Forklift jobs in Charlotte, North CarolinaCreate job alerts

Overview: Job Status/Type: Full time Position Level: Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Responsible for the maintenance and upkeep of all park requirements related to painting. Prepares surfaces and applies paint, varnish, stain, wall paper, and coatings to help beautify and protect exterior and interior surfaces, trimmings, and fixtures to preserve buildings, equipment, midways and rides. Responsibilities and requirements may vary by location. Benefits: • 3 weeks paid vacation (6 sick days, 8 paid holidays), • Several medical coverage options to fit your needs best, • 401K match, • Maintenance-specific scholarships available, • FREE entry to ALL our parks and water parks! Perks: • Yearly maintenance appreciation week celebration, • Complimentary tickets for friends and family, • Discounts on food and park merchandise, • Responsible for routine painting and wall covering, building maintenance works and checking with management and work order system for day’s assignments and priorities., • Check assigned areas and touch up all paint as needed on all buildings, structures, carts, and signs., • Operates a vehicle, trucks, forklift, pressure washer, sand blaster, spray equipment, air compressors, power lifts, Cushman cart, and two way radio., • Prepare surfaces and remove previous paint to apply paints, stains, shading stains, and clear finishes., • Inspect and refurbish wall surfaces by means of the appropriate materials., • Apply wood finishing by suitably preparing surface., • Determine, cut and apply wallpaper or fabric to walls as requested., • Operate and maintain high pressure low volume spray machines., • Maintain records and logs of Volatile Organic Compound, spray volume, product used and time spent; submit finished work orders to supervisor., • Operate and maintain various power and manual hand tools and spray machines following all established PPE procedures and company policies., • Interacts with various groups and individuals such as immediate supervisor, other managers and staff, coworkers, guests, vendors, and contractors., • Read blueprints and drawings of the project and structures for the execution of assigned job., • Order paint supplies and materials., • Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Cedar Fair Safety guidelines and requirements and reports all unsafe or unusual conditions to supervision., • Meets scheduling availability requirements, including nights, weekends, and holiday periods to meet business needs., • Meets Cedar Fair's attendance requirements as outlined in Cedar Fair's attendance policies., • Adheres to Cedar Fair's Rules of Conduct including specific costuming and grooming standards as outlined in Employee, • Guidelines and other park/division specific policies and procedures., • 18 years of age or older., • High School Diploma or GED., • Valid driver's license., • 4-6 years or any equivalent combination of experience and/or education from which comparable knowledge., • Ability to work at heights up to 50 feet., • Ability to use a stepladder up to 40 feet., • Ability to work nights, weekends and holiday periods to meet business needs., • Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Education: High school graduate or equivalent. Related vocational training preferred. Graphic art, fabricating, and installing signs and/or sign painting training preferred. License or Certification: Trade license or equivalent depending on trade. Valid driver’s license required. Experience: Typically requires 2-4 years of painting experience. Sign painting experience if applicable for the park Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Job Description Warehouse & Yard Associate – DAY SHIFT (7:30AM – 4:00PM | M–F | 70% Forklift Operation) Pay: $18.75/hr (aggressive wage progression program) Tired of night shifts and chaos? We’ve got the solution. Join a fast-growing fencing and decking manufacturer as a Warehouse & Yard Associate and work a consistent Monday–Friday, 7:30AM–4:00PM shift—with occasional OT if you want to stack some extra cash. You’ll be the heartbeat of daily operations—pulling orders, loading trucks, and keeping the yard clean and organized. If you’re forklift-certified and know how to hustle without cutting corners, we want to hear from you. What You’ll Do: • Operate a forklift to load/unload trucks and move materials in the warehouse and outdoor yard, • Pull, prep, and package customer orders accurately, • Receive incoming materials and put them away properly, • Maintain clean, safe, and organized yard and warehouse environments, • Rotate stock to ensure efficient inventory flow, • Complete work orders and shipping documents with accuracy, • 1+ year of experience in a warehouse or yard role, • Forklift experience required – certification is a big plus, • Able to lift up to 60 lbs when needed, • Solid basic math, reading, and writing skills, • Comfortable working both indoors and outdoors, • Experience with building materials or lumber? Even better. Apply today and let’s build something solid together. Company DescriptionFor over a decade, Recruit XL has provided hiring and staffing services to clients in the technology and industrial industries. Our proven hiring strategies have placed hundreds of employees with established and trusted companies throughout North America.For over a decade, Recruit XL has provided hiring and staffing services to clients in the technology and industrial industries. Our proven hiring strategies have placed hundreds of employees with established and trusted companies throughout North America.

Job Description J. R. COLE INDUSTRIES Want a Company who cares? · Family Owned - One of the Last INDEPENDENT CONVERTERS · We treat everyone as family, not the way of huge owners · Excellent pay and benefits · Our average tenure is 14 years · Have been in business for over 45 years of solid growth JOIN A COMPANY THAT TREATS PEOPLE RIGHT! THINK ABOUT IT, ........... GREAT OPPORTUNITY for Experienced SHEETER OPERATOR with previous experience on a sheeter in offset printing operation. This position is responsible for maintaining a steady supply of sheetfed paperboard to the plant. • Full-time- 3rd shift position, • Salary commensurate with experience, • Overtime as needed based on production, • Must be at work on time on a daily basis, • Set up sheeter to assure accurate square cuts, • Pull roll stock for all jobs to be cut and deliver stock to the appropriate area, • Keep the sheeter running at maximum production level, • Responsible for daily maintenance and lubrication of the sheeter and other equipment that is used in the work area, • Unload raw materials from delivery trucks and stack stock in appropriate warehouse and work areas, • Must be capable of operating a hand truck or floor jack, • Required to use forklift and go through training for forklift certification, • Check out stock for quality, • Complete load tickets for each job run and requires computer entry of production data at the sheeter, • Follow all QA procedures pertaining to the sheeter, • May be required to perform several set-ups per shift, • Keep the work area neat and clean, • Able to read and write at high school equivalency, • Have general working knowledge of mathematics (particularly fractions and decimals), • Must be able to use various measuring devices, • Able to read and comprehend job orders, • Must be able to lift 50 to 75 pounds on a regular basis, • Requires continuous standing, bending, lifting and moving moderate loads, • Must be able to readily communicate with supervisor Position located at JRCI- Label Division, 10911 Granite St., Charlotte, NC 28273 (off of Westinghouse Blvd.) • J. R. COLE INDUSTRIES, INC. is a locally owned Charlotte-based manufacturer of pressure sensitive roll labels and folding cartons. We have been in business over 45 years and ship our products all over the U.S. We are certified and verified as a (VOSB) Veteran-Owned Small Business through the Department of Veterans Affairs. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift, • Sunday night through Thursday night, • Night shift, • Overtime, • Weekends as needed

Job DescriptionDescription: Concentric is the first national industrial power services organization delivering forklift and critical power and maintenance solutions that ensure uninterrupted, sustainable facility power. The company’s signature solutions, GuaranteedPOWER® and PerpetualPOWER® are industry firsts, improving reliability, sustainability, and safety to solve the power problem for facility leaders. Concentric helps data centers, distributors, manufacturers, utilities, communications infrastructure and more develop resilience in their power systems while making the energy transition with less risk. With a national network of service professionals, Concentric provides engineering, installation and maintenance/management for power equipment including backup batteries, UPSs, generators, energy storage, micro grids, forklift power, onsite maintenance and more. Job Summary The Technician, Level 3, HVAC Mechanic is responsible for delivering and installing HVAC telecommunications equipment. The Technician, Level 3, HVAC Mechanical Senior will load, deliver, and install equipment to a variety of customer sites for emergencies or scheduled events. They will provide professional, respectful service while performing work and/or solving on-site challenges. This position reports to the Regional Service Manager, Critical Power Operations, and has no direct reports. *The travel expectation for this position could extend up to 2 weeks at a project site, then returning home for a period of 1week before travelling again - Company vehicle will be provided for assigned territories. Key Job Responsibilities • Reliable attendance and punctuality., • Deliver and install telecommunications HVAC equipment., • Ensure all work is performed according to safety regulations and building codes., • Review mechanical and technical manuals and project specifications to understand project requirements., • Develop detailed work plans and timelines., • Estimate material needs and procure necessary equipment., • Conduct pre- and post- inspections to verify quality and compliance., • Conduct regular quality checks throughout the project., • Troubleshoot mechanical problems and identify solutions., • Maintain detailed project documentation including progress reports, work orders and inspection reports., • Coordinate problem resolution with Technical Support, Customer Service, Sales, and other personnel to expedite repairs., • Track activity and progress by communicating job notes and updates with your team., • Prepare necessary reports for project management and clients., • Travel to other branches or sites, as required, to assist with product installation, removal, or repairs., • Implement quality control measures to ensure project standards are met., • Proactively identify and address potential quality issues., • Conduct regular quality checks throughout the project., • Other duties as assigned by supervisor. Key Performance Measurements • A score card that reflects performance in areas such as safety, efficiency, work order completion, customer satisfaction, and issue resolution., • Exercise high degree of time management skill, resulting in greater than 90% time billable to customers., • Management observation regarding attitude, diligence, team contributions, and willingness and ability to learn new skills and information., • Other key performance indicators as assigned.Requirements:, • High school diploma or GED equivalent, required., • Must have 5-7 years of HVAC mechanic experience; preferred commercial and/or industrial., • Should also have experience operating heavy equipment, as well as towing a trailer using a service truck., • Certification from a technical school focused on Journeyman HVAC/Mechanical, preferred., • Must have a valid driver’s license, pass a background check, and drug screen., • May be required to pass additional requirements under the Department of Transportation (DOT)., • Possess general knowledge of safety regulations and compliance requirements., • Strong desire to deepen expertise in HVAC diagnostics, service, and responsibilities, taking on more complex challenges with each year of employment., • Working knowledge of HVAC machines and tools, including the designs, uses, repair, and maintenance., • Familiarity with the use of test equipment e.g., Digital Variable Multi (DVM), and refrigeration test equipment., • Strong organizational and multitasking abilities., • Ability to organize their own work and work independently, with limited supervision., • Proficiency in Microsoft Office and Microsoft TEAMS platforms., • Ability to work with individuals from diverse backgrounds and with diverse needs, and across remote offices., • Ability to clearly articulate ideas (both written and verbal) to both internal and external customers and to listen effectively to customer needs., • Ability to develop and maintain strong workplace relationships., • Possess a keen eye for detail, and the ability to work in a fast-paced environment., • Ability to work collaboratively with other departments., • Willingness to work flexible hours, including weekends and holidays., • Requires heavy travel, some evening, weekends and overnight travel. *This job description is subject to change at any time. Benefits At Concentric we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading benefits: • Competitive pay – Plus incentive opportunities and overtime potential for our hourly employees!, • Three medical plan options with employer premium contribution that start on day one., • Employee paid dental and vision insurance that starts on day one., • Health Savings Account (HSA) with company contribution on eligible High-Deductible Health Plans (HDHP)., • Medical and dependent care Flexible Spending Accounts (FSA) available., • Company-paid life and AD&D insurance, short-term and long-term disability coverage that start on day one., • Company 401K plan with 100% match on the first 4% of employee contributions., • 8 paid holidays., • Full-time Employees receive a total of 128 Hours of Paid Time Off (PTO) Annually., • We offer employee paid accident, critical illness, and hospital indemnity insurance., • We offer employee paid legal plans, identity protection, pet insurance, and home & auto discounts., • Training and mentoring – Learn from our experts in the industry. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit or stand up to 8 hours; use hands to type, maneuver, handle, or feel; and talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. While performing the duties of this job, the employee may be required to wear approved Personal Protective Equipment (PPE) and must maintain a high level of self-awareness about their surroundings due to conditions existing in the work environment. Specific vision abilities required by this job include close vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work is performed primarily in a customer facility location, including indoors and outdoors. The noise level in the work environment is moderate to heavy requiring hearing protection when visiting customer locations. The Concentric Company is an equal opportunity employer and does not discriminate based on race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), gender identity or expression, parental status, national origin, age, disability, genetic information (including family medical history), veteran or military service, or any other legally protected status. #LI-hybrid #LI-ED1 #LI-Elsa

Job DescriptionDescriptionThe Order Puller pulls products from the warehouse and packages the items appropriately to be distributed to customers. Key Responsibilities • Reads work order to determine items to be moved, gathered, or distributed., • Conveys materials and items from receiving or production areas to storage or to other designated areas., • Sorts and places products or items on racks, shelves, or in bins according to predetermined sequence., • Sorts and stores perishable goods in refrigerated rooms., • Fills requisitions, work orders, or requests for items and distributes items to production workers., • Assembles customer orders from stock and places orders on pallets or shelves or conveys orders to packing station or shipping department., • May load product onto delivery trucks., • Marks materials with identifying information., • Opens bales, crates, and other containers., • Records amounts of materials or items received or distributed., • Uses computer/scanner to enter records., • Compiles worksheets or tickets from customer specifications., • Completes requisition forms to order supplies from other plant departments., • Prepares products for shipping by wrapping freight line shipments and packing small packages for processing., • Places items on dry ice or polar packs if necessary., • Assists in maintaining inventory records., • In keeping with our value of Customer Satisfaction, this position is expected to provide high-quality customer service to our internal and external customers, vendors, and others alike., • Adheres to company Policy and Procedures., • Performs duties as workload necessitates., • Maintains a positive and respectful attitude., • Communicates regularly with supervisor and about department issues., • Demonstrates flexible and efficient time management and ability to prioritize., • Consistently reports to work on time, prepared to perform duties of position., • Meets department productivity standards., • May perform other duties as required.Scope of Responsibility • This job follows standard practices and procedures and is expected to accomplish work assignments with a limited amount of supervision. Knowledge and Skill Requirements • Language Ability: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers and other employees of the organization. Ability to read and understand English., • Math Ability: Ability to calculate figures and amounts such as discounts, proportions, and percentages. Ability to apply concepts of basic algebra., • Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • Computer Skills: Able to use basic computer programs and scanners. Education and Experience • High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. Physical Demands • The employee must frequently lift and/or move up to 100 pounds and occasionally lift and/or move up to 50 pounds. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to walk; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. Tools, Equipment, and Machinery • Must have ability to operate pallet jack, forklift or similar machinery, tools, and equipment, as needed, in order to perform the essential functions of the job. Work Environment • Work is performed in a shipping environment and disruptions occur frequently., • The noise level in the work environment is usually moderate to loud. Travel Required • N/A To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job duties. Skills Knowledge and Expertise • Warehouse/Distribution Center, • RF Scanners, • Order Pulling, • Raymond Cherry Picker, • Affordable healthcare (medical/dental/vision), • Opportunity to participate in the Health Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA), • Short Term Disability Insurance paid by the company, • Basic life Insurance equals to your annual salary paid by the company, • Employee Assistance Program – paid by the company, • Long Term Disability Insurance, • The opportunity to purchase additional voluntary insurance coverage for:, • Life Insurance, • Accident, • Whole Life, • Prepaid Legal, • PTO (Paid Time Off), • 9 Paid Holidays per year, • 401-k Plan (eligible after 6 months of employment)

Job Description Gulfeagle Supply is a family-owned business with over 100+ locations nationwide. We are a full line distributor of residential and commercial roofing and building products. Gulfeagle Supply specializes in servicing the professional contractor while also providing a variety of products and services to the homeowner, building owner, architect and general contractor. We take pride in delivering the highest quality and best value to our customers and we would be pleased to make you part of the mission. Here at Gulfeagle we are "Building a Career for YOU" Driver If you are a driver looking to establish a career with one of the top Building Supply Distributors Nationwide, then Gulfeagle has the job for you. Our drivers are responsible for safely driving the most efficient route to the job site, while observing and obeying all traffic laws and safety regulations as well as company policies/procedures. They assist in loading and/or securing materials on trucks daily and help unload materials by using crane, conveyor, piggybacks and/or by hand. Gulfeagle drivers are the face of our Company on the jobsite as they lead, instruct, and supervise others. We take pride in delivering the highest quality and best value to our customers and would be pleased to make you a part of that mission. Here at Gulfeagle we are "Building a Career for YOU" Requirements: • Valid state CDL Class A or B Driver’s License with clear MVR and DOT record, • Must be 21 years old or older, • Must have current and valid Medical Certification Card, • Must have held CDL driving position the previous year with consecutive driving experience, • Must have high degree of attention and considerable dexterity in the control of the vehicle, • Strong communication skills (verbal and written), • Must be able to work both indoors and outdoors under adverse weather conditions., • Ability to bend, reach, lift, and climb, • Ability and willingness to climb on a rooftop and ensure proper stacking (location based), • Must have the ability to repeatedly lift up to 100 pounds of material for extended periods of time, • Must be able to climb a 40’ ladder (location based), • Perform daily vehicle inspections and maintain the cleanliness of vehicles, • Must be a U.S. citizen or be authorized to work in the U.S Must be able to pass a company required drug screening; all employees are subject to random drug testing per company policy Preferred: • Previous material handling a plus, • Previous forklift experience, • Certified to operate a crane is a plus Other Details: • Pay based on experience Competitive Benefits Package: • 401(k) Retirement Plan including Employer Match, • PTO & Paid Holidays, • Health Insurance - Medical, Dental & Vision, • Life, AD&D, Short & Long-Term Disability, • Health & Wellness Programs, • Flexible Spending Accounts, • Health Savings Accounts, • Employee Discount Programs, • Driver Sign-On Bonuses This Job Summary indicates the general nature and level of work expected of the incumbent(s). It is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the incumbent. Incumbent(s) may be asked to perform other duties as requested. Gulfeagle Supply is an Equal Opportunity Employer. We do not discriminate based on age race, gender color, religion, national origin, disability marital status, veteran status, sexual orientation, gender identity, or other characteristics protected under federal, state, or local law. All duties and responsibilities are essential job functions and requirements and are subjected to possible modifications to reasonably accommodate individuals with disabilities. We are proud to be an EEO employer M/F/D/V. We maintain a drug-free workplace Company DescriptionGulfeagle Supply is a family owned distributor of residential/commercial roofing & building products with over 75 locations nationwide. Are you looking for a career opportunity with a growing company? Look no further!Gulfeagle Supply is a family owned distributor of residential/commercial roofing & building products with over 75 locations nationwide. Are you looking for a career opportunity with a growing company? Look no further!

Job DescriptionDescription: Concentric is the first national industrial power services organization delivering forklift and critical power and maintenance solutions that ensure uninterrupted, sustainable facility power. The company’s signature solutions, GuaranteedPOWER® and PerpetualPOWER® are industry firsts, improving reliability, sustainability, and safety to solve the power problem for facility leaders. Concentric helps data centers, distributors, manufacturers, utilities, communications infrastructure and more develop resilience in their power systems while making the energy transition with less risk. With a national network of service professionals, Concentric provides engineering, installation and maintenance/management for power equipment including backup batteries, UPSs, generators, energy storage, micro grids, forklift power, onsite maintenance and more. Job Summary The Technician, Level 2, HVAC Mechanic is responsible for delivering and installing HVAC telecommunication equipment. The Technician, Level 2, HVAC Mechanical will load, deliver, and install equipment to a variety of customer sites for emergencies or scheduled events. They will provide professional, respectful service while performing work and/or solving on-site challenges. This position reports to the Regional Service Manager, Critical Power Operations, and has no direct reports. *The travel expectation for this position could extend up to 2 weeks at a project site, then returning home for a period of 1 week before travelling again - Company vehicle will be provided for assigned territories. Key Job Responsibilities • Reliable attendance and punctuality., • Deliver and install telecommunications HVAC equipment., • Ensure all work is performed according to safety regulations and building codes., • Review mechanical and technical manuals and project specifications to understand project requirements., • Troubleshoot mechanical problems and identify solutions., • Maintain detailed project documentation including progress reports, work orders and inspection reports., • Coordinate problem resolution with Technical Support, Customer Service, Sales, and other personnel to expedite repairs., • Track activity and progress by communicating job notes and updates with your team., • Prepare necessary reports for project management and clients., • Travel to other branches or sites, as required, to assist with product installation, removal, or repairs., • Implement quality control measures to ensure project standards are met., • Proactively identify and address potential quality issues., • Conduct regular quality checks throughout the project., • Other duties as assigned by supervisor. Key Performance Measurements • A score card that reflects performance in areas such as safety, efficiency, work order completion, customer satisfaction, and issue resolution., • Exercise high degree of time management skill, resulting in greater than 90% time billable to customers., • Management observation regarding attitude, diligence, team contributions, and willingness and ability to learn new skills and information., • Other key performance indicators as assigned.Requirements:, • High school diploma or GED equivalent, required., • Should have 3+ years of HVAC mechanic experience; preferred commercial and/or industrial., • Should also have experience operating heavy equipment, as well as towing a trailer using a service truck., • Certification from a technical school focused on Journeyman HVAC/Mechanical, preferred., • Must have a valid driver’s license, pass a background check, and drug screen., • May be required to pass additional requirements under the Department of Transportation (DOT)., • Possess general knowledge of safety regulations and compliance requirements., • Strong desire to deepen expertise in HVAC diagnostics, service, and responsibilities, taking on more complex challenges with each year of employment., • Working knowledge of HVAC machines and tools, including the designs, uses, repair, and maintenance., • Use of test equipment e.g., Digital Variable Multi (DVM), and refrigeration test equipment., • Strong organizational and multitasking abilities., • Ability to organize their own work and work independently, with limited supervision., • Proficiency in Microsoft Office and Microsoft TEAMS platforms., • Ability to work with individuals from diverse backgrounds and with diverse needs, and across remote offices., • Ability to clearly articulate ideas (both written and verbal) to both internal and external customers and to listen effectively to customer needs., • Ability to develop and maintain strong workplace relationships., • Possess a keen eye for detail, and the ability to work in a fast-paced environment., • Ability to work collaboratively with other departments., • Willingness to work flexible hours, including weekends and holidays., • Requires heavy travel, some evening, weekends and overnight travel. *This job description is subject to change at any time. Benefits: At Concentric we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading benefits: • Competitive pay – Plus incentive opportunities and overtime potential for our hourly employees!, • Three medical plan options with employer premium contribution that start on day one., • Employee paid dental and vision insurance that starts on day one., • Health Savings Account (HSA) with company contribution on eligible High-Deductible Health Plans (HDHP)., • Medical and dependent care Flexible Spending Accounts (FSA) available., • Company-paid life and AD&D insurance, short-term and long-term disability coverage that start on day one., • Company 401K plan with 100% match on the first 4% of employee contributions., • 8 paid holidays., • Full-time Employees receive a total of 128 Hours of Paid Time Off (PTO) Annually., • We offer employee paid accident, critical illness, and hospital indemnity insurance., • We offer employee paid legal plans, identity protection, pet insurance, and home & auto discounts., • Training and mentoring – Learn from our experts in the industry. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit or stand up to 8 hours; use hands to type, maneuver, handle, or feel; and talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. While performing the duties of this job, the employee may be required to wear approved Personal Protective Equipment (PPE) and must maintain a high level of self-awareness about their surroundings due to conditions existing in the work environment. Specific vision abilities required by this job include close vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work is performed primarily in a customer facility location, including indoors and outdoors. The noise level in the work environment is moderate to heavy requiring hearing protection when visiting customer locations. The Concentric Company is an equal opportunity employer and does not discriminate based on race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), gender identity or expression, parental status, national origin, age, disability, genetic information (including family medical history), veteran or military service, or any other legally protected status. #LI-hybrid #LI-ED1 #ZTECH

Job DescriptionA day in this role You start your shift by checking your equipment, syncing your RF hand-held scanner, and reviewing the pick list. Throughout the day you move between high‑reach/cherry picker work and ground-level tasks—picking customer orders precisely from designated locations, staging pallets, and keeping dock activity flowing. You wrap up by transporting completed orders to the correct area and communicating updates to your supervisor. Schedule and pay: Monday–Friday; $17–$19 per hour, depending on experience. What you’ll do • Operate multiple types of forklifts (including cherry picker/high‑reach) and other warehouse equipment safely and efficiently., • Pick customer orders accurately by hand and with forklifts from specified locations, on time., • Handle shipping, receiving, and hands‑on GL dock work; load and unload trucks correctly and carefully., • Use an RF hand‑held scanner, totes, rolling carts, pallets, and pallet jacks to process orders., • Read instructions, count accurately, and maintain inventory control with strong attention to detail., • Transport completed orders to designated staging areas within the warehouse., • Communicate effectively with your supervisor and support a clean, safe, team‑oriented environment. What you’ll bring, • High school diploma or GED., • At least 2 years operating a range of forklifts., • 2+ years of high‑volume order picking experience in a fast‑paced setting., • Basic math skills; ability to read and count with precision., • Above‑average attention to detail and solid analytical skills., • Team mindset and ability to thrive in a fast‑moving warehouse., • Ability to repeatedly lift 50+ lbs and stand/walk for the entire shift., • Current or prior forklift license/certification. Tools you’ll use, • RF hand‑held scanner, • Totes and rolling carts, • Pallets and pallet jacks, • Loading and Unloading Vehicles, • Forklift Licensed

Job Description FORKLIFT OPERATOR (Charlotte, NC 28273) Forklift Operator – Hours • Saturday - Wednesday, 6:00am – 4:00pm (must be flexible), Summer months until job is finished. Forklift Operator – Job Description Operate a reach truck safely and efficiently in a warehouse environment, pick and stage customer orders, replenish shelves and maintain proper inventory placement using the reach truck. Forklift Operator - Requirements: • Minimum 1 year of recent reach truck operation experience (required), • Strong attention to detail and commitment to accuracy, • Ability to work in a warehouse environment for extended periods, • Excellent communication skills and a team-oriented mindset, • Physical ability to stand, lift, bend, and move materials as needed, • Use a scanner gun Forklift Operator – Pay Rate • $18+ Weekly Pay!

Job DescriptionSalary: $18-$19 based on experience Forklift Operator Location: Charlotte, NC Job Type: Full-Time Compensation: $18.00 - $19.00 per hour (Based on experience and knowledge) Role Overview: As a Forklift Operator, you will be responsible for the timely and accurate movement, storage, and organization of a wide range of packaging products, including handheld containers, bulk bins, custom dunnage, pallets, and top caps. Your attention to operational efficiency will help ensure production targets and shipping schedules are consistently met. You will be expected to uphold the highest standards of product quality, carefully handling all materials to prevent damage and performing visual inspections to verify the condition of outgoing and stored goods. A key aspect of your role will be maintaining a safe work environment by rigorously following company policies, OSHA guidelines, and best practices for powered industrial truck operation. You will conduct daily equipment inspections, promptly report issues, and participate in ongoing safety training. Efficient communication and teamwork are essential, as you will coordinate closely with the warehouse, production, and shipping departments to support seamless workflow and resolve potential bottlenecks. We are looking for candidates who are proactive, detail-oriented, and committed to continuous improvementnot only in their own performance but in the efficiency and safety of the entire warehouse operation. Core Responsibilities: Your primary duty is to ensure the safe and efficient movement of materials within our facility. Responsibilities include: Material Handling & Equipment Operation: • Safely operate sit-down forklifts and other powered industrial trucks to move large pallets of reusable packaging, bulk containers, and raw materials., • Load and unload trucks with precision, ensuring that custom packaging solutions and dunnage are not damaged during transit., • Stack and store products in designated high-bay areas, adhering to strict organization and stability guidelines. Order Fulfillment & Quality Control: • Pull orders accurately for shipment to major OEM and Tier-1 automotive suppliers, verifying product types and quantities against shipping manifests., • Inspect reusable packaging products (totes, pallets, top caps) for defects or damage before shipment to ensure quality standards are met., • Utilize RF scanners to track inventory movement, ensuring real-time accuracy in our Warehouse Management System. Safety & Stewardship: • Adhere to all safety protocols and OSHA regulations, particularly for handling heavy, durable plastic goods., • Participate in maintaining a clean, hazard-free workspace, including removing debris and organizing empty pallets., • Perform daily pre-shift inspections of forklift equipment and report any maintenance needs immediately. Performance Expectations: • Maintain Safety: Operate with zero safety incidents or product damage., • Drive Efficiency: Meet daily loading and unloading targets to maintain production and shipping schedules., • Ensure Accuracy: Achieve high accuracy rates in order picking to prevent shipping errors., • Collaborate: Communicate effectively with supervisors and team members to resolve workflow bottlenecks. Qualifications & Skills: • Experience: Minimum of 2 years of forklift operating experience in a warehouse or manufacturing environment., • Technical Skills: Proficiency with RF scanning tools and experience loading/unloading trailers., • Physical Ability: Ability to sit, stand, and drive a forklift for extended periods. Must be able to lift up to 50 lbs unassisted when necessary., • Attention to Detail: Ability to distinguish between different product specifications (e.g., specific dunnage types or container sizes)., • Language: Ability to read and interpret English safety signs, work instructions, and shipping documents. Preferred: • Experience handling plastic products, pallets, or bulk bins., • Familiarity with automotive supply chain standards., • High school diploma or GED. Benefits: • Health & Wellness: Comprehensive Medical, Dental, and Vision insurance., • Retirement: 401(k) plan with company matching to help you save for the future., • Time Off: Paid Time Off (PTO) and paid holidays., • Security: Life insurance and disability coverage. Equal Employment Opportunity Statement: We are committed to fostering a diverse, inclusive, and equitable workplace that reflects the vibrant communities we serve. In alignment with federal and state laws, we proudly maintain a policy of equal employment opportunity for all individuals. Our commitment extends to all aspects of employment, including recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, or genetic information. Join us and lead our team to new heights in the hospitality staffing industry. If you're ready to innovate and drive success, we want to hear from you!

Job Description Capital Electric has a 2nd Shift Warehouse Assoc (MHE) position available at our Charlotte, NC location. This particular warehouse associate for Capital Electric is responsible for PICKING & PACKING our customer orders for pick-up, unloading and loading of transfer trucks, properly checking in material, and keeping the warehouse stocked in an orderly fashion to help the branch maintain being the electrical distributor of choice in their area. Responsibilities: • Pulling stock and organizing customer orders, • Unloading and loading of CLS transfer trucks with or without forklift, • Checking, recording, and putting up stock/material, • Preparing cross dock deliveries, • Will call, • Keep warehouse organized and clean, • Help other associates when needed, • Follow verbal and written instructions with minimal supervision, • Be on time and work diligently with co-workers or alone, • Multi-task and continually prioritize tasks to be completed throughout the day, • Other duties as required Requirements: • Good attendance and tardiness history, • Ability to perform accurate work and pay close attention to details, • Positive attitude and team player, • Must be flexible and able to multi-task on a regular basis, • At 1 - 2 years experience on a forklift (you will be tested on your experience during in person interview).Company DescriptionCapital Electric offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building – you can find it here. We operate in Maryland, Virginia, Pennsylvania, West Virginia, North Carolina, South Carolina and Georgia, and are part of the Sonepar group, the world’s #1 electrical distributor with over 46,000 associates around the globe.Capital Electric offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building – you can find it here. We operate in Maryland, Virginia, Pennsylvania, West Virginia, North Carolina, South Carolina and Georgia, and are part of the Sonepar group, the world’s #1 electrical distributor with over 46,000 associates around the globe.

Job Description Hiring for a full-time forklift position in SW Charlotte Area Schedule: M-F 8:30 AM – Finish • Last ticket is printed at 530pm, shift ends when all tickets are completed (OT is common) Pay Scale: $18/hr Job Function: Perform warehouse work related to receipt, shipment, storage, distribution, or delivery of products, parts, and materials. Load, unload, move, or store items according to delivery or routing documents, or supervisor instructions. Operate a forklift (reach, sit or stand-up) to complete orders Pulling orders on paper and placing them onto pallets to be wrapped Ensure that these orders are picked, packed, and shipped correctly and on time. Cycle count and maintain all products and inventory locations. Load and unload trucks. Experience: Prior experience in a warehouse environment. Forklift Experience preferred Application Steps: Apply online at or call 704.295.4592 for immediate consideration LONG-TERM TEMP TO PERM!!! Company DescriptionParamount is committed to helping employers and candidates connect for suitable positions that are aligned with company and employee career goals alike.Paramount is committed to helping employers and candidates connect for suitable positions that are aligned with company and employee career goals alike.

Job Description We are currently seeking two reliable, hardworking warehouse associates to join our team. In this position, you will perform various warehouse activities as well as receive, input, sort, load, and unload products. You will organize stock, maintain inventory, and process, pack, and ship orders. Keen attention to detail is a must, as you will be inspecting products for defects and reporting damages as needed. Warehouse Associate Duties and Responsibilities • Process, pack, and ship orders accurately, • Maintain inventory of products; restock as needed, • Inspect products for damages; report as needed, • Maintain a clean and orderly warehouse environment, • Receive and appropriately sort and store incoming products, • Prepare products for shipping, • A high school diploma preferred, • Valid Drivers License, • Proven work experience in a warehouse setting, • Familiarity with the use of hand trucks, pallet jacks, and other, • necessary warehouse equipment, • Ability to skillfully and safely operate a forklift, • Good working knowledge of warehouse data systems, • Solid communication skills and inventory skills, • Physical stamina and dexterity necessary for the work; ability to lift or move at least 40 lbs Company DescriptionAt Lee Transport Equipment, we are continuously improving our performance on your behalf, while searching for the newest and most innovative products and materials to help make you one step ahead of your competition. We provide the highest quality in custom design and fabrication only from the best manufacturers – but the true value is in our relationship. When you become a client of Lee Transport Equipment, we partner with you to assist in determining your needs, provide design options to meet those needs in a cost-effective manner, and continuously strive to increase efficiency and safety in the field. HISTORY Lee Transport Equipment, Inc. is a family owned and operated business that has been a leader in the commercial truck and van equipment industry since 1965. Specializing in commercial upfits such as service bodies, platform and dump bodies as well as van interiors. Headquartered in Columbia SC with a branch location in Charlotte NC, effectively serving markets that range from individual contractors, dealers, fleets and leasing companies, to State and Federal government entities, in an area that encompasses all of South Carolina and the majority of North Carolina and Georgia. Through ever-changing business climates, Lee Transport Equipment, Inc. has always held true to our values of: Trust Dedication Character Discipline Integrity Humility Passion These values provide the building blocks for a customer-centric culture of service that supports our ultimate goal: to do the right thing – in every situation, for every customer, and every team member.At Lee Transport Equipment, we are continuously improving our performance on your behalf, while searching for the newest and most innovative products and materials to help make you one step ahead of your competition. We provide the highest quality in custom design and fabrication only from the best manufacturers – but the true value is in our relationship. When you become a client of Lee Transport Equipment, we partner with you to assist in determining your needs, provide design options to meet those needs in a cost-effective manner, and continuously strive to increase efficiency and safety in the field.\r\n\r\nHISTORY\r\nLee Transport Equipment, Inc. is a family owned and operated business that has been a leader in the commercial truck and van equipment industry since 1965. Specializing in commercial upfits such as service bodies, platform and dump bodies as well as van interiors. Headquartered in Columbia SC with a branch location in Charlotte NC, effectively serving markets that range from individual contractors, dealers, fleets and leasing companies, to State and Federal government entities, in an area that encompasses all of South Carolina and the majority of North Carolina and Georgia.\r\n\r\nThrough ever-changing business climates, Lee Transport Equipment, Inc. has always held true to our values of:\r\n\r\nTrust\r\nDedication\r\nCharacter\r\nDiscipline\r\nIntegrity\r\nHumility\r\nPassion\r\nThese values provide the building blocks for a customer-centric culture of service that supports our ultimate goal: to do the right thing – in every situation, for every customer, and every team member.

Job Description Join Capital Electric Supply, the region's premier electrical distributor, and take the lead in our dynamic operations! As a Lead Inventory Associate, you'll be the vital force ensuring seamless product flow and unparalleled customer service. This is more than a job; it's an opportunity to apply your expertise and leadership skills to maintain optimal stock levels, drive efficiency, and help "Power Progress for Future Generations" as part of the global Sonepar family. The Role This Lead Inventory Associate is responsible for keeping track of inventory changes; restock items and maintain inventory levels and accurate records, directly contributing to efficient operations and supply chain integrity. Responsibilities • Master of Returns: Transform customer returns into positive experiences! You’ll manage the flow of all incoming products, ensuring credits are issued at lightning speed (within 48 hours) and keeping the process smooth and hassle-free., • Discrepancy Detective: Team up with our sales crew to investigate and resolve any inventory mysteries! Your keen eye for detail will ensure every item is accounted for and every record is spotless., • Logistics Liaison: Play air traffic controller for return shipments! You'll schedule vendor pickups and keep our outbound logistics running like a well-oiled machine., • Inventory Auditor: Lead the charge on our inventory audits! You'll oversee and execute cycle counts, ensuring our stock accuracy is second to none and guaranteeing a seamless operation for the entire team. · High school diploma or equivalent · 2 years warehouse experience · Skilled with computer and inventory systems · Knowledge of all warehouse processes and equipment · Strong organizational skills and attention to detail · Ability to lift 50+ pounds manually or 100+ with two people or Forklift equipment · Have at least 3+ years experience with at least 2 of the following forklifts: Stand up, reach truck, order picker and sit-down propane forklift Company DescriptionCapital Electric offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building – you can find it here. We operate in Maryland, Virginia, Pennsylvania, West Virginia, North Carolina, South Carolina and Georgia, and are part of the Sonepar group, the world’s #1 electrical distributor with over 46,000 associates around the globe.Capital Electric offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building – you can find it here. We operate in Maryland, Virginia, Pennsylvania, West Virginia, North Carolina, South Carolina and Georgia, and are part of the Sonepar group, the world’s #1 electrical distributor with over 46,000 associates around the globe.

Job Description Join Capital Electric Supply, the region's premier electrical distributor, and take the lead in our dynamic operations! As a Lead Receiving Associate, you'll be the vital force ensuring seamless product flow and unparalleled customer service. In this pivotal leadership role, you'll be the primary person of all incoming and outgoing logistics, coordinating your team to ensure peak efficiency. Your mission: keep the warehouse running like a well-oiled machine and help us maintain our status as the undisputed "electrical distributor of choice" in the area! Responsibilities • End-to-End Logistics: Manage the complete journey of our products from arrival to shipment using Solar Eclipse software., • Shipment Supremo: Oversee all incoming/outgoing logistics, upholding company standards for speed and accuracy., • Team Lead & Coach: Guide warehouse associates through daily tasks like packaging, staging, loading, and general material movement., • Quality Control Captain: Ensure every product leaving the warehouse meets our high bar for quality., • Safety First Advocate: Maintain a clean, safe workplace operating within all SOPs and OSHA standards. · High school diploma or equivalent · 2 years warehouse experience · Skilled with computer and inventory systems · Knowledge of all warehouse processes and equipment · Strong organizational skills and attention to detail · Ability to lift 50+ pounds manually or 100+ with two people or Forklift equipment · Have at least 3+ years experience with at least 2 of the following forklifts: Stand up, reach truck, order picker and sit-down propane forklift Company DescriptionCapital Electric offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building – you can find it here. We operate in Maryland, Virginia, Pennsylvania, West Virginia, North Carolina, South Carolina and Georgia, and are part of the Sonepar group, the world’s #1 electrical distributor with over 46,000 associates around the globe.Capital Electric offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building – you can find it here. We operate in Maryland, Virginia, Pennsylvania, West Virginia, North Carolina, South Carolina and Georgia, and are part of the Sonepar group, the world’s #1 electrical distributor with over 46,000 associates around the globe.

Job Description Objective Looking for a Cool Job in a fast-paced environment with great daytime hours Monday- Friday? The Driver/Warehouse Associate is responsible for the inventory of the Warehouse and daily delivery of HVAC freight and materials. The ultimate goal of this role is to procure, process, dispatch, and deliver/transport products to customers and vendors for one of our established wholesale HVAC distributorships. Duties and Responsibilities • Daily loading and unloading of products., • Assist with delivering and transporting HVAC freight and materials to customers., • Receive, inspect and stock all merchandise., • Verify all items received to items ordered for accuracy., • Pick and verify orders for customers and prepare orders for shipment as needed., • Collect invoices with proper signatures and return to Sales Center Manager., • Responsible for daily checklist of truck and forklift maintenance and reporting in/out times with merchandise returns. • Appropriate use and maintenance of OF device., • Assist with physical inventory and inventory control., • Read customer orders, work orders, shipping orders and/or requisitions to determine items to be moved, gathered, distributed, or shipped. • Provide excellent customer service to external customers., • Ensure grounds and warehouse are kept neat, orderly, and safe for employees and customer traffic. • Adhere to all safety requirements relevant to one’s regular job duties. Required Qualifications • Minimum 24 months of verifiable experience driving a 26' box truck, or stake bed truck., • Ability to multi-task and work within daily deadlines., • Knowledge of common carrier (LTL) and full truckload logistics., • Ability to communicate effectively with customers and provide superior service., • A willingness to learn and grow with our Company., • Must be 21 years of age or older., • Proven commitment to customer service and a safe work environment., • Strong attention to detail and accuracy., • Pass a pre-employment drug screening and background check Preferred Qualifications • CDL Class B license preferred (except when required in certain states), • 6 months Warehouse experience including forklift operation., • Bilingual (Spanish) preferred., • Knowledge of HVAC and truckload logistics is a plus. For more than 50 years we have been known as a respected, strong, and reliable force within the HVAC industry. Our distribution rights with trusted manufacturer brands such as Rheem, American Standard, Frigidaire, Mitsubishi, and others allow us to provide only the highest quality, most eco-friendly equipment, parts and supplies to our valued network of contractors’ coast to coast. As a member of our sales and service team you will enjoy competitive pay and benefits including medical, dental, vision and life insurance, paid time off, tuition reimbursement and an opportunity to builGemaire is a subsidiary of Watsco, Inc., (NYSE: WSO) the world’s largest independent distributor of heating, ventilation, and air conditioning (HVAC) equipment, parts, and supplies. Gemaire, with corporate headquarters in Deerfield Beach, Florida. Gemaire has more than 100 locations in eleven states including Florida, Georgia, Texas, North Carolina, South Carolina, Virginia, Alabama, Louisiana, California, Nevada, and Arizona. \r\n\r\nFor more than 50 years we have been known as a respected, strong, and reliable force within the HVAC industry. Our distribution rights with trusted manufacturer brands such as Rheem, American Standard, Frigidaire, Mitsubishi, and others allow us to provide only the highest quality, most eco-friendly equipment, parts and supplies to our valued network of contractors’ coast to coast. \r\n\r\nAs a member of our sales and service team you will enjoy competitive pay and benefits including medical, dental, vision and life insurance, paid time off, tuition reimbursement and an opportunity to buil

Job Description The Warehouse Associate helps protect inventory, receives, loads, and unloads materials. He or she must appropriately handle all materials following company policies and procedures to ensure a safe workplace and may need to drive a company vehicle occasionally. The ideal candidate for this position has a high school diploma or GED and at least one year of experience in a warehouse environment. In addition, he or she must have the strength and stamina to perform the duties of this position (standing, walking, lifting, pushing, pulling, etc.) and must have a forklift certification (or is willing to obtain our internal certification). Effective oral and written skills, good time management skills, speech, and behavior are all required for this position. Bilingual (English and Spanish) is a plus but not required to be considered. All Warehouse Associates are required to wear steel toe boots for safety purposes. HOURS: • Loads and unloads flooring materials and supplies ensuring proper handling at all times, • Moves materials within the warehouse as needed, using a forklift as required, • Follows all safety policies and procedures, • May be required to make deliveries or pick up materials and return to warehouse using company vehicle., • Using computer to record inventory status, • Previous experience in a warehouse environment and with floor coverings highly preferred, • Sit-down forklift experience, • Excellent communication skills, computer experience a plus, • Able to bend, kneel, squat, stand, and lift heavy objects as needed, • Must be able to lift objects weighing up to 75 pounds, • Valid Driver's license, clean 3 year driving record, • Bi-weekly payroll via direct deposit, • Eligible to participate in group health, dental & vision insurance plans after 60 days full-time employment, • Supplemental life, accident, cancer and short-term disability insurance available after 60 days full-time employment, • 401(K) with company match after six months employment, • Paid Time Off (PTO) from first day of employmentCompany DescriptionAtlanta Flooring Design Centers is both a Commercial and Residential Flooring Contractor. A respected name in the floor covering industry since 1985, we offer quality products, excellent service, and competitive pricing to the Southeast. We are dedicated to our customers and their concerns. We are an employee-owned company.Atlanta Flooring Design Centers is both a Commercial and Residential Flooring Contractor. A respected name in the floor covering industry since 1985, we offer quality products, excellent service, and competitive pricing to the Southeast. We are dedicated to our customers and their concerns. We are an employee-owned company.

Job Description Position overview: The position is responsible for: • Sample Inventory cycle counts., • Maintaining inventory accurately and according to company policies., • Recognizing quality issues., • Escalating safety, quality and any other issues that may arise during the operation., • Meet or exceed any productivity standards., • Participate in all provided training., • Attending weekly team meetings Key Responsibilities: • Maintains a safe and clean work environment., • Safely operates any equipment, including, but not limited to, forklifts, man-up Order Picker, voice or RF picking equipment. Able to operate at heights of ~25’ high., • Rotate sample inventory stock via ABC item category process, • Receive and put away inbound deliveries, • Rotating Overstock inventory, • Prep speed zone new launch collection inventory, • Update and monitoring SKU location labels, • Manage returns and recycling process, • Remove Obsolete Samples from Inventory, • Close completed sewing orders, • Partners with the internal teams, as needed, to meet and exceed customer service expectations., • Provides timely feedback to the company regarding service failures or customer concerns., • Maintains or exceeds the standards that have been set for the team, demonstrates commitment and is accountable for results. Professional experience: • Prior experience inventory control., • Prior experience in textiles and wallcoverings preferred., • Familiar with inventory and warehouse management concepts and systems. Experience with RF picking, voice picking, or pick/put to light is preferred., • Strong math skills (addition/subtraction/dividing/fractions)., • Able to distinguish colors and patterns (not color blind)., • Able to lift up to 30 lbs., • Able to push and pull rolling carts and pallet jacks., • Able to stand/walk up to 8 hours per day., • Excellent computer skills, preferably in an AS400 or Infor environment., • Must be able to use MS Office especially Excel and Word., • OSHA Forklift Certified (Sit down forklift, man-up Order Picker). Able to operate and work at heights of ~25’ high., • Outstanding follow-up skills. Personal traits: • Must be able to work flexibly within the distribution center’s hours, currently between 7am and 6pm eastern., • Team player with can-do attitude who loves interacting with people., • Excellent verbal and written communicator., • Effective use and management of time to accomplish goals and tasks., • Detail oriented. Ability to pay attention to the minute details of a project or task but can move very quickly., • Ability to maintain a calm and professional demeanor under pressure, in a fast-paced environment., • Proven ability to build an excellent rapport with fellow employees and customers., • Dependable, good work ethic, excellent attitude and inclination to exceed daily goals., • Acts with a sense of urgency, multitasks and can remains focused in a very busy environment., • A sense of urgency while researching thoroughly and providing regular pro-active updates so customers are well informed and updated regarding all open issues, and pending orders., • Customer/Client Focus - Passionate about helping customers., • Problem solving/analysis., • Self-motivated self-starter.

Job Description Capital Electric has a Lead Transfer / Return Associate position available at our Charlotte, NC location. A Lead Warehouse Associate for Capital Electric is responsible for overseeing incoming and outgoing shipment activity, assisting warehouse associates in daily activities, and keeping the warehouse stocked in an orderly fashion to help the branch maintain being the electrical distributor of choice in their area. Responsibilities • Receiving the Return: The item arrives back at the warehouse's returns dock or designated area, • Inspection and Processing: Inspect the item to determine its condition (e.g., damaged, sellable, needs repair). This requires tracking the item's journey and determine necessary actions, such as refunding the customer or restocking the inventory., • Transfer to Storage or Dumpster: The item is then moved from the processing area to its appropriate location., • Learn our Solar Eclipse software, • Oversee incoming and outgoing shipment activity to company standards, • Ensure warehouse cleanliness to company standards, • Communicate with warehouse leadership, • Oversee (and assist) WH Associate:, • Verifying and packaging products for shipping (shrink wrapping, boxing, labeling), • Staging product for loading, • Loading product onto truck, • Unloading materials from truck, • Moving materials to warehouse for storage, • Moving waste to dumpsters, • Responsible for quality control, • Operate within standard operating procedures (SOPs) and OSHA safety standards, • Operate Powered Industrial Trucks (PIT). Stand up, reach truck, order picker and sit-down propane forklift, • Other duties assigned REQUIRMENTS • 3+ years warehouse experience – electrical distribution industry preferred, • Ability to perform accurate work and pay close attention to details, • Ability to lift up to 50 pounds on regular basis; 70 lbs occasionally, • Proficient use of a forklift will be required., • Must be flexible and able to multi-task on a regular basis, • Basic reading, writing, and arithmetic skills required, • Good communication skills., • Strong organizational skills., • Time management skills. Company DescriptionCapital Electric offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building – you can find it here. We operate in Maryland, Virginia, Pennsylvania, West Virginia, North Carolina, South Carolina and Georgia, and are part of the Sonepar group, the world’s #1 electrical distributor with over 46,000 associates around the globe.Capital Electric offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building – you can find it here. We operate in Maryland, Virginia, Pennsylvania, West Virginia, North Carolina, South Carolina and Georgia, and are part of the Sonepar group, the world’s #1 electrical distributor with over 46,000 associates around the globe.

Job Description Location: Charlotte, North Carolina Compensation ranging from $16 to $20 gross per hour. About the Company Selfnamed.com is a trailblazing platform empowering individuals and businesses to create, personalize, and grow clean beauty brands. Our comprehensive self-service platform enables you to transform ideas into premium cosmetics lines, offering extensive customization for both personal and branded skincare products. We are excited to launch our new fulfillment center in Charlotte, North Carolina, and we’re looking for passionate and skilled individuals to help shape our North Carolina branch culture from the ground up. Job Description We are seeking a Senior Printing Equipment Operator to join our team as one of the first hires in our Charlotte fulfillment center. In this role, you will be at the forefront of our printing operations, ensuring the highest quality in labels and packaging while utilizing eco-friendly equipment. This is a unique opportunity to lead, innovate, and help establish best practices in a dynamic, collaborative environment. Key Responsibilities Printing Operations: ● Set up, operate, and maintain advanced printing equipment to ensure optimal performance and top-quality output. ● Analyze print orders, determine appropriate settings, and troubleshoot any issues with print files in collaboration with support staff. ● Perform routine maintenance to keep all equipment in peak condition. Inventory and Logistics: ● Accurately manage the receipt and issuance of goods, ensuring all documentation is correctly processed. ● Monitor inventory levels, restock supplies, and place orders to prevent disruptions in operations. ● Participate in regular warehouse inventory audits. ● Assist with unloading, loading, and proper placement of products within the facility. Qualifications We’d love to hear from you if you: ● Have experience operating printing and labeling equipment, with a willingness to learn new technologies. ● Possess certification and skills in operating an electric forklift (preferred but not required). ● Are detail-oriented, committed to quality, and thrive in an efficient work environment. ● Bring a positive attitude, a problem-solving mindset, and a drive for excellence. How to Apply If you’re eager to work with high-quality products at an eco-conscious company and want to play a pivotal role in our new fulfillment center, we invite you to apply. Please submit your resume and cover letter via the "Apply" section. Company DescriptionAbout the Company Selfnamed.com is a trailblazing platform empowering individuals and businesses to create, personalize, and grow clean beauty brands. Our comprehensive self-service platform enables you to transform ideas into premium cosmetics lines, offering extensive customization for both personal and branded skincare products. We are excited to launch our new fulfillment center in Charlotte, North Carolina, and we’re looking for passionate and skilled individuals to help shape our North Carolina branch culture from the ground up.About the Company\r\nSelfnamed.com is a trailblazing platform empowering individuals and businesses to create, personalize, and grow clean beauty brands. Our comprehensive self-service platform enables you to transform ideas into premium cosmetics lines, offering extensive customization for both personal and branded skincare products. We are excited to launch our new fulfillment center in Charlotte, North Carolina, and we’re looking for passionate and skilled individuals to help shape our North Carolina branch culture from the ground up.

Job Description PLC Maintenance Technician (Night Shift) Location: Statesville, NC Job Type: Full-Time Pay Range: $27.85/hour + $1.50/hour night shift premium Position Overview M Force Partners is seeking a PLC Maintenance Technician to support overnight manufacturing operations in a high-volume production environment. This role is responsible for maintaining, troubleshooting, and improving automated production equipment to ensure safety, quality, and optimal cycle time. This opportunity is ideal for a mechanically and electrically skilled technician who is comfortable working independently on night shift and supporting continuous improvement initiatives. Shift Schedule • 7:00 PM – 7:00 AM, • Rotating schedule (2–2–3), • Overtime may be required based on operational needs Key Responsibilities • Troubleshoot, repair, modify, and maintain production machinery and automated equipment, • Perform preventive and predictive maintenance to reduce downtime, • Program, calibrate, and adjust equipment to support quality and cycle-time targets, • Support PLC and robotics programming, with preference for Omron systems, • Document breakdowns, kaizens, and maintenance activities, • Operate forklifts and other industrial equipment as required, • Maintain 5S standards and organized work areas, • Follow operator instructions, safety guidelines, and maintenance procedures, • Communicate effectively with production, engineering, and maintenance teams, • Identify and recommend continuous improvement opportunities, • Support compliance with quality and environmental systems (ISO, IATF, etc.), • Perform additional maintenance duties as assigned Required Qualifications • High School Diploma or GED, • Experience with PLC programming (Omron preferred), • 2-year technical degree or 3–5 years of industrial maintenance experience, • 1–3 years of experience working with AC/DC voltage and industrial electrical systems, • Strong electrical and mechanical troubleshooting skills, • Ability to read and interpret technical documentation and operator instructions, • Ability to work with minimal supervision on night shift Preferred Qualifications • Knowledge of robotics and servo systems, • Forklift operation experience, • Prior experience in an automated manufacturing environment Job presented by M Force Partners M Force Partners is a specialized recruitment partner connecting top-tier talent with leading organizations. With a deep understanding of engineering/technical, medical, professional and executive disciplines and industry demands, we deliver tailored recruitment solutions, including direct hire and contract placements, to ensure the right fit for both candidates and clients. If this role isn’t the right fit for you, we encourage you to explore our other opportunities at mforcepartners.com. Do you know someone who may be a great match? Feel free to share this opportunity within your network Equal Opportunity Employer M Force Partners is an Equal Opportunity Employer. Employment decisions are based on qualifications, merit, and business needs. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Company DescriptionM Force Partners is a specialized recruitment partner connecting top-tier talent with leading organizations. With a deep understanding of engineering/technical, medical, professional and executive disciplines and industry demands, we deliver tailored recruitment solutions, including direct hire and contract placements, to ensure the right fit for both candidates and clients. If this role isn’t the right fit for you, we encourage you to explore our other opportunities at mforcepartners.com. Do you know someone who may be a great match? Feel free to share this opportunity within your networkM Force Partners is a specialized recruitment partner connecting top-tier talent with leading organizations. With a deep understanding of engineering/technical, medical, professional and executive disciplines and industry demands, we deliver tailored recruitment solutions, including direct hire and contract placements, to ensure the right fit for both candidates and clients.\r\n\r\nIf this role isn’t the right fit for you, we encourage you to explore our other opportunities at mforcepartners.com.\r\n\r\nDo you know someone who may be a great match? Feel free to share this opportunity within your network

Job Description Join the team at James River Equipment in Charlotte As a Parts Sales Specialist, your typical responsibilities include: • Greet walk-in customers, respond to customer telephone calls and inquiries, sells products and/or services to meet customer needs., • Process internal (inter-company) parts transfer requests., • Supplies Service Technicians with parts as required., • Assists with preparing and maintaining merchandise displays., • Verifies receipting-in of shipments and assist with placing Machine Down and Stock Orders in their proper inventory locations., • Keep work area and assigned warehouse areas neat, clean, and organized., • Maintains condition of department vehicles, inventory, tools and equipment., • High school diploma or equivalent, • John Deere Parts experience or 3+ years other parts experience, preferably automotive or other comparable equipment, • Safely operate a forklift, must be able to obtain forklift certification, • Strong verbal communication skills, • Basic computer skills, • Regular and timely attendance is required., • Participates in all job-related training and development., • Hazards from electrical, mechanical and power equipment, • Risk of exposure to chemicals such as oils, antifreeze, volatile hydrocarbons, and battery acid, • Extremes of weather, • Mists, fumes and non-continuous noises of varying sound level and intensities

Job Description Quality Control Specialist - Distribution Join the dynamic team at Eastern Industrial Supplies, Inc. in Charlotte, NC, where every day brings new adventures in the world of wholesale industrial distribution! As a Warehouse Associate & Delivery Driver, you will be at the forefront of logistics, ensuring that our valued customers receive their products safely and on time. Experience the thrill of working in a high-performance culture that celebrates excellence and integrity, where your contributions truly make a difference. Your journey here will be filled with learning opportunities, and you will be part of a team that honors God in all actions. So, if you're hungry for growth and eager to be part of something bigger, this is the opportunity you've been waiting for! LOCATION - 2019 North Tyron Street, near downtown Charlotte (free parking) Quality Control Specialist Responsibilities: Ensures inventory accuracy; adjusts inventory in system when necessary; Maximize space and tracks item locations. Pull Count Report daily Perform all Immediate Counts first thing daily, after immediate Counts are completed and resolved, complete daily Advanced Cycle Counts. Investigate and resolve any discrepancies found between the inventory count and the physical counts Partner with Sales, Receiving, Shipping, and any other parties to find out why discrepancies occurred Report to Supervisor any findings regarding adjustments that may be made to procedures to prevent future discrepancies. Additional duties: • Perform all Immediate Counts (Back Order Investigations) first thing daily, investigating and resolving any discrepancies found between the inventory count and the physical counts., • Log Unquality Events (UETs) for Back Orders., • Weekly Future Purchase Order Analysis for Space Management, • Investigate and resolve each item discrepancy as necessary, • Adjust counts in system as required and track dollar value of adjustments, • Maximize location space for items as needed, move items from secondary/overstock locations to primary locations as needed, or as informed by Pickers. Good communication skills are vital for effectively collaborating with team members. A commitment to quality, safety and integrity will guide your actions daily, while a positive attitude and a willingness to learn will make you an invaluable team member. Training for forklift driver certification, safety, ERP system, quality control, and everything else you will need to be successful at Eastern is provided! What we need to get you on our team! Previous warehouse experience Forklift and other power equipment operation experience Some quality control experience is preferred in a high volume distribution center A positive attitude and ability to learn Please apply today! EOE and Drug Free Workplace An offer of employment with Eastern Industrial Supplies is contingent upon the successful conclusion of a drug test and background check. Job Posted by ApplicantPro

Job Info • Job Location: Charlotte, NC, • Route Type: Local, • Type of Assignment: Flex, • Transmission Type: Automatic Job Requirements • Experience: 0+ (includes CDL students), • Handling: No-touch freight Additional Information Forklift Driver | $17 Per Hour | Charlotte, NC TransForce is seeking a Forklift Driver to support local operations based in Charlotte, North Carolina. Forklift Driver Details * Schedule: Monday - Friday, 7AM start, 8 hour shifts, 40+ hours per week. Some Saturdays. * Pay: $17 Per Hour Forklift Driver Minimum Requirements: * Experience: 3+ months • Equipment Experience: Forklift Moves materials in the warehouse and loads / unloads trucks safely, accurately, and promptly * Maintain accurate logs and paperwork * Meet the physical demands of the role, including using a forklift Benefits: * Medical, dental, and vision insurance * Paid time off * 401(k) Join TransForce and see why our drivers are proud to be on the TransForce team. We offer steady pay, benefits, and work with a team that has your back. In addition, you’ll enjoy assignment flexibility that you won’t find anywhere else. TransForce is accepting applications on an ongoing basis. Apply now or call 704-247-9295

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a CDL Driver to join our Mayer team in Charlotte, NC! Summary: The CDL Driver is responsible for delivering products to/from customers, company branch/warehouse locations, and company suppliers. Responsible for ensuring that deliveries are prepared to meet customer requirements in the most efficient manner, and materials are correct and free of damage. What You'll Do: • Inspect company vehicle for visual and operating defects. Responsible for completing a daily inspection report, • Keep company vehicle clean, serviced, and maintained. Alert supervisor of repair and/or service needed, • Must follow Department of Transportation (DOT), local and state driving laws and regulations, • Load or unload vehicle; and ensure all material for each order is correct (quantity and type of material), and that material is free of damage before departure, • May assist in preparing orders for delivery, • Ensure all appropriate documentation is thoroughly completed at the time of delivery, including delivery receipt is signed by the customer, packing list and branch/warehouse manifest, • Pick up material returns from customers. Responsible for inspecting the condition of the material and verifying quantities and catalog numbers, • Pick up material from company suppliers, • May be required to support other Warehouse duties such as preparing and filling orders and/or receiving, stocking, staging, and shipping material Qualifications What You'll Need • 7+ years of driving experience and 1+ years of CDL driving experience preferred, • Or 1+ years of CDL driving experience required, • Must have a valid Commercial Driver’s License (CDL), • Must be at least 21 years of age, • Must pass a pre-employment and annual review of their Motor Vehicle Record, • Must obtain verification of non-expired medical certificate as required by law within 60 days of hire, • Must not have had their driver's license suspended for traffic accidents/violations within the past 3 years, • Ability to handle loads with a combine weight of 26,000 GVW required, • Ability to handle complex issues and problems, • Strong knowledge of safety regulations, and be familiar with traffic and driver laws, • Willingness to adhere to assigned routes, schedules, safety procedures, and transportation laws, • Excellent organizational and time management skills. Ability to meet deadlines, • Excellent customer service skills, • Good attention to detail, • Ability to meet deadlines, • Ability to work overtime as needed Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Constantly – at least 51%, • Walk: Must be able to move about inside/outside office or work location - Occasionally – up to 20%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Up to 10 pounds - Constantly – at least 51%, • Up to 25 pounds - Constantly – at least 51%, • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - Occasionally – up to 20%, • Handles or works with potentially dangerous equipment - Frequently – 21% to 50% Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job DescriptionDescription: Company Overview Smith Turf & Irrigation is the leading distributor and retailer in the golf, grounds and landscaping industry. We offer a comprehensive selection of equipment, irrigation and landscape products and support our customers with technical expertise and service. Since 1925, Smith Turf has built an unmatched reputation for outstanding customer care, service and support across North and South Carolina, Virginia and Tennessee. STI is a family owned business that believes in working as a team and fosters a family oriented culture. Position Overview Primary responsibility includes driving commercial motor vehicles, short and long distances, to deliver a variety of products to customers while maintaining compliance with all Company safety policies and state and federal transportation regulations. What You’ll Do · Responsible for operating a CMV single unit and/or truck-trailer combination to transport and deliver product, over intercity routes and/or across state lines · Load and unload the vehicle, ensuring that all products are properly secured · Inspect vehicles for mechanical items and safety issues and perform daily pre-trip and post-trip inspections and report any issues to management · Maintain records required for compliance with state and federal regulations, including but not limited to DOT hours of service, E-logs, rest breaks and any other record required by law · Responsible for following safety policies and procedures, including PPE requirements · Operate forklift or non-motorized equipment to load and/or off load product to designated area(s) · Maintain communication during deliveries to ensure any updated instructions are received · Maintain paperwork and documentation of deliveries and pickups · Stay in compliance with annual training requirements · Maintain an active CDL license, medical card and driving history that meets insurance standards · Follow all traffic laws and report all violations and incidents Mental & Physical Requirements: · Ability to perform simple mathematical calculations and ability to handle paperwork, follow instruction, read road signs, maintain logs etc · Ability to apply knowledge of commercial driving and skills in maneuvering vehicle at varying speeds in difficult situation, such as heavy traffic, inclement weather or in tight spaces · Position requires the ability to lift, push or pull up to 100lbs on a regular basis and up to 150lbs on occasion · Able to bend over to pick up product, occasion squatting and climbing · Requires the ability to physically operate equipment according to the manufacture specifications and the Company’s safety policies Working Environment & Conditions: · This position requires working in an external environment and requires 8+ hours a day of standing, sitting, climbing, kneeling, stooping Education, Experience & Training: · High School diploma/GED · A minimum of 2 years of commercial trucking · Must meet insurance standards Benefits · Competitive Compensation · Medical, Dental, Vision, Short and Long Term Disability, Life Insurance · Paid Time Off and Paid Holidays · 401(k) with Company Match · Employee Referral Program · Opportunity of Advancement · Paid Training and Certifications · Free Counseling Services- EAP · Product Discounts · Weekends Off! STI is strongly committed to providing equal employment opportunities for all employees and all applicants for employment. All employment decisions at STI including those relating to hiring, promotion, transfers, benefits, compensation, placement, and termination will be made without regard to race, color, national origin, genetic information, creed, sex, sexual orientation, gender, gender identity, religion, age, veteran status, uniform service, pregnancy, disability, or any other factor protected by applicable law. Requirements:

Job DescriptionDescription Material Handling Delivery Driver – Haul Truck/Rollback (Local Routes | Operator Experience Preferred) Charlotte, NC WMH – Driving the Industry Forward for 35+ Years Home Daily • Local Routes • Real Growth • Industry-Leading Equipment Drive the Machines That Move the IndustryAt WMH, we don’t just transport equipment — we power the operations behind the Southeast’s largest warehouses, logistics hubs, and industrial facilities. We’re hiring a Material Handling Delivery Driver (Haul Truck/Rollback) who can safely load, transport, and unload forklifts, scissor lifts, man lifts, and other industrial equipment with precision and professionalism. If you have rollback experience, love operating equipment, and want a career with stability and upward mobility, this is your next step. What You’ll Deliver (Literally)You’ll be transporting: • Forklifts, • Scissor lifts, • Small man lifts, • Other material handling equipment This is local & regional delivery — NOT long-haul freight. Most routes cover our Charlotte, Concord, and Hickory branch territories, with occasional runs into GA, TN, or AL for major customer projects. What You’ll Do (Day-to-Day) Precision Transport & Loading • Operate a tandem axle rollback haul truck, • Load & unload equipment using hydraulic tilt beds & winches, • Secure loads using chains, binders & DOT-compliant methods, • Verify load accuracy before departure, • Operate forklifts/equipment on-site to position machinery, • Perform DOT pre-trip & post-trip inspections, • Uphold all DOT, OSHA & FMCSA standards, • Monitor truck condition, tires, fluids & basic maintenance, • Report mechanical issues immediately, • Deliver with professionalism and clear communication, • Obtain signatures/documentation, • Represent WMH with integrity and customer care, • Assist with yard organization when not on deliveries, • Stage equipment & support warehouse operations, • Keep trucks clean, organized & ready for next dispatch You’re not just driving — you’re representing WMH and ensuring equipment arrives safely, on time, and ready for use. ⭐ What You Bring✔ 3+ years rollback/haul truck or heavy equipment delivery ✔ Proven ability to load, secure & transport industrial equipment ✔ Forklift/telehandler experience preferred ✔ Strong navigation & route planning abilities ✔ Ability to lift up to 75 lbs & work in outdoor environments ✔ Customer service mindset ✔ Self-directed, reliable, safety-first Licenses • CDL Class A preferred, • DOT medical card (or ability to obtain), • Forklift certification (we can train) This isn’t just a job behind the wheel — it’s a step into a growing industry with real upward mobility. Pay Range Compensation is based on experience, skill set, and operator ability. Why WMH?Because here, you’re not just a driver — you’re the person trusted to move the machines that move industries. At WMH, you get: Local routes – home every night Hands-on equipment experience Growth opportunities in Parts, Service, Delivery, and Operations Competitive pay Premium medical, dental, vision, Life, HSA/PPO Uniforms + weekly laundering Safety boot allowance Cell phone allowance 401(k) match up to 9% + profit sharing Paid time off + holidays Career pathways inside a fast-growing company OEM & in-house technical training A culture built on integrity, initiative & teamwork This isn’t a ‘drop and go’ job — it’s a career with structure, support, and real upward momentum. It’s not just driving — it’s building a future with traction. About WMHFor over 35+ years, WMH has been a leading material handling provider with 11 branches across the Southeast. We support thousands of customers with forklifts, parts, service, rental equipment & fleet solutions. WMH is a leader in material handling, automation, fleet technology, and industrial equipment solutions. We’re growing fast — and hiring people who want to grow with us. We invest in integrity, initiative, growth, excellence & teamwork — and in the people who embody those values. Ready to Drive Your Career Forward?Apply now and join a team that invests in your growth, values your skill, and keeps you moving forward — every day. Apply Today:

Job Description Are you tired of being on the road for days or weeks at a time? Do you wish you could have a successful trucking career while also maintaining a consistent life at home? Drive for Carter Lumber and not only will you have a stable, predictable schedule that allows you to be home every night, you’ll have the opportunity to build your career to whatever you desire! We are a growing company and we want our people to grow right along with us. Our Story Carter Lumber was founded in 1932 by W.E. Carter. For 90 years, we have strengthened our company by staying true to our values, which include honesty, hard work, and putting people first. What started as a single lumberyard in Akron, Ohio, is represented today by seven brands servicing professional builders and homeowners across thirteen states with more than 160 locations. Despite our growth, we are still a family-owned company. Our core values and our people-first culture remain the same. Description: As one of our CDL Delivery Specialists, you will be responsible for transporting orders to local customer jobsites in a safe and timely manner using our well-maintained and company-owned fleet. You will ensure that daily delivery schedules are met while providing friendly and professional customer service. While on site, you will unload using dump bed or truck-mounted forklift to place the customer’s materials right where they need them. Requirements: • Previous delivery experience, preferably with building materials, • Experience operating a truck-mounted forklift, • An acceptable driving record and a current CDL license, • Familiarity with building materials and delivery equipment is preferred, • Ability to be a team player Benefits (full-time employees) • Health, Dental, Vision (Single and Family Plans) available after 30 days of employment, • Short and Long-Term Disability, • Company-paid life insurance and AD&D, • Optional supplemental life insurance, • Company-match 401(k), • Vacation time and paid holidays, • Vendor incentives, • Room for growth; we promote from within! FNpNgYTzP1

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Maintenance Technician The QP Maintenance Tech is responsible for but not limited to the following areas of working on and maintaining horizontal form fill and seal equipment, shrink wrap tunnels, forklift minor repairs, stretch wrapper, print registered bundle wrappers and heavy electrical work in the warehouse along with building maintenance. He/she must have great communication skills through phone, email and personal contact. Pay: $30.00-$32.00/hr Shift: 2:00pm-10:30 pm Responsibilities and Essential Duties • Perform routine preventative maintenance on mechanical handling equipment (forklifts, pallet jacks, sweepers, etc.), • Document records of maintenance, inspections, and repairs., • Select repair parts and update parts records., • Repair mechanical damage and replace defective parts, which may include welding, brazing, and soldering. Repairs are made to mechanical handling equipment, racking, floors, plumbing, piping, and other warehouse structural components., • Maintenance and repair of batteries and chargers., • Applies mechanical skills and knowledge to troubleshooting and repair of electrical, plumbing, pipe fitting, fabrication, building construction, and other warehouse maintenance/repair situations., • Reads and interprets schematics, drawings, and other diagnostic aids in the scope of troubleshooting, repair, and fabrication work., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Familiar with mechanical hand tools, and with measuring (tape measures, micrometers, drill gauges, etc.), • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. Candidate Requirements- Tangibles • Strong electrical troubleshooting skills, • Strong mechanical aptitude, • Understanding of high-voltage wiring (480V 3-phase motors), • Multi-craft maintenance and repair (e.g., performing interrelated repairs on electrical systems and mechanical systems, • Willingness to work under pressure to fix equipment, • Work urgently to get the equipment back up and running, • Troubleshooting issues on a wide variety of equipment, • Will conduct repair failures of production and facilities equipment, • Ensure maximum equipment efficiency, effectiveness, and reliability, • Responding to maintenance calls is part of your job, and this can sometimes mean helping complete a repair that has already been started, • Customer Service: given our emphasis on mechanical aptitude, you might be surprised to see customer service listed here, but remember we interact with all levels of team members on the floor. It is important that you, and we as a team, treat all team members with the same level of service as we would our consumers., • Flexibility: you'll be switching gears, shifting priorities, and balancing task lists with calls for maintenance repairs. Flexibility - and keeping your cool - will allow you to both focus and prioritize your work., • Self-Starter: you will often find yourself working unsupervised, so taking ownership of your quality and speed of work is essential when conducting preventative maintenance or addressing equipment failure., • Basic computer skills including use of Microsoft Office., • Experience with C.M.M.S. software (Preventive Maintenance/Work Order distribution systems)., • Understanding encoders and equipment timing., • Knowledge of Servo drives and motors., • Variable Frequency drive operation and configuration., • Some college is desirable

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Maintenance Technician - Level B The QP Maintenance Tech is responsible for but not limited to the following areas of working on and maintaining horizontal form fill and seal equipment, shrink wrap tunnels, forklift minor repairs, stretch wrapper, print registered bundle wrappers and heavy electrical work in the warehouse along with building maintenance. He/she must have great communication skills through phone, email and personal contact. Job Type: Full-time Pay: $34.00 - $38.00 per hour Responsibilities and Essential Duties • Perform routine preventative maintenance on mechanical handling equipment (forklifts, pallet jacks, sweepers, etc.), • Document records of maintenance, inspections, and repairs., • Select repair parts and update parts records., • Repair mechanical damage and replace defective parts, which may include welding, brazing, and soldering. Repairs are made to mechanical handling equipment, racking, floors, plumbing, piping, and other warehouse structural components., • Maintenance and repair of batteries and chargers., • Applies mechanical skills and knowledge to troubleshooting and repair of electrical, plumbing, pipe fitting, fabrication, building construction, and other warehouse maintenance/repair situations., • Reads and interprets schematics, drawings, and other diagnostic aids in the scope of troubleshooting, repair, and fabrication work., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Familiar with mechanical hand tools, and with measuring (tape measures, micrometers, drill gauges, etc.), • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. Candidate Requirements- Tangibles • Strong electrical troubleshooting skills, • Strong mechanical aptitude, • Understanding of high-voltage wiring (480V 3-phase motors), • Multi-craft maintenance and repair (e.g., performing interrelated repairs on electrical systems and mechanical systems, • Willingness to work under pressure to fix equipment, • Work urgently to get the equipment back up and running, • Troubleshooting issues on a wide variety of equipment, • Will conduct repair failures of production and facilities equipment, • Ensure maximum equipment efficiency, effectiveness, and reliability, • Responding to maintenance calls is part of your job, and this can sometimes mean helping complete a repair that has already been started, • Customer Service: given our emphasis on mechanical aptitude, you might be surprised to see customer service listed here, but remember we interact with all levels of team members on the floor. It is important that you, and we as a team, treat all team members with the same level of service as we would our consumers., • Flexibility: you'll be switching gears, shifting priorities, and balancing task lists with calls for maintenance repairs. Flexibility - and keeping your cool - will allow you to both focus and prioritize your work., • Self-Starter: you will often find yourself working unsupervised, so taking ownership of your quality and speed of work is essential when conducting preventative maintenance or addressing equipment failure., • Basic computer skills including use of Microsoft Office., • Experience with C.M.M.S. software (Preventive Maintenance/Work Order distribution systems)., • Understanding encoders and equipment timing., • Knowledge of Servo drives and motors., • Variable Frequency drive operation and configuration., • Basic knowledge of logic software., • Some college is desirable Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Brookshire, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at .

Job Description Mad City Windows & Baths, a Renuity Company Warehouse Associate Starting Pay $18-$22/hr Mad City Windows & Baths, a proud company of the Renuity family, where innovation and excellence drive everything we do. As part of a powerful network of seven of the most trusted home renovation companies in America, we are on a mission to revolutionize home improvement—making it faster, easier, and stress-free. We are helping homeowners create spaces they love, without the hassle. With expert teams across 36 states and growing, there’s likely a Renuity home in your neighborhood. We value fresh perspectives and welcome candidates from all backgrounds to bring their unique experiences and ideas to our team. And we’re just getting started! What We Offer * Base hourly pay ($18-$22/hr) * Health, Dental, Vision, Disability & Voluntary Insurance * 401K plan with company match * Paid holidays and vacation days * Advancement opportunities to grow within the company About the Role In this position, you will: * Maintain receiving, warehousing, and distribution operations by initiating, coordinating, and enforcing program, operational, and personnel policies and procedures * Control inventory levels by conducting physical counts * Maintain physical condition of warehouse by planning and implementing new design layouts, inspecting equipment, issuing work orders for repair and requisitions for replacement * Operate warehouse equipment, including forklift to place products and materials in proper place * Load and log materials onto truck and makes notation of returned materials * Prepare jobs and materials for all crews * Clean trucks (both inside and out) * Deliver material/transporting employees to job sites * Other duties as assigned Key Qualifications * Must have a valid Driver's License * Minimum of 1-2 years Warehouse experience * Ability to lift 50 lbs regularly * Must know safe warehouse practices * Must be willing to deliver product between offices on daily basis * Forklift experience required * Knowledge of home remodeling products or construction materials is a plus About Renuity Renuity, headquartered in Charlotte, NC, is a leading home improvement services business with a rapidly expanding national footprint. Renuity currently operates across 36 states and has created hundreds of thousands of happier homeowners across the United States who have chosen Renuity for their home improvement needs. Renuity is redefining the home improvement experience with a focus on trust, innovation and customer-first service. To learn more, visit Renuity's About Us page. Renuity and its affiliates are committed to equal opportunity. We value and embrace diversity and inclusion of all Team Members. If you have a disability under the Americans with Disabilities Act or similar law, and you need an accommodation during the application process or to perform these job requirements, or if you need a religious accommodation, please contact . If you have a question regarding your application, please contact To access Renuity's Privacy Policy, please click here: Privacy Policy

Job DescriptionDescriptionTruly Good Foods has sales and distribution offices in Orlando, Atlanta, Washington DC, Reno, Dallas and Charlotte, NC. Our SQF, Kosher and organic production facility in Charlotte roasts nuts & seeds daily and blends over 60 bulk snack mixes. These facilities also package and re-box many of our items to meet our customers’ varied needs. Charlotte is our corporate headquarters, and is home to purchasing, accounting, and sales & marketing offices. $250.00 Sign on Bonus after 90 days in good standing The Order Puller pulls products from the warehouse and packages the items appropriately to be distributed to customers. Key Responsibilities • Reads work order to determine items to be moved, gathered, or distributed., • Conveys materials and items from receiving or production areas to storage or to other designated areas., • Sorts and places products or items on racks, shelves, or in bins according to predetermined sequence., • Sorts and stores perishable goods in refrigerated rooms., • Fills requisitions, work orders, or requests for items and distributes items to production workers., • Assembles customer orders from stock and places orders on pallets or shelves or conveys orders to packing station or shipping department., • May load product onto delivery trucks., • Marks materials with identifying information., • Opens bales, crates, and other containers., • Records amounts of materials or items received or distributed., • Uses computer/scanner to enter records., • Compiles worksheets or tickets from customer specifications., • Completes requisition forms to order supplies from other plant departments., • Prepares products for shipping by wrapping freight line shipments and packing small packages for processing., • Places items on dry ice or polar packs if necessary., • Assists in maintaining inventory records., • In keeping with our value of Customer Satisfaction, this position is expected to provide high-quality customer service to our internal and external customers, vendors, and others alike., • Adheres to company Policy and Procedures., • Performs duties as workload necessitates., • Maintains a positive and respectful attitude., • Communicates regularly with supervisor and about department issues., • Demonstrates flexible and efficient time management and ability to prioritize., • Consistently reports to work on time, prepared to perform duties of position., • Meets department productivity standards., • May perform other duties as required.Scope of Responsibility • This job follows standard practices and procedures and is expected to accomplish work assignments with a limited amount of supervision. Knowledge and Skill Requirements • Language Ability: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers and other employees of the organization. Ability to read and understand English., • Math Ability: Ability to calculate figures and amounts such as discounts, proportions, and percentages. Ability to apply concepts of basic algebra., • Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • Computer Skills: Able to use basic computer programs and scanners. Education and Experience • High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. Physical Demands • The employee must frequently lift and/or move up to 100 pounds and occasionally lift and/or move up to 50 pounds. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to walk; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. Tools, Equipment, and Machinery • Must have ability to operate pallet jack, forklift or similar machinery, tools, and equipment, as needed, in order to perform the essential functions of the job. Work Environment • Work is performed in a shipping environment and disruptions occur frequently., • The noise level in the work environment is usually moderate to loud. Travel Required • N/A To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job duties. Skills Knowledge and Expertise • Warehouse/Distribution Center, • RF Scanners, • Order Pulling, • Raymond Cherry Picker, • Affordable healthcare (medical/dental/vision), • Opportunity to participate in the Health Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA), • Short Term Disability Insurance paid by the company, • Basic life Insurance equals to your annual salary paid by the company, • Employee Assistance Program – paid by the company, • Long Term Disability Insurance, • The opportunity to purchase additional voluntary insurance coverage for:, • Life Insurance, • Accident, • Whole Life, • Prepaid Legal, • PTO (Paid Time Off), • 9 Paid Holidays per year, • 401-k Plan (eligible after 6 months of employment)

Job Description Detailed Description: Are you a dependable, team-oriented individual with a can-do attitude? We are looking for you! Our Warehouse Team Members serve as a key link between our company and our customer base of collision repair shops in the region. The goal for each Warehouse Associate is to be a team player and be able and willing to go the extra mile. A Day in the Life of a Warehouse Team Member with Empire Auto Parts may include: · Processing, packing, and shipping orders accurately · Organizing stocks and maintaining inventory · Inspecting products for defects and damages · Examining ingoing and outgoing deliveries · Organizing warehouse space · Receiving, unloading, and placing incoming inventory items appropriately · Checking, verifying, and filling customer invoices · Abiding by all company safety and hygiene regulations · Keeping warehouse clean and organized daily · Performing duties as assigned by supervisor Our Ideal Warehouse Team Member Will: · Possess a friendly and sincere demeanor · Ability to work well in a team environment · Be able to multi-task and be detail-oriented · Have previous experience or knowledge of auto parts (forklift training and certification is a plus!) · Have a high school diploma or equivalent is a plus · Be at least 18 years old · Must have at least 1 year of cherry picker experience No EXCEPTIONS · Shifts - 6am start and 9 am start Ways to Standout: · Must be able to engage in frequent, repeated, rapid, and/or strenuous physical activity for long periods of time · Must be able to lift up to 50 lbs. and knowledge of how to lift and carry objects safely, cautiously, and effectively · Must be able to safely operate equipment, observe safety procedures, and meet safety requirements · Staging, loading, unloading parts, and stocking, locating, and maintaining warehouse inventory · Responsibilities include pulling orders for delivery and shipment · Ability to operate a forklift, hand truck, pallet jack, and other warehouse equipment · Adequate knowledge of warehouse data system What We Offer: · Health, Dental & Vision Insurance · Health Savings Account (HSA) with Employer Contribution · Optional Life Insurance, Long & Short-Term Disability, Critical Illness, Accident and Hospital Insurance · 401K Retirement Plan · Paid Training · Paid Time Off · Paid Sick Days · Paid Holidays, Including 1 Floating Holiday (Your Birthday) · Weekly Pay · M-F work week; No weekends Employee Perks: · Casual Dress Code · Teamwork Environment · Fun Anniversary Party · Free Company Apparel · Free Parking · Employee Recognition Empire Auto Parts, LLC is an equal opportunity employer and affords equal opportunity to all applicants and employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other status protected under local, state, or federal laws.

Job DescriptionJob Summary We are seeking a reliable General Warehouse Associate to support shipping, receiving, and material flow in an industrial warehouse environment. This role is designed for candidates with hands-on warehouse or distribution experience who are comfortable working around powered industrial equipment. Equipment used may include reach trucks, counterbalance forklifts, and pallet jacks. Side loader experience is considered a plus, particularly for candidates supporting material handling or loading functions. Key Responsibilities • Load, unload, and move materials using forklifts, reach trucks, pallet jacks, or other warehouse equipment, • Receive inbound inventory, verify quantities, and accurately tag and label materials, • Pick, stage, and prepare outbound orders according to work orders and shipping documentation, • Transport raw materials and finished goods throughout the warehouse to support production and shipping needs, • Perform inventory transactions including receipts, transfers, and shipments using the warehouse system, • Assist in maintaining material availability to prevent production or shipping delays, • Maintain a clean, organized, and safety-compliant work environment Qualifications and Skills • Previous experience in an industrial warehouse, distribution center, or manufacturing setting preferred, • Forklift experience is a plus, including reach truck and counterbalance forklifts, • Experience with pallet jacks required; side loader experience is a plus for material handling or loading roles, • Ability to safely operate or be trained on powered industrial equipment, • Basic computer skills for inventory tracking, tagging, and shipping/receiving functions, • Strong attention to detail and ability to follow safety procedures and work instructions, • Basic math skills for counting, measuring, and verifying materials, • Ability to lift, push, pull, and stand for extended periods in a warehouse environment, • Steel-toe boots and required PPE must be always wornSchedule:, • 2nd Shift | 1:00 pm-9:00 pm | Monday-Friday | OT available NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities. #TalrooRec

Job Description Please note that this is a temporary-to-hire position, and applicants will be hired through our preferred temporary agency. About the Role: The Warehouse Associate/Forklift Driver plays a critical role in ensuring the efficient and accurate handling of products within the distribution network. This position focuses on supporting the day-to-day operations of the distribution center, including receiving, storing, and shipping inventory to meet customer demands. The role requires close collaboration with team members to maintain inventory accuracy and uphold safety standards. The Associate II will contribute to optimizing workflow processes to enhance overall distribution efficiency. Ultimately, this position supports the seamless movement of goods from the warehouse to customers, directly impacting customer satisfaction and operational success. Responsibilities: • Receive, inspect, and accurately process incoming shipments according to company procedures., • Pick, pack, and prepare orders for shipment ensuring accuracy and timeliness., • Maintain organized and clean work areas to comply with safety and quality standards., • Assist with inventory counts and report discrepancies to management promptly., • Collaborate with team members and supervisors to meet daily distribution goals., • Adhere to all company policies, including safety protocols and regulatory compliance., • High school diploma or equivalent., • Ability to lift and move materials up to 50 pounds regularly., • Basic math and reading skills to accurately process orders and documentation., • Prior experience in a warehouse or distribution environment is preferred but not required., • Authorization to work in the United States., • Basic forklift operations experience (6 months – 2 years, rider/walkie), • Familiarity with inventory management systems and barcode scanning technology., • Strong organizational skills and attention to detail., • The required skills such as basic math, reading, and physical stamina are essential for accurately processing orders and handling materials safely throughout the day., • Effective communication and teamwork skills enable the Associate II to coordinate with colleagues and supervisors to meet operational targets., • Familiarity with inventory systems enhance efficiency and accuracy in daily tasks., • Attention to detail ensures that shipments are prepared correctly, reducing errors and improving customer satisfaction. Headquarters located in Oklahoma City, Oklahoma, CFS BRANDS is a market-leading designer, manufacturer and distributor of commercial foodservice, healthcare, and industrial hygiene products. CFS Brands is committed to creating an inclusive work environment with a diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age or veteran status. This employer participates in E-Verify. The employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee’s I-9 to confirm work authorization.

Job DescriptionDescription: Company Overview Smith Turf & Irrigation is the leading distributor and retailer in the golf, grounds and landscaping industry. We offer a comprehensive selection of equipment, irrigation and landscape products and support our customers with technical expertise and service. Since 1925, Smith Turf has built an unmatched reputation for outstanding customer care, service and support across North and South Carolina, Virginia and Tennessee. STI is a family owned business that believes in working as a team and fosters a family oriented culture. Position Overview Warehouse associates are responsible for performing an array of duties suck as receiving and processing incoming inventory, picking and filling orders. What You’ll Do • Pick, pack and process multiple orders at one time, • Accurately stage and sort products for loading / shipping, • Load and unload trailers and containers, • Maintain a clean and safe workspace, • Sort and place stock in racks or other designated areas, • Move materials within the warehouse and weigh products for shipment, • Package finished products for shipping (shrink wrap, boxing, labeling), • Electronically scan products using a warehouse management system, • Ensure damaged products are identified and removed when received, • Process BOL and give paperwork to the correct departments, • Assemble customer orders from stock and place orders on pallets for shipping, • Use computer to enter records, • Operate forklift, pallet jacks and a variety of warehouse mechanical equipment · Minimum of 2 years of prior warehouse experience • Ability to read and follow written and oral instructions, • Ability to lift up to 75lbs Benefits · Competitive Compensation · Paid Time Off · 401(k) with Company Match · Weekends Off! STI is strongly committed to providing equal employment opportunities for all employees and all applicants for employment. All employment decisions at STI including those relating to hiring, promotion, transfers, benefits, compensation, placement, and termination will be made without regard to race, color, national origin, genetic information, creed, sex, sexual orientation, gender, gender identity, religion, age, veteran status, uniform service, pregnancy, disability, or any other factor protected by applicable law. Requirements:

Job Description Be Part of Something That Matters At Viking, we're not just building fire protection equipment - we're building peace of mind. Our products help protect lives and property around the world, and we take that responsibility seriously. With over 100 years of experience and a reputation for doing things the right way, we're driven by our values: innovation, integrity, and a deep commitment to safety. If you're looking for a career where your work truly makes an impact, where ideas are welcomed, growth is encouraged, and every day has purpose, Viking is the place for you. Join us and help protect what matters most! Position performs warehouse tasks within a leading fire protection supplier, operating required equipment, and retrieving or stock desired materials. Position requires knowledge of all shipping, receiving, and packing processes and standards set by the company. Work Schedule: Monday - Friday, 7 am - 4:00 pm WAREHOUSE ATTENDANT RESPONSIBILITIES: • Performs repetitive or routine warehousing tasks involved with shipping, receiving, will-call, inventory control, and/or material handling., • Operates forklift in order to pick orders or receive in stock. Completes daily lift equipment inspections. Uses forklift to load and unload pipe and other material from flat bed and/or box type trailers., • Pick orders by utilizing RF technology and/or by identifying items on a paper pick ticket according to bin location, part number, and/or description., • Utilize JDE operating system in inquiries for shipping and receiving functions., • Lift boxes of material to and from locations for shipping and receiving processes and procedures., • During packing confirm correct material pulled during picking process., • Ensure all materials a packed properly., • Utilize Varsity system to get packed materials shipped correctly., • Operates shrink wrap machine to ready crates and boxes for loading process., • Operates pneumatic bander to ready pipe bundles for shipment when required., • Completes training curriculum including but not limited to safety requirements while demonstrating an acceptable level of competence as defined by management., • Follows all company policies and procedures., • Performs job duties within the guideline of Standard Operating Procedures (SOP's)., • Uses all Personal Protective Equipment (PPE) as mandated per job function., • Provide excellent customer service and maintain professionalism with customers and coworkers., • Minimum of 6 months in a previous warehouse or material handler position, • Basic keypad and/or keyboard skills, • Prior experience with RF technology used in bar coding environment helpful, • 1 year working in a multitask environment while under time constraints Medical, Dental, Flexible Spending Accounts, Vacation, Holidays, Life Insurance, 401k, Tuition Reimbursement, Fitness Center Reimbursement, Boot Reimbursement Job Posted by ApplicantPro

Job DescriptionDescription: COMPANY OVERVIEW: Renova One unites 11 trusted companies under one brand, delivering seamless renovation and restoration solutions for multi-family, single-family, and commercial properties nationwide. With expertise in flooring, carpet cleaning, turnkey solutions, interior and exterior renovations, restoration, and design, we simplify projects while maintaining exceptional quality. Built on integrity, innovation, and strong partnerships, Renova One is more than a vendor—we’re a trusted partner committed to enriching spaces and creating lasting value. JOB SUMMARY: The Warehouse Associate is responsible for supporting daily warehouse operations, including receiving, storing, organizing, and distributing materials and products. This role plays a crucial part in maintaining inventory accuracy, ensuring timely order fulfillment, and upholding warehouse safety standards. The Warehouse Associate will work closely with the warehouse team and other departments to ensure smooth and efficient operations. Requirements: RESPONSIBILITIES & DUTIES: • Safe use of production equipment to include, but not limited to floor cutting machine, order picker, pallet jack, forklift, • Receive incoming shipments of materials and products, verifying quantities and inspecting for damage or discrepancies, • Accurately record and label received items, and organize them in designated storage locations within the warehouse, • Retrieve and pack materials and products for customer orders according to picking lists and packing instructions, • Prepare orders for shipment by packaging items securely, labeling packages with shipping information, and arranging for carrier pickup or delivery, • Perform regular inventory counts and cycle counts to maintain accurate inventory records and identify discrepancies, • Assist with inventory replenishment by restocking shelves and picking materials from storage locations as needed, • Maintain a clean and organized warehouse environment by sweeping floors, emptying trash bins, and keeping aisles and storage areas clear of obstructions, • Operate warehouse equipment, such as forklifts, pallet jacks, and hand trucks, safely and efficiently to move materials and products as required, • Follow all safety protocols and procedures to ensure a safe working environment for yourself and your colleagues, • Collaborate with other warehouse team members and department supervisors to prioritize tasks and meet daily production goals, • High school diploma or equivalent, • Previous experience working in a warehouse or similar environment preferred, • Forklift certification or willingness to obtain certification is a plus, • Basic math and computer skills, including the ability to use inventory management software and handheld devices, • Physical stamina and the ability to lift and move heavy objects (up to 50 pounds) on a regular basis, • Attention to detail and accuracy in performing tasks such as counting, labeling, and recording inventory, • Strong communication skills and the ability to work effectively as part of a team, • Willingness to follow instructions and adhere to company policies and procedures, • All offers of employment are contingent upon a drug panel and a background check, • Valid Driver's License is required, • Your information will be kept confidential according to EEO guidelines

Job DescriptionOur Warehouse team members are responsible for receiving materials in the warehouse, loading trucks, and processing inventory. Richards Building Supply is seeking a Warehouse Team Member for our Charlotte, NC location. Forklift experience required. Your next career starts here!Benefits: • 20 PAID DAYS OFF (includes PTO, Holidays and Family Focused Company Closure between Christmas and New Years)., • Bonus Incentive program as well as Holiday bonuses and other bonus opportunities!, • Competitive Hourly Rate with great OT potential during peak season hours., • Flexible work/life balanced hours, home every night and typical schedule Monday-Friday 7:00 A.M. – 4:00 P.M., • Significant employer contributions towards monthly premiums for Medical, Dental, Vision, Group Life and AD & D benefit plans., • Additional Voluntary benefit options available including Short Term and Long Term Disability coverage, Accidental Injury, Critical Illness and Cancer plans as well as additional Life and AD& D benefit policies., • 401K program with a best in industry company match., • Opportunity for career advancement, • Family owned, operated and focused company!Qualifications:, • High School degree or GED., • Ability to stand, bend, twist, through complete shift., • Forklift experience required., • Positive attitude and team player., • Adhering to all safety policies, including wearing safety harness and other required equipment., • Work Monday through Friday and opportunity for overtime during the busy season.Requirements:, • Must be able to continually lift 50-100 lbs. of material throughout the day. Some lifting over 100 lbs. will be required., • Load trucks with material scheduled for the day’s deliveries within compliance of securing and distributing weight limits according to DOT regulations., • Providing superior customer service, • Double checking all loads for accuracy and ensuring that they are thoroughly secured for delivery, • Providing warehouse support including shipping/receiving, • Pulling order for walk-in customers, • Must have a clean driving recordIt’s more than a job, it is your Career! Submit your resume today to join our exciting and growing family. #ZR Charlotte Richards Building Supply is a wholesale building material distributor serving 15 states with over 65 locations! As a family owned, operated and focused company, Richards Building Supply has spent nearly 50 years building a thriving and profitable organization, as well as invaluable business relationships. Richards stocks a comprehensive line of products such as residential and commercial roofing, siding, windows, decking, soffit, doors, molding, rainware, cabinets, and more! Learn more about us here: Richards Building Supply believes in hiring military veterans at any level for any position. We know your service trained you in many of the areas we value, such as; leadership, teamwork, performance, integrity, and safety. If your experience matches our requirements, we want you to apply today. It’s more than a job, it is your Career! Submit your resume today to join our exciting and growing family.

Job Description The Automotive Parts Shipping and Receiving Associate verifies and keeps records on incoming and outgoing shipments and prepares items for shipment. Assures proper control of parts inventory and related administrative functions. What are the day-to-day responsibilities? • Count, weigh or measure items on incoming and outgoing shipments, verify information against invoices, orders and other records, • Determine method of shipment, utilizing knowledge of shipping procedures, routes, and rates, • Keep all bins, aisles and storage areas clean and clearly labeled, • Maintain receiving and shipping records, delivery truck maintenance records and returned parts records, • Unpack and examine incoming shipments, reject damaged items, record shortages, and correspond with shipper to rectify damages and shortages, • Ensure that outgoing shipments meet specifications, • Maintain inventory of shipping materials and supplies, • Must be able to operate heavy machinery (i.e. forklift, pallet jack, etc.) What are the requirements for this job? • High School Diploma or Equivalent, • Ability to read and comprehend instructions and information, • One year of experience in a retail or wholesale parts department, • Must have a valid driver's license, • Ability to interpret vendor catalogs., • Ability to use parts department computer system, • Good communication skills, • Valid in-state driver’s license and an acceptable, safe driving record

Job DescriptionDescription️ Seize the Opportunity: As a Senior Technician, You're Not Just Fixing Equipment—You're Powering Industry, Mentoring Talent, & Driving Excellence. ⚙️ Why WMH? Because Your Career Deserves More! At WMH (), we don’t just offer jobs—we build unstoppable careers. With over 35 years of industry excellence, we’ve grown into the Southeast’s fastest-growing material handling leader, with 11 locations across NC, SC, TN, VA, GA & AL—and we’re just getting started. We operate on honor, integrity, and a relentless drive for excellence. Your success is our mission, which is why we invest in training, mentorship, and leadership development to accelerate your career. What sets us apart? We’re not just another dealership—we’re redefining the industry as a full-scale solutions provider, delivering cutting-edge automation, fleet technology, and next-level innovation that keeps businesses moving forward. When you join WMH, you’re stepping into a future filled with opportunity, advancement, and impact—because here, your career moves forward. WMH is seeking a Senior Mechanic/Technician to join our elite team. As a Senior Mechanic/Technician, you’ll play a critical role in ensuring peak performance, taking charge of advanced diagnostics, precision repairs, and proactive maintenance on cutting-edge equipment. But this role is more than just turning wrenches—it’s about leading by example, optimizing performance, and mentoring the next generation of skilled technicians. Your expertise will fuel operational success, maximize uptime, and push industry standards forward while fostering a team-driven culture of excellence. At WMH, we don’t just fix equipment—we keep industries moving, develop top-tier talent, and set the gold standard for reliability and innovation in material handling.️ Your Mission? To be the driving force behind operational excellence, delivering advanced diagnostics, expert-level repairs, and proactive maintenance that maximizes uptime and efficiency. You'll play a critical role in ensuring peak performance for our clients while leading, mentoring, and developing the next wave of skilled technicians. At WMH, your experience isn’t just valued—it’s the foundation for the future. Key ResponsibilitiesIndependence & Field Expertise ✅ Hit the Road: Start your workday from home, servicing customers on-site in a company-provided van with the latest tools & diagnostic technology. ✅ Own Your Territory: Maintain and repair forklifts, heavy machinery, and material handling equipment across warehousing, distribution, and manufacturing industries. ✅ Be the Expert in the Field: Deliver on-site service with speed, accuracy, and professionalism—our customers rely on you! Advanced Diagnostics & Repairs✅ Troubleshoot Like a Pro – Diagnose complex mechanical, hydraulic, and electrical issues with precision and efficiency. ✅ Fix it Right, The First Time – Execute top-quality repairs & preventive maintenance to maximize uptime & minimize breakdowns. ✅ Own the Fleet – Maintain WMH and customer equipment at peak performance through scheduled maintenance, inspections, and safety checks. Lead & Mentor the Next Generation️‍✅ Train & Develop Junior Techs – Share your expertise, foster a culture of excellence, and guide the next generation of mechanics. ✅ Be a Leader – Set the gold standard in service, helping newer technicians refine their skills and elevate their careers. Customer Engagement & Service Excellence✅ Deliver Outstanding Customer Support – Work closely with clients, providing expert consultation, service recommendations, and technical solutions. ✅ Customer-Focused Communication – Keep customers informed about service updates, repairs, and proactive maintenance. Documentation & Compliance️ ✅ Precision Documentation – Maintain accurate service reports, repair logs, and work orders to ensure seamless operations. ✅ Safety & Compliance First – Uphold OSHA standards, industry regulations, and best practices to keep work environments safe and efficient. The Field: • Diverse job sites., • Weather-ready – wet, humid, hot, or cold. ✔ Technical Expertise: Advanced knowledge of diesel engines, hydraulics, electrical systems, and industrial machinery. ✔ Certifications: ASE Certification (preferred) in brakes, electrical, diesel, and preventative maintenance. Forklift certification a plus! ✔ Mechanical & Electrical Skills: Ability to diagnose, troubleshoot, repair, and maintain complex industrial equipment. ✔ Industry Knowledge: Familiarity with OSHA regulations, equipment compliance, and workplace safety standards. ✔ Problem-Solving Mindset: Strong troubleshooting and critical-thinking skills to resolve issues efficiently. ✔ Leadership & Mentorship: Proven ability to train, coach, and guide junior technicians. ✔ Customer Service Excellence: Outstanding communication and relationship-building skills. ✔ Technical Proficiency: Experience with diagnostic software, schematics, Microsoft Office, digital work platforms, & fleet management systems. ✔ Work Ethic & Drive: Self-motivated, detail-oriented, and results-driven. ✔ Physical Requirements: Ability to lift 50+ lbs, work in various conditions, and travel within assigned territory. ✔ Valid Driver’s License: Required for company van usage. Perks of Being a WMH Team Member:Premium Health Coverage – Your well-being matters! We offer premium medical, dental, and vision insurance with HSA & PPO options + company-paid AD&D & life insurance (with additional coverage available). Exclusive Training & Career Growth – Gain cutting-edge technical skills with our OEM-exclusive and in-house training programs. We invest in your growth, leadership, and future success. Time to Recharge – Enjoy a generous PTO plan + paid holidays so you can rest, recharge, and spend time with loved ones. Competitive pay & performance-Based Incentives -Earn what you're worth! 100% of your travel time is paid—no flat rates. ️ Tool Allowance (Paid Quarterly!) – Keep your gear in top condition with regular tool reimbursements. Uniforms Provided & Laundered Weekly – Look sharp on the job without the hassle! ️‍ PPE & Safety Shoe Allowance – We’ve got you covered with protective gear and workwear support. Stay Connected – Get a monthly cell phone allowance to ensure you have the tools to communicate effectively. Company Van, Tablet & Fuel Card – Take your fully-equipped van home and work within your service area with ease. Secure Your Future – 401(k) match up to 9% + profit-sharing benefits to help you build long-term financial success. Unmatched Job Stability in a Booming Industry – Material handling is the backbone of logistics, warehousing, and supply chains. Your skills will always be in demand. ⚖️ Work-Life Balance That Works for You – We know flexibility matters, and we offer schedules that support a thriving career and personal life. Ongoing Professional Development – We invest in your success with mentorship, leadership training, skill-building opportunities & career advancement opportunities. Be Part of Something Bigger – At WMH, you're not just another employee—you’re a key player in an industry that keeps the world moving. Your Cue: Take the Wheel of Your Future! This isn’t just another job—it’s your chance to be part of a powerhouse team that’s revolutionizing the industry and redefining careers. At WMH, we don’t just keep businesses moving—we propel careers to new heights. Don’t wait. Don’t watch. Be part of something BIG, something BOLD, something that makes you excited to jump out of bed every morning! The future is calling—ignite yours today! Apply now.

Job Description Who We Are The CRVA works to deliver experiences that uniquely enrich the lives of our visitors and residents. Through leadership in destination development, marketing and venue management expertise, the CRVA leads efforts to maximize the region’s economic potential through visitor spending, creating jobs and opportunities for the community. Brands supported by the CRVA include the Charlotte Convention Center, Spectrum Center, Bojangles Entertainment Complex, NASCAR Hall of Fame, Charlotte Film Commission, Visit Charlotte and Visitor Info Centers. Job Summary The Facility Operations Team Member keeps the facilities are in a constant state of readiness by ensuring the facilities are clean and in orderly condition; works to set up/break down rooms for events and maintains cleanliness of the front and back of house during events at the NASCAR Hall of Fame and the Charlotte Convention Center. Job Responsibilities • Essential Job Duties, • Works under direct supervision of facility operations supervisor to ensure that all setup activities and custodial needs are consistent with facility wide standards for all events as needed. Making sure turnarounds and changeovers are done in a timely and quality manner., • Sets up and breaks down tables and chairs, builds stages, move operable walls, placing barricades and other furnishings and equipment., • Ensures work areas are properly cleaned, maintained, and refreshed using appropriate equipment and supplies before, during and after events., • Ensures that all equipment is stored and maintained correctly and that all storage areas are clean and organized., • Maintains the facility, performing general routine and pre/during/post event related cleaning and maintenance that includes but not limited to sweeping, mopping, spot cleaning, scrubbing, glass cleaning and vacuuming exhibit halls, meeting rooms, restrooms, hallways, stairs, office space, and building exterior, empties trash bins and transports garbage to proper disposal containers per department waste management plan., • Conducts all required touch point cleaning, sanitizing, and disinfection protocols in accordance with the facility GBAC Star program, to help ensure a healthy and safe environment for all CRVA staff and guests., • Assists in the general housekeeping of restrooms as needed., • Communicates daily with management and team via two-way radio throughout scheduled work time., • Operates equipment to include pallet jack, forklift, carpet extractor, scrubbers, riding vacuum and walk behind vacuum cleaner., • Reports irregularities, discrepancies, injuries, property or equipment damage, loss of property and safety concerns promptly to supervisor., • Works according to established standards, protocols, and procedures set by CRVA and department leadership., • Conduct all operations in accordance with department safety standards., • Adheres to department uniform and grooming standards., • Successfully completes any required training or certifications courses deemed required by CRVA and department leadership in a timely fashion., • Always provides excellent customer service to our clients., • Reliable transportation is a must., • Must be able to work flexible hours to include days, evenings, weekends, and holidays., • Performs other duties as assigned by department leadership., • Consistently deliver the best in customer service. Model and be accountable ensuring that customers are always put first by living the CRVA Service Philosophy to deliver memorable customer experiences., • Champion CRVA’s mission, vision and core values and comply with organizations policies and procedures. Scope of Responsibility • This job has no budgetary responsibilities., • This job will have periodic access to confidential data including customer quotes, and company plans, designs, and programs. Supervisory Responsibility • This job has no supervisory responsibilities. Knowledge and Skill Requirements • Ability to read and interpret event set diagrams to accurately set rooms without direct supervision., • Operates various types of equipment and knows how to properly use various chemicals and supplies associated with tasks., • Ability to work independently with a sense of urgency, exercising good judgement and initiative as well as with a team in a fast-paced environment with a high level of accountability., • Ability to establish and maintain effective working relationships with co-workers, the public, and other departments, and agencies., • Ability to anticipate customer needs, builds positive relationships with customers and vendors, goes the extra mile to satisfy and exceed customer needs., • Treats all customers and vendors with highest degree of respect and courtesy, delivers exceptional service to internal and external customers; interacts with guests in a friendly, courteous, and polite manner., • Demonstrate knowledge or willingness to learn practices and procedures related to event set-up; typical methods and techniques for cleaning and maintaining the facilities; and proper use and care of department equipment, supplies, chemicals, and power tools., • Demonstrate a positive attitude and strong work ethic and attention to detail, without close supervision., • Follow all policies/procedures, risk management, safety precautions, rules, regulations, and emergency procedures established at the venues., • Meet the physical demands of the job. Must perform strenuous physical duties at times, including lifting, carrying, moving and climbing. Education and Experience • A High School Diploma or GED equivalent is required., • The employee must regularly lift, push/pull or move up to 70 pounds, unassisted., • Specific vision abilities required by this job include close vision. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl., • The employee must regularly use power hand tools. Work Environment • The noise level in the work environment is usually moderate based on event activity. Travel Required • This job may require travel between CRVA venues, at times. What We Offer • Education Reimbursement, • Comprehensive medical, dental, and vision coverage, plus other great benefits., • 457 Plan, • NC Retirement System plan, • CRVA University, • Employee Assistance Programs, • Employee 1st Culture, • CORE Values To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Our “employee first” culture requires engagement and engagement can’t happen without the voices of many talented individuals charting our direction.

Job DescriptionBarrMax is in search of a Production Technician! BarrMax Facility Overview Barrday has been manufacturing advanced technical fabrics for ballistic armor products in Charlotte since 2001. We are now opening a second facility at a new site in Charlotte to manufacture BarrMax. BarrMax (formerly Endumax) is a polyethylene tape product with incredible tenacity and stiffness properties, which makes it a natural addition to our product line. Its unique physical and chemical structure makes it – weight for weight – 11 times stronger than steel! The BarrMax production equipment has been relocated from Europe to our new facility in the Innovation Business Park. This state-of-the-art German manufacturing equipment is in the process of being reassembled and start-up trials will begin this summer with full production expected by the end of the year. We are looking for exceptional individuals to join us on the ground floor of this new endeavor. You will be part of creating a culture of respect and manufacturing excellence and as production increases, you will be teaching our new employees and could become a future leader in this facility. The work environment is outstanding: clean, bright, quiet, free of fumes and dust, and air conditioned. The business park has ample parking, two employee fitness centers, regular food trucks, a coffee shop, a convenience store and many more amenities. In the beginning, the work week will be a Monday to Friday day shift schedule, however, as production increases, it will become a rotating shift schedule to provide 24-hour coverage. Ideal candidate Personal Characteristics Excellent organizational skills: Keeps work area(s) neat, establishes and maintains locations for supplies and equipment, stocks work areas with essential supplies as they are depleted. Good problem solving and critical thinking skills: Needs to understand what each machine in the process is doing and how it can or will impact the product. Will need to make adjustments to the process using this understanding of the impacts. Collaboration and team-building skills: Being a team player is essential since all tasks will require close collaboration with co-workers. The goal will be to ensure that production procedures will be carried on smoothly to maximize efficiency and profits. Need to be willing to cooperate and communicate to resolve issues. Need to be available to cover on and off shift handoff and breaks for other team-mates. Need to be willing to actively train new employees. Flexibility: This role will involve working in all areas of the plant and doing other tasks in addition to the primary job description. SUMMARY Individuals in this role will be part of the 3-4 person team responsible for operating the equipment that manufactures BarrMax tape. Key Responsibilities: -Operates all equipment related to the BarrMax tape making process including: • Loading super sacs of polymer, • Loading and unloading rolls of tape, • Setting up and starting up production lines, • Monitoring processes and adjusting to keep product within specifications, • Using precision measuring devices to perform product approval tests -Raises quality concerns and contributes to their resolution -Uses ERP software to assign materials to work order, report production, locate materials, report non conformances and enter test results -Performs preventive maintenance tasks on production equipment as assigned -Keeps all equipment and work areas clean and left in excellent condition for next shift -Assists in training new hires to ensure their success -Other duties as assigned, including cross training within the department and other areas of the plant Key Qualifications/Skills: • High School Diploma or equivalent GED. Post secondary education in a technical field is strongly preferred, • 2+ years machine or process operator experience in a manufacturing environment, • Effective communication in English, includes speaking, writing and active listening, • Good leadership and training skills, • Ability to self-manage time and balance multiple priorities, • Excellent mechanical skills, including comfort with using tools to make simple repairs and adjustments, • Quick troubleshooting and problem-solving skills, • Use of measurement tools (caliper, micrometer etc.) and competence working in metric, • Competent math skills particularly as related to measurement and quantity calculations, • Computer literacy for completing tasks within ERP system, answering and sending emails and looking up documents, • Manufacturing setting within an air-conditioned facility, • Continuous periods of standing and walking required, • Considerable lifting and loading (with assistance of appropriate tools and machines), • Moving, bending, pushing and lifting capability up to 60 lbs., • Includes the use of sharp tools, • Access to medical, dental, vision insurance with wellness incentives., • 401(k) matching options., • Free life insurance, disability insurance and more., • Tuition assistance. If you require accommodation to complete an online application, please contact Eric Courier at 980-219-0497.

Job DescriptionDescriptionTake Your Career to New Heights as a Service Product Support Specialist! ️ Why WMH? Because Your Career Deserves More! At WMH (), we don’t just offer jobs—we build unstoppable careers. With over 35 years of industry excellence, we’ve grown into the Southeast’s fastest-growing material handling leader, with 11 locations across NC, SC, TN, VA, GA & AL—and we’re just getting started. We operate on honor, integrity, and a relentless drive for excellence. Your success is our mission, which is why we invest in training, mentorship, and leadership development to accelerate your career. What sets us apart? We’re not just another dealership—we’re redefining the industry as a full-scale solutions provider, delivering cutting-edge automation, fleet technology, and next-level innovation that keeps businesses moving forward. When you join WMH, you’re stepping into a future filled with opportunity, advancement, and impact—because here, your career moves forward. As a Service Product Support Specialist, your a detail-driven, customer-focused professional delivering expert technical support and service solutions for our forklift products. Your role is pivotal in ensuring customers receive top-tier service, helping them maintain, troubleshoot, and optimize their material handling equipment for peak performance. The ideal candidate is a technically skilled problem-solver with expertise in forklift systems, a passion for customer service, & a commitment to delivering exceptional solutions that keep industries moving.✨ Your Mission? To deliver unmatched excellence in both our products and services, ensuring our customers receive top-tier support and solutions. As a key player in our team, you’ll help maintain, optimize, and enhance material handling equipment, keeping industries moving efficiently. This role requires close collaboration with customers, service technicians, and internal teams to proactively diagnose, troubleshoot, and resolve service-related issues—all while upholding WMH’s high standards of performance and reliability. Key ResponsibilitiesCustomer & Technical Support✅ Deliver exceptional customer service to both internal and external clients with professionalism and efficiency. ✅ Act as the go-to expert for service-related inquiries, providing technical guidance to customers, service technicians, and internal teams. Service Coordination & Efficiency ️✅ Schedule & dispatch service technicians, optimizing workload management for timely and effective service delivery. ✅ Monitor & manage work in progress (WIP) to ensure service tasks stay on track and meet quality standards. ✅ Initiate, oversee, & close work orders with precision, maintaining accurate records and ensuring smooth operations. ✅ Continuously improve service efficiency, productivity, and quality, driving results within the Service Department. Operational & Administrative Support✅ Maintain detailed service documentation, including work orders, reports, and customer communications, ensuring compliance with policies. ✅ Support rental equipment contracts, shipping, and receiving coordination to streamline external and internal processes. ✅ Manage data entry, warranty claims, & fleet processing, ensuring timely and accurate resolution. ✅ Prepare & contribute to monthly departmental reports, fueling data-driven decisions. Collaboration & Industry Partnerships✅ Strengthen relationships with vendors & manufacturers, ensuring seamless communication and support. ✅ Support internal teams by fostering a collaborative and productive work environment. Growth & Continuous Improvement✅ Stay ahead by developing in-depth expertise in forklift products, technology, and industry best practices. ✅ Identify opportunities to enhance service processes, customer support, and product performance, driving company success. Join the Revolution: Our work environment is as diverse as our ambitions, from climate-controlled offices to bustling warehouses. Power Up: This job is active, demanding your presence - standing, walking, bending, kneeling, stooping, crouching. You'll lift and move items weighing over 50 lbs. Vision? You've got it - close, distant, color, peripheral, depth perception, and a knack for adjusting focus. ️️ Skills, Knowledge and Expertise ️️✔ Education – High School Diploma or GED required. ✔ Experience: 3-5 years in technical support or service within the material handling or forklift industry. (heavy equipment, agriculture, or automotive parts is a plus.) ✔ Technical Expertise: Deep understanding of forklift systems (electrical, hydraulic, and mechanical), with strong diagnostic and troubleshooting skills. ✔ Customer Focus: Proven ability to deliver outstanding service, build relationships, and communicate effectively with customers and internal teams with confidence and professionalism. ✔ Problem-Solving Mindset: Strong critical thinking and analytical skills to assess issues, adapt to challenges, and implement effective solutions. ✔ Organizational Skills: Ability to manage multiple service tasks, prioritize effectively, and maintain efficiency under pressure. ✔ Team Collaboration: Works well with technicians, parts specialists, sales teams, and vendors to ensure seamless operations. ✔ Tech-Savvy: Proficient in service management software, CRM systems, diagnostic tools, and Microsoft Office Suite. ✔Work Ethic & Drive: Self-motivated, results-oriented, and fueled by passion for excellence. ✔Attention to Detail – Precision is your superpower, ensuring accuracy and efficiency in every task. ✔Strong Communication – Exceptional verbal and written skills to build relationships and drive results. ✔Leadership & Coaching – The ability to guide, mentor, and elevate those around you. Perks of Being a WMH Team Member: Premium Health Coverage – We take care of you with top-tier medical, dental, and vision insurance. Exclusive Training & Career Growth – Gain cutting-edge technical skills through our in-house training programs. Competitive Pay + Performance Opportunities – Earn a strong compensation package with potential for incentives & bonuses determined by role, performance, & business demand. Your efforts are not just appreciated but tangibly rewarded! Paid Time Off & Holidays – Recharge and spend time with loved ones with generous PTO & paid holidays. Cell Phone Allowance – Stay connected with a monthly phone allowance for business needs. Retirement & Profit Sharing – Secure your future with a 401(k) plan & profit-sharing benefits. ⚖ Work-Life Balance – We understand that flexibility matters and offer schedules that help you thrive. Collaborative & Inclusive Team – Work with driven, like-minded professionals in an innovative, people-first environment. Ongoing Professional Development – We invest in your success with mentorship, leadership programs, and skill-building opportunities. Your Cue: Take the Wheel of Your Future! This isn’t just another job—it’s your chance to be part of a powerhouse team that’s revolutionizing the industry and redefining careers. At WMH, we don’t just keep businesses moving—we propel careers to new heights. Don’t wait. Don’t watch. Be part of something BIG, something BOLD, something that makes you excited to jump out of bed every morning! The future is calling—ignite yours today! Apply now.

Job Description Join our team at Atlantic Compressor Services! Working at Atlantic Compressor Services, a Bobcat industrial air compressor dealership, gives you the opportunity to be part of a local business creating innovative customer solutions, focused on driving customer satisfaction. We’d like to offer you: 1. The opportunity to grow in your career as the organization grows, 2. Comprehensive benefits package, 3. Competitive pay scale and 401K, 4. A fulfilling career where you can relate to and engage with an incredible team Job Purpose: The Parts Specialist delivers outstanding service to both internal and external customers. They are responsible for quoting, ordering, receiving, and returning parts for our service technicians, while also handling calls from customers, technicians, sales staff, and vendors. This role supports warehouse operations, including shipping, receiving, and general maintenance—and actively engages new and existing customers to promote parts and products. Responsibilities include parts identification, pricing, quoting, order processing, follow-up, expediting, and order management. The Parts Specialist works closely with the Sales and Service teams to ensure a smooth workflow and exceptional customer experience. Position Responsibilities: • Maintain strong organization and accurately track orders, communicate order status, and complete all paperwork and system entries related to ordering, transferring, returning, stocking, and selling parts., • Prepare and follow up on parts and service quotes to convert them into orders. Serve as a key customer contact and guide customers through the full sales cycle., • Manage the parts ordering process from start to finish, including adding parts to jobs and supporting job completion and invoicing., • Process incoming parts orders, enter orders into Field Servio, print packing lists for stock shipments, and generate invoices. Provide pricing and availability support for dealer partners., • Develop, sell, and convert accounts into recurring service contract customers., • Manage inventory and ensure appropriate stocking levels., • Handle customer returns, credit requests, and returns to the factory or dealership inventory., • Perform additional duties as assigned., • High school diploma., • 3–5 years of experience in inventory control and/or order expediting in a sales or service environment preferred., • Proficiency with Microsoft Office and CRM/job management systems., • Strong customer service and conflict-resolution skills., • Strong interpersonal and communication skills (written and verbal)., • Active listening and problem-solving abilities., • Ability to work independently and meet productivity goals., • High attention to detail and sound judgment., • Team-oriented with high energy and initiative., • Must occasionally lift or move up to 50 lbs., • Regularly required to stand, walk, use hands, reach, talk, and hear., • Occasionally required to sit, stoop, crawl, climb, or kneel., • Regular use of pallet jack and/or forklift required. Powered by JazzHR 4U0IkwBQ3G

Job Description Job Title: Operations Manager Locations: Atlanta, GA & Charlotte, NC (Onsite) Salary Range: $80,000 – $120,000 (Depending on Experience) Industry: Freight Forwarding / Warehousing / 3PL Position Overview: We are seeking an experienced and hands-on Operations Manager to lead daily warehousing and logistics operations in a fast-paced freight forwarding or 3PL environment. This role is critical in ensuring efficient workflow, warehouse organization, labor planning, and compliance across both inbound and outbound operations. The ideal candidate will have a strong background in warehouse and distribution management, with forklift certification (or ability to obtain one) and a strong understanding of OSHA and safety standards. Why Join Us? • Competitive compensation and benefits package, • Opportunity to lead operational improvements and make a lasting impact, • Fast-paced, collaborative environment with a focus on growth and excellence, • Stability in a growing logistics and supply chain company serving diverse clients #NowHiring #OperationsManager #LogisticsJobs #WarehouseManager #AtlantaJobs #CharlotteJobs #ForkliftCertified #FreightForwarding #3PL #LeadershipOpportunity Requirements Key Responsibilities: • Oversee day-to-day warehouse operations, ensuring productivity, safety, and service levels are consistently met, • Manage inbound and outbound freight operations, including LTL, FTL, container drayage, and last-mile deliveries, • Supervise warehouse staff across multiple shifts (hiring, scheduling, training, coaching, and performance reviews), • Ensure inventory accuracy, cycle counts, and WMS system usage is maintained effectively, • Lead warehouse layout planning, slotting, and lean efficiency improvements, • Monitor KPI metrics related to cost, throughput, accuracy, and labor productivity, • Collaborate with customer service, transportation, and sales teams to ensure client expectations are exceeded, • Enforce safety regulations and ensure all equipment, including forklifts, is maintained and used properly, • Manage vendor relationships (e.g., carriers, equipment providers) and negotiate as needed for service and pricing, • Assist with P&L management, cost control initiatives, and forecasting Qualifications: • 5–10 years of progressive experience in warehouse, logistics, or freight operations, • 3+ years in a leadership role managing warehouse staff and daily distribution operations, • Experience with forklift operations; forklift certification is a plus, • Familiarity with WMS, TMS, or ERP systems (AS400, CargoWise, Manhattan, SAP, or similar), • Knowledge of OSHA regulations, safety protocols, and warehouse best practices, • Strong problem-solving, organizational, and communication skills, • Ability to work in a dynamic, high-volume logistics setting Standard benefits with Medical, Dental, and Vision...

Job Description American Metals Supply is a growing metals distributor servicing the southeastern part of the USA with offices located in Tampa, FL. The company was formed by a highly experienced group of people with many years of exposure to the aluminum market. We have developed systems and controls to ensure that material requirements are met as agreed. We take pride in "doing what we say". We are professional, agile and our goal is to provide excellent service and quality at a fair price. We also strive to provide flexibility to meet our customers' needs. We work hard and continue our never-ending quest for improvement so that we can continue to grow our business & customer loyalty. Our company is seeking a Warehouse Shift Manager - 2nd Shift to help manage a shift within within our Charlotte, NC Distribution Center. The position plays a crucial role in overseeing daily warehouse operations, managing warehouse staff, and ensuring efficient and accurate handling of goods. They are responsible for maintaining inventory accuracy, optimizing workflow processes, and fostering a safe and productive work environment. Warehouse Manager Responsibilities: • Team Leadership: Supervise and lead warehouse staff, including assigning tasks, providing training, and conducting performance evaluations. Foster a positive work environment, promoting teamwork, accountability, and continuous improvement. Resolve conflicts and address employee concerns in a timely and professional manner., • Operational Management: Oversee the receiving, storage, and shipping of goods, ensuring compliance with company procedures and safety regulations. Coordinate with other departments to fulfill orders, resolve discrepancies, and meet customer expectations. Monitor inventory levels and conduct regular audits to maintain accuracy and prevent stock shortages or overages., • Process Optimization: Identify opportunities to improve warehouse efficiency and productivity, implementing changes as needed. Streamline workflow processes, such as picking, packing, and shipping, to minimize errors and reduce cycle times. Utilize warehouse management systems (WMS) and other technology tools to optimize inventory control and order fulfillment., • Quality Assurance: Ensure that goods are handled and stored in accordance with quality standards and regulatory requirements. Conduct quality inspections and implement measures to prevent product damage or loss. Address any quality issues or customer complaints promptly and effectively., • Safety Compliance: Promote a culture of safety awareness and ensure adherence to workplace safety policies and procedures. Conduct regular safety inspections and enforce compliance with occupational health and safety regulations. Provide training on safe equipment operation and proper handling techniques to minimize accidents and injuries., • Documentation and Reporting: Maintain accurate records of inventory levels, transactions, and warehouse activities. Generate reports on key performance indicators (KPIs), such as productivity, accuracy, and inventory turnover. Analyze data to identify trends, evaluate performance, and make data-driven decisions to improve operations., • Perform other duties as assigned. Warehouse Supervisor Requirements: • High school diploma or equivalent., • Previous experience in warehouse operations, with at least 2 years in a supervisory or leadership role., • Strong leadership and communication skills, with the ability to effectively motivate and develop a team., • Proficiency in warehouse management systems (WMS) and Microsoft Office applications., • Knowledge of inventory control principles, warehouse safety protocols, and regulatory requirements., • Ability to multitask, prioritize workload, and work efficiently in a fast-paced environment., • Attention to detail and problem-solving skills, with a focus on continuous improvement., • Forklift certification and/or other relevant certifications (desired). Warehouse Supervisor Benefits: • 401(k) & matching, • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance American Metals Supply is an equal employment opportunity employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. Drug-Free Workplace Monday-Friday 2:00PM - 10:30PM

Job Title: Machine Builder – Enclosure (Not licensed) Client: AVL Manufacturing Location: Charlotte, NC Schedule: 7AM TO 3:30PM Pay Rate: $27.88/hr OR $58,000/yr Position Summary: We are seeking a skilled and experienced Machine Builder – Enclosure (Mechanical Assembler) to join our manufacturing team. This role is responsible for the mechanical assembly of generator enclosures, piping, and heavy industrial components. The ideal candidate will have hands-on experience working in a heavy industrial environment, operating material handling equipment, and interpreting technical drawings. Key Responsibilities: • • Assemble and fit mechanical parts, enclosures, piping, and structural components, • • Read and interpret blueprints, diagrams, and specifications to guide assembly operations, • • Use forklifts, overhead cranes, and hoists to safely move heavy parts and materials, • • Install major components such as tanks, louvers, frames, generators, and panels, • • Use hand and power tools to complete complex assemblies and mechanical fits, • • Conduct inspections and testing to ensure parts and finished assemblies meet quality standards, • • Assist with on-site installation, service, and warranty work when required, • • Provide feedback to engineering and supervisors for continuous improvement, • • Follow all safety procedures and perform equipment inspections (cranes, lifts, etc.), • • Maintain a clean and organized work area, • • Train and mentor junior team members Qualifications: Required: • • Minimum 2 - 4 years of experience in heavy industrial mechanical assembly, • • Proficient in reading mechanical blueprints and interpreting technical documentation, • • Certified in forklift and overhead crane operation, • • Physically able to lift 50–75 lbs regularly and work in a high-traffic shop environment, • • Knowledge of material handling protocols and equipment, • • Strong mechanical aptitude and familiarity with industrial components and tools, • • Clear understanding of the Occupational Health and Safety Act and safe work practices Preferred: • • Experience in an ISO 9001-certified manufacturing environment, • • Background in genset assembly or large-scale industrial equipment • Service technician experience is a plus