Engineering jobs in Midland, TexasCrear alertas

Job Description Brief Description: The Field Engineer utilizes their operational and technical knowledge to ensure that customer requirements are met by maintaining a high standard of professionalism, quality, efficiency, and safety during the completion operations. The Field Engineer is responsible for providing technical support on location, communicating effectively with internal teams on job progress, challenges, outcomes, and assisting reliability and sustaining groups while on location. The Field Engineer collects, analyzes, and reports operational and equipment data to optimize performance. The Field Engineer is responsible for initiating data acquisition recording of all fracturing treatments parameters, monitoring treatment performance, reporting chemical and proppant usage on a per stage basis, assisting in proactively preventing early equipment failures, and ensuring excellent job quality is maintained on site. The Field Engineer assists with training less experienced engineers and operators and provides leadership on location. This position will work a rotational schedule that can include days or nights as well as weekends, and holidays. Detailed Description: All Levels: • Verify bucket test, review all pre-job QA/QC lab testing and ensure all required chemicals and proppant are delivered to location prior to starting the job. Collect oil, water, or chemical samples as needed., • Verify, review and confirm all proposals and completions procedures prior to starting the job., • Provide engineering support for complex jobs (pilot tests, breaker tests, viscosity & X-link checks), perform all pre/during-job required QA/QC testing and discuss results with internal engineering team and on-site customer representative. Document results in OIF., • Present job design, proposals, specifications, pre-job lab test results and procedures to customers on job site., • Setup MDT stream-out and data acquisition software in data van to record and transmit each stage’s treatment parameters to the Performance Center prior to starting a stage., • Confirm that all the chemicals needed for the job are on site and that the fleet has the BOLs for each chemical and with proper SDS., • Input sand and chemical volumes into the OIF. Manage chemical variance during job and coordinate chemical transfers between pad moves with supply chain and vendors., • Report all chemical and proppant volumes for each stage in the OIF., • Coordinate with district supply chain and vendors to verify all orders are delivered in a timely manner throughout the job., • Monitor all pump parameters, treating pressure, and rate during treatment and communicate with supervisor and customer representative if there are any problems or concerns., • Address any technical questions or concerns from customers related to reservoirs, fluid systems or software., • Monitor all internal and external deliverables from the Performance Center, ensure quality and provide feedback., • Reconcile all jobs (volumes, billing, inventory) and complete final reporting., • Be knowledgeable on equipment operations, limitations, and components., • Assist with data van rigging up/down and maintain cleanliness in data van and assist field operations with rig-up/down as needed., • Promote HSE values and perform job duties as per NexTier’s safety policy and standard operating procedures as well as implement best practices for field operations equipment., • Address any technical questions or concerns from customers related to reservoirs, fluid systems or software., • Monitor all internal and external deliverables from the Performance Center, ensure quality and provide feedback., • Assist with the rollout and implementation of new technology and continuous improvement projects. Participate in special projects as assigned., • Utilize engineering principles to analyze and interpret data and conduct research to diagnose problems and develop appropriate solutions. Identify areas for improvement to maximize operational efficiencies., • Assist maintenance and engineering with root cause analysis on premature failures., • Utilize Equipment Health Monitoring (EHM) and other technologies to improve equipment reliability and proactively detect early failures before they occur., • Train and advise new engineers to abide by safety protocol and company policy and procedures. All Levels: • Able to work under pressure in remote and physically demanding environments., • Able to analyze problems by considering alternatives, followed by the systematic rejection of unacceptable alternatives, • Displays professionalism while interacting with on-site customer representative and internal management, • Cooperate with others to accomplish goals, treat others with dignity and respect and values the contributions of others, • Makes decisions based upon a mixture of analysis, wisdom, experience and judgment, • Demonstrate professionalism, integrity, ethical behavior and commitment to the values of the organization. All Level Requirements: • Bachelor's Degree in Engineering discipline, • Able to proficiently use Microsoft Office applications, Excel, MS Word, etc, • Ability to understand and speak English at a level of proficiency allowing employee to issue, receive and respond to both safety and operations-related directions in English, • Minimum nine months of field engineering experience in oil and gas, preferably in hydraulic fracturing, • Intermediate knowledge of FieldPro & MDT software, • Completion of assigned Engineering Training. (Technical Handbook training, data acquisition software, basic frac fluid knowledge, pump operation standard training, and basic math and computer skills training)., • Completion of assigned Engineering Training. This position requires the person to work outdoors in all types of weather conditions, including precipitation, cold/heat, high wind, and turbulent conditions. Frequent travel to other Company offices and frack work sites, often in remote locations, is required which may be in all types of weather conditions (rain, snow, cold, heat, day, night, etc.) and employees will be expected to properly use designated personal protective equipment (PPE). The employee is regularly required to sit, stand, or walk with occasional lifting (overhead, waist level) from floor, bending and frequent near vision use for reading and use of computer, telephone and other office equipment.

Job Description Geotechnical Engineer – Nationwide Opportunities Earth Systems, LLC – part of EnviroTech Holdings (Earth Systems, EnviroTrac, EnviroTactics, Spangler Environmental, Bio-Tech Consulting, Earth Systems Response & Restoration) Looking for a career where your expertise actually makes an impact? At Earth Systems, we’re not your typical environmental consulting firm. With 30+ locations nationwide, our teams of scientists and engineers tackle geotechnical and environmental challenges head-on—combining technical know-how with practical solutions that matter. Position Overview We’re looking for a Geotechnical Engineer who knows the consulting world—someone who’s worked with firms providing Geology, Environmental Science, and Environmental Engineering services. If you thrive in a fast-moving, multidisciplinary environment, this role will give you the chance to lead from the field and solve real-world problems head-on. You’ll take charge of project leadership across multiple regions, using your technical expertise and practical mindset to deliver results that matter. The ideal candidate will hold a PE license and bring proven experience in the environmental consulting industry, with the confidence to step into a leadership role and the drive to make an impact. What You’ll Do * Lead geotechnical investigations and in-situ testing * Deliver foundation design, slope stability, and settlement analysis recommendations * Write and present clear, actionable reports for clients * Scope, budget, and manage projects with support from a collaborative team * Oversee fieldwork and lab testing to ensure QA/QC * Partner with clients, regulators, and project teams to keep work on track * Mentor junior staff and share your expertise What We’re Looking For * Bachelor’s degree in Geotechnical Engineering, Geology, Environmental Engineering, or related field (Master’s a plus) * 5+ years of experience in geotechnical or applied environmental consulting * PE license or EIT with the ability to obtain licensure in the state of hire within 12 months * Proficiency in AutoCAD, gINT, GeoStudio, or similar software * Strong writing skills and experience preparing technical reports * Willingness to travel to project sites within your region What We Offer * Competitive salary and full benefits (medical, dental, vision, life) * 401(k) with company match * PTO, holidays, and flexible scheduling * Phone reimbursement * Hybrid work (office/field/home mix) * Paid training, certifications, and continuing education * A growth-focused, collaborative culture where your voice matters At Earth Systems, you’ll have a seat at the table from day one—and the chance to shape meaningful projects that drive real change. Ready to take the next step? Apply now!

Bachelors Degree in Chemical Engineering and 10+ years’ experience in process engineering, wastewater management and oil & gas chemicals. Capable of performing complex chemical engineering calculations. Bachelor of Science in Chemical Engineering and 10+ years of active process/project experience

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. SUMMARY: The Satellite Integration Manufacturing Engineer is responsible for planning, developing, and supporting integration and assembly processes for satellite subsystems and full spacecraft. This role focuses on designing efficient workflows, ensuring adherence to aerospace standards, improving production quality, and driving process optimization to meet mission requirements. The engineer will collaborate closely with design engineers, technicians, quality teams, and program management to ensure seamless integration, assembly, and testing of spacecraft. KEY RESPONSIBILITIES: • Develop and maintain manufacturing plans, assembly procedures, and work instructions for satellite integration., • Design and validate fixtures, tooling, and handling equipment to support satellite assembly and subsystem integration., • Collaborate with design engineering to ensure Design for Manufacturing and Assembly (DFMA) principles are applied to spacecraft and subsystem designs., • Support satellite structure, avionics, propulsion, and payload integration activities, ensuring all interfaces are aligned with engineering requirements., • Lead and support MRB (Material Review Board) and discrepancy resolution activities to ensure nonconformances are properly addressed., • Identify, analyze, and implement process improvements to increase manufacturing efficiency, reduce cost, and improve quality., • Review and approve engineering drawings, bills of material (BOM), and change notices to ensure manufacturability., • Support cleanroom operations, ensuring ESD, FOD, and contamination control compliance., • Plan and execute assembly flow sequencing, integration schedules, and resource allocation for satellite programs., • Coordinate integration and test readiness reviews (IRR/TRR) and ensure production milestones are met., • Provide engineering support during environmental testing (Vibration, TVAC, Shock, EMC) and ensure satellite hardware readiness., • Train and mentor technicians on new assembly techniques, tooling, and best practices., • Bachelor's degree in Aerospace, Mechanical, Electrical, or Manufacturing Engineering or equivalent experience., • 3+ years of experience in spacecraft or aerospace system integration, manufacturing engineering, or related field., • Strong understanding of satellite subsystems (avionics, structures, propulsion, harnessing, solar panels, etc.)., • Experience with CAD tools (CATIA, NX, SolidWorks, Creo, or similar) and PLM systems., • Knowledge of GD&T, assembly tolerances, and precision alignment techniques., • Familiarity with cleanroom operations, ESD controls, and contamination control procedures., • Strong knowledge of lean manufacturing, process control, and root cause analysis methodologies., • Excellent communication, documentation, and cross-functional collaboration skills., • Experience with high-reliability aerospace hardware in a low-volume, high-complexity production environment., • Familiarity with tooling design and supplier management., • Knowledge of CFR Part 21, NASA-STD, ECSS standards, and AS9100D requirements., • Strong troubleshooting and problem-solving abilities., • Experience working with automation or advanced manufacturing technologies. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a highly skilled CFRP (Carbon Fiber Reinforced Polymer) Manufacturing Engineer with a strong background in aerospace composite fabrication. The ideal candidate brings hands-on experience with Toray prepreg materials, CNC routing, bonding preparation, autoclave operations, composite curing, and has supported new facility startups as well as capital equipment specification and sourcing. This role will be instrumental in developing, optimizing, and scaling advanced composite manufacturing processes for aerospace applications. Key Responsibilities • Develop and optimize manufacturing processes for CFRP components using Toray prepreg systems., • Lead or support new facility startups, including layout planning, utilities coordination, equipment selection, installation, and commissioning., • Specify, source, validate, and maintain capital equipment such as autoclaves, CNC routers, ovens, and bonding tools., • Program and operate CNC routers for precision trimming and drilling of composite structures., • Oversee bonding preparation processes, including surface treatment, adhesive application, and cure cycle optimization., • Manage autoclave operations, including recipe development, cycle optimization, and maintenance coordination., • Apply expertise in composite curing processes—thermal profiles, pressure cycles, and material-specific requirements—to ensure optimal part quality and structural integrity., • Create and maintain detailed work instructions, process documentation, and tooling specifications., • Collaborate with engineering, quality, and production teams to ensure manufacturability and compliance with aerospace standards., • Troubleshoot production issues and implement corrective actions to improve yield, reduce scrap, and enhance overall process efficiency. Education • Minimum of 10 years of aerospace composite manufacturing experience, specifically with CFRP., • Demonstrated expertise with Toray prepreg materials including handling, layup, and curing., • Proficiency in CNC routing, fixture design, and CAM programming for composite materials., • Proven experience supporting new facility setup, equipment layout, and process commissioning., • Demonstrated ability to specify, procure, and validate capital equipment for composite manufacturing., • TTI Environmental Engineering Specialist Certificate with emphasis on vibration, shock, and thermal vacuum test procedures., • ISO 17025 familiarity or laboratory accreditation experience., • Training in MIL-STD and NASA standards such as MIL-STD-810, MIL-STD-1540, and NASA-STD-7002B., • Project Management Professional (PMP)., • Six Sigma or Lean certification., • Strong communication skills and the ability to work cross-functionally with engineering, quality, and production., • Excellent technical writing and documentation capabilities., • Highly skilled in troubleshooting complex manufacturing challenges., • Strong attention to detail and a commitment to high-quality results., • Experience with CAD/CAM software such as SolidWorks, Autodesk Inventor, CATIA, or Mastercam., • Familiarity with CNC programming interfaces and routing systems., • Use of manufacturing documentation tools and digital recordkeeping systems., • Ability to work in a manufacturing environment around machinery, ovens, and autoclaves., • Ability to occasionally lift 35–50 lbs depending on tooling or material needs. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Summary The Harness Manufacturing Engineer is responsible for developing, optimizing, and supporting the production of electrical harnesses and cable assemblies for Low Earth Orbit (LEO) satellite platforms. This role ensures harnesses are designed, manufactured, and tested to meet aerospace standards and mission requirements, while improving quality, repeatability, and production efficiency. Key Responsibilities • Manufacturing Engineering Support:, • Develop and maintain harness assembly processes, work instructions, and manufacturing documentation (routers, travelers, and assembly drawings)., • Support design-to-production handoffs by reviewing harness design schematics and layouts for manufacturability and reliability., • Define and select tooling, equipment, and materials required for harness production., • Drive improvements in harness routing, termination, and installation practices., • Production Oversight:, • Provide on-the-floor support to manufacturing technicians during harness assembly, integration, and troubleshooting., • Establish and optimize assembly sequences and jigs to ensure repeatable, high-quality harness fabrication., • Perform root cause analysis and implement corrective/preventive actions for nonconformances., • Testing and Quality Assurance:, • Develop and implement testing protocols using automated harness testers (e.g., CIRRIS or similar systems)., • Ensure all assemblies comply with IPC/WHMA-A-620 and NASA/ESA workmanship standards., • Review and approve first article inspections (FAIs) and ensure compliance with aerospace quality requirements., • Process Improvement & Documentation:, • Lead continuous improvement initiatives to increase production efficiency and reduce cost., • Maintain configuration management of harness designs, tooling, and process documentation., • Bachelor's degree in Electrical, Mechanical, Aerospace Engineering, or related field; or equivalent technical experience., • 3+ years of experience in harness or cable assembly manufacturing for aerospace, defense, or satellite applications., • Strong understanding of harness design principles, electrical schematics, and 3D CAD tools (e.g., CATIA, Creo, SolidWorks)., • Familiarity with industry standards: IPC/WHMA-A-620, ECSS-Q-ST-70, NASA-STD-8739.4., • Hands-on experience with crimping, soldering, wire dressing, and connectorization., • Experience with automated harness testers (CIRRIS, DIT-MCO, etc.)., • Experience in satellite or spacecraft harness design and integration., • Knowledge of harness routing and design in 3D modeling software., • Understanding of aerospace material selection (wires, connectors, backshells, shielding, and sleeving)., • Lean manufacturing or Six Sigma certification. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a Quality Engineer to provide quality assurance support to the product development team, resolving bugs, defects, and other potential issues and ensuring that specifications are met. Key Responsibilities • Prepare, maintain, and review quality assurance procedures to assure compliance with customer and or government requirements, • Develop sampling plans, quality standards, and process control instructions for use by manufacturing in monitoring and reducing variation, • Support the implementation of Product Assurance Plans (PAPs) and implement program strategies, policies, and procedures necessary to ensure compliance with internal practices and requirements, • Analyze data of production runs to ensure parts produced meet customer requirements, • Develop and initiate standards and methods for inspection, testing, and evaluation, • Drive manufacturing efficiency improvements by evaluating plant-wide processes and applying process control methods or process changes as necessary, • Perform quality reviews and drive disposition of nonconforming material and generate corresponding reports, • Process, investigate, and disposition RMAs, • Monitor production cycles and perform tests and evaluations to identify potential malfunctions and reliability issues as early as possible, • Assist in quality inspection and control for satellite system and subsystem integration and testing activities including flight hardware and software integration and testing, ground support equipment, calibrations, tooling, and safety, • Develop and maintain strong working relationships with program offices, other AST organizations, vendors, and contractors, • Review practices, procedures, and processes to improve efficiency, effectiveness, and reduce risk to product and program quality, • Provide support to the quality engineering department, • Ensure assigned parts meet company quality requirements, • Review design plans, process procedures, test procedures, and quality manuals to understand requirements and functional intent, • Work with senior engineers to perform inspection analyses, failure analyses, and testing, • Review corrective actions implemented in the production process, • Identify root causes of production problems and recommend or implement corrective measures Education • Minimum of three years of related experience required, • Five or more years of quality system experience in an aerospace, aviation, or military manufacturing environment, • Experience reading engineering blueprints and drawings, • Ability to work in environments with evolving requirements and dynamic schedules, • Spacecraft experience in a clean room setting, • Experience leading RCCAs, • Ability to develop performance metrics and take appropriate action, • Working knowledge of manufacturing and production standards in the aerospace industry, • Solid understanding of QMS principles and processes for complex electronics used in space applications, • Familiarity with piece-part, assembly-level, and system-level inspection and verification practices, • Ability to learn production sequences and company quality standards, • Experience in Design Readiness Reviews, Test Readiness Reviews, and, • Manufacturing Readiness Reviews, • Knowledge of Quality Systems and Processes, • Experience with Preliminary Review (PR) and Material Review Board (MRB); current QMRB certification is a plus, • Lean or Six Sigma quality engineering and root cause corrective action certifications, • Experience with program and project management tools, • ASQE certification, • Quality Management Systems (QMS), • Manufacturing process control and inspection tools, • Data analysis and reporting tools, • Microsoft Office Suite or similar productivity software, • Ability to sit for prolonged periods while working at a computer, • Ability to traverse production and manufacturing facilities AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking an Integration Engineer with strong expertise in Radio Access Network (RAN) and RF systems, paired with hands-on experience debugging RF setup issues. This role is responsible for validating and troubleshooting communication systems within a satellite end-to-end environment, ensuring network performance, reliability, and compliance with design expectations. The ideal candidate brings a balanced skill set across RAN technologies and RF fundamentals, along with practical experience using advanced RF and communication test equipment. Key Responsibilities: • Perform hands-on testing and validation of communication systems and RAN components in both lab and field environments, • Debug and resolve RF setup issues, including antenna configurations, signal integrity, and end-to-end RF chain problems, • Analyze and interpret lab and field test data to identify defects, root causes, and performance improvement opportunities, • Collaborate closely with system engineers and software developers to validate new software releases and features Education: • Strong RF fundamentals with demonstrated hands-on debugging capability, • Working knowledge of 3GPP protocols and procedures, including RRC, RLC, MAC, and PHY layers, • Experience using Python and MATLAB for test automation and data analysis, • Familiarity with industry-standard tools such as XCAL, UE Simulators, Viavi, and QXDM, • Strong analytical and problem-solving skills for complex RF and communication system challenges, • Proven ability to collaborate effectively within cross-functional engineering teams, • Excellent written and verbal communication skills, • RF Test & Debug Equipment: Spectrum analyzers, signal generators, oscilloscopes, network analyzers, • Log Analysis & Diagnostics: QXDM, • Automation & Data Analysis: Python, MATLAB, • Ability to work in laboratory environments and perform hands-on RF testing for extended periods, • Ability to use a computer and test equipment for extended durations, • Occasional travel required for field testing and validation activities AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSalary: Sales Representative SCADA & Automation Engineering Crimson Group Who we are: At the Crimson Group of Companies (CGC), we deliver high-value SCADA, automation, instrumentation, and electrical solutions to the oil & gas industry. We combine the capabilities of a large enterprise with the agility of a smaller firm, ensuring our customers benefit from responsive, end-to-end support. From system design, panel fabrication, and commissioning to maintenance and upgrades, CGC is a trusted partner for automation and SCADA deployments across North America and select international markets. What we Offer: • Competitive salary., • Comprehensive benefit package and 401k plan., • Company laptop, phone, and mileage/travel reimbursement., • An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization., • Ongoing technical and sales training in SCADA & automation solutions., • The opportunity to participate in charitable events through our charity, RedTail Community Foundation. What you will be Doing: • Identifying, pursuing, and closing new SCADA and automation sales opportunities with oil & gas producers, EPCs, and midstream operators., • Building and maintaining relationships with new & existing clients., • Presenting and demonstrating SCADA platforms, remote monitoring solutions, and automation systems to customers, highlighting operational efficiency, compliance, and cost savings., • Assisting in preparing sales proposals, contracts, and reports., • Collaborating with the sales team to achieve sales targets., • Meet or exceed sales targets and contribute to the overall growth of the company, • Providing ongoing customer support, ensuring satisfaction, and identifying expansion opportunities (e.g., system upgrades, additional sites, new facilities)., • Staying updated on industry trends and product knowledge., • Maintaining accurate CRM records of opportunities, proposals, and customer interactions. Your Skills and Qualifications: • High School Diploma., • Technical Degree from a reputable university, • Strong understanding of oil & gas facility operations, instrumentation, or control systems., • Proven ability to translate technical features into business value for customers., • Strong communication and interpersonal skills., • Ability to learn and understand technical products and their applications., • Self-motivated with a results-driven approach., • Proficiency in Microsoft Office Suite. Working Conditions: • This is a full-time, MondayFriday position based in our Midland office., • The hours of work are 8am-5pm with some flexibility., • Expected to be visiting customers majority of the week, • 50% Travel away from home expected

Mercor is recruiting Civil Engineering Technologists and Technicians to work on a research project **for one of the world’s top AI companies. This project involves using your professional experience to design questions related to your occupation as a Civil Engineering Technologist and Technici

Mercor is recruiting Chemical Engineers to work on a research project **for one of the world’s top AI companies. This project involves using your professional experience to design questions related to your occupation as a Chemical Engineer.

The Maintenance Engineer plays a critical role in ensuring the overall maintenance and operational efficiency of the property.This position is responsible for routine maintenance tasks, troubleshooting equipment issues, and ensuring the safety and functionality of all building systems.The ideal cand

Bachelor's degree in electrical engineering, Mechanical Engineering, or a related field. Prior experience in electrical harness design through internships, co-op programs, or academic projects related to aerospace engineering. This role involves working closely with senior engineers to design and te

Bachelor's degree in Mechanical, Electrical, Manufacturing Engineering, Materials Science, or related field. Keywords: Solar Array Engineer, Wire Bonding, Hesse Bonder, Amada Welder, Photovoltaic Manufacturing, Aerospace Assembly, Satellite Power Systems, Cleanroom Manufacturing, IPC-A-610, NASA Sta

Mechanical Engineer with 10-15 years of experience of Design and detail engineering of Static & Rotary equipment like Pressure vessel, S&T Heat exchanger, Columns, Storage tanks, Air Cooled Heat Exchangers, Pumps, Compressors etc. Top performing engineers are the foundation of our business. Title: L

The Energy & Industrial Group (EIG) specializes in delivering advanced engineering solutions across various sectors, including power generation, environmental compliance, oil & gas, and industrial projects, from new plant design to plant betterment and upgrade services for operating facilities. This

This position will offer you the opportunity to work in a project team environment with other engineers and designers involved in the design, modification, and analysis of new and existing oil and gas facility electrical systems. The Energy & Industrial Group (EIG) specializes in delivering advanced

Capable of administering contracts and conducting and managing comprehensive analysis of transportation and engineering issues. Prepare analysis and recommendations for the installation and maintenance of traffic control devices within the city. Support or substitute for the City Traffic Engineer as

The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering gro

Bachelor's degree in mechanical or aerospace engineering. Strong interpersonal skills with the ability to collaborate across engineering and production teams. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and f

Apply sound engineering principles and be able to communicate complex engineering issues and concepts to technical and non-technical clients and project teams. Plan, schedule, conduct, and/or coordinates engineering work involving conventional engineering practices but may include a variety of compl

The Engineer will report to the Manager of Engineering as a part of the Technical Operations team and will provide engineering support to the Division Liquid Pipeline Operations. The Engineer level requires a Bachelor's degree in an engineering discipline and 3-6 years of relevant job related experi

NOW HIRING: Regional MPD Engineer - Permian Basin (Midland, TX). Are you an MPD professional ready to take ownership of engineering, operations support, and customer relationships-right in the heart of the Permian? This is your chance to be the go-to technical expert for some of the most active dril

The Associate Manufacturing Engineer will support the development, evaluation, and continuous improvement of manufacturing methods and processes to sustain current production and support the introduction of new products. Continuously improve existing production methods using Six Sigma methodologies

As a member of an engineering and design team, you will work on a wide range of oil and gas facilities.

Globally, we deliver engineered oilfield and drilling equipment repair and certification, mechanical and rotating equipment repairs and upgrades, rapid prototyping of spare parts, robust asset management, operation and maintenance and field engineering services. We have an opening for a Field Engine

Area of InterestElectrical Engineering. A Bachelor's degree or Masters degree in Electrical, Mechanical, or Chemical Engineering (from an ABET-accredited program) with a strong academic background and coursework in analog and digital control systems is required. Successful completion of the Fundamen

As a member of an engineering and design team, you will work on a wide range of oil and gas facilities.

WE have projects all across the Gulf Coast. Kiewit Foundations District is seeking motivated and skilled Project Engineers to join our team in the Gulf Coast region, primarily in Louisiana and Mississippi. Willingness to travel and relocate within the Gulf Coast region as needed.

Bachelor's degree in Electrical, Mechatronics, Aerospace or Computer engineering field or Associates Degree in Electrical Engineering with 2 years of direct experience. The Associate Electrical Test Engineer is responsible for the development and execution of tests to ensure the quality of our produ

They proudly bring together architects, civil engineers, interior designers, landscape architects, MEP engineers, structural engineers, as well as experts in construction management and surveying. A multidisciplinary Architectural and Engineering firm with over seventy years of experience operating

Field Service Engineer - Electrical. Communicate fleet and product issues to the engineering teams, commercial teams and product line managers to identify new opportunities. Bachelor's Degree from an accredited university or college (or a High School Diploma with a minimum of 4 years of experience i

Evaluate electrical transmission, substation, and distribution infrastructure to determine appropriate modifications and new infrastructure required for supporting electrical loads. Participates in identification & sourcing long lead equipment, assuring Front End Engineering Design (FEED) contractor

Assist in the training of all Operator positions and Junior Field Engineers as assigned. Perform all wireline related engineer tasks without supervision.

We are seeking several dedicated Associate Manufacturing Engineer to contribute to the development and optimization of manufacturing processes. Develop manufacturing processes by studying product requirements and designing, modifying, and testing methods and equipment. Create product and process rep

Root Cause Analysis, FAIs, High-Reliability Production, Engineering Jobs Texas, Space Industry Jobs, Satellite Assembly, Integration and Testing, AIT, Midland TX Engineering Jobs. Keywords: Harness Manufacturing Engineer, Electrical Harness, Cable Assembly, Aerospace Manufacturing, Satellite Product

This Field Service Technician will perform commissioning as well as mechanical and/or electrical hands-on field service work on. For example checking oil, replace filters and valves and diverse types of measurements. Troubleshooting engines on the field of Electronics and mechanics.

Develop and execute quality control processes to ensure safety, performance, and mission reliability of satellite components.

This position will offer you the opportunity to work in a project team environment with other engineers and designers involved in the design, modification, and analysis of new and existing oil and gas facility electrical systems.

Bachelor's and/or Master's degree in Mechanical Engineering from an ABET Engineering Accreditation Commission-approved program is required. DepartmentMechanical Engineering. Responsible for working directly with fellow members of the mechanical engineering team & mechanical design team for project e

Bachelor's and/or Master's degree in Mechanical Engineering from an ABET Engineering Accreditation Commission-approved program is required. Knowledge in the design of mechanical engineering systems for non-commercial, heavy industrial plants (power plant - essential, oil & gas, or chemical - valued)

Responsible for the oversight and technical direction of the mechanical effort on Oil & Gas projects including:. Bachelor's degree in Mechanical Engineering or 10+ years of direct engineering experience in the design of mechanical engineering systems for non-commercial, heavy industrial plants (powe

Bachelors Degree in Civil Engineering or related field with a Professional Engineer (PE) license in Texas or the ability to obtain within six (6) months. Stay abreast of emerging industry trends, best practices, and technological advancements to continuously improve engineering process and methodolo

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a capable and energetic Environmental Test Engineer to validate our satellite's ability to survive the harsh conditions of launch and Low Earth Orbit (LEO). In this role, you will be responsible for the end-to-end planning, coordination, and execution of critical test campaigns. You will work closely with systems, mechanical, and electrical engineering teams to ensure mission readiness. The ideal candidate thrives in a fast-paced, dynamic environment and demonstrates strong ownership over their work, making a direct impact on the success of our rapidly growing business. Key Responsibilities: • Perform Thermal Vacuum (TVAC), vibration, and shock testing on components, subsystems, and fully assembled satellites., • Coordinate logistics and scheduling with internal engineering teams and external test facilities., • Work with and oversee environmental test vendors during off-site testing campaigns., • Support test article instrumentation (e.g., thermocouples, accelerometers, strain gauges) and data acquisition system setup., • Analyze test data, interpret results, and provide actionable feedback to design and manufacturing groups., • Own, operate, and maintain internal environmental test infrastructure, ensuring compliance with safety protocols., • Lead root cause analysis and drive the resolution of test anomalies and failures., • Contribute to the continuous improvement of test processes, procedures, and documentation. Education: Bachelor's degree in mechanical engineering, aerospace engineering, or a related technical field. Experience: • A minimum of 3 years of direct, hands-on experience in environmental testing of aerospace, defense, or other high-reliability systems., • Working knowledge of relevant environmental test standards (e.g., NASA GEVS, MIL-STD-810)., • Demonstrated proficiency with TVAC chambers and vibration tables (sine/random)., • Ability to read and interpret mechanical drawings, electrical schematics, and technical specifications., • Excellent mathematical, analytical, and problem-solving skills., • Direct experience with environmental testing of satellites or spacecraft., • A proactive and accountable approach to managing projects from planning to completion., • The ability to thrive and prioritize effectively in a fast-paced, dynamic R&D and manufacturing environment., • Strong interpersonal skills to work effectively with cross-functional engineering teams and external vendors., • A methodical and analytical mindset for troubleshooting complex test anomalies., • NASA GEVS, MIL-STD-810, • TVAC Chambers, Electrodynamic Shakers (Vibration Tables), Shock Test Systems, Data Acquisition (DAQ) Hardware, • Accelerometers, Thermocouples, Strain Gauges, Force Sensors, • Ability to stand and walk for extended periods in a lab environment., • Must be able to lift and carry test equipment and components up to 40 pounds., • Manual dexterity required to handle and install sensitive instrumentation and cabling., • Ability to work in an environment with moderate noise levels from test equipment., • Visual acuity to read schematics and inspect small components. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Collaborating with the sales team to achieve sales targets. Meet or exceed sales targets and contribute to the overall growth of the company. Sales Representative - SCADA & Automation Engineering - Crimson Group.

Job Description SUMMARY The Senior Design Engineer is an onsite position based in our Midland TX location. This role reports to the Director of Engineering and is responsible for providing engineering and project management support to Platinum and its customers. Leads engineering efforts for Platinum’s technical products, striving for efficient product designs and high-quality builds. Ensures projects are completed on time, within budget, and according to project plans in compliance with any relevant codes, regulations, specs, standards, etc. RESPONSIBILITIES • Lead design, production, and testing efforts for Platinum’s technical product offering., • Leads product line sustainment efforts., • Lead and support efforts to generate and maintain complete drawing and documentation packages through engineering change notices & design packages in adherence to company quality management system., • Partner with Production and Quality Assurance to ensure builds meet design specifications and quality standards., • Collaborate with and lead a multi-disciplinary team through all project phases, ensuring projects capture all necessary customer requirements, are completed on time, and within budget., • Analyze customer specifications, operational requirements, application conditions, standards, and other documentation to determine product design requirements., • Leads and participates in project meetings with customers providing updates on schedule, design, fabrication, and testing progress., • Works with procurement and external vendors to ensure services and components sourced meet the expectations and requirements of the project., • Collaborates with Engineering and Field Service teams to resolve operational issues, provide technical guidance, and identify possible design changes to increase product efficiency and reliability., • Assist Engineering and Sales in gathering relevant design and production information for customer quote packages., • As necessary, assist in creating and maintaining design and fabrication drawing packages, P&IDs, and various other project and equipment-specific documentation such as but not limited to cause/effect matrix, sequence of operations, control narrative, installation and operating manuals, etc., • Review drawings for adherence to customer specifications and company drawing standards., • Proactively responds and adapts in the work environment to meet the highest standards., • Seek growth in expanding knowledge and skills through training and education., • Present self in a clean, neat, professional manner., • Perform other miscellaneous duties assigned. SKILLS • Ability to work on multiple projects at one time, prioritize tasks, and delegate when appropriate., • Excellent verbal and written communication skills and the ability to conduct meetings and presentations., • Sound understanding and experience with fabrication drawing packages, P&ID’s, electrical drawings, BOM management, design and revision packages., • Experience and/or sound understanding of gas compression, fluid mechanics, piping design, instrumentation and control, electrical design, fabrication, welding, and manufacturing., • Experience and/or knowledge of ERP systems, preferably NetSuite., • Experience in producing drawings in accordance with ANSI Y14.5M and/or ISO specifications., • Advanced knowledge of CAD and Autodesk software., • Knowledge and experience utilizing a structured design process controlled through a quality management system such as ISO 9001, API Q1, etc., • Must be able to work closely with and lead a team of designers., • Must have a good working knowledge of Microsoft Office programs., • Must have strong mathematical skills, be detail-oriented, have the ability to multi-task, and be able to complete tasks quickly, efficiently, and accurately., • Must be able to communicate effectively with people at all levels in the organization., • Must have strong problem-solving skills., • Must exhibit a strong work ethic., • Position-specific requirements: Sector: Oil & Gas, Chemical, and / or Manufacturing. ADDITIONAL REQUIREMENTS • Mechanical Engineering degree, or similarly related degree., • Software exposure: SolidWorks, AutoCAD, Inventor, and/or CADWorx., • Experience: 5+ years of engineering design and project management experience., • Preferred experience: Natural gas compression, piping and vessel fabrication, oil/gas industry, general compression, methane capture., • Certification: Licensed Professional Engineer (plus, not required).

Job Description We are currently seeking a Maintenance / Engineer to join our team! Responsibilities: • Complete work and repair orders in a timely fashion, • Estimate time and extent of repairs, • Perform routine preventive maintenance, • Maintain material and supply inventory, • Be ready and quick with your knowledge and experience to ensure guest safety and comfort and a safe environment critical to fellow associates., • Great team player / assisting with other departments, • Maintain Records and logs (experience using Quore will be a plus), • Respond swiftly and effectively to every emergency that arises during your shift., • Respond swiftly and effectively to every crisis that occurs while on call., • Help keep the mechanical areas safe, orderly, and clean and maintain legible, orderly records, • Cleaning the pool, • Previous Hotel / Apartment experience is a plus, • Provide shuttle service to our guests when needed during your shift., • Previous experience in maintenance or other related fields, • Good understanding of wall painting and drywall repair, • Basic knowledge of electrical repair and fixture installation, • Familiarity with AC, HVAC, and PTACs, • Must have a good understanding of outdoor Pool functions and maintenance, • Familiarity with maintenance tools and equipment, • Experience with Grounds upkeep, • Ability to handle a physically demanding workload, • Deadline and detail-oriented, • Able to use a PC and Tablet, • Must be able to be on-call after hours when needed, • Experience With Quore Maintenance System is a plus

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a highly motivated and detail-oriented Mechanisms Engineer to support the assembly, integration, and testing (AIT) of spacecraft mechanisms. The candidate will work hands-on in a dynamic environment, collaborating closely with design, test, and production teams to ensure successful build, qualification, and delivery of space mechanisms and subsystems. Key Responsibilities • Provide manufacturing and test engineering support to Production during build, integration, and verification phases, • Perform and lead mechanism-level and subsystem-level tests; develop testing requirements, materials, processes, and tooling (vibration, shock, TVAC, assembly), • Participate in and execute design, analysis, and system trade studies to determine mechanism AIT strategies at system and spacecraft levels, • Provide inputs to Design Engineering to optimize manufacturing flow, cost, and layout, • Prepare detailed product and process reports by collecting, analyzing, and summarizing data, • Execute design and analysis using sound engineering principles while adhering to company standards and program requirements, • Troubleshoot and investigate anomalies and failures, perform root-cause analysis, and drive resolution Education Bachelor's degree in mechanical or aerospace engineering Experience Minimum of 2–5 years of relevant experience in aerospace or precision hardware assembly/test. Preferred Qualifications • Experience with space-qualified mechanisms (e.g., release devices, actuators, hinges, latches, deployment systems), • Familiarity with root cause and corrective action (RCCA) methodologies and nonconformance resolution, • Working knowledge of ECAD/MCAD integration, configuration control, and product data management systems, • Experience supporting vibration, shock, and TVAC test campaigns, • Understanding of cleanroom practices and contamination control, • Strong interpersonal skills with the ability to collaborate across engineering and production teams, • Proven problem-solving mindset and ownership mentality, • Meticulous attention to detail to ensure accuracy of documentation and project deliverables, • CAD Tools: AutoDesk Inventor, SolidWorks, NX, or Creo, • Analysis Tools: FEA experience is a plus, • Data/Documentation Systems: Fusion or equivalent PDM/PLM tools, • General Tools: Microsoft Office Suite (Word, Excel, PowerPoint, Project), • Capable of working hands-on with flight hardware, test setups, and precision instruments, • Ability to lift and move up to 25 lbs, • Availability for occasional extended shifts AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.