Osha jobs in Oklahoma City, Oklahoma - Page 2Crear alertas

Job DescriptionSalary: 19.50 DENTAL ASSISTANT: The Dental Assistant will understand and model the mission of NSO. The DA will understand and practice NSOs policy on confidentiality in respect to all NSO information. The DA will exhibit professional behavior in all facets of work at NSO. The DA will exhibit teamwork with all NSO staff. The DA will work with the dentist and other team members to increase the efficiency of the dentist in the delivery of quality oral health care by performing tasks that require both interpersonal and technical skills. ESSENTIAL FUNCTIONS • Assisting the dentist during a variety of treatment procedures, • Taking digital x-rays with the use of snap-a-ray sensor holders, • Review patient medical history, • Take blood pressure and pulse, • Work closely with the infection control officer to maintain infection control protocol, • Preparing and sterilizing instruments and dental equipment, • Ensure patients feel comfortable before, during and after dental treatment, • Ensure patient received written instructions for care following dental surgery or other dental treatment procedures, • Apply topical drugs prescribed by a dentist, • Take impressions or a digital scan of patients teeth for study casts, • Communicating with the dentist and patient to schedule follow up appointments, • Place or remove celluloid, plastic or metallic strips between teeth for subsequence placement or filling by the dentist, • Place or remove rubber dam under supervision of a dentist, • Provide suction/evacuation function, • Assist with maintaining patient charts, clinic progress notes, and NSO clinic records, • Other assigned duties MINIMUM JOB REQUIREMENTS Must effectively communicate in English orally and in writing. Must possess a valid dental assisting permit from the Oklahoma Board of Dentistry Must have X-ray certification Nitrous certification preferred Coronal polishing and Fluoride application certification preferred Sealant application certification preferred Must possess a valid Healthcare Provider CPR certification. Experience working with the homeless and underserved population preferred. Clearance of background check and drug screen. This is a Safety Sensitive Position and therefore is not subject to the protections of the Oklahoma Medical Marijuana and Patient Protection Act. SKILLS AND ABILITIES REQUIRED • Thorough knowledge of dental office and chair-side dental assisting practices, procedures and techniques., • Considerable knowledge of dental terminology and charting practices., • Considerable knowledge of the principles and practices of dental health promotion and prevention., • Some knowledge of Federal and OSHA regulations for dental clinics., • Intermediate computer skills with knowledge of Eaglesoft software and digital x-rays preferred, • Knowledge of digital scanning of teeth using iTero preferred, • Requires ability to work independently as well as with a team, • Ability to respect and maintain confidentiality., • Ability to be culturally sensitive to the needs of the medically indigent., • Ability to respond to new client needs., • Ability to work effectively in a dynamic clinic environment and to handle multiple demands and responsibilities. WORKING CONDITIONS • The work requires lifting of supply boxes in the medium range (up to 30 lbs.), • Majority of time spent in this position is in a well-lighted, heated and/or air-conditioned indoor office setting with adequate ventilation, • Work very near other people and have little space between self and others, • May risk exposure to radiation, • May risk exposure to biohazards and communicable diseases, • May be placed in conflict situations in which others may be rude or unpleasant, • Work is performed walking or standing much of the time, • Occasional periods of high stress

Job DescriptionSalary: Job Title: Surgery Technician Location: ClearSight Center, Oklahoma City, OK Job Description: The Surgery Technician supports the surgical team by performing technical duties to ensure a welcoming, professional, and efficient surgical environment. This role demonstrates expertise in surgical technical skills, communication, time management, and patient care while assisting surgeons and supporting high-quality outcomes. Key Responsibilities: Supports: • Prepares surgical rooms, ensures sterile fields, sets up instruments and equipment, and assists surgeons during procedures., • Provides pre-operative and post-operative support to patients with professionalism and care., • Maintains, cleans, and sterilizes instruments and equipment according to standards and protocols., • Reviews charts, confirms clearances, and calculates treatments for each surgery patient to support surgical flow., • Follows all surgical policies, procedures, and protocols to ensure patient safety and regulatory compliance., • Assists in time-sensitive or emergent situations with a calm, level-headed demeanor., • Demonstrates availability, punctuality, and flexibility, filling various roles as needed within surgical operations., • Remains current on relevant surgical practices, policies, and organizational standards., • Travel to other locations for training or meetings as required., • Adhere to the company's core values and serve a culture of service., • Take charge of surgical support tasks and responsibilities with a calm and composed demeanor., • Delegate or prioritize tasks effectively to meet workflow needs., • Promote and participate in ongoing education and training., • Communicate effectively with all team members, surgeons, and providers., • Ability to work and excel in a dynamic, fast-paced surgical environment., • Commit to participating in strategic initiatives and special projects as needed., • Complete relevant department certifications within designated timeframe., • Complete and comply with all OSHA and HIPPA certifications., • Complete and maintain CPR certification., • Education: High school diploma or equivalent required; surgical tech certification preferred., • Experience: Prior experience as a surgical tech required., • Strong knowledge of surgical operations and technical procedures., • Excellent communication and interpersonal skills., • Proficiency with EMR systems and daily chart management., • Strong computer and organizational skills including intermediate knowledge of Word, Excel, PowerPoint and Google Drive or similar cloud-based file management systems., • Calm demeanor in emergent situations., • Values Alignment: Demonstrated commitment to core values Be Precise, Honor Each Person, Reach for Remarkable, and Stay Humble. Non-exempt / Hourly Position Reports to: Surgery Team Supervisor (OKC)

Job DescriptionDescription: • Oversee inventory and distribution of equipment and supplies., • Responsible for controlling the inventory, reordering supplies, and checking expiration dates., • Inspect, disassemble, sort, clean, and process reusable instrumentation and equipment., • Diagnose problems, replaces or repairs parts, make process adjustments., • Maintain current training status on all applicable standard operating procedures., • Create processes and tools for mobile use of GIS for data collection and consumption., • Responsible for cleanliness of department and all processing equipment., • Unload supplies, ensuring items are not compromised and stored in correct location according to tracking system storage locations., • Support implementation of new technology for process execution and/or analysis., • Ability to maintain composure and professionalism when exposed to stressful situations, • Knowledge of OSHA and state regulations, • Knowledge of the English language – composition, grammar, spelling, and punctuation, • Skilled in the use of standard office equipment including telephones, calculators, copiers, fax, computers, and computer software (MS Excel, Word, Practice Management software), • Ability to instill trust from the doctors, co-workers, and patients, • Ability to work cooperatively with management, staff, and patients, • Ability to prioritize, organize, and complete tasks in a timely and independent manner, • Ability to understand and follow written and verbal instructions and accept constructive criticism, • Ability to collect data, establish facts, draw valid conclusions, and maintain confidentiality, • Ability to communicate and express thoughts and ideas competently, • Ability to quickly grasp relevant concepts regarding duties and responsibilities, • Other duties as assignedRequirements:, • High school diploma or equivalent

Job Description About Us Fence OKC and Security Constructors are leaders in high-security fencing, gate automation, and access control solutions for commercial, industrial, and government clients. We also complete residential projects with the same high standards. We are committed to quality, safety, and professionalism in every job we do. Position Summary The Crew Leader is responsible for overseeing a fence installation crew to ensure projects are completed safely, on time, and to company quality standards. This role requires hands-on leadership, construction expertise, and the ability to train, motivate, and hold team members accountable. The Crew Leader is the key link between field operations and project management, ensuring that jobsite activities align with plans, specifications, and company expectations. Key Responsibilities Project Leadership • Lead and supervise a crew of installers on commercial, industrial, and residential fencing projects., • Interpret project plans, specifications, and work orders to direct daily tasks., • Coordinate with Project Managers and Warehouse staff for material needs and scheduling., • Ensure all work meets Fence OKC quality standards and client specifications., • Enforce OSHA safety protocols, PPE requirements, and company safety policies., • Conduct daily Job Hazard Analyses (JHAs) and safety toolbox talks., • Participate in all phases of fence installation, including layout, digging, setting posts, stretching wire, and gate installation., • Operate equipment such as skid steers, post drivers, and power tools., • Provide direction, training, and mentoring to crew members., • Monitor performance and give constructive feedback., • Promote teamwork, accountability, and a positive work environment. Qualifications • 3+ years of experience in fence installation or related construction trade., • 1+ years of leadership or supervisory experience preferred., • Ability to read blueprints, site plans, and material lists., • Proficient in the safe use of construction tools and equipment., • OSHA 10 or 30 preferred., • Valid driver’s license with a clean driving record (CDL a plus)., • Ability to work outdoors year-round in varying weather conditions. Physical Requirements • Lift up to 80 lbs. regularly., • Stand, kneel, bend, and work in physically demanding environments for extended periods., • Operate machinery and tools safely. Compensation & Benefits • Competitive hourly rate + overtime pay., • Health, dental, and vision insurance., • PTO and paid holidays., • Company-provided PPE and tools., • Opportunities for advancement into Project Manager or Superintendent roles.

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Profit sharing, • Training & development Avik Services LLC partners with leading e-commerce and logistics companies to deliver full-service warehouse technology, including robotics and automation systems. We are seeking an Installation Lead / Millright to join our dynamic, fast-paced team. In this hands-on role, you will lead small teams in the installation and deployment of advanced communication and warehouse technologies. You will travel extensively throughout North America to customer distribution sites, with all work-related travel expenses reimbursed. There is room to grow and excel in this fast-paced organization. Key Responsibilities & Required Qualifications The candidate should be a self-starter that can handle multiple tasks simultaneously and show the ability to continually advance your knowledge to drive process improvement for future installations. The candidate should have the ability to quickly read and absorb installation documentation to accurately repeat tasks, in addition to leading others. The candidate should be comfortable communicating within their own team and directly with clients. This is a field-based role with significant travel, full benefits and opportunities to advance. • Background in construction, warehousing, or equipment installation., • Experienced in measuring and using hand and power tools to install mechanical systems and components., • Adept at reading and interpreting installation documentation., • Work independently to complete repeated installation tasks with accuracy., • Lead 34 person teams during on-site hardware installations., • Travel extensively (up to two weeks at a time) to client warehouse/distribution sites., • Ability to work in warehouse environments, lifting and carrying materials of up to 50 lbs., • Ability to ravel extensively - 80-100% with options to travel home every 2 weeks., • Ability to book travel using Concur and submit expense reports in a timely manner., • Pass a background check with no felony convictions (last 7 years)., • Valid drivers licensePreferred Qualifications, • Basic computer skills, including familiarity with Microsoft Office Suite, • Forklift, Aerial lift and OSHA certifications a plus

Job Description Taylor Dental & Implant Center is seeking an amazing full-time General Dentist for our practice in Oklahoma City! We are seeking a compassionate and skilled General Dentist to join our beautiful, modern dental practice. With a strong, established patient base and a highly-trained, tenured support team, you’ll step into a full schedule and the opportunity to deliver a broad range of dental services. The ideal candidate is a collaborative team player with excellent chairside manner, committed to providing high-quality care in a professional and welcoming environment. What You’ll Love About This Practice: * State-of-the-art, contemporary facility * Full schedule with a loyal and diverse patient base * Streamlined systems and highly efficient support staff * Emphasis on high-quality, patient-centered care * Reputation for trust and excellence in the local community What We Offer: * Competitive compensation with 401(k) * Employer-paid professional liability insurance * Employer-paid state licensure and association dues * Annual continuing education (CE) allowance * Clinical autonomy and full-scope dentistry * Supportive leadership and ongoing mentorship opportunities Key Responsibilities: * Diagnose and treat dental issues including fillings, crowns, extractions, root canals, and cosmetic procedures * Perform routine cleanings, oral cancer screenings, and preventative care * Take and interpret dental X-rays and digital imaging * Educate patients on oral hygiene and post-treatment care * Prescribe medications when necessary * Ensure safety and compliance with infection control standards (HIPAA, OSHA, CDC) * Maintain accurate patient records and treatment documentation * Take impressions for crowns, bridges, dentures, and mouthguards Qualifications: * DDS or DMD degree from an accredited dental school * State dental license (or eligibility for licensure) * CPR certification * 5 + years of clinical experience preferred * Proficient in dental software and digital imaging platforms * Strong communication and teamwork skills

Job Description ACADEMIC AFFAIRS ANNOUNCES AN OPENING IN THE HEALTH SCIENCES DIVISION POSITION: Simulation and Lab Coordinator, 50%/Professor, 50% Description of Duties: Responsible for monitoring and maintenance of lab inventory, supervise simulations, and oversee the development and delivery of all program simulations. Regular attendance is an essential function of this position. Collaborate with Program Director to establish, review, and research policies, standard practices, and procedures related to the skills and simulation lab with a focus on continuous quality improvement. Research, develop, update, collaborate, and refine lab and clinical scenarios for the nursing programs based on student and faculty needs which are reflective of current practice standards. Collaborate with course faculty in planning, designing, organizing, and delivering lab and simulation activities to meet the needs and schedule of the course. Ensure safety and maintain OSHA standards within the simulation lab to include appropriate disposal of hazardous waste and sharps. Keep current with safety standards and inform the Nursing Program Director and faculty of changes in standards. Monitor inventory and order necessary supplies for the skills and simulation lab, including performing the annual supply inventory. Ensure maintenance of simulation manikins and other equipment in the skills and simulation lab; initiate repair requests and maintain appropriate warranties. Provide orientation to instructors regarding the policies, procedures and use of the simulation lab. Collaborate with the Program Director and faculty to coordinate the complementary blending of lab practice, simulation, virtual simulation and the clinical experience. Assist students and faculty in meeting course objectives through the utilization of the skills and simulation lab activities. Oversee utilization of the skills and simulation lab and equipment. Serve as a resource and support for Health Programs faculty in utilizing the simulation lab. Collaborate with Nursing faculty to provide student remediation in the lab setting. Utilize and emphasize instructional methods that promote the development of critical thinking, problem solving, decision-making, and clinical competency for real life application. Conduct tours for internal/external stakeholders. Create a student-centered environment for on and off campus students. Implement innovative strategies to meet the needs of students and improve processes. Promote and support RSC’s mission, vision and values and promote and support coworkers in the most positive manner. Work cooperatively with faculty, staff, students, and our learning community. Interact with co-workers and perform tasks with the highest level of integrity. Minimum Qualifications: Bachelor’s degree in nursing from a regionally accredited institution of higher learning. Three (3) years or the equivalent of full-time clinical experience as a registered nurse. Have current knowledge of nursing practice for the registered nurse. Certification in Human Simulation Experience (HSE) within one (1) year of date of hire. Light carrying up to 10 lbs and light lifting up to 10 lbs required. Ability to reach above shoulder. Periods of time spent sitting, standing, walking, kneeling, bending, and stooping. Desired Qualifications: Master’s in nursing education with emphasis in nursing education. Community college teaching experience. Nursing simulation creation and management experience. Application Deadline: Until Filled Please submit application materials as requested. The original signed Rose State College application form and unofficial degree conferring transcripts must be received by this office for formal consideration; however, should an offer of employment be extended, official transcripts are required. Candidate selected will serve a probationary period. All finalists may be subject to a background check and/or drug test. (POSTED ON August 18, 2025) Must be eligible to work in the United States Rose State College's Annual Security Report, including VAWA disclosures, is located at An Equal Opportunity Employer In accordance with the Americans with Disabilities Act, reasonable accommodations in the application process will be provided upon written request. EMPLOYEE RELATIONS (405) 733-7979 6420 SE 15th STREET ~ MIDWEST CITY, OK ~ 73110-2799 Powered by ExactHire:181666

Job DescriptionJob Title: Fiber Splicing Technician – Ribbon Splicing Location: (Travel Required) Position Overview: We are seeking experienced and detail-oriented Fiber Splicing Technicians with proven ribbon splicing experience to join our growing team. This position plays a critical role in supporting large-scale data center and fiber infrastructure projects across multiple states. We are looking for technicians who take pride in delivering precise, high-quality splicing work and are ready to travel as needed for ongoing nationwide projects. All travel expenses, housing, and per diem will be provided. Key Responsibilities: * Perform fusion splicing and ribbon splicing for high-count fiber optic cables (including up to 3456-count). * Operate fusion splicing equipment and related fiber optic tools efficiently and safely. * Conduct fiber testing, troubleshooting, and validation using OTDR, power meters, and inspection scopes. * Maintain accurate documentation and labeling, ensuring all splices meet project specifications and quality standards. * Follow all safety protocols, OSHA regulations, and company procedures on every site. * Collaborate closely with team members and project leads to ensure on-time and high-quality delivery. Qualifications: * Proven hands-on experience in ribbon splicing (required). * Strong understanding of fusion splicing techniques, fiber optic testing, and quality control processes. * Ability to read and interpret fiber maps, splicing diagrams, and work orders. * Excellent attention to detail and a strong commitment to precision and reliability. * Must be dependable, punctual, and able to work in outdoor or data center environments. Preferred Experience: * Multiple years of experience splicing high-count ribbon fiber cables (1728, 3456, etc.). * Experience working on data centers, backbone fiber builds, or large-scale telecom infrastructure. * Familiarity with documentation standards and QA/QC workflows. * Comfortable working on travel-based projects with fast-paced schedules. Compensation & Benefits: * Competitive pay based on experience and performance. * Project-based work with opportunity for continuous assignments. * Housing and per diem provided for all travel projects. * All travel expenses covered. Important Requirement: All candidates must pass a technical assessment on ribbon splicing before placement. Only candidates with verified, hands-on experience will be considered. How to Apply: If you have proven ribbon splicing experience and are ready to travel, we’d love to hear from you! Powered by JazzHR 1XcauGrSOo

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact Wind Turbine Traveling Technicians (Composite Repair) specialize in conducting inspection and corrective repair of composite Wind Turbine Generator (WTG) components, utilizing established procedures, with the highest regard for health, safety, and environmental compliance. Wind Turbine Traveling Composite Technician will be responsible for internal and external inspection and repair of blades, nacelles, and other composite components, and will carry out tasks such as sanding, cleaning, cutting and lay-up of fiberglass, carbon fiber and resin materials. As required, they may also assist in service and repair work on other wind turbine generator components, as well as related equipment and balance-of-plant. This position is 100% travel. Signing bonuses up to $6,500 available for qualified candidates with required certifications and experience. Core Responsibilities Employees in the Wind Turbine Composite Technician position should expect to: • Evaluate, inspect, diagnose and document internal and external composite damage, then photograph and assemble documentation as required., • Perform coating and structural repairs of internal and external composite structures, such as wind turbine blades and nacelles., • Modify and repair fiberglass, carbon fiber, resin and other composite materials as needed., • Work with site leadership to execute all contractual obligations and activities set forth with the customers daily, which can include composite repairs with respect to wind turbines., • Perform Lock Out Tag Out (LOTO) as required to maintain a safe working environment., • Interpret engineering drawings and lamination schedules., • Coordinate with the engineering support team when needed for non-standard repairs. Core Experience • Minimum of 3 years of experience working with composite materials in any industry., • Proven technical and team leadership skills., • Supervised composite blade damage assessment., • Lightening damage tip, carbon blade tip and multi-shell tip replacement., • Experienced with internal and external adhesive bonding., • Competent in repairing leading edge (LE) and trailing edge (TE) cracks., • Understanding of mix ratios for all composite repair chemicals., • Read and understand electrical schematic drawings., • GWO Certified (BTT, BST) preferred., • Ability and willingness to climb a wind turbine vertically at least 300 feet., • Maintain a weight between 120 and 280 pounds, including clothing and boots, for OSHA safety compliance., • Lift and move equipment as needed (more than 50 pounds). In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$45 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Job Description We are seeking an experienced and highly organized Warehouse Manager to oversee daily warehouse operations and ensure the efficient receipt, storage, and distribution of products. The ideal candidate is a hands-on leader who excels at team management, workflow optimization, and maintaining accurate inventory systems. Key Responsibilities • Oversee all warehouse operations, including receiving, picking, packing, shipping, and inventory control., • Lead, train, and supervise warehouse staff to ensure safe, efficient, and high-quality work., • Implement and maintain warehouse policies, procedures, and safety standards., • Monitor inventory levels, conduct regular cycle counts, and work closely with purchasing and logistics teams to resolve discrepancies., • Manage warehouse layout, space utilization, and equipment maintenance to optimize company workflow., • Ensure compliance with OSHA and company safety regulations., • Identify opportunities for process improvement and cost reduction. Qualifications • 3–5+ years of warehouse or logistics management experience., • Strong leadership skills with proven ability to manage and motivate teams., • Experience with warehouse management systems (WMS) and inventory software., • Solid understanding of shipping, receiving, transportation, and inventory control., • Excellent problem-solving, communication, and organizational skills., • Ability to lift 40+ lbs and work in a physical warehouse environment as needed. What We Offer • Competitive salary, • Health, dental, vision and life insurance, • Paid time off and holidays, • Opportunities for professional development and career growth

Job Description Job Description Don’t get struck by a lightning bolt; start an exciting and rewarding career in lightning protection! Bonded Lightning Protection Systems has an immediate opening for an Entry Level Installation Apprentice. This entry level role will be the beginning of your apprenticeship training to become a lightning protection field installation technician with the largest lightning protection contractor in the United States. Established in 1950, we are a second-generation, family-owned company dedicated to providing protection and peace of mind! This is the perfect opportunity to launch your career! We’ll provide you with hands-on training plus competitive compensation and great benefits. Apply Today! Job Responsibilities This apprenticeship program is designed to allow you to develop the skills and knowledge for a stable career in a construction related field. As an Entry Level Installation Apprentice you will learn nationally recognized standards governing the lightning protection industry while receiving hands on installation training in the field. Training includes • Basic training in reading blueprints and installation drawings, • Learning how to install trenched in grounding systems To qualify for this position, you must feel comfortable working on ladders, lifts, high rise and pitched roofs. You must also be willing to learn and follow mandatory safety requirements for our installation processes. • Pass a criminal background check & drug screen, • Valid Driver’s license and clear MVR, • Drug free and clear driving record at all times, • Experience in general construction (a plus but not required), • Experience in operating machinery (mini excavator, forklift, etc.) (a plus but not required), • Some travel (we try to keep team members home as much as possible), • OSHA 10 of 30 (a plus but not required), • Ability to complete all company safety programs, • Ability to read and write English, • 401(k), • Employee discount, • Paid health and life insurance, • Paid time off, • Referral program, • Safety training and certifications, • Membership in Local IBEW Electrical Union after 90 days, • Paid Union Dues, • 40-hour guarantee pay, • In Person

Job Description Are you a highly skilled generator service technician or generator diesel mechanic looking for a career with a long-standing, growing company? Are you equally skilled in mechanical and electrical installation and troubleshooting and great at customer service? If so, we should talk. We are Power Plus! A multi-industry leader in providing power when you need it, where you need it through intelligent and efficient power solutions. We work with Fortune 500 companies across the country such as Amazon, Wal-Mart, Costco, and more. We’ve built a 35-year reputation for excellence through our commitment to developing our people, providing exceptional, relationship-based customer service, and giving back to the community. Our biggest differentiator is the quality of our people, and the working environment we create for them, which really has to be seen to be believed. Our Generator Service & Maintenance Division is seeking qualified Generator Service Technicians to maintain, troubleshoot, diagnose, repair, and test generators ranging from 5 kw to 4000kw while providing best in class service to customers! Benefits for Generator Service Technicians: • Medical, • Dental, • Vision, • Training and mentoring, • Employee Assistance Program, • 401(k) with matching, • Paid sick leave, • Paid vacation, • Competitive salary with overtime and on-call pay available, • Inspect, maintain, troubleshoot, diagnose, repair and test 5kw – 4000kw generator systems, • Interact with customers, • Correctly fill out paperwork, • Mechanical and electrical aptitude, with experience in mechanical and electrical fields, particularly with diesel generators., • Technical schooling, automotive or transportation fields, commercial, residential electric and or like military experience a plus, • Willingness to learn and use new technologies., • Available to work various shifts, weekend, holidays and on-call pager rotations with occasional out of town travel/overnight stays., • Able to safely operate heavy equipment, forklifts, and mobile cranes accordance to OSHA regulations. If you’ve always wanted to really make a difference, have your contributions mean something, and work for a place where loyalty, integrity, and hard work still means something, we want to hear from you! Powered by JazzHR TRiA5CJ8tk

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you’ll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines — ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: • Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines., • Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards., • Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production., • Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology., • Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed., • Ensuring adherence to safety protocols and industry standards. What We Offer: • Stable, long term employment with career growth in a rapidly expanding, innovative Company, • Competitive hourly rate: $22.50 – $30.00 per hour (based on experience), • $60 a day meal per diem, • Paid travel and lodging for Projects nationwide, • Work with a Global Team pioneering the future of wind turbine technology What We’re Looking For: • Strong mechanical and electrical troubleshooting skills, • Ability to travel frequently and work in Field conditions The minimum requirements to be considered for this role include: • Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time., • A Valid Drivers License, • Basic Computer skills, • Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: • GWO Basic Safety Training (BST), • GWO Advanced Rescue Training (ART) Full, • GWO Basic Technical Training (BTT), • OSHA 10, • NFPA 70E, • Electrical safety awareness, • First Aid, • GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO We believe great work starts with feeling valued and supported. That’s why we are building an thoughtful, competitive benefits and perks to help you thrive — professionally and personally — through every step of your Career with us. You will be eligible for: Health Insurance • Medical (80% Employer contribution), • Dental Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

EHS Manager – Senior Level – Automotive Must have manufacturing experience to be considered Are you passionate about creating a safe and sustainable work environment? Do you have the expertise to lead and inspire a team towards achieving excellence in health, safety, environmental, and security functions? If so, this growing industrial company has an exciting opportunity for you! We believe in the power of teamwork and innovation. If you’re ready to lead a team, drive excellence, and make a significant impact, we want to hear from you! Salary Up to $130,000 + Bonus + Benefits Why You Should Apply: • Leadership Role: As the EHS Manager, you will be at the forefront of ensuring an accident-free workplace and managing critical HSE elements. Driving the EHS Culture within every department., • Strategic Impact: Develop and implement strategic plans that exceed plant and corporate expectations, drive change, and eliminate obstacles to excellent HSE performance. Developing and implementing safety systems and procedures., • Collaborative Environment: Work closely with senior management, department heads, and your team to achieve outstanding results in health, safety, environmental, and security functions., • Professional Growth: Enhance your skills and knowledge through continuous learning and development opportunities. Key Responsibilities: • Lead and direct the HESS functions, • Achieve and maintain all ISO certifications and ensure compliance with HSE regulations, • Develop strategic plans for HSE initiatives and facilitate change, • Coach and communicate HSE strategies to the team, ensuring everyone understands and complies with requirements, • Maintain accurate injury-illness records and ensure documentation meets corporate and OSHA guidelines. Minimum Qualifications: • Education: Bachelor’s degree in an EHS-related field preferred, • Experience: Minimum of 10 years of EHS / HESS related experience manufacturing. Not considering service industry experience., • Skills: Excellent organizational, planning, and communication skills. Ability to build and sustain good working relationships and work effectively in a team environment.

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking highly motivated Drone Pilots (UAS Pilots) for our Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician or Wind Turbine Robotics Operator. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the Wind Energy Industry. In this role, you’ll have the opportunity to travel to wind farms across the Country (both Onshore and Offshore), with all Accommodation and Travel Expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on Wind Turbines — ensuring peak performance and safety standards are met. Our highly motivated Drone Pilots (UAS Pilots) collect photographic and video data for our wind turbine generator inspection and maintenance Company. Paid Drone Training will be conducted by Aerones on piloting, process, safety, and technical skills for all new hires. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role in the same disciplines as Wind Field Technicians. This training and appropriate supplies will be paid for by the Company for new hires. Job Tasks and Responsibilities: This is a mid-level career role requiring previous professional Drone Pilot experience - individuals will be PIC for photographic and video missions within Customer wind farms. • Data Custody, Data Management, and Data Upload to Company servers., • In a timely manner, communication with our Clients and internal stakeholders; Project Managers, Engineers, etc.., • Report successfully completed task, analyze applicable data and as required inform relevant departments of safety and quality risks., • Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines., • Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards., • Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production., • Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology., • Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed., • Ensuring adherence to Safety Protocols and Industry Standards. What We Offer: • Stable, long term employment with career growth in a rapidly expanding, innovative Company, • Competitive hourly rate: $27.00 – $32.00 per hour (based on experience), • Fully paid Travel and Lodging for Projects nationwide, with an additional $60 a day per diem for other Meal & Incidentals, • Work with a Global Team pioneering the future of wind turbine technology What We’re Looking For: • Strong mechanical and electrical troubleshooting skills, • Proven ability to learn new skills, • Ability to Travel Frequently and work in Field conditions The minimum requirements to be considered for this role include: • Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time., • A Valid Drivers License and a clean driving record, • FAA Part 107 Remote Pilot Certificate, • Basic Computer skills, • Willing and able to undertake a Background check and a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Highly Desired • FAA Private Pilot Certificate, • DJI Mavic 3 or similar quadcopter experience, • Prior military service, • GWO Basic Safety Training (BST), • GWO Advanced Rescue Training (ART) Full, • GWO Basic Technical Training (BTT), • OSHA 10 Certificate, • NFPA 70E, • GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO We believe great work starts with feeling valued and supported. That’s why we are building an thoughtful, competitive benefits and perks to help you thrive — professionally and personally — through every step of your Career with us. You will be eligible for: Health Insurance • Medical (80% Employer contribution), • Dental Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

Creating Life Better Here starts with you. At San Juan Regional Medical Center, we're more than a healthcare provider—we're a values-driven organization dedicated to delivering exceptional care. As a team member, you help fulfill our mission to make life better here for our community. *** 3/12 hour shifts 8:30A - 9p Rotating Schedule. $25,000 Sign on Bonus The Registered Nurse is a sincerely caring and compassionate professional and assumes accountability in utilizing the nursing process to provide dynamic patient management. Required Behaviors: • As you go about fulfilling this mission, your work habits and work relationships should embody SJRMC's values. These values are our culture, our identity as an organization: Sacred Trust, Personal Reverence, Thoughtful Anticipation, Team Accountability and Creative Vitality ask more of us than merely completing some list of tasks. Our values ask for a deeper level of commitment, and what is asked of us we freely give because we believe in our mission. Required Qualifications: • Current licensure by the State Board of Nursing of New Mexico or compact (multi-state) license, • Basic Life Support (BLS) Certification, • Must meet the requirements for obtaining and maintaining life support certifications as outlined in the Life Support Certification policy Duties and Responsibilities: • Provides individualized patient care and maintains clinical competency appropriate for the area of practice, • Understands and follows policy and procedure in addition to meeting licensure requirements, • Responsive to current safety and quality initiatives and sustains improvement, • Builds productive interpersonal relationships in every encounter, • Demonstrates teamwork, • Actively participates in the department, • Each employee is responsible for implementing SJRMC’s Service Standards into their daily work: Safety, Courtesy, Effectiveness, and Stewardship, • Other duties as assigned Physical Demands and Environmental Work Conditions: • Must be able to see with corrective eyewear and hear clearly with assistance, • Must be able to walk, stand, bend, squat, climb, kneel, and twist frequently, • Must be able to lift greater than 50 pounds and push 0-300 pounds frequently, • Potential exposure to blood and bodily fluids and meets OSHA training requirements Special Demands: • Sets limits when dealing with angry, hostile, or sometimes verbally or physically abusive patients and families in an attempt to ensure a safe, respectful environment that will support the delivery of care, • Effectively copes and strives for balance when caring for acutely ill patients and families

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Moore, OK. Most positions are first shift with a pay range of $23- $35/hour based on experience & skill level. If you are an Electrician and want to work alongside other proven Craftsmen who emphasize safety, productivity, and superior workmanship, this is your chance to advance your career! Job Scope to Include any or all of the following for Commercial and/or Residential Projects: • Running & Pulling Wire, • Running & Bending Conduit, • Terminations, • Installing Lights & Outlets, • Low Voltage Work, • Previous Electrical Experience, • Tools for the Trade, • Proper PPE must be worn, • OSHA 10 is Preferred Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs

Job Description Now Hiring: Licensed Journeyman Electrician Location: Pryor, Oklahoma Project: Long-term Commercial Data Center Talent Corps is looking for experienced Licensed Journeyman Electricians to join a high-profile Commercial Data Center Project in Pryor, Oklahoma. This is a long-term opportunity with competitive pay, consistent hours, and great benefits. What You'll Be Doing: • Install conduit, wiring, and cable tray, • Read blueprints/layouts to determine conduit paths, support locations, and clearances, • Use laser levels or chalk lines to measure and mark accurate layouts, • Install anchors and hangers, • Drill and secure ATRs or use beam clamps depending on structure type, • Valid Oklahoma Journeyman License, • 7+ years of experience in the electrical field, • OSHA 10 or 30 (completed within the last 3 years), • Reliable transportation, • Must be eligible to work in the U.S., • Willing to submit to a background check, • Weekly pay via direct deposit, • Per diem available, • Competitive pay based on experience, • Health benefits: Medical, Dental, Vision, • Opportunity to work with a trusted, well-established company Send your resume to: Text us at: (972) 645-0477 for immediate consideration

Job DescriptionWork Location: Jacksonville, FL (Traveling) Job Responsibilities • Provide onsite supervision and be responsible for the proper coordination and timeliness of the work and for the proper workmanship of all trades., • Provide safety oversight to ensure compliance with OSHA and EM 385-1-1 regulations., • Responsible for keeping a clean and safe working environment., • Schedule and coordinate all subcontractors and material suppliers., • Attend all pre- construction site visits, pre-final inspections, and final inspections., • Communicate and direct the efforts of those performing the work., • Conduct weekly or bi-weekly QC / Progress meetings., • 5+ years’ experience performing as a project manager/superintendent for a general contracting firm overseeing multi-discipline commercial and industrial construction projects with a premium being placed on managing government construction projects., • Strong leadership abilities and interpersonal skills; excellent verbal and written communication., • Proficient ability to Read / Interpret blueprints and project specifications., • Computer literacy (Excel, Word, PowerPoint, MS Project, Bluebeam, etc.)., • Ability to create project schedules, pre-construction, and product submittals are a plus as well. (Knowledge of MS Project, Primavera P6, Smartsheet)., • OSHA 30-hour training with Five (5) years of continuous construction industry safety experience in supervising/ managing general construction (i.e., managing safety programs or processes, or conducting hazard analyses and developing controls), • First Aid/CPR., • USACE QCM for Contractors, • NAVFAC ECATTS, • EM 385 40-hr, • Competitive pay, • Yearly Bonus’s, • Advancement opportunities, • Insurance Re-Imbursement, • 401K, • Company Vehicle, • Fuel Card, • Travel Per Diem License: • Driver's License

Job DescriptionJoin the Snyder Environmental Family as a Construction Supervisor - Demo & Abatement Are you ready to make a real difference while building a rewarding career in a skilled trade? At Snyder Environmental, the premier environmental remediation firm of the central south, our Construction Supervisors are the first on site for commercial demolition and renovation projects-removing hazardous materials and making public spaces safer for everyone. From schools and hospitals to military installations and critical infrastructure, our work matters. We believe in doing well by doing good. That's why we offer competitive pay plus $40 per diem and paid lodging when traveling. Our team members enjoy competitive benefits, paid time off, and are treated like family. We invest in your well-being with up to 90% employer-paid health insurance, dental, vision, and company-paid life insurance. As a growing company, we foster advancement and provide opportunities for you to build your future with us. This position requires an asbestos abatement license, which we will provide at company expense if you do not already have one. To join our team, you must have reliable transportation, valid authorization to work in the United States, and the ability to obtain clearances for access to sensitive government facilities. If you have the skills, certifications, and drive to work in challenging environments-and want to be part of a company that values your contribution-Snyder Environmental is the place for you. Business Group/Dept: Operations FLSA: Exempt Reports To: Project Manager Date: February 14, 2022 Purpose of the Position Supervises and coordinates activities of assigned team of workers while demonstrating a commitment to safety, teamwork, and quality work with a high degree of managerial discretion. Reviews job specifications, inspects work site, and confers with contracting agent to evaluate removal project. Essential Position Responsibilities • Estimates length of time, number of workers, and equipment and supplies required to accomplish project., • Assigns and supervises workers in specific tasks, such as setup of equipment and removal and clean-up of asbestos., • Monitors and inspects quality of work during project., • Examines workers' equipment, such as respirator systems, air evacuation and filtration systems, and air quality testing devices, to ensure that they meet company and government safety standards., • May maintain project records and order supplies., • May assist workers in removal activities (see Asbestos Worker Position Description), • Counsels and disciplines workers regarding undesirable performance or behavioral issues in collaboration with Human Resources as applicable., • Responsible for scheduling, tracking attendance, and communicating time off requests and absences to the Project Manager or Human Resources, • Promotes safe and productive work environment with superior employee morale and engagement. Personal Protective Equipment (PPE): Half-face respirator; full-face respirator; steel toed footwear; hard hat; safety vest; protective eyewear; gloves; Tyvek suit Safety Sensitive: Yes Travel: 25% to 100% Licenses/Certifications Required: Asbestos Supervisor Initial Certification; Current Asbestos Supervisor Refresher; Current State Specific Asbestos Supervisor License; Current Valid Physician's Assessment; Current Respirator Fit Test Preferred Education: High School Diploma or GED; Bilingual English/Spanish; OSHA 30; CPR/First Aid Certification

Job Description Who we are: Build your career with Boldt. As a member of the Boldt team, you’ll collaborate with some of the most knowledgeable professionals in the construction industry. You’ll have the chance to learn new skills and seek greater responsibilities with a team that builds real value in the world around you. You’ll succeed in a workplace culture that recognizes, respects, and values differences. Boldt’s focus on innovation, collaboration, and employee development provides an opportunity for all our employees to Build Boldly. How your role fits into Boldt: As a Superintendent for The Boldt Company, your leadership will be a meaningful contribution on our projects that will ensure our projects get completed within budget, on schedule, and in a safe manner. You will schedule, coordinate, and supervise craft employee and subcontractor activities. This role is a valued member of the job site leadership team that provides leadership, development feedback, and mentorship to our construction team on the project. What you get to do: • Plan and supervise the work of our field employees, subcontractors, and trade partners. This includes figuring out method of construction, staffing levels, material quantities, equipment, power sources, and work schedules., • Work with our project teams during preconstruction to assist in scheduling, site logistics and presenting at interviews. Make improvements to the schedule as needed., • Develop cohesive teams to manage the work to ensure that the work is installed in compliance with and conforms to approved documents, established schedule, meets codes, and is consistent with our client's expectations., • Communicate issues (accident, inspections, job site difficulties, etc.) with the project team in a timely manner., • Resolve construction problems, complaints, and grievances within the workforce as the need arises and with the necessary documentation. Assist Labor Relations in maintaining communications with unions, resolving jurisdictional disputes, requisitioning required manpower, etc., as needed., • Monitor and maintain our safety program including documenting and correcting unsafe work practices and work hazards. Ensure all onsite activities are carried out in accordance with Boldt’s safety program and applicable OSHA (state and federal) regulations to meet our strategic goal of ZERO Incidents., • Ensure all necessary permits and insurance are in place and kept current., • Participate in the development of the master schedule; work with the project owner, project management, and subcontractors as required. Implement Boldt Production System (BPS) planning. Lead and facilitate BPS meetings as needed., • Monitor all jobsite document controls including daily reports, Built in Quality (BiQ) Program, Punch lists, schedule updates, payroll, quantity reporting, accident and incident reports, timesheets, RFIs and field issues or changes, and any other site activity., • Help identify potential budget problems and work with the team to develop contingency plans and other measures to control or successfully manage these., • Ensure any outstanding testing and inspection issues are resolved and complete., • Know project specifications, the contract, and the contract’s general conditions, and confirm that all materials and subcontract work align with contract documents and quality specifications., • Actively participate in and help recruit staff, including potential superintendents or foremen., • Demonstrate excellence as a construction team leader— demonstrate outstanding and equitable leadership skills and secure trust and confidence of our team, AHJ, inspectors, subcontractors, and clients., • Spend significant time on site providing leadership and oversite of field operations., • Lead self-perform crews and ensure materials, labor, equipment, and planning are available for successful execution., • Manage and forecast field General Conditions and General Requirements to maintain budget., • Review monthly billings as it relates to Work-in-Place (WIP), payrolls, material invoices and trade partner pay applications., • Maintain strict adherence to ethics and compliance requirements., • Four-year bachelor’s degree in construction management, engineering or related field. An equivalent combination of a high school degree with training and/or experience may be considered in lieu of a degree., • Seven years industry experience and four years supervisory experience in construction technology, methods, equipment, tools, and work procedures required., • Advanced understanding of construction scheduling, cost control and ability to control and supervise large groups essential., • Effectiveness in developing innovative construction methods and techniques for the project., • Must have basic understanding of craft jurisdiction and working under collective bargaining agreements., • Ability to mentor and train project team in all construction issues., • Awareness of the general construction, structural steel installation, crane setup, crane capacity, masonry, millwright work, heavy rigging, and critical lift plans., • Ability to show leadership and be calm under pressure., • OSHA 30 certification is preferred. While performing the duties of this job, the employee is occasionally required to position objects and operate tools or controls. Employee occasionally uses computer keyboard. The employee is occasionally required to position self to maneuver in confined or awkward spaces. The employee regularly is required to remain in a stationary position and move to access people or machinery or workspaces. Employee is occasionally required to ascend and/or descend a ladder or stairs to reach work areas. The employee must regularly move up to 20 pounds and occasionally move up to 50 pounds. The employee is regularly required to travel (as vehicle driver and as passenger on various modes of transportation) and frequently performs work on-site at construction work sites. Specific abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Employee views computer monitor regularly. The employee is required to be able to optimally communicate while on the job site and throughout the completion of duties. The working conditions of this position requires the employee to work both inside and outside in heat/cold, wet/humid, and dry/arid conditions. Frequently required to use personal protective equipment to maintain safety and prevent exposure to harmful materials. The environment for which this position functions may be exposed to prolonged loud noises and may contain scents and fragrances. May be requested to work overtime and weekends. What we can offer you: As an employee owned organization, along with a culture built around safety and team collaboration, we offer a variety of employee benefits. In addition to the standard health, 401K, and paid time off benefits, we also offer: • An Employee Stock Ownership Plan (ESOP) to share in the company’s success along with an annual bonus based on overall company performance, • Wellness resources, including a health mentor, health assessments, maternity management, wellness challenges and life care, • Have equal access to opportunities and resources at all levels of the company, • Opportunity to grow and persevere including educational reimbursement, • Diversity, equity, and inclusion training programs, • Mentorship program The Boldt Company is an equal opportunity employer. If you are an individual with a disability and you need an accommodation or other assistance during the application process, please contact our Human Resources department. The Boldt Company does not accept unsolicited resumes from third party recruiters.

Job Description Company: Davey Tree Surgery Company Locations: Oklahoma City, OK, Alva, OK, Chandler, OK, Choctaw, OK, El Reno, OK, Enid, OK, Guthrie, OK, Norman, OK, Seminole, OK, Shawnee, OK, Tecumseh, OK, Woodward, OK Additional Locations: North, South, East, and West of Oklahoma City, OK Work Site: On Site Req ID: 219016 Job Duties What You’ll Do: • Manage, direct and supervise crew leaders, field personnel and equipment as well as plan and execute assigned work by:, • Organizing and assigning crews and equipment to efficiently perform the required work, • Understand and follow all company policies, procedures, and work rules, • Maintain accurate records of required work, • Oversee the hiring and training of all Davey employees in territory, • Investigate accidents and promptly report to appropriate management, • Love of the outdoors, • Ability to complete Electrical Hazard Awareness Program and OSHA training, • Ability to complete the Davey Tree First Aid, CPR, and defensive driving course upon hire, • Required: valid driver’s license, • Required: Minimum 5 years' experience in utility line clearance, • Preferred: Commercial Driver’s License-Class A or B with Airbrake Endorsement, • Preferred: Other related tree work, • Preferred: relevant pesticide and related licenses and certificates, if required by state law, • Paid time off and paid holidays, • Opportunities for advancement, • All job specific equipment and safety gear provided, • 401(k) retirement savings plan with a company match, • Employee-owned company and discounted stock purchase options, • Group health plan, • Locations throughout US in major cities and desirable areas, • Career Development Program supported by industry expert safety specialists and skills trainers, • Scholarship program for children of employees We are currently looking to add a dynamic general foreperson to our passionate team of electrical facility maintenance professionals. Your office is outdoors, and you get a new view every day! The Davey Tree Expert Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to protected class, including race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national or ethnic origin, marital or familial status, disability, status as a protected veteran, status as an Aboriginal or Indigenous person, or other classification protected by law. The Davey Tree Surgery Company is based in Livermore, California, and provides a full range of utility tree care and pole test and treat services. The Davey Tree Expert Company provides research-driven tree services, grounds maintenance and environmental consulting for residential, utility, commercial and environmental partners in the U.S. and Canada. We care about our clients, each other and the world around us. We offer the resources, size and stability of a big company while maintaining the culture, entrepreneurial spirit and feel of a small one. We invest in our employees by offering industry-leading training, technology and benefits that lead to a rewarding and safe work experience at all levels. Wherever you want to grow your career, there’s a place for you at Davey. To learn more, visit Davey.com. Accommodations: If requested by employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions. If you need assistance at any time, please contact us at 1-877-411-7601 or at . Employment Type: Permanent Job Type: Full Time Travel Expectations: Up to 100%

Job DescriptionDescription: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK’s ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking an experienced telecom Construction Manager who will travel to oversee projects across the TAK network in various states (current projects will be in IN, TX, OK but there will be others coming). The Construction Manager will provide management and strategic direction for construction projects and teams across a regional footprint. Must be willing and able to travel 75% - 90% annually Why TAK? • Full Time, • Paid Weekly, • Compensation: $85K - $125K annually, DOE, • Full Benefits Package (Medical, Dental & Vision), • Paid Time Off, • Company provided vehicle, laptop, & phone, • 401(k) with Company Match!, • 25K Company Paid Life Insurance, • Independent Work & Team Collaboration, • Manage daily construction activities across multiple projects, • Supervise construction crews and subcontractors to ensure quality, compliance, and schedule adherence, • Travel throughout regional market to various projects as needed (+/-90% annually), • Conduct site walks, pre-construction meetings, safety audits, and closeout inspections, • Coordinate closely with permitting, engineering, real estate, and logistics teams to keep projects on track, • Track project milestones using company provided tools, • Coordinate material deliveries, equipment staging, and access logistics, • Support the Director of Construction in maintaining project budgets and schedules, • Serve as an on-the-ground escalation point for field issues; collaborate on resolution strategies, • Communicate project status, risks, and needs clearly to leadership and clients, • Ensure all work is performed in accordance with company safety protocols and applicable California regulations, • Document and verify completion of punch lists, redlines, and closeout packagesRequirements:, • 5+ years of total telecommunications construction experience including experience in a supervisory/leadership role, • Knowledge and prior work experience in telecom construction industry - coax splicing, fiber splicing, directional drilling, map reading, etc., • Knowledge and experience with aerial and underground construction, • Practical knowledge of Network operations and associated inventory for both RF and fiber networks, • Experience in estimating, bidding projects and change-order preparation, • Able to travel throughout regional market to various projects as needed (+/-90% annually), • Problem-solving and like to troubleshoot problems as they arise in the field, • Embrace the challenge of coaching and mentoring your team, • Working knowledge of Microsoft Office and the ability to learn custom software, • Excellent verbal, written and interpersonal communication skills, • Professional demeanor, • Must possess the capacity to learn, adapt to change, and become proficient quickly, • Ability to manage stress, exercise self-control, adhere to company policies and uphold the mission of the organization, • Ability to work a flexible schedule with varied hours; some evenings and weekends as needed, • OSHA 10 certification a plus, • Must provide a valid government-issued photo ID for verification; a driver’s license is required if the role involves driving, • Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .

Job Description Job Title: Iron Worker / Welder Location: Oklahoma City, Oklahoma Pay Rate: $28–$32 per hour (DOE) Hours: 45–55 hours per week, with overtime available Per Diem: $100.00 per day worked (must meet eligibility requirements) Job Summary: We are seeking skilled Iron Workers/Welders to join our team in Oklahoma City, OK. This role involves the fabrication, installation, and repair of structural steel components while maintaining strict adherence to project specifications, safety standards, and quality requirements. Responsibilities: • Set up hoisting and rigging equipment to lift and position structural steel members., • Attach steel components to hoists using chains, cables, or ropes., • Signal crane or hoist operators to ensure safe lifting and placement., • Guide steel members into position using tag lines and hand tools., • Align, bolt, and temporarily secure components with spud wrenches, drift pins, and related tools., • Verify vertical and horizontal alignment using levels, plumb bobs, and measuring tools., • Bolt or weld steel components to permanently secure structures., • Perform cutting and welding operations using oxyacetylene and related equipment., • Load, transport, and unload tools, materials, and equipment., • Assist with placement, positioning, and securing of steel during installation., • Maintain tools and equipment, performing minor repairs and cleaning as needed., • Follow all company and site-specific safety procedures and wear required PPE., • OSHA 10 or higher certification required, • Must pass a pre-employment drug screen, • High level of precision with strong attention to detail, • Solid understanding of basic rigging principles and shop mathematics, • Skilled in selecting and using proper tools, equipment, and materials, • Ability to distinguish differences in size, shape, and form, • Must meet company quality requirements to receive per diem, • Reliable, safety-focused, and able to work effectively within a team

Creating Life Better Here starts with you. At San Juan Regional Medical Center, we're more than a healthcare provider—we're a values-driven organization dedicated to delivering exceptional care. As a team member, you help fulfill our mission to make life better here for our community. The Registered Nurse is a sincerely caring and compassionate professional and assumes accountability in utilizing the nursing process to provide dynamic patient management. FT Nights 7pm-7:30am Required Behaviors: • As you go about fulfilling this mission, your work habits and work relationships should embody SJRMC's values. These values are our culture, our identity as an organization: Sacred Trust, Personal Reverence, Thoughtful Anticipation, Team Accountability and Creative Vitality ask more of us than merely completing some list of tasks. Our values ask for a deeper level of commitment, and what is asked of us we freely give because we believe in our mission. Required Qualifications: • Current licensure by the State Board of Nursing of New Mexico or compact (multi-state) license, • Basic Life Support (BLS) Certification, • Must meet the requirements for obtaining and maintaining life support certifications as outlined in the Life Support Certification policy Duties and Responsibilities: • Provides individualized patient care and maintains clinical competency appropriate for the area of practice, • Prioritizes patient care based on acuity and assures continuity of safe/effective care of patients, • Understands and follows policy and procedure in addition to meeting licensure requirements, • Responsive to current safety and quality initiatives and sustains improvement, • Builds productive interpersonal relationships in every encounter, • Demonstrates teamwork and delegates appropriately to other team members, • Actively participates in the department, • Proactively seeks continued growth and development, • Supports the philosophy of San Juan Regional Medical Center by facilitating the cooperation of the hospital staff in a multi-disciplinary approach to problem solving, • Upholds established Core Values, Standards of Practice, Standards of Care, philosophy, and goals of the Nursing Department and organization, • Serves as a role model for staff by demonstrating a positive attitude and holistic approach to patient care and a commitment to the nursing process, • Assesses the patient’s condition and nursing needs utilizing the nursing process, • Is able to deliver interdisciplinary care to patients across the lifespan: OB/Peds through the nursing process of assessment, planning, intervention, and evaluation and appropriately documents the care of assigned patients, • Sets expected outcomes/goals and prescribes appropriate nursing interventions in cooperation with the patient, the patient’s family and/or the significant other, • Uses advanced and specialized knowledge and skills to proficiently assess, plan, implement, evaluate, and document the care of assigned patients, • Assesses the patient/family significant other’s educational needs and develops an appropriate plan to meet the needs as evidenced by documentation on the Patient’s Plan of Care, • Follows guidelines described in the Ethics and Compliance Code of Conduct Compliance Plan, • Demonstrates an understanding of DNV accrediting process as it pertains to his/her position and responsibilities and responds accordingly, • Each employee is responsible for implementing SJRMC’s Service Standards into their daily work: Safety, Courtesy, Effectiveness, and Stewardship, • Other duties as assigned Physical Demands and Environmental Work Conditions: • Must be able to see with corrective eyewear and hear clearly with assistance, • Must be able to walk, stand, bend, squat, climb, kneel, and twist frequently, • Must be able to lift greater than fifty (50) pounds and push up to three hundred (300) pounds frequently, • Potential exposure to blood and bodily fluids and meets OSHA training requirements Special Demands: • Sets limits when dealing with angry, hostile, or sometimes verbally or physically abusive patients and families in an attempt to ensure a safe, respectful environment that will support the delivery of care, • Effectively copes and strives for balance when caring for acutely ill patients and families

Job DescriptionWe are seeking an experienced Site Superintendent to lead daily on‑site construction operations for our client, a leader in commercial construction throughout the Oklahoma City area. This role ensures projects are delivered safely, on schedule, and to high quality standards while coordinating subcontractors, maintaining documentation, and supporting field teams.Key Responsibilities• Oversee daily site operations and subcontractor adherence to scope• Lead safety meetings, inspections, and daily huddles• Maintain field logs, redlines, photos, and documentation (Buildertrend or similar)• Verify layout, elevations, and compliance with construction drawings• Enforce site safety, cleanliness, PPE, and access control• Track weather delays, deliveries, RFIs, and daily reporting• Coordinate with engineers, inspectors, owners, and field staff• Manage punch lists and support final inspections Qualifications• 7–15 years of commercial construction field experience• Strong knowledge of PEMB, concrete, MEP, utilities, and punch management• Skilled in reading plans and resolving layout issues• OSHA 30 and Buildertrend experience preferred• Valid driver’s license, clean driving record, and reliable vehicle• Authorized to work in the U.S.; English proficiency (Spanish bilingual preferred) Work Environment• Active job site environment with frequent walking, climbing, and outdoor exposure• Must have a valid driver's license and reliable vehicle• Ability to lift up to 50 lbs. as needed Performance & Growth• Weekly KPI reviews and project closeout evaluations• Annual compensation review• Performance‑based incentives and clear career advancement pathwaysBenefits: --Recognition and performance incentives tied to project success--Paid Time Off (PTO) & Paid company holidays--Monthly stipend for vehicle and expenses--Cell phone reimbursement or company-issued phone--Professional development and continuing education opportunities--Performance reviews conducted annually, with potential for salary advancement--Collaborative, family-oriented work environment focused on integrity, quality, and long-term growth--Direct involvement in design-build projects across Oklahoma and surrounding --Opportunities for advancement within a growing company We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Creating Life Better Here starts with you. At San Juan Regional Medical Center, we're more than a healthcare provider—we're a values-driven organization dedicated to delivering exceptional care. As a team member, you help fulfill our mission to make life better here for our community. The Registered Nurse is a sincerely caring and compassionate professional and assumes accountability in utilizing the nursing process to provide dynamic patient management. FT Days 7am-7:30pm Required Behaviors: • As you go about fulfilling this mission, your work habits and work relationships should embody SJRMC's values. These values are our culture, our identity as an organization: Sacred Trust, Personal Reverence, Thoughtful Anticipation, Team Accountability and Creative Vitality ask more of us than merely completing some list of tasks. Our values ask for a deeper level of commitment, and what is asked of us we freely give because we believe in our mission. Required Qualifications: • Current licensure by the State Board of Nursing of New Mexico or compact (multi-state) license, • Basic Life Support (BLS) Certification, • Must meet the requirements for obtaining and maintaining life support certifications as outlined in the Life Support Certification policy Duties and Responsibilities: • Provides individualized patient care and maintains clinical competency appropriate for the area of practice, • Prioritizes patient care based on acuity and assures continuity of safe/effective care of patients, • Understands and follows policy and procedure in addition to meeting licensure requirements, • Responsive to current safety and quality initiatives and sustains improvement, • Builds productive interpersonal relationships in every encounter, • Demonstrates teamwork and delegates appropriately to other team members, • Actively participates in the department, • Proactively seeks continued growth and development, • Supports the philosophy of San Juan Regional Medical Center by facilitating the cooperation of the hospital staff in a multi-disciplinary approach to problem solving, • Upholds established Core Values, Standards of Practice, Standards of Care, philosophy, and goals of the Nursing Department and organization, • Serves as a role model for staff by demonstrating a positive attitude and holistic approach to patient care and a commitment to the nursing process, • Assesses the patient’s condition and nursing needs utilizing the nursing process, • Is able to deliver interdisciplinary care to patients across the lifespan: OB/Peds through the nursing process of assessment, planning, intervention, and evaluation and appropriately documents the care of assigned patients, • Sets expected outcomes/goals and prescribes appropriate nursing interventions in cooperation with the patient, the patient’s family and/or the significant other, • Uses advanced and specialized knowledge and skills to proficiently assess, plan, implement, evaluate, and document the care of assigned patients, • Assesses the patient/family significant other’s educational needs and develops an appropriate plan to meet the needs as evidenced by documentation on the Patient’s Plan of Care, • Follows guidelines described in the Ethics and Compliance Code of Conduct Compliance Plan, • Demonstrates an understanding of DNV accrediting process as it pertains to his/her position and responsibilities and responds accordingly, • Each employee is responsible for implementing SJRMC’s Service Standards into their daily work: Safety, Courtesy, Effectiveness, and Stewardship, • Other duties as assigned Physical Demands and Environmental Work Conditions: • Must be able to see with corrective eyewear and hear clearly with assistance, • Must be able to walk, stand, bend, squat, climb, kneel, and twist frequently, • Must be able to lift greater than fifty (50) pounds and push up to three hundred (300) pounds frequently, • Potential exposure to blood and bodily fluids and meets OSHA training requirements Special Demands: • Sets limits when dealing with angry, hostile, or sometimes verbally or physically abusive patients and families in an attempt to ensure a safe, respectful environment that will support the delivery of care, • Effectively copes and strives for balance when caring for acutely ill patients and families

Amazon warehouse associates hiring in your area.If you are looking for outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, the Amazon Logistics Team has you covered! Qualifications, High School or equivalent diploma,Experience with Windows Op

Aerotek - JobID: JP-005775706 [Warehouse Associate / Package Handler] As a Material Handler at Aerotek, you'll: Operate both sit-down and stand-up forklifts; Perform RF scanning, wrapping pallets, shipping, and receiving; Perform other duties as assigned.

GXO Logistics - JobID: 1357834000 [Warehouse Associate / Package Handler] As a Material Handler at GXO Logistics, you'll: Support operations by moving material and inventory throughout the facility; Use hand trucks, conveyors or other material handling equipment; Perform duties that may include pack

Aerotek - JobID: JP-005774933 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Aerotek, you'll: Be responsible for loading, unloading, moving, and stocking; Perform staging of products and materials; Use a forklift, clamp truck, or other power equipment.

Pratt Industries - JobID: 92-21694 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Pratt Industries, you'll: Operate and care for the forklift in a safe manner; Complete and document a forklift inspection form before start of shift and when operating a new forklift; Locate stock

Amazon warehouse associates hiring in your area.If you are looking for outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, the Amazon Logistics Team has you covered! Qualifications, High School or equivalent diploma,Experience with Windows Op

Cintas Corporation - JobID: 1358202800 [Warehouse Associate / Package Handler] As a Loader/Unloader at Cintas, you'll: Drive the trucks around the lot; Load and unload the uniform garments and/or additional facility services products into and out of company trucks; Ensure daily accuracy of products

Amazon warehouse associates hiring in your area.If you are looking for outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, the Amazon Logistics Team has you covered! Qualifications, High School or equivalent diploma,Experience with Windows Op

Cintas Corporation - JobID: 1357386200 [Warehouse Associate / Package Handler] As a Loader/Unloader at Cintas, you'll: Drive the trucks around the lot; Load and unload the uniform garments and/or additional facility services products into and out of company trucks; Ensure daily accuracy of products

Amazon warehouse associates hiring in your area.If you are looking for outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, the Amazon Logistics Team has you covered! Qualifications, High School or equivalent diploma,Experience with Windows Op

We are seeking a skilled and reliable Forklift Operator to join our team.The ideal candidate will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within our warehouse or distribution facility.This position plays a key role in maintaining efficiency and

Amazon warehouse associates hiring in your area.If you are looking for outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, the Amazon Logistics Team has you covered! Qualifications, High School or equivalent diploma,Experience with Windows Op

We are seeking a skilled and reliable Forklift Operator to join our team.The ideal candidate will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within our warehouse or distribution facility.This position plays a key role in maintaining efficiency and

Amazon warehouse associates hiring in your area.If you are looking for outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, the Amazon Logistics Team has you covered! Qualifications, High School or equivalent diploma,Experience with Windows Op

We are seeking a skilled and reliable Forklift Operator to join our team.The ideal candidate will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within our warehouse or distribution facility.This position plays a key role in maintaining efficiency and

Amazon warehouse associates hiring in your area.If you are looking for outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, the Amazon Logistics Team has you covered! Qualifications, High School or equivalent diploma,Experience with Windows Op

Oversees, maintains, and repairs building support systems in a complex, warehouse environment.Also, performs maintenance related functions in support of warehouse operations.This role plays a critical part in sustaining operational efficiency and safety standards through proactive upkeep and repair

Amazon warehouse associates hiring in your area.If you are looking for outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, the Amazon Logistics Team has you covered! Qualifications, High School or equivalent diploma,Experience with Windows Op

We are seeking a skilled and reliable Forklift Operator to join our team.The ideal candidate will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within our warehouse or distribution facility.This position plays a key role in maintaining efficiency and

Is a good work environment with good.Are you looking for a company that is.If this is you, then please consider Silver Star Construction as the right company for you!.Moore, OK 73160, USA - *Full-Time.Silver Star Construction, a local road construction company - is seeking a Asphalt Laborer to perfo

We are seeking a skilled and reliable Forklift Operator to join our team.The ideal candidate will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within our warehouse or distribution facility.This position plays a key role in maintaining efficiency and