Trabajos refrigeration en Louisville, KentuckyCrear alertas

Job DescriptionCompany: US0011 Sysco Louisville, Inc.Sales Territory: NoneZip Code: 40214Travel Percentage: 0 COMPENSATION INFORMATION:The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors • Pay : Up to $41.30/hour, based on experience., • 3rd Shift available, Monday to Friday 03:00 PM – 12:00 AM., • Shift Differential available., • $600 Annual Tool Allowance., • Annual Boot Allowance., • Outstanding benefits: www.syscobenefits.com., • Excellent full-time career with a stable and growing company., • Move your career FORWARD with Sysco Foods! JOB SUMMARY:To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES: • Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet., • Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies)., • Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment., • Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment., • Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer)., • Address all Driver Vehicle Inspection Report write ups timely, and efficiently., • Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems., • Follow procedures including documenting all work performed on work orders., • Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility., • May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible., • Proficient in electrical meter testing, • Knowledge of controls and electric (DC (distribution center) low voltage, • Electric motor knowledge (DC), • Complete electrical repairs and welding projects as needed. QUALIFICATIONS:Education: • High school diploma or GED required., • Current and valid driver's license (CDL Preferred, Not Required). Experience: • Medium / Heavy Duty truck technical training., • 2-year school and 4 years of experience OR., • 5 years of experience in fleet maintenance and repair. Certifications, Licenses and/or Registrations: • Annual Inspector Certification Knowledge, Skills and Abilities., • Brake Inspector Certification Knowledge, Skills and Abilities., • ASE certifications & Automotive or Medium/Heavy Duty Trucks., • EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification. Professional Skills: • Expert knowledge and skill of all vehicle systems and components., • Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment., • Expert knowledge and skill in diagnosis and repair of refrigeration systems., • Expert knowledge and skill in Preventive Maintenance Inspections and repair., • Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG)., • Moderate computer skills and knowledge., • Expert knowledge of all DOT (FMCSA) regulations., • Moderate knowledge of OSHA safety regulations., • Moderate knowledge of environmental regulations., • Working knowledge of computer-based diagnostic software for OEM's and component manufacturers., • The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics. Physical Demands: • While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear., • The employee is frequently required to sit and reach with hands and arms., • The employee must occasionally lift and/or move up to 20 pounds., • While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear., • The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl., • The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs., • The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus., • Ability to operate various pieces of equipment., • Ability to stand, sit, walk, bend, reach., • Ability to push/pull., • Ability to lift /carry., • Ability to grasp tools., • Ability to perform Repetitive motion: wrenches and hand tools., • Working conditions: Frequently works outdoors. Working Conditions: • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces., • The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call., • The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.)., • The associate is occasionally exposed to high, precarious places and confined spaces., • The associate is occasionally exposed to fumes or airborne particles., • The noise level in the work environment is usually moderate. BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW:Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT:Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Job Description throughout North America with a tradition of unparalleled, personalized service to clients, utilizing first-class equipment and advanced technology. Job Summary Provides required maintenance, including diagnosis and repair of Hogan tractor and truck equipment, including the removal, replacement and repair of any and all components of the tractor or truck. Essential Duties and Responsibilities • Provides preventive maintenance and DOT inspections using the correct procedures and guidelines., • Diagnoses and repairs tractors and trucks using well-established policies and procedures, as well as hand and power tools; this includes, but is not limited to, various types of braking systems (hydraulic, air, disc), electrical systems, clutches, air conditioning and heating systems and instruments and gauges, steering mechanisms, wheels, tires, batteries, lift-gate assemblies and auxiliary power units., • Identifies parts and/or systems for repair; repairs or replaces, as appropriate., • Removes broken parts and replaces with new or reconditioned parts., • Road tests vehicles to diagnose issues and ensure a safe operating vehicle., • Uses hydraulic jacks to raise equipme, • Inspect, repair and maintain general trailer structural and suspension systems., • Perform routine maintenance, such as changing oil, checking batteries and lubricating equipment and machinery., • Use required testing instruments by attaching to equipment, read dials and gauges to diagnose malfunctions., • Maintain accurate, updated preventative maintenance records., • Other duties as required., • Works outdoors in the elements. Requirements • CDL License, Class A or B (minimum Class B CDL is required at time of hire), • 5+ years of experience in trade as mechanic, • Refrigeration License, • EPA License (as appropriate), • High school education or GED, • In-depth knowledge of all hand, air and power tools required for this industry, • Basic understanding and knowledge of welding and Oxy/Acetylene cutting procedures, • Overall complete knowledge with comprehensive truck/trailer repair, • Extensive diagnostic and repair knowledge including all areas of discipline manufactured with various OEs, • Clean MVR, • Effective written and verbal communication skills, • Ability to work well in a team environment, • Must be self-motivated

Job Description At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. Are you mechanically inclined with a knack for hands-on work? Do you enjoy a flexible schedule and working independently, but also have the support of a team? The Equipment Service Technician is a remote based Customer facing employee, primarily working inside hospitals.You will be responsible for troubleshooting and repairing medical equipment used in surgical procedures, as well as providing installation support on complex mechanical, electromechanical and electronic units. This is STERIS' main line of OEM equipment (Washers, Sterilizers, Ultrasonics, Steam Generators, Cart Washers), it is our largest equipment portfolio (160 pieces), and consists of the equipment our company was founded on. Come advance your career with us in this role! Individuals with experience working in HVAC repair, Mechanics, Maintenance, Refrigeration, Boilers, Chillers, Equipment Repair, Diesel and Automotive Repair, Aviation Repair, Plumbing, Electrical, etc. are often successful. What You'll do as an Equipment Service Technician: • Perform fundamental troubleshooting, repairs, and maintenance of STERIS and competitor equipment, systems and components., • Manage time effectively by prioritizing Customer and business needs and schedules autonomously to complete PM performance, service calls, warranty calls, equipment installations, field upgrade programs and other duties., • Work with cross functional teams (Tech Support, Engineering and Service Contract Management), to escalate issues appropriately and utilizes advanced technology platforms to complete compliance regulatory requirements and resolve and document troubleshooting issues., • The Technician will provide Customers with information, pricing and repair options. With management support, build relationships with Sales to drive Customer experience and revenue opportunities. Learn to identify sales opportunities in assigned territory., • Provide support to various locations within assigned territory depending on the service agreements and Customer needs. The Experience, Skills and Abilities Needed:, • High School Diploma or GED with 4+ years of work experience, with 2 of those years in a mechanical/technical role. Associates degree or related certifications in technical/mechanical area, competitive equipment training or related military experience may be considered towards technical experience requirement., • Valid driver’s license and the ability meet all required background and physical assessment elements to obtain and maintain existing and new vendor credentialing requirements., • Ability to meet all required background and physical assessment elements to obtain and maintain existing and new vendor credentialing requirements., • Customer and team engagement experience., • Effective written and verbal communication skills., • Basic computer skills (MS windows/email, navigation, mobile app, and ability to data input into a multisystems)., • Must be able to meet flexible schedules with potential overnights, as well as early/late hours, based on Customer and business needs., • Must be able to be compliant with hospital/customer credentialing requirements. What STERIS offers: We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being, and financial future. Here is just a brief overview of what we offer: -Base Salary+ Incentive Compensation Program -Company Provided Vehicle+ Cell Phone+ Laptop -Hands-on Training Program -Paid Time Off + 9 Corporate Holidays Per Year -Excellent Healthcare, Dental, and Vision Benefits -Healthcare and Dependent Flexible Spending Accounts -Long/Short Term Disability Coverage -401(k} with a Company Match -Parental Leave -Tuition Reimbursement Program -Additional Add-On Benefits/Discounts -Assessment and Promotional opportunity after 18 months of service Pay range for this opportunity is $65,000.00 - $75,000.00. This position is eligible for bonus. Minimum pay rates offered will comply with county/city minimums, if higher than range listed.Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio.Click here for a complete list of benefits: STERIS Benefits STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention.WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare, life sciences and dental products and services. STERIS is a $5 billion, publicly traded (NYSE: STE) company with approximately 17,000 associates and Customers in more than 100 countries. STERIS is an Equal Opportunity Employer.We are committed to equal employment opportunity and the use of affirmative action programs to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law.We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location’s HR Office during normal business hours.

Job Description Journeyman HVAC Service Technician Louisville, KY Description This is a full-time role at TP Mechanical. Position Summary: Work includes HVAC heating, cooling, boiler, chiller, and refrigeration systems. Applicant should be able to read and understand blueprints, communicate effectively with all other persons on the jobsite, including our sub-contractors, and represent TP Mechanical Contractors in a professional manner. Applicant should also be able to accept direction and/or lead and delegate the work if necessary. Responsibilities and Duties: • Troubleshoot and solve HVAC rooftop units, make up air, boiler, chiller, and control system problems. VRF system knowledge is a plus., • Follows up with customers for quality assurance purposes and ensures customers are 100% satisfied., • Can work independently with little direction and is capable of solving problems (i.e., contacting factory, engineer, architect, foreman, etc.)., • Attends, if needed, all job site and office meetings related to assigned projects. Is well prepared to handle issues that may come up. Fills out all forms, revisions, requests for tools/equipment/material that are required for each project., • Has the ability to identify and locate parts/suppliers., • On call as required and fills out the corresponding paperwork in a timely and accurate manner., • Dependable and able to work in emergency situations when called., • All other duties as assigned. Requirements Qualifications and Experience: • 5 years commercial experience in plumbing, HVAC and refrigeration, • Stable work history, • HVAC and brazing license a plus, • EPA or Universal License a plus, • Type 2 or Universal Refrigerant License, • HVAC chiller and boiler certifications a plus Job Skills: • Ability to read blueprints, • HVAC and refrigeration repair and installation., • Working knowledge of all hand and power tools., • Able to use all specialty tools including Recovery Machine, Multi Meter, Combustion Analysis., • Control experience a plus, • Able to install equipment, • Very strong technical background., • Works within precise limits or standards of accuracy and productivity., • Exceptional communication skills., • Excellent organizational skills. Education: • High School or GED Equivalent, • Trade School a plus Physical Requirements: • Eyesight correctable to 20/50, • Able to work long hours on feet., • Able to lift and climb ladders and scaffolds, • Able to perform shift work, • Must be able to lift objects weighing up to 60 lbs., • Must be able to work outdoors in various weather conditions., • Must not be afraid of heights Special Requirements: • Valid Drivers License, • Must provide their own basic hand tools For these desirable skills, TP Mechanical Contractors will offer a competitive salary along with a full benefits package including medical, dental, life insurance, short term disability, long term disability, 401k with company match, paid vacations and holidays. This is an exceptional opportunity to make a real impact with a strong and growing organization that has been in business for over 60 years!

Job Description LOGZONE is a premier Small Disadvantaged Business (SDB), and a Veterans Administration-Certified Service-Disabled Veteran-Owned (SDVOSB) firm. Since 2007, LOGZONE has provided services in Logistics and Materiel Management, Facilities Operations and Maintenance, Integrated Logistics Support and Planning, and Medical Support. We strive to provide quality support services throughout the project life cycle. Our ability to remain a responsive resource to our customers and partner companies has allowed us to earn their trust and build positive relationships through performance. We are looking for qualified candidates with the same vision to succeed! Perfect Part-Time Opportunity for someone finishing training or someone who is retired looking for something to do! Must have HVAC experience. Afternoon hours, 3:00PM - 5:00PM Monday - Friday! Summary/Objective: The Heating, Ventilation, and Air-Conditioning Mechanic installs, services and repairs environmental-control systems in residences, department stores, office buildings, and other commercial establishments, utilizing knowledge of refrigeration theory, pipefitting and structural layout. Essential Functions: • Mounts compressor and condenser units on platform or floor using hand tools,, • Follows blueprints or engineering specifications, • Fabricates, assembles and installs ductwork and chassis parts,, • Uses portable metalworking tools and welding equipment,, • Installs evaporator unit in chassis or in air-duct system, using hand tools., • Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools, • Cuts and threads pipe, using machine-threading or handthreading equipment, • Joins tubing or pipes to various refrigerating units by means of sleeves, couplings or unions, and solders joints, • Uses torch, forming complete circuit for refrigerant, • Installs expansion and discharge valves in circuit., • Connects motors, compressors, temperature controls, humidity controls, and circulating ventilation fans to control panels and, • Connects control panels to power source, • Installs air and water filters in completed installation, • Injects small amount of refrigerant into compressor to test systems and adds Freon gas to build up prescribed operating pressure., • Observes pressure and vacuum gauges and adjusts controls to insure proper operation, • Tests joints and connections for gas leaks, using gauges or soap and-water solution, • Wraps pipes in insulation batting and secures them in place with cement or wire bands, • Replaces defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units, • Manage and operates Boiler and Chiller plants by maintaining system temperatures and equipment runtimes through the BAS system, • May install, repair and service air conditioners, chillers, and cooling towers ranging from one and a half to two hundred tons in laboratory and office buildings. Education and Experience: • EPA Universal Certification LOGZONE is an equal opportunity employer. We encourage diversity in our workforce. LOGZONE provides equal employment opportunities to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws, or any other factor protected by law. If you require a reasonable accommodation to apply for a position with LOGZONE through our online applicant system, please email careers@logzoneinc.com for assistance. Minorities, females, disabled and protected veterans are urged to apply. LOGZONE is a VEVRAA Federal Contractor. Job Posted by ApplicantPro

Job Description Senior Commercial HVAC/R Service Technician Location: Louisville, KY Experience: 5+ Years $40-$45 per hour BOE Why Join This Opportunity? Our client is a respected mechanical services provider known for delivering high-quality commercial HVAC and refrigeration solutions. This role offers autonomy, exposure to complex systems, and the opportunity to work in a fast-paced, technically challenging environment. Role Overview The Senior HVAC/R Service Technician will diagnose, repair, and maintain advanced commercial HVAC and refrigeration systems. This position requires strong troubleshooting skills, deep refrigeration knowledge, and the ability to work independently across a variety of equipment. Key Responsibilities • Service and repair VRV/VRF systems, chillers, boilers, rooftop units, and walk-in freezers/coolers, • Diagnose refrigeration circuits, electrical systems, and control components, • Perform brazing, leak detection, evacuation, and refrigerant charging, • Interpret schematics, wiring diagrams, and sequences of operation, • Conduct preventive maintenance and complete detailed service reports, • Support equipment startup and commissioning, • Communicate effectively with customers and internal teams, • Participate in an on-call rotation Success Metrics • High first-time fix rate, • Minimal downtime and callbacks, • Accurate documentation and reporting, • Strong customer satisfaction Who You Are A self-driven technician who thrives in the field, solves complex problems efficiently, and delivers high-quality work with minimal supervision. Qualifications & Experience • 5+ years of commercial HVAC/R experience, • Strong background in refrigeration and low-temp systems, • Experience with VRV/VRF, chillers, boilers, and packaged units, • Advanced electrical troubleshooting skills, • Ability to read schematics and control diagrams, • Proficient in brazing and refrigerant best practices, • Working knowledge of BAS/DDC systems Required Certifications • Kentucky Journeyman HVAC License, • EPA Certification (Universal preferred), • Valid driver’s license Apply Now Take the next step in your career and work on complex, high-impact systems in a dynamic environment. Candidates must be legally authorized to work in the United States without current or future sponsorship. Employment eligibility will be verified at the time of hire.

Job Description Insomnia Cookies was founded in a college dorm room by then-student, Seth Berkowitz. Fast forward 20 years and so... many....cookies... later, our innovative bakery + delivery concept has become a cult brand known for its rabid following of cookie lovers who crave Insomnia’s warm, delicious delivery all day and late into the night. With an expanding footprint of over 350 stores globally, an experiential, “sweet-easy” flagship concept, and large scale operations and delivery capabilities ... Insomnia Cookies is revolutionizing the cookie game by truly "Imagining What’s Possible"! ABOUT THE ROLE: As a Bakery Operations Manager at Insomnia Cookies, you’re not just managing a bakery. You’re building a team, creating the experience our guests come back for and owning the results of your business. You’re the leader, setting the standard for your team, your guests, your cookies, and your results. You’ll hire and develop great people, create an environment where they can thrive, deliver an exceptional guest experience, and drive the sales and operational results your bakery is expected to achieve. This is a hands-on leadership role. You’ll be actively engaged in the day-to-day operation, know your business, understand what drives performance, and take action to hit your sales targets and improve results. That means coaching and developing your team, leading through busy late-night rushes, connecting with guests, and finding new ways to grow your business. If you love developing people, driving results, delivering great experiences, and making things happen in a fast-paced environment, you’ll fit right in. And as Insomnia grows, you’ll have plenty of opportunity to grow with us. WHAT YOU’LL DO: Operational Execution • Own the day-to-day operation of your bakery, ensuring every shift is staffed, prepared, and set up for success., • Maintain high standards for cookie quality, speed, accuracy, cleanliness, food safety, and overall bakery execution., • Own scheduling and labor execution, balancing the needs of your team with the needs of the business., • Manage ordering, inventory accuracy, product rotation, shrink, and other bakery controls., • Maintain strong operational routines and quickly address gaps when standards aren’t being met. Guest Experience • Bring our Always Warm promise to life, creating a bakery experience that feels welcoming, energetic, and unmistakably Insomnia., • Set the standard for genuine hospitality and coach your team to deliver friendly, fast, and memorable service on every shift., • Stay close to the guest experience, recognize opportunities to make it better, and take action when we miss the mark. Talent & Team Development • Hire, onboard, coach, and develop a strong team of Shift Leaders, Cookie Crew, and Delivery Drivers., • Create a culture where expectations are clear, great performance is recognized, and team members are supported and held accountable., • Provide consistent coaching and real-time feedback that helps your people grow and get better., • Develop Shift Leaders who can confidently lead great shifts, coach their teams, and solve problems., • Build a strong talent pipeline and create opportunities for team members to grow their careers with Insomnia. Leadership & Ownership • Take ownership of your bakery’s performance, knowing your sales and key performance measures and taking action to achieve your goals., • Understand what drives your business, identify opportunities, and turn them into action., • Lead with urgency, accountability, and consistency, especially during peak and late-night shifts., • Partner with your District Manager and field leadership to solve problems and continuously improve your bakery., • Build connections in your local community and execute local marketing activities that drive awareness, traffic, and sales. MINIMUM QUALIFICATIONS: • 3+ years of management or leadership experience in restaurant, retail, hospitality, or another fast-paced customer-facing environment., • Availability to work a schedule that reflects the needs of the bakery, including 2–3 mid-to-late shifts during the latter part of the week (Thursday–Sunday)., • A hands-on, player-coach leadership style and willingness to jump in wherever your team and business need you., • A track record of hiring, coaching, developing, and retaining great teams., • A natural sense of hospitality and commitment to delivering an exceptional guest experience., • Strong business acumen and the ability to understand performance, set priorities, and turn goals into action., • Strong communication, organization, and problem-solving skills., • Comfort learning and using restaurant/retail technology and business systems., • Ability to obtain any required food safety certifications applicable to the location., • Ability to perform the essential functions of the position with or without reasonable accommodation. Physical Requirements This is a hands-on bakery leadership role. This position regularly requires the ability to: • Stand and walk for extended periods of time, including up to 8 hours during a shift., • Frequently reach, bend, stoop, twist, kneel, and lift., • Lift, carry, push, and pull up to 30 pounds regularly., • Occasionally lift up to 50 pounds with assistance., • Use hands and fingers to handle bakery equipment, food products, technology, and point-of-sale systems., • Safely operate bakery and kitchen equipment in accordance with company procedures., • Work in environments with varying temperatures, including around ovens, freezers, and refrigeration units., • Read order screens, reports, recipes, schedules, and safety information., • Communicate effectively with guests and team members in a fast-paced environment with frequent interruptions., • Ability to work nights and weekends Work Environment This position works in a fast-paced bakery environment that includes frequent interaction with guests, exposure to heat from ovens, refrigerated storage areas, cleaning chemicals, and moderate noise levels. Evening, late-night, weekend, and holiday shifts are a regular part of the business. Bakery Operations Managers are expected to be actively engaged in bakery operations and able to perform the essential duties of bakery team members when needed. Schedule Expectations Our business comes alive in the evenings and late into the night. Bakery Operations Managers are expected to work a schedule that reflects the needs of their bakery including weekends and holidays as business needs require. Bakery Operations Managers work a minimum of 45 hours per week. As the leader of the bakery, schedule flexibility is important, particularly during peak business periods, staffing needs, and other times when leadership presence is needed. Equal Employment Opportunity Insomnia Cookies is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where everyone feels welcome. We consider all qualified applicants for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other protected characteristic under applicable federal, state, or local law. Reasonable Accommodation If you require a reasonable accommodation during any part of the application or hiring process, please let us know. We are committed to providing reasonable accommodations to qualified individuals with disabilities. Additional Information Employment with Insomnia Cookies is contingent upon successful completion of any background checks, employment verification, and other pre-employment requirements applicable to the position and permitted by law. Ready to Join? We’re looking for leaders who bring great energy, take ownership, develop great teams, and love making someone’s day a little sweeter. When you join Insomnia Cookies, you'll enjoy: • Competitive base pay plus quarterly performance bonus opportunity, • Monthly Cell Phone Stipend, • Early Wage Access (get paid the next day!), • Employee discount (free cookies!), • Career development and advancement opportunities as Insomnia continues to grow, • Comprehensive benefits (Medical, Dental, Vision) including 401k company match that begin 30-days after employment If you’re ready to lead from the front, grow your career, and help create warm moments one cookie at a time, we’d love to have you join the Insomnia Cookies family. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Perfection Group is hiring skilled Commercial HVAC Service Technicians to support our Louisville team. We’re looking for experienced technicians who take pride in solving problems, communicating well with customers, and delivering safe, high-quality work. You’ll service a variety of commercial and industrial HVAC systems while receiving paid drive time, a company vehicle, major tools, and continued technical training. What You’ll Do • Troubleshoot, repair, and maintain commercial HVAC and refrigeration equipment, including chillers, boilers, rooftop units, split systems, and heat pumps, • Diagnose mechanical, electrical, refrigeration, and controls-related issues, • Identify necessary repairs, obtain replacement parts, and calibrate equipment according to manufacturer recommendations, • Explain equipment conditions, repair needs, and recommended solutions clearly to customers, • Perform preventive maintenance to improve equipment reliability and efficiency, • Travel to customer locations throughout Louisville and the surrounding service area, • Coordinate with dispatch and communicate schedule changes or delays promptly, • Document service calls, repairs, and resolutions accurately using company software, • Participate in a rotating emergency on-call schedule, including nights and weekends, • Maintain a clean and safe work area, company vehicle, tools, and assigned equipment, • Build positive working relationships with customers, leadership, and teammates, • Participate in company- and vendor-provided training You May Be a Great Fit If You • Have three to five years of commercial or industrial HVAC service and repair experience, • Understand commercial HVAC, refrigeration, electrical, mechanical, and controls systems, • Are comfortable servicing chillers, boilers, rooftop units, split systems, and heat pumps, • Diagnose equipment problems accurately and develop practical, effective solutions, • Communicate clearly, consistently, and professionally with customers, dispatch, leadership, and teammates, • Build trust through technical expertise, sound judgment, and dependable follow-through, • Work independently while remaining connected and accountable to the team, • Take ownership of your schedule, documentation, vehicle, tools, and customer commitments, • Take pride in completing safe, accurate, high-quality work, • Remain calm and dependable when responding to urgent customer needs, • Hold a Universal EPA Section 608 certification, • Hold a valid Kentucky Journeyman HVAC Mechanic license, • Have completed an accredited HVAC technical or trade-school program, • Have a high school diploma or equivalent, • Hold a valid driver’s license with an acceptable driving record About Perfection Group We believe a well-managed facility can transform our world. Perfection Group designs, builds, and improves facility comfort, efficiency, and health for commercial and industrial customers. We combine personalized, high-quality service with advanced HVAC and facilities-management technology. If you’re an experienced commercial HVAC technician looking for challenging work, respected customers, and opportunities to continue growing, we’d like to meet you. \nCompany Description Perfection Group, founded in 1951, is the industry leader that designs, installs and services mechanical equipment and environmental equipment focusing on energy efficient facility operations for commercial, industrial and institutional customers. From the basement of his parents' home, Jack Albrecht, Chairman, watches has dad build a business by replacing coal fired furnaces. Now, directed by third generation leadership, Perfection Group continues to grow its "Everything, Everywhere" concept across its footprint. Perfection has steadily grown and evolved in the past 75 plus years. Today, Perfection is a facility solutions provider servicing the Cincinnati, Dayton, Columbus, Indianapolis, Louisville, Lexington, Charleston, Knoxville, Nashville, Chattanooga and areas in between. Perfection Group, founded in 1951, is the industry leader that designs, installs and services mechanical equipment and environmental equipment focusing on energy efficient facility operations for commercial, industrial and institutional customers. \r\n\r\nFrom the basement of his parents' home, Jack Albrecht, Chairman, watches has dad build a business by replacing coal fired furnaces. Now, directed by third generation leadership, Perfection Group continues to grow its "Everything, Everywhere" concept across its footprint. Perfection has steadily grown and evolved in the past 75 plus years. Today, Perfection is a facility solutions provider servicing the Cincinnati, Dayton, Columbus, Indianapolis, Louisville, Lexington, Charleston, Knoxville, Nashville, Chattanooga and areas in between.

Work at a BRAND NEW state of the art facility, and receive the following benefits from day one: Relocation Assistance offered • Base Salary + Form of OT & Annual Bonus, • Work independently, with lots of variety in your day, • Discretionary paid time off with Manager approval, • Education Assistance Program, • Medical, Dental, Vision, and 401k Matching I. Job Summary Manage the Landfill Gas to Renewable Natural Gas "RNG" Facility to maximize production, while ensuring safe work practices, environmental compliance, timely maintenance, compliance with contracts, and coordination with the landfill management and operations. This role acts as a plant owner and is available whenever necessary to meet the objectives of the role and the needs of the facility. An RNG Facility takes landfill gas and converts it to a Natural Gas Quality that is injected into the pipeline for household and commercial use. The RNG Plant Manager will be required to operate and maintain equipment such as, specialty gas processing equipment, gas compressors, and H2S removal systems, Nitrogen Removal Unit, and Pressure Swing Absorber. II. Essential Duties and Responsibilities • The operator will perform intermediate to advanced level Instrument and Control repair, maintenance, calibration, and troubleshooting., • Capture data and evaluate course of action for optimized plant performance, while operating within identified budgets. This position also has strict requirements for safety and environmental compliance along with standard operating procedures., • Must be an engaged employee with the ability to organize and manage small to large scale plant outages and projects, with attention to detail of organizational and record keeping of all maintenance reports, gas data analysis and waste stream documentation., • Operate advanced instrumentation and process control systems., • Leads, manages, and coordinates all 3rd party vendors or customers for scheduled plant maintenance, unscheduled down time, compliance, and well-field issues., • Regularly communicates this with the Market Area Gas Operations Manager (MAGOM) and/or WMRE Operations Manager., • Inspects plant machinery and equipment. Repairs, maintains, and services all equipment in accordance with the facility Standard Operating Procedures, equipment maintenance manuals, and WMRE policies and training. Must also be knowledgeable to handle non-routine repairs or issues that may arise and require sound, immediate judgment without direct supervision., • Implements WM and WMRE safety policies and practices for all work activities, and ensures these practices are followed by other WM staff, vendors, contractors, and visitors entering the facility., • Completes all mandatory training activities for both safety and operational training as assigned by supervisor., • Procures plant supplies and replacement equipment in an efficient manner by identifying needs in advance, managing vendors, and working within WMRE guidelines as well as being responsible for the annual budget., • Promptly responds to call-outs of plant shutdowns during non-business hours to identify the cause of the shutdown and rectify/diagnose through appropriate repairs or adjustments to return the plant to operation while consulting with WMRE operations managers (as needed). This role is given discretion to judge the situation and respond accordingly without management intervention, until needed., • Maintains the facility spare inventory and provides a written inventory count twice annually., • Completes special assignments/tasks as required by WMRE Operations Manager, Market Area Gas Operations Manager, or Landfill District Manager., • Able to work as a team and communicate clearly and professionally across different business units., • Ability to wear/operate assigned PPE and follow WM and WM Renewable Energy safety protocols and procedures., • Work on electrical systems, DC and AC low voltage, to troubleshoot and perform minor repairs., • Must be strong with basic computer skills used to communicate, document, and change operations settings for plant performance optimization. III. Qualifications The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience Education: High School Diploma or GED (accredited) required. Experience: 5 years of relevant work experience in a plant operations or plant maintenance environment required. B. Certificates, Licenses, Registrations or Other Requirements Administrative Services\DL NUMBER - Driver License, Valid and in State required C. Other Knowledge, Skills or Abilities Required Fundamental knowledge of computer data entry and interpretation. Must be able to successfully manage fiduciary responsibilities. Must be able to lift a minimum of 100 lbs. Must be able to travel up to 15% with overnight stays. Must be able to diagnose and repair DC circuits 12/24 volts. Basic knowledge of 120/240/480 3ph volt AC circuits. Must be able to understand complex processes and action-based thinking. Must be familiar with basic principles of building maintenance. Must be able to demonstrate industry communication skills. Preferred: • Previous RNG Operations, • Gas processing or pipeline operations experience, • Gas compression and gas conditioning, • Controls and programming, • Landfill gas collections, • Automotive or Heavy Equipment technician, • Refrigeration or HVAC experience, • Skilled in P&ID or electrical drawing interpretation, • Project management experience IV. Work Environment Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. Please note, this is a salaried position that is eligible for a form of overtime. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site.

Job Description Are you looking for an opportunity and growth in your hospitality career? Look no further! Here at Tupelo Honey, we believe "The happiest bees make the best honey" and we are ready to hire team members with a passion to serve our community and foster the brand we love so much. We feel passionate about offering a diverse array of benefits to meet our team members’ needs throughout every age and stage of employment. HONEY POT BENEFITS • Employee and family health care offerings for Full Time Team Members, • Wellness and Tuition Reimbursements, • Accrual of Paid Time Off, • Paid Parental Leave, • Life, Dental, and Disability benefit options, • Fast-growth company with advancement opportunities ESSENTIAL DUTIES AND RESPONSIBILITIES: • Must have at least a working knowledge, if not expertise, of all line stations., • Execute all directives of management throughout all shifts., • Prepare a variety of meats, seafood, poultry, vegetables and other food items for cooking in broilers, ovens, grills, fryers and a variety of other kitchen equipment., • Know and comply consistently with our standard portion sizes, cooking methods, quality standards and kitchen rules, policies and procedures., • Responsible for having a working knowledge of all our recipes., • Maintain a clean and sanitary work station area including tables, shelves, grills, broilers, fryers, pasta cookers, sauté burners, convection oven, flat top range and refrigeration equipment., • Follow proper plate presentation and garnish set up for all dishes., • Assist in food prep assignments during off-peak periods as needed., • Open and close the kitchen properly and follow the checklists for kitchen stations. Assist others in opening and closing the kitchen. Clean station and get checked out by a manager before clocking out. QUALIFICATIONS • Previous restaurant experience preferred, but not required., • A minimum of 1 year of experience in kitchen preparation and cooking., • At least 6 months experience in a similar capacity., • Must be able to communicate clearly with managers, kitchen and dining room personnel., • Be able to reach, bend, stoop and frequently lift up to 40 pounds., • Be able to work in a standing position for long periods of time (up to 9 hours). REQUIREMENTS • Be able to work in a standing position for long periods of time., • Be able to reach, bend, stoop and frequently lift up to 50 pounds., • Must be able to communicate clearly with managers, kitchen and dining room personnel., • Must have schedule flexibility to cover all meal periods as needed., • Must be able to move and process information quickly.

Job DescriptionDescription: POSITION SUMMARY Performs skilled technical work in the maintenance, repair, replacement, and installation of heating, air conditioning and refrigeration equipment, controls and distribution systems. GENERAL RESPONSIBILTIES • Installs, troubleshoots and repairs heating, air conditioning and refrigeration units, including chillers, boilers and heat pumps., • Troubleshoots malfunctioning heating, air conditioning and refrigeration systems to determine the cause of the malfunction., • Performs scheduled maintenance inspections, and adjusts, cleans and calibrates various systems to assure proper system operations., • Repairs wiring and electronic components associated with automated building management systems., • Replaces expansion valves, compressors, motors, coil units and other component parts., • Cleans refrigerant systems from hermetic burnouts, evacuates, and charges systems., • Troubleshoots and repairs direct digital and pneumatic control systems., • Checks distribution systems for proper velocity, volume, temperature, pressure, etc., • Determines cause of and corrects condensation problems., • Provides technical assistance with the design of HVAC systems including installations and modifications to existing systems., • Prepares records and reports describing procedures, actions taken and recommended solutions, • Prepares and submits requests for supplies and equipment., • Responds to emergency service requests., • Performs routine and preventive maintenance as needed for the purpose of ensuring the ongoing functioning of HVAC systems., • Knowledge of pertinent rules and regulations, guidelines, safety orders, departmental operating procedures and safety regulations sufficient to insure that work is performed in compliance with applicable law., • Enforces sound safety and housekeeping practices., • Follows safety rules/procedures; avoid known hazards in the work environment., • Reviews safety procedures before beginning each job with known hazards., • Safety first. Places avoidance of injury or property damage above all other job requirements., • Follows established safety procedures., • Ensure compliance of all work related activities in a fair, ethical and consistent manner., • Assure safety standards are used which comply with all company, local, City, State and Federal guidelines., • Maintain a professional courteous manner with all tenants, vendors, contractors and fellow employees., • Other duties may be assigned. WORKING CONDITIONS AND ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Some exposure to potentially harmful chemicals or materials may occur. Requirements: QUALIFICATIONS & EDUCATION To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • High School diploma or GED, • HVAC certified., • 3 years related experience or training; or equivalent combination of education and experience., • Must have your own basic tools – drill, flashlight, screwdriver, hammer, tool set/sockets, etc. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Tasks involve the ability to exert heavy physical effort and heavy work, including climbing, balancing, stooping, kneeling, crouching and crawling and lifting, carrying, pushing, and/or pulling of moderately heavy objects and materials weighing 20 to 50 pounds; may occasionally involve heavier objects and materials weighing up to 100 pounds, • Tasks are regularly performed with potential expose to adverse environmental conditions such as strong odors, fumes, dust, wetness, humidity, machinery, vibrations, temperature and moist extremes, disease, pathogenic substances and toxic/poisonous agents., • While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk and sit., • The employee is occasionally required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl.

Job Description HVACR Technician Tech24 Location: Louisville, KY and surrounding markets Compensation Range: $30- $50 per hour, based on experience Up to $5,000 sign-on bonus for qualified candidates Why Join Tech24? At Tech24, we invest in our technicians so you can focus on what you do best. Here’s what you can expect when you join our team: • Weekly Pay – Reliable pay, every week, • Fully Equipped for Success – Company vehicle, gas card, uniforms, and phone provided, • Work-Life Balance – Generous paid time off, paid holidays, and a paid day off on your birthday, • Comprehensive Benefits – Medical, dental, vision, and short-term disability coverage (effective 1st of the month following your date of hire), • Company-Paid Protection – Long-term disability and basic life insurance at no cost to you, • Comprehensive Training Opportunities– Advance your skills through manufacturer certified programs, company training, or a blend of both., • Retirement Planning Made Easy – 401(k) with company match and immediate vesting, • Employee Assistance Program (EAP) – Free, confidential counseling and support for you and your family, including financial and legal resources About the Center Tech24 in Kentucky is proudly led by former technicians with a heavy emphasis on quality of life for our technicians and doing the right thing for our customers. We are looking for experienced Commercial HVAC/Refrigeration Technicians in our Louisville market. Position Summary As part of the Tech24 team, the HVACR technician plays a critical role in minimizing equipment downtime and ensuring customers' operations run efficiently and safely. The ideal candidate is self-motivated, dependable, and comfortable working independently while representing the company with professionalism and integrity. This role requires strong technical expertise, attention to detail, and a commitment to delivering exceptional customer service in the field. Key Responsibilities • Diagnose, troubleshoot, and repair commercial HVAC and refrigeration equipment including walk-in coolers/freezers, reach-ins, ice machines, rooftop units, split systems, and exhaust/make-up air systems, • Perform preventative maintenance to ensure optimal equipment performance and longevity, • Install, replace, and commission HVAC and refrigeration systems as needed, • Accurately document service calls, parts used, labor hours, and customer interactions in company system, • Communicate clearly with customers regarding equipment issues, repair recommendations, and preventative maintenance plans, • Maintain EPA compliance and adhere to all local, state and federal safety regulations, • Manage truck inventory to ensure proper parts and tools are stocked, • Respond to emergency service calls in a timely and professional manner, • Represent the company with professionalism while delivering high-quality customer service, • Participate in ongoing technical training and professional development opportunities Qualifications • 3+ years of experience in commercial HVAC and refrigeration service (preferred), • EPA Certification and Kentucky Journeymen license required, • Strong knowledge of refrigeration systems, electrical diagnostics, airflow systems, and mechanical troubleshooting, • Experience working on commercial kitchen equipment is a plus, • Ability to read and interpret technical manuals, wiring diagrams, and blueprints, • Valid drivers license with a clean driving record required, • Strong problem-solving skills and ability to work independently, • Excellent communication and customer service skills, • Ability to lift up to 50+ lbs. and work in varying indoor / outdoor conditions, • Ability to climb ladders, work from heights, and crawl in tight quarters, • Own industry standard hand tools (preferred), • Willingness to participate in an on-call rotation as needed Compensation Transparency The advertised pay range for this position is $30-$50 per hour. Final compensation will be determined based on factors such as experience level, technical certifications, skill set, and overall qualifications. Candidates with advanced commercial HVAC and refrigeration experience, manufacture certifications, or specialized expertise may be considered at the higher end of the range. Tech24 is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other federally protected class. For more information about Tech24 and our career opportunities visit https://www.mytech24.com/careers/

Job Description AVI Foodsystems is looking for a friendly and hard-working team member to fill the role of Customer Service Attendant. This is a seasonal position only. The schedules for is are Monday - Friday 9pm-5am and Wednesday - Sunday 9pm-5am. Founded in 1960, AVI Foodsystems has evolved into one of the most respected and trusted food service companies in the nation. Providing comprehensive food services with a focus on the highest quality and freshest ingredients, impeccable service and total value is the reputation we have earned and live up to everyday. Duties & Responsibilities: • Receive delivery of items such as soft drinks, bakery products, snack items and specialty foods at client locations, • Fill vending machines to proper inventory levels with items such as soft drinks, pastries and packaged foods, • Place stock on shelves or racks in vending machines or coolers, • Ensure the refrigeration of all cold food products, • Oversee the ordering of merchandise and control inventory, • Collect unsold and stale merchandise, • Collect money, including coins and bills, from machines, • Communicate positively with customers by making eye contact and smiling, • Perform routine maintenance and sanitation of machines, • Maintain clean vending areas Requirements: • Outgoing personality with the skills to promote products, • Ability to work both independently and as part of a team, • Excellent organization and time management skills, • Ability to speak effectively to customers and employees, • Ability to perform calculations in all units of measure, using whole numbers, common fractions, and decimals Benefits: • A family culture and atmosphere, • Competitive compensation, • Free meals and snacks/beverages, • Immense training and growth opportunities We conduct pre-employment drug testing. EOE

About Midea America Corp Midea America Corp., is one of the world’s largest home appliance brands, offering the most comprehensive selection of products in the world to fully serve the needs of day-to-day living at home, at work, or anywhere else you go. In North America we strive to aim high, put the customer first, transform and innovate the marketplace, utilizing our commitment, dedication, inclusion, and partnership with our teams. Midea America is a subsidiary of the Midea Group, a global company with over 150,000 employees and operations in more than 195 countries. As a publicly listed company, we are ranked #231 as a Fortune Global 500 company and offer one of the most comprehensive product portfolios in the industry. Job Summary Midea America is seeking a highly motivated Consumer Insights Specialist to help drive the future of refrigeration appliance innovation across refrigerators, freezers, wine & beverage coolers, countertop icemakers, and emerging refrigeration technologies. This role is responsible for uncovering deep consumer insights, identifying unmet needs, monitoring market trends, evaluating competitive landscapes, and translating Voice of Customer (VOC) findings into actionable product and business opportunities. The successful candidate will leverage qualitative and quantitative research methodologies to influence product strategy, innovation roadmaps, user experience improvements, and commercialization decisions. Working closely with Product Management, Engineering, Industrial Design, Marketing, Sales, and Global R&D teams, this position will serve as the consumer advocate throughout the product development process, ensuring that future products address real consumer needs while creating competitive differentiation in the North American market. This position is full-time and fully on-site. Some domestic and occasional international travel is required. Essential Job Responsibilities Consumer Insights & Research • Lead qualitative and quantitative consumer research projects to understand consumer behaviors, needs, pain points, and usage habits related to refrigerator and freezer appliances., • Design and execute surveys, focus groups, in-home visits, interviews, ethnographic studies, usability testing, and concept validation research., • Translate Voice of Customer (VOC) findings into actionable product, marketing, and business recommendations., • Develop consumer personas, customer journey maps, and usage scenarios to support consumer-driven product development. Market Research & Competitive Intelligence • Research market trends, consumer preferences, emerging technologies, and competitive activities within the refrigeration appliance industry., • Conduct competitive benchmarking and analyze product features, pricing, consumer reviews, marketing strategies, and user experiences., • Identify market gaps, growth opportunities, and unmet consumer needs that can drive future product innovation and portfolio expansion. Product Innovation Support • Partner with Product Management, Engineering, and Industrial Design teams to identify innovation opportunities and validate new product concepts., • Support Front-End Innovation (FEI) activities through consumer validation of product concepts, features, and user experiences., • Translate research findings into product requirements and consumer-driven design recommendations., • Participate in product roadmap planning by providing consumer and market insights. Data Analytics & Business Insights • Analyze consumer, market, and competitive data to identify trends, opportunities, and strategic recommendations., • Develop reports, dashboards, presentations, and executive summaries that communicate key findings and business implications., • Establish best practices for collecting, storing, managing, and sharing consumer and market intelligence across the organization., • Support data-driven decision making through analytical rigor and consumer-focused recommendations. Cross-Functional Collaboration • Work closely with Product Management, Marketing, Sales, Engineering, Design, and Global R&D teams to ensure consumer insights are integrated throughout the product development process., • Support product launches through consumer validation research, messaging feedback, and market readiness assessments., • Review and validate consumer-facing materials, including product literature, websites, packaging, user manuals, and promotional content., • Travel domestically and internationally to collaborate with global and multicultural teams, driving alignment on consumer insights, product innovation, and strategic business objectives. Qualifications • Bachelor's degree in Marketing, Psychology, Sociology, Business, Human Factors, Product Innovation, or a related field. Master's degree preferred., • 6+ years of experience in Consumer Insights, Market Research, Customer Experience, Product Innovation Research, or related fields. Prior experience with consumer insights firm is a plus., • Experience within the home appliance, consumer products, durable goods, or kitchen appliance industries preferred., • Experience supporting product development and Front-End-Innovation programs through consumer research, market analysis, UI/UX research, ethnography studies, customer journey mapping, design thinking, jobs to be done methodologies, etc., • Strong expertise in qualitative and quantitative research methodologies with proficiency in survey design, focus groups, interviews, consumer analytics, and statistical analysis., • Ability to transform complex data into clear and actionable business recommendations., • Strong communication, storytelling, presentation, and stakeholder management skills., • Proven ability to collaborate effectively with cross-functional and global teams., • Self-motivated, curious, analytical, and consumer focused., • Strong project management and organizational skills. Disclaimer This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement We are an equal opportunity employer and value diversity. All employment is decided based on qualifications, merit, and business need.

This position is a core FEI (Front End Innovation) + AD (Advanced Development) innovation role, completely distinct from mass production PDM iterative implementation work. It focuses on cross-category new small appliance products, cross-technology integration innovation, and tackling unknown scenario pain points, emphasizing scenario-driven early-stage development rather than limiting to existing product iterations. The core responsibility is the 0-to-1 incubation of disruptive products for the next 1-3 years, solving industry pain points such as traditional product function rigidity, category homogeneity, and limited usage scenarios through real user life scenario analysis, competitive landscape forecasting, cutting-edge technology integration, and multiple prototype validations. It aims to overcome technical uncertainties in advance, build exclusive brand technology and scenario barriers, and support the company’s differentiated and breakthrough product innovation strategy. Main Responsibilities • Scenario Pain Point Exploration and New Category Definition (Core): Based on scenario innovation logic, deeply analyze the full user journey of small appliance usage, identify functional limitations, category gaps, and hidden pain points of traditional products. Combine market competitive landscape and user consumption trends to produce scenario insight reports, break traditional category boundaries, define cross-category innovative new categories, new functions, and new experience opportunities, and complete early category strategic layout., • FEI Front-End Innovation Solution Incubation: Lead the full process of front-end innovation from 0 to 1, including creative brainstorming, scenario modeling, product positioning refinement, core value extraction, differentiation positioning, clarifying product core competitive advantages, delivering complete new product concept solutions and scenario-based product definition documents, and building the company’s innovation product reserve pool to provide core basis for subsequent project initiation., • AD Advanced Engineering Research and Technical Challenges: Conduct advanced research on cross-technology integration, new interaction technologies, and other cutting-edge technologies. Independently complete prototype building, preliminary CBOM sorting, and technical feasibility verification; anticipate mass production risks and cost ranges in advance; solve the core issue of “concept feasibility but difficult implementation” in innovation projects; overcome early-stage technical uncertainties and clear all technical obstacles for mass production development., • Scenario-Driven Reverse Product Definition: Different from traditional parameter-driven development, use the user’s final usage scenario and experience outcome as the sole criterion to reverse-define product performance indicators, structural design, configuration, logic, functional programs, and interaction experience standards. Build a complete innovation closed loop of “scenario pain points → user needs → technical solutions → product implementation → ultimate experience” to create differentiated innovative products., • Prototype Iteration and Scenario-Based Testing Verification: Lead innovative prototype model building, multiple iterations, real scenario testing, and small user group testing; optimize and refine core aspects such as product feel, efficiency, capacity, and operation experience; verify the authenticity, practicality, and differentiation advantages of innovation selling points; select the best product configuration plan to ensure new product experience far exceeds industry competitors., • Cross-Department Innovation Collaboration and Project Handover: Coordinate with user insights, industrial design, engineering R&D, marketing, and supply chain teams; synchronize front-end innovation results and test data; transform scenario-based innovation solutions and mature technical solutions into standardized product requirements; seamlessly connect with mass production development teams to complete the full chain handover from front-end innovation to mass production implementation., • Competitive Benchmarking and Industry Iteration Tracking: Continuously deepen research in the small appliance consumer goods sector; benchmark global mainstream competitors’ cost, timeliness, capacity, core technologies, and user experience; review competitors’ advantages and disadvantages; combine industry technology iteration trends to produce forward-looking analysis reports; continuously explore category innovation gaps; support the company’s long-term product strategy upgrade., • Innovation Project Review and Methodology Consolidation: Manage progress control, risk forecasting, and problem-solving of uncertain innovation projects; flexibly adjust plans according to industry environment and project challenges; conduct rapid trial and error and efficient iteration; complete full-process innovation project reviews; standardize scenario-driven innovation, advanced research, and prototype verification methodologies; consolidate company innovation technology assets. Qualifications Work Experience: Over 6 years of experience in FEI front-end innovation, AD advanced engineering research, and 0-to-1 disruptive product incubation in the home and small appliance consumer product industry; experienced in scenario-driven cross-category product innovation, prototype iteration, technical challenges, and competitive differentiation benchmarking; familiarity with small appliance structural innovation preferred; extra points for experience in cross-category innovation projects in export kitchen heating appliances. • Education: Bachelor’s degree or above in Industrial Design, Mechanical Engineering, Product Design, Electronic Engineering, Consumer Behavior, Product Innovation, or related fields, with solid engineering principles and product innovation knowledge., • Core Competencies: Top-level ability in scenario analysis and hidden pain point excavation; capable of breaking traditional category thinking and independently defining new categories and new scenario innovations; proficient in advanced engineering research, prototype building, and technical feasibility verification methods; skilled in solving uncertain technical challenges in innovation projects., • Innovation Ability: Strong differentiated innovation thinking; not limited to product iteration optimization; adept at creating cross-category disruptive products from 0 to 1; able to independently refine innovation plans, benchmark competitors, and extract core values; possess complete front-end innovation project implementation results., • Industry Insight: Deep understanding of small appliance product sector innovation logic; expert in scenario-driven development versus traditional parameter-driven development; familiar with mainstream industry competitor technologies, costs, experience shortcomings; accurately capture market innovation gaps., • Comprehensive Qualities: Strong stress resistance and rapid iteration thinking; adaptable to uncertainty, dynamic demand adjustments, and sudden technical challenge resolution in innovation projects; excellent cross-department collaboration, logical structuring, and senior-level reporting skills; capable of independently delivering innovation plans and strategic recommendations., • Plus Points: Experience in pioneer development of small appliance refrigeration/heating/blending products and cross-category innovation; possession of product innovation patents and innovation project awards; proficient in prototype development, scenario testing, and user experience verification processes.

Job Description Your day at a glance Clock in ready to go at 6:00 AM. From there, you’ll move between benches assembling HVAC and refrigeration subassemblies, referencing blueprints, and documenting each build. You’ll solder copper tubing, calibrate test stands, and diagnose any issues you spot along the way. The rhythm is steady and satisfying—building real equipment that powers technical education across the country. • Mon–Thu: 6:00 AM – 3:30 PM, • Fri: 6:00 AM – 2:30 PM, • Optional OT Saturdays: 6–10 AM Role responsibilities, • Assemble HVAC/R systems, modules, and components to spec, • Solder copper tubing with precision and consistency, • Interpret blueprints and technical specifications to build to standard, • Troubleshoot component- and equipment-level issues, • Calibrate and maintain production and test equipment, • Create and update build procedure documentation Skills and background, • High school diploma or equivalent, • Demonstrated mechanical aptitude, • Ability to read blueprints and English-language technical specs, • Self-directed; productive working independently, • Dependable—on the floor and ready at 6:00 AM, • Copper soldering experience preferred, • EPA Section 608 certification is a plus Compensation, perks, and growth Signing Bonus: $1,000 total — paid in $250 installments at your 3-month, 6-month, 9-month, and 1-year anniversaries. • Medical, dental, and vision at affordable rates, • Company-paid life insurance and short-term disability, • 7 paid holidays, • 120 hours (3 weeks) PTO your first year, growing to 5 weeks, • Free access to a full eLearning library (Ivy Tech-equivalent courses), • Climate-controlled facility, • Clear advancement path—build skills, build pay About Amatrol Family-owned since 1981, Amatrol designs and builds hands-on training systems used by colleges, high schools, and industry to teach real technical skills. Here, you’re known by name. Expect team lunches, ice cream days, a Christmas luncheon, and coworkers who enjoy collaborating. How to apply Please submit a current, chronological resume showing complete work history to be considered. We are not engaging external recruiters or staffing agencies for this role. Core proficiencies • HVAC, • Soldering, • HVAC Service & Installation, • Blueprint Reading Legal Amatrol, Inc. is an Equal Opportunity Employer. Contact HR for accommodation requests during the application process.

Job Description The Maintenance Technician will perform preventive maintenance for all manufacturing operations, along with troubleshooting and repairing machinery problems. Scheduled hours for this 2nd shift position are 2:30PM - 11:00PM. Job Responsibilities: • Perform routine maintenance on electro-mechanical equipment used in food and beverage production, including but not limited to conveyors, mixers, fillers, packaging machinery, and refrigeration systems., • Troubleshoot and diagnose electrical and mechanical issues with equipment to identify root causes of malfunctions and implement effective solutions., • Conduct repairs and replacements of defective parts or components using hand and power tools, precision measuring instruments, and diagnostic equipment., • Ensure that all equipment is properly cleaned, sanitized, and maintained in accordance with food safety standards and regulatory requirements., • Collaborate with production and quality assurance teams to minimize downtime and optimize equipment performance while maintaining product quality and safety., • Assist in the installation and commissioning of new equipment and machinery, ensuring compliance with manufacturer specifications and safety guidelines., • Document all maintenance and repair activities, including work performed, parts used, and any other relevant information, in maintenance logs and records., • Adhere to safety protocols and procedures at all times to maintain a safe working environment for yourself and others., • Stay updated on industry developments, new technologies, and best practices in electro-mechanical systems maintenance and repair, with a focus on applications in the food and beverage industry.Skills, Knowledge & Abilities:, • Ability to read and understand electrical, pneumatic, and hydraulic schematics., • Ability to operate and diagnose automated production equipment by navigating the HMI., • Advanced knowledge involving: 480v, electrical controls, hydraulics, pneumatics., • PLC logic experience preferred., • Welding, fabricating, and machining experience preferred., • Ability to effectively communicate with other technicians, operators, and leadership to maintain a high level of cooperation among all departments., • Commitment to safety and compliance with all relevant regulations and standards, including OSHA, FDA, and GMP (Good Manufacturing Practices). Education & Experience:, • High School diploma or equivalent, Technical Certification in mechanical technology, preferred., • 2+ years of maintenance experience in manufacturing (food production preferred)., • Experience with CMMS programs used for preventative maintenance, work orders, and spare parts tracking., • Experience working with food-grade materials and equipment, with a solid understanding of food safety regulations and compliance requirements. Work Environment:, • Exposure to both the office setting and food manufacturing facility., • Significant amount of time on the manufacturing floor., • Must wear required PPE while in all manufacturing areas., • Moving parts and machinery are present in the plant. #ZR \nCompany Description Great Environment! Great Environment!

Job Description • We are hiring immediately for full time COLD FOOD (SALAD) positions., • Location: Humana Waterside - 101 East Main Street, Louisville, KY 40202. Note: online applications accepted only., • Schedule: Full time schedule. Days may vary; 6:00 am to 2:30 pm. Further details upon interview., • Requirement: Previous cooking experience required. *Internal Employee Referral Bonus Available • Pay Range: $18.00 per hour to $18.50 per hour. Free meals, uniforms and laundering service available at select locations. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1577630. The advertised program is an AI recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! What makes FLIK click? Our people. The decisions, actions and attitudes of our associates earn the trust and loyalty of our clients every day. We know how to pick them and we know how to grow them. It starts with hiring people who share our passion for food and hospitality. Once we find the right talent, we encourage, value and recognize their contributions. We keep our people renewed, excited and engaged by providing hands-on training and educating them about the latest trends. We give them a stake in successfully raising the bar. Our people love what they do and they love sharing their passion. Join our team and see the FLIK difference. Where a job isn’t merely a job but the start of a career where you can flourish. Job Summary Summary: Cuts delicatessen meats, vegetables and cheeses with slicing machine, knives or other cutters. Prepares and serves sandwiches, salads and other cold food items. Essential Duties and Responsibilities: • Obtains daily production schedule and preparation requirements from Chef., • Prepares sandwich meats, cheeses, condiments and salads using approved production standards to ensure proper quality, serving temperatures and standard portion control., • Stocks and replenishes deli/cold products and condiments following approved merchandising guidelines., • Carries pans, kettles and trays of food to and from workstation, stove and refrigerator., • Stores food in designated areas following HACCP standard wrapping, dating and rotation procedures., • Cleans, sanitizes and maintains counters, work surfaces, refrigeration units and floors in the preparation and serving areas., • Places meat, cheese or vegetables on cutting board and cuts slices to designated thickness. Positions and clamps meat or cheese on carriage of slicing machine. Adjusts knob to set machine for desired thickness. Presses button to start motor that moves carriage past rotary blade that slices meats and cheeses., • Interacts with coworkers to ensure compliance with company service standards, inventory and cash control procedures., • Maintains clean, safe work environment to comply with sanitation, ServSafe and safety requirements., • Performs other duties as assigned. Associates at FLIK are offered many fantastic benefits. Both full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyFlikHospitality.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Flik maintains a drug-free workplace.

Kept Companies is the largest self-performing commercial cleaning and maintenance company in the nation. With nine leading brands and over 100 locations nationwide servicing industries including restaurant, solar, retail, transportation, and supermarket. Kept Companies is the leading provider of commercial fleet washing, retail equipment refurbishing and sales, refrigeration, hood, coil and solar panel cleaning, and parking lot services. This position is responsible for performing pressure washing and industrial cleaning services for commercial properties, fleets, sidewalks, buildings, and equipment. Duties include cleaning kitchen exhaust hood systems, assisting with pavement marking and line striping projects, operating and maintaining specialized trucks and field service equipment, and loading, transporting, and unloading materials to and from job sites. The role requires adherence to strict safety procedures, troubleshooting basic equipment issues, and working efficiently in outdoor environments under varying weather conditions while delivering high-quality service to clients. Operate trucks & professional equipment. Load/unload materials. Perform pressure washing on buildings, sidewalks, vehicles, and equipment. Clean commercial kitchen exhaust hoods and related systems. Assist with pavement marking and line striping projects. Operate and maintain pressure washing, striping, and field service equipment. Troubleshoot basic mechanical issues with tools and equipment. Load, transport, and unload materials at job sites. Follow safety procedures and company guidelines at all times. Work outdoors in varying weather conditions and environments. Other related duties and responsibilities as assigned. Ability to travel from one site to another as required. Valid driver's license required with a clean driving record. Dependable, punctual, and able to manage time efficiently Highschool diploma or GED preferred. Prior pressure washing or similar field service experience is a plus Ability to lift 5070 pounds and perform physical labor Due to the nature of our business, you may be required to work extended or unusual work hours when necessary and in case of emergency, including holidays and weekends. Must be at least 21 years old to qualify. Must pass a background check and motor vehicle record check. Health Insurance Dental Insurance Vision Insurance PTO Paid Holidays 401K We are an Equal Employment Opportunity Employer and do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Oak View Group is the global leader in venue development, management, and premium hospitality services for the live event industry. Offering an unmatched, 360-degree solution set for a collection of world-class owned venues and a client roster that includes the most influential, highest attended arenas, convention centers, music festivals, performing arts centers, and cultural institutions on the planet. The Warehouse Worker is responsible for assisting in venue distribution/warehouse operations including inventory, receiving, transfers, and clean up after the event. This is a key position for the effective and profitable operation of the business. The employee must maintain excellent attendance and be available to work a variable event-driven schedule which includes evenings and weekends. Open availability, professional presentation, outstanding interpersonal skills, self-direction and independent decision-making skills are required. Applicant must have their Food Handlers Card/Certification and their Alcohol Handlers Card/Certification. This role pays an hourly rate of $15 to $17. Benefits for PT roles: 401(k) savings plan and 401(k) matching. EVERGREEN ROLE: Applications are accepted on an ongoing basis; there is no application deadline. • Receiving and distribution/transfer controls for the venue., • Maintain sanitation and organizational systems of all warehouse storage areas., • Fulfills all event expectations including to but not limited to requisitioning during events, post-event break down, warehouse returns, equipment storage, sanitation and maintenance., • Oversee and ensure that appropriate stocking levels are met for each event; rotate and maintain integrity of product. (FIFO), • Ensure proper transfer process of product between locations, including follow-up documentation., • Assists in performing routine maintenance; responsible for concession and utility equipment cleaning and maintenance: portable equipment, burden carriers, carts, floors, refrigeration, and lighting. Ensure manifested equipment is in location., • Must maintain excellent attendance and punctuality., • Follows directions given by the Manager or Supervisor. Knowledge, Skills and Abilities: • Ability to communicate with employees, co-workers, volunteers, management staff and guests in a clear, professional and courteous manner which fosters a positive, enthusiastic and cooperative work environment., • Ability to make sound business/operations decisions (i.e. regarding technical, product or equipment challenges during an event) quickly and under pressure., • Ability to speak, read, and write in English., • Ability to work well in a team-oriented, fast-paced, event-driven environment., • Possess a thorough working knowledge of all existing concessions locations: geographical location, equipment, evacuation procedures, adjacent employee and guest areas, and facility access., • Possess valid Food Handlers certificate and Alcohol Service Permit if required by Provincial or local government., • Possess thorough working knowledge of all applicable sanitation requirements, food preparation guidelines, alcohol service policies, safety standards, etc. pertaining to venue concession operations., • Ability to calculate basic math functions (addition, subtraction, multiplication, division, percentages) as they relate to product inventory. Ability to consistently adhere to the highest standards of integrity, professionalism, ethics and confidentiality • High School diploma or equivalent., • Minimum 1 years foodservice/hospitality experience; similar venue experience a plus., • Food Service Certification/Alcohol Handlers Certification Physical Dimensions: Performing the duties of this position involves extensive and continuous standing and walking. Routine activities require the employee to be able to reach with hands and arms, sit, walk, stoop, kneel, crouch and crawl. The employee is frequently required to lift up to 50 pounds. The vision requirements include the ability to adjust focus, peripheral vision and close vision. Working Conditions & Hazards • Exposed to weather and non-weather related cold temperatures;, • In areas with low levels of CO exposure;, • Wet and slippery floors;, • Extreme hot surfaces;, • Pinch points and tight working spaces throughout building;, • Exposed to high noise levels. At OVG, we understand that to continue positively disrupting the sports and live entertainment industry, we need a diverse team to help us do it. We also believe that inclusivity drives innovation, strengthens our people, improves our service, and raises our excellence. Our success is rooted in creating environments that reflect and celebrate the diverse communities in which we operate and serve, and this is the reason we are committed to amplifying voices from all different backgrounds. Oak View Group is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis ("protected class") including, but not limited to veteran status, uniform service member status, race, color, religion, sex, national origin, age, physical or mental disability, genetic information or any other protected class under federal, state, or local law.

Job Description POSITION: Maintenance Team Member REPORTS TO: Maintenance Team Leader COMPENSATION: Hourly Rate, plus Benefits and Bonus eligibility LOCATION: Jefferson Landing - 1014 Jefferson Vw Wy, Louisville, KY 40219 SUMMARY The Maintenance Team Member is primarily responsible for protecting, maintaining, and enhancing the value of the community while also maximizing the living experience for residents and the community. This is accomplished by ensuring that all resident maintenance issues are resolved expertly and efficiently. RESPONSIBILITIES (Including but not limited to) • Maintains the facility and grounds based on community objectives., • Followpractices for the safe operation, maintenance, and repair of all facility equipment, including compliance with health, safety, and OSHA programs, policies, procedures, and reports., • Responds to work orders promptly, including after-hours on-call maintenance requests. Participates in the on-call rotation with the rest of the Maintenance Team., • Assists with the inspection of public areas and resident apartments to ensure proper maintenance and standards are achieved and sustained., • Follow Solidago, city, state, federal, and EPA air conditioning and refrigeration record-keeping requirements and procedures, are met as to the maintenance, service, repair, and disposal of air conditioning and refrigeration equipment and refrigerant., • Follow health department, city, state, and federal procedures, practices, and record-keeping requirements applicable to pools and spas are followed to maintain proper water chemistry and sanitation., • Keep storage areas, tools, and equipment secure at all times., • Participates in Solidago training as required. QUALIFICATIONS • 3-5 years of relevant maintenance experience., • Must have excellent customer service skills, attention to detail, and basic maintenance skills., • Working knowledge of pool service and maintenance is required., • High school diploma or GED equivalent preferred., • Must be able to lift a minimum of 75 lbs. and work 8-12 hour standing shifts., • Must be able to work weekends and be available for on-call emergencies., • Ability to embody the Solidago Standards BENEFITS • Medical, Dental, and Vision Insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • Paid Time Off (PTO), • Paid Holidays, • Dental, • 401k Retirement Plan, • Employee Assistance Program (EAP), • Competitive bonus structure, • Ancillary Benefits: Pet Insurance, Gym Membership Reimbursement, Parental Leave, etc. WORK ENVIRONMENT You are required to work both inside and outside of the office and in all areas of the residential property, including amenities, and have frequent exposure to outside elements where temperature, weather, odors, and landscape may be unpleasant and/or hazardous. PHYSICAL DEMANDS: To successfully perform the essential functions of this role, the team member must be able to engage in routine physical activities such as standing, walking, climbing, stooping, squatting, and using hands for typing and handling materials. The position requires the ability to access all areas of the property—both interior and exterior—in varying weather conditions, including rain, snow, heat, and wind.

Job Description Insomnia Cookies was founded in a college dorm room by then-student, Seth Berkowitz. Fast forward 20 years and so... many....cookies... later, our innovative bakery + delivery concept has become a cult brand known for its rabid following of cookie lovers who crave Insomnia’s warm, delicious delivery all day and late into the night. With an expanding footprint of over 350 stores globally, an experiential, “sweet-easy” flagship concept, and large scale operations and delivery capabilities ... Insomnia Cookies is revolutionizing the cookie game by truly "Imagining What’s Possible"! At Insomnia Cookies, our Shift Leaders are the leaders in action. As the person leading the shift, you'll work side-by-side with your Cookie Crew to deliver warm, delicious cookies and an exceptional guest experience. From baking and packing orders to coaching teammates and keeping the bakery running smoothly, you'll lead by example every shift. If you enjoy fast-paced environments, love working with people, and aren't afraid to roll up your sleeves, this is the role for you. WHAT YOU'LL DO: As the leader on duty, you will: • Lead bakery operations during your shift, ensuring an exceptional guest experience from start to finish., • Bake, package, and prepare orders while providing exceptional guest service., • Coach and motivate Cookie Crew members, providing direction, feedback, and support throughout the shift., • Prioritize and delegate tasks to keep operations running efficiently and meet guest demand., • Help maintain our standards for product quality, food safety, cleanliness, and speed of service., • Handle cash management, register accountability, and deposits., • Communicate important updates and partner with store leadership to keep the bakery operating at its best., • Jump in wherever needed to help your team succeed.QUALIFICATIONS, • 1+ year of experience in retail, restaurant, hospitality, or another customer-focused environment, • Strong communication, organization, and problem-solving skills, • Ability to thrive in a fast-paced, team-oriented environment, • Positive attitude with a passion for delivering exceptional guest experiences, • Must be 18 years of age or older, • Ability to obtain any required food safety certifications applicable to the location, • Ability to perform the essential functions of the position with or without reasonable accommodation. Physical Requirements This position regularly requires the ability to: • Stand and walk for extended periods of time (up to 8 hours per shift)., • Frequently reach, bend, stoop, twist, kneel, and lift., • Lift, carry, push, and pull up to 30 pounds regularly., • Occasionally lift up to 50 pounds with assistance., • Use hands and fingers to handle bakery equipment, food products, and a point-of-sale system., • Work in environments with varying temperatures, including around ovens, freezers, and refrigeration units., • Safely operate kitchen equipment in accordance with company procedures., • Read order screens, recipes, and safety information., • Communicate effectively with guests and team members in a fast-paced environment. Work Environment This position works in a fast-paced bakery environment that includes frequent interaction with guests, exposure to heat from ovens, refrigerated storage areas, cleaning chemicals, and moderate noise levels. Evening, late-night, weekend, and holiday shifts are a regular part of the business. Schedule Expectations Our bakeries are busiest during evenings, late nights, weekends, and holidays. Team Members should have availability during these peak business hours. Scheduling needs vary by location. Equal Employment Opportunity Insomnia Cookies is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where everyone feels welcome. We consider all qualified applicants for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other protected characteristic under applicable federal, state, or local law. Reasonable Accommodation If you require a reasonable accommodation during any part of the application or hiring process, please let us know. We are committed to providing reasonable accommodations to qualified individuals with disabilities. Additional Information Employment with Insomnia Cookies is contingent upon successful completion of any background checks, employment verification, and other pre-employment requirements applicable to the position and permitted by law. Ready to Join? Whether this is your first job or your next step, we're looking for people who bring great energy, take pride in their work, and love making someone's day a little sweeter. When you join Insomnia Cookies, you'll enjoy: • Competitive hourly pay, • Early Wage Access (get paid the next day!), • Flexible scheduling, • Employee discount (free cookies!) This is more than a shift supervisor role—it's your opportunity to develop your leadership skills, make an impact every day, and grow your career with one of the fastest-growing bakery brands in the country. Many of our Assistant Managers and Store Managers began their journey as Shift Leaders. If you're ready to lead a great team, delight guests, and help create warm moments one cookie at a time, we'd love to have you join the Insomnia Cookies family. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Insomnia Cookies was founded in a college dorm room by then-student, Seth Berkowitz. Fast forward 20 years and so... many....cookies... later, our innovative bakery + delivery concept has become a cult brand known for its rabid following of cookie lovers who crave Insomnia’s warm, delicious delivery all day and late into the night. With an expanding footprint of over 350 stores globally, an experiential, “sweet-easy” flagship concept, and large scale operations and delivery capabilities ... Insomnia Cookies is revolutionizing the cookie game by truly "Imagining What’s Possible"! At Insomnia Cookies, warm cookies are just the beginning. As a Cookie Crew Member, you're part baker, part hospitality expert, and part late-night hero. Whether you're welcoming guests into the bakery, pulling a fresh tray of cookies from the oven, or packing the perfect delivery order, you'll help create the experience that keeps our fans coming back night after night. Our bakeries move fast, especially after the rest of the world has called it a night. Every shift is a team effort, and every warm cookie, friendly interaction, and perfectly packed order matters. If you enjoy working with great people, thrive in an energetic environment, and love making someone's day just a little sweeter, you'll fit right in. WHAT YOU’LL DO: Every shift is a little different, but you can expect to: • Welcome every guest with genuine hospitality and make every interaction memorable., • Prepare, bake, and package our warm cookies, brownies, ice cream, and other treats to Insomnia's quality standards., • Accurately prepare in-store, pickup, delivery, and online orders., • Operate the register and process guest transactions., • Keep the bakery clean, stocked, organized, and food-safe throughout every shift., • Jump in wherever your team needs you, whether that's restocking supplies, helping a teammate, or keeping the line moving., • Resolve guest concerns with empathy and urgency, partnering with your Shift Leader when needed., • Deliver the kind of experience that turns first-time guests into lifelong Insomniacs.QUALIFICATIONS, • Must be 18 years of age or older, • Ability to obtain any required food safety certifications applicable to the location, • Ability to perform the essential functions of the position with or without reasonable accommodation. Physical Requirements This position regularly requires the ability to: • Stand and walk for extended periods of time (up to 8 hours per shift)., • Frequently reach, bend, stoop, twist, kneel, and lift., • Lift, carry, push, and pull up to 30 pounds regularly., • Occasionally lift up to 50 pounds with assistance., • Use hands and fingers to handle bakery equipment, food products, and a point-of-sale system., • Work in environments with varying temperatures, including around ovens, freezers, and refrigeration units., • Safely operate kitchen equipment in accordance with company procedures., • Read order screens, recipes, and safety information., • Communicate effectively with guests and team members in a fast-paced environment. Work Environment This position works in a fast-paced bakery environment that includes frequent interaction with guests, exposure to heat from ovens, refrigerated storage areas, cleaning chemicals, and moderate noise levels. Evening, late-night, weekend, and holiday shifts are a regular part of the business. Schedule Expectations Our bakeries are busiest during evenings, late nights, weekends, and holidays. Team Members should have availability during these peak business hours. Scheduling needs vary by location. Equal Employment Opportunity Insomnia Cookies is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where everyone feels welcome. We consider all qualified applicants for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other protected characteristic under applicable federal, state, or local law. Reasonable Accommodation If you require a reasonable accommodation during any part of the application or hiring process, please let us know. We are committed to providing reasonable accommodations to qualified individuals with disabilities. Additional Information Employment with Insomnia Cookies is contingent upon successful completion of any background checks, employment verification, and other pre-employment requirements applicable to the position and permitted by law. Ready to Join the Cookie Crew? Whether this is your first job or your next step, we're looking for people who bring great energy, take pride in their work, and love making someone's day a little sweeter. When you join Insomnia Cookies, you'll enjoy: • Competitive hourly pay, • Early Wage Access (get paid the next day!), • Flexible scheduling, • Employee discount (free cookies!), • Opportunities for growth into Shift Leader and other bakery leadership roles Many of our leaders started as Cookie Crew Members and Delivery Drivers. If you're looking for more than just a job, you'll find plenty of opportunities to grow with us. We can’t wait to meet you! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Kemco Integrated Services and Reliant Commercial About Us: Kemco has taken pride in our family values and exceptional service in the Restaurant and Retail sectors that started back in 1989 out of Montgomery, Alabama. We offer coverage from New Orleans to Southern Virginia; we are looking for dedicated professionals to join our team! Our family owned and operated business provides exceptional quality in commercial/industrial HVAC, refrigeration, kitchen equipment repairs, installation, and maintenance. We also offer trades such as carpentry, overhead doors, building restoration and more. Seeking experienced carpenter in Greer, SC Job Overview • Commercial carpenter needed to make repairs in retail stores, • Must be self-starter, reliable, team player, computer & smart phone skills, and good with paperwork systems., • Experience required in all types of interior finishes: sheetrock, suspended ceilings, carpet, ceramic tile and FRP. Work also includes steel frame doors, door hardware, commercial casework, and store fixtures. Commercial construction experience desired., • Must be a good problem solver and have excellent people skills., • Hourly position with 40 hours a week, W2 at the end of the year., • Occasional travel required. Hotel and per diem provided., • Some overtime required. Some 24/7 on-call service required.Benefits:, • Competitive salary, • Company Vehicle and Attire provided., • Health insurance, • Retirement plan and profit share programs, • Paid time off and holidays, • Ongoing training and professional development opportunities Powered by JazzHR yX9SCgON7q

Troubleshooting of mechanical piping and refrigeration systems equipment problems when called for assistance. Execution of quality mechanical repairs (including welding, piping and insulation works) as assigned. Execution of routine mechanical tasks to support process operation.

Innovative Refrigeration Systems, Inc. is the leading provider of industrial refrigeration and process cooling solutions, delivering custom engineered systems utilizing natural refrigerants such as ammonia and CO₂. Through a fully integrated approach encompassing engineering, manufacturing, construction, commissioning, nationwide service, and advanced aftermarket solutions, Innovative supports customers across the food and beverage, cold storage, pharmaceutical, industrial manufacturing, and mission-critical infrastructure markets throughout North America and around the world. Unlike traditional engineering firms, contractors, or equipment suppliers, Innovative performs engineering, manufacturing, construction, commissioning, service, and ongoing customer support entirely in-house. This integrated model provides employees the opportunity to support projects throughout the complete lifecycle, from concept and design through manufacturing, installation, startup, operation, optimization, modernization, and long-term system support. Job Role: The Senior Accountant will support the executive leadership team by managing the general ledger, directing the month-end close process, and overseeing other related accounting processes. This role requires the ability to work independently, adhere to deadlines, and execute ad hoc financial projects. The position interacts closely with the CEO, CFO, and Controller and offers significant opportunities for professional growth. Key Duties: • Maintain the general ledger, including posting journal entries, • Conduct bank and balance sheet account reconciliations, • Assist with monthly, quarterly, and annual close process, • Prepare financial statements, • Coordinate internal and external audits, • Analyze cost accounting reports and highlight areas for improvement, • Formulate financial models for strategic initiatives, • Compile reports for long-term planning by the executive team, • Improve departmental processes and manage special projects for the CEO and CFO Requirements: • Bachelor’s degree in Accounting or Business Administration, • Proficiency in accounting software and financial tools, • Excellent attention to detail and organizational skills, • Strong verbal and written communication abilities, • Self-motivated and driven to improve processes, • Must be able to remain in a stationary position (seated or standing) for extended periods, • Occasionally may need to lift or carry items up to 25 pounds (e.g., office supplies, small equipment) Preferences: • Certified Public Accountant (CPA) license, • Prior experience in construction or public accounting, • Previous leadership experience or interest in moving into management Benefits: In addition to a competitive base salary, we provide a comprehensive and employee-focused benefits package designed to support your financial security, health, and work–life balance: • Generous retirement plan with a dollar-for-dollar 401(k) match up to 15%, • 401(k) student loan repayment match up to 15%, • Medical insurance with 75% of employee and family premiums covered by the company, • Dental and vision insurance options, • Optional supplemental insurance coverage, • Short-term and long-term disability insurance, • Accidental death and dismemberment (AD&D) coverage, • Company-paid life insurance, • Weekly pay, • Competitive paid vacation and holiday time, • Paid sick leave, bereavement leave, and jury duty leave, • Employee referral bonus program, • Opportunities for career advancement, professional development, training, and apprenticeship programs, • Access to employee discounts on cell phone plans, vehicle rentals, and other eligible services If you are driven to succeed and want to be part of a rapidly growing company at the forefront of the industry, apply today!

Job Description Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring an Enterprise Application Support Analyst II. The Application Support Specialist provides second-level support for SAP and other enterprise applications or modules. This role is responsible for managing support tickets and recurring issues, engaging with key users and contributing to continuous improvements. The specialist works independently while collaborating closely with business and IT-internal stakeholders to ensure stable and efficient system operations. Furthermore the role is responsible to accompany a smooth transition from project completion to operational support, including taking ownership of the final acceptance of the solution at the end of the project. In addition, The Application support specialist also assists in project management, implementation planning, and test approach/planning for small to medium-sized improvements and projects. This role is centered on SAP Sales and Distribution (SD), with the opportunity to expand into related modules such as PP, MM, and FICO. Broader experience is a plus, but we value a willingness to learn and grow. This role is located in Louisville, KY and will be Hybrid. While this role is local, occasional travel to other locations will be required (10-20% travel). Responsibilities Enterprise Application Support Analyst II Responsibilities: • Independently manages and resolves second-level support tickets, incidents, recurring issues and complex SAP SD application and business-process issues, including root-cause analysis and coordination of cross-functional resolution when required., • Collaborates with key users to analyze, troubleshoot, and resolve problems., • Supports continuous improvements and enhancements to increase system efficiency and user adoption., • Perform application configurations, master data updates, and minor enhancements, as needed., • Accompanies the transition from project closure to ongoing operational support., • Document files, update knowledge articles, and share best practices with the user community., • Contribute system testing, user acceptance testing, and training activities for system changes or upgrades., • Strengthens and extends the knowledge of process and systems. Enterprise Application Support Analyst II Qualifications: • Must have a bachelor's degree., • 3 + years of hands-on SAP application experience, including strong functional experience in SAP Sales and Distribution (SD), with demonstrated ability to independently analyze and resolve complex application and business processe issues., • Excellent communication and collaboration skills for engaging with business users., • Must be willing and able to occasionally work outside of regular business hours (including weekends) if necessary, • This position requires travel, mainly to Germany and other Wieland business units as needed (10 to 20%)., • Strong business process and application experience in supply chain/Logistics/Material Management, background in finance is considered an asset., • Thorough understanding of S/4 HANA, SAP Net Weaver architecture, related business processes, and system configurations., • Knowledge of software development life cycle (SDLC) methodologies; programming logic and work-flow concepts; and test planning, coordination, and execution, • Demonstrated ability to effectively communicate in technical and non-technical terms, at all levels, within and outside the organization, with strong written and verbal communication skills. Qualifications Joining Wieland’s team gives you… • Benefits - Starting on Day 1! Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) contribution + match., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs – Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job Description Job description Maintenance Technician (Manufactured Home Community) Must have property and/or building maintenance experience. Weekly Pay Summary of Position We are looking for a hardworking, eager Maintenance Technician to join our team. Primary responsibilities include painting, home remodeling, minor plumbing, electrical work and landscaping etc. We are currently seeking dedicated individuals with a wide variety of skill sets. The ideal candidate will be able to work autonomously and responsibly by observing all health and safety guidelines and take pride in the standards and services they deliver to our residents INTERNAL REPORTING RELATIONSHIP(S) Community Manager POSITION ACTIVITIES AND TASKS · Assist in the setup of ventilation, refrigeration and other systems and conduct repairs when necessary · Maintain heating and plumbing systems to ensure functionality · Inspect alarm systems (fire, protection) and schedule repairs when needed · Perform manual repairs when necessary (fix locks, replace windows etc.) · Undertake activities of pest control such as spraying insecticide · Conduct general upkeep procedures and other tasks as assigned · Keeping grounds and landscaping in tip-top shape · Assist in budget preparation and ensure it is followed · Mowing, weed eating and hedge trimming (also includes performing preventative maintenance and repairs of equipment) KNOWLEDGE, SKILLS AND ABILITIES REQUIRED Physically capable of manual labor that includes lifting, bending, and reaching. Positive attitude and willingness to lead and work as part of a team Strong work ethic and organizational skills Puts high value on doing a good job and self-supervisory skills. · Basic understanding of plumbing and other systems · Knowledge of general maintenance processes and methods · Working knowledge of tools, common appliances and devices · Manual dexterity and problem-solving skills EDUCATION LEVEL REQUIRED · High school diploma or equivalent. EXPERIENCE REQUIRED · Building maintenance technology or relevant field will be a plus · Certified Maintenance and Reliability Professional (CMRP) is desired · Reliable transportation and valid driver's license · Maintenance Tools · Reliable transportation and valid driver's license · Negative Drug Test Disclaimer This position description is not intended, and should not be construed to be, an exhaustive list of all responsibilities, skills, efforts or working conditions associated with the job. It is intended, however, to be an accurate reflection of those principal job elements essential for making decisions related to job performance, employee development and compensation. As such, the incumbent may perform other duties and responsibilities as required.

Job Description Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring an Accounts Payable Processor. The Accounts Payable Processor will be responsible for high-volume invoice entry and validation using SAP and the Henrichsen OCR capture tool. This role focuses on accurate, timely processing of vendor invoices, ensuring proper workflow routing, and supporting daily operational needs across multiple business units. This role is located in Louisville, KY and will be fully on-site. Responsibilities Accounts Payable Processor Responsibilities: • Process high volumes of vendor invoices through Heinrichsen OCR and validate data before posting into SAP., • Review and correct OCR exceptions, including missing fields, failed matches, and routing errors., • Match invoices received through shared A/P email inboxes and incoming mail., • Maintain daily processing targets., • Assist with the identification of unmatched invoices; escalate issues for resolution., • Participate with continuous improvement initiatives related to OCR accuracy, processing speed, and data quality., • Ensure compliance with established internal controls, policies, and audit requirements., • Does not process or release payments. Accounts Payable Processor Qualifications: • 0-2 years of Accounting or Administrative experience preferred., • Experience with SAP/Oracle or other ERP systems preferred., • Comfortable with data entry, invoice processing, and digital workflows., • Proficiency with Microsoft Office, Especially Outlook and Excel., • Strong attention to detail and accuracy., • Ability to work in a fast-paced environment with high processing volumes., • Effective communication and willingness to ask questions and learn., • Team-oriented mindset with a positive, solution-focused attitude. Qualifications Joining Wieland’s team gives you… • Benefits - Starting on Day 1! Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) contribution + match., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs – Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Submit your CV and any additional required information after you have read this description by clicking on the application button.Senior Commercial HVAC/R Service Technician.Our client is a respected mechanical services provider known for delivering high-quality commercial HVAC and refrigeration sol

Drury Hotels - 9501 Blairwood Road - Responsibilities: Maintain safe and smooth-running hotel property and grounds; Complete repairs and preventative maintenance on plumbing, electrical, refrigeration, kitchen equipment and HVAC; Perform light carpentry, painting, vinyl and drywall repair; Implement

Coca Cola - - Responsibilities: Prepare equipment for installation following procedures; Maintain refrigeration systems per procedures; Inspect decals, timers, locks and asset tags; Perform housekeeping and safety compliance; Update inventory in SAP/CONA and data devices.

Senior Commercial HVAC/R Service Technician. The Senior HVAC/R Service Technician will diagnose, repair, and maintain advanced commercial HVAC and refrigeration systems. A self-driven technician who thrives in the field, solves complex problems efficiently, and delivers high-quality work with minima

Who Are We? EverSmith Brands is a rapidly growing platform of franchise brands serving the commercial facilities services sector. We have aggressive goals to become the premier franchisor in commercials services, providing growth opportunities for our franchisees and our home office team alike. EverSmith Brands is a portfolio company of the private equity firm Riverside Company, which has an extensive history as a growth investor in franchising businesses. The EverSmith Brands platform includes: • MilliCare, a premium, international franchise specializing in maintaining and restoring commercial flooring & textiles, • Kitchen Guard, a premier commercial kitchen exhaust cleaning franchise, • U.S. Lawns, the nation's #1 and largest exclusive commercial landscaping franchise, • Clintar, Canada's premier commercial landscaping & snow management franchise for 50+ years,, • Prism, a specialty restoration franchise for textiles, art, electronics, documents, and more,, • The Seals, a fast-growing commercial Kitchen Services Franchise providing refrigeration and oven gasket installation, door sweeps, and many other services, and, • 1-Tom-Plumber, an emergency service plumbing franchise specializing in emergency plumbing, drain cleaning, and excavation. Position Summary: EverSmith Brands is seeking an experienced and highly motivated Remote Outbound Sales Representative (SDR) to help schedule appointments for our growing network of franchisees. The ideal candidate is a dynamic, competitive sales professional with a background in B2B telemarketing and appointment setting. As an Outbound SDR, you will be the first point of contact for potential clients—responsible for managing leads, conducting prospect research, identifying key decision-makers, and scheduling appointments during structured phone blocks. Your goal is to help our franchisees grow by securing qualified opportunities for them to present our services. Responsibilities: • Outbound Calling: Place outbound calls to businesses from provided contact lists to schedule qualified appointments for franchisees., • Sales Pitch Delivery: Deliver compelling, scripted sales presentations that communicate the value of our services., • Lead Tracking: Maintain detailed records of calls, responses, and follow-ups to ensure effective pipeline management., • Manage Communication with Franchisees: Coordinate with franchisees to align appointment schedules and confirm target territories., • Manage Territory Research: Collaborate with franchisees to understand their target markets and growth goals., • Prospect Research: Use internal databases and tools to identify key decision-makers and their contact information., • Customer Engagement: Answer initial questions and provide relevant information to support decision-making., • Appointment Scheduling: Secure appointments for franchisees to meet with prospects onsite at the customer’s location., • Script & Compliance Adherence: Follow call scripts and maintain compliance with regulations., • Needs Analysis: Quickly assess and understand customer needs and present value-aligned solutions using persuasive communication skills. Required Qualifications: • Minimum of 3 years of successful B2B sales and telemarketing experience, • Experience working with CRM platforms (Salesforce preferred) and tracking KPIs, • Proficiency in Microsoft Office (Word, Excel, Outlook), • Excellent verbal and written communication, presentation, and negotiation skills, • Highly competitive, motivated, and enthusiastic with a strong work ethic, • Articulate with strong active listening and interpersonal skills, • College Degree Preferred (High school diploma or equivalent required), • Residing in Central Florida is preferred (but not required), • Experience using research tools to find customer contact information Compensation: $50,000 annually + Monthly performance bonuses uncapped (total earning potential of $100,000 annually) Benefits: • Full time position, • Competitive salary, • Annual performance bonus, • Paid time off, • Paid holidays, • Medical, dental, vision insurance, • Company paid life and disability insurance, • 401K with company match, • Great working environment (energetic, fun, friendly, casual, and collaborative), • Growth opportunities, • Employee assistance program, • Flexible spending account, • Health savings account Physical Requirements: The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. The employee should be able to stand, sit at an office space, see, hear and understand speech, communicate, lift computer equipment, supplies and materials, use office equipment and computers. The employee is exposed to typical office working conditions. If requested by an applicant or employee, we may provide reasonable accommodations to enable individuals with disabilities to perform the essential job functions. The above statements are intended to describe the general nature and level of work performed. They are not intended to be construed as an exhaustive list of all duties required of personnel so classified. We have the exclusive right to alter this job description at any time without notice. EverSmith Brands is committed to Equal Employment Opportunity and to attracting, retaining, developing and promoting the most qualified employees without regard to their race, gender, color, religion, sexual orientation, national origin, age, physical or mental disability, citizenship status, veteran status, or any other characteristic prohibited by federal or state law. We are dedicated to providing a work environment free from discrimination and harassment, and where employees are treated with respect and dignity.

Who Are We? EverSmith Brands is a rapidly growing platform of franchise brands serving the commercial facilities services sector. We have aggressive goals to become the premier franchisor in commercials services, providing growth opportunities for our franchisees and our home office team alike. EverSmith Brands is a portfolio company of the private equity firm Riverside Company, which has an extensive history as a growth investor in franchising businesses. The EverSmith Brands platform includes: • MilliCare, a premium, international franchise specializing in maintaining and restoring commercial flooring & textiles, • Kitchen Guard, a premier commercial kitchen exhaust cleaning franchise, • U.S. Lawns, the nation's #1 and largest exclusive commercial landscaping franchise, • Clintar, Canada's premier commercial landscaping & snow management franchise for 50+ years,, • Prism, a specialty restoration franchise for textiles, art, electronics, documents, and more,, • The Seals, a fast-growing commercial Kitchen Services Franchise providing refrigeration and oven gasket installation, door sweeps, and many other services, and, • 1-Tom-Plumber, an emergency service plumbing franchise specializing in emergency plumbing, drain cleaning, and excavation. Position Summary: The Growth Marketing Specialist owns lifecycle marketing and lead nurture for the brand and its franchisees, directs national campaign strategy for lead generation, and leads franchisee marketing enablement and local activation. This role owns the website end-to-end — conversion-rate optimization, site health, and the Bright Pink vendor ticket queue — under the Director of Marketing’s SEO direction and budget authority, and partners with the Director on performance reporting across campaigns, the website, and paid media. Paid search and paid social are executed by Ironmark, with this role managing the day-to-day vendor relationship, testing, and reporting until owner buy-in and proof of concept are established. This role serves as a key connection between the corporate marketing team and franchisees, translating national marketing strategy into local campaign kits, resources, and guidance that franchisees can easily activate, while content production, social publishing, and day-to-day franchisee platform support are executed by the Marketing Coordinator and Franchisee Marketing Specialist. The ideal candidate is a strategic, data-driven marketer who is organized, proactive, highly collaborative, and comfortable managing vendor relationships, marketing technology, and cross-functional priorities to drive lead generation and franchisee growth. Key Responsibilities: 1. NATIONAL CAMPAIGN STRATEGY & LEAD GENERATION • Develop and execute data-driven national marketing campaigns that drive awareness, lead generation, engagement, and retention., • Own campaign briefs and architecture behind the monthly content calendar — audience, offer, channel mix, and measurement — partnering with the Marketing Coordinator on production and publishing., • Own website conversion-rate-optimization (CRO) strategy as the conversion half of lead generation: define lead-generation offers and conversion paths, and prioritize form, landing page, and conversion-path improvements; submit page builds and development work to the Bright Pink website vendor within Director-approved scope and budget., • Track campaign performance against awareness, lead, engagement, and retention goals, and recommend ongoing optimizations. 1. FRANCHISEE MARKETING ENABLEMENT & LOCAL ACTIVATION • Serve as the marketing resource for Franchise Business Consultants (FBCs) and franchisees, providing proactive guidance on collateral requests, local advertising questions, and territory marketing strategy., • Develop scalable, localized marketing content and campaign resources that maintain brand consistency across markets., • Build local campaign kits — prepackaged, ready-to-launch campaign sets covering local promotions, local search, and paid social, each with the creative, copy, and setup steps an owner needs — and track kit publication and owner adoption., • Supply the campaign content and examples that support franchisee content coaching and Local Marketing Playbook training. 1. EMAIL / LIFECYCLE MARKETING & LEAD NURTURE • Own email drip and lifecycle campaign strategy, architecture, segmentation logic, messaging, and test plans, including enhancement and win-back sequences., • Build, schedule, and send lifecycle campaigns in ActiveCampaign, partnering with the Marketing Coordinator for list prep, segment uploads, and test-send proofing., • Analyze lifecycle and email performance — opens, clicks, and conversion/lead outcomes — and direct resulting segmentation and content changes., • Define requirements for building ActiveCampaign into a structured lead-feedback and CRM process, and manage platform configuration, integrations, and data hygiene. 1. WEBSITE OWNERSHIP, DIGITAL PERFORMANCE & SEO COLLABORATION • Own the website end-to-end: CRO, site health, and the Bright Pink vendor ticket queue — scoping, prioritizing, and QA’ing vendor work within Director-approved scope and budget., • Analyze website and campaign lead data across acquisition channels to surface trends and opportunities., • Partner with the Director of Marketing on national, regional, and local keyword strategy and SEO opportunities., • Build monthly performance reporting for brand leadership covering campaigns, lifecycle, website, and paid performance, incorporating reputation and review metrics, and automate manual report assembly where possible. 1. PAID DIGITAL / PPC VENDOR COORDINATION • Own the day-to-day Ironmark vendor relationship: campaign briefs, scope, reporting cadence, and QA of deliverables., • Support controlled PPC and paid social tests with a clear hypothesis, defined audience, and measurement plan; define what qualifies as a lead, track cost per qualified lead, and document results to support scale-or-stop decisions., • Provide vendor invoice details and budget input to the Director of Marketing for reconciliation. Required Qualifications: • Bachelor's degree in Marketing, Communications, Business, or a related field., • 3–5 years of experience in digital, content, social media, or integrated marketing, preferably within a franchise, multi-location, B2B, or consumer services environment., • Strong copywriting, editing, and content creation skills with experience developing marketing content across multiple channels., • Experience with email marketing and marketing automation platforms such as ActiveCampaign, HubSpot, Constant Contact., • Understanding of social media analytics and tools such as Google Analytics/GA4, platform insights, and other marketing reporting tools., • Ability to analyze and identify keyword strategies applicable at national, regional, and local levels, with a working knowledge of SEO and local SEO., • Knowledge of basic graphic design and video editing tools such as Canva, Adobe Express, or similar., • Comfortable using AI tools and emerging marketing technologies to improve content creation, efficiency, and marketing workflows., • Excellent written, verbal, communication, and interpersonal skills., • Strong organizational and project management skills with the ability to manage multiple priorities and deadlines., • Ability to support franchisees with localized content and marketing initiatives., • Willingness to travel approximately 15–20%. Benefits: • Full time position, • Competitive salary, • Annual performance bonus, • Paid time off, • Paid holidays, • Medical, dental, vision insurance, • Company paid life and disability insurance, • 401K with company match, • Great working environment (energetic, fun, friendly, casual, and collaborative), • Growth opportunities, • Cell phone reimbursement, • Employee assistance program, • Flexible spending account, • Health savings account Physical Requirements: The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. The employee should be able to stand, sit at an office space, see, hear and understand speech, communicate, lift computer equipment, supplies and materials, use office equipment and computers. The employee is exposed to typical office working conditions. If requested by an applicant or employee, we may provide reasonable accommodations to enable individuals with disabilities to perform the essential job functions. The above statements are intended to describe the general nature and level of work performed. They are not intended to be construed as an exhaustive list of all duties required of personnel so classified. We have the exclusive right to alter this job description at any time without notice. EverSmith Brands is committed to Equal Employment Opportunity and to attracting, retaining, developing and promoting the most qualified employees without regard to their race, gender, color, religion, sexual orientation, national origin, age, physical or mental disability, citizenship status, veteran status, or any other characteristic prohibited by federal or state law. We are dedicated to providing a work environment free from discrimination and harassment, and where employees are treated with respect and dignity.

Position Summary: The Sales Manager will specifically focus on sales and application of the PSG product and related solutions into the refrigeration, HVAC/R, and cooling systems industries in alignment with the goals and objectives of Dover and PSG. This individual will be the front-line key driver for sales and market development initiatives in the assigned cooling market(s), with a strong focus on refrigeration system manufacturers, OEMs, system integrators, engineering firms, contractors, direct customers. The Sales Manager will coordinate efforts with Sales, Marketing, Engineering, Manufacturing and Finance to service existing customers, develop new accounts, secure specifications, and grow sales in the assigned cooling market(s). Essential Duties and Responsibilities: • Responsible for incremental sales growth per plan in the US market, maximizing effectiveness of direct, OEM, representative, direct customer, and other sales channels., • Achieve projected sales gains through consultative, value-added selling focused on customer applications, system performance, total cost of ownership, reliability, energy efficiency, and lifecycle value rather than simply order taking., • Develop and execute route-to-market strategies using the most effective combination of direct sales, OEM, system integrator, manufacturer’s representative, direct customer, and other channels to maximize sustainable growth., • Develop and implement route-to-market models for refrigeration and cooling-system OEMs, system integrators, contractors, A&E/engineering firms, direct customers, and strategic end users, as appropriate for the assigned market., • Create specification pull-through and design-in opportunities by developing relationships with OEMs, refrigeration system manufacturers, system integrators, A&E firms, consultants, contractors, and other key influencers., • Identify competitive displacement opportunities and capture market share from incumbent pump, refrigeration, and cooling-solution suppliers by clearly differentiating product performance, application fit, reliability, service, and value. Qualifications / Requirements: • 5+ years’ experience selling into the refrigeration, HVAC/R, cooling systems, thermal-management, industrial cooling, or related markets, with demonstrated understanding of the customer buying process and key industry requirements., • Bachelor’s degree in engineering, Business, Marketing or related field, • Demonstrated success developing OEM, system-integrator, engineering, contractor, direct customer, and end-user relationships and converting technical opportunities into profitable sales., • Strong technical and consultative sales capability, with the ability to understand customer applications, identify system requirements, collaborate with engineering, and translate technical value into a compelling commercial proposition., • Self-sufficient and self-motivated. Works with little supervision while effectively communicating plans, priorities, pipeline status, and outcomes. Established network and/or experience interacting with refrigeration, HVAC/R, cooling-system, OEM, engineering, contractor, direct customer, and system-integrator organizations., • Strong work ethic, competitive spirit, customer focus, and commitment to winning profitable business., • Ability to travel 50-75% domestically within the US territory, • This role may be based in any US location with convenient access to a major airport Desired Characteristics: • Strong team player who collaborates effectively across Sales, Marketing, Engineering, Manufacturing, Finance, and other functions., • Strong technical problem-solving capability related to pumps, fluid handling, refrigeration systems, cooling circuits, and associated equipment and applications., • Clear, concise, and articulate verbal, written, listening, presentation, and interpersonal skills at all levels of the organization and customer base., • Ability to multi-task and perform in a dynamic environment, including managing complex sales projects and business-support activities while traveling.

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries with over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 75,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety, and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: This position is responsible for all activities on a construction site or several sites including liaison with the client, all mechanical and electrical activity as well as the welfare, health and safety of all personnel and environmental responsibility. This role will also provide support to the US Energy Aftermarket Team for all aspects of the bidding process from quotation through completion of the purchase contract. The role of site manager will also actively manage sub-contract labor to ensure timely execution of the installation project and ensure all site safety procedures are adhered to. Key Accountabilities: 1) Pre bid activities • Technical review of internal and external client enquiries as they pertain to site installation, • Preparation of technical documentation to support bidding activities, • Site surveys to document client requirements and dimensional checks of existing equipment for both Energy and APC groups, • Preparation of install estimates including labor and equipment requirements, • Analyses and proposes changes in equipment or use of materials which could result in cost reduction or more efficient operation 2) Post order activities • Coordinates and expedites on site dismantling and installation of plant related equipment, • Responsible for the complete site management of relative AAF site, • Responsible for Environmental, Health and Safety conditions on site, • Production of and subsequent execution of project related documents examples of which include:, • o Risk assessment and method statements, • o EH&S programs, • o Site Programs / schedules, • Responsible for actively managing sub-contract labor to ensure timely execution of dismantling / installation project and that all site safety procedures are adhered to, • Responsible for technically and commercially controlling multiple project activities simultaneously, working to tight time deadlines and operate efficiently under pressure, • Ensures company standard procedures are followed in connection with purchase of material or services, • Leads meetings or direct communications with customer to assist in resolution of problems or complaints during site outages, • Report and escalate to management risks as needed, • Commissioning of AAF products on site, • Troubleshooting and determination of fix for any product site issues 3) Sub-contractor & equipment assessment / management • Locates and assesses potential fabrication and installation subcontractors, • Collates and submits necessary enquiry documents, • Obtains / analyses quotations, • Coordinates / expedites contract deliverables 4) Quality Management • To oversee all quality and inspection requirements for the EP and small MFAS equipment including the development and continual improvement of associated quality program(s), these being in alignment with US, • Responsible for the development, implementation, and continuous improvement of P&I’s Product Quality Program, • Supervise, teach, and manage external vendors to deliver products compliant to P&I’s Quality Program, Engineering specifications, and manufacturing standards., • Support Supplier Development efforts and manage/monitor vendor quality metrics including documenting and maintaining supplier capabilities (in conjunction with the Sourcing team)., • Meet with vendors, customers, quality representatives, and company personnel to discuss and resolve quality problems as required., • Responsible for assigned supplier performance in coordination with the Souring Director. Develop and maintain supplier quality KPIs to assure the consistent use of high-quality vendors., • Suggest to management product improvement ideas, alternative materials, and sourcing strategies based on industry and supplier research 5) Maintains a teamwork philosophy with other departments to facilitate problem solving and good customer service . 6) Additional duties as assigned. Requirements: Position Requirements: • Bachelor’s degree in Engineering preferred;, • Experience in technical industry desired; machinery/engineering preferred;, • 7-10 years' working in site construction / installation experience essential;, • Structural steel and plate fabrication experience;, • Ability to manage small to medium construction sites;, • Proven man management experience leading site installation teams within Power, Oil & Gas or industrial markets;, • Proven experience managing sub-contractors;, • Experience managing operating costs and budgets;, • Working knowledge of safety and environmental practices and regulations including OSHA compliance and a proven record of improving safety results;, • Demonstrated leadership, influence and communication skills;, • Must have strong interpersonal skills, maturity and good judgment and be capable of communicating with a diverse range of individuals;, • Excellent, proven interpersonal, verbal / written communications and organizational skills;, • Demonstrated ability to multi - task and work in a fast - paced setting;, • Experience in managing or operating within a multi-discipline construction team, • Must exhibit the following core competencies: o communication skills o problem analysis and solving o organizational and planning skills o judgment o attention to detail o negotiating skills o creativity o team player o stress tolerance o customer orientation o presentation skills

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective This introductory role is a foundation for a career in industrial sales. In this position you will primarily build and communicate quotations for inbound inquiries to existing customers. A highly successful individual in this role will be able to build a rapport with the customer to assess additional needs we can fulfill and grow your assigned territory. Key Responsibilities • Serves as regional contact for EP aftermarket inquiries from existing or potential customers and provides quotations and sales support as necessary., • Execute annual goals and objectives of the Sales & Marketing plan for EP business unit, within assigned region., • Build relationships with new and existing customers through telephone, email, and video conferencing., • Maintain strong, accurate and current aftermarket sales pipeline for the region, within SalesForce., • Works closely with customer service and other key departments i.e. engineering and sourcing, to develop quotations., • Responsible for quality of purchase order documents and associated information required for the order-entry process., • Actively negotiate sales price of product to win the sale. Product Parts Research -Ability to research product drawings and other computer records to obtain correct part identification, to meet customer needs. -Works closely with other departments to develop sourcing, pricing and technical data needed for final quotation. Sales Rep Interaction -Communicates regularly with the external regional sales managers, to ensure team success. -Provide management with regional market intelligence. Key Process Indicators (KPIs) Owned: -Aftermarket quotation response time -Regional Sales Bookings -Weekly Activity Report -SalesForce Accuracy and Aging for Leads and Opportunities Stakeholder Interactions: • Customers (Internal or External), • Regional End Users, • Authorized Sales Representatives, • AAF Regional Sales Manager, • AAF Application Engineering, • AAF Sourcing Team Requirements: Technical Requirements: -Mechanical Aptitude -Interest in mechanical equipment -Excitement to learn Knowledge/Experience: -Strong communication skills (verbal and written) -Excellent computer skills (especially in MS Office). -Experience with CRM systems, preferably SalesForce. -Excellent organizational skills -Travel may be required (estimated <5%) Desired -B2B sales experience. -Experience reading engineering drawings Education Requirement: Bachelors Degree with out experience. Associates Degree with two years of business to business sales experience. No Degree needed with four years of business to business sales experience. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk and sit. The employee is occasionally required to use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.

Job Description Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring a Commercial Systems & Process Optimization Manager. The Commercial Systems & Process Optimization Manager will be responsible for improving the efficiency, scalability, and effectiveness of the marketing team through reporting automation, development of AI-enabled analytical tools, data governance, and process improvement. This role serves as the leader for commercial data infrastructure and process excellence, partnering closely with sales, customer service, operations, supply chain, finance, and IT to ensure timely access to accurate and actionable business information. The position develops and deploys solutions that automate recurring reporting, improve data quality, streamline commercial workflows, and accelerate decision-making across forecasting, pricing, profitability analysis, and customer management activities. This role is located in Louisville, KY and will be fully on-site. Occasional travel to other locations may be required (up to 20% travel.) Responsibilities Commercial Systems & Process Optimization Manager Responsibilities: Commercial Data & Analytics Enablement: • Serve as business unit lead for commercial reporting and analytics systems (Power BI, SAP/SAP Analytics Cloud, Other ERP Systems, CRM, pricing & profitability, market intelligence)., • Improve consistency, accessibility, and accuracy of customer, product, pricing, margin, and market data., • Support commercial team through scalable analytical solutions focused on automation and standardization to replace manual activities., • Establish and maintain commercial data governance standards to improve master-data integrity., • Partner with IT as well as other internal and external resources on data optimization projects. Business Intelligence & Reporting: • Own the commercial reporting infrastructure supporting the business unit., • Identify practical applications for AI and automation within sales & marketing team., • Create and maintain dashboards, scorecards, and self-service analytics solutions., • Develop advanced analytical capabilities supporting forecasting, pricing, profitability, customer segmentation, and market intelligence., • Support recurring business assessments including weekly tracking, monthly updates, and quarterly reviews. Process Optimization & Continuous Improvement: • Lead and support process improvement initiatives across commercial workflows., • Assess and document current-state processes to identify inefficiencies, bottlenecks, and manual work., • Develop and implement future-state workflows that improve productivity and user experience., • Measure and track realized benefits from process improvement projects., • Key process areas include pricing administration, quoting, contract administration/tracking, customer onboarding, reporting, budgeting, and forecasting. Commercial Systems & Process Optimization Manager Qualifications: Competencies and Qualifications • Bachelor's degree in business or related field (data analytics, marketing, finance, economics)., • 5-10 years of experience in analytics, business intelligence, process improvement, or systems management., • Manufacturing experience preferred., • Demonstrated success leading process improvement initiatives and influencing cross-functional teams., • Experience implementing reporting, dashboard, or automation solutions., • Technical Skills: Advanced Power BI expertise, advanced Excel and data modeling skills, ERP systems experience (SAP preferred), CRM systems experience, AI and automation tool experience preferred., • Leadership Skills: problem-solving and analytical reasoning, intellectual curiosity, emotional intelligence, personal integrity, change management capability, systems & processes mindset, team-oriented approach. Qualifications Joining Wieland’s team gives you… • Benefits - Starting on Day 1! Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) contribution + match., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs – Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Louisville, KY Meriton is a national team of experts driving HVAC innovation through a network of high-performing companies. From strategy and support to systems and solutions, we work behind the scenes to strengthen operations and build valuefor our partners and our people. If you're looking to make an impact, we're glad you're here. At Meriton, you'll join a team that believes in big ideas, doing great work, and building careers that matterevery step of the way. The Enterprise Account Manager, National Accounts is responsible for pursuing and closing all business opportunities within specific named account targets. The role penetrates and navigates at all organizational levels, with a focus on executive decision makers. Minimum Required Qualifications • Minimum 5 years of Account Management, Business Development, or Sales experience within the Commercial HVAC, Mechanical Services, Building Automation, or Facilities Services industry., • Proven success managing and growing National Accounts, Multi-Site Clients, or Enterprise Customers in a B2B environment., • Demonstrated ability to build relationships with executive leaders and key stakeholders., • Experience developing strategic account plans that drive revenue growth and customer retention., • Strong understanding of contract negotiations, pricing strategies, procurement processes, and compliance requirements., • Exceptional communication, presentation, and business acumen., • Ability to travel as required to support customer meetings, industry events, and strategic account initiatives. Preferred Qualifications • 8+ years successful B2B sales and account management experience in commercial HVAC or mechanical systems., • Experience selling into Retail, Restaurant, Industrial Manufacturing, Hospitality, Semiconductor, Advanced Manufacturing, Data Center, or Distribution verticals., • Experience managing Fortune 1000 or large multi-location enterprise accounts., • Track record of exceeding quotas and leading complex enterprise sales cycles., • Demonstrated success securing and growing national service agreements, mechanical service programs, retrofit projects, energy solutions, or capital equipment opportunities., • Experience collaborating with manufacturers, distributors, contractors, and service organizations within the HVAC ecosystem., • Track record of exceeding annual sales quotas and achieving sustained revenue growth within assigned accounts., • Experience leading complex pursuit strategies, RFP responses, contract negotiations, and enterprise sales cycles., • Knowledge of facility management, energy management, HVAC systems, controls, refrigeration, or mechanical infrastructure applications., • Experience leveraging CRM analytics, customer business reviews, and account planning tools to drive strategic growth initiatives. Ideal Candidate Profile The ideal candidate is a strategic enterprise seller and relationship builder with deep commercial HVAC experience and a proven history of growing national account relationships across multiple locations and stakeholders. Successful candidates will have experience selling into large, multi-site organizations within Retail, Restaurant, Industrial, Hospitality, Semiconductor, Advanced Manufacturing, or other enterprise verticals. They are strategic thinkers who can develop executive-level relationships, identify growth opportunities, navigate complex organizations, and align internal resources to deliver exceptional customer outcomes. They are equally comfortable in the boardroom with senior executives and in operational discussions with facilities, engineering, procurement, and maintenance teams, serving as a trusted advisor who creates long-term value for both the customer and Meriton. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Opportunity for advancement, • Training & development, • Vision insurance About FASCore FASCore Construction LLC is a Texas-based engineering and construction company building advanced manufacturing facilities across the U.S. This position is for our Jeffersonville, Indiana project (Louisville area). Key Responsibilities • Perform engineering-based field tasks including electrical installation support, HVAC system deployment, equipment mounting, and mechanical assembly., • Apply engineering principles to wiring and breaker sizing, load calculations, and NEC compliance., • Review installation quality, torque checks, labeling, equipment startup conditions, and compliance with engineering drawings., • Diagnose electrical faults, HVAC performance issues, and startup irregularities; coordinate corrective actions., • Prepare field reports, redlines, installation photos, test logs, and commissioning notes., • Work with project managers, subcontractors, inspectors, and suppliers for safe, compliant, timely execution., • Follow OSHA, NEC, and FASCore safety protocols, including lockout/tagout and PPE.Requirements, • Authorized to work in the U.S. under OPT (Optional Practical Training) eligibility., • Bachelor's degree in Electrical, Mechanical, Mechatronics, HVAC, or Industrial Engineering, or Engineering Technology., • Strong bilingual communication skills (English + Chinese preferred)., • Understanding of wire sizing, breaker selection, conductor ampacity, and NEC compliance., • Familiarity with HVAC fundamentals: airflow, refrigeration cycles, equipment startup, basic commissioning., • Ability to read electrical one-lines and mechanical schematics., • Strong engineering judgment and troubleshooting ability.Professional Development & Training, • FASCore pays training costs for Journeyman and Master Technician licensing, coursework, and exams., • Structured mentorship from Master Technicians, Project Managers, and Licensed Professional Engineers (PEs)., • Career path: Entry Engineer, Field Engineer, Project Engineer, Senior Engineer, PE-track roles., • OPT candidates may transition to long-term employment based on performance and visa eligibility.Benefits, • Health, dental and vision insurance, • 401(k) You may also email your resume to hr@fascoregroup.com. FASCore is an equal opportunity employer.

Job DescriptionDescription: Description AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: Provide world-class Customer Service by exceeding customer expectations using advanced soft skill techniques, advanced product and system knowledge, and timely yet thorough problem-solving/dispute resolution. This role will serve as a cross-functional liaison working with other departments, including Sales, Accounts Receivable and Operations, to ensure customer satisfaction. Key Accountabilities: • Collaborate with customer, direct sales team, and other departments to provide information about products and services, quotes, order entry including will calls, order confirmations, invoice copies, customer complaints, and order status/maintenance. • Receives, investigates, and responds to customer inquiries while prioritizing urgent matters., • Maintain knowledge on lead times, product information, pricing, shipping schedules and other information to accurately and efficiently. • Keep records of customer interactions and transactions, recording details of inquiries, complaints, and comments, as well as actions taken in SAP and PC software systems. • New Customer Set-up in SAP including working with the credit and collections department to process credit application. • Maintain knowledge on company products and processes., • Customer Master File Maintenance including updating contact information, sold-to, ship-to, shipping terms, pricing, and customer specific text requirements. • Assists Credit department with invoice disputes and billing error resolutions., • Provide freight estimates as required to ensure customer satisfaction; work with Operations on delivery/freight estimates as required to ensure accuracy. • Performs other duties as assigned. Requirements: Position Requirements: • High school diploma or equivalent is required. Associate or Bachelor’s degree preferred;, • 5 years’ prior experience in customer service or related area, preferably in a manufacturing/Industrial environment;, • Must be proficient with Microsoft Office (Word, Excel, PowerPoint, Outlook);, • Industry knowledge/experience is desired. Must exhibit the following core competencies: • Communication skills, • Ability to calculate figures and amounts such as discounts, commission, and percentages., • Ability to apply basic algebra and geometry., • Problem analysis and solving, • Organizational and planning skills, • Attention to detail, • Creativity, • Team player, • Stress tolerance Additional Requirements: • The profile needs to be a commercial extravert person willing to build relationships with both external and internal customers;, • Ability to contact customers in a proactive way;, • Health, safety and environmentally conscious;, • English communication skills including face to face, telephone and written;, • A first level of immediate customer responses;, • Flexible approach to working, willingness to accept changing priorities;, • To seek support from Manager when needed;, • Telephone contact and communications skills are an asset for this job.

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: The Energy Project Engineer is responsible for all technical aspects of the given project/product assigned, including design, Engineering cost & schedule, customer interface, and internal interface and has ultimate responsibility for delivering the engineering package that is compliant with the client contract as well as with AAF International standards. Others have the responsibility of delivering the items to the project engineer (handover data, engineering estimates, etc.), but the Project Engineer will ultimately be responsible for the production of all engineering deliverables on time and accurately. Key Accountabilities: • Review customer specifications and internal contract specifications in order to deliver an engineering package compliant with both., • Be the primary point of contact between customer and AAF on technical issues for a given project., • Maintain engineering deliverable (internal and external) schedule and advise project manager of any risks or changes to the schedule., • Maintain total engineering cost (including hours and cost vs. as-sold estimate) and advise project manager of risks and opportunities., • Review client change requests technically and advise project manager of impact to engineering and scope. Discuss with client as necessary., • Direct various engineering resources (internal and external) as necessary to obtain engineering deliverables on time and accurately, working with engineering management where necessary when issues arise., • Produce/review/approve all engineering deliverables for projects assigned., • Support sales and applications team as necessary for bid data and development., • On site advisor support as necessary at supplier and customer locations.Requirements: Position Requirements: • Bachelor’s degree in Engineering required, or equivalent experience. Mechanical/Electrical preferred. Civil, structural, chemical, etc. acceptable or equivalent experience;, • Experience in technical industry desired;, • Hold a valid passport, international travel may be required;, • Experience in a technical field involving metal fabrication, machining, manufacturing preferred;, • Experience reviewing and applying customer specifications, internal specifications, and industry standards preferred;, • Field experience in manufacturing environment preferred. Inspection, trouble-shooting, expediting, etc;, • Excellent time management skills and ability to multi-task;, • Strong organizational skills with aggressive follow-through and closing skills;, • Excellent communication and presentation skills;, • Must have strong interpersonal skills, maturity and good judgment and be capable of communicating with a diverse range of individuals;, • Demonstrated ability to multi -task and work in a fast - paced setting;, • Knowledge of 2D fabrication drawings, 3D models, and design to verify design of equipment from environmental and process condition basis;, • Ability to communicate technical details proficiently through various tools such as drawings, models, instruction manuals, installation drawings, etc.;, • Must exhibit the following core competencies:, • Communication skills, • Problem analysis and solving, • Technical analytics – apply knowledge, • Strategic thinking and planning, • Organizational and planning skills, • Judgment, • Attention to detail, • Negotiating skills, • Creativity, • Team player, • Stress tolerance, • Customer orientation, • Presentation skills

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Candidates for this role must live in Indiana or Illinois Position Objective: The Key Account Manager promotes and sells the company’s products and services in accordance with established sales policies and procedures. Maintains relationships with existing customers. Identify and support new customer relationships as well. Able to work closely with multiple departments within company. Document progress and successes within CRM. Key Accountabilities: • Promotes/sells/secures orders from existing and prospective customers through a relationship-based sales approach highlighting the advantages/value proposition., • Demonstrates products to existing and potential customers and assists them in selecting those best suited to their needs., • Manages sales goals - profit and budget expenses., • Establishes, develops and maintains business relationships with current customers and prospective customers in the assigned territory/market segment to maintain current and generate new business., • Researches sources for developing prospective customers and for information to determine their potential., • Develops clear and effective written proposals and quotations for current and prospective customers., • Expedites the resolution of customer problems and complaints., • Coordinates sales effort with marketing, sales management, accounting, logistics and technical services., • Analyzes the territory/market’s potential and determines the value of existing and prospective customers to the Company., • Creates and manages a customer value plan for existing customers highlighting sales profile, share and value opportunities., • Provides management with detailed information on customer needs, problems, interests, competitive activities, and potential for new products., • Stays current with product applications, technical services, market conditions, competitive activities, and marketing trends and activities., • Participates in trade shows and conventions as required., • Perform other related duties as assigned as required. Requirements: Position Requirements: • Bachelor’s degree from an accredited university in Business or related field preferred;, • 5+ years' prior selling experience;, • Understanding and experience with high value-added product selling, pricing, and negotiation;, • Experience selling to healthcare and pharmaceutical facilities a plus;, • Ability to communicate a technical concept or value added benefit to achieve buy-in from diverse teams to meet sales targets and profitability;, • A history of consistently delivering on expectations for growth and profitability must be demonstrated;, • A team player that possesses a natural way of influencing, both internally and externally;, • A self-starter with a creative eye to implement marketing and promotional campaigns designed to achieve specific growth objectives regionally and nationally;, • Must be proficient in Microsoft Office (Word, Excel, PowerPoint);, • SAP or CRM experience, Salesforce preferred.

Job DescriptionCompany Description If you love saying YES and enjoy engaging with the community by leading with ART, 21c Museum Hotels is one of the pioneering examples of bridging the worlds of art and hospitality. We combine a multi-venue contemporary art museum, boutique hotel and a chef driven restaurant to create a unique and welcoming opportunity. Come join our Flock! Job Description Reports To: Executive Chef Profile: The Pastry Cook works alongside the Pastry Chef making scratch desserts for a full service restaurant and banquet department. This position also includes the plating of desserts and communication with other departments. This position will adhere to 21c procedures and standards to maintain a safe, orderly and sanitized kitchen. Specific Responsibilities: Understands menu and techniques to execute items Produces scratch desserts following 21c recipes. Plates banquet desserts and assists Garde Manger station in the restaurant on occasion. Owns assigned service period. Relays important information to line staff and Front of House in the Pastry Chef’s absence Maintains a clean and organized workspace and storage. Stays aware of local, state and federal sanitation laws. Understands and practices proper use and maintenance of major kitchen equipment, including stoves, refrigeration units, knives, slicers and dish machines. Other duties as assigned by supervisor or manager. Qualifications Ability to multi-task, manage time, and work independently. Ability to work flexible hours (nights, weekends). Able to be part of a team Responsible, dependable, punctual. Strong communication skills; must be able to speak, read, and understand English. Must work well under pressure. Clean and professional appearance. Demonstrated enthusiasm for all things 21c. Must pass background check. Education/Formal Training: High school or equivalent education required. Experience: Culinary training and cooking experience with demonstrated supervisory experience in the culinary field is a plus. Additional Information All your information will be kept confidential according to EEO guidelines. 21c Museum Hotels is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other legally protected characteristic. The EEO is the Law poster is available here: http://www1.eeoc.gov/employers/poster.cfm

Job Description Kept Companies is the largest self-performing commercial cleaning and maintenance company in the nation. With nine leading brands and over 100 locations nationwide servicing industries including restaurant, solar, retail, transportation, and supermarket. Kept Companies is the leading provider of commercial fleet washing, retail equipment refurbishing and sales, refrigeration, hood, coil and solar panel cleaning, and parking lot services. Job Summary: This position is responsible for performing pressure washing and industrial cleaning services for commercial properties, fleets, sidewalks, buildings, and equipment. Duties include cleaning kitchen exhaust hood systems, assisting with pavement marking and line striping projects, operating and maintaining specialized trucks and field service equipment, and loading, transporting, and unloading materials to and from job sites. The role requires adherence to strict safety procedures, troubleshooting basic equipment issues, and working efficiently in outdoor environments under varying weather conditions while delivering high-quality service to clients. Essential Job Functions: · Operate trucks & professional equipment. · Load/unload materials. · Perform pressure washing on buildings, sidewalks, vehicles, and equipment. · Clean commercial kitchen exhaust hoods and related systems. · Assist with pavement marking and line striping projects. · Operate and maintain pressure washing, striping, and field service equipment. · Troubleshoot basic mechanical issues with tools and equipment. · Load, transport, and unload materials at job sites. · Follow safety procedures and company guidelines at all times. · Work outdoors in varying weather conditions and environments. · Other related duties and responsibilities as assigned. Required Skills & Abilities: · Ability to travel from one site to another as required. · Valid driver's license required with a clean driving record. · Dependable, punctual, and able to manage time efficiently Education & Experience: · Highschool diploma or GED preferred. · Prior pressure washing or similar field service experience is a plus Physical Requirements: · Ability to lift 50–70 pounds and perform physical labor Special Requirements: · Due to the nature of our business, you may be required to work extended or unusual work hours when necessary and in case of emergency, including holidays and weekends. · Must be at least 21 years old to qualify. · Must pass a background check and motor vehicle record check. Benefits Offered to Full-Time Employees: · Health Insurance · Dental Insurance · Vision Insurance · PTO · Paid Holidays · 401K An Equal Opportunity Employer We are an Equal Employment Opportunity Employer and do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Fleet Maintenance Manager (Class 8 equipment) : Up to $120,000 annually PLUS Bonus. Fleet Maintenance Manager (Class 8 equipment) Requirements. Heavy Equipment Class 8 and Trailer Refrigeration Fleet Maintenance, including their designs, uses, repair, and maintenance.

Job DescriptionService Technician Commercial Restaurant Equipment • Full-time. www.hobartservice.com/careers Company Description:Hobart Service, an Illinois Tool Works Company, has been in business for over 125 years and is the trusted source for Commercial Food Equipment Service Solutions. We have over 1,700 associates nationwide who serve as valued partners to our customers. Our employees are dedicated to providing the best customer service, giving back to the communities where they live and work, and demonstrating the ITW values of Integrity, Simplicity, Trust, Respect, and Shared Risk. Job Description:Are you mechanically and electrically inclined? Do you like providing customers with quality service solutions? Join our team and become a part of the leading nationwide provider of commercial food equipment service. • You will work with customers to electrically/mechanically troubleshoot, diagnose, repair, and maintain a variety of commercial food equipment including cooking, food preparation, ware washers, weigh wrap, baking, and refrigeration., • You will typically leave from home each morning and work with minimal direct supervision at customer sites., • You will meet or surpass weekly productivity and customer-oriented goals while maintaining a high level of customer service. Qualifications:What you’ll bring to the table: • An accredited High School Diploma or GED and 0-2 years of similar electrical/mechanical experience., • You must have a valid Driver’s License and the ability to drive multiple hours daily., • You should be able to work Overtime and On-Call as required., • You must be able to attend our industry-leading training at our corporate headquarters in Troy, OH. Additional information: Why work for us? • Competitive pay., • Great insurance options with low premiums., • Paid vacation and holidays., • 401K with company match., • Extensive on-the-job, online, and classroom training., • Service vehicles, uniforms, and safety equipment provided., • Safety-conscious work environment. Hobart Service is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. ITW and Hobart Service are committed to providing a healthy and safe environment for all employees. To demonstrate this commitment, Hobart Service is tobacco-free (including e-cigarettes) on campuses and within company vehicles and maintains a drug-free workplace. If you are a qualified individual with a disability and are unable or limited in your ability to use or access the online application system process due to your disability, please contact Human Resources at service.hr@hobartservice.com to request assistance. No other requests will be acknowledged. ITW is an equal-opportunity employer. We value our colleagues’ unique perspectives, experiences, and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local laws.