Mechanical engineering jobs in Buffalo, New YorkCreate job alerts

Job DescriptionThe Production Associate supports daily manufacturing operations by maintaining clean, safe, and efficient work areas while ensuring product quality and consistency. This role plays a key part in keeping production running smoothly, supporting multiple departments, and upholding MacLean-Fogg’s strong commitment to safety, teamwork, and operational excellence.Job Details • Position Type: Full-Time, Hourly (Non-Exempt) • Pay Range: $18.33/ per hour (shift differential) • Work Location: Onsite - Buffalo, New York 1420Key Responsibilities • Maintain a clean, safe, and organized workspace following 6S and safety standards. • Report unsafe or unusual conditions to supervision promptly. • Complete documentation and communicate effectively across shifts and departments (quality, engineering, maintenance). • Follow all Quality Management System (QMS) procedures and work instructions. • Handle chip and swarf management, including exchanging carts and operating chip spinners. • Collect and segregate scrap, bar ends, filter bags, and oily materials for proper disposal or recycling. • Drain, clean, and refill machines, washers, and dip tanks as needed. • Assist with property maintenance, cleanup, and general labor tasks both inside and outside the facility. • Inspect parts visually and dimensionally using basic gauges and inspection tools. • Perform 100% inspection of parts for defects and maintain accurate inspection records. • Hand load, pack, deburr, and assemble parts using basic tools and equipment.Skills/Competencies • Strong attention to detail and commitment to quality • Ability to follow detailed work instructions and safety procedures • Effective communication across teams and shifts • Dependable and self-motivated with a strong work ethic • Basic mechanical aptitude and familiarity with production tools and gauges • Ability to work independently and as part of a teamQualifications (Required) • High school diploma or equivalent • Experience in a manufacturing, industrial, or production environment • Basic understanding of workplace safety and housekeeping practices • Ability to lift up to 50 lbs and stand for extended periods • Willingness to perform a variety of physical and hands-on tasksQualifications (Preferred) • Prior experience in machining, inspection, or materials handling • Familiarity with 6S, lean manufacturing, or continuous improvement practices • Knowledge of basic inspection tools (calipers, micrometers, gauges)About MacLean-FoggAt MacLean-Fogg, you’ll be part of a global manufacturing leader with a 100-year legacy of innovation and excellence. We partner with some of the world’s most iconic brands to create high-quality fasteners, components, and engineered solutions for industries that shape the future. With the addition of Mallard Manufacturing, we’ve expanded into industry-leading gravity flow solutions for material handling. Here, your ideas and skills will make an impact—driving cutting-edge solutions, advancing sustainability, and helping build a better tomorrow. Join a collaborative team where your contributions matter and your career can thrive.Why Join MacLean-Fogg?At MacLean-Fogg, we are committed to supporting our employees with a comprehensive benefits package designed to foster growth, well-being, and financial security: • Competitive Pay & Rewards: Your hard work matters—earn competitive wages with recognition for your contributions. • Health & Wellness Coverage: Comprehensive medical, dental, and vision plans, with 100% coverage for preventative care. • On-Demand Pay with PayActiv: Access your earned wages when you need them—no waiting for payday. • Future Financial Security: 401(k) with company match and profit-sharing to build long-term financial stability. • Support for Families: Paid parental leave for all parents during life’s biggest milestones. • Smart Savings Options: Health Savings Accounts (HSA) and Flexible Spending Accounts (FSA) to manage healthcare costs. • Extra Wellness Perks: Tuition reimbursement, wellness equipment rebates, and free professional therapy sessions through Spring Health. • Life & Accident Insurance: Protection for you and peace of mind for your loved ones. • Disability Coverage: Income protection when the unexpected happens. • Exclusive Vehicle Discounts: Save on new vehicles from leading manufacturers. • Work-Life Balance Benefits: Flexible benefits tailored to your personal and family needs. • Holiday Appreciation: Receive turkeys and hams to enjoy with your family during the holidays. • Career Growth & Learning: Free access to LinkedIn Learning plus our Leadership Development Program to sharpen your skills and accelerate your career.Diversity & Inclusion at MacLean-FoggVarious agencies of the United States Government require employers to maintain information on applicants pertaining to factors such as race, sex, and type of position for which an individual applies. The information requested is voluntary and is for compliance with certain record-keeping requirements. MacLean-Fogg is dedicated to fostering an inclusive and diverse workplace. We actively promote equal opportunity for all applicants, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected characteristics. Discover more about your Equal Employment Opportunity rights as an applicant. If you require a reasonable accommodation to participate in our hiring process, please contact .#ZRCompany DescriptionAt MacLean-Fogg, you’ll be part of a global manufacturing leader with a 100-year legacy of innovation and excellence. We partner with some of the world’s most iconic brands to create high-quality fasteners, components, and engineered solutions for industries that shape the future. With the recent addition of Mallard Manufacturing, we’ve expanded into industry-leading gravity flow solutions for material handling. Here, your ideas and skills will make an impact—driving cutting-edge solutions, advancing sustainability, and helping build a better tomorrow. Join a collaborative team where your contributions matter and your career can thrive.At MacLean-Fogg, you’ll be part of a global manufacturing leader with a 100-year legacy of innovation and excellence. We partner with some of the world’s most iconic brands to create high-quality fasteners, components, and engineered solutions for industries that shape the future. With the recent addition of Mallard Manufacturing, we’ve expanded into industry-leading gravity flow solutions for material handling. Here, your ideas and skills will make an impact—driving cutting-edge solutions, advancing sustainability, and helping build a better tomorrow. Join a collaborative team where your contributions matter and your career can thrive.

Job DescriptionResponsibilities: • Check for completeness, • Verification against contractual requirements, • Proof of functionality by either a conventional function test or simulation, • Final inspection of equipment and components, • Conducts quality control inspections of in-process and pre-shipment products at local facilities., • Inspection duties include, but are not limited to: visual (workmanship) evaluation, functional testing as applicable (measurements, assembly, etc.), packaging & labeling verification, etc., • Provides timely, detailed reports and photographic evidence of product, packaging, labeling, defects noted, etc.Technical & Industry Experience:, • 5 years of Mechanical Quality Engineer experience, • Mechanical engineering degree, • Experience with Visual/Dimensional/Welding inspection., • Knowledgeable on Metrology, know how to handle Calipers / Micrometers., • Experience with Factory Acceptance Test (FAT) in industrial equipment, machinery, components, products and materials., • Experience as a quality inspector, or applicable manufacturing experience in specified industries (CQE preferred), • Experience with ANSI Z1.4 sample size determination and AQLs (training available), • Ability to lift at least 20lbs as necessary, • Must be able to use MS Word and Excel to submit documents and reports within the time specified (usually within 24 hours after job completion), • Ability to work well in independent and group problem-solving situations, • Ability to maintain a positive, professional disposition when adapting to occasional disruptions and unexpected events, • Flexibility in scheduling Job Type: 1099 Contractor Project Duration: • Note: This is a 1099 contract role project duration may vary based on client needsShift Hours: shift time may fluctuate., • Note: As a 1099 contractor, project schedules may vary depending on site availabilityLocation:, • Must be able to travel to Buffalo, NY and nearby areas

Job DescriptionAre you an experienced Mechanical Integrity Inspector looking to take the next step in your career? Join our West Seneca team and become part of a stable, supportive work environment where your expertise is valued—and where long-term careers are the norm, not the exception. You’ll work alongside a close-knit group of Mechanical Integrity (MI) professionals with over 100 years of combined experience. The MI Team is proud to have one of the most experienced and longest-tenured teams in the company—and we’re looking for someone who’s ready to grow with us. Responsibilities: • Perform field inspection and testing services for fixed equipment which may include, but not limited to API-510 Pressure Vessels, API-570 Process Piping and API-653 / STI SP001 Storage Tanks, • Perform non-destructive examinations using company-certified methods., • Utilize software (UltraPipe, Excel) and governing standards to assess the fitness for service and remaining life of inspected equipment., • Produce accurate isometric drawings of piping and equipment using AutoCAD., • Communicate with customers regarding project setup, schedule, equipment needs, and inspection results., • Locate, read, and understand the federal, state, and local requirements governing the equipment being evaluated., • Read and interpret Process and Instrumentation Drawings (P&ID)., • Use appropriate personal protective equipment (PPE), including respirators, and follow health and safety practices., • Perform routine maintenance on designated test equipment, such as ultrasonic equipment and air monitors.Qualifications:, • Over 5 years of experience in Mechanical Integrity Inspection, Nondestructive Examination (NDE), or a closely related field, • High school diploma required; an Associate's or Bachelor’s degree in engineering or a related technical discipline is preferred, • At least one of the following certifications is required (more are preferred): API 510, API 570, and/or API 653; Level II qualification in MT, PT, UT, UTT, or ET, AWS Certified Welding Inspector (CWI) certification, • Proficient in AutoCAD, Microsoft Word, and Excel, • Valid driver's license with the ability to operate a motor vehicle for field testing and inspections, • Willingness and ability to travel locally and nationally on a regular basis, • Ability to pass a drug screening and vision test Join Us! At Encorus, we value innovation, collaboration, and professional development. We offer a competitive benefits package, opportunities for career advancement, and paid training. If you’re ready to take your career to the next level and make a significant impact, we want to hear from you! Visit our careers page at to learn more and to apply. Powered by JazzHR hktUfKF2xP

Job Description Technical Source is looking to hire a Test Technician for our client who specializes in manufacturing aseptic processing equipment for the Life Sciences industry in Buffalo, NY. The qualified candidate will have experience in mechanical and electrical testing of automated equipment Responsibilities of a Test Technician include: • Perform mechanical and electrical testing on systems and equipment, • Calibrate instruments and equipment required for testing procedures, • 3+ years' experience in electrical and mechanical system testing and troubleshooting, • $60,000- $73,000 based on experience and fit, • Competitive pay with bonus and employee benefits including 100% healthcare coverage for employee and family

Job Description The Welding Engineer provides technical leadership in support of manufacturing operations specifically in welding and brazing, assembly, and manufacturing environment. This position has a strong focus in welding and manufacturing engineering in day-to-day operations and project-based support based on customer needs. As a Welding Engineer, you will support daily welding operations by applying your technical engineering skillset to analyze process efficiency, troubleshoot defects, perform quality control functions, and drive cost savings. In this role, you will evaluate, apply, and develop complex welding specifications per industry standards and as per customer requirements. You will also be responsible for developing robust and repeatable joining procedures for high-precision components using different welding technologies, such as Gas Tungsten Arc Welding (GTAW), Laser Beam Welding (LBW), and Brazing. You will also develop and maintain weld qualification reports, weld procedure specifications, and work instructions as needed. To be successful in this position you should be able to clearly communicate technical details and provide training to operations teammates and customers as needed. If you have strong analysis and communication skills, are resourceful, creative, and take initiative, and have a bachelor's degree in welding, metallurgical, materials science, mechanical or mechanical/chemical engineering from an ABET-accredited program or applicable technical work experience, then we are interested in hearing from you. We are ideally looking for someone with a minimum of three (3) years of relevant experience performing welding engineering or similar metal product processing.

Job DescriptionCompany Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The Welder/Fabricator at GTI will receive their daily tasks and responsibilities from their working lead. Tasks will be centered around the assembly of materials to create a finished product in accordance with Customer specifications. The individual will be responsible for always maintaining a safe work environment, as well as reading blueprints and schematics for product design. Daily Responsibilities: • Work detail drawings fit-up piece parts in fixturing fit, tack and weld piece parts according to detail drawings with components consisting of steel channels, brackets, angles, sheathing, assemblies and sub-assemblies., • Tack welds all parts together in equipment, ensuring all dimensions are correct to specified drawings., • Weld complete assembly according to specified welding standards., • Correct fabrication mistakes., • Incorporate approved design changes where necessary., • Fabricate shop fixtures as required by assembly personnel per engineering sketch., • Meet production schedule, quality and planned labor hours with limited supervision., • Utilization of hand and power shop tools., • Understand and apply minimally these forms of welding, carbon steel, stainless steel, low alloy., • Normally receives basic instructions on routine tasks and detailed instructions on new assignments., • Read blueprints and drawings and take or read measurements to plan layout and procedures., • Determine the appropriate welding equipment or method based on requirements., • Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)., • Operate angle grinders to prepare the parts that must be welded., • Align components using calipers, rulers etc. and clamp pieces., • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)., • Repair machinery and other components by welding pieces and filling gaps, • Test and inspect welded surfaces and structure to discover flaws., • Maintain equipment in a condition that does not compromise safety.Requirements:, • Proven experience as welder., • Experience using a variety of welding equipment and procedures (TIG, MMA etc.)., • Experience in using electrical or manual tools (saws, squares, calipers etc.)., • Ability to read and interpret technical documents and drawings., • Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)., • Deftness and attention to detail.Additional Qualifications:, • General mechanical background., • Ability to use hand tools and welding tools safely., • Minimum of 1 year experience in mechanical assembly, AWS certification (American Welding Society) for welding of carbon steel using GMAW process position 3G, Vertical up and 4F overhead., • Able to work with limited supervision and follow instructions., • Able to work as a team member in group situations., • Fully understand manufacturing drawings, able to verify dimensions., • Understand tolerance systems., • Complete shop order documentation and time sheets., • Meet internal Company standards for quality and workmanship, • Expected to contribute and maintain conditions that will ensure a healthy and safe working environment., • Working knowledge of torch and plasma equipment., • Working knowledge of GTAW Welding., • Ability to apply workmanship standards and understand and carry out instructions furnished in written, oral or diagram form., • Able to perform basic tasks independently, limited supervision and in a group setting.GTI Fabrication is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Test Technician Location: Tonawanda, NY Salary: $60,000 – $73,000/year Job Summary: We are seeking a skilled Test Technician to support machine testing activities and ensure equipment meets the highest quality standards. In this role, you will work closely with the Test Supervisor, guide junior technicians, and perform both mechanical and electrical testing on complex systems. You will also troubleshoot issues, calibrate instruments, and maintain accurate testing documentation in compliance with ISO 9000 requirements. Responsibilities: • Assist the Test Supervisor during machine testing and troubleshooting., • Guide and mentor junior test technicians in proper procedures., • Perform mechanical and electrical testing on equipment and systems., • Calibrate instruments and testing equipment., • Record and maintain test data; support ISO 9000 documentation., • Diagnose and repair faulty components, test failures, and software malfunctions., • Verify that all nameplates, safety labels, and documentation are correctly applied., • Ensure readiness of equipment for shipment., • Support Project Managers during customer visits and operational training., • Complete testing procedures in accordance with defined quality requirements., • Associate degree in electrical or mechanical engineering with 3–5 years of experience, or 5–10 years of hands-on technical experience., • Experience with electrical systems, controls, and software troubleshooting., • Strong communication and interpersonal skills to work effectively with customers and shop personnel., • Excellent organizational skills and attention to detail., • Familiarity with ISO 9000 standards and documentation processes., • Experience providing customer training or demonstrations., • Background in refrigeration systems., • Experience with validation and testing procedures for complex industrial equipment., • Interest in improving product quality and optimizing testing processes.

Job Description Join our team as a Test Technician and bring your mechanical and electrical skills to the next level! Location: Tonawanda, NY Pay Rate: $60K-$73K(Based on experience) - Up to $85K for engineering graduates Position Type: Full-Time, Permanent This role is primarily based in our on-site testing facility; however, it requires up to 25% travel. Typically, this includes weekly visits to customer installation sites to support equipment testing, troubleshooting, and commissioning. Travel is planned and coordinated in advance to ensure minimal disruption to in-shop responsibilities. What You’ll Do: • Provide support to the Test Supervisor during machine testing activities, • Guide junior test technicians in procedures and troubleshooting, • Perform mechanical and electrical testing on systems and equipment, • Calibrate instruments and equipment required for testing procedures, • Record, document, and maintain test data; support ISO 9000 documentation as needed, • Identify and correct faulty components and test failures, • Detect and resolve software-related malfunctions, • Contribute to the continuous improvement of equipment quality, • Verify that nameplates, safety labels, and documentation are correctly applied, and that the equipment is ready for shipment, • Support the Project Manager during customer visits and operational training sessions, • Ensure that all testing procedures are completed in accordance with defined quality requirements, • Associate degree in electrical or mechanical engineering with 3–5 years of relevant experience, or 5–10 years of hands-on technical experience, • Experience with electrical systems, controls, and software troubleshooting, • Strong communication skills and ability to work effectively with customers and shop personnel, • Excellent organizational skills and the ability to communicate clearly, both verbally and in writing, • Familiarity with ISO 9000 standards and documentation processes, • Experience supporting customer-facing training or demonstrations, • Experience with refrigeration systems, • Experience with validation and testing procedures for complex industrial equipment ABOUT US: PrideNow is Pride Global's light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with the overarching mission of Pride Global, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. As part of the Pride Global family, we bring forth a commitment to excellence and a comprehensive approach to meeting the unique staffing needs of our clients worldwide. Welcome to PrideNow, where our local expertise seamlessly integrates into the global excellence of Pride Global, shaping a future of dynamic workforce solutions. BENEFITS DISCLOSURE: Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - offer eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.

Job DescriptionTest Technician Title: Test Technician Location: Tonawanda, NY Position Overview We are seeking a skilled Test Technician to join our team. The primary objective of this role is to ensure the quality and functionality of our industrial equipment through rigorous testing and evaluation. The successful candidate will be responsible for the commissioning, installation, and maintenance of various systems while providing technical support and troubleshooting assistance. Key Responsibilities • Conduct tests on industrial equipment to ensure compliance with specifications and performance standards., • Assist in the commissioning and installation of new equipment and systems., • Perform routine maintenance and troubleshooting on existing equipment to ensure optimal performance., • Read and interpret mechanical and electrical drawings to understand system layouts and functions., • Document test results and generate reports for review by engineering and management teams., • Proven experience as a Test Technician or similar role in an industrial setting., • Strong knowledge of industrial equipment commissioning, installation, and maintenance., • Familiarity with PC and PLC systems and their applications in testing environments., • Ability to read and interpret mechanical and electrical drawings accurately., • Excellent problem-solving skills and attention to detail. -Incredible health benefits -Bonus -Overtime -PTO package • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 09/23/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Test Technician The Test Technician supports machine testing activities under the direction of the Test Supervisor. This role includes mentoring junior technicians, performing mechanical and electrical tests, calibrating instruments, troubleshooting hardware and software issues, and documenting results in compliance with ISO 9000 standards. The technician ensures equipment meets all quality, safety, and documentation requirements prior to shipment, contributes to continuous improvement efforts, and assists Project Managers with customer visits and training sessions. Skills & Experience • Associate degree in Electrical or Mechanical Engineering with 3–5 years of relevant experience, or 5–10 years of hands-on technical experience., • Proficiency in electrical systems, controls, and software troubleshooting., • Strong communication and organizational skills; effective with both customers and shop personnel., • Ability to work independently with minimal supervision., • Willingness to travel 10–20%, including occasional international travel., • Familiarity with ISO 9000 standards and documentation., • Experience supporting customer training and demonstrations., • Background in refrigeration systems preferred., • Knowledge of validation and testing for complex industrial equipment., • Commitment to product quality and process improvement. It is the policy of GCR to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. GCR is an Equal Opportunity/Affirmative Action Employer and embraces diversity in our employee population.Company DescriptionGCR is a national technical recruiting firm. We specialize in contract, contract to hire, and permanent staffing solutions across a variety of industries including, Information Technology, Commercial, Automotive, Semiconductor, Medical Device, Pharmaceutical, Manufacturing, and Defense.GCR is a national technical recruiting firm. We specialize in contract, contract to hire, and permanent staffing solutions across a variety of industries including, Information Technology, Commercial, Automotive, Semiconductor, Medical Device, Pharmaceutical, Manufacturing, and Defense.

Job Descriptionseeking a patent attorney or agent with 2-6 years of experience for the firm’s Rochester or Buffalo office (REMOTE) This Jobot Job is hosted by: Monica Feltz Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $120,000 - $165,000 per year A bit about us: Mid-sized 100+ year old full service law firm with offices throughout NY state, servicing local, regional, and national clients with top legal advise and respect. Why join us? • HYBRID schedule, • Promotes work-life balance, and a team-oriented culture predicated on mutual respect, • Billables: 1800, Min bonus + discretionary on performance/billables, • Sophisticated work, with smaller firm feel Job Details Seeking a patent attorney or agent with 2-6 years of relevant experience for the firm’s Rochester or Buffalo office. The ideal candidate will have two to six years of patent prosecution experience and a background in optics, physics, mechanical engineering, electrical engineering, or aerospace engineering. Qualified candidates must have excellent analytical, writing, communication, and client service skills. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

Job Description Job purpose The Director of Facilities & Construction will be a strategic leader responsible for the planning, operation, and maintenance of all facilities and infrastructure assets. This role oversees the design, building, renovation, and upkeep of all properties, ensuring safety, compliance, and operational efficiency. The position requires deep knowledge of facilities engineering, construction management, sustainability practices, and vendor relations to support both day-to-day operations and long-term capital improvement strategies. Duties and responsibilities • Oversee all building systems, including HVAC, electrical, plumbing, structural, and fire/life safety systems., • Ensure preventative and predictive maintenance schedules are followed to maximize asset lifespan., • Manage custodial, landscaping, snow removal, and other essential services., • Lead planning, design, budgeting, permitting, and execution of construction, renovation, and tenant improvement projects., • Partner with architects, engineers, contractors, and internal stakeholders to ensure on-time, on-budget delivery., • Oversee bid processes, negotiate contracts, and manage change orders., • Maintain full compliance with OSHA, ADA, NFPA, environmental, and local building codes., • Oversee workplace safety programs, emergency preparedness, and incident reporting., • Ensure all vendor and contractor work adheres to company safety standards., • Develop and manage annual facilities and capital budgets., • Track expenses, analyze cost drivers, and recommend efficiency improvements., • Negotiate vendor agreements for maintenance, construction, and specialized services., • Implement energy management and sustainability initiatives to reduce environmental footprint and operating costs., • Create multi-year facilities master plans aligned with business growth and operational needs., • Maintain accurate records, drawings, and maintenance logs for all assets. Qualifications • Bachelor’s degree in Facilities Management, Engineering, Construction Management, or related field., • Certified Facility Manager (CFM), LEED AP, PMP, or similar credentials strongly preferred., • HVAC, Electrical, or Plumbing certification a plus., • 8+ years in facilities management, construction, or engineering leadership roles., • Proven track record delivering multi-million-dollar construction or renovation projects., • Experience managing distributed facilities in manufacturing, logistics, or commercial sectors., • Strong understanding of mechanical, electrical, and structural systems., • Proficiency with CMMS (Computerized Maintenance Management Systems)., • Familiarity with sustainability standards, building automation systems, and energy efficiency strategies., • Exceptional organizational, budgeting, and vendor management skills., • Strong communication and stakeholder management abilities., • Demonstrated ability to lead cross-functional teams and manage competing priorities. Safety Requirements • Must be able to work in both an office and warehouse environment, • Ability to travel within the Buffalo area as needed, • Follow all GMPs (Good Manufacturing Practices) Physical requirements • Must be able to lift up to 50lbs, • Must have transportation to move between sites in the greater Buffalo area Direct reports Facilities Supervisor Assistant Property Coordinator M-F

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, large commercial, residential and other unique projects. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Perform complex design calculations for analysis and design of new and existing structural systems., • Prepare documents and reports from concept design through advanced technical design documentation., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $65,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor of Science degree in Civil or Structural Engineering is required. Coursework in building systems engineering required., • Master of Science degree in Structural Engineering is preferred., • 3 years minimum experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required., • E.I.T. accreditation preferred., • Excellent verbal and written communication skills. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Company Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The QC Technician is responsible for the inspection and testing of materials and finished products at various stages of the manufacturing process to ensure they comply with all applicable laws, industry codes & standards, as well as Company and Customer specifications/standards. This is a 2nd shift position with a standard schedule of Monday-Friday, 3:30pm-12:00am Job Responsibilities: • Develop and maintain inspection reports., • Ensure compliance with federal and state laws, as well as company standards and specifications., • Maintain calibration of quality control equipment., • Perform inspections across all stages of production., • Prepare and maintain test data for review., • Evaluate data and draft reports, noting any relevant deviations from existing standards., • Identify areas for quality control improvement and implement new methods accordingly., • Communicate quality or compliance concerns with urgency., • High school diploma or general education degree (GED) required., • Solid understanding of measuring, inspection and test equipment., • Minimum of 2-5 years of inspection and/or production experience in the metals fabrication industry., • Visual weld and welding inspection experience., • Proficiency with Microsoft Office programs, specifically Excel., • Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions., • Ability to lift and/or move up to 50 pounds occasionally., • Specific vision abilities required include close vision, color vision, and the ability to adjust focus. (minimum required visual acuity - 20/20 corrected or uncorrected), • Demonstrated ability to work independently with minimal supervision., • Excellent organizational skills., • Demonstrated ability to analyze and interpret information., • Associate or bachelor’s Degree in a related field., • AWS Certified Welding Inspector - CWI. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The ideal candidate will be responsible for providing engineered drawings for HVAC control systems. You should be able to review specifications and contract drawings for assigned projects. Provide accurate drawings for HVAC control systems and schematics using AutoCAD. Have the ability to size control valves, dampers, air flow stations, and the like for HVAC systems. Experience designing systems with typical DDC control lines such as: Schneider Electric, Tridium, or similar. Be able to write and understand the sequence of operations for HVAC control systems, along with assembling submittals and O&Ms for projects. Additionally, the ideal candidate will possess the ability and willingness to mentor and guide junior design engineers, supporting their growth and development within the team. What are we looking for • Associate degree in Mechanical Engineering/Mechanical Engineering Technology/Electrical Engineering/Computer Engineering or other STEM field with 3-5 years' experience in relevant field., • 4+ years' experience in controls design engineering OR 8+ years as a controls technician., • Sound knowledge of electrical circuits, HVAC, sensors and signal types, and controls required., • Familiarity with common control sequences including ASHRAE Guideline 36P., • Demonstrated capability drafting control drawings in Visio, AutoCAD, or equivalent., • Advanced computer skills and proficiency in MS Office Suite required., • Bachelors degree in Mechanical Engineering/Mechanical Engineering Technology/Electrical Engineering/Computer Engineering or other STEM field with 2-4 years' experience in relevant field., • Experience designing control systems using Schneider Electric EcoStruxure and SpaceLogic. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Job description This candidate must have the ability to understand mechanical concepts and processes easily, as well as be proficient with the use of equipment and tools to diagnose and repair equipment. This candidate will also be helping create Bills of Materials (BOM's) and Routings for our new ERP system Education/Experience: • Bachelor of Science in Engineering or related background, • 1-2 years of industrial experience as a engineer is preferred but we will accept new graduates, • Proficient with a 3D modeling software, prefer SolidWorks experience, • Work with a team of engineers and other personnel to develop and maintain mechanical and robotic systems to improve the manufacturing process in our industrial manufacturing plant., • Propose and implement cost-reduction and runtime improvements., • Support production team with troubleshooting and repair of production equipment., • Design/produce effective solutions for needed fixtures and tools., • Participate in training of operators on new machinery and control systems., • Propose new technologies and machinery to improve manufacturing abilities and efficiency., • Provide production and sales support as needed., • Knowledge of PLC’s, automation, or robotics is a plus., • Knowledge of lean manufacturing, cell concept, and value stream mapping also a plus., • Welding experience is a plus, • Must possess excellent communication skills., • Must have the ability to write routine correspondence and to speak effectively to employees and customers., • Must have the ability to deal effectively and interact well with the customers and employees., • Must be able to lift up to fifty (50) pounds., • Must be able to bend, squat, and stretch (Repetitive motion), • Must be able to climb ladder and work in high areas, • Must be fit tested for respirator use This position comes with a competitive pay structure with bonus program and an excellent benefits package which includes Company sponsored healthcare, dental, Company paid Life and Accidental death insurance, paid vacation, and 401(k) plan. Company DescriptionUnicell is a creative, resourceful manufacturer with a strong commitment to employees and customers. Innovative and flexible, we have created a culture of success that’s shared by every individual. We are a multi-cultural/multilingual company that embraces diversity and inclusion from the assembly floor to the executive branch With headquarters in Toronto, Canada and Buffalo, New York, we also have locations in Rochester and Albany to complete projects for our local and national customers. Our major products are truck bodies, and we build an almost unlimited number of custom variations to these basic products. We are also a supplier of truck equipment manufactured by other top companies.Unicell is a creative, resourceful manufacturer with a strong commitment to employees and customers. \n\nInnovative and flexible, we have created a culture of success that’s shared by every individual. We are a multi-cultural/multilingual company that embraces diversity and inclusion from the assembly floor to the executive branch\n\nWith headquarters in Toronto, Canada and Buffalo, New York, we also have locations in Rochester and Albany to complete projects for our local and national customers. Our major products are truck bodies, and we build an almost unlimited number of custom variations to these basic products. We are also a supplier of truck equipment manufactured by other top companies.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy & Commissioning team. LaBella’s Energy & Commissioning team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • Ensure compliance with applicable codes, standards, and utility requirements Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Company Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The QC Technician is responsible for the inspection and testing of materials and finished products at various stages of the manufacturing process to ensure they comply with all applicable laws, industry codes & standards, as well as Company and Customer specifications/standards. Job Responsibilities: • Develop and maintain inspection reports., • Ensure compliance with federal and state laws, as well as company standards and specifications., • Maintain calibration of quality control equipment., • Perform inspections across all stages of production., • Prepare and maintain test data for review., • Evaluate data and draft reports, noting any relevant deviations from existing standards., • Identify areas for quality control improvement and implement new methods accordingly., • Communicate quality or compliance concerns with urgency., • High school diploma or general education degree (GED) required., • Solid understanding of measuring, inspection and test equipment., • Minimum of 2-5 years of inspection and/or production experience in the metals fabrication industry., • Visual weld and welding inspection experience., • Proficiency with Microsoft Office programs, specifically Excel., • Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions., • Ability to lift and/or move up to 50 pounds occasionally., • Specific vision abilities required include close vision, color vision, and the ability to adjust focus. (minimum required visual acuity - 20/20 corrected or uncorrected), • Demonstrated ability to work independently with minimal supervision., • Excellent organizational skills., • Demonstrated ability to analyze and interpret information., • Associate or bachelor’s Degree in a related field., • AWS Certified Welding Inspector - CWI. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Are you passionate about building engineering systems? Do you feel like you’ve hit a plateau or just have a desire to advance your career? We are seeking a Mechanical (HVAC, plumbing and/or fire protection) Designer with a strong focus and background in Building Projects to work in our Buffalo, NY office. This position will work closely with engineering staff to develop designs, drawings, specifications, and reports for buildings from conception to construction. Individual must be able to work independently, as well as part of multi-discipline teams producing electrical engineering documents that detail designs for the built environment. Labella’s architects and engineers are passionate about problem solving, affecting change to address local and regional issues, protecting natural resources, and planning for the future. Requirements Responsibilities: The ideal candidate will be self-motivated with an eagerness to learn new skills. Some of the duties the candidate may be involved in include: • Work with other engineers as part of a Project Team to develop concepts, strategies, designs, drawings, specifications, and reports., • Prepare design drawings using Revit and AutoCAD., • Laying out and sizing of ductwork, HVAC piping, plumbing piping and fire protection systems., • Performing load calculations., • Sizing of equipment., • Coordinating design with other trades., • Perform field investigations to document existing conditions., • Must maintain a positive work atmosphere by behaving and communicating in a professional manner with co-workers, staff, project managers, other disciplines, and all other employees., • Expected to improve current knowledge of technologies and trends, as they apply to the applicable project and market types, and continually strengthens skills. Qualifications: • A passion for building systems, and a desire to become a respected expert on production systems and drawing standards., • Associates Degree in Computer Aided Drafting/Design, Engineering Technology, or related field desired but not required., • A certificate or degree in AutoCAD, Revit, or related field is a plus., • Proficiency in Revit and/or AutoCAD is required., • Minimum 5 years in building system designs., • Building system design experience focused on HVAC ductwork and piping distribution, plumbing piping, and fire protection systems is a plus., • Familiarity with HVAC load calculation programs (Carrier HAP or Trane Trace) is a plus., • Strong writing, organizational and communications skills., • This career requires an attention to detail; the details matter!, • Ability to work on several projects simultaneously. Salary Range: $75,000 - $105,000 annually. The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description About the Role: The Mechanical position at our Tonawanda location within the Facilities Managment industry is focused on ensuring the optimal performance and reliability of mechanical systems and components. This role involves diagnosing, maintaining, and repairing mechanical equipment to support production and operational efficiency. The successful candidate will collaborate closely with engineering and production teams to troubleshoot issues and implement effective solutions. A key outcome of this role is to minimize downtime and enhance the longevity of mechanical assets through proactive maintenance and timely interventions. Ultimately, this position contributes to delivering high-quality products and services by maintaining the mechanical integrity of the facility's equipment. Minimum Qualifications: • High school diploma or equivalent with completion of a mechanical apprenticeship or technical training program., • Proven experience in mechanical maintenance, repair, and troubleshooting within a manufacturing or industrial environment., • Basic understanding of mechanical systems, hydraulics, pneumatics, and related tools and equipment., • Ability to read and interpret mechanical drawings, schematics, and technical manuals., • Associate degree or higher in Mechanical Engineering Technology or a related field., • Experience working in an engine manufacturing or automotive production environment., • Certification in mechanical maintenance or industrial machinery repair (e.g., Certified Maintenance & Reliability Technician)., • Familiarity with computerized maintenance management systems (CMMS) and diagnostic software., • Perform routine inspections and preventive maintenance on mechanical systems and machinery to ensure operational efficiency., • Diagnose mechanical failures and malfunctions using appropriate tools and techniques, and execute timely repairs., • Collaborate with engineering and production teams to identify root causes of mechanical issues and develop corrective actions., • Maintain accurate records of maintenance activities, repairs, and parts inventory to support operational transparency. The required skills enable the candidate to effectively perform mechanical diagnostics, maintenance, and repairs, ensuring equipment reliability and minimizing downtime. Proficiency in reading technical documents and schematics allows for accurate troubleshooting and repair planning. Strong problem-solving skills are essential for identifying root causes and implementing corrective measures efficiently. Preferred skills such as familiarity with CMMS and certifications enhance the ability to manage maintenance schedules and improve overall operational workflows. Additionally, communication and teamwork skills facilitate collaboration with cross-functional teams to support continuous improvement initiatives. 1st shift Monday - Friday 7:00am-3:0pm

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off Duties/Responsibilities: 1. Create and execute preventive maintenance schedules for equipment, systems, and infrastructure., 2. Diagnose failures in mechanical, electrical, pneumatic, and hydraulic equipment and carry out repairs promptly., 3. Collaborate closely with production and engineering teams to troubleshoot equipment problems and reduce downtime., 4. Keep detailed records, logs, and documentation of maintenance, repairs, and inspections., 5. Ensure compliance with safety standards, OSHA regulations, quality standards, and company policies during all maintenance activities., 6. Assist with installing and commissioning new equipment and machinery., 7. Source replacement parts and oversee critical spare inventory., 8. Suggest and carry out enhancements to equipment design and maintenance practices., 9. Support root cause analysis and ongoing improvement initiatives related to equipment performance., 10. Coordinate with external vendors and contractors when specialized maintenance or repairs are needed., 11. Train and mentor junior maintenance technicians as necessary. Required Skills and Abilities 1. Strong troubleshooting and analytical skills in mechanical, electrical, and control systems., 2. Familiarity with manufacturing equipment such as presses, pumps, conveyors, mixers, injection molding, or CNC machinery., 3. Ability to read and interpret mechanical drawings, schematics, and technical manuals., 4. Skilled with hand tools, diagnostic devices, and machine shop machinery., 5. Strong communication and collaboration skills., 6. Ability to prioritize tasks and effectively manage time in a fast-paced environment., 7. Experience with rubber molding preferred. Education and Experience 1. Bachelors degree in Mechanical, Electrical, or Industrial Engineering or a related technical field preferred., 2. 3 to 5 years of maintenance experience in a manufacturing environment., 3. Experience with PLCs, automation systems, and CMMS (Computerized Maintenance Management Systems) preferred. Physical Requirements 1. Ability to occasionally lift and carry up to 50 pounds., 2. Visual acuity needed for reading instructions, evaluating equipment and work areas, and spotting hazards., 3. Willingness to walk, stand, and move within a manufacturing environment for prolonged periods., 4. Ability to work in environments with different temperatures, noise levels, and exposure to equipment and machinery.

Job Description Looking for multiple skilled fitters/plumbers for a company in Buffalo, NY specializing in water filtrations and proccesing systems. 1st shift hours - 7am-3:30pm+OT Pay varies based on experience - $24-30/hr Please reply with resume for immediate consideration!! REQUIREMENTS: -Previous experience with pipe fitting or plumbing required, PVC piping preferred -Must be able to read and decipher blueprints, read a tape and do basic shop math -Must have mechanical aptitude and have a high attention to detail -Hand and power tool experience required JOB DUTIES: -Utilize blueprints and work instructions to fit and assemble complex piping components for water purification and processing systems -Use hand and power tools to cut, form and assemble systems -Perform testing and quality control documentation throughout process -Give attention to finish detail and maintain a high level of integrity and neatness to all assemblies -Communicate any issues or material problems with management -Work both individually and as a team Company DescriptionAt APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. When APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions. Our branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.At APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. \r\n\r\nWhen APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions.\r\n\r\nOur branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.

Job Description Manufacturing company in Cheektowaga specializing in parts for the transportation industry is looking for a quality technician to join their team!! 1st shift hours - 7 a.m. – 4:30 p.m. Monday – Thursday, 7 a.m. – 11 a.m. Friday Pay varies based on experience - $24-29/hr Please reply with resume for immediate consideration!! REQUIREMENTS: • Associate degree, Trade School, and/or Quality Inspection Certification (preferred), • At least two (2) years’ experience in a manufacturing environment, • Experience working with ISO 9001 or other comparable Quality Systems, • Experience with product-failure analysis and material evaluations, • Experience with using inspection equipment, like CMM, optical comparators, and hand measurement tools, • Experience in injection molding (preferred), • Experience in machining (preferred), • Electro-Mechanical equipment experience (a plus), • CAD experience (a plus), • Understanding of Manufacturing and Assembly Processes, • Read and interpret blueprints, • Ability to problem-solve, • Use various precision measuring devices, • Solid verbal and written communication skills, • Ability to work effectively with management, other associates, customers, and suppliers, • Computer proficiency in Microsoft Office Suite, • Participate in improving our products, processes, equipment, and methods by performing inspections, testing, and evaluations, • Supervise compliance to all standards and specifications including ISO-9001, DOT, FMVSS and SAE standards as well as product regulatory requirements to Calif Prop 65, Reach, GADSL, RoHS, TSCA, and Conflict Minerals Reporting, • Facilitate non-conforming material (NCMR) disposition. Contain stock; coordinate rework activity (includes training, quality alerts and visual aids). Verify conformance to customer requirements. Support Material Review Board (MRB), • Assist in handling all customer returns for warranty including failure analysis, corrective action resolution with suppliers and/or Production and final dispositions., • Facilitate correction action procedure (CAR); support interim action, root cause, corrective action, preventative action, and implementation. Perform verification, • Develop and update inspection protocols and/or functional inspections on incoming materials, assemblies, and finished goods, • Create, revise, distribute, and file manufacturing instructions, standard procedures, process specifications, forms, and visual standards; ensuring the latest revision is controlled and used, • Write Technical Product Specifications and Data charts as needed for use in marketing and customer communications, • Communicate with our domestic and foreign suppliers regarding product evaluations and quality concerns, • Perform additional tasks that may be assigned by managementCompany DescriptionAt APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. When APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions. Our branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.At APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. \r\n\r\nWhen APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions.\r\n\r\nOur branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Director- Engineering is responsible for leading all aspects of design, engineering, and project management for Renewable Natural Gas (RNG) and other skidded systems applications as the leader of Engineering managers and Project Engineers. This individual will manage the entire Engineering team by providing constant feedback, leadership, mentoring, and communication of Company goals. A key success factor will be the proven ability to develop, implement, and continuously improve Engineering processes and procedures. What are we looking for: • Bachelor's degree in mechanical or electrical engineering or related discipline required. Master's in engineering or MBA preferred., • 5+ years of experience supervising Engineers; demonstrated strength in project management required., • Experience with low volume high value add engineered to order skid fabrication., • Experience with pump skids or other high flow fluid engineered skids., • Experience with LEAN and CI (continuous improvement) activities., • Understanding of RNG equipment including advanced gas compression, rotating equipment and processing systems preferred., • Advanced computer skills and proficiency in MS Office Suite required, CAD and ERP experience a plus., • Ability to set and direct design and engineering philosophy and approach to meet customer needs., • Strong communication and customer service skills required., • Experience with ASME Pressure Vessel Code, pipe welding specifications, and certifications a plus Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Remote Crane Technician- Nationwide Traveler Position Summary: For over 150 years, Morgan has led the way in transforming the metals industry. We don’t just build world-class material handling systems—we create safer, smarter, and more efficient solutions that empower our customers and elevate our communities. Be part of a company that is driven by a passion for innovation and a commitment to sustainability. Due to continued growth, we are seeking full-time Remote Crane Technicians to join our team. This role involves assembling, installing, and maintaining Morgan’s industrial overhead cranes at customer sites across the U.S. You’ll be part of a team that ensures innovation comes standard with every order. Join us in fulfilling our vision: To challenge the possibilities of today by thinking differently. Responsibilities: • Assemble, install, wire, and commission Morgan industrial overhead cranes at customer sites nationwide., • Perform preventative maintenance and inspections on overhead cranes., • Troubleshoot and repair mechanical and electrical systems, including AC and DC electrical components., • Work in field-based environments including industrial sites and manufacturing facilities., • Safely operate at heights and heavy equipment in varying weather conditions. Education/Experience: • High school diploma or GED required., • 3–5 years of experience in crane service, maintenance, or a related field., • Welding experience is a plus., • Strong knowledge of mechanical, electrical, and hydraulic systems., • Ability to read blueprints and use metrological instruments (e.g., micrometers)., • Basic organization, communication, and problem-solving skills., • Familiarity with OSHA regulations and crane safety standards., • Valid driver’s license and clean driving record., • Ability to travel 75–90% of the time, including overnight stays., • Must pass a background check and drug screening., • Millwright work, • Iron work, • Pipefitting, • Electrical meters, • Basic machining, • Basic welding, • Basic rigging Benefits: • Guaranteed minimum of 40 hours per week, • Competitive wages based on experience, • Travel per diem and expense reimbursement, • Comprehensive benefits package including:, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • 401(K) with matching, • Paid time off, • Company-provided tools and equipment. About Morgan: For more than 150 years, Morgan Engineering has created a legacy as a world leader in material handling systems. Through the design, production and service of large-scale industrial overhead and gantry-type cranes and mill equipment, we provide the innovative technology and engineering expertise to move our clients’ businesses forward. To learn more about our company or apply for this position, visit . Disclaimer: Morgan Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Are you passionate about healthcare building engineering systems? We are seeking a Senior Electrical Engineer with a strong background in healthcare building projects to join our Buffalo, NY Office. In this role, you will collaborate with regional leaders and engineering teams to develop concepts, strategies, designs, drawings, specifications, and reports from project inception through construction. You must be able to work independently and as part of multi-discipline teams to drive successful client outcomes in the built environment. This is a unique opportunity to lead and build a team, playing a key role in shaping the future of our healthcare engineering sector. At LaBella, our architects and engineers are problem-solvers, innovators, and change-makers, committed to addressing local and regional challenges, preserving natural resources, and planning for a sustainable future. Duties may include: Project Development & Client Engagement • Scope projects and develop proposals., • Build and maintain relationships with existing and prospective clients., • Function as the lead electrical engineer on multi-discipline projects from proposal through construction., • Serve as a project manager for building engineering-led projects. Electrical Engineering & Design • Develop electrical designs including single-line diagrams, electrical room layouts, panel sizing, lighting, and building systems., • Perform load calculations for generators, transformers, switchgear, MCCs, panel boards, VFDs, feeders, and branch circuits., • Prepare electrical design drawings, specifications, and reports., • Research and present coordinated design solutions., • Conduct building condition assessments and generate reports., • Ensure compliance with national, state, and local regulations, including FGI guidelines, DOH requirements, and CON submissions. Team Collaboration & Leadership • Work closely with mechanical, civil, structural engineers, and architects., • Mentor and train junior engineers., • Delegate and oversee project tasks to ensure successful completion., • Engage with owners, contractors, permitting authorities, and industry organizations. Technical Expertise & Innovation • Serve as Engineer-of-Record and internal technical expert on assigned projects., • Maintain up-to-date knowledge of industry technologies, trends, and best practices., • Passion for healthcare building systems and recognized expertise in the field., • Bachelor’s or Associate’s degree in Electrical Engineering, Engineering Technology, or a related field., • PE license (NY or OH) strongly preferred., • Minimum 10 years of experience in an A/E consulting firm., • Expertise in power distribution, lighting, fire alarm, security systems, and telecommunications design., • Experience with AutoCAD and Revit is a plus., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis)., • Understanding of Arc-Flash Evaluation and electrical safety codes., • Strong writing, organizational, and communication skills., • Attention to detail—because in this role, every detail matters!, • Ability to manage multiple projects simultaneously. Salary Range: $125,000 - $175,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Opportunity to lead and grow a team in a respected firm., • Collaborative, mission-driven culture focused on innovation and sustainability., • Work on impactful projects that shape healthcare environments. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: Competitive Salary Based on Experience ($70,000- $80,000 per year) 1st and 2nd shift opportunities Snyder Industries, Inc., has openings for CNC Machinists. At Snyder Industries we are serious about our commitment to our employees. We are aligning ourselves to be an employer of choice among manufacturers and want to help you grow both personally and professionally. Available benefits include: Work/life balance with optional overtime Flexible schedule Double-time pay for all hours worked over 48 in a workweek 15% shift differential Quarterly Bonuses Medical ( 100% paid option available) Dental and Vision Life Insurance Paid Time Off A rewarding 401(k) program Annual work boot allowance Onsite Fitness Center Onsite Cafeteria Life Resources through our EAP Apply now to join our team of growing professionals and work for a company you’ll be proud of! An industry leader with over 50 years of experience, we specialize in providing high quality components for the heavy equipment industry utilizing our updated mills, lathes, gear and heat treating/induction machinery. If you desire a team atmosphere and want to excel, look no further! In our climate-controlled shop we offer OT instead of mandating it, making our employees and their needs a top priority to align with the realistic goals set by our customers. We set the bar high for both safety and cleanliness. Requirements: CNC Machinist Objective: Produces machined parts by setting up and operating computer numerical controlled (CNC) machines, maintaining quality, efficiency, and safety standards as well as maintaining equipment and supplies. Role & Responsibilities: Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, locations of surfaces, and machining parameters. Sets up mills and lathes by entering instructions, including zero reference points, setting tool registers, offsets, compensation and conditional switches, calculating requirements, including basic math, geometry, and trigonometry, proving part programs. Sets up mills and lathes by installing and adjusting three and four jaw chucks, tools, and attachments. Verifies settings by measuring first run parts and sample work pieces, adhering to established standards. Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations, detecting malfunctions, troubleshooting processes, replacing worn tools, and adhering to quality assurance procedures and processes. Maintains equipment by completing minor preventive maintenance requirements, notifying maintenance of issues and completing maintenance request forms. Maintains continuity between shifts by communicating job status, irregularities, and continuing needs. Completes production and quality logs as required Maintains safe operations by adhering to safety procedures and regulations. Handles miscellaneous duties as required. Education & Experience: High School diploma or equivalency Skills & Abilities: Must be able to grasp conceptual items Must be able to follow G Code Participate in process improvement Must have good communication skills Possess a good mechanical aptitude Applies tooling coordination requirements Gives attention to detail Position Type/Expected Hours of Work: Hourly M-F – 6:00am – 2:30pm (1st shift hours) M-Th- 3 pm - 11: 30 pm, F 2:30 pm - 11 pm (2nd shift hours) Optional Overtime for all shifts Equal Employment Opportunity Statement: Snyder Industries provides equal employment opportunity to all applicants and employees without regard to race, color, gender, age, disability, religion, creed, national origin, genetic predisposition, marital status, sexual orientation, victims of domestic violence, gender identity, gender expression, political belief or activity, veteran status, victims of domestic violence, familial status or any other status protected by law.

Job Description Overview Analyze, design, and optimize enterprise-wide systems and processes to improve efficiency, scalability, and integration. Engage in cross-functional collaboration to align system solutions with business objectives, ensuring sustainable and data-driven improvements. Support the mission, vision, and values of Heritage Christian Services, Inc. by driving strategic system enhancements that enable operational excellence. Pay rate for this position: $81882 / yr - $97458 / yr The salary of the finalist selected for this role will be set based on a variety of factors, including but not limited to departmental budgets, qualifications, experience, education, licenses, specialty, and training. The above range represents the organization's good faith and reasonable estimate of the range of possible compensation at the time of posting Responsibilities • Design and optimize enterprise-wide systems and processes to improve operational efficiency and scalability., • Develop system roadmaps and frameworks to align with business goals and ensure sustainability., • Analyze and refine complex workflows, integrating Lean Six Sigma methodologies to enhance performance., • Lead process reengineering efforts to eliminate inefficiencies and enhance system functionality., • Ensure seamless integration of business systems (i.e. EHR, ERP, and existing operational platforms to support strategic objectives., • Develop key performance indicators (KPIs) to measure system effectiveness and process improvements., • Partner with Business Process Analysts (BPAs) to translate operational requirements into scalable system solutions., • Partner with Data Analyst to determine key performance metrics, data trends, and analytical insights that drive process improvements and system optimizations., • Facilitate cross-functional collaboration between operations, finance, IT, and leadership to align system strategies., • Standardize documentation and governance models to support system-wide consistency and continuous improvement., • Engage in change management efforts to ensure smooth implementation of system enhancements and upgrades., • Reviews, updates and develops documentation including but not limited to: requirements, process workflows, user stories, use cases, data mapping/validations, business rules, scripts, and procedures for future reference or use. Qualifications Interpersonal Skills • Build strong relationships across teams and stakeholders., • Work seamlessly with cross-functional teams to design, analyze, and optimize business systems., • Clearly communicate complex system and process concepts in both written and verbal formats., • Analyze intricate processes, identify inefficiencies, and implement data-driven solutions., • Apply process improvement methodologies such as Lean and Six Sigma to optimize workflows., • Identify root causes of operational challenges and develop innovative solutions., • Adjust strategies and system designs to accommodate changing business needs., • Familiarity with Excel (advanced functions) and Power BI for data visualization, • Master of Science required in Mechanical, Industrial, or Systems Engineering, or Business, • Lean Six Sigma Methodologies, including DMAIC, value stream mapping, and root cause analysis., • Workflow Design and Optimization for business process efficiency. We believe that people are entitled to dignity, respect, equity and justice. We champion a society that removes barriers. We reject racism and discrimination of any kind. We protest systemic and political inequities that marginalize people, recognizing that there is a history of structural racism in the United States. We will continue to learn and change to achieve justice. We know that strength comes from unity. #IND123 #ZR

Job Description We are currently seeking Senior Gas Project Engineer(s) in a hybrid setting located somewhere in Central NY, Western NY, or Northwestern PA. The ideal candidate has at least a Bachelor’s degree in Civil or Mechanical Engineering (or other engineering field with the required experience). The successful candidate will act in a consultant role for our existing utility clients. Types of projects include (but are not limited to) main and service replacements, system improvements, pressure upgrades, new business main extensions, highway improvements, regulator station and facility design, Gate Station design, odorization, pre-heat, valve replacements, Mega Rule compliance activities, cathodic protection design, critical crossing and horizontal directional drilling design, odorization and pipe conditioning, Integrity Projects, Stress Analyses using FEM software, and more. Duties • Conduct preliminary field work which would include carrying approximately 10 lbs. throughout the work day. Expected amount of field work would be approximately 5-10% of annual work load, but may vary based on client needs and project assignments., • Coordinate with all project stakeholders and act in the interest of our clients to support their project goals., • Production of quality basemap and construction drawings for client, municipal, and regulatory agency review using AutoCAD., • Including details, BOM, Material Specifications, O&M manual development, management of inter-disciplinary projects, and more., • Development of energization and de-energization procedures., • Contractor and construction cost estimation., • Alternative Analyses and detailed comparisons including Risk Assessment, • Code and Compliance Reviews, Gap Analyses, O&M and Construction standard audits and modification., • DIMP and/or TIMP plan development and/or audits and/or improvements., • Data entry into SAP Work Management System to support your project work in our clients’ WMS’s., • Apply for and obtain municipal highway permits and other right-of-way permits (e.g. NYSDOT, railroad, Thruway Authority, Canal Corporation, etc.), • Assist with Procurement activities and evaluate bid submissions, • Participate in pre-construction and/or pre-bid meetings, site visits to meet with contractors and owners, etc., • Coordinate with landowners to obtain right-of-way / easement when required., • Create as-built records from inspector’s field notes., • Supervise, mentor, and train junior staff. Act as a role model. Set and monitor goals, objectives, and progress., • This is a Senior Level position, and you must have proven / demonstrated the ability to perform the duties of this role through previous employment., • Bachelor’s or master's degree in civil or mechanical engineering (or other closely related field)., • Minimum of 10 years of related experience for Natural Gas Operator or consultant in Natural Gas industry (Transmission and Distribution with FERC familiarity preferred), • Strong verbal and written communication skills., • Presents and conducts themselves in a professional manner., • Able to pace themselves and work within defined project budgets., • Ability to balance multiple projects and assignments and prioritize their individual workload., • Need to possess a valid driver's license with a safe driving history required., • Excellent organizational skills., • Willingness to travel to project sites in Northwestern PA, Central NY, and Western NY., • Ability to carry 10 lbs. throughout the workday sometimes through difficult terrain such as forests, agriculture fields, etc., • Preferred / Bonus Experience:, • Compressed Natural Gas, • Hydrogen transportation and/or blending., • Professional Engineering license or GTI Competent Engineer Certification Salary Range: $75,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay This role empowers you to leverage energy monitoring and optimization platforms to commission and test customized web-based energy and building equipment applications. You will monitor HVAC automation systems, analyze performance data to reduce energy waste, and optimize fault detection and diagnostics. Your expertise will be instrumental in integrating mechanical and electrical systems with our suite of data acquisition and analytical systems, spearheading R&D initiatives, and enhancing system capabilities. Responsibilities include troubleshooting Building and Power Management Systems, conducting site surveys, performing quality assurance testing, and guiding other Energy Application Engineers. What are we looking for • Bachelor's degree in mechanical engineering or aerospace engineering, • 5 + years experience in related field., • Experience with MATLAB, SQL and Python., • Advanced computer skills and proficiency in MS Office Suite required., • Travel required (0-25%), travel to internal office site, client, or training Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. Job Posted by ApplicantPro

Job Description M/E Engineering is interviewing for a Senior Mechanical Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate, or Project Manager to finalize project scope, schedule of deliverables, and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies, and follows projects through program, schematic, design development, construction document, bidding, and construction phases., • Supervises, coordinates, and reviews work., • Schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluate application of substitute equipment., • Review final adjustment of equipment and systems after installation., • Writes or contacts clients directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR ycJl4SdebM

Job Description Objective: Provide leadership and engineering support to manufacturing operations. Design tools; develop and validate processes; develop and manage product and process cost; provide technical support to sales and the outside customer; identify and manage the introduction of new technology; maintain, troubleshoot and improve existing processes; support safety, quality, delivery and cost of the entire operation. Manage the more complex technical projects from inception through completion. Mentor less experienced engineers. Minimum Requirements: • 10+ years of experience in a related technical position in a design or manufacturing environment, • Bachelor of Science in Mechanical Engineering, Industrial Engineering, or other related field, • Solid modeling experience using Solid Works, Pro E, Inventor, or equivalent, • Demonstrated experience managing all phases of more complex technical projects, • Demonstrated safety, quality, delivery and cost experience supporting manufacturing operations Job Requirements: • Strong math, reasoning and problem solving skills, • Hands on experience with solid modeling for tool and fixture design, • Working knowledge of Geometric Dimensioning and Tolerancing (GD&T), • Experience with MS Word, Excel, Outlook, PowerPoint, • Maintaining a presence at both the Buffalo, NY and Erie, PA sites, as required, by the work they are assigned, • Product cost development in support of the quoting process, • Routing development and maintenance in MRP, • Development of detailed work instructions, • Product cost development and maintenance through time studies (labor), BOM content (material) and overhead rates, • Continuous improvement of products and processes, • Cost reduction of products and processes, • Statistical analysis - Minitab experience preferred, • Lead and manage prototype builds, • Equipment/ technology design in support of operations, • Experience working within and adhering to a Quality Management System such as IATF16949 and ISO 9001, • The ability to work with people at all levels of the organization and across all functions, • Knowledge of manufacturing processes such as; tube forming, brazing, welding; milling, and turning, • Strong organizational and communication skills to include customer engagement, sales support and presentations, • Implementation of Lean Manufacturing Principles, • Management of all aspects of technical projects from inception to production qualification, • Procurement of new capital equipment to include Return on Investment (ROI) analysis, • Execution of work assignments with minimal follow-up supervision, • Mentoring of less experienced engineers Essential Duties and Responsibilities: • Execute Engineering assignments to support new product introductions and steady state manufacturing, • Provide daily technical support to operations to include problem solving, • Manage the product life cycle (design through production qualification) for all fixtures and tools, • Manage all design changes into production, • Manage/ lead the ECN process, • Technical support to quality, • Develop and manage equipment validations, • Develop training for operators for new and existing equipment, • Develop manufacturing processes that are safe, provide superior product quality, and are cost effective, • Identify and execute on cost reduction opportunities, • Identify and execute on manufacturing process improvement opportunities related to safety, quality, delivery and cost • Lead and manage prototype builds, • Technical support to sales during customer engagement for new products, quality issues, etc., • Prepare capital expenditure proposals, • Become the subject matter expert for all production equipment and technologies, • Understand and implement Lean Manufacturing principles, • Develop and maintain the plant layout to ensure operations safety, quality, delivery and cost optimization, • Develop and maintain design standards and best practices, • Technical support to sales during customer engagements to include presentations, sales calls/ visits, etc. Pay Range: $90,000-110,000. The referenced pay range represents the minimum and maximum compensation for this job. Individual annual salaries/hourly rates will be set within the job’s compensation range, and will be determined by considering factors including, but not limited to, market data, education, experience, qualifications, expertise of the individual, and internal equity considerations. Physical Requirements: While performing the duties of this job, the employee is regularly required to sit for extended periods, use hands to operate a computer and other office equipment, and communicate effectively via phone and email. The employee may occasionally be required to stand, walk, reach with hands and arms, and lift or move items weighing up to 10 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Manufacturing company in Buffalo, NY looking for a production supervisor to join their team!! 1st & 2nd shift available Pay varies based on experience, up to $85k salary Please reply with resume for immediate consideration!! JOB DUTIES: • Supervise, direct, and support production employees on the floor during assigned shift., • Oversee machine operation, change overs, material usage, and production flow., • Ensure compliance with quality standards and immediately address issues with operators and QA., • Promote and enforce all company policies and procedures, including safety, quality, attendance, and workplace conduct., • Coach, train, and mentor employees to build skills and improve performance., • Collaborate with maintenance and process technicians to resolve equipment or process issues quickly., • Complete shift reports, communicate production updates, and assist with scheduling as needed., • Drive continuous improvement in safety, productivity, and quality., • Minimum 10 years of supervisory experience in manufacturing, • Proven ability to lead and develop production teams in a hands-on environment., • Strong understanding of molding processes, mechanical systems, and production workflows., • Excellent leadership, communication, and problem-solving skills., • Comfortable being on the floor the majority of the shift., • Basic computer proficiency for reporting and communication (MS Office or similar).Company DescriptionAt APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. When APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions. Our branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.At APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. \r\n\r\nWhen APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions.\r\n\r\nOur branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionJob Title: CAD AdministratorLocation: Goodyear, AZ (On-Site) Department: Engineering Reports To: Director of Engineering Employment Type: Full-Time | ExemptAbout GTI EnergyGTI Energy, a division of GTI Fabrication, is a leader in industrial modular fabrication—serving energy, defense, and heavy industrial markets. With advanced engineering and manufacturing facilities in Arizona and New York, GTI designs and builds mission-critical modular systems, including data centers, enclosed battery systems, and energy storage devices.As we continue to expand, we are enhancing our engineering systems infrastructure to drive collaboration, efficiency, and precision across mechanical, electrical, and structural design disciplines.Position OverviewGTI Energy is seeking a skilled CAD Administrator to lead the implementation, management, and optimization of GTI’s CAD and design data systems. This individual will serve as the technical expert and process owner for SolidWorks, SolidWorks PDM, AutoCAD, Revit, and related engineering tools used across the company.The CAD Administrator will be responsible for maintaining system integrity, standardizing workflows, enforcing design standards, and ensuring all engineering teams—mechanical, electrical, and structural—operate efficiently and cohesively.This is a hands-on role requiring both strategic and tactical ownership of CAD systems, templates, and data management processes.Key ResponsibilitiesSystem Administration & Configuration • Administer and maintain GTI’s CAD environment, including SolidWorks 3DExperience, SolidWorks PDM, AutoCAD, and Revit., • Lead the migration from 3DExperience to SolidWorks PDM, overseeing configuration, data migration, and user adoption., • Manage user access, workflows, and permissions within CAD/PDM platforms to ensure compliance and data integrity., • Maintain system templates, drawing standards, and libraries for consistency across disciplines., • Support integration between CAD systems and GTI’s Dozuki work instruction software to ensure seamless flow of engineering data to the production floor.Training & Support, • Develop and deliver user training on CAD best practices, standards, and PDM workflows., • Provide first-line support for CAD-related issues, troubleshooting modeling, file management, and workflow challenges., • Coach engineers and designers on efficient modeling techniques, revision control, and system utilization.Process Development & Standardization, • Establish and enforce company-wide CAD standards for file naming, revision management, and design documentation., • Collaborate with mechanical, electrical, and structural engineering teams to align processes across product lines., • Partner with manufacturing engineering to ensure design outputs are production-ready and optimized for fabrication.Engineering Systems Leadership, • Act as GTI’s subject matter expert for CAD/PDM system selection, configuration, and continuous improvement., • Participate in defining GTI’s long-term CAD and design systems roadmap., • Evaluate and recommend tools to improve collaboration, version control, and design throughput.Cross-Functional Collaboration, • Work closely with the IT, Engineering, and Operations teams to align CAD system capabilities with business needs., • Coordinate with suppliers and external engineering partners to ensure compatibility and compliance with GTI data standards., • Support new product introduction (NPI) and design change processes through proper CAD/PDM integration.Required Qualifications, • Bachelor’s degree in Mechanical, Industrial, or Design Engineering—or equivalent experience., • 5–8 years of experience administering SolidWorks, AutoCAD, or Revit environments in a manufacturing or industrial setting., • Demonstrated expertise in SolidWorks PDM (Professional or Manage) setup, workflow design, and user management., • Strong understanding of mechanical, electrical, and structural design principles and how they integrate in complex assemblies., • Experience developing and maintaining CAD standards, templates, and libraries., • Excellent communication, documentation, and cross-functional collaboration skills., • Proven ability to train and mentor design teams across disciplines.Preferred Qualifications, • Experience leading CAD system migrations (e.g., from 3DEXPERIENCE to PDM)., • Familiarity with industrial fabrication, modular steel construction, or energy storage systems., • Exposure to PLM systems or 3DEXPERIENCE, even if not directly responsible for implementation., • Experience integrating CAD data into work instruction platforms (Dozuki or similar)., • Knowledge of lean manufacturing principles and design-for-manufacturability (DFM) practices.Why Join GTI Energy, • Shape the future of GTI’s digital engineering systems infrastructure., • Collaborate with world-class engineers across multiple disciplines., • Competitive salary, benefits, and growth opportunities., • Be part of an innovation-driven team building mission-critical modular solutions for global markets.

Job Description Are you an experienced electrical engineer looking for an opportunity to grow your skills and work on a variety of exciting building projects? We are seeking an Electrical Engineer to join our Buffalo, NY office. In this role, you will work closely with senior engineers, project managers, and multi-discipline teams to develop electrical system designs, drawings, specifications, and reports for a diverse range of buildings. You will have the opportunity to gain experience in various markets, including healthcare, commercial, education, and institutional projects. This is a growth-focused position, ideal for an engineer eager to expand their knowledge and contribute to innovative, high-quality designs. At LaBella, we are passionate about problem-solving, sustainability, and creating impactful solutions for the built environment. The ideal candidate is self-motivated, detail-oriented, and eager to develop their expertise. Your responsibilities may include: Electrical Design & Engineering: • Develop electrical designs for power distribution, lighting, fire alarm, security systems, and telecommunications., • Perform load calculations for generators, transformers, switchgear, panel boards, VFDs, feeders, and branch circuits., • Prepare design drawings, technical specifications, and engineering reports., • Research and implement industry standards and best practices., • Assist with building condition assessments and system evaluations. Collaboration & Project Support : • Work closely with mechanical, civil, and structural engineers, as well as architects., • Assist senior engineers in multi-discipline project coordination., • Communicate with clients, manufacturers, and contractors to address project challenges and develop solutions., • Participate in project meetings and contribute technical insights. Technical Growth & Development: • Stay current with industry trends, codes, and emerging technologies., • Receive mentorship from senior engineers and take on increasing project responsibilities., • Bachelor’s or associate’s degree in electrical engineering, Engineering Technology, or a related field., • EIT certification preferred; working towards or having PE licensure is a plus., • Minimum 5 years of experience in electrical engineering within an A/E consulting firm, or closely related industry., • Experience with building system design. Healthcare experience is strongly preferred., • Proficiency in AutoCAD and Revit is required., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis) is required., • Understanding of national, state, and local electrical codes., • Strong organizational, communication, and problem-solving skills., • Ability to work on multiple projects simultaneously and meet deadlines. Salary Range: $85,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Collaborative team environment with mentorship opportunities., • Exposure to a variety of building projects in different industries., • Competitive salary and hybrid work flexibility., • Support for professional development and career growth. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The ideal candidate for this role is responsible for promoting and selling high value, integrated, bundled and stand-alone systems and/or equipment and other related technology solutions under the Company's product line to contractors, consultants and customers. What are we looking for • Associate's degree in business, engineering and/or other applicable technology space required. Bachelor's degree preferred., • 1 to 5 years of related work experience preferred., • Preference to experience selling to the Electrical and/or Mechanical industry., • Knowledge of HVAC/Electrical systems, Protective Systems, A/V solutions, and systems integration is preferred., • Basic knowledge and understanding of applicable building codes and plan and spec fundamentals is essential., • Excellent interpersonal skills and emotional intelligence is essential., • Strong Computer skills including Microsoft Office Suite and SalesForce CRM is preferred., • Be highly motivated and an independent thinker., • Strong communication, presentation and customer service skills required., • Ability to adapt and be flexible in a changing environment., • Ability to multi-task, work under pressure and meet deadlines required. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionJob Title: Senior Structural EngineerLocation: Buffalo, NYHire Type: Direct HirePay Range: $120,000 – $165,000Work Model: Hybrid (with required travel to job sites and client meetings; occasional overnight Recruiter Contact: Samantha Marranca | 716-256-1271 | & Scope:Positional OverviewThe Senior Structural Engineer will play a key role in leading structural engineering projects from concept through construction. This position offers the opportunity to work on high-profile projects in a collaborative, multi-discipline architectural and engineering environment, providing technical expertise and guidance while coordinating across multiple teams and stakeholders.Role & Responsibility:Tasks That Will Lead To Your Success • Perform structural analysis, design, and computer modeling for a wide range of building and facility projects., • Coordinate with architectural, mechanical, electrical, and civil teams to deliver integrated project solutions., • Produce detailed plans, specifications, and technical reports., • Review shop drawings and conduct construction administration activities., • Lead project scope definition, planning, and execution, including projects with unique or complex technical challenges., • Act as a technical liaison internally and externally, providing independent leadership on structural matters., • Conduct facility assessments and prepare technical documentation., • Participate in client, project, and construction meetings., • Mentor and collaborate with engineers, interns, CAD technicians, and other disciplines. Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor of Science in Civil Engineering with a focus on Structural Engineering (required)., • Professional Engineer (PE) license required; Structural Engineer (SE) license preferred., • 15+ years of experience in structural engineering., • Proficiency in structural engineering software (Bentley RAM products), 3D modeling software (Revit, AutoCAD), Microsoft Excel, and BlueBeam., • Strong knowledge of structural codes and standards (ASCE 7, AISC 360, ACI 318, etc.)., • Proven design experience across a wide range of structural materials and project types., • Excellent communication, technical writing, problem-solving, and time management skills.

Job Description Electro Mechanical Engineering Manager | GTI Fabrication – Buffalo, NY | Phoenix, AZ Location: Buffalo, NY or Phoenix, AZ Full-Time | Electro Mechanical Engineering | Leadership | Competitive Salary + Benefits Company Overview GTI Fabrication is a leader in the design, engineering, and fabrication of custom modular structures, including shipping container-based solutions and ballistic metal fabrication. We serve industries such as DOD contractors, military, disaster relief, and commercial sectors, with manufacturing taking place in our state-of-the-art facility in Buffalo, NY. Our engineering team designs and builds solutions ranging from military training enclosures and live fire ranges to energy storage systems, medical facilities, expeditionary camps, and more. Position Overview We are seeking an experienced Electro Mechanical Engineering Manager to lead our electrical design team. This role will act as the subject matter expert (SME) in electrical engineering, oversee day-to-day operations of the team, and actively participate in the design, development, and testing of electrical systems for large-scale modular metal enclosures and other industrial projects. This individual will work cross-functionally with other engineering leaders and company executives, while also driving technical excellence and mentorship within the team. Key Responsibilities Electrical System Design & Development * Design, develop, and test advanced electrical systems and components * Conduct signal processing, circuit analysis, and system optimization * Perform root cause analysis and troubleshoot electrical issues Technical Leadership & Team Management * Directly oversee and mentor the electrical engineering team * Provide guidance and expertise during system design reviews and project planning * Participate in company leadership meetings to communicate project updates Cross-Functional Collaboration * Collaborate with mechanical design, software, and project management teams * Integrate electrical designs with hardware, software, and industrial systems * Interface with customers and vendors when needed for technical discussions Documentation & Compliance * Create and maintain detailed technical documentation: schematics, diagrams, and specifications * Ensure designs comply with industry standards and regulatory requirements Required Qualifications ✔ Bachelor’s Degree in Electrical or Mechanical Engineering or related field ✔ Minimum 6 years of electrical engineering experience, with at least 3 years in a management or team leadership role ✔ Expertise in CAD software for electrical design (SolidWorks Electrical or equivalent) ✔ Strong knowledge of Industrial Electrical Power Systems ✔ Proficient in signal processing, circuit design, and troubleshooting techniques ✔ Ability to lead, mentor, and develop engineering teams Preferred Qualifications ✔ Master’s Degree in Mechanical or Electrical Engineering or related field ✔ Experience with battery storage, photovoltaics (PV), and renewable energy systems ✔ Familiarity with large-scale enclosure design and modular electrical integration Why Join GTI Fabrication? ✔ Lead complex and impactful modular and industrial projects ✔ Collaborate with cross-disciplinary experts in a growing company ✔ Competitive salary and full benefits package ✔ Be a part of critical projects that support defense, energy, and emergency response industries Apply Today to take your electrical engineering leadership career to the next level at GTI Fabrication!

Job Description Role Summary CleanFiber is seeking a dedicated and dependable Engineering Project Manager to lead and execute capital and engineering projects critical to CleanFiber’s growth, from plant optimization initiatives in Buffalo to site builds in new regions. This role bridges strategy and execution, ensuring projects are delivered safely, on time, within budget, and aligned with operational and financial goals. The ideal candidate is hands-on, thrives in a startup manufacturing environment, and can balance tactical project management with strategic foresight. Position can be a remote. Essential Functions Project Management & Execution • Manage capital projects from cradle to grave, including the supervision of vendors and contractors; ensure contract deliverables are met., • Lead the development of project scopes, preliminary budgets, detailed cost estimates, equipment alignment with engineering standards and objectives., • Develop and manage detailed project plans, budgets, and timelines; proactively track risks, issues, and dependencies., • Collaborate with internal engineering and operations teams to scope technical requirements., • Ensure compliance with industry standards, codes, and regulatory requirements., • Drive standardization of systems, processes, and equipment across multiple sites., • Partner with Finance to monitor project budgets, capital spend, and ROI., • Identify cost savings, efficiency gains, and scalability opportunities., • Translate strategic growth initiatives into executable engineering roadmaps. Physical Requirements: Ability to work in a plant and office environment, with exposure to manufacturing operations. Ability to lift up to 25 lbs occasionally. Travel up to 25% required. Preferred Experience: Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, or related field). 5+ years of experience managing engineering or capital projects in a manufacturing or industrial environment. Proven ability to manage multi-million-dollar projects from design through commissioning. Strong knowledge of project management tools (Smartsheet, MS Project, or similar). Experience managing contractors, EPC firms, and vendors. Understanding of controls/automation systems (Allen-Bradley, Rockwell, etc.) preferred. Excellent communication, leadership, and stakeholder management skills. Ability to thrive in a fast-paced, high-growth environment. Why Join CleanFiber? CleanFiber makes high performance cellulose building insulation from recycled corrugated cardboard boxes, using a unique and patented process. CleanFiber’s proven technology and accelerating business is poised to disrupt a fast-growing segment of the building insulation market, while rapidly building a highly-profitable business. Cellulose insulation wins customers from fiberglass because of greater energy efficiency, and from foam because of its much lower price point. CleanFiber makes highly efficient cellulose insulation from recycled corrugated boxes, allowing us to challenge incumbent players who are reliant on diminishing supplies of recycled newsprint. With successful execution at our first facility, we believe we are well-positioned to rapidly seize market share on a national scale. We are a game changer! Equal Opportunity Employer CleanFiber Inc. is an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, color, sex, age, national origin, religion, sexual orientation, gender identity or expression, veteran status, disability status, or any other protected classification under federal, state, or local law.

Job Description We are seeking a Design Engineer to join our client’s team in Buffalo, NY. The Design Engineer will support product development activities to ensure that the desired design performance is achieved meeting the applicable customer, regulatory, and company policies. The Design Engineer will ensure a successful transfer of newly developed product to production, while supporting design concept phases through launch. This is a team oriented effort within the department and other parts of the organization for success. The salary range for this Design Engineer role is 90K - 110K. The rate may be negotiable based on experience, education, geographic location, and other factors. NO THIRD PARTIES FOR THIS ROLE PLEASE Responsibilities for this Design Engineer role in Buffalo, NY include: • Creates and revises designs (Interface, Detail, Assembly), with Designer; computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, and locations of features, • Makes final decision on drawings, checking dimension of parts, materials to be used, relation and interaction of one part to another, and relation of various parts of whole system or project., • Utilizes knowledge of various machines, engineering practices, mathematics, materials, plating, and other physical sciences to complete system design., • Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, and procedures, • Utilize prior mechanical design experience and apply on-the-job training to meet product deliverables within schedule budget constraints and to solve tasks through technical skills and analytic thinking., • Communicate with Manufacturing, Quality and Project Engineers, on changes, concerns and collaboration needs for the product, • Generate development, qualification plans (verification and validation) and compliance methods based on customer and regulatory specifications, • Prepare and present technical data to internal and external customers, • Share engineering information and promote open dialogue, • Assure proper documentation of technical data generated and the communication of results for the assigned projects and/or tasks consistent with engineering policies and procedures Qualifications for this Design Engineer role in Buffalo, NY include: Education - Required - Bachelor degree (BS) or equivalent from a four-year college or technical school - Mechanical, Aerospace Engineering Preferred – MS in Mechanical or Aerospace Engineering Experience – Required – 4-7 years related experience and/or training, or equivalent combination of education and experience in design engineering Preferred – Experience in gaseous products and safety equipment Special Knowledge/Skills – Required - • Understanding of and experience with engineering testing methods, • Ability to work both independently and as part of a team, • Able to perform simulation using Solid works or Matlab simulink and validate with performance testing, • Experience with RTCA DO-160 and/or MIL-STD-810G environmental test standards All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. *Candidates must be legally authorized to work in the United States without company sponsorship. *All applicants must be a US citizen or US Permanent Resident (i.e., Green Card Holder) If you are interested in this Design Engineer job, then please click APPLY NOW. For other opportunities available at Akkodis go to . If you have questions about the position, please contact Kevin Sindle at 574-596-2362 or Pay Details: $90,000.00 to $110,000.00 per year Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job DescriptionSalary: $24/hr $32/hr DOE The Facilities Manager of the site maintenance team, works to ensure the facility and surrounding grounds are in operational working order. Provides hands-on support for all engineering and maintenance activities including but not limited to new equipment/system installation, troubleshooting facility problems, making modifications or improvements to the facility as needed, and overall general upkeep. Technical resource for ordering and maintaining spare parts and working with contractors to ensure equipment uptime. Essential Functions: • Management of facilities contractors:, • Outside grounds, • Plumbing contractors, • Building security, • Cafeteria service, • Building mechanical systems, • Pest control management, • Assist in any facility modifications/improvements, • Builds, orders and maintains maintenance and equipment spare part inventories, • Develops RFPs for facility improvements / modifications, • Support maintenance team, • Troubleshoot building mechanical systems, • Ordering of parts, equipment and supplies for the site, • Manage facilities maintenance and cleaning crew, • Ensures completion of all facility PMs, • Oversee general state of building (Floors, walls, ceilings), • Backup other maintenance team members during vacations, sick time, and any other work absences, • General facility maintenance and upkeep miscellaneous wall patching, painting as needed Education and Experience: • High school diploma or equivalent required., • Experience in a related field preferred Knowledge, Skills and Abilities: • High school diploma or equivalent required., • Good interpersonal skills and willingness to work with others, • Good oral and written communication skills, • Good organizational skills and attention to detail, • Ability to prioritize tasks, • Ability to work effectively both as part of a team and individually, • Ability to give/receive constructive criticism, • Must be dependable/reliable/punctual, minimal unexcused absences if internal applicant Physical Requirements / Working Conditions: • Prolonged periods standing on production floor, • Prolonged periods of walking, • Must be able to lift up to 35 pounds at times, • Must be able to climb ladders, • Must be able to wear appropriate PPE (goggles, gloves, scrubs, frock/coverall, hairnet/hood, beard guard/mask) as needed based on work area and materials being handled in accordance with procedures/policies

Job Description Company Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. This position will be based out of the Phoenix, Arizona location as part of GTI Energy. As a Construction Laborer/Assembler at GTI Energy, you will be an essential part of our team responsible for building and integrating components and systems into Energy Storage Enclosures. Job Responsibilities: • Component Integration: Assemble and integrate components and systems into Energy Storage Enclosures according to provided specifications., • Mechanical and Electrical Assembly: Perform mechanical and electrical assembly tasks, ensuring precision and adherence to safety protocols., • HVAC Integration: Install HVAC systems within the enclosures to maintain optimal temperature and environmental conditions for energy storage equipment., • Blueprint Reading: Utilize your ability to read and interpret simple blueprints to ensure accurate assembly and integration., • Previous experience in assembly, mechanical assembly, electrical assembly, HVAC, and/or general construction is highly desirable., • Proficiency in using power tools and tape measures., • Strong ability to read and understand simple blueprints., • Excellent attention to detail and a commitment to safety protocols. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Objective: Provide leadership and engineering support to manufacturing operations. Design tools; develop and validate processes; develop and manage product and process cost; provide technical support to sales; maintain, troubleshoot and improve existing processes; support safety, quality, delivery, and cost of the entire operation. Manage technical projects from inception through completion. Minimum Requirements: • 3-9 years' of experience in a related technical position in a design or manufacturing environment, • Bachelor of Science in Mechanical Engineering, Industrial Engineering, or other related field, • Solid modeling experience using SolidWorks, Pro E, Inventor, or equivalent, • Demonstrated experience managing technical project Job Requirements: • Strong math, reasoning and problem solving skills, • Hands on experience with solid modeling for tool and fixture design, • Working knowledge of Geometric Dimensioning and Tolerancing (GD&T), • Experience with MS Word, Excel, Outlook, PowerPoint, • Maintaining a presence at both the Buffalo, NY and Erie, PA sites, as required, by the work they are assigned, • Process development of technical processes, • Product cost development in support of the quoting process, • Project management of small technical projects, • Routing development and maintenance in MRP, • Development of detailed work instructions, • Product cost development and maintenance through time studies (labor), BOM content (material) and overhead rates, • Continuous improvement of products and processes, • Cost reduction of projects and processes, • Statistical analysis - Minitab experience preferred, • Lead and manage prototype builds, • Equipment/technology design in support of operations, • Experience working within and adhering to a Quality Management System such as IATF16949 and ISO 9001, • Solid organizational and communication skills to include presentations and customer engagement, • The ability to work with people at all levels of the organization and across all functions, • Knowledge of manufacturing processes such as: tube forming, brazing, welding, milling and turning Essential Duties and Responsibilities: • Execute Engineering assignments to support new product introductions and steady state manufacturing, • Provide daily technical support to operations to include problem solving, • Provide technical support to quality, • Manage the product life cycle (design --> production qualification) for all fixtures and tools, • Manage all design changes into production, • Manage/lead the ECN process, • Develop and manage equipment validations, • Develop training for operators for new and existing equipment, • Develop manufacturing processes that are safe, provide superior product quality, and are cost effective, • Identify and execute on manufacturing process improvement opportunities related to safety, quality, delivery and cost • Lead and manage prototype builds, • Technical support to sales during customer engagement for new products, quality issues, etc., • Become a subject matter expert for select production equipment and technologies Pay Range: $80,000-100,000. The referenced pay range represents the minimum and maximum compensation for this job. Individual annual salaries/hourly rates will be set within the job’s compensation range, and will be determined by considering factors including, but not limited to, market data, education, experience, qualifications, expertise of the individual, and internal equity considerations. Physical Requirements: While performing the duties of this job, the employee is regularly required to sit for extended periods, use hands to operate a computer and other office equipment, and communicate effectively via phone and email. The employee may occasionally be required to stand, walk, reach with hands and arms, and lift or move items weighing up to 10 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Buffalo, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description M/E Engineering is currently interviewing for a Mechanical Project Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR 92VIfhZaA1

Job Description Title: Facilities Engineer Reports to: Director of Procurement Direct Reports: Facilities Team Position Summary: The Facilities Engineer is responsible for the design, maintenance, and continuous improvement of building systems, infrastructure, and equipment across all company facilities. This role ensures compliance with safety, environmental, and operational standards while optimizing energy use, reliability, and cost-effectiveness. The Facilities Engineer collaborates with cross-functional teams to manage capital projects, troubleshoot facility-related issues, and support strategic planning for site development and expansion. This position shall drive the vendor management life-cycle, which includes competitive bids, awards, purchasing, total cost of ownership analysis & fostering relationships for long-term stability. Essential Responsibilities: • Lead facilities staff, which includes management of daily activities and work prioritization, • Ensure facilities are compliant with health, safety, environmental, and regulatory standards., • Monitor and maintain building systems (HVAC, electrical, plumbing, lighting, security, etc.) across Modern’s campuses., • Manage preventative maintenance programs and troubleshoot system failures., • Plan & manage seasonal activities including but not limited to snow plow removal & lawn care services., • Plan, design, and implement facility infrastructure improvements, renovations, and expansions., • Oversee contractors, vendors, and consultants to ensure high-quality project execution., • Support sustainability initiatives by identifying energy efficiency opportunities., • Develop and maintain facility documentation, including blueprints, O&M manuals, and equipment logs., • Analyze system performance and prepare technical reports and recommendations., • Participate in emergency preparedness planning and response efforts., • Provide engineering support for space planning, relocations, and workplace safety enhancements., • Assists in the preparation of cost estimates for projects by conducting RFI/RFP & ROI activities., • Perform additional duties as assigned by management. Education and Experience • Bachelor’s degree in Mechanical, Electrical, Civil Engineering, or related field., • 3- 7 years of experience in facilities engineering or building systems management, • Professional Engineer (PE) license preferred by not required, • Strong technical understanding of HVAC, mechanical, electrical, plumbing, and building automation systems., • Working knowledge of building codes, OSHA standards, and environmental regulations, • Proficiency in AutoCAD, CMMS software, and Microsoft Office Suite, • Excellent problem-solving, project management, and analytical skills, • Strong interpersonal and communication abilities for cross-functional collaboration, • Work is performed in both office and field environments., • May be required to lift up to 50 lbs. and perform physical inspections in tight spaces or rooftops., • On-call support or extended hours may be required for emergencies or critical projects. Benefits at Modern: • Medical, Dental and Vision Coverage, • Retirement Savings with Employer Match, • Health Savings Accounts, • Voluntary Insurance Products, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, • Direct Deposit/Electronic Paystubs, • Discount Memberships, • Company-Sponsored Events Modern Corporation is an Equal Opportunity Employer and is committed to providing all applicants and employees the right to equal employment opportunities with regards to all aspects of the employment relationship. The Company will not engage in discriminatory practices against any applicant for employment or employee of the Company because of race, color, religion, marital status, familial status, military or veteran status, disability (including pregnancy-related conditions), creed, sex, sexual orientation, gender, gender identity or expression, transgender status, age, national origin, ancestry, domestic violence victim status, genetic predisposition or carrier status, genetic information, known relationship or association with any member of a protected class, or any other legally protected class or status.

Job Description Summary: Seeking an individual to join our Automation Engineering team. This group focuses on supporting our manufacturing plant with the latest in automated manufacturing equipment. We are looking for candidates that have a passion for solving problems and that enjoys hands on work. Qualifications: • Pursing Bachelor of Science in Electrical Engineering or related field, • Ability to develop creative solutions to difficult problems, • Mechanically inclined with strong attention to detail, • MS Office experience (Word, Excel, Outlook, PowerPoint) Responsibilities: • Creation of electrical schematics and panel layout drawings for industrial manufacturing equipment, • Wiring of electrical panels, • Selection of components such as actuators, control system hardware and sensors, • Programable Logic Controller (PLC) programming and troubleshooting, • Industrial and Co-bot Robotic programming and teaching, • Test running and troubleshooting of automated machinery, • Sensor testing and evaluation, • Light mechanical design work and solid modeling, • Assembly of systems using hand tools, • Light fabrication using power tools such as drills, grinders, saws WORKING CONDITIONS In Addition To Being Able To Sit, Stand, Climb, Walk, Read, Talk, See And Hear, To Perform The Essential Functions Of This Job An Individual Must Be Able To Do The Following Additional Activities • Perform office work requiring sitting at the computer and other administration duties., • Walking on flat or uneven surfaces., • Bending, stooping, and working from just above the ground to 6-foot elevation., • Use of stairs and ladders for elevated work., • Lifting 5 to 15 lbs. loads is performed daily., • Lifting 15 to 45 lbs. loads is done on an intermittent basis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law.