Mechanical engineering jobs in Sacramento, CaliforniaCreate job alerts

Job Overview: Electro-Mechanical Maintenance Technician The Electro-Mechanic Technician (Manufacturing Maintenance Technician) performs project management duties, maintenance and repairs of all pneumatic machines and line equipment. Shift & Schedule: This is a full time position working 3rd Shift: Sun-Thur; 9:30PM-6AM. Flexibility to work overtime, weekends and holidays as scheduled is required. What you'll do: • Responsible for calibration of microprocessor based control equipment., • Responsible for repair/installation of general instrumentation and electrical control systems., • Required to be able to read and understand relay logic for the purpose of troubleshooting and repair., • Must be able to perform tests and calibration procedures using test equipment including but not limited to CRT terminals, data recorders, multimeter, megger, and amprobe., • Will frequently work under pressure to diagnose problems., • Must be able to troubleshoot and change PLC programming., • Must have understanding of power distribution and wiring practices., • Ability to install panel boxes, remote control equipment, motors, power and lighting circuits., • Ability to work with minimal supervision on all electrical jobs. Ability to complete work in conformance of any and all safe work practices., • Must possess a broad mechanical knowledge., • Diagnose, plan, & perform all operations necessary to install, modify, troubleshoot, repair, overhaul, rebuild, & dismantle various types of complex manufacturing & support equipment with special focus on advanced troubleshooting on control systems, servo drives, motors, HMIs, & PLCs on complex high speed packaging lines, • Perform preventive maintenance & other proactive activities to monitor & maintain equipment condition, • Troubleshoot and repair of Pneumatic Control Systems, Allen Bradley PLC Systems, RSLinx, Process Control Instrumentation, 3 phase (480V) Circuits, Motor starters and controls, • Coordinate with other technicians, production personnel, engineering, management, & other stakeholders to communicate & plan maintenance activities, • Will provide support and substitute for EMT Lead on driving production goals; this includes training, coaching, and filling in for Machine Operators as needed, • Coordinate with equipment/service vendors for technical assistance, • Maintain safe, clean, & well-organized work areas, • Comply with regulatory, Keurig Dr Pepper, & departmental policies, procedures, & standards (especially safety), • Assist other maintenance technicians as priorities dictate, time allows, or directed., • Identify opportunities for maintenance or process improvement & drive recommendations to implementation or resolution, • Complete or assist with special projects as directed, • Starting rate of pay is $46.34 per hour., • A shift differential $0.35 per hour will also be provided for night shift., • High school diploma or general equivalency diploma (GED) preferred., • 2 years of experience working in maintenance in a large production facility., • 2 years of working knowledge troubleshooting and programming PLCs., • 2 years of working knowledge of mechanical systems. Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that’s proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law.

Job Description Bring more to life.Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?At Beckman Coulter Diagnostics, one ofDanaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.As a global leader in clinical diagnostics, Beckman Coulter Diagnostics has challenged convention to elevate the diagnostic laboratory’s role in improving patient health for more than 90 years. Our diagnostic solutions are used in routine and complex clinical testing, and are used in hospitals, reference and research laboratories, and physician offices around the world. Every hour around the world, more than one million tests are run on Beckman Coulter Diagnostics systems, impacting 1.2 billion patients and more than three million clinicians per year. From uncovering the next clinical breakthrough, to rapid and reliable sample analysis, to more rigorous decision making—we are enabling clinicians to deliver the best possible care to their patients with improved efficiency, clinical confidence, adaptive collaboration, and accelerated intelligence.Learn about theDanaher Business System which makes everything possible.The Senior Manufacturing Maintenance Mechanic is responsible for performing all routine production equipment maintenance and emergency repairs, maintaining spare parts inventory, performing troubleshooting/root cause analysis, and providing excellent customer service and support for our on-site employees and manufacturing operations.This position reports to the Sr. Manager Engineering/Maintenance/Facilities and is part of the Equipment Maintenance team located in West Sacramento, CA and will be an on-site role.In this role, you will have the opportunity to:Responsibilities include safely and effectively troubleshooting, diagnosing/repairing, and maintaining process equipment lines such as printing, filling, drying, packaging, glass washing, and autoclaving.Participate in and perform process equipment emergency and non-emergency repairs, scheduled preventive maintenance tasks, spare parts organization, part fabrication, and complete assigned work orders on time.Participate in and perform a multitude of tasks including (but not limited to) routine equipment maintenance, opening/closing work requests, completing work order required documentation, completing required training, participating in Kaizen events/initiatives, and completing all assigned work requests on time.The essential requirements of the job include:HS diploma or GED is required.2+ years of successful experience working as a Maintenance Technician/Mechanic in a manufacturing/production or industrial environment.Previous electrical/mechanical troubleshooting and repair experience is required. Must be able to safely and effectively troubleshoot, repair, and maintain process equipment. These repairs may include the use of basic hand tools as well as a mill, lathe, drill press, and/or welding equipment.Physical/Environment Requirements:Ability to lift, move or carry equipment up to 50lb as well as other physical requirements.It would be a plus if you also possess previous experience in:Manufacturing/Productionenvironment, medical device manufacturing and/or other FDA-regulated industry and certifications in Electrical, Mechanical, Welding, or other relevant job skills is preferred.Using a computer to send and receive e-mails, open and update work orders, enter timesheet information, and ability to learn and utilize computerized work order and PM systems (CMMS).Welding and metal parts fabrication.Beckman Coulter Diagnostics, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits atDanaher Benefits Info.The hourly range for this role is 27.02 – 47.22. This is the range that we in good faith believe is the range of possible compensation for this role at the time of this posting. This range may be modified in the future.This job is also eligible for bonus/incentive pay.We offer comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees.Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law.Join our winning team today. Together, we’ll accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life.For more information, visit Corporation and all Danaher Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law.The U.S. EEO posters are availablehere.We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact:.

Job Description SitelogIQ is a rapidly growing energy and facility services company focused on making buildings better. We provide planning, design, and management solutions for organizations that want efficient and sustainable building environments that are healthier and safer for their occupants. Our Site Superintendent Intern will work out of our West Division, located in Northern California with travel. This position will have the opportunity to take part in the on-site development of projects and day-to-day project progress. To be successful in this position, an individual will need to be self-driven person with an entrepreneurial spirit; unafraid of rolling up their sleeves to get things done. Solid decision-making skills are a must. Ideal candidate would reside in Northern California and willing to travel to project sites for a week at a time. Every effort is made to assign the closest personnel to the project nearest to their home. The following responsibilities are subject to change based on the needs of the company and employee interest level. Target Salary: $20-25 per hour and will include mileage reimbursement for travel in your personal vehicle. Site Superintendent Responsibilities • Review the SitelogIQ Project Safety Manual and program and implement as required on the assigned projects., • Walk site(s) daily to enforce safety and quality control guidelines are being followed., • Document “Catching Safety” opportunities in Procore., • Validate progress (in Procore) from contractor’s installation schedules from demo to completion., • Build a positive relationship with the Owner(s) of projects assigned., • Ensure projects are within project plan & specification scope., • Maintain up to date records of the projects during throughout the project(s) life cycle, within Procore., • Review monthly red line as-builts of each subcontractor and take the lead to acquire red line as-builts at the end of the project from all subcontractors., • Support and assist team members in throughout Project(s) life cycle: development/bidding, design, implementation, commissioning, and warranty phases., • Outstanding detail oriented and time management skills., • Availability for traveling on-site for duties or supervision as required which may require time afterhours or weekends., • Must be able to climb ladders and stairs, comfortably lift 40+ pounds, and must be able to work on your feet for extended periods of time. At SitelogIQ, we’re focused on creating a great environment for our team first so that it is more energizing and rewarding to focus on creating a great customer experience. That’s what we call a win-win. We partner with clients in K-12, higher ed, government, healthcare, multifamily housing, and industry to optimize energy efficiency, improve indoor air quality, address lighting, and improve the customer experience. With offices across the country, it’s rewarding to make a difference in the communities where our teammates live and work. NOTE: This job description is not intended to be all-inclusive. Employee may be asked to perform other related duties as required to meet the ongoing needs of the Organization. SitelogIQ is an Equal Opportunity Employer and participates in the E-Verify program. #LI-MS1

Shared Imaging is a privately held organization that has been committed to growing organically and has doubled our revenue in the past 10 years and is committed to having the best technology possible to help support our clients. We pride ourselves on our "White Glove" service model by delivering the best patient experience possible. Shared Imaging is looking to add an Imaging Field Service Engineer (PET/CT Specialty) to our technical operations team. Summary of Job Responsibility The Imaging Field Service Engineer - is a technically oriented service professional that proactively assists in servicing Shared Imaging's customer's PET/CT (Positron Emission Technology Computed Tomography) diagnostic imaging equipment. As a partner in the service delivery and customer management process, the role takes ownership of all technical account management delivery and service reporting. In this role, the Imaging Field Service Engineer will be responsible for meeting the daily service repair assistance of the PET/CT imaging equipment and driving customer satisfaction through service and relationship excellence. The qualified person will have strong self-directed job functions requiring strong PET/CT technical knowledge, preventative maintenance, system interconnectivity to external device knowledge with a professional demeanor to internal and external stakeholders. Essential Functions: • Manage vendor(s) service delivery processes in compliance with SI policies, • Maintain customer service requests and internal service records / reports within the internal platform, • Manage repair parts cycle times with the OEM. Including diagnosing, documenting major parts and part sub-components manufacturer, part number to enable alternative parts sourcing., • Utilizing the escalation process to resolve customer service delivery issues and conducting root cause analysis that will lead to effective problem solving, • Work as a member of the national and local team to provide efficient service delivery to all, • Identify "hidden growth opportunities" and participate in sales opportunities such as contract renewals and assist with promoting, supporting and implementing SI growth programs, • Perform Preventative Maintenance on equipment assigned and potentially perform first call repairs and functional system inspections, • Maintain daily communications with customers and/or Regional Operations Managers (ROM) or Regional Operations Supervisors (ROS) to ensure resolution and proper follow-up, leading to customer satisfaction, • Maintain tools and test equipment properly and ensuring they are calibrated, • Conduct and complete Preventative Maintenance on designated PET/CT diagnostic imaging equipment when tasked to do so, • Meet Health and Human Services and Environment Health and Safety requirements Minimum competencies, knowledge, skills, and abilities: • Previous experience with Siemen's PET/CT, and other OEM PET/CT's is highly preferred, • Excellent analytical and technical communication skills with the ability to communicate complex technical issues in an easy-to-understand manner, • Experience with Preventative Maintenance, as well as, diagnosing and repairing computer, mechanical, electromechanical, and/or electronic based PET/CT diagnostic imaging equipment in the Healthcare Industry, • Experience troubleshooting and responding to customer concerns in quality professional manner, • Experience interfacing with both internal team members and external customers as part of a solution-based service process, • Exceptional interpersonal skills, • Excellent written and verbal communication skills, • PC knowledgeable with demonstrated ability to use Microsoft products and intranet/internet applications Education, Experience and Travel • Associates Degree or higher education in Electronics Engineering or equivalent military education, • Minimum 4 years servicing PET/CT diagnostic imaging equipment or minimum of 10 years of experience in lieu of completed degree or military training, • Experience servicing Siemen's PET/CT equipment is highly preferred, • Experience with telecommunication systems, as well as DICOM and networking are preferred, • Travel to/from sites with imaging equipment regularly. Overtime, overnight and weekend travel is required when a PET/CT system is not able to scan patients and is considered hard down Other Requirements • Must hold a valid driver's license and have a driving record showing zero felony or DUI convictions and less than three moving violations in the previous three years., • Must be capable of carrying or pulling equipment up to 100 lbs (assistance available when lifting items over 125 lbs), • Carries or pulls up to 40 of test / tool equipment, • Frequent bends, stoops, twists, turns, and works in unusual positions using full body May work on ladders or scaffolding on occasion, • Potential exposure to hazardous physical, chemical, and biological agents existing in the healthcare environment We value our employees, and we want them to be healthy and happy. We offer competitive salaries, travel reimbursement and a diverse blend of benefits, incentives, and business practices and we are continually evaluating our offerings to ensure that Shared imaging is a truly great place to work! • Health, dental, and vision insurance, • Company paid dental (with applicable health plans), • 401k matching, • Company-paid life insurance and voluntary supplemental life insurance, • Company-paid short-term disability, • Voluntary long-term disability, • Flex PTO & paid holidays, • Wellness program with generous incentives open to all Shared Imaging Associates, • Employee Assistance Program, • Employee recognition programs, • Referral bonus program, • Job training & professional development The annual salary range for this role is $140,000 - $150,000/year, however, base pay offered may vary depending on geographic region, internal equity, job-related knowledge, skills, and experience among other factors. This position is also eligible for a performance-based merit increase annually. Candidates will be assessed and provided offers against the minimum qualifications for this role and their individual experience. We require that all Shared Imaging LLC employees have a completed background check and drug screen on file. Shared Imaging is committed to equal employment opportunity. The company offers a drug-free work environment to all qualified applicants without regard to race, color, religion, sex, age, national origin, sexual orientation, disability, marital status, veteran status or any other category protected by applicable law. Equal employment opportunity includes hiring, training, promotion, transfer, demotions and termination.

KGS Group is seeking a Mechanical Engineer to join our growing practice in Bellevue, Washington or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We’re different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we’re invested in our work and our people. Working with us means you’ll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you’ll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As a Mechanical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead technical teams and mentor junior staff, support production, and coordinate delivery of engineering work products with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You’ll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work involving turbines, generators, and their associated ancillary systems, as well as other balance of plant systems such as gates, hoists, cranes, pumping systems, lubrication systems, and other critical equipment at hydroelectric powerplants. You will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out site visits and inspections. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers, and you will also interface directly with clients. Key Responsibilities: • Design modifications to, or entirely new, mechanical systems related to dams, control structures, water retaining structures, and hydroelectric generating stations., • Execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control, and hydroelectric sectors., • Conduct site investigations, condition assessments, and provide design and construction support., • Mechanical engineering design and refurbishment of cranes, hoists, hydroelectric turbines, generators, and other balance of plant systems., • Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner., • Preparation and review of reports., • Work collaboratively with other disciplines to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met., • Edit and prepare design specifications., • Contribute to the development of the hydro-mechanical practice at KGS by assisting the US mechanical design lead by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks., • Perform other duties as assigned. About You To fill the role, we’re looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: • Minimum of a Bachelor of Science (BS) in Mechanical Engineering from an ABET accredited university. A post-graduate degree would be an asset., • Minimum of 7-15 years of experience in mechanical engineering., • Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states by comity through NCEES; or, if not already registered as a PE, would be able to obtain licensure within 1 year from date of hire., • Previous consulting experience is preferred, but not required., • Excellent verbal and written communication skills are required., • Must be self-motivated, and able to work independently with minimal supervision and manage several projects simultaneously., • Travel to project sites is usually limited but will be required at times depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated., • Must possess a valid driver’s license and the ability/willingness to undergo security clearance checks., • Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information., • Demonstrated experience in site investigations, condition assessments, design, and construction support are preferred. The salary range for this position is $110,000-$160,000 Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate’s experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

Job Description Superintendent: Are you looking for the next step in your construction project management career? Or, are you a mid-career construction management professional looking for the next big opportunity? Have you built significant experience in construction projects and are looking to expand your skill set? Essel is looking for a construction Superintendent with experience managing mid to large scale projects. The Superintendent will lead multiple projects in the following sectors: • Colleges / Universities, • K-12 Construction w/ DSA oversight, • Track project costs and complete project all change management, RFIs, and owner pay applications, • Oversee shop drawings and submittals, write subcontracts and purchase orders for projects, manage subcontractor relationships and conduct regular jobsite coordination meetings, • Minimum 10 years of experience in K-12 / College / University sectors, • Experience with DSA oversight / managed projects, • Professional Degree in construction management, architecture or a related field (mechanical or civil engineering, construction tech, interior design, business administration) is preferred, • Ability to negotiate, write and execute all subcontract agreements, • Willingness to relocate to or near Natomas, CA, • Strong communications skills, both written and verbal, • Technology: Proficiency with Microsoft Office, Microsoft Project, Bluebeam and Procore, • Must work well in a team environment and be committed to client service Industry competitive benefits

Job DescriptionDescription: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK’s ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Construction Manager to join our team in Sacramento, CA. In this role you will oversee daily telecom infrastructure projects across California, ensuring wireless and wireline builds are completed safely, on time, and to spec. This role coordinates field teams, vendors, and stakeholders while managing contractor performance and addressing risks. Why TAK? • Full Time, • Paid Bi-Weekly, • Compensation: $90K - $100K annually, DOE, • Full Benefits Package (Medical, Dental & Vision), • Paid Time Off, • Company provided vehicle, laptop, & phone, • 401(k) with Company Match!, • 25K Company Paid Life Insurance, • Independent Work & Team Collaboration, • Manage daily construction activities across multiple projects, • Supervise construction crews and subcontractors to ensure quality, compliance, and schedule adherence, • Conduct site walks, pre-construction meetings, safety audits, and closeout inspections, • Coordinate closely with permitting, engineering, real estate, and logistics teams to keep projects on track, • Track project milestones using company provided tools, • Coordinate material deliveries, equipment-staging and access logistics, • Support the Director of Construction in maintaining project budgets and schedules, • Serve as an on-the-ground escalation point for field issues; collaborate on resolution strategies, • Effectively communicate project status, risks, and resource needs to leadership and clients, • Ensure all work is performed in accordance with company safety protocols and applicable California regulations, • Document and verify completion of punch lists, redlines, and closeout packagesRequirements:, • 5+ years of hands-on experience in telecommunications construction (e.g., wireless, fiber, small cell, DAS), • Proven experience managing multiple concurrent site builds in a fast-paced environment, • Strong understanding of California regulatory requirements, site permitting, and utility coordination, • OSHA 10 or 30 Certification required, • Familiarity with major wireless carriers and their construction standards (AT&T, Verizon, T-Mobile, etc.) required, • Knowledge of fiber construction methods, including aerial and underground, • Experience managing vendor performance and enforcing contractual deliverables, • Experience with union and prevailing wage job sites preferred, • Proficiency in construction tracking software, • Excellent verbal and written communication skills, including client interaction and reporting, • Ability to work outdoors in all weather conditions, in tight or elevated spaces, and on varied terrain, • Physically able to lift/carry up to 70 pounds, climb and work on ladders (up to 28 feet), and perform tasks involving bending, reaching, twisting, and standing for extended periods, • Comfortable working in moderate to high noise environments and around mechanical, electrical, and power equipment, • Must utilize proper PPE and follow safety protocols, including for handling hazardous materials, • Willingness to work outside normal business hours as needed (including evenings, weekends, holidays, and overtime), • Must provide a valid government-issued photo ID for verification; a driver’s license is required if the role involves driving, • Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .

Job Description Join our Hazen team and make the world a better place providing exceptional client service in all things water® and superior technical solutions for our clients. Hazen is a creative, employee-owned company with minimal bureaucracy where employees thrive. Hazen has outstanding opportunities for motivated, talented people that enjoy teamwork and collaboration, client service, and solving our clients’ most difficult challenges. You will be supported by multiple mentors on projects and local office leadership. Hazen and Sawyer is seeking a Construction Manager (CM) to support the construction of water and wastewater treatment facilities and conveyance facilities located in the Great Bay and Sacramento areas. The CM will manage the construction, coordination, documentation and inspection activities for various water and wastewater facilities and pipeline projects in the Great Bay and Sacramento areas. Travel within the area may be required. Duties and responsibilities may include the following: • Reviewing and interpreting Contract Documents including project specifications and drawings., • Assisting in the review of RFIs and shop drawings prepared by the Contractor., • Preparing sketches and assembling data for the Design Engineer's use, • Coordinating and facilitating communication between the Contractor, the Design Engineer, the Facility Managers, and the Owner, • Managing the field inspection of Contractor's daily operations for compliance with contract documents., • Perform Q/C on CM operations., • Reviewing Contractor’s schedules, periodic pay estimates and managing the review of change orders, • Use of cloud-based software for project documentation such as PROCORE, Unifier e-Builder etc., • Other Construction and Project management activities as needed., • Must have bachelor’s degree in engineering, Construction Management or related field., • 5+ years relevant construction experience in heavy construction, mechanical and electrical construction, preferably in the water/wastewater industry, • Applicant must have a valid driver's license and clean driving record., • Good verbal and written communication skills, • Basic computer skills (Microsoft Office Suite) are required and ability to learn construction specific software use (i.e., PROCORE, E-Builder), • PE license is a plus

Job DescriptionWho We Are Power Storage Solutions is a leader in stored energy solutions for telecommunications and industrial applications. We are at the forefront of the battery industry, driving innovation and sustainability. Our team is dedicated to providing high-quality battery solutions that power the future. We have four facilities strategically located across the USA to enable our nationwide service operations and installation presence. The company is headquartered in Dallas, TX. With sales and power services throughout the USA and with unmatched experience in critical power backup and battery experience, Power Storage Solutions is the premiere solution for reliable power solutions, energy storage, UPS procurement, and DC power products. We continue to grow in our industry by ensuring all employees possess the following core competencies: product knowledge, customer focus, safe work habits, team player, engaged, ethical with strong communication skills. Who Are We Looking For? We are looking for an individual who is a self-starter, reliable, and looking to grow with us. The Field Specialist will participate in all aspects of installation projects, including construction of superstructure, iron work, cabling, and all aspects of installation and removal of batteries and associated chargers, control and distribution systems. The Field Specialist must possess the ability to understand, follow directions, and ultimately anticipate next steps. Adhering to safe practices and wearing required personal protective equipment (PPE) while presenting a professional work ethic and appearance during job performance and client interactions. The purpose of the position is to provide installation services while helping to resolve customer-related issues as defined by the specific quoted scope of work. The Field Specialist will assist the supervisor or on-site personnel to deliver customer requirements while supporting lead installers with mechanical construction tasks. Job Description • Responsible for projects' on-time performance, adherence to standard procedures, safety, and service interruption avoidance, quality, and customer service., • Accurate and timely reporting of job schedules, project time reporting, and expense reports., • Coordinates job scheduling in conjunction with material availability., • Develops project synopsis, job-specific operation summaries, cost reduction actions., • Develops technical capabilities of internal resources, administers all PCSS required policies including EEO, Safety, EPA, and human resource procedures for direct reports., • Supervise job-specific staff on assigned service/installation projects within specific regions as required., • Ongoing technical training to remain current with the state of the DC power/telecommunications technology base as it pertains to power services., • Continuous improvement techniques to achieve industry-leading installation processes, applications, and services to expand the customer base.Preferred Qualifications, • Experience with DC power installation/services specialist responsibility., • Broad installation/service experience encompassing field engineering, material coordination, site layout, troubleshooting, revenue enhancement, customer relations, safety management within the DC power industry, solid personnel skills, and personnel assessment., • Meet minimum customer-specific criteria for projects assigned., • Meet requirements of Level 3 installer as defined in Telcordia GR 1275 document. We are looking for a candidate who has experience, but it is not required. If you think that you meet the qualifications or have the drive and ambition for the position, please apply.

High school diploma or GED plus 5 years of controls engineering experience and 1 years of ICS cybersecurity experience OR bachelor's degree in electrical engineering, mechanical engineering, chemical engineering, Information Technology or Cybersecurity plus 3 years of controls engineering experience

Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods. Provides engineering information by answering questions and

Job Description Job Description: Hazen and Sawyer is seeking a senior wastewater engineer with at least 12 years of experience to join our Bay Area offices. Candidate to be involved with a wide range of wastewater infrastructure projects, focusing on treatment process design and construction. In addition to the technical requirements, the position requires experience with project management or the desire to grow into a project management role. Position will include client development and management, supported by our local offices. The position can be based in any of the Northern California offices from San Francisco, Concord, or Sacramento, however, it can serve across the northern California region depending on the expertise and the needs on projects and pursuits. Responsibilities: • Developing technical treatment strategies, selecting treatment processes, developing process design criteria, and delivering projects., • Supporting and developing proposal development., • Helping to identify, hire, supervise and mentor junior wastewater staff., • Direct coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Managing projects to meet client expectations, budgets, and quality requirements., • Following internal Hazen processes to ensure quality delivery of engineering projects for clients., • Technical responsibility for interpreting, organizing, executing, and coordinating assignments on small to medium projects., • Performing planning, studies, design, and support of projects through design, construction, and operation., • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams., • Experience in planning, design, and construction for water and wastewater treatment facilities., • Proficient in all MS Office based computer software., • Excellent writing, communication, and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies., • Self-starter with attention to detail., • Strong organizational skills., • Bachelor of Science degree in Environmental, Civil, Chemical or Mechanical Engineering.

Job Description Shared Imaging is a privately held organization that has been committed to growing organically and has doubled our revenue in the past 10 years and is committed to having the best technology possible to help support our clients. We pride ourselves on our "White Glove" service model by delivering the best patient experience possible. Shared Imaging is looking to add an Imaging Field Service Engineer (PET/CT Specialty) to our technical operations team. Coverage will be Sacramento, CA, Stockton, CA and the Northern CA area. Summary of Job Responsibility The Imaging Field Service Engineer (PET/CT Specialist) - is a technically oriented service professional that proactively assists in servicing Shared Imaging's customer's PET/CT (Positron Emission Technology / Computed Tomography) diagnostic imaging equipment. As a partner in the service delivery and customer management process, the role takes ownership of all technical account management delivery and service reporting. In this role, the Imaging Field Service Engineer (PET/CT Specialist) will be responsible for meeting the daily service repair assistance of the PET/CT imaging equipment and driving customer satisfaction through service and relationship excellence. The qualified person will have strong self-directed job functions requiring strong PET/CT technical knowledge, preventative maintenance, system interconnectivity to external device knowledge with a professional demeanor to internal and external stakeholders. Essential Functions: • Manage vendor(s) service delivery processes in compliance with SI policies, • Maintain customer service requests and internal service records / reports within the internal platform, • Manage repair parts cycle times with the OEM. Including diagnosing, documenting major parts and part sub-components manufacturer, part number to enable alternative parts sourcing., • Utilizing the escalation process to resolve customer service delivery issues and conducting root cause analysis that will lead to effective problem solving, • Work as a member of the national and local team to provide efficient service delivery to all, • Identify "hidden growth opportunities" and participate in sales opportunities such as contract renewals and assist with promoting, supporting and implementing SI growth programs, • Perform Preventative Maintenance on equipment assigned and potentially perform first call repairs and functional system inspections, • Maintain daily communications with customers and/or Regional Operations Managers (ROM) or Regional Operations Supervisors (ROS) to ensure resolution and proper follow-up, leading to customer satisfaction, • Maintain tools and test equipment properly and ensuring they are calibrated, • Conduct and complete Preventative Maintenance on designated PET/CT diagnostic imaging equipment when tasked to do so, • Meet Health and Human Services and Environment Health and Safety requirementsMinimum competencies, knowledge, skills, and abilities:, • Previous experience with Siemen's PET/CT, and other OEM PET/CT's is highly preferred, • Excellent analytical and technical communication skills with the ability to communicate complex technical issues in an easy-to-understand manner, • Experience with Preventative Maintenance, as well as, diagnosing and repairing computer, mechanical, electromechanical, and/or electronic based PET/CT diagnostic imaging equipment in the Healthcare Industry, • Experience troubleshooting and responding to customer concerns in quality professional manner, • Experience interfacing with both internal team members and external customers as part of a solution-based service process, • Exceptional interpersonal skills, • Excellent written and verbal communication skills, • PC knowledgeable with demonstrated ability to use Microsoft products and intranet/internet applicationsEducation, Experience and Travel, • Associates Degree or higher education in Electronics Engineering or equivalent military education, • Minimum 4 years servicing PET/CT diagnostic imaging equipment or minimum of 10 years of experience in lieu of completed degree or military training, • Experience servicing Siemen's PET/CT equipment is highly preferred, • Experience with telecommunication systems, as well as DICOM and networking are preferred, • Travel to/from sites with imaging equipment regularly. Overtime, overnight and weekend travel is required when a PET/CT system is not able to scan patients and is considered hard downOther Requirements, • Must hold a valid driver's license and have a driving record showing zero felony or DUI convictions and less than three moving violations in the previous three years., • Must be capable of carrying or pulling equipment up to 100 lbs (assistance available when lifting items over 125 lbs), • Carries or pulls up to 40 of test / tool equipment, • Frequent bends, stoops, twists, turns, and works in unusual positions using full body May work on ladders or scaffolding on occasion, • Health, dental, and vision insurance, • Company paid dental (with applicable health plans), • 401k matching, • Company-paid life insurance and voluntary supplemental life insurance, • Company-paid short-term disability, • Voluntary long-term disability, • Flex PTO & paid holidays, • Wellness program with generous incentives open to all Shared Imaging Associates, • Employee Assistance Program, • Employee recognition programs, • Referral bonus program We require that all Shared Imaging LLC employees have a completed background check and drug screen on file. Shared Imaging is committed to equal employment opportunity. The company offers a drug-free work environment to all qualified applicants without regard to race, color, religion, sex, age, national origin, sexual orientation, disability, marital status, veteran status or any other category protected by applicable law. Equal employment opportunity includes hiring, training, promotion, transfer, demotions and termination.

Job Description Position Summary We are seeking a motivated Mechanical Project Engineer with an HVAC background to support the planning, coordination, and execution of mechanical construction projects. In this role, you’ll work closely with Senior Project Engineers and Project Managers to meet project milestones and deliverables across various phases of construction. This is an ideal opportunity for someone who is detail-oriented, collaborative, and looking to grow within the mechanical contracting industry. Key Responsibilities * Assist Sr. Project Engineers and Project Managers with day-to-day project management tasks. * Support the successful execution of projects in alignment with approved budgets, timelines, and quality standards. * Manage and assemble key project documentation, including submittals, RFIs, specifications, change orders, and purchase orders. * Coordinate material deliveries and monitor project schedules to ensure timely completion of deliverables. * Work on multiple projects simultaneously at different stages of construction. * Contribute to budget tracking, manpower planning, and procurement coordination. * Collaborate effectively with internal and external teams, including general contractors, field staff, vendors, and union labor. * Support compliance with company policies, safety regulations, and project procedures. * Provide general project support as directed by senior staff. Qualifications * High school diploma or GED required; a bachelor’s degree in Construction Management or Mechanical Engineering is strongly preferred. * Minimum of 2–5 years of experience in mechanical or HVAC-related project engineering. * Strong verbal and written communication skills; ability to clearly communicate with clients, engineers, detailers, and field personnel. * Proficiency in Microsoft Office Suite (Word, Excel, Outlook) and Bluebeam. * Willingness to learn project management platforms such as Procore, Trimble, PlanGrid, or other contractor-specific software. * Strong organizational skills with the ability to manage priorities and meet deadlines under pressure. * Ability to work both independently and as part of a collaborative project team. * Professional demeanor with a positive attitude and a strong sense of accountability. Physical & Work Requirements * Ability to safely and successfully perform essential job functions in accordance with ADA, FMLA, and other applicable standards. * Must be able to maintain regular and punctual attendance. * Occasional visits to job sites may be required.

Job Description What you get to do: • Calculate various statistical data - quantity take-offs, material price lists, labor costs per man-hour, equipment, etc., • Assist in the monitoring of conceptual estimates with actual cost data., • Research historical data (purchase orders, subcontracts, productivity analysis reports, etc.) and compile summary reports to develop guidelines and precedence for future estimates., • Support developing project update and bid package estimate documents., • Currently enrolled at an accredited college or university as a Junior or Senior in an undergraduate program. Preferred majors/concentrations in Construction Management, Mechanical Engineering, Civil Engineering, or related fields. Evidence of high academic achievement with current or prior elected leadership experience preferred. Passion and desire to work in the construction industry. Prior work experience, internship, or trade experience preferred, but not required., • Proficiency with Microsoft Office 365 and ability to work optimally with minimum supervision., • A valid driver’s license may be required. Individuals in this role may be subject to an annual Motor Vehicle Records check. The outcome of any MVR checks conducted may negatively impact the persons’ ability to participate in any vehicle program provided by the company, including but not limited to the ability to drive a personal vehicle on behalf of The Boldt Company or rent a vehicle through for business travel purposes. While performing the duties of this job, the employee is occasionally required to position objects and operate tools or controls. Employee occasionally uses computer keyboard. The employee is occasionally required to position self to maneuver in confined or awkward spaces. The employee regularly is required to remain in a stationary position and move to access people or machinery or workspaces. Employee is occasionally required to ascend and/or descend a ladder or stairs to reach work areas. The employee must regularly move up to 20 pounds and occasionally move up to 50 pounds. The employee is regularly required to travel (as vehicle driver and as passenger on various modes of transportation) and frequently performs work on-site at construction work sites. Specific abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Employee views computer monitor regularly. The employee is required to be able to effectively communicate while on the job site and throughout the completion of duties. The working conditions of this position requires the employee to work both inside and outside in heat/cold, wet/humid, and dry/arid conditions. Frequently required to use personal protective equipment to maintain safety and prevent exposure to harmful materials. The environment for which this position functions may be exposed to prolonged loud noises and may contain scents and fragrances. May be requested to work overtime and weekends. What we can offer you: As an employee-owned organization, along with a culture built around safety and team collaboration, we offer employee benefits including 401K, wellness resources, including a health mentor, health assessments, wellness challenges and life care. You will have equal access to opportunities and resources at all levels of the company and can participate in diversity, equity, and inclusion training programs. Intern’s hourly wages are based on relevant previous internship experience. The range is $25 to $29 per hour. The Boldt Company is an Equal Opportunity Employer. Disclaimer: This job description is intended to be a summary of the primary essential duties and responsibilities of this position. The job description is not intended to be inclusive of all duties an individual in this position might be asked to perform or all the qualifications that may be required either now or in the future. Other duties, responsibilities and activities may be assigned or changed at any time.

Job Description What We Do At Terabase Energy, we believe that digitalization and automation will drive the next wave of innovation and cost reduction in large scale solar. To fully unlock the potential of this opportunity, Terabase is developing an interconnected software and construction automation platform. We work alongside project developers, owners, and engineering & construction firms to support the design, optimization, and construction of huge solar projects around the world. Our team is a blend of solar-industry veterans and novices, thought-leaders, dreamers, software, electrical and mechanical engineers, coders, product managers, project managers, sales and marketing professionals. Terabase Energy is a well-funded scale-up headquartered in Berkeley, California, with several other offices in the US and around the world. The Role We are seeking a dynamic and experienced Product Director, reporting to the SVP of Product, to lead the development and growth of Terafab, our flagship robotic platform for solar power plant installation. This role requires a strategic thinker who is passionate about renewable energy, robotics, and product innovation. As the Product Director, you will own the product roadmap, collaborate with cross-functional teams, support the scale-up of Terafab and ensure it exceeds market expectations. Location: Hybrid, with 3 days in our Davis/Woodland, CA office or Berkeley, CA office. Travel up to 25%. Responsibilities Product Strategy and Roadmap: • Develop and maintain a clear product vision and strategy for Terafab., • Define and prioritize the product roadmap based on market research, customer feedback, and business goals., • Identify and evaluate emerging trends in renewable energy and robotics to guide product innovation. Stakeholder Collaboration: • Collaborate with OEMs and other technology partners to integrate solutions and drive innovation., • Work closely with engineering, design, sales, and marketing teams to ensure successful product development and launch., • Gather and synthesize input from customers, partners, and internal stakeholders to inform product decisions., • Act as the primary advocate for Terafab within the organization and with external stakeholders Product Development: • Oversee the development lifecycle of Terafab, from concept to deployment., • Collaborate with engineering teams to define technical requirements and ensure feasibility., • Conduct regular reviews to monitor progress and address any challenges. Market and Customer Insights: • Conduct market research and competitive analysis to understand customer needs and market opportunities., • Develop detailed customer personas and use cases to guide product design and development., • Gather feedback through user testing, surveys, and direct engagement to improve the product. Performance Metrics and Reporting: • Develop and maintain Terafab cost and value models, and industry baseline model., • Define and track key performance indicators (KPIs) to measure the success of Terafab., • Provide regular updates to leadership on product performance, challenges, and opportunities. Go-to-Market Strategy: • Collaborate with marketing and sales teams to develop positioning, messaging, and launch plans for Terafab., • Support sales efforts by providing product expertise and creating customer-facing materials. This is a rare opportunity to help scale a disruptive hardware + software platform supporting the global energy transition. If you're passionate about building great tech solutions with an impact, we’d love to connect with you. Requirements Minimum Qualifications • Bachelor’s degree in engineering (mechanical, electrical, robotics, industrial engineering, or related field), • 7+ years total professional experience in product management, engineering, or project management, with at least 4 years in product management for hardware+software solutions., • 3+ years in robotics, automation, or autonomous machinery, ideally in construction, agriculture, or manufacturing., • Direct exposure to large-scale solar power plant construction (utility-scale EPC, developer, or technology supplier), including knowledge of racking, module installation, site preparation, and commissioning., • Familiarity with safety regulations and compliance for heavy machinery and autonomous systems (OSHA, ISO, CE Marking)., • Proven track record of taking industrial or field-deployed products from concept to market, including pilot deployments, iterative design cycles, and scaling to production., • Experience working closely with multi-disciplinary engineering teams (mechanical, electrical, controls, software, AI/computer vision)., • Ability to translate field operations needs into clear technical requirements and prioritize for maximum ROI., • Understanding of robotics technologies: perception (cameras, LiDAR, GNSS), autonomy stacks, actuation, teleoperation, safety systems., • Strong grasp of B2B industrial product lifecycles – from concept validation through launch and after-sales support., • Skilled in data-driven product decisions, including business case development, cost-benefit analysis, and performance KPIs., • Comfortable working in the field with customers, operators, and construction crews, as well as in the office with engineering and executives., • Strong stakeholder management skills, balancing the needs of customers, engineering, operations, and business development., • Excellent communicator who can bridge technical details and business strategy., • Resilient and adaptable in fast-paced, evolving environments., • Demonstrated change management ability to drive adoption of robotics in conservative, high-risk industries. Preferred Qualifications Compensation And Benefits The anticipated salary for this role will range between $170,000 and $ 190,000 annually. Our salary ranges are determined by role, level, and location. Within each posted range, individual pay is determined (and may be greater or higher), dependent on work location and additional factors, including job-related skills, experience, and relevant education or training. Terabase offers competitive compensation along with a comprehensive benefits package, including: • Generous time off and holiday policy, • Remote flexibility, • Flexible time off, • Comprehensive benefits package, • Career progression, • 401k match, • Stock options, • Home office set up allowance, • And much more! Terabase is an equal opportunity employer. We recruit, hire, employ, train, promote, and compensate individuals based on job-related qualifications and abilities. We strongly encourage people of all backgrounds to apply. We do not discriminate for any reason including race, color, sex, gender, age, religion or religious creed, national origin, ancestry, citizenship, marital status, sexual orientation, gender identity, gender expression, genetic information, physical or mental disability, military/ veteran status, or any other characteristic protected by law. We offer a welcoming and inclusive environment in service to one another, our products, the diverse consumers we represent, and the communities we call home. Principles only. This role is not open to receiving agency candidates, and any contingent submissions will not be considered. Terabase Energy does not utilize third-party recruitment agencies. Please contact our Recruiting team at with any staffing-related inquiries.

Job Description Are you looking for the next step in your construction Project Manager / Project Engineer career? Or, are you a mid-career construction management professional looking for the next big opportunity? Have you built significant experience in construction projects and are looking to expand your skill set? Essel is looking for construction Project Managers / Project Engineers with experience managing mid to large scale projects. The Project Manager / Project Engineer could lead multiple projects in the following sectors: • Multi Family, • Ground Ups, • Tentative Improvements, • Colleges / Universities, • K-12 Construction w/ DSA oversight, • Review plans and specs to ensure accuracy, prepare General Conditions, and establish baseline schedules for each subcontractor or self-performing team, • Track project costs and complete project all change management, RFIs, and owner pay applications, • Oversee shop drawings and submittals, write subcontracts and purchase orders for projects, manage subcontractor relationships and conduct regular jobsite coordination meetings, • Minimum 3 - 5 years of experience in K-12 / College / University sectors, • Experience with DSA oversight / managed projects, • Professional Degree in construction management, architecture or a related field (mechanical or civil engineering, construction tech, interior design, business administration) is preferred, • Ability to negotiate, write and execute all subcontract agreements, • Strong communications skills, both written and verbal, • Technology: Proficiency with Microsoft Office, Microsoft Project, Bluebeam and Procore, • Experience with CMAR and/or Design/Build delivery method, • Must work well in a team environment and be committed to client service Industry competitive benefits

Job DescriptionDescription: Air Treatment Corporation is a dynamic, collaborative work environment. We understand the expectations of high–quality customer service, therefore we actively search and promote a cohesive team that is formulated to exceed expectations. We are devoted to the growth of our employees and look to provide opportunities for advancement from within, while providing a robust benefit package to all of our team members. We are currently looking for candidates for our Sacramento location. Inside Sales Engineer act as a liaison between the Sales Engineers, clients and manufacturers. Constant communication is required to provide general information, service, maintenance, and repairs updates related to the different stages of the product/project. Requirements: Pre-Bid Duties: • Review bid calendars from customers., • Identify project opportunities to bid., • Perform takeoff - including interfacing with customers as necessary to collect relevant bid documents, plans and specifications., • Use multiple factory software tools to create equipment selections., • Communicate with factories for special options and pricing., • Generate quote letters and price summaries based on customer requests / plans and specifications., • Create submittal documents for various products., • Work with Sales Engineers to gain approval for submittals., • Enters orders to factories., • Enter stock orders in ATC CRM., • Relay shipping information between factory and customer., • Interact with credit team and CRM coordinators as necessary., • Track orders/shipments as necessary., • Coordinate equipment startup requirements with ATC Service department., • Assemble project closeout documents., • Process warranty claims with manufacturers., • Process and track RMAs with customers and manufacturers., • Provide engineering support as needed., • Support for ATC stock orders., • Attend jobsite and/or customer visits to assist Sales Engineers., • Attend in-house factory training, ATC trainings, factory/webinar and online trainings., • Train fellow ISEs upon attending factory training sessions., • Be knowledgeable of locations for factory literature and technical resources., • Keep current with factory software versions., • Strong technical HVAC background., • Excellent verbal communication skills, demonstrating tact and diplomacy., • Excellent interpersonal and customer service skills., • Excellent organization skills and attention to detail., • Proficient in time management and ability to meet deadlines on assignments., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift 15 pounds at times. We commit to fair hiring and policies and we want you to join a team that celebratesauthenticity and empowers new, diverse perspectives.

Job Description Early Career Mechanical Engineer VPE Thermal, a subsidiary of Vacuum Process Engineering, is a world-renowned leader in microchannel heat exchanger design and manufacturing. Our company serves a wide range of industries with commercial products including power generation, chemical processing, oil/gas, nuclear and renewable energy with state-of-the-art heat exchangers. In addition to commercial products, we maintain a strong culture of internal R&D with exciting projects using cutting edge manufacturing technology and design/analysis tools to invent the heat exchangers of tomorrow. Our current team at VPE Thermal is offering an opportunity for an early career engineer with a strong background in solid mechanics, fluid dynamics, and heat transfer to join a rapidly growing company with significant career advancement opportunities. As an addition to the team, you will have the opportunity to learn from experts in the field with decades of experience and draw on your own background to contribute to projects that result in hardware that will go into service. Pay Range: 80-115K (depending on experience) Job Description: As a mechanical engineer at VPE Thermal, your primary role will revolve around taking conceptual designs from a senior engineer and turning them into hardware. On any day you may be asked to generate detailed engineering drawings, perform code calculations, document design information in a report, develop a manufacturing plan, procure items in a bill of materials, contract work with an outside shop, or anything in between. Required Experience: • Bachelor’s degree in engineering from accredited four-year college or university, • Course work in solid mechanics, thermodynamics, heat transfer, and fluid dynamics, • Computer aided design (CAD) from construction of a 3D model to detailed engineering drawings, • Document manufacturing plans, work instructions, design information, and research findings, • Basic project management including quoting, scheduling, budgeting, and execution, • Manage the tasks and interface with technicians (welders, machinists) or subcontractors, • Basic manufacturing processes including cutting, milling, forming, and welding of stainless steel Desired Experience: • Master’s degree with advanced coursework and/or research in solid mechanics and heat transfer, • Prior work using codes such as ASME BPVC, B31.3, B31.1, B16.9, • Ability to construct FEA models and interpret results to make design decisions, • More than two years working in high paced manufacturing environment, • Prior work experience in ISO/AS9100 environment, • Proven track record of interfacing with customers to deliver projects on time and within budget, • Interpret and deliver products adhering to customer design specifications, • Identify and diagnose issues with root cause analysis

Job DescriptionDescription: Tesco Controls’ core business is designing and building process control systems and power solutions for municipalities and industrial clients to keep critical infrastructure operating efficiently. As a full-service Systems Integrator and Original Equipment Manufacturer (OEM), we design, engineer, manufacture, program, and integrate electrical, power, and process control systems for water/wastewater, transportation, power, and renewable energy facilities. We help clients optimize operations, increase overall efficiency, and reduce operating costs. (Ranked top 12 by System Integrator Giants List 2023). We employ experts in every control discipline. TESCO’s unique ability to manufacture custom solutions and design and commission equipment, power and control systems provides clients with well-designed systems that work as intended. Job Summary: Under direct supervision assist in the design and execution of Engineering scope. This includes specification reviews, development program timelines and reports, design reviews, simple mechanical designs, documentation packages, preproduction builds and transfers to production. Provide entry level technical support on basic, stand-alone engineering assignments under direct supervision. Using prescribed methods, perform specific and limited portions of a broader assignment of an experienced engineer. Tesco Controls is an Equal Employment Opportunity Employer. TESCO provides equal employment opportunities to all qualified applicants without regard to race, sex, sexual orientation, gender identity, national origin, color, age, religion, protected veteran or disability status, or genetic information. (Compliant with the new VEVRAA and Section 503 rules) Requirements: Essential Functions: • Perform routine engineering work requiring application of standard techniques, procedures and criteria, • Assist in the review and approval of contractor plans, including goals and objectives, work breakdown structure, detailed scope descriptions, detailed schedules, risk management approach, and budgets, • Produce quality work products, which meet or exceed customer expectations, and conform to TESCO standards and procedures, • Clear understanding of project requirements and specifications; scope, budget, schedule and expectations set by the Project Engineer and Project Manager, • Obtain input from internal sources on jobs that may have similar scope and specifications., • Provide input to others as requested concerning their project needs, • Provides technical direction, serves as a point of contact or business liaison, prepares briefings for senior management and assists in problem resolution specific to the program/project, • Participates in project teams and all activities related to the development of new products, • Review TESCO’s standards and guidelines; stay current and apply them; get peers to review work whenever possible, • Complete task assignments within established budgets and schedules, • Monitor your own progress against your budget and schedule, • Notify Project Engineer and Project Manager of budget and schedule impacts and problems, • Explain project specifications in a clear and concise manner, • Ability to read and understand schematics, • Attend formal training programs, review journals and other publications related to the field help develop new skills or improve existing skills, • Ability to design, and understand aspects of electrical components, equipment, and machinery, • Bachelor of Science degree in Electrical Engineering (BSEE), • Knowledge of MS Office (Word, Excel, Outlook, Access) and Adobe Acrobat, • Thorough knowledge and understanding of electrical/electronic and mechanical theories, • Experience in electrical/electronic design with current circuit technology and processes (analog, digital and/or high voltage design) is preferred, • Light physical effort equal to frequent lifting or moving of lightweight materials, • Work performed in an office environment, • Work performed in production/ manufacturing environment Tesco Controls is an Equal Employment Opportunity Employer. TESCO provides equal employment opportunities to all qualified applicants without regard to race, sex, sexual orientation, gender identity, national origin, color, age, religion, protected veteran or disability status, or genetic information. (Compliant with the new VEVRAA and Section 503 rules)

Job DescriptionCompany Description About TOMRA TOMRA Food is a multinational organization and a leading provider of sensor-based sorting, peeling and integrated post-harvest solution for the food industries. Transforming global food production to maximize food safety and minimize food loss by making sure Every Resource Counts™, has been our strength for over 50 years. TOMRA Food designs and manufactures sensor-based sorting machines and integrated post-harvest solutions for the food industry, using the world's most advanced grading, sorting, peeling and analytical technology. The company's mission is to enable its customers to improve returns, gain operational efficiencies, and ensure a safe food supply via smart, useable technologies. TOMRA Food is a member of the TOMRA Group founded in 1972 that began with the design, manufacture, and sale of reverse vending machines (RVMs) for automated collection of used beverage containers. Today TOMRA provides technology-led solutions that enable the circular economy with advanced collection and sorting systems that optimize resource recovery and minimize waste in the food, recycling, and mining industries. This role is within the TOMRA Food division. At TOMRA, we want people to innovate, exhibit passion in their work and be responsible. We encourage the freedom to innovate and take risks that result in breakthroughs that challenge the status quo. We thrive off passion that always focuses and commits to meeting success. We demand a responsible and safe mindset that takes care of our customers, products and fellow employees. Job Description We are currently seeking a Senior Commissioning Engineer to join our US-based team. In this hands-on role, you will be responsible for installing, tuning, and servicing our cutting-edge food sorting equipment at customer sites across North America and globally. This role is ideal for someone who enjoys travel, problem-solving, and creating outstanding customer experiences. Key Responsibilities • Install new or modified equipment at customer facilities to ensure full functionality according to specifications., • Perform mechanical, electrical, electronic, and optical tuning and setup., • Analyze, evaluate, and independently diagnose equipment problems., • Conduct customer training on system use and basic maintenance., • Perform preventive maintenance and service on installed equipment., • Prepare and submit applicable field service documentation., • Manage assigned tools, test equipment, and technical documentation., • Ensure all tasks are performed with a strong commitment to safety and customer satisfaction.Qualifications, • Degree or certification in Electrical, Electronic, Automation, Mechatronics, or Industrial Engineering preferred., • 5+ years of experience in field service, system installation, or commissioning of large capital equipment., • Knowledge of computer hardware and system setup., • Understanding of analog/digital circuits and electrical power systems., • Experience with PLC circuits and troubleshooting., • Proficient with test equipment (oscilloscopes, voltmeters, etc.)., • Ability to read electrical schematics and AutoCAD drawings., • Proficiency with Microsoft Office (Word, Excel, PowerPoint)., • Strong problem-solving skills; ability to work on complex, diverse technical issues., • Excellent communication skills and professionalism in customer-facing settings., • Proven ability to build effective working relationships with internal and external stakeholders., • Comfortable working in food processing plants, farms, cold storage facilities, and extreme temperatures (indoor/outdoor)., • Able to lift up to 80 lbs, work in confined spaces, and frequently bend, kneel, and stand., • Ability to distinguish the full range of colors in the color spectrum., • No major food allergies that would interfere with job performance., • Willingness and ability to drive long distances and travel extensively (domestic and international)., • Must hold or be able to obtain a valid passport and driver's license with no restrictions., • Position requires travel of around 70% of the time. Additional Information Why work for us: • You will have long-term career opportunities, with a globally renowned company and the following:, • Strong benefits offering with medical, dental and vision plan options that cover premiums at 100% for employees., • Be part of a renowned Silver Level 2023 Cigna Healthy Workforce Winning organization., • Healthy PTO policy with 31 days annually (sick, vacation, holiday) which increases with each year of seniority., • Be part of a mission to transform how we all obtain, use and reuse the planet’s resources to enable a world without waste., • Inclusive company culture that values diversity, well-being and strong camaraderie among our teammates., • Global career opportunities with a strong record for promoting internally., • Professional training and development: We are passionate about people and seeing them succeed. TOMRA is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines.

Job Description Job Title: Quality Assurance Technician, Lead Company: X-Bow Systems Location: This position is an on-site position at one of X-Bow's facilities About Us: X-Bow Systems is a cutting-edge aerospace technology company focused on revolutionizing propulsion systems for space exploration and defense applications. Our team of innovative engineers and scientists is committed to pushing the boundaries of what's possible in rocket propulsion. As we continue to expand our operations, we are seeking a talented and driven Quality Assurance Technician, Lead to join our team. JOB DUTIES AND RESPONSIBILITIES: Successful candidate will work independently to perform a wide range of quality inspection tasks. • CMM and portable CMM inspections., • Create inspection reports from engineering drawings and shop documentation, • Perform Quality Process Assessments, • Perform visual, in-process and final dimensional inspections on tightly toleranced piece parts, subassemblies and final assembly., • Perform required inspections based on knowledge and experience and/or in accordance with procedures and planning documentation., • Perform required inspections using standard measurement instruments. POSITION REQUIREMENTS: • Technical strengths in processing, operations, and inspection. Possess the ability to plan and organize work in order to accomplish assigned tasks while maintaining attention to detail., • Interpret drawings and specifications. Strong working knowledge and understanding of GD&T and AMSE Y14.5., • Perform certification review on supplier documentation., • Be strategic in the identification of technical needs and solutions coupled with a strong program execution focus., • Possess excellent communication skills and effective interface with team members, suppliers, customers, and both technical and non-technical personnel., • Ability to record detailed information accurately, timely and follow instructions. QUALIFICATIONS AND SKILLS • Bachelor's Degree or High School Diploma; 8+ years of related work experience., • Excellent shop math skills and advanced trigonometry., • A strong understanding of standard Mechanical Inspection techniques and tools., • Experience with ISO 9000/AS9100 Quality Management System., • Experience with Continuous Improvement techniques., • Computer skills - MS Office, • Ability to operate a CMM/ portable CMM., • Self-starter with the ability to work through an issue to closure Job Posted by ApplicantPro

Job DescriptionDescription:Air Treatment Corporation is a dynamic, collaborative work environment. We understand the expectations of high–quality customer service, therefore we actively search and promote a cohesive team that is formulated to exceed expectations. We are devoted to the growth of our employees and look to provide opportunities for advancement from within, while providing a robust benefit package to our team members. The Service Manager plays a pivotal role in ensuring high levels of customer satisfaction, managing service intake, quoting, financial oversight, and the successful completion of service jobs. You will maintain existing processes while introducing strategies to handle new workloads, all while focusing on delivering exceptional customer service. Project Management: • Manage the scheduling of service requests to ensure timely quoting and execution., • Oversee the daily distribution of Xoi scopes., • Coordinate all internal startup scheduling as part of project duties., • Monitor project budgets, including forecasting, tracking and reporting expenditures., • Attend budget meetings capturing commission escalations and how they impact the business and overall deliverables., • Ensure HVAC service jobs are completed to a high standard, maintaining a focus on both quality, safety and customer satisfaction., • Collaborate with field technicians to support job execution and address on-site needs., • Oversee daily financial management of service projects, including independent quoted work., • Co-manage technician schedules to ensure optimal resource allocation and productivity. While supporting technicians training and development for growth., • Lead existing processes while implementing new workload distribution strategies. Knowledge of quality assurance and process improvement techniques ensuring cross-functional collaboration., • Review technical documents to ensure they are accurate and compliant with industry standards. Approving daily work reports for accuracy., • Foster and maintain strong relationships with clients, vendors and team members., • Identify opportunities for improvements and implement best practices while ensuring compliance with company policies and customer quality standards., • Participate in relevant manufacturer councils and industry events to stay informed about trends, innovations, and new product developments, and bring valuable insights back to the organization. Requirements:, • Excellent organizational skills and meticulous attention to detail, with a commitment to deliver high-quality work., • Proficient in Microsoft Office Suite (Excel, Word, Outlook)., • Ability to work independently and as part of a team while demonstrating strong team management skills., • Ability to manage multiple projects simultaneously and prioritize tasks effectively, • Excellent written and verbal communication and customer service skills., • Technical Degree, Bachelor's degree in Mechanical Engineering, or HVAC Engineering or a related field experience., • Minimum 5+ years of experience in the Commercial HVAC Industry., • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 25 pounds at times., • Ability to work on construction sites and stand for extended periods of time., • Ability to ascend and descend ladders., • Ability to withstand different ambient conditions (e.g., heat, cold, humidity). At Air Treatment Corporation, we are committed to growth, innovation, and excellence. As leading experts in HVAC & R solutions, we recognize that the success of our team drives the success of our company. This is echoed in our commitment to a workplace built on fairness, professionalism, and opportunity, ensuring that every team member is valued. Join our team and contribute your unique skills and perspectives to help us continue delivering industry-leading solutions.

Job DescriptionDescription: We understand some people want a sense of purpose. A place where you feel you’re helping the environment and community you live in. For others, it’s the culture that excites them. A place where you enjoy working and can grow professionally. At Tesco Controls, we believe you can have it all, and we demonstrate that daily! Our total rewards package includes career advancement and training opportunities as well as our medical/dental/vision coverage for your health and well-being. Our Flexible Spending Account, company paid Life Insurance and 401(k) with company match recognize the desire for financial security. Our wellness program and perks like company sponsored events, vacation & holiday pay, employee recognition and appreciation events, create a sense of community and support our mental health. Tesco Controls’ core business is designing and building process control systems and power solutions for municipalities and industrial clients to keep critical infrastructure operating efficiently. As a full-service Systems Integrator and Original Equipment Manufacturer (OEM), (Ranked #1 System Integrator focused on Water/Wastewater and #12 overall on the Global System Integrator Giants List 2023). We design, engineer, manufacture, program, and integrate electrical, power, and process control systems for water/wastewater, transportation, power, and renewable energy facilities. We help clients optimize operations, increase overall efficiency, and reduce operating costs. We employ experts in every control discipline. TESCO’s unique ability to manufacture custom solutions and design and commission equipment, power and control systems provides clients with well-designed systems that work as intended. Tesco Controls is an Equal Employment Opportunity Employer. TESCO provides equal employment opportunities to all qualified applicants without regard to race, sex, sexual orientation, gender identity, national origin, color, age, religion, protected veteran or disability status, or genetic information. (Compliant with the new VEVRAA and Section 503 rules) Job Summary: • Produce mechanical and electrical drawings from sketches, check prints and information provided by others, • Research information from reference sources and assist with the design process, • Dimensioning and revision control, • Interact with internal departments; Engineering, Test and Production, • Recommends alterations to development and design to improve quality of products and/or procedures., • Develop drawings for electrical systems using AutoCAD, • Review shop drawings and assist with general production services and production schedule, • Able to simultaneously organize and successfully execute multiple project responsibilities, • High school diploma and AutoCAD work experience or certification, • At least 1-2 years experience, • Possess good communication and interpersonal skills, and the ability to interact with all levels of management, clients, and vendors, • Ability to work in a fast-paced manufacturing environment, • Basic understanding of power distribution and control logic, • Proficiency in Microsoft Office Suite, familiarity with AutoCAD Electric software, • Knowledge of MS Office (Word, Excel, Outlook, Access), • Work performed in an office environment, • Work performed in production/ manufacturing environment

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin? Committed. Innovative. Engaged. If you're looking to take career to the next level and work with some of the best and brightest in the industry, we want to hear from you. We are an organization built on integrity. We have a culture that empowers people, embraces diversity, and inspires everyone to do their best. Rosendin is one of the largest electrical contractors in the United States employing over 7,000 people. We are the largest EMPLOYEE-OWNED company in the industry which means you will be a company owner too and have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success which means you benefit tremendously. YOUR NEXT OPPORTUNITY: The Engineer I is an entry-level engineering position and is expected to learn and develop competency in the Essential Duties and Responsibilities. Part of the responsibility will be to provide technical engineering design, consultation, information, and assistance to internal and external customers under the direct supervision of the Engineering Team Lead or Manager to ensure that the project complies with all engineering standards. WHAT YOU'LL DO: • May oversee or collaborate with Designers assigned to your work or team. Review, comment, and process equipment and system submittals. * Perform coordination between architectural, structural, mechanical, and plumbing processes and all electrical trades. * Prepare designs, check, and specify power, lighting, and auxiliary systems. * Develop power single-line diagrams. Develop and model short circuits and over current protection device coordination studies. * Coordinate your work with the project specifications or equipment buy-out. * Visit job sites to field survey existing electrical conditions under supervision. * Become familiar with engineering analysis programs to analyze loads, lighting levels, and short circuit currents under the supervision of a senior engineer. * Participate in project team meetings. May interface with various team members, architects, and mechanical contractors/engineers. * Work closely with the engineering supervisor to understand design criteria and budgetary issues. * Assist and develop skills with drawing interpretation problems, conflicts, interferences, and errors. * Assist with the review of plans and technical specifications, contract documents, and estimates under the supervision of a senior engineer. * Assist senior engineers with field observations, design interpretations, and design updates during construction. * The duties and responsibilities describe this position's general nature and scope of work. This is a partial listing, and other responsibilities will be assigned based on the position's role within the business unit. WHAT YOU BRING TO US: * Bachelor's degree in engineering, architectural engineering, construction sciences, or equivalent experience. * Can be a combination of education, training, and relevant experience COMPETENCIES: * Teamwork * Productivity * Strategic thinking WHAT YOU'LL NEED TO BE SUCCESSFUL: * Ability to learn Engineering Analytic programs for short circuits, over current coordination, and arc flash mitigation programs, e.g., SKM, E-Tap, etc. * Develop familiarity with codes, and energy efficiency requirements * Ability to learn and become competent in Autodesk, Microsoft Office (Outlook, Word, Excel, etc.), and Illuminance software. * Ability to manage multiple tasks under the supervisor's direction. * Ability to work to meet deadlines and adapt to changing requirements with a positive attitude * Effective oral and written communication skills as required for the position * Ability to be self-motivated, proactive, and an effective team player * Ability to interact effectively and professionally. TRAVEL: * Up to 10% (Does not include local field visits) WORKING CONDITIONS: * General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning * Noise level is usually low to medium * Occasional lifting of up to 40 lbs. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401k * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Pay Range $79,600.00-$104,500.00 Annual The pay range for this role is what we expect to pay for candidates that meet the specified qualifications and requirements listed on this job description. Candidate's pay can vary based on location, job-related experience, skills, and education. Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionDescription: Our PLC Applications Engineering department is growing! Join our team and you will contribute to complex and interesting projects that impact the lives of the communities we serve. As a full-service Systems Integrator and Original Equipment Manufacturer (OEM), (Ranked #1 System Integrator focused on Water/Wastewater and #12 overall on the Global System Integrator Giants List 2023). We design, engineer, manufacture, program, and integrate electrical, power, and process control systems for water/wastewater, transportation, power, and renewable energy facilities. We help clients optimize operations, increase overall efficiency, and reduce operating costs. We employ experts in every control discipline. TESCO’s unique ability to manufacture custom solutions and design and commission equipment, power and control systems provides clients with well-designed systems that work as intended. The PLC Applications Engineer writes PLC programs, OIT programs, and software control descriptions for controlling various water and/or wastewater processes. This is the ideal role for an Automation Engineer with a passion for the analysis, design, programming, debugging and modification of programmable logic for such applications. Senior Programmers, for us have the ability and willingness to train and aid other programmers, along with assisting in the development of departmental best practices and standards. Essential Functions: • Write PLC operating program based upon control specification and/or Tesco standards to assure safe, reliable and optimal equipment operation, • Write (publish) concise operating instructions detailing; control parameters and their effects under normal and failure conditions, • Provide technical assistance (phone or job-site) to verify and/or modify PLC program, • Perform customer training and assist sales force with product presentations, • Work with various departments internally, along with consulting engineers, customers and end-users to assure proper system layouts and designs Section 503 rules) Requirements: Demonstrated Skills: • Excellent verbal and written communication skills, • Excellent attention to detail, • High level of organizational and time management skills, • Bachelor’s degree in Computer Science/Engineering/Technology or related field and industry experience, • Applied knowledge in programming major manufacturers (Allen-Bradley, Schneider Electric, Siemens, Tesco, etc.) PLCs & OITs, • Excellent understanding of computer operations, Microsoft Office, • Preferred 2-5+ years of related experience We may pay more or less than the range based on the person’s qualifications. #ZR

Job Description Come grow with us... At Murray Company, how we operate is defined by shared values that are 100 years in the making - Safety, Quality, Honesty, Hard Work and Pride of Ownership. These values have led to our company consistently being in the top 15% on ENRs Best Specialty Contractor’s list. Bring your enthusiasm and unique perspective to Murray Company where you will have the opportunity to grow with us professionally, personally, and financially. Join a team that cares about helping you thrive and succeed. You'll work alongside talented colleagues while establishing lifelong friendships and making a difference in our company and the specialty contracting community. Position Summary The Project Engineer (PE) position at Murray Company is a key entry point into construction project management, and our PE's play a critical role in the success of each project. As a Project Engineer, you will have the opportunity to work alongside best-in-industry project managers and field leaders within our Northern California division, specializing in Process Piping projects. This role provides business and administrative support to facilitate the planning and coordination of activities of assigned project to ensure that goals and objectives of project are accomplished within prescribed time frame and funding parameters. Location: Sacramento, CA with anticipated travel to designated project sites in and around the greater metropolitan area. Key Responsibilities • Assist Project Manager in planning work schedule, determining manpower levels, and arranging for assignment of project personnel., • Assist in the coordination of project personnel activities to ensure project progresses on schedule and within prescribed budget., • May advise Project Manager of potential problems, work interferences, and schedule difficulties. Assist in circumventing/resolving such problems as required., • Compose and/or edit letters, memos, reports, and procedures as required., • Oversee and/or process day-to-day administrative items per supervisor’s authorization., • Prepare special reports, studies, and statistical analysis per supervisor’s request. Such items would usually require research, development and/or interpretation of data and be performed with little instruction or supervision. Qualifications • Proficiency in Excel, • Computer literacy, • Bachelor’s degree in construction management, mechanical engineering or similar area of study Physical Requirements • Prolonged periods of sitting at a desk., • Must be able to lift up to 15 pounds at times., • Must have sufficient to read printed and digital documents., • Must be able to climb ladders, access and egress trenches and/or attic spaces and/or confined spaces., • Requires hearing ability to communicate in noisy environments., • Must be able to recognize alarms, signals, and verbal instructions., • Must be able to wear personal protective equipment (PPE) as needed., • Ability to grasp, handle, and manipulate small objects. Compensation $70,000.00 - $80,000.00 per year Total Rewards Murray Company offers a generous total rewards package to include an Employee Stock Ownership (ESOP) contribution annually on top of a discretionary cash bonus program. Additional benefits include a 401(k) + matching, 100% company-paid medical coverage for employee (up to 2/3 for family), company provided life insurance, optional vision and dental insurance, and more. Murray Company 3rd Party Recruiter Engagements Murray Company does not accept unsolicited resumes or candidate profiles from third-party recruiting agencies or individual recruiters in response to job postings. Resumes submitted to any employee of Murray Company without a signed agreement by an officer of the company (or his or her delegate) AND without the express written agreement by the Talent Acquisition or Human Resources function to engage in a search on behalf of the company will become property of Murray Company. Verbal or written commitments from any other member of Murray Company will not be considered binding terms. Murray Company will not pay a fee to any third-party recruiting firms or individual recruiters that have not coordinated their recruiting activity through the Talent Acquisition or Human Resources function.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking highly motivated Mechanical Engineers to act as customer-facing Manufacturing Solutions Engineers. They will be embedded within our most strategic accounts, acting as an extension of their engineering teams. This role is a unique blend of customer engagement, technical expertise, and operational execution. TAMs will report into Operations but will work very closely with Sales to drive growth and ensure customer satisfaction. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a highly motivated Mechanical Engineer with a passion for customer success and a desire to make a real impact, this is the role for you. Responsibilities: • Customer Integration: • Become a trusted advisor and technical expert for assigned enterprise accounts, • Weekly onsite visits at customer and partner locations, building relationships and understanding their needs, • Collaborate closely with customer engineers on Design for Manufacturing (DFM) to optimize projects for Xometry's platform, • Proactively identify and address potential manufacturing challenges, • Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities • Order Fulfillment and Quality: • As customer projects are awarded to Xometry, ensure orders are directed to the most qualified manufacturers within our network, • Conduct monthly on-site audits of manufacturing partners to ensure they meet Xometry's quality standards and customer specifications, • Manage projects to successful completion, overseeing production, and ensuring on-time delivery, • Handle critical communications, order changes, and escalations related to customer orders, • Monitor customer-specific dashboards to track order progress, delivery metrics, and quality performance • Sales and Account Growth: • Partner with Enterprise Sales Executives to drive account growth and retention, • Identify opportunities for expanding Xometry's services within existing accounts, • Provide technical expertise and support during the sales process, • Bachelor's degree in Mechanical Engineering or a closely related field such Aerospace or Automotive Engineering, Product Design/Development, or Industrial Engineering is required, • 7+ years of experience in manufacturing, product development, and project management, • Experience in the aerospace industry is highly preferred, • Strong understanding of manufacturing processes and DFM principles, particularly as they apply to CNC applications, • Experience in Injection Molding, CNC Machining, Tube Bending, Composites, or 3D printing is preferred, • Proficiency in modelling and drafting software such as Solidworks, • Excellent communication, interpersonal, and problem-solving skills, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite, • Ability to travel to customer and partner sites up to 50%, travel could be short notice and range from short day trips to multi-day drips #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking highly motivated Mechanical Engineers to act as customer-facing Technical Account Managers (TAMs). These TAMs will be embedded within our most strategic accounts, acting as an extension of their engineering teams. This role is a unique blend of customer engagement, technical expertise, and operational execution. TAMs will report into Operations but will work very closely with Sales to drive growth and ensure customer satisfaction. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a highly motivated Mechanical Engineer with a passion for customer success and a desire to make a real impact this is the role for you. Responsibilities: Customer Integration: • Become a trusted advisor and technical expert for assigned enterprise accounts, • Weekly onsite visits at customer and partner locations, building relationships and understanding their needs, • Collaborate closely with customer engineers on Design for Manufacturing (DFM) to optimize projects for Xometry's platform, • Proactively identify and address potential manufacturing challenges, • As customer projects are awarded to Xometry, ensure orders are directed to the most qualified manufacturers within our network, • Conduct monthly on-site audits of manufacturing partners to ensure they meet Xometry's quality standards and customer specifications, • Manage projects to successful completion, overseeing production, and ensuring on-time delivery, • Handle critical communications, order changes, and escalations related to customer orders, • Partner with Enterprise Sales Executives to drive account growth and retention, • Identify opportunities for expanding Xometry's services within existing accounts, • Provide technical expertise and support during the sales process, • Bachelor's degree in Mechanical Engineering or a closely related field such Aerospace Engineering, Product Design/Development, or Industrial Engineering is required, • 7+ years of experience in manufacturing, product development, and project management, • Experience in the aerospace industry is highly preferred, • Strong understanding of manufacturing processes and DFM principles, particularly as they apply to CNC applications, • Experience in CNC Machining, Tube Bending, Composites, or 3D printing is preferred, • Proficiency in modelling and drafting software such as Solidworks, • Excellent communication, interpersonal, and problem-solving skills, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite, • Ability to travel to customer and partner sites up to 50%, travel could be short notice and range from short day trips to multi-day drips #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description Job Description: The role is a senior water treatment leader with strong project management experience, strong process capabilities and understanding, and strong relationship building capability to support the Hazen’s West Regional Manager and local Operations Managers in developing water treatment business in Northern California and Oregon. The position can be based in any of the Northern California offices (San Francisco, Concord, or Sacramento), however, it will serve across the Region depending on the expertise and the needs on projects and pursuits. Responsibilities: • Assist the Operations Managers from the northern California and Oregon offices in strategic business planning and development of the annual office business plans for identifying strategies to grow the local market share and technical capabilities, identifying annual goals for improving the water treatment resume of the office, Region, and the firm., • The position will support the West Region and National Water Practice leadership in strategic business planning, strategic technology initiatives, identifying research and study areas, identifying strategies to grow the drinking water capabilities in the Offices and the Region., • Assist the Regional Manager and Operations Manager with identifying, pursuing, selling and delivering water treatment projects., • Developing technical treatment strategies, selecting treatment processes, developing process design criteria, and delivering projects., • Identifying key opportunities and supporting and developing proposals., • Helping the operations managers to identify, hire, supervise and mentor junior water staff., • Holistic problem solving for clients considering their water supplies, water demands and uses, water production capabilities, business operations, regulatory constraints, and financial expectations., • Direct coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Managing projects to meet client expectations, budgets, and quality requirements., • Following internal Hazen processes to ensure quality delivery of engineering projects for clients., • Full technical responsibility for interpreting, organizing, executing, and coordinating assignments on small to large projects, • Performing planning, studies, design, and support of projects through design, construction, and operation., • Assisting with review and negotiation of contracts, • Assisting in the mentoring of junior staff to ensure they meet their career goals and objectives, • Must be a proven project manager with drinking water quality, process and project experience., • Experience working on all phases of water projects from concept development, project planning, applied research, study, advising through detailed design, construction, and operations., • Experience working in municipal water treatment, water quality, water treatment technology, or manufacturing., • Excellent verbal and written communication skills are essential as this role involves a high degree of client engagement., • Bachelor of Science degree in Environmental, Civil, Chemical or Mechanical Engineering.

Job DescriptionDescription: What we do Wescom Solutions provides systems engineering, construction management, and operations support services to the rail transit industry. Our mission is to help transit authorities enhance their system capabilities, capital program execution and operational efficiencies in the safest, and most time- and cost-efficient manner. Why Wescom Solutions At Wescom Solutions we're not just offering a job; we're inviting you to be a crucial part of our dynamic culture. Here's why working with us is a unique and rewarding experience: Make a Real Impact: In a small business, your contributions don't get lost. You'll play a pivotal role in shaping our success from day one. Flexibility and Agility: Say goodbye to rigid structures. At Wescom Solutions, we embrace flexibility and adaptability, allowing you to thrive in a creative and dynamic work environment. Learning and Growth Opportunities: A small business is a breeding ground for learning. Expect to wear multiple hats, take on new challenges, and grow both personally and professionally. Direct Communication Channels: Skip the hierarchical ladder. Here, your ideas and suggestions are heard directly. Open communication is not just encouraged; it's essential to our success. Ready to be a part of something big in a small package? Apply now and help provide "Solutions for Tomorrow's Connections". Position Summary We are seeking a Overhead Contact System (OCS) Engineer who will be responsible for the design of systems for high-speed rail, commuter rail, light rail, streetcar, and electrified bus systems throughout the United States. This position can be based anywhere in California but will require the ability to travel when needed. The OCS Engineer will be part of the Systems Engineering team responsible for a variety of engineering tasks including, but not limited to planning, conceptual engineering, design, final engineering, constructability, and cost estimating. Essential Duties and Responsibilities • Design OCS layout, wire tensions, for light rail, commuter rail and streetcar with pantograph as well as electrified buses with trolley poles., • Generate design reports for all phases of system design for new OCS and modifications to existing systems., • Design layout plans, wire profiles, and support structures, including cantilevers, portals, head spans, OCS hardware and grounding and bonding., • Perform pole and foundation loading calculations, tension calculations, analysis of wire sag and rise conditions., • Perform technical review of other team members’ designs., • Ensure compliance with all federal, state & local regulations, • Participate in the implementation phase of projects, such as support for Planning, Scope Generation, Installation, Testing & Commissioning, Cutover, Record Drawings review and final reports., • Collaborate with other technical teams such as Traction Power, Communications, Signals & Train Control, Electrical, Mechanical, Structural, Architectural, Trackwork, and Civil; including coordination and design of interfaces., • Lead technical interactions with clients, operations, and other major stakeholders., • Support cost estimates, project schedules and budget forecasts., • Participate in project pursuit efforts., • Serve as a leader and provide guidance to junior team members, • Support the management of System Interfaces and creation of Interface Control Documents (ICDs)., • Support System Engineering and Assurance efforts such as Requirements Management, Verification & Validation, RAM, Safety Assurance, Quality Management, EMI/EMC, and others. Requirements: Qualifications (Knowledge, Skills, and Abilities) Minimum Requirements: • 6+ years of relevant experience and EIT with a goal of obtaining a Professional Engineer (PE) license., • Experience with OCS design, including the design of 600 to 1500 volt dc rail as well as 12 to 25 kilovolt AC, • Experience in OCS Testing & Commissioning, Cutover, Interface Management and Operations & Maintenance., • Working knowledge of codes and standards applicable to rail projects., • Accustomed to operating within a multi-disciplinary project structure with responsibility for OCS design., • Experience and knowledge of tension and pole/foundation load calculations., • AutoCAD or MicroStation experience., • Self-motivated and able to work independently with limited direct supervision., • Able to multitask due to concurrent projects., • Excellent communication and interpersonal skills in order to lead discussions with senior project staff, partners, clients and suppliers. Wescom Solutions is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable.

Job Description Candidate should have previous Forensic experience. You must possess a valid Professional Engineering license (PE) to be considered Unqualified candidates will not receive a response. As an Electrical Engineer, you will conduct and manage investigations involving residential, commercial and industrial electrical systems; examine and assess electrical equipment and components; and conduct fire origin and cause investigations. You will interact with clients and other consultants, manage multiple, unique projects, and prepare written reports summarizing your analyses. Engineering Design & Testing Corp. (EDT) is an association of engineers committed to the study, interpretation and resolution of loss. With loctions nationwide, EDT engineers are well regarded as technical and scientific resources when determining the root causes of losses involving people, property, and products of manufacture. Our engineers are also called upon to assess the scope of damage to commercial and industrial facilities and equipment. Our clients include insurance-related firms and companies, law firms, government agencies, and private industry. EDT engineers are professionals who enjoy technical challenges and job variety while working with top-notch colleagues. The environment at EDT is one where motivated engineers want to join and stay. Technical Qualifications: • Bachelor of Science degree in Electrical Engineering (not electronics), • Licensed Professional Engineer (P.E.), • Forensic Experience, • Advanced Technical Education degrees (a plus), • Computer Software Capable (for example: MathCAD, AutoCAD, Microsoft Office) Experience in One or More of the Following Areas: • Process Plants, • High Voltage Power Generation and Distribution, • Instrumentation and Controls Professional Skills: • Prioritize effectively, • Think independently, • Communicate clearly, orally and in writing, • Think and work analytically, • Coordinate and work well with others, • Exercise sound judgment and use common sense, • Foster strong, lasting relationships, • Embrace and thrive on challenge, • Show flexibility and adaptation to new situations Characteristics: • Professionalism, • Honesty, • Competitive and Unique Salary Plan, • Health Insurance, • Dental Insurance, • 401(k) with company match Our unique salary plan allows for financial growth unmatched in the industry. EOE View our site online at Engineering Design & Testing Corp also has opportunities in other locations for Civil/Structural, Mechanical and Electrical Engineers who are Licensed P.E.'s. Please, no agencies.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Engineering Team Lead is an engineering management position responsible for providing technical engineering oversight and design team management for engineering projects for which they are assigned. This technical management role is responsible for financial, resource allocation, logistic and technical leadership of projects and has the capability to mentor and train staff under their supervision. You'll be working on tenant fit-outs for our Data Center/Mission Critical work. WHAT YOU'LL DO: * Possess the ability to understand project requirements and develop a design fee for the work requested. * Prepare and oversee work plans for engineering and production resources. * Oversee Engineers, Designers and Modeling staff assigned to team or project work. * Ability to communicate with Project Manager (PM) or Executive regarding effort required to accomplish an expected deliverables and project support.This may include developing requests for additional services for submittal to the PM or Owner. * Lead the Engineering CAC effort and interaction with the project PM. * Able to resolve a variety of complex problems (i.e. conflicting design requirements, unsuitability of conventional materials, difficult coordination requirements). * Supervise the coordination of the project with city, state, and county officials, and other regulatory agencies * Attendance at project design meetings with the overall Design Build Team. * Job Site Visits to review installation or assess current conditions. * Perform Value Engineering studies. * Act as Engineer of Record for projects within their responsibility. * The duties and responsibilities are intended to describe the general nature and scope of. This is a partial listing and other responsibilities will be assigned based on the position's role within the business unit. WHAT YOU BRING TO US: * Bachelor's Degree from an accredited university or college in engineering, architectural engineering, or construction sciences. * Typically requires a minimum of 8 years of Electrical Engineering "tenant fit-out" experience * Registration as a licensed US-based Professional Engineer (P.E.) is required for this position. * Field experience is strongly recommended. * Education and experience can be a combination of education, training, and relevant experience. COMPETENCIES: * Power Distribution & Systems: Deep knowledge of critical power infrastructure, including transformers, switchgear, paralleling switchgear, UPS, battery strings, and diesel generators. * Load Management: Ability to calculate and balance electrical loads to prevent oversubscription and equipment failure. * Design & Modeling: Proficiency in designing and specifying electrical systems, creating detailed electrical diagrams (single-line diagrams), and performing load flow, short circuit, and coordination studies using software like or . * Standards & Codes: Thorough understanding and practical application of industry standards, electrical codes (like ), and regulations for safe and compliant designs. * Blueprints & Terminology: Strong ability to interpret electrical and mechanical SLDs (single line diagrams), construction drawings, and understand data center construction terminology. * Software Proficiency: Skill in using electrical design software, , or other relevant . WHAT YOU'LL NEED TO BE SUCCESSFUL: * Knowledge of engineering processes and calculations including load calculations, equipment layout, normal and emergency standby distribution, HV/MV distribution, lighting layout, lighting calculations, power and lighting controls, utility coordination, grounding, value engineering, applicable codes, and standards, is required. * Working knowledge of equipment and system testing and commissioning. * The ability to assume responsibility, interface, and coordinate with others. * Great at problem-solving, communication, and attention to detail. * The ability to analyze and resolve complex engineering problems. * The ability to oversee Electrical System Studies such as: Short Circuit, Overcurrent Protection, Arc Flash, Voltage Drop/Droop, and Underground Thermal Calculations. * Management skills are required, including work planning, resource management, fee development, staff oversight, staff development and advancement planning. * Knowledge of electrical construction sufficient to understand how design packages will be built. * Fluency with Building Codes and Local Codes in the local area of projects. * Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Oracle preferred * Ability to prioritize and manage multiple tasks, changing priorities as necessary * Ability to work under time pressure and adapt to changing requirements with a positive attitude * Effective oral and written communication skills. * Ability to be self-motivated, proactive and an effective team player. * Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, Trade Partners and others TRAVEL: * up to 15% (does not include local field visits) WORKING CONDITIONS: * General work environment - sitting for extended periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning. * Noise level is typically low to medium; it can be loud on a job site. * Occasional lifting of up to 30 lbs. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description This position will work on one of our project sites near the Sacramento, CA area. What you get to do: • Interpret design/drawings for crafts installing material., • Prepare drawings and sketches to support construction work, change orders, estimates, etc., • Coordinate work schedules with subcontractors too complete work on time., • Verify all completed work stays in sync with applicable codes, drawings, specifications., • Currently enrolled at an accredited college or university as a Junior or Senior in an undergraduate program. Preferred majors/concentrations in Construction Management, Mechanical Engineering, Civil Engineering, or related fields. Evidence of high academic achievement with current or prior elected leadership experience preferred. Passion and desire to work in the construction industry. Prior work experience, internship, or trade experience preferred, but not required., • Proficiency with Microsoft Office 365 and ability to work optimally with minimum supervision., • A valid driver’s license may be required. Individuals in this role may be subject to an annual Motor Vehicle Records check. The outcome of any MVR checks conducted may negatively impact the persons’ ability to participate in any vehicle program provided by the company, including but not limited to the ability to drive a personal vehicle on behalf of The Boldt Company or rent a vehicle through for business travel purposes. While performing the duties of this job, the employee is occasionally required to position objects and operate tools or controls. Employee occasionally uses computer keyboard. The employee is occasionally required to position self to maneuver in confined or awkward spaces. The employee regularly is required to remain in a stationary position and move to access people or machinery or workspaces. Employee is occasionally required to ascend and/or descend a ladder or stairs to reach work areas. The employee must regularly move up to 20 pounds and occasionally move up to 50 pounds. The employee is regularly required to travel (as vehicle driver and as passenger on various modes of transportation) and frequently performs work on-site at construction work sites. Specific abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Employee views computer monitor regularly. The employee is required to be able to effectively communicate while on the job site and throughout the completion of duties. The working conditions of this position requires the employee to work both inside and outside in heat/cold, wet/humid, and dry/arid conditions. Frequently required to use personal protective equipment to maintain safety and prevent exposure to harmful materials. The environment for which this position functions may be exposed to prolonged loud noises and may contain scents and fragrances. May be requested to work overtime and weekends. Intern’s hourly wages are based on relevant previous internship experience. The range is $25 to $29 per hour. The Boldt Company is an Equal Opportunity Employer. Disclaimer: This job description is intended to be a summary of the primary essential duties and responsibilities of this position. The job description is not intended to be inclusive of all duties an individual in this position might be asked to perform or all the qualifications that may be required either now or in the future. Other duties, responsibilities and activities may be assigned or changed at any time.

Job Description Osborne Company is a premier manufacturer’s representative in Northern California, Northern Nevada, and Hawaii. For 52 years, we have represented the most dynamic manufacturers in the plumbing and mechanical equipment industries. We are an established and expanding agency built around our people. We are currently seeking a highly motivated Business Development Sales Engineer to join our team. This role is responsible for building and managing relationships with engineering firms and design-build contractor accounts. The ideal candidate possesses a well-balanced combination of technical experience in the construction industry, excellent communication skills, and a strong, proactive work ethic. Candidates will provide outstanding customer service, be respectful and considerate, and maintain the highest level of honesty and integrity. The Business Development Sales Engineer drives revenue and revenue growth by specifying products and providing technical support to customers. Duties and responsibilities include: • Build/Manage key relationships with engineering firms/design-build contractor accounts., • Possess detailed knowledge of accounts – relevant staff, projects/project types, bid boards/project reports, etc., • Develop deep technical knowledge of all relevant lines and provide all necessary technical support to accounts., • Obtain familiarity with market trends, customer needs, competitors, new technologies, etc., • Promote and present all lines, including accommodating vendor territory visits when required., • Drive product specification for Osborne manufacturers to be the basis of design., • Produce and prepare equipment selections and submittals based on engineer requests., • Deliver documentation of activities and projects and maintain detailed up-to-date records of activities., • Represent Osborne Company at industry events and meetings, including business and social functions., • Identify, research, and cohesively propose potential new customers and new business growth opportunities., • Ability to self-motivate and self-prioritize. High level of time and task management., • Exhibit a high level of professionalism internally and externally., • Experience with CRM., • Possess ability to read and interpret design documents., • Provide timely updates and responses to various internal/external tracking mechanisms and emails., • Proven success in meeting sales goals., • Strong desire to work independently and remotely from the field., • Ability to adapt to new selling strategies and techniques as needed., • Capable of delivering superior customer service., • Excellent interpersonal communication and writing skills., • Consistent integrity and ethical standards., • Efficient project and time management skills., • Proficiency in MS Office: Word, Excel, Outlook, and PowerPoint., • Success-driven individual capable of analyzing, adapting, and thriving in a rapidly growing environment., • Bachelor’s Degree in Engineering, equivalent technical degree, or suitable work experience., • 3+ years of experience in the plumbing or hydronic industry., • Ability to travel as required, primarily locally within the Bay Area., • Our employees are the heartbeat of our agency, and your health is our best asset; we offer paid medical, dental, vision, and life insurance to help offset the cost of maintaining your health., • As a Business Development Sales Engineer, driving will be a significant component of your daily schedule, and we understand the wear and tear that this will cause any vehicle, because of this, we offer a monthly car allowance. We also provide a company-issued gas card to cover your business fuel expenses., • As a company, we recognize that our employees need time to rest, relax, rejuvenate, and spend time with family and friends, so we offer paid vacations and holidays. All interested candidates should submit their current resume and desired salary requirements to begin the application process.

Job DescriptionJob Description JOB DETAILS This is an onsite internship in Sacramento, CA for Summer 2026. The Engineering Intern at Cornerstone Building Brands is responsible for various project tasks related to Process Improvement. Reporting directly to the Continuous Improvement Manager, this role may be assigned a project such as process flow analysis, production parts picking/delivery/presentation, process mapping, time studies, and layouts. As a member of the Continuous Improvement team, you will be instrumental in making quantifiable improvements in the business. DUTIES AND RESPONSIBILITIES • Possible projects and initiatives this intern will work on could include:, • Line balancing studies to identify process improvements, • Designing small manufacturing jigs that are easily 3D printable, • Support a Kaizen event team to complete a project, • Competitive pay, • Inclusive, collaborative environment, • Bragging rights – you’ll work for the market leader in multiple product categories WHAT YOU’LL NEED • Pursuing a degree in Electrical, Manufacturing, Industrial, or Mechanical Engineering is required, • Must have completed Sophomore year coursework, • Experience with AutoCad, Inventor or SolidWorks is preferred, • Experience in a manufacturing environment is preferred Additional Information Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description What We Do At Terabase Energy, we believe that digitalization and automation will drive the next wave of innovation and cost reduction in large scale solar. To fully unlock the potential of this opportunity, Terabase is developing an interconnected software and construction automation platform. We work alongside project developers, owners, and engineering & construction firms to support the design, optimization, and construction of huge solar projects around the world. Our team is a blend of solar-industry veterans and newbies, thought-leaders, dreamers, software, electrical and mechanical engineers, coders, product managers, project managers, and sales and marketing professionals. We are based in Northern California, with several other offices in the United States and around the world. If all of this piques your interest, we’d love to hear from you! . The Role The Employee Health and Safety Manager will be act as a consultant to business unit leaders and provide support for our product teams and workers. This role will provide leadership, coordination, and execution of day-to-day requirements on projects, managing workers compensation claims, ensuring precise accident reports, and driving safety programs and initiatives. The EHS Manager will be operating on client sites as well as Terabase locations. Requirements Responsibilities • Provide support to the R&D and product teams by maintaining a visible presence to the field, performing production floor visits to the sites and facilities., • Develop a Site Safety Management Plan (SMP) for the project to ensure a safe work environment for all company employees, contractors, visitors and community., • Establish and maintain a positive safety culture throughout the organization., • Communicate safety information regularly to the organization in a highly professional and effective manner., • Implement a risk-based approach to safety management, consider non-safety related factors, and balance practicalities with safety measures., • Investigate safety incidents, perform root cause analysis, establish corrective and preventive actions, monitor for trends., • Establish and maintain safety training content. · 5-7 years of applied professional EHS work, in a construction field. Factory setting is also desirable. · Understanding of the software, engineering and/or climate tech sectors. · Experience providing EHS support across multiple locations. · Strong planning, coordination, organization and prioritization skills. · Proven ability to foster relationships with managers and working partnerships with a broad range of people. · Ability to work well autonomously and within a team in a fast-paced and deadline-oriented environment. · Thorough understanding of OSHA, ANSI, and EPA regulations. · Ability to interpret State and Federal regulations and applicability to facility to ensure compliance. · Ability to write regulatory reports, business correspondence and procedure manuals. · Experience performing risk assessments and audits. . Ability to define problems, collect data, establish facts, and draw valid conclusions. Benefits Compensation And Benefits The salary for this role will range from $130,000 - $150,000 Our salary ranges are determined by role, level, and location. Within each posted range individual pay is determined (and may be greater or higher) dependent on work location and additional factors, including job-related skills, experience, and relevant education or training. Terabase offers competitive compensation along with a comprehensive benefits package including: • Generous time off and holiday policy, • Remote flexibility, • Flexible time off, • Comprehensive benefits package, • Career progression, • 401k match, • Stock options, • Home office set up allowance, • And much more! Terabase is an equal opportunity employer. We recruit, hire, employ, train, promote, and compensate individuals based on job-related qualifications and abilities. We strongly encourage people of all backgrounds to apply. We do not discriminate for any reason including race, color, sex, gender, age, religion or religious creed, national origin, ancestry, citizenship, marital status, sexual orientation, gender identity, gender expression, genetic information, physical or mental disability, military/ veteran status, or any other characteristic protected by law. We offer a welcoming and inclusive environment in service to one another, our products, the diverse consumers we represent, and the communities we call home. Principles only. This role is not open to receiving agency candidates, and any contingent submissions will not be considered. Terabase Energy does not utilize third-party recruitment agencies. Please contact our Recruiting team at with any staffing-related inquiries.

Job DescriptionStructural Integrity Associates, Inc. is looking for a motivated civil/structural Consultant to join our Critical Infrastructure Solutions team in our San Jose, CA office. Remote or other office locations (San Diego, CA, Denver, CO, Sacramento, CA, or Atlanta, GA) may be considered. A Consultant is an individual that has diversified knowledge of engineering principles, business development and leadership abilities, and capable of taking full responsibility for organizing, executing, and coordinating project assignments. Project assignments may include 3D modeling, advanced analysis and design of various industrial building and non-building structures and nonstructural components. The company operates in a variety of industries including design and maintenance of civil infrastructure, nuclear power, healthcare, dams and waterways, transportation, defense, pressure vessels and piping, and mechanical and electrical equipment. The individual should have experience in working with stakeholders to understand issues faced and develop scopes of work for proposals. Primary Responsibilities: • Plan, schedule, conduct, and coordinate projects of medium to high complexity with limited oversight, • Execute complex structural engineering tasks, • Control and regularly report progress of project scope and budget, • Provide clear instructions to team members on delegated tasks, • Manage the preparation of technical reports and calculation documents, • Review calculations and analyses from other engineers, • Act as a resource for engineering staff, • Assist senior management to win repeat work from existing clients through effective service and minding of clients’ needs., • Represent the company, often as the sole SIA attendee at project meetings, • Coordinate with other technical leaders in the company in solving very complex engineering problems, • Implement SIA’s policies on safety and quality controlRequired Skills/Qualifications:, • MS in Civil, Structural, or Geotechnical engineering from an ABET-accredited university, • At least 7 years of relevant professional experience, • Professional Engineer (PE) license, • Experience managing projects in solid mechanics, steel, concrete, seismic design/analysis, advanced structural analysis, structural dynamics, and use of advanced finite element analysis software platforms, • Experience solving problems using data, logic, and judgement, • Experience using structural engineering codes and standards such as IBC, ASCE, ACI, and AISC, • Proficiency in structural engineering or finite element analysis programs (e.g. ANSYS, ABAQUS, SAP2000, LS-DYNA, Matlab, and/or Mathcad), • Strong planning and organizational skills to complete assignments within budget and schedule, • Excellent written and oral communication skills, • Ability to review, critique, and improve the written output of other engineersDesired Skills/Qualifications:, • Excellent track record of recognized technical excellence and market leadership, • Demonstrated ability to develop strong client relationships, • Leadership and participation in industry standard committees Exact pay will be commensurate with experience. Structural Integrity Associates, Inc. (SIA) does not welcome third-party recruiters, employment agencies, headhunters, etc. Please do not reach out to SIA employees requesting a call, sit down, meeting, or email response. Export Control Notice: Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110. Hiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE’s Generally Authorized Destinations List: . About Us: Structural Integrity Associates, Inc. (SIA) is an engineering consulting firm serving various industries including Nuclear Power, Energy Services, Pipeline Integrity, and Critical Infrastructure. Join a team of internationally recognized experts in a culture based on knowledge, excellence, and respect for one another. Our employees are members of a distinct community of internationally respected professionals committed to quality, engineering innovation and a shared goal of building a safer world. Why Work at SIA? SIA offers a competitive salary and performance-based bonus program. Our retirement benefits include a Traditional 401k, Roth 401k, and an employer match. To help employees maintain a work-life balance, SIA also offers various paid time off including vacation, floating holidays, sick time, and parental leave. Our employees also enjoy a comprehensive benefits program that includes the following: • Medical, dental, and vision insurance, • Life Insurance and AD&D, • Short-term and long-term disability, • Health Savings Account with employer contribution, • Flexible Spending Account for health care and dependent care, • ID theft protection and credit monitoring Structural Integrity Associates, Inc. is an equal opportunity employer. Powered by JazzHR cjFHcxiDxu

Job Description Candidate should have previous Forensic experience. You must possess a valid Professional Engineering license (PE) to be considered Unqualified candidates will not receive a response. As an Electrical Engineer, you will conduct and manage investigations involving residential, commercial and industrial electrical systems; examine and assess electrical equipment and components; and conduct fire origin and cause investigations. You will interact with clients and other consultants, manage multiple, unique projects, and prepare written reports summarizing your analyses. Engineering Design & Testing Corp. (EDT) is an association of engineers committed to the study, interpretation and resolution of loss. With locations nationwide, EDT engineers are well regarded as technical and scientific resources when determining the root causes of losses involving people, property, and products of manufacture. Our engineers are also called upon to assess the scope of damage to commercial and industrial facilities and equipment. Our clients include insurance-related firms and companies, law firms, government agencies, and private industry. EDT engineers are professionals who enjoy technical challenges and job variety while working with top-notch colleagues. The environment at EDT is one where motivated engineers want to join and stay. Technical Qualifications: • Bachelor of Science degree in Electrical Engineering (not electronics), • Licensed Professional Engineer (P.E.), • Forensic Experience, • Advanced Technical Education degrees (a plus), • Computer Software Capable (for example: MathCAD, AutoCAD, Microsoft Office) Experience in One or More of the Following Areas: • Process Plants, • High Voltage Power Generation and Distribution, • Instrumentation and Controls Professional Skills: • Prioritize effectively, • Think independently, • Communicate clearly, orally and in writing, • Think and work analytically, • Coordinate and work well with others, • Exercise sound judgment and use common sense, • Foster strong, lasting relationships, • Embrace and thrive on challenge, • Show flexibility and adaptation to new situations Characteristics: • Professionalism, • Honesty, • Competitive and Unique Salary Plan, • Health Insurance, • Dental Insurance, • 401(k) with company match Our unique salary plan allows for financial growth unmatched in the industry. EOE View our site online at Engineering Design & Testing Corp also has opportunities in other locations for Civil/Structural, Mechanical and Electrical Engineers who are Licensed P.E.'s. Please, no agencies.

Job DescriptionHolt of California is proud to be part of the elite group of Caterpillar dealers worldwide. We sell service and rent a wide-variety of equipment Including Large and Small Construction Tractors, Forklifts, and Prime/Stand-by-Power Generation. THIS POSITION IS LOCATED IN WEST SACRAMENTO CA. QUALIFICATIONS REQUIREMENTS To qualify for the position of Power Systems Technical Communicator an individual must possess a strong Caterpillar technical background in Industrial Engines. Experience and knowledge of Electric Power Generation systems, Marine and or Petroleum would be considered the equivalent to Industrial engine knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES • Responsible for technical assistance with all Power Systems issues included but not limited to Industrial engines and Electric Power Generation systems., • Work directly with all levels of technicians and supervisors for all technical needs., • Work directly with the Caterpillar parts and service representatives for technical assistance and goodwill for product support., • Assist supervisors and other members of management with administration of warranty, service letter administration, and extended service coverage contracts., • Assist in developing training schedules for technicians and provide training as needed on Caterpillar SISWEB/TMI and other web-based dealer systems., • Research and investigate repair status information for customers, technicians and other department employees as required., • Performs other technical communicator duties including requests to factory engineering for technical assistance as well as documenting and reporting product problems., • Assist in preparation of quotes for customers as required., • Some driving is required, • Accountability - Ability to accept responsibility and account for his/her actions., • Accurate - Ability to perform work accurately and thoroughly., • Analytical Skills - Ability to use thinking and reasoning to solve a problem., • Assertiveness - Ability to act in a self-confident manner to facilitate completion of a work assignment or to defend a position or idea., • Customer Oriented - Ability to take care of the customers' needs while following company procedures., • Detail Oriented - Ability to pay attention to the minute details of a project or task., • Organized - Possessing the trait of being organized or following a systematic method of performing a task. High school diploma or general education degree (GED); and/or five years related experience or equivalent combination of education and experience. Must have experience in engine rebuilding and reuse guidelines for Caterpillar components. Must have experience with and full understanding of diesel and gas fueled engines, controls, fuel, lubrication and cooling systems. An understanding of AC power generation, control and distribution, including power output, power factor, circulating current and generator harmonic measurement and calculations a plus. SKILLS & ABILITIES • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Ability to speak effectively after groups of customers or employees of this organization., • Ability to add, subtracts, multiply and divides in all units of measure, using whole numbers, common fractions, and decimals., • Ability to compute rate, ratio and percent., • Ability to define problems collects data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Ability to conduct oneself in a manner that is always professional and business-like. Must have a valid California driver’s license and a clean DMV report. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, use hands and fingers to handle, feel objects, tools or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk and hear. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 100 pounds, and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee regularly works near moving mechanical parts and is regularly exposed to fumes or airborne particles. The employee frequently works in outside weather conditions and is occasionally exposed to toxic or caustic chemicals and vibration. The employee occasionally works in high or precarious places, and the noise level in the work environment is usually moderate. COMPENSATIONS Pay Range: $85,000 - $105,000 Annually Pay Range Dependent on Knowledge, Skills, and Ability. Wage depends on knowledge, skills and ability to perform the responsibilities of the job. WHY WORK FOR HOLT? Monthly salary. Excellent company-paid benefits including medical, dental, retirement, vacations and holidays. Holt of California is an Equal Opportunity Employer M/F/V/DV. Holt provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, national origin, physical or mental disability, all applicable veteran status or disabled veteran status. For more information about our California Employee Privacy Policy, please click on link below. Privacy Policy #zip Company DescriptionPeople come first at Holt of California. Whether you are a customer or employee, we strive to meet your needs to the best of our abilities. It takes a special combination of productivity and safety to provide our customers with superior customer service while ensuring our employees go home safe every day. The safety of our employees is one of the highest priorities we place on our company culture and comes through in our Vision Zero initiative. Vision Zero has the goal to have zero injuries and incidents without sacrificing quality and productivity. Holt of California understands that what happens at work can affect you at home and vice versa. We strive to provide our employees with a safe, enjoyable work environment that extends through to the benefits we offer to them and their families. It’s important to us that our employees know things are taken care of at home so they can focus on the job at hand when at work. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.People come first at Holt of California. Whether you are a customer or employee, we strive to meet your needs to the best of our abilities. It takes a special combination of productivity and safety to provide our customers with superior customer service while ensuring our employees go home safe every day.\r\n\r\nThe safety of our employees is one of the highest priorities we place on our company culture and comes through in our Vision Zero initiative. Vision Zero has the goal to have zero injuries and incidents without sacrificing quality and productivity.\r\n\r\nHolt of California understands that what happens at work can affect you at home and vice versa. We strive to provide our employees with a safe, enjoyable work environment that extends through to the benefits we offer to them and their families. It’s important to us that our employees know things are taken care of at home so they can focus on the job at hand when at work.\r\n\r\nEqual Opportunity Employer/Protected Veterans/Individuals with Disabilities\r\n\r\nThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.

Theory, principles and practices of mechanical engineering design for thermal, hydro, wind, and photovoltaic power generating resources and pipelines; machine design principles; machine shop practices; methods and techniques of stress analysis; piping systems; air conditioning systems; vibration and

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Fully understand the project scope and requirements by studying documentation, meeting with clients, and visiting relevant locations, • Collect necessary documentation such as plans, drawings, and project specifications, • Determine the key variables for cost and conduct research to determine expected labor and materials costs, • Gather bids and negotiate with service providers to secure the best possible prices, • Create and submit estimates to project managers, • Budget and forecast using appropriate softwareQualifications, • Bachelor’s degree in mechanical engineering or a related field, • Certified Professional Estimator (CPE) is preferred, • Previous experience as an Estimator is preferred, • Ability to forecast building costs and knowledge of estimation formulas, • Strong mathematical and analytical skills, • Skilled in relevant software, • Excellent research, writing, and negotiation skills

Job Description Junior Automation Technician - Sacramento, CA Compensation: $26 - $31 per hour Part-time, 10-15 hours per week Overview: Nexus HR is looking for a Robotics Operator to help maintain and troubleshoot automated prescription-filling machines. This is a great opportunity for students or recent grads in electronics, mechatronics, or robotics who want hands-on experience with advanced healthcare technology. About the Job In this role, you’ll assist with machine diagnostics, basic hardware/software debugging, and preventive maintenance to keep systems running smoothly. You’ll also work with our India technical team, support testing of updates and APIs, and document issues and solutions. If you’re detail-oriented, enjoy problem-solving, and want to grow your skills in robotics, we’d love to hear from you! Duties and Responsibilities: * Assist in the maintenance and troubleshooting of automated prescription-filling machines. * Collaborate closely with the India technical team, guiding and following their instructions to perform machine diagnostics and repairs. * Conduct basic hardware and software debugging, identifying and reporting issues accurately. * Support the integration and testing of APIs related to machine communication and control (basic understanding required). * Document maintenance procedures, problems encountered, and solutions implemented. * Participate in regular technical calls and update teams on machine status. * Help with preventive maintenance schedules to reduce machine downtime. * Assist in testing new hardware or software updates before deployment. * Support continuous improvement initiatives by suggesting enhancements based on observations during maintenance. Qualifications: * Currently pursuing or have completed coursework in Electronics, Mechanical Engineering, Mechatronics, Robotics, or related fields. * Basic understanding of robotics hardware components (motors, sensors, actuators). * Familiarity with debugging tools and techniques for mechanical and electronic systems. * Basic knowledge of APIs and software integration is a plus. * Strong problem-solving skills and ability to work collaboratively with remote teams. * Good communication skills in English for clear coordination. * Ability to follow detailed technical instructions accurately.

Job Description PRIMARY FUNCTION Responsible for the design building automation and controls for medium to large, complex projects from schematics through construction administration. TYPICAL DUTIES - PROJECT RELATED • Responsible for developing the building automation and controls for each HVAC and plumbing system from schematics through construction administration phases., • Contribute to the development of energy conservation measures., • Coordinate with the team for intergration of mechanical systems with the low voltage and eletrical systems., • Responsible for directing support team members within the mechanical engineering discipline regarding the building automation and controls., • Prepare and monitor discipline work plans for takss and hours estimates., • Research code, standards, and technologies for projects. Communicate and document findings., • Contribute to the Mechanical Basis of Design Journal through the life of the project., • Conduct material and product research as required for project development., • Attend project meetings as necessary., • Interface with other sector and core team leaders., • Respond to client questions/requests within one business day., • Document interpretation and submittal reviews during bidding and construction administration., • Sign and seal your work., • Perform other duties as assigned by the supervisor. TYPICAL DUTIES - NON-PROJECT RELATED • Responsible for the development of design standards for the documentation of building control systems., • Mentor other engineers and designers to help prepare them for greater project responsibilities., • Provide feedback to the supervisor on performance of support engineers and designers., • Identify opportunities to improve quality and services, and participate in the implementation., • Participate in in-house training activities., • Participate in related professional organizations and activities., • Offer recognition to those staff members who you observe doing excellent work and/or things beyond their job expectations. SKILL, KNOWLEDGE, EDUCATION AND EXPERIENCE • Bachelor's degree required and licensure preferred., • Proficient at using Revit., • Knowledgeable about ASHRAE Guidelines 13 & 36., • Knowledgeable about open and proprietary Building Automation Systems, e.g. Tridium,, • LEED Accredited preferred., • Minimum six years' experience in A/E industry preferred., • Extensive knowledge of all aspects of professional services from schematic design through project close-out, including design and technical expertise., • A comprehensive understanding of the coordination aspects and related requirements of all design disciplines., • Good written and verbal communication skills, and strong organizational skills., • Motivate support staff and delegate assignments., • Detail-oriented, self-motivated, enthusiastic and flexible., • Ability to work well with others under deadline situations. PHYSICAL REQUIREMENTS • Capable of traveling to and from project sites for attending client, project and construction meetings., • Ability to access existing and new project sites for observation, investigation and evaluation purposes., • Ability to use equipment for communication and documentation purposes. #LI-DD1

Job Description What you'll do: Lead the conceptual design effort on a variety of project types. Manage all aspects of a project's design with project management, architects, and other trades through the completion phase. What you'll need to be successful: • Supervises or directs the workflow of less-experienced engineers in performing HVAC or other system design and documents production of small and large projects, • Provides conceptual design for specific projects, • Serves as a design professional at project team design meetings, • Prepares complex preliminary redline design layouts for estimating, • Performs more complex calculations for a project, such as heating/cooling loads, equipment selection and sizing, friction loss calculations, etc., • Performs site inspections to determine compliance with construction documents and resolves design issues during construction phase, • Mentor other engineers and/or technicians on a project basis. What you bring to the table: • Excellent knowledge of applicable systems design, such as fire suppression, HVAC, plumbing, etc., as well as general understanding of system operations., • Ability to read mechanical and plumbing plans, • Excellent verbal and written communication skills and ability to communication with all levels of employees, clients and general contractors, • Strong public speaking skills, • Strong computer skills, including CADD and Microsoft Office Products, such as Excel, • Four-year degree in Engineering or related field, • PE License required, • 7 - 10 years proven design experience that matches the duties and behavior/leadership skills listed above

Job Description Structural Integrity Associates, Inc. is recruiting an Engineering Intern! Join our team in the Critical Infrastructure business unit and gain valuable experience working with our subject matter experts. We operate in a variety of industries including design and maintenance of civil infrastructure, nuclear power, healthcare, dams and waterways, defense, pressure vessels and piping, and mechanical and electrical components. WHAT YOU’LL DO: • Develop analytical models and/or finite element meshes to facilitate structural analysis, • Design/analysis structural calculations, by hand or using structural analysis software WHO YOU ARE: • Graduate student working in civil or structural engineering, • Experience in 3-D drafting/modelling software (e.g. SolidWorks), • Completed coursework in solid mechanics, steel, concrete, and/or seismic design, • Strong communication skills, • EIT certification a plus TERM & LOCATION: • 2025/2026 School Year (Part-Time Intern/Co-op), • Atlanta, GA, • Denver, CO, • Sacramento, CA, • San Diego, CA xGKes0DCKZ

Job Description Apian Consulting Inc is looking for Engineering Drafters to join one of our Engineering Drawings Verification and Development Projects with the California Department of Water Resources (DWR). Candidates will need to be comfortable performing the following tasks: 1. Perform on-site reviews and update DWR mechanical, electrical, and civil systems, engineering drawings., 2. Prepare conceptual phase models and plans for DWR O&M Projects., 3. Convert a raster image (i.e., a .jpg, .tiff, .cit, or other) into a full vector graphic drawn to scale in .dwg format., 4. Perform final review of O&M civil, mechanical, and electrical engineering drawings to ensure the engineering standards are met Positions are currently available in the following locations: • Sacramento, • Tracy, • Bakersfield

Job Description Commercial Solar CAD Designer Specific Responsibilities • Design and/or revise residential plan sets for photovoltaic and battery systems utilizing CAD. Plan sets include electrical schematics, structural details, and equipment specifications. System installations may include commercial projects., • Meet design department production goals and timelines., • Work with building departments, utilities, or other AHJ to ensure compliance with local and national codes., • Knowledge of electrical design, theory and concepts., • Work with and provide technical assistance to designers, estimators, customers, and other divisions to acquire accurate information., • Maintain current knowledge of the NEC and all building codes applicable for proper solar system design., • Able to work in a team environment., • Knowledge of commercial construction., • Preferred BS in mechanical, civil, or electrical engineering, or other related discipline, or equivalent work experience., • Minimum 2-3 years commercial solar CAD experience., • Well versed in Microsoft Office and Auto CAD., • Knowledge of residential and commercial solar and battery systems and design., • Knowledge of electrical design theory and concepts., • Ability to multi-task and manage numerous projects simultaneously., • Strong written and verbal communication skills., • Previous management experience., • Must be self-driven, highly motivated. Must be goal and task oriented., • Team player with a great attitude.