Electrical jobs in Houston, Texas - Page 20Create job alerts

Job Description 100% nationwide travel role Company vehicle, gas card, lodging, and per diem provided Top Skills - Must Haves • IP Cameras, • Cat5, • Cat6, • IDFS, • Install, • Cabling 1. Current/Valid State's drivers license - Will be traveling in company vehicle, 2. 2+ years of IP Camera Experience • Installation of IP cameras (axis cameras preferred), • Configuration of cameras and field of view experience 3. Ability to read blueprints, installation scopes, and diagrams • Interview will show blue print and technician will need to know how to read it 4. Experience operating a scissor lift for installations Description Position Overview We are seeking experienced Traveling Cable / Low‑Voltage Technicians to support a large‑scale retail security camera rollout. This role involves nationwide travel, working as part of a team to install, cable, test, and validate IP camera systems according to strict installation and field‑of‑view (FOV) requirements. Technicians will be responsible for complete end‑to‑end installation activities, including structured cabling, hardware mounting, camera configuration support, validation, and documentation. Key Responsibilities Install Axis IP security cameras per approved scope (approximately 35–38 cameras per site) Perform structured cabling (CAT5e/CAT6) from cameras to IDFs Terminate, label, and organize cabling in IDFs and camera locations Test and certify cabling using industry‑standard testing equipment (Fluke preferred) Mount camera hardware using appropriate solutions including: Unistrut Conduit Surface and ceiling mounts Verify network connectivity to required IDFs Support camera configuration verification and firmware checks (in coordination with Help Desk) Assist with Field‑of‑View (FOV) validation to ensure cameras align with shot guide requirements Make physical camera adjustments as requested by the client AP team Return to sites as needed for follow‑up adjustments or corrections Capture and upload required deliverables: Camera images Test results Validation documentation Upload documentation into ServiceNow Follow all site safety, PPE, and customer requirements Work effectively in teams of four on overnight shifts (typically four nights per store) Skills ip cameras, Cat5, Cat6, idfs, Install, Cabling, cctv systems, Punchdown, Low voltage, Cable installation, cctv, Structured cabling, Installation Additional Skills & Qualifications Required Skills & Experience 2+ years experience in low‑voltage or structured cabling environments Strong hands‑on experience with: CAT5e/CAT6 cabling Termination and testing Retail or commercial environments Familiarity with IP security camera installations (Axis experience preferred) Ability to read and follow installation scopes, shot guides, and diagrams Comfortable working in IDFs and ladder/lift environments Basic understanding of network connectivity and troubleshooting Strong attention to detail and documentation accuracy Ability to travel 100% nationwide for extended periods Ability to work overnight shifts and maintain productivity Preferred Qualifications Axis camera installation experience Fluke certification or strong testing experience Conduit bending or light electrical/EMT experience Previous big‑box retail rollout experience (Lowe’s, Walmart, etc.) Experience working with ServiceNow or similar ticketing/documentation systems #WRO Job Type & Location This is a Contract position based out of Houston, TX. Pay and Benefits The pay range for this position is $23.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionServerfarm is a leading developer and operator of data centers with over 750+ locations and key customer relationships in 45 countries. We're revolutionizing how data centers operate across North America, Western Europe, and Israel, serving the world's leading technology and hyperscale companies. With Manulife Investment Management's acquisition in 2023 and our award-winning InCommand platform we're positioned for explosive growth as AI adoption and cloud migration drive unprecedented demand for data center capacity. A career at Serverfarm means being at the forefront of digital infrastructure innovation, where your work directly impacts how the world's data is managed and secured. As we target 4x growth over the next four years, you'll have unprecedented opportunities to take on new challenges, develop cutting-edge skills, and grow your career across our expanding global operations. Join our team of innovators and help shape the future of sustainable data centers while building a career without boundaries.Key Accountabilities: • Serves as an operations SME for a major area of operations (e.g., electrical or mechanical) and provides oversight and training/mentorship to team members on tasks regarding these subsystems, • Demonstrates solid understanding of and operates equipment and systems across all disciplines (e.g., electrical, mechanical) with knowledge of the interactions between them and overall operation of a data center., • Operates all systems and equipment in accordance with Serverfarm, industry and OSHA safety practices and protocols., • Supports site/campus team in the inspection and supervision of critical environment-related facility equipment (e.g., controls, HVAC, electrical and mechanical systems), • Assists in and monitors the performance from central monitoring locations (i.e., Facility Operations Centers) of maintenance and operations of equipment (e.g., electrical, mechanical, fire/life safety) and understands risks or impacts to other subsystems across the data center., • Quickly responds to and supports site/campus incident response team for all abnormal conditions that impact operations, and coordinates with the team to perform corrective repairs, without supervision., • Works with site/campus leadership to gather necessary information and creates incident timelines/data, root cause analyses, and/or action items following an abnormal condition as required., • Develops new or follows preexisting emergency operating procedures (EOPs), methods of procedure (MOPs), standard operating procedures (SOPs), and digital methods of operating procedures (DMOPs) to support site operations and incident response., • Work with the Construction & Project team to ensure ServerFarm Data center’s site meets all required statutory and mandatory requirements., • Ensure all site MEP infrastructure operates within defined capacity standards., • Work with peers in global structure to coordinate all processes and align as appropriate., • Support Change, Incident Management, and Problem Resolution process for area of responsibility. Ensure this process covers all work., • Work with site/campus leadership to develop and grow talent within the team., • Supports site/campus team in all major and minor project works., • Work with site/campus leadership to ensure healthy and safe working conditions., • Ensure MEP activities are completed as required to meet the needs of peer groups and business objectives., • Provide all necessary site Operational support to site Construction activities ensuring these projects are completed within agreed timeframes and without disruption to Data Center Operations.Required Skills, • Associate degree or technical trade certification (e.g., military, trade school), or Journeyman level training AND 5+ years of experience in mission-critical services (e.g., high-availability assembly/manufacturing/critical infrastructure environments such as data centers, oil and gas refineries, hospitals, pharmaceutical, manufacturing, or related fields), • Familiar with the use of Microsoft Office applications., • Good communication skills, both written and verbal, • Committed to the delivery of excellent customer service. Self-motivated delivery of admin tasks Self-motivated, ability to work on own initiative. Punctual and reliable. Ability to work under pressure, with changing, and often conflicting, priorities to meet deadlines. A team player, able to work with SFR staff of all levels. Able to make sound decisions when needed. Able to work independently for long periods.

CenterPoint Energy and its predecessor companies have been in business for more than 150 years. Our Vision: Our vision is to become the most admired utility in the United States through the execution of our long-term growth strategy. We have an unwavering commitment to safely and reliably deliver electricity and natural gas to millions of people. Our Commitment: CenterPoint Energy is committed to creating an inclusive work environment where business results are achieved through the skills, abilities and talents of our diverse workforce. At CenterPoint Energy, individuals are respected for their contributions toward our company objectives. We strive for an inclusive work environment across all levels that is reflective of the available workforce in the communities we serve. Job Summary You will have the ability to provide engineering and technical support services associated with the design, construction, and operation of CenterPoint Energy's overhead & underground distribution system.Essential Functions Review and analyze customer submitted site plans, structural drawings, electric one-lines, schematics, and load analysis. Design underground facilities for electric service. Prepare cost estimates and Terms & Conditions packages for electric service to customers. Inspect customer required construction to approve/disapprove. Prepare work orders, easement documents, agreement letters and operational agreements. Perform cable pull analysis, protective device coordination studies, motor start and fault current calculations. Interpret and apply applicable codes and standards (i.e. National Electric Safety Code, National Electric Code, etc.). Support the construction, operations and maintenance of the distribution system through communication with field personnel and customers. Gather and analyze data, prepare written reports, give oral presentations related to distribution systems. Prepare new or revise engineering/technical specifications. Manage multiple projects involving customers, contractors and internal departments. Education Description Requires a Bachelor of Science degree in an Engineering Technology from an accredited college or university or, sixty hours of credits in an engineering discipline and at least 1 year of on-the-job technical experience in an engineering or electric utility environment.Experience 2 years' experience in construction, utility operations, utility support roles, or related industry experience. Able to use mathematics, including trigonometry and calculus, to complete complex engineering design calculations and relate mathematical solutions to actual utility situations. Able to interpret, analyze and produce electrical models, drawings and technical documents. Able to apply knowledge of electrical theory and system operations to daily decisions. Able to make informed decisions, follow procedures and comply with policies based on the knowledge of the work and the services provided by CenterPoint Energy. Able to calculate system short circuit quantities using sequence networks. Physical Requirements Working Conditions We want you to know Being a part of the CenterPoint Energy team is more than a career alone. It's an opportunity to make a positive impact. You will be an integral part of enabling everyday life and the pursuit of possibilities for the customers we serve and the communities we share. The vital services we provide are at the core of making our world work, and by sharing your energy with us, we'll create a better tomorrow together. What we bring to you * Competitive pay * Paid training * Benefits eligibility begins on your first day * Transit subsidies * Flexible work schedule, paid holidays and paid time off * Access to discounts at fitness clubs and an on-site wellness center at our headquarters in Houston * Professional growth and development programs including tuition reimbursement * 401(k) Savings Plan featuring a company match dollar-for-dollar up to 6% and a company contribution of 3% regardless of your contribution Job Type:Full Time Posting Start Date: 04/02/2026 Posting End Date: 04/17/2026 This contractor and subcontractor shall abide by the requirements of 41 CFR * 60-1.4(a), 60-300.5(a), and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability. #LI-CNP

Job Description University of St. Thomas Adjunct Faculty Network Technology The University of St. Thomas (UST), a private Catholic University committed to the liberal arts and the religious and intellectual tradition of Catholic higher education, with its main campus near the vibrant Houston central business district, Texas Medical Center, and museum district, is inviting applications for the position of Adjunct Faculty Network Technology, Associates of Applied Sciences Program. The position will report to the Dean of the Associates Program. General Description: The position requires a faculty member with experience in Computer Information Technology and /or Network Security. The teaching faculty will provide learning activities and support the course objectives that aim to recognize the type of network designs appropriate for OSI (open system interconnection) models, security, and networking protocols. Adjunct faculty are hired in a part-time capacity on a semester-by-semester basis, contingent upon the needs of the online program. Responsibilities: • Plan, develop, and teach courses within the curriculum in a manner that facilitates student learning, • Utilizes a course syllabus for each course, following established institutional guidelines, • Meets with and advises students either before or after class or by appointment, electronic communication, or other appropriate methods, • Teaching assignment may include some evening and/or weekend hours, • Evaluates students to measure their progress in achieving course objectives and informs students in a timely manner of their progress, • Maintains professional relationships with students, colleagues, and the community, • Attends meetings, trainings, and orientations as required Knowledge, skills, and abilities: • Mastery of course content, • Effective classroom technique and skills, • Demonstrated leadership skills and style that emphasizes collaboration, teamwork, and facilitation, • Excellent oral and written communication skills, • Positive interpersonal skills with a service orientation, • Commitment to diversity with the ability to appreciate alternative viewpoints, • Ability to work effectively with a wide variety of people, • Demonstrates interest in interdisciplinary teaching, service learning, learning technologies, course development, and adult learning methodologies including collaborative learning, learning communities and distance learning, • Ability to use effective strategies to engage students in their learning, • Demonstrated intermediate proficiency level working with Word, Excel, and PowerPoint software Education and Experience Requirements: • Masters degree in computer science, computer information systems, computer information technology, computer engineering, computer-based information systems or business/computer related field (e.g., computer management, decision engineering, or electrical engineering) required., • Minimum of 18 hours of graduate work in the technology field., • Minimum of 3 years non-teaching work experience in the related field or industry certification(s)., • Strong consideration will be given to candidates with an equivalent combination of work and teaching experience that provides the knowledge, skills, and abilities required of the position. The University of St. Thomas is an Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Why The Morgan Group? At The Morgan Group, we are more than our 70+ multifamily properties — we are a community built on people. We believe in treating everyone with respect and dignity, from our team members and partners to our residents, clients, subcontractors, and vendors. We strive to foster an inclusive environment where every idea, perspective, and contribution is valued, and where everyone feels heard and appreciated. Our Core Values are the foundation of our success — they guide how we hire, reward, and evaluate every member of the Morgan team. Morgan Core Values We are Self-Starters • In it to win it, • We take initiative, • We are team players, • We are inclusive, • We are reliable, • We seek excellence, • We learn from our mistakes, • We strive to improve, • Embrace challenges & be optimistic, • We are resilient, • Choose positivity, • Do the right thing, • We are honest and have high integrity, • We make good decisions, • Our future depends on it We attract and retain top talent by offering full-time team members a comprehensive range of benefits designed to support their well-being and success: • Advancement opportunities, • Training, • Low-cost Medical, Dental, Vision, • Flexible Spending Accounts (Medical, Limited Purpose), • Health Savings Account, • Voluntary Life Insurance, • Long-Term Disability Insurance, • Company Paid Life Insurance, • Company Paid Short-Term Disability Insurance, • 401K (Traditional & Roth) with Company Match, • Employee Assistance Program, • Paid Time Off plans including:, • Vacation, • Sick, • Floating Holiday, • Bereavement Leave, • Holiday Schedule, • Referral Bonus Program, • Quarterly Bonus Program How does Morgan Group benefit you? Joining Morgan Group means more than just a job — it’s a chance to learn, grow, and build a career you’re proud of. From property management and maintenance to construction and development, we provide the tools, training, and team support to help you reach your full potential. What You'll Do Essential Job Functions: • Adhere to MORGAN’s Maintenance, Emergency Procedures, Leasing and Marketing, Management and Operations, manuals along with the Team Member Handbook., • Supervise a team of qualified and trained Team Members who perform their jobs safely and provide customer service., • Monitor building systems, fire, electrical, security, elevators, etc. Report all unsafe areas to Community Manager., • Constantly inspect the community and report hazards to the Community Manager., • Conduct all work in compliance with OSHA and the MORGAN Operations manual., • Maintain a workplace that adheres to safety standards. Train all Team Members on safety procedures., • Maintain flammable and hazardous materials in a safe and secure area. Responsible for having SDS on all chemicals., • Supervise all outside contractors and inspect work for quality and safety., • Maintain all common areas., • Maintain a preventive maintenance program for all building interiors and exteriors including pools, fitness equip. HVAC systems, lighting, etc., • Respond to all service requests within 24 hours. Ensure that all service requests are completed correctly and in a timely manner., • Ensure that all vacant units are market ready within 7 days., • Maintain a proper inventory of tools and supplies to maintain property and consistent with property budget., • Maintain a safe and secure area for property tools and supplies by keeping the area neat and organized on a daily basis., • Comply with all training requirements set forth for this position. Other tasks as assigned by your supervisor, not listed as essential job functions. Physical Requirements: • Will need to be on feet (66% to 100%)., • Will need to perform the following physical activities (66% to 100%). Example: Bend/stoop/squat/kneel Perform routine maintenance/repair duties such picking up debris. Climb stairs Routine duties require access to upper floor apartments and interior apartments with multiple levels. Will need to climb and work off a ladder. Push or pull Move equipment, appliances, and open/close doors. Reach above shoulders Perform routine maintenance repairs, paint, stock, and remove equipment. Grasp/grip/turning and finger dexterity Handle maintenance tools, nails, and open/close ladders, perform routine maintenance/repairs, use telephone, pager, 2-way radio. Vision Requirements: • Must be able to complete forms, review reports and enter data on the computer., • Will need to observe areas needing attention/correction., • Read cautionary labels, respond to written instructions from staff., • Constant requirement to give information and receive instructions from residential management (33% to 66%)., • There may be an occasional need to utilize personal transportation to pick up replacement parts and supplies from vendors (1% to 33%)., • Ability to be on-call and be on the property on short notice., • Constantly outdoors, in all weather conditions, often for extended periods of time (66%-100%)., • Frequently indoors in all weather conditions that may make the environment uncomfortable (hot in summer, cold in winter). (33% to 100%), • Occasional exposure to paint fumes, solvents adhesives, etc. (33% -100%). Example – apartment during painting and/or immediately during or after turnover. Team Member must wear Personal Protective Equipment (N-95 Mask), rubber gloves and eye protection, when necessary., • Occasional need to work in awkward confining positions (1% to 33%).

Job Description Position Overview The Sr. Mechanical Engineer will apply their professional and technical expertise to designing mechanical engineering concepts and options that align with the owner’s vision for each project. This individual should have a comprehensive understanding of the consulting engineering process and the contractual documents which are involved. Responsibilities • Determine the scope of assigned projects and utilize software programs to create the mechanical engineering designs including HVAC and other mechanical systems., • Managing all business aspects of multiple concurrent projects, review accuracy of contact documents and ensure financial targets are met while maintaining established quality standards, • Define appropriate project scope, establish budgets, cost estimates and project schedules to write proposals. Develop and follow work plans and manage the design process to the available hours in the work plan, • Act as the liaison with the customer and project staff to properly identify and process scope changes, address issues, communicate regarding project milestones, etc., • Proactively manage any possible scope of work variances to ensure client satisfaction and that projects stay on track. Respond to RFI’s and accurately review submittals, • Manage project related correspondence and documents through designated document management systems, • Perform engineering studies and design analyses to determine cost-effective system layouts, quantities/sizes, and specifications, also verify code compliance of the system designs., • Supervise and mentor select assistant project managers and project design engineers on the project team., • Preparation and layout of BIM drawings and coordination with all other disciplines at all phases of project production, including schematic design phase, design development phase, permitting phase, and construction documents phase., • Perform construction administration tasks including, but not limited to, site observations, shop drawing review, and preparation of punch lists., • Actively maintain excellent business relationships and communication with clients, partners, architects, owners, other design and construction professionals, and various code officials regarding the overall engineering project, associated assignments, and action items., • Assists in the development of proposals and presentations to clients., • Candidates must be authorized to work in the United States and based in Houston, TX., • Bachelor’s Degree in mechanical engineering., • Seven (7) or more years of experience in mechanical engineering management and design of commercial buildings preferably in aviation, higher education, health care, hospitality, entertainment, or governmental facilities., • Licensed Professional Engineer (PE); engineering registration should be in the state(s) in which the employee resides and projects will be constructed., • Must have a thorough understanding of principles, methods and techniques of mechanical engineering, corporate and industry practices, processes and standards and their impact on project activities., • Minimum 5 years of experience leading and coordinating multi-discipline engineering teams., • Experience with a variety of project deliverable methods including design-build, design-bid-construct, fast-track and other construction delivery methods., • Knowledge of local, state, and national codes, including other aspects of laws, regulations, and potential liabilities affecting the practice of engineering., • Revit MEP proficiency required, and familiarity with other engineering software programs., • Highly proficient technical/computer skills including Microsoft O365 (Outlook, Work, Excel), internet and web applications., • Excellent communication, interpersonal, and presentation skills; ability to clearly convey information, ideas, and concepts verbally, written, or in graphic form., • Ability to prepare original specifications for project systems and components, as well as complete project manuals with sub-consultant specifications when the company serves as the prime professional., • Must have the technical knowledge and hands-on experience to effectively evaluate various mechanical engineering options for configuration of equipment and components., • Strong conflict management abilities — a good listener, committed to finding solution to problems, works to address difficulties., • Comfortable maintaining professional relationships with clients, vendors, code officials, etc. Works well with internal and external teams, promotes a positive image of the company, strives to solve issues raised by customers., • Meets deadlines, works independently or as part of a team, accountable, maintains focus on set objectives and goals., • Keeps information organized and accessible, manages time well; uses resources efficiently, strives to reduce cost., • Exceptional attention to detail and thoroughness in deliverables and communications, maintains high-quality standards and follow-up., • Ethical, honest, and accountable; maintains confidentiality, handles sensitive information with discretion and professionalism., • Has a bias for action, seeks new opportunities, strives to see projects to completion., • Must have the ability to perform the necessary job-related functions with or without reasonable accommodation., • Travel up to 10–35% for site investigations and assessments, or client meetings., • Remain in a stationary position, often standing or sitting, for prolonged periods., • Work extended hours, evenings and weekends when necessary to meet business deadlines., • Regular use of office equipment such as a computer/laptop and computer screens., • Dexterity of hands and fingers to operate a computer keyboard, mouse and other computer components., • Ability to see differences between colors, shades and brightness., • Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)., • Competitive compensation and benefits package, • Flexible hybrid work options, • Flexible Time Off, • Generous paid holiday schedule, • Paid Parental Leave, • 401k plan with company match, • Employee perks and discounts, • Education assistance & professional development Equal Employment Opportunity VoltAir does not discriminate in recruitment, hiring, training, promotion, or other employment policies on the basis of any protected characteristics. All qualified applicants will receive consideration for employment without regard to age, race or color, religion, sex or sexual orientation, gender identity or expression, national origin, physical or mental disability status, pregnancy status, genetics, protected veteran status, or any other characteristic as protected by applicable federal, state, or local law. In addition, we make reasonable accommodation to the needs of disabled applicants and employees, so long as this does not create an undue hardship on the business or threaten the health or safety of others at work. If you need assistance in completing this application, notify .

Job DescriptionDescription: DEPARTMENT: Engineering REPORTS TO: General Manager/ Property Chief Engineer (property specific) STATUS: Non-exempt JOB SUMMARY The Lead Engineer is responsible for assisting with the operation, maintenance, service and repair of equipment as assigned. Directs and supervises the Maintenance staff as requested by Property Engineer and/or General Manager. Responsible for all day-to-day operations of the maintenance department and overseeing the successful completion of maintenance and daily assigned tasks. He/she is also responsible for participating in the preventative maintenance program, handling guest requests and other work orders as assigned. He/she is also responsible for performing the job in a safe and efficient manner and performing trade jobs, such as carpentry, painting, plumbing, etc. May require driving shuttle van when needed (property specific). QUALIFICATION STANDARDS Education & Experience: • Experience in a hotel or a related field preferred., • High School diploma or equivalent required., • Licensed in a trade preferred (plumbing, electrical, HVAC, carpentry, etc.)., • Must have a valid driver’s license for the applicable state., • Long hours sometimes required., • Heavy work - Exerting up to 100 pounds of force occasionally, and/or 50 pounds of force frequently and/or up to 20 pounds of force constantly to lift, carry, push, pull, or otherwise move objects., • Must be able to convey information and ideas clearly., • Must be able to evaluate and select among alternative courses of action quickly and accurately., • Must work well in stressful, high pressure situations., • Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary., • Must have the ability to assimilate complex information, data, etc. from disparate sources and consider, adjust or modify to meet the constraints of the particular need., • Must be effective at listening to, understanding and clarifying the issues raised by co-workers and guests., • Must be able to work with and understand financial information and data, and basic arithmetic functions., • Must be able to work unsupervised. Requirements: DUTIES & FUNCTIONS Essential: • Approach all encounters with guests and employees in an attentive, friendly, courteous and service oriented manner., • Maintain regular attendance in compliance with Avion Hospitality standards, as required by scheduling which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which include wearing the proper uniform and name tag when working (per brand standards)., • Comply at all times with Avion Hospitality standards and regulations to encourage safe and efficient hotel operations, • Train and supervise maintenance Engineering staff and coordinate all scheduling., • Provide direction the Engineering department as requested by General Manager and/or Property Chief Eng., • Ensure that all Engineering personnel fulfill their job functions appropriately., • Follow all hotel and departmental procedures and policies., • Report emergencies and unusual situations immediately., • Handle guest room maintenance requests in a timely fashion., • Demonstrate an attitude of cooperation and helpfulness at all times., • Assist with the operation, maintenance and repair of equipment., • Employees must, at all times, be friendly, courteous, and helpful to guests, employees and managers., • Change out light bulbs; perform preventative maintenance for guest rooms to include: vinyl repair, touch up paint, minor furniture repair, tub caulking, tile repairs, etc., • Perform preventative maintenance for ice machines, refrigerators, kitchen equipment, laundry equipment, HVAC, guestrooms, meeting rooms, the swimming pool and hot tub., • Perform plumbing repair, laundry equipment repair, preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request., • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings., • Point out and assist with eliminating safety concerns., • Do periodic property tours of garden and exterior perimeter for debris and trash removal; Check the lighting and irrigation periodically., • Complete all appropriate Engineering forms., • Assist with the set up of special meeting needs., • Complete assigned maintenance request forms daily., • Use proper two way radio etiquette at all times when communicating with other employees.

The Structural Fitter assembles structural framework, components and materials such as angle iron, I-beams and other steel components within our Englobal Fabrication and Instrumentation and Electrical (I&E) Integration Shop. Lay out, position, align and fit together fabricated parts of structural me

Our Senior Estimators lead various estimates for projects in the Renewable Energy Market including Utility Scale Solar, Energy Storage (BESS), and High Voltage. Experience in estimating, cost control and/or estimating experience related to Utility-Scale Solar, electrical, or other related constructi

Direct Counsel is representing an Am Law 100 firm seeking a Patent Prosecution & Litigation Technical Advisor with a background in Electrical Engineering or Computer Science. Support patent prosecution and litigation efforts related to electrical and software-based inventions.

LI-ST1 Qualifications: Bachelor’s Degree from accredited degree program with minimum of 12 years of General Construction experience as Mechanical, Electrical and Plumbing (MEP) Engineer, Superintendent, or related position including Professional Engineering and Trade specific work Minimum of 5 yea

You will be instrumental in leading Amazon RME towards World Class Maintenance. Bachelor's degree in Electrical or Mechanical Engineering, Engineering Technology, Reliability Engineering, or 2+ years of Amazon RME (BB/3P) Full Time Exempt experience. Amazon is an equal opportunity employer and does

Practical experience with electrical testing equipment and familiarity with manufacturing processes is a plus. System Analysis: Analyze electrical systems and circuits, perform calculations, and use simulation software to evaluate their performance and make necessary improvements. Collaboration: Col

Professional Engineer's License in Electrical Engineering preferred but not required. Substation Lead Design Engineer. Job Locations US-TX-Houston ID TX-6000 Category Engineering Type Full Time Work Location Remote.

Traveling Electrical Superintendent - Oil, Gas, & Chemical (OGC). Position Overview: As an Electrical Superintendent you will play a significant part in the success for Kiewit.

The Electrical Manager is responsible for overseeing all electrical aspects of utility-scale solar projects from design through commissioning and turnover. This role provides technical leadership, ensures compliance with contract and design requirements, and manages electrical scope execution, inclu

About the job Patents - Counsel (Electrical Engineering) $225,000-$315,000 Annually. Electrical Engineering degree (or equivalent).

Req BA in Electronics Engineering Technology or related & 2 yrs exp in an industrial environment. Trenton, NJ seeks Electrical Automation Engineer responsible for evaluating the electrical hardware & software necessary to meet the automation needs of production.

Moss' Solar Electrical Assistant Superintendents provide coordination, planning, and support to Superintendents, contractors, and craft activities on our large utility solar projects. SOLAR ELECTRICAL ASSISTANT SUPERINTENDENT.

Experience with ETAP and other industry wide electrical system design tools, such as CAD 2D and 3D, electronic Cable Management Systems, etc. In this role, you will conduct field investigations and client interviews to determine work scope and cost estimates for a project's electrical engineering as

With 19 years of experience and hundreds of million-dollar projects completed, Hays Electrical Services delivers high-quality electrical construction services for complex commercial and mission critical facilities. The Senior Superintendent is responsible for field leadership and on-site management

POSITION SCOPE AND ORGANIZATIONAL IMPACT Moss' Solar Senior Electrical Superintendents plan, schedule, organize and direct the construction of major solar projects. Budget and schedule reporting Supports Project Executive in project change discussions Front end/design involvement Oversees interna

Experienced Electrical Engineering / Scientist Grant Writer (Remote) - IndeedJob Openings Experienced Electrical Engineering / Scientist Grant Writer (Remote) - IndeedAbout the job Experienced Electrical Engineering / Scientist Grant Writer (Remote) - IndeedWe are seeking a highly skilled Technical

Minimum 3 years experience in a commercial, industrial, or solar electrician journeyman capacity with thorough understanding of electrical equipment, high and low voltages, electrical theory, power generation, switchgear maintenance and paralleling procedures. The Electrician position demands the ab

We are seeking a mid-level associate to join our Electrical Engineering and Computer Science Patent Prosecution Practice Group. The ideal candidate will possess at least 3 years of relevant experience in patent preparation and prosecution and hold a degree in electrical engineering, computer enginee

The Corporate Electrical Reliability Manager oversees the electrical reliability program across North American. Comprehensive understanding of electrical systems in an industrial manufacturing context. Proficiency in electrical reliability principles, Safety Instrumented Systems (SIS) management,.

Job Description Job Details Level Experienced Job Location Houston, TX Position Type Full Time Job Category Service/Maintenance Description Our national multi-family management company seeks an experienced Service Manager with a "Whatever it Takes" attitude to be responsible for overseeing the physical property, general maintenance repairs, and apartment make-ready, preventative maintenance, and construction/rehabilitation projects for an apartment community. The Service Manager oversees the maintenance staff and leads by example and must be available to handle groundskeeping and/or pool duties, as needed. JOB SUMMARY Along with the Community Manager, the Service Manager is responsible for overseeing the physical property, general maintenance repairs, and apartment make-ready, preventative maintenance, and construction/rehabilitation projects for an apartment community. The Service Manager oversees the maintenance staff and leads by example and must be available to handle groundskeeping and/or pool duties, as needed. REPORTS TO: Community Manager and Regional Maintenance Supervisor SUPERVISES: Under direction from the Community Manager, supervises all maintenance personnel, including housekeeper. ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. 1. Under the direction of Community Manager, supervises, trains and schedules maintenance activities for apartment community and maintenance staff., 2. Coordinate, schedule and respond to resident/management requests and work orders for occupied units., 3. Coordinate, schedule and prepare vacant apartment units for move-in., 4. Coordinate and schedule appropriate safety and skills training for maintenance employees., 5. Identify and correct hazardous property conditions that could place the property in a liable position., 6. Ordering supplies and managing maintenance budget., 7. Coordinate, schedule, and perform preventative maintenance on equipment and units. Qualifications REQUIRED EDUCATION AND TRAINING DEGREES AND DIPLOMAS High school diploma or equivalent. Five years of multi-family experience or equivalent combination of education, training and experience that demonstrates the ability to perform the duties of this position. TRAINING/CERTIFICATES/ASSOCIATION MEMBERSHIPS EPA Section 608 (HVAC/Freon Recovery certification) required. Certifications/Permits required City or State to perform job responsibilities required. Training in boiler repair, plumbing and mold detection/resolution required. Certified Apartment Maintenance Technician (CAMT) preferred. Certified Pool Operator (CPO) required. KNOWLEDGE, SKILLS AND ABILITIES Must be able to handle plumbing repairs, tile work, HVAC equipment, appliance repair, carpentry repairs, electrical repair and all facets of apartment make-ready. Must be able to operate common maintenance related tools including but not limited to: key machine, augers, lead detector, ampere meter, volt meter, recovery machine, manifold gauges, charging cylinders, steam clean/shampoo machine, spray paint rig, electric saws, cordless screwdriver, drill, air conditioners, boiler, water heaters, chlorine test kit, various screwdrivers, nut drivers set, pliers, various wrenches, wire crimping/stripping tool, diagonal cutter, drill bits, hammers, tape (ruler), tube cutter (copper), soldering torch and ladders. Must be able to apply common sense and understanding to carry out instructions and plans. Will interact regularly with residents, vendors, contractors, all levels of employees, and Clients and, therefore, must possess excellent interpersonal skills. Must be able to read and write in English in order to read diagrams, meters, instructions, write report, etc. Proficiency in using property management software(s) and Microsoft Office. Experience in compressor diagnosis, fire sprinklers and irrigation systems preferred. Must have basic knowledge of OSHA Requirements and Local, City and State Ordinances. Must supply own hand tools. #ZR

Job DescriptionHVAC Technician Job Summary Installs, maintains, and repairs light commercial heating, ventilation, air conditioning, and refrigeration (HVAC-R) systems. General Accountabilities Inspects HVAC-R systems. Performs regularly scheduled maintenance on HVAC-R systems. Installs HVAC-R systems. Diagnoses and correct problems in HVAC-R systems. Tests electrical circuits and components for continuity. Tests pipe or tubing joints and connections for leaks. Joins pipes or tubing to equipment and to fuel, water, or refrigerant source. Reassembles and tests equipment following repairs. Repairs or replaces defective equipment, components, or wiring. Obtains and maintains required certifications. Installs, connects, and adjust thermostats, humidistats and timers. Complies with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area. Inspects and tests HVAC-R systems to verify system compliance with plans and specifications and to detect and locate malfunctions. *The company reserves the right to add or change duties at any time. Job Qualifications Education: Completion of HVAC or HVAC-R training or apprenticeship program Experience: Appropriate certifications and/or licensures with 1-2 years of related experience Skills Service orientation Equipment maintenance Installation Quality control analysis Troubleshooting Operation monitoring

Job Description Building Engineer | Commercial Office Buildings Houston, Texas | Central Location ***Must have pneumatic HVAC control systems experience. Position Summary The Building Engineer is responsible for the operation, maintenance, and repair of building systems, equipment, and grounds for commercial office properties. This role helps ensure the property remains safe, efficient, and well maintained while providing excellent service to tenants and support to property management. Responsibilities • Follow all applicable codes, regulations, and government agency requirements., • Perform preventive maintenance on mechanical, electrical, plumbing, and HVAC equipment., • Inspect building systems, including fire alarm, HVAC, and plumbing systems., • Complete work orders and service requests from tenants in a timely manner., • Respond to tenant requests and complaints and provide follow up as needed., • Monitor and maintain records for all Fire and Life Safety inspections and related items., • Maintain tools and order supplies needed for repairs and installations., • Keep accurate logs, document repairs, close work orders, track time, and provide consistent communication to the Property Manager., • Perform general repairs, including electrical, carpentry, plumbing, gate repairs, and locksmith work as needed., • Assist with budget preparation by providing maintenance and repair information., • Perform other duties as assigned. Qualifications • 3 or more years of experience as a Building Engineer., • High school diploma or equivalent required., • Ability to troubleshoot pneumatic HVAC control systems and digital BAS systems., • HVAC or refrigeration trade experience is a plus., • Familiarity with chillers, cooling towers, air handlers, pumps, valves, heating and ventilation systems, and gate operations., • Strong organizational skills to manage preventive maintenance schedules, meter readings, and overtime air requests., • Working knowledge of Fire and Life Safety codes, systems, and procedures., • Locksmith experience, including familiarity with BEST lock systems., • Basic to intermediate computer skills, including the ability to run reports and manage access control, video surveillance, and BAS systems., • Knowledge of building electrical systems, including running conduit and troubleshooting basic electrical issues., • Electrician certification is a plus., • Familiarity with generator operations., • Knowledge of OSHA standards and local building codes., • Ability to build positive working relationships with tenants, owners, staff, and vendors., • Strong customer service skills, attention to detail, and ability to prioritize tasks. Physical Requirements • Must be able to climb ladders., • Must be able to walk multiple flights of stairs, including buildings over ten floors., • Must be able to lift at least 30 pounds.Company DescriptionProfessional Alternatives is a leading staffing firm specializing in all levels of corporate administrative and professional support, as well as executive placement. Starting in 1998, the Professional Search Group has a successful track record of providing local and national staffing-related support to a multitude of industries. We pride ourselves on building lasting relationships with each client and candidate, and our hands-on approach allows us to make the best long-term match for both.Professional Alternatives is a leading staffing firm specializing in all levels of corporate administrative and professional support, as well as executive placement. Starting in 1998, the Professional Search Group has a successful track record of providing local and national staffing-related support to a multitude of industries. We pride ourselves on building lasting relationships with each client and candidate, and our hands-on approach allows us to make the best long-term match for both.

Job Description Job Title: Transmission Line Engineer III Company: TOR Engineering Location: Phoenix, AZ Position Type: Full-Time (In-Office) Job Summary TOR Engineering is seeking a skilled and motivated Transmission Line Engineer III to support the design and project management of transmission and distribution (T&D) line projects for utility and commercial clients. Projects range from 4.2 kV to 500 kV and include structural analysis, conductor selection, and modeling using PLS-CADD. This role is ideal for an experienced engineer who is detail-oriented, customer-focused, and capable of leading projects while collaborating with internal teams. As part of a smaller, agile organization, you’ll have the opportunity to build direct relationships with clients and play a key role in project success. Note: This is a full-time, in-office position based in Phoenix, AZ. Field visits will be required, and company vehicles will be provided. Key Responsibilities • Develop engineering deliverables including:, • Plan & Profiles, • Primary & Conduit Diagrams, • Transmission Section Maps, • Structure & Framing Details, • Permitting Exhibits, • PLS-CADD models for overhead transmission lines, • Coordinate with sub-consultants across civil, structural, and related disciplines, • Prepare detailed Bills of Material, • Establish loading and clearance criteria, • Develop and review technical specifications for equipment and construction, • Review and approve contractor submittals and RFIs, • Perform QA/QC on engineering designs, • Conduct site visits to verify field conditions and compare with design documents, • Support proposal development, project scoping, scheduling, and budgeting, • Ensure designs meet National Electric Safety Code (NESC) and client standards, • Perform system analyses (lightning performance, circuit ratings, corona, losses, etc.), • Lead client communications, design reviews, and project updates, • Forecast and refine project cost estimates and cash flows, • Support business development and client relationship growth, • Bachelor of Science in Engineering (Electrical, Structural, or Mechanical) from an accredited university, • Minimum 4 years of experience in transmission and distribution (T&D) design, • Engineering in Training (E.I.T.) certification required, • Proficiency in PLS-CADD (required), • Working knowledge of CAD software, • Strong understanding of engineering design principles and project workflows, • Excellent verbal and written communication skills, • Ability to lead projects and collaborate effectively with cross-functional teams, • Flexible and adaptable to changing project requirements and client needs, • Self-motivated with strong problem-solving abilities, • Ability to manage multiple priorities and deadlines, • Experience mentoring or leading junior staff, • Competitive Medical, Dental, and Vision Insurance, • Complimentary Life Insurance, • Paid Time Off (PTO) starting from date of hire, • 401(k) with company match and profit-sharing TOR Engineering offers a collaborative and flexible work environment where your contributions directly impact project success. Our smaller team structure allows for faster decision-making, stronger client relationships, and meaningful career growth opportunities within the electric utility industry. Company DescriptionTOR Engineering Corporation, founded by the late Thomas O. Radnoti (TOR) in 1985, has been a trusted provider of electrical engineering services to utilities throughout the Southwestern United States and beyond. Based in Phoenix, Arizona, our legacy is built on a foundation of pride, professionalism, and a commitment to excellence. TOR specializes in Electrical Substation, Transmission, and Distribution Design ranging from service voltage up to 500kV. We handle everything from Substation additions and rebuilds to new Substation designs, comprehensive Transmission line projects, and extensive Distribution design work. In our new era of growth and innovation, we are continually improving our practices to better serve our clients. Our team of dedicated professionals is the driving force behind our success, fostering a collaborative environment where expertise and creativity thrive. At TOR Engineering, we are passionate about pushing the boundaries of what is possible in electrical engineering. We invite you to partner with us and be a part of our journey towards a brighter, more efficient future.TOR Engineering Corporation, founded by the late Thomas O. Radnoti (TOR) in 1985, has been a trusted provider of electrical engineering services to utilities throughout the Southwestern United States and beyond. Based in Phoenix, Arizona, our legacy is built on a foundation of pride, professionalism, and a commitment to excellence.\r\nTOR specializes in Electrical Substation, Transmission, and Distribution Design ranging from service voltage up to 500kV. We handle everything from Substation additions and rebuilds to new Substation designs, comprehensive Transmission line projects, and extensive Distribution design work.\r\nIn our new era of growth and innovation, we are continually improving our practices to better serve our clients. Our team of dedicated professionals is the driving force behind our success, fostering a collaborative environment where expertise and creativity thrive.\r\nAt TOR Engineering, we are passionate about pushing the boundaries of what is possible in electrical engineering. We invite you to partner with us and be a part of our journey towards a brighter, more efficient future.

Our services span from initial planning and investment, through start-up and operations. Job Summary: In this role, you will lead a team and manage daily operations in support of Custom Arc Services electrical craft personnel, leading the recruitment of union IBEW specialty electricians, development

Job Description • Perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems., • Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks., • Develop maintenance and testing procedures for electronic components and equipment., • Evaluate systems and recommend design modifications or equipment repair., • Evaluate project work to ensure effectiveness, technical adequacy, and compatibility in the resolution of complex electronics engineering problems., • Provide technical support or instruction to staff or customers regarding electronics equipment standards., • Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems., • Repair and design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities., • Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility., • Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations., • Perform detailed calculations to develop manufacturing, construction, and installation standards and specifications., • Direct the installation and testing of electrical equipment to ensure that products meet specifications and codes. Education Requirement: Engineering Degree - Mechanical in Electrical or Electronics Experience Requirement: Minimum of 5 year in relevant field Company DescriptionGlobal Marine Safety USA is a company of motivated and experienced safety industry professionals. Based out of Houston, GMS-America is subsidiary of Global Marine Safety, we have our presence all over the world. Our vision is to be an innovative leader in safety that exceeds industry standards while forming relationships built on quality and trust. Providing cost-effective and comprehensive solutions for fire, rescue and safety related marine services, we support and serve clients. Our quality is backed by accreditations and top safety bureaus around the globe.Global Marine Safety USA is a company of motivated and experienced safety industry professionals. Based out of Houston, GMS-America is subsidiary of Global Marine Safety, we have our presence all over the world. Our vision is to be an innovative leader in safety that exceeds industry standards while forming relationships built on quality and trust.\r\n\r\nProviding cost-effective and comprehensive solutions for fire, rescue and safety related marine services, we support and serve clients. Our quality is backed by accreditations and top safety bureaus around the globe.

Job Description Position Overview - Travel Required VantagePoint Alliance (VPA) is supporting multiple industrial and power-sector clients seeking experienced Electrical Design Engineers to lead development of facility power infrastructure from utility interconnection through substations, transformers, switchgear, distribution systems, and final connections to plant equipment, auxiliary systems, and facility lighting. This role is responsible for establishing and coordinating the plant electrical architecture across all project phases—from early concept development through detailed engineering, construction, commissioning, and startup. The position requires strong ownership of single-line diagrams and overall power distribution strategy supporting safe, reliable, and maintainable plant operation. Key Responsibilities • Lead development of electrical system design from utility interconnect through high-voltage, medium-voltage, and low-voltage distribution systems to end-use equipment., • Develop and maintain electrical single-line diagrams (SLDs) defining plant-wide power architecture., • Support electrical scope during FEL / conceptual design, detailed engineering, procurement, construction, and commissioning phases., • Specify and coordinate design of:, • Substations, • Transformers, • Switchgear (HV/MV/LV), • Motor Control Centers (MCCs), • VFD systems, • Protective relaying and metering, • UPS and backup power systems, • Harmonic filters and power quality equipment, • Facility lighting and auxiliary systems, • Interface with utilities on grid interconnection requirements and protection coordination., • Coordinate electrical scope with mechanical, controls, instrumentation, and process engineering teams., • Review vendor packages, equipment specifications, and construction deliverables., • Support FAT, SAT, commissioning, startup, and troubleshooting activities., • Ensure compliance with applicable industry codes and standards including IEEE, NEC, NFPA, and API where applicable., • Provide technical leadership to EPC partners, consultants, and internal engineering teams. Required Qualifications • Bachelor’s degree in Electrical Engineering., • 10–20+ years of experience in industrial, utility, power generation, or process plant electrical design., • Demonstrated experience developing plant electrical systems from utility interface through distribution to connected loads., • Experience preparing and coordinating single-line diagrams for facility power systems., • Strong background in medium-voltage and low-voltage power distribution design., • Experience specifying and integrating:, • Substations, • Transformers, • Switchgear, • MCCs, • Motors and drives, • Protective relaying systems, • Familiarity with electrical studies such as:, • Load flow, • Short circuit, • Arc flash, • Coordination, • Harmonic analysis, • Experience working with EPC contractors, Owner’s Engineers, or operating facilities., • Working knowledge of commissioning and startup practices. Preferred Qualifications • Professional Engineer (PE) license., • Experience supporting utility interconnection studies or coordination., • Background in power generation, petrochemical, chemical processing, hydrogen, renewables, or heavy industrial facilities., • Experience with modular plant or balance-of-plant electrical systems., • Familiarity with ETAP, SKM, EasyPower, or similar analysis software. Typical Project Environments Projects may include: • Power generation facilities, • Chemical and petrochemical plants, • Hydrogen and electrochemical processing facilities, • Industrial manufacturing plants, • Data centers and mission-critical infrastructure, • Utility-connected energy facilities, • Renewable and grid-support infrastructure Why This Role Matters This position plays a critical role in defining the electrical backbone of complex facilities by translating utility power into safe, reliable plant-wide distribution systems supporting everything from major rotating equipment to instrumentation loads and facility lighting through coordinated single-line architecture.

Job Description We are seeking a highly skilled Electrical Controls Technician to join our team in a dynamic industrial manufacturing environment. The ideal candidate will bring proven hands-on experience, strong troubleshooting abilities, and a commitment to safety and quality. Qualifications & Requirements • Minimum 5 years of experience as an Electrical Controls Technician in an industrial manufacturing facility., • Proficient in English (Spanish is a plus)., • High integrity with adherence to company guidelines, business ethics, and safety standards., • Strong commitment to working injury-free and maintaining the highest health and safety standards., • Proficient in installation, commissioning, troubleshooting, analysis, and repair of electrical and control systems, including:, • Motors, MCC’s, VFD’s, relays, PLCs, overhead crane controls, control valves, controllers, and HMIs., • Mechanical aptitude to distinguish between mechanical and electrical issues, with ability to replace mechanical parts as needed., • Experience with automated sandblast systems., • Knowledge of NFPA 70E, NEC, and OSHA standards., • Medium Voltage (230/480 3-phase VAC) troubleshooting and repair., • Electrical License (preferred). Demonstrate strong troubleshooting, problem analysis, decision-making, and conflict management skills, especially under pressure. * Troubleshoot and repair: * Automation roll-forming equipment, punch presses, metal straightening equipment. * Powder coat paint booths, gas ovens, heated phosphate cleaning systems. * Overhead and jib cranes, automated sandblast equipment, welding equipment. * Install and repair electrical conduit and wiring circuits in compliance with NEC guidelines. * Perform transformer maintenance and testing. * Maintain, troubleshoot, and repair three-phase motors. * Preventive maintenance, troubleshooting, and repair of screw air compressors. * Troubleshoot control feedback systems (encoders, laser measurement devices). * Maintain and repair hydraulic and pneumatic systems. * Configure and troubleshoot PLCs, HMIs, VFDs (AC/DC), and analog circuits (0–10 VDC, 4–20 mA). * Troubleshoot and repair gas ovens and controllers. * Read and interpret electrical diagrams, schematics, and engineering instructions, and troubleshoot without prints when necessary. * Identify and resolve equipment malfunctions, working with manufacturers and field representatives to source replacement parts. * Maintain cost consciousness while prioritizing quality repairs. * Ensure good housekeeping and safe working practices in all work areas. * Execute and document preventive maintenance procedures and identify potential future failures.

Job Description Job Description: Telecommunication Engineer – Contract Instructor Virtual Lead or In-Person Employment Type: Contract Location: Remote or On-site (This is a traveling position across the United States depending on the job.) Department: Technical Training & Engineering Development Overview Seeking an experienced OSP‐focused Telecommunications Engineer to serve as a Virtual Lead Instructor. You’ll deliver advanced technical training, guide hands‐on labs, and mentor new and experienced engineers in core OSP engineering concepts and industry‐standard design tools. Key Responsibilities • Lead live virtual training sessions on OSP engineering fundamentals, design workflows, and tool‐based applications., • Deliver structured instructions on:, • Introduction to OSP Engineering, • Fiber Basics, • Granite Error Resolution, • ARAMIS‐DT (Parts 1 & 2) Cooper Design for OSPE, • O‐Calc Pro, • Demonstrate virtual or leader lead, and real‐world engineering exercises., • Assess learner progress, provide coaching, and support skill development., • Maintain and update training materials to align with current engineering standards., • Collaborate with SMEs and curriculum teams to refine course content., • Troubleshoot learner issues related to software, workflows, and design logic., • OSP Engineering background: fiber routing, splicing, cable selection, network architecture., • Proficiency with Granite, ARAMIS‐DT, Cooper Design for OSPE, and O‐Calc Pro., • Ability to explain complex engineering concepts clearly to mixed‐experience audiences., • Prefer experience delivering virtual training or leading technical workshops or mentoring engineering teams., • Excellent communication, presentation, and facilitation skills., • Familiarity with NESC standards and utility construction practices (preferred). · Prefer equivalent telecom engineering experience and/or electrical engineering. • 2+ years in telecom engineering preferred, OSP design, or related technical fields., • Prior instructor, trainer, mentor, or technical lead experience preferred. You’ll shape the next generation of OSP engineers—building their practical skills, tool expertise, and readiness to support modern fiber network deployment.

Job Description TSR is seeking a Sr. Electrical & Instrumentation Designer to work with one of the largest EPC firms in the country. This is a long-term contract position located in LaPorte, TX. Under general supervision, you will independently apply advanced engineering techniques, make decisions on engineering problems and methods, and represent the organization in conferences to resolve important questions or to negotiate with key engineers and officials of other organizations. This position is assigned to a client site in LaPorte, TX. Work will be performed full time at site. No relocation or per diem will be offered. RESPONSIBILITIES • Responsible for design for electrical systems and components for heavy industrial facilities in the Power, Chemical or Refinery industries, • Responsible for preparing design and detail drawings for installation of electrical systems and equipment including motors, controls, panels and wiring, starting and protective devices, substation and distribution circuits, and cable tray and conduit routing, • Assist in conducting Electrical reviews of all project packages prior to RFC to ensure that quality procedures were followed, • Review project design estimates and work scopes for new project REQUIREMENTS • Minimum 5 to 15 years of applicable industry electrical design experience within the chemical and industrial industry, • Experience in communicating job packages/projects with construction and plant personal., • Experience in specifying vendor instrument equipment and reading vendor manuals., • Have a working knowledge of the NEC Codes., • Experience in voltage drop calculations, wiring sizing and conduit fill calculations., • Experience in creating and modifying P&I diagrams, loop sheets, single lines, logics, and electrical schematics., • Experience in 24kV to 480-volt power distribution systems, lighting, schematic wiring diagrams, cable / raceway sizing, lightning protection, and grounding required, • Experience in developing scopes of work, task analysis, material list, and project schedules, • Proficiency with 2D MicroStation or AutoCAD is required., • Experience in Microsoft (Outlook, Word, Excel, etc.is required. PHYSICAL REQUIREMENTS • Work is located at a chemical plant and requires exposure to ambient temperature extremes, • Work may require using and wearing personal protective equipment such as fire-retardant clothing, hearing and eye protection, hard hat, and steel-toed boots, • Day-to-day physical requirements involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively, lifting and carrying less than 20 lbs. frequently, etc., • Work requires moderate physical exertion including walking to operating areas and walking up stairs, • May require walking the project property Company DescriptionTechnical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.Technical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.

Job Description Part-time and full-time opportunities available! About CCS CCS Facility Services is one of the largest building service contractors in the United States, providing expert janitorial and facility engineering services to thousands of commercial businesses with a deep bench of experienced cleaning and engineering professionals. Guided by a Service Heart we are a company Built to Serve with a passion to exceed our customer’s expectations. Job Details: A Janitor is responsible for keeping the workplace clean, organized, and disinfected. The requirements listed below are responsibilities and skill requirements. Essential Duties and Responsibilities: • Clean the interior of buildings, including floors, carpets, rugs, windows and walls, and general tasks., • Vacuum, sweep, and mop floors. (Offices, rooms, hallways, lobbies, lounges, elevators, stairs, locker rooms, and other work areas)., • Cleaning stains from chairs and upholstered furniture., • Keep furniture free of dust. As well as lighting fixtures, marble surfaces, and moldings., • Leaving empty trash cans, as well as cleaning trash cans and ashtrays., • Disinfect commonly used items such as desks, door handles, office tools, and phones., • Clean and maintain restrooms, as well as replenish supplies in this area and where required., • Washing and cleaning windows and mirrors., • Empty trash and recycling containers to the disposal area., • Clean trash and snow from sidewalks if necessary., • Maintain the inventory of cleaning supplies in stock and, if applicable, request missing materials from your supervisors., • Notify supervisors of unsafe conditions or conditions requiring maintenance., • Maintain a cleaning chart indicating the areas that were cleaned and inspected., • Follow safety and precaution rules., • Must be able to lift up to 50 pounds., • Close doors at the end of the night shift. Competencies: To perform the job successfully, an individual should demonstrate the following competencies: • Attendance/Punctuality- Is consistently at work and on time., • Dependability- Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan, • Safety and Security- Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly Work Environment: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions, • While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and risk of electrical shock and vibration., • The noise level in the work environment is usually moderate CCS Facility Services business foundation is our people. We recognize, invest, and promote from within. Unified by our core values, you will discover a sense of community of amazing colleagues who are passionate and guided by a Service Heart to provide the best employee and customer experience. Acerca de CCS CCS Facility Services es uno de los proveedores de servicios para edificios más grandes de los Estados Unidos, que brinda servicios de limpieza e ingeniería de instalaciones y edificios a miles de empresas comerciales con un amplio grupo de profesionales experimentados en limpieza e ingeniería. Guiados por un Corazón de Servicio, somos una empresa dedicada a Servir con pasión para superar las expectativas de nuestros clientes. Descripción del Puesto: Un Janitor es el encargado de mantener el lugar de trabajo limpio, organizado y desinfectado. Los requisitos enumerados a continuación son las responsabilidades y habilidades requeridas. Responsabilidades: • Limpiar el interior de edificios, incluidos pisos, alfombras, tapetes, ventanas, paredes y tareas generales., • Aspirar, barrer y trapear pisos. Oficinas, habitaciones, pasillos, vestíbulos, salones, ascensores, escaleras, área de lockers (locker room) y otras ares de trabajo., • Limpieza de manchas de sillas y muebles tapizados., • Mantener mobiliario libre de polvo. Así como accesorios de iluminación, superficies de mármol y molduras., • Dejar botes de basura vacíos, así como limpieza de botes de basura, papeleras y ceniceros., • Desinfecte artículos de uso común como escritorios, manijas de puertas, herramientas de oficina y teléfonos., • Limpiar y mantener los baños, así como reabastecer suministros en esta área y donde sea requerido., • Lavado y limpieza de cristales y espejos., • Vaciar contenedores de basura y reciclaje al área de eliminación., • Limpiar basura y nieve de las aceras en caso de ser necesario., • Mantener el inventario de suministros de limpieza en stock y en su caso solicitar materiales faltantes a tus supervisores., • Notificar a los supervisores sobre condiciones inseguras o que requieran mantenimiento., • Mantener un cuadro de limpieza que indique las áreas que fueron limpiadas e inspeccionadas., • Seguir reglas de seguridad y precaución., • Debe poder levantar hasta 50 libras., • Cerrar las puertas al final del turno de noche. Competencias: Para desempeñar el trabajo con éxito, un individuo debe demostrar las siguientes competencias: • Asistencia/Puntualidad: Está consistentemente en el trabajo y a tiempo., • Confiabilidad: Sigue instrucciones, responde a las directrices de la gerencia; Asume la responsabilidad de sus propias acciones; Cumple con los compromisos; Se compromete a trabajar largas horas cuando sea necesario para alcanzar los objetivos; Completa las tareas a tiempo o notifica a la persona adecuada con un plan alternativo., • Seguridad y Protección: Observa los procedimientos de seguridad y protección; Determina la acción apropiada más allá de las directrices; Informa sobre condiciones potencialmente inseguras; Utiliza el equipo y los materiales adecuadamente. Ambiente de Trabajo: • Las características del ambiente de trabajo descritas aquí son representativas de las que un empleado encuentra mientras realiza las funciones esenciales de este trabajo. Se pueden hacer adaptaciones razonables para permitir que las personas con discapacidades realicen las funciones esenciales., • Mientras realiza las tareas de este trabajo, el empleado ocasionalmente está expuesto a trabajar cerca de partes mecánicas en movimiento, vapores o partículas en el aire, productos químicos tóxicos o cáusticos, condiciones climáticas exteriores, riesgo de descarga eléctrica y vibración., • El nivel de ruido en el ambiente de trabajo suele ser moderado. Beneficios: La base del negocio de CCS Facility Services son nuestras personas. Reconocemos, invertimos y promovemos desde adentro de la organización. Unificados por nuestros valores fundamentales, descubrirá un sentido de comunidad con compañeros de trabajo que son apasionados y guiados por un Corazón de Servicio para proporcionar la mejor experiencia tanto para los empleados como para los clientes.

Job Description FPGA Design & Validation Engineer (Oil & Gas Systems) Houston, TX, USA As an FPGA Engineer in our Oil & Gas division, you will develop high-reliability digital systems for demanding environments, such as downhole drilling tools, subsea instrumentation, or refinery monitoring systems. You will leverage VHDL to implement complex data acquisition and signal processing algorithms that must operate under strict power and thermal constraints. A significant portion of this role involves hands-on lab validation to ensure system integrity before deployment in remote or hazardous field locations. Key Responsibilities: • Ruggedized Design: Implement synthesizable VHDL code optimized for low power consumption and high-temperature stability (e.g., surviving 150°ree;C+ for downhole applications)., • High-Reliability Validation: Lead hardware-in-the-loop (HIL) testing in the lab to simulate harsh field conditions. Utilize oscilloscopes, logic analyzers (ILA/SignalTap), and thermal chambers to verify timing and functional reliability., • Protocol Management: Develop and test custom and industry-standard communication bridges (e.g., Modbus, Ethernet/IP, CAN, or proprietary mud-pulse telemetry)., • Data Integrity: Design robust memory interfaces (DDR3/4) and error correction (ECC) for large-scale data logging during seismic or pipe inspection missions., • Certification Support: Maintain detailed documentation of testing protocols and validation results to support safety and industry compliance standards., • Perform functional and timing verification using respective simulators, • Conduct post-synthesis and post-layout verification. Work Experience Required Technical Skills • Language & Logic: Expert proficiency in VHDL; experience with high-reliability design techniques like triple modular redundancy (TMR) is a plus., • Tools: Expert-level use of Xilinx Vivado, Intel Quartus, Lattice FPGA or Microchip Libero., • Lab Expertise: Mastery of high-speed digital probing, power analysis (using tools like XPE), and debugging hardware-software interfaces., • Industry Interfaces: Experience with ADC/DAC interfacing (using JESD204B or LVDS) for high-precision instrumentation., • Education: B.E./M.Tech in Electrical, Electronics, or Instrumentation Engineering., • Experience: 3+ years in FPGA development, preferably with exposure to industrial automation, subsea electronics, or downhole tools., • Soft Skills: Strong analytical mindset for "root cause" debugging in complex, multi-disciplinary systems.

Job Description Job Title: Lead Core Stacking Technician Location: Houston, Tx 77042 Type: Direct hire Position Summary We are seeking an experienced Lead Core Stacking Technician to assemble transformer core components using precision-cut materials. This role requires strong attention to detail, the ability to follow technical instructions, and a commitment to quality. You’ll also help support training and process improvements as we ramp up operations. Key Responsibilities • Maintain a clean and organized work area, • Complete production and quality documentation, • Safely handle materials using cranes or lifting equipment, • Support training of new team members and share best practices, • Identify and fix defects such as misalignment or damaged parts, • Inspect materials and finished assemblies to meet quality standards, • Assemble transformer core components (yokes, legs) using pre-cut laminations, • High school diploma or GED, • 5+ years of manufacturing or assembly experience, • 3+ years of mechanical or precision assembly experience, • Ability to read technical drawings and use measuring tools (calipers, gauges), • Strong attention to detail and problem-solving skills, • Ability to lift up to 50 lbs and stand for long periods, • Experience in transformer or electrical equipment assembly, • Experience with tight-tolerance or precision builds, • Associate degree in a technical field (Electrical, Mechanical, Mechatronics), • Experience training others or supporting process improvements, • Overhead crane experienceCompany DescriptionBalance Staffing is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity Veteran status, or any other characteristic protected by federal or state law.Balance Staffing is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity Veteran status, or any other characteristic protected by federal or state law.

Job DescriptionProject Interface Coordinator – Communications and Security POSITION DESCRIPTIONMUST HAVE COMMUNICATIONS & SECURITY EXPERIENCE. Your responsibilities will encompass essential project and engineering management duties, emphasizing the establishment of an execution framework that aligns with interface management responsibilities, safety, and quality.Interface management/coordination in projects is crucial for ensuring that different components of a project work together seamlessly. It focuses on managing the interactions between various project scopes, which might include different systems, teams, or contractors. This includes: • Defining Interfaces: This involves identifying and defining the points of interaction between different components of the construction project, such as between electrical and mechanical systems or between construction phases., • Coordination and Communication: Ensuring that there is clear communication and coordination between different teams or systems that interact. This might involve regular meetings, detailed documentation, and the use of collaborative tools., • Resolving Conflicts: Interface management also includes resolving conflicts that arise from overlapping work or misalignments between different scopes of the project. This can involve mediation and adjustments to schedules or plans., • Documentation: Keeping detailed records of how interfaces are managed is important. This documentation helps in understanding the flow of the project and is crucial for resolving any disputes that may arise., • Lead the development of interface management strategy and plan, identifying, documenting, and closing out interfaces in a structured manner., • Define the approach to identifying, documenting, and closing out interfaces, ensuring an organized process., • Maintain the interface system of record and interface tables/matrices with the most current, accurate information regarding status of interface agreements and interface points., • Schedule and lead regular meetings and teleconferences to achieve alignment or enhance information sharing for each respective scope of interfaces., • The Interface Coordinator must work with the Fluor project team, Client, and external stakeholders to ensure that both internal and external interfaces are identified, addressed and appropriate procedures are integrated into the overall interface management plan., • Establish and maintain clear communication channels and protocols for each respective scope interface., • Schedule and lead regular meetings and teleconferences to achieve alignment and enhance information sharing., • Proactively initiate actions to expedite interfacing technical contacts and external stakeholders, • Collaborate with stakeholders to define interface requirements and expectations., • Present and explain interface management work processes to relevant internal and external stakeholders, including Fluor project teams, clients, licensors, EPC contractors, third parties, and government agencies.Minimum Qualifications:, • Candidate must be a U.S. Citizen., • Must have Communiations & Security experience., • EPC experience (Engineering, Procurement, and Construction)., • Ability to work in a diverse work environment., • Satisfactory results of a pre-employment screening, which includes a background check and drug screening., • Proactive and goal-oriented with the initiative to positively influence events., • Proficient in problem-solving, particularly in complex project or business environments., • Strong analytical skills and the ability to identify potential solutions., • Technical and business writing proficiency., • Basic computer and software skills, including word processing, email, spreadsheets, and electronic presentations., • Establish and maintain high standards of self-performance with responsibility and accountability for successfully completing assignments and tasks., • Set and maintain high standards for project interface management in terms of quality, timeliness, and overall success.Additional Considerations:, • International project or area management experience in diverse cultural environments is highly valued., • Emphasis on diversity and inclusion initiatives within engineering management.Preferred Qualifications:, • Seven (7) years of experience in a significant project role, demonstrating expertise in interface management, project controls, and design or construction engineering., • Successful track record as a Project Manager or Project Engineer on large or mega-sized engineering, procurement, fabrication, and construction/construction management (EPFC/CM) projects., • Certification in project management, such as Project Management Professional (PMP), is highly recommended. CONTRACT DURATIONOne (1) year with the possibility of extension/conversion.

Job DescriptionSalary: $17.58-$23.32 DOE Job Title: Tree Care Technician: Groundhand (Levels 14) Location: The Urban Foresters, Stafford, TX Branch Department: Operations Reports To: Foreman Role Objective The Groundhand is responsible for the safe and efficient management of the "Drop Zone." This role progresses from basic debris management to advanced technical rigging and heavy equipment operation, ensuring that tree removals and pruning are executed without injury or property damage. Core Responsibilities (All Levels) • Safe Zone Management: Maintaining a 360-degree awareness of the "Drop Zone" and "Chipper Zone.", • Equipment Maintenance: Daily cleaning, fueling, and basic "field-stripping" of power tools., • Debris Processing: Dragging, stacking, and feeding brush into the chipper using safe feeding techniques., • Communication: Utilizing standardized hand signals and voice-and-response communication with the climber. Qualifications • Physical: Ability to work outdoors in all weather and lift 75+ lbs., • Credentials: Valid Texas Drivers License., • Safety: Willingness to obtain EHAP (Electrical Hazards Awareness Program) and First Aid/CPR certification. What We Offer The Urban Foresters are committed to investing in our team. We provide the resources, support, and culture you need to thrive personally and professionally. • A competitive compensation structure that grows when you do., • Per-Diem for any out-of-town work., • Health, dental, and vision insurance., • Generous paid time off (PTO) and paid company holidays., • A significant investment in your professional development., • Access to our unique Dream Manager Program to help you achieve your personal and professional goals., • Financial wellness resources through SmartDollar from Ramsay Solutions., • A supportive, collaborative, and mission-driven team culture that values people first.

Job Description About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With multiple NASA lunar missions in development and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers, and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. Our long-term partnership with NASA has created an exciting opportunity for a Spacecraft Software Test Engineer on the JETS contract at the Johnson Space Center in Houston, TX. About the Position: If you’re excited about contributing to human space exploration and advancing our understanding of the universe, we’d like to hear from you. Join a team that values collaboration, diverse perspectives, and meaningful work. Your skills and ideas will help us design and deliver systems that support future space missions and create benefits here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA’s pursuits in deep space exploration. As NASA’s largest engineering solutions provider working together with NASA at centers across the United States. Responsibilities: • Decompose system-level requirements into software requirements and develop traceability matrices., • Design and develop C-based software interfaces between GFE and contractor-supplied modules., • Perform software interface analysis, integration testing, and formal verification activities., • Build, maintain, and execute test procedures and test reports for software systems., • Support full software development life cycle activities within an Integrated Product Team (IPT)., • Conduct unit testing, integration testing, and system-level software testing., • Develop and maintain software documentation in support of mission-critical, human-rated systems., • Collaborate with cross-functional teams to resolve software integration issues and risks., • Utilize IDE tools and web-based collaboration platforms (e.g., GitLab, JIRA, Confluence) for configuration management and project tracking., • Contribute to design reviews, test readiness reviews, and customer-facing technical presentations., • Apply agile software development practices to manage deliverables and sprint commitments., • Support software configuration management activities and maintain version-controlled code repositories. Required Qualifications: • Bachelor’s degree in Engineering (Aerospace, Electrical, Computer, Mechanical, or related discipline)., • 5 – 10 years of relevant software engineering experience in a technical/engineering environment., • Strong C programming skills with active, hands-on experience within the last 2 years., • Proficiency developing and debugging C applications in a Linux environment., • Strong Python development experience within the last 2 years., • Demonstrated ability to decompose system-level requirements into software requirements with traceability., • Experience writing software to integrate GFE with contractor-supplied modules., • Experience performing software interface analysis, integration testing, and verification., • Familiarity with IDE tools and web-based collaboration and configuration management platforms., • Strong written and verbal communication skills; comfortable presenting in customer-facing settings., • Ability to work both independently and in team environments using agile development practices., • Experience with system and software configuration management processes and tools. PREFERRED QUALIFICATIONS • Experience with unit testing and/or integration system software testing frameworks., • Background working with embedded processors and embedded software environments., • Experience with VxWorks Real-Time Operating System (RTOS)., • Familiarity with data-driven software architectures., • Experience with Core Flight System (cFS) or similar flight software frameworks., • Knowledge of NASA NPR 7150.2, DO-178C, and NASA-STD-8739.8 software safety standards., • Experience developing and testing safety-critical software within an Integrated Product Team., • Full life-cycle software development experience in a spaceflight or aerospace context., • Experience with collaboration tools: GitLab, JIRA, and/or Confluence., • Prior experience supporting NASA JSC programs, processes, and organizations., • Flight Demo or human-rated system experience a significant plus.

Job Description Overview Materials & Processes Engineer LOCATION: NASA Johnson Space Center JOB STATUS: Full Time CLEARANCE: Background check & U.S. Citizenship required Are you inspired by human space exploration and passionate about pushing the boundaries of technology to benefit both space missions and life on Earth? Join our diverse and highly collaborative team as we tackle NASA’s deep space exploration challenges. As NASA’s largest engineering solutions provider, we partner with NASA centers across the United States to deliver cutting-edge engineering support for mission-critical programs. We have an exciting opportunity for an Materials & Processes Engineer! RESPONSIBILITES The Materials & Processes Engineer will: • Advise, guide, and provide consultation on requirements for Materials & Processes (M&P) for intravehicular (IVA) and, • extravehicular (EVA) environments, including materials selection, process control and qualification, design for corrosion, • prevention, electrical bonding, flammability, toxic off gassing, and processes specification., • Assist in review and development of hardware, analysis, operation, hazard reviews, anomaly resolution, requirements, • verification, re-flight assessments, and flight acceptance testing., • Formulate presentations and present to program boards as appropriate., • Implement M&P system requirements into hardware design and develop verification and validation plans and, • statements., • Provide input to program/project specifications and ensure appropriate materials requirements are incorporated into all, • program/project specifications at the right level., • Review project/program documentation, specifications, and engineering drawings to ensure M&P requirements are met, • for spaceflight hardware., • Assess whether standard vendor processes meet requirements, and if not, clearly define changes that need to be, • implemented., • Provide vendors with recommendations for qualification and acceptance testing that will properly satisfy verification of, • requirements., • Provide inspection and manufacturing process support for human space flight system., • Other duties as required. REQUIRED EXPERIENCE/SKILLS • Seven (7) or more years of related work experience in Materials and Processes., • Bachelor's degree or higher in Engineering (Metallurgy, Materials Science, Aerospace, Mechanical, Electrical, Chemical,, • Systems)., • Knowledge in materials and processes for space applications, including materials selection (metallic and nonmetallic), design for corrosion prevention and electrical bonding, failure analysis, heat treatment, adhesive bonding, contamination control, etc., • Familiar with metallic and nonmetallic materials specifications, properties, testing., • Knowledge in engineering drawing review for materials and processes., • Overall background on M&P working knowledge for different systems: propulsion, crew compartments, environmental life support systems, thermal, and electronic systems., • Effective written and verbal communication skills with the ability to critically assess manufacturing/material processes and designs., • Willingness to learn and coordinate across other disciplines is highly desired., • Ability to assess and prioritize tasks and identify potential technical risks., • Ability to work collaboratively and independently in a multidisciplinary field., • Strong analytical and problem-solving skills. *This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. PREFERRED EXPERIENCE/ SKILLS • M.S. or Ph.D. in Engineering., • Previous experience in material selection (metallic and nonmetallic) for electrical components, corrosion prevention, flammability prevention, oxygen compatibility, processes qualification, contamination control, development, test, and evaluation for NASA and/or aerospace projects., • Previous experience in directing, guiding, and coordinating a technical team is highly desirable., • Previous experience with human space flight system engineering and integration practices. #LI-AD1 #CJ

Job Description Vanderlande Logistics LLC is searching for a Supervisor for the Airport Logistics Operation to support our Airport Projects in Houston, Texas. You will perform on-site technical and operational support in the design, development, installation and maintenance of baggage handling systems of a complex nature. Responsibilities: Supervises mechanical and electrical subcontractors to ensure they adhere to the project schedule. Performs complex site surveys to develop base or installation design plans. Performs training customers to maintain and adjust complex equipment. Completes and submits reports covering all job activity. Performs in maintaining complex tools, test equipment, calibration items, etc. Performs the review of complex task plans, drawings, and installation schematics and provides continual guidance to subcontractors throughout task duration. Education: BS/BA in related discipline, or advanced degree, where required, or equivalent combination of education and experience. Certification may be required in some areas. Knowledge and Experience: Broad knowledge on installation of conveyor equipment for baggage handling systems. Demonstrates and applies a broad knowledge of field of specialization through successful completion of moderately complex assignments. Successfully applies complex knowledge of fundamental concepts, practices, and procedures of particular area of specialization. Demonstrates knowledge of organization's business practices and issues. Typically, 2-5 years of successful experience in site supervision and successful demonstration of Key Responsibilities and Knowledge as presented above. Advanced degree MAY be substituted for experience, where applicable. Direction of Others: Provide general guidance or train support and/or professional staff. Key Working Relationships: Primarily intra-organizational contacts and external contacts. Travel: 95% assigned to specific project and 5% to support other projects Qualified Applicants must be legally authorized for employment in the United States. Qualified Applicants will not require employer sponsored work authorization now or in the future for employment in the United States. Why Join Vanderlande? • Benefits start on day one., • The starting rate for this position is $33.00 The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications and premium geographic location. Professional development and tuition reimbursement, • $1,000 Sign Bonus, • Matching 401K, • Equal opportunity workplace that embraces and promotes ownership culture, empowerment, open communication, diversity, and collaboration., • 18 days of paid PTO Design your future with us! Apply today and join Team Vanderlande.

Job Description Procurement Coordinator Houston, Texas With 19 years of experience delivering complex electrical systems, Hays Electrical Services relies on strong procurement strategies to support large-scale commercial and mission critical construction projects. Position Summary The Procurement Coordinator is responsible for sourcing, purchasing, and coordinating materials and equipment required for electrical construction projects. This role works closely with project teams and vendors to ensure timely delivery, cost control, and quality compliance. Key Responsibilities * Source and procure electrical materials and equipment. * Solicit and evaluate vendor quotations. * Issue purchase orders and track deliveries. * Coordinate with project teams to align material needs with schedules. * Maintain accurate procurement records and documentation. * Monitor pricing trends and support cost control initiatives. * Build and maintain strong vendor relationships. Required Qualifications & Competencies * Experience in construction procurement or supply chain operations preferred. * Strong negotiation and organizational skills. * Understanding of electrical materials and construction processes. * Ability to manage multiple priorities and deadlines. * Strong communication and documentation skills. With 19 years of industry leadership, Hays Electrical Services continues to provide reliable, high-quality electrical construction solutions across commercial and mission critical markets. Our success is built on strong teams, disciplined processes, and a commitment to excellence at every stage of project delivery. Powered by JazzHR 7P9yIMqhR8

Job DescriptionAnalyzer Technician$23-$26/hr 1st shift : 6am - 3:30pm Temp to Hire Is responsible for performing basic application engineering support functions to test and evaluate analyzers to ensure that customers specifications are met and that systems function properly and have long-term reliability. Specific Accountabilities: • Manufacturing testing of Process and Natural Gas. Ability to troubleshoot system issues of both an electrical and analytical nature. Responsible for testing hardware, understanding GC applications and the use of chromatography software., • Tests and evaluates analyzer applications by reviewing specifications for applications for accuracy, blending gases, repairing electronic and mechanical problems, programming and testing the controller attached to the system, and checking for valve problems., • Tests analyzers in the environmental chamber, modifies test fixtures to interface with the chamber, installs analyzers in the chamber, runs computer programs to test the analyzers, and furnishes data to Quality., • Ensures all documentation is assembled for the customers print package and is accurate, notifies of changes to specifications, provides input to shipping schedules, and logs problems and failures and reports to Quality., • High School graduate or equivalent required (GED), • Process GC manufacturing test experience preferred. Strong analytical, electronics, and mechanical background. Background in chemistry in reference to analytical applications., • Technical degree preferred and/or strong experience in testing and understanding Process Gas GC applications., • Must have strong interpersonal and communication skills., • Exposed to fumes, gases, and chemicals.

Job Description Buyer II | Power Temp Systems | Houston, TX Power Temp Systems is seeking an experienced and driven Buyer II to support and strengthen our purchasing operations in Houston. This role is ideal for someone who understands the pace and demands of a manufacturing or industrial environment and takes pride in building strong vendor partnerships, optimizing costs, and keeping operations running efficiently. As part of a growing family of companies, Power Temp Systems delivers reliable power and electrical solutions across the Gulf Coast. Our team is built on accountability, collaboration, and a commitment to doing things the right way. About the Role The Buyer II plays a critical role in ensuring materials, equipment, and supplies are sourced efficiently and delivered on time. This position goes beyond day-to-day purchasing and focuses on vendor performance, cost optimization, and supporting cross-functional teams across operations. You will work closely with Manufacturing, Engineering, Quality, and Finance to support production needs while maintaining inventory accuracy and minimizing delays. Key Responsibilities • Issue and manage purchase orders in alignment with company procedures, • Track and monitor orders to ensure on-time delivery, • Negotiate pricing, lead times, and terms with vendors, • Source materials competitively by obtaining multiple quotes when needed, • Maintain optimal inventory levels and anticipate supply needs, • Build and manage strong supplier relationships, • Ensure compliance with purchasing policies and regulatory guidelines, • Partner with Inside Sales and Shipping & Receiving for accurate order fulfillment, • Maintain purchasing records and documentation, • Support continuous improvement and operational efficiency initiativesWhat We're Looking For, • Bachelor's degree preferred (Supply Chain, Business, Engineering, or related), • Equivalent experience considered (6+ years in procurement or buying), • Experience in a manufacturing, industrial, or supply chain environment, • Strong negotiation and vendor management skills, • Experience with ERP/MRP systems and Microsoft Office (especially Excel), • Solid understanding of inventory control, pricing, and supply management, • Ability to manage multiple priorities in a fast-paced environment, • Strong analytical, problem-solving, and organizational skills, • Excellent communication skills across internal teams and external vendors, • Experience with continuous improvement (Lean, Six Sigma) is a plusCompensation & Schedule, • Salary: $70,000 – $85,000, • Schedule: Monday through Friday, standard business hours with occasional overtime as needed, • Minimal travel requiredWhy Join Power Temp Systems?, • Growing, stable organization with long-term career opportunities, • High-impact role with visibility across multiple departments, • Collaborative, team-oriented environment, • Opportunity to influence purchasing strategy and vendor performance

Job Description Supreme Integrated Technology is looking for candidates who want to take the next step in their career to join our 100% employee-owned company. SIT’s engineering expertise transforms ideas into success for hydraulic and electrically powered moveable structures. SIT specializes in custom systems and projects, making every project unique and offering the opportunity to solve challenging problems for customers. Our projects are typically for marine, oil & gas, defense, civil (movable bridges) and industrial power unit applications. We pride ourselves on a culture of teamwork—because we are a smaller company, you can be involved in every aspect of a project and make an impact from start to finish. We are seeking a highly experienced Director of Engineering to be a leader in SIT’s multidisciplinary engineering organization and drive technical excellence across hydraulic, electric, and electrohydraulic system solutions. This role is responsible for engineering strategy, technical execution, talent development, and cross-functional collaboration to ensure projects are delivered safely, on time, on budget, and to the highest quality standards. The Director of Engineering will work closely with integrated systems, engineering operations, sales, project management, and key customers to translate complex requirements into engineered-to-order solutions that support SIT’s long-term growth strategy. Key Responsibilities: • Engineering Leadership & Strategy: participate in SIT’s engineering leadership team to define and execute SIT’s engineering strategy aligned with business objectives, market opportunities, and emerging technologies in electrification, automation, and fluid power systems., • Technical Oversight: Provide senior-level technical guidance and design review for complex hydraulic, electric and structural projects, ensuring compliance with customer requirements, codes, standards, and best practices., • Team Development: Build technical depth, promote knowledge sharing, and support succession planning., • Project Execution & Accountability: Partner with project management and operations to ensure engineering deliverables support efficient fabrication, testing, installation, and commissioning., • Cross-Functional Collaboration: Work closely with sales, system integration and engineering operation teams during pursuit and proposal phases to support solution development, technical risk assessment, and cost accuracy., • Defense Compliance & Security Standards: Provide engineering leadership for defense-related programs by ensuring projects comply with CMMC 2.0 cybersecurity requirements and applicable MIL-SPEC standards. Partner with internal stakeholders, customers, and suppliers to uphold security, documentation, and technical compliance across the full project lifecycle., • Process Improvement & Standards: Establish and maintain engineering processes, design standards, documentation practices, and continuous improvement initiatives to enhance quality, consistency, and scalability., • Customer & Stakeholder Engagement: Serve as a technical interface with key customers, OEMs, classification societies, and regulatory bodies for high-visibility or technically complex programs., • Technology & Innovation: Stay current on industry trends in electrification, controls, energy storage, and fluid power to guide technology adoption and future system architectures., • Safety & Quality Leadership: Promote a culture of safety, quality, and accountability within the engineering team and across the project lifecycle. Education: • BSEE, BSME, BAET (ABET accredited university), or equivalent technical degree with relevant experience., • Advanced technical training or certifications related to hydraulics and/or fluid power are a plus., • MBA is a plus but not required. Experience: • 10+ years of progressive engineering experience in hydraulic or electrohydraulic system design and integration., • 5+ years in an engineering leadership or management role., • Experience delivering engineered-to-order systems in marine, oil & gas, defense, civil infrastructure, or heavy industrial environments., • Strong understanding of system-level engineering, design reviews, and lifecycle execution., • Experience in negotiating, reviewing, and developing contract technical specifications. Desired Experience, Knowledge & Skills: • Deep knowledge of electric power systems, controls, PLC programming, and/or fluid power systems., • Ability to read, interpret, and approve electrical, hydraulic, and control schematics., • Proven ability to lead teams in a fast-paced, project-driven environment with shifting priorities., • Strong communication skills—both written and verbal—with the ability to engage technical and non-technical stakeholders., • Results-oriented, hands-on leadership style with strong organizational and decision-making skills., • High level of accountability, professionalism, and customer focus. We offer a competitive salary and benefits package, including medical, dental, vision, life and disability insurance, and 401(k) plans with company match. A unique benefit SIT offers as part of Employee Owned Holdings, Inc. is an employee stock ownership plan. What is an ESOP? ESOP is a special retirement program that allows employees to own stock in the company. When you join EOHI, you automatically begin investing in your future (without having to purchase shares). We are a high-growth company committed to training our employee-owners to develop their skills and advance in their careers. • Studies also show that retirement account balances for ESOP companies are 2.5 times higher., • ESOP companies grow 2.5 times faster than those companies without employee ownership., • Research shows employee-owned companies are superior in performance, employee benefits, and employee morale because everyone is working towards a common goal.