Trabajos welder en Alexandria, VirginiaCrear alertas

Job Description American International Contractors (Special Projects), Inc. (AICI-SP) has established itself as one of the leading construction firms in the Department of State, Overseas Building Operations (OBO) program. We continue to win important contracts and projects throughout this program and others. We are searching for individuals who hold an active secret security clearance. We are currently seeking a Welder to work on a project in DOHA, QATAR. Structural Welders must possess an active SECRET clearance, a valid passport, and the ability to obtain appropriate work visas and other required documentation. Responsibilities include, but not are limited to the following (unless otherwise noted, all duties are performed regularly and/or frequently, depending on job tasks assigned for the given workday): ESSENTIAL DUTIES AND RESPONSIBILITIES: • Certified Structural Welder, • Cut and Fabricate Structural Steel ( Read and Understand Blue Prints ), • Keep work area and material staging areas clean and orderly, • Adhere to safety requirements and Think Safety First, • Ability to generate as built drawings for changed field conditions, • Assist with other assigned duties as required within skill set, even if outside of trade JOB REQUIREMENTS: • Structural Welder with Structural Welding Certification ( Dated With in last 2 Years ), • 2+ years’ construction industry experience on overseas projects, • Ability to read and understand blueprints, • Ability to read and interpret job specifications, • Basic understanding of construction principles and procedures, • High school diploma or equivalent, • Thorough knowledge of the safe and effective use of hand tools and power tools to perform assigned duties, • Flexibility in working overseas, • Understanding and adherence to local laws and customs in host country, • Following all Government site security requirements to maintain eligibility to work on project site, • Ability to take direction and work well with others, including third country nationalist (TCNs) along with meeting attendance requirements necessary to keep job on schedule and adherence to safety protocols PHYSICAL, MENTAL AND ENVIRONMENTAL DEMANDS: The demands described here are not exhaustive, but are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions in accordance with applicable law, provided that the individual does not pose a direct threat to the health or safety of the employee or others when performing such essential functions. Physical Demands: While performing the duties of this job, the employee is regularly required to, among other things, use hands to grasp and reach up with arms overhead, including manual dexterity to perform assigned duties. The employee must have the ability to regularly and for extended periods of time stoop, squat, stand, walk, twist, balance, climb (ladder and stairs of high-rise building), kneel, crouch, speak, carry, and hear. The employee may be required to work from a ladder, scaffold or elevated work platform or man lift for extended periods. There is a minimal demand for sitting, other than during periods of extended travel (such as to and from the project location). The employee must have the ability to regularly lift, carry, push or pull and move up to 50 pounds of weight without assistance. May involve frequent repetitive motions. The job imposes a substantial demand for physical agility and mobility, including the ability to balance, ambulate and maneuver safely over rough and uneven terrain throughout the work site. This position will require the use of personal protective equipment during various tasks and activities. The minimum Personal Protective Equipment required on the Project Site include hardhat, safety glasses and steel-toed safety shoes. The employee must be able to hear warning sounds and alarms, communicate effectively with coworkers and follow written and spoken instructions. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Mental Demands: The position requires a high degree of concentration in a busy environment. There is a substantial demand for analyzing, perceiving, comprehending, rapid decision making and exercising sound judgment to ensure individual and coworker safety in a potentially dangerous environment. Ability to follow directions and meet deadlines is critical. Environmental Demands: The position entails working on a busy construction site overseas, generally away from the employee’s family, and in countries whose laws and social norms may be much more restrictive than in the United States, with the potential for occasional periods of social unrest, military action, interruption of normal services such as electricity and water, natural disasters, and the like. Work involves a 60-hour workweek, 6 days a week/ 10 hours per day. Flexibility with hours/days is required. Individuals must have comfort working in a high-stress environment and be able to perform the above activities in extreme hot, cold, humid, and wet conditions depending on location and season. Frequent exposure to construction equipment and sharp tools, including power tools, and materials. Some exposure to toxic/caustic chemicals, potential electric shock, significant heights and high noise level, including high-pitched noises. Some potential exposure to dust, fumes, smoke and airborne particles. American International Contractors, Inc. is an EEO/AA/Disability/Vets Employer Powered by JazzHR zH08hUKkPn

Job Description Job Title: CAW Welder/Pipe Fitter Job Location: Durban, South Africa American International Contractors (Special Projects), Inc. (AICI-SP) has established itself as one of the leading construction firms in the Department of State, Overseas Building Operations (OBO) program. We continue to win important contracts and projects throughout this program and others. This position must possess an active SECRET clearance, a valid passport, and the ability to obtain appropriate work visas and other required documentation. Responsibilities include, but are not limited to the following (unless otherwise noted, all duties are performed regularly and/or frequently, depending on job tasks assigned for the given workday): ESSENTIAL DUTIES AND RESPONSIBILITIES: • Comply with applicable provisions of AWS D1.1 “Structural Welding Code -- Steel,” and AWS D1.3 “Structural Welding Code -- Sheet Steel.”, • Certified Structural & FEBR Welder, • Cut, Fabricate & Install FEBR & Structural Steel (Read and Understand Blue Prints), • Cut, weld and install steel tubes and sheets, • Keep work area and material staging areas clean and orderly, • Adhere to safety requirements and Think Safety First, • Ability to generate as built drawings for changed field conditions, • Finish joints in accordance with National Ornamental & Miscellaneous Metals, • Association (NOMMA) Guideline 1, • Assist with other assigned duties as required within skill set, even if outside of tradeJOB REQUIREMENTS:, • Qualified with the American Welding Society, AWS D1.1 and AWS D1.8 (Copies of qualified records are required), • Structural/Pipe Welder with Structural & Pipe Welding Certification (Dated With in last 2 Years), • 2+ years’ construction industry experience on overseas projects, • Ability to read and understand blueprints, • Ability to read and interpret job specifications, • Basic understanding of construction principles and procedures, • High school diploma or equivalent, • Thorough knowledge of the safe and effective use of hand tools and power tools to perform assigned duties, • Flexibility in working overseas, • Understanding and adherence to local laws and customs in host country, • Following all Government site security requirements to maintain eligibility to work on project site, • Ability to take direction and work well with others, including third country nationalist (TCNs) along with meeting attendance requirements necessary to keep job on schedule and adherence to safety protocols PHYSICAL, MENTAL AND ENVIRONMENTAL DEMANDS: The demands described here are not exhaustive, but are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions in accordance with applicable law, provided that the individual does not pose a direct threat to the health or safety of the employee or others when performing such essential functions. Physical Demands: While performing the duties of this job, the employee is regularly required to, among other things, use hands to grasp and reach up with arms overhead, including manual dexterity to perform assigned duties. The employee must have the ability to regularly and for extended periods of time stoop, squat, stand, walk, twist, balance, climb (ladder and stairs of high-rise building), kneel, crouch, speak, carry, and hear. The employee will be required to work from a ladder, scaffold or elevated work platform or man lift for extended periods. There is a minimal demand for sitting, other than during periods of extended travel (such as to and from the project location). The employee must have the ability to regularly lift, carry, push or pull and move objects weighing up to approximately 50 pounds of weight without assistance. The employee will also need to occasionally lift, carry, push or pull and move objects exceeding 50 pounds without assistance. May involve frequent repetitive motions. The job imposes a substantial demand for physical agility and mobility, including the ability to balance, ambulate and maneuver safely over rough and uneven terrain throughout the work site. This position will require the use of personal protective equipment during various tasks and activities. The minimum Personal Protective Equipment required on the Project Site include hardhat, safety glasses and steel-toed safety shoes. The employee must be able to hear warning sounds and alarms, communicate effectively with coworkers and follow written and spoken instructions. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Mental Demands: The position requires a high degree of concentration in a busy environment. There is a substantial demand for analyzing, perceiving, comprehending, rapid decision making and exercising sound judgment to ensure individual and coworker safety in a potentially dangerous environment. Ability to follow directions and meet deadlines is critical. Environmental Demands: The position entails working on a busy construction site overseas, generally away from the employee’s family, and in countries whose laws and social norms may be much more restrictive than in the United States, with the potential for occasional periods of social unrest, military action, interruption of normal services such as electricity and water, natural disasters, and the like. Work involves a 60-hour workweek, 6 days a week/ 10 hours per day. Flexibility with hours/days is required. Individuals must have comfort working in a high-stress environment and be able to perform the above activities in extreme hot, cold, humid, and wet conditions depending on location and season. Frequent exposure to construction equipment and sharp tools, including power tools, and materials. Some exposure to toxic/caustic chemicals, potential electric shock, significant heights and high noise level, including high-pitched noises. Some potential exposure to dust, fumes, smoke and airborne particles. American International Contractors, Inc. is an EEO/AA/Disability/Vets Employer Powered by JazzHR GeT8Byr9On

Job Description Overview Tradesmen International is immediately hiring experienced Combo Welders for projects located in the Washington, DC area. This is a first shift opportunity, and the pay rate is up to $32/hour based on experience and skill level. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Weld rails, pipes, beams, and girders using MIG (GMAW), • Set up MIG welding equipment for various tasks, • Perform structural and pipe welds to specification, • Follow all safety protocols and maintaining a clean work area Responsibilities • Must have welding certification Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job DescriptionDescription: Capitol Boiler Works, Inc. is a well-established mechanical contracting company offering true 24/7/365 service in all mechanical crafts. CBW serves the DC Metro area and parts of West Virginia and Delaware, with offices in Springfield, VA, Richmond, VA, Hebron MD, and Baltimore, MD. Our primary focus is commercial and industrial customers in the region, with a specialty in property management companies. Capitol Boiler Works, Inc. is a privately held company serving the region since 1936. CBW is currently seeking the right individual to fill a full-time opening for Commercial Welder/Fabricator. We offer a competitive benefits package including: • Medical, • Dental, • Vision, • Life & Disability, • Supplemental Ins., • 401k, • Flexible Spending Account (FSA), • Health Savings Account (HSA) ESSENTIAL DUTIES AND RESPONSIBILITIES may include any/all of the following: • Lays out, positions, and secures parts and assembles according to specifications, using straight edge, combination square, calipers, and ruler., • Tack-welds or welds components and assembles using electric, gas, arc, or other welding equipment., • Cuts work piece, using powered saws hand shears or chipping knife., • Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form., • Installs or repairs equipment such as lead pipes, valves, floors, and tank linings., • Observes tests on welded surfaces such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications., • Inspects grooves, angles, or gap allowances using a micrometer, caliper, and precision measuring instruments., • Removes rough spots from work piece, using portable grinder, hand file or scraper., • Welds components in flat, vertical, or overhead positions., • Heats, forms, and dresses metal parts using hand tools, torch, or arc welding equipment., • Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc/, • Analyzes engineering drawing and specifications to play layout, assembly, and welding operations., • Develops templates and other work aids to hold and align parts., • Use safe work habits and operate safety equipment properly., • Determines equipment and welding method, applying knowledge or metallurgy, geometry, and welding techniques., • Examine workpieces for defects., • Measure workpieces with straightedges or templates to meet specifications., • Primarily uses stick welding 60-10 and 70-18. Need to be able to certify in 6G position., • Documents tests and inspection dates and results., • Maintains inventory records for welding supplies used and utilized on jobs., • Use straightedges, combination squares, rulers, and calipers to lay out, position, alight, and secure parts and assemblies prior to assembly., • Operate hand and power tools such as shielded metal arc and gas metal arc welding equipment., • Completes work orders, list materials issued and used, and documents work repairs., • Assists area staff as needed., • Ensures that management is appropriately informed of area activities and of any significant problems., • Ensures regulatory requirements and established procedures are met., • Follows safety requirements., • Ensures that work area is clean, secure, and well maintained., • Completes special projects as assigned., • Attends and participates in meetings as required Apprentices shall perform all duties listed above under the guidance of a journeyman mechanic combined with on-the-job training and any additional schooling as required. Requirements: EDUCATION AND EXPERIENCE • High school education/G.E.D., • At least 3 years of experience in welding (Prior certification required). LANGUAGE SKILLS • Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar., • Ability to write complex sentences, using proper punctuation, and using adjectives and adverbs., • Able to communicate in complex sentences, using normal word order with present and past tenses with good vocabulary. QUALIFICATION STANDARDS • Ability to perform essential job functions consistent safely and successfully with ADA, FMLA, and other federal, state, and local standards/requirements., • Ability to meet and maintain all qualitative and/or quantitative productivity standards., • Ability to maintain reasonably regular and punctual attendance consistent with ADA, FMLA and other federal, state, and local standards/requirements., • Compliance with all personnel policies and practices., • Ability to comprehend and carry out safety sensitive duties according to company policies, procedures, and safe work practices.

Job Description VMG is seeking an experienced Welder to support large-scale commercial HVAC and plumbing construction projects. This role is responsible for performing high-quality welding and fabrication work in accordance with project specifications, safety standards, and applicable codes. Key Responsibilities Perform welding on carbon steel, stainless steel, and other materials used in HVAC and plumbing systems Fabricate, assemble, and install piping components per project drawings and specifications Read and interpret blueprints, shop drawings, and isometric drawings Ensure welds meet quality standards and pass inspections Maintain compliance with safety regulations, company policies, and jobsite requirements Inspect welds and make necessary repairs or adjustments Collaborate with foremen, superintendents, and field crews to meet project schedules Job Requirements 2+ years of welding experience in commercial construction (HVAC or plumbing preferred) Proficiency in welding processes such as Stick (SMAW), MIG (GMAW), and/or TIG (GTAW) Ability to read and understand construction drawings and welding symbols Knowledge of welding safety practices and procedures Experience working with piping systems is strongly preferred Ability to work in confined spaces, on ladders, and at heights Ability to lift: Up to 10 lbs regularly Up to 50 lbs frequently Over 75 lbs occasionally with assistance Willingness to travel to job sites throughout the DMV area Preferred Qualifications Welding certifications (AWS, ASME, or equivalent) Experience with commercial HVAC piping or plumbing systems Familiarity with local building and safety codes Why Join VMG? Vertical Mechanical Group is a full-service HVAC and Plumbing contractor specializing in large-scale commercial projects. We offer competitive pay, steady work, growth opportunities, and a strong safety-first culture.

Job DescriptionWork Schedule • Shift: MondayFriday, • Working Hours: 7:30 AM 4:00 PMRequired Experience & Qualifications, • Minimum 5 years of hands-on TIG & MIG welding experience, • Experience working as a Shop Welder & Assembler, • Able to read and interpret engineering drawings/blueprints, • Fluent English communication skills, • Strong fabrication, fitting, and assembly experience, • Able to work independently with minimal supervision, • Strong attention to detail and quality workmanship, • Reliable with a stable work historyPrimary Responsibilities, • Perform TIG and MIG welding on steel and metal components, • Assemble fabricated parts according to engineering drawings, • Read and interpret blueprints and work orders, • Ensure weld quality meets company standards, • Inspect finished work for accuracy and quality, • Operate welding and fabrication equipment safely, • Maintain a clean and organized work area, • Follow all workplace health and safety proceduresCandidate Profile The ideal candidate should have: • 5+ years of TIG & MIG welding experience, • Experience in a manufacturing or fabrication shop, • Strong blueprint-reading ability, • Excellent fitting and assembly skills, • Good communication skills in English, • Available to work the day shift (7:30 AM 4:00 PM), • Located in or willing to commute to Mississauga, ON

This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $65,000 - $100,000 per year A bit about us: Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company. We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing. Why join us? • Accelerated Career Growth!, • Competitive Base Salary and Bonus! Job Details Job Details: We are seeking a dynamic and experienced Welding Engineer to join our team. This is a permanent position in the manufacturing industry where you will be tasked with the responsibility of designing, implementing, maintaining, and improving welding applications. You will also be responsible for ensuring the highest quality of welding work is achieved and that it meets all the relevant safety and technical standards. Responsibilities: • Provide technical support to production staff and troubleshoot welding related issues., • Design and implement new welding processes or improve existing ones to enhance efficiency and profitability., • Conduct research and development activities to improve welding techniques, procedures, and applications., • Perform welding procedure and welder performance qualifications in accordance with required codes and standards., • Develop and implement welding standards and procedures to guide production and welding personnel in the manufacturing process., • Work closely with design and engineering teams to ensure the manufacturability of new designs and improve production processes., • Provide training and guidance to production staff on advanced welding techniques and technologies., • Collaborate with quality control teams to establish quality standards and specifications, and to ensure these standards are met., • Utilize CAD software to design and optimize welding fixtures and tooling., • Implement Lean manufacturing principles to improve efficiency and reduce waste., • Operate and program robotic and laser welding machines. Qualifications: • Bachelor’s degree in Welding Engineering, Mechanical Engineering, or a related field., • A minimum of 2 years’ experience in a similar role within the manufacturing industry., • Strong knowledge of welding processes, procedures, and safety standards., • Proficiency in CAD software., • Experience with Lean manufacturing principles., • Experience with robotic and laser welding., • Ability to read and interpret blueprints and engineering plans., • Excellent problem-solving skills and attention to detail., • Strong communication and interpersonal skills., • Ability to work in a fast-paced, high-pressure environment., • Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification would be an advantage. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Experienced sub arc welder mig and fluxcore. Very clean bead. Has good work history. Work hours: $25-$26 hr day shift 6:00a-4:30m night shift 4:30pm - 3:00am

Job Category: Field/Yard/Production Full-Time On-site SJ Hamill Charleston, SC 29405, USA Role Overview: The Welder is responsible for performing basic welding and steel fabrication tasks in support of the production of structural steel components for construction projects. This position involves reading shop drawings, measuring, cutting, fitting, and welding steel parts according to specified tolerances and quality standards. Primary Responsibilities • Interpret and use prints and sketches to perform layout and welding techniques for structural steel fabrication., • Perform general material handling functions, such as; jobsite clean-up and moving of materials by hand., • Operate motorized equipment including welding, air arcing, bolting, grinding, use of cutting torch, hammers, reamers, tape measures and overhead crane operation., • Perform all job duties following company safety rules and proper use of assigned personal protective equipment. Minimum Qualifications • Certified Welder specializing in field operations, with proven ability to complete structural and equipment welding at remote job sites., • Knowledge and ability to interpret and use prints and sketches to perform layout and welding techniques for structural steel fabrication., • Pass AWS Welding Test on a one-inch groove test in the horizontal position., • Ability to frequently lift, carry, push and pull up to 50 pounds of material., • Ability to frequently walk, stoop, kneel, reach and climb., • Ability to successfully use hand tools such as those listed under position responsibilities., • Work requires alert individuals with good balance and physical strength., • Experience with heavy flux core wire feed welding., • TWIC card preferred but not required. Ability to obtain one is required. What We Can Offer You • Inclusive Medical, Dental, Vision, Accident, and Illness insurance, • Company paid Disability and Life insurance, • Health Savings Account contribution of up to $1,000 per year, • 401(k) retirement savings program with a company match, • Employee Assistance Program including discounts with major vendors & products, • Mental and physical wellness programs, • Competitive time off package including vacation, sick, and holiday pay, • Career advancement opportunities with a stable well-established organization, • Tuition reimbursement program and access to LinkedIn Learning courses SJ Hamill Construction is an Equal Opportunity Employer. Qualified candidates will be considered without regard to race, sex, disability, veteran status, sexual orientation, or gender identity.

Tradesmen International - - Responsibilities: Weld rails, pipes, beams, and girders using MIG (GMAW); Set up MIG welding equipment for various tasks; Perform structural and pipe welds to specification; Follow all safety protocols; Maintain a clean work area.

Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair all machinery.Assess welded surfaces, str

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.

Experience as a Pipe Welder or Mechanical Pipe Welder. We are seeking a skilled Mechanical Pipe Welder to join our growing construction team.

Required Tool List For Pipe Welder:.

This role is responsible for overseeing plumbing and piping installations, coordinating with project management, and ensuring work is completed safely, on schedule, and in compliance with project specifications.Supervise plumbing and pipefitting crews on commercial construction projects.Install and

Vulcan Materials Company - - Responsibilities: Promote safety and ensure compliance with MSHA and Vulcan standards; Repair and maintain plant equipment (screens, conveyor belts, crushers, pumps); Inspect equipment and structures daily; Monitor processes and materials in crushing, washing, and scree

Vulcan Materials Company - 10000 Ox Road - Responsibilities: Inspect equipment before and after shifts and perform scheduled maintenance; Troubleshoot and replace basic mechanical components (conveyors, pumps); Perform structural repairs including welding and fabrication; Rebuild and fabricate parts

Dover - South Chesterfield Road - Responsibilities: Read and comprehend an 'A' order and work order; Identify and place parts on the assigned product line; Assemble units using hand and power tools; Perform preventive maintenance on equipment and tooling; Work at multiple stations to meet production

Dover - South Chesterfield Road - Responsibilities: Assemble or produce component parts into subassemblies and units following standard work instructions; Inspect parts and completed units using gauges, calipers, tape measures, and fixtures; Perform end-of-line product checks and repairs as needed;

Dover - South Chesterfield Road - Responsibilities: Read and comprehend an order and work orders; Identify parts used on the assigned product line and their placement; Use material gauging and dimensioning information; Assemble parts using bolts, screws, rivets, and fasteners; Perform preventative m

Erickson Senior Living - - Responsibilities: Perform maintenance of HVAC equipment as assigned; Perform all necessary scheduled preventive maintenance procedures on designated equipment; Respond to emergency calls for system and equipment failure; Serve as the lead mechanic in assigned area(s) and

Amrize - - Responsibilities: Operate milling machines to remove asphalt and concrete surfaces to specified depths and grades; Monitor machine performance, material flow, and cutting depth to ensure smooth, even milling; Adjust milling equipment settings to meet project specifications and surface re

Dover - South Chesterfield Road - Responsibilities: Fabricate assemblies / parts for products and changes to existing products per engineering documents and established production standards; Set-up, and lay out work using fixtures and guides to fabricate parts and assemblies; Arrange parts for fabri

MedStar Health - - Responsibilities: Perform daily routine maintenance rounds and inspections of mechanical rooms, equipment, buildings, and facilities.Perform preventive maintenance on equipment, machinery, buildings, and facilities and maintain work orders/logs.Respond to customer service calls a

Erickson Senior Living - - Responsibilities: Perform routine and emergency repairs in residential apartments and public areas including correcting electrical malfunctions, repairing and replacing plumbing fixtures, pipes and fittings, repairing and replacing light bulbs and fixtures, repairing door

Breakthru Beverage Group - - Responsibilities: Perform general maintenance tasks including HVAC, electrical, and plumbing elements; Coordinate with external vendors for maintenance and repairs; Inspect warehouse equipment and assist with dock equipment maintenance; Assist Tier 2 and Tier 3 technici

Aerotek - JobID: JP-005850862 [Maintenance Technician] As a Maintenance Mechanic at Aerotek, you'll: Install or replace machinery, equipment, and new or replacement parts and instruments; Initiate and complete work orders using the Computerized Maintenance Management System (CMMS); Observe mechanica

Dover - South Chesterfield Road - Responsibilities: Load and unload materials safely and accurately; Operate forklifts, hand trucks, hoists, conveyors and other handling equipment; Maintain inventory accuracy and assist in cycle counting; Transfer, transport and stage materials and maintain warehous

UPS - 8200 Alban Road - Responsibilities: Troubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s )

Dover - South Chesterfield Road - Responsibilities: Fabricate assemblies and parts for products per engineering documents and production standards; Set up and lay out work using fixtures to fabricate parts; Review finished assemblies against drawings and BOMs; Report fabrication issues and assist in

GreyStar - Esplanade at National Harbor [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, an

CJ Logistics - South Chesterfield Road - Responsibilities: Safely operate stand-up or sit-down forklifts to keep orders moving; Load, unload, pick, put away, and consolidate pallets; Manual case picking when directed; Prepare and ship products with accuracy and care; Conduct outbound load audits, co

Coca Cola - - Responsibilities: Retrieve and place quantities of product onto pallets as instructed by pick tickets; Transport pallets using a Powered Industrial Truck (PIT) such as Pallet Jack; Assist with warehouse cleanliness and housekeeping; Perform daily PIT checklist and report issues; Suppo

Aerotek - - Responsibilities: Prepare, mix, and process specialty inks according to detailed formulations and batch instructions; Operate and monitor mixing equipment, mills, and associated machinery; Perform in-process quality checks (viscosity, color matching, density, etc.Document batch records,

PrideStaff - - Responsibilities: Set up and operate specialized production printing machines to customize items according to customer designs and branding requests; Prepare and align customer logos, artwork, and printing specifications prior to production runs; Monitor machine performance continuou

HireTalent - South Chesterfield Road - Responsibilities: Fabricate assemblies / parts for products and changes to existing products per engineering documents and established production standards; Set-up, and Client out work using fixtures and guides to fabricate parts and assemblies; Arrange parts f

Coca Cola - - Responsibilities: Retrieves and places quantities of cases onto a pre-determined pallet as instructed by the Pick Ticket to build stable pallets; Travels to and transports pallets of stacked product to different areas of the warehouse using a Powered Industrial Truck Pallet Jack; Assi