Trabajos software engineer en Midland, TexasCrear alertas

The Senior Unified Communications Engineer provides technical direction within the team and across the Information Technology department. Assists peers and mentors less experienced team members through the application and sharing of technical knowledge, guidance, and direction. Synthesizes analysis, identifies root causes, develops, and recommends key work products. Delivers technical solutions for network and voice (Unified Communications) infrastructure, including LAN, WAN, cellular, and Wireless. Develops, manages, and tests disaster recovery solutions. May lead complex evaluation, development, implementation, integration, and administration of internal and external business solutions. Advises management on issues. Supports the mission, vision, values, and strategic goals of Midland Health. This document represents the major duties, responsibilities, and authorities of this job, and is not intended to be a complete list of all tasks and functions. Other duties may be assigned. SHIFT AND SCHEDULE Full Time: 8:00 AM – 5:00 PM ESSENTIAL FUNCTIONS/PERFORMANCE EXPECTATIONS • Change and Release Management: Applies sound IT production and change management methods to all areas of Information Technology. Actively communicates changes within the IT infrastructure to all affected parties proactively and in an effective manner. Follows and documents strict testing and deployment methodologies for all systems., • Disaster Recovery/Business Continuation: Follows the processes and maintains appropriately available network operations environment with primary focus being on EMR, HIM, Finance, HR, Supply Chain, and email systems. This includes controlled observation and evaluation of new technologies and methodologies. Testing plans and documentation are required., • Capacity, Configuration and Architecture Management: Develops a maturing level of understanding of the Midland Health Cisco LAN, WAN, phone, PBX, Wireless, and firewall environments. Responsible for installing and maintaining all MDFs and IDFs. Adheres to all standards and configurations. Manages system capacity using monitoring tools and statistical analysis. Contributes to system life cycle recommendations and funding requests. Works with the Service Desk staff to provide support on-site 24/7., • Availability/Incident Management: Responsible for the timely resolution of problems on information technology systems hardware and software. This includes maintaining the system operations in accordance with all regulatory requirements with primary focus on confidentiality and HIPAA Security Regulations. This also includes solving issues related to Disaster Recovery, AD, DNS/WINS, DHCP, Cisco IOS, Cisco phones, voice mail, WAN, and firewalls., • Priority Management: Must manage several assignments at one time, balancing resources, priorities, deadlines, and time. The work is highly technical, requiring collaboration across multiple disciplines and groups. The ability to work independently is also required. Communicates priorities to the team., • Daily Operations:, • Resolve assigned support and service requests in a timely, effective, and courteous manner, using tools and documentation., • Perform maintenance activities in pursuit of all general responsibilities specific to, • Participate in assigned meetings, committees, in accordance with assigned responsibilities., • Participate in projects at a level in accordance with respective job, • Contribute to the departmental knowledge base, to improve documentation of existing systems and problem resolutions., • Coordinate productively with other hospital employees, including those within and outside the Information Technology department., • Provide routine updates on ongoing tasks and projects to, • Identify, research, and implement areas of improvement within the areas of, • Provide excellent customer service to all stakeholders who rely on service from the Information Technology, • Complete tasks in a timely and effective manner as, • Act as general support for Unified Communications, • Participate as a subject matter expert in assigned To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Requires a high level of analytical ability to find solutions to increasingly difficult technical or administrative problems, to determine economic feasibility or options available, and to assess time involved in system changes. Thorough documentation skills are also required., • Must be able to demonstrate experience with Cisco IOS, AD, DHCP, DNS, FTP, TFTP, SMTP, SNMP, network hardware facilities and experience with system design, capacity planning and capacity management., • Must be able to demonstrate experience with Cisco system design, Cisco wireless phones, 3rd party PBX systems, PRI/Smart trunk configuration, NXX number plans and trunk routing, capacity planning and capacity management., • Requires hands-on expertise with Cisco equipment, firewalls, cable infrastructure and WAN circuits., • Must be able to communicate the impact and solutions of application/system problems in business language., • Requires a professional approach in all situations., • Ability to work any hours to support 24/7 operations., • Must resolve problems entirely by either completing the work or gathering all the resources needed for ultimate resolution and continuity of problem management., • Availability to travel onsite as needed. EDUCATION AND EXPERIENCE • Bachelor Science in Computer Science, Information Systems, Computer Engineering, or related field or equivalent work experience., • 6+ years of relevant business support and/or information technology support experience., • CCNA, CCNP required, • Cisco VOIP training required, • CCIE preferred PHYSICAL REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The individual must be able to: • Stand, walk, sit, stoop, reach, lift, see, speak and hear. Lifting is limited to 35 lbs. for clinical staff and to 50 lbs. for non-clinical staff. The individual must use an assisted-lift device or get another individual(s) to assist with the lift that is over these maximum limits.

Project Engineer - Industrial & Commercial Construction - Rock Island, IL This Jobot Job is hosted by: Kelly Anne Wight Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $60,000 - $75,000 per year A bit about us: We are a well-established construction company with deep roots in the Quad Cities area, known for delivering high-quality projects across commercial, industrial, and public sectors. Our team takes pride in combining technical expertise with a commitment to integrity, safety, and community impact. Every project we take on reflects our dedication to building lasting relationships and structures that stand the test of time. Why join us? As a Project Engineer, you’ll be part of a collaborative, growth-focused team that values hands-on learning and professional development. We believe in empowering our employees with the tools, mentorship, and opportunities they need to succeed. This role is a chance to build your career with a company that cares about your future while contributing to projects that make a tangible difference in our region. Job Details Responsibilities: • Support Project Managers and Superintendents in planning, coordinating, and executing construction projects., • Assist with project documentation, cost tracking, scheduling, and subcontractor coordination., • Review drawings, specifications, and contracts to ensure accuracy and compliance., • Monitor project progress, identify potential challenges, and help implement solutions., • Bachelor’s degree in Construction Management, Civil Engineering, or a related field (or equivalent experience)., • Strong organizational, communication, and problem-solving skills., • Proficiency in construction software and Microsoft Office Suite., • Eagerness to learn and grow in a fast-paced, team-oriented environment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Key Responsibilities** - Create high-quality training examples consisting of an image, a code-related prompt, and an ideal response - Write, debug, and explain code based on visual inputs such as screenshots, error tracebacks, architecture diagrams, flowcharts, and UI mockups - Generate working code

What you’ll build** - AI-native platform (core entities, workflows, permissions, multi-tenant foundations) - Omni-tool integration layer (connectors to common tools; event ingestion; sync; actions) - Real-time analytics dashboard (live metrics, drill-downs, exports) - **MCP-compatible

What You'll Do** - Design realistic, multi-step Grafana workflows - dashboards, alerting rules, data source configuration, panel setup, cross-module operations - Perform each workflow yourself on a hosted Grafana instance to produce a reference trajectory - Write clear, specific task prompts wit

Date Posted: 2026-02-27 Country: United States of America Location: US-GA-MIDLAND-MPC ~ 8801/8987 Macon Rd ~ BLDG MPC Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance Type: None/Not Required Security Clearance Status: Not Required Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: Pratt & Whitney’s Columbus Forge Blades Module Center (CFB) is seeking an experienced Principal Product Manufacturing Engineer to join our Manufacturing Engineering team. The Principal Product Manufacturing Engineer will provide support to manufacturing operations and drive process improvement to improve the company’s quality and delivery signature utilizing quality metrics and MRL elements such as PFMEA, Control Plan & Gage R&R as needed. The Principal Product Manufacturing Engineer will be responsible for a specific part or part family. The scope of this role will include PW internal shop and may also include supply chain support components. With specific parts ownership, this role will provide support to the business for identifying and implementing manufacturing process improvements across multiple process steps that span the full manufacturing value stream of the assigned parts. As a key member of the Integrated Product Team (IPT), and the primary manufacturing point of contact (POC) for a specific part family, the role will engage Process Manufacturing Engineers, Design Engineers, Project Engineers, Quality Engineers, and Structural Engineers to meet our delivery commitments to the customer. Identify, track, and coordinate execution of projects that support reducing Cost of Poor Quality, and improve operational capacity using project management skills in a multi-disciplined environment Drive targeted manufacturing process optimization activities using Manufacturing Readiness Level (MRL) tools such as Process Flow Diagram, PFMEA, Process Control Plans, Measurement Systems Analysis, Yield & Cost curves, etc. Drive Key Product Characteristics (KPC) Management and Production Part Approval Process (PPAP) elements for increasing First Pass Yield across the Manufacturing Value Stream Identify & implement process optimization & process control methods to eliminate quality turn backs/escapes and reduce overall product costs through the specific process. Perform Root cause analysis and corrective actions on non-conforming products for responsible processes using statistical analysis tools and other methods as necessary Support the project pipeline process to select, prioritize and scope projects to business objectives, integrated with other continuous improvement activities and ACE/CORE initiatives. Schedule and facilitate periodic project reviews and ensure validation. Use effective scorecards and metrics to ensure progress. Lead significant projects critical to improve manufacturing process capability & quality performance through the assigned processes Qualifications You Must Have Bachelors degree in Engineering and 8 or more years of experience in an engineering, manufacturing operations, quality or related work environment OR a Masters degree and 5 experience or more years of experience in an engineering, manufacturing operations, quality or related work environment Experience managing multiple projects with competing priorities in a constantly fluctuating work environment Experience reading and interpreting blueprints Demonstrated technical proficiency in complex manufacturing activities Demonstrated experience leading and managing a portfolio of cross functional projects Proficient with Microsoft Office products Qualifications We Prefer: Degree in mechanical/aerospace/manufacturing engineering Six Sigma project leadership/management/coaching experience Understanding of Quality Procedures, Quality Management Systems and/or experience using CORE tools/continuous improvement tools such as Six Sigma and LEAN Project management tools experience (MS Projects) Experience with PW software tools like Solumina, and SAP Experience in using UG/NX, and Team Center software suites Experience in using Minitab and other statistical software for analysis Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-16 Country: United States of America Location: US-GA-MIDLAND-MPC ~ 8801/8987 Macon Rd ~ BLDG MPC Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance Type: None/Not Required Security Clearance Status: Not Required Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future. Are you ready to go beyond? What You Will Do: The Pratt & Whitney Columbus Forge Blades (CFB) Module Center Manufacturing Engineering Organization is seeking a Process Manufacturing Engineer to support CFB for machining processes. Responsible for all aspects of machining processes and standing up new machining processes from the ground up including fixturing, process tryout, work instruction, standard work, and gaining engineering source approval. Develop and implement plans that are in line with the business strategy to further our world class technology portfolio; provide operational engineering support to develop technologies and processes which support the growth curve and cost reduction targets. Leverage manufacturing innovations to improve cost, delivery, and quality of aerospace blade forgings; assist with problem solving during manufacturing related investigation; own relentless RCCA for correcting non-conformance in the part families. Optimize, automate and trim waste; maintain work instructions applicable to machining processes including but not limited to grinding, milling, and EDM. Support operational excellence using statistical analysis for process control and certification; develop blade process using statistical methods that meet or exceed the business objective for process control; provide focused & effective leadership in eliminating EH&S/Ergonomics/Human Factors risks and addressing quality issues. Qualifications You Must Have: Bachelor’s degree in Engineering or closely related technical discipline and 2 or more years experience in an engineering, manufacturing operations, quality or closely related environment or a Masters degree and at least 1 year in an engineering, manufacturing operations, quality or closely related environment Working knowledge of Microsoft Office computer software including MS Word, Excel, PowerPoint, and Outlook Experience managing multiple projects with competing priorities in a constantly fluctuating work environment Qualifications We Prefer: Degree in aerospace, industrial, mechanical or manufacturing engineering Understanding of continuous improvement tools such as Six Sigma and LEAN concepts Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-02-18 Country: United States of America Location: US-GA-MIDLAND-MPC ~ 8801/8987 Macon Rd ~ BLDG MPC Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Must be authorized to work in the U.S. without the company’s immigration sponsorship now or in the future. The company will not offer immigration sponsorship for this position. The company will not seek an export authorization for this role. Security Clearance Type: None/Not Required Security Clearance Status: Not Required Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: The Reliability Engineer will be reporting to the MTS leader and will be working in coordination of the Planner/Unplanned and Materials Technician. This will be a very data driven role, requiring updates/reports and analysis based on the request of management. The Reliability Engineer will play a critical role in asset management and machine sustainability. Asset Management: Review planned maintenance activities, categories machine criticality, assist setting part Min/Max Ratios. Asset identification, critical spares lists, DWA approvals Reliability Analysis: Conduct formal analyses to identify potential failure modes and impact, as well as assist any concerns/updates to daily walk around program. Root Cause Analysis: Investigate root causes of failures (RCCA) and develop strategies to prevent future occurrences Maintenance Integration: Recommend, develop and implement maintenance strategies designed to optimize reliability and minimize downtime. Reliability Testing: Conduct tests and validations to assess system, equipment, and process reliability under various conditions Data Analysis: Analyze equipment performance data, maintenance records, and cost. Continuous Improvement: Identify opportunities to improve maintenance/workflows, resource utilization. Training/skills gaps identification and solutions Predictive Maintenance: Assist Op X team if needed or any related Predictive Maintenance tasks or projects in relation to sustainability, predictability and overall machine health. OEE ( Overall equipment/ Maintenance effectiveness)- Reports generated based on meantime between failure/ average response time/repair and reoccurring issues. Qualifications You Must Have: Bachelors degree in Engineering and minimum 5 years’ experience in an engineering, manufacturing operations, continuous improvement, quality or closely related industrial environment or a Masters degree and minimum 3 years experience in an engineering, manufacturing operations, continuous improvement, quality or closely related industrial environment Demonstrated technical proficiency in complex manufacturing activities Understanding of Lean Manufacturing principles (Kaizen events or experience with a continuous improvement programs) Knowledge of Microsoft Office computer software including Word, Excel, PowerPoint, and Outlook Qualifications We Prefer: Proficient in SAP Familiar with Total Productive Maintenance (TPM) principles Predictive Maintenance experience Project Management experience Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Growing Engineering Firm | Great Compensation Package | Upwards Career Growth! This Jobot Job is hosted by: Lauren Lehman Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $75,000 - $100,000 per year A bit about us: We are working with a growing engineering firm who is searching for a Civil Land Engineer. This position will develop conceptual and detailed design plans using Civil 3D that ensure functionality and performance for the client’s project requirements aimed at assuring project quality and accuracy of construction deliverables. Position must have sufficient ability to interact, build rapport and communicate clearly with clients, municipalities and fellow employees. This position requires sufficient proficiency, knowledge and understanding of all job responsibilities while completing multiple tasks on time. Apply today to learn more! Why join us? • Upwards Growth!, • Excellent Benefits!, • Great Compensation Package!, • Must be fine with 10 - 20% travel Job Details Responsibilities: 1. Manage and lead land development projects including residential, commercial, and industrial site development., 2. Review potential land development sites and perform feasibility studies, including site visits., 3. Prepare and present detailed reports on the feasibility, environmental impact, cost, and timelines of projects., 4. Design infrastructure components for projects, including grading, storm water management, sanitary sewer, and water distribution systems., 5. Coordinate with architects, contractors, and other engineering disciplines to ensure project goals are met., 6. Apply for and secure necessary permits and licenses for projects., 7. Conduct soil testing to determine the adequacy and strength of foundations., 8. Test building materials, such as concrete, asphalt, or steel, for use in particular projects., 9. Provide cost estimates for materials, equipment, or labor to determine a project’s economic feasibility., 10. Use design software to plan and design transportation systems, hydraulic systems, and structures in line with industry and government standards., 11. Perform or oversee surveying operations to establish building locations, site layouts, reference points, grades, and elevations to guide construction. Qualifications: 1. Bachelor’s degree in Civil Engineering or a related field., 2. A minimum of 5 years of experience in civil engineering with a focus on land development., 3. Professional Engineer (PE) license is highly desirable., 4. Proficient in the use of design software such as AutoCAD, Civil 3D, and other related software., 5. Extensive knowledge of construction materials, engineering practices, and mathematics., 6. Strong project management skills with the ability to lead and manage multiple projects simultaneously., 7. Excellent communication and interpersonal skills, with the ability to present complex information clearly and concisely., 8. Strong problem-solving skills, with the ability to anticipate and mitigate potential issues before they arise., 9. Familiarity with local, state, and federal land use laws and regulations., 10. Ability to work effectively in a team environment and collaborate with a diverse range of professionals., 11. Physical stamina and ability to work on construction sites under varying weather conditions., 12. Valid driver’s license and willingness to travel as needed for site visits and client meetings. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking an Integration Engineer with strong expertise in Radio Access Network (RAN) and RF systems, paired with hands-on experience debugging RF setup issues. This role is responsible for validating and troubleshooting communication systems within a satellite end-to-end environment, ensuring network performance, reliability, and compliance with design expectations. The ideal candidate brings a balanced skill set across RAN technologies and RF fundamentals, along with practical experience using advanced RF and communication test equipment. Key Responsibilities: • Perform hands-on testing and validation of communication systems and RAN components in both lab and field environments, • Debug and resolve RF setup issues, including antenna configurations, signal integrity, and end-to-end RF chain problems, • Analyze and interpret lab and field test data to identify defects, root causes, and performance improvement opportunities, • Collaborate closely with system engineers and software developers to validate new software releases and features Education: • Strong RF fundamentals with demonstrated hands-on debugging capability, • Working knowledge of 3GPP protocols and procedures, including RRC, RLC, MAC, and PHY layers, • Experience using Python and MATLAB for test automation and data analysis, • Familiarity with industry-standard tools such as XCAL, UE Simulators, Viavi, and QXDM, • Strong analytical and problem-solving skills for complex RF and communication system challenges, • Proven ability to collaborate effectively within cross-functional engineering teams, • Excellent written and verbal communication skills, • RF Test & Debug Equipment: Spectrum analyzers, signal generators, oscilloscopes, network analyzers, • Log Analysis & Diagnostics: QXDM, • Automation & Data Analysis: Python, MATLAB, • Ability to work in laboratory environments and perform hands-on RF testing for extended periods, • Ability to use a computer and test equipment for extended durations, • Occasional travel required for field testing and validation activities AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Summary: The Associate Electrical Test Engineer is responsible for the development and execution of tests to ensure the quality of our products. Additionally, is responsible for analyzing the product features, test requirements, creating customized quality checks, and writing up final test procedures for the approval of the sub-system lead engineer. Test engineer is also responsible for the execution of the test procedure as well as for preparing the test report. Broad-based knowledge of engineering and product design, a good eye for detail, and the ability to think out of the box are important requirements for this role. Duties and Responsibilities: • Meeting with the product design team and sub-system lead engineers to determine product testing requirements., • Writing test plans, test procedures and developing test processes to maturity., • Execution of the test procedure., • Training of technical staff and providing technical support when needed., • Development, evaluation and implementation of automation into test processes wherever possible., • Ensuring all tests and procedures meet company and industry standards., • Preparing test reports for management., • Bachelor's degree in Electrical, Mechatronics, Aerospace or Computer engineering field or Associates Degree in Electrical Engineering with 2 years of direct experience, • Flexibility/adaptability in a fast-paced & dynamic environment., • Excellent English written and verbal communication skills., • U.S Citizen or Permanent Resident., • Experience in a research, development, test or other laboratory environment., • Experience with common laboratory software (LabView, Ansys, MATLab etc)., • Experience with test automation., • Familiarity with general purpose electronics test equipment: power supplies, digital multimeters, source meters., • Familiarity with battery systems, and battery cycling equipment., • Familiarity with photovoltaic (PV) solar cells and their design, test or manufacturing processes., • Familiarity with environmental test chambers, vibe table., • Experience in quality control or inspection of complicated electronics, particularly those used for aerospace or defense applications.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview The Software Test Engineer designs, develops, tests, and maintains software systems that support satellite development, ground systems, and operational infrastructure. This role applies strong engineering and analytical principles to create reliable, scalable, and high-performance software solutions used in mission-critical aerospace systems. Working closely with cross-functional teams including electrical, RF, avionics, and systems engineering, the Software Engineer contributes to the development of software that supports spacecraft development, testing, and operations. This role requires strong programming fundamentals, a systems-level mindset, and the ability to solve complex technical problems in a fast-paced engineering environment. Key Responsibilities • Design, develop, test, and maintain software applications supporting spacecraft systems, ground infrastructure, and engineering tools., • Analyze system requirements and user needs to design software solutions that meet performance, reliability, and operational objectives., • Develop modular, maintainable software components that integrate effectively within larger system architectures., • Collaborate with engineering teams to support system integration, testing, and operational readiness., • Troubleshoot, debug, and resolve software issues identified during development, testing, or operational use., • Contribute to system architecture discussions and recommend improvements to existing software and system designs., • Develop technical documentation including software design descriptions, diagrams, flowcharts, and development artifacts., • Support software verification and validation activities including unit testing, integration testing, and system-level testing. Education • 1+ years of professional experience in software development or related engineering work., • Experience developing software for aerospace, satellite, or other high-reliability engineering systems., • Familiarity with distributed systems, telemetry systems, or data processing pipelines., • Experience working in Linux development environments., • Strong analytical and critical thinking skills with the ability to translate requirements into technical solutions., • Excellent problem-solving abilities and attention to detail., • Strong communication skills with the ability to clearly explain technical concepts to cross-functional teams., • Ability to work effectively in a fast-paced, collaborative engineering environment., • Programming Languages: Python, Ruby, C#, or similar modern programming languages, • Development Tools: Version control systems (e.g., Git) and collaborative development platforms, • Operating Systems: Linux-based development environments, • Ability to sit and work at a computer workstation for extended periods. Employment eligibility may require compliance with U.S. export control regulations. Candidates must be a U.S. citizen, lawful permanent resident (green card holder), or otherwise authorized to work in the United States. This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description We are looking for a highly skilled System Integrator/Controls Engineer to support our land-based operations. The successful candidate will be responsible for the design, configuration, maintenance, and troubleshooting of PLC based control systems and associated HMI/Scada applications. Core Competencies: • High level problem solving., • Skilled in PLC programming and HMI/Scada configuration., • PLC based control panel design., • Self-Starter. Ability to work alone or as part of a team with little involvement from management., • Allen Bradley PLC/Rockwell Software experience is a must. Wonderware and Ignition experience a plus., • Configuration of wired and wireless Ethernet and serial networks., • Ability to read and interpret electrical schematics, P&IDs, and technical manuals., • Office environment with travel to industrial sites for system commissioning, troubleshooting, etc., • Field work may involve travel to anywhere in the continental US, but mostly limited to Texas, Louisiana, Oklahoma, and New Mexico., • Competitive salary based on experience., • Paid time off – Holidays & Vacation, • Insurance includes medical, dental, vision, long term, short term, accidental, & critical, • 401K with company match, • Company paid and voluntary life insurance Pay: $90,000.00 - $120,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Monday to Friday, • On call Logic Control Systems has constructed a team of professionals that have over 150 years of experience in the field. Each member of Team Logic is dedicated to producing solutions that do not just get the job done but that surpasses our customers’ expectations. Our team prides itself on the commitment to consistently developing our knowledge, skills, and adaptability to provide our customers with expertise, high quality service and maximum efficiency to help reduce cost.Founded in 2007, Logic Control Systems specializes in providing a wide range of Instrumentation, Electrical, Pneumatic and Automation solutions to a broad variety of industries throughout the world at a competitive price.\r\n\r\nLogic Control Systems has constructed a team of professionals that have over 150 years of experience in the field. Each member of Team Logic is dedicated to producing solutions that do not just get the job done but that surpasses our customers’ expectations. Our team prides itself on the commitment to consistently developing our knowledge, skills, and adaptability to provide our customers with expertise, high quality service and maximum efficiency to help reduce cost.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a highly hands-on RF Assembly, Integration, and Test (AIT) Engineer to execute, integrate, test, and debug flight RF hardware supporting a fast-paced LEO satellite program at AST SpaceMobile. This is a hardware-centric execution role. The selected candidate will personally build, integrate, verify, troubleshoot, and support RF systems from bench validation through launch operations. You will partner directly with TT&C and GPS design leads who own system architecture and requirements, translating released designs into robust, flight-ready hardware. This is not a documentation or coordination position — it is a build, test, and fix role. Key Responsibilities RF Assembly, Integration & Test Execution • Execute integration and verification testing for TT&C and GPS flight hardware., • Own hands-on integration and test of:, • Flight radios and transceivers, • Flight antennas, • RF harnessing and coaxial assemblies, • AIT RF racks and ground support equipment (GSE), • Work directly from released schematics, ICDs, and mechanical interfaces., • Personally drive RF hardware build, inspection, integration, and rework activities., • Fabricate, inspect, and validate:, • Coaxial cable assemblies, • Connector terminations (SMA, TNC, N-type, etc.), • Harness routing, clamping, torque application, and strain relief implementation, • Maintain active presence on the manufacturing floor during hardware builds., • Partner with manufacturing engineers and technicians to ensure workmanship standards., • Design, assemble, and sustain AIT RF racks and associated test infrastructure., • Execute and continuously improve:, • RF functional testing, • End-to-end TT&C and navigation test configurations, • Return loss, insertion loss, isolation, power output, and sensitivity measurements, • Develop and maintain RF test automation:, • Automate repetitive RF test sequences and structured data capture, • Improve repeatability, throughput, and configuration traceability, • Support environmental and system-level testing including:, • Thermal vacuum (TVAC), • Vibration, • Thermal cycling, • Spacecraft integrated testing, • Own RF anomaly resolution:, • Debug harness, connector, and integration defects, • Identify workmanship-induced damage, • Isolate EMI/RFI coupling issues under schedule pressure, • Execute formal acceptance testing per released procedures and qualification requirements., • Review test data packages, close discrepancy reports, and verify flight readiness., • Support launch site operations, including last-minute RF troubleshooting and configuration validation. What Winning Looks Like • RF hardware integrates cleanly and predictably in AIT., • Issues are identified early, debugged efficiently, and closed with permanent corrective action., • RF systems perform consistently from bench validation → environmental test → launch → orbit. Education • Strong practical RF experience across common TT&C frequency bands., • Demonstrated hands-on experience with:, • RF assemblies and coax harness fabrication, • Antennas and RF subsystems, • RF test equipment (VNA, spectrum analyzer, power meters, signal generators), • Experience supporting AIT, environmental test campaigns, and production manufacturing., • Comfortable operating in cleanroom, laboratory, and factory environments., • Direct LEO satellite RF or TT&C integration experience., • Launch base or on-orbit support exposure., • Experience supporting multiple flight vehicles in parallel., • High ownership mentality with strong bias toward execution., • Detail-oriented while maintaining schedule awareness., • Pragmatic decision-making in ambiguous or data-limited environments., • Collaborative across design, manufacturing, and test organizations., • Vector Network Analyzers (VNA), • Spectrum Analyzers, • RF Signal Generators, • Power Meters, • RF Switching Matrices, • Automated Test Software (Python, LabVIEW, or equivalent), • Ability to work extended periods in cleanroom and lab environments., • Frequent hands-on bench work requiring fine motor skills., • Ability to lift and maneuver test equipment and RF racks (up to 40 lbs).

Job DescriptionJob Title: Mobile Building Engineer / Facilities Maintenance Compressor Technician Job Description The Mobile Building Engineer / Facilities Maintenance Compressor Technician plays a critical role in maintaining the reliability, safety, and performance of compressed air systems, HVAC, and building infrastructure across multiple facilities. This role supports plant and facility operations by performing preventive and corrective maintenance, troubleshooting mechanical and electrical systems, and assisting with equipment installations and upgrades. As a key contributor to operational excellence, this position promotes a safe work environment, maintains essential building systems, and ensures the integrity and functionality of facilities that support core business operations. Responsibilities • Perform preventive and corrective maintenance on air compressors, vacuum pumps, and associated mechanical systems to ensure safe and reliable operation., • Troubleshoot and repair advanced air compressor and vacuum pump issues, diagnosing mechanical and control-related problems efficiently., • Conduct HVAC diagnostics and repair on rooftop units (RTUs) and other climate control equipment to maintain proper building temperature and air quality., • Troubleshoot and repair mechanical systems including motors, pumps, and fans to minimize downtime and maintain production support., • Perform basic electrical repairs and apply a solid understanding of electrical systems, including working safely around 480 volts where required., • Maintain and repair plumbing systems, including drains, piping, and fixtures, to support facility operations., • Provide building systems maintenance, including work on doors, finishes, drains, roofs, lighting, and ballast replacements., • Support fire and life safety systems, including alarms, pumps, and suppression equipment, to help ensure regulatory compliance and occupant safety., • Use a Computerized Maintenance Management System (CMMS) to receive, complete, and document work orders, maintenance activities, and parts usage., • Coordinate and oversee contractors and vendors performing work on-site, ensuring safety, quality, and adherence to facility standards., • Respond to maintenance requests and equipment issues with a strong safety mindset, sense of urgency, and effective problem-solving skills., • Assist with installation, commissioning, and upgrades of facility and plant equipment, including compressed air systems and building systems., • Inspect facility systems regularly to identify potential issues and recommend corrective actions before failures occur., • Work independently as a mobile technician across multiple locations, prioritizing tasks and managing time effectively., • Communicate clearly with operations, plant personnel, and leadership regarding equipment status, repair needs, and maintenance plans., • Support overall facility upkeep through general repair work such as carpentry, painting, and minor building improvements as needed.Essential Skills, • Minimum 5 years of experience in a commercial or industrial cement or bulk plant environment., • 2–3 years of experience in commercial or industrial facility maintenance., • Technical vocational training or on-the-job experience with air compressor systems and vacuum pumps., • Technical vocational training or experience in HVAC, electrical, mechanical, or plumbing disciplines., • Strong proficiency in advanced air compressor and vacuum pump troubleshooting., • Experience with HVAC diagnostics and repair, including rooftop units (RTUs)., • Mechanical system troubleshooting skills, including motors, pumps, and fans., • Basic electrical repair skills and solid understanding of electrical systems, including working safely around higher voltages such as 480 volts., • Plumbing system maintenance and repair capabilities., • Building systems maintenance experience, including doors, finishes, drains, roofs, and general facility components., • Familiarity with fire and life safety systems, including alarms, pumps, and suppression systems., • Proficiency using CMMS (Computerized Maintenance Management Systems) for work orders and documentation., • Ability to coordinate and interface with contractors and vendors on maintenance and repair projects., • Proficiency with Microsoft Office applications, including Outlook, Excel, and Word., • Valid driver’s license with a clean driving record to support travel between sites., • High school diploma or GED., • Demonstrated safety mindset, urgency, and strong problem-solving skills in an industrial environment.Additional Skills & Qualifications, • Associate degree or completion of a technical school program in a related field is preferred., • Current EPA certification is preferred, or willingness to obtain within a defined timeframe., • Experience in facilities maintenance, including carpentry, painting, and general repair work., • Hands-on experience with facility lighting systems and ballast replacements., • Ability to work independently as the primary or sole maintenance resource on-site when needed., • Comfort working in cement or bulk plant environments, including exposure to dust, noise, and heavy equipment., • Strong organizational skills for managing multiple work orders, priorities, and travel between locations., • Effective communication skills for interacting with operations teams, vendors, and other stakeholders.Why Work Here? This opportunity offers the chance to take ownership of critical facility systems and see the direct impact of your technical expertise on safe, efficient operations. You work in a role that values independence, problem-solving, and craftsmanship, with exposure to a wide variety of mechanical, electrical, HVAC, and building systems that keep each site running. The position provides variety in your day through work at multiple locations and a mix of preventive maintenance, troubleshooting, and project support, helping you continuously grow your skills. You join a culture that prioritizes safety, reliability, and professionalism, and supports ongoing development through hands-on experience with advanced compressed air and facility technologies. Work Environment This role operates in both office and industrial or warehouse environments, working indoors and outdoors in varying weather conditions. You will support multiple facilities within a regional area, including travel to locations such as New Mexico, Pecos, Midland, Odessa, and surrounding areas. The schedule requires the ability to start the workday as early as 6:00 a.m. and no later than 8:00 a.m., with the potential for extended hours, overtime, shift work, and on-call assignments during emergencies or high-priority situations. At times you may be the only maintenance staff member on duty, requiring comfort working independently in active industrial settings that may include noise, dust, and heavy equipment. Work involves frequent use of tools, ladders, and industrial equipment, as well as regular use of CMMS and standard office software for documentation and communication. Attire should be appropriate for industrial and field work, including safety gear suitable for plant and outdoor conditions. Job Type & Location This is a Contract to Hire position based out of Midland, TX. Pay and Benefits The pay range for this position is $25.00 - $34.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview The Engineering Development Program (EDP) is designed for exceptional recent graduates who want to develop hands-on expertise in spacecraft mechanisms and integration. Participants will work directly on the production floor supporting the assembly, integration, and testing (AIT) of spacecraft mechanisms and subsystems. Through this program, participants will gain deep practical experience with spacecraft hardware, build leadership skills, and progress through a structured career path: Engineering Technician → Associate Mechanisms Engineer → Mechanisms Engineer or Supervisor This program offers a rare opportunity to learn spacecraft hardware from the ground up, combining hands-on assembly and testing experience with early exposure to engineering decision-making, process improvement, and leadership responsibilities. Key Responsibilities Phase 1 – Engineering Technician Participants begin the program working hands-on with spacecraft mechanisms and AIT operations: • Perform assembly, integration, and alignment of spacecraft mechanisms and subsystems., • Support mechanical integration, bonding, adhesives, potting, and precision assembly processes per engineering procedures and workmanship standards., • Follow strict cleanroom protocols including ESD and FOD control., • Assist with vibration, shock, thermal vacuum (TVAC), and static load test campaigns., • Support quality inspections, verification, and troubleshooting of assembly/test issues. Upon demonstrating technical competence and leadership potential, participants transition into an associate engineering role: • Lead and provide technical guidance to teams performing mechanism assembly and integration., • Coordinate daily AIT activities to ensure milestones and quality targets are met., • Ensure technicians follow engineering procedures, quality standards, and cleanroom protocols., • Train and mentor junior technicians in AIT practices., • Support troubleshooting and root-cause investigations of anomalies or failures., • Participate in design and analysis activities to optimize mechanism performance and manufacturability., • Collaborate with production and engineering teams to drive process improvements and operational efficiency. After successful completion of the development program, participants may advance into: Option 1 – Mechanisms Engineer: • Design, analyze, and improve spacecraft mechanisms, interfaces, and AIT processes., • Support integration campaigns and cross-functional engineering projects., • Develop and validate tooling, fixtures, and procedures for production and test., • Collaborate with design engineering to incorporate production feedback into hardware improvements., • Supervise assembly and integration teams ensuring adherence to engineering specifications, quality standards, and production schedules., • Oversee daily production operations and manage personnel to meet key metrics (safety, quality, delivery, efficiency)., • Drive employee training, process auditing, and skills development., • Partner with engineering, quality, and operations leadership to resolve technical or production challenges. Qualifications Education • Recent graduate or early-career engineer, • Hands-on experience through internships, research labs, or academic projects involving mechanical assemblies, electronics, robotics, or hardware systems, • Experience with space-qualified mechanisms (release devices, actuators, hinges, latches, deployment systems), • Familiarity with root cause and corrective action (RCCA) processes, • Experience with vibration, shock, and TVAC testing, • Knowledge of bonding, adhesives, and precision assembly processes, • Participation in engineering projects, robotics competitions, or research teams Soft Skills • Strong curiosity and desire to understand complex hardware systems, • Demonstrated leadership potential and ability to guide technical teams, • Strong problem-solving mindset and attention to detail, • Excellent communication and collaboration skills, • Ability to thrive in a fast-paced engineering and production environment Technology Stack Engineering & Manufacturing Tools: • Precision mechanical assembly tools, • Adhesive and bonding application systems, • CAD: AutoDesk Inventor, SolidWorks, NX, or Creo, • PDM/PLM: Fusion or equivalent, • Ability to perform hands-on work with spacecraft hardware and precision instruments, • Ability to lift and move up to 25 lbs, • Ability to stand for extended periods during assembly and integration operations, • Work in cleanroom environments under strict ESD and FOD control protocols AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview The Engineering Development Program (EDP) is designed for exceptional recent graduates who want to become spacecraft engineers by first learning how satellites are physically built. Participants in this program will begin their careers working directly on the spacecraft production floor as Engineering Technicians supporting Environmental Test Operations. In this role, participants will gain hands-on experience integrating and testing subsystems and satellites to qualify and validate AST SpaceMobile satellites. As participants demonstrate technical capability and leadership potential, they will progress through a structured development path: Engineering Technician → Engineering Technician Supervisor → Associate Engineer This program provides a rare opportunity to develop engineers who understand spacecraft hardware from the ground up—combining hands-on spacecraft assembly experience, early leadership development, and a clear transition into an engineering role. Participants will gain direct experience testing flight hardware, leading technical teams, and supporting spacecraft production at scale. Key Responsibilities Phase 1 – Engineering Technician Participants begin the program working directly with spacecraft hardware supporting environmental test which includes Thermal Vacuum (TVAC), Vibration, Shock and Acoustics. Responsibilities include: • Perform Thermal Vacuum (TVAC) testing, including chamber setup, instrumentation routing, leak checks, pump-down operations, and test monitoring., • Operate vibration test systems (sine, random, shock) including fixture setup, software configuration, and accelerometer instrumentation., • Conduct environmental screening on subassemblies (thermal cycling, burn-in, thermal balance, etc.)., • Install, route, and verify test instrumentation including thermocouples, accelerometers, etc., • Validate data acquisition system (DAS) configuration and ensure accurate sensor readings., • Document test results, anomalies, and configuration changes in accordance with engineering and quality standards., • Support lifting, securing, and fixturing flight hardware using cranes, overhead hoists, and support equipment. Phase 2 – Engineering Technician Supervisor After demonstrating strong technical performance and leadership capability, participants will transition into a supervisory role supporting solar array production operations. Responsibilities include: • Lead Environmental Test Operations: Oversee daily activities including thermal-vacuum, vibration, shock, acoustic, and related tests, • Plan and Prioritize Work: Develop schedules, assign tasks, and adapt plans to meet shifting priorities and deadlines, • Develop and Maintain Documentation: Author, update, and train staff on test procedures, SOPs, and quality/process documentation, • Monitor and Report Metrics: Track staffing levels, throughput, and resource utilization; prepare performance reports for leadership, • Troubleshoot and Resolve Issues: Investigate test failures and non-conformances; perform root-cause analysis and implement corrective actions, • Ensure Compliance: Enforce health, safety, and environmental regulations across all operations, • Mentor and Develop Team: Provide training, performance feedback, and support hiring efforts to grow team capabilities, • Collaborate Cross-Functionally: Interface with design, manufacturing, supply chain, quality, and facilities teams; promote cross-training initiatives Phase 3 – Associate Engineer Upon successful completion of the development program, participants transition into an Associate Engineer role supporting spacecraft production and integration. Responsibilities include: • Perform Thermal Vacuum (TVAC), vibration, and shock testing on components, subsystems, and fully assembled satellites., • Coordinate logistics and scheduling with internal engineering teams and external test facilities., • Work with and oversee environmental test vendors during off-site testing campaigns., • Support test article instrumentation (e.g., thermocouples, accelerometers, strain gauges) and data acquisition system setup., • Analyze test data, interpret results, and provide actionable feedback to design and manufacturing groups., • Own, operate, and maintain internal environmental test infrastructure, ensuring compliance with safety protocols., • Lead root cause analysis and drive the resolution of test anomalies and failures., • Contribute to the continuous improvement of test processes, procedures, and documentation. Qualifications Education Bachelor's degree in one of the following fields: • Aerospace Engineering, • Mechanical Engineering, • Electrical Engineering, • Recent graduate or early-career engineer with strong academic performance., • Hands-on engineering project experience through internships, research labs, or academic programs., • Experience working with mechanical assemblies, electronics, robotics, or hardware systems preferred., • Experience working with mechanical assemblies, wiring harnesses, or electromechanical systems., • Exposure to aerospace manufacturing, spacecraft systems, or cleanroom environments., • Experience with bonding, adhesives, or precision assembly processes., • Strong curiosity and desire to understand how complex hardware systems are tested., • Demonstrated leadership potential and ability to motivate and guide technical teams., • Strong problem-solving mindset and attention to detail., • Excellent communication and collaboration skills. Engineering & Manufacturing Tools • Precision mechanical assembly tools, • Electrical harness installation equipment, • Microsoft Office Suite, • Ability to perform hands-on work with spacecraft hardware and mechanical assemblies., • Ability to stand for extended periods while performing integration and closeout operations., • Ability to work in cleanroom environments under strict ESD and FOD control protocols., • Ability to lift and move equipment up to 25 pounds as required for spacecraft integration tasks., • Position is based at the Midland, Texas facility and requires on-site collaboration with spacecraft production and engineering teams. This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a capable and energetic Environmental Test Engineer to validate our satellite's ability to survive the harsh conditions of launch and Low Earth Orbit (LEO). In this role, you will be responsible for the end-to-end planning, coordination, and execution of critical test campaigns. You will work closely with systems, mechanical, and electrical engineering teams to ensure mission readiness. The ideal candidate thrives in a fast-paced, dynamic environment and demonstrates strong ownership over their work, making a direct impact on the success of our rapidly growing business. Key Responsibilities: • Perform Thermal Vacuum (TVAC), vibration, and shock testing on components, subsystems, and fully assembled satellites., • Coordinate logistics and scheduling with internal engineering teams and external test facilities., • Work with and oversee environmental test vendors during off-site testing campaigns., • Support test article instrumentation (e.g., thermocouples, accelerometers, strain gauges) and data acquisition system setup., • Analyze test data, interpret results, and provide actionable feedback to design and manufacturing groups., • Own, operate, and maintain internal environmental test infrastructure, ensuring compliance with safety protocols., • Lead root cause analysis and drive the resolution of test anomalies and failures., • Contribute to the continuous improvement of test processes, procedures, and documentation. Education: Bachelor's degree in mechanical engineering, aerospace engineering, or a related technical field. Experience: • A minimum of 3 years of direct, hands-on experience in environmental testing of aerospace, defense, or other high-reliability systems., • Working knowledge of relevant environmental test standards (e.g., NASA GEVS, MIL-STD-810)., • Demonstrated proficiency with TVAC chambers and vibration tables (sine/random)., • Ability to read and interpret mechanical drawings, electrical schematics, and technical specifications., • Excellent mathematical, analytical, and problem-solving skills., • Direct experience with environmental testing of satellites or spacecraft., • A proactive and accountable approach to managing projects from planning to completion., • The ability to thrive and prioritize effectively in a fast-paced, dynamic R&D and manufacturing environment., • Strong interpersonal skills to work effectively with cross-functional engineering teams and external vendors., • A methodical and analytical mindset for troubleshooting complex test anomalies., • NASA GEVS, MIL-STD-810, • TVAC Chambers, Electrodynamic Shakers (Vibration Tables), Shock Test Systems, Data Acquisition (DAQ) Hardware, • Accelerometers, Thermocouples, Strain Gauges, Force Sensors, • Ability to stand and walk for extended periods in a lab environment., • Must be able to lift and carry test equipment and components up to 40 pounds., • Manual dexterity required to handle and install sensitive instrumentation and cabling., • Ability to work in an environment with moderate noise levels from test equipment., • Visual acuity to read schematics and inspect small components. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking an Associate Electrical Engineer to join our team. This role involves working closely with senior engineers to design and test electrical harnesses for satellites and associated ground support equipment. The ideal candidate is detail-oriented, collaborative, and eager to contribute to cutting-edge aerospace projects. Key Responsibilities • Collaborate with engineering teams to design, test, and support the integration of electrical harnesses for spacecraft and ground systems., • Create detailed electrical schematics, select wiring, connectors, back shells, and other harness components, ensuring compliance with company and industry standards., • Develop and execute test plans to verify functionality, reliability, and performance of electrical harness systems., • Conduct thorough testing and validation procedures, analyze test data, and troubleshoot issues to meet design requirements., • Prepare comprehensive technical documentation, including interface control documents, system schematics, block diagrams, harness drawings, and installation procedures. Education: Bachelor's degree in electrical engineering, Mechanical Engineering, or a related field. Experience: A minimum of 0–2 years of industry experience or recent graduate with hands-on project experience. Preferred Qualifications • Knowledge of space environment and industry standards., • Understanding of harness design principles, cable routing, shielding, and EMI/EMC considerations., • Proficiency in CAD software for harness design (e.g., Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics)., • Experience with electrical simulation and analysis tools (e.g., SPICE, MATLAB)., • Strong interpersonal skills and ability to collaborate effectively within cross-functional teams., • Excellent written and verbal communication skills., • Analytical mindset with strong problem-solving and troubleshooting abilities., • Ability to think critically, propose creative solutions, and adapt to evolving project requirements., • CAD tools: Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics., • Electrical simulation tools: SPICE, MATLAB., • Ability to work in a standard office environment and use a computer for extended periods. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a talented Senior Mechanical Engineer to work in our satellite Mechanical Ground Support Equipment (MGSE) contributing to the mechanical design, analysis, specification, testing and validation. Key Responsibilities: • Lead mechanical designs and modelling of mechanical subsystems and payload. Preparation of preliminary design with layouts, sketches, testing requirements, materials, processes, and tools, define mechanical interfaces with other mechanical subsystems., • Develop and maintain mechanical design documentation, manufacturing drawings, interface control drawings for integration and test tooling. (vibration, shock, TVAC, Static Load, Integration), • Technical support to AIT activities including fabrication, assembly, integration, and tests, • Responsible for the design and capability of the system design to meet the technical requirements, • Support in structural decisions and engineering trade-offs to find the best conceptual architectures and design Qualifications Education: • Bachelor's degree in Mechanical Engineering or related technical field Experience: • A minimum of 6 years of hands-on experience in mechanical design in spacecraft mechanical systems. Preferred Qualifications: • Higher degree is preferred, • Experience using PDM and PLM software is preferred • Direct experience with AIT activities, • Design of large welded steel assemblies • Knowledge in GDIT is a plus, • Technical skills in FEM computer methods using standard analytical tools and classical structural analysis methods is a plus Soft Skills: • Demonstrated ability to work in a multidisciplinary team with other engineers, • Flexibility/adaptability in a fast-paced & dynamic environment, • Fluent English written and verbal communication skills Technology Stack: • CAD software (Inventor is preferred) Physical Requirements • Ability to work in a standard office environment and use a computer for extended periods • Ability to perform light assembly work and lift items up to 30 lbs This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking an Engineer to join our Manufacturing Engineering team and serve as the on-site lead for one of the primary satellite subsystems at our high-volume assembly line in Midland, TX. This role offers a unique hands-on perspective and direct involvement in the full lifecycle of flight hardware and Mechanical Ground Support Equipment (MGSE) - from design trades and prototyping to testing, production implementation, and quality assurance. The ideal candidate will be a proactive contributor, driving solutions to non-conformances, establishing robust processes, and supporting continuous improvement. Success in this role requires creativity, reliability, strong organizational skills, and the confidence to challenge existing norms in pursuit of excellence. Key Responsibilities • Identify bottlenecks, reduce waste, and implement continuous improvement methods (Lean, Six Sigma, Kaizen) to enhance productivity., • Troubleshoot equipment, optimize manufacturing systems, and maintain, install, or upgrade machinery, • Create and update technical documentation, including SOPs, CAD drawings, routings, and time studies., • Designing, configuring, and installing hardware, software, and networking systems. Tulip experience is a plus., • Monitoring system performance, implementing updates, and troubleshooting issues., • Working with cross-functional teams (development, IT support) to provide technical solutions., • Ensure products meet specifications, establish quality standards, and perform root-cause analysis for defects., • Lead projects, manage budgets, and support new product launches from prototype to assembly. Qualifications Education Bachelor's degree in electrical or mechanical engineering or a related technical field. Experience A minimum of 2 years in lean manufacturing, preferably in aerospace or automotive industries. Artificial intelligence experience required. Preferred Qualifications • MES Experience, • ERP Experience, • Power BI Experience, • Strong interpersonal and communication skills., • Proven ability to collaborate effectively within cross-functional teams., • Excellent written and verbal communication skills., • Meticulous attention to detail to ensure accuracy in documentation and deliverables., • Flexibility and adaptability in a fast-paced, dynamic environment., • CAD software: Autodesk Inventor (preferred), Vault, • Workshop tools: 3D printing, CNC, hand tools, soldering, • Ability to work in a standard office and workshop environment., • Ability to use a computer for extended periods., • Willingness to work hands-on with hardware and equipment on the production floor. This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview The Associate Manufacturing Engineer will support the development, evaluation, and continuous improvement of manufacturing methods and processes to sustain current production and support the introduction of new products. This role contributes to manufacturing readiness, process optimization, and the successful transition of products from design to production. Key Responsibilities • Assess new product concepts and designs for manufacturability, providing recommendations to R&D/Product Engineering., • Develop methods and processes for manufacturing new products in the safest, most cost-effective manner while meeting quality standards and production demand., • Conduct proof-of-principle or proof-of-concept studies to validate manufacturing approaches., • Design detailed manufacturing processes, including layouts, tooling, fixtures, programming, testing, and documentation., • Continuously improve existing production methods using Six Sigma methodologies and knowledge of product design, materials, fabrication processes, tooling, equipment capabilities, assembly techniques, and quality standards., • Troubleshoot technical issues in current production and provide engineering support to operations., • Participate in or lead Safety, Kaizen, and other continuous improvement initiatives. Education • 0–3 years of experience in a manufacturing environment., • Understanding of tooling, gauging, Six Sigma principles, and capability studies., • Experience in technical writing (procedures, work instructions)., • Excellent written and verbal communication skills, including the ability to prepare instructions, procedures, and documentation., • Strong organizational and project management abilities., • Proven problem-solving skills with the ability to collaborate effectively across teams., • MS Office Suite, • CAD/CAM software, • Manufacturing process design tools, • Ability to work in a standard office environment., • Ability to work on the production floor as needed, including standing, walking, and interacting with equipment. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description The Senior Facilities Engineer - Projects is responsible for leading the engineering and execution of large, complex facilities and midstream capital projects across company-operated assets. This role serves as a senior level individual contributor and technical authority, providing end-to-end project leadership from concept development through construction, startup, and optimization. The position works closely with Operations, Construction, Supply Chain, Regulatory, and EHS teams to ensure projects are delivered safely, on schedule, within budget, and in compliance with all applicable standards and regulations. Key Responsibilities • Lead facilities and midstream capital projects from feasibility, design, and AFE development through construction, startup, and close-out., • Develop project scopes, cost estimates, schedules, and bid packages; manage execution to meet cost and schedule commitments., • Serve as the technical authority for facilities, pipelines, and associated infrastructure design., • Provide engineering oversight and direction to third-party engineering firms and contractors., • Support construction, commissioning, and startup activities, including field engineering and issue resolution., • Prepare and lead Management of Change (MOC) processes, Process Hazard Analysis (PHA) and Pre-Startup Safety Reviews (PSSRs)., • Evaluate and optimize existing facilities to improve safety, reliability, air compliance performance, and operational efficiency. Provide support to Production team on Optimization projects., • Partner with other Facilities Engineers on a safe and cost-effective design, while minimizing loss of production revenue through innovative techniques, procedures and equipment design., • Ensure compliance with applicable engineering codes, company standards, and environmental and air-quality regulations., • Partner with EHS and Regulatory teams to support process safety and compliant designs., • Provide technical mentorship and guidance to early career facilities engineers., • On-call support, including nights and weekends, may be required., • Expected field presence as required to support Construction and Production.Required Qualifications, • Bachelor’s degree in Chemical, Mechanical, Petroleum, Civil, or related Engineering discipline., • 8+ years of Oil & Gas facilities or midstream engineering experience., • Demonstrated experience leading capital projects with significant scope and complexity., • Strong knowledge of facilities and midstream systems, including PFDs, P&IDs, equipment design, and pipeline infrastructure., • Experience supporting both greenfield and brownfield facilities projects., • Prior field engineering or startup experience., • Working knowledge of applicable industry codes, standards, and regulatory requirements., • Ability to work independently, manage multiple priorities, and collaborate across disciplines., • Expert level of skill in Microsoft Office. Experience with commonly used industry software, especially process modeling and project management tools.Preferred Qualifications, • Previous experience in Delaware and Midland Basin preferred., • OSHA PSM experience preferred., • PMP certification preferred. SM Energy offers competitive compensation and benefits programs which include, but are not limited to, variable pay, health care coverage, retirement plan, protection coverage, time off and leave programs, training and development opportunities and a range of allowances connected to specific work situations. Details are available at Careers :: SM Energy Company (SM) (sm-energy.com). Applications will be accepted on an ongoing basis until the position is filled.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking an Associate Automation Engineer to support the design, development, and implementation of automated systems that improve manufacturing efficiency, quality, safety, and scalability. This role works across production, test, and engineering teams to help deploy controls, robotics, and software-driven automation that reduce manual intervention and enable reliable, repeatable operations. The ideal candidate is an early-career engineer with foundational knowledge of controls, robotics, and software automation who is eager to build hands-on experience in industrial and manufacturing environments. Key Responsibilities • Support design and implementation of automated manufacturing systems, controls, and workflows using hardware and software solutions, • Assist with integration of sensors, actuators, PLCs, HMIs, and robotic equipment into production processes, • Develop and modify PLC logic, automation scripts, and control sequences under senior engineer guidance, • Troubleshoot automated equipment, controls, and software to minimize downtime and improve performance, • Participate in commissioning, validation, and testing of automation systems and production equipment, • Create and execute test plans, simulations, and acceptance criteria to ensure system reliability and safety, • Assist with robotic programming, setup, and optimization for manufacturing or test applications, • Develop and maintain technical documentation including wiring diagrams, procedures, and work instructions, • Collect and analyze performance data to identify process improvement opportunities Education • 0–3 years of experience in automation, controls, robotics, manufacturing, or related environment, • Hands-on experience with PLC programming (Siemens, Allen-Bradley, or similar), • Experience configuring or supporting HMIs/SCADA systems, • Familiarity with scripting or programming languages such as Python, Java, or C#, • Exposure to robotic systems (ABB, UR, Fanuc, Yaskawa, or equivalent), • Experience supporting automated manufacturing or test equipment, • Knowledge of safety standards, equipment validation, and system qualification practices, • Strong troubleshooting and root cause analysis skills, • Clear written and verbal communication, • Ability to learn quickly in hands-on technical environments, • Detail-oriented with strong safety awareness, • Collaborative and team-focused mindset, • PLCs: Siemens, Allen-Bradley (or similar), • HMIs/SCADA platforms, • Programming/Scripting: Python, Java, C#, • Robotic systems: ABB, UR, Fanuc, Yaskawa, • Industrial sensors, actuators, and controls hardware, • Ability to work in manufacturing and lab environments, • Ability to stand, walk, and support equipment on the production floor for extended periods, • Ability to occasionally lift up to 25 lbs AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview The Engineering Development Program (EDP) is designed for exceptional recent graduates who want to become spacecraft engineers by learning how satellites are physically built. Participants in this program will begin their careers working directly on the spacecraft production floor as Engineering Technicians supporting CSAT structures, integrations, and major assembly operations. In this role, participants will gain hands-on experience assembling and integrating flight components into the spacecraft. As participants demonstrate technical capability and leadership potential, they will progress through a structured development path: Engineering Technician → Associate Manufacturing Engineer → Manufacturing Engineer This program provides a rare opportunity to develop engineers who understand spacecraft hardware from the ground up—combining hands-on spacecraft assembly experience, early leadership development, and a clear transition into an engineering role. Participants will gain direct experience building flight hardware, leading technical teams, and supporting spacecraft production at scale. Key Responsibilities Phase 1 – Engineering Technician Participants begin the program working directly with spacecraft hardware supporting CSAT structures, integrations, and major assembly operations. Responsibilities include: • Perform hands-on assembly and integration of CSAT structures, mechanical subsystems, and flight components., • Support mechanical integration, alignment, and fastening of spacecraft assemblies., • Assist with bonding, adhesives, potting, and precision assembly processes in accordance with engineering procedures and workmanship standards., • Follow strict cleanroom protocols including ESD and FOD control when handling flight hardware., • Support quality inspections and verification activities to ensure hardware meets engineering specifications and workmanship standards., • Assist with troubleshooting assembly or integration issues during spacecraft production. Phase 2 – Associate Manufacturing Engineer After demonstrating strong technical performance and leadership capability, participants transition into a supervisory role supporting CSAT structures and major assembly operations. Responsibilities include: • Lead and supervise teams performing assembly and integration of spacecraft hardware., • Coordinate daily production activities to ensure assembly milestones are achieved on schedule., • Ensure technicians follow engineering procedures, quality standards, and cleanroom protocols., • Train and mentor junior technicians in spacecraft assembly and integration practices., • Support troubleshooting and resolution of assembly and integration challenges., • Collaborate with engineering and production leadership to improve processes and operational efficiency. Phase 3 – Manufacturing Engineer Upon successful completion of the development program, participants transition into a Manufacturing Engineer role supporting spacecraft production and integration. Responsibilities include: • Support engineering teams in developing and improving spacecraft assembly and integration procedures., • Assist with troubleshooting hardware integration challenges during spacecraft build operations., • Analyze production processes and identify opportunities for efficiency improvements., • Support spacecraft integration campaigns and cross-functional engineering efforts., • Collaborate with design engineers to provide feedback from production operations to improve hardware designs. Qualifications Education Bachelor's degree in one of the following fields: • Aerospace Engineering, • Mechanical Engineering, • Electrical Engineering, • Manufacturing Engineering, • Industrial Engineering, • Recent graduate or early-career engineer with strong academic performance, • Hands-on engineering project experience through internships, research labs, or academic programs, • Experience with mechanical assemblies, electronics, robotics, or hardware systems preferred, • Experience with mechanical assemblies, electromechanical systems, or wiring harnesses, • Exposure to aerospace manufacturing, spacecraft systems, or cleanroom environments, • Experience with bonding, adhesives, or precision assembly processes, • Strong curiosity and desire to understand how complex hardware systems are built, • Demonstrated leadership potential and ability to guide technical teams, • Strong problem-solving mindset and attention to detail, • Excellent communication and collaboration skills Engineering & Manufacturing Tools • Precision mechanical assembly tools, • Electrical harness installation equipment, • Microsoft Office Suite, • Ability to perform hands-on work with spacecraft hardware and mechanical assemblies, • Ability to stand for extended periods during integration and assembly operations, • Ability to work in cleanroom environments under strict ESD and FOD control protocols, • Ability to lift and move equipment up to 25 pounds as required for spacecraft integration tasks This job description may not be inclusive of all duties and responsibilities. Additional tasks may be assigned to the employee from time to time or the scope of the role may change as needed based on business demands. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview The Associate Flight Assurance Engineer will assist in developing, evaluating, and improving mission assurance processes and practices to ensure product reliability, compliance, and quality throughout the lifecycle of space systems and components. This role supports design, manufacturing, and test activities to ensure the safety, functionality, and performance of flight hardware. Key Responsibilities • Assess new product concepts and designs for reliability, safety, and compliance with mission assurance standards; provide recommendations to Engineering and Program teams., • Develop and implement mission assurance methods and processes to meet quality, safety, and regulatory requirements while supporting program schedules and cost objectives., • Conduct risk assessments, failure mode analyses, and proof-of-concept studies to validate design integrity and operational readiness., • Prepare and maintain detailed documentation, including assurance plans, risk mitigation strategies, and compliance reports., • Continuously improve mission assurance practices using industry standards and methodologies (e.g., FMEA, FRACAS, Six Sigma) to enhance reliability and reduce risk., • Support root cause investigations and corrective actions for anomalies in design, manufacturing, or test phases., • Participate in or lead initiatives related to safety, quality improvement, and process optimization. Education • 0–3 years in flight/mission assurance, quality engineering, or reliability engineering within aerospace or manufacturing environments., • Understanding of quality standards (AS9100, NASA/DoD requirements), risk management processes, and mission assurance methodologies., • Experience with reliability analysis tools or systems engineering tools., • Excellent verbal and written communication skills with the ability to prepare technical reports and assurance documentation., • Strong organizational and project management abilities., • Proven capability to collaborate effectively within cross-functional teams., • MS Office Suite, • Risk and reliability analysis tools (e.g., FMEA software, reliability modeling tools), • PLM or document control systems (e.g., Windchill, Arena), • Ability to work in a standard office environment., • Ability to use a computer for extended periods. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description SUMMARY The Mechanical Design Engineer works under the supervision of the Director of Engineering and is responsible for supporting engineering design, documentation, and product execution activities for Platinum and its customers. This role assists in the development, refinement, and sustainment of Platinum’s product offerings, ensuring designs are accurate, manufacturable, compliant with applicable codes and standards, and aligned with project requirements. RESPONSIBILITIES • Support design, production, and testing efforts for Platinum’s technical product offerings., • Assist with product line sustainment activities, including revisions, updates, and engineering change documentation., • Support the development and maintenance of complete drawing and documentation packages in accordance with the company’s quality management system., • Partner with Production and Quality Assurance to help ensure builds meet design specifications and quality standards., • Collaborate with cross-functional teams through project phases to support timely and accurate project execution., • Review customer specifications, operational requirements, and applicable standards to assist in determining product design requirements., • Participate in internal and customer project meetings as needed to provide technical input and updates., • Support procurement and vendor coordination to help ensure sourced components meet project requirements., • Assist Engineering and Field Service teams in resolving operational issues and incorporating design improvements., • Support Engineering and Sales in gathering technical information for customer quote packages., • Assist in creating and maintaining fabrication drawing packages, P&IDs, BOMs, ECNs, installation manuals, control narratives, and related documentation., • Review drawings for adherence to customer specifications and company standards., • Contribute to continuous improvement initiatives related to design efficiency, documentation quality, and manufacturing support., • Perform other duties as assigned. SKILLS • Ability to manage multiple assignments and prioritize effectively., • Strong verbal and written communication skills., • Solid understanding of fabrication drawing packages, P&IDs, electrical drawings, BOM management, and revision control processes., • Working knowledge of gas compression systems, piping design, instrumentation and control, and fabrication practices., • Experience working within a structured quality management system (ISO 9001, API Q1, etc.)., • Proficiency in Autodesk design software (Inventor/AutoCAD preferred)., • Experience with ERP systems (NetSuite preferred)., • Strong analytical and problem-solving skills., • Detail-oriented with strong mathematical aptitude. ADDITIONAL REQUIREMENTS • Mechanical Engineering degree or related field., • 3+ years of engineering design experience in oil & gas, compression, piping, or fabrication., • Preferred experience: natural gas compression, vapor recovery systems, vessel and piping fabrication., • PE license (preferred, not required).

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a highly skilled CFRP (Carbon Fiber Reinforced Polymer) Manufacturing Engineer with a strong background in aerospace composite fabrication. The ideal candidate brings hands-on experience with Toray prepreg materials, CNC routing, bonding preparation, autoclave operations, composite curing, and has supported new facility startups as well as capital equipment specification and sourcing. This role will be instrumental in developing, optimizing, and scaling advanced composite manufacturing processes for aerospace applications. Key Responsibilities • Develop and optimize manufacturing processes for CFRP components using Toray prepreg systems., • Lead or support new facility startups, including layout planning, utilities coordination, equipment selection, installation, and commissioning., • Specify, source, validate, and maintain capital equipment such as autoclaves, CNC routers, ovens, and bonding tools., • Program and operate CNC routers for precision trimming and drilling of composite structures., • Oversee bonding preparation processes, including surface treatment, adhesive application, and cure cycle optimization., • Manage autoclave operations, including recipe development, cycle optimization, and maintenance coordination., • Apply expertise in composite curing processes—thermal profiles, pressure cycles, and material-specific requirements—to ensure optimal part quality and structural integrity., • Create and maintain detailed work instructions, process documentation, and tooling specifications., • Collaborate with engineering, quality, and production teams to ensure manufacturability and compliance with aerospace standards., • Troubleshoot production issues and implement corrective actions to improve yield, reduce scrap, and enhance overall process efficiency. Education • Minimum of 10 years of aerospace composite manufacturing experience, specifically with CFRP., • Demonstrated expertise with Toray prepreg materials including handling, layup, and curing., • Proficiency in CNC routing, fixture design, and CAM programming for composite materials., • Proven experience supporting new facility setup, equipment layout, and process commissioning., • Demonstrated ability to specify, procure, and validate capital equipment for composite manufacturing., • TTI Environmental Engineering Specialist Certificate with emphasis on vibration, shock, and thermal vacuum test procedures., • ISO 17025 familiarity or laboratory accreditation experience., • Training in MIL-STD and NASA standards such as MIL-STD-810, MIL-STD-1540, and NASA-STD-7002B., • Project Management Professional (PMP)., • Six Sigma or Lean certification., • Strong communication skills and the ability to work cross-functionally with engineering, quality, and production., • Excellent technical writing and documentation capabilities., • Highly skilled in troubleshooting complex manufacturing challenges., • Strong attention to detail and a commitment to high-quality results., • Experience with CAD/CAM software such as SolidWorks, Autodesk Inventor, CATIA, or Mastercam., • Familiarity with CNC programming interfaces and routing systems., • Use of manufacturing documentation tools and digital recordkeeping systems., • Ability to work in a manufacturing environment around machinery, ovens, and autoclaves., • Ability to occasionally lift 35–50 lbs depending on tooling or material needs. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview The Engineering Development Program (EDP) is designed for exceptional recent graduates who want to become Industrial Engineers by learning about high volume space industry operations to support a rapid deployment of Low-Earth Orbit (LEO) satellite constellation. Participants in this program will begin their careers working directly on the spacecraft production floor as Engineering Technicians supporting Micron Operations. In this role, participants will gain hands-on experience assembling, testing, and integrating flight components for the phased array of the satellite. As participants demonstrate technical capability and leadership potential, they will progress through a structured development path: Engineering Technician → Associate Manufacturing Engineer → Manufacturing Engineer or Flight Assurance Engineer or Industrial Engineer or Supervisor This program provides a rare opportunity to develop engineers who understand spacecraft hardware from the ground up—combining hands-on spacecraft assembly experience, early leadership development, and a clear transition into an engineering role. Participants will gain direct experience building flight hardware, leading technical teams, and supporting spacecraft production at scale. Key Responsibilities Phase 1 – Industrial Engineering Technician Participants begin the program working directly with spacecraft hardware supporting Micron Operations. Responsibilities include: • Perform hands-on assembly and integration of flight components., • Support mechanical integration, alignment, and fastening of microns into the phased array., • Assist with bonding, adhesives, potting, and precision assembly processes in accordance with engineering procedures and workmanship standards., • Follow strict cleanroom protocols including ESD and FOD control when handling flight hardware., • Support quality inspections and verification activities to ensure hardware meets engineering specifications and workmanship standards., • Assist with troubleshooting assembly or test issues during operations. Phase 2 – Associate Industrial Engineer After demonstrating strong technical performance and leadership capability, participants transition into a supervisory role supporting Micron operations. Responsibilities include: • Lead and provide technical guidance to teams performing assembly and integration of spacecraft hardware., • Coordinate daily production activities to ensure assembly milestones are achieved on schedule., • Ensure technicians follow engineering procedures, quality standards, and cleanroom protocols., • Train and mentor junior technicians in assembly, test and integration practices., • Support troubleshooting and resolution of assembly and integration challenges., • Collaborate with engineering and production leadership to improve processes and operational efficiency., • Ensure proper documentation and compliance with spacecraft manufacturing standards. Phase 3 – Option #1 – Industrial Engineer Upon successful completion of the development program, participants transition into a Manufacturing Engineer role supporting spacecraft production and integration. Responsibilities include: • Support engineering teams in developing and improving assembly and integration procedures., • Assist with troubleshooting hardware integration challenges during operations., • Analyze production processes and identify opportunities for efficiency improvements., • Support spacecraft integration campaigns and cross-functional engineering efforts., • Collaborate with design engineers to provide feedback from production operations to improve hardware designs., • Support development of tooling, fixtures, and build processes for spacecraft production. Phase 3 – Option # 2 – Supervisor (Operations Leadership Track) Upon successful completion of the development program, participants transition into a Supervisor role supporting micron operations. Responsibilities include: • Supervise satellite mechanical and electrical assembly operations, ensuring adherence to work instructions, engineering specifications, and quality standards., • Oversee and coordinate personnel across assigned shifts to ensure products are built on time, within cost targets, and meeting all quality expectations., • Maintain 6S standards, general housekeeping, and overall operational effectiveness for assigned production areas., • Support employee training, process auditing, and skills development to meet departmental objectives and certification requirements., • Motivate, coach, and engage employees to drive performance, accountability, and teamwork., • Partner with other supervisors, managers, and operations leadership to resolve production bottlenecks and personnel performance issues., • Support and guide the team in achieving key operational metrics and departmental goals, including safety, quality, delivery, and efficiency. Qualifications Education Bachelor's degree in one of the following fields: • Aerospace Engineering, • Mechanical Engineering, • Electrical Engineering, • Manufacturing Engineering, • Industrial Engineering, • Recent graduate or early-career engineer with strong academic performance, • Hands-on engineering project experience through internships, research labs, or academic programs, • Experience with mechanical assemblies, electronics, robotics, or hardware systems preferred, • Experience with mechanical assemblies, electromechanical systems, or wiring harnesses, • Exposure to aerospace manufacturing, spacecraft systems, or cleanroom environments, • Experience with bonding, adhesives, or precision assembly processes, • Strong curiosity and desire to understand how complex hardware systems are built, • Demonstrated leadership potential and ability to guide technical teams, • Strong problem-solving mindset and attention to detail, • Excellent communication and collaboration skills Engineering & Manufacturing Tools • Precision mechanical assembly tools, • Electrical harness installation equipment, • Microsoft Office Suite, • Ability to perform hands-on work with spacecraft hardware and mechanical assemblies, • Ability to stand for extended periods during integration and assembly operations, • Ability to work in cleanroom environments under strict ESD and FOD control protocols, • Ability to lift and move equipment up to 25 pounds as required for spacecraft integration tasks, • Position is based at the Midland, Texas facility and requires on-site collaboration with spacecraft production and engineering teams This job description may not be inclusive of all duties and responsibilities. Additional tasks may be assigned to the employee from time to time, or the scope of the role may change based on business needs. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview Lead civil and structural assessments for satellite gateway sites, ensuring that foundations, site layouts, utilities, and construction work meet engineering expectations, local permitting requirements, and overall deployment timelines. You will own the civil scope from site survey and design review through construction quality, issue resolution, and final turnover, ensuring the site is fully ready for gateway activation. This role operates at the intersection of civil engineering excellence and satellite technology deployment, requiring engineering precision balanced with business urgency while managing regulatory requirements across diverse markets. Key Responsibilities Site Surveys & Assessments • Conduct civil surveys to understand topography, access, drainage patterns, soil behaviour, utilities, and overall build feasibility, • Review designs for foundations, antenna/radome supports, equipment pads, shelters, structural frames, and site steel, • Confirm that designs account for expected forces such as wind and seismic and follow widely used US design practices common to building and telecom infrastructure, • Prepare civil/structural drawings and calculation packages in a format suitable for local building departments, • Coordinate with Authorities Having Jurisdiction (AHJs) to help obtain timely permits, • Oversee construction activities including earthworks, foundations, drainage works, trenches and duct banks, and concrete installations, • Ensure contractors maintain proper stormwater controls and follow good environmental practices on site, • Address onsite technical issues such as RFIs, unexpected soil or rock conditions, and field adjustments, • Ensure all civil deliverables as‑built drawings, inspection results, soil and concrete test records, redlines, and turnover documentation are complete and accurate, • Identify when tall structures or temporary cranes may require review by aviation authorities and coordinate the necessary documentation, • Work closely with teams including RF/antenna engineering, mechanical and electrical teams, operations, HSE, program management, procurement, legal/permitting, and real estate/site acquisition Education • Bachelor's degree in civil engineering or related field, • 5+ years of experience in civil/structural engineering for mission‑critical, telecom, industrial, or similar infrastructure, • Ability to review civil/structural designs for conformance with commonly used US building and structural design practices, • Construction experience including QA/QC, inspection oversight, RFI management, and closeout documentation, • Familiarity with construction stormwater and erosion‑control requirements typically required on US projects, • Professional Engineer (PE) license or EIT progressing toward licensure, • Experience with satellite ground stations, antenna foundations, radomes, or telecom towers, • Strong knowledge of foundations, grading, earthworks, drainage, and practical construction considerations, • Ability to review and redline civil drawings and specifications, • Experience with civil engineering design software including AutoCAD and Civil 3D, • Strong field judgement and ability to anticipate constructability issues, • Effective at coordinating contractors and driving timely resolution of issues, • Internal: Program/Project Management, RF/Antenna Engineering, Mechanical/Electrical Teams, Network/Operations, HSE, Supply Chain, Legal/Permitting, Real Estate/Site Acquisition, • Commonly used US building‑safety and structural‑design principles adopted by local building departments, • Widely accepted practices for concrete, steel, and foundation design, • Standard environmental and stormwater management practices for construction sites, • Aviation‑review processes for tall structures or cranes when required, • Construction‑safety practices for crane use, heavy lifts, and high‑risk activities Success measured by: • Gateway construction schedule adherence and milestone achievement, • Construction quality metrics and facility performance, • Regulatory approval efficiency and permit acquisition success, • Cost management and budget compliance, • Role based in US with regular travel for site visits and construction oversight (~40%), • Ability to conduct field inspections at construction sites, • Occasional international travel for gateway development AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview The Senior RF Integration & Test Engineer will own the complete testing lifecycle for satellite TT&C and GNSS subsystems. This role operates across both the RF development laboratory and the spacecraft integration cleanroom, defining and executing RF test campaigns from early technology validation through flight hardware integration and environmental qualification. The engineer will validate satellite test procedures, develop and verify automated test software, and execute test campaigns that ensure spacecraft RF systems perform reliably from the factory floor to orbit. This position plays a critical role in ensuring ground system compatibility and supporting mission success through In-Orbit Testing (IOT) and satellite commissioning. Key Responsibilities • Define, author, and execute detailed RF test procedures supporting spacecraft development, integration, and production., • Validate satellite-level test procedures and automated scripts within the RF development lab prior to execution on flight hardware in the cleanroom., • Lead end-to-end "test as you fly" ground compatibility testing to ensure seamless RF communication between spacecraft radios and TT&C ground stations., • Support the development and validation of system CONOPS and mission use cases through flatsat testing and integrated RF system validation., • Provide mission support during satellite commissioning by leading RF data analysis during In-Orbit Testing (IOT)., • Plan and execute RF testing during environmental qualification and acceptance test campaigns including thermal vacuum (TVAC), vibration, and EMI/EMC testing., • Perform advanced RF characterization measurements including EIRP, G/T, phase noise, group delay, P1dB, and passive intermodulation., • Operate and maintain RF metrology equipment including vector network analyzers, spectrum analyzers, signal generators, and power meters., • Oversee operation, calibration, and architectural evolution of RF Electrical Ground Support Equipment (EGSE). Education • Minimum of 5+ years of hands-on experience in RF subsystem testing and validation within aerospace, defense, or satellite manufacturing environments., • Proven experience executing ground station compatibility testing and supporting satellite In-Orbit Testing (IOT) operations., • Experience validating software CONOPS and system-level RF use cases for satellite payloads, TT&C systems, or transponders., • Strong operational knowledge of RF metrology equipment including vector network analyzers, spectrum analyzers, power meters, and signal generators., • Experience working with satellite TT&C architectures and RF communications subsystems., • Familiarity with automated RF test scripting environments including Python-based frameworks or SCPI command interfaces., • Experience working with integrated spacecraft flatsat test environments., • Adaptability and resilience in fast-paced engineering environments., • Strong analytical and proactive problem-solving abilities., • Clear and effective communication across engineering, production, and integration teams., • Highly collaborative and mission-focused mindset., • Programming & Analysis: MATLAB, Python, • Platforms & Infrastructure: Linux, Docker, • Ability to stand for extended periods while performing test activities and maneuver around large RF test fixtures and spacecraft hardware., • Ability to work in a cleanroom environment under strict ESD and FOD control protocols., • Ability to lift and move equipment up to 25 pounds as needed for test setup and integration activities., • Position is based at the Midland, Texas facility and requires on-site collaboration with engineering and spacecraft integration teams., • Occasional domestic and international travel may be required to support mission milestones, vendor integration activities, and spacecraft testing operations. This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a specialized RF & Control Systems Engineer to design, develop, and validate the tracking algorithms and control systems for our satellite and ground station antennas. Key Responsibilities: • Collaborate with antenna vendors to define control interfaces and validate tracking performance., • Design and simulate antenna control loops and tracking algorithms using tools like MATLAB/Simulink., • Develop and test embedded software/firmware for Antenna Control Units (ACUs). Education: Master's degree in electrical, mechatronics, or computer engineering. Experience: A minimum of 3 to 5 plus years in control systems or embedded software development for RF applications. Preferred Qualifications: • Experience with real-time operating systems (RTOS)., • Adaptability & Resilience, • Proactive Problem-Solving, • High-Impact Communication, • Collaborative & Mission-Focused, • Matlab, Simulink, • Python, • Linux, • Ability to work in a standard office environment and use a computer for extended periods. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Summary The Harness Manufacturing Engineer is responsible for developing, optimizing, and supporting the production of electrical harnesses and cable assemblies for Low Earth Orbit (LEO) satellite platforms. This role ensures harnesses are designed, manufactured, and tested to meet aerospace standards and mission requirements, while improving quality, repeatability, and production efficiency. Key Responsibilities • Manufacturing Engineering Support:, • Develop and maintain harness assembly processes, work instructions, and manufacturing documentation (routers, travelers, and assembly drawings)., • Support design-to-production handoffs by reviewing harness design schematics and layouts for manufacturability and reliability., • Define and select tooling, equipment, and materials required for harness production., • Drive improvements in harness routing, termination, and installation practices., • Production Oversight:, • Provide on-the-floor support to manufacturing technicians during harness assembly, integration, and troubleshooting., • Establish and optimize assembly sequences and jigs to ensure repeatable, high-quality harness fabrication., • Perform root cause analysis and implement corrective/preventive actions for nonconformances., • Testing and Quality Assurance:, • Develop and implement testing protocols using automated harness testers (e.g., CIRRIS or similar systems)., • Ensure all assemblies comply with IPC/WHMA-A-620 and NASA/ESA workmanship standards., • Review and approve first article inspections (FAIs) and ensure compliance with aerospace quality requirements., • Process Improvement & Documentation:, • Lead continuous improvement initiatives to increase production efficiency and reduce cost., • Maintain configuration management of harness designs, tooling, and process documentation., • Bachelor's degree in Electrical, Mechanical, Aerospace Engineering, or related field; or equivalent technical experience., • 3+ years of experience in harness or cable assembly manufacturing for aerospace, defense, or satellite applications., • Strong understanding of harness design principles, electrical schematics, and 3D CAD tools (e.g., CATIA, Creo, SolidWorks)., • Familiarity with industry standards: IPC/WHMA-A-620, ECSS-Q-ST-70, NASA-STD-8739.4., • Hands-on experience with crimping, soldering, wire dressing, and connectorization., • Experience with automated harness testers (CIRRIS, DIT-MCO, etc.)., • Experience in satellite or spacecraft harness design and integration., • Knowledge of harness routing and design in 3D modeling software., • Understanding of aerospace material selection (wires, connectors, backshells, shielding, and sleeving)., • Lean manufacturing or Six Sigma certification. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking an experienced Satellite Mechanical/Structural Engineer to lead the design, analysis, and optimization of satellite structures and launch vehicle adapters. This role involves both non-recurring and sustaining activities for mechanical structures, mechanisms accommodation, and related elements, ensuring successful delivery to integration and testing. The ideal candidate will be innovative, collaborative, and capable of working autonomously while also leading small teams. Key Responsibilities • Lead design, analysis, and system trade studies to determine optimal architecture for satellite structures and launch vehicle adapters., • Execute design and evaluation of assigned projects using sound engineering principles and program requirements., • Develop structural configurations, testing requirements, materials, processes, and tools., • Create and maintain mechanical/structure design documentation: analysis reports, interface control drawings, test procedures, and manufacturing drawings., • Prepare and present design and readiness reviews to management and peers., • Troubleshoot anomalies, perform root-cause analysis, and implement resolutions., • Collaborate with manufacturing to ensure efficient transfer of design information., • Champion new technologies and methods to improve design and production. Education: Master's degree in mechanical engineering or related technical field. Experience: A minimum of 15 years of hands-on experience in mechanical design, integration, and testing of spacecraft and launch vehicle structures. Preferred Qualifications: • Expertise in stress and static load testing for satellite or launch vehicle structures., • Familiarity with design for manufacturability and on-orbit environments., • Strong interpersonal and leadership skills., • Proven ability to collaborate effectively within cross-functional teams., • Excellent written and verbal communication skills., • Meticulous attention to detail for documentation and deliverables., • CAD software: Autodesk Inventor (preferred), CATIA, SolidWorks, CREO., • Ability to work in a standard office environment and use a computer for extended periods. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionJob Title: Mechanisms Engineer Job Description The Mechanisms Engineer will provide manufacturing and test engineering support during the production phases, ensuring integration and verification are efficiently executed. The role requires leading mechanism-level and subsystem-level tests, as well as developing testing requirements, materials, processes, and tooling for various tests such as vibration, shock, and thermal vacuum (TVAC) assembly. This position involves executing design and analysis tasks using sound engineering principles, participating in trade studies, and providing inputs to optimize manufacturing processes. Responsibilities • Provide engineering support to Production during build, integration, and verification phases., • Lead mechanism-level and subsystem-level tests and develop testing requirements and processes., • Participate in and execute design, analysis, and system trade studies for mechanism assembly, integration, and testing (AIT) strategies., • Provide inputs to Design Engineering to optimize manufacturing flow, cost, and layout., • Prepare detailed product and process reports by collecting, analyzing, and summarizing data., • Execute design and analysis using sound engineering principles while adhering to company standards and program requirements., • Troubleshoot and investigate anomalies and failures, perform root-cause analysis, and drive resolution., • Participate in iterative mechanism design improvements based on findings in test and production.Essential Skills, • Bachelor’s degree in Mechanical or Aerospace Engineering., • Minimum of 2–5 years of relevant experience in aerospace or precision hardware assembly/test., • Experience with aerospace manufacturing and space flight mechanisms., • Proficiency in mechanical and aerospace engineering principles.Additional Skills & Qualifications, • Experience with space-qualified mechanisms such as release devices, actuators, hinges, latches, and deployment systems., • Familiarity with root cause and corrective action (RCCA) methodologies and nonconformance resolution., • Working knowledge of ECAD/MCAD integration, configuration control, and product data management systems., • Experience in supporting vibration, shock, and TVAC test campaigns., • Understanding of cleanroom practices and contamination control., • Preferred certifications: IPC-A-610/J-STD-001, NASA or ECSS-Q-ST-70 standards, AS9100, Six Sigma., • Strong interpersonal skills and a proven problem-solving mindset., • Meticulous attention to detail and the ability to manage multiple priorities simultaneously., • Proficient in CAD tools such as AutoDesk Inventor, SolidWorks, NX, or Creo, and FEA experience is a plus., • Experience with data/documentation systems like Fusion or equivalent PDM/PLM tools., • Proficiency in Microsoft Office Suite and LabVIEW or similar test/data acquisition systems.Work Environment This is an on-site role located in Midland/Odessa, Texas. The position includes a comprehensive benefits package with salary, stipend, relocation assistance, and stock options. The work environment embraces collaboration and innovation, with a focus on precision and quality. Job Type & Location This is a Permanent position based out of Midland, TX. Pay and Benefits The pay range for this position is $110000.00 - $120000.00/yr. Client will pay competitive salary, plus stipend of $1,050 a month, relocation up to 10K, stock and hotel stay for up to 3 months Workplace Type This is a fully onsite position in Midland,TX. Application Deadline This position is anticipated to close on Apr 15, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.