Offres forklift à San Diego, California - Page 2Create job alerts

As a Forklift Supervisor, you will be responsible for operating forklifts and supporting warehouse tasks, including: operate forklifts and other warehouse equipment safely.

Job Description Job Summary As a Class A CDL Driver, Crane Certified with National Trench Safety, you will be required to deliver and pick up trench-related shoring to and from customer job sites safely, timely, and efficiently. This position will require a truck-mounted crane. This position will adhere to all safety policies and procedures directed by DOT, FMCSR, and National Trench Safety. This position is a safety sensitive role that requires compliance with the company's drug and alcohol policy and adherence to all safety regulations and procedures. Key Responsibilities • Operate company vehicles in a safe, efficient, and professional manner., • Comply with all DOT regulations as related to the safe operation of your vehicle, including:, • Vehicle inspections at the beginning and end of each shift. Reporting any identified vehicle issues., • Keep accurate electronic driver HOS logs., • Maintain current driver and crane credentials as required., • Comply with pre-employment, routine, random drug and alcohol testing requests., • Secure load strictly complying with DOT and company policies., • Report all accidents involving the driver or equipment to the branch management, • Deliver and pick-up shoring and plates to and from job sites multiple loads per day., • Occasionally load and unload your truck and trailer on the customer’s job site., • Occasionally assemble and disassemble shoring on job sites, • Ensure all delivery documents are properly maintained and turned in as required., • Apply knowledge of driving skills in maneuvering at various speeds in difficult locations, heavy traffic, inclement weather, mountainous terrain or tight loading dock operational areas, • Maintain open communication with branch for delivery schedules and promptly report problems related to deliveries., • Adhere to all customers’ safety requirements while at customer job sites, • May assist with yard operations, clean and prepare areas sites to eliminate possible hazards, other responsibilities as assigned, • May provide training assistance to customers by answering general questions regarding the safe operations of shoring equipment, • Record and Report to the branch management, Inside Sales rep and customer of any damage to NTS rental equipment that is as identified by the driver during the pickup process, • Be available to customers’ needs, including occasional after-hours emergencies, as needed by the branch from time to time, • Ability to secure loads safely, • Excellent communication skills verbal and written to enhance relationships with customers., • A positive attitude and occasionally requires lifting up to 50 lbs., • A minimum of (2) two years of direct experience driving vehicles that require a Class A Commercial Driver’s License is preferred., • Current Class A Commercial Driver’s License issued from the State Department of Motor Vehicles, • Valid Medical Examiner’s Certificate in accordance with FMCSR 49 CFR 391.41-391.49, • Crane Certification from NCCCO - National Commission for the Certification of Crane Operators preferred, • Excellent medical, dental, and vision plans, • 401(k) retirement plan with company match and immediate vesting, • Team Ownership Program (TOP) grants an annual stock award to every active full-time employee. TOP is unique for a privately held company but is offered to show how much we value our employees!, • Flexible spending and health savings accounts, • Basic and Voluntary life and disability insurance, • Paid Time Off that is either awarded or begins to accrue on the first pay period, • 8 paid holidays, • Birthday and Work Anniversary holidays after one year of service, • Incentive bonus plans About our Team: At National Trench Safety (NTS), our team of employees is our most valuable asset and one of our customers’ greatest resources. NTS was built around a team of experienced industry professionals, and as NTS continues to grow we continue to attract talented individuals. The NTS team contains some of the industry’s most respected and recognized trench safety veterans. NTS is a customer service-focused organization, which can be reflected in the company’s culture and commitment to its customers. NTS is an equal opportunity employer M/F/D/V. Qualified candidates will receive consideration for employment regardless of race, color, religion, sex, nation origin, sexual orientation, gender identity, disability, or protected veteran status.

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview \n • Performs all tasks in a safe manner, wearing required PPE and following all safety regulations. \n, • Know and understand all Safety rules and guidelines to ensure work is performed safely.\n, • Review work orders with resource as they are received, ask for clarification and confer with the requestor for additional clarification when needed.\n, • Originate and process emergency work orders when necessary.\n, • Have a clear understanding of and strictly comply with LO/TO policy.\n, • Use computer managed system to find needed parts for repairs.\n, • Maintain written documentation of work performed.\n, • Complete PMs as required both safely and procedurally. \n, • Troubleshoot an inoperable machine or piece of equipment made in house. Work may involve installing, servicing, replacing, and/or repairing any machine or equipment plant-wide, with or without schematics. Exact skills will be based on competencies known and properly trained in. Specifics of this could be:\n, • Calibrate different instrument types.\n, • Operate basic and advanced shop tools as required to maintain or repair equipment.\n, • General cleaning to maintain clean work areas.\n, • Shift to shift communication and with members of the maintenance or operational team.\n, • Ability to work a set schedule.\n, • Willingness and ability to train on new technology.\n, • Trained of cranes, rigging and hoists.\n, • Reads drawings, prints & sketches.\n, • Strong analytical and problem solving skills.\n, • Ability to prioritize and effectively utilize available resources.\n, • Train others as needed\n, • Works overtime as needed\n, • Other duties as assigned\n, • Forklift Experience.\n, • Hazardous Waste Management.\n, • Ability to drive company Vehicles.\n\n Job Requirements \n • Area may or may not be air conditioned or heated and may be humid and hot or cold depending on seasonal conditions.\n, • Exposure to hot and/or abrasive surfaces.\n, • Required to be in tight spaces and heights on occasion.\n, • Possible exposure to noise levels over 90 decibels for 12 hours at certain locations. Participation in hearing conservation program required\n, • Moving machinery or moving objects on production floor.\n, • Floor surfaces are slippery at times.\n, • Exposure to chemicals which may cause eye or skin irritation and/or burns, and irritation to respiratory system.\n, • Exposure to static electricity on occasion.\n, • Exposure to and use of sharp implements at times.\n, • Exposure to outside elements on occasion.\n\n What your background should look like Typically requires a minimum of 6 years of related work experience. Requires completion of high school. Vocational training or an AA degree is preferred. High School Diploma or GED Journeyman's License Preferred CPR/FA/BBP Certification 5+ years of manufacturing experience in a maintenance role Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). COMPENSATION • Competitive base salary commensurate with experience: $63,300 - $95,000 (subject to change dependent on physical location), • Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity., • Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities.

Job DescriptionDo You Want to Improve the Future of Healthcare? • Want to enable the world's top scientist to deliver impactful healthcare solutions faster?, • Do you believe that the best team wins?, • Do you thrive on providing innovative solutions to unique challenges? Onsite Role Position Summary: The Automation Technician will assemble automation work cells and work on customer engineering projects. This position will assist in shipping and receiving components for projects and the automation engineers with the operational testing of instrumentation on the projects. Responsibilities: • Assemble automation workcells and custom engineering projects., • Configure electrical, pneumatic, and communications on automation workcells and custom engineering projects based on design schematics., • Label and organize all workcell wiring., • Unpack, arrange, level, and secure automation workcell tables., • Mount instrumentation and shelves to workcells., • Assist Shipping/Receiving to keep components organized and the shop clean., • Assist engineering team with operational testing on instrumentation., • High School Diploma., • Relevant trade-skill school degree desirable., • At least 1-2 years of experience with hand-tools (drills, saws, wrenches, etc), including cutting, drilling, and tapping aluminum or similar., • Experience working with extruded aluminum profile (such as 80/20) is preferred., • Excellent attention to detail and drive for quality., • Ability to read Engineering drawings., • Able to use electric and pneumatic tools., • Basic computer skills are required, including Microsoft Word and Excel., • Ability to operate a forklift is desired, Total Compensation target is $24.00 - $27.00 an hour; actual pay will vary based on experience. Benefits include 401K with company match, Flexible Vacation Policy, Health Benefits, Investment in Professional and Personal Development, and much more. Biosero provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws. In addition, Biosero complies with applicable state and local laws governing nondiscrimination in employment in every location in which it has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Biosero is committed to diversity and inclusion. We seek individuals from all backgrounds and appreciate and celebrate the diversity of our growing team. Powered by JazzHR ddwzwRd0sf

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a Warehouse Driver to join our Rexel USA team in San Diego, CA! Warehouse Driver I, II, or Senior level: Employee’s level and pay will be dependent on their level of experience, knowledge, and capabilities. Summary: The Warehouse Driver is responsible for delivering products to/from customers, company branch/warehouse locations, and company suppliers in a delivery van or box truck (No CDL required). Responsible for ensuring that deliveries are prepared to meet customer requirements in the most efficient manner and materials are correct and free of damage. What You'll Do: • Inspect company vehicle for visual and operating defects; responsible for completing a daily inspection report, • Keep company vehicle clean, serviced, and maintained; alert supervisor of repair and/or service needed, • Must follow Department of Transportation (DOT), local and state driving laws and regulations, • Load or unload vehicle and ensure all material for each order is correct (quantity and type of material) and that material is free of damage before departure, • May assist in preparing orders for delivery, • Ensure all appropriate documentation is thoroughly completed at the time of delivery, including delivery receipt is signed by the customer, packing list and branch/warehouse manifest, • Pick up material returns from customers; responsible for inspecting the condition of the material and verifies quantities and catalog numbers, • Pick up material from company suppliers, • Senior Truck Driver will participate in the training of entry level Truck Drivers; and provides mentorship and coaching, • May be required to support other Warehouse duties such as preparing and filling orders and/or receiving, stocking, staging, and shipping material, • Perform other duties as assigned Job Duties Disclaimer: The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all responsibilities, duties, knowledge, skills, and abilities needed to perform the job. Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time. The ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrate commitment to effective customer service delivery, integrity, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Rexel USA. Qualifications • In lieu of experience, must attend company driver training, • Must have a valid driver’s license, • Must be at least 21 years of age, • Must pass a pre-employment and annual review of the Motor Vehicle Record, • Must obtain verification of non-expired medical certificate as required by law within 60 days of hire, • Must not have had a suspended driver's license for a traffic accident/violation within the past 3 years, • Must not have any at fault accidents in the past 3 years, • Ability to handle loads with a combine weight not to exceed 26,000 GVW, • Ability to handle basic issues and problems, • Strong knowledge of safety regulations and be familiar with traffic and driver laws, • Willingness to adhere to assigned routes, schedules, safety procedures, and transportation laws, • Excellent organizational and time management skills; ability to meet deadlines, • Excellent customer service skills, • Good attention to detail, • Ability to meet deadlines, • Ability to work overtime as needed Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Constantly – at least 51%, • Walk: Must be able to move about inside/outside office or work location - Occasionally – up to 20%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Talk, hear, taste, smell: Must be able to use senses to effectively communicate with co-workers and clients and detect hazardous conditions - Constantly – at least 51% Weight and Force Demands: • Up to 10 pounds - Constantly – at least 51%, • Up to 25 pounds - Constantly – at least 51%, • Up to 50 pounds - Frequently – 21% to 50% Working Environment: • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - Occasionally – up to 20%, • Handles or works with potentially dangerous equipment - Frequently – 21% to 50%, • Travels to offsite locations - Constantly – at least 51% Disclaimer: “Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.” For the state of California only, the pay is $20.00 to $24.00 depending upon qualifications, experience, and other considerations permitted by law. Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job DescriptionJoin a Team that Powers Aerospace Senior Aerospace Ketema, part of Senior plc’s global network of 26 businesses in 12 countries, delivers high-technology components to aerospace, defense, land vehicle, and power & energy markets through our Aerospace and Flexonics divisions. Our culture is built on Safety, Integrity, Customer Focus, Respect & Trust, Accountability, and Excellence. We thrive on teamwork, innovation, and results. We’re hiring a full-time, temporary Facilities Power Systems Electrician for our El Cajon, CA operation. Role Snapshot • Maintain, repair, install, and remove company electrical equipment and plant systems., • Conduct needs analyses and develop purchasing specifications for new electrical components., • Perform periodic maintenance on lighting, motors, and heating equipment systems., • Repair, install, replace, and test electrical circuits, equipment, and appliances with appropriate tools and test instruments., • Use ammeter, ohmmeter, voltmeter, testing lamp, and growler to isolate faults in wiring, switches, motors, and other equipment., • Install and maintain motors, welding equipment, lighting fixtures, generators, circuit breakers, and transformers., • Mount motors, transformers, and lighting fixtures and complete circuits per diagram specifications., • Monitor installed equipment for hazards, needed adjustments, or replacement., • Inspect and test electrical lighting, signal, communication, and power circuits., • Ensure all work complies with safety procedures and local building/safety codes.How We Work Together, • Dependable attendance and punctuality; overtime when necessary., • Follow supervisory direction and standard work rules and procedures., • Work safely and in alignment with corporate policies, goals, and objectives., • Collaborate effectively, accept feedback, set goals, and show initiative and commitment.Qualifications, • High School Diploma or GED., • Electrical Certification., • 2 years of electrical experience.Preferred Skills, • Forklift Certification., • Proficiency with diagnostic equipment. Equal Opportunity Employer: minority/female/disability/veteran Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents, U.S. refugees, asylees or temporary residents under amnesty provisions [as defined in 8 USC 1324b(a)(3)] and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for trade compliance control purposes. Additionally, potential employee’s names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive technical data.

Job DescriptionJoin the VetPowered Team: Seeking Skilled CNC Machinery Repair Field Service Technicians! Are you a fully-trained CNC Machinery Repair Technician with a passion for precision and problem-solving? VetPowered, a leader in advanced manufacturing solutions, wants you on our team! 🔧 What You'll Do: • Perform preventative maintenance on cutting-edge CNC machines., • Respond to service calls with expertise and urgency., • Fully-trained CNC Machinery Repair Technicians., • Certification is a plus but not required—we value experience and skill!, • Competitive pay and benefits., • Opportunities for professional growth and training. About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States is a rapidly growing San Diego based corporation specializing in manufacturing, welding, fabrication, machinery repair and customized training under private and US Government contracts. VetPowered employs a highly trained workforce that uses the latest in cutting edge CNC equipment. VetPowered is dedicated to bringing advanced manufacturing back to America. Key Job Functions: At VetPowered, the CNC Machinery Repair Technician you will play a crucial role in ensuring the optimal operation and maintenance of CNC machines. Your responsibilities will include troubleshooting, repair, and preventive maintenance to guarantee the efficiency and accuracy of CNC machining processes. This position requires a strong technical background, problem-solving skills, and the ability to work independently and collaboratively with manufacturing teams and outside organizations. Here is a detailed breakdown of your responsibilities: Essential Duties and Responsibilities: Machine Installation and Setup: • Install and set up CNC machines according to manufacturer specifications., • Conduct thorough testing and calibration to ensure accuracy and functionality.Routine Maintenance:, • Perform regular preventive maintenance on CNC machines to prevent breakdowns and optimize performance., • Diagnose and troubleshoot mechanical, electrical, and hydraulic issues with CNC machines., • Execute timely and effective repairs to minimize downtime and maintain production schedules., • Conduct inspections and tests to ensure CNC machines meet quality standards and produce accurate components., • Maintain accurate records of machine maintenance, repairs, and service history., • Document any modifications made to machine configurations or settings., • Provide training to machine operators on proper CNC machine operation and basic maintenance tasks., • Adhere to and enforce safety protocols and guidelines during all service and maintenance activities., • Collaborate with manufacturing engineers, production managers, and other stakeholders to optimize CNC machining processes., • Maintain a neat, clean, and professional appearance and uniform at all times., • Create extremely positive customer interactions by generating quotes, performing work, judiciously purchasing material, and satisfying our customers., • Be extremely punctual and always arrive at the worksite or customer location early., • Provide extremely high levels of Customer Support by always providing exceptionally professional, courteous, and cheerful service., • Technicians are responsible for being efficient on a contract, as well as reporting back to the scheduling team that they are under-scheduled to the 90% (or 7 hours) of billable time., • Assist with day-to-day operations around the shop and in the field to include but not limited to Machinery Repair & Maintenance, Machinery Cleaning, Diagnosing, Disassembly and Re-Assembly of Machinery, Equipment, Vehicles, and Tools., • Perform Facility Maintenance as required/directed., • Deliver and pickup parts, materials, supplies, water, etc. as required and/or directed., • Be familiar with the proper and safe use of basic hand and power tools., • Safely lift up to 50lbs with both hands and without the use of a forklift., • Other duties as may be assigned., • High school diploma or equivalent; additional technical certifications or education a plus., • 5+ years of industry experience working for a large OEM, or a third party service company such as DMG, Nakamura, Methods, Fanuc, DM Solutions, Ellison, Citizen, Makino, Star, Takisawa, Matsuura, Hardinge, Usach, Kellenberger, etc, • Proven experience as a CNC Machining Service Technician or in a similar role., • Strong knowledge of CNC machine operations, programming, and troubleshooting., • Proficiency in the use and employment of advanced machine tool calibration systems such as Renishaw QC-20 Ballbar and XL-80 Laser Interferometer., • Proficiency in reading and interpreting blueprints and technical drawings., • Familiarity with various CNC control systems and software., • Attention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small., • All In-Brings their whole self to work and giving it their all no matter how difficult the job or situation., • Accountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses., • Adaptable- Easily adjusts to changing circumstances. Pay: This pay does not include any opportunity for incentive compensation and is only reflective of the base pay for this position. The range of pay for this California-based position is $31.25-$40.87 hourly. The actual compensation offer will carefully consider a wide range of factors including your skills, qualifications, experience, and location. If your experience looks a little different from what we’ve listed and you think can bring value to VetPowered we would love to learn more about you and encourage you to apply. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas. Employee may have additional environmental hazards such as: chemical, electrical, flammable, or mechanical in nature. E-Verify Compliance Statement: VetPowered, LLC participates in the E-Verify program. We ensure employment eligibility of all employees by using the E-Verify electronic verification system. Policy for Discrimination, Harassment and Retaliation Prevention: VetPowered, LLC is committed to providing a professional work environment free from discrimination and harassment, including discrimination and harassment based on a protected characteristic, and an environment free from retaliation for participating in any protected activity covered by this policy. VetPowered, LLC employees are expected to assume responsibility for maintaining a work environment that is free from discrimination, harassment, and retaliation. Employees are encouraged to promptly report conduct that they believe violates this policy so that we have an opportunity to address and resolve any concerns. Managers and supervisors are required to promptly report conduct that they believe violates this policy. We are committed to responding to alleged violations of this policy in a timely and fair manner and to taking appropriate action aimed at ending the prohibited conduct. EEO Statement: VetPowered, LLC is committed to providing equal employment opportunities to all employees, applicants, unpaid interns, and volunteers without regard to actual or perceived: race (including hair texture or protected hairstyles, e.g. braids, locks, and twists), color, religion, religious creed (including religious dress and grooming practices), national origin (including language use restrictions), ancestry, citizenship, disability (mental and physical) including HIV and AIDS, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, family and medical leave status, domestic violence victim status, political affiliation, and any other status protected by federal, state, or local law. All openings are subject to change without notice, due to the volume of applications / resumes received, we are unable to respond to status inquiries. Please be assured that your information is being properly handled and forwarded to the appropriate hiring staff. If your skills and qualifications meet the needs of the job, you will be contacted. Powered by JazzHR BkCfxwUx77

Now hiring an experienced Costco Forklift Operator to perform responsibilities as a Forklift Operator.

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview \n • Performs all tasks in a safe manner, wearing required PPE and following all safety regulations. \n, • Know and understand all Safety rules and guidelines to ensure work is performed safely.\n, • Review work orders with resource as they are received, ask for clarification and confer with the requestor for additional clarification when needed.\n, • Originate and process emergency work orders when necessary.\n, • Have a clear understanding of and strictly comply with LO/TO policy.\n, • Use computer managed system to find needed parts for repairs.\n, • Maintain written documentation of work performed.\n, • Complete PMs as required both safely and procedurally. \n, • Troubleshoot an inoperable machine or piece of equipment made in house. Work may involve installing, servicing, replacing, and/or repairing any machine or equipment plant-wide, with or without schematics. Exact skills will be based on competencies known and properly trained in. Specifics of this could be:\n, • Calibrate different instrument types.\n, • Operate basic and advanced shop tools as required to maintain or repair equipment.\n, • General cleaning to maintain clean work areas.\n, • Shift to shift communication and with members of the maintenance or operational team.\n, • Ability to work a set schedule.\n, • Willingness and ability to train on new technology.\n, • Trained of cranes, rigging and hoists.\n, • Reads drawings, prints & sketches.\n, • Strong analytical and problem solving skills.\n, • Ability to prioritize and effectively utilize available resources.\n, • Train others as needed\n, • Works overtime as needed\n, • Other duties as assigned\n, • Forklift Experience.\n, • Hazardous Waste Management.\n, • Ability to drive company Vehicles.\n\n Job Requirements \n • Area may or may not be air conditioned or heated and may be humid and hot or cold depending on seasonal conditions.\n, • Exposure to hot and/or abrasive surfaces.\n, • Required to be in tight spaces and heights on occasion.\n, • Possible exposure to noise levels over 90 decibels for 12 hours at certain locations. Participation in hearing conservation program required\n, • Moving machinery or moving objects on production floor.\n, • Floor surfaces are slippery at times.\n, • Exposure to chemicals which may cause eye or skin irritation and/or burns, and irritation to respiratory system.\n, • Exposure to static electricity on occasion.\n, • Exposure to and use of sharp implements at times.\n, • Exposure to outside elements on occasion.\n\n What your background should look like Typically requires a minimum of 6 years of related work experience. Requires completion of high school. Vocational training or an AA degree is preferred. High School Diploma or GED Journeyman's License Preferred CPR/FA/BBP Certification 5+ years of manufacturing experience in a maintenance role Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). COMPENSATION • Competitive base salary commensurate with experience: $63,300 - $95,000 (subject to change dependent on physical location), • Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity., • Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities.

Job Description Bilingual Warehouse Supervisor Summary: The Warehouse Supervisor is responsible for overseeing all aspects of warehouse operations, including receiving, storing, staging, and raw materials. They are also oversight to all outbound shipping of finished goods to customers or to cold storage. The Warehouse Supervisor must work in a fast-paced food manufacturing environment. This role provides leadership to warehouse personnel, ensures accurate inventory and documentation, enforces compliance with food safety and safety standards, ensures timely loading and correct loading of finished goods and supports cross-functional collaboration with Production, Quality, and Logistics teams. The ideal candidate is an experienced warehouse leader, proficient in forklift operation, inventory management, and bilingual in English and Spanish. This position reports directly to the Operations Manager. Essential Functions: Team Leadership & Supervision: • Supervise, coach, and schedule warehouse staff, including shipping/receiving and material handling teams., • Monitor performance and ensure tasks are completed accurately and efficiently., • Train team members in SOPs, safety protocols, equipment usage, and company policies., • Maintain accurate inventory levels through routine cycle counts, audits, and real-time updates., • Enforce FIFO practices and ensure all raw materials and packaging are rotated and stored properly. Ensure all outbound finished goods are also FIFO., • Oversee and coordinate all inbound and outbound shipments and deliveries., • Verify and inspect deliveries for accuracy, quality, labeling, and documentation., • Ensure timely and accurate preparation of Outbound documentation, Bills of Lading (BOLs), and shipping documents., • Ensure outbound trucks are refrigerated, clean and follow all QA protocols. Forklift & Equipment Oversight: • Safely operate forklifts and other warehouse equipment., • Ensure all warehouse personnel are trained and certified for equipment use., • Enforce adherence to food safety, OSHA, and company safety standards., • Maintain clean, organized, and hazard-free warehouse and staging areas., • Communicate effectively with Quality Assurance, Production, Maintenance, and Logistics teams., • Support plant goals by aligning warehouse operations with production schedules and customer shipments. Skills and Experience: Required: • Forklift experience (certification preferred), • Minimum 3–5 years of warehouse experience, including at least 1–2 years in a supervisory role., • Strong understanding of inventory management, shipping/receiving, and warehouse operations, • Strong leadership, communication, and organizational skills., • Ability to work in a fast-paced environment, • Basic arithmetic skills., • Ability to work and relate with others., • Able to follow safety guidelines., • Well organized., • Proficient in Microsoft Office Suite, Excel, Word, Outlook, Teams and Microsoft 365., • Must be bilingual English and Spanish. Desired: • Experience in food manufacturing or a similar regulated industry., • Experience using Warehouse Management Systems (WMS) or Enterprise Resource Planning systems (a plus)., • Familiarity with GMPs, HACCP, and food safety compliance. Physical Demands: • Frequent bending, twisting and lifting., • Ability to lift unassisted 30 - 50 lbs at a time., • Working standing and/or sitting for long periods of time., • Working in a warm environment with flour dust., • Working in a loud production environment., • Occasionally working extended shifts. Standard: • Professional demeanor with a proactive, hands-on approach., • Strong attention to detail and commitment to safety and quality., • Team player who leads by example., • Strictly adheres to all company safety and hygiene standards., • Good personal hygiene and neat appearance.Company DescriptionContribute to the growth and success of the company. If you're ready to be part of an exciting and growing company, apply now!Contribute to the growth and success of the company. If you're ready to be part of an exciting and growing company, apply now!

Requisition Number: 25582 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $54,755.00 - $67,662.40 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary For over a century, HII has built and maintained the U.S. Navy's most powerful warships. Join us as we continue to maintain the Navy's readiness! We are seeking a Journeyman level Marine Welder to provide support at South West Regional Maintenance Center (SWRMC) Product Family located in San Diego, CA. This Journeyman Welder will be responsible for welding tasks, provide structural and non-structural welding services in-shop and aboard ships. This includes hot work operations, component repair, fabrication and metal forming, pipefitting, and ship-fitting. Welder will also perform accommodation ladder/ship's gangway disassembly, assessment, and component repair to support U.S. Navy operations in San Diego, CA. What You Will Do • Conduct in-shop and on-board welding, including structural and non-structural tasks, hot work, and fabrication., • Repair and maintain accommodation ladders and ship's gangways to support U.S. Navy operations., • Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others., • May provide direction and lead others and May manage one or more multiple jobs., • Completes comprehension of specialty trades functions and tools. Performs a variety of complicated and non-routine tasks., • Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedules, reports and briefs customers and senior management., • May perform quality inspections on finished product. Performs duties outside of specialty in order to complete installation or work assignment.\n What You Must Have • High School education, or Trade School or equivalent, and 6 years of related experience., • Must have at least 6 years of experience with pipe bender, universal iron worker, plate shear, portable plasma cutter, oxygen/acetylene torch, drill press, horizontal band saw, vertical band saw, pipe notcher, finger brake, disc/belt sander, operated various GTAW/SMAW/GMAW welding machines, slip roll forming/bending machine, and portable electrical, pneumatic, and hand tools., • Must provide own hand tools as designated per trades specialty., • Must be able to obtain and maintain CAC ID base access and DoD Secret Security Clearance., • Must be able to obtain and maintain welding qualifications per the following list within ninety (90) calendar days of starting:, • GMAW aluminum plate 5356 in the vertical/horizontal/overhead positions., • SMAW steel plate 11018 in the vertical/horizontal/overhead positions., • GTAW aluminum plate 5356 in the vertical/horizontal/overhead positions., • GTAW 2-1/2" steel pipe 70S2 and RN-82 in the 6G position., • SMAW steel plate 8N12 in the vertical/horizontal/overhead positions., • As required by assignment: Grade III and Grade V Brazing in the vertical/horizontal positions, to include face-feed and insert type fittings., • Must be able to complete training and ceritifications within ninety (90) calendar days of starting:, • OHSA 10hrs, • CPR, • Fall protection training, • Low speed vehicle training (operation of carts), • PQS 301 Craftman qualification, • May be required to obtain forklift license depending on shop need., • Must obtain and maintain Marine Chemist Certification., • Start date contingent upon approval of base access which is required for this position and continued employment. \n Preferred: Bonus Points For • A current, valid DoD confidential clearance or higher., • MIG, TIG, ARC Welder and Brazing certifications. \n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview \n • Performs all tasks in a safe manner, wearing required PPE and following all safety regulations. \n, • Know and understand all Safety rules and guidelines to ensure work is performed safely.\n, • Review work orders with resource as they are received, ask for clarification and confer with the requestor for additional clarification when needed.\n, • Originate and process emergency work orders when necessary.\n, • Have a clear understanding of and strictly comply with LO/TO policy.\n, • Use computer managed system to find needed parts for repairs.\n, • Maintain written documentation of work performed.\n, • Complete PMs as required both safely and procedurally. \n, • Troubleshoot an inoperable machine or piece of equipment made in house. Work may involve installing, servicing, replacing, and/or repairing any machine or equipment plant-wide, with or without schematics. Exact skills will be based on competencies known and properly trained in. Specifics of this could be:\n, • Calibrate different instrument types.\n, • Operate basic and advanced shop tools as required to maintain or repair equipment.\n, • General cleaning to maintain clean work areas.\n, • Shift to shift communication and with members of the maintenance or operational team.\n, • Ability to work a set schedule.\n, • Willingness and ability to train on new technology.\n, • Trained of cranes, rigging and hoists.\n, • Reads drawings, prints & sketches.\n, • Strong analytical and problem solving skills.\n, • Ability to prioritize and effectively utilize available resources.\n, • Train others as needed\n, • Works overtime as needed\n, • Other duties as assigned\n, • Forklift Experience.\n, • Hazardous Waste Management.\n, • Ability to drive company Vehicles.\n\n Job Requirements \n • Area may or may not be air conditioned or heated and may be humid and hot or cold depending on seasonal conditions.\n, • Exposure to hot and/or abrasive surfaces.\n, • Required to be in tight spaces and heights on occasion.\n, • Possible exposure to noise levels over 90 decibels for 12 hours at certain locations. Participation in hearing conservation program required\n, • Moving machinery or moving objects on production floor.\n, • Floor surfaces are slippery at times.\n, • Exposure to chemicals which may cause eye or skin irritation and/or burns, and irritation to respiratory system.\n, • Exposure to static electricity on occasion.\n, • Exposure to and use of sharp implements at times.\n, • Exposure to outside elements on occasion.\n\n What your background should look like Typically requires a minimum of 6 years of related work experience. Requires completion of high school. Vocational training or an AA degree is preferred. High School Diploma or GED Journeyman's License Preferred CPR/FA/BBP Certification 5+ years of manufacturing experience in a maintenance role Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). COMPENSATION • Competitive base salary commensurate with experience: $63,300 - $95,000 (subject to change dependent on physical location), • Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity., • Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities. Location:

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview \n • Performs all tasks in a safe manner, wearing required PPE and following all safety regulations. \n, • Know and understand all Safety rules and guidelines to ensure work is performed safely.\n, • Review work orders with resource as they are received, ask for clarification and confer with the requestor for additional clarification when needed.\n, • Originate and process emergency work orders when necessary.\n, • Have a clear understanding of and strictly comply with LO/TO policy.\n, • Use computer managed system to find needed parts for repairs.\n, • Maintain written documentation of work performed.\n, • Complete PMs as required both safely and procedurally. \n, • Troubleshoot an inoperable machine or piece of equipment made in house. Work may involve installing, servicing, replacing, and/or repairing any machine or equipment plant-wide, with or without schematics. Exact skills will be based on competencies known and properly trained in. Specifics of this could be:\n, • Calibrate different instrument types.\n, • Operate basic and advanced shop tools as required to maintain or repair equipment.\n, • General cleaning to maintain clean work areas.\n, • Shift to shift communication and with members of the maintenance or operational team.\n, • Ability to work a set schedule.\n, • Willingness and ability to train on new technology.\n, • Trained of cranes, rigging and hoists.\n, • Reads drawings, prints & sketches.\n, • Strong analytical and problem solving skills.\n, • Ability to prioritize and effectively utilize available resources.\n, • Train others as needed\n, • Works overtime as needed\n, • Other duties as assigned\n, • Forklift Experience.\n, • Hazardous Waste Management.\n, • Ability to drive company Vehicles.\n\n Job Requirements \n • Area may or may not be air conditioned or heated and may be humid and hot or cold depending on seasonal conditions.\n, • Exposure to hot and/or abrasive surfaces.\n, • Required to be in tight spaces and heights on occasion.\n, • Possible exposure to noise levels over 90 decibels for 12 hours at certain locations. Participation in hearing conservation program required\n, • Moving machinery or moving objects on production floor.\n, • Floor surfaces are slippery at times.\n, • Exposure to chemicals which may cause eye or skin irritation and/or burns, and irritation to respiratory system.\n, • Exposure to static electricity on occasion.\n, • Exposure to and use of sharp implements at times.\n, • Exposure to outside elements on occasion.\n\n What your background should look like Typically requires a minimum of 6 years of related work experience. Requires completion of high school. Vocational training or an AA degree is preferred. High School Diploma or GED Journeyman's License Preferred CPR/FA/BBP Certification 5+ years of manufacturing experience in a maintenance role Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). COMPENSATION • Competitive base salary commensurate with experience: $63,300 - $95,000 (subject to change dependent on physical location), • Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity., • Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities.

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview • Performs all tasks in a safe manner, wearing required PPE and following all safety regulations., • Know and understand all Safety rules and guidelines to ensure work is performed safely., • Review work orders with resource as they are received, ask for clarification and confer with the requestor for additional clarification when needed., • Originate and process emergency work orders when necessary., • Have a clear understanding of and strictly comply with LO/TO policy., • Use computer managed system to find needed parts for repairs., • Maintain written documentation of work performed., • Complete PMs as required both safely and procedurally., • Troubleshoot an inoperable machine or piece of equipment made in house. Work may involve installing, servicing, replacing, and/or repairing any machine or equipment plant-wide, with or without schematics. Exact skills will be based on competencies known and properly trained in. Specifics of this could be:, • Calibrate different instrument types., • Operate basic and advanced shop tools as required to maintain or repair equipment., • General cleaning to maintain clean work areas., • Shift to shift communication and with members of the maintenance or operational team., • Ability to work a set schedule., • Willingness and ability to train on new technology., • Trained of cranes, rigging and hoists., • Reads drawings, prints & sketches., • Strong analytical and problem solving skills., • Ability to prioritize and effectively utilize available resources., • Train others as needed, • Works overtime as needed, • Other duties as assigned, • Forklift Experience., • Hazardous Waste Management., • Ability to drive company Vehicles.\n Job Requirements • Area may or may not be air conditioned or heated and may be humid and hot or cold depending on seasonal conditions., • Exposure to hot and/or abrasive surfaces., • Required to be in tight spaces and heights on occasion., • Possible exposure to noise levels over 90 decibels for 12 hours at certain locations. Participation in hearing conservation program required, • Moving machinery or moving objects on production floor., • Floor surfaces are slippery at times., • Exposure to chemicals which may cause eye or skin irritation and/or burns, and irritation to respiratory system., • Exposure to static electricity on occasion., • Exposure to and use of sharp implements at times., • Exposure to outside elements on occasion.\n What your background should look like Typically requires a minimum of 6 years of related work experience. Requires completion of high school. Vocational training or an AA degree is preferred. High School Diploma or GED Journeyman's License Preferred CPR/FA/BBP Certification 5+ years of manufacturing experience in a maintenance role Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). COMPENSATION • Competitive base salary commensurate with experience: $63,300 - $95,000 (subject to change dependent on physical location), • Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity., • Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities. Location: EL CAJON, CA, US, 92020 City: EL CAJON State: CA Country/Region: US Travel: None Requisition ID: 141716 Alternative Locations: Function: Manufacturing Nearest Major Market: San Diego Job Segment: Maintenance Mechanic, Machinist, Electrical, Web Design, Equity, Manufacturing, Engineering, Creative, Finance

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview • Performs all tasks in a safe manner, wearing required PPE and following all safety regulations., • Know and understand all Safety rules and guidelines to ensure work is performed safely., • Review work orders with resource as they are received, ask for clarification and confer with the requestor for additional clarification when needed., • Originate and process emergency work orders when necessary., • Have a clear understanding of and strictly comply with LO/TO policy., • Use computer managed system to find needed parts for repairs., • Maintain written documentation of work performed., • Complete PMs as required both safely and procedurally., • Troubleshoot an inoperable machine or piece of equipment made in house. Work may involve installing, servicing, replacing, and/or repairing any machine or equipment plant-wide, with or without schematics. Exact skills will be based on competencies known and properly trained in. Specifics of this could be:, • Calibrate different instrument types., • Operate basic and advanced shop tools as required to maintain or repair equipment., • General cleaning to maintain clean work areas., • Shift to shift communication and with members of the maintenance or operational team., • Ability to work a set schedule., • Willingness and ability to train on new technology., • Trained of cranes, rigging and hoists., • Reads drawings, prints & sketches., • Strong analytical and problem solving skills., • Ability to prioritize and effectively utilize available resources., • Train others as needed, • Works overtime as needed, • Other duties as assigned, • Forklift Experience., • Hazardous Waste Management., • Ability to drive company Vehicles.\n Job Requirements • Area may or may not be air conditioned or heated and may be humid and hot or cold depending on seasonal conditions., • Exposure to hot and/or abrasive surfaces., • Required to be in tight spaces and heights on occasion., • Possible exposure to noise levels over 90 decibels for 12 hours at certain locations. Participation in hearing conservation program required, • Moving machinery or moving objects on production floor., • Floor surfaces are slippery at times., • Exposure to chemicals which may cause eye or skin irritation and/or burns, and irritation to respiratory system., • Exposure to static electricity on occasion., • Exposure to and use of sharp implements at times., • Exposure to outside elements on occasion.\n What your background should look like Typically requires a minimum of 6 years of related work experience. Requires completion of high school. Vocational training or an AA degree is preferred. High School Diploma or GED Journeyman's License Preferred CPR/FA/BBP Certification 5+ years of manufacturing experience in a maintenance role Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). COMPENSATION • Competitive base salary commensurate with experience: $63,300 - $95,000 (subject to change dependent on physical location), • Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity., • Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities. Location: EL CAJON, CA, US, 92020 City: EL CAJON State: CA Country/Region: US Travel: None Requisition ID: 141716 Alternative Locations: Function: Manufacturing Nearest Major Market: San Diego Job Segment: Maintenance Mechanic, Machinist, Electrical, Equity, Web Design, Manufacturing, Creative, Finance, Engineering

Epsilon Systems Solutions, Inc. is seeking a full time Graving Dock Shipwright in San Diego, CA. \n Summary: The position, requiring minimal supervision will provide skilled Shipwright support for Graving Dock operations. This role demands expertise in preparing drydocks, assisting with safe docking and undocking procedures, as well as operating and maintaining graving dock machinery and systems. The ideal candidate will have a solid background in ship drydocking operations along with strong mechanical and technical skills. \n \n Duties and Responsibilities: \n\n • Participate in reviews of docking plans and vessel schematics as related to keel blocks and bilge blocks.\n, • Utilize standard mechanic’s tools, ship fitting equipment and tools, wood shaping equipment and tools, portable machine tools, fixtures, and various gauges in the maintenance and repair of SWRMC dry docks.\n, • Support the building, pre-docking arrangement/alignment, disassembly and removal of docking blocks as required for all docking operations within SWRMC dry docks.\n, • Operate, maintain, repair, remove, and install a variety of graving dock mechanical, electrical, and pneumatic equipment and system components, including but not limited to valves, piping, marine centrifugal pumps (both horizontal and vertical types), piston pumps, and associated capstans, winches, windlasses, and trolleys.\n, • Monitor mechanical systems on a routine basis for problems or abnormalities, when identified notify supervision, analyze causes, suggest possible solutions, performing corrective action as authorized.\n, • Perform machinery operational checks prior, and subsequent to dock operations as required.\n, • Perform machinery operational checks subsequent to equipment repairs, changeouts or extended downtime.\n, • Perform preventive maintenance equipment checks as required, reporting deficiencies to supervision.\n, • Provide thorough maintenance and repair reporting, documentation, and parts inventory.\n, • High school diploma or equivalent\n, • Hold current, or be eligible to obtain and maintain a DOD Security Clearance\n, • Minimum of 5 years drydock shipwright experience.\n, • Knowledge of Lockout Tag-out procedures.\n, • Proficient in researching, reading, and following technical manuals, blueprints, drawings, parts manuals, schematics, assembly instructions, and troubleshooting guides. Contact equipment manufacturers to obtain additional information regarding equipment operation, troubleshooting, and repair, when required.\n, • Ability to make recommendations using sound judgment while complying with policies, procedures and appropriate applicable technical guidance.\n, • Familiar with ship construction, drydock procedures, and marine materials.\n, • Strong understanding of workplace safety in a drydock environment.\n, • Strong interpersonal skills and ability to communicate clearly, accurately and effectively across a wide range of govt, active-duty military and industry personnel.\n, • Effective oral and written communication skills.\n\n, • Be available to perform overtime duties as required for pre-docking, docking, duration of ship docking periods and undocking.\n \n Additional Requirements (Post-Hire): \n\n • Must obtain Tag-out/Lock-out qualification within 30 days \n, • Must obtain PQS 301 Craftsmen qualification within 90 days.\n, • Must obtain Forklift Operator license within 90 days.\n, • Must obtain Dock Rover qualification within 6 months\n, • Must obtain the following qualifications within 12 months: \n\n • Graving Dock Sluice Gate Operator\n, • Graving Dock Caisson Operator\n, • Graving Dock Pump Room Operator\n, • Control Room Operator\n, • Trolley/Winch Operator\n\n\n\n \n ADA Notations: \n\n • Requires walking, reaching, sitting and concentration in the presence of occasional noise\n, • Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways.\n, • Requires the ability to lift, carry and move objects up to 50 lbs. in weight. \n, • Noise conditions range from very quiet to loud.\n\n \n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: With very little or no supervision, the Machine Service Technician 3 - Field will perform duties as assigned by management in the repair, maintenance and/or rebuilding of equipment in the service shop or field, in a safe, efficient and capable manner in the least amount of labor hours necessary, and without re-work. The Machine Service Technician 3 - Field requires work to be completed within 110% of any Flat Rate times that are established as targets. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Perform all requirements outlined in Grade Levels III and IV.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n, • Perform new and used equipment start-up for delivery to end-user.\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and Servicelink (computer programs) and other online tools as required.\n, • Order parts through DBS (Dealer Business System).\n, • Enter labor time daily (DBS).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar and other equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • High school diploma or equivalent provide verification of all formal classroom study or hands on experience related to heavy equipment repairs. \n, • Prefer to have one of the following.\n, • Minimum (8) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level Two Technician program\n, • Knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n\n\n, • Expert working knowledge of hydraulics and powertrains.\n, • Proficient in the repairs of electrical and electronic systems.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Adapts to changes in the work environment;\n, • Manages competing demands; \n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events in a professional manner.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n, • Must have valid California Driver's License with a clean record.\n, • Shop Requirements: Valid California Class "C" driver's license.\n, • Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required.\n\n\n, • Furnish all hand tools required to repair, test and diagnose hydraulic, air, power train, electrical and electronic systems on Caterpillar equipment., • NOTE: Some high dollar value tooling is supplied by Hawthorne.\n\n, • Walking and moving about on foot often through uneven terrain.\n, • Hand/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion.\n, • Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work. \n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Noise: Works in conditions with constant or intermittent noise.\n, • Temperatures/Weather: Works in the field, outside with variations of temperature and weather.\n, • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $44.80 to $53.00 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

Requisition Number: 25582 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $54,755.00 - $67,662.40 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary For over a century, HII has built and maintained the U.S. Navy's most powerful warships. Join us as we continue to maintain the Navy's readiness! We are seeking a Journeyman level Marine Welder to provide support at South West Regional Maintenance Center (SWRMC) Product Family located in San Diego, CA. This Journeyman Welder will be responsible for welding tasks, provide structural and non-structural welding services in-shop and aboard ships. This includes hot work operations, component repair, fabrication and metal forming, pipefitting, and ship-fitting. Welder will also perform accommodation ladder/ship's gangway disassembly, assessment, and component repair to support U.S. Navy operations in San Diego, CA. What You Will Do • Conduct in-shop and on-board welding, including structural and non-structural tasks, hot work, and fabrication., • Repair and maintain accommodation ladders and ship's gangways to support U.S. Navy operations., • Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others., • May provide direction and lead others and May manage one or more multiple jobs., • Completes comprehension of specialty trades functions and tools. Performs a variety of complicated and non-routine tasks., • Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedules, reports and briefs customers and senior management., • May perform quality inspections on finished product. Performs duties outside of specialty in order to complete installation or work assignment.\n What You Must Have • High School education, or Trade School or equivalent, and 6 years of related experience., • Must have at least 6 years of experience with pipe bender, universal iron worker, plate shear, portable plasma cutter, oxygen/acetylene torch, drill press, horizontal band saw, vertical band saw, pipe notcher, finger brake, disc/belt sander, operated various GTAW/SMAW/GMAW welding machines, slip roll forming/bending machine, and portable electrical, pneumatic, and hand tools., • Must provide own hand tools as designated per trades specialty., • Must be able to obtain and maintain CAC ID base access and DoD Secret Security Clearance., • Must be able to obtain and maintain welding qualifications per the following list within ninety (90) calendar days of starting:, • GMAW aluminum plate 5356 in the vertical/horizontal/overhead positions., • SMAW steel plate 11018 in the vertical/horizontal/overhead positions., • GTAW aluminum plate 5356 in the vertical/horizontal/overhead positions., • GTAW 2-1/2" steel pipe 70S2 and RN-82 in the 6G position., • SMAW steel plate 8N12 in the vertical/horizontal/overhead positions., • As required by assignment: Grade III and Grade V Brazing in the vertical/horizontal positions, to include face-feed and insert type fittings., • Must be able to complete training and ceritifications within ninety (90) calendar days of starting:, • OHSA 10hrs, • CPR, • Fall protection training, • Low speed vehicle training (operation of carts), • PQS 301 Craftman qualification, • May be required to obtain forklift license depending on shop need., • Must obtain and maintain Marine Chemist Certification., • Start date contingent upon approval of base access which is required for this position and continued employment. \n Preferred: Bonus Points For • A current, valid DoD confidential clearance or higher., • MIG, TIG, ARC Welder and Brazing certifications. \n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Epsilon Systems Solutions, Inc. has an opportunity available for full time CESE Heavy Equipment Mechanic Technician II in San Diego, CA. Summary: The Heavy Equipment Mechanic Technician II will provide troubleshooting, maintenance, repair and material assessment of various types of Heavy Equipment mechanical systems and components in accordance with OEM technical specifications in CONUS & OCONUS locations, as required. Roles and Responsibilities \n • Uses technical knowledge and experience to troubleshoot and identify causes for equipment/system failure to the component level.\n, • Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions.\n, • Performs Lay-ups and related maintenance checks of Heavy Equipment in mid-level storage program.\n, • Performs Start-ups and related maintenance checks of Heavy Equipment in mid-level storage program.\n, • Provides written reports for all work accomplished and completed action documentation.\n, • Operates air brake equipped vehicles during the course of troubleshooting, maintenance and repair.\n, • Performs other duties as assigned in support of maintenance/repair as required.\n, • Travels oversees when required\n, • Maintains shop equipment.\n, • Ford Power Stroke Engine\n, • Chevy Duramax Engine\n, • Cummins Diesel Engines\n, • John Deere Engines\n, • Kubota Engines\n, • Mercedes Engines\n, • Caterpillar Diesel Engine\n, • Duramax Turbo Diesel Engine\n, • Allison Transmissions\n, • 4L80E Transmission\n, • 15KW and 45KW Generators\n, • IGET HVAC System\n, • Hydraulic Systems for 55 ton Lowboy Trailers\n, • High school diploma or equivalent\n, • Minimum two years of experience repairing and troubleshooting the aforementioned Heavy Equipment\n, • Ability to obtain and maintain a DoD secret security clearance.\n, • Knowledge of proper use of diagnostic equipment.\n, • Possess basic computer skills with working knowledge of Microsoft Outlook, Word and Excel.\n, • Possess effective oral and written communication.\n, • Have extensive knowledge of technical requirements.\n, • Ability to identify complex problems and solutions.\n, • Ability to work in a team environment and be flexible.\n, • Ability to travel overseas when required.\n, • Pursuant to the various government contractual requirements, all applicants must be U.S. Citizens.\n, • Possess a current and valid Passport.\n The pay range for this role is $31.28 - $33.57 hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. ADA Notations: \n • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc).\n, • Ability to be able to work in maintenance shop environment\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.\n, • Travel may be required within and outside of the continental United States.\n, • Job may require bending, stooping, lifting, and will be in an environment of low and high temperatures.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Description If you are looking for an excellent career opportunity with one of the market leaders in constructions and industrial tools and supplies, look no further... Professional Contractor Supply is hiring for a Warehouse/Backup Driver! We offer great benefits and a competitive pay based on experience, qualifications, and certifications. Apply now to learn more as we are looking to hire ASAP! Job Summary The Warehouse/Backup Driver supports daily warehouse operations and completes all warehouse and store duties assigned by the Manager in a timely manner. This position requires teamwork and close interactions with the counter, shipping & receiving, drivers, management, and the outside sales team. Duties include, but are not limited to: Pulling and packaging units for outgoing shipments, affixing shipping labels on packed boxes, staging merchandise for outgoing shipment, and checking invoices to ensure the tools and supplies are correctly pulled and packaged. Also, this position serves as a backup driver and requires operations of a company-owned delivery truck to deliver materials and finished products to serve customers in the local area to deliver product to job sites. The Warehouse/Backup Driver must be self-directed in the absences of supervision, reliably follow traffic laws and company policy to reach work objectives, and set daily priorities to complete all assigned tasks and satisfy customer needs. What We Have to Offer You: We have a competitive wage and benefit package that includes Medical, Dental, Vision, Long-Term Disability, Life Insurance, Vacation, Paid Time Off, Employee Assistance Program, Identity Guard, Legal Assistance, Volunteer Time Off, Paid Parental Leave, and a 401(k) plan with company match. Essential Job Functions/Responsibilities • Pulling and packaging units for outgoing shipments, • Affixing shipping labels on packed boxes, • Staging merchandise for outgoing shipment and loading and unloading merchandise on delivery trucks, • Sorting and placing merchandise in proper stock areas, • Assisting Branch Manager and co-workers in performing assigned tasks, including ensuring the warehouse and shipping areas are neat and orderly and all equipment is kept in safe and efficient condition, • Exercising and promoting safe behaviors and showing unyielding support of programs, rules, and policies regarding safety; Reporting incidents in accordance with company policy, • Keep the Branch Manager informed of shortages, overloads, damaged merchandise, and inventory control, • Operating a company-owned and leased vehicle safely while delivering materials, products, and parts to customers and jobsites, • Following traffic laws at all times, • Obtaining signatures on delivery and pick-up invoices or signed slips, • Following assigned scheduling and routing of deliveries; making deliveries in a timely manner as scheduled, • Following maintenance schedule for truck services and repairs; taking vehicle for service when instructed to do so, • Reporting any mechanical problems to direct supervisor and maintaining vehicle in a neat and clean conditions, • Maintain a neat appearance in accordance to company dress code policy; always remain courteous and service-minded while dealing with other employees and customers, • Protect and maintain confidentiality of company trade secrets and other confidential or proprietary information including, without limitation, operations methods, customer information, and sales data, • Maintains punctuality and regular and reliable attendance, • Complete projects and assignments on time, • Attending department meetings and trainings as requested, • Must possess a valid CA driver's license and have a clean driving record. Following a conditional offer of employment, a motor vehicle record will be conducted., • A minimum of 2 years driving experience over 16ft trucks, forklifts, and man lifts., • Must be familiar with the local area and have the ability to read directions and use street maps to plot delivery service route, • Must be physically able to lift up to 50lbs in order to load and deliver packages, • Must be a dependable worker with the ability to carry out a series of work instructions without constant supervision, • Must be proficient in computer and general internet usage, • Must be able to create a positive and productive working relationship with employees and customers, • Must be able to work independently and use effective problem solving skills to resolve issues, • May be required to work some Saturdays for inventory PCS is an Equal Opportunity Employer and drug-free workplace. This is a safety-sensitive position and, in the determination of PCS, the presence of THC could adversely affect the safety of others.

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview \n • Performs all tasks in a safe manner, wearing required PPE and following all safety regulations. \n, • Know and understand all Safety rules and guidelines to ensure work is performed safely.\n, • Review work orders with resource as they are received, ask for clarification and confer with the requestor for additional clarification when needed.\n, • Originate and process emergency work orders when necessary.\n, • Have a clear understanding of and strictly comply with LO/TO policy.\n, • Use computer managed system to find needed parts for repairs.\n, • Maintain written documentation of work performed.\n, • Complete PMs as required both safely and procedurally. \n, • Troubleshoot an inoperable machine or piece of equipment made in house. Work may involve installing, servicing, replacing, and/or repairing any machine or equipment plant-wide, with or without schematics. Exact skills will be based on competencies known and properly trained in. Specifics of this could be:\n, • Calibrate different instrument types.\n, • Operate basic and advanced shop tools as required to maintain or repair equipment.\n, • General cleaning to maintain clean work areas.\n, • Shift to shift communication and with members of the maintenance or operational team.\n, • Ability to work a set schedule.\n, • Willingness and ability to train on new technology.\n, • Trained of cranes, rigging and hoists.\n, • Reads drawings, prints & sketches.\n, • Strong analytical and problem solving skills.\n, • Ability to prioritize and effectively utilize available resources.\n, • Train others as needed\n, • Works overtime as needed\n, • Other duties as assigned\n, • Forklift Experience.\n, • Hazardous Waste Management.\n, • Ability to drive company Vehicles.\n\n Job Requirements \n • Area may or may not be air conditioned or heated and may be humid and hot or cold depending on seasonal conditions.\n, • Exposure to hot and/or abrasive surfaces.\n, • Required to be in tight spaces and heights on occasion.\n, • Possible exposure to noise levels over 90 decibels for 12 hours at certain locations. Participation in hearing conservation program required\n, • Moving machinery or moving objects on production floor.\n, • Floor surfaces are slippery at times.\n, • Exposure to chemicals which may cause eye or skin irritation and/or burns, and irritation to respiratory system.\n, • Exposure to static electricity on occasion.\n, • Exposure to and use of sharp implements at times.\n, • Exposure to outside elements on occasion.\n\n What your background should look like Typically requires a minimum of 6 years of related work experience. Requires completion of high school. Vocational training or an AA degree is preferred. High School Diploma or GED Journeyman's License Preferred CPR/FA/BBP Certification 5+ years of manufacturing experience in a maintenance role Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). COMPENSATION • Competitive base salary commensurate with experience: $63,300 - $95,000 (subject to change dependent on physical location), • Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity., • Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities.

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview • Performs all tasks in a safe manner, wearing required PPE and following all safety regulations., • Know and understand all Safety rules and guidelines to ensure work is performed safely., • Review work orders with resource as they are received, ask for clarification and confer with the requestor for additional clarification when needed., • Originate and process emergency work orders when necessary., • Have a clear understanding of and strictly comply with LO/TO policy., • Use computer managed system to find needed parts for repairs., • Maintain written documentation of work performed., • Complete PMs as required both safely and procedurally., • Troubleshoot an inoperable machine or piece of equipment made in house. Work may involve installing, servicing, replacing, and/or repairing any machine or equipment plant-wide, with or without schematics. Exact skills will be based on competencies known and properly trained in. Specifics of this could be:, • Calibrate different instrument types., • Operate basic and advanced shop tools as required to maintain or repair equipment., • General cleaning to maintain clean work areas., • Shift to shift communication and with members of the maintenance or operational team., • Ability to work a set schedule., • Willingness and ability to train on new technology., • Trained of cranes, rigging and hoists., • Reads drawings, prints & sketches., • Strong analytical and problem solving skills., • Ability to prioritize and effectively utilize available resources., • Train others as needed, • Works overtime as needed, • Other duties as assigned, • Forklift Experience., • Hazardous Waste Management., • Ability to drive company Vehicles.\n Job Requirements • Area may or may not be air conditioned or heated and may be humid and hot or cold depending on seasonal conditions., • Exposure to hot and/or abrasive surfaces., • Required to be in tight spaces and heights on occasion., • Possible exposure to noise levels over 90 decibels for 12 hours at certain locations. Participation in hearing conservation program required, • Moving machinery or moving objects on production floor., • Floor surfaces are slippery at times., • Exposure to chemicals which may cause eye or skin irritation and/or burns, and irritation to respiratory system., • Exposure to static electricity on occasion., • Exposure to and use of sharp implements at times., • Exposure to outside elements on occasion.\n What your background should look like Typically requires a minimum of 6 years of related work experience. Requires completion of high school. Vocational training or an AA degree is preferred. High School Diploma or GED Journeyman's License Preferred CPR/FA/BBP Certification 5+ years of manufacturing experience in a maintenance role Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). COMPENSATION • Competitive base salary commensurate with experience: $63,300 - $95,000 (subject to change dependent on physical location), • Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity., • Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities. Location: EL CAJON, CA, US, 92020 City: EL CAJON State: CA Country/Region: US Travel: None Requisition ID: 141716 Alternative Locations: Function: Manufacturing Nearest Major Market: San Diego Job Segment: Maintenance Mechanic, Machinist, Electrical, Web Design, Equity, Manufacturing, Engineering, Creative, Finance

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: As a technician, with minimal supervision, the Machine Service Technician 2 - Field is responsible for providing high quality repairs on Caterpillar and allied equipment. The Machine Service Technician 2 - Field will diagnose and troubleshoot engines, powertrains, electrical, and hydraulic systems; experience with cat diagnostic equipment, Cat repair tooling, rigging, and blocking equipment is essential. Due to multiple projects the Machine Service Technician 2 - Field will be assigned, this position requires planning and organization skills with a particular emphasis on controlling job costs. The Machine Service Technician 2 - Field will investigate, analyze, and identify issues in order to make recommendations for the appropriate repairs. Our technicians work with a variety of people, communication skills that include strong interpersonal skills, effective writing, basic computer skills, and ability to respond to the lead technicians/management in a positive, caring, and timely manner is required. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and Servicelink (computer programs) and other online tools as required.\n, • Order parts through DBS (Dealer Business System).\n, • Enter your labor time daily (DBS).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • High school diploma or equivalent\n, • Prefer to have one of the following.\n, • Five to eight (5-8) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level One Technician program\n\n\n, • General knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Ability to adapt to changes in the work environment;\n, • Manages competing demands;\n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n, • Must have valid California Driver's License with a clean record.\n, • Shop Requirements: Valid California Class "C" driver's license.\n, • Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required.\n, • Furnish all hand tools required to repair, test and diagnose hydraulic, air, power train, electrical and electronic systems on Caterpillar equipment., • NOTE: Some high dollar value tooling is supplied by Hawthorne.\n\n, • Walking and moving about on foot often through uneven terrain.\n, • Hands/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion. Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work.\n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications, in writing, and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Noise: Works in conditions with constant or intermittent noise.\n, • Temperatures/Weather: Works in the field, outside with variations of temperature and weather.\n, • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $36.80 - $43.80 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: As a technician, you are responsible for providing high-quality repairs on Caterpillar and allied equipment. You will diagnose and troubleshoot engines, powertrains, electrical, and hydraulic systems; experience with Cat diagnostic equipment, Cat repair tooling, rigging, and blocking equipment is preferred. Due to the multiple projects, you will be assigned, this position requires planning and organization skills with a particular emphasis on controlling job costs. You will investigate, analyze, and identify the problem to make recommendations that eliminate issues. Our technicians work with a variety of people, communication skills that include strong interpersonal skills, effective writing, basic computer skills, and ability to respond to the lead technicians/management in a positive, caring, and timely manner is required. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose issues on all Caterpillar and allied equipment.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation in arrangement application based on theory of design.\n, • Effectively communicate with peers and supervisors.\n, • Organize jobs in a logical and economical sequence.\n, • Utilize Cat Interact/ ServiceLink and other systems (computer programs) as required.\n, • Order parts through DBS (Dealer Business System).\n, • Enter labor time daily (DBS).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • High school diploma or equivalent\n, • Two to five (2-5) years of experience in the repair of Caterpillar products, or other heavy equipment.\n, • Prefer to have one of the following:\n, • Successful completion of apprenticeship program.\n, • Graduation from an accredited technical school with emphasis on diesel technology.\n\n\n, • General knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Ability to adapt to changes in the work environment;\n, • Ability to manage competing demands;\n, • Able to change approach or method to best fit the situation;\n, • Able to deal with frequent change, delays, or unexpected events.\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Performs the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possesses basic computer knowledge and ability to use service software required in position.\n, • Must have valid California Driver's License with a clean record.\n, • Shop Requirements: Valid California Class "C" driver's license.\n, • Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required.\n\n\n, • Furnish all hand tools required to repair, test and diagnose hydraulic, air, power train, electrical and electronic systems on Caterpillar equipment., • NOTE: Some high dollar value tooling is supplied by Hawthorne.\n\n, • Contributes to building a positive team spirit; Puts success of team above own interests;\n, • Able to build morale and group commitments to goals and objectives;\n, • Walking and moving about on foot often through uneven terrain.\n, • Hands/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion. Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work.\n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications, in writing, and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Noise: Works in conditions with constant or intermittent noise.\n, • Temperatures/Weather: Works in the field, outside with variations of temperature and weather.\n, • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $33 - $35.97 per hour (plus $1.50 field differential for field positions)\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: With very little or no supervision, will perform duties as assigned by management in the repair, maintenance and/or rebuilding of equipment in the service shop or field, in a safe, efficient and capable manner in the least amount of labor hours necessary, and without re-work. This position requires work to be completed within 110% of any Flat Rate times that are established as targets. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n\n, • Perform new and used equipment start-up for delivery to end-user.\n\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and ServiceLink (computer programs) and other online tools as required.\n, • Enter labor time daily (ServiceLink).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar and other equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • Perform other duties as assigned.\n\n EDUCATION, EXPERIENCE, AND SKILLS REQUIRED: \n • High school diploma or equivalent provide verification of all formal classroom study or hands on experience related to heavy equipment repairs. \n, • Prefer to have one of the following.\n, • Minimum (10) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level Two Technician program\n, • Knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n\n\n, • Expert working knowledge of hydraulics and powertrains.\n, • Proficient in the repairs of electrical and electronic systems.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Adapts to changes in the work environment;\n, • Manages competing demands;\n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events in a professional manner.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required. • Contribute to building a positive team spirit; puts success of team above own interests; able to build morale and group commitments to goals and objectives; supports everyone's efforts to succeed.\n PHYSICAL DEMANDS: \n • Walking and moving about on foot often through uneven terrain.\n, • Hands/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion.\n, • Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work.\n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Laying: Lies in prone position under vehicles and equipment. \n\n ENVIRONMENTAL: Noise: Works in conditions with constant or intermittent noise. Temperatures/Weather: Works in a warehouse and outside with variations of temperature and weather. Exposure: Foul odors, fumes and harsh substances. HERE'S WHAT WE OFFER... \n • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $44.00 - $53.00 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

Job Description Coho Technology Solutions is seeking a skilled and safety-focused Ship to Shore Electrician to support shore power operations for the Navy in San Diego. This hands-on role involves the connection, maintenance, and repair of high-voltage shore power systems to naval and private vessels, as well as contractor and government equipment on piers and barges. This position is ideal for a self-motivated individual with a strong background in electrical systems, who is comfortable working in physically demanding and variable environments, including emergency call-back scenarios. Key Responsibilities: • Connect and disconnect temporary electrical power services to/from vessels and equipment., • Lay out, splice, test, and handle shore power cables weighing up to 10 lbs/foot., • Manufacture, maintain, and repair cables rated up to 4160 volts and 400 amps., • Troubleshoot and repair electrical components including switches, motors, controllers, breakers, and plugs (24V DC to 4160V AC)., • Operate and maintain low-voltage power breakers, motor controllers, and other associated equipment., • Read and interpret blueprints, schematics, and technical manuals to perform electrical diagnostics and repairs., • Follow electrical codes, safety standards, and company protocols., • Operate heavy equipment including:, • 70-ton vehicle-mounted crane (Class B CDL required or ability to obtain), • 6,000 lbs – 15,000 lbs rated forklift, • 10-ton boom truck, • Use hand, hydraulic, and pneumatic tools to install and connect cables and electrical systems., • Troubleshoot complex cabling systems, shipboard distribution systems, voltage regulators, and telecommunication circuits., • Inspect and maintain hydraulic systems., • Perform physically demanding tasks including heavy lifting (>45 lbs), climbing, working in awkward positions, and accessing confined spaces or elevated platforms., • Experience: Demonstrated experience working with high-voltage electrical systems and marine/industrial environments., • Licensing: Must be able to obtain a Class B Commercial Driver's License (CDL)., • Technical Skills: Strong knowledge of electrical theory, codes, and regulations., • Tools & Equipment: Proficient in the use of electrical test equipment, hand tools, hydraulic and pneumatic tools., • Physical Requirements: Ability to perform physically strenuous tasks and work in diverse environmental conditions., • Communication: Ability to follow both verbal and written instructions and work independently with minimal supervision., • Availability: Willingness to respond to emergency callbacks on nights, weekends, and holidays. Position Pay Range$33.87—$33.87 USD About Copper River & The Native Village of Eyak: Owned by the Native Village of Eyak (NVE), a federally recognized Alaska Native Tribe, the Copper River Family of Companies are a collection of entities that deliver a complementary set of solutions and services to support the diverse missions and requirements of our clients. Proud participants of the Small Business Administration's (SBA) 8(a) Business Development Program since 2006, our companies consist of both current and graduation SBA 8(a) entities. It is our collective purpose to support the Tribe and diversify the NVE's ability to facilitate economic advancement. The income generated from our companies helps the Native Village of Eyak fund health and social services, economic development, natural resource/environmental education, jobs, job training, and other benefits to the NVE in a manner that is consistent with Alaskan Native cultural values and traditions. Copper River's Culture The Copper River Family of Companies has a positive, supportive, and thriving culture. At the foundation of our culture is a focus on collaboration. No matter your role or which operating company you work for, we are ONE TEAM working toward the same goals for our customers and for our collective owner- The Native Village of Eyak. How we treat each other is just as important as the work we deliver. Benefits • Comprehensive medical, dental, and vision coverage, • Flexible Spending Account - healthcare and dependent care, • Health Savings Account - high deductible medical plan, • Retirement 401(k) with employer match, • Open leave policy and paid holidays Disclaimer: The Copper River Family of Companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Requisition Number: 25582 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $54,755.00 - $67,662.40 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary For over a century, HII has built and maintained the U.S. Navy's most powerful warships. Join us as we continue to maintain the Navy's readiness! We are seeking a Journeyman level Marine Welder to provide support at South West Regional Maintenance Center (SWRMC) Product Family located in San Diego, CA. This Journeyman Welder will be responsible for welding tasks, provide structural and non-structural welding services in-shop and aboard ships. This includes hot work operations, component repair, fabrication and metal forming, pipefitting, and ship-fitting. Welder will also perform accommodation ladder/ship's gangway disassembly, assessment, and component repair to support U.S. Navy operations in San Diego, CA. What You Will Do • Conduct in-shop and on-board welding, including structural and non-structural tasks, hot work, and fabrication., • Repair and maintain accommodation ladders and ship's gangways to support U.S. Navy operations., • Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others., • May provide direction and lead others and May manage one or more multiple jobs., • Completes comprehension of specialty trades functions and tools. Performs a variety of complicated and non-routine tasks., • Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedules, reports and briefs customers and senior management., • May perform quality inspections on finished product. Performs duties outside of specialty in order to complete installation or work assignment.\n What You Must Have • High School education, or Trade School or equivalent, and 6 years of related experience., • Must have at least 6 years of experience with pipe bender, universal iron worker, plate shear, portable plasma cutter, oxygen/acetylene torch, drill press, horizontal band saw, vertical band saw, pipe notcher, finger brake, disc/belt sander, operated various GTAW/SMAW/GMAW welding machines, slip roll forming/bending machine, and portable electrical, pneumatic, and hand tools., • Must provide own hand tools as designated per trades specialty., • Must be able to obtain and maintain CAC ID base access and DoD Secret Security Clearance., • Must be able to obtain and maintain welding qualifications per the following list within ninety (90) calendar days of starting:, • GMAW aluminum plate 5356 in the vertical/horizontal/overhead positions., • SMAW steel plate 11018 in the vertical/horizontal/overhead positions., • GTAW aluminum plate 5356 in the vertical/horizontal/overhead positions., • GTAW 2-1/2" steel pipe 70S2 and RN-82 in the 6G position., • SMAW steel plate 8N12 in the vertical/horizontal/overhead positions., • As required by assignment: Grade III and Grade V Brazing in the vertical/horizontal positions, to include face-feed and insert type fittings., • Must be able to complete training and ceritifications within ninety (90) calendar days of starting:, • OHSA 10hrs, • CPR, • Fall protection training, • Low speed vehicle training (operation of carts), • PQS 301 Craftman qualification, • May be required to obtain forklift license depending on shop need., • Must obtain and maintain Marine Chemist Certification., • Start date contingent upon approval of base access which is required for this position and continued employment. \n Preferred: Bonus Points For • A current, valid DoD confidential clearance or higher., • MIG, TIG, ARC Welder and Brazing certifications. \n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse.You will ensure the safe and efficient handling of goods, supporting the overall operations of the warehouse and facilitating the timely r

Job DescriptionCompany Description Vuori is re-defining what athletic apparel looks like: built to move and sweat in but designed with a casual aesthetic to transition into everyday life. We draw inspiration from an active coastal California lifestyle; an integration of fitness, creative expression and life. Our high energy fast paced retail environment is reflected in the clothes we make. We aim to inspire others to take on all aspects of their lives with clarity, enthusiasm and purpose…while having a lot of fun along the way. We are proud to be an outlet for opportunity and for personal growth and success. Job Description The hybrid “Forklift Driver/Returns Specialist” will split their time between assisting with all tasks that require a forklift, and processing returns for ECOM and Wholesale channels in a fast-paced, high-volume environment. As a (certified) forklift driver, you will cautiously load and unload pallets onto delivery trucks and assist with placing pallets on the racking. These tasks will account for about 20% of your total workday. Safety and awareness are your top priorities! The Returns Specialist aspect includes being responsible for grading the condition of returned products with keen attention to detail and guaranteeing only brand new, unworn items are resold to our Vuori customers. Using a computer and scan application, you will process the returns into our ERP and issue refunds to our customers. Returns Specialists work cross functionally with the Customer Service and Wholesale Teams to confirm proper refunds are issued in a timely manner. What you'll get to do: • Receiving and processing returns, • Loading/Unloading trucks, • Quality grading and inspection of returned items, • Creating transfers to the DC, • Work cross functionally with other departments, • Folding and repackaging, • Provide quality feedback to leadership Qualifications Who you are: • Forklift Certified!, • Clean driving record, • Warehouse or retail experience, • Extremely cautious and aware, • Responsible and courteous, • Basic computer and Microsoft Office skills, • Ability to work in a fast-paced environment, • Highly organized and detail oriented, • Ability to self-manage and assist fellow team members, • Must be able to safely lift and carry up to 50 lbs Additional Information Our investment in you: At Vuori, we’re proud to offer the following to our employees: • Health Insurance, • Savings and Retirement Plan, • Employee Assistance Program, • Generous Vuori Discount & Industry Perks, • Paid Time Off Vuori is proud to be an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. All your information will be kept confidential according to EEO guidelines.

Job DescriptionAbout Capricor Therapeutics Capricor Therapeutics, Inc. (NASDAQ: CAPR) is a cutting-edge biotechnology company focused on the discovery and development of novel therapies for the treatment or prevention of rare diseases. Our lead product candidate, allogeneic Cardiosphere-Derived Cells (CDCs), known as CAP-1002, is being investigated as a treatment for Duchenne muscular dystrophy. Additionally, we are advancing our exosomes platform technology for inflammatory indications and developing a novel vaccination approach against COVID-19. Capricor is undergoing a manufacturing technology transfer to produce CAP-1002 for late-stage clinical trials and establish a commercial-scale process, while also developing manufacturing processes for exosome-based vaccines. Join our expanding team to contribute to transformative therapies that address unmet medical needs. Position Overview The Warehouse Supervisor directly manages warehouse teams and ensures day-to-day operations meet regulatory, quality, and efficiency standards. Reporting to the Warehouse Manager, this role involves overseeing team performance, compliance, process improvements, and coordination across departments in a dynamic GMP environment. The ideal candidate is a highly motivated leader with strong supervisory experience in warehouse and logistics operations, capable of driving results while adapting to business needs in a collaborative biotech setting. Responsibilities * Capable of performing all warehouse activities to support operations as needed. * Manages team scheduling, performance evaluations, and conducts audits to maintain high standards. * Initiates and completes investigations, corrective and preventive actions (CAPAs) to address issues promptly. * Initiates and completes change controls and supports their implementation. * Updates and creates Standard Operating Procedures (SOPs) and work instructions. * Oversees investigations and resolves inventory discrepancies. * Reviews metrics and leads process improvements to enhance efficiency. * Coordinates with internal departments and ensures team training compliance. * Supports multiple warehouses, including being onsite and traveling between sites as required. * Flexible with shifts and hours to support business needs (e.g., first shift, staggered shifts, and future changes for development and expansion projects). * Conducts meetings utilizing Microsoft Teams, Outlook, and collaborates with partners to drive results. * Supports data collection for Key Performance Indicators (KPIs) in warehouse operations. * Performs all tasks as needed when assigned by the Warehouse Manager. Requirements * Education: GED or Diploma required; Associate’s or Bachelor’s degree preferred. * Experience: * 7+ years in warehouse operations, including 2+ years in a supervisory role; equivalent combination of experience considered. * 4+ years with adept understanding of cGMP, cGDP, and ISO 9001 in biotech, pharma, or related fields. * 2-4+ years in supply chain and logistics. * 2-4+ years operating forklift, box trucks, and associated warehouse equipment. * 2-4+ years in shipping cGMP and cold chain shipping experience. * 2-4+ years with DOT 49CFR and IATA regulations. * 2-4+ years managing staff. * Technical Skills: Strong proficiency in ERP systems and compliance documentation. * Competencies: * Drives Results: Demonstrates accountability and achieves goals under challenging conditions. * Collaborates: Builds relationships and works effectively with others. * Plans and Aligns: Strategically prioritizes tasks and anticipates obstacles. * Manages Ambiguity: Maintains composure in uncertainty and adapts quickly. * Courage: Addresses difficult issues with confidence. * Manages Complexity: Analyzes information for sound decisions. Work Environment and Physical Demands * Setting: Primarily warehouse-based with some office activities, focusing on logistics, inventory management, and team oversight in a GMP-compliant facility. * Physical Requirements: Ability to stand or walk for extended periods; frequently lift or move objects up to 50 pounds; operate warehouse equipment such as forklifts and box trucks; use arms, hands, and fingers to handle, feel, or reach; ability to climb, balance, stoop, kneel, or crouch as needed; travel between sites and flexibility with shifts. Why Capricor? Capricor Therapeutics is an industry leader in cell and exosome therapy, pushing boundaries to create innovative treatments that raise the standard of care. Grounded in integrity and driven by science, our team is committed to making a meaningful impact through patient-centered innovation. Join us and be part of a team that’s changing lives—help us shape the future of healthcare. Compensation (USD) * Salary Range: Competitive, commensurate with experience. * Benefits: Comprehensive benefits package, including health insurance, retirement plans, equity awards, and opportunities for professional development. Come Work with Us! At Capricor, we offer a collaborative work environment that supports your professional growth. Join a passionate team committed to transforming the lives of patients and pushing the boundaries of medical science.

Job DescriptionILO Warehouse Manager Scope: The contractor shall provide an ILO Warehouse Manager responsible for overseeing the daily operations of EODESU ONE's physical ILO warehouse in support of Navy EOD-specific Table of Allowance (TOA) logistics. The position encompasses directing, developing, and performing logistics management functions to plan, coordinate, and evaluate the logistical actions necessary to support the command's mission and its expansive growth. They must navigate assignments that require timeliness, flexibility, and the ability to address frequent, short-fused requirements by formulating solutions and providing actionable recommendations. Balancing day-to-day operations with the prioritization of urgent objectives, while maintaining the continuity of ongoing activities, is a constant and essential aspect of this role. Complexity: Serve as a subject matter expert in mission management, life-cycle sustainment, and materiel readiness, leveraging diverse supply, finance, and logistics management processes to analyze information, evaluate subordinate unit performance, and recommend process, planning, or funding adjustments. Utilize professional judgment to plan, organize, and execute intricate analytical decisions in a dynamic environment with shifting priorities, ensuring maximum mission effectiveness. Oversee multifaceted planning, information systems, and management programs impacting EOD, MDSU, and U.S. Navy operations. Develop and implement innovative methods, prioritize competing requirements, and resolve highly challenging issues under pressure. Monitor performance, identify areas for improvement, design and implement measurement tools, and validate outcomes, ensuring resourceful and strategic decision-making in support of mission-critical objectives. Major Duties & Responsibilities: • Direct all warehouse functions including issue,receipt,storage,shipment,and maintenance of TOA equipment and materials in accordance with established Navy supply procedures and command, • Serve as the lead for inventory management, materiel readiness,and life cycle sustainment planning for EODGRU ONE units., • Interface regularly with Echelon IV–VI commands and ensure accurate warehouse data entry in DPAS and related Navy logistics systems., • Conduct and supervise all warehouse audits, inspections, and corrective actions related to missing/lost/stolen property, FLIPLs, and DRMO transfers., • Provide TOA subject matter expertise to Equipment Review Boards (ERBs), including recommendations for technical refresh, phased replacement, and urgent requirement, • Coordinate and track TOA items requiring Depot Level Repair(DLR), maintaining audit-ready records for asset check-in/check-out. Knowledge Required by the Position: • Demonstrated expertise in logistics management concepts, including coordination and integration of supply-related operational issues to support complex missions effectively., • Proficient in supply programs, policies, nomenclature, and automated record-keeping systems,with the ability to analyze and resolve logistical problems., • Skilled in qualitative and quantitative methods for assessing and improving management processes and systems., • Thorough knowledge of contracting procedures and policies, including proficiency with online tools like Wide Area Work Flow (WAWF) for contractor performance management and reporting., • Comprehensive understanding of supply and property book regulations, directives, and SOPs to manage and control equipment, property, and supplies effectively., • Knowledge of government and commercial shipping and receiving operations to oversee supply department performance and address capability gaps., • Familiar with Naval Expeditionary Combat Command structure, mission requirements, and internal policies, with the ability to operate effectively in a senior staff capacity., • Proficient in using Microsoft Office software(Word,PowerPoint,Excel,Access,andOutlook)and specialized DOD/DON software applications, including DPAS, OMMSNG, and DRRS-S., • Experienced with the EOD Force Table of Allowance(TOA),including knowledge of equipment characteristics and related directives, manuals, and instructions., • StrongworkingknowledgeofNavyEODmissionareas,NavyandJointMilitaryForces,andall Navy Expeditionary Combat Command forces., • Resourceful in large-scale inventory and warehouse management, including Defense Property Accountability System(DPAS)operations, with an emphasis on accuracy and accountability for mission-critical equipment., • Skilledcommunicatorwithexcellentwrittenandoralcommunicationabilities,capableofpresenting facts, recommendations, and reports clearly and concisely., • Proficient in data visualization, including developing spreadsheets,charts, and graphs to support decision-making., • Strong interpersonal and team work skills, with a high degree of self-motivation and the ability to work independently., • Experienced in managing inventory across Navy Echelon IV and V Commands, with expertise in resource management for over $150 million in mission-essential equipment., • Knowledgeable in Navy Maintenance and Material Management(3M) programs and TOA Viewer Program for inventory accuracy and reporting., • Adept at supporting audit,inspection,and investigation processes by justifying policies and procedures related to property accountability.Training and Requirements:, • Minimum five(5)years of DoD logistics experience supporting Navy EOD operations in a warehouse environment., • Demonstratedexperiencemanagingphysicalwarehouseoperations,includingmaterielreceipt, issue, storage, shipping, and inventory accountability., • Proficient in the use of DPAS for property tracking and accountability,with emphasis on physical TOA commodity management., • Familiarity with Navy and DoD equipment handling procedures,including oversight of inspection, maintenance, and calibration cycles., • ExperiencepreparingandprocessingDD1348-1A,DD1149,DD200(FLIPL),and MLSR, • Knowledge of DRMO/ disposition procedures and depot-level repair(DLR), • Strong understanding of NAVSUPP-485, COMNECCPACINST2B, and relevant NECC TOA guidance., • Proficient in Microsoft Excel and SharePoint for inventory tracking, documentation, and, • Must have,or be able to obtain or renew, a Forklift Operator's Job Posted by ApplicantPro

Job Description Job Description SOUTH BAY SANDBLASTING & TANK CLEANING, INC. located in San Diego, CA shipyard related subcontractor looking to hire a Warehouse Supervisor. Must be in San Diego California, we are not looking to relocate candidates at this time. Responsibilities: • Excellent leadership skills, including the abilities to set goals, motivate and manage conflict., • Effective communication skills, including writing, speaking and active listening., • Great interpersonal skills, • Good project management skills, including strong decision-making, problem-solving and strategic planning abilities., • Exceptional time management and organization skills, • In-depth understanding of industry and company best practices for the warehouse, • Familiarity with bookkeeping, inventory control practices and logistics, • Comfortable using inventory management software and other organizational computer applications., • Physical strength, stamina, and the ability to walk or stand for long periods of time. Requirements: • Three or more years of experience in a warehouse role managing hourly employees., • Proficiency with warehouse procedures and policies, • Excellent problem-solving skills and leadership qualities, • Ability to work collaboratively with all levels of company staff., • Ability to deliver effective feedback, both written and verbal, • License to operate a forklift. Education Requirements: • High school diploma or GED, Technical/Vocational trade school, or apprenticeship Working Conditions and Physical Demands: • Ability to lift up to 50 pounds and carry the same for short distances and up and down stairs and steep inclines, • The work requires long periods of sitting in awkward positions, standing on a variety of surfaces and at differing angles, bending over, crouching, and climbing up and over obstructions such as scaffolding, ladders, and internal barge and boat structural members. Other requirements: All positions require a pre-employment medical test. This employer participates in E-Verify. Must be able to qualify for DBIDS security clearance. Ability to read technical English is a must. U.S. Citizenship is preferred (for some work locations it is required). Must be authorized to work in the U.S. To respond to this ad, you: Please respond to this ad on our website: Women, veterans, and their spouses are encouraged to apply. We are an Equal Opportunity Employer. EEO/AA M/F D/V Job Type: Full-time Job Posted by ApplicantPro

Job DescriptionSalary: $27-$32 Position Summary: The Warehouse Supervisor is responsible for overseeing the day-to-day operations of the warehouse, supervising staff, ensuring compliance with safety and quality standards, and optimizing inventory and logistics processes. This role is strategic and managerial, focusing on team leadership, process improvement, and cross-department coordination. Key Responsibilities: Qualifications & Skills: Proven experience in warehouse management or supervisory roles. Forklift experience and prior certification (required) Strong leadership, organizational, and communication skills. Knowledge of inventory management systems and logistics software. Experience with NetSuite preferred. Ability to draft, implement, and enforce SOPs and safety regulations. Experience with team performance management and operational reporting (especially in a manufacturing or distribution environment).

Job Description PAY RATE: $17.00 hour ABOUT THE ARC The Salvation Army (TSA) Adult Rehabilitation Center (ARC) is a no-fee program to assist men & women in their journey to complete our rehabilitation program. We are grateful for the contributions our valued employees make toward the maintenance and effectiveness of the programs. The organization is indebted to and dependent on the diligence and devotion of its employees. ABOUT OUR OPERATIONS TEAM Become part of the dedicated Operations Team at The Salvation Army! Together we can continue to serve and impact our local community, through the commitment to “Do The Most Good” at our San Diego Distribution Center, which supports the Adult Rehabilitation Program. This is an opportunity to work as team and utilize your skills to perform various warehouse activities, while contributing to the success of our Program and its participants. EMPLOYEE BENEFITS OFFERED • Opportunity for career growth, • Paid time off, • Employee Stores Discounts, • Great Work Perks Discounts (amusement parks, museums, services and more!), • Medical, Dental, and Vision, • Health and fitness Fitbit Devise, • Retirement Plan, • Legal Advice MetLife, • Pet Insurance, • AFLAC, • High School Graduate., • Valid driver’s license., • Must pass TSA driver and safety training series., • Demonstrated ability to lead, coach, train, and motivate others, • Ability to communicate effectively with fellow employees and donors., • Proficient with Microsoft Office Suite, • Working knowledge of DOT rules and regulation, • An understanding of Safety Rules for Dock and Transportation, • Minimum of five years minimum light industrial, transportation, or operations’ experience., • Ability to sit, walk, stand, bend, squat, climb, kneel, and twist on an intermittent or continuous basis., • Ability to grasp, push, pull objects such as files, file cabinet drawers, clothing carts, merchandise carts, rolling clothing racks, fixtures, furniture dollies, platform trucks and carts, hand trucks and miscellaneous carts., • Ability to operate a telephone., • Ability to lift up to 50 lbs., • Ability to operate a motor vehicle., • Ability to operate forklift., • Direct training and supervision of Drivers/Material Handler and beneficiaries assigned to the transportation department. Responsible for training and supervision of beneficiaries who are assigned as truck’s helpers., • Dispatches trucks daily ensuring on time delivery of store product and neat and orderly donation sites., • Dispatches trucks daily ensuring 100% donor pickups for Real Estate for Rehabilitation and Corporate pickups., • Ensure each truck, tractor and trailer meets TSA standards and supports production and retail operations. Supervise the donation operations to include donation attendant training, donation locations, donation bin placement,, • Supervise the donation operations to include donation attendant training, donation locations, donation bin placement, and donor relations. Ensures a quality donation experience for donors., • View SmartDrive reports each morning, giving proper coaching/disciplinary action as necessary., • Plan and conduct weekly Transportation Team meetings per ARC Policies., • Review and approve all direct report timecards, assure compliance with Wage and Hours requirements., • Ensure loading and unloading equipment is safe and operable to include carts, dollies, load binders, flat carts, etc., • Assures safety measures established and maintained by ARC policy and government regulations., • Plays critical role in driving company culture change efforts and change management processes, • Must always be prepared for a Center Review and maintain review standards., • Other duties and responsibilities as may be assigned, from time to time, by the Operations Manager. The Salvation Army will comply with all governmental orders and any contractual obligations relative to COVID-19 safety measures, including mandatory vaccination of staff, if required. The Salvation Army will consider requests for exemptions from any such requirements on either religious or medical ground when available.

Job DescriptionDUTIES AND RESPONSIBILITIES Centurum Information Technology is seeking a highly motivated Manager, Operations III to join our team in San Diego, CA. Desired to have 5 years management experience with at least 1+ years of recent Navy C4I(S) in ISEA capabilities analysis and supporting ISEA maintenance data calls; experience in warehouse inventory control management using government-approved, computer-based application software programs, government vehicles, overhead cranes, electric carts and forklifts in support of ISEA inventory/warehouse activities; experience receiving, inventorying, warehousing, and maintaining Radio Frequency Communication Systems materials; Inventory experience is desired to include routine Spot Checks and 100% yearly parts inventories; required to have and maintain a current forklift and overhead crane certificates. REQUIRED SKILLS/YEARS OF EXPERIENCE Manage a team of individuals supporting Shipping and Receiving functions, inventories and material movement. Able to train staff and ensure data entry into government. Understanding of NERP, COLT, SAILOR and other databases a plus Education: High School Diploma or equivalent Travel Required: 0% Work Location: San Diego, CA This position is required to have and maintain a Secret US DoD security clearance. PREFERRED SKILLS Desire prior working knowledge with either MILSATCOM to include Extremely High Frequency (EHF), Super High Frequency (SHF), Global Broadcast System (GBS), Time Division Multiple Access (TDMA) Processor (TIP), Advance TIP (ATIP), Navy Multiband Terminal (NMT) and/or COMSATCOM to include Commercial Wideband Satellite Program (CWSP), Commercial Broadband Satellite Program (CBSP), Navy Senior Leadership Communications–Aircraft (NSLC-A), Television-Direct to Sailor (TV-DTS)/INMARSAT and Environmental Satellite Receiver Processors (ESRP) and/or Assured Command and Control (AC2). REMARKS Must be able to communicate effectively in English, both verbally and in writing. Must be able to interface effectively with all levels of technical and management personnel. Compensation: $38 - $42 an hour. Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience. EOE M/F/Disability/Veteran Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR GfypBiAtPC

Job Description Overview SiteOne Landscape Supply is the largest national distributor of landscaping products across the United States and Canada. As a leading supplier of wholesale goods for green industry professionals, we have a long history of serving those who design, build, and maintain outdoor spaces – from lawns and gardens to golf courses, sport fields and more. We pride ourselves on knowing our customers and their business better than anyone else and providing them with a one-stop shop of extensive inventory covering irrigation, lighting, turf and landscape maintenance, hardscapes, nursery, and pest control supplies. At SiteOne, we are passionate about delivering an outstanding customer experience and will stop at nothing to help our customers win. We know that our associates are the key to this success, and our commitment to the SiteOne DNA and support for our associates through development programs, benefits, and perks align with our vision to "Be a Great Place to Work for Our Associates". We foster a culture of safety, teamwork, and continuous improvement. With over 800 locations and exciting expansion ahead, now is the perfect time to join SiteOne and grow Stronger Together™! Responsibilities Our Bilingual Yard Associates help achieve world-class store performance while contributing to and supporting the overall branch strategy, performance, and growth. Yard Associates organize product for deliveries to job sites and help maintain the overall organization of the branch. What you’ll do: • Unload product from incoming trucks., • Load products into outbound vehicles, both customer and company., • Replenish or move product at the branch as directed., • Assist customers with product selection and provide additional support when needed., • Partner with branch leadership to understand and implement new technologies and ways of working to help positively impact business performance., • Other duties as assigned. Qualifications • Must be able to lift up to 50 pounds on a consistent basis, • Bilingual Proficiency - candidates who are conversational in English/Spanish are preferred., • Must have a safety-minded work ethic, • Must be customer-focused and an enthusiastic, dependable team player, • Ready and willing to learn and adopt new technologies and ways of working, • Green industry experience and familiarity with landscape, hardscape, nursery, forestry, or irrigation products is a plus, • Experience operating equipment such as a forklift, skid steer, or front-end loader also a plus, • Competitive Compensation, • Medical, Dental and Vision plans, • Paid Time Off, Paid Holidays, • DailyPay available!, • 401k with company match, • Tuition Reimbursement, • Lucrative Associate Referral Program, • Company Apparel and Work Boot Vouchers, • Opportunity for Advancement, • Paid Training and Business Certifications Available, • Free Counseling Services/Employee Assistance Program, • Life Insurance and Short- and Long-Term Disability Insurance, • Product Discounts THE INFORMATION CONTAINED HEREIN IS NOT INTENDED TO BE AN EXHAUSTIVE LIST OF ALL RESPONSIBILITIES, DUTIES AND QUALIFICATIONS REQUIRED OF INDIVIDUALS PERFORMING THE JOB. THE QUALIFICATIONS DETAILED IN THIS JOB DESCRIPTION ARE NOT CONSIDERED THE MINIMUM REQUIREMENTS NECESSARY TO PERFORM THE JOB, BUT RATHER AS GUIDELINES. THEY MAY VARY FROM POSITION TO POSITION. SiteOne Landscape Supply is strongly committed to providing equal employment opportunities for all associates and all applicants for employment. All employment decisions at SiteOne-including those relating to hiring, promotion, transfers, benefits, compensation, placement, and termination-will be made without regard to race, color, national origin, genetic information, creed, sex, sexual orientation, gender, gender identity, religion, age, veteran status, uniform service, pregnancy, disability, or any other factor protected by applicable law. If you are ever unsure whether a message is really from SiteOne, here’s how to protect yourself from recruiting scams: • SiteOne will never ask for payment, sensitive personal info, or documents over email, messaging apps., or interviews, • SiteOne job related emails will be sent with a @siteone.com. All other variations are likely fraudulent.