substation, • Directly witness or perform critical tests such as DC Functional Trip Testing prior to energization and in-service, • Direct crews as necessary during critical work junctures (final commissioning and through startup), • Perform all electrical testing including but not limited to P&C control equipment, • Demonstrate ability to service newly designed and experimental equipment, which has not been seen after, and instill confidence in the customer, • Develop and maintain strong working relationships with customers, can provide scheduling and meet financial requirements of clients., • Management of resources and services required to install electrical equipment, • Demonstrate safety consciousness in equipment handling, electrical and electronic procedures, and the unique situations encountered at diverse work sites, • Maintain all service equipment including all test equipment, tools issued to meet specifications including ISO requirements, etc. in good working condition and maintain sufficient inventory to respond to standard calls, • Develop and maintain strong working relationships with customers, demonstrates an awareness of customer needs, preferences, and time and financial constraints, • Management of resources and services required to install electrical equipment, • Proven customer service, sales ability, and ability to handle irate or difficult customers and gain satisfaction Education Bachelor’s degree in engineering (electrical, mechanical or engineering technology) is required. BSEE or BSEET from an accredited institution is preferred. Experience 7-10 years with capabilities in below areas is preferred: • In-depth understanding of three-phase power systems, • In-depth understanding of protection and control schemes and implementation, • In-depth experience utilizing relay test sets SEL, GE, Beckwith, ABB, Basler, etc. and various manufacturers of electromechanical relays, • In-depth understanding of equipment testing - circuit breakers, transformers, circuit switchers, MOABS, CTs, PTs, batteries and chargers, transfer switches, line tuners, wave traps, carrier relays, etc., • In-depth experience with PQ measurements, • Experience leading crews to test and commission new and modified substations, • Experience with rotating machinery, including generators and excitation systems, • Experience testing previously programmed RTUs locally and remotely to system operators, • Experience with SCADA, RTU, and DFR systems, • Experience with AutoCAD is also desired, • Ability to travel up to 25% Working Conditions On site environment could require work in various temperature conditions; in and/or around moisture, on slippery and/or uneven surfaces, in confined spaces, and at heights; will require frequent standing, driving a 4-wheel drive vehicle, and occasional bending, squatting, climbing, twisting, balancing, and reaching; will have exposure to noise, vibrations and chemicals. May require irregular or extended hours, subject to being on call and travel for project completion. *Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance. Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance Salary Range The expected salary range is $140,000 - $170,000 annually depending on qualifications plus a discretionary bonus and employee stock program. #LI-WM1 #LI-HYBRID

Job Description Kingspan Insulated Panels North America, a division of the Kingspan Group plc headquartered in Ireland, is a global and trusted leader in the design, manufacturing, and supply of high-performance sustainable building products and solutions for the construction industry. As the most energy-efficient, cost-effective building envelope solutions, insulated metal panels are at the forefront of sustainability. We serve the architectural, commercial/industrial, cold storage and food processing markets, and are committed to delivering the most advanced building products on the market. Learn about our Planet Passionate initiatives: At Kingspan, our future success is based on the quality of our people, who's expertise and motivation have helped ensure that we remain at the forefront of the construction materials manufacturing industry. In joining Kingspan you become an important part of a growing organization with a reputation for innovative design and use of technology, technical expertise, product quality, service excellence, and dedication to sustainability. Ready to be part of our team? Salary range $85,000- $95,000 Quarterly Performance Bonus Career Advancement Opportunities Paid holidays and PTO. We are looking for a Plant Engineer for our Modesto, CA Plant! Summary: We are looking for an experienced Plant Engineer to lead projects to implement new products, processes, and materials into the production phase to improve cost competitiveness and customer satisfaction. The successful candidate will be able to improve industrial processes in order to maintain efficiency, reduce costs, improve sustainability, and maximize profitability. Essential Duties: • Analyzes & Improves manufacturing process flows continually for the enhancements of quality, cost reduction, and throughput., • Confers with planning and design staff concerning product design and tooling to ensure efficient production methods., • Analyzes and plans workforce utilization, space requirements, workflow, and designs the layout of equipment and workspace for maximum efficiency., • Creates, understands, and interprets engineering drawings, process specifications, and design intents. Understands and interprets 3D models. Understands and interprets geometric tolerance, design intent, and primary design features., • Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards., • Develops mechanical design and drafting of products, production jigs, and machinery., • Performs cost studies to determine the lowest cost of manufacturing and coordinates the implementation of these changes., • Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes., • Applies statistical methods to estimate future manufacturing requirements and potential., • Provides engineering support in the production department to troubleshoot and resolve technical problems., • Develop best practices, routines, and innovative solutions to improve production rates and quality of output., • Supports company policies and procedures, goals and objectives, and goods manufacturing practices., • Develops, configures, and optimizes industrial processes from inception through to start-up and certification., • Perform process simulations., • Perform risk assessments., • Provide process documentation and operating instructions., • Follow the Group Code of Conduct and Group Compliance., • Follow Compliance requirements per “KNA-SOP-1705 Compliance Roles and Responsibilities.”, • Performs all other duties as assigned. Education/Experience: • Bachelor's degree (B. S.) in Mechanical Engineering from a four-year college or university., • 2-5 years’ experience in a high-paced continuous manufacturing environment. Computer Skills: • Must be highly proficient in all Microsoft Office applications (Word, Excel, PowerPoint) and Outlook., • Proficient in CAD & Solid Works software. Other Skills and Requirements: • Proven working experience in process engineering., • Excellent technical skills., • Knowledge of process-related standards., • Experience in process simulations., • Must be self-motivated and proficient in developing and executing to a project timeline., • Analytical thinker with interpersonal skills., • Good to excellent communication skills (written and oral)., • Excellent telephone and oral communication skills., • Ability to maintain a high level of confidentiality., • Must have the desire to strive for continuous improvement and excellence within a fast-paced growth environment., • Previous Lean manufacturing experience desired. Physical Demands: The physical demands described here represent those required to successfully perform the essential functions of this role. Reasonable accommodations may be made to enable individuals with disabilities to perform key responsibilities. • Strength Requirements: Ability to exert up to 20 lbs. of force occasionally, up to 10 lbs. frequently, and a negligible amount constantly to lift, carry, push, pull, or otherwise move objects. Tasks may involve extended periods of sitting, with occasional walking or standing., • Dexterity & Coordination: Requires fine motor skills for handling tools, operating computers, and performing precise engineering tasks. The ability to reach, grasp, and manipulate small objects is essential., • Visual Requirements: Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus for technical drawings, documentation, and field inspections., • Environmental Exposure: May involve limited fieldwork, exposure to varied temperatures, noise, dust, or outdoor conditions, depending on project needs., • Cognitive & Communication Demands: Requires sustained mental focus, problem-solving, and analytical skills, along with effective verbal and written communication when collaborating with teams or presenting findings. We offer a comprehensive benefits package including 401k with company match, Medical, Dental, Vision, Identity Theft Protection, Critical Illness, Accident, Hospital Indemnity, Pregnancy and Parental Leave, Fitness Reimbursement, Educational Assistance, Life, AD&D, Short- and Long-Term Disability, and Life Assistance Program. Kingspan is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to any factor, including veteran status and disability status, protected by applicable federal, state or local laws.

Job Description JOB STATEMENT: A Bottling Line Maintenance Mechanic, Level III will possess expert knowledge of bottling line equipment operations, processes, safety, and repair. The Mechanic will have advanced electrical and mechanical diagnosing and troubleshooting skills and be a critical member of the team responsible for supporting a safe and efficient operation that routinely achieves Operational Equipment Effectiveness (OEE) targets. The position requires the ability to work any shift as directed by Management. Must be able to work and communicate with all Supervisors, Machine Attendants, Machine Operators, Cellar Operators, Forklift Operators, and Managers, to ensure the team meets production schedules for the bottling lines. ESSENTIAL DUTIES: • Understand and comply with all ISO 9001, HACCP and GMP requirements and processes, • Has a strong command of all bottling line machinery and controls, • Must have advanced mechanical and electrical troubleshooting skills, • Must be able to plug into a PLC to effectively troubleshoot, correct, and modify ladder logic programs as needed to keep production running. Has the ability and interest to support full PLC program writing and testing. • Ability to wire and rewire control panels for line equipment., • Must have advanced knowledge of VFD’s and PLC controls, • Must have advanced mechanical / electrical troubleshooting skills and understand a machine’s cycle of operation. • Knowledge of basic industrial electricity, 110v, 220v, and 480v, three phase power, resistance and amperage. • Knowledge in HVAC systems, boilers, chillers, air compressors and dryers, nitrogen generators, etc. and their repair • Communicate to Supervisors, Line Workers, Cellar, Quality Assurance (QA), Senior Management, and Co-workers • Safely trouble-shoot and repair equipment and utilize the Lock-Out, Tag-Out (LOTO) protocol, • Read and understand equipment manuals, drawings, electrical drawings and P&IDs, • Report all parts used and needed for reordering to Parts Room staff, • Work effectively and remain calm in all situations, • Must be able to work independently, at times., • Perform necessary change-over of the bottling line machinery and equipment in a timely manner • Proper and safe use of a V.O.M. (Volt. OHM. Meter), • Performs corrective, preventative, and routine maintenance on equipment and facility to keep them in top working condition. Supports planned overhaul work. • Has basic engineering knowledge and can effectively work with company engineers and external technical and engineering staff to solve problems and design solutions. • Must supply own hand tools and be able to carry a tool pouch weighing approximately 10 to 15 pounds. • Must be able to wear company supplied uniforms, • Must maintain the maintenance turnover logbook, • Responsible for start-up after a changeover and getting lines back to rated OEE within target time limits. • Basic welding skills (TIG, stick) highly desired. JOB REQUIREMENTS: • Two (2) year certification in automotive, marine, machining/welding, industrial electrical & controls, or aviation maintenance and troubleshooting and at least ten (10) years’ experience with demonstrated increase in responsibility and scope at the title of Senior Mechanic/Mechanic III/Industrial Electrician in a plant manufacturing environment, with preference for high-speed beverage manufacturing of sodas, wine, beer, juice or dairy products with at least 2MM units of production annually. • OR, • At least fourteen (14) years’ experience with demonstrated increase in responsibility and scope at the title of Senior Mechanic/Mechanic III/Industrial Electrician in a plant manufacturing environment, with preference for high-speed beverage manufacturing of sodas, wine, beer, juice or dairy products with at least 3MM units of production annually. • CPR Certification and first aid mandatory. Knowledge of: • Process equipment cycle of operation, • Practical welding and fabrication techniques – sanitary welding experience a plus, • Preventive maintenance schedules and overhauls, • Equipment manuals, specifications, drawings Ability to: • Plan and schedule assigned duties, • Train, mentor and coach team mates in the Maintenance & Engineering Dept., • Work independently with minimal supervision, • Interact effectively with other workers and supervisors, • Work at various heights and awkward positions PHYSICAL REQUIREMENTS: • Lift up to 50 lbs., • Occasional stair climb, • Frequent walking, • Work in awkward positions (kneeling, lying down or squatting), • Must be able to travel to Ceres 80%, Santa Rosa 10%, and Napa 10% WORK ENVIRONMENT: • Moving machinery, • Occasional high noise level, • Exposure to solvents/chemicals, • Frequently working in outdoor climate PERSONAL PROTECTIVE EQUIPMENT REQUIRED: • Side shield safety glasses, safety vest, head/ear protection and proper footwear when in production facility

Job DescriptionJoin an award-winning, not-for-profit hospital system as a Sterile Processing Technician!Position Summary We are seeking an experienced Sterile Processing Technician to support safe and efficient surgical operations. This role is responsible for the full cycle of sterile processing to ensure surgical instruments and equipment meet all infection control and quality standards. Key Responsibilities • Perform full-cycle sterile processing including decontamination, inspection, assembly, sterilization, storage, and distribution of surgical instruments, • Operate and monitor sterilization equipment and ensure proper documentation of all processes, • Inspect instruments and trays for cleanliness, functionality, and integrity, • Assemble surgical trays according to established guidelines and procedure requirements, • Follow all infection control policies, regulatory standards, and manufacturer instructions, • Maintain accurate records and support overall department workflow and efficiency Required Qualifications • Minimum 2 years of hands-on Sterile Processing experience, • Sterile Processing Technician (SPT) Certification (CRCST or equivalent), • Current BLS certification, • Demonstrated ability to work independently in a fast-paced healthcare environment, • Strong attention to detail and commitment to patient safety Preferred Skills • Experience working in hospital or surgical services environments, • Knowledge of sterilization standards, infection control protocols, and best practices, • Strong communication and teamwork skills Physical Requirements • Ability to stand for extended periods This is a Contract position based out of Modesto, CA. Pay and Benefits The pay range for this position is $25.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionSalary: Factory Technologies, Inc., a Systems Integrator located in Modesto CA., is currently seeking to hire a Sr. Controls Engineer (Ignition Specialist). This position requires development work within an office environment and support at client sites. This is not a remote role and is based in Modesto, CA. Along with the traditional controls engineer technical skills, as a member of the FTI team, you will be most successful with the following non-technical skills/traits: • Communication, communication, communication, • All team members need to strive for excellent communication skills; oral, written and listening., • Discuss task/milestone/project successes, failures, roadblocks with your team., • Let the team know of unexpected changes to the project and/or personal life schedule as soon as you can. Text, phone, email whatever it takes., • Let the team know of unexpected changes to the scope of work., • Provide daily updates on progress. Know your audience and cater your updates accordingly., • Feedback ask for it and provide it respectfully., • Sharing/collaboration share your time, your skills and the information you have gathered over the years. As a senior engineer, you will be expected to support/develop/lead/mentor junior engineers, drafters, shop personnel and new employees., • Focus support others when needed and allow others to focus on their tasks as needed., • Be curious, not judgmental ask questions to get details., • Adaptability/flexibility the controls systems integrator world is fast paced and changes regularly. Team members need to be able to change directions routinely., • Problem solving/critical thinking senior team members are key to solving problems whether they be technical or other., • Repeatability/scalability think about the work youre completing and how it may be reused and/or scaled for the future. Reuse existing work where appropriate., • Self awareness understand where youre at and what your strengths/weaknesses are., • Empathy put yourself in someone elses shoes before judging. All engineers find mistakes in others work. Remember that others will find mistakes in your work too., • Active Listening listen with the intent to understand, not just to react/respond., • Conflict resolution support reducing inevitable tensions both internally and externally., • Resilience some days can be difficult. Some projects can be difficult. Remember that those difficult times are temporary., • Take care of yourself everyone is different and you will be supported to avoid burnout. You need to be your own gatekeeper and communicate issues, goals and needs., • Participate improvements can only be made with participation. Without participation, everything else is just complaining., • Time Management/prioritization senior team members take on a lot of work and can be asked to be in two places at once. Prioritizing can be a daily challenge. Communicate your issues and come to the table with a proposed solution. Sr. Controls Engineers are most successful in this role when they have the following traditional skills: • 3-5 years experience with Ignition development, • Ignition Gold certified (strongly preferred), • Experience in Ignition 7.9 8.3, • Variety of experience i.e. PLC experience (primarily Allen Bradley), SQL databases, Python, Java, Process automation, Network IT/OT convergence., • BS in Mechanical, Electrical, Mechatronics engineering, Computer Science degree or 10+ years equivalent relevant industry experience, • Expert in PLC/HMI programming and systems integration in industrial applications using various Allen-Bradley, GE and Siemens platforms., • Strong competency in using Rockwell Automation products, WonderWare and Inductive Automation HMI/SCADA software., • Must be able to read and generate P&IDs, flow diagrams and electrical schematics., • Advanced knowledge of networking and communication protocols, such as but not limited to, EtherNet, Asi, Modbus, IO-Link, ControlNet and DeviceNet., • Complete projects within budget, • Have a working knowledge of AutoCAD, AutoCAD Electrical and/or ePlan., • Identify control system components and use a bill of materials to meet project requirements adhering to UL 508A, IEEE and NEC standards., • Support and/or create project cost estimates., • High level knowledge of process instrumentation., • High level knowledge of programming and configuring Variable Frequency Drives (VFDs), • Excellent communication skills; oral, written and listening., • High level knowledge of, or interest in, mechanical systems and manufacturing equipment., • Must be able to work unsupervised and as part of a team as required., • Flexibility when required to work outside of normal business hours as required by clients needs., • General knowledge of Microsoft Office (Word, Excel, Outlook and PowerPoint)., • Must possess a valid drivers license with a clean DMV record. And finally • The successful candidate will receive a competitive salary offer, including medical and dental benefits, 401K with company contributions and vacation/holiday pay., • Work from home opportunities will be available during the core development phase of a project. When not at customer sites or working from home, employees report to our Modesto, CA office.

Job Description Position Overview: The Fire Sprinkler System Designer & Drafter will be responsible for designing, drafting, and coordinating fire sprinkler systems that meet NFPA standards, local codes, and client specifications. This position plays a vital role in ensuring our projects are delivered with technical accuracy, efficiency, and quality. Key Responsibilities: • Develop detailed sprinkler system layout drawings, hydraulic calculations, and material lists., • Prepare and revise CAD or Revit drawings from architectural and structural plans., • Ensure all designs comply with NFPA, state, and local fire protection codes., • Perform hydraulic calculations and assemble submittal packages for review and approval., • Collaborate with engineers, contractors, and project managers throughout the design and installation process., • Provide technical support to field personnel during construction., • Maintain accurate records and produce as-built drawings upon project completion. Qualifications: Required: • 2+ years of experience in fire sprinkler system design and drafting., • Proficiency with AutoCAD (and/or Revit)., • Proficiency with word, excel, outlook and Bluebeam Revu., • Ability to interpret construction drawings and specifications., • Strong attention to detail, organization, and problem-solving skills., • Strong working knowledge of NFPA 13, 14, 20, 24 and 25 standards., • NICET Level I or higher certification in Water-Based Systems Layout., • Experience with SprinkCAD or similar fire protection design software., • Familiarity with BIM coordination and 3D modeling processes.Company DescriptionNexus Engineering is a trusted leader in mechanical, plumbing & fire protection design and consulting, delivering innovative and code-compliant solutions across commercial, residential, and industrial projects throughout California. Our commitment to safety, precision, and client satisfaction drives everything we do.Nexus Engineering is a trusted leader in mechanical, plumbing & fire protection design and consulting, delivering innovative and code-compliant solutions across commercial, residential, and industrial projects throughout California. Our commitment to safety, precision, and client satisfaction drives everything we do.

Job Description Are you looking for the next step in your construction Project Manager / Project Engineer career? Or, are you a mid-career construction management professional looking for the next big opportunity? Have you built significant experience in construction projects and are looking to expand your skill set? Essel is looking for construction Project Managers / Project Engineers with experience managing mid to large scale projects. The Project Manager / Project Engineer could lead multiple projects in the following sectors: • Multi Family, • Ground Ups, • Tentative Improvements, • Colleges / Universities, • K-12 Construction w/ DSA oversight, • Review plans and specs to ensure accuracy, prepare General Conditions, and establish baseline schedules for each subcontractor or self-performing team, • Track project costs and complete project all change management, RFIs, and owner pay applications, • Oversee shop drawings and submittals, write subcontracts and purchase orders for projects, manage subcontractor relationships and conduct regular jobsite coordination meetings, • Minimum 3 - 5 years of experience in K-12 / College / University sectors, • Experience with DSA oversight / managed projects, • Professional Degree in construction management, architecture or a related field (mechanical or civil engineering, construction tech, interior design, business administration) is preferred, • Ability to negotiate, write and execute all subcontract agreements, • Strong communications skills, both written and verbal, • Technology: Proficiency with Microsoft Office, Microsoft Project, Bluebeam and Procore, • Experience with CMAR and/or Design/Build delivery method, • Must work well in a team environment and be committed to client service Industry competitive benefits

Job Description Job Title: Junior Steel Detailer Job Description The Junior Steel Detailer supports structural steel projects by creating detailed 3D models and producing accurate shop and fabrication drawings used by the fabrication shop to build steel components. This position offers close training and mentorship from a Sr. Steel Detailer, with a clear path to increased responsibility and the opportunity to manage multiple projects over time in a friendly, full-service steel fabrication environment. Responsibilities • Build and maintain detailed 3D models for structural steel components and assemblies., • Produce accurate shop and fabrication drawings for beams, columns, plates, and connections., • Read and interpret architectural and structural design drawings and translate them into clear, buildable detailing packages., • Coordinate closely with the main Steel Detailer and the fabrication team to address questions, incorporate redlines, and keep projects moving efficiently., • Apply a high standard of accuracy and professionalism in all detailing work., • Stay organized, manage time effectively, and consistently meet project deadlines., • Start by working on one project at a time while learning company standards and detailing workflows., • Grow into managing up to three projects simultaneously as independence and proficiency increase, while maintaining quality and schedule commitments., • At least 1 year of steel detailing experience in any capacity or industry., • Entry-level to early-career experience with steel detailing gained through work, internship, coursework, or training., • Ability to read and understand design and shop drawings and convert them into accurate detailing packages., • Foundational knowledge of structural steel, drafting, detailing, fabrication, and steel erection concepts., • Strong attention to detail and commitment to producing accurate work., • Willingness to learn new methods, standards, and workflows under the guidance of a Sr. detailer., • Dependable follow-through and reliability in completing assigned tasks., • Exposure to AutoCAD or similar drafting software., • General computer skills, including familiarity with Word and Excel., • Familiarity with structural steel terminology and common industry concepts and standards., • Interest in growing from a junior to a more independent detailer role under mentorship. This role is based in a steel fabrication shop environment, working Monday through Friday from 7:00 AM to 4:00 PM. You will collaborate closely with one Sr.-level steel detailer and interact regularly with the fabrication team. The setting is hands-on and production-oriented, offering direct exposure to how detailed models and shop drawings translate into fabricated steel components. The company operates as a full-service, experienced steel fabrication shop with a strong and stable customer base and a smaller, friendly culture that supports training, mentorship, and professional growth. Job Type & Location This is a Contract position based out of Modesto, CA. Pay and Benefits The pay range for this position is $24.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time. SUMMARY ESS Service Technician do commission work on the ESS according to the processes. Technicians are assigned to a location within the field that modifies and repairs mechanical and electrical processes of the ESS, do the commission work and follows documentation pertaining to their assigned station in their department. JOB DESCRIPTION • Assembles each stage of ESS according to processes., • Provide service and customer support during field visits, • Ability to troubleshoot, test, repair, and service equipment, • Diagnose errors and communicate with customer and team to determine appropriate solution, • Reads schematics., • Uses measuring tape, levels, squares for installations based on Engineering documentation (metric is preferred., • Use of standard hand tools where applicable, • Use of power tools such as electric and pneumatic tools where applicable, • Use of multiple meters., • Drilling and handling of material such as (fiberglass, plastics composites and aluminum), • Installation and removal of fasteners such as nuts, bolts and rivets, • Occasionally apply adhesives and sealants to ESS processes, • Install and repair of cooling system, • Demonstrates attention to detail, • Demonstrates required skills, • Gathers and analyzes information skillfully, • Communicates changes and progress, • Balances team and individual responsibilities, • Adapts to changes in the work environment, • Follows instruction, responds to management direction, • Demonstrates accuracy and thoroughness, • Displays willingness to make decisions, • Upholds organizational values, • Proper use of PPE and observes safety and security procedures of BYD and adhere to customer safety and procedures To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or GED equivalent. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually loud. Regularly required to work outdoors. Occasionally may work in high precarious places. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close, distance, color, peripheral, depth perception, and ability to adjust focus. TRAVEL 100% NOTE: Candidate must live in or near Modesto, CA. DO NOT APPLY IF YOU DO NOT LIVE IN OR NEAR MODESTO, CA. BYD America Corporation/ BYD Motors, Inc./BYD Coach &Bus LLC/BYD Energy LLC is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, national origin, ancestry, sex, gender, gender identity, pregnancy, childbirth or related medical condition, religious creed, physical disability, mental disability, age, medical condition, marital status, veteran status, sexual orientation, genetic information or any other characteristic protected by federal, state or local law. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment.

Core Qualifications - 3+ years of research, academic, or industry experience in Machine Learning, or Data Science, or Software Engineering, or Computer Science, or Statistics, or Biology, or Electrical/Mechanical/Civil Engineering, or Physics, or Chemistry, or Mathematics, or Materials Science, or o

ANSYS Fluent / STAR-CCM+, Siemens Opcenter, SAP S/4HANA) - Design multi-step tasks grounded in your real workflows that require navigating multiple apps, files, and stakeholders in a way that meaningfully challenges frontier AI agents - Collaborate with other automotive engineering experts in your f

Who we're looking for** - BS or MS in Mechanical, Industrial, or Manufacturing Engineering; 3+ years in design, manufacturing engineering, or product development - Expertise in one or more of the following: a CAD system (SolidWorks, Creo, NX, CATIA, Fusion 360), GD&T, a PLM system (Arena, Teamcenter

Description: Crystal Creamery is seeking a Maintenance Supervisor to join our Modesto facility. This role is critical in ensuring the reliability, safety, and efficiency of our plant operations. If you are a hands-on leader with strong technical expertise and a passion for continuous improvement, we want to hear from you. Requirements: Position Summary The Maintenance Supervisor oversees and coordinates all maintenance activities within the plant. This position is responsible for leading a team of maintenance technicians, minimizing downtime, optimizing equipment performance, and ensuring compliance with safety and regulatory standards. Key Responsibilities Leadership & Team Management Lead, mentor, and supervise maintenance technicians. Assign daily tasks, provide training, and conduct performance evaluations. Promote a strong safety culture and accountability within the team. Maintenance Operations Develop and implement preventive maintenance programs. Troubleshoot and oversee repairs to ensure timely resolution. Manage emergency repairs and coordinate with external vendors as needed. Planning & Scheduling Create and manage maintenance schedules to support production goals. Partner with production and engineering teams to minimize operational disruptions. Safety & Compliance Ensure compliance with all safety regulations and company policies. Conduct routine safety audits and inspections. Maintain accurate maintenance and compliance records. Inventory & Budget Management Manage spare parts inventory and maintenance supplies. Monitor and control maintenance-related expenses. Identify cost-saving opportunities without compromising quality or safety. Continuous Improvement Analyze maintenance data and performance metrics. Drive process improvements and implement best practices. Collaboration & Communication Work cross-functionally with production, engineering, and leadership teams. Communicate effectively with internal teams and external partners. Qualifications Bachelors degree in Mechanical Engineering, Industrial Engineering, or related field (preferred). 5+ years of maintenance experience in a manufacturing environment. 2+ years of supervisory experience. Dairy or food manufacturing experience (strongly preferred). Strong knowledge of industrial maintenance practices and equipment. Experience with maintenance management systems (CMMS). Excellent leadership, communication, and problem-solving skills. Physical & Work Requirements Ability to lift and move heavy objects. Comfortable working in a plant environment with noise and varying temperatures. Must be able to work off shift and weekends Crystal Creamery is an Equal Employment opportunity and Affirmative Action Employer. We do not discriminate on the basis of race, traits historically associated with race, including but not limited to, hair texture and protective hairstyles (such as braids, locks, and twists), color, national origin, ancestry, creed, religion, physical disability, mental disability, medical condition as defined by applicable state law (including cancer and predisposing genetic characteristics in California), genetic information, marital status, familial status, sex, gender, gender identity, gender expression, pregnancy, childbirth or related medical conditions, sexual orientation (actual or perceived), transgender status, sex stereotyping, age, military or veteran status, domestic violence or sexual assault victim status, or any other basis protected by applicable law. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Crystal Creamery is committed to providing reasonable accommodations for candidates with disabilities in our recruitment process. How to Apply To apply, please visit our Careers page at crystalcreamery.com. Compensation details: 85000-95000 Yearly Salary PI37a42bb5e355-26289-40422619

Job Description Summary: We are representing a fast-growing construction management firm actively hiring a Project Manager to oversee HVAC-related construction projects across CA. This full-time position is ideal for someone with experience in the mechanical or HVAC industry who is ready to lead field and office coordination across commercial, institutional, and infrastructure projects. The role emphasizes leadership, client communication, and managing project controls from preconstruction through closeout. Key Responsibilities: • Lead HVAC-focused commercial projects from planning to final turnover, • Oversee budgets, schedules, and subcontractor coordination for HVAC scopes, • Serve as the point of contact for clients, engineers, vendors, and field teams, • Support and mentor junior team members and field personnel, • Track project performance and address scope changes and field challenges, • Utilize Procore, Bluebeam, and P6/MS Project for documentation and schedule control, • Manage preconstruction services, estimating, and subcontractor buyout Qualifications: • 4-year degree in Mechanical Engineering, Construction Management, or related field preferred, • 5+ years of project management experience in mechanical or HVAC construction, • Proficient in PM software: Procore, Bluebeam, Microsoft Project, and Excel, • Strong understanding of HVAC systems, ductwork, mechanical equipment, and field installation practices, • Comfortable managing union field crews, subcontractors, and client expectations, • Excellent written and verbal communication skills Compensation + Benefits: • Full-time, exempt role with long-term project pipeline, • Comprehensive medical, dental, and vision coverage, • 401(k) retirement plan with employer contribution, • Paid vacation, holidays, and sick leave, • Career advancement within a growing mechanical construction team, • Opportunities to work on high-profile Bay Area projects

A fast-growing consumer health technology company is seeking a hands-on mechanical engineering leader to oversee development of complex electromechanical products, including a flagship commercial platform and a pipeline of next-generation hardware. Manage teams spanning mechanical engineering, soft

Position: Mechanical Engineering Expert Type: Contract Compensation: $85–$93/hour Location: Remote Commitment: 20 hours/week Role Responsibilities Author technical tasks to evaluate AI model performance on mechanical engineering problems. Qualifications Must-Have PhD in Mechanical Engineering , or

Employee Ownership, Great Team, Excellent Projects This Jobot Job is hosted by: Kellie Hatcher Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume.Salary: $175,000 - $195,000 per year A bit about us: Are you a proven construction leader ready to take on high-

Provide feedback to design engineering team of suspected design related product issues. Bachelor of Science in Electrical Engineering/Bachelor of Science in Computer Science or equivalent experience.

Sandis is a professional services corporation specializing in civil engineering (Land Development Design), traffic engineering, land surveying, and planning, but we are much more than the services we offer. Bachelor's degree in civil engineering, Geomatics or a relatable field.

Cookiy AI is building an AI-native qualitative research platform.Our product conducts voice-based AI interviews at scale and turns conversations into structured research insights for product, growth, and healthcare/life-science teams.We are rebuilding a small, high-ownership remote team and are look

Location: Death Valley, California.Stovepipe Wells in Death Valley National Park - Journey Beyond the Ordinary.Stovepipe Wells has an 80-room hotel, restaurant, bar, pool, gas station, general store, and gift shop.Stovepipe is a welcoming, safe, and environmentally responsible resort providing accom

BKF is a multi-service infrastructure consulting firm providing civil engineering and surveying services across California, the Pacific Northwest, and beyond.

BKF is a multi-service infrastructure consulting firm providing civil engineering and surveying services across California, the Pacific Northwest, and beyond. Bachelor’s degree in Surveying and Mapping, Civil Engineering, or a related field from an ABET-accredited program, plus appropriate continu

Ensure project schedules are fully aligned with scope, procurement, engineering, and construction plans. Collaborate with cross-functional teams including engineering, procurement, construction, and project management to ensure alignment and successful project delivery. Bachelor’s degree in Engine

PALECEK values integrity, loyalty, and strong partnerships as a family-owned company.We are driven to improve, innovate, and inspire.We bring our personal best to every aspect of our business, from our design and craft to our internal teamwork and customer service.We are passionate about creativity

Are you ready to become an expert in Project Management? This is the role for you!.MIGSO-PCUBED is looking for a passionate and communicative IT Project Management Consultant to join our team and support our engagements in San Francisco.This position is onsite and will require you to commute to our

Degree in Engineering, Construction Management, or related field (PE license a plus).

Senior Project Manager / Estimator – Heavy Civil Construction.We’re partnering with a well-established construction company seeking a.Senior Project Manager / Estimator.If you take pride in running tight projects, delivering quality work, and being the person others rely on to get it done right,

Bachelor’s degree in Construction Management, Engineering, or related field preferred.

Job Title: Project Manager, Retail Operations + Technology.Location: Burlingame, CA; Menlo Park, CA; Los Angeles, CA (Hybrid, 3 days/week on-site).The Retail team is responsible for launching and managing the groundbreaking Client Lab stores, creating immersive experiences that bring our products to

Bachelor's degree in Civil Engineering, Construction Management, or related field (or equivalent experience).

MS/PhD in Materials Science,, Applied Physics (materials, laser or optics focus), or Engineering with a minimum of 3+ years of relevant experience. The role provides the opportunity to work with teams of mechanical, electrical, automation, optical, software, and system engineers to improve and bring

You will partner with product, engineering, design, and GTM to turn priorities into shipped outcomes, without adding bureaucracy. Run cross functional launches: product, engineering, design, support, and GTM readiness. Comfortable working with technical teams and understanding engineering constraint

Under limited to no supervision, the Maintenance Technicians (all all levels) perform the installation, PM, PdM, mechanical/electrical repair and troubleshooting of all plant and facility equipment, following all plant safety standards, in addition to advocating for a safe work environment. Performs

They deliver turnkey solutions—from site design and engineering to installation, commissioning, and ongoing maintenance—to support the rapidly growing EV ecosystem.

My client is searching for a Project Manager/ Estimator with a great understanding of the Drywall industry.The Project Manager/ Estimator will be responsible for conducting multiple tasks in unison, including overlooking cooperative team communication, calculating software methods, as well as comply

A bachelor's degree in Project Management, Business Administration, Engineering, or a related field is preferred.

A top-performing, billion-dollar general contractor and key partner of Foster Lawson are seeking an experienced Project Manager to join their team in the San Francisco Bay Area.This would be a great opportunity to play a key role in delivering large-scale construction projects.Offering a strong comp

Assistant Project Manager, Real Estate Development.Orange County, CA | Full-Time | On-Site (Initial).A rapidly growing real estate development firm is seeking an Assistant Project Manager to support the execution of large-scale multifamily and affordable housing projects across Southern California.T

The ideal candidate will be responsible for planning, coordinating, and implementing projects within the decided-upon budget, timeline, and scope.They will also effectively monitor and present project updates to relevant stakeholders, clients, or project team members.Update relevant stakeholders or

By nurturing a culture where everyone experiences a deep sense of belonging and equity of opportunity, we will uphold our vision to “unleash human and business potential.We commit to being an anti-ism workplace and embedding diversity, equity, and inclusion throughout our business.Project Manager

We are distillery; a global independent creative practice, trusted by world-leading B2B, purpose and consumer organisations to deliver tangible value through our marketing specialisms.Our purpose is to empower ambitious business leaders and marketers to make a difference.We achieve this through comp