Trabajos mechanical engineering en San Antonio, TexasCrear alertas

Job Description About Us BRC is a recognized leader in accident reconstruction and injury causation consulting, known for technical excellence and contributions to peer‐reviewed research. Role Overview We are seeking a skilled Manager to lead our Legal Case Services team. This role provides day‐to‐day oversight of Case Coordinators, ensuring operational consistency, workload balance, and high‐quality execution. Key Responsibilities · Lead, coach, and develop Case Coordinators. · Oversee daily workflows to ensure accuracy, timeliness, and consistency. · Balance caseloads and support consultant readiness. · Serve as escalation point for workflow or scheduling challenges. · Define and track KPIs to monitor accuracy, turnaround times, and workload balance. · Use data to identify performance gaps and drive improvements. · Implement quality checks for calendaring, documentation, and deadline compliance. · Reinforce adherence to policies and confidentiality standards. · Partner with Senior Case Coordinators on training and staff development. · Communicate effectively with leadership and cross‐functional teams. · Translate strategy into scalable workflows and measurable results. · Support technology adoption and process optimization. · Collaborate with leadership and HR on staffing and performance management. Required Education and Experience · 5+ years managing operational teams in high‐volume, deadline‐driven legal or professional services environments. · 5+ years improving, stabilizing, and standardizing operations. · 3+ years leveraging technology and data to manage performance and KPIs. · Associate or Bachelor’s degree in business administration, management, paralegal studies, or a related field (preferred, not required). Company DescriptionBiodynamic Research Corporation (BRC) is a professional services firm specializing in biomechanical analysis and accident reconstruction. BRC is located in San Antonio, Texas and serves clients throughout the United States, Puerto Rico, Canada, and Mexico. BRC was founded in 1986 by Dr. James V. (Jim) Benedict, a physician with a PhD in Mechanical Engineering. The focus of BRC at that time was to retrospectively analyze automotive collisions, determine the application of the collision’s forces to the vehicle occupants, and determine the injury consequences. Over the years, BRC has applied this type of analysis to numerous traumatic incidents including, but not limited to, both high and low velocity passenger vehicle collisions, slip and fall events, and injury events involving aircraft, bicycles, motorcycles, ATVs, boats, elevators, forklifts, tractor-trailers, trains, amusement park rides, power tools and light industrial equipment. Today, BRC has more than 60 full-time and part-time personnel performing or supporting a myriad of professional service activities related to biomechanics and accident reconstruction. These include physicians, most of whom also have engineering degrees, or who have a PhD in engineering, technicians with degrees in engineering, Nurse Analysts, Paralegals, Visual Communications professionals and a Research Librarian, as well as various administrative support professionals. BRC's experts are oftentimes designated and asked to provide expert analysis and testimony during litigation proceedings. Over the past 25+ years, in addition to numerous depositions, BRC’s experts have testified in more than 1000 trials throughout the United States as well as in Puerto Rico, and several Canadian provinces. BRC has also conducted extensive internally funded research related to biomechanics and accident reconstruction. This research has been published in a variety of peer-reviewed technical journals.Biodynamic Research Corporation (BRC) is a professional services firm specializing in biomechanical analysis and accident reconstruction. BRC is located in San Antonio, Texas and serves clients throughout the United States, Puerto Rico, Canada, and Mexico.\r\n\r\nBRC was founded in 1986 by Dr. James V. (Jim) Benedict, a physician with a PhD in Mechanical Engineering. The focus of BRC at that time was to retrospectively analyze automotive collisions, determine the application of the collision’s forces to the vehicle occupants, and determine the injury consequences. Over the years, BRC has applied this type of analysis to numerous traumatic incidents including, but not limited to, both high and low velocity passenger vehicle collisions, slip and fall events, and injury events involving aircraft, bicycles, motorcycles, ATVs, boats, elevators, forklifts, tractor-trailers, trains, amusement park rides, power tools and light industrial equipment.\r\n\r\nToday, BRC has more than 60 full-time and part-time personnel performing or supporting a myriad of professional service activities related to biomechanics and accident reconstruction. These include physicians, most of whom also have engineering degrees, or who have a PhD in engineering, technicians with degrees in engineering, Nurse Analysts, Paralegals, Visual Communications professionals and a Research Librarian, as well as various administrative support professionals.\r\n\r\nBRC's experts are oftentimes designated and asked to provide expert analysis and testimony during litigation proceedings. Over the past 25+ years, in addition to numerous depositions, BRC’s experts have testified in more than 1000 trials throughout the United States as well as in Puerto Rico, and several Canadian provinces.\r\n\r\nBRC has also conducted extensive internally funded research related to biomechanics and accident reconstruction. This research has been published in a variety of peer-reviewed technical journals.

Overview: CoolSys solves the most complex challenges in refrigeration, air conditioning, heating, engineering, and energy management. With over 3,700 associates nationwide, we deliver tailored solutions to help businesses cut costs, improve equipment performance, and reduce emissions. Our services include HVAC and refrigeration equipment sourcing, installation, repair, maintenance, monitoring, and optimization. We also offer engineering design, energy resilience and consumption optimization, asset recycling, and seamless multi-site rollouts across states. Based in Southern California since 2007, CoolSys serves over 45,000 customer locations in industries like retail, food service, commercial, data centers, industrial, and pharmaceuticals. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: • Competitive pay, • Medical, Dental, Vision and Prescription coverage, • Paid vacation and holidays, • 401(K) match, • Life insurance, AD&D and long-term disability, • Tuition reimbursement, • Opportunities available nationwide, • Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more, • Pet Insurance To support our rapid growth, CoolSys Energy Design - Consulting Engineers (CED) is in search of a full-time, Project Manager to join our team in San Antonio, TX. Our ideal candidate will have demonstrated multi-disciplinary supermarket project management expertise, excellent organization, time management, and prioritization skills. Responsibilities: • Work directly with company management to oversee and manage complex, multi-disciplinary project teams, • Review deliverable deadlines and assign duties to staff to maintain project schedule and efficacy in coordination with department supervisors, • Provide resource and utilization planning input across multiple technical departments closely interfacing with department heads and senior staff, • Coordinate with engineers, architects, contractors, and clients to collect and organize project-related material and drive success during different stages of project planning and design, • Manage the Construction Administration process including collecting and responding to RFIs as well as managing the submittal review process, • Coordinate with local building officials regarding code compliance, • Perform on-site visits and reporting as required, • Maintain general knowledge of all engineering functions including Mechanical, Electrical, Plumbing, Refrigeration, Controls, and Fire Protection design in order to effectively manage engineering projects and speak to our clients regarding project details and program initiatives, • Manage major engineering projects including management of project teams, deadlines, technical scope clarifications, etc., • Bachelor of Science degree in Architecture or Engineer. Other fields are considered based on experience and skill set., • 5+ years of directly relevant professional experience, • Highly organized and detail-oriented with a passion for ensuring projects proceed efficiently and effectively, • Strong problem-solving and decision-making capabilities as well as demonstrated high-quality technical writing skills in English, • Team player with sound business ethics and the ability to multi-task in a fast-paced environment, • Experience with Autodesk products including AutoCAD, Revit, BIM360, and Autodesk Construction Cloud is required, • Experience with construction project management tools (e.g. Procore, Projectmates, etc.) is preferred, • Excellent oral, written (including proofreading, spelling, and grammar), interpersonal skills, and teamwork principles to effectively communicate at all levels, • Ability to achieve project goals and deadlines with minimal supervision, • Willingness to work with all levels of internal staff, as well as outside clients and vendors to develop a full understanding of building energy systems and their operation, • High proficiency in Microsoft Office applications (Word, PowerPoint, Outlook, and Excel). This position will require travel to project sites on an as needed basis. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

HVAC TB Sr Controls Tech II Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer * Competitive salary * Paid vacation/holidays/sick time- 10 days of vacation first year * Comprehensive benefits package including 401K, medical, dental, and vision care – Available day one * Encouraging and collaborative team environment * Dedication to safety through our Zero Harm policy * Check us out!: ___ What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it * Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. * Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. * Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. * Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. * Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. * Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. * Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. * Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. * Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. * Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. * Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. * Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. * Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. * Compiles and/or completes project as built and close-out documentation. * Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. * Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. * Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. * May provide field change information to the project team for the creation of as-built drawings and software. * Keeps management and JCI contractor or customer informed of job progress and issues. * Assists in performing site-specific training for owner / operator on the total building control system. * Participates in release meeting with project field team. * Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. * Provide quotes to support recommendations and solutions. What we look for Required * Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. * Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. * Vocational School program graduate or an associate's degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems. * Demonstrated ability to install and/or service electronic control systems and HVAC equipment. * Effective communication skills to represent Johnson Controls on customer sites. * Possesses the ability to explain technical information to technical and non-technical people. * Demonstrate effective writing skills as well as understanding of programs and software applications. * Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. What else you’ll get Supportive team environment, flexible schedule, mobile device, laptop, company vehicle when appropriate. Add to that a competitive salary, best in class benefits package that starts on day 1, which includes medical, dental & vision, 401(k), tuition reimbursement, paid time off and career growth opportunities. HIRING HOURLY RANGE: $28.70 - $39.47 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at___

Come make an impact in the Public Sector! Join our team to do meaningful work and support high-impact government missions. GP Strategies Government Solutions, Inc. Government Training Solutions | GP Strategies, a wholly owned subsidiary of GP Strategies Corporation, focuses on helping every public sector team unlock its full potential through people performance solutions. Our work directly supports mission critical government agencies, including: • Air Force, • Army, • Department of Defense (DoD), • Department of Health & Human Services (HHS), • Department of Homeland Security, • NASA, • National Highway Institute (NHI) | Federal Highway Administration (FHWA), • State & Local Governments Our Mission is meaningful and powerful: to deliver innovative people performance through off the shelf and custom learning, mission specialists, and technology solutions, building deep partnerships with customers to help them achieve measurable mission and company performance improvements. GP Strategies Corporation, the corporate parent of GP Strategies Government Solutions, is a global leader in talent transformation, dedicated to empowering organizations to unlock their full potential. We help businesses enhance workforce performance and achieve strategic goals through innovative, technology-enabled learning solutions. For over 50 years, with a proven track record of supporting over 6,000 global organizations worldwide, we combine human expertise with AI-driven insights to deliver customized strategies that upskill talent, drive technology adoption, and optimize critical processes. GP Strategies has an opening for an Aviation Instructor to support a large aerospace client in San Antonio, TX. We are seeking candidates who are able to conduct training covering a broad range of Aircraft electrical, mechanical, structural and systems subject matter including, but not limited to, shield terminations, crimping, bond & ground, soldering, seal, hole drilling, fastener installation/removal, and more. This is a full-time, benefitted position and will involve 50% travel Internationally and throughout the U.S. Background/Experience with heavy aircraft is required. Job Summary: • Confers with management/client to understand work situation. Performs needs, job and task analysis to determine training required for trainees to better understand changes in policies, procedures, regulations and technologies., • Recommends an implementation plan for development of instructional methods and delivery of individual training, group instruction, lectures, demonstrations, conferences, meetings and workshops., • Designs and develops teaching outlines and specific training to address the client needs by incorporating methods and requirements of instructional systems such as Instructional Systems Development (ISD), Systematic Approach to Training (SAT) or Training Systems Development (TSD) process., • Selects or develops teaching aids such as training handbooks, demonstration models, multimedia visual aids, computer tutorials and reference works., • Delivers training sessions covering specified areas of technical specialty., • Designs and develops exams to measure progress and to evaluate effectiveness of recommended training., • Evaluates training programs and reports on trainee progress., • Maintains training programs and materials., • Travels to client sites as needed., • This role may require work on multiple shifts. Qualifications: • 2-5 years education, training and/or prior experience in electrical, mechanical, or structures systems, • 2-5 years prior teaching/instructor classroom delivery experience, • Ability to travel up to 50% to various client locations throughout the U.S and Internationally, • Background/Experience in one or more of the noted platforms: C-17, 747 or KC46 Desired Skills: • Engineering Drawings/Interpretation Experience (B/P, Drawings, Specifications, Repair Manuals), • NACES School Ejection Seat Experience, • Flight Controls – Rigging, • Engineering - Time Compliance Technical Orders (TCTO), • Flight Controls/Avionics (APU, avionics, breaks, propulsions/engine runs, hydraulics, jacking, landing gear, and doors), • Background/Experience in one or more of the noted platforms: F-18, F-15, or F-22 PHYSICAL REQUIREMENTS General physical requirements needed to perform the essential functions of this job may vary based on location of assignment. Assignment Location – San Antonio, TX • Sedentary Work – Exerting up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body., • Fingering (typing), communicating, repetitive motions., • Close visual acuity to prepare and analyze data, view computer monitors and read. May need to view presentation screens and other visual aids in a virtual setting., • Inside environmental conditions with protection from outside elements. At GP Strategies Government Solutions culture focuses on performance and revolves around respect, fairness, and working collaboratively to achieve our goals. We support our People, no matter who they are or where they are from, because we all have valuable and unique perspectives and approaches. That's how great ideas are born, which enable us to work smarter. GP Strategies Government Solutions is committed and proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth and related conditions, sexual orientation, and gender identity), national origin, age, veteran status, disability, or any other federally protected class. GP Government Solutions is a subsidiary of GP Strategies Corporation, a global workforce-transformation company with over 50 plus years of experience. To find out more, please visit us as

Global Construction & Industrial Services Firm Position Overview We are seeking a driven, relationship‑oriented Outside Sales Representative to expand our presence in the San Antonio market. This role focuses on identifying bid opportunities, building strong customer partnerships, and delivering tailored access and construction solutions across a diverse portfolio of projects. Business Development & Relationship Management • Proactively prospect within the assigned territory to identify and pursue new bid opportunities., • Build and maintain strong relationships with general contractors, subcontractors, developers, mechanical contractors, manufacturing facilities, architects, and government agencies to generate ongoing opportunities., • Utilize Salesforce to identify, track, and manage all sales activity, opportunities, and bid documentation., • Partner with sales managers and construction managers to develop complete quote packages, • Coordinate with the prequalification team to register the company with new customers and secure placement on bidder lists for upcoming projects., • Evaluate bid opportunities for potential upsell across the full range of access solutions Qualifications Required • Experience in scaffold and work‑access sales, particularly involving labor‑based contracts., • Demonstrated success in cost estimating scaffold or work‑access projects., • Hands‑on experience with Salesforce in a construction‑based configuration., • Background in engineering, drafting, or construction estimating., • Bachelor’s degree in Business, Civil Engineering, Sales, Marketing, Construction Management, or a related discipline. What’s in it for you: • Competitive base salary + commission, • Company vehicle or vehicle allowance for field travel, • Comprehensive benefits (medical, dental, vision, life, disability)

About the Role We’re looking for a skilled Technical Writer to join our innovative team, where your passion for writing meets your technical expertise. In this role, you’ll create clear, precise documentation that guides the installation, operation, and maintenance of advanced electronic and mechanical equipment. Collaborating with experts, you’ll contribute to projects that directly support aviation and aerospace safety and efficiency. What You’ll Do • Develop accurate technical manuals, user guides, and documentation that meet customer specifications., • Translate specifications, notes, and drawings into clear, concise written materials., • Work closely with editors and production teams to meet deadlines and graphic requirements., • Utilize XML, SGML, HTML, and other tools to create and maintain documentation., • Consult with customers to understand and fulfill their documentation needs., • Provide technical writing expertise to internal teams across departments., • Conduct risk analysis on flight and safety-critical components, reporting concerns in line with Just Culture policies., • Support special projects while maintaining safety and quality standards. What We’re Looking For • Strong research, writing, and grammatical skills with attention to detail., • Excellent organizational, analytical, and oral communication abilities., • Hands-on experience with aircraft or aero engine maintenance., • Ability to read and interpret technical drawings and blueprints., • Proficiency with PC systems in current operating environments., • Relevant college degree or equivalent in mechanical or electrical engineering technology., • Demonstrated technical writing experience with a portfolio of work., • 1–3 years of related work experience. What We Offer • A challenging role that strengthens your technical communication skills., • The chance to work on meaningful projects that impact aviation safety., • A collaborative and engaging work environment that values your contributions., • Opportunities for growth and advancement within the aviation and aerospace sectors. Why Apply Through Total Aviation Staffing? At Total Aviation Staffing, we connect aviation professionals with top-tier opportunities, including: • Commercial Aviation – airlines, cargo, aircraft leasing, • Business & General Aviation – corporate jets, charter, private aviation, • MRO & Aftermarket Services – maintenance, repair, overhaul, parts distribution, • Aerospace & Defense – military, space, and defense programs, • Aviation Technology & Manufacturing – OEMs, avionics, propulsion, emerging tech Even if this role isn’t your perfect fit, applying gives you access to multiple opportunities that may not be publicly advertised. You’ll also benefit from: • Priority access to multiple job openings, • Expert career guidance from specialized aviation recruiters, • Connections with top companies in aviation and aerospace Take the next step in your aviation career—apply today!

Optomi, in partnership with a leading logistics company is seeking a Senior Full Stack Java Developer (Java / Kafka / Spring Boot / AWS) to support and modernize critical systems within the Mechanical organization. This team maintains locomotives, railcars, and detector systems that capture millions of operational and safety data points across the network. About the Position: The role focuses on refactoring legacy microservices, scaling event-driven architectures, re-platforming rules engines, and building cloud-native, resilient, high-volume IoT data pipelines. This is a high-impact engineering role where your work directly influences safety, reliability, and operational efficiency across one of the largest transport networks in the US. Apply Today if your Background Includes: • 6+ years of Full Stack experience with a backend emphasis in Java Spring Boot development., • Strong event-driven architecture + Kafka experience, • Proven experience modernizing legacy microservices & distributed systems, • AWS Cloud experience, • Hands-on Python experience for backend/data workflows, • DevSecOps mindset: automated testing, CI/CD, secure coding, • Experience supporting both greenfield and legacy systems, • Strong relational DB experience (Postgres preferred), • Experience handling IoT or high-volume sensor data pipelines, • Familiarity with open-source tooling and cloud-agnostic architectures, • Ability to mentor junior engineers and provide technical leadership What the Right Professional Will Enjoy! • Fully remote work opportunity with up to 20% travel., • Opportunity to work with a fast-growing team focused on modernization, cloud adoption, and automation., • Direct impact on safety, rail operations, and national freight logistics., • Work on high-volume IoT, event-driven architectures, cloud-native systems., • Exposure to AI/GenAI, automation, and open-source tooling, • Leadership opportunities with junior developers Responsibilities: • Modernize legacy microservices and distributed systems supporting mechanical operations and detector networks., • Design and implement backend services using Java, Spring Boot, event-driven patterns, and Kafka., • Scale and optimize high-volume IoT data pipelines (30M+ incoming data points from sensors/detectors)., • Lead architecture, design, and deployment efforts for new and existing services., • Refactor and support large rules-engine frameworks (600+ rulesets)., • Contribute to cloud-native development (AWS preferred; Azure acceptable; cloud agnostic mindset encouraged)., • Use Python for backend workflows, automation, and data processing tasks., • Build automated CI/CD and testing frameworks following DevSecOps best practices., • Work with Postgres and relational databases to tune, model, and integrate data., • Mentor junior developers and support a strong engineering culture focused on speed, clarity, and automation., • Collaborate across teams to build scalable, modern systems., • Support both new development and the existing application footprint.

We put the unity in "opportunity." Opportunity Snapshot: • Compensation: $50/hour, • Location: Spring, TX, • Duration: 12 months+, • Work Schedule: 14/14 rotation - 12-hour shift - alternating days/nights, • Benefits: Comprehensive insurance, 401(k) program, PTO & Holidays and Company vehicle Qualifications: • Minimum 2-5 years of experience in gas compression, oil & gas operations, or industrial maintenance, • Familiarity with rotating equipment, instrumentation, and process controls, • Technical or vocational training preferred, • Certifications such as OSHA 10/30, H2S Awareness, First Aid/CPR, or DOT Operator Qualification (OQ) are a plus, • Strong mechanical aptitude and troubleshooting skills, • Ability to read P&IDs, schematics, and technical manuals, • Knowledge of HMI systems and control room operations is a plus, • Good verbal and written communication skills, • Rotating shift work, weekends, and holidays as needed, • Ability to work in varying weather conditions and remote locations, • Frequent lifting (up to 50 lbs.), climbing, bending, and standing for extended periods, • Ability to wear personal protective equipment (PPE) as require, • High School diploma or GED required Responsibilities: • Compressor Operator for Vapor Recovery Unit to oversee the safe and efficient operation of natural gas compression equipment, • Operate and monitor natural gas compressors, dehydration units, and associated equipment, • Adjust operating parameters to maintain optimal pressure, flow, and efficiency, • Conduct routine inspections and record equipment readings to detect irregularities, • Perform minor maintenance and assist with repairs on compressors, engines, and auxiliary systems, • Identify mechanical or process issues and escalate as necessary to maintenance personnel, • Assist in troubleshooting electrical, pneumatic, and hydraulic control systems, • Follow all company safety policies, • Maintain accurate logs of operating data, maintenance activities, and safety checks, • Report any equipment malfunctions, safety concerns, or operational deviations, • Utilize digital tools and systems for data entry and reporting The Bergaila Way: The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice. Client Overview: Our Client is a global international energy exploration and production company and one of the largest oil producers in the United States. Founded in 1920, our client’s technical expertise and proven ability to deliver lasting results are the hallmark of their international success. While manufacturing the building blocks for life-enhancing products, our client utilizes leading edge technologies that grow their business and simultaneously help to advance a lower-carbon world.

Bachelor’s Degree in Electrical Engineering (preferred), Mechanical Engineering or other degree in Science, Technology, Engineering and Math. Candidate will collaborate with electrical, mechanical, components, manufacturing, and other engineering disciplines to support the design of weapon systems

At Airco Mechanical, we’ve been a leader in commercial HVAC, Electrical, and Plumbing installation and service for over 40 years. With locations in Round Rock and San Antonio, our company continues to grow thanks to a talented team and a commitment to excellence. We provide competitive pay, strong benefits, and clear paths to advancement so our employees can build long-term careers. If you’re ready to work with a company that values its people and rewards performance, we’d love to meet you. Why Work at Airco Mechanical? • Competitive pay with opportunities to increase your income, • Excellent benefits package, • Stable company with 40+ years in business, • Opportunities for advancement and internal promotion, • Work/life balance The successful candidate will need to be successful with the following responsibilities: • Manage medium to large commercial HVAC projects, • Maintain and document communication with clients and company staff, • Ability to manage multiple projects in varies states of construction, • Working knowledge of construction cost, change order processes and forecast “Cost to Complete” reviews, • Work closely with labor managers, • Comprehend and manage general contractor scheduling of projects, • Train and mentor assistant project managers, • Knowledge of construction contracts Requirements: • 3+ years of commercial HVAC project management experience, • A degree in mechanical engineering or construction science is a plus, • Strong computer skills in Microsoft Office; Bluebeam & Navis experience are a plus, • Must possess a valid unrestricted Driver's License and a reliable vehicle

Well established MEP design firm seeking an experienced Senior Electrical Engineer to join our talented team! This Jobot Job is hosted by: Josh Rabinowitz Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $135,000 - $180,000 per year A bit about us: We are a multidisciplinary MEP (Mechanical, Electrical, Plumbing) engineering firm delivering innovative, sustainable, and cost-effective design solutions across a wide range of projects, including commercial, residential, healthcare, education, and government facilities. Our team is dedicated to technical excellence, client satisfaction, and collaboration. If you're an experienced Senior Electrical Engineer and this sounds like the opportunity for you please read on! Why join us? Comprehensive benefits package, including health insurance, retirement plans, and paid time off. Opportunities for professional growth and continuing education. Collaborative work environment with a focus on innovation and quality. We are committed to fostering professional development and career advancement by promoting accelerated growth opportunities from within our organization. Job Details Bachelor’s Degree from an accredited institution Licensed Professional Engineer (P.E.) 10+ years of electrical design experience 7+ years of direct MEP design experience 3+ years of project management experience overseeing design and implementation 3+ years of supervisory experience leading and mentoring an MEP design team We can offer you the opportunity to work on State-of-the-Art technologies with a tremendous amount of opportunity to grow from within our organization. So if this sounds like the opportunity for you please apply today! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Director, Facilities Management - University Health Retama Hospital Come grow with us! At University Health, we are building a healthier future with our community hospitals. We welcome driven healthcare leaders who thrive in collaborative environments and are ready to make a lasting impact. University Health Retama Campus University Health Retama Hospital will be located next to the Retama Park Horse Track in Selma off of Loop 1604 and Retama Parkway. This community hospital also includes a 24/7 emergency department, labor and delivery unit, radiology, laboratory, pharmacy, neonatal intensive care unit/nursery, and inpatient units for both adults and children. The hospital will open in 2026-27 with 166 beds and is designed to expand to 286 beds as this area continues to grow. To make it even more convenient for patients, a connected 100,000-square-foot medical office building will offer appointments for a wide range of medical and surgical specialists. University Health is Leading the Way For more than 100 years, University Health has been here to heal, to improve health, to lead, innovate and advance the practice of medicine. Above all, the people of University Health are here to serve all who entrust us with their health and lives with the highest quality care, respect and compassion. At the University Health main campus, University Hospital proudly serves as the primary teaching facility for UT Health San Antonio and is the ___ Position Summary * Efficiently manages the Plant Engineering Department through schedules and controls, procurement and proper use and storage of equipment and supplies, and sound fiscal and productivity programs. * Directly responsible for ensuring building, grounds, machinery, utilities, and distribution system are maintained in good operating condition and repaired promptly and efficiently. Education and Experience Requirements * A Bachelors degree in an Architectural / Engineering or related field, preferably Civil, Mechanical or Electrical or a degree in business management or related field. * Requires a minimum of six years of supervisory experience in physical plant / civil engineering and health care activities is preferred. * Candidates with ten (10) or more years of supervisory experience in physical plant / civil engineering and health care activities may be considered in lieu of a Bachelors degree. * Experience must include general knowledge of central utility plant equipment (chiller, steam boilers, hydraulic systems, building controls, electrical, and air handlers) in a critical building environment. * Preferred candidate will also have a minimum of two (2) years as a Facilities Director in a hospital environment. Total Rewards: * Medical, dental, and vision insurance * Extensive ancillary benefits * Paid Time Off * Excellent Retirement Plans * Prescription drug coverage * Flexible Spending Account * Pet Insurance Apply now and be a part of shaping the future of University Health!

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security (BDS) is currently seeking a Senior Manufacturing Engineering to become part of the Executive transportation Planning team in San Antonio, TX. The selected candidate will lead and support in development, implementation and maintenance of various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Candidate will assist in the identification of tooling requirements and processing tooling orders based on manufacturing and engineering requirements. Team member will be responsible for assisting in the investigation and resolution of manufacturing related issues. May also be responsible for collecting data to support producibility assessments for part or product designs. The successful candidate will assist in developing work statements and sequencing of limited scope with internal business partners and in the review, maintenance and monitoring of internal documents. Team member will work under close supervision. Position Responsibilities: \n • Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners and direct reports. Provides oversight and approval of technical approaches, products and processes\n, • Lead collaboration and integration across the affected commodities\n, • Responsible for integrating changes to the affected commodities and executing the Build Integration milestones\n, • Analyze design/build concepts to evaluate a producible definition and investigating alternative solutions to meet producibility requirement\n, • Develops, implements, and maintains manufacturing plans, Bill of Materials, work instructions, and illustrations to define and document as-built configuration\n, • Investigates and resolves manufacturing related issues that come up during manufacturing activities\n, • Create installation planning and supporting installation planning shipside in San Antonio\n, • Support team performance by participating in process/tool improvement projects\n, • May be required to work overtime, weekends, and holidays, to support business needs and deadlines\n, • Resolves complex technical problems\n, • Provides guidance to others through structured mentoring\n\n This position will be 100% onsite in San Antonio, TX. This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Basic Qualifications (Required Skills/Experience): \n • Bachelor's Degree or higher from an accredited course of study, in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering or similar Engineering degree.\n, • 9+ years of related work experience\n, • Experience in an Electrical Manufacturing Engineering role\n, • Experience in wire bundle fabrication concepts, wiring installation, electrical equipment installation or installation of wiring provisions\n, • 3+ years of experience leading team in a formal and/or informal role\n, • Experience leading or managing a cross-functional project\n\n Preferred Qualifications (Desired Skills/Experience): \n • Experience in commercial or military airplane maintenance and/or modification\n, • Experience testing and trouble shooting of commercial aircraft Avionics and Electrical systems\n, • Experience using Electrical Design Automation (EDA) Tools such as OrCAD, Mentor Graphics, Altium or PSPICE to perform schematic capture, PB design/layout, and circuit simulation\n, • Experience working with WIRS software\n\n Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Shift: This position is for 1st shift. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Experienced: $126,650 - 171,350 Applications for this position will be accepted until Mar. 20, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Director, Facilities Management – University Health Palo Alto Hospital. Preferred candidate will also have a minimum of two (2) years as a Facilities Director in a hospital environment. A Bachelors degree in an Architectural / Engineering or related field, preferably Civil, Mechanical or Electrica

Job DescriptionDescription: About Us: At Tomball Controls, we specialize in manufacturing custom fuel tanks, custom sound attenuated enclosures, and access platforms for emergency power generators. We are proud to serve clients across various industries, providing them with high-quality power packaging solutions to meet their specific requirements. With years of experience among our team members and a commitment to excellence, we have built a reputation for delivering reliable, durable products on time and within budget. Job Description: We are seeking an experienced and highly motivated P4 / S4 Salvagnini Operator to join our manufacturing team. The ideal candidate will have hands-on experience in sheet metal fabrication, a strong understanding of quality systems, and a proactive approach to continuous improvement. Key Responsibilities: Machine Operation & Setup • Safely load and unload sheet metal materials., • Interpret work orders, blueprints, and engineering drawings for accurate part production., • Inspect finished parts using measuring tools (calipers, tape measures, micrometers, gauges), • Identify, troubleshooting, and resolve quality issues, report deviations to supervisors and quality teams., • Adhere to OSHA and company safety procedures, including proper use of PPE, lockout/tagout procedures., • Maintain a clean, organized, and safe work environment at all times., • Perform routine machine inspections, cleaning, lubrication and minor maintenance., • Monitor production flow and coordinate with upstream/downstream operations for efficiency., • Maintain organized tooling, workstations, and material staging areas. Work Environment • Manufacturing floor environment with exposure to machinery, noise, and metalworking processes., • PPE required (safety glasses, steel-toe boots, gloves, hearing protection, etc.). Requirements: Required Qualifications: • HS Diploma or GED., • Strong knowledge of sheet metal fabrication principles., • Ability to read and interpret technical drawings and blueprints., • Proficiency with measurement tools and basic quality inspection processes., • Strong mechanical aptitude and attention to detail., • Ability to lift to 50lbs and stand for extended periods., • Commitment to safety and quality standards. Preferred Qualifications: • Experience with Salvagnini, AMADA, Trumpf, or other CNC fabrication machinery., • Familiarity with automated manufacturing and lean production environments., • Basic understanding of CNC programming or software used with Salvagnini machines (e.g., SDD, S4CAM)., • Forklift or overhead crane operation certification. Equal Opportunity Employer/Minorities/Women/Veterans/Disabled Tomball Controls is an Equal Opportunity and Affirmative Action Employer. Tomball Controls is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Job DescriptionDescription: About Us: At Tomball Controls, we specialize in manufacturing custom fuel tanks, custom sound attenuated enclosures, and access platforms for emergency power generators. We are proud to serve clients across various industries, providing them with high-quality power packaging solutions to meet their specific requirements. With years of experienced team members and a commitment to excellence, we have built a reputation for delivering reliable and durable products on time and within budget. Job Description: We are seeking an experienced and highly motivated Press Brake Operator for our manufacturing team. The ideal candidate will have experience in metal fabrication and press break operations, a strong understanding of fabrication processes, and a commitment to safety and quality standards. Key Responsibilities: Machine Operation • Set up and operate CNC and manual press brake machines to bend sheet metal and plate materials according to specifications., • Read and interpret blueprints, engineering drawings, and bend data to determine correct tooling, machine setup, and bend sequence., • Inspect parts during production using precision measuring tools (e.g., calipers, protractors, angle gauges) to ensure dimensional accuracy and quality standards., • Perform basic maintenance on the press brake and tooling, keeping equipment in proper working order., • Verify that all parts meet dimensional and visual quality standards before moving to the next production stage., • Accurately record production data, materials used, and any nonconformances in accordance with company procedures., • Promptly report defective materials, incorrect drawings, or machine issues to the supervisor. Safety & Housekeeping • Adhere to OSHA and company safety procedures, including proper use of PPE., • Maintain a clean, organized, and safe working environment at all times., • Work collaboratively with fabrication, engineering, and production teams to meet schedules and production goals., • Communicate effectively with engineers, supervisors, and other machine operators regarding setup changes, process issues, or improvement ideas., • Manufacturing floor environment with exposure to machinery, noise, and metalworking processes., • PPE required (safety glasses, steel-toe boots, gloves, hearing protection, etc.). Requirements: Required Qualifications: • High school diploma or GED equivalent., • Minimum 1–4 years of experience operating press brake machines in a fabrication or manufacturing environment., • Strong understanding of blueprint reading, bend allowances, and fabrication drawings., • Skilled in setting up and adjusting CNC Shear controls (e.g., Amada, Accurpress, or similar)., • Proficient with measuring instruments (calipers, micrometers, and protractors.), • Strong mechanical aptitude and attention to detail., • Ability to lift up to 50lbs or more and stand for extended periods., • Experience with Amada, Trumpf, or Accurpress CNC press brakes., • Strong understanding of sheet metal layout, cutting, and forming techniques., • Experience using CNC plasma, laser cutting, or other fabrication machinery. Equal Opportunity Employer/Minorities/Women/Veterans/Disabled: Tomball Controls is an Equal Opportunity and Affirmative Action Employer. Tomball Controls is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Next generational premier MEP engineering firm seeking an experienced Senior Mechanical Engineer to join our growing talented team! This Jobot Job is hosted by: Josh Rabinowitz Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Job Details Bachelor’s Degre

Assistant Project Manager - MEP This Jobot Job is hosted by: Kelly Anne Wight Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $75,000 - $95,000 per year A bit about us: We are a well-established mechanical contracting firm with a strong reputation for delivering high-quality mechanical, plumbing, and fire protection services across a diverse range of sectors, including commercial, healthcare, and institutional projects. With decades of experience and a commitment to innovation, we pride ourselves on our technical expertise, collaborative culture, and dedication to client satisfaction. Our team-driven environment values integrity, safety, and excellence in every project we undertake. Why join us? Join a company where your contributions make a tangible impact on large-scale construction projects throughout the Midwest. We offer opportunities for professional growth, ongoing training, and a supportive work environment that fosters teamwork and development. You will work alongside seasoned industry professionals who are committed to mentoring and empowering the next generation of project leaders. We also provide competitive compensation, comprehensive benefits, and a culture that values work-life balance and employee well-being. Job Details As an Assistant Project Manager, you will play a key role in supporting the successful execution of mechanical and fire protection projects from inception through completion. Your responsibilities will include: • Assisting the Project Manager with project scheduling, budgeting, and coordination, • Communicating effectively with subcontractors, vendors, and clients to ensure project milestones are met, • Monitoring project progress and quality to maintain high standards and compliance with safety regulations, • Preparing and reviewing project documentation, reports, and change orders, • Collaborating closely with field and office teams to solve problems and drive project efficiency, • Bachelor's degree in construction management, engineering, or related field preferred, • Previous experience in mechanical contracting or construction project management is highly desirable, • Strong organizational, communication, and problem-solving skills, • Proficiency with project management software and Microsoft Office Suite Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

JOB TITLE: Electrical & Electronic Functional Test Technician (Early Career) – $5K Relocation Bonus LOCATION: On-site in North Charleston, SC PAY RATE: $26-31/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: * Job Type: Contract (12 months with potential for extension) * Industry: Aerospace / Defense / Aviation * Benefits: Medical, dental, and vision (Cigna) * Perks: Bonus potential + Priority access via Tier 1 supplier * Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: * Are you a U.S. person as defined under ITAR regulations? * Do you meet the educational and experience requirements for this role? * Can you commute to the job location or relocate if necessary? Summary: * Perform routine production assembly on structural parts, mechanical assemblies, subassemblies, and aircraft systems using manual operations. * Conduct functional testing of aircraft electrical systems and components. * Troubleshoot and repair aircraft systems and faults. * Assess and document test or analysis data to ensure compliance. * Identify roadblocks and production constraints; escalate unresolved issues with clear communication. * Support team performance through cross-training and mentoring. * Maintain high standards of safety and regulatory compliance. * Work variable shifts (1st, 2nd, or 3rd). Requirements: * High School diploma or GED; vocational school or associate degree also accepted. * 1+ years of experience in aerospace, fabrication, or manufacturing. * 1+ years of experience in electrical assembly and/or electronic materials. * 1+ years of experience in avionics systems troubleshooting, wire bundle installation, and aircraft electrical systems troubleshooting. * 1+ years using software applications: internet navigation, email, Microsoft Suite, or other specialized tools. * 1+ years following detailed work instructions and interpreting blueprints, drawings, or specifications in English. * Ability to meet physical requirements: flexion/extension (head bent down/up), kneeling, bending at the waist, reaching overhead, twisting, standing, walking, climbing/balancing (stairs, ladders, scaffolding), crawling, and crouching. * Ability to lift and carry required materials as needed. * Must be able to work variable shifts. * Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights—apply today!

JOB TITLE: Aircraft Systems – Early Career – $5K Relocation Bonus LOCATION: North Charleston, SC PAY RATE: $26-31/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: * Job Type: Contract (12 months with potential for extension) * Industry: Aerospace / Defense / Aviation * Benefits: Medical, dental, and vision (Cigna) * Perks: Bonus potential + Priority access via Tier 1 supplier * Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: * Are you a U.S. person as defined under ITAR regulations? * Do you meet the educational and experience requirements for this role? * Can you commute to the job location or relocate if necessary? Summary: * Performs routine production assembly operations on structural and mechanical assemblies, subassemblies, and aircraft systems using manual operations. * Install parts and assemblies including landing gear, control surfaces, exterior panels, interior components (carpets, stowbins, sidewalls, lavatories, galleys, seats). * Install aircraft system components such as tubing, valves, regulators, actuators, compressors, and ducts. * Use hand tools and diagnostic equipment (screwdrivers, ratchets, power tools, multimeters, continuity testers). Requirements: * High School Diploma or GED required. * Typically 1+ year of related work experience or equivalent (vocational school/Associate acceptable). * 6+ months experience using computer applications (Internet navigation, email, Microsoft Suite, or similar). * 6+ months experience following detailed work instructions and interpreting blueprints, drawings, or specifications in English. * 6+ months experience in advanced manufacturing, technical, or mechanical work using hand, power, and pneumatic tools. * 6+ months experience in structural parts fabrication and assembly processes/procedures. * Ability to work variable shifts (1st, 2nd, or 3rd). * Ability to perform physical tasks: kneeling, bending, reaching overhead, climbing/balancing (ladders, scaffolding, inclined surfaces), crawling, crouching, twisting, standing, and walking. * Lift/carry up to 35 lbs. * Ability to work with high-hazard chemicals. * Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights—apply today!

JOB TITLE: Electrical Install Assembler (Early Career) - Free Housing Support ($5K Relocation Bonus) LOCATION: On-site in North Charleston, SC PAY RATE: $26-31/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: * Job Type: Contract (12 months with potential for extension) * Industry: Aerospace / Defense / Aviation * Benefits: Medical, dental, and vision (Cigna) * Perks: Bonus potential + Priority access via Tier 1 supplier * Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: * Are you a U.S. person as defined under ITAR regulations? * Do you meet the educational and experience requirements for this role? * Can you commute to the job location or relocate if necessary? Summary: * Route wire harnesses to supports per blueprint instructions and 787 specifications. * Build connectors, splice wires, crimp, and terminate wiring. * Install connectors to receptacles and electronic components. * Perform repairs and rework processes to incorporate authorized engineering changes. * Conduct fiber optic cleaning, inspection, light loss testing, routing, and installation. * Perform bond and ground operations, including CRNs, jumpers, ground stud installation, and resistance testing. Requirements: * High School Diploma or GED required; vocational school or Associate degree preferred. * 6+ months of experience using software applications such as internet navigation, email, Microsoft Office, or other specialized programs. * 6+ months of experience following detailed work instructions and interpreting blueprints, drawings, or specifications in English. * 6+ months of experience in advanced manufacturing, technical, or mechanical environments using hand, power, or pneumatic tools. * 6+ months of experience with structural parts fabrication and assembly processes. * Ability to perform tasks requiring bending, kneeling, crouching, standing, walking, climbing/balancing, reaching overhead, twisting, and head/neck rotation. * Ability to lift and carry up to 35 lbs. * Ability to work safely with high-hazard chemicals. * Must be able to work variable shifts (1st, 2nd, or 3rd) based on business need. * Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights—apply today!

JOB TITLE: 787 A&P Avionics Electrical Technician - 5K Bonus LOCATION: San Antonio, TX PAY RATE: $29-36/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: * Job Type: Contract (12 months with potential for extension) * Shift Information: This is a variable shift position. Shift assignment will be determined at the time of hire based on business needs. The selected candidate will remain on the assigned shift until a re-evaluation is required. * Industry: Aerospace / Defense / Aviation * Benefits: Medical, dental, and vision (Cigna) * Perks: Bonus potential + Priority access via Tier 1 supplier * Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: * Are you a U.S. person as defined under ITAR regulations? * Do you meet the educational and experience requirements for this role? * Can you commute to the job location or relocate if necessary? Summary: * Perform flight test installations and aircraft functional testing * Assist in troubleshooting pneumatic, hydraulic, electrical, and avionics systems to isolate mechanical and/or electrical/electronic faults and support repair of faulty components * Assist with pre-flight and post-flight checks and perform maintenance and modification actions * Resolve identified issues during operation and testing of deliverable products * Verify accuracy of work performed and conduct self-inspections as required * Assist in performing system and subsystem pre-delivery inspections and aircraft maintenance in preparation for delivery * Participate in determining assignment details to accomplish a wide range of objectives * Plan, schedule, and coordinate assigned activities with guidance from team leads; work is reviewed upon completion for adequacy in meeting objectives * Demonstrate professional workplace behaviors and adherence to organizational standards Requirements: * Education and experience typically acquired through basic education (e.g., High School diploma or GED) and typically 1+ years of related work experience, or an equivalent combination of education and experience (e.g., vocational training or Associate degree). * Ability to work any shift, including days, nights, and weekends * Minimum 6 months of avionics and/or electrical experience * Minimum 6 months of experience working with live aircraft systems and flight operations * Minimum 6 months of experience and/or knowledge of Foreign Object Debris (FOD) prevention and risk mitigation * Must be a U.S. Citizen (as defined by ITAR). Preferred Qualifications: * 3+ years of related work experience or an equivalent combination of education and experience * FAA Airframe & Powerplant (A&P) License * 6+ months of aerospace, fabrication, or manufacturing experience * 6+ months of wide-body aircraft program experience * Experience with production systems and lean manufacturing environments * 6+ months of field or flight line operations experience About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights—apply today!

JOB TITLE: Entry-Level Aircraft Structures Assemblers – $5K Relocation Bonus LOCATION: North Charleston, SC PAY RATE: $26-31/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: * Job Type: Contract (12 months with potential for extension) * Shifts: Variable; must be able to work 1st, 2nd, or 3rd shift based on business need. * Industry: Aerospace / Defense / Aviation * Benefits: Medical, dental, and vision (Cigna) * Perks: Bonus potential + Priority access via Tier 1 supplier * Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: * Are you a U.S. person as defined under ITAR regulations? * Do you meet the educational and experience requirements for this role? * Can you commute to the job location or relocate if necessary? Summary: * Performs routine production assembly operations on structural and mechanical assemblies, subassemblies, aircraft systems, equipment, and accessories using manual operations. * Assemble aircraft structural components using hand tools, power tools, and precision measuring equipment. * Interpret basic blueprints, work instructions, and engineering drawings to complete assigned tasks. * Prepare, fit, and secure parts using drilling, riveting, and fastening techniques. * Inspect completed work for accuracy, proper alignment, and quality compliance. * Maintain a clean, organized, and safe work area in accordance with shop and OSHA standards. * Report any defects, tooling issues, or material discrepancies to the lead or supervisor. Requirements: * High School Diploma or GED required; vocational school or associate degree preferred. * 6+ months of experience using basic hand, power, and pneumatic tools in an advanced manufacturing, mechanical, or technical environment. * 6+ months of experience following detailed work instructions and interpreting blueprints, drawings, or specifications in English (1+ year preferred per Boeing requirements). * 6+ months of experience using computer applications such as email, internet navigation, Microsoft Office, or other specialized software. * Ability to use structural assembly tools including high-speed/low-speed drills, pneumatic and electric drills, nut runners, and Quackenbush tools. * Experience setting up and validating jigs and tooling, performing close-tolerance drilling, and completing installations in critical aircraft structural areas. * Proficient with calibrated precision measuring tools and skilled in fastener installation and removal. * Experience working with CFRP, aluminum, and titanium for drilling, sanding, trimming, and shimming. * Ability to meet physical demands including bending, kneeling, standing, crouching, crawling, climbing/balancing, reaching overhead, twisting, and repetitive movement. * Ability to lift up to 35 lbs and work safely around high-hazard chemicals. * Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights—apply today!

JOB TITLE: In-Tank Sealant Mechanic (Entry Level) – $5K Relocation Bonus LOCATION: North Charleston, SC PAY RATE: $26-31/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: * Job Type: Contract (12 months with potential for extension) * Industry: Aerospace / Defense / Aviation * Benefits: Medical, dental, and vision (Cigna) * Perks: Bonus potential + Priority access via Tier 1 supplier * Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: * Are you a U.S. person as defined under ITAR regulations? * Do you meet the educational and experience requirements for this role? * Can you commute to the job location or relocate if necessary? Summary: * Perform routine production assembly operations on structural and mechanical assemblies, subassemblies, and aircraft systems using manual operations. * Work variable shifts (1st, 2nd, or 3rd). * Read, comprehend, and follow technical work instructions, drawings, and specifications in English. * Apply sealant to surfaces per specifications. * Install various aircraft system components, including panels. * Operate mechanical lifts (e.g., ladders, tiger lifts, snorkel lifts). * Use chemical solvents, sealants, coatings, primers, adhesives, paints, and special finishes. * Work in confined spaces with associated training and certification. * Carry and lift up to 35 pounds. * Perform bond and ground measurements. * Conduct in-tank sealing and structural work in fuel tanks. * Wash fuel tanks and perform rework as needed. * Maintain high standards of safety and regulatory compliance. Requirements: * High School Diploma or GED required; vocational school or associate degree is a plus. * 6+ months using software applications (internet, email, Microsoft Suite, or other specialized tools). * 6+ months following detailed work instructions and interpreting blueprints, drawings, or specifications in English. * 6+ months in an advanced manufacturing, technical, or mechanical environment using hand, power, and pneumatic tools. * 6+ months applying chemical solvents, sealants, coatings, primers, adhesives, paints, and special finishes. * Work in confined spaces with proper training and certification. * Carry and lift up to 35 pounds. * Perform tasks including kneeling, bending, reaching overhead, twisting, standing, walking, climbing/balancing, crawling, and crouching. * Ability to work variable shifts (1st, 2nd, or 3rd). * Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights—apply today!

JOB TITLE: Electrical Install Assembler (Early Career) - Free Housing Support ($5K Relocation Bonus) Location: On-site in North Charleston, SC PAY RATE: $26-31/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: * Job Type: Contract (12 months with potential for extension) * Industry: Aerospace / Defense / Aviation * Benefits: Medical, dental, and vision (Cigna) * Perks: Bonus potential + Priority access via Tier 1 supplier * Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: * Are you a U.S. person as defined under ITAR regulations? * Do you meet the educational and experience requirements for this role? * Can you commute to the job location or relocate if necessary? Summary: * Route wire harnesses to supports per blueprint instructions and 787 specifications. * Build connectors, splice wires, crimp, and terminate wiring. * Install connectors to receptacles and electronic components. * Perform repairs and rework processes to incorporate authorized engineering changes. * Conduct fiber optic cleaning, inspection, light loss testing, routing, and installation. * Perform bond and ground operations, including CRNs, jumpers, ground stud installation, and resistance testing. Requirements: * High School Diploma or GED required; vocational school or Associate degree preferred. * 6+ months of experience using software applications such as internet navigation, email, Microsoft Office, or other specialized programs. * 6+ months of experience following detailed work instructions and interpreting blueprints, drawings, or specifications in English. * 6+ months of experience in advanced manufacturing, technical, or mechanical environments using hand, power, or pneumatic tools. * 6+ months of experience with structural parts fabrication and assembly processes. * Ability to perform tasks requiring bending, kneeling, crouching, standing, walking, climbing/balancing, reaching overhead, twisting, and head/neck rotation. * Ability to lift and carry up to 35 lbs. * Ability to work safely with high-hazard chemicals. * Must be able to work variable shifts (1st, 2nd, or 3rd) based on business need. * Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights—apply today!

Must have 4 years of post-baccalaureate experience or research as a Research Engineer or related automotive engineering research role. Requirements: Requires a Masters degree or foreign equivalent, in Mechanical Engineering or Automotive Engineering. The 4 years of experience must include automotive

Job Description Essential Functions To perform this job successfully, an individual must satisfactorily perform each of the essential functions. The requirements below represent the required knowledge, skills, and/or abilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position Summary: The Support Case Coordinator provides essential administrative support to both Associate and Senior Case Coordinators, ensuring the efficient handling of case-related tasks. Responsibilities include initiating new cases, completing case entry in the Case Management System, and conducting conflict checks. This role also supports daily operations by entering Expert time into Expert Case, logging expenses in Expense Point, transcribing Vehicle and Site Inspection notes, preparing report shells, and managing deposition errata. The Support Case Coordinator plays a critical behind-the-scenes role in maintaining workflow efficiency, accuracy, and timely case progression within the department. Key Responsibilities & Performance Indicators: · Enter and update new case information into the Case Management System. · Run daily conflict checks and escalate flags to the appropriate Case Coordinator. · Prepare standard case documents such as acceptance letters, deposition errata, and report shells. · Transcribe notes from vehicle and site inspections in a timely manner. · Complete daily Expert time entry and weekly expense reports. · Ensure all entries and submissions are compliant with BRC’s formatting and accuracy standards. · Track completion of task assignments and follow up on pending inputs. · Coordinate with Associate and Senior Case Coordinators to stay aligned on task priorities. · Maintain digital and physical file organization per internal protocols. · Provide responsive administrative assistance to Experts as directed. · Communicate clearly and professionally with internal teams. · Attend and complete required training sessions in systems, protocols, and role expectations. Escalate obstacles or delays proactively to prevent disruption of Expert schedules. · Demonstrate ownership of assigned duties and initiative in learning new processes. · Follow internal policies, confidentiality standards, and document management protocols. Required Software Skills • Proficient in Microsoft Office Suite (Word, Excel, Outlook) and Adobe Acrobat Travel Required: None Required Work Experience: ·Three + years of executive/legal assistant experience required in the legal fields of product liability and/or personal injury environments. Ideal Education and Work Experience: · Associate or Bachelor’s degree in business administration, legal studies, or a related field. · Experience working in environments that demand precision, adaptability, and decisive judgement. · Comfortable managing shifting priorities and multiple deliverables with composure and focus. Physical Demands: While performing the duties of this job, the employee is regularly required to sit and use hands and fingers. The employee is frequently required to talk or hear. The employee must occasionally lift and/or move up to 15 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus. The workspace for this position will be a cubicle solely occupied by the individual, in a purpose-grouped location. The noise level in the work environment is usually moderate. Work Authorization/Security Clearance Requirements: Must be authorized to work in the United States. Affirmative Action/EEO Statement: We are an Equal Employment/Affirmative Action employer. We do not discriminate in hiring based on sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. Other Duties as Assigned: Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time with or without notice. Company DescriptionBiodynamic Research Corporation (BRC) is a professional services firm specializing in biomechanical analysis and accident reconstruction. BRC is located in San Antonio, Texas and serves clients throughout the United States, Puerto Rico, Canada, and Mexico. BRC was founded in 1986 by Dr. James V. (Jim) Benedict, a physician with a PhD in Mechanical Engineering. The focus of BRC at that time was to retrospectively analyze automotive collisions, determine the application of the collision’s forces to the vehicle occupants, and determine the injury consequences. Over the years, BRC has applied this type of analysis to numerous traumatic incidents including, but not limited to, both high and low velocity passenger vehicle collisions, slip and fall events, and injury events involving aircraft, bicycles, motorcycles, ATVs, boats, elevators, forklifts, tractor-trailers, trains, amusement park rides, power tools and light industrial equipment. Today, BRC has more than 60 full-time and part-time personnel performing or supporting a myriad of professional service activities related to biomechanics and accident reconstruction. These include physicians, most of whom also have engineering degrees, or who have a PhD in engineering, technicians with degrees in engineering, Nurse Analysts, Paralegals, Visual Communications professionals and a Research Librarian, as well as various administrative support professionals. BRC's experts are oftentimes designated and asked to provide expert analysis and testimony during litigation proceedings. Over the past 25+ years, in addition to numerous depositions, BRC’s experts have testified in more than 1000 trials throughout the United States as well as in Puerto Rico, and several Canadian provinces. BRC has also conducted extensive internally funded research related to biomechanics and accident reconstruction. This research has been published in a variety of peer-reviewed technical journals.Biodynamic Research Corporation (BRC) is a professional services firm specializing in biomechanical analysis and accident reconstruction. BRC is located in San Antonio, Texas and serves clients throughout the United States, Puerto Rico, Canada, and Mexico.\r\n\r\nBRC was founded in 1986 by Dr. James V. (Jim) Benedict, a physician with a PhD in Mechanical Engineering. The focus of BRC at that time was to retrospectively analyze automotive collisions, determine the application of the collision’s forces to the vehicle occupants, and determine the injury consequences. Over the years, BRC has applied this type of analysis to numerous traumatic incidents including, but not limited to, both high and low velocity passenger vehicle collisions, slip and fall events, and injury events involving aircraft, bicycles, motorcycles, ATVs, boats, elevators, forklifts, tractor-trailers, trains, amusement park rides, power tools and light industrial equipment.\r\n\r\nToday, BRC has more than 60 full-time and part-time personnel performing or supporting a myriad of professional service activities related to biomechanics and accident reconstruction. These include physicians, most of whom also have engineering degrees, or who have a PhD in engineering, technicians with degrees in engineering, Nurse Analysts, Paralegals, Visual Communications professionals and a Research Librarian, as well as various administrative support professionals.\r\n\r\nBRC's experts are oftentimes designated and asked to provide expert analysis and testimony during litigation proceedings. Over the past 25+ years, in addition to numerous depositions, BRC’s experts have testified in more than 1000 trials throughout the United States as well as in Puerto Rico, and several Canadian provinces.\r\n\r\nBRC has also conducted extensive internally funded research related to biomechanics and accident reconstruction. This research has been published in a variety of peer-reviewed technical journals.

Job Description SUMMARY We are seeking an experienced Electrical Designer or Electrical Engineer to take ownership of the electrical backbone of our generator enclosures and control systems. This is a pre-manufacturing design role. You'll work closely with mechanical designers, project managers, and shop floor teams to make sure our electrical systems are rock solid before a single wire is pulled. You'll be responsible for translating customer requirements and internal standards into accurate, build-ready electrical designs—including generator wiring diagrams, control panel layouts, conduit runs, and power distribution systems. Your work will be the blueprint for both production and electrical integration. RESPONSIBILITIES • Develop electrical layout drawings, panel designs, and wiring diagrams for generator enclosures and associated systems, • Create accurate conduit and load center layouts that comply with applicable codes and standards, • Work within AutoCAD or SolidWorks (electrical modules preferred, but not required) to produce clean, buildable designs, • Collaborate with mechanical design and manufacturing teams to ensure complete, aligned documentation packages, • Apply knowledge of NEC, UL508A, UL891, and UL1558 to designs and material selections, • Prepare detailed BOMs and support panel and wiring integration, • Review customer specs, evaluate feasibility, and ensure compliance, • Strong proficiency in AutoCAD and/or SolidWorks (Electrical a plus), • Experience in generator systems, commercial MEP design, or similar industrial electrical environments, • Ability to read, interpret, and produce detailed electrical drawings, • Familiarity with NEC, UL508A, and UL891/1558 standards, • Self-motivation, accountability, and the ability to work quickly without sacrificing quality, • Power generation, backup systems, or switchgear experience is a plus, • Degree in Electrical Engineering preferred; equivalent hands-on experience strongly considered, • PE license not required but welcome, • Primarily office/computer-based with periodic visits to the shop floor, • Must be comfortable walking fabrication areas or reviewing in-progress work, • Occasional travel possible for customer coordination or vendor engagement

Job Description Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time. Here, your work matters. You'll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you're just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact. Reports to: Account Manager or Account Executive FLSA Status: Exempt The Company Texas AirSystems is the largest independent HVAC Equipment and Solutions provider in Texas. Our company has grown to five offices and over 400 employees throughout Texas, with headquarters in Irving, next to the DFW airport. We are proud members of ASA, ASHRAE, BOMA, CEF, TEXO & USGBC. We represent over 60 manufacturers, offering innovative systems with a flexibility of equipment and solutions to best match each application. We work with industry professionals and end users from the conceptual stage of projects to provide energy efficient, value‐added solutions to their complex problems Our overall mission is simple: we want to create value and make a difference every day in our journey to be the best HVAC sales and service organization in North America. We believe we can succeed in that mission by being the BEST provider for our clients, the BEST partner for manufacturers, the BEST company for our employees, and the BEST investment for our current and future shareholders. The Opportunity We are seeking a Project Manager for Air Distribution products we sell. Those include GRD (Grilles, Registers & Diffusers), Fans, VAV Boxes (Terminal Units), Louvers, Dampers, Sound Attenuation, Heaters. As the Project Manager, this individual will be responsible for coordinating submittals, pricing and ship dates for each project, managing the project from beginning to end. Must be detail and customer service oriented and have excellent organizational skills. Position requires a high level of oral and written correspondence with the Sales Team, Customers and Manufacturers to ensure timely completion of assigned projects while maintaining customer satisfaction. Must be able to work well with others in a fast-paced & high-volume environment. Responsibilities • Create and maintain job files for each project throughout its duration, • Optimize the project through the stages of product selection, specifications, plans, estimates, proposals, ordering and follow through, • Manage multiple projects on an ongoing basis, • Communicate with owners, architects, MEP Consultants and General, Mechanical and Electrical Contractors, • Organize project related data for order entry, • Respond to and track IOM & Submittal requests, • Read, understand and interpret building plans & specifications, • Develop and grow relationships with customers, contractors, project engineers and manufacturers, • Determine project requirements, constraints, and sales team responsibilities to meet all of the customer's system design, installation and maintenance expectations, • 2-5 years of experience as a Project Manager in HVAC Air Distribution products, estimating, engineering, construction management or contracting environment; or 7-10 years equivalent combination of education and experience, • Working knowledge of MEP consulting, architecture, design, CAD, general contracting, mechanical contracting, engineering or construction industry a plus, • Ability to prioritize, multi-task, deal with ambiguity and manage high volume projects, • Strong PC skills in Microsoft Office applications including Word, Excel, PowerPoint, and Outlook Strategic Skills Ability to learn new skills and knowledge. Ability to understand concepts and complexity comfortably. Open to change and will try anything to find solutions. Able to handle uncertainty and make decisions without knowing the whole story Operating Skills Ability to discern between tasks to determine how best to accomplish goals and organize task/people assignments to get results in a timely way. Ability to figure out processes and simplify them in order to maximize work flow. Behavior Skills Ability to manage people and situations when conflicts arise. Ability to seize opportunities with the drive to complete goals. Personal and Interpersonal Skills Ability to establish and grow relationships with customers through effective verbal and written communication. Dedicated to the needs of the customers, manufacturers and peers and has the patience to actively listen to all business partners. Able to solve problems and skillfully negotiate with a minimum of noise while managing stress. Demonstrates integrity and trust through appropriate directness and truthfulness. Ability to understand personal strengths and weaknesses, seek feedback and improve upon shortcomings. Environmental Requirements Will be required to work in an office environment and frequently in the field. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard and telephone, reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job DescriptionOverview We are seeking a dedicated and experienced Commercial HVAC Project Manager to join our team in San Antonio, TX. In this role, you will oversee HVAC projects from inception to completion, ensuring that all work is executed efficiently and to the highest standards. If you have a passion for HVAC systems and a knack for project management, we want to hear from you! Responsibilities • Lead and manage HVAC projects, ensuring timely completion within budget., • Coordinate with clients, contractors, and team members to establish project goals and timelines., • Conduct site visits to assess project progress and address any issues that arise., • Prepare and present project proposals, including cost estimates and timelines., • Ensure compliance with all safety regulations and industry standards., • Manage project documentation, including contracts, change orders, and progress reports., • Provide technical support and guidance to team members throughout the project lifecycle., • Foster strong relationships with clients to ensure satisfaction and repeat business. Qualifications, • Bachelor's degree in Mechanical Engineering, Construction Management, or a related field is preferred, • Minimum of 3 years of experience in Commercial HVAC project management., • Strong knowledge of HVAC systems, installation, and maintenance practices., • Proficient in project management software and tools., • Excellent communication and interpersonal skills., • Ability to manage multiple projects simultaneously and meet deadlines., • Strong problem-solving skills and attention to detail., • Valid driver's license and willingness to travel to job sites as needed.

Job Description Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time. Here, your work matters. You'll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you're just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact. Reports to: Area Service Manager FLSA Status: Non-Exempt Location: Schertz, TX The Opportunity We are seeking an experienced Commercial HVAC Service Technician. This position will be responsible for performing electrical and mechanical inspection, start-up maintenance on the equipment we sell. This is a full-time opportunity for an energetic go-getter. An ideal candidate will be customer service oriented and work well with others. Position requires a high level of correspondence with Project Managers, Service Coordinators and customers. Responsibilities • Performs electrical and mechanical inspection and maintenance on equipment to ensure peak performance, • Perform specific preventative maintenance including belt adjustments, oiling, greasing and cleaning of equipment, • Uses experience and technical skills with preventive maintenance and system operations to determine service requirements, • Ability to interpret engineering drawings in reference to layout, location and operation of the system(s), • Represents the company in a positive manner to other trades, contractors and owners, • Advises owner/representative of preventive maintenance inspections performed and corrective actions to be taken, • Suggest additional services that are beneficial to customer, • Works in a team-based environment to share information and workload while ensuring customer satisfaction, • Submits required paperwork to Service Coordinator in a timely manner, • Must work in a safe manner on a daily basis and ensure that all safety measures are taken at all times, • Performs other duties as assigned, • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Must have current HVAC certification and OSHA 10 Training plus 5+ years' experience working as a Service Technician in a commercial environment, • Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad), • Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations per engineering direction.Reads and comprehends construction drawings and specifications.Lays out and installs piping, equipment, and other mecha

Job Description Situated in the heart of downtown, overlooking Travis Park, the AAA Four Diamond, St. Anthony Hotel offers easy access to the trendy restaurants and historical landmarks in San Antonio, Texas. St. Anthony, a Luxury Collection Hotel San Antonio, opened in 1909 and has been designated a national historic site. Our luxury hotel in San Antonio embodies old-world splendor with touches like Italian marble and Corinthian columns. Come make history with this luxury San Antonio hotel. At Crescent Hotels & Resorts, we are a team of hospitality professionals that are deeply connected to & proud of the exceptional experiences we provide for our guests. More than that, we know our Associates are the shining stars of what we do! We understand what it takes to be a part of something great. We will encourage you to bring your true self to work every day, we will celebrate you and we will cheer you on as you shine bright in your career journey. Whether it be our health & wellness programs, best in class learning and development or our travel discounts that ‘feed your inner explorer’, we work hard to create and deliver on what YOU need. We are ready for you to start your journey with us where You Belong. We Care. Shine Bright. We are committed to providing you with: • Highly competitive wages, • An exceptional benefit plan for eligible associates & your family members, • 401K matching program for eligible associates, • Flexible scheduling to allow you to focus on what is important to you ESSENTIAL JOB FUNCTIONS: * * Preventative Maintenance & Repairs * Perform scheduled preventative maintenance assignments (e.g., “room care”) to ensure all guest rooms, public areas, and back-of-house spaces are in excellent condition. * Complete work orders, including but not limited to: replacing ceiling tiles and light bulbs, patching vinyl, touching up paint, and other minor repairs to maintain product quality standards. * Inspect, troubleshoot, and perform routine maintenance on electrical systems (e.g., air conditioning controls, lighting, televisions), plumbing fixtures (e.g., sinks, toilets, pipelines), and hotel equipment. * Major Equipment Assistance * Assist with routine and major repairs of hotel equipment including small appliances, kitchen and laundry equipment, boilers, pool systems, HVAC units, and mechanical systems. * Maintain and operate power tools, hand tools, and other equipment safely and effectively. * Pool Maintenance * Service and maintain the hotel’s pool, including testing and adjusting chemical levels, cleaning filters, and completing maintenance logs to ensure compliance with safety standards. * Property Appearance & Curb Appeal * Maintain the building exterior and grounds, including landscaping, painting, and snow removal (if applicable), ensuring a clean and welcoming environment for guests. * Refurbish and repair furniture, fixtures, and finishes in guest rooms and public spaces. * Guest Service & Communication * Respond promptly and professionally to guest requests, questions, and concerns to ensure a positive guest experience. * Maintain clear and timely communication with management and other departments regarding maintenance status and needs. * Supervision & Teamwork * Lead and assist other maintenance team members in daily tasks and special projects. * Ensure compliance with safety protocols and company policies. * General Duties * Operate heavy machinery as needed. * Be available to work a flexible schedule, including weekends and holidays, based on hotel needs. * Perform other job-related duties as assigned. REQUIREMENTS: * Previous hotel maintenance or engineering experience preferred. * Knowledge of HVAC, electrical, plumbing, and mechanical systems. * Ability to read and interpret work orders, safety rules, operating and maintenance instructions, and procedure manuals. * Strong problem-solving skills and attention to detail. * Excellent communication and guest service skills. * Ability to lift, push, or pull up to 50 lbs and work in varying temperatures and conditions. PERFORMANCE STANDARDS: Customer Satisfaction: Our customers are what we are about. One of the keys to a positive guest experience is positive interaction with Crescent staff. It is essential that you remain professional at all times, and that you treat all guests and associates with courtesy and respect, under all circumstances. Every Crescent associate is a guest relations ambassador, every working minute of every day. Work Habits: In order to maintain a positive guest and associate experience, your work habits should always meet and strive to exceed hotel standards for work procedures, dress, grooming, punctuality and attendance. You should be adaptable to change in your work area and in hotel procedures with a willingness to learn new skills and/or improve existing ones, have the ability to solve routine problems that occur on the job and ask for help whenever you are not sure how to do something. Safety & Security: The safety and security of our guests and associates is of utmost importance to Crescent. Every Crescent associate should adhere to the hotel security policies and procedures, particularly regarding key controls, lifting heavy objects, using chemicals, and effectively reporting safety hazards and safety concerns.

Job Description Warren Oil Company is now accepting Maintenance Technician applications for immediate hire. In this job, you will perform repairs on all plant equipment as well as provide ongoing maintenance of the facility. Install, maintain, and repair equipment, electrical wiring, and fixtures. You will also ensure that work is in accordance with relevant codes. Duties & Responsibilities: • Start machines and observe mechanical operation to determine efficiency and to detect/diagnose potential problems., • Read work orders and specifications to determine machines and equipment requiring repair or maintenance., • Responsible for the repair, adjustments and ongoing maintenance of facilities., • Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs., • Communicate with coworkers to coordinate installations or repairs., • Improves Equipment and Process Reliability., • High School Diploma or GED, • 3-5 years of industrial or manufacturing maintenance experience required, • Strong organizational skills and the ability to multi-task, • Problem- solving ability, • Ability to work with others, • Mechanical and electrical skills, • Willingness to support all line operations to maximize equipment availability and efficiency, • Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance., • Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications., • Design Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models., • Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services, • Ability to perform periodic tests or checks on all electrical equipment to troubleshoot, diagnose, and repair equipment breakdowns involving mechanical, electrical, hydraulic and pneumatic components. WARREN OIL COMPANY, INC. began in 1976 with one semi-automatic packaging line. Warren Oil Company, Inc. owns and operates six manufacturing and packaging facilities strategically located to serve customers in the Northeast, Southeast, Southwest, Midwest, and West coast. Warren Oil Company, Inc. exports to more than 50 countries. Warren Oil Company purchased three of its five plants from Pennzoil. All of Warren's facilities are equipped to manufacture and package a diverse product slate ranging from automotive motor oils to charcoal lighter fluid. Warren Oil Company, Inc. holds the distinction of having the largest number of American Petroleum Institute engine oil licenses and certifications. Warren Companies manufacture and package lubricants under several proprietary registered trademarks; e.g., Warren, Lubriguard, Autoguard, Itasca, Coastal, LubriGold and Saxon. Additionally, Warren manufacturers and packages automotive, truck and small engine lubricants for several large corporations. We are and Equal Opportunity/ Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job Description Mold Maintenance Supervisor Location: San Antonio, Texas Reports To: Engineering or Production Manager Position Summary The Mold Maintenance Supervisor is responsible for overseeing all aspects of mold acquisition, mold design, development of molding processes, and ongoing mold maintenance for both interior and exterior automotive plastic parts. This position plays a key role in ensuring the optimal performance, durability, and quality of molds used in production by coordinating maintenance strategies, leading continuous improvement initiatives, and applying engineering best practices. The successful candidate will have a hands-on leadership style, a solid technical background in mold design and fabrication, and a strong commitment to safety, quality, and cost-efficiency. This role requires cross-functional coordination between engineering, production, maintenance, and quality departments. Essential Responsibilities Lead and supervise daily mold maintenance activities to ensure molds are clean, functional, and production-ready. Oversee the purchase, commissioning, and modification of injection molds in alignment with part design and production specifications. Develop and optimize molding processes to improve part quality, reduce cycle time, and extend mold life. Utilize 3D CAD software to design and review mold structures, ensuring manufacturability and ease of maintenance. Identify and implement cost reduction and productivity improvements related to mold maintenance, design, or process changes. Analyze mold failures or quality issues using engineering principles, statistical tools, and root cause analysis methods. Recommend and implement corrective actions, including changes to mold designs, tolerances, materials, and processing methods. Ensure adherence to safety and cleanliness standards in the mold maintenance and molding departments. Manage maintenance records, preventive maintenance schedules, and inventory of mold components and spare parts. Train and develop mold technicians and maintenance team members on best practices and new technologies. Collaborate with global and domestic suppliers and engineering teams during mold development, sourcing, and maintenance planning. Qualifications & Requirements Education: Bachelor’s degree in Industrial Engineering, Mechanical Engineering, Automotive Engineering, or a related field; or equivalent combination of education and relevant work experience. Experience: Minimum of two (2) years of hands-on experience in mold manufacturing, tooling, or maintenance, preferably in an automotive or plastic injection molding environment. Skills & Competencies: Working knowledge of plastic injection molding processes and tooling design. Proficiency with 3D CAD modeling software (e.g., SolidWorks, CATIA, NX). Strong problem-solving and analytical skills using statistical and engineering tools. Effective communication and leadership skills with the ability to manage a team and coordinate across departments. Familiarity with safety protocols, root cause analysis techniques (5-Why, Fishbone), and preventive maintenance practices. Additional Requirements: Willingness and ability to travel up to 5% domestically and internationally to support mold projects or supplier visits. About Toyoda Gosei Toyoda Gosei is a world-class automotive supplier and a trusted partner to leading OEMs, including Toyota. With a strong commitment to innovation, safety, and sustainability, we manufacture and deliver high-quality automotive components that meet the dynamic needs of the industry. We offer a collaborative, diverse, and inclusive work environment where employees can thrive and grow. Toyoda Gosei is an equal opportunity employer. All applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability

Job Description We are seeking a talented individual to join our small team and grow with us as we continue to provide outstanding testing services for the San Antonio & surrounding area. Some desired traits are: ...certified through NEBB as a CT or CP ...engineering degree, especially mechanical ...can work alone, as crew lead and/or as technician, whatever is most efficient for the job at hand. ...enjoys problem solving. ...has a theoretical understanding of thermodynamics ...is willing to take the extra step that is often needed to do things the right way. ...isn't afraid to get a bit dirty ...is flexible and able to adapt to changes in plans and still be productive. ...has excess trustworthiness & integrity. Company DescriptionAt Reynolds Engineering, LLC, our business is built on integrity, expertise and dedication.At Reynolds Engineering, LLC, our business is built on integrity, expertise and dedication.

Job DescriptionDescription: Job Summary: The Welder Fabricator is responsible for certified structural welding, custom fabrication, mechanical installation, and equipment support across the facility. This position supports the Maintenance and Kaizen teams by designing, fabricating, and installing engineered solutions that improve equipment reliability, safety, and efficiency. Additionally, this role performs mechanical work including hydraulic and water pump replacement, electric motor disconnection and reconnection. Main Duties and Responsibilities (Other duties may be assigned) • Perform certified structural welding in accordance with applicable codes, specifications, and company safety standards, • Design, fabricate, and install custom components including structural supports, guards, fixtures, platforms, and equipment modifications, • Independently develop fabrication solutions when drawings or prints are not available, • Generate materials requisition for fabrication projects, including materials, hardware, and consumables, • Execute 100% turnkey fabrication projects, including design, fabrication, installation, and final verification, • Support Maintenance removing, replacing, and installing hydraulic, water, and process pumps across manufacturing equipment including performing mechanical alignment and verification following pump installation, • Follow all Lockout/Tagout (LOTO), electrical safety, and mechanical safety procedures, • Support Kaizen and continuous improvement initiatives through fabrication and mechanical modifications, • Collaborate with Maintenance, Engineering, and Operations teams to improve equipment reliability and safety, • Keep organized records, documents, drawings, information of assigned projects/tasks, • Maintain a clean, organized, and safe fabrication and work area. · High school diploma or GED Experience: · Minimum of 5 years of industrial welding and fabrication experience · Demonstrated experience performing structural welding in an industrial or manufacturing environment · Proven experience with mechanical work including pump replacement and equipment installation Certificates, Licenses, Registrations: · Current Structural Welding Certification Computer Skills: · Basic proficiency in Microsoft Word and Excel · Ability to use email, electronic documentation, and basic digital applications for work orders and project documentation Mathematical Abilities: · Intermediate-advanced math skills. · Ability to perform measurements, calculations, and layout work required for fabrication · Ability to interpret dimensions, tolerances, and specifications Analytical or Reasoning Abilities: · Strong analytical, planning skills and critical thinking ability required with orientation for continuous improvement. · Ability to effectively prepare technical documentation such as sketches/drawings, materials, procedures, etc. of assigned projects. · Ability to understand and follow written technical procedures/instructions · Strong problem-solving and mechanical reasoning skills · Ability to independently design solutions for fabrication and mechanical challenges Communication Skills: (Writing, Foreign Language, Reasoning) · Ability to read, write and speak English · Highly effective, articulate communication skills (verbal & written) with strong interpersonal effectiveness and the ability to work with all levels in the organization and across cultures · Bilingual English Spanish preferred Other Skills (Technical, or Other special knowledge and abilities) · Ability to effectively organize and prioritize work. · Strong attention to detail and ability to effectively manage a variety of projects and tasks. · Takes initiative, approaches others in a positive and constructive manner, and works well independently to achieve results · Willingness to learn, adapt, and rotate across multiple operations.

Job Description Roof Penetration Housing (RPH) is a dynamic, rapidly expanding leader in the commercial building products industry, trusted by architects, engineers, contractors, and building owners on a wide range of critical projects—from hospitals and data centers to K-12 schools. Our innovative, engineered solutions prevent roof and wall leaks and ensure storm shelters and safe rooms meet code requirements and protect occupants during severe weather events. Year to date, RPH has successfully doubled revenue year over year, with momentum showing no signs of slowing. We're experiencing rapid expansion across both our New Jersey and Texas locations, and we're excited to grow our powerhouse team as we continue setting new benchmarks for performance, safety, and success in commercial construction. About the Role To keep up with our growth, we are seeking a Take Off and Design Associate who will work closely with our Technical Solutions Manager to develop take-offs, conceptual designs, initial estimates, and final quotes for large custom projects. This role is a full time, salaried role that directly reports to the General Manager. This role will be in-office where day-to-day work will occur in the Texas office. This role will require up to 15% travel requirements, fully paid by the company, to various locations depending on business needs. About You You think like a builder and thrive in a technical, detail-oriented environment. You take pride in producing accurate designs and estimates that set projects up for success. You're highly organized, track progress meticulously, and hold yourself to the highest standards of quality and precision. Collaboration comes naturally; you communicate clearly across teams, work closely with customers, and know when to lead or support. You're proactive and adaptable. Above all, you care deeply about delivering exceptional work that meets both technical and business goals. Essential Functions Take-offs, Concept Design, and Estimating. • Develop take-offs, conceptual designs, initial estimates, and final quotes for large custom projects., • Work closely with the customer to understand project needs and reflect those in the design and estimate., • Work with procurement team and suppliers to understand project costs and lead times., • Track project from initial concept through bid phase to final purchase., • Create timely and accurate submittal drawings using CAD software., • Maintain organized records of take-off data and project metrics., • Support overall company needs related to new product development, marketing, product improvements, regulatory compliance, quality control, and product testing and certifications., • Develop architectural drawings showing installed product., • Support marketing and business development initiatives with drawings and technical information., • Assist in providing technical answers to customer inquiries., • Produce other drawings as needed., • Participate and provide input as a member of the Product Team., • Experience in design engineering, commercial estimating, and field construction management in a relevant commercial building products business (commercial roofing, HVAC, plumbing, electrical or mechanical)., • Extensive experience with sheet metal fabrication and equipment., • Proficient in AutoCAD required, SolidWorks preferred., • Proficiency in Revit a plus., • Ability to read and interpret architectural, structural, and MEP drawings., • Demonstrated ability to effectively manage projects including custom sheet metal., • Excellent verbal, written, and digital communication skills., • The starting compensation range for this position is $85,000 – 120,000 USD and will be determined based upon a candidate's experience and location., • The typical working hours for this position are 8 am – 4:30 pm CST., • This job position is exempt to overtime as determined by the FLSA standards., • Employer covered premiums for Medical, Dental, and Vision Insurance – 100% covered for employees, so you can focus on your health without the extra cost., • 401(k) Retirement Plan & Employer Contribution - RPH contributes a fixed percentage of your pay automatically alongside your contributions to invest in your long term success., • Paid Time Off & Holidays – Enjoy a healthy work-life balance with generous PTO and paid holidays.

Molex is seeking a dynamic and proactive Field Application Engineer (FAE) to lead, promote, and resolve all technical and engineering related barriers in designing Molex connectors, cables, and solutions into AMD Austin locations. Bachelor's Degree in Mechanical Engineering, Electrical, Computer Sci

Job DescriptionDescription: Lonestar Electric Supply and its subsidiaries are looking for an Intern who will work with a dynamic team of individuals across various departments to provide support and valuable resources while also learning more about the Electrical Distribution Industry. The ideal candidate will be a college student majoring in Industrial Distribution, Industrial Engineering, Electrical Engineering, or a related degree. We’re looking for someone who is hungry to learn, ready to work and looking to make a big impact in a short period of time. They will also drive and promote our passion to MAKE IT HAPPEN! Responsibilities • Shadow associates throughout the organization to learn how we perform job duties and interact with partners and customers at every level of the business., • Provide excellent customer service to our internal and external partners, customers, logistics professionals, vendors as well as vendor partners and employees., • Learn best practices to close sales and achieve monthly quotas., • Research accounts, identify key players and support associates in making contact and generating interest., • Receive, verify, and stock various products utilized in the electrical industry., • Review orders, pull requested items from shelves, examine for accuracy, and wrap for transport., • Provide loading and unloading support as needed., • Follow processes and procedures as instructed by your Lead, Mentor or Supervisor., • Help maintain a clean and organized working environment., • Follow established safety guidelines and proper protocols., • Proactive communication to management regarding issues and concerns., • High-School Diploma or GED., • Currently enrolled in a bachelor’s degree program majoring in Industrial Distribution, Industrial Engineering, Electrical Engineering, General Engineering, Business Administration, or a similar field of study., • Desire to build a career in Sales, Construction, Engineering or Electrical Distribution industry., • Self-starter with strong work ethic and a desire to learn and advance., • May be required to move up to 40 lbs., • Could be tasked with working around moving mechanical parts and in warehouse conditions that are not always climate controlled and may include, heat and humidity., • Noise level may be loud at times., • Must be able to remain in a stationary position 50% of the time., • Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer. This job description is a general outline of the day-to-day duties to be expected and may not cover all job responsibilities that may be assigned by management. This job posting will remain up throughout the year. Applications will be reviewed November through December, with screening calls and interviews taking place in January. Please contact with any further questions. Requirements:

Job DescriptionEControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers’ risk and clear a path to their success. We immerse ourselves in our customers’ world, reveal unknowns and deliver integrated solutions. We are looking for a hands-on Safety Engineer to help drive safety efforts across our multiple facilities. Key Job Elements • Ensures the availability, readiness and proper use of required accident prevention procedures, safety and fire prevention equipment, protective clothing/devices, and first aid supplies, • Recommends and follows up to verify the implementation of corrective actions regarding safety, • Manage and support the Lockout/Tagout (LOTO) program, including project coordination, procedure development, and compliance oversight to protect employees working on energized equipment., • Maintains records on safety inspections and inventory of safety & fire equipment and devices, • Oversees the storage, use, and recording of all hazardous materials, • Maintains and audits SDS, • Follows procedures to monitor health and safety at designated locations such as ergonomics, air quality, and waste disposal, • Lead and support machine guarding projects, including hazard identification, solution coordination, and verification of compliance with safety standards, • Knows, applies, and documents state, OSHA General Industry, and federal regulations in order to identify problems and find solutions, • Manage safe work procedures and trains personnel, • Develops and disseminates manuals and documentation around health and safety, • Plan, organize, and lead quarterly safety meetings to review performance, communicate expectations, address trends, • Conduct and maintain Job Safety Analysis to identify task specific hazards and define and define safe work practices for operational roles.Requirements, • Bachelor’s degree in Mechanical Engineering & 2 – 5 years of experience, preferably in an industrial setting, • Strong understanding of OSHA General Industry standards, • Identifies complex issues and is solution based, elevating as necessary, • Provides leadership, coaching, and/or mentoring to a subordinate group, • Ability to travel between sites in the San Antonio area, • Familiarity with lithium battery safety, handling, and risk mitigation practices preferred, • Understanding of safety considerations in metal fabrication environments preferred, • Knowledge of overhead crane operations and related safety standards preferred, • Flexibility to work outside of regular business hours based on company needs Powered by JazzHR VHBdrESH9J

Job Description SUMMARY Seeking a Lead Engineer in the San Antonio, TX area! The Lead Engineer will serve as a technical lead for the design and execution of custom and standardized industrial control panel enclosures and engineered mechanical systems. This role is highly hands-on and plays a critical part in ensuring products meet UL standards, customer specifications, and internal quality requirements, while supporting cross-functional teams across engineering, project management, manufacturing, and quality. Join a high-growth manufacturer driving innovation in Power Distribution Modules, Generator Enclosures, and Electrical Houses (E-Houses). This leadership role is ideal for a seasoned Mechanical Engineer ready to take full ownership of the design and execution of custom, high-voltage systems that power mission-critical infrastructure globally. You will step into a high-impact role at a company redefining how the power infrastructure is built and delivered. Competitive base, relocation support, and the opportunity to lead in a company on the rise. Apply here to learn more! RESPONSIBILITIES • Lead mechanical design of industrial control panel enclosures, skids, cabinets, and integrated mechanical assemblies., • Maintain and improve internal engineering standards and best practices., • Partner with Project Managers, Electrical Engineering, Sales, and Manufacturing to deliver projects on schedule and within scope., • Mentor junior engineers and designers through technical guidance and design reviews., • Identify opportunities to improve design efficiency, standardization, and manufacturability., • Contribute to continuous improvement initiatives across engineering and production., • Lead and oversee the design of custom generator enclosures and integrated power distribution systems., • Structural & HVAC Integration: Collaborate across disciplines to ensure structural and cooling systems are optimized for durability, safety, and efficiency., • Material & Component Strategy: Specify materials and components to align geographic and environmental considerations., • Documentation & Compliance: Produce detailed design packages including drawings, bill of materials, and technical documentation; ensure adherence to regulatory and quality standards., • Client Collaboration: Serve as a primary technical interface with clients throughout the lifecycle of each project., • Project Management: Drive engineering schedules and coordinate cross-functional teams to meet milestones., • Bachelor's degree in mechanical engineering, • Minimum 8 years of experience in mechanical engineering, with at least 5 years collaborating with mission critical custom enclosures., • Expertise in mechanical design within commercial or industrial construction settings, • Professional Engineer (PE) license highly preferred, • Proficiency in Revit, AutoCAD (3D), and related engineering design tools, • Strong leadership, communication, and problem-solving skills

Job DescriptionSalary: This role is fully in office at our San Antonio, TX based headquarters. Plus One Robotics is a dynamic startup developing cutting-edge robotic solutions for logistics and e-commerce applications. We aim to revolutionize automation with high-performance systems that integrate hardware and software seamlessly. Role Overview As Sr. Controls/Electrical Engineer you will be responsible for the design and development of robotic controls and electronics for our InductOne and related systems. You will also be responsible for programming (PLCs) and configuring controls (drivers, sensors, etc) in order to meet performance and quality requirements. You work with a small team (4-6 people) of talented electrical and mechanical engineers. You will drive technical architecture by collaborating with mechanical and software engineers. Key Responsibilities: Technical Execution & Product Development • Support the implementation of best practices for electrical/controls change management., • Draft industrial electrical schematics and panel layouts under the guidance of more senior engineers/group leader., • Select and specify industrial components for electrical design, • Troubleshoot Program PLCs (or similar) for machine control, • Assist in the evaluation and implementation of control system machine safety, • Coordinate with software development teams to understand and implement hardware-software interfaces., • Provide technical support for requests from operations and field teams., • Provide accurate time estimates for assigned individual tasks., • Proactively report task status, technical hurdles, and progress to the group lead. Qualifications • A minimum of 2 years of experience in electrical engineering, controls, robotics, automation, or hardware product development., • Bachelors in Engineering, Electrical, or a related field., • Foundational knowledge of robotic systems and industrial automation., • Experience with I/O networks, • Experience with machine control using PLCs, • Experience with AutoCAD Electrical, SolidWorks, or similar tools, • Experience with engineering change management and/or product life cycle management tools., • Strong background in software/hardware integration and product development processes. Work Environment & Travel • This position operates in a professional office setting with occasional exposure to robotic systems and moving mechanical parts., • The noise level in the work environment and job sites may at times be loud., • 20%-30% travel in for the purposes of customer support, first article inspections, site acceptance testing, sales support, conference participation, etc. Although rare, some travel may be last minute. Position Type/Expected Hours of Work Full time, 40 hours/week between M-F, 9:00am-6:00pm. Benefits Depending on level of experience, this role starts at $90,000 per year and is a bonus eligible position. Plus One Robotics offers a wide range of employee benefits for our full-time positions including healthcare benefits, a flexible paid time off plan, professional development opportunities, and a paid parental leave program. We are not able to provide visa sponsorship for this position.

Job Description This position requires access to export-controlled information. Therefore, only U.S. persons (U.S. citizens, and lawful permanent residents) will be considered. At Cox Manufacturing, we combine precision machining excellence with a mission to serve others. Our vision is to deliver top-tier small part production services, support a high quality of life for our employees, and be a positive influence for Christ, guided by Colossians 1:10. We’re not perfect, but we’re committed to walking with purpose and integrity. Our core values: Teamwork, Continuous Improvement, Perseverance, and Excellence drive everything we do. If you’re looking for meaningful work in a company that values purpose, we invite you to join our team. We are seeking a detail-oriented and proactive Process Engineer to join our team, bringing a strong focus on critical thinking, and continuous improvement. In this role, you will be a key contributor to optimizing our manufacturing processes and supporting production success. Responsibilities: • Analyze and interpret blueprints to efficiently plan and execute job operations, • Select appropriate tooling with a strategic focus on maximizing tool life and performance on high running jobs, • Create precise, efficient CNC programs using advanced CAD/CAM Software, • Provide troubleshooting support to resolve production issues and ensure minimal downtime., • Apply critical thinking and root-cause analysis to improve machining processes and drive continuous improvement, • 5 years of experience in machining process development, project management and CNC programming, • Ability to demonstrate knowledge and application of machine tool products, options and functions, • Strong mechanical and technical aptitude Benefits: Our employees at Cox Manufacturing enjoy top tier benets designed to support their physical, nancial, and emotional wellbeing. These benefits include comprehensive medical, dental, and vision plans, a 401(k) plan, pension, life insurance, paid time off with holidays, and various wellness programs. Additionally, we offer career path planning and continuing education to help employee achieve their professional goals. Powered by ExactHire:184206

Job Description The Application Engineer acts as a key technical liaison between customers, the sales team, and engineering, ensuring generator systems are properly specified and integrated to meet project requirements. This role is instrumental in influencing project specifications by providing accurate technical information and serving as a trusted resource for the consulting engineering community throughout the territory to promote Caterpillar equipment standards. Essential Responsibilities: • Collaborate with sales teams and customers to define technical requirements and recommend customized generator solutions, • Interpret specifications, load requirements, and site conditions to select and size generator systems, including auxiliary components, • Develop technical documentation, including drawings and submittals, to support proposals and project execution, • Coordinate with internal teams (engineering, production, and service) to ensure correct configuration and successful project delivery, • Provide technical expertise and application support to the sales team and customers, including onsite presentations and consultations, • Assist with troubleshooting and resolving complex integration and application issues, • Stay informed on relevant codes and standards (e.g., NFPA, NEC), as well as emerging technologies in power generation, • Support special projects as assigned by the EP Sales Manager, • Adhere to all safety policies and procedures; maintain compliance with company standards, • Perform other duties as assigned Qualifications & Skills: • Deep understanding of power generation principles and application engineering best practices, • Proficiency in sizing and specifying generator systems, including ATS, switchgear, and control systems, • Strong working knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Access), • Familiarity with federal, state, and local regulations, including emissions and fire protection standards, • Excellent business acumen, with a high level of accuracy and attention to detail, • Knowledge of HOLT CAT Commercial Engine Sales operations and Dealer Business System (DBS) is a plus, • Strong communication and interpersonal skills, including technical writing and presentations, • Proven critical thinking and problem-solving abilities, • Strong organizational skills and the ability to manage multiple projects simultaneously under tight deadlines, • Ability to provide value-driven consultation and influence technical project specifications, • Resilient under pressure, with a professional and collaborative demeanor, • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field, • 2+ years of experience in an application, systems, or sales engineering role—preferably within power generation or related industries None Travel: • Travel up to 45%, and some overnight travel may be required, • This position involves extended periods in a stationary position; additionally, occasional movement inside the office to access office machinery, file cabinets, etc., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines Work Environment: • This job is generally performed in a professional office environment, • Occasionally works outdoors and may be exposed to weather extremes conditions that include inclement weather, heat, cold, and humidity Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT

Job Description This position requires access to export-controlled information. Therefore, only U.S. persons (U.S. citizens, and lawful permanent residents) will be considered. At Cox Manufacturing, we combine precision machining excellence with a mission to serve others. Our vision is to deliver top-tier small part production services, support a high quality of life for our employees, and be a positive influence for Christ, guided by Colossians 1:10. We’re not perfect, but we’re committed to walking with purpose and integrity. Our core values: Teamwork, Continuous Improvement, Perseverance, and Excellence drive everything we do. If you’re looking for meaningful work in a company that values purpose, we invite you to join our team. We are seeking a skilled Automation/Controls Technician to support, maintain, and enhance automation systems within our machining manufacturing environment. This role is responsible for troubleshooting, optimizing, and improving PLC, HMI, CNC control systems, and Industry 4.0 technologies. The ideal candidate is a hands-on problem solver with strong electrical and automation experience who thrives in a fast-paced, highprecision production environment. Key Responsibilities: • Design, develop, and maintain PLC (Programmable Logic Controller) programs for CNC machinery and the Industry 4.0 system., • Integrate and troubleshoot Human-Machine Interface (HMI) systems to improve operator usability and efficiency., • Perform electrical control system troubleshooting, diagnostics, and repairs to minimize downtime., • Collaborate with cross-functional teams including maintenance, production, and IT to enhance system performance., • Maintain and update electrical schematics, wiring diagrams, and documentation., • Assist in the installation and commissioning of new automation equipment., • Lead or support continuous improvement initiatives focused on automation and controls., • Train maintenance and production teams on PLC/HMI systems for troubleshooting and basic operation., • Assist engineering and plant staff with the specification, installation, and modification of automated systems. Maintain awareness and communicate how changes to automation and controls affect the CNC machinery and/ or process., • Communicate status of projects or impediments, manage expectations and articulate timelines, quickly resolve issues, and ensure consistent functionality of automation systems and controls., • Provide ongoing troubleshooting and maintenance support for automated systems and work directly with machine operators and production supervisors to resolve mechanical issues that arise during production., • 5 years of experience in electrical and industrial automation is required (manufacturing preferred)., • Experience working with PLCs, industrial electricity, automation control, and variable frequency/servo drive systems., • Familiarity with plant specific automation products such as Allen-Bradley (ControlLogix, CompactLogix, FactoryTalk View, Studio 5000) and/ or Siemens (Step 5/7, WinCC, TIA Portal) PLCs, HMIs, drives, and software., • Basic knowledge of FANUC CNC controls and hardware., • Strong communication skills with the ability to explain automation concepts to technicians, operators, and leads., • Strong problem-solving skills and ability to work independently or within a team., • Flexible work schedule to support production needs., • Working with electrical systems up to 480 VAC, 3 phase., • Experience with Studio 5000, TIA Portal, or similar PLC programming environments., • Familiarity with SCADA systems, IIoT technologies, or Industry 4.0 platforms., • Ability to read and update ladder logic, function block, and structured text programs., • Knowledge of industrial networking (EtherNet/IP, Profinet, etc.), • Prior machining or high-precision manufacturing environment experience. Compensation: We ensure regularly assess market data to establish salary ranges. The salary for this role is based on experience and starts at $28/hour. Benets: Our employees enjoy top tier benets designed to support their physical, nancial, and emotional wellbeing. These benets include comprehensive medical, dental, and vision plans, a 401(k) plan, life insurance, paid time off with holidays, and various wellness programs. Additionally, we offer career path planning and continuing education to help employees achieve their professional goals. Powered by ExactHire:192656

Job Description Description Support project by executing chemical and petroleum lab scale experiments. Buildup of the test equipment, Compile and report test data. Mechanical Aptitude is a must. Work with engineer to generate mass balances, data compilations. Perform sample collection. Training will be provided by chemist or lead engineer. Perform equipment maintenance/troubleshooting. Candidate needs to be able to take apart equipment and rebuild as changes will be made to pilot plant. Be able to read drawings- AutoCAD. Maintains, troubleshoots, and repairs instrumentation, mechanical and electrical equipment including, but is not limited to the process demonstration unit, pumps, and other auxiliary equipment. Assists in the safe start-up, operation, and shutdown of plant equipment from outside the control room. Visually inspects and listens to equipment at periodic intervals to detect malfunctions or need for repair, adjustment, or lubrication. Monitor plant air and water emissions from outside the control room. Will be helping with operations of plant- SCADA software - Training will be provided from lead engineer on shift. Skills Engineering, mechanical, pressure, chemical, petroleum, excel, tubing, pumps, schematics Top Skills Details Engineering, mechanical, pressure, chemical, petroleum, excel, tubing, pumps, schematics Additional Skills & Qualifications High School Diploma. Experience with MS Office. Knowledge of tubing and pipe-fittings, understand basic fluid flow and gas flow and pressure. Knowledge of Word, excel for reporting. Mechanical Aptitude is a must. Must be willing to work overtime and shift work Instrumentation and board operations experience is preferred Experience Level Intermediate Level Job Type & Location This is a Contract position based out of San Antonio, TX. Pay and Benefits The pay range for this position is $22.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Antonio,TX. Application Deadline This position is anticipated to close on Mar 24, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionEControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers’ risk and clear a path to their success. We immerse ourselves in our customers’ world, reveal unknowns and deliver integrated solutions. We have a global footprint ready to serve customers with high-level product support and deep application engineering. The company employs over 700 employees worldwide dedicated to serving our customers and markets on virtually every continent. Responsibilities Develop and support LabView based software for control of dynamometer facility and associated test equipment. Provide engineering analysis for development of new test equipment which may include fluid and heat transfer components. Assist with emissions measurement equipment including emissions benches and dilution tunnels. Interact externally with both customers and suppliers on technical topics. Education & Experience • Minimum of five (5) years of relevant experience, • Bachelor’s degree in Mechanical Engineering or related fieldRequirements, • Must have experience in the LabView programming environment., • Preferred to have experience in dynamometer test facility operation., • Preferred to have strong understanding of emission certification procedures and equipment requirements especially to meet Federal 1065 testing requirements., • Must demonstrate ability to work multiple concurrent projects., • Excellent oral and written communication skills p7RrJ3nwRy