Mechanical engineering jobs in Savannah, GeorgiaCreate job alerts

Job Summary Details: The Electrician is responsible for performing a variety of electrical tasks safely, including installing, troubleshooting, maintaining, testing, repairing and installation in large commercial projects. Pay: $25 - $30/hour The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Location: Gulfstream Facilities, Savannah, GA Hours: 7:00am - 3:30pm- 1st Shift Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ___ | (Programa de Beneficios de ABM) Essential Functions • Inspects, repairs, troubleshoots, installs, modifies, and maintains electrical systems, circuits and equipment., • Must have knowledge of and experience working with electrical systems ranging from 120V – 480V, • Knowledge of working with ballast lighting, • Diagnoses malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem., • Connects wires to circuit breakers, transformers, or other components., • Inspects electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes., • Advises management on whether continued operation of equipment could be hazardous., • Reads, interprets, and works from diagrams, blueprints, sketches, repair manuals, and schematics., • Demonstrates a thorough knowledge of National Electrical Codes., • Possesses knowledge of tools, equipment, and materials used in electrical trade., • Must be safety conscious and work safely within a team-oriented environment., • Performs other duties as assigned., • Willingness to Work at Various Heights: The ideal candidate must be comfortable working in elevated environments. This includes tasks that may require being at different heights for extended periods., • Ladder Climbing: Regular climbing of ladders is a critical part of this position. The candidate must be capable of safely ascending and descending ladders of various sizes and types., • Utilizing Various Lifts: Proficiency in operating a range of lifts is essential. This involves maneuvering scissor lifts, boom lifts, and other mechanical devices to reach higher areas., • Perform other duties as assigned. Minimum Education and/or Experience Requirements • High School Diploma / GED, • 5+ years commercial or industrial electrical maintenance experience, • Must have experience with commercial and industrial power distribution systems, including 120/208V and 277/480V configurations, • Knowledge of a variety of building maintenance procedures and techniques., • Knowledge of occupational hazards and safety precautions., • Skill in using hand and power tools., • Must be authorized to work in the US A good job for someone just entering the workforce or returning to the workforce with limited experience and education. Military and veteran friendly employer, veterans and candidates with military experience encouraged to apply Military Occupational Specialty Code: 51R, 6370, 1141 #LI-TA #300 About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit . ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ABM does not accept unsolicited resumes.

RS AMT III A&P - Special Missions in GAC Savannah Unique Skills: Must be able to work weekend shift G550 experience preferred Education and Experience RequirementsHigh School Diploma or GED required. 3 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring accuracy and skill.Job Description Principle Duties and Responsibilities: Essential Functions: • Perform required. maintenance and necessary servicing of all aircraft mechanical systems ., • Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems., • Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 229831 Category: Service Center Percentage of Travel: Up to 25% Shift: Weekend Days Employment Type: Full-time Posting End Date: 03/09/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Maintenance Technician IV A&P - Flight Test in GAC Savannah Unique Skills: na Education and Experience RequirementsHigh School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring a high degree of accuracy and skill.Job Description Principle Duties and Responsibilities: Essential Functions: • Perform required. maintenance and necessary servicing of all aircraft mechanical systems ., • Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems., • Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 229829 Category: Service Center Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 01/09/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

\n \n \n The General Maintenance Technician will complete assigned preventive maintenance and reactive maintenance to equipment and facilities in a safety-conscious and team-oriented environment. The candidate will need to have a general understanding of mechanical, plumbing, electrical, painting, HVAC, and housekeeping of mechanical areas. \n Location: Gulfstream Facilities, Savannah, GA \n Pay: $18 – $27/hour \n The pay listed is the salary range for this position. Any specific offer will vary based on the successful applicant’s education, experience, skills, abilities, geographic location, and alignment with market data. \n Benefit Information: \n \n \n ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM \n ABM 2025 Employee Benefits (Frontline) | Programa de Beneficios de ABM (2025) \n \n \n \n \n Essential Functions: \n \n • Troubleshoots minor maintenance problems involving electrical, structural, plumbing, and equipment repair or replacement.\n, • Performs routine plumbing repairs such as unstopping toilets, sinks or urinals, fixing water leaks, leaking faucets, and water fountains.\n, • Complete assigned preventive maintenance and reactive maintenance repairs requiring conveyor, mechanical, plumbing, electrical, instrumentation, HVAC and other equipment, systems or structures \n, • Performs routine electrical repairs such as changing light bulbs or fluorescent lamps and assists in repairing ballast and light fixtures.\n, • Performs routine HVAC filter changes. \n, • Completes assigned preventive maintenance and reactive maintenance.\n, • Responsible for housekeeping of mechanical areas as well as other equipment, systems or structures.\n, • Willingness to Work at Various Heights: The ideal candidate must be comfortable working in elevated environments. This includes tasks that may require being at different heights for extended periods.\n, • Ladder Climbing: Regular climbing of ladders is a critical part of this position. The candidate must be capable of safely ascending and descending ladders of various sizes and types.\n, • Utilizing Various Lifts: Proficiency in operating a range of lifts is essential. This involves maneuvering scissor lifts, boom lifts, and other mechanical devices to reach higher areas.\n, • Perform other duties as assigned.\n \n \n Minimum Education and/or Experience Requirements \n \n • High School Diploma / GED\n, • 1-2 years commercial or industrial maintenance experience \n, • Knowledge of a variety of building maintenance procedures and techniques.\n, • Knowledge of occupational hazards and safety precautions.\n, • Skill in using hand and power tools.\n, • Must be authorized to work in the US\n \n \n \n \n \n A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 91E, 91C, EM, HT, MK, DC, 1161, 1341, 3E1X1\n \n \n \n \n #LI-TA \n #200 \n \n\n\n \n About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit . ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ABM does not accept unsolicited resumes.

RS AMT III A&P in GAC Savannah Unique Skills: AMT position with a focus in Avionics. Must have the ability to read and interpret avionics drawings/schematics and perform assigned tasks with minor guidance. Must be able to work any shift as directed by Manager. Education and Experience RequirementsHigh School Diploma or GED required. 3 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring accuracy and skill.Job Description Principle Duties and Responsibilities: Essential Functions: • Perform required. maintenance and necessary servicing of all aircraft mechanical systems ., • Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems., • Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 228420 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 10/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS AMT Team Lead A&P - Weekend Nights in GAC Savannah Unique Skills: This position is for 5th shift/weekend nights. Education and Experience RequirementsHigh School Diploma or GED required. 10 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 4 years of relevant Gulfstream aircraft experience. A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Plan and coordinate various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Provide work directions to technicians performing aircraft maintenance and troubleshooting and repair duties.Job Description Principle Duties and Responsibilities: Essential Functions: • Ensure required. maintenance and necessary servicing of all aircraft mechanical systems ., • Lead the repair, maintenance, installation, and troubleshooting of mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Ensure completion of work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems., • Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 228798 Category: Service Center Percentage of Travel: Up to 25% Shift: Weekend Nights Employment Type: Full-time Posting End Date: 10/03/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-JC1

RS AMT Team Lead A&P - Weekday Nights in GAC Savannah Unique Skills: Must be able to work 2nd shift Gulfstream Service Center experience is preferred Leadership experience is preferred Familiar with 650 and newer models is a plus Engine Run and Taxi on 650 or newer models is a plus Education and Experience RequirementsHigh School Diploma or GED required. 10 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 4 years of relevant Gulfstream aircraft experience. A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Plan and coordinate various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Provide work directions to technicians performing aircraft maintenance and troubleshooting and repair duties.Job Description Principle Duties and Responsibilities: Essential Functions: • Ensure required. maintenance and necessary servicing of all aircraft mechanical systems ., • Lead the repair, maintenance, installation, and troubleshooting of mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Ensure completion of work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems., • Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 228802 Category: Service Center Percentage of Travel: Up to 25% Shift: Second Employment Type: Full-time Posting End Date: 10/03/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-JC1

RS AMT IV A&P in GAC Savannah Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world’s finest aviation experience starts with our people and when our people thrive, so does our mission. This requisition is generated for all Savannah service centers and candidates must be able to work any shift. Education and Experience RequirementsHigh School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring a high degree of accuracy and skill.Job Description Principle Duties and Responsibilities: Essential Functions: • Perform required. maintenance and necessary servicing of all aircraft mechanical systems ., • Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems., • Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 228960 Category: Service Center Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 12/19/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS AMT Team Lead A&P - 4th Shift in GAC Savannah Unique Skills: This position is for 4th shift/Weekend Days. Solid dependable leader, quality and safety is a must, this will be a working lead. Good people skills and able to motivate a team to be proficient and efficient. Education and Experience RequirementsHigh School Diploma or GED required. 10 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 4 years of relevant Gulfstream aircraft experience. A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Plan and coordinate various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Provide work directions to technicians performing aircraft maintenance and troubleshooting and repair duties.Job Description Principle Duties and Responsibilities: Essential Functions: • Ensure required. maintenance and necessary servicing of all aircraft mechanical systems ., • Lead the repair, maintenance, installation, and troubleshooting of mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Ensure completion of work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems., • Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 229325 Category: Service Center Percentage of Travel: Up to 25% Shift: Weekend Days Employment Type: Full-time Posting End Date: 11/28/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS AMT V A&P in GAC Savannah Unique Skills: This requisition is generated for all Savannah Service Centers and candidates must be able to work any shift assigned by their Manager. At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world’s finest aviation experience starts with our people and when our people thrive, so does our mission. Education and Experience RequirementsHigh School Diploma or GED required. 8 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 4 years of relevant Gulfstream aircraft experience. A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Demonstrate expertise in aircraft maintenance and perform troubleshooting and repair duties requiring a high degree of accuracy and skill.Job Description Principle Duties and Responsibilities: Essential Functions: • Perform required. maintenance and necessary servicing of all aircraft mechanical systems ., • Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Act on behalf of Lead, as needed ., • Coordinate movement of aircraft, as required. ., • Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems., • Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 229173 Category: Service Center Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 10/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS AMT II A&P in GAC Savannah Unique Skills: Must be willing to work any shift. Education and Experience RequirementsHigh School Diploma or GED required. 2 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring accuracy and skill.Job Description Principle Duties and Responsibilities: Essential Functions: • Perform required. maintenance and necessary servicing of all aircraft mechanical systems ., • Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Knowledge of inspection and maintenance procedures for various aircraft models and systems., • Knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 228845 Category: Service Center Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 10/01/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS AMT II A&P - 2nd Shift in GAC Savannah Unique Skills: Position is for 2nd shift/Weekday nights - Mon through Thursday 4/10s. Education and Experience RequirementsHigh School Diploma or GED required. 2 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring accuracy and skill.Job Description Principle Duties and Responsibilities: Essential Functions: • Perform required. maintenance and necessary servicing of all aircraft mechanical systems ., • Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Knowledge of inspection and maintenance procedures for various aircraft models and systems., • Knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 229354 Category: Service Center Percentage of Travel: Up to 25% Shift: Second Employment Type: Full-time Posting End Date: 12/08/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

1\. Role Overview Mercor is collaborating with a leading AI research lab on a project to advance engineering problem-solving at the frontier of artificial intelligence. We are seeking experienced engineers with strong backgrounds in analytical problem design, real-world systems modeling, or competitive engineering problem-solving (university competitions, design challenges, or advanced coursework). The goal of this project is to create novel, rigorous, and multi-step engineering problems that challenge cutting-edge AI models—specifically those that cause the AI to fail or demonstrate reasoning limits—while supporting the improvement and training of advanced AI systems. This is a short-term, high-impact, fully remote opportunity for engineering professionals eager to apply their deep technical expertise to frontier AI research, with the possibility of project continuation based on performance. ## 2\. Key Responsibilities - Design original, advanced engineering problems that require creative reasoning, multi-domain integration, and precise analytical thinking. - Evaluate AI-generated engineering solutions for technical accuracy, completeness, and adherence to physical and practical constraints. - Identify logical gaps, incorrect modeling assumptions, or computational inaccuracies. - Provide complete, clear, and well-documented solutions and derivations using LaTeX formatting for equations and schematics. - Maintain high standards of technical precision, rigor, and conceptual depth. ## 3\. Required Qualifications Note: Applicants must be proficient in creating and formatting technical documents using LaTeX. You are a strong fit for this project if you have one or more of the following: - Advanced degree (or equivalent experience) in mechanical, electrical, civil, aerospace, or chemical engineering, or a related field. - Experience designing or grading complex analytical or design-focused problems (university level or professional exams). - Participation in or mentorship for engineering design or modeling competitions is preferred(e.g., Formula SAE, Shell Eco-marathon, ASME/IEEE/AIChE contests, robotics challenges, or design sprints). - Research or teaching experience involving applied problem formulation and quantitative modeling. Other qualifications: - Deep understanding of core engineering principles and real-world systems. - Ability to communicate step-by-step reasoning, assumptions, and derivations clearly. - Strong intuition for problem difficulty, structure, and conceptual progression. - Detail-oriented verification of results and internal consistency. ## 4\. More About the Opportunity - Time commitment: Minimum 20 hours/week; up to 40 hours/week available - Duration: Approximately 2 months, with strong potential for extension - Rolling onboarding; start typically within 1–2 days after approval ## 5\. Compensation & Contract Terms - $60–80 per hour, depending on experience and demonstrated performance - Open to contributors worldwide (English proficiency required) - Independent contractor arrangement - Weekly payments via Stripe Connect ## 6\. Application Process 1. Submit your resume or CV highlighting your engineering background and relevant accomplishments. 2. Participate in a short interview (20–30 minutes). 3. Complete a brief form outlining your experience with problem design, engineering challenges, or teaching. 4. Selected applicants will receive follow-up steps within a few days. ## 7\. About Mercor Mercor is a talent marketplace connecting top professionals with leading AI research organizations and technology labs. Its investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey. Thousands of professionals across science, engineering, and research disciplines have partnered with Mercor to contribute to frontier AI initiatives shaping the next era of innovation. We encourage all qualified applicants to apply. Mercor provides equal opportunity and reasonable accommodations upon request.

Job Title: Structural Engineer The Civil/Structural Engineer will lead the development, coordination, and review of structural and civil design packages for medium to large capital projects in heavy industrial environments. This role requires the ability to work independently or within cross-functional teams while managing project scopes with a strong focus on schedule, budget, quality, and safety. The engineer will guide design efforts both internally and through external engineering partners, ensuring structural integrity and compliance throughout all phases of project execution. Key Responsibilities • Lead, prepare, and review structural and civil design packages to ensure compliance with project requirements, standards, and codes., • Develop engineering sketches into complete construction documents, including plans, sections, and detailed drawings., • Coordinate design activities across internal disciplines—civil, structural, mechanical, architectural—and with third-party engineering firms to ensure aligned and timely delivery., • Conduct technical reviews to ensure design accuracy, constructability, cost-effectiveness, and compliance with safety and regulatory requirements., • Ensure all design work meets required QC standards and applicable building codes., • Participate in PHA/HAZOP reviews and collaborate with Safety and Environmental teams to support risk mitigation., • Provide construction-phase support by responding to RFIs, reviewing submittals, and conducting on-site field inspections., • Maintain thorough engineering documentation, including calculations, reports, and specifications., • Support project planning activities by evaluating and communicating design impacts on cost, schedule, and resources. Qualifications Education: • Bachelor’s Degree in Civil Engineering or Structural Engineering (required). Experience: • Approximately 10+ years of experience in heavy industrial structural design and layout., • Proven ability to lead and manage design efforts across multidisciplinary teams., • Proficiency with 3D modeling tools for concrete and steel structures such as Bentley 3D, AVEVA E3D, AutoCAD ProStructure, or CaddWorx., • Strong understanding of structural standards, engineering principles, and building code requirements. Licenses & Certifications: • Professional Engineer (PE) license preferred (or specify if required). Knowledge, Skills & Abilities: • Highly organized with the ability to manage multiple concurrent projects., • Strong written, verbal, and presentation communication skills., • Results-driven with strong analytical and problem-solving abilities., • Ability to work independently and collaboratively in team environments., • Solid understanding of cost and schedule impacts associated with design decisions., • Willingness to travel frequently (up to 50%).

Mercor is seeking PhD holders, doctoral candidates, and outstanding Master’s graduates in physics and related disciplines to join a high-impact AI research initiative in partnership with a leading artificial intelligence lab. * * * ### Key Domains Here is a list of domains. If you belong to or have expertise in one or more of them, feel free to apply — we’re excited to have you on the team! Fundamental Physics: Theoretical Mechanics, Theoretical Optics, Statistical Mechanics, Thermodynamics, Fluid Physics, Optics and Acoustics Modern & Applied Physics: Electromagnetism and Photonics, Atomic and Molecular Physics, Solid State Physics, Semiconductor Physics, Biophysics Space and Cosmological Sciences: Astrophysics and Cosmology Engineering Disciplines: Electrical Engineering, Control Theory and Control Engineering, Mechanical Engineering * * * ### Key Responsibilities - Evaluate scientific correctness, conceptual rigor, and depth of LLM-generated responses across physics and engineering topics. - Review outputs involving mathematical modeling, experimental methods, and theoretical frameworks in physics. - Identify factual errors, reasoning flaws, and conceptual misunderstandings in model outputs. - Benchmark model performance on advanced physics and applied engineering problems. - Work independently and asynchronously using proprietary evaluation tools. * * * ### Requirements - PhD (candidate/recipient) or Masters in Physics, Applied Physics, Electrical or Mechanical Engineering, or a closely related field. - Strong command of graduate-level physics and mathematical reasoning. - Excellent written communication and analytical abilities. - Ability to work independently in a remote, asynchronous setting. - Strong proficiency in Python, particularly for scientific analysis and model evaluation, is required. * * * ### Role Details - Part-time (20 hours/week) - Remote and asynchronous work environment - Flexible schedule to accommodate global contributors * * * ### Compensation - Contractor position via Mercor - $20–$30/hour, depending on expertise and domain depth - Weekly payments through Stripe Connect * * * ### About Mercor Mercor is a San Francisco-based company connecting top professionals with leading AI initiatives. Investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey.

Job Description Other positions available at this location: • Final Line Mechanic I, II, & III, • Sr. Aircraft Tech, • Avionics Tech, • Structure Mechanic, • Cabinet Finisher I & II, • Composite Bonder, • Interior Installer, • Aircraft Painter Job Description • High School Diploma or GED required., • 5 years aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc., • Two (2) years Gulfstream aircraft experience preferred. In a team-oriented work environment, perform aircraft installation of parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specifications, and operational requirements to complete work assigned through final inspection, and assure conformance to specifications. Train other team members in methods and procedures. May serve as an acting Team Coordinator as required. Essential Functions: • Perform the most complex structure or aircraft installations, repairs, rework or tests, requiring familiarity with all functions of components and systems to be installed; ensure all parts/assembly meet requirements., • By using proper documentation and control, manage all parts and disposition of parts in assigned workstation., • Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems., • Coordinate work with other departments to ensure smooth workflow., • Responsible for quality and efficiency of own installations; make repairs per discrepant material tags, material review request; performs necessary work to ensure installations meet conformity., • Use a variety of tools and equipment to successfully complete component installation., • Troubleshoot mechanical and structural problems., • Update and sign required logs and records as required., • May be required to plan and organize workloads and resource requirements., • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations., • Demonstrate Gulfstream Manufacturing competencies in the employee effectiveness review., • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. Perform other duties as assigned. Other Requirements: • Must be able to use mathematical formulas by solving dimensional; problems using fractions, decimals and whole numbers., • Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance., • Production Quality training., • Solumina and Smarteam experience preferred., • Requires ability to read and interpret basic blueprints and schematic diagrams., • Must be skilled in close tolerance work and have knowledge of use of special tools and ability to perform close tolerance work such as drilling, reaming, ship fitting parts, etc. Must be able to use all tools required to do the job., • Ability to operate hydraulic mule pumps, tools, fixtures, and jigs., • Must be able to climb ladders and stairs, work in small-space restricted areas and lift up to 50 lbs., • A&P license preferred Per diem * Pay rate is based on experience and can range from $25.00 to $40.00 for others * Time and a half on overtime * Tools required Company DescriptionAt Astro Dynamic Group, our mission is to empower businesses by connecting them with top-tier talent who excel in their fields. We drive growth, innovation, and success by matching exceptional candidates with companies in need. Our goal is to build long-lasting partnerships rooted in trust, expertise, and mutual benefit.At Astro Dynamic Group, our mission is to empower businesses by connecting them with top-tier talent who excel in their fields. We drive growth, innovation, and success by matching exceptional candidates with companies in need. Our goal is to build long-lasting partnerships rooted in trust, expertise, and mutual benefit.

Job Description Job Title: HVAC Service Technician Status: Full Time, Non-Exempt (Eligible for overtime) Reports To: Service Manager or Manager of Technical Operations Work Schedule: Monday – Friday- based on customer needs Position Purpose: The primary purpose of the HVAC Service Technician is to provide preventative maintenance, start-up, warranty, and repair services on light commercial and industrial air conditioning equipment. Strong emphasis on customer service. This position may occasionally involve after hour call outs in order to provide emergency repairs. Hoffman Mechanical Solutions, Inc. is a company focused on being #1 in the HVAC industry in providing the most innovative HVAC solutions through superior design and customer service. HVAC Service Technician Essential Duties and Responsibilities: • Service a variety of HVAC products and equipment and ensure customer satisfaction., • Read and understand blueprints, equipment manuals, and engineering specifications in order to properly diagnose and repair units., • Use a variety of hand-tools and specialty equipment typical of the commercial HVAC Service trade., • Identify, analyze, diagnose, and repair systems and products at customer’s location., • Survey customer site for properly operating equipment and report any deficiencies found. Provide sales leads to internal associates as necessary., • Perform preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepare in advance for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating various trades for on-site work., • Diagnose/troubleshoot inoperable equipment and develop action plan for repairs and problem resolution., • Determine replacement parts required, secure materials, and complete repairs on a timely basis. Return any non-used or refundable parts for credit., • Interact face to face with customers to ensure proper and accurate communications exist., • Document all work performed by accurately completing field service reports, equipment log sheets, etc., • Complete and submit all required paperwork on a timely basis., • Operate and be diligent in properly caring for and maintaining a company vehicle., • Provide technical support to customers., • Flexible to work overtime/weekends as necessary in order to meet customer requirements., • Limited travel required but may include occasional overnight stays., • Stay informed on industry news and trends, products, services, competitors and relevant information about existing and emerging technologies, and the latest product-line developments. Attend company training seminars to become familiar with product lines., • Conduct oneself in a professional manner as a positive representative of the company both to the customer and public. Knowledge / Experience / Critical Skills • Education/Experience – Associate’s Degree or equivalent from a Technical / Trade School with a certificate in Heating, Ventilation, and Air Conditioning., • Minimum of Three (3) years related experience preferred., • Operational knowledge of computers and Microsoft Office software preferred., • Ability to read, comprehend, and write simple instructions and short correspondence. Ability to effectively present information in one-on-one and small group situations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to understand data presented in a graphical format such as pie charts, bar graphs, etc., • Ability to recognize problems and develop the most cost effective solution. Ability to collect data, establish facts, and draw valid conclusions., • Must pass pre-hire requirements including background check, motor vehicle report, and drug screening., • Must possess valid drivers’ license., • Must possess EPA mandated card for safe refrigerant handling. Universal certification preferred. Physical Demands • In order to properly perform the duties of this job, the employee is regularly required to stand, use hands in order to finger/grasp/handle/feel, talk, and hear. The employee frequently is required to walk, reach, stoop, kneel, crouch, and/or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. This positions requires close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions, Inc. No phone calls or drop-ins, please. EEO Employer/Vets/Disabled

Job Description Title: Maintenance Technician Reports to: Maintenance Supervisor Department: Maintenance FLSA: Non-exempt hourly JOB DESCRIPTION Summary of Position: Apply both electrical and mechanical related knowledge to test, diagnose, maintain, repair and modify developmental or operational machinery and control equipment and circuitry in facility. Work requires an in-depth knowledge of various trades. Performs a wide variety of electrical and electronic maintenance and mechanical service work on sophisticated electronic equipment, machines and/or controls. Diagnoses and remedies troubles, repairs and replaces equipment. Installs, maintains, and/or repairs equipment. Duties and Responsibilities (but not limited to): • Inspects and checks equipment for proper operating condition, makes necessary adjustments, logs test readings, and maintains, repairs, or replaces all essential equipment parts, • Familiar with machine networking process, • Capable of working with outside contractors for trouble shooting procedures, • Understanding of CNC machining programming and operation, • Self-motivated person that works with little direction, • Understanding urgency to trouble shoot machines and bring production back on line, • Performs miscellaneous maintenance duties as required, • Read blueprints, hydraulic and pneumatic schematics, mechanical/electrical diagrams, and technical orders to determine methods and sequences of assembly, • Align, fit, and assemble component parts, using hand tools, power tools, fixtures, templates, • Operate metalworking machines to fabricate housings, jigs, fittings, and fixtures, • Repair, rework, and calibrate hydraulic and pneumatic assemblies and systems to meet operational specifications and tolerances, • Prepare parts sketches and write work orders, • Review project instructions and specifications to identify, modify and plan requirements fabrication, assembly and testing, • Devise, fabricate, and assemble new or modified mechanical components for products such as industrial machinery or equipment, and measuring instruments, • Analyze test results in relation to design or rated specifications and test objectives, and modify or adjust equipment to meet specifications, • Confer with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information, • Research, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles, • Investigate equipment failures and difficulties to diagnose faulty operation, and to make recommendations, • Oversee installation, operation, maintenance, and repair to ensure that machines and equipment are installed and functioning according to specifications, • Conduct research that tests and analyzes the feasibility, design, operation and performance of equipment, components and systems, • Perform preventative maintenance and calibration of equipment and systems, • Identify and resolve equipment malfunctions, working with manufacturers and field representatives as necessary to procure replacement parts, • Maintain system logs and manuals to document testing and operation of equipment, • Strict adherence to lock out tag out procedures Qualifications: • 5+ years of experience in the electrical and/or mechanical maintenance field, • Requires experience in electrical installation and maintenance work on plant electrical systems and equipment, • Requires experience in mechanical installation and maintenance work on plant systems and equipment, • Requires experience in hydraulics and pneumatics Education: • Degree in related technical field is a plus, but not required. Skills and Knowledge: • Requires a broad knowledge of controls and mechanisms, • Proficient in PLC programming and troubleshooting, • Experienced with remote IO design and operation, • Experienced with robot programming and troubleshooting, • Experienced with AC/DC drive motor operation, adjustment, and troubleshooting, • Maintain working knowledge of state-of-the-art tools or software by reading or attending conferences, workshops or other training, • The ability to work in a team environment, which includes being self-motivated, accepting responsibilities, completing assigned action items, and participating in a proactive manner in all team events, • Effective communication skills, both verbal and written., • Ability to coordinate multiple projects with strong prioritization skills., • Excellent problem-solving, critical thinking, reasoning, and analytical skills., • Ability to quickly adapt in a constantly evolving, growing environment. Physical Demands: The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Heavy walking and standing throughout the shift, • Must be able to lift, push, pull up to 75 pounds on a regular basis, • Regularly required to talk and hear, • Required to bend at the knees and waist, • Frequently required to sit, crouch, stoop, lean, climb,, • Required to use hands to type, handle objects and paperwork, • Required to reach and hold on to items at chest level or reach above the shoulder, • Required to use close vision, peripheral vision, focus and see colors as required to read equipment and material labels, color-coded inventory, computer terminal screens, etc., • May be required to wear safety Personal Protective Equipment for eyes, face, head, feet, hearing, hands and arms., • Be willing to travel for training if required (in-state), • Ability to work extended hours, overtime and/or weekends as required The employee generally works in warehouse, manufacturing, and indoor office environments but occasionally works outside, in all types of weather and on uneven terrain. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Hyundai Transys Georgia Seating System is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Hyundai Transys Georgia Seating System is committed to achieving a diverse workforce through application of its equal opportunity, non-discrimination, anti-harassment policies in all aspects of employment including recruitment, hiring, promotions, transfers, discipline, terminations, wage and salary administration, benefits, and training. All employment decisions at Hyundai Transys Georgia Seating System are based on business needs, job requirements and individual qualifications without regard to race, color, religion or belief, sex, sexual orientation, gender identity, family or parental status, national origin, veteran status, disability or any other status protected by the laws or regulations in the locations where we operate.

Job DescriptionJob Title: Industrial Controls Engineer Position available in: Savanah, GA Job Type: Full time Positions Available: 2 Broetje Automation is the world’s leading expert & OEM in aircraft manufacturing automation and robotics, working with the top names in our industry. Worldwide locations include: Germany, USA, France, United Kingdom, China, and Japan. US locations include: Charleston (SC), Savannah (GA), Wichita (KS), and Seattle (WA). Compensation/Benefits: • Competitive hourly wage, ranges $34.00 – 43.00/hour, plus overtime & shift differential, • 6% 401(k) company match, no vesting period, • 100% paid healthcare coverage (medical, dental, vision), • Disability plan & group life insurance program, • 3 weeks Paid Time Off (PTO) plus 13 paid holidays, including 3 floating holidays, • Tuition reimbursement program, up to $10,000/yr, • BS in Electrical, Controls, Mechatronics, or Electro-Mechanical Engineering preferred, BS in Computer Science, or comparable experience with industrial robotics or machine tools., • Technical Certificate OR BS in Electrical/Mechanical Engineering, and 3+ years of experience within the industrial automation industry or equivalent experience., • Strong mechanical aptitude from prior professional experience., • Siemens Step 7 PLC troubleshooting experience, • Siemens TIA Portal; Sinumerik One, • CNC troubleshooting experience, • Experience in IEC61131 (PLC programming languages), • Strong fundamental understanding of electrical design practices, machine/motion control systems, electro-mechanical systems, robotics, programming, and system integration, • Understanding of PLC programming languages, • Experienced in troubleshooting electrical control panels, • CNC troubleshooting experience, • Knowledge of NC Controllers: Siemens 840D or WINCC, • Experience using precision measurement equipment (i.e. Dial indicators, calipers, etc., • Willing to travel to customer sites (50-70% travel expected), • Willing to work evenings, weekends, and overtime., • Experience with aerial platforms, working with heights., • Provide electrical and controls engineering expertise in support of new equipment & system introductions, • Internal subject matter expert in control systems (Siemens PLC, HMI, Motion Control Systems), system integration, sensors, & electromechanical devices, • Apply knowledge of electronics, electrical circuits, mechanics, pneumatics, hydraulics, and programming, • Travel to customer sites for machine commissioning and troubleshooting support Powered by JazzHR 5fL94bYcC3

Job DescriptionDescription: We are currently seeking a Chief Engineer for our hotel that enjoys resolving problems, working with their hands, and general building maintenance. This position may require flexible scheduling availability. Requirements: Job Requirements: • Troubleshooting and repairing malfunctions in electrical/mechanical/plumbing systems & other hotel equipment, • Conducting ongoing room preventative maintenance, • Resolving maintenance problems, complaints, and work orders to prioritize and schedule work, • Carpentry and painting skills, as well as drywall and carpet repair work, is a plus, • Inspecting property to identify potential and current needs, • Ensuring department expenditures meet budget requirements, • Soliciting bids from contractors and evaluating their proposals with hotel management, • Coordinating with local health, safety, fire, and building inspectors to ensure compliance with applicable codes and regulations, • Ensure pool is properly maintained to include cleanliness and chemical content, • Maintaining the building exterior if not serviced by a contractor (e.g. lawn care, painting, etc), • Supervising and scheduling of maintenance staff, • Maintain guest satisfaction scores at brand standard or higher and all Internal Audit/Corporate standards set forth by Island Hospitality Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations and follow all safety procedures while working, • Ability to extend professionalism and courtesy to guests at all times, • Prior hotel maintenance experience of at least 4 years or more is a plus, • Previous experience in management of maintenance/engineering specific to electrical, plumbing,, • HVAC system, ventilation system, and carpentry., • Working knowledge and experience with swimming pool maintenance., • Experience ordering supplies and inventory, • Valid Driver's License required The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job DescriptionDo you want to be part of a growing, well established, family friendly company? Samet, headquartered in Greensboro, NC is looking for experienced, hardworking, dynamic people to join our team.Our culture is built on teamwork and innovation. We encourage our Associates to be empowered when making decisions, and they can be confident that their voice will be heard.Do you want to be part of a growing, well established, family friendly company? Samet, headquartered in Greensboro, NC is looking for experienced, hardworking, dynamic people to join our organization on our Precon team in Savannah, GAOur culture is built on teamwork and innovation. We encourage our Associates to be empowered when making decisions, and they can be confident that their voice will be heard. As a Senior Estimator / Preconstruction Project Manager for Samet, you will: • Prepare detailed cost estimates, quantitative surveys, life cycle cost analysis studies and value engineering studies of mechanical/plumbing/electrical systems for institutional, commercial and/or industrial related facilities, • Assist other Samet team members with preparing civil, architectural and/or structural preconstruction related services, as required, • Assist in developing the CPM project schedule, • Prepare written scopes of work, detailed plan and specification reviews, • Conduct field inspections and coordination of project deliveryPreconstruction Project Manager Qualifications:, • A BS degree in a construction related field is required (civil engineering, construction management, construction technology, etc.), • 10-12 years of Estimating in a construction environment, • A working knowledge of Sage Estimating Software is preferred, • Previous experience in estimating/project management is preferred, • Experience in preparing detailed energy modeling studies is preferred, • LEED Accredited Professional is preferred, • Primavera software scheduling experience is a plus, • Thorough working knowledge of MS Office software including MS Word, MS Excel is required, • Parental leave, • Tuition reimbursement, • Health & wellness challenges and incentives, • Generous paid time off and holidays, • Flexible spending account, • 401(k) with company match, • Career Path, • Health (HSA & traditional), Dental, Vision, and Life Insurance E-Verify

AMT IV A&P in GAC Savannah Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world’s finest aviation experience starts with our people and when our people thrive, so does our mission. Education and Experience RequirementsHigh School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring a high degree of accuracy and skill.Job Description Principle Duties and Responsibilities: Essential Functions: • Perform required. maintenance and necessary servicing of all aircraft mechanical systems ., • Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems ., • Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements ., • Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner ., • Ensure that all work accomplished meets quality standards and specifications ., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely ., • Follow standard operating procedures and JSAs when operating ground support equipment ., • Operate and oversee use of special support equipment used in removal and installations of major components ., • Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: • Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean ., • Properly use and maintain company-provided tools and equipment ., • Coordinate movement of aircraft, as required. ., • Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: • Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems., • Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Requisition Number: 229817 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 12/27/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Job Description GSH is now hiring Licensed HVAC Technicians in Savannah, GA. Applicants are eligible for a signing bonus upon being hired. George S. Hall, Inc., a leading provider of facilities services, and in partnership with our client in Savannah, GA, is looking for Heating, Ventilating, and Air Conditioning Technicians skilled in the maintenance and operation of large axial fans and motorized dampers. The successful candidate will be responsible for routine maintenance, troubleshooting, repair and operations associated with general HVAC systems. Established in 1895, GSH provides integrated facilities management solutions to the marketplace. We deploy our talented and experienced facilities professionals to manage, operate, and maintain facilities of all types. GSH delivers innovative solutions to maintain facilities to the highest standards while at the same time achieving cost savings for our clients. GSH’s engineering expertise is second to none in the facilities management sector. We are experts in the field of mechanical services delivering operation, maintenance and repair of heating, ventilation, air conditioning, and refrigeration systems utilizing site-dedicated, licensed stationary engineers and mobile technicians. GSH maintains a diverse and talented workforce of engineers, professionals, and support staff to ensure that we remain at the forefront of the facilities services industry. From novice to expert, GSH employees are ambitious, professional, and accountable. Job Title: Licensed HVAC Technician Job Summary: The HVAC Technician will work in a commercial and industrial environment and is responsible for the operation, maintenance, troubleshooting, and repair of large air handling systems, building automation, and refrigeration systems. Critical Duties and Responsibilities: · Troubleshoot fan controls and damper operations. · Lubrication of moving parts. · Disassemble/assemble fan components, such as blades, motors, shaft bearings, vibration isolation, and electrical connections. · Disassemble/assemble sheet metal and flexible ductwork components and devices used in the transfer of conditioned air. · Measure and mark pipes for cutting or threading. · Cut, thread, or join pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders. · Read and interpret full scale drawings of pipe systems, supports, or related equipment, including plans, sections, details, and one-line system views · Create construction or installation diagrams. · Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints. · Measure materials or objects for installation or assembly. · Inspect, examine, or test installed systems or pipelines, using pressure gauge, hydrostatic testing, observation, or other methods. · Plan pipe system layout, installation, or repair, according to specifications. · Plan layout of construction, installation, or repairs. · Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment. · Install plumbing, heating, refrigeration piping and assemble component devices to construct complete and functioning HVAC systems · Modify, clean, or maintain pipe systems, units, fittings, or related machines or equipment, using hand or power tools. · Clean equipment or facilities. · Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications. · Install automatic controls to regulate water piping systems. · Install gauges or controls. · Shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches. · Identify, remove, and replace worn components. · Remove worn, damaged or outdated materials from work areas. · Inspect work sites to identify potential environmental or safety hazards. · Install fixtures, appliances, or equipment designed to reduce water or energy consumption. · Operate motorized pumps to remove water from flooded manholes, basements, or facility floors. · Maintain heating, chilled, and condenser water system pumps and piping systems. · Operate and maintain other electrical, mechanical, and ventilation systems, vacuum and circulating pumps, and water softeners. Adjust as required and perform preventive maintenance in accordance with prescribed schedules. · Make daily visual safety inspections of mechanical equipment. · Must be able to distinguish problems and anomalies from normal operating parameters and record and report all faults, deficiencies, and other unusual occurrences to shift supervisor. · Maintain records of fuel consumption, maintenance services, repairs, and supplies. Log pertinent data, including discrepancies, report deficiencies to a supervisor immediately for follow-up. · Observe water level, pressures and temperatures and adjust equipment to ensure safe and constant operation of equipment. Perform water quality checks for the heating water, chilled water, and condenser water systems; and update appropriate equipment and system logs. · Possess adequate sight, hearing and speaking capabilities to maintain a safe working condition and be able to distinguish wire colors and component color codes. Requirements: · Must have a High School diploma or equivalent and have five (5) years of practical HVAC maintenance experience Must have basic hand tools to perform the work. Consumables and personal protective equipment are provided by the company. · Must have the ability to write, comprehend, and execute written and oral instructions, in English, and perform basic arithmetic calculations. · Must be able to lift 50lbs and be in good physical health and physically able to climb ladders. · Shall be capable and licensed to drive a motor vehicle. Company DescriptionEstablished in 1895, GSH provides integrated facilities management solutions to the marketplace. We deploy our talented and experienced facilities professionals to manage, operate, and maintain facilities of all types. Our main focus is on delivering innovative solutions to maintain facilities to the highest standards while at the same time also achieving cost savings for our valued clients. GSH’s engineering expertise is second to none in the facilities management sector. We are experts in the field of mechanical services delivering service, maintenance and repair of heating, ventilation, air conditioning, and refrigeration systems through our site-dedicated stationary engineers and mobile workforce of licensed technicians. Our energy-led engineering solution, energyplus, is a complete energy management program which focuses on optimizing the existing mechanical equipment with investments in energy conservation measures. This program delivers genuine cost savings through reduced utility consumption. GSH maintains a diverse and talented workforce of engineers, professionals and support staff to ensure that we remain at the forefront of the facilities services industry. From novice to expert, GSH employees are ambitious, professional, and accountable.Established in 1895, GSH provides integrated facilities management solutions to the marketplace. We deploy our talented and experienced facilities professionals to manage, operate, and maintain facilities of all types. Our main focus is on delivering innovative solutions to maintain facilities to the highest standards while at the same time also achieving cost savings for our valued clients.\r\nGSH’s engineering expertise is second to none in the facilities management sector. We are experts in the field of mechanical services delivering service, maintenance and repair of heating, ventilation, air conditioning, and refrigeration systems through our site-dedicated stationary engineers and mobile workforce of licensed technicians. Our energy-led engineering solution, energyplus, is a complete energy management program which focuses on optimizing the existing mechanical equipment with investments in energy conservation measures. This program delivers genuine cost savings through reduced utility consumption.\r\nGSH maintains a diverse and talented workforce of engineers, professionals and support staff to ensure that we remain at the forefront of the facilities services industry. From novice to expert, GSH employees are ambitious, professional, and accountable.

Job DescriptionJob Title: Field Service Engineer Position available in: Savannah, GA Job Type: Full time Positions Available: 2 Broetje Automation is the world’s leading expert & OEM in aircraft manufacturing automation and robotics, working with the top names in our industry. Worldwide locations include: Germany, USA, France, United Kingdom, China, and Japan. US locations include: Charleston (SC), Savannah (GA), Wichita (KS), and Seattle (WA). Compensation/Benefits: • Competitive hourly wage, ranges $34.00 – 43.00/hour, plus overtime & shift differential, • 6% 401(k) company match, no vesting period, • 100% paid healthcare coverage (medical, dental, vision), • Disability plan & group life insurance program, • 3 weeks Paid Time Off (PTO) plus 13 paid holidays, including 3 floating holidays, • Tuition reimbursement program, up to $10,000/yr, • BS in Electrical, Controls, Mechatronics, or Electro-Mechanical Engineering preferred, or comparable experience with industrial robotics or machine tools., • Technical Certificate OR BS in Electrical/Mechanical Engineering, and 3+ years of experience within the industrial automation industry or equivalent experience., • Strong mechanical aptitude from prior professional experience., • Siemens Step 7 PLC troubleshooting experience, • Siemens TIA Portal; Sinumerik One, • CNC troubleshooting experience, • Experience in IEC61131 (PLC programming languages), • Strong fundamental understanding of electrical design practices, machine/motion control systems, electro-mechanical systems, robotics, programming, and system integration, • Understanding of PLC programming languages, • Experienced in troubleshooting electrical control panels, • CNC troubleshooting experience, • Knowledge of NC Controllers: Siemens 840D or WINCC, • Experience using precision measurement equipment (i.e. Dial indicators, calipers, etc., • Willing to travel to customer sites (50-70% travel expected), • Willing to work evenings, weekends, and overtime., • Experience with aerial platforms, working with heights., • Provide electrical and controls engineering expertise in support of new equipment & system introductions, • Internal subject matter expert in control systems (Siemens PLC, HMI, Motion Control Systems), system integration, sensors, & electromechanical devices, • Apply knowledge of electronics, electrical circuits, mechanics, pneumatics, hydraulics, and programming, • Travel to customer sites for machine commissioning and troubleshooting support Powered by JazzHR GXh8e3pcyO

Job DescriptionSalary: $50,000-$60,000 Annually The Engineering Technician will support Engineering efforts within Preciball, USA. The primary focus will be supporting day to day operations, while gaining an in-depth knowledge of ball manufacturing, damage detection and recognition, as well as ball inspection methods Responsibilities will include but not limited to: Becoming knowledgeable in the following areas: a. Detailed understanding of ball manufacturing b. Operational understanding of all mechanical inspection machines 1. Aviko Scanning Machine- Top Priority, 2. Roller Sorting Machines, 3. Vibratory Bowl Dyring Machine c. Operational knowledge of ball inspection equipment 1. Various diameter gauging devices, 2. Roundness testing machines, 3. Hardness testing machines, 4. Surface finish machines, 5. Recognition of damages and points of occurrence Becoming knowledgeable of overall operations and offer engineering solutions to improve safety and efficiency. Also participate and contribute in Supplier Development efforts to improve the supply base. Qualifications: -Entry level Engineer or Engineering Technology degree, or equivalent experience. -Proven ability to multitask and maintain process for multiple responsibilities. -Proven communication and interpersonal skills. -Experience in Microsoft Office (word & excel) a must. -Experience with ISO-9001:2005 Quality Managment system is a PLUS -Experience in problem solving methods such as "5-Why" is a PLUS -Experience with CAD or other drafting solutions is a PLUS -In depth knowledge of ball manufacturing is a PLUS, but not required.

Job Description Education and Experience Requirements High School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose: Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. Job Description Principle Duties and Responsibilities: Essential Functions: * Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system., • Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems., • Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring., • Performs and complies with engineering changes and modifications as required., • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability., • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection., • Tests and maintains test equipment, electronic systems, and components., • Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Perform other duties as assigned. Other Requirements: * Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. • Ability to read and interpret basic blueprints and schematic diagrams., • Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Once your resume has been submitted, you will be sent a Talogy Placement Assessment to your email that must be completed within 48 hours. The Assessment is what gets your resume to the managers IF you successfully pass. It is important to set time aside to complete this assessment, as once it has been opened you CANNOT STOP/CLOSE OUT the assessment. (if you do not pass, you must wait 2 months to re-apply/try the assessment again) Location: Savannah, GA Department: J0411-FP G500 Install Shift: First & Second Company DescriptionIntergen provides highly experienced aerospace engineers and technicians. Our services span a wide range of expertise, from engineering design and analysis, to manufacturing and assembly. This Includes: Mechanical Engineering Electrical Engineering, Designated Engineer Representative (DER) Avionics/AirworthinessIntergen provides highly experienced aerospace engineers and technicians. Our services span a wide range of expertise, from engineering design and analysis, to manufacturing and assembly.\r\n\r\nThis Includes: Mechanical Engineering Electrical Engineering, Designated Engineer Representative (DER) Avionics/Airworthiness

Job DescriptionDescription: Current Edge Solutions, LLC is a service-disabled veteran-owned and operated full-service firm specializing in Utility Engineering, Commercial and Industrial Electrical Engineering, Electrical Contracting Services, and Generator Sales and Service. With over 70 employees and various locations across the Southeast, the company provides the full suite of electrical services and solutions including planning, designing, engineering, consulting, generator sales and electrical construction services. Current Edge Solutions delivers projects of the highest caliber facilitated by a team with proven experience and a trusted network of utility and electrical contracting resources. We are always seeking talented, motivated individuals to join our team! If you have experience or interest in electrical and industrial engineering, project management, or related fields, we encourage you to apply. Whether you’re a recent graduate, a seasoned professional, or someone looking for a career shift, we want to hear from you. Requirements: • Bachelor's degree (or equivalent experience) in Electrical Engineering, Industrial Engineering, Mechanical Engineering, or a related field., • Strong problem-solving and communication skills, • Knowledge of industry software, • 401(k) + Matching, • Dental Insurance, • Health Insurance, • Life Insurance, • Vision insurance, • Paid Time Off Successful completion of pre-employment background check, drug screening and motor vehicle record screenings. Must be eligible to work in the U.S. without current or future sponsorship. Only candidates selected for an interview will be contacted.

Job Description (2nd shift-3pm-1:30am) High School Diploma or GED required. Entry level position. Experience in automated machine environment preferred. Position Purpose: Set up and operate automated machines to fabricate parts, applying knowledge of shop theory and procedures, shop mathematics, maintainability materials and layout techniques. Principle Duties and Responsibilities: Essential Functions: 1. Under supervision, operate automated machine using existing programs. 2. Remove/replace cutting tools and offsets as required. Inspect condition of tools and replace as needed. 3. Inspect cut material/part prior to CNC operation to ensure conformity and compliance with blueprints, models, and/or engineering documents., 3. Identify material and appropriate cutting tools. Set up material and inspect for serviceability. Additional Functions: 1. Monitor material supply., 2. Validate preventative maintenance and minor repairs on machines. Alert maintenance of any repair/preventative issues., 3. Maintain a clean and safe work environment, 4. Comply with 5S and Environmental, Health and Safety requirements. Perform other duties as assigned. Other Requirements: This Includes: Mechanical Engineering Electrical Engineering, Designated Engineer Representative (DER) Avionics/AirworthinessIntergen provides highly experienced aerospace engineers and technicians. Our services span a wide range of expertise, from engineering design and analysis, to manufacturing and assembly.\r\n\r\nThis Includes: Mechanical Engineering Electrical Engineering, Designated Engineer Representative (DER) Avionics/Airworthiness

Job Description The Field Engineer will exhibit genuine interest in solving work problems through proactively asking questions, clearly communicating and collaborating both internally and externally to grow the business. In addition, the Field Engineer is responsible for understanding our competition and customers, and showing initiative to learn and continuously improve company processes. Install, troubleshoot, operate and configure company products and systems at customer sites. Instructs customer in product usage. DUTIES & RESPONSIBILITIES • Pre-commissioning activities including system checkout, instrumentation calibration, loop checks, and communication testing., • Clear understanding of control valve and flow measuring devices functioning. Exhibit moderate understanding on sizing., • Test and tune including machinery testing, control loop tuning and troubleshooting, • Remote technical support, systems engineering support and troubleshooting, • Prepare administrative (expenses, reports, etc.) and aftermarket support, • Exhibit moderate understanding of various plant processes., • Customer training, • Collaborate with departments cross functionally to support the entire Lifecycle of our products and customer experience., • Respond to change productively and handle other duties as required., • Follow all company safety policies and procedures. EDUCATION, SKILLS & EXPERIENCE • Bachelor’s Degree in Engineering from a four-year college or university., • 5-10 years of previous work experience with turbo machinery control systems (Compressors, Steam / Gas Turbines, Expanders, Generators) and Process control. Prior experience in Power Generation applications is a plus., • Understand basic electrical principles., • Proficiency in computers and networking. PC and PLC Programming skills are a plus., • Ability to apply advanced mathematical concepts and operations to effectively complete specific projects and tasks, • Basic training skills preferred, • Experience with safety systems and / or TUV certified is a plus., • Ability to read, speak, and write fluently in English., • Certified to work offshore or willing and capable to complete the required training. Should have no issues in obtaining visas and site entry to oil sites of ME. WORKING CONDITIONS While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate to loud. Extensive domestic and international travel is required. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit; use hands to manipulate computer input devices, finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is occasionally required to stand and walk. The employee must have sufficient mobility to enable travel to industrial sites, offices, and facilities. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus.

Job DescriptionLaunch Your Career at Full Throttle: PDS Tech Commercial needs CNC Techs for Aerospace Impact With A Leading Aviation Company! Location: Savannah, GA | Pay Rate: 25.66/hour | Schedule: Full-Time, 2nd Shift (3pm - 1:30am) Drive Precision. Build the Future. Join the mission at PDS Tech Commercial, where innovation meets craftsmanship. As a CNC Technician, you'll be instrumental in fabricating critical aerospace components that ensure safety, performance, and excellence in flight. Your work will directly contribute to shaping the future of aviation. What You'll Do In this hands-on role, you'll set up and operate advanced CNC machines, working with cutting-edge equipment to produce high-precision parts. Every day offers the opportunity to apply technical skill, solve problems, and ensure the highest quality standards. Daily Responsibilities • Operate automated CNC machines using existing programs, • Set up machines and test programs according to technical drawings, • Inspect tools and materials; replace and adjust cutting tools and offsets as needed, • Modify programs to ensure accurate material fit and part conformity, • Inspect materials before and after operations for compliance with specifications, • Identify correct cutting tools and prepare material for machining, • Perform preventative maintenance and basic machine repairs, • Monitor material supply levels and complete all required documentation, • Keep work area clean and compliant with 5S and Environmental, Health & Safety standards, • High School Diploma or GED, • 2 years of related experience or education, • Minimum of 1 year of experience operating automated machineryPreferred Qualifications, • Experience in aerospace manufacturing environments, • Understanding of CNC programming basics, • Ability to read and interpret engineering drawings and blueprints, • Opportunities for advancement and continued learning, • A collaborative, safety-first work environment Pay Details: 25.66 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

MINIMUM EDUCATION * High School Diploma or GED required with minimum skill requirements. MINIMUM EXPERIENCE * Demonstrated basic mechanical aptitude through background or hobbies in agriculture, automotive or other technical areas * In lieu of demonstrated mechanical aptitude, two (2) years of FedEx Operations Sortation equipment knowledge will be considered or currently enrolled in a certificate or degree program for Industrial Maintenance, Mechatronics or related discipline * Related military technical experience and electrical or mechanical trade experience will be considered KNOWLEDGE, SKILLS AND ABILITIES * Possess basic mechanical aptitude * Basic electrical and mechanical skills preferred * Ability to solve basic mechanical or electrical problems, which may include understanding of basic engineering formulas * Ability to diagnose simple mechanical power transmission issues visually or audibly apparent at the single component level * Effective verbal and written communication within own department to peers, managers, and outside vendors to convey basic technical data and needs * Ability to follow detailed instructions * Software skills, including Microsoft Office suite and other web-based applications * Possess time management and organizational skills JOB CONDITIONS * Will need to use hand tools and possibly power tools * May be working in hot or cold temperatures * May need to stand, walk, bend, stoop and squat Preferred Qualifications: Pay Transparency: Pay: Additional Details: Federal Express Corporation is an Equal Opportunity Employer including, Vets/Disability. Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact ___. Applicants have rights under Federal Employment Laws: E-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services’ E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: • E-Verify Notice (___)

Minimum Education Eight (8) years (or 6 years with preferred degree) of progressive light industrial maintenance experience (including maintenance support) with: • Advanced in-depth understanding of mechanical power transmission and/or fabrication with basic commercial/industrial electrical experience. OR, • Advanced in-depth commercial/industrial electrical experience with basic mechanical power transmission and/or fabrication experience. OR, • Advanced in-depth production or process machinery experience with basic mechanical and/or commercial/industrial experience. AND, • Software skills, including use of Microsoft Office software and web-based applications., • Ability to follow detailed instruction to complete routine procedures and operate standard equipment., • In depth knowledge of mechanical design, layout, fabrication and repair practices as they apply to power transmission and conveyor belt applications., • In depth knowledge of motors and motor control methods., • Basic skills in electrical and mechanical troubleshooting techniques., • Basic understanding of PLC (Programmable Logic Controller), • Basic understanding of the scanner system., • Knowledge of skill and time required for each asset for scheduling the preventative and corrective maintenance., • Verbal and written communication skills necessary to communicate with all levels of management., • Time management, organizational and multi-tasking skills necessary to work in a fast-paced environment, handling various tasks and changing priorities, while maintaining a high attention to detail and accuracy to achieve daily assignments and goals., • Ability to anticipate and identify problems and use sound judgment and fact-based analysis to develop effective and efficient solutions., • Ability to mentor, coach and act as a knowledge resource to other employees., • Ability to read and create electrical and mechanical schematic diagrams., • General business skills such as typing, data entry, document review, phone, copier, fax., • Software skills, including use of Microsoft Office software and web-based applications., • Some travel may be required. Preferred Qualifications: Pay Transparency: Min pay rate $27.27 to Max pay rate $42.34 per hour Pay: Additional Details: Federal Express Corporation is an Equal Opportunity Employer including, Vets/Disability. Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact ___. Applicants have rights under Federal Employment Laws: E-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services’ E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: • E-Verify Notice (___)

Job Description Unique Skills: In this job you will work with a world class team of technicians in fabricating and final assembly of our final phase chairs and divans to support aircraft build and delivery. In this role under minimum supervision, you will work with fabric, vinyl and leather hides, composites and other materials using specified adhesives, sewing equipment, hardware, hand tools and various power tools, do foam fabrication, cover panels, make patterns, sew leather and fabric and assemble seats for customer aircraft. Previous experience in fabrication is highly desired. Education and Experience Requirements High School Diploma or GED required. entry level to 2 years experience using commercial sewing machines, sergers and/or various hand tools used in upholstery and carpet trades. preferred. Experience in aerospace industry. Position Purpose: Under minimal supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications. Job Description Principle Duties and Responsibilities: Essential Functions: • Fabricate, using design/engineering drawings and aircraft specifications, cover and install flat panels and curtains. May sew simple covers using design/engineering drawings and aircraft specifications., • Work with fabric, vinyl and leather hides, composites and other materials using specified adhesives, sewing equipment, hardware, hand tools and various power tools., • Cut and surge carpets, cover bulkheads and cover/install panels. May be responsible to fabricate various metal parts, fit panels and windows, cabin head liners, upper sidewalls, lower side panels, hatch panels, and windows., • Use the material tracking system to create parts demand, track squawks and to sign-off work. Additional Functions: • Work with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Manufacturing and other process improvement techniques. ., • Use the material tracking system, Corridor, to create parts demands, track squawks and to sign-off work. ., • Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. . Other Requirements: • Ability to read, write, speak, and understand proficiently the English language., • Ability to read and interpret blueprints and engineering documentation., • Ability to use measuring tools and perform basic math computations., • Must be computer literate., • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift., • Must be able to read, write, speak, and understand the English language. #: 210913 Department: J0772-Upholstery Shift: First & Second Once submitted, Gulfstream will send a Talogy Assessment to your email that must be completed within 48 hours. The Assessment is what gets your resume to the managers IF you successfully pass. It is important to set time aside to complete this assessment, as once it has been opened you CANNOT STOP/CLOSE OUT the assessment. (if you do not pass, you must wait 2 months to re-apply/try the assessment again) (Also have the Dallas, TX location available) (will become a direct employee after 6-18 months) Company DescriptionIntergen provides highly experienced aerospace engineers and technicians. Our services span a wide range of expertise, from engineering design and analysis, to manufacturing and assembly. This Includes: Mechanical Engineering Electrical Engineering, Designated Engineer Representative (DER) Avionics/AirworthinessIntergen provides highly experienced aerospace engineers and technicians. Our services span a wide range of expertise, from engineering design and analysis, to manufacturing and assembly.\r\n\r\nThis Includes: Mechanical Engineering Electrical Engineering, Designated Engineer Representative (DER) Avionics/Airworthiness

From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. The candidate will need to have a general understa

Track and communicate key projected milestones to relevant internal departments and relevant external stakeholders (including city officials, engineering/utility consultants, utility companies, contractors, etc.

Adheres to local, state, and federal survey regulations as well as Accura Engineering procedures. Bachelor's Degree in Land Surveying, Civil Engineering, or related field from an accredited program or a scientific area and/or equivalent work experience preferred.

We are currently seeking an experienced.Fire Alarm / Sprinkler Project Manager.The ideal candidate will have strong project management experience within the fire protection industry and, preferably, NICET certification.Manage fire alarm and sprinkler projects from planning through completion.Coordin

We are a growing civil engineering, planning, landscape architecture, and land surveying firm based in Savannah, GA.

Knowledge of installation, maintenance, and repair of mechanical electronic locking systems.

Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulleti

Industrial Maintenance Electrician/Technician.Industrial Maintenance Electrician/Technician.Competitive, based on experience.Health insurance, 401(k), paid time off, and more.We are looking for a skilled Industrial Maintenance Electrician/Technician to join our dynamic team in Savannah, GA.If you ar

Join our team as an Equipment Maintenance Technician, where your skills will shine in delivering exceptional customer service while ensuring our equipment operates smoothly.Providing friendly and effective assistance to customers.Resolving equipment issues promptly to enhance customer satisfaction.C

Jorgensen) is a world leader in maintenance management.For over 50 years Jorgensen has provided a diverse range of facility and highway infrastructure, consulting, maintenance and management services.Our professionals are in the forefront as facility managers, maintenance engineers, trainers, assets

We are currently seeking an experienced.Fire Alarm / Sprinkler Project Manager.The ideal candidate will have strong project management experience within the fire protection industry and, preferably, NICET certification.Manage fire alarm and sprinkler projects from planning through completion.Coordin

Essential Staffing Solutions is looking for dependable, hard-working, and self-motivated HVAC Certified Maintenance Technician professionals.Our Certified Maintenance Technician is primarily responsible for the repair and general maintenance of apartment AC units and other property facilities such a

HVAC - Service Technician - Maintenance.Step into an environment built on transparency and collaboration, with a hands-on management team that supports and challenges you to grow.You'll have access to the tools, regular training, and resources you need to excel.We offer clear paths for advancement,

The Civil Engineering PM will be responsible for the following:. Recommend efficiencies in the production process to Director of Civil Engineering. Bachelors degree in Engineering (required).

DCS is a family owned and operated business with treating all employees like family at the core of our values.Our employees provide innovative, safe, and high-quality infrastructure/maintenance contracting services to State DOTs, railroads, and other commercial/residential customers across the entir