Mechanical engineering jobs in Dallas, TexasCreate job alerts

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. As a Mechatronic Technician, you will support manufacturing operations by ensuring automated machinery and integrated mechanical–electrical systems run reliably, safely, and efficiently. This role combines mechanical, electrical, pneumatic, hydraulic, and basic automation troubleshooting to keep production equipment operating at peak performance. You will perform preventive and emergency maintenance, support equipment upgrades, and partner with engineering and operations to drive improved uptime, performance, and safety across the facility. • Perform preventive maintenance and repairs on automated machinery, conveyors, robotics, and mechanical/electrical systems., • Assist in diagnosing issues involving motors, sensors, relays, pneumatics, hydraulics, and basic PLC faults., • Use diagnostic tools such as multimeters and, with training, VFD interfaces and basic PLC software., • Test equipment after repairs to confirm safe and proper operation., • Assist with PLC fault troubleshooting (Allen‑Bradley, Siemens, etc.) under guidance of senior technicians., • Calibrate sensors, encoders, and other automation components., • Support equipment startups and control system updates., • Participate in root cause analysis with coaching from senior technicians or management., • Assist with installation of new equipment, including routing wiring, mounting components, and connecting automation devices., • Support configuration of VFDs, servo drives, and control panels under supervision., • Read and understand electrical schematics, wiring diagrams, and mechanical drawings., • Maintain accurate maintenance documentation in the CMMS., • Follow all company safety policies and help maintain a clean, organized work environment., • Support operator training on basic troubleshooting and safe machine operation., • Assist with fabrication of brackets, safety guarding, and small mechanical components., • Operate forklifts, manlifts, and scissor lifts (training provided)., • Help maintain spare parts inventory., • High school diploma or GED., • Ability to use basic hand tools and measurement tools., • Basic computer skills, including CMMS and Microsoft Office., • Strong mechanical and electrical troubleshooting aptitude., • Ability to meet the physical demands of the role., • Willingness to work overtime or be on call as needed., • Technical certification in Mechatronics, Industrial Maintenance, Electrical Technology, Automation Technology, or similar field., • Experience reading ladder logic or troubleshooting PLC faults., • Experience configuring VFDs or working with servo systems., • Fabrication or machining experience., • Corporate culture based on integrity, respect, accountability and excellence, • Comprehensive training with numerous learning and development opportunities, • An attractive salary reflecting skills, competencies and potential, • A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work. #SmurfitWestrockJobs Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

ABM is seeking an experienced Electrical Distribution Commissioning Technician to join our growing Power & Technical Services team. In this role, you will be responsible for ensuring that low- and medium-voltage electrical systems are installed, tested, and commissioned safely, accurately, and in compliance with industry standards. You will play a critical role in verifying system integrity, optimizing performance, and supporting our clients through the energization and turnover process. What You Bring, Hands-on experience in electrical testing and commissioning, specifically within power distribution, protection, and control systems. • Bachelor’s degree in Electrical Engineering or Electrical Engineering Technology preferred; equivalent technical experience considered., • Demonstrated proficiency with SEL, GE, ABB, and Westinghouse protection relays, including configuration, troubleshooting, and commissioning., • Experience with relay test equipment, CT/PT test equipment, insulation resistance testers, and other standard electrical test tools., • Strong proficiency using test software such as Pro-Test, Protection Suite, or RTS, including developing automated test routines., • Experience creating and executing commissioning test plans, FAT/SAT procedures, and turnover documentation., • Solid understanding of NERC PRC-005 6, equipment maintenance standards, and best practices for work in high-voltage substations., • Ability to interpret and evaluate engineering drawings, relay settings, and electrical logic diagrams with high attention to detail., • Strong communication skills with the ability to lead field activities, coordinate with multiple stakeholders, and document test results clearly., • A proactive, problem-solving mindset with the ability to work independently in dynamic field environments. Why ABM Joining ABM means becoming part of a company committed to safety, technical excellence, and long-term customer success. We invest in our people through continual training, certification support, and opportunities to work on complex, high-profile electrical infrastructure projects. Our teams benefit from a collaborative environment where expertise is valued, innovation is encouraged, and career growth is supported at every level. With competitive compensation, excellent benefits, and a strong culture of performance and accountability, ABM provides a place where commissioning engineers can thrive and elevate their careers. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ___ | ___ About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit . ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ABM does not accept unsolicited resumes.

Overview: The Quality Inspector will report directly to the site Quality Manager, with indirect oversight from the Sr. Quality Manager, and will be charged with the vital task of conducting and documenting inspections that adhere to the approved Inspection and Test Plans (ITPs). Quality Inspectors play a crucial role in guaranteeing that all reports are meticulously documented, with accuracy and legibility that ensure traceability to their field locations, thus minimizing reporting errors. Quality Inspectors are expected to excel in communication and foster positive relationships with the owner, owner’s representative, and the Company’s site supervision, all to seamlessly advance our quality objectives. TRAVEL: Travel required up to 100%. Position requires presence directly on the Project Site location COMPANY OVERVIEW: MasTec Industrial, alongside its sister companies Casey Industrial and Phoenix Industrial, has been in operation since 1947. We serve a diverse clientele, including utilities, independent power producers, developers, and municipal utilities. Specializing in projects using natural gas, oil, biomass, and other combustible fuels, our team boasts over 30 years of expertise in the power industry. We provide EPC (Engineering, Procurement, and Construction) services and assist in project development. Our experience spans various systems for utility and industrial facilities, including simple and combined cycle plants, reciprocating engines, and waste-to-energy projects. MasTec Industrial delivers value throughout all project phases, from conceptual design to operations and maintenance. At MasTec Industrial, we are dedicated to delivering the highest quality, safety, and value in every project. We focus on attracting, developing, and retaining top talent within our organization. Our goal is to foster a respectful work environment where all employees feel valued, included, and empowered to become innovative leaders in the industry. The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In addition to our industrial market sector; In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: ESSENTIAL JOB FUNCTIONS: • Familiarity with a broad range of general construction processes and nomenclature including testing laboratory protocols and procedures, soils and concrete testing, asphalt paving, structural steel, mechanical, welding and general construction observations., • Methodical and detail-oriented to assist the project team in assuring that Project QC documentation is complete and procedures are followed to ensure issues are closed and project risk is mitigated., • Ability to read and understand construction plans and specifications including identification of errors, contradictions or redundancies for resolution by others., • Conduct regularly scheduled QA/QC meetings, review logs of Deficiencies, Punch List, and other items required and maintain documentation and meeting minutes within job folder, • Prepare reports on inspection activities, • Scheduling of inspection activities in conjunction with various local, state, governmental agencies and 3rd party testing., • Understand and be able to identify difference between Project Specifications and Standard Codes and when project specific requirements do not meet minimum codes, administer appropriate expectations of codes as necessary to protect MasTec Industrial interests., • Consult with Director of Quality when encounter issues or concerns beyond level of expertise., • Knowledge of applicable codes and standards, • Maintain a professional attitude and appearance, • Other duties as assigned, • Minimum of 1 year of experience in a QA/QC role. Education towards an engineering or technical degree may be substituted in lieu of required work experience., • Minimum of 5 years required in a construction environment., • Experience with B31.3, clean room procedures, and oxygen cleaning preferred., • Training and practical knowledge of construction trades, • Extreme proficiency in Microsoft Office applications, including Outlook, Excel, Word, SharePoint, Teams, and Power Point, • Demonstrated experience with construction management software platforms, • Proven capabilities with Bluebeam Revu, • Preferred experience with Smartsheet and InEight software KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • Write reports, business correspondence and document quality related issues and activities, • Effectively present information and respond to questions from project managers, superintendents, clients, customers and the general public, • Effectively communicate and develop positive working relationships with the owner, owner’s representative, and the Company’s site supervision, in order to facilitate the quality objectives, • Work independently and productively, ensuring the resources assigned to the project are adequate and properly trained for the task, • Be self-motivated and capable of taking initiative, • Apply critical thinking skills to establish effective corrective actions for causal factors of quality incidents, • Possess diplomatic skills for addressing Quality and Safety issues with both internal and external parties, • Excellent verbal, written and interpersonal skills., • Other may duties may be assigned PHYSICAL DEMANDS: • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions., • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks., • Stamina to perform this task repetitively and continuously for several hour intervals., • Uncontrolled environmental conditions: Constant change in weather and site conditions., • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)., • Move in and around confined, cluttered, and uneven areas., • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights., • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings., • Visualize objects in three dimensions from drawings., • Keep good balance and work at heights., • See well (either naturally or with correction)., • Hear well (either naturally or with correction.), • Coordinate the use of eyes, hands, and feet. HOURS: This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to project requirements. What's in it for you: Financial Wellbeing • Compensation $47 - $52 per hour, commensurate with experience., • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ___. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-MH1 #LI-Onsite Appcast (For Export): #appflash

Overview: The Quality Inspector will report to the site Quality Manager or Quality Field Operations Manager as applicable, and indirectly to the Sr. Manager of Quality Control, and will be responsible for conducting and documenting inspections in accordance with approved Inspection and Test Plans (ITPs). Quality Inspectors will ensure all reports are being documented accurately, legibly, and traceable to their locations in the field with minimal error in reporting. Quality Inspectors will be required to effectively communicate and develop positive working relationships with the owner, owner’s representative, and the Company’s site supervision, in order to facilitate the quality objectives. TRAVEL: Travel required up to 100%. Position requires presence directly on the Project Site location COMPANY OVERVIEW: MasTec Industrial, alongside its sister companies Casey Industrial and Phoenix Industrial, has been in operation since 1947. We serve a diverse clientele, including utilities, independent power producers, developers, and municipal utilities. Specializing in projects using natural gas, oil, biomass, and other combustible fuels, our team boasts over 30 years of expertise in the power industry. We provide EPC (Engineering, Procurement, and Construction) services and assist in project development. Our experience spans various systems for utility and industrial facilities, including simple and combined cycle plants, reciprocating engines, and waste-to-energy projects. MasTec Industrial delivers value throughout all project phases, from conceptual design to operations and maintenance. At MasTec Industrial, we are dedicated to delivering the highest quality, safety, and value in every project. We focus on attracting, developing, and retaining top talent within our organization. Our goal is to foster a respectful work environment where all employees feel valued, included, and empowered to become innovative leaders in the industry. The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In addition to our industrial market sector; In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: ESSENTIAL JOB FUNCTIONS: • Familiarity with a broad range of general construction processes and nomenclature including testing laboratory protocols and procedures, soils and concrete testing, asphalt paving, structural steel, mechanical, welding and general construction observations., • Methodical and detail-oriented to assist the project team in assuring that Project QC documentation is complete and procedures are followed to ensure issues are closed and project risk is mitigated., • Ability to read and understand construction plans and specifications including identification of errors, contradictions or redundancies for resolution by others., • Conduct regularly scheduled QA/QC meetings, review logs of Deficiencies, Punch List, and other items required and maintain documentation and meeting minutes within job folder, • Prepare reports on inspection activities, • Scheduling of inspection activities in conjunction with various local, state, governmental agencies and 3rd party testing., • Understand and be able to identify difference between Project Specifications and Standard Codes and when project specific requirements do not meet minimum codes, administer appropriate expectations of codes as necessary to protect MasTec Industrial interests., • Consult with Director of Quality when encounter issues or concerns beyond level of expertise., • Knowledge of applicable codes and standards, • Maintain a professional attitude and appearance, • Other duties as assigned, • Minimum of 1 year of experience in a QA/QC role. Education towards an engineering or technical degree may be substituted in lieu of required work experience., • Minimum of 5 years required in a construction environment., • Training and practical knowledge of construction trades, • Extreme proficiency in Microsoft Office applications, including Outlook, Excel, Word, SharePoint, Teams, and Power Point, • Demonstrated experience with construction management software platforms, • Proven capabilities with Bluebeam Revu, • Preferred experience with Smartsheet and InEight software KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • Write reports, business correspondence and document quality related issues and activities, • Effectively present information and respond to questions from project managers, superintendents, clients, customers and the general public, • Effectively communicate and develop positive working relationships with the owner, owner’s representative, and the Company’s site supervision, in order to facilitate the quality objectives, • Work independently and productively, ensuring the resources assigned to the project are adequate and properly trained for the task, • Be self-motivated and capable of taking initiative, • Apply critical thinking skills to establish effective corrective actions for causal factors of quality incidents, • Possess diplomatic skills for addressing Quality and Safety issues with both internal and external parties, • Excellent verbal, written and interpersonal skills., • Other may duties may be assigned PHYSICAL DEMANDS: • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions., • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks., • Stamina to perform this task repetitively and continuously for several hour intervals., • Uncontrolled environmental conditions: Constant change in weather and site conditions., • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)., • Move in and around confined, cluttered, and uneven areas., • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights., • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings., • Visualize objects in three dimensions from drawings., • Keep good balance and work at heights., • See well (either naturally or with correction)., • Hear well (either naturally or with correction.), • Coordinate the use of eyes, hands, and feet. HOURS: This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to project requirements. What's in it for you: Financial Wellbeing • Compensation $48 - $55 per hour, commensurate with experience., • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ___. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-MH1 #LI-Onsite Appcast (For Export): #appflash

Additional Information Job Number26049459 Job CategoryEngineering & Facilities LocationRenaissance Dallas Hotel, 2222 N Stemmons Fwy, Dallas, Texas, United States, 75207 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $21.50-$22.05 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Renaissance Hotels, we believe in helping our guests experience the DNA of the neighborhoods they are visiting. Our guests come to discover and uncover the unexpected, to dive into a new culture, or simply to make the most of a free evening. They see business travel as an adventure because they see all travel as an adventure. Where others may settle for the usual, our guests see a chance to bring home a great story. And so do we. We’re looking for fellow spontaneous explorers to join our team to bring the spirit of the neighborhood to our guests. If this sounds like you, we invite you to discover career opportunities with Renaissance Hotels. In joining Renaissance Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number26049459 Job CategoryEngineering & Facilities LocationRenaissance Dallas Hotel, 2222 N Stemmons Fwy, Dallas, Texas, United States, 75207 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $21.50-$22.05 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Renaissance Hotels, we believe in helping our guests experience the DNA of the neighborhoods they are visiting. Our guests come to discover and uncover the unexpected, to dive into a new culture, or simply to make the most of a free evening. They see business travel as an adventure because they see all travel as an adventure. Where others may settle for the usual, our guests see a chance to bring home a great story. And so do we. We’re looking for fellow spontaneous explorers to join our team to bring the spirit of the neighborhood to our guests. If this sounds like you, we invite you to discover career opportunities with Renaissance Hotels. In joining Renaissance Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number26049459 Job CategoryEngineering & Facilities LocationRenaissance Dallas Hotel, 2222 N Stemmons Fwy, Dallas, Texas, United States, 75207 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $21.50-$22.05 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Renaissance Hotels, we believe in helping our guests experience the DNA of the neighborhoods they are visiting. Our guests come to discover and uncover the unexpected, to dive into a new culture, or simply to make the most of a free evening. They see business travel as an adventure because they see all travel as an adventure. Where others may settle for the usual, our guests see a chance to bring home a great story. And so do we. We’re looking for fellow spontaneous explorers to join our team to bring the spirit of the neighborhood to our guests. If this sounds like you, we invite you to discover career opportunities with Renaissance Hotels. In joining Renaissance Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number26049459 Job CategoryEngineering & Facilities LocationRenaissance Dallas Hotel, 2222 N Stemmons Fwy, Dallas, Texas, United States, 75207 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $21.50-$22.05 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Renaissance Hotels, we believe in helping our guests experience the DNA of the neighborhoods they are visiting. Our guests come to discover and uncover the unexpected, to dive into a new culture, or simply to make the most of a free evening. They see business travel as an adventure because they see all travel as an adventure. Where others may settle for the usual, our guests see a chance to bring home a great story. And so do we. We’re looking for fellow spontaneous explorers to join our team to bring the spirit of the neighborhood to our guests. If this sounds like you, we invite you to discover career opportunities with Renaissance Hotels. In joining Renaissance Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support—helping clients maximize building performance, energy efficiency, and equipment lifespan. Key Responsibilities: * Provide direct supervision and leadership to a team of plumbers and apprentices, assigning tasks, providing guidance, and ensuring efficient workflow on job sites. * Ensure availability of plans, blueprints, materials, and tools * Coordinate with supervisors to resolve work-related issues * Accurately read and interpret complex plumbing blueprints, schematics, and specifications to ensure proper installation and adherence to project requirements. * Enforce safety and housekeeping protocols * Communicate status updates and delays to superintendents and project managers * Serve as the main point of contact for supervisors regarding team operations and issues Requirements: * Minimum 8 years of verifiable experience in the plumbing trade * Possess a valid Journeyman Plumber License in the State of Texas. * Thorough knowledge of plumbing systems, blueprints, specifications, and codes * Excellent leadership, communication (written and verbal), and interpersonal skills. * Ability to plan and schedule projects to meet deadlines * High attention to detail and commitment to quality workmanship Benefits: * Competitive salary based on experience. * Health, dental, and vision insurance. * Paid time off and holiday pay. * Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Lead Mechanic / Shop Foreman – Up to $38/hr + Monthly Bonus | Hiring ASAP Location: Dallas, TX Pay: $32–$38/hour + Monthly Bonus Potential Full-Time | Overtime Available TAKE THE LEAD. RUN THE SHOP. GET PAID WHAT YOU’RE WORTH. Barnsco Texas is looking for a hands-on Lead Mechanic who can step in, take control of the shop, and elevate the entire service operation. If you're already leading a team—or ready to step up—this is your opportunity to join a growing, stable company where your skills, leadership, and work ethic are recognized and rewarded. WHAT YOU’LL OWN • Take charge of the day-to-day operations of the service shop, • Lead and develop a team of mechanics and service technicians, • Diagnose and repair heavy equipment, diesel engines, hydraulics, and electrical systems, • Control workflow: assign jobs, hit deadlines, and keep the shop running efficiently, • Be the go-to expert for complex troubleshooting and problem solving, • Oversee preventive maintenance programs for fleet and customer equipment, • Work directly with customers on repairs, estimates, and timelines, • Ensure the shop runs safe, clean, and production-focused—no excuses WHAT YOU BRING • Proven experience as a Lead Mechanic, Shop Foreman, or Senior Technician, • Strong background in heavy equipment, diesel, construction equipment, or fleet repair, • Ability to diagnose anything—mechanical, hydraulic, or electrical, • Leadership mindset—you hold your team accountable and raise the bar, • Ability to read schematics and run advanced diagnostics, • Solid computer skills (service systems, work orders, inventory), • Bilingual (Spanish) = a strong plus WHY THIS JOB STANDS OUT • $32–$38/hour (based on experience), • Monthly bonus potential – your performance pays off, • Hands-on leadership role – no sitting behind a desk all day, • Real growth opportunity with a well-established company, • Work with a leader in construction equipment, rentals, and materials, • ⏱ Overtime available – maximize your earnings ABOUT BARNSCO TEXAS Barnsco Texas has been a trusted name in construction equipment, concrete supplies, and service since 1984. As part of Kodiak Building Partners, we offer the stability of a large organization with the culture of a local team. READY TO STEP UP? APPLY NOW. We’re hiring immediately for this role. If you’re a top mechanic who’s ready to lead, don’t wait—this position won’t stay open long. Equal Opportunity Employer Barnsco Texas is an Equal Opportunity Employer. Company DescriptionWe are a Texas-based company that offers equipment sales, rentals, and maintenance services. Additionally, we provide concrete constructions supplies, equipment sales, rental, rebar fabrication, full service post-tension, and engineering services. At Barnsco Texas, our core values are at the heart of everything we do. We provide a unique environment that encourages individual growth and recognizes individual performance and hard work. Our management team is visible and accessible, ensuring effective communication. If you are seeking growth opportunities in a stable company, look no further than Barnsco Texas.We are a Texas-based company that offers equipment sales, rentals, and maintenance services. Additionally, we provide concrete constructions supplies, equipment sales, rental, rebar fabrication, full service post-tension, and engineering services.\nAt Barnsco Texas, our core values are at the heart of everything we do. We provide a unique environment that encourages individual growth and recognizes individual performance and hard work. Our management team is visible and accessible, ensuring effective communication. If you are seeking growth opportunities in a stable company, look no further than Barnsco Texas.

Job DescriptionJob Title: Maintenance Technician Job Description The Maintenance Technician will keep production and automated equipment operating reliably in a fast-paced injection molding environment. This role focuses on troubleshooting and repairing electrical, mechanical, pneumatic, and hydraulic systems to minimize downtime and support continuous manufacturing operations. Responsibilities • Perform preventive and corrective maintenance on production and automated equipment in an injection molding environment to ensure optimal performance and minimal downtime., • Troubleshoot and repair electrical issues, including 3-phase power systems, to quickly resolve equipment malfunctions., • Diagnose and repair mechanical components, including gears, bearings, and moving assemblies, to restore proper machine function., • Maintain and service pneumatic and hydraulic systems, including identifying leaks, replacing components, and verifying proper operation., • Read and interpret blueprints and electrical schematics to accurately identify issues and implement effective repairs., • Conduct root-cause analysis on recurring equipment failures and recommend improvements to enhance reliability and efficiency., • Document maintenance activities, repairs, and parts used to maintain accurate equipment history and support future troubleshooting., • Collaborate with production staff to understand equipment performance issues and prioritize maintenance tasks in a fast-paced setting., • Support safe work practices by following all safety procedures and ensuring equipment is maintained in a safe operating condition.Essential Skills, • 1–3+ years of hands-on maintenance experience in an injection molding environment., • Proficiency in electrical troubleshooting, including working with 3-phase power systems., • Strong mechanical aptitude with experience repairing production and automated equipment., • Ability to read and interpret blueprints and electrical schematics., • Experience maintaining and troubleshooting pneumatic systems., • Experience maintaining and troubleshooting hydraulic systems., • Demonstrated ability to work effectively in a fast-paced manufacturing setting., • Strong troubleshooting skills with the ability to diagnose and resolve equipment issues efficiently.Additional Skills & Qualifications, • Previous experience as a maintenance technician in a manufacturing environment., • Comfort working with both automated and conventional production equipment., • Ability to collaborate with cross-functional teams, including production and engineering., • Strong attention to detail and commitment to equipment reliability and uptime.Why Work Here? You will join a growing manufacturing organization with strong long-term prospects and the opportunity to build your career. The company offers contract and potential contract-to-hire paths, with promotion from within and clear advancement opportunities as the operation expands. Team members enjoy quarterly cookouts that foster a friendly, collaborative culture, as well as great benefits upon becoming permanent. Multiple shifts provide flexibility for different scheduling needs, and the business is experiencing expansion with strong growth projections over the next 3–12 months. Work Environment This role operates in a fast-paced manufacturing facility with approximately 85 employees focused on injection molding production. You will work around automated and conventional production equipment and be regularly engaged with electrical, mechanical, pneumatic, and hydraulic systems. Multiple shifts are available, offering flexibility in working hours. The environment is production-oriented, with a strong emphasis on safety, teamwork, and responsiveness to equipment issues to keep operations running smoothly. Job Type & Location This is a Contract to Hire position based out of Carrollton, TX. Pay and Benefits The pay range for this position is $36.00 - $42.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionPosition: Maintenance Technician II Rate: $18 - $19/hr Location: Mesquite, TX Schedule: 6 AM - 4:30 PM Position Summary The Maintenance Technician II supports the manufacturing of consumer pressure washers, generators, and water pumps by performing equipment repairs, preventative maintenance, and new equipment installations. Key Responsibilities Responsibilities include, but are not limited to: • Troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems, including:, • Motors, drive chains, sprockets, pulleys, rollers, conveyor belts, and bearings, • Pneumatic and hydraulic components such as hoses, cylinders, solenoid valves, and pumps, • Electrical systems, including basic circuits, 3-phase power, motor controls, AC/DC drives, PLCs, and servo systems, • Diagnose electrical issues using a digital multimeter, including faulty wiring, fuses, switches, breakers, terminals, circuit boards, and photoelectric controls, • Perform electrical work such as running conduit, installing/disconnecting junction and fuse boxes, and replacing breakers, • Safely operate shop equipment, including saws, drill presses, grinders, hydraulic presses, welders, torches, and other hand tools, • Maintain equipment uptime and ensure production and facility performance metrics are met, • Assist in equipment installation and support continuous improvement initiatives, • Provide support in other operational areas as needed during staffing shortages or absencesQualifications, • Associate’s degree in Mechanical or Electronic Engineering Technology preferred, • A high school diploma with relevant work experience is considered, • Electrical Apprentice or Journeyman license preferred (not required), • 1–2 years of manufacturing maintenance experience preferred, • Strong mechanical and electrical troubleshooting skills, • Ability to work independently and stay self-motivated, • Strong organizational skills and attention to detail, • Commitment to workplace safety, • Forklift experience preferred (not required) When contacting us, please ask for the hiring team to ensure your application is directed to the right person. We look forward to hearing from you! About Trova Advisory Group Trova Advisory Group specializes in delivering a comprehensive array of staffing solutions tailored to meet the diverse needs of businesses across various sectors. Our expertise spans clerical, administrative, financial, and professional roles, offered through flexible arrangements including temporary placements, temp-to-hire options, and direct hire services. With a keen understanding of the dynamic demands of today's workforce landscape, we pride ourselves on providing top-tier talent solutions that empower organizations to thrive and succeed in a competitive market environment. Trova Advisory Group is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status. We are committed to creating a culturally diverse and inclusive workplace where individuals of all abilities are welcomed and supported. If you require a reasonable accommodation during the application or interview process, please contact us at . Include the nature of your request and your contact information, and we will be happy to assist you. Trova Advisory Group offers a comprehensive benefits package offering Medical, and Dental benefit options to all eligible employees. #zr #trova

Job DescriptionPosition: 1st Shift Maintenance Technician III Pay Rate: $21-$22/hr Location: Mesquite, TX Schedule: 6 am - 4:30 pm Position Summary The Maintenance Technician III plays a key role in supporting manufacturing operations by performing advanced diagnostics, equipment repairs, preventative maintenance, and new equipment and utility installations. This position ensures the efficient production of consumer and industrial pressure washers, hot water pressure washers, trailers, generators, and water pumps. Key Responsibilities • Perform advanced troubleshooting and repairs on mechanical, electrical, pneumatic, and hydraulic systems, • Diagnose and repair components such as motors, conveyors, bearings, chains, sprockets, pulleys, valves, pumps, hoses, and cylinders, • Troubleshoot PLCs, sensors, control circuits, and AC/DC drive systems, • Use digital multimeters to identify and resolve electrical issues, • Install and maintain electrical systems, including running conduit, replacing breakers, and working with junction and fuse boxes, • Operate shop equipment such as saws, drill presses, grinders, welders, torches, and other hand and power tools, • Maintain equipment uptime across manufacturing and facility operations, • Collaborate with Engineering on process improvements, tooling, fixturing, and ergonomics, • Support maintenance projects and assist with cross-functional operational needs, • Associate degree in Mechanical or Electronic Engineering Technology preferred (or high school diploma with relevant experience), • 5+ years of maintenance experience in a manufacturing environment preferred, • Strong knowledge of mechanical and electrical systems (120V, 240V, 480V), • Experience troubleshooting PLC systems (programming knowledge is a plus), • Welding and metal fabrication experience, • Strong analytical, troubleshooting, and problem-solving skills, • Ability to work independently and prioritize tasks effectively, • Electrical Apprentice or Journeyman license, • Previous leadership or supervisory experience, • Experience working with robotic systems, • Forklift certification or experience When contacting us, please ask for the hiring team to ensure your application is directed to the right person. We look forward to hearing from you! About Trova Advisory Group Trova Advisory Group specializes in delivering a comprehensive array of staffing solutions tailored to meet the diverse needs of businesses across various sectors. Our expertise spans clerical, administrative, financial, and professional roles, offered through flexible arrangements including temporary placements, temp-to-hire options, and direct hire services. With a keen understanding of the dynamic demands of today's workforce landscape, we pride ourselves on providing top-tier talent solutions that empower organizations to thrive and succeed in a competitive market environment. Trova Advisory Group is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status. We are committed to creating a culturally diverse and inclusive workplace where individuals of all abilities are welcomed and supported. If you require a reasonable accommodation during the application or interview process, please contact us at . Include the nature of your request and your contact information, and we will be happy to assist you. Trova Advisory Group offers a comprehensive benefits package offering Medical, and Dental benefit options to all eligible employees. #zr #trova

Job DescriptionLocation: Dallas RMX TX Job Req ID: 15487 Join our amazing team and contribute as a: Plant Maintenance Technician ABOUT THE ROLE Amrize is hiring a full-time Ready Mix Plant Maintenance Technician for the DFW and Special Projects Plants. WHAT YOU'LL ACCOMPLISH • Maintains, inspects, repairs, moves, and/or installs plant machinery and equipment in accordance with instructions, equipment manuals, etc. May perform maintenance on plant buildings as well; Assures compliance with environmental and safety regulations., • Schedules and performs preventative maintenance on plant equipment such as crushers, conveyor belts, pulleys, pumps, screens, and screen bearings by following the manufacturer's recommended service intervals and internal equipment reliability experience., • Inspection of condition and operation of plant equipment and perform necessary repairs and adjustments., • Move and install plants following engineering plans and specifications; guide less experienced mechanics., • Disassembles and repairs production equipment by replacing worn or broken parts, including bearings, rollers, motors, controls, etc., • Performs maintenance on building and other related work as assigned., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors., • Other duties as assigned. WHAT WE'RE LOOKING FOR • High school diploma or equivalent, • 2-3 years of specialized training in technical school, apprenticeship, or manufacturers' training program, • 3-4 years experience in mechanical repair, installation, and construction in a plant or industrial environment, • Must have a working knowledge of basic electrical, mechanical, hydraulic, and pneumatic systems as well as the use of all shop equipment, such as welding and machining equipment Additional Requirements: • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Description Reliability Sr. Manager We are seeking a strategic and accomplished reliability engineer to lead the end-to-end reliability management for our eBOS (Electronic Balance of System) product suite. This role will oversee reliability engineering at Premier PV to bring reliable new products to market, reduce failure rates of existing products, and work with Design and Manufacturing to ensure reliability is built into the product. This position requires reliability expertise, test equipment know how, deep technical understanding of solar and power systems, and experience with reliability program management. Key Responsibilities: Reliability Program Management: • Lead the company’s reliability program from end to end., • Define and execute the reliability engineering strategy in alignment with broader company goals., • Promote a customer-first culture focused on responsiveness, quality, and technical accuracy., • Select and build out reliability test laboratory, including ovens, chambers and test equipment., • Collaborate with Engineering, Quality, and Manufacturing teams to build test plans that demonstrate the reliability of Premier PV products., • Work with outside test labs to organize & conduct testing that is not possible on site., • Conduct risk assessment of new products from the early design stage to volume production., • Lead product qualifications including gap analysis, pass/fail criteria definition, schedule planning, and data analysis. Prepare reliability qualification test plans and reports., • Collaborate with cross-functional teams including design, manufacturing and field teams to understand eBOS failure mechanisms and recommend corrective actions to improve quality standards and best practices., • Participate in design reviews and design FMEAs. Use DFMEA as an input for reliability testing., • Participate in manufacturing readiness review and process FMEAs. Use PFMEA to guide Ongoing Reliability Testing., • Help drive failure analysis on Field Returns. Work with Customer Experience to capture closed loop learning from field returns., • Create Test Plans for new products in coordination with the Phase Gate process. Qualifications: • Bachelor’s degree in Engineering, Physics, or related technical field (advanced degree preferred)., • 10+ years of experience in reliability engineering leadership, preferably in the solar, electronics, or energy industry., • Strong background in reliability, quality, and new product introduction., • Deep understanding of eBOS components including combiners, rapid shutdown devices, disconnects, and wiring systems., • Demonstrated problem-solving skills and successful track record in a fast-paced, high pressure tech industry, • Strong professional integrity and sense of ownership, • Self-motivated, requires minimum supervision, with a proven track record of reliability and a strong work ethic, • Take assignments with a sense of urgency; deliver solutions and results in a timely manner, • Problem solving skills and ability to summarize/document analysis and test procedures., • Excellent communication skills with management, internal and external teams, • Flexible team-player with a strong attention-to-detail, proactive sense of initiative, and responsible working attitude, • Ability to travel to remote project sites (approximately 30-50% travel) Preferred Qualifications: • In-depth knowledge of PV system architecture, NEC code requirements, and UL compliance standards., • Understanding of Reliability Physics and Materials Properties (thermal, electrical, mechanical, chemical), especially those related to eBOS products., • Experience using standard reliability applications such as JMP, Reliasoft Weibull++/ALTA, or similar software., • Experience in partnering with Quality, Engineering, and Product Management teams to address systemic issues., • Lean Six Sigma, Certified Reliability Engineer, or other continuous improvement certifications are highly desirable BENEFITS AND PAY: • Competitive salary range, based on experience and qualifications. AGENCY STATEMENT: We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of Premier PV. EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Associate Practice Area Director - Healthcare Design As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are currently seeking a performance-driven, highly motivated leader to collaborate with our leadership team with the opportunity to grow into and oversee our engineering practice area in our Southern region. This is an exciting opportunity to leverage our well-established legacy and brand with existing clients and innovative projects. In this high-level role, you will lead the efforts to pursue, win and execute healthcare projects including inpatient hospitals, ambulatory surgery centers, behavioral health facilities, medical office buildings and other facilities. You will provide management review and oversee our regional healthcare team including development of business plans, target pursuits and execute a wide variety of projects, organizational structures, and processes. This role will report regional and practice area leadership for the firm. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. As a management owned private entity, we seek to reward our key leaders with ownership opportunities to drive overall performance and recognition. Job Responsibilities As an Associate Practice Area Director, you will oversee and expand an existing staff, coordinate the execution of all healthcare activities in your region and maintain client satisfaction. You will generate new revenue and increase existing revenue streams within the Healthcare Market Focus. You will stay externally focused on developing and deepening your network of prospective clients and business partners, including owners, architects, and PM/CM firms, as well as key general contractors. Track leads for major pursuits, forecast a pipeline of projects and develop winning strategies and teams. Additional responsibilities: • Stay abreast of the market both regionally and nationally and keep key team members at the technical forefront of this practice area, • Develop an appropriate network within the company to facilitate identification and sharing of relevant information between our global team for staffing and project pursuits, • Focus on ensuring technical excellence of project delivery and providing expert resolution of issues, • Develop, review and coordinate the regional practice area business plan in conjunction with the global Healthcare plan including coordinating the business plan with other practice areas, geographies, and services, • Demonstrate a knowledge of Design/Build proposals and contracts., • Coordinate goals with other members of the global team to help execute business plan, • Develop strategies and tactics to explore and penetrate new clients to increase national sales and higher margin work, • Oversee project financials and interoffice / client reporting structure, • Work towards revenue generation goal of $1 million to $3 million (annual average for two years), • Develop and articulate the firm's value proposition in the market segment to develop market distinction, • Lead and/or support sales presentations while focusing on selling integrated services, • Be an active leader and problem solver guiding our team and our partners to successfully deliver exceptional projects, • Write articles, white papers and speak at industry conferences and events, • Responsible for strategic recruitment of senior staff with market specific experience; provide leadership to newly hired direct reports Job Requirements: The ideal candidate will possess the necessary leadership skills to oversee all efforts for clients, demonstrating an understanding of owner / client big picture business strategies and revenue goals, as well as the ability to foresee challenges. To succeed in this role, your technical expertise must be complemented by self-motivation, relationship building skills, effective communication skills, and the ability to effectively work in a fast–paced environment. The ideal candidate will be a recognized expert in the different market focus within the industry. Additional requirements: • Bachelor's degree in electrical or mechanical engineering; exceptional candidates may substitute significant years of experience, • 15+ years of design experience, preferably minimum of 5 years in consulting engineering or A/E firm, • Minimum of 5 years of management experience, • 5+ years' experience in developing business for engineering, • Thorough knowledge of MEP systems, • PE registration is required., • Effective team player with the ability to work independently or in a team environment As an Associate Practice Area Director with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. Syska wide Pay Range$115,448—$173,173 USD

Job DescriptionPolk Mechanical is a leading mechanical construction and service contractor in Texas, known for tackling complex projects with excellence, safety, and integrity. Our reputation is built on delivering high-quality solutions, cultivating strong client relationships, and fostering an environment where employees thrive and grow. As we continue to expand in the DFW market, we are seeking a Director of Fabrication.THE POSITIONThe Director of Fabrication supports the strategic, long-term planning of Fabrication across all Polk Operating Units. This position is closely tied to supporting, improving and growing the Polk Fab Shop, but is also the main point of communication regarding the strategic use of 3rd Party Fabrication partners. This role is tasked with engaging on all Polk Projects very early on, to identify prefabrication opportunities, evaluate them, identify the cost vs gain of the fab, and to start planning out that Fabrication work during the first months of the project. They will work closely with Project Teams to help them effectively execute Fabrication Plans, ensuring the VDC Team Members are involved early to help the BIM Process be more effective. This position will also have oversight of the Polk Fabrication facility, to guide strategic planning regarding Polk Fab Shop staffing, equipment purchasing, and flow of work through the facility. The Fab Shop Manager will report directly to the Director of Fabrication. This position reports to Vice President of VDC & Fabrication.ESSENTIAL DUTIES AND RESPONSIBILTIES • Lead company prefabrication strategy by partnering with project, field, and VDC teams to identify and execute prefab opportunities early., • Review scopes, schedules, and contract documents to define effective fabrication approaches., • Guide project teams through prefab execution from design through shop production and field delivery., • Oversee coordination between fabrication shop, projects, purchasing, VDC, and field operations., • Lead the fabrication shop through the Fab Shop Manager, ensuring safety, quality, productivity, and capacity alignment., • Manage production planning, workflow optimization, and prioritization of fabrication requests., • Track productivity, quality, and delivery performance and drive continuous improvement., • Champion standardization, LEAN practices, and operational excellence across the organization.MINIMUM REQUIREMENTS, • Bachelor’s degree in Construction Management, Mechanical Engineering, or related field (or equivalent experience)., • Lean, PMP, or trade certifications preferred., • OSHA 30 (or ability to obtain)., • NCCER (Pipefitting/Plumbing) preferred., • PMP, CM-Lean, or similar certifications a plus., • Welding certifications beneficial but not required.EXPERIENCE, • 10+ years in mechanical construction, fabrication, or manufacturing, including 3+ years in leadership, • Proven experience managing a fabrication shop or prefabrication program., • Strong collaboration with project teams, field leadership, and VDC/BIM., • Demonstrated success with process improvement and Lean methodologies., • Experience with budgets, equipment selection, and capital planning.SKILLS & ABILITIES, • Deep understanding of piping and plumbing systems, fabrication techniques, spooling, welding processes and mechanical construction processes is required., • Experience translating BIM/VDC models into shop-ready fabrication packages., • Effective leader with strong communication and cross-functional collaboration skills., • Ability to manage capacity, resources, and multiple project priorities., • Proactive, adaptable, and able to drive a prefab-first culture.WHY YOU’LL LOVE WORKING HERE, • Work with one of Texas’s top mechanical contractors recognized for excellence and innovation., • Competitive compensation and performance-based incentives., • Comprehensive benefits package including health, dental, vision, and 401(k) with company match., • Opportunities for professional growth and advancement., • A culture that values safety, teamwork, and long-term success., • Paid Vacation & Holidays, • Career Advancement & Training Opportunities, • 100% Employer-Paid Medical, Dental & Vision Insurance for employees, • 401(k) Retirement Plan with employer matching, • 100% Employer-Paid Life & Disability Insurance

Job Description Operations Manager – Manufacturing & Distribution Location: Dallas–Fort Worth, TX Employment Type: Full-Time About The Opportunity We are a leading designer and manufacturer of food handling, food preparation, and material handling equipment serving major foodservice, retail, and e-commerce customers. As we continue to scale, we are seeking a high-impact operations manager to lead our manufacturing and distribution operations in the Dallas–Fort Worth region. This role is ideal for a hands-on leader and team builder who thrives in a fast-paced environment and has a proven ability to drive performance, develop people, and create a highly aligned, accountable organization. Reporting directly to the vice president of national operations, this position plays a critical role in achieving aggressive growth and operational excellence goals. What You’ll Do • Responsible for the location's P&L and leading daily operations across all fabrication and production areas, including stainless steel, aluminum, and steel manufacturing, welding (MIG/TIG), cutting/punching, forming/bending, assembly, and inspection., • Develop and execute ERP-driven production schedules to meet demand and on-time delivery targets., • P&L and Budgeting Responsibility, • Build, mentor, and develop a high-performing leadership team., • Establish clear expectations and accountability across departments., • Provide ongoing coaching, feedback, and professional development., • Foster a culture of ownership, engagement, and continuous learning., • Drive collaboration between production, materials, quality, engineering, and logistics., • Ensure alignment around shared goals and KPIs., • Monitor capacity, labor utilization, and resource allocation., • Analyze KPIs and implement improvements., • Lead continuous improvement initiatives., • Champion quality and safety., • 10+ years of manufacturing leadership experience., • Strong background in metal fabrication processes., • Proven ability to develop teams and drive performance., • ERP system experience., • Strong mechanical aptitude., • Leadership impact role, • Growth-focused culture, • Medical, Dental, and Vision Insurance, • Flexible Spending Account (FSA), • 401(k) with company match, • Life Insurance, AD&D, and Long‐Term Disability, • Paid Time Off, • Ability to stand, walk, and sit; communicate in person and by phone, • Frequent bending, stooping, crouching, kneeling, and lifting up to 50 pounds, • Ability to work in a non‐temperature‐controlled manufacturing environment

ABM Electrical Power Services is looking for a Relay Commissioning Technician to join our team in Irving, TX. The Relay Commissioning Tech calibrates, installs, maintains, and repairs protective relays and associated equipment to ensure the efficient, safe, reliable operation of the electric grid. They will be required to maintain, install, repair, and troubleshoot complex control systems, protective relay systems (microprocessor and electro-mechanical); substation and electric utility protection systems; station automation and supervisory control and data acquisition (SCADA) systems. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ___ | ___ Responsibilities: • Interprets project-level scope of work and effectively plans commissioning and resource scheduling and provides team leadership for completing test activities efficiently, on time and without service interruptions, adhering to all established safety protocol., • Interprets substation drawings (e.g., single line drawings, AC and DC schematics, panel wiring diagrams, and panel layout drawings)., • Writing procedures and/or test plans in support of maintenance and construction activities including development of isolation plans and functional guidelines., • Testing, including (without limitation): reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc., • Leading and performing routine troubleshooting and repair of substation relaying and control equipment. Commission new substations, power equipment, relaying (electro-mechanical, solid state and microprocessor), pilot channel equipment (power line carrier, pilot wire, transfer, transfer trip, fiber optic, CVT’s, line tuners, line traps, etc.), controls and communications equipment., • Providing Project Technical Support to Field Service personnel., • Providing technical mentorship to junior level field service personnel., • Is considered a subject matter expert in the area of protective relaying in the field., • Serve as a technical lead for small project teams. Qualifications: • Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes, • Experience is desirable in any of the following related areas: substation design (including protection & control engineering); substation construction; substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing, • 3 phase power systems; power system protection & control schemes; test equipment; test equipment software, • Test equipment and toll/wiring usage; interpretation of wiring and elementary diagrams; basic test skills to perform duties listed above; basic PC skills, • Quickly learn and apply test procedure for various types of substation equipment; communicate effectively with diverse groups, tailoring communication for audience and situation, • Learn and apply client’s switching procedures and safety measures as required, • Reference and complete assignments as described in applicable specifications, • Perform regular field work both indoors and outdoors, • Ability to communicate effectively in English (inclusive of reading and writing) due to the nature of safety-related materials, documentation, and interactions with clients., • Proficient in Microsoft Office (Word, Excel and Outlook), • Valid Driver’s license and good driving record About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit . ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ABM does not accept unsolicited resumes.

Line of Business: Service & Support About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing * Lead and apply regional reliability engineering strategies to improve equipment performance, uptime, and maintenance cost effectiveness across multiple cement plants. * Monitor equipment health using condition monitoring technologies (vibration, thermography, oil analysis, and other predictive tools), analyze reliability data and KPIs, and translate insights into actionable maintenance plans. * Facilitate root cause and reliability failure analyses for equipment, process, quality, and production issues, ensuring sustainable corrective actions are implemented and tracked. * Collaborate with plant maintenance teams to optimize preventive and predictive maintenance programs, outage planning, and asset performance strategies. * Drive continuous improvement initiatives and support facilities in implementing Heidelberg Materials maintenance and reliability programs. * Develop and implement effective spare parts management strategies across the plants supported, ensuring identification and availability of critical spare parts, optimizing inventory levels and minimizing costs. What Are We Looking For * Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related field * Demonstrated experience in reliability engineering within a cement, heavy industrial, or continuous manufacturing environment. * Strong working knowledge of reliability principles, condition-based maintenance, and root cause analysis methodologies. * Proficiency with predictive maintenance technologies and computerized maintenance management systems (preferably SAP). * Strong analytical, problem-solving, and project management skills with the ability to support multiple sites remotely. * Willingness to travel to the plant and corporate sites supported for inspections, meetings, and project implementation. This role is based in a central location and provides remote support to multiple cement plants within a designated region. Travel to plant and corporate sites is required for inspections, meetings, and project implementation. What We Offer * Competitive base salary and participation in our annual incentive plan * 401(k) retirement savings plan with an automatic company contribution as well as matching contributions * Highly competitive benefits programs, including: * Medical, Dental, and Vision along with Prescription Drug Benefits * Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) * AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance * Paid Bonding Leave, 15 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled As part of our hiring process, we may use AI-assisted tools to support the screening and evaluation of candidate applications and interviews. These tools help streamline the initial assessment, but all decisions about candidate advancement are made by human recruiters and hiring managers. While technology supports early steps, every interview will be handled by experienced recruiters and hiring managers to provide a personal touch.

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support—helping clients maximize building performance, energy efficiency, and equipment lifespan. The Journeyman HVAC/R Technician is responsible for diagnosing, repairing, maintaining, and installing commercial HVAC and refrigeration systems. This role requires a skilled technician with hands-on experience across various systems, the ability to work independently, and a strong focus on safety, customer service, and technical excellence. * Troubleshoot, service, and repair commercial HVAC and refrigeration systems including RTUs, split systems, chillers, walk-in coolers/freezers, and ice machines. * Perform preventive maintenance and seasonal tune-ups on HVAC/R systems to ensure peak efficiency and performance. * Install HVAC equipment and refrigeration components per manufacturer specifications and local code. * Interpret and work from service manuals, blueprints, and schematics. * Recover and charge refrigerants in compliance with EPA and company standards. * Use digital gauges, multimeters, refrigerant scales, and diagnostic tools to evaluate systems. * Complete detailed service tickets and communicate findings and recommendations clearly to customers. * Maintain proper inventory on service truck and order parts as needed. * Adhere to company safety protocols and participate in toolbox talks and ongoing training. * Provide mentorship to apprentice technicians when applicable. * 5+ years of commercial HVAC/R service experience. * Strong knowledge of refrigeration systems and the refrigeration cycle. * EPA 608 Universal Certification required. * Proficient in troubleshooting and repairing electrical and mechanical HVAC issues. * Valid driver's license with a clean driving record. * Strong communication and customer service skills. * Ability to work independently in the field and manage time effectively. * Ability to lift 50+ lbs, work on ladders, rooftops, and in tight spaces. * Experience with energy management systems (EMS/BAS) a plus. * Knowledge of VRF/VRV systems, chillers, or boilers. * OSHA 10 or 30 certification. * NATE certification or equivalent technical credential. Benefits: * Competitive salary based on experience. * Health, dental, and vision insurance. * Paid time off and holiday pay. * Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support—helping clients maximize building performance, energy efficiency, and equipment lifespan. Position Summary We’re seeking an experienced Commercial Plumbing Service Technician to join our service team. The ideal candidate will have a strong background in commercial plumbing systems including backflow prevention, boilers (water and low-pressure steam), pump skids, hydro-jetting, and sewer services. The ideal candidate should be able to handle maintenance, emergency service calls, and contract work in large buildings. Key Responsibilities * Troubleshoot, maintain, repair and replace plumbing systems in commercial and institutional facilities including domestic water, sanitary and storm drainage, process piping, and specialty systems. * Perform preventive maintenance and corrective repairs on commercial boiler systems (both hot water and low-pressure steam), including controls, burners, gauges, valves, condensate return, blowdown and safety devices. * Service, troubleshoot and maintain pump skid systems used in water-boosting, heating/cooling loops, pressure maintenance, and fire/water systems. * Test, repair and certify backflow prevention assemblies and devices, maintaining compliance with municipal requirements. * Conduct hydro-jetting of drain and sewer lines, perform drain cleaning, and operate sewer inspection equipment to identify blockages, structural issues, or system defects. * Read and interpret blueprints, piping schematics, equipment submittals and preventive maintenance manuals; estimate labor, materials and time required for service calls and contract work. * Document all work including service logs, inspection sheets, compliance forms, and customer communication. * Maintain truck inventory, tools, and vehicle in a clean, professional condition. * Respond to emergency service calls on a rotating on-call basis, diagnosing problems quickly, coordinating with other trades when needed, and minimizing client downtime. * Ensure all work is performed in compliance with applicable codes and meet company safety & quality standards. Experience & Qualifications * Minimum 5 years of experience in commercial plumbing service for large-scale facilities (office towers, hospitals, schools, industrial plants). * Proven experience with commercial boiler systems including hot-water heating boilers and low-pressure steam boilers: routine and emergency maintenance, burner controls, pressure/temperature safety devices, condensate return, water treatment, and blow-down procedures. Knowledge of low-pressure steam practices as defined under regulatory codes is required. * Solid experience with pump skid systems: preferably including vertical-multistage, booster, or packaged skid units, with ability to understand pump curves, variable-frequency drives (VFDs), pressure/flow monitoring, isolating and servicing components. * Experience testing, repairing and certifying backflow prevention assemblies within commercial systems, with knowledge of local municipal test requirements and compliance. * Experience in sewer and drain service: hydro-jetting large sanitary/storm mains, performing clean-outs in commercial buildings, utilizing sewer-inspection cameras to locate blockages, structural defects or infiltration issues. * Ability to read and interpret blueprints, drawings, specifications, and to perform pipe layout, install and assemble piping, tubes, valves, fixtures, or specialty plumbing equipment. * Valid plumbing license issued by TSBPE (journeyman or master) * Valid driver’s license with a clean driving record. * Strong mechanical aptitude, excellent troubleshooting skills, ability to work independently or as part of a team, good communication with clients and internal staff, professionalism in appearance and customer interaction. * Physical ability to perform job requirements: lifting 50 lbs. frequently, working in confined spaces, climbing ladders, scaffolding, or man lifts as required. Preferred / Bonus Skills * Certification as a Backflow Prevention Assembly Tester (BPAT) or equivalent. * Experience with large mechanical chilled-water/hot-water loops or central plant systems. * Familiarity with computerized maintenance management systems (CMMS), mobile tablet-based documentation and service reporting. * Experience working on multi-trade projects (coordinating with HVAC, electrical, mechanical). Benefits: * Competitive salary based on experience. * Health, dental, and vision insurance. * Paid time off and holiday pay. * Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support—helping clients maximize building performance, energy efficiency, and equipment lifespan. The Sheetmetal Foreman – Mechanical leads and supervises a small crew to safely and efficiently execute mechanical and sheet metal work in the field. This hands-on leadership role ensures the crew meets safety, quality, and productivity goals while performing regular trade work alongside the team. The Foreman is responsible for scheduling and coordinating daily activities, assigning tasks, and supporting project delivery through clear communication with field teams, superintendents, project managers, and clients. This position requires strong technical expertise, the ability to interpret blueprints and specifications, and the leadership skills to maintain high standards of workmanship and crew performance. * Perform regular non-supervisory work alongside the crew; set the pace and demonstrate proper work methods. * Lead the crew in following instructions received from supervisors and ensuring all deadlines are met. * Pass on instructions from supervisors and assign daily tasks to crew members. * Ensure new crew members are oriented to the job and understand expectations. * Assess the skill level and competency of each crew member; establish benchmarks for quality and productivity. * Coordinate on-the-job training and ensure apprentices are properly mentored by journeymen. * Promote teamwork, morale, and positive work behavior within the crew. * Maintain current knowledge of procedures, policies, blueprints, technical orders, and job directives. * Ensure adequate workflow to keep all crew members productive. * Facilitate and promote a strong, proactive safety culture. * Ensure daily adherence to safety standards and verify all workers are fit for duty. * Conduct weekly toolbox talks and provide guidance on technical safety questions. * Participate in safety and incident investigations and complete all required reports promptly. * Ensure the work area remains clean, organized, and hazard-free at all times. * Confirm the daily Task Hazard Analysis (THA) is completed before work begins. * Understand project plans, blueprints, and schedules; ensure crew activities align with production goals. * Ensure availability of all required tools, materials, and equipment; obtain supplies as needed. * Identify deficiencies in the project plan or schedule and communicate them promptly to the appropriate parties. * Translate general work requirements into prioritized daily assignments for the crew. * Adjust project tasks and crew schedules as needed to maintain productivity. * Report equipment and material shortages to the superintendent. * Coordinate with other trades to resolve scheduling conflicts. * Work with the crew to overcome job challenges and maintain efficient workflow. * Ensure all work meets or exceeds quality standards, specifications, and project requirements. * Verify that all crew members follow blueprints, plans, and applicable codes. * Inspect work in progress and completed tasks; initiate corrective actions promptly. * Recommend improved work processes to enhance productivity and quality. * Maintain accurate and detailed daily foreman logs or diaries. * Prepare all required reports, documentation, and timekeeping records. * Document late starts, early departures, and absences. * Assist the superintendent with tracking production, work progress, and quality documentation. * Recommend personnel actions including hiring, promotions, and disciplinary measures. * Perform additional duties as requested by management. * 7+ years sheetmetal experience + 5+ years as a qualified tradesperson. * Strong knowledge of sheetmetal systems, codes, and blueprints. * Familiarity with other construction crafts. * Proven leadership and crew supervision experience. * Strong communication, planning, and problem-solving skills. * Ability to manage documentation and administrative duties. * Understanding of OSHA and safety regulations. * High school diploma or equivalent. * OSHA-30 Benefits: * Competitive salary based on experience. * Health, dental, and vision insurance. * Paid time off and holiday pay. * Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support—helping clients maximize building performance, energy efficiency, and equipment lifespan. The Pipefitter is responsible for assembling, installing, and maintaining piping systems used in commercial mechanical construction projects. This includes HVAC, chilled water, heating hot water, and process piping. The role requires precision, safety, and the ability to work from drawings and specifications in a fast-paced environment. * Read and interpret blueprints, isometric drawings, spool sheets, and specifications. * Measure, cut, thread, groove, and bend pipe using hand and power tools. * Layout and install carbon steel, stainless steel, copper, and/or PVC piping systems. * Fit and align pipe accurately before welding or mechanical joining. * Use supports, hangers, and restraints according to code and specifications. * Assist welders by prepping pipe and holding alignment during welding. * Perform hydrostatic and pneumatic testing on piping systems. * Ensure quality workmanship and compliance with all applicable codes. * Follow all company safety policies and procedures, including use of PPE. * Communicate with supervisors and other trades to coordinate installation. * Keep tools and equipment in proper working condition. Qualifications * 3+ years of experience as a pipefitter in commercial or industrial mechanical construction. * Ability to read and work from blueprints, drawings, and P&IDs. * Proficient in measuring, cutting, fitting, and joining various piping materials. * Knowledge of mechanical systems (HVAC, hydronic, process piping). * Strong understanding of OSHA safety practices and procedures. * Ability to lift 50+ lbs and work in tight spaces or at heights. * Basic math and layout skills. * OSHA 10 certification preferred. * Experience on commercial projects such as schools, hospitals, or data centers. * NCCER, UA, or other pipefitter certification a plus. * Experience working alongside welders and inspectors for code compliance. Benefits: * Competitive salary based on experience. * Health, dental, and vision insurance. * Paid time off and holiday pay. * Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support—helping clients maximize building performance, energy efficiency, and equipment lifespan. We are seeking a highly skilled Mechanical Superintendent to lead field operations for commercial mechanical construction projects. This role is responsible for overseeing the safe, efficient, and high-quality installation of HVAC, plumbing, and piping systems on large-scale commercial job sites, ensuring all work meets project specifications, code requirements, and company standards. * Lead and manage field crews, including foremen, journeymen, and apprentices across HVAC and plumbing scopes. * Coordinate with project managers, general contractors, and other trades to ensure efficient workflow. * Plan and sequence work according to project schedules, ensuring deadlines and milestones are met. * Interpret and enforce project blueprints, specifications, and code compliance. * Conduct job site inspections for quality control, safety, and productivity. * Maintain accurate field documentation including timecards, daily reports, and material tracking. * Oversee material deliveries and inventory, ensuring tools and equipment are available as needed. * Provide leadership, training, and mentorship to team members. * Resolve field issues, RFIs, and unforeseen conflicts swiftly and effectively. * Enforce OSHA and company safety standards at all times. * Minimum 7–10 years of plumbing experience in commercial mechanical construction. * Prior supervisory or foreman experience required. * Strong knowledge of commercial piping systems and plumbing codes. * Ability to read and interpret complex construction drawings and documents. * Strong organizational, problem-solving, and communication skills. * Proficient in Microsoft Office and field management software (e.g., Procore, PlanGrid, or equivalent). * Valid Journeyman or Master Plumber License (state-specific). * OSHA 30 certification preferred. Benefits: * Competitive salary based on experience. * Health, dental, and vision insurance. * Paid time off and holiday pay. * Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Fleet Maintenance & Detailing Associate (Autonomous Vehicles) Irving, TX $20.00 – $23.00 per hour Full-Time | Overnight & Morning Shifts Available 1-Year Contract Opportunity Candidates with hands-on automotive or mechanical experience are strongly encouraged to apply. Mechanics, automotive technicians, dealership employees, fleet maintenance workers, tire/lube technicians, and candidates with light mechanical experience are highly preferred. What You’ll Do As a Fleet Maintenance & Detailing Associate, you will help ensure the autonomous vehicle fleet is clean, charged, inspected, and ready for daily operations. Key Responsibilities • Wash, clean, sanitize, and detail vehicles inside and out, • Clean and inspect autonomous vehicle sensors, cameras, and equipment, • Charge vehicles and ensure systems are connected for data uploads, • Perform basic vehicle inspections including:, • Tire pressure, • Fluid levels, • Lights, • Windshield wipers, • Exterior condition checks, • Perform light maintenance tasks such as:, • Topping off fluids, • Replacing wiper blades, • Minor troubleshooting, • Safely move vehicles throughout the lot and charging areas, • Maintain digital inspection reports and document issues accurately, • Valid driver’s license with a clean driving record, • Minimum 3 years of driving history, • Ability to work overnight and late-night shifts, • Basic computer skills for reporting and fleet monitoring, • Ability to work independently and follow safety procedures, • Automotive mechanic experience, • Vehicle maintenance or repair experience, • Auto detailing or car wash experience, • Dealership, fleet, porter, or service department experience, • Experience as a lube technician, tire technician, or maintenance technician, • Experience working with electric vehicles (EVs) or autonomous vehicle technology Available Schedules/Overnight Shifts • Thursday – Tuesday | 7:00 PM – 3:30 AM, • Thursday – Tuesday | 9:00 PM – 5:30 AM You Qualify If You Have Experience In Any Of The Following: • Automotive Technician, • Mechanic, • Fleet Maintenance, • Car Detailer, • Porter, • Lube Technician, • Tire Technician, • Vehicle Inspector, • Service Technician, • EV Technician, • Dealership Service Associate #LI-DNI Powered by JazzHR Tez5df40GX

Job DescriptionISEE is seeking a full-time Engineering Technician to join our team. We are looking for someone with a good mix of electrical and mechanical skills. This hire will work alongside engineers to implement electromechanical systems, update the existing fleet, and launch new vehicles at customer sites. The ideal candidate has 5+ years of relevant work experience. Responsibilities- Interface electromechanical systems with conventional automotive vehicles- Build up electrical and/or mechatronic systems- Test and troubleshoot complex electromechanical systems- Debug issues stemming from either add-on modifications, inherent vehicle issues, or the interface between the two- Documentation of in-field issues and maintenance- Write reports and record data on testing techniques, laboratory equipment, and specifications to assist engineers. - Assist in autonomous vehicle bring-up at customer locations- Basic software work; uploading updated code to various vehicle subsystems- Communicate issues with a remote hardware team, local mechanics and test engineers Required Skills- Ability to read, write, and interpret technical drawings & schematics- Basic knowledge of automotive systems and repair- Diagnostics and troubleshooting experience- Basic electrical skills: Soldering, ingress protection, fault identification, wiring harnesses.- Basic mechanical skills (knows their way around a vehicle)- Familiarity with air systems, preferably semi-truck air brake systems- Able to lift more than 40 lbs.- Travel requirement up to 30% Preferred - Robotics/autonomous systems/transportation experience is a plus- SMT soldering experience, including hand board assembly (solder paste, ovens, hand solder work)- Familiarity with multimeters, oscilloscopes, power supplies, function generators, hand tools, power tools, adhesives, and sealants- General knowledge of materials and their mechanical properties We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionVehicle Build - AV/Robotics Technician ISEE is seeking an Autonomous Vehicle/Robotics Technician to join our Autonomous Vehicle Build Operations team. Technicians will help to set up assembly areas, build prototype components and systems, install those systems on the autonomous tractors, configure and bring up new vehicles, and perform end of line testing and system debugging. Role responsibilities include:- Assemble and install ISEE electromechanical systems and components- Configure, commission, and troubleshoot new hardware and vehicle builds- Assemble and install wiring harnesses- Document issues and provide feedback to engineering and leadership- Configure electronic modules and flash software- Perform in-process quality assurance checks- Perform end of line testing and system debugging. Generate test reports- Troubleshoot issues with the autonomy system and the base vehicle as needed- Help to set up workshop assembly areas Required Qualifications- 2+ years of technician experience in vehicle repair and maintenance. Experience with diesel and tractor hydraulic systems is a plus.- Or 2+ years experience with robot assembly, testing, and troubleshooting- Experience assembling electronic/mechanical assemblies- Light machine shop experience is beneficial- Knowledge of basic electrical theory- Excellent written and verbal communication- Ability to use a computer and follow build assembly instructions- Proven interest and technical capability to work with modern automotive systems- Detail oriented mindset with a focus on safety and procedure We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSalary: DOE Mechanical, Electrical, Plumbing Inspector (MEP) Dallas, TX Mechanical, Electrical, Plumbing Inspector (MEP) Dallas, TX Full-Time | On-Site | Dallas, TX Why CMTS? Every day at CMTS, our team delivers infrastructure projects that positively impact lives and communities. With over 42 years of industry experience, CMTS has built a strong foundation for continued success, providing project and construction management services to public and private clients nationwide. We value our employees by fostering a culture of learning, professional development, and collaboration. CMTS is committed to maintaining a work environment that emphasizes safety, integrity, and accountability while supporting work-life balance and employee well-being. Our teams are empowered to grow, contribute, and make a meaningful impact through the projects we deliver. About Your Role The MEP Inspector is responsible for monitoring and inspecting mechanical, electrical, and plumbing construction activities to ensure that all installations comply with approved construction documents, project specifications, applicable codes, and quality standards. This position supports the Construction Management and Inspection team by verifying proper installation of building systems including HVAC, electrical distribution, plumbing infrastructure, and associated utility systems. The inspector will work closely with project managers, resident engineers, contractors, and design consultants to ensure compliance with contract requirements and maintain quality throughout construction. Education Requirements • High School Diploma or equivalent required., • Associate or bachelors degree in engineering, Construction Management, or a related technical field is preferred. What Youll Need to Get the Job Done • Minimum 5 to 10 years of experience performing MEP inspection or construction inspection on commercial, infrastructure, or transportation projects., • Demonstrated experience inspecting mechanical, electrical, and plumbing systems including HVAC equipment, electrical distribution systems, fire life safety systems, and plumbing systems., • Ability to read and interpret construction drawings, system diagrams, and project specifications., • Experience working in complex construction environments such as airports, transportation facilities, data centers, healthcare facilities, or large commercial projects., • Strong knowledge of construction inspection procedures, quality assurance practices, and industry codes., • Strong written and verbal communication skills with the ability to coordinate with contractors and project teams. What Will Make You Stand Out • Certifications such as ICC Inspector, NICET, OSHA 30, or related inspection credentials. - Preferred, • Experience supporting aviation, transportation, or large capital infrastructure programs. - Preferred, • Familiarity with applicable codes and standards including NEC, NFPA, ASHRAE, OSHA, and local building codes. - Preferred, • Experience with construction management software such as Procore, Bluebeam, BIM 360, Prolog, or similar platforms. - Preferred What Youll Do • Inspect mechanical, electrical, and plumbing systems to verify compliance with approved plans, specifications, and applicable building codes., • Monitor contractor installation of HVAC equipment, ductwork, piping systems, pumps, electrical distribution equipment, conduit systems, lighting, plumbing infrastructure, and related building systems., • Review and interpret construction drawings, specifications, shop drawings, and submittals to verify proper installation of MEP systems., • Verify that materials and equipment used in construction conform to approved submittals and project specifications., • Observe system testing, commissioning, and startup activities for mechanical and electrical systems., • Identify deficiencies, non conforming work, and potential system issues and coordinate resolution with the construction management team and contractor., • Document inspection activities through daily reports, inspection logs, deficiency tracking, and photographic documentation., • Participate in construction coordination meetings and assist with resolution of field issues., • Monitor contractor compliance with safety regulations and applicable OSHA requirements., • Support punch list inspections and final acceptance of MEP systems., • Maintain clear and accurate documentation of inspection activities in accordance with project quality assurance requirements. What You Can Expect from CMTS • Opportunities to work on high-impact infrastructure projects across the United States and the U.S. Virgin Islands, • Collaborative and growth-focused team environment, • Competitive compensation, • CMTS LLC offers 100% company-paid medical, dental, vision, 401k, life, and long-term disability insurance coverage for the employee., • Career advancement and professional development opportunities Salary Requirements • DOE Apply Now ! Equal Employment Opportunity CMTS, LLC is an Equal Opportunity Employer that does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, pregnancy, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state, or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment.

Urgently hiring Lean Manufacturing Engineer with HVAC experience! This Jobot Job is hosted by: Doug Goldman Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $85,000 - $105,000 per year A bit about us: Our Client is a leader in technological innovation within the HVAC industry. Their product line offers unmatched solutions to meet a variety of complex requirements. With a focus on cutting-edge technology, Our Client continues to set new standards in HVAC system performance and reliability. Why join us? Competitive Base Salary- $85-105K range/flexible for the right candidate Comprehensive Benefits Package: including health coverage, 401K with company match, profit sharing, and professional development support Flexible scheduling may be available based on consistently meeting performance criteria (and subject to management discretion) Opportunities for Advancement Job Details This Lean Manufacturing Engineer is a key process-improvement leader who is responsible for optimizing manufacturing operations. Requirements: Bachelor's Degree in Industrial Manufacturing, Mechanical Engineering, or related field 3+ years of experience in manufacturing environment (sheet metal fabrication highly preferred) Demonstrated history of working with lean manufacturing tools and methods Experience supporting production, tooling, or process engineering initiatives Strong understanding of manufacturing processes, workflow optimization, and lean methodologies CNC programming knowledge preferred Experience with Autodesk Inventory (preferred) Strong analytical skills for evaluating labor, materials, and performance data Ability to lead cross-functional teams through improvement initiatives Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

A chance to make a leadership impact on a growing company. This Jobot Job is hosted by: Adam Bennett Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $180,000 - $300,000 per year A bit about us: We are a full-service engineering design and consulting firm with expertise in delivering complex, high-performance infrastructure projects. Our team works across a wide range of technically demanding environments, partnering with some of the most sophisticated clients in the industry to bring large-scale systems to life — on time, safely, and to the highest standards. We're a collaborative, growth-oriented organization where technical excellence and professional development aren't just buzzwords — they're built into how we work every day. Why join us? This is a rare opportunity to step into a senior executive role at a firm operating at the forefront of mission-critical infrastructure. You'll have a genuine seat at the table — shaping the strategic direction of an entire service line, building and mentoring a national team, and working on some of the most complex and consequential projects in the industry. The firm is growing, the work is high-impact, and the leadership culture is one that values expertise, clear communication, and results. If you want to do the most interesting work of your career while leaving a lasting mark on how a high-growth firm delivers at scale, this is it. Job Details 15+ years of experience commissioning complex building systems, including MEP infrastructure in mission-critical or high-availability environments (data centers, labs, etc.) 7+ years in a senior leadership role with ownership of teams, budgets, and strategic operations Deep technical expertise across HVAC, UPS, generators, BMS, switchgear, chillers, and medium-voltage systems CCP, CxA, or equivalent commissioning certification strongly preferred Proven ability to lead multidisciplinary teams through high-pressure, deadline-driven project environments Strong executive presence — able to communicate clearly, build consensus, and influence senior stakeholders across internal and external organizations Familiarity with NEC, ASHRAE, NFPA, IEEE, and other applicable commissioning standards and codes Experience developing SOPs, QC protocols, and safety practices at a program or division level Proficiency in MS Office; experience with Bluebeam, AutoCAD, Revit, or commissioning platforms (e.g., CxAlloy) a plus Multi-region or national delivery experience preferred Bachelor's degree in electrical or mechanical engineering (or equivalent technical/military experience) Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

This Jobot Job is hosted by: Tracy Hann Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $80,000 - $90,000 per year A bit about us: We are a specialized manufacturer delivering engineered solutions that protect people, industrial operations, and the environment — playing an active role in the energy transition and environmental stewardship on a global scale. We are looking for a Quality Engineer to lead quality assurance and control efforts across our custom-engineered equipment projects. This role plays a key part in ensuring our products meet customer specifications, industry standards, and internal quality expectations—from fabrication through final testing. Unfortunately, we cannot offer VISA sponsorship at this time. Why join us? Generous PTO 401k with Match Medical - high deductible or PPO Dental, vision Virtual Medicine Prescription Drug Coverage Wellness programs and discount HSA/FSA Retirement Basic Life & Accidental Death & Dismemberment Insurance Short-Term and Long-Term disability Employee assistant program Employee stock purchase plan ________________________________________ Why this role Work on custom, engineered industrial systems (not repetitive production) High visibility across engineering, manufacturing, and customer teams Opportunity to drive process improvements and quality standards in a growing organization Be part of a company focused on environmental impact and industrial sustainability Job Details This is a hands-on, cross-functional position where you’ll work closely with engineering, operations, suppliers, and customers to ensure quality is built into every stage of the process. You’ll be responsible for: Developing and maintaining QA/QC processes and standards Supporting inspections, testing, and product validation Partnering with internal teams and external vendors to ensure compliance Driving continuous improvement initiatives across manufacturing and quality systems ________________________________________ Key Responsibilities Collaborate with engineering, operations, purchasing, and customer teams to ensure products meet quality, delivery, and performance expectations Lead continuous improvement initiatives using Lean and quality methodologies Support and maintain the company’s ISO 9001 Quality Management System Develop and manage inspection plans, welding procedures, and NDE requirements based on project specifications Oversee quality inspections of fabricated equipment, including skids, piping, and structural steel Work with suppliers to define, implement, and audit quality standards Manage product inspection, testing, and release processes to ensure compliance with design requirements Investigate quality issues using root cause analysis (RCA, 5 Whys) and drive corrective actions Interface with customers, auditors, and third-party inspectors to ensure quality expectations are met Support product testing and validation in collaboration with the design team ________________________________________ What We’re Looking For Bachelor’s degree in Engineering (Mechanical preferred) 5+ years of experience in quality engineering within industrial or custom equipment manufacturing Experience working with structural steel, piping systems, or fabricated equipment Familiarity with ISO 9001 quality systems Knowledge of ASME codes related to fabrication is a plus Experience with Lean Manufacturing and/or Six Sigma principles Strong understanding of quality tools (RCA, corrective/preventive actions, etc.) Proficiency with Microsoft Office tools Certifications such as CWI or ASQ (CQE, CQA, etc.) are a plus Ability to travel up to ~15% ________________________________________ Why this role Work on custom, engineered industrial systems (not repetitive production) High visibility across engineering, manufacturing, and customer teams Opportunity to drive process improvements and quality standards in a growing organization Be part of a company focused on environmental impact and industrial sustainability Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

$$$ Sign On Bonus / $$$ Full Corporate Relocation Package This Jobot Job is hosted by: Ray Bahl Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $105,000 - $130,000 per year A bit about us: We’re partnering with a leading, privately held energy operator that specializes in acquiring and optimizing mature oil & gas assets across the U.S. This organization owns and operates the majority of its assets—meaning your work directly influences production, efficiency, and profitability on a daily basis. This is not a back-office engineering role—this is a hands-on, high-visibility position where your decisions drive real operational outcomes. Why join us? Designed to reward performance and support long-term success: Competitive base salary + performance-based bonuses Comprehensive medical, dental, and vision coverage 401(k) with company match + retirement benefits Generous PTO + paid holidays Life & disability insurance Tuition assistance / professional development opportunities Wellness programs and employee support resources Flexible work environment with strong work-life balance focus Culture You’ll Join Collaborative, team-first environment with direct access to leadership Known for a friendly, relationship-driven culture with strong internal support Emphasis on empowering engineers to make decisions and drive change Stable organization with decades of success across market cycles Job Details What You’ll Be Doing Optimize field operations to increase production, reduce costs, and improve asset performance Analyze production data, identify trends, and implement efficiency improvements across wells and facilities Partner with field teams, operations, and leadership to execute production strategies Troubleshoot operational issues and recommend engineering solutions Support capital projects, workovers, and facility upgrades Ensure compliance with safety, environmental, and regulatory standards Drive continuous improvement initiatives focused on efficiency, uptime, and emissions reduction What They’re Looking For Bachelor’s degree in Engineering (Petroleum, Mechanical, Chemical, or related) 2–4+ years of experience in oil & gas operations, production, or field engineering Strong analytical and problem-solving skills Experience working with production data, well performance, and field optimization Ability to work cross-functionally with field personnel and leadership Hands-on mindset with a desire to own outcomes—not just analyze them Why This Role Stands Out True operational ownership – Over 90% of assets are operated, so your work has an immediate impact High visibility – Work directly with decision-makers in a flat, collaborative structure Variety – Exposure to multiple basins, assets, and operational challenges Growth – Opportunity to expand into leadership, asset management, or technical specialization Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Texas-based building automation system software and controls contractor This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: A Texas-based building automation system software and controls contractor that specializes in the installation, repair, and service of BACnet DDC control and energy management systems. Why join us? Competitive salary based on experience. Comprehensive health, dental, and vision insurance. 401(k) retirement plan with employer match. Paid time off and holidays. Ongoing professional development and certification reimbursement. Job Details HVAC Controls Engineer – Building Automation Dallas-Fort Worth About the Role: We’re looking for a Controls Engineer to support the design and development of building automation systems across commercial projects. This role is ideal for someone who enjoys solving complex problems, working across multiple systems, and being involved from design through execution. ________________________________________ What You’ll Do Design HVAC and building automation control systems based on project plans Create system layouts, wiring diagrams, and control drawings Prepare submittals, as-builts, and O&M documentation Select control devices and ensure designs meet project specifications Work closely with project managers, engineers, and field teams Support integration across HVAC, lighting, access control, and related systems Assist with BAS graphics and system interface development ________________________________________ What We’re Looking For Experience with HVAC controls or building automation system design Ability to read and interpret mechanical and electrical drawings Experience with AutoCAD or similar design tools Strong attention to detail and ability to manage multiple projects Degree in Engineering or related field preferred Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Maintenance Tech | Growth, Stability, Great Benefits This Jobot Job is hosted by: Robert Donohue Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $35 - $47 per hour A bit about us: We are a market leader in the food manufacturing industry with a long-standing reputation for quality, consistency, and innovation. As a family-owned company with multiple manufacturing facilities nationwide, we continue to invest in our people, our operations, and the future of our products. Our facilities feature advanced automation and modern production systems, creating an environment where skilled technicians can grow their careers while supporting high-performance manufacturing operations. We are looking for a Maintenance Technician to join our team in Garland, TX. (2nd and 3rd Shifts) Why join us? Starting pay: $35+/hour based on experience Additional premiums: o 10% premium for off-hours shifts o 15% premium for weekend work Work on state-of-the-art equipment Strong opportunities for advancement and skill development Average 45-hour work week with work-life balance focus Outstanding benefits package including: o $0 premium employee-only medical option o 401(k) with match + profit sharing o PTO + floating holidays o Tuition reimbursement o Wellness incentives Job Details What You’ll Be Doing: Troubleshoot and maintain production equipment across: o Processing o Packaging o Warehouse systems o Plant utilities Support highly automated equipment including: o Fillers o Case packers o Palletizers o Conveyors Maintain utility systems including: o Boilers o Air compressors o Ammonia refrigeration o Wastewater systems Work closely with Maintenance, Engineering, and Operations teams Perform preventative maintenance and corrective repairs Follow GMP, food safety, and housekeeping standards Support building maintenance as needed What You Bring: Electrical: Ability to read electrical schematics 480V 3-phase troubleshooting and wiring Low-voltage controls VFDs and servo systems Mechanical: Welding (MIG, TIG, Arc) Pumps, valves, gearboxes Pneumatic and hydraulic systems Mill and lathe experience preferred Controls: Allen Bradley PLC experience: o SLC 500 o PLC 5 o Logix 5000 Additional: CMMS experience preferred Food or dairy manufacturing experience preferred Ability to lift 50 lbs and work active shifts Additional Details: Location: Garland, TX Shifts Available: o 2nd Shift o 3rd Shift Starting Pay: $35+/hr + shift premiums Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Calling all NPD Electrical Engineers II This Jobot Job is hosted by: Doug Goldman Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $85,000 - $110,000 per year A bit about us: We don’t just design HVAC equipment — we build scalable, engineered systems that perform in demanding environments. Our strength comes from long-tenured employees, strong cross-functional collaboration, and disciplined engineering processes. We are currently seeking an NPD Electrical Engineer II to support New Product Development with a focus on AutoCAD Electrical automation, rules-based configuration, and manufacturing-ready electrical design. This is a hands-on engineering role within our NPD team, reporting directly to the NPD Why join us? Proven stability with long-tenured employees Health & Dental care Competitive compensation and comprehensive benefits package 401(k) with company match and profit sharing Paid holidays and PTO Structured stage-gate development environment Cross-functional collaboration with Mechanical, Manufacturing, Quality, and Supply Chain Job Details Scope of Position: Working under the direction of the NPD Manager the NPD Electrical Engineer II develops, designs, and validates new products with a primary focus on AutoCAD Electrical deliverables and rules-based product selection and configuration. The role creates scalable, automated drawings and BOMs, integrates design data between the configurator, CAD, and ERP, and supports verification and manufacturing readiness to meet schedule, quality, safety, and cost targets. The position collaborates daily with Mechanical Engineering, Manufacturing/Production Engineering, Quality, and Supply Chain and adheres to stage-gate processes as well as the company’s Quality and Environmental Management Systems. Essential Duties and Responsibilities: Rules-Driven Design Automation – Build/maintain AutoCAD Electrical templates, symbol libraries, parametric blocks, wire numbering/cross-references, and drawing standards. Encode selection rules to automatically generate one-lines, schematics, panel layouts, and BOMs from a configurator/rules engine. Electrical Design and Calculations – Perform sizing and selection of power components (up to 600V 3-phase), short circuit/protection and conductor sizing, and low-voltage control wiring for relays/sensors/VFDs. Documentation & Change Control – Produce and maintain schematics, wiring diagrams, cable schedules, interconnects, and BOMs. Drive ECOs within PLM; collaborate with Supply Chain on alternates and cost. Assist in engineering of DDC controls and Automated Logic™ programming, and provide support related to interfacing of equipment with Building Automation Systems. Verification and Release - Author electrical DVP&R test plans; execute bench/lab validation and support pilot builds. Participate in DFMEA/PFMEA and convert actions into design/test updates Compliance Collaboration – Prepare drawing/component documentation to support Compliance (e.g., UL/CSA/IEC, EMC/EMI, and NEC/NFPA 70/70E). Coordinate submittals and follow-ups with Compliance Manufacturing Support – Partner with Production Engineering to ensure safety, manufacturability, testability, reliability, and cost targets are met. Triage build issues and implement corrective actions. Provide engineering performance data for the final product configuration in support of marketing literature development. Conforms to all Quality and Environmental Management System policies, objectives and obligations. Performs other related duties and responsibilities as assigned. Position Requirements: Areas of design engineering knowledge required include, but are not limited to: o Three-phase power up to ~600 V; low-voltage control wiring; panel layout and wiring conventions. o AutoCAD Electrical expertise (symbol libraries, parametric blocks, project properties, PLC I/O footprints, cross-referencing, reports). o Rules-based configuration/CPQ or engineering rules engines; attribute mapping to drawings and BOMs. o Working knowledge of UL/CSA/IEC, EMC/EMI fundamentals, and NEC/NFPA 70 & 70E, serve as MTR for UL508A Good communication skills High technical proficiency, intense focus on details, good organizational skills, and an ability to manage multiple projects in a stand-alone work environment. 3-5 years of experience and an Electrical Engineering or similar degree. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Senior Mechanical Engineer PE - (Healthcare Projects) - Hybrid This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $130,000 - $155,000 per year A bit about us: Award Winning Engineering Consulting firm with over 10 offices Nationwide. For over 70 years we consistently ranked among the largest MEP and structural engineering firms in the country, we are an industry leader with expertise in diverse markets, from education to healthcare to aviation. We are dedicated to meeting our clients' M.E.P. engineering needs by providing architectural lighting and mechanical systems design, building commissioning services, technology systems design, life support systems engineering, and fire protection engineering. Our two generations of technical expertise, combined with our business partnerships and the latest software and MEP technology, have earned us industry admiration, partner respect, and client loyalty. Why join us? Benefits: Meaningful and Impactful Work! Competitive Base Salary! Competitive Bonus Package! Complete Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Fun Company Activities! Job Details Senior Mechanical Engineer PE - (Healthcare Projects) - Hybrid Salary: $130K to $155K (Total Comp $140K to $165K) A well-established engineering consulting firm seeking a Mid to Senior Level Mechanical Engineer with a strong background in mission-critical projects, particularly within the healthcare and pharmaceutical sectors. The ideal candidate will be responsible for leading mechanical design efforts, ensuring compliance with industry standards, and delivering high-quality solutions for complex building systems. PE License Preferred Bachelor’s Degree in Mechanical Engineering from ABET Accredited College or University Security Clearance Preferred, Not Required 8 to 10+ years of experience with an MEP or Engineering Consulting firm designing HVAC building systems on complex projects Proficient in Revit and AutoCAD Proven Project experience in Healthcare Projects (Hospitals, Labs, etc.) etc. Develop HVAC designs from concept through completion of construction. Coordinate HVAC design requirements with architecture, structure, and other disciplines. Prepare engineering design calculations and mechanical system layouts, and detailed engineering reports and narratives. Experience with direct client contact and fostering those relationships. Assist in developing project objectives, goals, and documentation policies. Support business development initiatives by assisting the RFP process and interview process. Actively engage in community and/or industry-specific organizations. Desired, Not Required Experience and interest in Sustainable Building Design LEED AP or LEED GA with previous experience participating in the LEED or other green rating system process. An appreciation and understanding of architectural design and how architects work and think. BENEFITS Hybrid Work & Flexible Schedules Competitive Salary & Bonuses! Full Benefits Package! 401K Plan with Competitive Match Professional Development, Tuition & Certification Reimbursement Accelerated Career Growth! If Interested, Please Apply or Email Me Your Resume Directly at: Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

This Jobot Job is hosted by: Bryna Rabin Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $120,000 - $150,000 per year A bit about us: Phoenix based water and wastewater treatment plant construction team. If you are a Project Manager with Industrial and/or Heavy Civil experience, please apply! Why join us? We Value our Employees! Competitive Base Salary Bonus Medical, Dental, Vision 401k + match Company Truck/Truck Allowance Job Details Job Details: Take the next step in your career by joining our dynamic construction team as a Heavy Civil/Industrial Project Manager - Water/Wastewater. This role offers an exciting opportunity to oversee and manage complex water and wastewater projects, working with a diverse team of professionals in the construction industry. This role is perfect for those who love challenges, are passionate about the environment, and have a keen eye for detail. Responsibilities: As a Project Manager, your key responsibilities will include: 1. Overseeing and managing all aspects of water and wastewater and pump station construction projects from initiation to completion, ensuring that projects are completed on time, within budget, and to the highest quality standards. 2. Leading and coordinating a team of engineers, contractors, and other professionals during all phases of project development and execution. 3. Preparing, reviewing, and updating project plans, schedules, and budgets, and ensuring that all project activities align with these plans. 4. Coordinating and supervising the construction process from the conceptual development stage through to final construction, ensuring that all works are carried out according to design specifications. 5. Managing and resolving any issues or problems that arise during the project, and ensuring that any changes to the project are properly documented and communicated to all relevant parties. 6. Ensuring compliance with all local, state, and federal regulations and safety standards related to water and wastewater construction projects. 7. Building and maintaining relationships with clients, subcontractors, suppliers, and other stakeholders, and ensuring that all parties are kept informed of project progress and any changes. Qualifications: To be considered for this role, you will need: 1. A minimum of 5 years of experience in project management, specifically within the heavy civil/industrial construction sector. 2. Proven experience in managing water and wastewater construction projects, including experience with underground utilities, pump stations, site work, structural concrete, - knowledge of process piping, mechanical piping, and yard piping a plus! 3. Strong leadership and team management skills, with the ability to coordinate and oversee a team of professionals. 4. Excellent problem-solving skills, with the ability to identify and resolve project issues effectively and efficiently. 5. Strong communication and interpersonal skills, with the ability to build and maintain relationships with clients, subcontractors, suppliers, and other stakeholders. 6. A strong understanding of local, state, and federal regulations and safety standards related to water and wastewater construction projects. 7. Proficiency in project management software and other relevant computer applications. 8. A degree in Civil Engineering, Construction Management, or a related field is preferred. For immediate response, please email resume/projects directly to: Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

HVAC systems, building automation, and controls integration for commercial and industrial facilities This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $85,000 - $110,000 per year A bit about us: We are a well-established HVAC manufacturer’s representative delivering custom-engineered commercial HVAC and plumbing solutions across Texas. As our automation division continues to expand, we are seeking a highly technical Building Automation Systems Leader to drive design excellence, system innovation, and project execution across complex commercial and industrial environments. Why join us? Health Insurance: Employer covers employee cost; dependents paid by the employee. Basic Life Insurance: Health Reimbursement Account (HRA): 401(k) Plan: Ancillary Insurance options: disability, critical illness, hospital indemnity, accident and more. Paid Time Off (PTO): 15 days annually. Holidays: 9 company-paid holidays. Bonus: Eligibility for annual bonus. Transportation: Vehicle or mileage reimbursement for business travel. Learning: Professional development and career growth opportunities. Job Details Building Automation Sales Engineer Dallas-Fort Worth, TX Currently seeking a Building Automation Sales Engineer for a technical solutions provider that specializes in HVAC systems, building automation, and controls integration for commercial and industrial facilities. Our team works closely with engineers, contractors, and facility owners to deliver efficient, scalable control systems that optimize performance, energy usage, and occupant comfort across a wide range of building types. We are looking for a Building Automation Sales Engineer to drive growth across the Dallas market by developing strong client relationships and delivering tailored controls solutions for new and existing customers. ________________________________________ What You’ll Do Develop and maintain relationships with consulting engineers, mechanical contractors, and end users Identify project opportunities and provide technical sales support for building automation and controls systems Assist with system design, product selection, and control strategies for HVAC and energy management applications Prepare proposals, estimates, and submittals aligned with project specifications and customer needs Collaborate with internal engineering, programming, and service teams to ensure successful project execution Support project turnover, including coordination with field teams and customer expectations Stay engaged throughout the project lifecycle to ensure customer satisfaction and repeat business ________________________________________ What You Bring 3+ years of experience in BAS, HVAC controls, or technical sales within the commercial building space Strong understanding of HVAC systems, DDC controls, and building automation applications Ability to read and interpret mechanical plans, specifications, and sequences of operation Experience working with engineers, contractors, or facility teams in a consultative sales environment Strong communication skills and ability to build long-term relationships Self-motivated with the ability to manage a territory and prioritize opportunities ________________________________________ Nice to Have Experience with BAS platforms such as Niagara, Distech, Siemens, Johnson Controls, or similar Background in controls design, programming, or commissioning Familiarity with energy efficiency solutions or high-performance building systems Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Calling all Product Managers with HVAC industry experience This Jobot Job is hosted by: Doug Goldman Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $150,000 - $160,000 per year A bit about us: We don’t just design HVAC equipment — we build scalable, engineered systems that perform in demanding environments. Our strength comes from long-tenured employees, strong cross-functional collaboration, and disciplined engineering processes. Why join us? Proven stability with long-tenured employees Competitive compensation and comprehensive benefits package 401(k) with company match and profit sharing Paid holidays and PTO Health & Dental care Job Details Working under the general direction of the President, performs a wide variety of duties in the development, introduction and maintenance of our products. These activities are in support of the overall business plan. Essential Duties and Responsibilities: Prepare and distribute the “Product Development Specification” to include, but not be limited to: o A general preamble describing the overall scope of the project. o A detailed definition of the product design requirements. o A detailed analysis of the market for this product will include, but not be limited to: o Cost targets o Competitors o Argument for why the new product is needed o Market potential (dollars) o Expected market share growth over 5 years o A product introduction schedule. Manage projects to completion and assume overall responsibility for meeting target dates and target costs. Coordinate preparation of the “Product Introduction Package” with the respective sales manager to include, but will not be limited to:. o Sales brochure o Technical brochure o Feature/benefit analysis o Price sheets o Order forms o IOM manuals o Parts list (where applicable) o PowerPoint introduction program o Integration into Specifier and Informer electronic media Responsible for the preparation of list price tables, order forms, and technical literature. Maintaining of accurate records of product line sales and profits. Maintaining the list prices. Maintaining competitor information. Development of reports, training materials, training sessions and special projects completed from time to time. The product manager possesses technical knowledge, and competitive market knowledge, above and beyond the average employee and will be called upon to share that expertise as described. Performs other related duties and responsibilities as assigned. Position Requirements: 10-15 years of experience in HVAC industry Mechanical Engineering Degree or HVAC Engineering Product experience Microsoft Office, Power Point, Market Analysis, ROI Analysis in Excel Experience giving presentations Traveling to trade shows for presentations once or twice a year Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Sr Electrical Engineer PE (Hospital/Healthcare) - Hybrid This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $125,000 - $150,000 per year A bit about us: Award Winning Engineering Consulting firm with over 10 offices Nationwide. For over 70 years we consistently ranked among the largest MEP and structural engineering firms in the country, we are an industry leader with expertise in diverse markets, from education to healthcare to aviation. We are dedicated to meeting our clients' M.E.P. engineering needs by providing architectural lighting and mechanical systems design, building commissioning services, technology systems design, life support systems engineering, and fire protection engineering. Our two generations of technical expertise, combined with our business partnerships and the latest software and MEP technology, have earned us industry admiration, partner respect, and client loyalty. Why join us? BENEFITS Hybrid Work & Flexible Schedules Competitive Salary & Bonuses! Full Benefits Package! 401K Plan with Competitive Match Professional Development, Tuition & Certification Reimbursement Accelerated Career Growth! Job Details Sr Electrical Engineer PE - Healthcare Projects - (Hybrid) Salary: $125K to $150K (Total Comp $135K to $160K) We are seeking a Senior Electrical Project Engineer/Project Manager to join our Team! Successful Candidates will have experience delivering Design/Build and Renovation Projects ideally for Healthcare, Hospitals, and Medical Facilities. Additional projects include Commercial, Education, Government, Transportation, etc. Must have Engineering Consulting experience managing multiple projects at various stages, including all planning, design, production, quality control and financial responsibilities. This person will provide technical leadership, mentoring & guidance to team members to assure total quality of all engineering efforts; Coordinates the activities of all team members and assures production meets schedules while producing a reasonable profit. Qualifications 10+ years of experience Designing and Managing Electrical/MEP Projects for Engineering Consulting or Design/Build environment Proven experience as an Electrical Engineer Designing Power and Lighting Building Systems on complex projects. Project Experience Delivering New Construction and/or Renovation Projects for Healthcare, Hospitals, and Medical Facilities. Additional projects in Commercial, Education, Government, Transportation is a plus.. Licensed Professional Engineer (PE) Proficient in AutoCAD and Revit Software Construction Costs and Life Cycle Analysis; Experience Managing Moderate to Complex Projects Ability to schedule and manage tasks for the electrical discipline Demonstrated success in technical / formal communication with clients and staff Proven ability to represent the electrical discipline at meetings Ability to mentor junior level staff. Excellent communication and interpersonal skills. Demonstrated familiarity with Local Building Codes & Standards. Strong technical leadership and management skills. BENEFITS Hybrid Work & Flexible Schedules Competitive Salary & Bonuses! Full Benefits Package! 401K Plan with Competitive Match Professional Development, Tuition & Certification Reimbursement Accelerated Career Growth! If Interested, Please Apply or Email Me Your Resume Directly at: Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Join Us! This Jobot Job is hosted by: Julia Toms Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $130,000 - $160,000 per year A bit about us: Paper & Pulp Services Company Seeking Regional Sales Manager – Paper Machine Services Why join us? Job title: Regional Sales Manager – Paper Machine Services Business area: Pulp & Paper Service Working location: Southwest US Remote with Approximately 70–75% in territory: Coverage may include LA, TX, OK, AL, AR and MS Compensation: $130k– $170k+ base (may extend depending on experience) and 20–25% bonus (based on individual and company performance) Job Details This role leads the Rolls Services business— a high-impact, client-facing leadership position responsible for managing revenue targets, customer engagement, and regional growth initiatives. The Regional Manager partners cross-functionally (Finance, Operations, etc.) and acts as the key liaison for customer escalations and business development opportunities. Ideal background: Proven experience in mechanical or industrial services, ideally within the pulp/paper or manufacturing sectors Strong grasp of sales management, business growth strategy, and customer relations Ability to manage both field operations and client-facing interactions Job Description: We are seeking a dynamic and strategic Regional Sales Manager to lead commercial operations for industrial service and manufacturing clients across the Southwest region of the United States. This is a high-impact, client-facing leadership role responsible for achieving revenue goals, driving market growth, and strengthening customer relationships. The ideal candidate will have experience in mechanical, industrial, or manufacturing services — particularly within industries such as pulp & paper, process manufacturing, or engineered materials. The Regional Sales Manager will partner cross-functionally with internal teams (Finance, Operations, Product, and Service) to ensure operational excellence, strong customer engagement, and continued business expansion. ________________________________________ Key Responsibilities Financial Management & Analysis Develop and execute the regional budget and sales plan. Track financial performance monthly, quarterly, and annually to ensure revenue and margin targets are achieved. Identify performance variances and implement corrective action plans promptly. Market Awareness & Forecasting Monitor competitor activities, regional market trends, and customer needs. Deliver accurate rolling sales forecasts and maintain weekly updates on revenue outlook. Identify new growth opportunities and adjust strategy proactively to capture emerging markets. Sales Process & Account Strategy Lead account planning and growth initiatives for key customers and prospects. Manage complex deals, pricing discussions, and contract negotiations. Promote consistent adoption of sales processes and CRM utilization across the team. Coach sales personnel on pipeline management and prioritization of high-value opportunities. Resource Allocation & Growth Allocate sales and support resources to maximize efficiency, coverage, and ROI. Encourage strategic prospecting and proactive growth activities. Set ambitious but achievable performance goals for team members. Team Leadership & Development Lead, mentor, and develop a regional sales team to ensure strong performance and professional growth. Manage daily operations, including expense approvals, travel coordination, and equipment oversight. Support onboarding, training, and career development initiatives. Uphold and promote health and safety standards across all operations. Cross-Functional Collaboration Act as the key liaison between the regional team and internal departments (Operations, Product, Marketing, and Finance). Collaborate closely with internal stakeholders to resolve customer issues and improve overall satisfaction. Ensure all customer interactions and documentation are accurately recorded in CRM systems. ________________________________________ Key Performance Indicators (KPIs) Regional revenue attainment and profitability Forecast accuracy and timely corrective action Customer satisfaction and retention rates Margin improvement and sales process adoption Employee engagement, coaching, and development outcomes ________________________________________ Qualifications Education: Bachelor’s degree in Engineering, Business, Finance, or a related field Experience: Minimum 7 years of experience in regional or technical sales, ideally within industrial services, pulp & paper, or manufacturing sectors Leadership: Proven experience managing direct reports and leading high-performing sales teams Financial Skills: Strong capability in budgeting, forecasting, and variance analysis Sales Expertise: Demonstrated success in developing account strategies, managing complex sales cycles, and driving process adoption Systems Proficiency: Skilled with CRM platforms and data-driven reporting tools Travel: Must be willing and able to travel extensively throughout the Southeast region ________________________________________ Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job ID: 725491BR Date posted: Apr. 27, 2026 Description: You will be the Additive Manufacturing Technician for the Advanced Manufacturing Technologies team. Our team is responsible for operating and optimizing high‑performance additive‑manufacturing processes. What You Will Be Doing As the Additive Manufacturing Technician you will be responsible for running, maintaining, and improving critical furnace and machine operations that enable large‑scale metal‑additive production. Your responsibilities will include, but are not limited to: \n • Run and maintain the solar vacuum furnace, including stress‑relief and aging profiles.\n, • Run and maintain the AIP HIP furnace for multiple material sets.\n, • Build and resurface large‑scale additive build plates, including EDM, surface grinding, and full inspection.\n, • Operate and service two large‑scale additive machines across two material families.\n, • Provide job, consumable, and cost updates to customers and leadership while partnering with downstream and upstream manufacturing functions.\n\n Why Join Us The ideal candidate is a hands‑on problem‑solver who thrives in fast‑paced, high‑impact environments. You will work directly with cross‑functional manufacturing teams, see your work translate into tangible production outcomes, and grow within a culture that rewards technical mastery. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • Ability to obtain a Secret level clearance, • Experience in heat treatment, either vacuum furnaces or HIP furnaces, additive experience a plus., • Strong problem-solving and independent thinking skills, • Ability to learn quickly on HMIs and manufacturing process documentation., • Certifications in furnaces through Solar or AIP, • Experience with heat treatment programs and outcomes, • Experience with Aluminum and/or Inconel additive manufacturing or heat treatment, • CNC programming and EDM experience With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Manufacturing Type: Full-Time Shift: First

Job ID: 725491BR Date posted: Apr. 27, 2026 Description: You will be the Additive Manufacturing Technician for the Advanced Manufacturing Technologies team. Our team is responsible for operating and optimizing high‑performance additive‑manufacturing processes. What You Will Be Doing As the Additive Manufacturing Technician you will be responsible for running, maintaining, and improving critical furnace and machine operations that enable large‑scale metal‑additive production. Your responsibilities will include, but are not limited to: \n • Run and maintain the solar vacuum furnace, including stress‑relief and aging profiles.\n, • Run and maintain the AIP HIP furnace for multiple material sets.\n, • Build and resurface large‑scale additive build plates, including EDM, surface grinding, and full inspection.\n, • Operate and service two large‑scale additive machines across two material families.\n, • Provide job, consumable, and cost updates to customers and leadership while partnering with downstream and upstream manufacturing functions.\n\n Why Join Us The ideal candidate is a hands‑on problem‑solver who thrives in fast‑paced, high‑impact environments. You will work directly with cross‑functional manufacturing teams, see your work translate into tangible production outcomes, and grow within a culture that rewards technical mastery. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • Ability to obtain a Secret level clearance, • Experience in heat treatment, either vacuum furnaces or HIP furnaces, additive experience a plus., • Strong problem-solving and independent thinking skills, • Ability to learn quickly on HMIs and manufacturing process documentation., • Certifications in furnaces through Solar or AIP, • Experience with heat treatment programs and outcomes, • Experience with Aluminum and/or Inconel additive manufacturing or heat treatment, • CNC programming and EDM experience With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Manufacturing Type: Full-Time Shift: First

Job Description Quality Ironworks, a fast-growing steel fabricator, has an immediate opening for an Entry Level Maintenance Tech, at our Dallas, TX location This candidate must be able to work on heavy industrial machinery. Experience with motors, pneumatic tools, hydraulic systems, single phase and three phase electricity, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. This experience is a plus but not required. This is a hands-on position that requires you to be out in the plant working on industrial machinery. Requirements: • Exposure/Interest in the areas of mechanics, pneumatics, hydraulics and electrical, • Interest in developing skills in industrial maintenance, industrial technology, mechanical drawing, math, computer programming, electronics, or another related field, • Critical thinking and problem-solving ability, • Should possess strong manual dexterity As a member of the team, you can expect: • Complete benefits package – Including health, dental and vision insurance, • 9 paid holidays, • Paid Vacation after 1 year of employment, • Opportunity for Advancement – many of our managers were promoted from within!, • Team environment – Enjoy working with a supportive group of employees that look out for one another., • Job stability – You can feel secure in your job because of the company’s agenda of predetermined projects. Note: No recruiter phone calls or agency inquiries please.

Job Description HiFyve is hiring a Blow Molding Technician in the plastics manufacturing industry in Garland, TX! Salary: $30/hr - $40/hr Shift: Full-Time – 1st, 2nd, and 3rd shift available. Location: On-site – Garland, TX Position Overview We are seeking a technical expert with extensive blow molding knowledge to support high-volume plastics manufacturing operations. This individual will serve as the go-to resource for technical problem-solving, process optimization, and team training. The role requires deep, hands-on experience with blow molding machinery, tooling, and process engineering. Job Duties and Responsibilities • Lead advanced troubleshooting of blow molding machinery and downstream equipment, • Optimize processes to improve product quality, reduce scrap, and maximize uptime, • Train and mentor technicians and supervisors on best practices for machine setup and changeovers, • Collaborate with plant leadership to identify process improvements and capital investment needs, • Support installation, commissioning, and validation of new equipment or technology upgrades, • Serve as the subject-matter expert for blow molding technical challenges at the Garland facility, • Ensure compliance with OSHA and internal safety standards while driving operational excellence Education & Experience Requirements • Technical or vocational degree/certification preferred; equivalent experience considered, • 10+ years of direct blow molding experience required (extrusion blow molding preferred), • Proven ability to lead advanced troubleshooting and process improvement initiatives, • Strong understanding of mechanical, electrical, hydraulic, and pneumatic systems, • PLC troubleshooting experience a plus Knowledge, Skills and Abilities • Recognized expertise in blow molding equipment and processes, • Strong leadership, training, and mentoring skills, • Ability to partner with plant leadership and technical staff to resolve critical challenges, • Problem-solving mindset with a drive to implement lasting technical solutions, • Hands-on, detail-oriented, and safety-focused If you are interested, please apply.

Job DescriptionSalary: Now Hiring: Fabrication Shear Machine Operator Build a Career, Not Just a Job Join Mestex At Mestex, we dont just fabricate metal we build long-term careers. Many of our employees have been with us for years (and even decades), and that kind of tenure doesnt happen by accident. It happens because we value our people, invest in their skills, and provide steady, meaningful work. Were currently seeking a Fabrication Shear Machine Operator who takes pride in precision, craftsmanship, and being part of a dependable manufacturing team. If youre looking for consistent work, opportunities for overtime, and a company that recognizes effort and experience, Mestex may be the right fit for you. Why work at Mestex? • Proven stability with long-tenured employees, • Competitive hourly pay with overtime opportunities, • Comprehensive benefits package, • Safety-first, clean manufacturing environment, • Modern equipment and structured training, • Opportunities to grow, cross-train, and advance, • A team culture where your skills matter and your work is respected Essential Duties and Responsibilities: Operational • Set up and operate mechanical shear machines safely and efficiently., • Read and interpret cut lists, blueprints, and engineering drawings., • Identify sheet metal types, finishes, and gauges accurately., • Optimize material usage to minimize waste and maximize yield., • Safely operate overhead cranes and forklifts to handle sheet metal., • Perform first-article inspections and verify dimensions using tape measures and calipers., • Organize completed parts by work order and routing., • Accurately charge time to work orders and maintain paperwork accountability., • Report daily production rates and setup changes. Quality & Documentation • Conduct in-process quality checks for edge finish and dimensional accuracy., • Document completion of parts and work orders., • Communicate with leadmen and engineering regarding setup issues or missing parts., • Review and update machine set up docs. Maintenance & Safety • Perform daily and weekly preventative maintenance on shear equipment., • Monitor blade condition and machine performance., • Maintain clean and organized work area., • Adhere to all safety and environmental protocols. Teamwork & Continuous Improvement • Participate in team meetings focused on workflow, safety, and production goals., • Assist in training and mentoring junior operators., • Support cross-functional initiatives to reduce lead time and improve quality., • Perform other related duties as assigned Position Requirements: • Highschool diploma or equivalent work experience., • Ability to read and interpret blueprints and technical drawings., • Knowledge of basic shop math and measurement principles., • Strong attention to detail and commitment to safety., • Physically able to lift top 50 lbs. and stand for extended period of times., • Willingness to cross train in other machine operator roles, • Willingness to work flexible shifts and overtime as needed. Preferred: • Experience with Cincinnati shear equipment, • Ability to perform basic program adjustments., • Basic understanding of 6S and Lean principles., • Knowledge of other fabrication equipment. (e.g. shears, press brakes, lasers.), • Minimum 1 year of hands -on machine operator experience preferred., • Experience with overhead crane and sit down forklift operation. Compensation & Benefits: • Competitive Hourly Rate based on experience and qualifications., • Attendance-based bonuses awarded quarterly for exceeding attendance standards., • Discretionary performance-based bonuses awarded for exceptional contributions, milestone achievements, and leadership in strategic initiatives., • Comprehensive benefits package, including health coverage, 401K + company match, profit sharing, and professional development support., • Paid Holidays, including two floating holidays to use at your discretion., • Company Provided Uniforms available upon completion of employment eligibility requirements., • Opportunities for advancement in a growing, custom-manufacturing environment. At Mestex, the work you do every day directly supports our customers, our production teams, and our success as a company. We believe in doing things the right way and recognizing the people who make it happen. If youre ready to work for a company that values reliability, skill, and commitment, wed love to hear from you.

Job Description Machine Operator Position Description: The Machine Operator performs equipment setup and operates machines in a safe and effective manner. This person performs a wide rage of electro-mechanical assembly duties as well as conducts quality checks ensuring quality meets or exceeds expectations. The ideal candidate possesses commitment to continuous improvement and a confident drive to win attitude. They will be able to demonstrate intense collaboration and teamwork with a focus and passion for customers and quality. This candidate will also demonstrate thoughtful and disciplined execution while maintaining time sensitive goals. Major Responsibilities Include: • Setup and operate a variety of machines in production to assemble printed circuit boards, • Interpret and follow standard procedures, written assembly instructions, assembly drawings and engineering documentation to achieve quality and production goals, • Document operating parameters and other operator level preventative maintenance on equipment including basic daily cleaning of machine surfaces, scrap bins, and surrounding production areas. (5S), • Follow all policies regarding safety and material handling, • Knowledge of workmanship standards related to assembly, • Develop a working knowledge of electronic components part numbers, descriptions, values, etc., • Communicate quality issues to the proper personnel, • Assist in the Production area as needed., • Ability to stand for long periods of time., • Must have good hand and eye coordination., • 1-3 years of experience, • Associate’s degree, relevant military experience, equivalent vocational education, or equivalent experience., • Basic math skills are important., • Demonstrated ability to read and interpret engineering drawings and follow instructions., • Organizational and problem-solving skills, • Knowledge of current safety requirements. Zentech Dallas is an Equal Opportunity Employer. Zentech will recruit, hire, train, and promote persons in all job titles without regard to real or perceived classification of race, ethnicity, ancestry, color, marital status, religion, national origin, veteran status, sex, sexual orientation, genetic information, gender identity or expression, age, or physical or mental disability.