Trabajos public en Rainham - Page 3Crear alertas

Year 1 Teacher Needed in Kent - Permanent TLTP are currently working with an OFSTED rated "Good" primary school in Kent. The school are looking to recruit a Year 1 Teacher to start permanently in September 2026. *** Year 1 Teacher based in Kent *** Planning and marking expected for this role *** QTS Required *** Experience in KS1 is essential Do you have experience working in Key Stage 1? Are you able to plan engaging lessons for the pupils? Are you passionate about the learning and development of pupils? If yes to all of the below, then this Year 1 Teacher role is for you! Year 1 Teacher: This Year 1 Teacher role is set to begin in September 2026. There is a teaching assistant based in the class to help support classroom behaviour and general learning and understanding of students. The school are looking for someone to land on their feet with the role, with previous experience in KS1 being essential. The school: This primary school is based in Kent. The school provides education for children from the age of 3 up to 11. This school is known to have an enthusiastic, positive environment for both staff and students alike. The school holds high expectations for their staff. The school offer on-site parking as well as strong transport links for those that would be commuting via public transport. The school require you to have an extensive knowledge of the curriculum and be able to cater to the different learning needs within the class and styles of learning. Interview will be held in due course. To apply for this Year 1 Teacher role, please send your CV to Alfie at TLTP now.

Nursery Teacher Needed in Ebbsfleet – Permanent TLTP are currently working with an OFSTED rated “Good” primary school in Ebbsfleet. The school are looking to recruit a Nursery Teacher to start permanently in September 2026. *** Nursery Teacher based in Ebbsfleet *** Planning and marking expected for this role *** QTS Required *** Experience in EYFS is essential Do you have experience working in Early Years Teacher? Are you able to plan engaging lessons for the pupils? Are you passionate about the learning and development of pupils? If yes to all of the below, then this Nursery Teacher role is for you! Nursery Teacher: This Nursery Teacher role is set to begin in September 2026. There is a teaching assistant based in the class to help support classroom behaviour and general learning and understanding of students. The school are looking for someone to land on their feet with the role, with previous experience in EYFS being essential. The school: This primary school is based in Ebbsfleet. The school provides education for children from the age of 3 up to 11. This school is known to have an enthusiastic, positive environment for both staff and students alike. The school holds high expectations for their staff. The school offer on-site parking as well as strong transport links for those that would be commuting via public transport. The school require you to have an extensive knowledge of the curriculum and be able to cater to the different learning needs within the class and styles of learning. Interview will be held in due course. To apply for this Nursery Teacher role, please send your CV to Alfie at TLTP now

Family Paralegal – Woolwich Office We are seeking a permanent, full-time Family Paralegal for our busy Woolwich office to join our expanding team. Your Profile: You will preferably:- 1. Be embarking on or have completed either the LPC or BPTC and undertaken the family law elective Private Law Children 2. Be able aim to demonstrate an interest in Family law 3. Have strong organisational skills 4. Have the ability to work under pressure We would like the ideal candidate to: 1. Provide the highest level of client care in the management of client matters 2. Provide support to Fee Earners 3. Build relationships with internal and external parties 4. Ensure that files are managed effectively, creating letters or documents on the case management system 5. Attending clients and taking notes 6. Completing public funding applications 7. Collating and redacting large documents for Court bundles where necessary 8. Liaising with the local authorities, Police and medical professionals to request/receive documents. Liaising with Courts and experts Working with us: - The salary for this position is dependent on experience. We will offer ongoing training and support to develop your career as part of a strong and growing multi-office team. Our offices are friendly, working entirely paperless with recent significant investment in modern IT to enable you to work proficiently. We offer a great package of annual leave to ensure you get enough time away from work. Our annual leave for this role provides 23 days (plus bank holidays / Christmas and New Year). We review annual leave and increase with service. Employee benefits with GTS: * Competitive base salary. * Pension Scheme with employer contribution. * Benenden Health Care. * Administrative support. * Firm laptop * Ongoing training and development. * Hybrid working arrangements. * Support from colleagues for case cover. * Supportive supervision from mentors. * Annual appraisals and salary reviews. * Bi-annual parties for Summer and Christmas. * Additional perks and benefits. * Competitive training packages. We have a dedicated in-bound telephony team to take calls and messages for our fee earners. Lawyers also have the benefit of dictation and support staff to assist in easing the pressure and enabling efficient working. We are a multi-office, multi-service Legal 500 and Chambers & Partners firm recognised for excellence in a variety of legal fields

Job Role: Field Service Engineer (Industrial Cleaning Equipment) Location: Dartford, Kent (accepting applications from commutable locations) Salary: £38,000-£41,000 base salary (OTE £50,000+) Hours: Monday-Friday (Days only) 40 hours per week + Door to Door Paid + Overtime @ 1.5x Job Type: Full time, Permanent The client: Interaction have partnered with a rapidly expanding, rewarding and innovate organisation within the Industrial Cleaning Equipment sector to support the growth of their engineering team. Due to continuous growth, we are looking for a skilled electromechanical engineer interested in learning, developing and progressing within the industrial cleaning machinery sector. The Package • 25 days annual leave + public holidays (33 overall) • Full & Comprehensive Training Scheme surrounding electrical and mechanical fault finding+ repair on specific Industrial cleaning products • Wider group company pension scheme • Internal and external training + development both on products and the electrical mechanical certificates • A 12 week structured training and welcome process to support you joining the team and understanding the product range. • Laptop, Company Vehicle, Fuel Card • Development and progression routes into management / senior positions • Overtime available at 1.5X • Door to Door Paid to site from home to/from site. The Responsibilities • To attend breakdowns, service and installations on an array of industrial cleaning equipment, operating in a 1 hour radius of your area. • The use of manual hand tools (Spanners, Screwdrivers), electrical hand tools (powered drills, grinders), lifting equipment (lifting slangs, hoists etc), Hot working tools (Blowtorch, heat guns) • To carry out electrical, electronic, mechanical fault finding and repairs on industrial cleaning equipment, IG Engines (Petrol, Diesel, LPG). • To manage your time effectively to ensure work is carried out to a high standard in a timely manner. • Update job reports and order parts when necessary. • Ensure Health & Safety Procedures are followed The Requirements • Electrical, Electrical and/or Mechanical fault finding, repair & service experience would be advantageous. • A good level of electrical or mechanical knowledge, similar roles could include plant engineer, maintenance engineer, hydraulic engineer, pneumatic engineer, mechanical fitter. • Relevant qualifications NVQ or City and Guilds in mechanical/electrical engineering- not essential but would be an advantage. • Experience using electrical & mechanical tools. • Previous experience as a mechanical, electrical or field based engineer working on diesel engines and using electrical diagnostic tools • Full UK Drivers License Interaction Recruitment have specialist consultants across the majority of industries within the UK, including but not limited to, Finance & IT, Technical & Engineering, Industrial, Commercial and Hospitality. We offer both temporary and permanent support. For more information regarding the position or to discuss any other opportunities, you can reach Julius on (phone number removed) or email (url removed) Similar roles include: Mobile Plant Fitter, HGV Mechanic, Forklift Engineer, Plant Engineer, Vehicle Mechanic, agricultural engineer Thank you for taking the time, we hope to speak in the near future. INDTE

Senior Accountant - Accountancy Practice Rural Dartford (you will need your own transport due to lack of public transport nearby) Full-Time Temporary Start ASAP £20 - £22 per hourJoin our client's team as a Senior Accountant based in rural Dartford. This is a fantastic opportunity to work within an established accountancy practice, where you'll play a key role in supporting a diverse client portfolio. As a Senior Accountant, you will be hands-on, client-facing, and instrumental in delivering high-quality accounting services. This role is ideal for someone who can hit the ground running and is confident working within a fast-paced practice environment. Key Responsibilities Preparing statutory accounts for sole traders and limited companies Completing corporation tax computations and returns accurately and on time Managing and supporting client credit control, including monitoring balances and chasing outstanding payments Liaising directly with clients regarding accounts, tax matters, and queries, offering clear and professional advice Daily use of Xero, ensuring accurate bookkeeping, reconciliations, and reporting Supporting and overseeing payroll processing, ensuring compliance with legislation and deadlines Using TaxCalc and other accountancy software as required Managing multiple client workloads effectively, prioritising deadlines with excellent attention to detail Delivering outstanding customer service and building strong, long-term client relationships What We're Looking For Proven experience using Xero Accounting Software Recent experience within an Accountancy Practice Strong analytical and problem-solving skills A professional and client-focused approach, with first-class customer service skills ✨ AMAZING Benefits of Becoming an Office Angels Temp ✨ Weekly pay Up to 28 days annual leave Access to free eyecare vouchers Temp of the Month awards Mobile-friendly timesheet completion Perks at Work discount schemes Access to wellbeing platforms This is a full-time temporary position, offering an immediate start for the right candidate. Next Steps If you are available immediately, meet the criteria above, and would like to be considered, please send over your most up-to-date CV today. Due to the high volume of applications, we're unable to respond to everyone. If you are shortlisted, we will be in touch within 48 hours. Office Angels is an employment agency and business. We are an equal-opportunities employer who puts expertise, energy and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, abilities and more. By showcasing talents, skills and unique experiences in an inclusive environment, we help individuals thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Office Angels acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Office Angels UK is an Equal Opportunities Employer. By applying for this role your details will be submitted to Office Angels. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website

Job Title: HGV Technician Area: East London Shift Pattern: Monday to Friday (Days) Basic Hours 36 ( 3 Days minimum ) Salary: Excellent plus great benefits Holidays: 33 days including bank holidays Sick Pay: Yes Pension: 5% contribution from employer Job Type: Full-time, Permanent/ Contract Are you an HGV Technician/Fitter looking for a secure well paid role in East London? Galaxy Personnel is looking for HGV Technician/Fitters. If you are looking for a secure well paid permanent job with 33 days holiday, sick pay, great pension contributions, and great pay this could be the role for you!!! Key Role Objectives * Identify problems and apply advanced diagnostic methods or computer equipment to identify causes and achieve satisfactory solutions; * To inspect, maintain, service, diagnose, repair and adjust plant and their associated components and systems in a safe and economical manner employing such skills and knowledge as may be required to current Road Transport and Health & Safety legislation and policies. * Inspect, fit and balance vehicle tyres and carry out puncture and other minor repairs * Complete repairs to hydraulic systems * Hold a qualification to complete Ministry of Transport (MOT) Testing classes 4,5 & 7 * Respond to call outs, carryout roadside repairs of vehicles following breakdowns, liaising with emergency services as necessary and advising members of the public * To drive, deliver, collect, road test and present for testing all vehicles to Heavy Goods Vehicle (HGV), Passenger Carrying Vehicles (PCV), light commercial, including plant machinery What you will need: * Holds Parts 1,2 and 3 City & Guilds Motor Vehicle Craft Qualification or equivalent * Hold a full category C or D license, reasonable adjustments will be considered for disabled candidates If this is a role you would be interested in and want to hear more Contact David Steel (phone number removed)

We are currently working alongside a civil enigneeirng and construction contractor to recruit an experienced Site Agent to be based on a civil highways project in Kent valued c£20m As a Site Agent you will be responsible for the management of various construction sites at the mid level value , in order to achieve required project delivery to the customers objectives, while maintaining standards of health and safety, quality, environmental impact and cost control. Responsibilities: • Be responsible for the successful delivery of projects • Supervise the delivery to the project programme • Understand and interpret drawings and specifications • Provide support to the project team • Ensure all staff, subcontractors and visitors are properly inducted, meet the competencies required of them and hold relevant qualifications and tickets • Undertake an ambassadorial role, representing the Business to customers, the public and official bodies • Comply with Company procedures and legal obligations at all times, promoting best practice • Establish safe working cultures and practices and environmental compliance • Maintain and manage construction sites and subcontractors, developing positive working relationships About You • Considerable experience in Civil Engineering • Working knowledge of JCT / NEC contract conditions, CDM regulations, design management, programme and risk management and cost control including forecasting, actual cost and value reporting • Good knowledge of specifications and testing regimes relevant to general civil engineering Requirements * Proven experience as a Site Agent or Senior Site Engineer * Strong background in civil engineering works * Excellent knowledge of health, safety, and environmental compliance * Strong leadership, communication, and problem-solving skills * Relevant engineering or construction qualification * Valid Safe Pass / CSCS (or equivalent) * Confined Spaces, Temporary Works, or EUSR cards (desirable)

HVAC Project Manager – NHS Projects Division Dartford & Surrounding Areas £60,000 – £70,000 + Package We’re working with a leading Facilities Management provider who are looking to appoint an experienced HVAC Project Manager to join their growing Projects division, delivering works across NHS and healthcare environments. This is a fantastic opportunity to join a well-established business with a strong pipeline of secured work, offering long-term progression and the chance to work on critical infrastructure projects. The Role: You’ll be responsible for managing HVAC projects from initial planning through to completion, ensuring works are delivered safely, on time, and within budget across live healthcare environments. Key responsibilities include: • Managing full project lifecycle across HVAC installations and upgrades, • Working within live NHS sites, ensuring minimal disruption to operations, • Producing and managing project documentation (RAMS, programmes, reports), • Coordinating subcontractors and internal teams, • Managing client relationships and attending progress meetings, • Overseeing health & safety and ensuring compliance with healthcare regulations, • Financial oversight including cost control, variations, and reporting Requirements: • Proven experience as an HVAC Project Manager within FM or M&E, • Experience working in NHS or healthcare environments is essential, • Strong understanding of compliance, HTM standards, and working in live environments, • Excellent client-facing and communication skills, • Ability to manage multiple projects simultaneously, • Relevant technical qualifications (mechanical/HVAC background preferred) What’s on Offer: • Competitive salary and benefits package, • Clear progression within a growing projects division, • Secure, long-term work across public sector frameworks, • Opportunity to work on high-profile and critical healthcare projects If you’re looking for a role where you can make a real impact within essential environments and be part of a supportive, forward-thinking team, this could be a great move. Drop me a message for more details or a confidential chat

Power Tool Product Specialist A home and field based role covering the South East of England Work for a world leading power tools manufacturer Provide product training and demonstrations to commercial customers Job Description: Salary to £37,000 + annual bonus + company van + pension + healthcare + 25 days holiday + workwear + mobile + fuel card Join a world leading, specialist power tool brand in a field based role that strengthens the UK sales team by supporting their customers. Key responsibilities will include: Efficient diary management and scheduling of customer visits Work with commercial end-users such as landscape contractors, council groundscare staff, golf courses and facilities management companies Conduct demonstration and training sessions in both indoor and outdoor settings Provide safe, informative and inspiring training sessions that build desire for the brand Represent the brand at regional and national trade events Provide feedback and share best practice within your team About the Company: A world leading manufacturer of power tools that is a first choice supplier to many professional users in groundscare, agriculture and golf course maintenance. This is a first class employer that offers an outstanding career opportunity, training and benefits package to new recruits. Key Skills/Experience Required: To maximise the success of this role we are looking for a candidate who can offer: A home location in the South East of England Hands-on experience with outdoor power tools and a background within a garden machinery dealer or in agriculture, groundscare or forestry. Excellent communication skills and a confident public speaker Comfortable in a wide range of customer environments from a board room to a golf course Well planned and organised IT literate Salary/Benefits Information: Salary to £37,000 + annual bonus + company van + pension + healthcare + 25 days holiday + workwear + mobile + fuel card Contact: Nick Hester Job Reference: NH/102600 Candidate care: By responding to this advert you consent to Cavendish Maine processing the personal data included within this application. If your application is successful we will contact you to discuss the opportunity in more detail, within 48 hours of receiving your application. Should you not hear from us within 3 working days please assume your application has been unsuccessful on this occasion. Please be advised that if unsuccessful for this role we may keep your details in our hold file, during which time you may be contacted for other suitable vacancies. If you do not want us to do this please call us to advise. In the meantime, we would like to thank you for your interest in Cavendish Maine. TPBN1_UKTJ

Technical Leadership. Modernisation Expertise. Field Excellence. Are you a highly technical lift professional – possibly a former Engineer – ready to step into a leadership role within a Private Equity-backed engineering services business? Liftec Express – a leading independent provider of lift and escalator maintenance, repair and modernisation services across the UK – is entering an exciting phase of growth and value creation. We are now seeking a Field Manager with strong lift modernisation experience to oversee site operations across multiple projects, working closely with the Project Manager to ensure safe, high-quality and profitable delivery. Full training and support are available for engineers looking to progress into a management role. The Role at a Glance: Field Manager – Lift Installation & Modernisation South East / London / Home Counties - Access to Dartford or Andover Offices £50,000 - £55,000 Plus Extensive Benefits Package in Car Allowance Core hours: Onsite 08:00-17:00, with one hour for lunch Note: We will buy you out of any training funded by your current employer. Company: Pioneer of the British lift industry. Formally part of global brand Otis - Private Equity-backed by R Capital since 2025. An independent service provider, specialising in the supply, installation, maintenance, repair and modernisation of all types of lift equipment Pedigree: Clients include national retail chains/major hospitals, large facilities management providers and MOD sites Culture: Safety, Ethics & Quality Focused Your Background: Lift Engineer with modernisation or installation experience Qualifications: NVQ Level 3 in Lift Engineering (essential) Who we are: Liftec Express is a well-established, highly respected name in the UK lift and escalator services sector. Previously part of OTIS, the world's leading manufacturer and service provider of elevators, escalators, and moving walkways - the business is now owned by R-Capital and, with greater agility as a standalone company, is gearing for accelerated growth. The business delivers installation, maintenance, repair and modernisation solutions across commercial, residential and public-sector environments – including prestigious and high-profile sites. As a Private Equity-backed organisation, Liftec is focused on operational excellence, safety, quality and sustainable growth. This is an opportunity to join a technically strong, supportive environment where engineering expertise is highly valued. Ready to take the next step in your career? Reporting to and working alongside a Project Manager, you will take responsibility for the effective day-to-day management of site operations on lift installation or modernisation projects. You will define project objectives and manage multiple installation or modernisation sites, supervising the installation of equipment, monitoring site progress and coordinating with stakeholders both on- and offsite. Ensuring projects run on time and within budget will be central to your role, alongside monitoring engineers and subcontractors to maintain delivery standards. You will communicate and coordinate with owners, architects, consultants, contractors, suppliers and subcontractors, acting as the key technical point of contact on site. Working closely with the wider project team, you will mitigate safety, ethics and quality risks, ensuring compliance with Liftec Express policies as well as government and legal requirements. You will support customer satisfaction, provide technical engineering guidance and contribute to improved project profitability. You will also train and monitor subcontractors (where applicable), ensuring high standards of safety, quality and operational delivery across all projects. About You: • An experienced lift professional with a strong background in installation and/or modernisation, you bring deep technical knowledge of lift systems and site-based operations. • An NVQ Level 3 in Lift Installation (or equivalent) is essential. NVQ4 in Lift Commissioning, SMSTS or SSSTS certification and an appropriate CSCS card would be advantageous. • You have excellent communication and leadership skills, with the ability to coordinate multiple stakeholders in a dynamic, customer-focused environment. Organised and self-reliant, you are comfortable managing site activities, monitoring progress and maintaining accurate documentation. • Strong computer skills and commercial awareness underpin your ability to support project performance and profitability. • Whether you are already operating in a field management capacity or are a senior engineer ready to step up, you will be supported with structured training and development. Benefits: • Access to Discounts Platform • Pension (Day 1) - Aviva • Holiday – 25 days per year plus bank holidays – holiday year - January to December • Wellness (Day 1) - Employee Assistance Programme • Death in Service (Day 1) 3 x Salary - Canada Life • Sickness Scheme - Discretionary • Family Policies - Industry-leading enhanced maternity and paternity provision subject to service • Incentive Scheme - Discretionary • Car Allowance • Overtime paid Monday to Saturday at 1.5 times the normal rate and on Sunday/Bank Holidays at 2 times – pre-approved only. • Night call: One week in four; standby £50 per weekday night, £125 per weekend night. • Engineer Incentive Scheme - Discretionary • Radius Pay – detailed in Variable Pay Policy • Employee Referral Scheme Why Join Liftec Express? • Technical leadership role within a respected PE-backed engineering business • Strong pipeline of installation and modernisation projects • Clear progression pathway from Engineer to Field Management • Supportive, safety-first culture • Opportunity to influence quality, performance and customer satisfaction If you are a technically strong Lift Engineer or Field Supervisor looking to progress into a Field Manager role within a respected engineering services business, we would love to hear from you. Apply now to explore this opportunity in confidence. Application notice... We take your privacy seriously. When you apply, we shall process your details and pass your application to our client for review for this vacancy only. As you might expect you may be contacted by email, text or telephone. Your data is processed on the basis of our legitimate interests in fulfilling the recruitment process. Please refer to our Data Privacy Policy & Notice on our website for further details. If you have any pre-application questions please contact us first quoting the job title & ref. Good luck, Team RR. TPBN1_UKTJ

Rydon Maintenance are seeking a skilled Carpenter with experience inspecting and repairing Fire Doors to join our repairs and maintenance team. The role will involve carrying out fire door inspections, repairs and replacements in Hospitals, Ambulance Stations, Care Homes and other commercial buildings in the South East. Rydon Maintenance is an expanding division of the Rydon Group and is successfully providing hard facilities management services to a variety of clients, predominantly within the healthcare sector. Rydon Maintenance provides hard FM (facilities management) services across England for a growing number of NHS Trusts. We look after more than 250 buildings on behalf of 20 NHS Trusts on a planned and responsive repairs and small works projects basis. We provide maintenance services to hospital's, ambulance trusts, primary care trusts as well as mental health trusts. Job Purpose We are seeking a Fire Door Carpenter to complete inspections, maintenance, repair and replacement. The role will involve travelling to a number of healthcare and public buildings on various contracts we have with the NHS in the South East. You will be provided with a company van and fuel card for travel so a UK driving licence is required. Key Responsibilities include; Inspection of fire doors to assess whether repairs or replacements are required. Fire Door Maintenance / Remedial Works including the fitting of door stoppers. To be familiar with and understand the current fire regulations to ensure the doors are fully compliant. Conducting inspections and ensuring fire doors are compliant with fire safety regulations. Adjusting door frames, ironmongery, and seals for a proper fit and function. Identifying and rectifying any fire door defects. Installation of new Fire Doors and frames - the successful candidate will receive the necessary training for the installation of new Fire Doors. Ensuring all work meets industry regulations and safety standards. This is a full time position and working hours are 40 per week, Monday to Friday 8am to 5pm What we can offer you; Competitive Starting Salary Company van and fuel card Holiday Entitlement: 33 days per annum (inclusive of bank holidays) Holiday Purchase Scheme: Buy up to an additional 5 days holiday (That's 38 days holiday inclusive of bank holidays) Pension Scheme: 4% contributory. Free Flu Vaccinations and Eye Care Vouchers Health Cash Plan: helping you spread the cost of essential healthcare 24/7 EAP Service: free advice, counselling and support for you and your family whenever you need it. Wellbeing and mental health champions readily available at work. Access to an employee discount scheme which includes a wide-range of special offers and discounts on insurances, lifestyle goods and services. Flexible benefits for you to choose from including Critical Illness, DenPlan and Cycle to work schemes. Employee Referral Scheme: recommend a personal connection to us and claim a cash reward for their successful hire. Opportunities for you to progress your career across the business Experience Required The ideal candidate should hold a NVQ Level 2 qualification in Carpentry and Joinery. You will have previous experience with the maintenance, repair and replacement/Installation of fire doors. This role would suit an individual with experience working in healthcare environments such as hospitals, care homes etc, although this isn't essential and candidates with relevant experience gained in other sectors will also be considered. You will have strong communication skills and the ability to work well within a team environment. Excellent Customer Service skills Knowledge of health and safety regulations A valid UK driving licence (No more than 6 points) Additional Information As a well established, progressive company we are committed to attracting and retaining individuals by offering an excellent benefits package that includes a wide range of core and voluntary benefits. Rydon is an equal opportunities employer and promotes diversity in employment. Successful candidates will be selected solely on their ability to carry out the duties of the post. To be redirected to our dedicated careers page to complete your application

Job Title: Cleaner Location: Woolwich, London Hours: 5:00pm - 7:00pm, Monday to Friday Pay Rate: £12.71 per hour - Paid Weekly Job Description: We are seeking a reliable and hardworking Cleaner to join our team. This role involves maintaining cleanliness and hygiene in a large public building, including corridors, side rooms, kitchens, and amenities. Key Responsibilities: Perform general cleaning duties across various areas of the building. Ensure that all assigned areas are cleaned to a high standard. Handle cleaning supplies and equipment responsibly. Adhere to health and safety guidelines at all times. Previous cleaning experience is preferred but not essential. Strong attention to detail and commitment to maintaining a clean environment. Ability to work independently and efficiently within the allotted time. Punctuality and reliability are essential. Benefits: Immediate start available. Weekly pay. Opportunity to work in a supportive team environment. If you are interested in this position and meet the above criteria, please send your up-to-date CV for immediate consideration

Great opportunity to work as an MHE Trainer/Instructor for our clients' well-established logistics provider delivering warehousing and distribution services across the UK. Our Dagenham site supports a range of major clients, including well-known drinks brands. Staffline is recruiting MHE Trainer/Instructors, Aisle Master (Bendy Truck) in Dagenham. The rate of pay is £17.95 per hour. This is a full-time role working fixed shifts Monday to Friday and the hours of work are: - 8am to 4pm Applicants will hold an Accredited MHE Trainer or Instructor certification (RTITB, ITSSAR, AITT, or equivalent) and have a valid teaching/instructor license, which is highly desirable. Your Time at Work The Material Handling Equipment (MHE) Trainer will be responsible for planning and delivering effective training sessions, as well as carrying out assessments to ensure warehouse colleagues can operate equipment safely and efficiently. This includes machinery such as High Level Order Pickers (HLOP), Very Narrow Aisle (VNA) trucks, forklifts, Aisle Master (Bendy Truck) and Powered Pallet Trucks (PPT). Other duties include: • Planning and delivering accredited training and refresher sessions for warehouse colleagues on HLOP, VNA, forklift, Aisle Master (Bendy Truck) and PPT equipment. - Carrying out practical and theoretical assessments to ensure all operators meet both internal requirements and external safety standards. - Keeping training records, licenses, and certification documentation accurate and up-to-date for all MHE operators. - Encourage and maintain a strong safety culture by ensuring full adherence to company procedures and industry regulations. - Working closely with the warehouse management team to identify skill gaps and implement suitable training programs. - Conducting regular reviews and observations of operators to maintain high levels of competence and compliance. - Providing on-the-job coaching and support to both new starters and existing staff to improve performance and efficiency. - Supporting induction processes by delivering MHE-related training and safety briefings for new employees. Our Perfect Worker This position requires a hands-on, safety-conscious individual who will work in partnership with warehouse and operational teams to support high-performance standards while ensuring full compliance with all relevant health and safety requirements. Your skills will include: • Experience operating and training others on HLOP, VNA, forklifts, Aisle Master (Bendy Truck) and PPTs. - Good understanding of warehouse work, health and safety, and MHE rules. - Clear communication and good people skills. - Able to support and motivate staff at all levels. - Organised and able to keep accurate records. Key Information and Benefits • Earn £17.95 per hour - Monday to Friday - Temp to perm opportunity - On-site support from Staffline - Free car parking on site - Canteen on site - Free hot drinks - Good links to public transport - PPE provided - Full training provided - Opportunities for overtime Job Ref: 1GBDA About Staffline Staffline is the UK's leading provider of flexible, temporary and permanent workforce solutions, enabling over 28,000 people into good work every day. We operate at more than 350 customer sites across England, Scotland and Wales. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline. TPBN1_UKTJ

Domestic Gas / Heating Engineer Thurrock / Essex (Field-Based Role) £42,000 – £48,000 + Benefits Full-Time | Monday–Friday + Call-Out Rota I’m currently working with a well-established national organisation that delivers heating, energy, and compliance solutions to social housing and public sector clients across the UK. Due to continued growth, they are looking to recruit an experienced Domestic Gas / Heating Engineer to join their field-based team covering Thurrock and surrounding Essex / East London areas. The Role This is a mobile position where you’ll be responsible for servicing and repairing domestic heating and hot water systems within residential properties. You’ll play a key role in ensuring systems are safe, efficient, and fully compliant, while delivering excellent customer service. ️ Key Responsibilities • Service, maintain, and repair domestic gas heating systems, • Carry out fault-finding and breakdown work, • Ensure all work is completed to a high standard and in line with regulations, • Provide excellent customer service to residents and clients, • Complete job reports and documentation accurately, • Adhere to all Health & Safety requirements, • Manage stock and materials effectively ✅ Requirements • Domestic gas qualifications: CCN1, CENWAT, HTR1, CKR1, • Proven experience in servicing and repairing heating systems, • Full UK driving licence, • Strong customer service and communication skills, • Ability to work independently, • Willingness to participate in an out-of-hours call-out rota What’s on Offer • Company vehicle and fuel card, • Uniform and mobile device, • Ongoing training and development, • Employee wellbeing support, • Enhanced annual leave, • Enhanced family leave packages, • Healthcare cash plan, • Cycle to Work scheme & EV options, • Long-term career progression ℹ️ Additional Information • Monday to Friday, 8:00am – 5:00pm (1-hour lunch), • Evening/weekend call-out rota required, • Subject to right-to-work, reference, and DBS checks Compliance & Equality Statement Ardour Associates values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. #GasEngineer #HeatingEngineer #DomesticGas #GasSafe #CCN1 #CENWAT #HTR1 #CKR1 #BoilerEngineer #ServiceEngineer #BreakdownEngineer #MaintenanceEngineer #FieldServiceEngineer #SocialHousing #EngineeringJobs #EssexJobs #ThurrockJobs #EastLondonJobs #RMPostcodes #MobileEngineer #TradesJobs #SkilledTrades #EngineeringCareers #HiringNow #JobOpportunity #Recruitment #ArdourAssociates #ComplianceJobs #EnergySector #HeatingJobs

Hayley Dexis has an exciting opportunity available for a self-motivated Stores Operative to join our well-established and experienced team based at our customer site located alongside the river in Belvedere. You will join us on a full time, permanent basis and in return, you will receive a competitive salary and have access to a range of benefits. Hayley Dexis is the largest independent distributor of engineering products and consumables (hydraulics, bearings, fasteners, fluid power, PPE, tools, lubricants etc) in the UK. With a commitment to innovation and excellence, we provide cutting-edge solutions to our clients across various industries. We are an equal opportunities employer, currently employing over 1,300 people who continue to be a cornerstone of our business and are fundamental to providing industry-leading customer service. About the Stores Operative role: The Stores Operative essentially supports in the customer’s engineering stores and is based within our customer site. Working in collaboration and with the support of our existing onsite staff you will be working collaboratively with the customers engineering team. Our customer is one of the UK’s leading recycling and waste management companies. You’ll need to be a confident communicator in dealing and managing the customer, being the face of Hayley on-site. The ideal candidate will have a good mix of stores exposure with stock checking experience, coupled with excellent computer skills. An engineering background or manufacturing sector background is preferable, but training in all areas is available for the right candidate. Working Hours: 40 hours per week Monday to Friday 07:00 – 16:00 Key responsibilities as our Stores Operative: Manage critical stock levels using the sites CMMS system. Carry out daily/weekly stock checks to reflect the requirements of the Contract. Manage workshop consumables. Assist engineers in issuing spares required from the stores. Add new items to stock as required, label products and stores racking to suit. Book in all deliveries on the required systems and put the spares away in the stores or allocated order collection points for engineers. Assist with site specific project work. What we're looking for in our Stores Operative: Strong interest in Engineering with the ability to work collaboratively in a team environment Warehousing / Stores background with stock checking experience Customer-focused, driven to provide consistently high levels of service. Good level of computer skills, including Microsoft Office. Good level of communication and numerical skills. Ability to prioritise workload and time management. What you’ll get in return From 23 days annual leave (plus public/bank holidays) increased with length of service. Training provided through our own Hayley Academy. Company pension Life Assurance cover (x2 salary). Invitation to healthcare schemes. Wellness programmes. Uniform and PPE provided. Excellent opportunities and career prospects available. The recruitment process: Our advert will close on Monday 4th May, but we may close the advert early depending on the level of applications received - so be quick! Shortlisted candidates will be invited to a short, informal video call with our Talent Acquisition Advisor. Candidates selected for final stage interview will be asked to prepare for an interview lasting 1 hour focused on skills, knowledge, experience and motivations. Finally... We know sometimes you might feel that you don't meet the criteria or have a question that you would like to ask - we're here to help so please ask us! You can contact us here; (url removed) We aim to get back to everyone that applies and are super keen to speak to talented people for upcoming positions. Please inform our careers team if you require any adjustments throughout the recruitment process. Don’t miss out on this fantastic opportunity to join the team at Hayley Dexis – please click ‘apply’ now to become our Stores Operative, we'd love to hear from you

Joinery Designer - (Joinery/Carpentry/ Fit out) Location: Romford (office based) Salary: £40,000 – £55,000 (depending on experience) Hours: Monday to Friday, 8:00am – 5:00pm About the Role We are seeking an experienced Draughtsman / Designer to work on bespoke joinery and high-end fit-out projects across commercial and specialist environments. This role will involve producing detailed technical drawings, developing design solutions, and supporting projects from concept through to installation. The successful candidate will play a key role in ensuring designs are practical, accurate, and aligned with both client specifications and manufacturing requirements. Key Responsibilities • Produce detailed manufacturing and installation drawings using SolidWorks and AutoCAD., • Develop bespoke joinery and washroom design solutions based on client requirements., • Liaise with project managers, site teams, and production to ensure design feasibility., • Interpret architectural drawings and specifications., • Revise drawings in line with project changes and client feedback., • Attend site surveys, project meetings, and coordination reviews when required., • Ensure all designs comply with relevant standards and project deadlines. Requirements • Proven experience in joinery, fit-out, or carpentry., • Strong proficiency in SolidWorks and AutoCAD., • Good understanding of manufacturing processes, materials, and installation methods, • Ability to read and interpret architectural and construction drawings., • Strong communication and organisational skills., • Ability to work both independently and as part of a wider team.., • Understanding of carpentry and joinery is essential., • Full UK driving license (required due to office location and site visits) , no access with public transport. What’s on Offer • Competitive salary based on experience., • Company pension (after 3 months)., • Private healthcare (after 1 year)., • Travel allowance / access to company vehicles for site visits., • Opportunity to work on high-quality, bespoke projects., • Supportive team environment with long-term career prospects

Draughtsman / Designer (Joinery/Carpentry/ Fit out) Location: Romford (office based) Salary: £40,000 – £55,000 (depending on experience) Hours: Monday to Friday, 8:00am – 5:00pm About the Role We are seeking an experienced Draughtsman / Designer to work on bespoke joinery and high-end fit-out projects across commercial and specialist environments. This role will involve producing detailed technical drawings, developing design solutions, and supporting projects from concept through to installation. The successful candidate will play a key role in ensuring designs are practical, accurate, and aligned with both client specifications and manufacturing requirements. Key Responsibilities • Produce detailed manufacturing and installation drawings using SolidWorks and AutoCAD., • Develop bespoke joinery and washroom design solutions based on client requirements., • Liaise with project managers, site teams, and production to ensure design feasibility., • Interpret architectural drawings and specifications., • Revise drawings in line with project changes and client feedback., • Attend site surveys, project meetings, and coordination reviews when required., • Ensure all designs comply with relevant standards and project deadlines. Requirements • Proven experience in joinery, fit-out, or carpentry., • Strong proficiency in SolidWorks and AutoCAD., • Good understanding of manufacturing processes, materials, and installation methods, • Ability to read and interpret architectural and construction drawings., • Strong communication and organisational skills., • Ability to work both independently and as part of a wider team.., • Understanding of carpentry and joinery is essential., • Full UK driving licence (required due to office location and site visits) , no acces with public transport. What’s on Offer • Competitive salary based on experience., • Company pension (after 3 months)., • Private healthcare (after 1 year)., • Travel allowance / access to company vehicles for site visits., • Opportunity to work on high-quality, bespoke projects. Supportive team environment with long-term career prospects