Environmental manager jobs in CheltenhamCreate job alerts

Job Description QHSE Advisor\n \nAbout the Company\n A leading manufacturer is seeking an experienced QHSE Manager to drive continuous improvement across Quality, Health, Safety and Environmental performance. The business is committed to sustainable manufacturing, operational excellence and maintaining the highest standards of compliance. The Role\n This is a full-time, site-based position. The QHSE Manager will be responsible for overseeing the company's Quality, Health, Safety and Environmental systems, ensuring compliance with legislation and industry standards, promoting a positive safety culture and driving continuous improvement across the business. Key Responsibilities\n \n Manage and continuously improve the Integrated Management System (IMS). \n Lead external certification and compliance audits. \n Conduct internal audits and monitor compliance across all business processes. \n Coordinate and review risk assessments with operational teams. \n Implement corrective and preventative actions following audits and inspections. \n Lead investigations into accidents, incidents and near misses, identifying root causes and implementing improvements. \n Promote a proactive QHSE culture through effective communication and employee engagement. \n Provide expert advice and guidance on quality, health, safety and environmental matters. \n Deliver QHSE training and support to employees at all levels. \n Ensure compliance with all relevant legislation, standards and company procedures. \n About You\n \n Experience managing Quality, Health, Safety and Environmental systems. \n Strong knowledge of EHS legislation and best practice. \n Experience conducting accident and incident investigations. \n Confident delivering QHSE training and coaching employees. \n Excellent analytical and problem-solving skills. \n Strong communication and stakeholder management abilities. \n Relevant QHSE qualifications and certifications. \n Previous experience within manufacturing, industrial or engineering environments is desirable. \n \n \n JBRP1_UKTJ

Job Description QHSE Advisor\n \nAbout the Company\n A leading manufacturer is seeking an experienced QHSE Manager to drive continuous improvement across Quality, Health, Safety and Environmental performance. The business is committed to sustainable manufacturing, operational excellence and maintaining the highest standards of compliance. The Role\n This is a full-time, site-based position. The QHSE Manager will be responsible for overseeing the company's Quality, Health, Safety and Environmental systems, ensuring compliance with legislation and industry standards, promoting a positive safety culture and driving continuous improvement across the business. Key Responsibilities\n \n Manage and continuously improve the Integrated Management System (IMS). \n Lead external certification and compliance audits. \n Conduct internal audits and monitor compliance across all business processes. \n Coordinate and review risk assessments with operational teams. \n Implement corrective and preventative actions following audits and inspections. \n Lead investigations into accidents, incidents and near misses, identifying root causes and implementing improvements. \n Promote a proactive QHSE culture through effective communication and employee engagement. \n Provide expert advice and guidance on quality, health, safety and environmental matters. \n Deliver QHSE training and support to employees at all levels. \n Ensure compliance with all relevant legislation, standards and company procedures. \n About You\n \n Experience managing Quality, Health, Safety and Environmental systems. \n Strong knowledge of EHS legislation and best practice. \n Experience conducting accident and incident investigations. \n Confident delivering QHSE training and coaching employees. \n Excellent analytical and problem-solving skills. \n Strong communication and stakeholder management abilities. \n Relevant QHSE qualifications and certifications. \n Previous experience within manufacturing, industrial or engineering environments is desirable. \n \n \n JBRP1_UKTJ

Job Description QHSE Advisor\n \nAbout the Company\n A leading manufacturer is seeking an experienced QHSE Manager to drive continuous improvement across Quality, Health, Safety and Environmental performance. The business is committed to sustainable manufacturing, operational excellence and maintaining the highest standards of compliance. The Role\n This is a full-time, site-based position. The QHSE Manager will be responsible for overseeing the company's Quality, Health, Safety and Environmental systems, ensuring compliance with legislation and industry standards, promoting a positive safety culture and driving continuous improvement across the business. Key Responsibilities\n \n Manage and continuously improve the Integrated Management System (IMS). \n Lead external certification and compliance audits. \n Conduct internal audits and monitor compliance across all business processes. \n Coordinate and review risk assessments with operational teams. \n Implement corrective and preventative actions following audits and inspections. \n Lead investigations into accidents, incidents and near misses, identifying root causes and implementing improvements. \n Promote a proactive QHSE culture through effective communication and employee engagement. \n Provide expert advice and guidance on quality, health, safety and environmental matters. \n Deliver QHSE training and support to employees at all levels. \n Ensure compliance with all relevant legislation, standards and company procedures. \n About You\n \n Experience managing Quality, Health, Safety and Environmental systems. \n Strong knowledge of EHS legislation and best practice. \n Experience conducting accident and incident investigations. \n Confident delivering QHSE training and coaching employees. \n Excellent analytical and problem-solving skills. \n Strong communication and stakeholder management abilities. \n Relevant QHSE qualifications and certifications. \n Previous experience within manufacturing, industrial or engineering environments is desirable. \n \n \n JBRP1_UKTJ

Job Description QHSE Advisor\n \nAbout the Company\n A leading manufacturer is seeking an experienced QHSE Manager to drive continuous improvement across Quality, Health, Safety and Environmental performance. The business is committed to sustainable manufacturing, operational excellence and maintaining the highest standards of compliance. The Role\n This is a full-time, site-based position. The QHSE Manager will be responsible for overseeing the company's Quality, Health, Safety and Environmental systems, ensuring compliance with legislation and industry standards, promoting a positive safety culture and driving continuous improvement across the business. Key Responsibilities\n \n Manage and continuously improve the Integrated Management System (IMS). \n Lead external certification and compliance audits. \n Conduct internal audits and monitor compliance across all business processes. \n Coordinate and review risk assessments with operational teams. \n Implement corrective and preventative actions following audits and inspections. \n Lead investigations into accidents, incidents and near misses, identifying root causes and implementing improvements. \n Promote a proactive QHSE culture through effective communication and employee engagement. \n Provide expert advice and guidance on quality, health, safety and environmental matters. \n Deliver QHSE training and support to employees at all levels. \n Ensure compliance with all relevant legislation, standards and company procedures. \n About You\n \n Experience managing Quality, Health, Safety and Environmental systems. \n Strong knowledge of EHS legislation and best practice. \n Experience conducting accident and incident investigations. \n Confident delivering QHSE training and coaching employees. \n Excellent analytical and problem-solving skills. \n Strong communication and stakeholder management abilities. \n Relevant QHSE qualifications and certifications. \n Previous experience within manufacturing, industrial or engineering environments is desirable. \n \n \n JBRP1_UKTJ

Job Description QHSE Advisor\n \nAbout the Company\n A leading manufacturer is seeking an experienced QHSE Manager to drive continuous improvement across Quality, Health, Safety and Environmental performance. The business is committed to sustainable manufacturing, operational excellence and maintaining the highest standards of compliance. The Role\n This is a full-time, site-based position. The QHSE Manager will be responsible for overseeing the company's Quality, Health, Safety and Environmental systems, ensuring compliance with legislation and industry standards, promoting a positive safety culture and driving continuous improvement across the business. Key Responsibilities\n \n Manage and continuously improve the Integrated Management System (IMS). \n Lead external certification and compliance audits. \n Conduct internal audits and monitor compliance across all business processes. \n Coordinate and review risk assessments with operational teams. \n Implement corrective and preventative actions following audits and inspections. \n Lead investigations into accidents, incidents and near misses, identifying root causes and implementing improvements. \n Promote a proactive QHSE culture through effective communication and employee engagement. \n Provide expert advice and guidance on quality, health, safety and environmental matters. \n Deliver QHSE training and support to employees at all levels. \n Ensure compliance with all relevant legislation, standards and company procedures. \n About You\n \n Experience managing Quality, Health, Safety and Environmental systems. \n Strong knowledge of EHS legislation and best practice. \n Experience conducting accident and incident investigations. \n Confident delivering QHSE training and coaching employees. \n Excellent analytical and problem-solving skills. \n Strong communication and stakeholder management abilities. \n Relevant QHSE qualifications and certifications. \n Previous experience within manufacturing, industrial or engineering environments is desirable. \n \n \n JBRP1_UKTJ

Job Description QHSE Advisor\n \nAbout the Company\n A leading manufacturer is seeking an experienced QHSE Manager to drive continuous improvement across Quality, Health, Safety and Environmental performance. The business is committed to sustainable manufacturing, operational excellence and maintaining the highest standards of compliance. The Role\n This is a full-time, site-based position. The QHSE Manager will be responsible for overseeing the company's Quality, Health, Safety and Environmental systems, ensuring compliance with legislation and industry standards, promoting a positive safety culture and driving continuous improvement across the business. Key Responsibilities\n \n Manage and continuously improve the Integrated Management System (IMS). \n Lead external certification and compliance audits. \n Conduct internal audits and monitor compliance across all business processes. \n Coordinate and review risk assessments with operational teams. \n Implement corrective and preventative actions following audits and inspections. \n Lead investigations into accidents, incidents and near misses, identifying root causes and implementing improvements. \n Promote a proactive QHSE culture through effective communication and employee engagement. \n Provide expert advice and guidance on quality, health, safety and environmental matters. \n Deliver QHSE training and support to employees at all levels. \n Ensure compliance with all relevant legislation, standards and company procedures. \n About You\n \n Experience managing Quality, Health, Safety and Environmental systems. \n Strong knowledge of EHS legislation and best practice. \n Experience conducting accident and incident investigations. \n Confident delivering QHSE training and coaching employees. \n Excellent analytical and problem-solving skills. \n Strong communication and stakeholder management abilities. \n Relevant QHSE qualifications and certifications. \n Previous experience within manufacturing, industrial or engineering environments is desirable. \n \n \n JBRP1_UKTJ

Job Description QHSE Advisor\n \nAbout the Company\n A leading manufacturer is seeking an experienced QHSE Manager to drive continuous improvement across Quality, Health, Safety and Environmental performance. The business is committed to sustainable manufacturing, operational excellence and maintaining the highest standards of compliance. The Role\n This is a full-time, site-based position. The QHSE Manager will be responsible for overseeing the company's Quality, Health, Safety and Environmental systems, ensuring compliance with legislation and industry standards, promoting a positive safety culture and driving continuous improvement across the business. Key Responsibilities\n \n Manage and continuously improve the Integrated Management System (IMS). \n Lead external certification and compliance audits. \n Conduct internal audits and monitor compliance across all business processes. \n Coordinate and review risk assessments with operational teams. \n Implement corrective and preventative actions following audits and inspections. \n Lead investigations into accidents, incidents and near misses, identifying root causes and implementing improvements. \n Promote a proactive QHSE culture through effective communication and employee engagement. \n Provide expert advice and guidance on quality, health, safety and environmental matters. \n Deliver QHSE training and support to employees at all levels. \n Ensure compliance with all relevant legislation, standards and company procedures. \n About You\n \n Experience managing Quality, Health, Safety and Environmental systems. \n Strong knowledge of EHS legislation and best practice. \n Experience conducting accident and incident investigations. \n Confident delivering QHSE training and coaching employees. \n Excellent analytical and problem-solving skills. \n Strong communication and stakeholder management abilities. \n Relevant QHSE qualifications and certifications. \n Previous experience within manufacturing, industrial or engineering environments is desirable. \n \n \n JBRP1_UKTJ

Job Description QHSE Advisor\n \nAbout the Company\n A leading manufacturer is seeking an experienced QHSE Manager to drive continuous improvement across Quality, Health, Safety and Environmental performance. The business is committed to sustainable manufacturing, operational excellence and maintaining the highest standards of compliance. The Role\n This is a full-time, site-based position. The QHSE Manager will be responsible for overseeing the company's Quality, Health, Safety and Environmental systems, ensuring compliance with legislation and industry standards, promoting a positive safety culture and driving continuous improvement across the business. Key Responsibilities\n \n Manage and continuously improve the Integrated Management System (IMS). \n Lead external certification and compliance audits. \n Conduct internal audits and monitor compliance across all business processes. \n Coordinate and review risk assessments with operational teams. \n Implement corrective and preventative actions following audits and inspections. \n Lead investigations into accidents, incidents and near misses, identifying root causes and implementing improvements. \n Promote a proactive QHSE culture through effective communication and employee engagement. \n Provide expert advice and guidance on quality, health, safety and environmental matters. \n Deliver QHSE training and support to employees at all levels. \n Ensure compliance with all relevant legislation, standards and company procedures. \n About You\n \n Experience managing Quality, Health, Safety and Environmental systems. \n Strong knowledge of EHS legislation and best practice. \n Experience conducting accident and incident investigations. \n Confident delivering QHSE training and coaching employees. \n Excellent analytical and problem-solving skills. \n Strong communication and stakeholder management abilities. \n Relevant QHSE qualifications and certifications. \n Previous experience within manufacturing, industrial or engineering environments is desirable. \n \n \n JBRP1_UKTJ

Job Description Summary As a Test Systems Technical Lead, you will be responsible for the technical direction, definition, and delivery of test system solutions across Power Distribution and Controls programs. You will own the technical solution for your product/project area, ensuring that test systems meet Safety, Quality, customer, regulatory, and business requirements while supporting program Delivery and Cost objectives. Working as part of an Integrated Product Development Team (IPDT), you will lead the full test systems lifecycle from initial requirements capture through design, implementation, verification, release, and in-service support. You will demonstrate strong technical leadership, collaborate closely with Program and Engineering Project Managers, and provide guidance, coaching, and mentoring to engineers in the test systems team. • Test Systems Lifecycle Ownership Own the technical solution for test systems in your product/project area, ensuring alignment to customer, regulatory, and internal requirements. Lead the full Test Systems life cycle from concept and requirements definition through design, implementation, verification, formal release, and in-service support. Execute requirements, design, implementation, and verification using sound engineering principles, adhering to business standards, procedures, and program requirements. Ensure test equipment solutions are suitable for qualification, EMC, system verification, and production support, in line with DO-160, MIL-STD-461 and similar standards., • Technical Leadership Own the technical direction and accountability for test systems within your project to meet customer and derived requirements. Monitor and steer the technical solution, ensuring rigor in design and technical reviews for your test solution. Collaborate with the Designated Technical Authority (DTA) to ensure test system architectures and strategies are aligned to the overall product architecture. Engage SMEs and Chief Engineer’s Office as needed to resolve complex technical issues, de‑risk solutions, and ensure compliance with internal design guidelines. Ensure adherence to project plans, company and industry standards, and appropriate application of DTC (Design to Cost) and DFM (Design for Manufacture) / DFT (Design for Test) principles for test solutions., • Budget / Schedule / Scope Support Support the Control Account Manager (CAM) and EPM in delivering the technical solution to the agreed scope, schedule, and budget for your project. Protect against internal and external scope creep for the test system, identifying potential changes early and supporting mitigation. Clearly communicate technical expectations to the engineering team, including definition of done, entry/exit criteria, and required deliverables. Support work package planning (e.g., rolling wave planning, milestones, and estimates) and provide input to technical metrics to monitor progress and health of test activities. Provide timely technical inputs to program reviews, Toll Gates, forecast updates, and risk & opportunity reviews as requested by EPM/PM., • Cross-functional Collaboration and Customer Interface Act as the engineering interface to Program Management on test systems topics, clearly articulating technical direction, risks, and decisions. Liaise and interface with Systems, Hardware, Software, Manufacturing, Sustaining, Quality, Supply Chain, and Lab Operations to ensure integrated and robust test solutions. Support Program Manager and EPM in customer and certification discussions related to test system capability, coverage, readiness, and evidence. Ensure alignment and coordination with Manufacturing Program Manager (Launch Leader) and production test stakeholders regarding test strategy, manufacturability, and transition to production test environments., • Governance, Documentation, and Compliance Assure proper documentation of technical data generated for test systems in line with engineering policies, configuration control, and quality requirements. Ensure test system requirements, design artefacts, verification evidence, and configuration baselines are defined, maintained, and traceable. Participate as presenter or reviewer in technical, design, and program reviews (including CEO/DTA reviews where applicable), ensuring issues, risks, and lessons learned are captured and addressed. Support change management activities for test systems, providing technical impact assessments for scope/schedule changes and feeding into program BCRs as required., • People Leadership, Coaching and Behaviours Provide technical guidance and leadership to engineers and technicians working on test systems, ensuring clarity of priorities, deliverables, and standards. Coach, mentor, and train less experienced engineers, actively building technical capability and succession in the test systems community. Model and reinforce GE Leadership Behaviours – Act with Humility, Lead with Transparency, Deliver with Focus – and the supporting core values of Leading, Influencing, and Collaborating. Demonstrate and promote key team behaviours, including risk identification and mitigation, proactive information sharing, collaborative decision making, constructive feedback, problem solving, and driving Lean and cost out. Provide timely communications on significant technical issues or developments and use the defined escalation paths (Tech Lead/CAM → EPM → Subsection Manager/PMO → PM → senior leadership) where resolution is blocked or risks escalated. Degree in Electrical, Electronic, or Software Engineering, or equivalent knowledge and experience. Significant experience in test system design, development, and integration, including hardware/software integration for complex systems, ideally in aviation or other high integrity/safety‑critical environments. Demonstrated experience in qualification and EMC test equipment design, with working knowledge/awareness of DO‑160, MIL‑STD‑461 or equivalent environmental and EMC standards. Proven technical leadership experience delivering solutions to agreed scope, schedule, cost, and quality, preferably as a Technical Lead, CAM, or equivalent within a project environment. Strong problem‑solving and solution‑building skills, with the ability to break down complex problems, identify options, and drive to resolution. Excellent communication skills, able to clearly convey complex technical topics to engineering teams, program management, customers, and leadership. Evidence of independent and sound technical judgement, including identifying when to escape and when to seek DTA/CEO guidance. Demonstrable success in achieving and exceeding customer and program milestones for test system or product deliveries. Proven ability to deliver solutions on time, within budget, and to the required quality, operating effectively across TG3–TG9 project phases. Positive attitude, initiative, and proactiveness, with enthusiasm for continuous improvement, Lean thinking, and cost‑out in test solutions. Experience mentoring and developing engineers, including delegating technical work, providing feedback, and supporting career development. Experience with aircraft power distribution systems verification laboratories or similar system integration/verification environments. Ability to gather support from multiple stakeholders and influence cross‑functional teams, leveraging strong product and architecture understanding. Demonstrated collaboration across global, multi‑function teams, creating environments where customer‑centric creativity and outside‑in thinking are encouraged. The Test Systems Technical Lead is expected to: Lead complex, cross‑functional technical workstreams within programs, often spanning multiple products or platforms. Serve as the primary technical escalation point for test systems in their area, while using defined escalation paths for unresolved issues. Set high standards for safety, quality, and compliance, and actively drive continuous improvement in test strategies, methods, and tools. Act with humility, lead with transparency, and deliver with focus, always with unyielding integrity. GE Aerospace supports and encourages flexible working arrangements, where possible, and recognises the benefits to employees of having a positive work‑life balance. • Non‑contributory Pension, • Life Assurance, • Group income protection, • Private medical cover, • Holiday Hourly equivalent of 26 days, with flexible option to buy or sell, • Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that BPSS clearance cannot be obtained, you may not be eligible for the role and/or any offer of employment may be withdrawn on grounds of national security. Please see the link below for further details regarding the requirements for BPSS clearance: BPSS Right to Work Applications from job seekers who require sponsorship to work in the UK are welcome and will be considered alongside all other applications. However, under the applicable UK immigration rules as may be in place from time to time, it may be that candidates who do not currently have the right to work in the UK may not be appointed to a post if a suitably qualified, experienced and skilled candidate who does not require sponsorship is available to take up the post. For further information please visit the UK Visas and Immigration website. Relocation Assistance Provided: No At GE Aerospace, we invent the future of flight, lift people up, and bring them home safely. We are a world‑leading provider of jet engines, components, and integrated systems for commercial and military aircraft. At GE Aerospace, respect for people is core to our culture and commitment to FLIGHT DECK, our proprietary lean operating model. We attract, develop, and retain industry‑leading talent from all backgrounds and cultivate communities where people are respected and empowered to reach their fullest potential. For the people of GE Aerospace, their work isn't just a job. It's their passion and purpose. We work and win as one team, accountable to each other and our customers, and we are always finding a better way to climb higher together. We were meant to fly. #J-18808-Ljbffr

Role overview of our Project Systems Architect This is a new role with significant responsibilities. We are seeking an experienced Project Systems Architect who will be a "key" colleague and responsible for the overarching design technical architecture and engineering solutions within Project Delivery. You will take a holistic view of the complete solution, ensuring that individual systems, subsystems and infrastructure components work together as an integrated whole. You will establish and maintain technical governance, understand dependencies and interfaces, and ensure that the implications of subsystem design and performance are identified and addressed from the outset These are complex, real-world programmes in which requirements, constraints and circumstances can evolve throughout delivery. The Project System Architect must therefore be able to anticipate the consequences of change, assess technical and programme-level trade-offs, and ensure that decisions continue to protect overall system performance, resilience, cost and schedule. A key aspect of the role is to provide technical direction, architectural governance and design authority across all engineering and technical disciplines working with engineers, ICP (In-Country Partner) and third party vendors to ensure all technical interaction is accounted for. The role will involve significant cross-functional and cross-departmental engagement to establish and maintain SRT's engineering reference architectures, technical standards, design principles and architectural governance. This will require close collaboration with Systems Development, Product Management, Project Engineering, Delivery and Support to ensure that architectural decisions are consistently applied throughout the product and project lifecycle. The role will also act as a senior technical authority for cross-disciplinary engineering decisions, providing assurance and sign-off where required and ensuring that solutions are technically robust, maintainable, scalable and capable of being deployed consistently across SRT's programmes and products. The role of Project Systems Architect is based from our Bristol office with flexibility for Hybrid working. This role will also require occasional overseas travel as required by the business • Provide significant technical leadership and support to the Project Engineering Manager, acting as a senior technical decision-maker and design authority within the Project Engineering function, • Work closely with the Global Engineering Lead during the handover of system designs into Project Engineering, ensuring that designs consider practical field deployment, installation, commissioning, maintainability and operational requirements, • Ensure that individual engineering disciplines are developed as part of a single integrated solution, rather than operating as independent technical silos, ensuring appropriate interfaces and dependencies are defined and managed, • Define and maintain architectural principles, design patterns and reference architectures that provide a consistent and reusable approach across projects and programmes, • Provide technical direction where architectural decisions cross multiple engineering disciplines, ensuring that the overall solution remains coherent and aligned with SRT's engineering strategy, • Act as the senior engineering escalation point for complex architectural and cross-disciplinary technical issues, providing recommendations and decisions where issues cannot be resolved within individual engineering workstreams, • Own and maintain the architectural governance process, including design reviews, technical deviations, design standards, technical risk, interface management and architectural decision-making., • Chair technical design reviews for significant or complex solutions where appropriate, • Ensure engineering solutions are designed with operationalisation, standardisation and re-use in mind, identifying opportunities to develop repeatable architectures, designs and engineering solutions that can be deployed across multiple projects, • Establish and maintain the appropriate division of design responsibility between and ICP, ensuring that design ownership, technical responsibilities, interfaces and deliverables are clearly defined while maintaining overall architectural integrity, • Provide forward-looking technical direction, ensuring that current project engineering designs consider future project requirements, technology adoption, scalability, obsolescence and opportunities for re-use, • Provide technical leadership, guidance and mentoring to Design Engineers, Engineering Leads and Subject Matter Experts, supporting the development of engineering capability and consistency across the team, • Support the Project Engineering Manager in establishing engineering priorities and technical strategy, providing technical insight into resource requirements, engineering risks, design maturity and areas requiring additional technical capability, • Ideally you will have attained a relevant role related degree, but we are also open to applications of extremely experienced candidates, • Extensive engineering design and architecture experience, ideally within complex, multi-disciplinary technical environments, • Strong systems-thinking capability, with the ability to understand how physical engineering, systems, networks, data centres, communications and infrastructure interact as a complete solution, • Proved experience in developing and governing engineering architectures, reference designs, design standards and technical design principles, • Strong technical decision-making skills, with the confidence to make and defend architectural decisions where there are competing technical or commercial considerations, • Strong design review and technical assurance experience, including the ability to identify design weaknesses, technical risks, integration issues and single points of failure, • Excellent interface management skills, particularly where responsibility crosses engineering teams, departments, suppliers or external engineering partners, • Excellent communication and stakeholder-management skills, with the ability to communicate complex technical concepts clearly to engineers, project teams, senior management, customers and non-technical stakeholders, • Ability to influence without direct line-management authority, working effectively through Engineering Leads, Design Engineers and Subject Matter Experts SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the safety and security in the maritime and marine industry. • Highly Competitive Salary, • Private Healthcare, • Matched pension up to 5% company contribution SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community. #J-18808-Ljbffr

My client is a Leading, Tier 1 Construction Company. They have a fantastic opportunity for a Sub Agent / Site Agent to join their Civil Engineering business working initially on a circa £10m Civils and Rail Project in the Woodstock area of Oxfordshire. In support of the Project Manager, you will be responsible for the successful delivery of the project, and have responsibility to ensure health, safety, environmental & quality compliance as well as programme and budget requirements. You will be closely supported by a dedicated site team and a very experienced Works Manager. Due to the nature of this project, the successful individual will be required to work a mixture of day and night shifts with the latter attracting a sizeable rate uplift. This is a long-term contract opportunity with an estimated duration of 9-12 months. • Experience of civil engineering projects, • Ideally experience of working on rail sector projects, • PTS, CSCS and SMSTS required, • A degree or equivalent in a construction related discipline, • Proven technical and site management abilities in the Built environment, • Strong organisational and management skills, • Knowledge of the requirements and implementation of CDM regulations, • Ability to produce Work Package Plans, Task Briefing Sheets, and implement safe systems of work, • Detailed knowledge of Safety, Quality and Environmental issues relevant to the project environment #J-18808-Ljbffr

North Yorkshire, Sheffield, Bristol or Northampton, home based Calbarrie Compliance Services Ltd provides electrical safety testing and compliance services across the UK, covering fixed installations, portable appliance testing, emergency lighting, thermal imaging and remedial works. Calbarrie works across facilities management, retail, commercial, education and local authority sectors, with a strong focus on repeat business and long-term client relationships. Celnor Group is a UK-based environmental services group operating across the Testing, Inspection, Certification and Compliance (TICC) landscape. With a growing portfolio of specialist businesses, Celnor provides essential services that protect people, property and the environment. While each business retains its own identity, culture and technical specialism, all are supported by a central group function that invests in people, systems and long-term sustainable growth. We are looking for Fixed Wire Test Engineers to join our team, working from a home base in North Yorkshire, Sheffield, Bristol or Northampton and the surrounding areas. The role involves the inspection and testing of commercial fixed wire installations and distribution boards. You will work solely on commercial sites, including facilities management, retail, commercial, education, councils and local authorities. We do not carry out domestic housing work. You will use our bespoke testing software, built with engineer input over a number of years and designed entirely around speed and efficiency of testing. If you have ideas to improve it further, we want to hear them, and feedback is regularly built into future updates. A method statement is agreed with the client before you arrive on site, so expectations are clear from the outset. We focus on larger sites and bigger jobs wherever possible, giving engineers the opportunity to stay on site longer and earn more. Work is organised on a regional basis, so while we try to reduce travel time where we can, we are not able to guarantee work will always be local. You are contracted to 40 hours per week, with overtime opportunities available for those looking to earn more. There may be occasions when out of hours or weekend work is required depending on client access and site type. • Carrying out electrical periodic inspection and testing of fixed wire installations, • Completing minor remedial works where required, • Producing accurate NICEIC reports to be quality checked by our Technical Manager, • Working closely with the Technical Manager and Operations team, • Using our bespoke testing software, designed for speed and efficiency, • Working across facilities management, retail, commercial, education and local authority sites, • Helping identify ways to improve testing software and processes, • A recognised electrical qualification, C&G 2391 or equivalent, preferably as a time served electrician or tester, • AM2 or NVQ Level 3 qualified, • Proven experience testing through and through, on commercial sites rather than domestic housing, • A proven ability to work safely in accordance with company policies and safety legislation, • Dedication to keep up to date with current legislation and undertake training as required You’ll be joining a business that invests heavily in the tools engineers use every day, with bespoke software built and continually improved around speed and efficiency of testing. We focus on larger sites and bigger jobs, giving engineers the opportunity to grow their earnings, and there is genuine scope to progress as the business continues to expand. We offer a competitive salary basic depending on location with £45k-£58k OTE, along with: • Bonus of £2 per circuit for 45+ circuits, rising to £3 per circuit for 58+ circuits, • Overtime paid at £3 per circuit from the 1st circuit for weekend work and hours over 40 per week, • Pension, • 23 days holiday plus bank holidays, including the Christmas shutdown, • Hybrid company car, • Kit and clothing provided This is a great opportunity to join a growing business with genuine earning potential and the tools to do the job efficiently. Calbarrie Compliance Services is committed to providing equal opportunities and values diversity in the workplace. Celnor Group and its businesses manage recruitment directly. We do not require agency support for this role and will only engage with recruitment partners from our preferred supplier list where necessary. We may use technology, including AI-enabled tools, to support parts of the recruitment process. AI is not used for candidate screening, scoring or hiring decisions. All hiring decisions are made by people, for people. Our recruitment systems are ISO 42001 accredited, reflecting our commitment to ethical, transparent and responsible use of technology. #J-18808-Ljbffr

Caterlink is the education sector catering specialist. For over 20 years, the Company has delivered fresh food solutions to pupils and staff at Primary Schools, Secondary Schools and Colleges across the UK. The company caters more than 1,000,000 meals a week. Our “Fresh Food Policy” is the foundation of our success and growth in the market coupled with a desire to truly deliver on the promises we make to our clients and support our site-based teams. We are hiring for a Chef Manager at Cold Aston Primary Schoolwho wants to ensure our future generations are provided with nutritionally balanced and tasty food. This role is working term-time only and no weekends so is great for those looking for flexibility. The role: • £13.65per hour, • 25hours per week working Monday – Friday, • Term-time only – working 52weeks per year Your key responsibilities will include: • To prepare, cook and present food to the standards required by Caterlink and the client, • To ensure that the location meets statutory and company requirements of Health and Safety, Food Safety and environmental legislations and procedures, • To ensure that the company’s reputation for excellent food and service is enhanced with the client and customers and expectations are consistently exceeded, • To be responsible for the day-to-day running of the location and supervising teams including managing inventories, monitoring budgets, and implementing action plans, • To be the main point of contact for our client in your school ensuring that regular adjustments and improvements are both recommended and implemented, • Communicating regularly with your line manager to monitor KPIs and financial targets to ensure these are achieved, • Supporting and training our teams, leading from the front to make sure everyone can excel in their role by ensuring all training is completed and performance is managed Caterlink strives to always provide a diverse, equitable and inclusive environment for all our teams where every individual is treated with respect, integrity and has the opportunity to grow and be treated equally and with fairness at all times. Caterlink is committed to safeguarding and promoting the welfare of children and vulnerable adults and expects all employees to share this commitment. An enhanced DBS disclosure will be obtained for this role. There are many advantages to working for us including: • You have the opportunity of a blended learning programme that can include formal qualifications including apprenticeships, classroom training, eLearning and on the job training to support and encourage your development and enable you to be the best you can be, • We offer you access to our Employee Discount Platform where you can make great savings at supermarkets, cinema, restaurants as well as holiday discounts, family days out and many more!, • You will have full access to our Wellbeing Services including the Employee Assistance Programand Virtual GP benefits which are there for you and your family to use free of charge at any time, • You may be eligible to join our Pensionscheme #J-18808-Ljbffr

Hours:Monday- Friday 7:30am- 17:00pm If you would like to know a bit more about this opportunity, or are considering applying, then please read the following job information. Salary: Competitive Are you looking for an exciting opportunity where your skills and ideas can make a real impact? At Grundon, we are on the lookout for a forward thinking, and driven Transport Manager to join our Ash Tankers team based in Bishops Cleeve. By joining Grundon, your contributions will make a real difference as we work together by showing the world that there is more to waste than it seems. Reporting to the National APCR Transport Manager, you will play a key role in supporting our mission to leave a better planet for future generations. You will be responsible for the safe, efficient, and compliant operation of our Bulk Powder Ash Tanker fleet, while leading and supporting your team and managing your designated areas of responsibility. You will also ensure full compliance with relevant legislation, company policies, and the Goods Vehicle Operator Licence, while effectively managing drivers and resources to deliver a safe, reliable, and high-quality service to our customers. Benefits Pension Scheme Life Assurance Employee Assistance Programme Health Cash Plan Discounted Gym Membership Cycle to Work Scheme Mobile Phone Discounts 30 day's annual leave (inclusive of bank holiday) Holiday Purchase Scheme Refer a Friend Scheme What will you do Lead and support the team, promoting high standards of performance, engagement, accountability and development. Coordinate daily with OCO Technology and EFWs to ensure collections are planned and completed on time. Support recruitment, induction, training, probation and performance management to help employees succeed. Manage driver hours, overtime, expenses, attendance and daily work schedules in line with company policy and legal requirements. Promote a strong safety culture by ensuring accidents, training needs and follow-up actions are managed promptly and effectively. Work closely with Fleet, Workshop and SHEQ teams to maintain safe, compliant and roadworthy vehicles and operations. Maintain high standards of regulatory and FORS compliance, ensuring the operation is always inspection-ready and focused on continuous improvement. About you GCSEs (or equivalent) or relevant operational experience. Transport Manager Certificate of Professional Competence (CPC) is essential. LGV Class 2 (Category C) licence would be beneficial. Experience in waste management or a similar operational environment, including team leadership. Strong communication, customer service, decision-making and problem-solving skills. Proficient in Microsoft Office Packages, with good numerical and analytical skills. Sound knowledge of health and safety, drivers' hours, operator licensing and employment legislation. Strong geographical knowledge, or the ability to develop this quickly. Full UK driving licence About Grundon Grundon is the UK's largest family-owned supplier of integrated waste management and environmental services. We offer a whole host of waste collection, treatment and disposal services, all aimed at helping businesses of all shapes and sizes reduce their environmental impact, maximise resources and find value in their waste. Additionally, at Grundon Sand & Gravel we proudly produce and source high-quality aggregates in a responsible and sustainable way. We take great pride in our heritage and our distinctive approach, which is true to our company values which include: To have integrity To be caring To delivery excellence To maintain curiosity At Grundon, we are dedicated to creating a diverse, equal, and inclusive workplace. xrnqpay We believe great ideas come from everywhere, and we're committed to creating an environment where everyone feels valued, heard, and empowered to thrive. If you're ready to take the next step in your career within waste management, this is your opportunity to join us. #INDSPO

Welder Infrastructure Products Group Eastington, Gloucestershire, United Kingdom Country: United Kingdom City: Req ID: 525154 Job Type : Full Time Workplace Type : Onsite Seniority Level : Associate Hydro International, a CRH Company, is a leading global provider of advanced products, services and expertise to help municipal, industrial and construction customers to improve their water management processes, increase operational performance and reduce environmental impact. With over 40 years of experience and a reputation for engineering excellence, businesses, and public bodies all over the world rely on our products, services and integrated solutions to reduce flood risk, improve water treatment and protect the environment from water pollution. We have a network of over 80 distribution partners and serve customers in more than 40 countries. As part of CRH Infrastructure Products, we are leading the water management industry with innovative, sustainable solutions and a safety-first mindset. Job Title: Welder Reporting to: Production Manager Location: Eastington About the Role We are seeking an experienced Welder to join our Production team. This role plays a key part in the manufacture of high-quality products, utilising welding skills efficiently to support operational performance and business profitability. The successful candidate will work closely with the Production Manager and wider team to deliver safe, accurate, and timely fabrication work. Key Responsibilities Core Welding & Fabrication Interpret and work from engineering drawings, blueprints, and welding specifications. Set up, prepare, and operate TIG welding equipment. Weld and fabricate stainless steel products to a high standard. Assemble metal structures and components in line with design requirements. Inspect welded joints to ensure structural integrity and quality compliance. Quality Control & Compliance Ensure all work meets relevant welding codes, safety standards, and company quality requirements. Identify defects and carry out repairs or adjustments as required. Maintain accurate records of work completed, materials used, and inspections. Equipment & Workspace Management Set up welding machines correctly for the task at hand. Maintain welding tools and equipment, reporting faults when necessary. Keep work areas clean, organised, and compliant with health and safety standards. Health, Safety & Environmental Follow all site safety procedures and wear appropriate PPE at all times. Safely handle gases, materials, tools, and hazardous substances. Participate in safety briefings, toolbox talks, and risk assessments. Report unsafe conditions, incidents, or near misses immediately. Collaboration & Continuous Improvement Work collaboratively with fabricators, engineers, and supervisors to meet project deadlines. Communicate progress, issues, or material needs clearly and promptly. Support training and mentoring of less experienced colleagues where required. Contribute to continuous improvement initiatives and process enhancements. Skills, Experience & Qualifications Essential Relevant welding qualification (e.g. City & Guilds or NVQ Level 2 or 3 in Welding & Fabrication, or equivalent). Valid welding codings where required (e.g. BS EN ISO 9606). Proven experience in a workshop or site-based welding environment. Strong TIG welding capability. Ability to read and interpret engineering drawings and welding symbols. Good understanding of fabrication techniques and inspection methods. Desirable First Aid certification. Knowledge of NDT and weld testing processes. Personal Attributes & Behaviours Strong attention to detail and commitment to high-quality workmanship. Excellent time management and organisational skills. Ability to work independently with minimal supervision. Clear and professional communication style. Mechanical aptitude and practical problem-solving ability. Strong safety awareness and compliance mindset. Adaptable and able to work in varying environments and conditions. Reliable, punctual, and deadline-focused team player. Physical & General Requirements Full UK driving licence. Ability to undertake manual handling tasks. Willingness to travel reasonably for work purposes. Why work for us? Competitive Salary Annual Discretionary Bonus 2 x Annual salary Life Cover Pension Company Sick pay benefit 25 days holiday per annum + Bank Holidays Flu Vaccines DSE Eye Tests Mental Health First Aiders & Support programmes Training & Development What Hydro International Offers You A culture that values opportunity for growth, development, and internal promotion Highly competitive salary package Comprehensive secondary benefits Significant contribution to your pension plan Excellent opportunities to develop and progress with a global organization Connect your future to CRH We are curious to learn more about you. At CRH, we believe our mutual differences contribute to the healthy, productive, and enjoyable workspace we create. Please introduce yourself and send us your application. TPBN1_UKTJ

For information on how we may use, process, store and disclose your personal information, please refer to Detail2Recruitment website policy. Detail2 Recruitment is working with a leading waste management and environmental services business. Fleet Transport Manager - The Details.

Poolhall Recruitment Ltd is seeking an experienced Health & Safety Manager to support construction projects across the UK. This role ensures compliance with health and safety legislation, maintains site standards, and provides practical H&S support to project teams on site. You will lead inspections, review RAMS, deliver toolbox talks, investigate incidents, and drive health, safety and environmental initiatives across multiple sites with nationwide travel. #J-18808-Ljbffr

Internal Sales Executive – Waste Management Location: Cheltenham Working: Office-based Salary:£28,500 – £30,000k Commission: Uncapped Type: Full-time, Permanent The Opportunity We are working with a successful family-owned waste management business with around 95 employees, a fleet of 50 vehicles and its own mixed recycling and confidential shredding facilities in Cheltenham. They are looking for a Telesales Executive to join their growing sales team and generate new business across the region. This is a proactive outbound sales role, where you'll be responsible for identifying prospective customers, building relationships and converting opportunities into new business. The Role You'll be responsible for: • Making outbound calls to prospective business customers, • Generating and qualifying new sales opportunities, • Identifying customer requirements and recommending suitable solutions, • Building relationships with decision-makers, • Following up leads and maintaining your pipeline, • Preparing quotes and closing new business, • Working towards monthly new-business targets, • Keeping accurate records of activity and opportunities You'll be selling a broad Total Waste Management (TWM) proposition, including general and food waste, recycling, confidential shredding and other commercial waste services. About You We're looking for someone who enjoys outbound sales and winning new business. Waste experience is not essential. We're open to people from any relevant B2B service-led sales environment, including: • Waste / Recycling, • Facilities Management, • Security, • Cleaning / Hygiene, • Environmental Services, • Logistics, • Telecoms, • Business Services, • Managed Services Relevant backgrounds could include Telesales Executive, Sales Executive, Business Development Executive, Internal Sales Executive, Sales Consultant or Account Manager with a strong new-business focus. You'll need to be confident on the phone, commercially driven, resilient and comfortable picking up the phone and creating opportunities from scratch. The Package • Uncapped commission, • Office-based role in Cheltenham, • Established family-owned business, • Full training and support, • Broad range of services to sell, • Opportunity to progress within the business JBRP1_UKTJ

As a Test Systems Technical Lead, you will be responsible for the technical direction, definition, and delivery of test system solutions across Power Distribution and Controls programs. You will own the technical solution for your product/project area, ensuring that test systems meet Safety, Quality, customer, regulatory, and business requirements while supporting program Delivery and Cost objectives. Working as part of an Integrated Product Development Team (IPDT), you will lead the full test systems lifecycle from initial requirements capture through design, implementation, verification, release, and in-service support. You will demonstrate strong technical leadership, collaborate closely with Program and Engineering Project Managers, and provide guidance, coaching, and mentoring to engineers in the test systems team. • Test Systems Lifecycle Ownership Own the technical solution for test systems in your product/project area, ensuring alignment to customer, regulatory, and internal requirements. Lead the full Test Systems life cycle from concept and requirements definition through design, implementation, verification, formal release, and in-service support. Execute requirements, design, implementation, and verification using sound engineering principles, adhering to business standards, procedures, and program requirements. Ensure test equipment solutions are suitable for qualification, EMC, system verification, and production support, in line with DO-160, MIL-STD-461 and similar standards. • Technical Leadership Own the technical direction and accountability for test systems within your project to meet customer and derived requirements. Monitor and steer the technical solution, ensuring rigor in design and technical reviews for your test solution. Collaborate with the Designated Technical Authority (DTA) to ensure test system architectures and strategies are aligned to the overall product architecture. Engage SMEs and Chief Engineer’s Office as needed to resolve complex technical issues, de-risk solutions, and ensure compliance with internal design guidelines. Ensure adherence to project plans, company and industry standards, and appropriate application of DTC (Design to Cost) and DFM (Design for Manufacture) / DFT (Design for Test) principles for test solutions. • Budget / Schedule / Scope Support Support the Control Account Manager (CAM) and EPM in delivering the technical solution to the agreed scope, schedule, and budget for your project. Protect against internal and external scope creep for the test system, identifying potential changes early and supporting mitigation. Clearly communicate technical expectations to the engineering team, including definition of done, entry/exit criteria, and required deliverables. Support work package planning (e.g., rolling wave planning, milestones, and estimates) and provide input to technical metrics to monitor progress and health of test activities. Provide timely technical inputs to program reviews, Toll Gates, forecast updates, and risk & opportunity reviews as requested by EPM/PM. • Cross-functional Collaboration and Customer Interface Act as the engineering interface to Program Management on test systems topics, clearly articulating technical direction, risks, and decisions. Liaise and interface with Systems, Hardware, Software, Manufacturing, Sustaining, Quality, Supply Chain, and Lab Operations to ensure integrated and robust test solutions. Support Program Manager and EPM in customer and certification discussions related to test system capability, coverage, readiness, and evidence. Ensure alignment and coordination with Manufacturing Program Manager (Launch Leader) and production test stakeholders regarding test strategy, manufacturability, and transition to production test environments. • Governance, Documentation, and Compliance Assure proper documentation of technical data generated for test systems in line with engineering policies, configuration control, and quality requirements. Ensure test system requirements, design artefacts, verification evidence, and configuration baselines are defined, maintained, and traceable. Participate as presenter or reviewer in technical, design, and program reviews (including CEO/DTA reviews where applicable), ensuring issues, risks, and lessons learned are captured and addressed. Support change management activities for test systems, providing technical impact assessments for scope/schedule changes and feeding into program BCRs as required. • People Leadership, Coaching and Behaviours Provide technical guidance and leadership to engineers and technicians working on test systems, ensuring clarity of priorities, deliverables, and standards. Coach, mentor, and train less experienced engineers, actively building technical capability and succession in the test systems community. Model and reinforce GE Leadership Behaviours - Act with Humility, Lead with Transparency, Deliver with Focus – and the supporting core values of Leading, Influencing, and Collaborating. Demonstrate and promote key team behaviours, including risk identification and mitigation, proactive information sharing, collaborative decision making, constructive feedback, problem solving, and driving Lean and cost out. Provide timely communications on significant technical issues or developments and use the defined escalation paths (Tech Lead/CAM → EPM → Subsection Manager/PMO → PM → senior leadership) where resolution is blocked or risks escalated. Degree in Electrical, Electronic, or Software Engineering, or equivalent knowledge and experience. Significant experience in test system design, development, and integration, including hardware/software integration for complex systems, ideally in aviation or other high integrity/safety-critical environments. Demonstrated experience in qualification and EMC test equipment design, with working knowledge/awareness of DO-160, MIL-STD-461 or equivalent environmental and EMC standards. Proven technical leadership experience delivering solutions to agreed scope, schedule, cost, and quality, preferably as a Technical Lead, CAM, or equivalent within a project environment. Strong problem-solving and solution-building skills, with the ability to break down complex problems, identify options, and drive to resolution. Excellent communication skills, able to clearly convey complex technical topics to engineering teams, program management, customers, and leadership. Evidence of independent and sound technical judgement, including identifying when to upscale and when to seek DTA/CEO guidance. Demonstrable success in achieving and exceeding customer and program milestones for test system or product deliveries. Proven ability to deliver solutions on time, within budget, and to the required quality, operating effectively across TG3 - TG9 project phases. Positive attitude, initiative, and proactiveness, with enthusiasm for continuous improvement, Lean thinking, and cost-out in test solutions. Experience mentoring and developing engineers, including delegating technical work, providing feedback, and supporting career development. Experience with aircraft power distribution systems verification laboratories or similar system integration/verification environments. Ability to gather support from multiple stakeholders and influence cross-functional teams, leveraging strong product and architecture understanding. Demonstrated collaboration across global, multi-function teams, creating environments where customer‑centric creativity and outside‑in thinking are encouraged. • Lead complex, cross-functional technical workstreams within programs, often spanning multiple products or platforms., • Serve as the primary technical escalation point for test systems in their area, while using defined escalation paths for unresolved issues., • Set high standards for safety, quality, and compliance, and actively drive continuous improvement in test strategies, methods, and tools., • Act with humility, lead with transparency, and deliver with focus, always with unyielding integrity. GE Aerospace supports and encourages flexible working arrangements, where possible, and recognises the benefits to employees of having a positive work-life balance. At GE Aerospace we understand the importance of Total Reward. Our flexible benefits plan, called FlexChoice, gives you freedom, choice and flexibility in the way you receive your benefits, as well as giving you the opportunity to make savings where possible. As a new joiner to GE Aerospace we are pleased to be able to offer you the following as default in your benefit fund, which you then can tailor to meet your individual needs; • Non-contributory Pension, • Life Assurance, • Group income protection, • Private medical cover, • Holiday Hourly equivalent of 26 days, with flexible option to buy or sell Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that BPSS clearance cannot be obtained, you may not be eligible for the role and/or any offer of employment may be withdrawn on grounds of national security. Please see the link below for further details regarding the requirements for BPSS clearance: BPSS Applications from job seekers who require sponsorship to work in the UK are welcome and will be considered alongside all other applications. However, under the applicable UK immigration rules as may be in place from time to time, it may be that candidates who do not currently have the right to work in the UK may not be appointed to a post if a suitably qualified, experienced and skilled candidate who does not require sponsorship is available to take up the post. For further information please visit the UK Visas and Immigration website. Relocation Assistance Provided: No #J-18808-Ljbffr

Joining Warrens as a Regional Compliance Manager you will be responsible for implementing, administering and enforcing all Health and Safety, Environmental policies, processes and standards required for the depot to operate in accordance with both the laws that govern depot compliance and quality standards. Key Duties • Ensure that all requirements of the Health, Safety & Environment policies and standards are met by the depot through influencing and supporting the depot management team., • Briefing depot teams on updated or new ways of working, standards, how to guides, risk assessments, safe systems of work and QHSE alerts., • Ensure fire safety standards, tests, drills are adhered to, including equipment and emergency lighting and Fire Risk Assessment Report actions are completed., • Accountable for completing internal (first party) audits at the depot to support assurance, audits and risk objectives., • With the support of the appropriate central departments provide guidance to the depot management team to comply with internal and external audits and close out requirements after audit. Works to ensure depot compliance to audit standards through induction training, ongoing development and refresher training as required., • Monitor standards & audit requirements to ensure compliance, as well as highlight areas of non-compliance to senior depot management and demonstrate a proactive problem solving approach to resolve any areas of non-compliance (BS 18001, ISO 14001, BRC)., • With the support of the appropriate central departments provide advice and guidance on all aspects of site Health, Safety & Environment Standards., • Deliver and co-ordinate all Health, Safety & Environment Standards and compliance related events/induction to update management team and new employees., • Work with the depot management team to identify and review compliance key performance indicators and suggest improvements and efficiencies to better meet business/legal requirements., • Maintain training records and trainings for MHE, • Support and Co-ordinator BRC Auditing, following up BRC non conformance., • Responsible for ensuring the food Safety & Quality Assurance procedures are complied with when performing inspections., • Support the sites to ensure the attainment of BRC, • Support with document control, corrective and preventative action and trend analysis., • Work with site representatives to manage quality Management and Operating Procedures including all Hygiene Operations, allergen management and pest control. Job requirements A sound working knowledge of company processes and standards within the business and demonstration of practical application. • Strong knowledge in Health & Safety, Environmental management, Internal and external auditing, • Effective communicator with the ability to persuade and influence senior management., • Flexible, enthusiastic and positive approach., • Able to cope under pressure and prioritise demands., • Ability to deliver effective presentations and training courses., • Customer driven, collaborative and hands-on approach able to identify pragmatic, business-focused solutions to areas of non-compliance., • Ability to work independently on own initiative., • Ability to interpret and apply safety legislation and policy., • Ability to analyse customer needs and make recommendations based on sound business knowledge and commercial acumen, • Experience of a fast-moving distribution environment., • IT literate - Microsoft Office applications., • Cost management and ability to work within tight budgetary controls JBRP1_UKTJ

Working within the Sourcing & Planning function as a Brands & Licensing Sourcing Manager, you will be a key stakeholder in bringing newly licensed brands into our portfolio, acting as the sourcing lead from initial onboarding through to first production. You will hold responsibility for procuring packaging and trim components across our global range, with licensing adding an extra layer of complexity given the detailed, brand-specific guidelines each new partner brings. • Brands & Licensing:, • Lead the onboarding of newly licensed brands, acting as the key point of contact within the Sourcing function from initial supplier and factory assessment through to first production, • Assess whether we have the right supply base to support each new brand, including supplier capability, capacity and allocation across categories and regions, • Take responsibility for cost price negotiations on licensed brand product, securing cost efficiencies through effective negotiation and by accurately analysing benchmark and open costings with existing and potential suppliers, to achieve target margin, • Partner with Retail Merchandising and Demand Planning on delivery phasing and planning for licensed brands, • Set up and own the trading business critical path for each brand, engaging cross-functional teams to ensure alignment to key dates, • Work with Retail Merchandising on stock positioning, identifying the most suitable stores and locations to stock each brand's product, • Work closely with our Commercial Director, supporting the wider brand and licensing strategy as new deals are agreed, • Packaging & Trims:, • Collaborate with design and suppliers on ways to reduce lead times, such as reviewing available fabrics & trims, • Take ownership for ensuring cost efficiencies for trims have been secured through effective negotiation with suppliers, leveraging scale and accurately analysing benchmark costings with existing and potential suppliers, • Share forecasts with label & packaging suppliers on a seasonal basis, • Monitor label production throughout the season, ensuring lead times are adhered to and addressing any capacity concerns that could impact bulk production delivery timelines, • Manage the label supplier rebate process, ensuring accurate invoices are raised and paid in a timely manner, • Educated to degree level or equivalent, • A highly experienced Sourcing Manager or Senior Manager with a strong background in the fashion industry, and extensive knowledge of product sourcing, • Equipped with advanced knowledge of product construction, the critical path, costing, manufacturing and calendar management, • Knowledgeable about trends in market conditions, pricing and future markets, • A strong negotiator with the ability to find pragmatic solutions that work for all parties, comfortable operating at an extremely high level of price negotiation, • Able to think through the details and contingencies of plans and make sound business decisions, comfortable operating with ambiguity given the developing nature of our licensing model, • A strong written and verbal communicator with the ability to influence and establish credible relationships with suppliers, brand and licensing partners, and senior stakeholders including our Commercial Director, • An excellent organiser, with project management and planning skills as well as the proven ability to prioritise multiple projects while maintaining attention to detail and accurate work in a fast paced and changing environment, • Self-motivated with a positive attitude, able to work at pace to deliver to agreed timelines, • Equipped with good computer skills including proficiency in Microsoft Excel, PowerPoint & Word, • Experience of working with licensed brands or a multi-brand portfolio is advantageous, though not essential, • Based within easy commuting distance of Cheltenham, or willing to relocate, • 25 days annual leave, plus bank holidays, we also offer a holiday buying scheme, • An additional day off to celebrate your Birthday, • Family is massively important to us, so we have a broad range of family-friendly working policies in place, including enhanced maternity, paternity, and adoption leave, • Company Pension scheme, • All employees are covered by our Life Assurance policy whilst working at Superdry. We feel it’s important to offer protection for your family and loved ones in such a situation and to support this we offer life assurance cover which pays a lump sum equivalent either twice or four times your annual salary, • A big staff discount - naturally. Because we know that you love to wear Superdry, you'll benefit from a 50% discount in store and online, • Our Head Office is home to our very own store for staff only where you can treat yourself to heavily discounted sample stock, • A health cash plan is open to all employees., • Flexible working and core working hours between 10am - 4pm to help you achieve that all-important work-life balance, • Access to onsite parking and as part of our sustainable development goals, we have a selection of electrical car parking points freely available to staff., • A range of learning and development materials to help you in your career and grow with us, • We like to give back, so we allow our employees time off for volunteering work, • A global employee assistance plan in place that you can access anytime you want - it's free and confidential, • You'll also have access to a Cycle To Work Scheme, • A range of local discounts with businesses across Gloucestershire At Superdry, everyone has a voice and we want to hear it. We create environments where individuality can flourish and is celebrated as part of who we are as a brand. We're incredibly proud that over 90% of our people feel strongly that they can be themselves at work. We want to meet people with varied backgrounds because we understand that diversity of thought encourages new ideas to thrive, fuelling creativity and enabling us to do better work. We want to build a team which represents a variety of backgrounds, styles, perspectives, and skills; we hire people based on their merit and potential. We also welcome conversations about flexible working for all roles at Superdry and will always accommodate it where possible. Please note that some jobs may be closed earlier than the published closing date if we get a high volume of applications. We therefore advise that you complete your application at your earliest opportunity to avoid disappointment. Superdry have been making world-class product for over 20 years, and we're proud of it. Our mission is to inspire and engage the contemporary style-obsessed consumer, whilst leaving a positive environmental legacy. Together with our CEO, we have built a brand that has cut through the global apparel market at record speed, taking market share from brands that have existed for decades. Our brand direction has never been stronger, evolving American Prep to resonate with a new generation of customers. We are now on an exciting journey having reset our brand returning to our design-led roots and we are looking for talented people to join us. #J-18808-Ljbffr

Job Description Rendesco is the UK's leading heat pump and heat network business. We design, build, fund, own and operate low-carbon heating systems that help homes and communities move away from gas. We're growing quickly, and technology is central to how we operate. We're now looking for a recent graduate to join our team and help us make the most of our technology while keeping our systems, data and people secure. Location: Nationwide travel for client visits and meetings as required, occasional visits to the London office, and remote working. Job Requirements You're a confident relationship builder and natural deal-closer who enjoys working in a fast-moving, growth-focused environment. • Proven experience selling into the new build housing market, • Strong B2B sales track record with a results-driven mindset, • Excellent communication, negotiation, and stakeholder management skills, • Ability to manage complex sales cycles from lead generation through to close, • Confident presenter with strong proposal and tender writing skills, • Comfortable using CRM systems to manage pipeline and performance, • Experience in the heat network and/or heat pump industry, • Knowledge of new build procurement processes and tender frameworks, • Ability to analyse sales and market data to drive commercial decisions, • Experience using Salesforce Job Responsibilities We're looking for a driven and commercially minded Business Development Manager to help accelerate Rendesco's growth across the UK. Reporting to the Head of New Build Sales, you'll be responsible for identifying new opportunities, building strong client relationships, and closing high-value deals in the fast-growing low-carbon heating sector. This is an exciting opportunity for someone who thrives in a strategic, target-driven role and wants to be part of a business delivering real environmental impact. Job Benefits • A competitive annual salary., • Industry-leading commission structure with unlimited earning potential., • Private Medical Insurance after successful completion of probation., • Electric Vehicle and Cycle to Work Salary Sacrifice Schemes., • £30 monthly phone allowance., • Enhanced mileage reimbursement for business travel., • Training, development and progression opportunities., • A collaborative and inclusive working environment with the flexibility of remote working and access to our offices. Be the change. At Rendesco, we're committed to creating an inclusive workplace. As a Disability Confident and equal opportunities employer, we welcome applications from all backgrounds. #J-18808-Ljbffr

My client is a Leading, Tier 1 Construction Company. They have a fantastic opportunity for a Sub Agent / Site Agent to join their Civil Engineering business working initially on a circa £10m Civils and Rail Project in the Bourton-On-The-Water area. In support of the Project Manager, you will be responsible for the successful delivery of the project, and have responsibility to ensure health, safety, environmental & quality compliance as well as programme and budget requirements. You will be closely supported by a dedicated site team and a very experienced Works Manager. Due to the nature of this project, the successful individual will be required to work a mixture of day and night shifts with the latter attracting a sizeable rate uplift. This is a long-term contract opportunity with an estimated duration of 9-12 months. • Experience of civil engineering projects, • Ideally experience of working on rail sector projects, • PTS, CSCS and SMSTS required, • A degree or equivalent in a construction related discipline, • Proven technical and site management abilities in the Built environment, • Strong organisational and management skills, • Knowledge of the requirements and implementation of CDM regulations, • Ability to produce Work Package Plans, Task Briefing Sheets, and implement safe systems of work, • Detailed knowledge of Safety, Quality and Environmental issues relevant to the project environment #J-18808-Ljbffr

Product Safety Engineer - 4 roles avalable. £74.68 per hour (Inside IR35) 12 month contract Mostly remote - 2-3 days per month (Flexible) on site, LA14, possibly other sites. Our client is at the forefront of technology, innovation and national security. Bringing together talented people, cutting-edge digital capabilities and a shared purpose: to protect what matters most in an increasingly connected world. Looking for passionate, curious and forward-thinking individuals to join our team and help solve some of the most complex challenges facing our customers. Whether you're an experienced professional or looking to take the next step in your career, you'll have the opportunity to work on meaningful projects, develop your skills and make a real impact. The Principal Engineer - Product Safety shall provide support to the Engineering Delivery Manager in the development, delivery and maintenance of the Project Product Safety Management System and Product Safety Case to ensure Products are safe to own and legal to operate. Typical duties include : • Technical, • The Principal Engineer (Product Safety) shall:, • Derive and manage Product Safety requirements., • Develop, implement and maintain the Safety Management System., • Produce and manage Project Safety Management Plans., • Lead Product Safety hazard and risk identification, management and assessment activities., • Provide Product Safety engineering advice to the wider BAE Systems community., • Oversee the administration and management of the Project Hazard Log., • Influence the construction and delivery of the Project Safety Case including Safety Case reports., • Support the production of training material to support training delivery., • Deliver training to the Product Safety and Environmental domains and the wider BAE Systems community., • Lead engagement with internal and external customers, ensuring that their requirements are fully considered and adequately supported where appropriate and agreed., • Produce, present and articulate clear and logical technical safety arguments., • Complete peer reviews, checking, verification and assurance tasks to demonstrate the adequacy and robustness of the Safety Case and supporting documentation., • Oversee and peer review junior rules in the Product Safety team., • Understand the application of wider Safety Case, Quality and HSandE Management System documentation., • Support the appropriate meetings and Working Groups., • Admin, • Chair hazard identification meetings., • Support the development of realistic programme status updates, identify problem areas and implement agreed recovery plans., • Lead appropriate meetings and Working Groups JBRP1_UKTJ

Working within the Sourcing & Planning function as a Brands & Licensing Sourcing Manager, you will be a key stakeholder in bringing newly licensed brands into our portfolio, acting as the sourcing lead from initial onboarding through to first production. You will hold responsibility for procuring packaging and trim components across our global range, with licensing adding an extra layer of complexity given the detailed, brand-specific guidelines each new partner brings. • Brands & Licensing:, • Lead the onboarding of newly licensed brands, acting as the key point of contact within the Sourcing function from initial supplier and factory assessment through to first production, • Assess whether we have the right supply base to support each new brand, including supplier capability, capacity and allocation across categories and regions, • Take responsibility for cost price negotiations on licensed brand product, securing cost efficiencies through effective negotiation and by accurately analysing benchmark and open costings with existing and potential suppliers, to achieve target margin, • Partner with Retail Merchandising and Demand Planning on delivery phasing and planning for licensed brands, • Set up and own the trading business critical path for each brand, engaging cross-functional teams to ensure alignment to key dates, • Work with Retail Merchandising on stock positioning, identifying the most suitable stores and locations to stock each brand's product, • Work closely with our Commercial Director, supporting the wider brand and licensing strategy as new deals are agreed, • Packaging & Trims:, • Collaborate with design and suppliers on ways to reduce lead times, such as reviewing available fabrics & trims, • Take ownership for ensuring cost efficiencies for trims have been secured through effective negotiation with suppliers, leveraging scale and accurately analysing benchmark costings with existing and potential suppliers, • Share forecasts with label & packaging suppliers on a seasonal basis, • Monitor label production throughout the season, ensuring lead times are adhered to and addressing any capacity concerns that could impact bulk production delivery timelines, • Manage the label supplier rebate process, ensuring accurate invoices are raised and paid in a timely manner, • Educated to degree level or equivalent, • A highly experienced Sourcing Manager or Senior Manager with a strong background in the fashion industry, and extensive knowledge of product sourcing, • Equipped with advanced knowledge of product construction, the critical path, costing, manufacturing and calendar management, • Knowledgeable about trends in market conditions, pricing and future markets, • A strong negotiator with the ability to find pragmatic solutions that work for all parties, comfortable operating at an extremely high level of price negotiation, • Able to think through the details and contingencies of plans and make sound business decisions, comfortable operating with ambiguity given the developing nature of our licensing model, • A strong written and verbal communicator with the ability to influence and establish credible relationships with suppliers, brand and licensing partners, and senior stakeholders including our Commercial Director, • An excellent organiser, with project management and planning skills as well as the proven ability to prioritise multiple projects while maintaining attention to detail and accurate work in a fast paced and changing environment, • Self-motivated with a positive attitude, able to work at pace to deliver to agreed timelines, • Equipped with good computer skills including proficiency in Microsoft Excel, PowerPoint & Word, • Experience of working with licensed brands or a multi-brand portfolio is advantageous, though not essential, • Based within easy commuting distance of Cheltenham, or willing to relocate, • 25 days annual leave, plus bank holidays, we also offer a holiday buying scheme, • An additional day off to celebrate your Birthday, • Family is massively important to us, so we have a broad range of family-friendly working policies in place, including enhanced maternity, paternity, and adoption leave, • Company Pension scheme, • All employees are covered by our Life Assurance policy whilst working at Superdry. We feel it’s important to offer protection for your family and loved ones in such a situation and to support this we offer life assurance cover which pays a lump sum equivalent either twice or four times your annual salary, • A big staff discount – naturally. Because we know that you love to wear Superdry, you’ll benefit from a 50% discount in store and online, • Our Head Office is home to our very own store for staff only where you can treat yourself to heavily discounted sample stock, • A health cash plan is open to all employees., • Flexible working and core working hours between 10am – 4pm to help you achieve that all-important work-life balance, • Access to onsite parking and as part of our sustainable development goals, we have a selection of electrical car parking points freely available to staff., • A range of learning and development materials to help you in your career and grow with us, • We like to give back, so we allow our employees time off for volunteering work, • A global employee assistance plan in place that you can access anytime you want - it’s free and confidential, • You’ll also have access to a Cycle To Work Scheme, • A range of local discounts with businesses across Gloucestershire At Superdry, everyone has a voice and we want to hear it. We create environments where individuality can flourish and is celebrated as part of who we are as a brand. We’re incredibly proud that over 90% of our people feel strongly that they can be themselves at work. We want to meet people with varied backgrounds because we understand that diversity of thought encourages new ideas to thrive, fuelling creativity and enabling us to do better work. We want to build a team which represents a variety of backgrounds, styles, perspectives, and skills; we hire people based on their merit and potential. We also welcome conversations about flexible working for all roles at Superdry and will always accommodate it where possible. Please note that some jobs may be closed earlier than the published closing date if we get a high volume of applications. We therefore advise that you complete your application at your earliest opportunity to avoid disappointment. Superdry have been making world-class product for over 20 years, and we’re proud of it. Our mission is to inspire and engage the contemporary style-obsessed consumer, whilst leaving a positive environmental legacy. Together with our CEO, we have built a brand that has cut through the global apparel market at record speed, taking market share from brands that have existed for decades. Our brand direction has never been stronger, evolving American Prep to resonate with a new generation of customers. We are now on an exciting journey having reset our brand returning to our design-led roots and we are looking for talented people to join us. #J-18808-Ljbffr

Are you an experienced Project Manager with an engineering or technical background? Do you have experience managing installation projects from initial planning through to completion, keeping a close eye on budgets, timescales, resources and customer expectations? We're working with a growing engineering business in Havant who are looking for a Project Manager to join their team, managing a variety of installation projects across the UK. Paying £40,000–£50,000 depending on experience, this is a great opportunity to join an ambitious business where you'll have genuine ownership of your projects and the opportunity to make an impact. What's the role all about? You'll take responsibility for engineering installation projects from start to finish – making sure they're properly planned, resourced and delivered on time, within budget and to the right quality standards. You'll be the link between the customer and the internal Design and Installation teams, making sure everyone has the information, resources and timescales they need to keep projects moving. You'll also manage suppliers and subcontractors, monitor costs, oversee Health & Safety and make sure the customer receives a great service throughout the project. It's a varied role, so you'll need to be comfortable managing multiple projects at the same time and adapting when priorities change. What will you be doing? • Managing engineering installation projects from initial planning through to completion, • Creating and maintaining detailed project plans, schedules and deliverables, • Managing multiple projects simultaneously, • Monitoring project budgets and ensuring costs remain controlled, • Planning labour, travel, equipment and materials efficiently, • Coordinating internal engineering, design and installation resources, • Managing suppliers and subcontractors, • Building strong relationships with customers and acting as a key point of contact, • Identifying project risks early and putting appropriate actions in place, • Ensuring technical information is available when required, • Working with Design and Installation teams to interpret drawings and specifications, • Coordinating project documentation including As-Built Drawings and O&M Manuals, • Supporting the preparation of RAMS, • Managing Health, Safety and Environmental requirements across your projects, • Ensuring work is delivered in line with contract specifications, agreed timescales and quality requirements, • Driving projects through to successful handover and closure What do you need? We're looking for someone with: • Previous experience in Project Management, • An engineering, technical or supervisory background, • Experience managing engineering, construction or installation projects, • Strong commercial awareness with experience managing project budgets, • Experience coordinating internal teams, suppliers and subcontractors, • Excellent customer and stakeholder management skills, • Strong planning and organisational skills, • Confidence managing several projects and priorities at once, • An industry-recognised Project Management qualification, • Full UK driving licence, • Flexibility to travel to customer and project sites when required Experience within critical power, generators, electrical installations, M&E, engineering services or a similar technical environment would be particularly relevant. About you You'll be someone who enjoys taking ownership and getting things done. You won't be afraid to roll your sleeves up when a project needs additional support, and you'll be confident making decisions and solving problems when things don't quite go to plan. You'll be: • Proactive and solutions-focused, • Customer-focused, • Commercially aware, • Highly organised, • Comfortable working under pressure, • A strong communicator, • Adaptable when priorities change, • Safety-conscious, • Someone who takes pride in delivering a high-quality service The details Role: Project Manager – Engineering Installations Location: Havant Salary: £40,000–£50,000 DOE Contract: Permanent Travel: UK travel required Interested? If you're an experienced Project Manager, Engineering Project Manager, Installation Project Manager or Technical Project Manager looking for your next opportunity, we'd love to hear from you. Apply today or contact Kingdom People for a confidential discussion. Kingdom People are acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

Company DescriptionWork with Us. Change the World.At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.We're one global team driven by our common purpose to deliver a better world. Join us.Job DescriptionShape the Future of Digital Rail DeliveryWe're looking for an experienced and motivated Senior BIM Manager to lead BIM excellence across major rail infrastructure projects.This is an opportunity to play a key role in delivering complex multidisciplinary schemes, driving innovation, improving digital delivery performance, and helping shape the future of rail infrastructure through BIM, Digital Engineering, and integrated project delivery.Whether you're an established Senior BIM Manager, Digital Delivery Lead, or a technically strong BIM professional ready for your next step, we'd like to hear from you.Here's what you'll do: Lead BIM and Digital Delivery across major rail projects.Develop and implement BIM standards, workflows, and best practices.Lead model coordination, federation, design integration, and digital collaboration.Oversee project BIM governance, including BEPs, Information Requirements, Delivery Plans, and compliance with BS EN ISO 19650.Drive the effective use of Common Data Environments, including ProjectWise and Autodesk Construction Cloud.Support integration of BIM, GIS, asset information, and emerging digital technologies.Mentor BIM professionals and help develop digital capability across the business.Work closely with clients, project teams, and supply chain partners to deliver high-quality digital outcomes.Contribute to bids, innovation initiatives, and business growth.Why Join Us?Work on nationally significant rail infrastructure projects.Flexible and hybrid working support.Clear career progression and leadership opportunities.Access to industry-leading technology and training.A collaborative and inclusive culture that values diverse perspectives.The opportunity to help shape our BIM and Digital Delivery future.We welcome applications from candidates who may not meet every requirement but can demonstrate relevant experience, transferable skills, and a passion for digital delivery.QualificationsJoin us and help transform the future of rail through BIM, Digital Engineering, and innovation.Ready to push the limits of what’s possible?What We're Looking ForExperience leading BIM and Digital Delivery within rail, transportation, or infrastructure projects.Strong understanding of BIM implementation, model coordination, digital workflows, and CDEs.Working knowledge of BS EN ISO 19650 and industry best practice.Experience using tools such as OpenBuildings, OpenRail, MicroStation, Revit, Navisworks, ProjectWise, and Autodesk Construction Cloud.Excellent communication, stakeholder engagement, and leadership skills.A passion for innovation, collaboration, and continuous improvement.Come grow with us.Additional InformationInterested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more!At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.About AECOMAECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $16.1 billion in fiscal year 2025. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM.Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed.You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients.AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too.Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours.We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address ReasonableAccommodationsUKI@aecom.com if you would like to apply through the Disability Confident Interview Scheme.All your information will be kept confidential according to EEO guidelines.SummaryType: Full-timeFunction: Information TechnologyExperience level: Mid-Senior LevelIndustry: Construction

Caval Limited in Oxenton near Cheltenham is seeking a Site Manager for a six-month civil project. You will lead daily site operations, coordinate subcontractors and trades, and ensure works are delivered safely, on time and to programme. A strong civils background with water network experience is preferred; SMSTS and CSCS are required. You will maintain RAMS, permits and site documentation while upholding health, safety, and environmental standards. #J-18808-Ljbffr

Job Title: Site Manager - Civil Engineering Location: Oxenton just outside Cheltenham Day Rate: 350pd CIS or Limited Company • 6 month contract, • Immediate start available, • Full civils package including drainage, ducting, roads, footways, 4m diameter chambers, deep excavations and more, • Opportunity to work on the water/sewerage network, • Strong civil engineering experience essential; water/STW experience would be ideal We are currently seeking an experienced Site Manager for a 6-month project in Oxenton, just outside Cheltenham. The successful candidate will have a strong background in civil engineering, ideally combined with experience in water and sewage treatment works. You will be responsible for managing day-to-day site activities, coordinating subcontractors and ensuring works are delivered safely, efficiently and to programme. • Proven experience as a Site Manager or Site Supervisor, • Strong civils/construction background, • Water network expeirence, • Experience coordinating subcontractors and multiple trades, • Good understanding of site health & safety requirements, • SMSTS and CSCS, • Manage daily site operations and site teams, • Manage subcontractors and site operativesMonitor programme, progress and quality, • Ensure RAMS, permits and site documentation are maintained, • Maintain high standards of health, safety and environmental compliance, • Coordinate with the Project Manager, engineers and client representatives, • Ensure works are completed in accordance with project specifications and relevant standards #J-18808-Ljbffr

Insights Manager - Jockey Club Experiences, London, Liverpool or Birmingham | Full-Time / Permanent Up to £55000 + excellent benefits including healthcare, wellbeing support, 23 days' annual leave plus bank holidays, life assurance, meals on duty, and more. We're looking for... This position will be supporting E15 Insights, part of Levy UK & Ireland, a division of Compass Group. E15 Insights uses data, analytics, and deep insights to drive business strategy, innovation, and decision-making. Across Levy UK&I, E15 Insights creates value through elevating operational delivery, enhancing consumer experiences and optimizing innovation and new investment opportunities. Areas of impact will range across E15 Insights remit in sports stadia and facilities, arenas, theatres, and other venues. The role will be ultimately responsible for delivering the insights solutions and insights delivery as part of Jockey Club Experiences, covering catering, C&E, hospitality and premium sales. The successful candidate will be a key business partner to decision makers across Jockey Club Experiences, using the data tools that they build using our cutting-edge technologies. We are Levy We are a visionary venue partner. We design and deliver bespoke guest experiences that prioritise people and the planet. Trusted by some of the world?s most iconic stadiums, entertainment venues, and major events from Wimbledon and Twickenham to Tottenham Hotspur Stadium, Edgbaston, the SEC and Excel London we bring experiences to life with passion and precision. Our mission is to succeed the right way. From pioneering tech and seamless operations to show-stopping menus and exceptional service, we use insight and innovation to understand guests, improve the customer journey, reduce environmental impact, and support local communities. We are a passionate, diverse team of venue specialists dedicated to making the planet better for future generations. Insights Manager - The Role • Deliver a holistic package of data and insights to decision makers at selected venues that covers strategic and tactical decisions around pricing, operations, commercials, sustainability, guest experience, and technology., • Develop action plans alongside operations to maximise revenue and margin, exploring the potential impact of changes, and informing ROI models to ensure the right decision is made. Support ongoing review of performance and deliver analytics that answer the 'so-what' question., • Provide insights and data tools to inform sustainable business practices, guiding decision-makers on the right sustainable options and what their impact might be., • Deliver data support around guest experience including ideal data collection methodologies before then using the data to inform decisions around changes to the venue to deliver a great service for our guests., • Work with the BUILT team to identify opportunities for technology and innovation to improve performance including solution ideation, implementation support and post-implementation monitoring., • Inform and deliver client reporting packs including financial performance, operational statistics, and value-add analytics to maximise the value delivered for our client partners. This would be in conjunction with operations, finance, HR, and any other relevant teams., • Design and develop the right data ingestion and data cleansing processes to inform and drive insights reporting tools for both external and internal users. Own the end-to-end process that generates automated reporting, scheduled reports and intra-company data transfers to enable reporting., • Inform and take part in internal client review meetings and processes, supporting the operations, finance and HR teams to deliver learnings and improvement. Use data and analytics to inform decision making around venue master plans and enhancements., • Demonstrate a growth mindset with a willingness to learn and take on new responsibilities within the team., • Take ownership of processes and demonstrate pride in solving problems independently. What we're looking for • Planned and methodical - displays the ability to be planned and methodical in their approach, with an objective and considered point of view., • Value focus - supports decision makers with strategic, financial and operational decisions with a strong commitment to deliver value to clients and colleagues., • Embraces change - is involved with and embraces the change discussion focussing on improvements with key stakeholders, before driving and supporting change at venues., • Analytical approach - data driven in their approach to establishing business solutions, understands and drives the use of data in informing strategic approach., • Knowledge hungry - strives to continually learn more, growing breadth and depth of knowledge to enhance personal development and deliver on business objectives., • Commercial focus- understands how operating models are built and what levers can be utilised to improve performance utilising a data driven approach., • Flexible and agile - balances structured approach, resilience, and problem-solving skills with ability to flex and adapt as required. Appreciates need for speed of action and reaction without diluting quality of results., • Self-starter - able to work independently and deliver to deadlines, taking the initiative to ensure the correct approach is taken., • Communicates effectively - delivers insights in the right communication style and medium to maximise the impact of analytics and data. Skills Specification • Advanced Microsoft Excel, • Excellent critical thinking and analytical skills, • A growth mindset, • Expertise in Microsoft Power BI or similar analytical tools desirable, • Financial training or exposure desirable What you'll get in return • Competitive salary with bonus and full company benefits, • 23 days' annual leave plus bank holidays, your birthday off, and a holiday purchase scheme, • Healthcare & wellbeing: Aviva Digicare, Medicash (dental, optical, therapy treatments), • Mental health support: 24/7 Employee Assistance Programme, • Family benefits: Enhanced maternity, paternity, and adoption leave. 2 days additional leave after returning from maternity leave, day off for your babys first birthday, enhanced family leave, • Perks & discounts: Shopping, entertainment, and travel discounts, 20% off Nuffield Health and 10% off PureGym memberships, • Financial wellbeing: Pension scheme, Life Assurance, preferred rates on salary finance products, • Development opportunities: Professional subscriptions, ongoing training and structured career pathways, • Meals on duty included Why Join Us? Levy UK & Ireland is part of Compass Group, the worlds largest catering company, and a vibrant leader in hospitality. We believe in celebrating individuality and building inclusive teams where everyone feels they belong. Our diverse team fuels creativity, innovation, and excellence. We are proud to be an equal opportunities employer and welcome candidates from all backgrounds to join us in creating a supportive, empowering workplace where everyone can thrive. Together, we create unforgettable experiences and shape the future of hospitality. As part of Compass you'll help to feed people, fuel progress and forge connections in around 6,000 venues. Join us to grow your career with the industry leader, and get competitive pay, great perks and unrivalled opportunities for learning and development, at one of the UK's biggest businesses. Job Reference: com/0209/76624001/52830964/SU #Levy UK Compass Group UK&I is committed to fostering an environment where every individual can truly be themselves at work and has equal opportunities to advance in their careers. We strive to build a culture that respects and celebrates the unique talents, beliefs, backgrounds, and abilities of all our team members. We want our colleagues to feel valued, empowered to reach their full potential, and to thrive - because diversity is our strength! JBRP1_UKTJ

BAM UK & Ireland's Infrastructure segment are seeking a motivated and experienced Senior Environmental Sustainability Advisor with a strong background in carbon management to coordinate the delivery of carbon management deliverables in our Transport Sector business. Reporting to the Sector Carbon Manager and project Environmental leads, you will be responsible for carbon management activities for a range of UK transport infrastructure projects, including a large high speed rail project located in southern England. This role will lead on stakeholder engagement to compile whole life carbon impact assessments, identify and champion carbon reduction opportunities, and deliver carbon management in alignment with PAS2080:2023. This position presents an exciting opportunity to contribute to the delivery of critical infrastructure projects, driving substantial reductions in carbon through innovative and strategic approaches. Your Team • You will be partially based out of a project office either in London or Birmingham, • minimum 3 days office / site each weekMaking Possible You will lead on carbon management activities across a range of projects, acting as the primary liaison for managing supply chain partners in carbon reduction efforts and ensuring alignment between project goals and BAM's sustainability strategy. Key responsibilities will include: Opportunity identification and management • Plan, coordinate, and chair regular carbon meetings to discuss implementation progress, • Develop and maintain a broad and comprehensive understanding of opportunities for carbon reduction, • Work collaboratively with the wider supply chain team to identify and implement whole life carbon reduction opportunities, including client, contracting partners, designers, subcontractors and suppliers, • Contribute to, and be prepared to lead, on the development and testing of innovative carbon reduction technologies and methods Carbon data • Compile whole life carbon emissions data and prepare reports for submission using client tools, • Provide analytical support to quantify potential carbon savings as they are identified throughout project development Reporting & deliverables • Fully understand client's carbon requirements, contract conditions, and their implications to ensure processes are in place to meet those requirements, • Develop and periodically update and issue the Carbon Management Plan (CMP) and life cycle impact assessment reports, • Coordinate with internal and external stakeholders to keep documentation up to date, • Report on project advancements, carbon reduction opportunities, and actions required to wider stakeholders as required Continuous improvement • Champion the development and testing of carbon reduction innovation opportunities, • Foster a culture of continuous improvement by tracking and sharing best practices, • Contribute lessons learnt to the wider BAM UK&I business through sharing of case studies and other knowledge transfer activities, • Deliver carbon-related training and presentations to colleagues and external stakeholdersWhat do you bring to the role? Required: • Strong background in sustainability, embodied carbon assessment, or environmental management in infrastructure or construction projects., • Understanding of carbon management principles and PAS2080, • Understanding of industry best practices, opportunities and methods for reducing carbon emissions from infrastructure construction, • Familiarity with carbon accounting principles, life cycle assessment (LCA), and relevant software tools, eg etool, • Ability to work collaboratively across multi-disciplinary teams, including design, construction, and client teams., • Strong project management, collaboration and stakeholder engagement skills., • Proficiency in data analysis and reporting, with attention to detail. Desirable: • Experience in large-scale infrastructure design and/or construction., • Understanding of government policies and regulations related to carbon reduction Desirable Qualifications: • Degree in environmental science, sustainability, engineering, or a related field., • Practitioner status or working towards a relevant professional accreditation (e.g., ISEP (formerly IEMA), ICE, CIBSE)., • Minimum three years' experience in a sustainability role, including whole life carbon assessment, ideally in the construction industry and infrastructureWhat's in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional developmentAbout BAM Building a sustainable tomorrow. That's our mission and our promise at BAM. It's how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. We're on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. JBRP1_UKTJ

Key responsibilitiesLead environmental delivery across both projects on a day-to-day basisManage environmental permits, licences, consents and approvalsProduce and maintain documentation (including CEMPs)Identify environmental risks and ensure effective mitigations are implementedCoordinate ecology,

You will also deliver environmental awareness training and toolbox talks (TBTs) to staff, lead investigations into environmental incidents and recommend corrective actions, and assist in achieving and maintaining relevant environmental certifications. Reporting to the SHE Manager, our client is seek

The HSE Manager is responsible for coordinating all activities required to ensure that the installation of our systems on sites is carried out in compliance with all current regulations and in line with all our clients’ requirements on various sites across the UK. Lead and continually improve the

Health, Safety and Environmental Manager. A well-established multi-site food manufacturer is looking to appoint a Health, Safety and Environmental Manager to join their West Midlands site. As the HSE Manager, you will hold ultimate accountability for ensuring the site operates in full compliance wit

Environmental qualification, such as ISEP/IEMA, NEBOSH Environmental or equivalent. An established groundworks contractor is looking to appoint an experienced Health & Safety Manager with strong environmental management expertise to join its existing H&S team. Demonstrable environmental management e

Manage one environmental professional while collaborating with a broad range of technical specialists, stakeholders and contractor teams to drive excellent environmental performance. With key environmental impact areas including landscape, ecology and wider environmental considerations, you ll have

A leading environmental contracting firm in the UK is seeking an experienced Site Manager to lead civils and environmental projects. The ideal candidate should have strong leadership skills, a relevant qualification, and experience in civils or environmental projects.

Ciwmjobs in Warrington is seeking an Environmental Manager in a newly created leadership role across environmental, surveying and infrastructure projects. This permanent, full-time position offers genuine influence, long-term career progression and the opportunity to drive the development of the env

We are looking for an experienced Site Manager to join our contracting team, delivering a diverse portfolio of civils and environmental projects across the UK. If you’re an experienced Site Manager looking to play a key role in delivering meaningful environmental and infrastructure projects, we’

A well-established multi-site food manufacturer is looking to appoint a Health, Safety and Environmental Manager to join their West Midlands site. As the HSE Manager, you will hold ultimate accountability for ensuring the site operates in full compliance with all relevant UK safety and environmental

Health, Safety & Environmental Manager. We are currently recruiting for an EH&S Manager to take responsibility for developing and maintaining a proactive Health, Safety and Environmental culture across the business. Health, Safety & Environmental Manager Roles and Responsibilities:.

Applicants should have substantial operational management experience within a local-authority environmental health, public protection, regulatory services, community safety or environmental enforcement function. A local authority is seeking an experienced Operations Manager to establish and lead a s

With key environmental impact areas including landscape, ecology and wider environmental considerations, you ll have the opportunity to tackle complex challenges, shape practical solutions and make a visible difference. Work alongside engineering, environmental and delivery specialists to develop pr

ResponsibilitiesProvide clear leadership to the E&S team and Tier 1 contractorsEnsure full compliance with environmental permits, licences, consents, and ISO 14001Oversee site inspections, surveillance, and performance monit

Were looking for an Environmental Permitting Manager to join our Environmental Regulation and Permitting Team and play a vital role in safeguarding Yorkshires rivers, coastal waters, and communitiesnow and for generations to come. The Environmental Permitting Manager will lead the team to deliver ti

Requires team leadership, environmental understanding, IT skills, and client consultation. Full-time Operations Manager role involving fieldwork and desk-based work to lead project delivery.

Senior Environmental Manager needed for a construction group in Yorkshire, responsible for environmental compliance, performance, and team leadership across multiple projects.