Maintenance jobs in AberdeenCreate job alerts

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the Scotland: Aberdeen Edinburgh Kilmarnock A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: Either: • NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or • 5+ years’ experience as a Vehicle Technician/Mechanic and • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,170, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the Scotland: Aberdeen Edinburgh Kilmarnock A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: Either: • NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or • 5+ years’ experience as a Vehicle Technician/Mechanic and • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,170, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Role Overview \n \n \nWould you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity?\n \n \nOtis is growing and is looking for a maintenance mechanic for one of our entities. You will ensure the safety of passengers by safely maintaining a portfolio of lifts and escalator units.\n \n \nOn a typical day you will:\n \n\n • Perform routine service checks o...\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Job No. BBUK20380 Risk Manager - Aberdeen Power T&D Risk Audit Quality About the role Balfour Beatty’s Power Transmission & Distribution business is delivering some of the UK’s most ambitious energy infrastructure projects, driving decarbonisation and innovation at every turn.We are seeking a Risk Manager to join our Power T&D Innovation Team. In thisrole, you will lead the development, challenge, governance and management of project risk information across both the baseline risk process and in-flight delivery stage. The role will provide project-facing risk leadership, ensuring risk registers are technically robust, commercially aligned, evidence-based, client-facing where required and capable of supporting project governance, GTIC/BTIC review, client scrutiny and portfolio-level reporting.Hybrid working - 3 days in the office and 2 days working from home What you'll be doing Lead the development, review and governance of project risk registers across Stage 1 and Stage 2 Project Lifecycles.Lead collaborative risk workshops with commercial, project, estimating and client risk teams.Challenge risk identification, root-cause analysis, risk structuring, ownership, mitigation and residual exposureReview and validate 3-point cost and schedule estimates, probability assumptions and concurrency logicEnsure QSRA inputs are aligned with the project programme, quantified risk position and delivery assumptionsEnsure risk registers are GTIC/BTIC-ready and client-facing versions are suitable for review and sign-offLead in-flight risk management, including emerging risk assessment, mitigation tracking, contingency movement and exposure updatesSupport client risk reduction meetings and ensure actions are captured, owned and reflected in the live risk positionSupport compensation event recovery through clear risk data, evidence, exposure movement and supporting narrativeProduce project and group-level reporting that provides clear, data-driven insight for leadership and governance forumsGuide Risk Analysts and support consistent data quality, version control, evidence capture and reporting outputs Who we're looking for Professional certification such as Institute of Risk Management membership or APM Risk Practitioner (desirable)Experience working in a dedicated Risk Management role within medium to large organisations.Strong understanding of risk and control processes and their application across complex business environments.Excellent communication, interpersonal, and influencing skills, with the ability to engage senior management and stakeholders at all levels.QCRA / QSRA experienceProven ability to build and maintain strong relationships across multiple stakeholder groups.Skilled in workshop facilitation and delivery of training sessions Why work for us Day in, day out, our teams deliver some of the UK’s most ambitious, exciting and meaningful projects; developing, building and maintaining the vital infrastructure that supports national economies and strengthens communities.Why join us?As if contributing to and supporting work that makes life better for millions wasn’t rewarding enough, we offer a full range of benefits too. You’ll have the freedom to shape the package that’s right for you and your life. Here are some of our key benefits:- Smart working, giving you more flexibility such as staggered start and finish times,- 25 days paid annual leave (pro rata)- Family friendly policies which include 28 weeks full pay for maternity/adoption leave and four weeks full pay for paternity/partners leave- Pension, share incentive plan, volunteering leave, recognition schemes and much more… About us Balfour Beatty’s Power Transmission & Distribution teams work with regional, national and international electricity network owners and operators to provide technical engineering solutions across the full spectrum of the electricity grid, including overhead lines, cabling, substations and distribution networks.From scoping and feasibility, to design, construction and on-going maintenance, our in-house experts, flexible resources and industry-leading innovations support customers in the development of some of the UK’s most ambitious power transmission and distribution projects.Diversity and inclusionAt Balfour Beatty we believe that diversity and inclusion are essential components of any successful, happy workplace. Through our Value Everyone Diversity and Inclusion Strategy and Action Plan, we are growing our diverse workforce and developing our inclusive culture where everyone is able to thrive and reach their full potential, regardless of their identity or background. To find out how we are making this a reality, visit www.balfourbeatty.com/diversityandinclusionWe are a Gold Award holder in the Ministry of Defence 'Employer Recognition Scheme' and actively encourage applications from Armed Forces personnel, veterans and reservists.As a Disability Confident Employer, we are committed to working with people who have disabilities and long-term health conditions to remove barriers for them in obtaining employment. We are also committed to offering applicants with a disability an interview if they meet the minimum requirements for the role. For more info, visit: https://disabilityconfident.campaign.gov.uk/We are looking to continually improve our resourcing process and ensure that it is fair and inclusive for all. If you have any feedback on the process, please share this with us at: candidaterecruitmentqueries@balfourbeatty.comShow moreShow less

Marine Electrician (Offshore) Are you a Marine Electrician looking for your next opportunity? Do you have offshore experience, a time-served apprenticeship, and strong AC/DC and LV electrical knowledge? If so, this could be the perfect role for you. Our client, a well-established offshore services company, is seeking a Marine Electrician to join their team in Aberdeen. The successful candidate will have a strong electrical background, experience working within marine or industrial environments, and the ability to maintain, repair, and troubleshoot a wide range of AC/DC and LV electrical systems.Marine Electrician (Offshore)Permanent PositionSalary: Competitive (DOE)Monday to FridayAberdeenMarine Electrician (Offshore) Job Description • Carry out installation, maintenance, inspection, and repair of AC/DC and LV marine electrical systems and equipment• Diagnose and rectify electrical faults on offshore and marine assets• Perform planned preventative maintenance (PPM) activities to ensure equipment reliability and compliance• Install, terminate, and test electrical cabling, switchboards, control panels, motors, generators, and associated equipment• Conduct inspection, testing, and commissioning of AC/DC and LV electrical systems• Read and interpret electrical drawings, schematics, and technical documentation• Support commissioning, upgrades, and modification projects on electrical systems• Ensure all work is completed safely and in line with offshore, marine, and electrical industry standards• Liaise with clients, vessel crews, and internal departments to deliver projects effectively• Maintain accurate maintenance records, reports, and certification documentation• Contribute to continuous improvement initiatives and operational best practicesMarine Electrician (Offshore) Essential Experience / Skills / Qualifications • Time-served Electrical Apprenticeship• 18th Edition Wiring Regulations qualification• Minimum 5 years' experience within the electrical or marine industry• Experience working with AC/DC and LV electrical systems within marine, offshore, industrial, or heavy engineering environments• Strong fault-finding, maintenance, testing, and troubleshooting skills• Experience with motors, generators, switchboards, control panels, and distribution systems• Ability to read and interpret electrical schematics and technical drawings• Experience with electrical testing, inspection, and commissioning activities• Good understanding of health, safety, and compliance requirements within offshore environments• Excellent communication and organisational skills• Ability to work independently and as part of a team If you, or anyone you know are interested in the role, click apply or send your CV to

Job Title: Multi Skilled Maintenance Engineer \n Location: Aberdeen \n Salary: £40,000- £47,000 \n Shift: 4 on 4 off days \n Job Role of the Multi Skilled Maintenance Engineer \n A superb opportunity has arisen for a Multi Skilled Maintenance Engineer to join a supportive and collaborative engineering team within a busy manufacturing site. The company prides itself on a positive working culture where teamwork and mutual respect are at the centre of daily operations. \n You will be responsible for both electrical and mechanical maintenance, responding to breakdowns, completing planned preventative maintenance, and supporting continuous improvement initiatives across site machinery. \n Sector - Factory Maintenance \n Non-Negotiable Requirements of the Multi Skilled Maintenance Engineer \n\n • Multi-skilled maintenance experience within an industrial environment- Including Forces\n, • Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced industrial factory.\n\n Requirements for the Multi Skilled Maintenance Engineer \n\n • Electrical and mechanical fault-finding experience.\n, • Engineering qualification (Electrical or Mechanical).\n, • Experience working within a manufacturing environment.\n\n Desirable Requirements for the Multi Skilled Maintenance Engineer \n\n • Previous experience working as a Maintenance Engineer in the UK.\n, • Experience with working on PLC's, ideally being able to fault find using inputs and outputs\n\n The Multi Skilled Maintenance Engineer will benefit from: \n\n • Working for a recognised market-leading business.\n, • Excellent benefits package including pension, life insurance, and gym access.\n, • Training and development opportunities for engineers.\n\n \n If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. \n For further details contact Eyleesha Bhatti Pioneer Selection \n \n As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. \n \n You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. \n

Location: Helensburgh\n Pay rate: £15.67 per hour\n Hours: 36 hours per week, Monday to Friday\n Contract: Full-time, Permanent\n \n \nAre you hands-on, hardworking, and enjoy working outdoors? We're looking for a Grounds Person to join our team and help ensure our outdoor areas are maintained to a high standard, remaining clean, safe and well-presented all year round.\n \n What You'll Be Doing\n \n\n • Maintaining lawns, hedges,...\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Mechanical Fitter / Assembler£34,000 - £36,000 + Training + Overtime + Progression + Days-Based + Excellent Company BenefitsAberdeen - Commutable from Westhill, Inverurie, Balmedie, Stonehaven, Ellon and Surrounding AreasAre you a Mechanical Fitter or an Assembly Technician, and are you looking for a day-based role where you can further your career with excellent training?This is an excellent opportunity to join a secure company that is renowned for investing in its staff and offers plenty of chances to increase your earnings through overtime.The company is a manufacturer supplying various industries and has invested significantly in its growth recently. They ensure all engineers are industry experts through training and development.In this workshop-based role, you will manufacture a broad range of products and sub-assemblies by assembling and fitting mechanical components, and by testing and fault-finding to resolve issues.This role would suit a Mechanical Fitter from a manufacturing/production background, looking to join a growing company in a secure role with specialist training, progression, and plenty of overtime.The Role: \n\n • Assembly and fitting of mechanical components\n, • Ongoing training + Company Benefits\n, • 7:30am - 4:00pm // Mon - Fri (Days)\n\n The Person: \n\n • Mechanical Fitter / Assembly Technician\n, • Manufacturing / Production background\n, • NVQ Level 3\n, • Commutable to Aberdeen\n\n Mechanical, Mechanic, Mechanically Biased, Maintenance, Mechanical Fitter, Assembly Technician, Assembly Fitter, Fault Finding, Manufacturing, Production, Fitting, Testing, Aberdeen, Westhill, Inverurie, Balmedie, Stonehaven, Ellon, ScotlandReference Number: BBBH275213To apply for this role or to be considered for further roles, please click "Apply Now" or contact Josh Cooper at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

For the position of a Fleet Specialist, you'll have the possibility of working in two different areas, depending on workload and suitability. We have our mechanical team, where you will be responsible for the maintenance and repair of our vehicles. This means keeping our e-bikes in top shape and providing strong support to our team on the ground. We also have our in-field team, where you'll be uti... \n \n \n \n ZIPC1_UKTJ

MAINTENANCE ENGINEER\n Job Title – Maintenance EngineerLocation – Portlethen, AberdeenshireSalary – £46,386Shift – 4 on 4 off (Days – 6am–6pm, flexibility required) Job Role of the Maintenance Engineer\n A fantastic opportunity has arisen for a Multi Skilled Maintenance Engineer to join a well-established and secure food manufacturing business supplying major UK retailers. This is a great opportunity for an engineer looking for long-term stability and job satisfaction within a fast-paced production environment. \n Working as part of the engineering team, you will provide effective maintenance support across the site, carrying out both planned and reactive maintenance on a wide range of production and packaging machinery. The role involves working closely with production teams to minimise downtime, improve performance, and ensure smooth operation of all equipment. \n You will be working on machinery such as conveyors, packers, weighers, mixers, slicers, fillers, automated feeders, and PLC-controlled systems within a high-speed environment. \n Sector – Industrial Manufactruring Non-Negotiable Requirements of the Maintenance Engineer\n\n • Level 3 or above in Engienering\n, • Factory, Manufacturing or Forces background \nRequirements for the Maintenance Engineer\n\n, • Multi-skilled engineer (electrical or mechanical bias, approx. 70/30 split)\n, • Strong fault-finding and diagnostic skills\n, • Experience working with PLC-controlled machinery, sensors, and automated systems\n, • Knowledge of hydraulics, pneumatics, and mechanical systems\n, • Engineering qualification (Level 3 minimum)\n, • Ability to work on your own initiative and take a proactive approach\nDesirable Requirements for the Maintenance Engineer\n\n, • Experience within food or meat processing environments\n, • Understanding of refrigeration, steam, and site services\n, • Strong root cause analysis and continuous improvement experience\nThe Maintenance Engineer will benefit from:\n\n, • Working for a well-established and secure manufacturing business\n, • 4 on 4 off shift pattern providing good work-life balance\n, • Subsidised canteen and staff discounts\n, • Pension scheme and life assurance\n, • Training and development opportunities\n, • Employee assistance programme\n, • Cycle to work scheme\n, • Long-term career stability within a growing organisation\n\n If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. \n

Electrical Engineer (CompEx / Manufacturing) \n £22 - £25 Per Hour + Training + Progression + Life Insurance + Free Parking + Early Friday Finish \n Aberdeen \n Are you a Time Served Electrician or Electrical Engineer with experience working in hazardous areas, looking to join a specialist manufacturer providing the chance to work on industry-leading equipment? \n On offer is the opportunity to join a well-established specialist manufacturer of subsea equipment, supplying innovative solutions to safety-critical and hazardous-area industries. With continued growth and a strong project pipeline, this is an ideal time to join a stable business offering long-term career development. \n You will be responsible for overseeing electrical installations, producing electrical certification and documentation, supporting hazardous area equipment builds, and mentoring workshop staff to ensure work is completed safely and to the highest standard. \n This role would suit a Time Served Electrician or Electrical Engineer with a strong electrical installation or maintenance background, who is EX01-EX04 qualified. \n \n The Role \n\n • Provide electrical support to workshop staff, ensuring work is completed efficiently and to a high standard\n, • Oversee electrical equipment installation within a manufacturing environment\n, • Produce electrical documentation and certification for units under build\n, • Ensure compliance with hazardous area installation requirements (ATEX / IECEx)\n, • Assist in the preparation and execution of FAT (Factory Acceptance Testing) procedures\n, • Support the production of ATEX and associated certification documentation\n, • Supervise and mentor team members and contractors when required\n, • Monday to Thursday, 7:30 - 4, 3:30 finish on a Friday\n\n \n The Person \n\n • Time-served Electrician or qualified Electrical Engineer\n, • Knowledge of ATEX and IECEx standards\n, • CompEx EX01-EX04 qualified\n\n \n \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n \n Reference Number: BBBH26572 \n \n Keywords: Electrical Engineer, Electrician, Time Served Electrician, Industrial Electrician, Manufacturing Electrician, Workshop Electrician, Electrical Technician, Electrical Installation, Electrical Maintenance, Electrical Assembly, Electrical Manufacturing, Electrical Systems, Industrial Electrical, Electrical Engineering, Hazardous Areas, Hazardous Area Equipment, Hazardous Area Installation, Hazardous Area Compliance, ATEX, IECEx, CompEx, CompEx EX01-04, EX01, EX02, EX03, EX04, Electrical Certification, Electrical Documentation, Technical Documentation, Electrical Drawings, Electrical Schematics, Electrical Testing, Inspection & Testing, Factory Acceptance Test, FAT, FAT Procedures, Commissioning, Electrical Commissioning, Control Panels, Panel Wiring, Instrumentation, Process Control, Industrial Equipment, Manufacturing, OEM, Oil & Gas, Petrochemical, Process Industry, Mechanical & Electrical, M&E, Workshop Engineering, Engineering Support, Technical Support, Team Leadership, Supervising Engineers, Mentoring, Contractor Management, Quality Assurance, Health & Safety, Electrical Regulations, Compliance, Engineering Standards, Problem Solving, Industrial Engineering, Production Engineering, Installation Engineer, Service Engineer, Maintenance Engineer, Electrical Fault Finding, Continuous Improvement, Aberdeen, Dyce \n \n We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. \n \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n \n \n \n \n

Mechanical / Hydraulic Workshop Technician \n Aberdeen | £35,000 - £40,000 DOE | Offshore & International Travel | Permanent \n Looking for a hands-on role with a growing engineering business delivering specialist equipment to major global energy projects? \n We're seeking a Mechanical / Hydraulic Workshop Technician to join an innovative Aberdeen-based engineering company. You'll be involved in the assembly, testing, maintenance and mobilisation of specialist mechanical and hydraulic equipment, with opportunities to travel offshore and internationally. \n What we're looking for: Strong mechanical and hydraulic experience Practical fault-finding and problem-solving skills Ability to read engineering drawings and hydraulic schematics Flexible approach to occasional offshore and overseas travel Team player with excellent communication skills \n What's on offer: Work on industry-leading specialist equipment International travel and offshore opportunities Ongoing training and career development Supportive and forward-thinking team environment \n If you're looking for a varied workshop role with genuine progression opportunities, we'd love to hear from you.

Mechanical Fitter (Pumps / Rotating Equipment) Competitive Salary + Overtime + Monday - Friday + Excellent Company Benefits Aberdeen (Commutable from Inverurie, Kintore, Westhill, Ellon and Huntly) \n Are you a Mechanical Fitter from a pumps or rotating equipment background, looking to join a leading company offering a long-term secure position within am experienced tight knit team? \n On offer is a fantastic opportunity to join a growing company, who have a great reputation for looking after their staff, providing plenty of overtime to maximise your earnings. \n This company is highly regarded specialist in pump and rotating equipment services, offering an opportunity to work on a wide variety of technically interesting equipment for customers across the globe. \n You will be responsible for inspection, disassembly and repair of pumps and rotating equipment, while assisting in creating reports and working to deadlines. \n This role would suit a Mechanical Fitter looking for varied work, long-term stability, excellent company benefits and plenty of overtime. \n The role: \n\n • Disassemble, inspect and repair pumps and rotating equipment\n, • Site based position in the companies fully equipped service centre\n, • Monday - Friday 37 hours\n\n The candidate: \n\n • Mechanical Fitter\n, • Background working with pumps and rotating equipment\n, • Ability to read technical drawings\n\n \n \n Mechanical Fitter, Pump Fitter, Service Engineer, Rotating Equipment, Centrifugal Pumps, Pump Repair, Pump Maintenance, Strip and Rebuild, Gearboxes, Time-Served Fitter \n Reference Number: BBBH277469To apply for this role or to be considered for further roles, please click "Apply Now" or contact Atisha Das at Rise Technical Recruitment \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

NMS Recruit is seeking a Project Manager to join a global leader in the turbomachinery industry.This opportunity is ideal for an experienced Project Manager, Mechanical or Commissioning Engineer looking to transition into project management. The successful candidate will have proven experience working with turbomachinery and rotating equipment, along with the technical knowledge and commercial awareness to manage projects from initiation through to completion.Please note that applicants must already have the right to work, as visa sponsorship is not available for this position.You will be responsible for the initiation, planning, execution, monitoring, control, and close-out of field service projects, as well as self-buyer spares, inspection, and repair projects.The role also carries responsibility for driving the development and achievement of order intake, revenue, and profit targets, while supporting the growth and delivery of Business Unit products and services within the assigned territory.Responsibilities • Customer first point of contact in the event of service, spares, inspection/repair or upgrade requirements.• Manage and co-ordinate customer spares and service business for responsible accounts.• Ensure service delivery priorities are understood and achieved by both internal and external stakeholders.• Calculate and issue quotations for services provided by the local business.• Co-ordination of technical, administrative and commercial planning and scheduling of maintenance activities on turbomachinery equipment for field service personnel.• Arrange, review and compile all the necessary documentation and work instructions for the Field Service staff to complete planned activities safely including risk assessments and required safety documents.• Ensure the project management activities are executed in accordance with company policy and meet any applicable industry or regulatory requirement.• Ensure all projects are executed safely, on time and within budget.• Co-ordinate quotations for troubleshooting, service, repairs and technical support activities carried out by product centre.• Support growth strategies within the region (budget quotations, order intake, revenue/casing, customer visits).Experience• Mechanical Engineering degree or equivalent qualification.• 5-10 years Project Management experience in an Operational/Service environment or 5-10 years experience as a Field Service Engineer • Experience in sales promotion & service delivery activities.• Commercial awareness.• Knowledge of Turbomachinery aftermarket business stakeholders such as customers base, vendors, contractors and competitors.• Understanding of industry HSSE standards and other key business regulatory requirements.• Experienced using current digital platforms, MS-Office package, SAP, CRM.• P&L Management.• Technical expertise.• Implementation of new process technologies.Benefits \n\n • Salary up to £65,000 DOE\n, • 28 days holiday plus bank holidays\n, • Birthday off\n, • Hybrid working 3 days office/2 days home\n, • Enhanced pension scheme\n, • Private healthcare\n, • Company Vehicle\nImportant Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .

Job No. BBUK19827 Head of Planning - Aberdeen Power T&D Planning and Project Controls About the role As Head of Planning, you will lead the planning function across a portfolio of complex construction projects, ensuring alignment between project delivery and wider business objectives. Operating at a senior level, you will shape planning strategy, drive best practice, and provide leadership across planning and scheduling teams. This role is central to optimising project performance, influencing key decisions, and ensuring programmes are delivered efficiently, safely, and on time. What you'll be doing Providing strategic leadership across planning and scheduling, setting direction and ensuring consistency across projectsLeading, mentoring, and developing Planning Managers and wider planning teamsOverseeing the creation and management of detailed project programmes, including critical path analysis and change controlManaging planning input across tender and delivery stages to support successful project outcomesCollaborating with clients, project teams, and supply chain partners to ensure coordinated deliveryDriving performance through data, KPIs, and continuous improvement of planning processesEnsuring compliance with contractual, regulatory, and governance requirementsSupporting effective resource planning across labour, plant, and materialsPromoting a strong health and safety culture across all planning activities Who we're looking for A proven leader with extensive experience in planning and managing large, complex construction projectsStrong leadership capability, with a track record of developing and managing high-performing planning teamsExpert knowledge of project planning tools and systems (e.g. Primavera P6, MS Project, Excel)Deep understanding of construction planning methodologies, scheduling, and project controlsExperience in contract management, risk management, and performance reporting (including KPIs and earned value)Strong stakeholder management skills, with the ability to engage clients, supply chain, and senior leadershipAnalytical and data-driven, with the ability to solve complex problems and influence decision-makingExcellent communication, negotiation, and interpersonal skills Why work for us Day in, day out, our teams deliver some of the UK’s most ambitious, exciting and meaningful projects; developing, building and maintaining the vital infrastructure that supports national economies and strengthens communities.Why join us?As if contributing to and supporting work that makes life better for millions wasn’t rewarding enough, we offer a full range of benefits too. You’ll have the freedom to shape the package that’s right for you and your life. Here are some of our key benefits:- Smart working, giving you more flexibility such as staggered start and finish times, with up to 40% remote working, where roles allow.- 25 days paid annual leave (pro rata)- Family friendly policies which include 28 weeks full pay for maternity/adoption leave and four weeks full pay for paternity/partners leave- Pension, share incentive plan, volunteering leave, recognition schemes and much more… About us Balfour Beatty’s Power Transmission & Distribution teams work with regional, national and international electricity network owners and operators to provide technical engineering solutions across the full spectrum of the electricity grid, including overhead lines, cabling, substations and distribution networks.From scoping and feasibility, to design, construction and on-going maintenance, our in-house experts, flexible resources and industry-leading innovations support customers in the development of some of the UK’s most ambitious power transmission and distribution projects.Diversity and inclusionAt Balfour Beatty we believe that diversity and inclusion are essential components of any successful, happy workplace. Through our Value Everyone Diversity and Inclusion Strategy and Action Plan, we are growing our diverse workforce and developing our inclusive culture where everyone is able to thrive and reach their full potential, regardless of their identity or background. To find out how we are making this a reality, visit To help and support us with our desired commitment to create an inclusive culture we are members of WISE, enei, Business Disability Forum and the Association for Black and Minority Ethnic Engineers (AFBE). In 2020, we signed the Audeliss and Involve Open Letter to demonstrate our commitment to taking key long term and sustainable actions on Black Inclusion. Balfour Beatty is also a Gold Award holder in the Ministry of Defence 'Employer Recognition Scheme' and actively encourage applications from Armed Forces personnel, veterans and reservists.As a Disability Confident Employer, we are committed to working with people who have disabilities and long-term health conditions to remove barriers for them in obtaining employment. We are also committed to offering applicants with a disability an interview if they meet the minimum requirements for the role. For more info, visit: We are looking to continually improve our resourcing process and ensure that it is fair and inclusive for all. If you have any feedback on the process, please share this with us at: candidaterecruitmentqueries@balfourbeatty.comShow moreShow less

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.About the role At Sulzer, innovation and excellence are at the heart of everything we do. Our Ellon Service Centre is one of Sulzer's flagship rotating equipment service facilities, providing world-class repair, maintenance and engineering solutions for critical turbomachinery and gas compression equipment across a wide range of industries.As the Technical Focal Point for Gas Compression, you will serve as the first point of contact for technical guidance relating to gas compression equipment and workshop procedures. You will work closely with customers, workshop personnel, field service teams and engineering colleagues to deliver technically sound recommendations and exceptional customer support.This is a highly visible role requiring strong technical knowledge, excellent communication skills and a customer-focused approach.Your ResponsibilitiesAct as the primary technical focal point for gas compression activities within the service centre.Provide technical guidance to workshop teams regarding repair methods, procedures and best practices.Support the wider engineering team in determining the optimum approach to work execution.Provide troubleshooting expertise for complex repair and operational issues.Liaise closely with engineering colleagues and other technical specialists when required.Attend customer meetings as the technical representative for gas compression projects.Accompany customers during witness testing activities, providing technical advice and support.Present technical findings, recommendations and repair solutions to customers.Build strong customer relationships through professional technical support and expertise.Review workshop findings and provide recommendations for repair solutions.Participate in failure investigations within Sulzer service centres and at customer sites.Deliver technical advice, coaching and training to internal teams where required.What You BringQualificationsHNC, HND or Degree in Mechanical Engineering or a related discipline.Experience & Technical KnowledgeSignificant experience with gas compression equipment.Previous engineering experience within rotating equipment, turbomachinery or related industries.Understanding of vibration analysis and machinery diagnostics.Experience preparing technical reports and presenting engineering recommendations.Knowledge of repair methodologies and failure investigation practices.Skills & BehavioursStrong influencing and persuasion skills.Comfortable engaging with customers and presenting technical information.Excellent interpersonal and communication skills with the ability to interact at all levels.Strong organisational skills and ability to manage multiple priorities.Effective time management skills with flexibility to adapt to changing business demands.High attention to detail and commitment to quality.Ability to work collaboratively across multidisciplinary teams.Competent user of Microsoft Office, including Word, Excel and Outlook.Committed to adhering to company standards, procedures and safety requirements.Travel RequirementsThe successful candidate must be willing to travel to customer sites and Sulzer locations as required, both within the UK and occasionally internationally.What we offer youA competitive basic salaryAnnual bonus schemeCar/Car Allowance33 days annual leave.Defined pension contributions.Access to Medicash helping you cover everyday health costs like dental optical and physiotherapy plus a range of wellbeing perks.Confidential support via Employee Assistance Programmes.Access to discounts on shopping entertainment lifestyle plus opportunity to apply for Costco membership.Discounted personal car leasing for you your family and friends.Long Service Awards celebrating your commitment.Continuous learning opportunities through Sulzer Learning Pathways.We're proud to support those who've served. Sulzer is a Bronze Award holder under the MoDs Defence Employer Recognition Scheme meaning we actively welcome and support ex-military personnel and reservists in building successful careers with us.Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.We are proud to be recognized as a Top Employer 2026 in Brazil, Canada, China, Finland, Germany, Ireland, Mexico, Switzerland, South Africa, the UK and the USA.SummaryLocation: AberdeenType: Full time

What you'll be doing Manage delivery of the Design & Engineering project scope of works.Deliver the D&E scope of works to programme, budget, quality and safety.Identify and manage D&E project risks, implementing the necessary mitigations.Lead the Design Engineers and interfaces with other parties, through effective communication.Ensure adherence to Governance processes, the Gated Lifecycle and Right First Time. Who we're looking for Degree level education or the equivalent with formal training in Civil, Electrical or Mechanical Engineering.Working towards Incorporated membership of ICE, IMechE or IETExperience Leading Engineering teams, in the delivery of design and build construction or installation projectsFamiliarity with the Power Industry is beneficial Why work for us As if contributing to and supporting work that makes life better for millions wasn’t rewarding enough, we offer a full range of benefits too. You’ll have the freedom to shape the package that’s right for you and your life. Here are some of our key benefits:Smart working, giving you more flexibility such as staggered start and finish times, with up to 40% remote working, where roles allow.25 days paid annual leave (pro rata)Family friendly policies which include 28 weeks full pay for maternity/adoption leave and four weeks full pay for paternity/partners leavePension, share incentive plan, volunteering leave, recognition schemes and much more… About us Balfour Beatty’s Power Transmission & Distribution teams work with regional, national and international electricity network owners and operators to provide technical engineering solutions across the full spectrum of the electricity grid, including overhead lines, cabling, substations and distribution networks.From scoping and feasibility, to design, construction and on-going maintenance, our in-house experts, flexible resources and industry-leading innovations support customers in the development of some of the UK’s most ambitious power transmission and distribution projects.Diversity and inclusionAt Balfour Beatty we believe that diversity and inclusion are essential components of any successful, happy workplace. Through our Value Everyone Diversity and Inclusion Strategy and Action Plan, we are growing our diverse workforce and developing our inclusive culture where everyone is able to thrive and reach their full potential, regardless of their identity or background. To find out how we are making this a reality, visit www.balfourbeatty.com/diversityandinclusionWe are a Gold Award holder in the Ministry of Defence 'Employer Recognition Scheme' and actively encourage applications from Armed Forces personnel, veterans and reservists.As a Disability Confident Employer, we are committed to working with people who have disabilities and long-term health conditions to remove barriers for them in obtaining employment. We are also committed to offering applicants with a disability an interview if they meet the minimum requirements for the role. For more info, visit: https://disabilityconfident.campaign.gov.uk/

In accordance with company procedures and direction of Workshop Manager and Lead Workshop Electrician. Cammach is currently recruiting for an ROV Workshop Electrical Technician on behalf of our Aberdeen-based client for a 12-month contract. Assist in carrying out maintenance, repair and upgrade acti

Join Our Team as a Skilled Truck and Trailer Technician! Are you passionate about trucks and trailers? Do you have a knack for diagnosing and repairing electrical and mechanical faults? If so, we have the perfect opportunity for you!. Qualified up to NVQ Level 3 in Heavy Goods Maintenance or equival

Worldwide, energy asset owners choose CB&I Asset Solutions as their asset management partner, confident in our ability to deliver tailored, value driven asset management solutions. \n \n Our commitment is simple but powerful: to deliver value to our customers through safe, effective and efficient operations, maintenance, wells and decommissioning solutions, specialising in late life energy assets. \n \n We're committed to investing in our people, and to building exceptional teams who deliver. Our people are trusted by our customers to safely operate their energy assets, improve performance and extend asset life through innovative solutions. \n \n We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week. \n \n Think smarter. Move faster. Deliver value. \n \n JOB TITLE: IT ANALYST - SERVICE DELIVERY \n \n This job is a 9-month FTC position. \n \n KEY RESPONSIBILITIES: \n \n\n • Provide first and second line support for IT in the respective project offices\n, • Provide first and second line support for IT in the respective project offices. This includes laptops/desktops, printers, AV and meeting room equipment, supporting MS Office and business applications and delivering images and upgrades. While the Desktop support engineer will primarily support Windows with a broad understanding of other IT technologies such as network and server infrastructure is required to in order troubleshoot complex problems and undertake routine maintenance activities supported by 3rd line.\n, • Work with businesses to understand and interpret their needs. Proactively identify areas of opportunity and offer advice/training to ensure maximum exploitation of approved IT technologies.\n, • Provide support for software and engineering applications including installation, licensing, troubleshooting support etc. This will require regular communication with application support experts in Sharjah /India.\n, • Work with the central Infrastructure, network, desktop and technical computing support teams in globally to ensure compliance with global support processes and technical guidelines (e.g. hardware specification and procurement, backup procedures, virus control, PC build, software installation and licensing, security administration etc). Maintain regular contact with the central global IT team.\n, • Deliver monitoring of servers, network, backup infra and report to central /vendor (for RMA) team for any alerts /failures etc.\n, • Maintain accurate and up to date documentation of the IT infrastructure, including PC, Printer, Network, Server, accessories inventory, third party contractual documentation (maintenance contracts, support contacts) etc.\n, • Support the Administration and maintenance of various productivity enhancement tools such as SharePoint and O365 and champion the fullest possible use of this technology.\n, • Administration of the various communication technologies in use, including maintaining use of wireless LAN, mobile devices and follow-me printing.\n, • Maintain professional working relationships with key third party suppliers.\n, • Display commercial awareness and ensure procedures and standards are adhered to when handling requests such as New Hardware, Peripherals and Procurement.\n, • Must display a strong customer focus and willingness to take ownership of problems.\n, • Must be self-motivated, able to act independently with minimum supervision, while remaining a strong team player in terms of adherence to common standards and process guidelines.\n\n \n ESSENTIAL QUALIFICATIONS AND SKILLS: \n \n\n • Ability to communicate effectively with business customers and IT colleagues up to senior level.\n, • Broad knowledge of office IT infrastructure/communications, including server and desktop hardware and software, and local/wide area networking technologies.\n, • Experience of having supported the full range of IT technologies in a similar sized organization.\n, • Experience of working with a ticket system, escalating and providing information for multiple IT teams and managing issues through to resolution.\n, • Basic level of knowledge (installation, license management, troubleshooting) supporting specialist technical and engineering applications.\n, • Preferably educated to degree level in an appropriate subject.\n, • Microsoft accreditation in the key technologies deployed within Petrofac (e.g. desktop operating systems, Microsoft Office).\n, • Minimum 5 years’ experience in similar capacity.\n, • Technical Skill – Demonstrable experience and expertise in the key technical areas (server/desktop infrastructure, LAN/WAN).\n, • Analytical Thinking – Able to identify and solve technical problems.\n, • Team Worker – Collaborates openly and willingly across teams and departments, in particular to ensure agreed global IT standards are maintained and adhered to.\n, • Communication – Able to communicate complex technical issues clearly and persuasively to peers and customers. Willing to continually engage customers when required. Open and honest communications with the Regional IT Manager.\n, • Initiative – Self motivation. Able to work independently and as part of a team. Willingness to take ownership of problems and manage through to a resolution.\n, • Language – Ability to communicate effectively in English.\n\n

United Offshore Support GmbH (UOS) is a leading global operator of sophisticated offshore support vessels specializing in the technical, crew and commercial management of high-powered anchor handling tug/supply (AHTS) vessels, large platform supply vessels (PSVs) and subsea vessels working in the offshore energy industry worldwide. Headquartered in Leer Germany, UOS has a growing office in Aberdeen and commercial management presence in London and Singapore. The on and offshore teams at UOS are highly experienced with a long track record of delivering safe and reliable operations to end clients in just about every offshore energy basin around the world. \n \n We are actively looking for a Master Mariner to join our company. \n \n Summary \n The Master Mariner is responsible for the safe, efficient, and compliant operation of the assigned vessel while maintaining the highest standards of safety, leadership, and operational excellence. As the Master, you will lead the onboard team, ensure compliance with international and company regulations, and work closely with the onshore management team to deliver exceptional service to our clients. \n With a growing fleet of 11 active Anchor Handling Tug Supply (AHTS) vessels, 7 active Platform Supply Vessels (PSVs), and 12 newbuild vessels joining our operations, this is an exciting opportunity to become part of a company focused on long-term growth and career development. \n \n Responsibilities \n\n • Ensure the safe navigation and overall command of the vessel in accordance with international regulations and company procedures.\n, • Promote and maintain a strong safety culture onboard through effective leadership and continuous improvement.\n, • Lead, mentor, and develop the onboard crew while fostering teamwork and professionalism.\n, • Ensure compliance with the Safety Management System (SMS), ISM Code, ISPS Code, MLC, and all applicable statutory requirements.\n, • Maintain effective communication with Vessel Managers, Operations, clients, and relevant authorities.\n, • Manage vessel operations to achieve the highest levels of safety, efficiency, and client satisfaction.\n, • Oversee emergency preparedness, drills, and onboard risk management.\n, • Ensure accurate reporting of vessel performance, incidents, maintenance requirements, and operational activities.\n, • Monitor fuel consumption and operational efficiency while maintaining cost awareness.\n, • Support dry dockings, inspections, audits, mobilizations, and new project requirements as required.\n, • Contribute to the successful integration and commissioning of newbuild vessels where applicable.\n\n \n Qualifications \n\n • Master Unlimited Certificate of Competency.\n, • Previous command experience on offshore vessels, preferably AHTS and/or PSV.\n, • Strong leadership, decision-making, and communication skills.\n, • Excellent understanding of offshore operations, DP operations, and marine legislation.\n, • Valid STCW certification and offshore medical certificates.\n, • Dynamic Positioning (DP Unlimited) certification preferred.\n, • Fluent in English, both written and spoken.\n, • Safety-focused with a proactive and solution-oriented mindset.\n\n \n Why UOS? \n\n • Modern offshore fleet with continued expansion.\n, • 12 newbuild vessels offering exciting future opportunities.\n, • Long-term career development and promotion opportunities.\n, • International offshore working environment.\n, • Strong safety culture with highly experienced teams.\n, • Opportunity to contribute to the future growth of a rapidly expanding offshore company.\n\n \n Ready to take command of your next challenge? We'd love to hear from you.

United Offshore Support GmbH (UOS) is a leading global operator of sophisticated offshore support vessels specializing in the technical, crew and commercial management of high-powered anchor handling tug/supply (AHTS) vessels, large platform supply vessels (PSVs) and subsea vessels working in the offshore energy industry worldwide. Headquartered in Leer Germany, UOS has a growing office in Aberdeen and commercial management presence in London and Singapore. The on and offshore teams at UOS are highly experienced with a long track record of delivering safe and reliable operations to end clients in just about every offshore energy basin around the world. \n \n We are actively looking for a Electro-Technical Officer (ETO) to join our company. \n \n Summary \n The Electro-Technical Officer (ETO) is responsible for maintaining and troubleshooting the vessel's electrical, electronic, automation, communication, and Dynamic Positioning systems. Working closely with the Chief Engineer and onboard management team, the ETO ensures that all electrical systems operate safely and reliably to support continuous offshore operations. \n With 11 active AHTS vessels, 7 active PSVs, and 12 newbuild vessels joining our fleet, this is an exciting opportunity to work with modern offshore technology while building a long-term career with UOS. \n \n Responsibilities \n\n • Maintain and repair all electrical, electronic, automation, navigation, communication, and DP systems onboard.\n, • Carry out planned maintenance in accordance with company procedures and manufacturers' recommendations.\n, • Diagnose and resolve electrical and automation faults to minimize vessel downtime.\n, • Support engine room operations by maintaining power generation and distribution systems.\n, • Ensure compliance with class, flag state, statutory, and company requirements.\n, • Maintain accurate maintenance records within the vessel's planned maintenance system.\n, • Assist during audits, inspections, dry dockings, and vessel mobilizations.\n, • Support commissioning activities on newbuild vessels where required.\n, • Liaise with shore management and equipment manufacturers regarding technical support.\n, • Promote safe working practices and actively participate in safety meetings and emergency drills.\n\n \n Qualifications \n\n • Electro-Technical Officer Certificate of Competency.\n, • Previous offshore experience on AHTS, PSV, or similar offshore vessels.\n, • Experience with Dynamic Positioning, automation, and marine electrical systems.\n, • Strong troubleshooting and fault-finding skills.\n, • Good understanding of planned maintenance systems.\n, • Valid STCW certification and offshore medical.\n, • Fluent in English.\n, • Self-motivated, proactive, and capable of working independently and within a team.\n\n \n Why UOS? \n\n • Opportunity to work with a modern and expanding offshore fleet.\n, • 12 newbuild vessels equipped with the latest technology.\n, • Long-term career progression and technical development.\n, • International offshore working environment.\n, • Strong commitment to safety and operational excellence.\n, • Opportunity to help shape the future of a growing offshore company.\n\n \n Ready to power the future of offshore operations? We'd love to hear from you.

Worldwide, energy asset owners choose CB&I Asset Solutions as their asset management partner, confident in our ability to deliver tailored, value driven asset management solutions. \n \n \n Our commitment is simple but powerful: to deliver value to our customers through safe, effective and efficient operations, maintenance, wells and decommissioning solutions, specialising in late life energy assets. \n \n \n We're committed to investing in our people, and to building exceptional teams who deliver. Our people are trusted by our customers to safely operate their energy assets, improve performance and extend asset life through innovative solutions. \n \n \n We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week. \n \n \n Think smarter. Move faster. Deliver value. \n \n \n JOB TITLE: POWER AND WATER AND UTILITIES TECHNICIAN. \n \n \n This post is based offshore on the Kittiwake Platform on a 3/4/3/5 rota. \n \n \n KEY RESPONSIBILITIES: \n \n\n • Operates and controls process and utilities facilities in a safe and efficient manner, thereby ensuring that the process plant and systems is optimized to meet environmental and production targets.\n, • Specialist background with experience in Power Generation & Distribution capable of being certified to SAEP level. Carry out adjustments to process facilities under the direction of the Shift Team Leader (STL) & ultimately the Operations Supervisor.\n, • Ensure all Operations equipment for life support and safety systems are maintained and available.\n, • Operate and Manage Power Generation and Distribution Systems.\n, • Act as SAEP or AEP Electrical Person as required in line with Maintenance Team.\n, • Work as part of a team for Power/Utilities systems in line with plans and targets\n, • Identify and report to the Control Room any plant/equipment malfunction. Implement adjustments under the direction of the Control Room with the goal of achieving safe and reliable production.\n, • Work as a key member of the team who are responsible for the safe operation of the plant.\n, • Implement shutdown, design & implement isolation, depressurizing and cleaning of equipment required for maintenance, purging and de-isolating ensuring all work permits have been cleared before bringing production back online.\n, • Carry out front line maintenance such as filter changes, pressure/temperature gauges replacement etc.\n, • Recover plant from any emergency shutdown and minimize loss of production, whilst adhering to operating procedures.\n, • Carry out lab duties, procedures and basic oil and gas analysis.\n, • Complete pre-start-up/operating checks, ensuring all interdependent systems are available. Complete post start-up/operating checks to ensure normal operating conditions.\n, • Carry out site visits and advise on risk assessment controls required for work in your assigned area. Act as counter signatory within permit system as assigned by STL. Take responsibility to monitor work parties in your area and ensure housekeeping standards are being maintained before, during and after work.\n, • Ensure appropriate data is collected, collated and reported in a timely manner and with a high degree of accuracy in support of production optimization and client quality expectations.\n, • Take responsibility for, and ownership of 28-Day / 7-day planning & maintenance activities within the discipline and as delegated by the STL.\n, • Work with discipline Techs to provide effective and efficient plant preparation and re-instatement following maintenance and to ensure only one outage will be required, encompassing all planned activities for the period.\n, • Ensure all documentation, daily logs and trip handovers are to a high standard and accurate.\n, • With the PMC, monitor materials movements on the materials tracker and manifest.\n, • ICP Focal point as tasked by the STL. Make sure verification testing is organized such that the resource and permitry is available at the agreed time.\n, • S/D & Projects Focal point for Operations Area as tasked by STL.\n, • In conjunction with other Operations personnel review any proposed modifications / work packs prior to implementation and feedback as appropriate.\n, • Actively support and liaise with all residential / non-residential contractors / vendors acting as central point of contact, ensuring work carried out by 3rd party personnel conforms to statutory regulations and company standards.\n, • Completion of Competence Management System for role in timely manner.\n, • Understand and comply with the installations safety case, statutory requirements, and safe systems of work.\n, • Ensure contractors and vendors comply with Petrofac / Kittiwake’s safe systems of work and current legislation.\n, • Perform in an emergency role as defined by the Company Emergency Response Procedure Manual and Station Bill.\n, • Ability to lead and work in a team, resolving day-to-day operational issues as they occur.\n, • Ability to manage system issues and liaise with external support teams to bring resolutions.\n, • Ability to manage multiple work scopes, prioritizing and allocating resources as required for the best outcome for the asset.\n, • Ability to review plans for SIMOPS issues and resolve clashes before they manifest at site.\n, • Ability to carry out complex fault-finding on-site equipment, liaising with vendors both remotely and locally to resolve issues.\n\n \n \n ESSENTIAL QUALIFICATIONS AND SKILLS: \n \n\n • Recognized Apprenticeship or Training Scheme, preferable in Electrical Discipline with subsequent multi-skilling in Operations.\n, • Demonstrable experience in Electrical Maintenance and Hydrocarbon Operations support activities, worked in a multi-skilled role.\n, • OND / ONC/ City and Guilds / NVQ Level 3 in suitable trade.\n, • All applicable electrical competence certification to enable work on LV and HV systems.\n, • ISSOW (Proscient Or similar system) training to level 2.\n, • SBT assembly and re-instatement to stage ¾\n, • Compex certification.\n, • Systems literate - experience of computerized management systems e.g., Maximo, Spreadsheets, etc.\n, • Good communication skills (written and verbal) with the ability to share information / knowledge with other personnel.\n\n

Job Title: \n HSE Intern \n \n About Us \n We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. We are facing the world’s greatest balancing act—how to simultaneously reduce emissions and meet the world’s growing energy demands. Our collective future depends on decarbonizing the fossil fuel industry while innovating a new energy landscape. It’s what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. \n More than 98,000 employees across 120 countries have already started their SLB journeys. Start yours now! \n If you would like to know more, please visit our website at https://www.slb.com/ \n \n Location \n Aberdeen \n \n Job Summary \n Join our dynamic and innovative team dedicated to ensuring a safe, healthy, and efficient working environment. As an HSE Intern, you will gain hands-on experience supporting Health, Safety & Environment and Facilities Management activities while contributing to a strong safety culture across the organization. This internship offers an excellent opportunity to develop practical HSE knowledge, support facility operations, and work collaboratively with cross-functional teams. \n \n Essential Responsibilities and Duties \n\n • Assist in the implementation of HSE policies, standards, and procedures.\n, • Support risk assessment reviews, workplace inspections, and safety audits to identify potential hazards and ensure compliance.\n, • Help maintain accurate and up-to-date HSE and facility-related records, documentation, and internal databases.\n, • Support updates and follow-up activities across Facilities systems and ensure required data is maintained accurately.\n, • Assist in scheduling and following up on facility maintenance, repairs, and service requests.\n, • Support on-site HSE and Facilities activities, including workplace inspections and safety engagements.\n, • Assist in small facility improvement projects, audits, and workplace initiatives.\n, • Support the implementation of workplace standards to ensure clean, safe, and well-organized facilities.\n, • Participate in HSE training sessions, toolbox talks, and awareness campaigns.\n, • Collaborate with different departments to promote the SLB Safe Culture.\n, • Interface with internal stakeholders and external suppliers to support day-to-day Facilities and HSE operations.\n, • Support documentation, reporting, and basic contract or permit administration under supervision.\n, • Follow up with suppliers and internal stakeholders on service requests and administrative processes, including payment approval workflows where applicable.\n, • Contribute to environmental sustainability initiatives within the company.\n, • Support incident investigations and assist in developing corrective and preventive actions.\n, • Demonstrate adaptability by supporting changing business priorities and learning new systems and processes.\n, • Occasionally visit other sites to support HSE or Facilities activities, where required.\n\n \n Learning Outcomes \n\n • Practical HSE Knowledge: Gain a comprehensive understanding of HSE principles, workplace safety practices, and regulatory requirements.\n, • Facilities Management Exposure: Develop an understanding of facility operations, maintenance coordination, and workplace management processes.\n, • Communication Skills: Build confidence communicating with cross-functional teams, suppliers, and internal stakeholders.\n, • Problem-Solving: Learn to identify hazards, assess risks, and contribute to effective corrective actions and workplace improvements.\n, • Project Management: Gain experience supporting HSE and Facilities projects from planning through implementation and reporting.\n, • Analytical Skills: Strengthen analytical thinking through inspections, audits, incident reviews, and data management.\n\n \n Essential Requirements \n\n • Recently completed a degree in Health & Safety, Environmental Science, Engineering, Facilities Management, or a related discipline.\n, • Previous experience or coursework related to HSE, Facilities, Engineering, or Operations (internships, university projects, etc.).\n, • Basic understanding of HSE principles and workplace safety practices.\n, • Strong organizational skills with the ability to manage multiple tasks and priorities.\n, • Strong communication and interpersonal skills.\n, • Attention to detail and a proactive approach to problem-solving.\n, • Ability to work independently as well as collaboratively within a team.\n, • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).\n\n \n Preferred Skills \n\n • NEBOSH certification (or currently studying towards it) is an advantage.\n, • Familiarity with UK HSE regulations and guidelines is preferred but not essential.\n, • Interest or exposure to Facilities Management or workplace operations is beneficial.\n\n \n BlueFlex Scheme \n We offer hybrid working with a combination of on-site and home working days to achieve the right work-life balance, together with dedicated time for volunteering and sustainability initiatives. \n \n SLB is an equal opportunity employer. Qualified applicants are considered without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable law. \n #SLB #BalancedPlanet #Decarbonisation #NetZero #JoinUsNow

United Offshore Support GmbH (UOS) is a leading global operator of sophisticated offshore support vessels specializing in the technical, crew and commercial management of high-powered anchor handling tug/supply (AHTS) vessels, large platform supply vessels (PSVs) and subsea vessels working in the offshore energy industry worldwide. Headquartered in Leer Germany, UOS has a growing office in Aberdeen and commercial management presence in London and Singapore. The on and offshore teams at UOS are highly experienced with a long track record of delivering safe and reliable operations to end clients in just about every offshore energy basin around the world. \n \n We are actively looking for a Technical Superintendent to join our Team! \n This is a hybrid role, offering a combination of remote and in-office work, based out of one of our office locations in either Leer, Germany or Aberdeen, UK. We will also consider candidates within Europe with availability to frequently visit our offices. \n \n The purpose of the Technical Superintendent role is to ensure that assigned vessels are maintained and operated safely, efficiently, and in full compliance with all applicable regulations and client expectations. This includes managing technical support, planning maintenance and repairs, and supporting the crew with operational needs. \n \n Responsibilities \n\n • Maintain the highest safety, environmental and operational standards across nominated vessels.\n, • Deliver optimal vessel performance and reliability with minimal downtime.\n, • Ensure that nominated vessels are managed and maintained in line with Class, Flag and Company requirements.\n, • Manage the vessel maintenance and repair programs including dry-dock planning.\n, • Maintain CMMS accuracy and ensure accuracy in reporting for assigned vessels.\n, • Ensure defective conditions are identified, monitored and closed out in a timely manner.\n, • Deliver technical support and root cause analysis for defects and breakdowns.\n, • Robust adherence to the Business Management System ensuring all assigned vessels are managed in line with the procedures detailed.\n, • Measures Chief Engineers overall performance in terms of KPI’s measured against maintenance system, planning for work in advance, maintaining of agreed spares stock levels, reporting of defects and maintenance done on board. Assesses and write annual assessments.\n, • Participates in the interviewing and selection of engine room candidates including 3rd, 2nd and Chief Engineers.\n, • Undertake the diligent technical management and be the technical focal point for assigned vessels.\n, • In conjunction with the Operational Excellence department, coordinate with Class and Flag to ensure survey and inspection are completed in line with required frequencies.\n, • Closure of audit findings and recommendations raised against assigned vessels.\n, • Ensure that the assigned vessels are maintained in accordance with the CMMS and that maintenance backlog is minimized.\n, • Undertake regular vessel visits to meet with the crews and undertake detailed technical and maintenance system audits, reporting on the condition of the vessel and compliance against the UOS standards. (A minimum of two visits per year with no more than seven months apart in any 12-month period is required)\n\n \n Qualifications \n\n • Degree in Marine Engineering, Naval Architecture, Nautical Science\n, • Chief Engineer license\n, • Seagoing experience in a senior technical position on offshore support vessels\n, • 3+ years of shore-based technical superintendent experience\n, • Availability to undertake international travel when required\n, • Strong knowledge of vessel systems, maintenance, and repair procedures\n, • Solid understanding of ISM, Class, and Flag requirements\n, • Experience in dry-dock planning and execution\n, • Strong organizational and budget management skills\n, • Proficiency with CMMS, reporting tools, and Microsoft Office\n, • Strong interpersonal and communication skills\n, • Ability to prioritize and manage time effectively in a fast-paced operational environment\n, • Excellent verbal and written communication skills in English. German is a great plus\n\n \n Our Commitment: \n\n • Flexible working hours and home office options\n, • A long-term perspective and career development opportunities\n, • Employee Benefits, e.g. welfare initiatives, team events, bike-leasing and others\n, • Working in an international team\n\n \n Ready for a new challenge in a dynamic, global environment? \n If so, you've come to the right place! \n Join us at UOS and be part of something exciting. \n \n *Please note that due to the high number of applications only candidates selected to participate on recruiting process next steps will be contacted.

Worldwide, energy asset owners choose CB&I Asset Solutions as their asset management partner, confident in our ability to deliver tailored, value driven asset management solutions. \n \n \n \n Our commitment is simple but powerful: to deliver value to our customers through safe, effective and efficient operations, maintenance, wells and decommissioning solutions, specialising in late life energy assets. \n \n \n \n \n We're committed to investing in our people, and to building exceptional teams who deliver. Our people are trusted by our customers to safely operate their energy assets, improve performance and extend asset life through innovative solutions. \n \n \n \n \n We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week. \n \n \n \n \n Think smarter. Move faster. Deliver value. \n \n \n \n \n JOB TITLE: INTERNATIONAL TAX ACCOUNTANT \n \n \n \n \n This position is a maternity cover on a fixed term contract of 8 months based in Aberdeen. \n \n \n \n \n KEY RESPONSIBILITIES: \n \n \n \n\n • Preparation of UAE corporate tax and VAT returns, ensuring consistent high-quality delivery and timely submissions.\n, • Collate/prepare data required to prepare various tax returns throughout African regions, eg. WHT and STR returns.\n, • Support the wider team in arranging payment of tax liabilities, throughout various territories, on a timely basis.\n, • Preparation of divisional tax reporting on TRCS and accounting and statutory accounts tax disclosures.\n, • Preparation of monthly balance sheet reconciliations.\n, • Adhere to Company Tax strategy and policy.\n, • Responsible for drafting tax policies and standards, as appropriate.\n, • Liaise with external advisors to ensure timely and accurate completion of returns.\n, • Oversight in other overseas territories, for example but not limited to, Thailand, Libya, India and Russia.\n, • Support Tax Team with ensuring compliance with global transfer pricing policies and supply requested information.\n, • Ensure VAT Control schedules are completed for all material overseas contracts.\n, • Keep the business up to date with developments in tax legislation and government initiatives.\n, • Liaison with tax advisors as appropriate.\n, • Act as central point of review and control for any systems changes impacting UAE and African taxes.\n, • Continuous review of processes to identify opportunities for improvements.\n, • Build relationships with operations, Commercial and HR to ensure they seek tax advice where required.\n\n

Worldwide, energy asset owners choose CB&I Asset Solutions as their asset management partner, confident in our ability to deliver tailored, value driven asset management solutions. \n \n \n \n \n Our commitment is simple but powerful: to deliver value to our customers through safe, effective and efficient operations, maintenance, wells and decommissioning solutions, specializing in late life energy assets. \n \n \n We're committed to investing in our people, and to building exceptional teams who deliver. Our people are trusted by our customers to safely operate their energy assets, improve performance and extend asset life through innovative solutions. \n \n \n We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week. \n \n \n Think smarter. Move faster. Deliver value. \n \n \n \n \n JOB TITLE: INTERNATIONAL TRAINING & COMPETENCE MANAGER \n \n \n \n \n KEY RESPONSIBILITIES: \n \n \n\n • To lead the development and implementation of international training and competence solutions that support market entry and business growth, including the development of workforce capability solutions that support local content ICV requirements and enable competitive market positioning.\n, • The role will ensure the business can credibly define, structure, and deliver in-country training and capability solutions that support bid activity, operational readiness, and workforce mobilization across multiple regions.\n, • The role carries clear commercial accountability, ensuring all training and competence solutions are operationally credible, financially viable, scalable, and capable of strengthening competitive position while supporting profitable international growth.\n, • The role will bridge business development, operational delivery, and external training providers, ensuring all capability solutions are practical, scalable, and regionally adaptable.\n, • Develop and implement an international training and competence approach aligned to business growth and international expansion.\n, • Define and drive approaches to local content / ICV requirements, ensuring workforce capability solutions support both regulatory compliance and competitive positioning in bids.\n, • Translate business and operational requirements into practical, scalable training and competence capability solutions.\n, • Lead the development of a flexible international competence framework, adaptable to regional requirements.\n, • Support bid development by ensuring solutions are credible, deliverable, and aligned to operational realities.\n, • Identify capability risks and gaps across new and existing regions and develop mitigation approaches.\n, • Ensure alignment between training, competence, and workforce mobilization requirements.\n, • Drive commercially focused capability solutions that support profitable growth, competitive differentiation, and operational delivery across international market.\n, • Drive consistency in capability standards while allowing for regional flexibility and adaptation.\n, • Identify and apply innovative and practical approaches, including digital solutions, to enhance training and competence delivery.\n, • Develop and articulate local content / ICV strategies within bids, ensuring they are credible, deliverable, and aligned to regional expectations.\n, • Ensure training and competence approaches align with client expectations, local content requirements, and operational needs.\n, • Contribute to building client confidence through clear, structured delivery models.\n, • Work with BD and regional teams to position local workforce development as a key differentiator in client proposals.\n, • Support continuous improvement based on client feedback and operational performance.\n, • Define and implement region specific training delivery models including:\n, • In-country delivery.\n, • Third party providers.\n, • Contractor–based solutions.\n, • Identify, engage and manage external training partners and providers.\n, • Ensure training and competence solutions directly support in-country workforce development and long-term localization goals.\n, • Adapt training approaches to reflect international and emerging market conditions.\n, • Incorporate blended and digital learning approaches to support scalable and flexible training delivery across regions.\n, • Ensure training solutions are cost effective, scalable, operationally and contractually aligned.\n, • Lead and support the existing training and competence team.\n, • Ensure effective implementation of competence frameworks across regions.\n, • Ensure alignment between: Competence standards, Training delivery and Workforce readiness.\n, • Provide guidance and oversight to ensure consistent and high-quality capability outcomes.\n, • Support the development of digitally enabled training and competence tracking and reporting to improve visibility across regions.\n, • Support development of the team to meet international and operational demands.\n, • Act as a key interface between: Business Development and Regional teams.\n, • Ensure alignment between: What is proposed in bids and What is delivered operationally.\n, • Capture lessons learned from: Bids, Training and competence delivery and Operational performance.\n, • Drive continuous improvement of: Training models, Competence frameworks and Delivery approaches.\n\n \n \n ESSENTIAL QUALIFICATIONS AND SKILLS: \n \n \n \n\n • Degree or equivalent experience in a relevant discipline (e.g. Operations, or Technical Training).\n, • Strong understanding of international competence management systems and frameworks.\n, • Knowledge of international training delivery models (in-house, third-party, contractor-based).\n, • Understanding of workforce capability development within Oil & Gas / Energy / environments.\n, • Awareness of international and emerging market requirements, including local content / nationalization expectations.\n, • Knowledge of health, safety, and operational standards relevant to technical training environments.\n, • Assessor and/or verifier qualifications are advantageous but not essential.\n, • Ability to translate operational requirements into practical training and competence capability solutions.\n, • Strong written skills, particularly for contributing to bids and proposals.\n, • Effective stakeholder management across: Business Development, Clients, Operations & External Providers.\n, • Ability to assess and select appropriate training delivery approaches.\n, • Commercial awareness — understanding how training and competence supports winning work and delivery.\n, • Strong organizational and coordination skills.\n, • Ability to work across multiple regions and priorities simultaneously.\n, • Adaptability to different cultural and operational environments.\n, • Experience in Oil & Gas, industries.\n, • Proven experience supporting or managing training or competence activities across multiple regions.\n, • Experience working with or managing external training providers or vendors.\n, • Exposure to bid or proposal processes, particularly contributing technical and local capability content.\n, • Experience working alongside operational teams to align training and competence with delivery requirements.\n, • Experience supporting workforce capability development or mobilization readiness.\n, • Experience developing and implementing adaptable competence frameworks across regions.\n, • Experience operating in or supporting international or emerging markets.\n\n

Worldwide, energy asset owners choose CB&I Asset Solutions as their asset management partner, confident in our ability to deliver tailored, value driven asset management solutions. \n \n \n Our commitment is simple but powerful: to deliver value to our customers through safe, effective and efficient operations, maintenance, wells and decommissioning solutions, specialising in late life energy assets. \n \n \n We're committed to investing in our people, and to building exceptional teams who deliver. Our people are trusted by our customers to safely operate their energy assets, improve performance and extend asset life through innovative solutions. \n \n \n We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week. \n \n \n Think smarter. Move faster. Deliver value. \n \n \n JOB TITLE: INSTRUMENT TECHNICIAN. \n \n The post is based offshore on the BP ETAP a 3/3 rotation. \n \n \n KEY RESPONSIBILITIES: \n \n \n\n • To work in an integrated maintenance team, responsible for planning and execution of instrument work scopes. All work to be carried out in a safe, timely and quality manner to maximise plant and equipment availability, maintain asset integrity and achieve business objectives.\n, • Ensure all work undertaken is safe, and in compliance and accordance with statutory Health and Safety procedures, maintenance manuals, specific work instructions, safe systems of work (Control of Work/Permit to Work) and all recommended safe working practices\n, • Actively participate in thorough pre-job risk assessments for all non-routine activities and confirm that they are accurately reflected in the resultant Permit to Work\n, • Actively participate in any pre-job site inspections/toolbox talks for maintenance activities.\n, • Participation in BOSS and carry out safety tours, as required.\n, • Ensure all required personal protective equipment (PPE) is appropriately used.\n, • Ensure all work party members, especially third-party personnel, fully understand the purpose of, and can use, required emergency response equipment.\n, • Ensure all personnel in proximity of works are fully aware of planned works, associated risks and control/mitigation measures in place.\n, • Ensure compliance with established clean workplace practices.\n, • Ensure all accidents, incidents, near misses and non-conformances are fully reported.\n, • Under direction, undertake routine inspection, servicing and adjustment of equipment.\n, • Under direction, support performance and condition monitoring and assessment.\n, • Review maintenance work orders and ensure all requirements/preparations are fully undertaken before commencement of works.\n, • Ensure any spares requirements are communicated to MDL in line with gate compliance timescales.\n, • Communicate with operations personnel for start-up and shutdown of relevant equipment.\n, • Undertake planned and corrective maintenance on mechanical equipment, ensuring any work carried out is in compliance with company procedures.\n, • Maintain safety critical equipment in accordance with regulations.\n, • Ensure equipment and systems are reinstated to required condition and performance.\n, • Support diagnostic activities and analysis to rectify faults.\n, • Report all work completed in CMMS (Backbone).\n, • Respond to ‘out of hours’ call-outs, as requested.\n, • Provide input on any modifications made to equipment or systems for reporting to onshore discipline engineer to update ‘as-built’ drawing status.\n, • Responsible for management and completion of competency prolife (CPP).\n\n \n \n ESSENTIAL QUALIFICATIONS AND SKILLS: \n \n\n • Recognised trade qualification.\n, • Appropriate vocational qualifications or certification in instrument maintenance.\n, • IRATA Level 1 Rope Access certification (or willing to complete if required by the platform).\n, • SBT01 – Assemble and install Small Bore Tubing training or willing to complete.\n, • SBex-Parker A Lok training or willing to complete.\n, • Previous experience in the oil and gas/petrochemical industry in a similar or equivalent role.\n, • Experience and competence with site specific instrument biased electrical competence (CIP).\n, • electrical equipment in hazardous areas (CompEx).\n, • Ex protection maintenance and inspection.\n, • authorised safeguarding systems testing.\n, • control valve & ESD valve maintenance and inspection.\n, • ESD system maintenance.\n, • basic process control systems (DCS) maintenance.\n, • control system cabling calibration.\n, • final control elements calibration and verification.\n, • PLC systems knowledge.\n, • instrument control/calibration.\n, • installation and assembly of small bore tubing.\n, • equipment installation/de-commissioning.\n, • Good awareness of work planning and scheduling.\n, • Familiarity of CMMS – Maximo or equivalent work management system.\n, • Good understanding of electrical safety rules and regulations.\n, • Good understanding and comfortable with the use of P&IDs.\n, • Performing Authority (Permit to Work system).\n, • Previous Isolating Authority experience.\n, • Gas Tester.\n, • First Aid training (including CPR).\n, • Good awareness of safe Working At Height practices\n, • In the event of an emergency, carry out duties as identified in the emergency response procedure or as directed by OIM. Personnel are required to undertake any training associated with these roles.\n, • Respected, contributory team member able to establish rapport with others.\n, • Good communicator, accurately relates information, uses active listening to ensure own understanding and is comfortable with written, spoken or electronic media.\n, • Actively demonstrates commitment to higher performance standards.\n, • Understands own roles and importance of working to objectives and standards.\n, • Understands team goals and priorities, appreciates cost implications of own actions.\n, • Understands the importance of compliance and impact of non-conformance.\n, • Has good problem solving skills, corrective action planning and follow-up.\n, • Offshore Survival (BOSIET/FOET).\n, • Offshore Medical (OGUK).\n, • Additional medical certification as required by IRATA.\n, • MIST.\n, • CompEx.\n, • Further mandatory training requirements, as per agreed training matrix.\n\n

United Offshore Support GmbH (UOS) is a leading global operator of sophisticated offshore support vessels specializing in the technical, crew and commercial management of high-powered anchor handling tug/supply (AHTS) vessels, large platform supply vessels (PSVs) and subsea vessels working in the offshore energy industry worldwide. Headquartered in Leer Germany, UOS has a growing office in Aberdeen and commercial management presence in London and Singapore. The on and offshore teams at UOS are highly experienced with a long track record of delivering safe and reliable operations to end clients in just about every offshore energy basin around the world. \n \n We are actively looking for a Chief Officer to join our company. \n \n Summary \n The Chief Officer supports the Master/Captain in the safe and efficient operation of the vessel while taking responsibility for cargo operations, deck maintenance, safety management, and leadership of the deck department. The role is essential in ensuring safe offshore operations and maintaining the highest operational standards. \n \n As our fleet continues to grow with 11 active AHTS vessels, 7 active PSVs, and 12 newbuild vessels under construction, we are looking for experienced maritime professionals who want to grow together with us. \n \n Responsibilities \n\n • Assist the Master/Captain in the day-to-day management and safe operation of the vessel.\n, • Plan, supervise, and execute cargo and offshore operations safely and efficiently.\n, • Lead and supervise the deck crew while promoting teamwork and professional development.\n, • Ensure compliance with company procedures, SMS, and international regulations.\n, • Maintain deck equipment, lifesaving appliances, firefighting equipment, and safety systems.\n, • Conduct risk assessments, toolbox talks, drills, and safety meetings.\n, • Monitor vessel stability, cargo planning, and ballast operations.\n, • Coordinate planned maintenance activities for deck machinery and equipment.\n, • Support audits, inspections, client visits, and port state control inspections.\n, • Maintain accurate operational records and reports.\n, • Assist with mobilizations, vessel upgrades, and newbuild commissioning when required.\n\n \n Qualifications \n\n • Chief Mate Unlimited Certificate of Competency.\n, • DP Unlimited Certificate preferred.\n, • Previous experience onboard offshore vessels (AHTS and/or PSV).\n, • Strong leadership and organizational skills.\n, • Excellent understanding of offshore cargo operations and marine safety.\n, • Valid STCW certificates and offshore medical.\n, • Fluent in English.\n, • Ability to perform effectively in a dynamic offshore environment.\n\n \n Why UOS? \n\n • Modern offshore fleet with exciting projects.\n, • 12 newbuild vessels creating future career opportunities.\n, • Professional and supportive working environment.\n, • Strong focus on safety, teamwork, and development.\n, • Long-term employment within a growing international company.\n, • Opportunity to progress towards future command positions.\n\n \n Ready for your next offshore challenge? We'd love to hear from you.

Applicants must already have the unrestricted right to work in the UK. We are unable to provide visa support for this role. \n \n 3t is currently looking to recruit a Product Manager on a permanent contract in Dyce, Aberdeen. \n \n Salary and Benefits Package \n\n • £50,000.00 - £60,000.00 per annum\n, • Holiday entitlement of 29 days plus 4 official public holidays (1st, 2nd January and 25th, 26th December)\n, • HSF Health Plan and Perkbox\n, • Cycle to Work Scheme\n, • Pension contributions 5% (Employee) & 5% (Employer)\n\n \n This role is contracted at 37.5 hours per week. We operate a flexible hour’s scheme, whereby you can start work between the hours of 8.00am and 10.00am and finish work between the hours of 4.00pm and 6.00pm, Monday to Friday. \n \n The Role \n Role Purpose: \n This role acts as the bridge between customers, stakeholders and delivery teams, leading the discovery, development and continuous improvement of 3t Digital's products, ensuring they deliver measurable value to customers and support the company's strategic growth objectives. This role is based at 3t’s Dyce Training Centre however, travel to other 3t locations and client offices is also required. \n \n Key Responsibilities \n Roadmap Development and Data Strategy \n\n • Contribute to the development and maintenance of a detailed product roadmap for 3t Digital’s product suite based on market trends, customer needs, and business priorities.\n, • Meet regularly with customers and platform stakeholders to gather and analyse feedback to refine the product roadmap.\n, • Use internal analytics to drive decisions on feature enhancements and roadmap priorities.\n, • Work with engineering to ensure accurate documentation collection, storage, and retrieval for knowledge-sharing purposes.\n, • Explore opportunities for AI-driven innovation, efficiencies and insights.\n\n \n Feature Definition & Prioritisation \n\n • Collaborate with stakeholders to define and prioritise features and enhancements.\n, • Write and refine user stories, acceptance criteria, and use cases to ensure clear requirements for the development team.\n, • Maintain a prioritised backlog and make decisions on trade-offs to maximise the impact of each release.\n, • Explore and adopt new ways of working as 3t Digital’s progression of AI tools advances.\n\n \n Collaboration & Communication \n\n • Act as the main point of contact and platform subject matter expert for internal and external stakeholders using or evaluating the 3tx platform.\n, • Act as the key intermediary between 3t Digital’s wider internal and external stakeholders and the development teams you work with.\n, • Act as 3t Digital’s lead representative in sales meetings and other client engagement sessions, demonstrating the capabilities of the 3tx platform and answering ad-hoc questions.\n, • These sessions are primarily hosted be in-person. Deeply understand customer needs and advocate for their perspective throughout the development process.\n, • Work closely with engineering, UX, and QA teams to ensure timely delivery of high quality features.\n\n \n Agile Development Process \n\n • Participate in Agile ceremonies, including sprint planning, daily stand-ups, and retros.\n, • Track progress and report on key metrics to stakeholders, keeping them informed of product updates and delivery timelines.\n\n \n Market & Competitive Analysis \n\n • Stay informed of industry trends, competitor products, and emerging technologies to identify new opportunities and keep the product competitive.\n, • Participate in research and analysis to support product positioning, pricing, and feature prioritisation.\n\n \n The Person \n At 3t our values of Innovation, Collaboration and Excellence are at the heart of what we do. The successful candidate will have: \n \n Essential Criteria: \n\n • Bachelor’s degree in Business, Computer Science, Information Systems or a related field, or equivalent experience in product management, technology, data or SaaS delivery.\n, • Solid understanding of Agile methodologies and experience working with cross functional teams.\n, • Excellent communication skills, with the ability to translate complex technical concepts into customer-focused requirements.\n, • Proven ability to manage multiple projects and priorities in a fast-paced environment.\n, • Strong analytical skills with a data-driven approach to decision-making.\n, • Experience using Power BI or other analytics tools.\n, • Passion for building products that solve real customer problems and drive business value.\n\n \n Desirable Criteria: \n\n • 2+ years of experience as a Product Manager or similar role in a B2B SaaS environment.\n, • Experience in the broader energy sector and/or in a business focused on training or compliance.\n, • Working experience of LLM tools, e.g. Copilot, Claude or similar.\n, • Familiarity with product management tools like Jira, Confluence, Miro, Retool, or similar.\n\n \n The Company \n At 3t, we are passionate about up-skilling and empowering workforces to ensure a prosperous future where all workers, organisations and our industries thrive. \n 3t is the combination of world-leading companies that are together transforming training in the energy, and wider safety-critical sectors, combining cutting-edge immersive technology with award-winning high-impact workforce training. We stand as a global training powerhouse operating across 60 countries worldwide. \n Together, we are training the workforce of the future. \n 3t Digital is dedicated to transforming training with our award-winning software and immersive technologies to create engaging, memorable learning experiences for your workforce.

United Offshore Support GmbH (UOS) is a leading global operator of sophisticated offshore support vessels specializing in the technical, crew and commercial management of high-powered anchor handling tug/supply (AHTS) vessels, large platform supply vessels (PSVs) and subsea vessels working in the offshore energy industry worldwide. Headquartered in Leer Germany, UOS has a growing office in Aberdeen and commercial management presence in London and Singapore. The on and offshore teams at UOS are highly experienced with a long track record of delivering safe and reliable operations to end clients in just about every offshore energy basin around the world. \n \n We are actively looking for a General Manager Fleet. This is a hybrid role, offering a combination of remote and in-office work, based out of one of our office locations in either Leer, Germany or Aberdeen, UK. \n \n The General Manager Fleet is responsible for delivering a first-class service to our clients by overseeing the safe, compliant and efficient technical and operational performance of the assigned fleet of vessels, in line with charter party obligations and company standards. \n This is a leadership role within UOS and the holder has the authority and support to make the changes necessary with the vessel management teams to create an environment for success. \n \n Responsibilities: \n\n • Maintain the highest safety, environmental and operational standards across the fleet.\n, • Holistic management of the assigned fleet ensuring performance and revenue from each of the vessels is maximised.\n, • Deliver optimal fleet performance with minimal downtime.\n, • Demonstrates active safety leadership promoting safe operations across the fleet and the wider business.\n, • Operational, cost, management and technical efficiencies across the fleet, as well as with other fleets under management, to be maximised.\n, • Leadership and direction of the Technical Superintendents.\n, • Collaborate and coordinate with all departments and support functions to ensure vessels are adequately supported.\n, • Responsible and accountable for the financial performance against budget of the assigned vessels.\n, • Maintain a high level of effective communication and engagement inter-departmentally, across the wider business and across the entire fleet.\n, • Responsible for the detailed financial management of assigned vessels ensuring the development of accurate OPEX and CAPEX budgets in line with agreed schedules and regular accurate forecasting against the same.\n, • Monitor the vessel KPIs and performance data, drive accountability for continuous improvement.\n, • Ensure and verify that audit and inspection findings and defects are closed out in a timely manner so as not to impact on service delivery and vessel performance.\n, • Undertake proactive strategic planning in conjunction with the Chartering department to ensure maintenance requirements are completed with minimal commercial disruption.\n, • Represent UOS internally and externally, developing and maintaining beneficial relationships within internal and external customers, customer, suppliers and government agencies.\n, • Act as ERTL and participate in drills and scenarios as required.\n\n \n Qualifications: \n\n • Degree in Marine Engineering, Naval Architecture, Nautical Science, MBA.\n, • Seagoing experience in a senior position on offshore support vessels.\n, • Extensive and demonstrable shore based technical / fleet management experience.\n, • Excellent financial management stills and proven ability to manage budgets.\n, • In depth knowledge of maritime regulatory frameworks.\n, • Culturally aware and experience of working and supporting operations in different global regions.\n, • Strong leadership, management and interpersonal skills with experience in managing a diverse team.\n, • Ability to prioritise and manage time effectively in a fast-paced operational environment.\n, • Fluent in English. German is a big plus.\n\n \n Why UOS? \n\n • International offshore environment\n, • Flexible working hours and working from home options\n, • High level of responsibility and ownership\n, • Opportunity to shape and improve processes\n, • Growing business with long-term career opportunities\n\n \n Ready to make an impact? We’d love to hear from you. \n \n *Please note that due to the high volume of applications, only shortlisted candidates will be contacted for the next steps of the recruitment process.

Worldwide, energy asset owners choose CB&I Asset Solutions as their asset management partner, confident in our ability to deliver tailored, value driven asset management solutions. \n \n \n Our commitment is simple but powerful: to deliver value to our customers through safe, effective and efficient operations, maintenance, wells and decommissioning solutions, specialising in late life energy assets. \n \n \n We're committed to investing in our people, and to building exceptional teams who deliver. Our people are trusted by our customers to safely operate their energy assets, improve performance and extend asset life through innovative solutions. \n \n \n We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week. \n \n \n Think smarter. Move faster. Deliver value. \n \n \n JOB TITLE: PRESSURE SYSTEMS TECHNICAL AUTHORITY \n \n \n KEY RESPONSIBILITIES: \n \n \n\n • The TA is responsible for developing and maintaining all relevant discipline engineering strategies, policies and procedures necessary to ensure regulatory compliance, safe and efficient operation of operated assets, supported assets and contracts.\n, • Identifying discipline specific SECE’s during safety case development, developing and maintaining the performance standards. Authorizing the resulting SECE assurance routines in the maintenance system.\n, • Assessing and authorizing of the deferral of SECE assurance activities and planned maintenance activities in the maintenance system.\n, • When SECE’s fail to achieve the performance standard requirements, providing advice on how to close the risk gap, with mitigations, to an acceptable level. Endorsing the asset ORA’s and contributing to the asset cumulative risk assessment.\n, • Endorsing SECE suitability & reliability reviews, recommendations for remediation of degraded equipment, reviewing Verifier comments and recommendations.\n, • Approving operational changes and modifications via the Management of Change.\n, • Undertake site visits to establish and maintain familiarity with the assets and site management personnel. Undertake MAH audit/review on site as required.\n, • Support UK verification remedial actions (RAR etc) and marine class actions (CoC etc) as necessary.\n, • Support incident investigations and root cause analysis as necessary.\n, • Role Specific Responsibilities: Review and approve high risk anomalies, fitness for service engineering assessments and temporary repairs as required.\n, • The above is an outline of key duties and accountabilities, rather than an exclusive or exhaustive list of responsibilities. The post holder is expected to undertake any tasks which may reasonably be expected within the scope of the position.\n, • The postholder is expected to adhere to the rules of safety in and the Values.\n\n \n \n ESSENTIAL QUALIFICATIONS AND SKILLS: \n \n \n\n • Chartered Engineer, CEng, with relevant oil and gas or chemical industries experience.\n, • Relevant engineering degree or equivalent experience in oil and gas or chemical industries experience.\n, • Extensive knowledge of regulatory requirements, design codes and guidance.\n, • Offshore medical and associated certification required to go offshore.\n, • Understanding of risk-based integrity processes and databases, including AIMS, PSIMS, management, temporary repairs and fitness for service techniques.\n, • Detailed knowledge of inspection techniques and damage mechanisms.\n, • Appropriate level of HSE experience built up through oil & gas industry/ offshore exposure.\n, • Good behavioral and communicational skills for dealing with customers and a diverse workforce.\n, • Sound technical discipline knowledge.\n, • Ability to work in team in a problem-solving environment.\n, • Ability to take the initiative and work unsupervised to meet schedules and quality objectives.\n\n

JOB TITLE: Equipment Installation Coordinator \n LOCATION: Aberdeen \n JOB TYPE: Full-Time, Permanent \n \n Role Overview \n \n TEXO Recruitment is supporting our client in the search for an Equipment Installation Coordinator to join their global installation and commissioning team. Based in Aberdeen, this role supports the planning, removal, and installation of specialist offshore equipment and involves regular offshore assignments and international shipyard project work. \n \n This position combines hands-on technical involvement with site leadership responsibility. You will oversee multi-discipline installation teams across mechanical, electrical, hydraulic, and pneumatic scopes, ensuring work is delivered safely, efficiently, and in line with project specifications and client procedures. The role requires strong technical understanding, on-site coordination skills, and disciplined reporting. \n \n \n Key Responsibilities: \n \n Site Leadership & Supervision \n\n • Lead and coordinate on-site installation activities while remaining hands-on where required\n, • Supervise multi-discipline project teams during installation and removal scopes\n, • Ensure all work is carried out under approved safe systems of work and permit controls\n, • Enforce compliance with client procedures, safety standards, and project requirements\n\n \n Technical & Installation Duties \n Apply practical knowledge of piping systems, valves, hoses, fittings, and thread types during installation work \n\n • Prepare and verify Bills of Materials (BOMs) for installation scopes\n, • Interpret installation drawings, wiring diagrams, and hydraulic/pneumatic schematics\n, • Carry out site surveys and produce structured survey reports\n, • Capture as-built information and produce redline mark-ups for engineering updates\n, • Install and commission mechanical and electrical systems on specialist offshore equipment\n, • Diagnose and resolve issues across mechanical, electrical, hydraulic, and pneumatic systems during build and commissioning phases\n\n \n Reporting & Documentation \n\n • Produce daily site reports covering completed work and short-term lookahead activities\n, • Record personnel time and hired equipment usage\n, • Update project schedules and progress trackers, including percentage completion and forecast dates\n, • Capture lessons learned and contribute to post-project reports\n\n \n Travel Requirements \n Regular travel to Aberdeen facilities as required \n Frequent UK and international travel, including offshore and shipyard locations \n \n Education & Experience \n\n • Technical qualification such as HNC, technical diploma, or trade certification\n, • Minimum 7 years’ experience in installation, commissioning, fabrication, or maintenance roles involving industrial equipment\n, • Demonstrated experience supervising site-based installation activities\n\n \n Core Skills & Competencies \n\n • Good working knowledge of multi-discipline installation practices\n, • Strong safety awareness and permit-to-work discipline\n, • Proficient with Microsoft Office tools\n, • Clear written and verbal communication skills\n, • Ability to test and verify industrial equipment performance\n, • Organised approach to site reporting and documentation\n\n \n Desirable Experience / Certification \n\n • Offshore survival certification (e.g., BOSIET / HUET) or willingness to obtain\n, • Rigging and lifting experience\n, • Forklift truck licence\n, • Experience using project scheduling tools (e.g., Microsoft Project)\n, • Exposure to 3D scanning or digital site survey technology\n\n \n To apply, please contact Emma Savoldelli at TEXO Recruitment on 01224 446789 or email your CV to emma.savoldelli@texorecruitment.co.uk

Rope Access QAQC Inspector (Coatings, Insulation & PFP) – Offshore North Sea £43.50 per Hour LTD | £150 Mobilisation Fee | 3-Week Contract | Immediate Start Morson are recruiting for an experienced Rope Access QAQC Inspector to join an offshore project on the Nelson Platform .This is an excellent opportunity to work on a high-profile North Sea asset, providing quality assurance and quality control support across coatings, insulation and passive fire protection activities.What's on Offer? £43.50 per hour LTD£150 mobilisation fee3-week offshore assignmentMobilisation date: 13 July 2026Opportunity to work with a leading industrial services provider in the offshore energy sectorThe Role As a Rope Access QAQC Inspector, you will be responsible for ensuring all coatings, insulation and passive fire protection (PFP) works are completed in accordance with project specifications, industry standards and client requirements.You will carry out inspections, monitor quality standards, identify non-conformances and produce accurate quality documentation, while promoting a strong safety and quality culture onboard.Key Responsibilities Conduct QAQC inspections of coatings, insulation and PFP activitiesVerify work is completed in accordance with project specifications and proceduresMonitor workmanship and identify quality issues or non-conformancesProduce inspection reports and maintain accurate recordsLiaise with offshore management and client representatives regarding quality mattersParticipate in audits, inspections and quality meetingsEnsure compliance with all Health, Safety and Environmental requirementsEssential Requirements Previous experience in a QAQC Inspector role within the offshore oil and gas industryStrong knowledge of coatings, insulation and passive fire protection systemsCurrent IRATA Rope Access certificationExperience interpreting specifications, drawings and inspection proceduresExcellent communication and report writing skillsStrong attention to detail and commitment to quality standardsDesirable Qualifications NACE, ICorr or equivalent coating inspection qualificationPrevious PFP inspection experience, including knowledge of Chartek systemsInsulation inspection experienceExperience working on offshore maintenance and integrity projectsApply Today If you are an experienced Rope Access QAQC Inspector and are available to mobilise on 13 July 2026 , we would like to hear from you.TPBN1_UKTJ

Electrical TesterFarnborough£55,000We're working with a client who are looking to add four Electrical Testers to their team in Farnborough. This is an exciting opportunity to work within a close-knit team and be able to work in a critical environment.Please note, this position is working on a Day shift pattern (7am - 7pm, continental pattern and will also require travelling to another site one/two times per month.Electrical Testers Main Duties:Conduct site inductions and issue relevant PTW, ATW, LOA, and dynamic risk assessments.Carry out escort duties for all subcontractors on site.Respond promptly to reactive maintenance and installation works.Attend emergency reactive works, breakdowns, and remedial tasks as required.Perform fault-finding activities and carry out necessary plant adjustments.Record meter readings, monitor energy consumption, and identify opportunities for proactive energy savings.Complete planned preventative maintenance (PPM) tasks in accordance with contract specifications.Utilise Manager+ and MCIM systems to close out PPM tasks and maintain accurate asset data records.Conduct monthly generator testing on a rotational basis with the Second Day Technician.Carry out weekly fire alarm testing in accordance with site requirements.Ensure full compliance with company policies and procedures.Learn, understand, and effectively use our clients' SDSK system to ensure all reactive tickets are updated and closed within agreed SLA timeframes.Maintain and update site logbooks where applicable.Monitor building fabric conditions, report issues promptly, and ensure actions are completed in line with SLA requirements.Electrical testers Requirments: Minimum of 3 years experince in carrying out Electrical testing in a commercial environmentCity and Guilds / EAL / NVQ or equivalent in Electrical Installations / Engineering (Level 3 and regulations)Desirable - hold the Test & Inspection (2391 or 2394 & 2395) QualificationSalary and Package:£55,000 per annumContinental Shift Pattern ( Days only)25 days annual leave + Bank holidaysCompany pension schemeInternal progressionOvertime availableAdditional trainingTPBN1_UKTJ

Job descriptionSenior Vehicle Technician (Mechanic) - BMW Farnborough£60,000 OTE (uncapped earnings)Experienced Technicians are eligible for welcome bonuses totalling £2,500*Time to switch up a gear? Be part of something better.Enjoy support that's second to none as a Vehicle Technician (Mechanic) at Group 1 Automotive. With training at some of the best facilities in the industry, you'll learn new skills while becoming an expert. And best of all, you'll be part of a fun, friendly team that will support you every day.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Perform high-quality vehicle maintenance and repairs, following manufacturer standards and guidelines to ensure reliability and safetyConduct thorough inspections of vehicle components to assess wear, damage, or required replacementsProvide expert technical advice to customers when necessary, ensuring clear and professional communicationMaintain exceptional customer service standards, fostering trust that leads to repeat business and referralsCollaborate effectively with the service reception team and workshop control for seamless workflow and customer satisfactionOffer support and guidance to fellow Technicians in the workshop, promoting teamwork and knowledge sharingHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. NVQ Level 3 in Light Vehicle Maintenance & Repair or equivalent qualificationExperienced Level 2 qualified technicians with a dealership background are encouraged to applyThorough understanding of vehicle safety standards and guidelinesStrong problem-solving skills, ensuring accuracy in all aspects of workProven ability to meet efficiency targets while maintaining a keen eye for detailAbility to collaborate and contribute positively within a team environmentA current valid MOT licence is advantageous but not essentialMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.*Terms & Conditions; Welcome bonus is available to Level 3 qualified technicians. You will receive £1,000 sign-on bonus payable after 30 days of employment, a further £500 after 90 days, and a final payment of £1000 after 6 months. Further T&C's apply.TPBN1_UKTJ

Job descriptionCommercial Vehicle Technician (Mechanic) - Ford Farnborough£60,000 OTE (uncapped earnings)New Technicians are eligible for welcome bonuses totalling £2,500Time to switch up a gear? Be part of something better.Enjoy support that's second to none as a Commercial Vehicle Technician (Mechanic) at Group 1 Automotive. With training at some of the best facilities in the industry, you'll learn new skills while becoming an expert. And best of all, you'll be part of a fun, friendly team that will support you every day.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Perform high-quality vehicle maintenance and repairs, following manufacturer standards and guidelines to ensure reliability and safetyConduct thorough inspections of vehicle components to assess wear, damage, or required replacementsProvide expert technical advice to customers when necessary, ensuring clear and professional communicationMaintain exceptional customer service standards, fostering trust that leads to repeat business and referralsCollaborate effectively with the service reception team and workshop control for seamless workflow and customer satisfactionOffer support and guidance to fellow Technicians in the workshop, promoting teamwork and knowledge sharingHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. NVQ Level 3 in Light Vehicle Maintenance & Repair or equivalent qualificationThorough understanding of vehicle safety standards and guidelinesStrong problem-solving skills, ensuring accuracy in all aspects of workProven ability to meet efficiency targets while maintaining a keen eye for detailAbility to collaborate and contribute positively within a team environmentA current valid MOT licence is advantageous but not essentialMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.Terms & Conditions; £1,000 sign-on bonus payable after 30 days of employment, a further £500 after 90 days, and a final payment of £1000 after 6 months. Further T&C's apply.TPBN1_UKTJ

We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team.This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different.As a Workshop Service Engineer for Nationwide Platforms you will work within a busy depot to inspect, repair and maintain our machines ensuring that they are ready for use by our customers. Our machines are powered access machines such as booms and scissor lifts but don't worry full training will be given. So, providing you have a great attitude and are willing to learn plus have some mechanical/ electrical engineering experience behind you then this could be the role for you.In reward we can offer you a competitive salary, life assurance x2 contractual salary, Westfield health care plan, 25 days holiday and a pension. Working hours are Monday - Friday 8am - 5.30pm.Responsibilities include: -Support the Senior Service Engineer in the effective running of the Depot workshop within the region.Carry out pre-delivery inspections (PDI) of machines at client premises and at depot as required, and in conformance with manufacturer's specification, company policy and the regulations affecting the use. Ensure that there is no deficiency or defect likely to affect the safe working of a machine. Notify appropriate manager of any defective or unsafe equipment.Repair machines at depot or on site as required to ensure conformance with manufactures specification and company policy.To complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard.Handover machines to customers and familiarise customers with safe machine operation in accordance with company procedures.Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to depot staff as required.Accurately complete all relevant paperwork including engineer's report, off hire, pre/delivery inspection and service sheets.Update system on machine status change i.e. PDI carried out, Machine under repair, 6 monthly statutory Inspection completed.About you: -Relevant general engineering maintenance qualification, preferably to NVQ level 3 or equivalent.Experience in diesel engineering, auto electrics, hydraulics and diagnostics fault finding.Have a mature outlook and the ability to prioritise tasks and work well under pressure.Understand the importance of excellent customer service.Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need.At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON™, a range of pioneering Material Handling Attachments (MHAs), and the SkySentry™ control and monitoring system.At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environmentTPBN1_UKTJ

\n Cammach is currently recruiting an experienced Forklift Driver for our Aberdeen-based client, a global energy services company. The position is offered on a staff permanent basis. \n ROLE \n To load and unload containers/tanks from incoming/outgoing transport and to move containers/tanks around the yard as required. Contribute to maintaining business system integrity by booking units in/out of site and each location. In addition, carry out general work around the site as requested in line with training provided. \n RESPONSIBILITIES \n \n • To load and unload containers/tanks from transport in a safe and responsible manner in accordance with Forklift Code of Practice at all times.\n, • Using electronic platform record units being receipted/despatched on site as well as ensure that units being relocated on site are transacted to ensure system accuracy and integrity.\n, • To carry out general work around the site as required including housekeeping and container maintenance.\n, • The safe use and maintenance of the forklift truck and other company equipment in line with Forklift Code of Practice\n, • The safety of others on site, especially those in the vicinity of forklift truck movements.\n, • The jobholder will work closely with the Yard Lead to co-ordinate the movement and loading/unloading of containers.\n, • The jobholder will also work with the other forklift drivers in order to coordinate truck movements in a safe and efficient manner.\n \n REQUIREMENTS \n \n • Must have previous experience in a similar role.\n, • B2 Counterbalance Forklift License.\n, • Good communication skills.\n, • Excellent organisational skills.\n \n

Job Description:Overview of Business Area / Job Description:The DXC (Ent Serv UK Limited), AMPA Programme is responsible for the continued delivery and future growth of the Advanced Mission Planning Aid (AMPA) and associated products.Used widely within the RAF and various foreign Air Forces, AMPA is built around a common software core, with tailoring and additional capability being implemented for specific aircraft types.Applicants should be cleared to a minimum of SC and be a UK national with no caveats or dual nationality.Vacancy for an AMPA Project; System Administrator.Experienced System Administrator required for an office-based role supporting the AMPA programme and specifically fulfilling contractual requirements.A Systems Engineer undertaking the System Administration role provides computing facilities to the delivery team and maintains those facilities to meet AMPA project needs. They are responsible for providing a Project Support Environment that meets the specification defined by the Design Office.Reports to;Systems Team Lead / Service Delivery Manager;Accountable to the STL/SDM for the execution of System Administration activities in accordance with AMPA processes within the constraints of time, cost and quality.Responsibilities;The System Engineer (System Administration) is responsible for:Working with the STL to ensure that the facilities required to enable the AMPA team to deliver contracted support and change requirements are available and maintaining these facilities to ensure availability as required by the project team.Providing access to the Project Support Environment to meet the requirements of AMPA.Providing internal system help desk support to AMPA staff.Producing and maintaining a schedule of work associated with the administration and maintenance of the facilities.Undertaking System Administration tasks identified within the System Team Backlog in accordance with the policies and procedures detailed in the Air QMS (Quality Management System).Monitoring and reporting on environment performance.Manage the environment in order to maintain its performance and availability.Ensuring that all data held on the system is backed up and can be restored in the event of any data loss. Work within the boundaries of the AMPA Quality Management System (QMS) and the procedures defined within it i.e.; Starters & Leavers process.Internal equipment moves.Providing Licencing support as required: Obtain Licence quotes for software used on the account.Some weekend working will be required for regular software patching.May be required to be on call (rare occurrences).Essential Skills / ExperienceMust be cleared to a minimum of SC.Conversant with Active DirectoryConversant with Microsoft Server suites and Red Hat Enterprise Linux operating systems.Software updated via WSUS.VMware and VEEAM backups.SQL Databases.Experience of maintaining software solutions on various hardware platforms.TCP/IP & Static Networking including Aruba Procurve switches and patching.Desirable Skills / ExperienceExperience with customer facing roles.Conversant with IBM Rational suite (ClearCase / ClearQuest).Experience in supporting and managing hardware/software assets.Experience in software licence management.Experience in Printer management.Conversant with MS Office suite (Word / Excel etc.).Conversant with PowerShell and scripting. Understanding physical hardware configuration and being able to build and modify COTS equipment to details specifications.Windows Defender and Trellix Anti-virus.At DXC Technology, we believe strong connections and community are key to our success. Our work model prioritizes in-person collaboration while offering flexibility to support wellbeing, productivity, individual work styles, and life circumstances. We're committed to fostering an inclusive environment where everyone can thrive.Recruitment fraud is a scheme in which fictitious job opportunities are offered to job seekers typically through online services, such as false websites, or through unsolicited emails claiming to be from the company. These emails may request recipients to provide personal information or to make payments as part of their illegitimate recruiting process. DXC does not make offers of employment via social media networks and DXC never asks for any money or payments from applicants at any point in the recruitment process, nor ask a job seeker to purchase IT or other equipment on our behalf. More information on employment scams is available here .TPBN1_UKTJ

Job descriptionService Advisor - BMW FarnboroughGood, honest, rewarding work. It's how we're built.In the heart of our aftersales department our Service Advisors are committed to delivering outstanding and trusted experiences for our customers. As a Service Advisor you are the main point of contact for all customer communication while the vehicle is undergoing maintenance and repair in our Retail Centre.As part of a successful, global automotive group, you'll broaden your experience across both sites and brands. And with the right support from us, you'll be able to progress as high as you can aim.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Warmly welcome and engage customers in a friendly and professional manner throughout the dayKeep customers informed and updated on the progress of their vehicle repairs, ensuring transparency and trustDevelop and maintain comprehensive product knowledge, enhancing expertise through manufacturer-led trainingActively promote additional services and repairs based on Technician recommendations, helping customers maintain vehicle health and increasing service revenueSchedule vehicles for appointments in the workshop efficiently and accuratelyConduct pre-appointment customer calls to confirm bookings, ensure readiness, and address any preliminary questionsMaintain precise and up-to-date customer records within our systems for effective service managementHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. Excellent communication skills, with the ability to engage effectively with customers and colleaguesDemonstrated experience in delivering exceptional customer serviceSkilled at identifying customer needs and opportunities for upsellingExcellent time management skills and the ability to work under pressurePrevious experience in a target driven role, demonstrating the ability to meet goalsMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.TPBN1_UKTJ

Job descriptionMaster Technician (Mechanic) - Ford Farnborough£60,000 OTE (uncapped earnings)New Technicians are eligible for welcome bonuses totalling £2,500*Time to switch up a gear? Be part of something better.Enjoy support that's second to none as a Master Technician (Mechanic) at Group 1 Automotive. With training at some of the best facilities in the industry, you'll learn new skills while becoming an expert. And best of all, you'll be part of a fun, friendly team that will support you every day.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Perform high-quality vehicle maintenance and repairs, following manufacturer standards and guidelines to ensure reliability and safetyConduct thorough inspections of vehicle components to assess wear, damage, or required replacementsProvide expert technical advice to customers when necessary, ensuring clear and professional communicationMaintain exceptional customer service standards, fostering trust that leads to repeat business and referralsCollaborate effectively with the service reception team and workshop control for seamless workflow and customer satisfactionOffer support and guidance to fellow Technicians in the workshop, promoting teamwork and knowledge sharingHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. NVQ Level 3 in Light Vehicle Maintenance & Repair or equivalent qualificationThorough understanding of vehicle safety standards and guidelinesStrong problem-solving skills, ensuring accuracy in all aspects of workProven ability to meet efficiency targets while maintaining a keen eye for detailAbility to collaborate and contribute positively within a team environmentA current valid MOT licence is advantageous but not essentialMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.*Terms & Conditions; £1,000 sign-on bonus payable after 30 days of employment, a further £500 after 90 days, and a final payment of £1000 after 6 months. Further T&C's apply.TPBN1_UKTJ

Sureserve provide market leading compliance and energy services across the UK, with close to 4000 employees working from over 20 offices.Sureserve is a trusted partner for housing associations, local authorities, and residents, delivering high-quality compliance and energy services. Our focus on energy efficiency, safe and compliant homes, and enhanced quality of life makes us a leader in the industry. With nationwide reach, regional expertise, and a commitment to excellent service, we are well-positioned to support our clients now and in the futureWe're open to applications from experienced Gas Engineers in Glasgow/Edinburgh and Aberdeen.Successful applicants outside Aberdeen will be expected to travel on the Monday morning, stay overnight for the week and then return home on Friday afternoon. Hotels for the week will be provided.Role Overview:Maintain and repair heating systems in our clients' properties ensuring that the heating and hot water systems operate efficiently and safely, and that any repairs are completed in a timely manner ensuring customer satisfaction.The ideal candidate will be a self-motivated professional with strong technical skills, a proactive attitude, and a commitment to delivering quality service. You'll be working across a variety of environments and must be comfortable adapting to different settings and client needs.Key Responsibilities: Carry out service and maintenance works on a variety of domestic properties across the regionEnsuring high levels of customer care in dealing with clients and tenants to meet the required quality standardsCommunicate updates and progress of work, completing the required paperwork electronically and manuallyEnsure all Health and Safety requirements and legislation, including Risk Assessments, Safe Systems of Work and COSHH Records, are adhered to during your daily workcomply with stock ordering and auditing procedures so relevant parts are available to fulfil job requirementsSkills & Experience Valid domestic and/or commercial gas qualifications. As a minimum, successful candidates must have the following: CCN1, CENWAT, HTR1, CKR1 (essential)Valid UK driving licence (essential)Previous practical experience in gas maintenance within a domestic capacitySolid understanding of gas safety regulations and industry standardsStrong problem-solving skills and the ability to work independentlyA professional and friendly attitude with the ability to forge strong relationships with both clients and tenantsWhat we offer?We offer a range of benefits designed to support your lifestyle whilst working for Sureserve and outside of work, some of these include: £43,264 + OTECompany vehicle and fuel card suppliedUniform, PPE & mobile device suppliedContributory pension schemeLife assurance20 days + Bank holidaysEnhanced maternity, paternity, adoption leave and other family friendly policiesSureserve Benefits Hub, accessing over 1000 retail discountsVirtual GP service, available for employees and immediate familyEmployee Assistance Programme (EAP)Bike2Work SchemeEV Car SchemeEmployee engagement events and "Employee Voice" programmesStrong opportunities for career growth and development"Sureserve Legends" - celebrating the fantastic ways in which our employees live our valuesCommitted to Diversity & InclusionSureserve is an equal opportunities employer, dedicated to nurturing a diverse and inclusive work environment. We are committed to equal employment opportunity regardless of race, colour, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. We are committed to developing talent at all levels, ensuring equality, diversity, and inclusion in the way we work and in the communities in which we work, and making sure that every one of our people, clients and customers has the opportunity and support to fulfil their professional and personal potential.Reasonable AdjustmentsAs part of our commitment to inclusivity, we offer reasonable adjustments throughout the recruitment process for individuals that may require them. If you feel you need any adjustments please contact .Pre Employment ChecksSuccessful applicants will be subject to eligibility checks with a 3rd party, including right to work in the UK and DBS background checks.TPBN1_UKTJ

Job descriptionVehicle Technician (Mechanic) - Ford Farnborough£60,000 OTE (uncapped earnings)Experienced Technicians are eligible for welcome bonuses totalling £2,500*Time to switch up a gear? Be part of something better.Enjoy support that's second to none as a Vehicle Technician (Mechanic) at Group 1 Automotive. With training at some of the best facilities in the industry, you'll learn new skills while becoming an expert. And best of all, you'll be part of a fun, friendly team that will support you every day.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Perform high-quality vehicle maintenance and repairs, following manufacturer standards and guidelines to ensure reliability and safetyConduct thorough inspections of vehicle components to assess wear, damage, or required replacementsProvide expert technical advice to customers when necessary, ensuring clear and professional communicationMaintain exceptional customer service standards, fostering trust that leads to repeat business and referralsCollaborate effectively with the service reception team and workshop control for seamless workflow and customer satisfactionOffer support and guidance to fellow Technicians in the workshop, promoting teamwork and knowledge sharingHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. NVQ Level 3 in Light Vehicle Maintenance & Repair or equivalent qualificationExperienced Level 2 qualified technicians with a dealership background are encouraged to applyThorough understanding of vehicle safety standards and guidelinesStrong problem-solving skills, ensuring accuracy in all aspects of workProven ability to meet efficiency targets while maintaining a keen eye for detailAbility to collaborate and contribute positively within a team environmentA current valid MOT licence is advantageous but not essentialMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.*Terms & Conditions; Welcome bonus is available to Level 3 qualified technicians. You will receive £1,000 sign-on bonus payable after 30 days of employment, a further £500 after 90 days, and a final payment of £1000 after 6 months. Further T&C's apply.TPBN1_UKTJ

Arden White Aviation & Aerospace Recruitment is working with a leading business jet organisation in Farnborough to recruit B2 Licensed Avionics Inspectors to join their established aircraft maintenance team.This is an excellent opportunity for an experienced B2 Licensed Engineer or Avionics Inspector looking to take the next step in their career within business aviation.The role offers the opportunity to work within a highly professional aircraft maintenance environment, supporting both line and base maintenance on high-value business jets.Day and night shift opportunities are available, with an enhanced shift allowance for night shifts.The Role As a B2 Licensed Avionics Inspector, you will be responsible for ensuring aircraft maintenance activities meet the required UK CAA, Part-145 and company standards.You will inspect and certify maintenance work within your authorisations, support maintenance teams and ensure aircraft are delivered safely, efficiently and to the required quality standards.Key Responsibilities Act as an Avionics Inspector supporting aircraft line and base maintenance activities.Inspect and certify maintenance tasks within your training, licence and company authorisations.Ensure all maintenance is completed in accordance with UK CAA Part-145 requirements and approved maintenance data.Carry out avionics maintenance and certification activities as required.Support Maintenance Team Leaders and Service Team Managers with day-to-day maintenance activities.Assist with the management and coordination of licensed engineers, inspectors and fitters where required.Ensure all aircraft maintenance documentation is completed accurately and within required timescales.Ensure all task stages and certification requirements are correctly completed before the end of each shift.Monitor maintenance progress and highlight any potential delays or issues to the appropriate management team.Promote and maintain high standards of workmanship, safety, cleanliness and quality.Ensure aircraft and work areas are maintained to the required professional standards.Conduct effective shift handovers to maintain continuity and workflow.Support performance, quality and departmental meetings when required.Provide technical input and highlight any difficulties or shortcomings encountered during maintenance activities.Carry out additional maintenance and inspection duties as required.About You We're looking for experienced aviation professionals with:A current UK CAA Part-66 B2 Aircraft Maintenance Licence or relevant UK CAA aircraft maintenance licence.Relevant aircraft type ratings.Proven aircraft inspection and certification experience.Extensive line and base maintenance experience.Previous experience working within a Part-145 organisation.Strong knowledge of UK CAA aviation legislation and maintenance requirements.Good avionics and aircraft systems knowledge.Experience within business aviation/corporate aviation would be advantageous.Strong attention to detail and a commitment to quality and safety.Good verbal and written communication skills.Good computer literacy and the ability to accurately complete maintenance documentation.A well-organised and proactive approach to daily maintenance activities.The flexibility to work different shift patterns where required.Ideal Backgrounds This role could suit candidates currently working as:B2 Licensed Engineer | B2 Aircraft Engineer | B2 Avionics Engineer | Avionics Inspector | Licensed Avionics Inspector | B2 Inspector | Licensed Aircraft Engineer | Aircraft Maintenance Engineer | Senior Avionics EngineerCandidates from business aviation, corporate aviation, commercial aviation, MRO and other Part-145 environments are encouraged to apply.Shift Pattern Day Shift 4 days on / 4 days off07:00 19:00Night Shift 4 days on / 4 days off19:00 07:00Enhanced night shift allowanceBoth shift patterns offer an attractive 4-on / 4-off working pattern, providing regular blocks of time away from work.Why Apply? This is an excellent opportunity for a B2 Licensed Avionics Inspector to join a highly professional business aviation maintenance environment and take on a key role within an experienced engineering team.You'll have the opportunity to:Work on high-value business jets.Utilise your B2 licence and inspection experience.Gain further exposure to both line and base maintenance.Work alongside experienced aviation professionals.Take on additional leadership and team coordination responsibilities.Develop your career within business aviation.Choose between day and night shift opportunities.Benefit from an enhanced allowance for night working.If you're an experienced B2 Licensed Engineer or Avionics Inspector looking for your next opportunity in Farnborough, we'd love to hear from you.Apply now or contact Arden White Aviation & Aerospace Recruitment for more information.If you feel you have the skills to succeed in this role, please click to apply.Arden White specialises in technical engineering recruitment, and all job applications are managed by our team. We believe in the value of a personal touch, and we work hard to deliver aswift, professional, and friendly service for our clients and candidates. We are acting as a recruitment agency on behalf of our client for this vacancy, and whilst we are advertising the role, we are not the hiring company.Due to the high volume of applications, were unable to respond to everyone individually. If you havent heard from us within 14 days, unfortunately youve not been unsuccessful on this occasion. However, please continue to monitor our website vacancies for more opportunities.TPBN1_UKTJ

Arden White Aviation & Aerospace Recruitment is working with a leading business jet organisation in Farnborough to recruit B1 Licensed Aircraft Engineers to join their established aircraft maintenance team.This is an excellent opportunity for a B1 Licensed Engineer looking to build their career within business aviation, working on high-value business jets in a professional and highly regulated maintenance environment.Both day and night shift opportunities are available, with an enhanced shift allowance for night shifts.Whether you're an experienced B1 Engineer or looking to move into the business aviation sector, we'd be keen to hear from you.The Role As a B1 Licensed Aircraft Engineer, you will be responsible for carrying out aircraft maintenance, inspection, rectification and certification activities in accordance with approved maintenance data and regulatory requirements.Working as part of a highly skilled maintenance team, you will play an important role in ensuring aircraft are maintained safely, efficiently and to the highest quality standards.Key Responsibilities Carry out aircraft maintenance, inspections, defect rectification and modifications.Certify completed maintenance within the scope of your licence and company authorisations.Perform scheduled and unscheduled maintenance activities.Troubleshoot and diagnose aircraft mechanical and associated systems.Complete maintenance documentation, work orders and certification accurately.Ensure all maintenance is carried out using approved data and procedures.Work closely with other engineers, technicians and maintenance personnel.Support aircraft movements and ground operations where required.Ensure aircraft components and customer property are correctly identified and protected.Use aircraft ground support equipment safely and in accordance with approved procedures.Maintain high standards of housekeeping within aircraft, hangar and workshop environments.Comply with all applicable CAA, Part-145, company and health & safety requirements.Support aircraft testing and final certification activities where required.Assist with mentoring and supporting junior engineers and fitters.Take responsibility for maintaining a high standard of workmanship and safety at all times.About You We're keen to speak with candidates who have:A current UK CAA Part-66 B1 Aircraft Maintenance Licence.Relevant aircraft maintenance experience within a Part-145 environment.Experience on business jets would be advantageous, although other aircraft backgrounds will be considered.Strong mechanical and aircraft systems knowledge.Experience carrying out scheduled and unscheduled aircraft maintenance.A strong understanding of aircraft maintenance procedures and regulatory requirements.Excellent attention to detail and a commitment to quality.The ability to work effectively as part of a professional engineering team.Good communication and problem-solving skills.A proactive approach to safety and aircraft maintenance.A willingness to work either day or night shifts depending on preference and business requirements.We Would Like to Hear From: B1 Licensed Engineers | B1 Aircraft Engineers | B1.1 Engineers | B1.2 Engineers | Licensed Aircraft Engineers | Aircraft Maintenance Engineers | Senior Aircraft TechniciansCandidates from commercial aviation, business aviation, military, MRO and other Part-145 environments are encouraged to apply.Shift Patterns Day Shifts Day shift opportunities are available for engineers who prefer a traditional working pattern.Night Shifts 4 days on / 4 days off19:00 07:00Enhanced night shift allowanceThe 4-on / 4-off pattern provides an excellent work-life balance, with regular blocks of time away from work.Why Apply? This is a great opportunity for a B1 Licensed Engineer to develop their career within the business aviation sector and work on high-value business jets.If you feel you have the skills to succeed in this role, please click to apply.Arden White specialises in technical engineering recruitment, and all job applications are managed by our team. We believe in the value of a personal touch, and we work hard to deliver aswift, professional, and friendly service for our clients and candidates. We are acting as a recruitment agency on behalf of our client for this vacancy, and whilst we are advertising the role, we are not the hiring company.Due to the high volume of applications, were unable to respond to everyone individually. If you havent heard from us within 14 days, unfortunately youve not been unsuccessful on this occasion. However, please continue to monitor our website vacancies for more opportunities.TPBN1_UKTJ