Mechanical engineering jobs in McKinney, TexasCreate job alerts

We are looking for a reliable and experienced School Custodian to perform general cleaning duties in designated areas at a K-12 school, college or university campus environment. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ___ A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 92S, 92Y, LS, 3051, 3F1X1 • Clean and maintain assigned area, which may include classrooms, hallways, restrooms, locker rooms, office, and stairways, • Sweep, remove debris, clean spills, and mop floors in designated areas, • Regularly check trash receptacles, emptying as needed, in all designated areas, • Follow procedures for the use of chemical cleaners and power equipment in order to prevent damage to floors and fixtures, • Notify lead cleaner or manager concerning the need for minor or major repairs or additions to building operating systems, • Establish and maintain effective communication and working relationships with clients, co-workers, shift coordinators, supervisors, managers, etc., • Collect, consolidate, and separate recycling into proper receptacles, • Clean and dust desks, chairs, tables furniture, fixtures, doors, sills, floors, ceiling, and walls • Polish hard surfaces, e.g. woodwork, stainless steel surfaces, • Wipe and clean tabletops, chairs, and equipment in food areas, • Move cabinets, boxes, furniture, crates and equipment to clean areas, either manually or by using hand trucks, • Clean interior partition glass, windows, glass partitions, and mirrors using soapy water or other cleaners, sponges, and squeegees, • Sweep walks, rake leaves, cut grass, remove snow or perform other incidental seasonal tasks, • Maintain the cleanliness of restrooms (clean and polish as needed), • Comply with all safety, security, compliance, and quality standards and procedures established by the Company, Clients, and regulatory authorities Basic Qualifications: • Must be 18 years of age or older, • No experience required and on the job training provided., • No high school diploma, GED or college degree required. Preferred Qualifications: • Prior customer service experience, • One (1) year of prior similar work experience. About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit . ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ABM does not accept unsolicited resumes.

About the Role We are hiring MRB Liaison Design Engineers and Aerostructure Design Engineers for a leading aerospace engineering services program supporting large commercial aircraft platforms. This role is focused on aircraft structural design (exteriors / aerostructures) Location: Allen, TX OR Wichita, KS Experience: 5–15 years Key Focus Areas MRB / Non-Conformance Disposition: • Review and provide technical dispositions: use-as-is, rework, repair, scrap, • Work within FAA and OEM delegated authority requirements, • Strong understanding of aircraft repair methods and production processes Liaison Engineering: • Act as a bridge between Engineering, Manufacturing, Quality, and Suppliers, • Drive closure of non-conformances and production issues, • Manage cross-functional teams to resolve engineering and production challenges Documentation & Compliance: • Process ECR/ECOs, • Maintain compliance with regulatory standards (FAA, AS9100), • Maintain detailed records for audits and certification Must-Have Skills • Experience in Aerostructure / Aircraft Structural Design (Exteriors only), • MRB Disposition experience (Concessions, Tags, Quality Notifications), • Strong hands-on experience with CATIA (or similar CAD tools), • Liaison Engineering experience managing cross-functional teams, • Background in Mechanical / Aerospace / Aeronautical Engineering, • 5–15 years of aircraft experience (OEMs or major aerospace programs preferred) We are not considering profiles that are limited to MRB quality or manufacturing experience without design ownership for this role. Required Qualifications • Aircraft structures and repair design, • CAD tools (CATIA preferred; SolidWorks acceptable), • PLM / Engineering systems (e.g., DOORS, SAP – good to have), • Strong decision-making, communication, and problem-solving skills

Job DescriptionDescription: Do you want to work for a company that will make you feel appreciated and reward you for your contributions? Do you see yourself as someone that treats people with respect and humility and cares about working in a positive work environment? We are currently looking for a Project Manager to join our team. ACIS is a growing commercial mechanical services provider in the commercial and industrial HVAC industry with a strong client base in Texas. The primary function of a Project Manager is to plan, coordinate, execute, and maintain an effective field construction organization utilizing the necessary engineering, labor, equipment, materials, tools, subcontracted services, and other company resources to effectively perform the scope of contracted work within an allotted budget and time schedule. Responsibilities: · Review plans, specifications, submittals and other contract documents to create a job plan for the successful completion of assigned projects · Develop and track a project schedule. · Effective manpower planning for future projects, including direction of specialty subcontractors. · Establish project cost control centers for tracking of equipment, material, labor, subcontracts, and miscellaneous costs. · Procure and manage project subcontractors and equipment vendors. · Procurement of necessary equipment and materials. · Inspect the jobsite on a regular basis for contract compliance, workmanship, and safety. · Follow-up on any required warranty work and maintain contact with owner to insure customer satisfaction. · Manage large jobs with minimal supervision. · Control job cost, closely monitoring necessary tasks. · Estimate changes in scope of work. · Schedules and supervises all installation, fabrication and start-up labor on assigned projects. · Perform job cost reviews reporting status to management. · Assures that contractual obligation has been met and that all close-out documents are submitted. · Adhere to Safety Best Practices WE OFFER ACIS, Inc. offers comprehensive benefits including medical, dental, vision, and disability insurance. We also offer 401K with company match programs, paid vacation and holidays, company vehicles, cell phones, and equipment. We believe in fostering an environment of growth and providing on-the-job training and certifications. OUR VALUES Honesty - Humility – Passion – Excellence – Teamwork – GrowthPeople are what make ACIS, INC. a great place to work! We recognize that diverse teams make the strongest teams, and we encourage people of all backgrounds to apply. Learn more: Requirements: Requirements: · Knowledge of construction processes · Knowledge of HVAC systems, ductwork, piping, and controls · Excellent communication skills, both oral and written · Ability to read and interpret Construction Documents, Plans and Specifications · Excellent organization skills · Good computer skills including Microsoft Word, Excel, and Microsoft Project. · Effective communication skills (written and oral) · Must have supervisory skills to plan, direct, organize, and control the activities of others with limited supervision · Decisive individual with a strong mechanical aptitude · References provided upon request.

POSITION SUMMARY Responsible for performing directed research/ development and product testing of polymer-based mixtures and blends. This will include formulation and prototyping work using polymer processing equipment, polymer testing, and close collaboration with staff engineers, process engineers, customers, and suppliers. This position reports to the Director of Product Technology. *No relocation assistance for this role. Prefer Candidates from the Dallas, TX, and surrounding area. RESPONSIBILITIES • Prepare polymer formulations with laboratory equipment as directed by the supervisor., • Test laboratory scale samples and new production trial samples for physical and chemical properties, as directed by the supervisor., • Collect and record test data and observations and provide summaries and interpretation of work to the supervisor., • Collaborate with members from other departments for the commercial scale introduction of new products., • Evaluate new raw materials in product formulations, as directed., • Provide on-the-floor support of the manufacturing group for production scale trials of modified and new product formulations., • Provide support to Technical Engineers for customer technical service projects., • Test properties of products for customer specifications, as directed., • Evaluate competitive products, as directed., • Demonstrate precise and accurate laboratory skills to prepare and test polymer formulations., • Collect test data in an orderly fashion and provide written reports to the direct supervisor., • Produce internal project status reports for activities., • Detailed record keeping and general laboratory upkeep., • Provide technical training to Quality Control personnel for laboratory procedures., • Other duties as assigned. PREFERRED QUALIFICATIONS • Minimum of an Associate’s degree in a relevant field of chemistry, biology/biochemistry, physics, engineering, materials, polymer science, plastics processing, or chemical manufacturing, and at least two years of technical experience in chemical or plastics manufacturing., • Experience with laboratory equipment to measure properties of liquids or solids. Hands-on laboratory experience required with either analytical testing, physical testing, or quality control methods., • Experience with methods for Physical Testing, including methods such as spectroscopy, mechanical (Instron), or other analytical methods of material characterization., • Familiarity with standard test methods for materials (ASTM, ISO, and others)., • Experience with computer-based analysis of data, such as spreadsheet calculations. Experience with statistical analysis of data., • Specific experience with chemical blending, polymer compounding or alloying., • Background in manufacturing operations, shop-floor experience, or demonstrated capability to work with shop-floor personnel with manufacturing equipment., • Capability to understand machine operation and provide directions to operators., • Excellent written and verbal communication skills, • Excellent organizational and time management skills, • Proficiency in MS Office, • Accuracy and attention to detail, • Strong analytical and problem-solving skills

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Our Raytheon's Multi-spectral Targeting System (MTS) product line is seeking an Assembler specializing in manufacturing to support our team 100% onsite in McKinney, Texas. This position is for 1st shift. What You Will Do • Assemble, disassemble, re-assemble, fabricate, repair and/or inspection of electronic, electrical, and mechanical systems., • Set up and operate a variety of machines and hand instruments., • May route, dispatch and expedite flow of material., • Check for work correctness. Specific duties will include material preparation and the assembly and rework of electronic and mechanical assemblies., • Perform wire/cable preparation, installation, crimping, and torquing using hand instruments., • Perform all work in accordance with written work instructions to prescribed standards., • Work with production resources and teammates to meet production goals., • Perform repetitive tasks in accordance with an established, demonstrated process., • Perform in-process inspections in accordance with company standards and customer specifications., • Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/technical education in related discipline with a minimum of 4 years of relevant experience., • Experience in product assemblies and/or manufacturing., • Excellent hand/finger dexterity and extreme attention to detail, • Basic computer and math skills., • Experience with the use of common hand instruments (screwdrivers, sockets, ratchets, torque tools and analyzers, etc., • Experience with VM, CMES, SAP, or other manufacturing automation databases and tools Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Non-Eligible Relocation assistance not available The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Degree in Mechanical Engineering or equivalent military, trade school or hands-on experience.

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. Decima International is a professional services company that delivers project management and controls services in the U.S. and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. Its success is built on treating every client like a partner, hiring talented professionals, helping them grow, and expanding at a steady, high-quality pace. Decima offers long-term career opportunities where employees work with major clients on complex, high-profile projects, with plenty of room for professional growth. We are currently seeking a Senior Engineering Design Manager (Data Centers) to support multiple data center projects for a leading global technology client. This client-facing role requires strong communication, organization, and multidisciplinary design expertise across civil, structural, architectural (CSA), mechanical, electrical, ICT, security, and mission-critical systems, with the ability to manage several projects across multiple regions. Experience in hyperscale data centers, integrated design management, and mission-critical infrastructure is essential. This role includes mentoring team members, building lasting client relationships, acting as a liaison among multiple stakeholders, and supporting new business opportunities. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES Owner Advocacy & Oversight • Act as the owner's trusted design authority, ensuring all multidisciplinary designs meet program requirements, operational goals, and long-term reliability objectives., • Serve as the primary liaison between the owner and the external design team, ensuring client requirements, performance criteria, and operational needs are clearly communicated, interpreted, and incorporated into coordinated design solutions across all disciplines., • Review and approve consultant design packages (concept, SD, DD, IFP, IFC) across CSA, MEP, ICT, and Security disciplines., • Provide critical evaluation of proposed solutions, identifying gaps, risks, interdisciplinary inconsistencies, constructability issues, or value-engineering opportunities that protect the owner's interests., • Provide technical leadership and strategic oversight across all data center design disciplines, ensuring systems are resilient, efficient, scalable, secure, and maintainable., • CSA (Civil, Structural, Architectural) Oversight, • Oversee civil, structural, and architectural design elements, including:, • Site development, grading, utilities, and drainage, • Structural systems and building envelopes, • Architectural layouts, space planning, and constructability, • Life-safety, fire separation, and code compliance coordination, • Validate design assumptions, calculations, and interdisciplinary coordination., • Mechanical Systems Oversight, • Oversee key mechanical systems, including:, • Data center cooling (CRAH/CRAC, chilled water, DX, evaporative cooling), • Hydronics and fluid distribution, • Heat rejection systems, • Airflow management, pressurization, and containment strategies, • Smoke exhaust and other life-safety systems, • Review and validate CFD (Computational Fluid Dynamics) models to ensure efficient airflow, thermal performance, and operational reliability., • Validate mechanical design calculations, equipment selections, and modeling outputs., • Electrical Systems Oversight, • Evaluate and guide the development of electrical power systems, including:, • Medium-voltage and low-voltage distribution, • UPS systems and battery/energy-storage technologies, • Generators, switchgear, and paralleling gear, • Protective relaying, grounding, and bonding, • Emergency power, lighting, and controls, • Review load studies, short-circuit analyses, arc flash studies, and selective coordination plans., • ICT & Security Systems Oversight, • Oversee ICT and security system designs, including:, • Structured cabling and pathways, • Network rooms and data halls integration, • Physical security systems (access control, CCTV, monitoring systems), • Integration with building management and operational systems, • Drive the design review and governance process, ensuring alignment with codes, standards, and the owner's design basis., • Coordinate interdisciplinary design integration across CSA, MEP, ICT, Security, controls, and other engineering disciplines., • Manage design budgets, forecasts, and cost controls using ERP systems, ensuring alignment with program financial objectives., • Manage specifications, technical standards, and consultant submittals to ensure consistency and compliance., • Lead and manage value engineering initiatives to optimize cost, performance, and constructability without compromising reliability or client requirements., • Oversee BIM coordination, clash detection, and model reviews using Revit and Navisworks to ensure fully coordinated, construction-ready designs., • Ensure all design deliverables are complete, coordinated, and construction-ready., • Provide design-intent interpretation during construction and ensure contractors' work aligns with approved drawings, specifications, and client requirements., • Manage and review RFIs, submittals, and field issues to ensure alignment with design intent and contractual obligations., • Multidisciplinary Change Order Evaluation, • Evaluate all design-related change order requests across CSA, Mechanical, Electrical, ICT, and Security disciplines, including:, • Determining root cause (design development, unforeseen conditions, scope gaps, or contractor means/methods), • Assessing technical and commercial validity, • Identifying alternate solutions or mitigation strategies, • Leading technical negotiations to minimize unnecessary change costs, • Ensuring documentation is compliant, justified, and properly approved, • Work closely with program management, operations, construction, finance, and external designers to ensure design solutions meet functional, operational, and business objectives., • Communicate design decisions, risks, and recommendations clearly and effectively to leadership and external stakeholders. QUALIFICATIONS Required Qualifications: • 15+ years of design experience in data centers or mission-critical environments across CSA, MEP, ICT, and Security disciplines., • 5+ years as an owner's representative, design manager, or consulting lead managing multidisciplinary design teams., • Bachelor's degree in Engineering, Architecture, Construction Management, or a related discipline., • ⁠Extensive experience with hyperscale data center programs., • Strong understanding of applicable codes and standards, including:, • ASHRAE, NFPA, Uptime Institute, • NEC, NFPA 70/70E, IEEE standards, • International Building Code (IBC) and local jurisdictional requirements, • Proven ability to manage external design firms, control budgets, and hold partners accountable for performance., • Demonstrated experience with BIM coordination, clash detection, and model review processes., • ⁠Master's degree in Engineering, Architecture, or a related field. POSITION DETAILS: • Location: Remote Position (US-based), • Position: Senior Engineering Design Manager, • Position Classification: Salary-based full-time hours, • Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: • Microsoft Office, • Microsoft 365, • Autodesk Revit, • Autodesk Navisworks, • AutoCAD, • ERP systems for budget and cost management Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. We are looking for a driven and capable Data Analyst – Telemetry & Operations (Critical Infrastructure | Data Center Operations) to support our clients by analyzing operational and telemetry data across critical infrastructure environments, enabling informed decision-making and improved operational performance. You will play an integral role in analyzing real-time and historical operational data, validating telemetry signals, supporting incident investigations, and producing clear, evidence-based insights that assist clients, vendors, and project teams in managing risk, performance, and reliability. We are looking to bring in dedicated individuals with strong analytical skills and a passion for operational data who thrive in fast-paced, incident-driven environments. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world together. RESPONSIBILITIES: Telemetry & Incident Data Analysis Operational Data Analysis: • Analyze real-time telemetry alerts and operational datasets to validate incidents, identify anomalies, and assess operational impact., • Differentiate true events from false positives, duplicate alerts, and known recurring conditions., • Correlate trends, timestamps, logs, and event data to support severity assessment and operational decision-making., • Provide analytical context and data-driven insights to clients and external vendors during incident investigations., • Track remediation actions, response timelines, and outcomes using structured operational data., • Identify recurring incident patterns, systemic operational risks, and vendor performance trends., • Highlight gaps in telemetry coverage, data quality, alert logic, or monitoring effectiveness., • Recommend opportunities for alert tuning, automation, and improved monitoring or reporting practices., • Maintain accurate, auditable records of analyses, incidents, and findings in approved client and company tools., • Contribute analytical insights to improve runbooks, alert definitions, and operational standards. Required Qualifications: • Bachelor's degree in Data Analytics, Data Science, Computer Science, Engineering (Electrical, Mechanical, Computer, Network), Information Systems, Information Technology, or a related technical field., • 10+ years of experience in a data analyst, operations analyst, or telemetry/monitoring-focused role., • Hands-on experience working with time-series data, logs, alerts, or event-driven datasets., • Strong analytical skills with the ability to interpret noisy, incomplete, or real-time data., • Excellent documentation, written, and verbal communication skills., • Ability to operate independently in fast-paced, incident-driven environments., • Experience supporting data centers, infrastructure operations, NOC/SOC environments, or other critical systems., • Familiarity with incident management, problem management, or operational analytics practices., • Exposure to telemetry, observability, or monitoring platforms., • Understanding of root cause analysis concepts and service management frameworks (e.g., ITIL). POSITION DETAILS: • Location: Remote Position (US-based), • Position: Data Analyst – Telemetry & Operations, • Position Classification: Salary-based full-time hours, • Microsoft Office, • Microsoft 365 Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima International is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a seasoned and strategic Director, Construction and Quality Management, to oversee and integrate both construction execution and quality management across multiple large-scale data center projects for top global technology clients. This leadership role will manage a team of Quality Supervisors and Construction Managers working across different states, ensuring consistency, compliance, and excellence in all phases of construction delivery. Based primarily out of our Allen, Texas office, this position requires frequent, ad-hoc travel to project sites across the US. The Director will serve as a key leader in driving construction efficiency, enforcing quality standards, mentoring diverse teams, and maintaining strong client relationships. This role demands strategic thinking, operational leadership, and deep expertise in both construction and quality management practices. We are seeking candidates who are visionary, detail-oriented, and capable of balancing long-term strategic goals with daily execution. Join us and help build the infrastructure that powers the digital economy. RESPONSIBILITIES • Provide strategic leadership and oversight of both construction execution and quality management programs across multiple data center projects., • Manage, mentor, and develop teams of Construction Managers and Quality Supervisors located across various project sites., • Establish and enforce construction and quality procedures, ensuring alignment with industry standards, regulatory requirements, and client objectives., • Serve as the primary executive liaison for clients on construction and quality matters, delivering regular updates and fostering trusted partnerships., • Oversee project site audits, inspections, and performance reviews to ensure adherence to schedules, budgets, and quality standards., • Drive integration across construction, engineering, commissioning, and safety functions, proactively identifying risks and implementing mitigation strategies., • Review and approve construction execution plans, RFIs, submittals, method statements, and quality documentation., • Develop KPIs and reporting systems to track progress, identify gaps, and communicate performance across executive and client stakeholders., • Lead lessons-learned programs and continuous improvement initiatives across the construction and quality functions., • Support contract development, bid evaluations, and contractor prequalification processes, ensuring strong construction and quality criteria., • Represent the company in client meetings, executive briefings, and industry forums related to construction and quality management. Required qualifications: • 22+ years of progressive experience in construction management and quality assurance/quality control, with leadership in mission-critical environments., • Proven track record directing multi-disciplinary teams (construction, quality, engineering) on large-scale data center or high-tech infrastructure projects., • Deep understanding of construction processes across civil, structural, mechanical, and electrical disciplines., • Experience establishing and implementing QA/QC systems, inspection and test plans (ITPs), and quality frameworks., • Bachelor's degree in Construction Management, Engineering, or related field (or equivalent experience)., • Strong knowledge of ISO 9001 principles and other applicable standards (ASHRAE, IEEE, IBC, etc.)., • Exceptional leadership, communication, and organizational skills with the ability to influence executive stakeholders., • Demonstrated success in overseeing contractor performance, construction execution, and compliance with quality standards., • Strong financial and contractual understanding to align construction execution with project objectives., • Master's in Construction Management, Engineering, or related fields., • Certified Construction Manager (CCM), Project Management Professional (PMP), or Certified Quality Auditor (CQA)., • Significant experience with data center design and construction environments., • Familiarity with Lean Construction, Six Sigma, or continuous improvement methodologies., • Primary Location: Allen, Texas, with frequent travel required to multiple project sites across the US, • Position: Director, Construction and Quality Management, • Position Classification: Salary-based full-time hours, • Microsoft Office, • Microsoft 365, • Microsoft Project, • Bluebeam, • Procore or similar construction management platforms Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Description Camelot Services, Inc. is an established leader in the Facility Management and Maintenance Industry servicing corporate owners and users of real estate. Camelot services Fortune 500 clients as well as emerging businesses and supports clients’ properties across the United States and Canada. Apply today and join the Camelot Team! Camelot is looking for a Building Engineer to add to our team! Shift: All Shifts ESSENTIAL JOB DUTIES • Responsible for preventive maintenance, necessary maintenance, and repairs to the buildings mechanical, electrical, HVAC and plumbing systems. Must be familiar with the location and have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, fire protection and security systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary., • Conducts periodic general preventive maintenance on mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts, and periodic testing of equipment. Systems include, but not limited to; air handling units (including both rooftop and built-up units), re-circulating air systems, water pumping systems, cooling plant and plumbing system components. Also conducts general building maintenance, as needed., • Be responsive to tenant requests in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., • Prepare and maintain maintenance logs and records. Familiarity with preventative maintenance and work order software systems., • Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor. Maintains log of work order details., • Perform all assigned work so as to ensure the safety of the building’s tenants and the continuous operation of the site., • Be familiar with and conform to all written operating procedures associated with site., • Assist in snow and ice clearing operations, including the coordination of plowing and salting activities by outside vendors. If applicable, • Strong knowledge of Building Automation Systems / Programming., • Interface and work with others throughout the company., • Proficiently using test equipment and devices pertinent to building operating systems and analyzing test results., • High School Diploma required, • Journeyman Electrician License preferred, • Minimum of 5 plus years previous building operations engineering experience., • Working knowledge of HVAC, Electrical, and Plumbing systems., • A solid safety record in past work history and training in safe work practices, • Ability to handle multiple projects and make decisions., • General computer knowledge and skills such as Microsoft Office and CMMS systems., • Holds any necessary / required licenses, CFC certification is desired., • Must be able to climb / stand on ladders while performing repairs or using various tools, • Must be able to bend at the knees / practice safe lifting standards often throughout the day, • Must typically need to be able to lift up to 75 lbs independently Company DescriptionCamelot Services, Inc. incorporated in 2000 for the purpose of providing high quality, professional, property and facilities management to clients who want customized, cost-effective service. Headquartered in Plano, TX, Camelot has representation across the nation and has provided consultation services on an International level. Camelot Services, Inc. is an equal employment opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, national origin, marital status, disability, sexual orientation, protected military/veteran status, or any other protected factor.Camelot Services, Inc. incorporated in 2000 for the purpose of providing high quality, professional, property and facilities management to clients who want customized, cost-effective service. Headquartered in Plano, TX, Camelot has representation across the nation and has provided consultation services on an International level.\r\n\r\nCamelot Services, Inc. is an equal employment opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, national origin, marital status, disability, sexual orientation, protected military/veteran status, or any other protected factor.

Job Description Onsite: Travel: 25% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! As a mechanical designer with Maverick Power you will be working with our engineering and manufacturing teams to design and produce power distribution and control systems for industry leading customers all over the world. Your work will be exciting and varied working on projects which require knowledge of applications, electrical/electronics, mechanical, manufacturing, quality and safety. Never a dull day, and always a challenging problem to solve in a collaborative, goal focused environment. Key Responsibilities: • Work with the development to design and build electrical distribution equipment, • Mechanical design for low and medium voltage switchgear, switchboards, panel boards, and control panels., • Evaluate drawings and specifications to develop designs that meet customer requirements., • Design electrical enclosures meeting applicable UL, ANSI, IEEE, etc. safety standards., • Create bills of materials, specify parts, work with internal and external manufacturing., • Determine deliverable due dates and hold to the schedule., • Build prototypes, • Research and find new components and vendors, • Lead interaction with other functions and locations to determine optimum product/process solutions., • Check other team member's drawings, • Bachelor's Degree in Mechanical Engineering or Mechanical Technology & minimal mechanical design experience OR Associates Degree & minimum of 5 years of mechanical design experience, • Minimum of 1 year experience with 3D CAD, SolidWorks is preferred., • Solidworks CSWA/P/E certifications are desirable., • Experience building and fabricating electrical and electronics enclosures., • Must be able to lift up to 50 pounds at a time., • Must be able to navigate the warehouse and reach items both high and low., • Prolonged periods sitting, standing, walking, and performing repetitive tasks., • Must be able to navigate the warehouse and reach items both high and low., • Prolonged periods standing on the manufacturing floor and sitting at a desk and working on a computer., • Must have vision correctable to 20/20 and be able to wear required PPE (hard hat, safety glasses, boots, gloves, etc.). EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Onsite: Travel: 10% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! We are seeking a highly detail-oriented Mechanical Drawing Checker with expertise in SOLIDWORKS to support our engineering team. This role will be responsible for reviewing part and assembly drawings against established company standards and checklists to ensure accuracy, completeness, and manufacturability prior to release. You will play a critical role in design and drawing quality control by identifying discrepancies, marking redlines, validating Bills of Materials (BOMs), and ensuring proper ERP alignment. You will work closely with engineers and ERP team members. Key Responsibilities: • Review part drawings and assembly drawings for accuracy, completeness, and compliance with company drafting standards., • Compare drawings based on ASME Y14.5 and Y14.100 standards, as well as an internally defined checklist., • Redline drawings clearly and accurately to communicate required corrections or improvements to engineers or mechanical designers., • Verify dimensions, tolerances, callouts, materials, hardware, and revision levels., • Cross-check Bills of Materials (BOMs) for accuracy, structure, and alignment with drawings., • Ensure part numbers, descriptions, and revisions are correctly entered and maintained within the ERP system., • Validate that drawing packages are complete before release to manufacturing., • Support continuous improvement of drawing standards and checking procedures., • Minimum of 5 years of experience in drafting, drawing review, manufacturing documentation, or related technical role., • Minimum of 5 years of experience in BOM management in ERP experience in Epicor., • Associate degree in Mechanical Engineering, Drafting & Design, or a related field., • Proficiency in SOLIDWORKS (drawings, sheet metal, weldments, Design Checker)., • Proficiency in SOLIDWORKS PDM Vault Management., • Proficiency in MSOffice., • Experience managing and validating Bills of Materials (BOMs)., • Strong understanding of mechanical drawings, GD&T fundamentals, and drafting standards., • Working knowledge of Epicor and part/revision control processes., • Strong organizational skills and ability to manage multiple tasks at once., • Must be able to lift up to 25 pounds at a time., • Prolonged periods standing on the manufacturing floor and sitting at a desk and working on a computer. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. Decima International is a professional services company that delivers project management and controls services in the U.S. and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. Its success is built on treating every client like a partner, hiring talented professionals, helping them grow, and expanding at a steady, high-quality pace. Decima offers long-term career opportunities where employees work with major clients on complex, high-profile projects, with plenty of room for professional growth. We are looking for a driven and capable Design Project Manager to support the development of hyperscale data center projects. This role is unique: you will act as the owner representative managing the end-to-end design process. The ideal candidate possesses a deep engineering background combined with the project management rigor of a PMP to ensure that complex data center designs are executed flawlessly in the field. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES • Design Governance: Direct the end-to-end design process from concept through "Issued for Construction" (IFC) documents, ensuring all deliverables align with the master project schedule and budget"., • Design Coordination: Lead the integration between CSA (Civil, Structural, Architectural), MEP, ICT, and Security disciplines, to ensure 100% design integration and zero spatial conflicts., • Procurement Support: Assist in the technical review of long-lead equipment submittals to ensure structural and architectural readiness for heavy-load installations., • Stakeholder Management: Serve as the primary liaison between the owner, the Architect of Record (AOR), and the General Contractor. You will lead design review meetings and present technical progress to executive leadership., • Stakeholder Communication: Prepare and present technical status reports and PowerPoint decks to both client leadership and site-level management., • Technical Compliance: Ensure all site-level design changes (Field Changes) comply with owner standards, local building codes, and data center mission-critical requirements., • RFI & Submittal Management: Manage and expedite the technical review of RFIs and submittals, coordinating with consultants and subcontractors to prevent construction bottlenecks., • Risk Mitigation: Identify potential design-related risks and lead cross-functional teams to develop rapid, cost-effective engineering solutions., • BIM Coordination: Utilize Revit/Navisworks for real-time clash detection and resolution., • Value Engineering (VE) Leadership: Proactively lead Value Engineering workshops to identify opportunities for cost optimization and schedule acceleration without compromising "Mission Critical" performance or structural integrity. Evaluate alternative materials and construction methods to drive maximum ROI for the client., • Project Closeout: Oversee the implementation of the Quality Management System (QMS) as it relates to design accuracy, local building codes, and "Mission Critical" performance standards, and support the commissioning (Cx) teams during final hand-over". QUALIFICATIONS Required Qualifications: • 15+ years of professional experience in engineering design and construction oversight., • Bachelor's degree in Civil, Structural, or Architectural Engineering., • Project Management Professional (PMP) certification is highly preferred or required., • Strong background in data center development, or similar mission-critical/industrial environments (e.g., power plants, hospitals, semiconductor labs)., • Proven ability to coordinate between multidisciplinary discipline (Electrical, Mechanical, Fire Protection,...) in a high-pressure construction environment., • Expert-level proficiency in reading and interpreting structural drawings, site plans, and specifications., • Mastery of Microsoft Office (Excel, PowerPoint) and experience with construction software like Procore, CxAlloy, or Bluebeam., • ⁠Direct experience with AWS, Google, Microsoft, Revit/Navisworks data center design standards., • Experience in Design-Build project delivery models., • Lean Six Sigma or LEED AP certifications. POSITION DETAILS: • Location: Remote Position (US-based), • Position: Design Project Manager, • Position Classification: Salary-based full-time hours, • Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: • Microsoft Office, • Microsoft 365, • Autodesk Revit, • Autodesk Navisworks, • AutoCAD, • ERP systems for budget and cost management Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Description Hybrid: Travel: 20% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! We are seeking a talented and motivated Compliance Engineer to be responsible for ensuring that products, systems, and processes meet all applicable regulatory, safety, and industry standards. This role works cross-functionally with engineering, operations, quality, and legal teams to integrate compliance requirements into product design and business processes. The Compliance Engineer proactively identifies regulatory risks, supports certification efforts, and maintains documentation to demonstrate ongoing compliance. This role requires a strong foundation in electrical engineering principles, hands-on experience with LV/MV systems, and a passion for research and innovation. Key Responsibilities: • Standards and Compliance: Ensure all designs and processes adhere to safety, environmental, and regulatory standards, including ANSI, UL, IEC, NEC, NEMA, and OSHA requirements., • Lead product certification and regulatory approval processes with external agencies and testing laboratories. Be the designated point of contact for UL and all other regulatory agencies., • Provide compliance training and guidance to engineering and cross-functional teams., • Documentation: Develop and maintain compliance documentation and technical files. Prepare technical reports, design specifications, test plans and documentation to support product development, regulatory approvals, and intellectual property filings., • Design and Development: Design, simulate, and develop electrical systems and components for low voltage (up to 1kV) and medium voltage (1kV–38kV) applications, ensuring compliance with industry standards (e.g., IEEE, IEC, UL)., • Prototyping and Testing: Build and test prototypes of power distribution systems, such as transformers, switchgear, circuit breakers, and control systems, to validate system performance, safety, and reliability., • Research and Innovation: Conduct research to explore new technologies, materials, and methodologies to improve efficiency, safety, and sustainability of LV/MV power systems., • Collaboration: Work closely with cross-functional teams, including mechanical engineers, software engineers, and product managers, to integrate electrical systems into broader product designs., • Bachelor’s degree in electrical engineering (Master’s degree is preferred)., • Minimum of 5 years of experience in R&D, regulatory compliance or design of low voltage and/or medium voltage power systems., • Proven track record in designing and testing electrical components such as transformers, switchgear, or power distribution systems., • Experience with power electronics, protection systems, and control systems is a plus., • Demonstrated ability and knowledge of applicable standards and certification processes., • Strong documentation and technical writing skills., • Ability to interpret technical regulations and translate them into engineering requirements., • Strong analytical and problem-solving skills., • Strong understanding of power system components, including circuit breakers, relays, and busbars., • Familiarity with industry standards (e.g., IEEE, IEC, UL, NEC)., • Knowledge of CAD tools (e.g., AutoCAD Electrical, SolidWorks Electrical) for schematic and layout design., • Strong communication and teamwork abilities., • Highly organized with the ability to manage multiple projects and meet deadlines in a fast-paced environment., • Detail oriented, • Cross-functional collaboration, • Experience with LV/MV power distribution equipment and related standards., • Familiarity with smart grid technologies or IoT applications in power systems.Experience working with third-party certification bodies and testing labs., • Must be able to lift up to 25 pounds at time., • Prolonged periods sitting at a desk and working on a computer., • Must be able to navigate the warehouse and reach items both high and low. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionAs a Commercial Control Technician, you will be essential in installing, configuring, and commissioning Building Management Systems (BMS) for new construction projects, including schools, churches, and commercial facilities. This hands-on field role requires expertise in DDC controls, wiring, system integration, and platform setup. You’ll collaborate closely with Project Managers and Engineers to ensure high-quality installations are completed on schedule, while also supporting programming and system calibration on platforms such as Tridium Niagara, ABB/Cylon, Distech, Honeywell, and Johnson Controls. Must have a consistent work history. Key Responsibilities • Work under the guidance of the Operations Manager to support your professional growth and success., • Travel to active job sites, primarily for new construction projects. Cover all of Texas and Oklahoma—from Oklahoma City (north) through San Antonio (south), east to west from El Paso to Louisiana, • Visit 1-2 sites daily—schools, churches, commercial buildings—starting from home each morning., • Install, troubleshoot, and optimize control systems in various buildings, including schools, churches, and commercial facilities., • Collaborate with field teams, electricians, and project managers to ensure seamless project execution., • Represent QBS with professionalism and demonstrate exceptional technical expertise. Qualifications and Skills • 2+ years hands-on DDC/BAS troubleshooting, programming, and service, • Proficient in ladder-logic / PLC-type programming, • Experience with platforms like ABB/Cylon, Distech, Honeywell, Johnson Controls., • Understanding of mechanical system sequences and controls, • Quick learner for new systems and interfaces, • Valid driver’s license, insurable record, and willingness to relocate if needed Tools/Support/Benefits: • Take-home company truck + gas card, • Company-issued credit card for tools and supplies (Lowe’s, Home Depot, HVAC vendors), • Phone and laptop provided, • Medical, 401K matching,, • Paid time off – 7 holidays + 2 weeks' vacation from day one. Schedule • 1st Shift, Monday-Friday, 8am-4:30pm, 30 min lunch, Possible OT About Us: At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000, our company’s purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Electrical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, the ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Electrical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES • Understand the project scope and requirements., • Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines., • Review and verify material submittals for A/E and Client approval., • Confirm delivered materials match approved submittals., • Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly., • Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion., • Conduct internal quality audits and site inspections., • Adhere to Quality, Health, Safety, & Environment (HSE) standards., • Provide technical support to address operational challenges and client concerns., • Plan and inspect Definable Features of Work (DFWs)., • Develop and implement Audit and Test Plans for quality inspections and testing., • Maintain and update Quality manuals, checklists, and forms., • Collaborate with third-party QA/QC firms as needed., • Participate in Quality Management System (QMS) audits., • Build relationships with project partners, consulting engineering firms, public agencies, and clients., • Ensure document control compliance and maintain project submittal logs and quality control reports., • Verify and document material compliance with approved submittals., • Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties., • Investigate and address non-conformance issues promptly., • Ensure calibration of inspection, measurement, and test equipment., • Liaise with the General Contractor, Client, and Project Management team to resolve quality issues., • Prepare presentations on progress, findings, and recommendations for management., • Review subcontractors' submittals for compliance., • Coordinate and monitor subcontractors, suppliers, direct labor, and materials., • Collaborate with public utility suppliers for final service connections., • Coordinate activities of inspection agencies., • Achieve required MEPS and electromechanical inspections., • Assist in preparing periodic QA/inspection progress reports., • Review and approve subcontractor work percentages., • Oversee commissioning processes. Required Qualifications: • 15+ years of construction and quality management experience., • Bachelor's degree in mechanical, electrical engineering, or a related field., • Experience with managing field engineering, inspection, and NDE related to all QA/QC functions., • Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects., • Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis., • Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded., • Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor., • Technical knowledge of materials and construction concepts., • Experience working as an Electrical Quality Supervisor for large commercial, industrial, or mission-critical facilities construction projects., • An excellent understanding of construction Quality Management Systems (QMS)., • Familiarity with punch list procedures and project closeout processes., • Strong attention to detail and excellent analytical skills., • Project Management Professional (PMP) certification., • Construction Quality Manager Certification (CCQM), • US Army Corps of Engineers (USACE), • Certified Quality Auditor (CQA), • Member of the American Society for Quality, • Six Sigma Certifications, • ISO 9001, • Green Business Certification (LEED), • Strong background in data center development and construction POSITION DETAILS: • Primary Locations (On-site):, • Dallas, Texas, • Abernathy, Texas, • Oklaunion, Texas, • Frederick, Maryland, • Shippingport, Pennsylvania, • Phoenix, Arizona, • Conesville, Ohio, • Portland, Oregon, • Salt Lake City, Utah, • Chicago, Illinois, • Position: Electrical QA Inspector, • Position Classification: Salary-based full-time hours, • Microsoft Office, • Microsoft 365, • CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Description Hybrid: Travel: 20% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! We are seeking an experienced Senior Mechanical Design Engineer to lead the mechanical specification, design, and integration of modular power solutions for mission-critical facilities. This role owns the end-to-end mechanical scope for E-Houses (modular electrical buildings), Power Distribution Centers (PDCs), and medium-voltage/low-voltage (MV/LV) skids supporting data center power trains and related industrial applications. Key Responsibilities: • Own the complete mechanical design lifecycle: requirements capture, concept development, detailed design, fabrication support, and field integration., • Develop equipment layouts and general arrangements (2D/3D) with clearances for installation, operation, maintenance, and safe egress., • Engineer structural bases and skid features including baseframes, lifting/rigging points, transport restraints, and interface points for anchoring and alignment., • Develop foundation interface requirements and installation recommendations for skidded solutions, including anchoring/hold-down details (anchor bolt patterns, shear transfer, leveling/grouting considerations, and installation tolerances) in coordination with civil/structural design teams., • Coordinate mechanical packaging to support repeatable modular fabrication (DFM/DFA), shipping constraints, and field install efficiency., • Perform heat-load assessments and develop HVAC/ventilation designs for electrical rooms, UPS rooms, and battery/energy storage spaces., • Select, size, and integrate HVAC equipment (packaged units, split systems, CRAC-style equipment where applicable) including airflow distribution, filtration, and moisture control., • Create layouts for ducting, louvers, dampers, intake/exhaust paths, and service clearances; coordinate control points and interlocks with controls engineering., • Integrate fire and life safety features into modular electrical buildings and skids, including detection, alarm interfaces, and emergency shutdown/ventilation control logic., • Coordinate fire suppression system requirements (clean agent and/or water-based solutions as applicable) with enclosure integrity, ventilation shutdown, and post-event purge concepts., • Bachelor’s degree in Mechanical Engineering (or equivalent combination of education and experience)., • Minimum of 8 years of mechanical design experience with modular power systems, industrial buildings, or skid-mounted equipment., • Experience and understanding of foundation requirements/recommendations and anchoring details for skid-mounted solutions, including providing load data, anchor bolt plans/patterns, and installation/leveling guidance for EPC/civil execution., • Demonstrated experience owning mechanical scope for at least two of the following: E-Houses/modular electrical buildings, PDCs, MV/LV skids, UPS plants, or data center power modules., • Working knowledge of HVAC/ventilation design for equipment rooms (heat loads, airflow management, equipment selection, integration constraints)., • Experience coordinating fire detection/suppression interfaces and life-safety-related mechanical features in enclosed industrial or mission-critical environments., • Professional Engineer (PE) license (or active path toward licensure)., • Direct experience with data center modular power platforms (repeatable product lines) and uptime-driven redundancy philosophies., • Experience with BESS/containerized energy storage systems, including coordination with compliance testing, certification, or AHJ acceptance workflows., • Familiarity with applicable energy storage safety and listing standards (e.g., NFPA 855 and UL 9540/9540A) and how they influence mechanical design decisions., • Must be able to lift up to 50 pounds at a time., • Prolonged periods sitting at a desk and working on a computer. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Electrical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, the ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Electrical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES • Understand the project scope and requirements., • Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines., • Review and verify material submittals for A/E and Client approval., • Confirm delivered materials match approved submittals., • Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly., • Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion., • Conduct internal quality audits and site inspections., • Adhere to Quality, Health, Safety, & Environment (HSE) standards., • Provide technical support to address operational challenges and client concerns., • Plan and inspect Definable Features of Work (DFWs)., • Develop and implement Audit and Test Plans for quality inspections and testing., • Maintain and update Quality manuals, checklists, and forms., • Collaborate with third-party QA/QC firms as needed., • Participate in Quality Management System (QMS) audits., • Build relationships with project partners, consulting engineering firms, public agencies, and clients., • Ensure document control compliance and maintain project submittal logs and quality control reports., • Verify and document material compliance with approved submittals., • Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties., • Investigate and address non-conformance issues promptly., • Ensure calibration of inspection, measurement, and test equipment., • Liaise with the General Contractor, Client, and Project Management team to resolve quality issues., • Prepare presentations on progress, findings, and recommendations for management., • Review subcontractors' submittals for compliance., • Coordinate and monitor subcontractors, suppliers, direct labor, and materials., • Collaborate with public utility suppliers for final service connections., • Coordinate activities of inspection agencies., • Achieve required MEPS and electromechanical inspections., • Assist in preparing periodic QA/inspection progress reports., • Review and approve subcontractor work percentages., • Oversee commissioning processes. Required Qualifications: • 15+ years of construction and quality management experience., • Bachelor's degree in mechanical, electrical engineering, or a related field., • Experience with managing field engineering, inspection, and NDE related to all QA/QC functions., • Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects., • Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis., • Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded., • Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor., • Technical knowledge of materials and construction concepts., • Experience working as an Electrical Quality Supervisor for large commercial, industrial, or mission-critical facilities construction projects., • An excellent understanding of construction Quality Management Systems (QMS)., • Familiarity with punch list procedures and project closeout processes., • Strong attention to detail and excellent analytical skills., • Project Management Professional (PMP) certification., • Construction Quality Manager Certification (CCQM), • US Army Corps of Engineers (USACE), • Certified Quality Auditor (CQA), • Member of the American Society for Quality, • Six Sigma Certifications, • ISO 9001, • Green Business Certification (LEED), • Primary Locations (On-site):, • Conesville, Ohio, • Frederick, Maryland, • Indianapolis, Indiana, • Frankfort, Kentucky, • Lansing, Michigan, • Dover, Delaware, • Shippingport, Pennsylvania, • Charleston, West Virginia, • Position: Electrical QA Inspector, • Position Classification: Salary-based full-time hours, • Microsoft Office, • Microsoft 365, • CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Description Hybrid: Travel: 20% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! The Electrical Engineer designs and integrates electrical power distribution systems for modular solutions serving mission-critical data centers and industrial markets (oil & gas, renewables/BESS, mining, and utility). You will take ownership of electrical scope on projects of moderate to high complexity, coordinating interfaces across switchgear/switchboards, transformers, protection, ATS, UPS systems, batteries, grounding, and auxiliary systems. This role partners closely with mechanical, controls, manufacturing, and field teams to deliver safe, code-compliant, manufacturable modular systems. Key Responsibilities: • Develop one-lines, three-lines (as required), and overall power architectures for modular E-Houses and skids (MV and LV)., • Size and specify major equipment (switchgear/switchboards, transformers, bus duct/busway interfaces, breakers, fuses, metering, power quality components)., • Perform equipment sizing studies and calculations as applicable (load summaries, short circuit, protective device coordination inputs, arc-flash data inputs, voltage drop where required)., • Define grounding and bonding strategy, including interfaces to skid/baseframe and site grounding systems., • Specify and integrate ATS and UPS systems including bypass/maintenance arrangements, redundancy philosophies (N, N+1, 2N), and operational modes., • Coordinate electrical interfaces for battery systems supporting UPS and/or energy storage (DC distribution, battery cabinets/racks, disconnects, monitoring, and safety interfaces)., • Define interlocks and control interfaces (alarms, permissives, trips, emergency power off) in coordination with controls/protection teams., • Develop schematics and wiring concepts for auxiliary power, controls power, lighting, receptacles, and panelboards within the module., • Coordinate with mechanical/fire systems for power and signal interfaces (HVAC units, dampers, detection/suppression releasing panels, ventilation shutdowns)., • Support compliance activities as required (UL/NRTL, customer standards, IEC interfaces when applicable) and coordinate with suppliers on documentation., • Produce and/or review electrical drawing packages (one-lines, schematics, layouts, interconnect diagrams, cable schedules) and support BOM development., • B.S. in Electrical Engineering (or equivalent)., • Minimum of 4 years of experience designing industrial or mission-critical power distribution systems (data center experience strongly preferred)., • Hands-on experience with one-line creation and electrical system integration across switchgear/switchboards, protection, and controls interfaces., • Working knowledge of U.S. electrical codes/standards relevant to the work (e.g., NEC/NFPA 70, NFPA 70E; familiarity with IEEE/NEMA/UL practices as applicable)., • Experience with MV equipment (e.g., 5kV-35kV class) and/or packaged substations and E-Houses., • Experience with UPS topologies, maintenance bypass schemes, and data center redundancy design., • Familiarity with protective relay selection/settings coordination workflows and metering/SCADA integration., • Experience supporting UL/NRTL listings or major customer compliance programs for modular power equipment., • Must be able to lift up to 50 pounds at a time. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: This is an exciting opportunity for a Senior Electrical Engineer to play a key role in the development of our next-generation UAV platforms. You will take ownership of the electronics hardware and avionics for a clean sheet UAV platform, with responsibilities including: • Design, development, integration, testing, and ongoing support of VTOL UAV hybrid power distribution and avionics systems, • Sourcing, qualifying, and integrating commercial off-the-shelf (COTS) and custom avionics components, • Architecture and implementation of low- and high-voltage/current systems, including high-voltage battery interfaces, ESCs, and power management units, • Electrical thermal analysis of high-power components to ensure safe operation under worst-case environmental and loading conditions, • Designing new printed circuit board assemblies (PCBAs) for long-range VTOL hybrid UAV, • Developing cost-effective and reliable interconnect solutions, • Refining existing designs for improved reliability, usability, and maintainability, • Collaborating with procurement to ensure timely component delivery, • Performing make-vs-buy assessments and overseeing outsourced engineering efforts, • Defining system and component-level requirements, • Creating and executing test procedures to verify and validate your designs, at the prototype stage and in production, • Ensuring compliance with internal, regulatory, and customer requirements, • Supporting and/or leading root cause analysis (RCA) activities, • Developing leadership skills as a senior member of the engineering teamRequirements:, • Bachelor’s degree in Electrical Engineering and 10+ years of experience (a plus), • Demonstrated experience in the design and analysis of low- and high-voltage/current electrical systems, including insulation, creepage/clearance, and thermal considerations, • Experience conducting electrical thermal analysis to ensure cooling, enclosure, and heat dissipation requirements are met, • Proficiency with ECAD design tools for PCB development, including schematics, layout, aerospace standards, and troubleshooting, • Ability to design manufacturable, reliable, lightweight, tightly packaged and cost-effective PCBAs, peripherals and cable and wire assemblies, • Experience designing and testing power distribution architectures on UAV platforms, • Experience integrating avionics, datalink, and payload subsystems on UAV platforms, • Knowledge of electric propulsion, electronic speed controllers, and battery systems, as well as integrating ICE engines and power management of charging systems, • Understanding of RF and datalink hardware selection, analysis, integration, and testing, • Familiarity with lab equipment like multimeters, oscilloscopes, and network analyzers, • Working knowledge of embedded communication protocols (including CAN), avionics components, autonomous systems, and rapid manufacturing tools, • Strong understanding of design methodologies for reliability, usability, and manufacturability, • Excellent communication skills across all levels (internal/external), • Understanding of electromagnetic interference (EMI) and mitigation techniques, • Enthusiastic and responsible team player with a meticulous attention to detail, • Strong work ethic and ability to manage demanding projects, • Thrives in a fast-paced, safety-critical environment with a focus on quality, • Excellent communication skills across disciplines, leadership, and external contacts, • Self-motivated and independent with a positive and collaborative approach, • Experience in aerospace electronics preferred, with mechatronics experience also considered, • Competitive salary, • Rewarding and challenging projects with autonomy, • Opportunity for growth within a rapidly expanding company

Job Description Onsite: Travel: 0% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! The Manufacturing Engineer will drive production performance, strengthen safety practices and implement standardized processes within a manual manufacturing environment. This role is highly hands on and located at our Phoenix, Garland, Plano and McKinney facilities. Will work directly on the shop floor to improve workflow, increase throughput, and mentor Operations personnel to deliver measurable results. This position is ideal for someone who thrives in high-growth environments and enjoys building structure where it does not yet exist. Key Responsibilities: Production Improvement • Identify bottlenecks in manual operations and implement rapid improvements., • Improve workstation design, material flow and cycle times., • Increase output while maintaining quality and safety standards., • Develop and implement standardized work instructions., • Establish project tracking and accountability systems for engineering initiatives., • Create repeatable processes to support growth and onboarding., • Ensures improvements are documented and sustained., • Identify operational risks introduced by rapid growth., • Improve ergonomics and reduce manual strain., • Provides daily structure and direction., • Translate ideas into scoped, deadline driven projects., • Hold multidisciplinary teams accountable to measure deliverables., • Foster a culture of execution and continuous improvement., • Bachelor degree in Mechanical, Industrial or Manufacturing Engineering or equivalent work experience, • Minimum of 5 years of hands-on experience in a manufacturing environment, • Strong experience in manual production operation, • Proven record of delivering measurable productivity improvements, • Experience implementing standardized systems and developing documentation, • Ability to mentor and provide training, • Must be able to lift up to 35 pounds at a time., • Prolonged periods standing on the manufacturing floor and sitting at a desk and working on a computer., • Must have vision correctable to 20/20 and be able to wear required PPE (hard hat, safety glasses, boots, gloves, etc.)., • Duties are performed in a loud production setting subject to extreme temperatures. Some duties may be required to be performed outside., • Prolonged periods sitting, standing, walking, and performing repetitive tasks. Work Environment: May work in various settings at the Maverick Power facilities, in offices, in multiple shops, and in commercial buildings. Maintaining the same position or posture while performing tasks and sitting for prolonged periods. The above-noted job description is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the applicant a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of the position. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Onsite: Travel: 25% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! As a Senior Mechanical Design Engineer with Maverick Power you will be working with our engineering and manufacturing teams to design and produce power distribution and control systems for industry leading customers all over the world. Your work will be exciting and varied working on projects which require knowledge of applications, electrical/electronics, mechanical, manufacturing, quality and safety. Never a dull day, and always a challenging problem to solve in a collaborative, goal focused environment. Key Responsibilities: • Mechanical design for low and medium voltage switchgear, switchboards, panel boards, and control panels., • Evaluate drawings and specifications to develop designs that meet customer requirements., • Design electrical enclosures meeting applicable UL, ANSI, IEEE, etc. safety standards., • Create bills of materials, specify parts, work with internal and external manufacturing., • Develop test plans for product validation and certification., • Work with 3rd party labs to test and analyze data., • Act as point of contact with other Mavericks and outside engineering firms., • Determine deliverable due dates and hold to the schedule., • Lead interaction with other functions and locations to determine optimum product/process solutions., • Bachelor's Degree in Mechanical Engineering or Mechanical Technology, • Minimum of 10 years mechanical design experience., • Minimum of 10 years of experience with 3D CAD, SolidWorks is preferred., • Minimum of 1 year experience with FEA, CFD, and/or Electro-Magnetic simulation software such as Ansys, Abaqus, EMS, Simscale, or Solidworks., • Previous design experience with low and medium-voltage switchgear assemblies/systems and associated equipment is desirable., • Solidworks CSWA/P/E certifications are desirable., • Must be able to lift up to 50 pounds at a time., • Prolonged periods standing on the manufacturing floor and sitting at a desk and working on a computer., • Must be able to navigate the warehouse and reach items both high and low., • Must have vision correctable to 20/20 and be able to wear required PPE (hard hat, safety glasses, boots, gloves, etc.)., • Must be able to stand, walk, climb, bend, stoop, and work at heights for extended periods. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Job Summary The primary responsibility of the Aircraft Systems Engineer in the Field Sustaining Engineering department is to provide engineering support and troubleshooting guidance for all certified Cirrus products (current and legacy). Secondary responsibilities include but are not limited to design for reliability improvement, design for manufacturability and/or serviceability improvement, customer satisfaction improvement, and component obsolescence support. The aforementioned responsibilities shall be accomplished in accordance with all governing FAA regulations and Cirrus specifications, investigated using a combination of analysis, bench, and flight testing, and incorporated using best design practices to ensure a robust product line for years to come. This position will be located in Duluth, MN for 2-3 months for training, then be relocated to Knoxville, TN. Duties and Responsibilities/Essential Functions • Investigation and testing of aircraft systems and equipment, including:, • Research and identification of potential solutions to design objectives, • Test case development, execution, and troubleshooting on both bench and aircraft, • Requirement development and traceability, • Detail design and installation, • Coordinate development and system integration within Cirrus and with suppliers, • Generate high quality reports and test plans that will be used to meet FAR Part 23 requirements, • Investigate and troubleshoot aircraft system issue reports from production and field aircraft To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Education and/or Experience: • Bachelor’s degree in an Engineering field (or equivalent) required, • 5+ years experience engineering experience required, general aviation aircraft/systems/structures preferred, • Experience with aircraft systems development processes and requirements traceability preferred, • Aircraft systems design, integration, installation, testing and certification experience preferred, • Basic knowledge of aircraft, automotive, or consumer/mechanical systems desired, • Experience with data acquisition system development and application desired, • Must be able to demonstrate the ability to read, write and speak the English language, • Ability to communicate technical knowledge in a clear and understandable manner, • Ability to work both independently and within a cross-functional team, • Ability to efficiently learn new skills and manage multiple tasks, • Use of lab equipment such air-conditioning system maintenance software and test equipment, • Ability to interpret various forms of data and use the information to determine cause and justify solutions to issues To perform the job successfully, an individual should demonstrate the following competencies: • Manages Complexity: Makes sense of complex, high quantity, and sometimes, contradictory information to effectively solve problems., • Action Oriented: Takes on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Resourcefulness: Secures and deploys resources effectively and efficiently., • Collaborates: Builds partnerships and works collaboratively with others to meet shared objectives., • 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting., • Employer-Paid Coverages: Group term life, short- and long-term disability insurance., • Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options., • Free Health Tracking: With rewards for meeting health goals., • Generous PTO: 120 hours accrued within the first year., • Employee Referral Bonus: For referring talented candidates., • Career Development: Tuition reimbursement and professional growth opportunities., • Exclusive Discounts: Access to partner and marketplace discounts. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Mechanical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, the ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Mechanical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES • Understand the project scope and requirements., • Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines., • Review and verify material submittals for A/E and Client approval., • Confirm delivered materials match approved submittals., • Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly., • Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion., • Conduct internal quality audits and site inspections., • Adhere to Quality, Health, Safety, & Environment (HSE) standards., • Provide technical support to address operational challenges and client concerns., • Plan and inspect Definable Features of Work (DFWs)., • Develop and implement Audit and Test Plans for quality inspections and testing., • Maintain and update Quality manuals, checklists, and forms., • Collaborate with third-party QA/QC firms as needed., • Participate in Quality Management System (QMS) audits., • Build relationships with project partners, consulting engineering firms, public agencies, and clients., • Ensure document control compliance and maintain project submittal logs and quality control reports., • Verify and document material compliance with approved submittals., • Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties., • Investigate and address non-conformance issues promptly., • Ensure calibration of inspection, measurement, and test equipment., • Liaise with the General Contractor, Client, and Project Management team to resolve quality issues., • Prepare presentations on progress, findings, and recommendations for management., • Review subcontractors' submittals for compliance., • Coordinate and monitor subcontractors, suppliers, direct labor, and materials., • Collaborate with public utility suppliers for final service connections., • Coordinate activities of inspection agencies., • Achieve required MEPS and electromechanical inspections., • Assist in preparing periodic QA/inspection progress reports., • Review and approve subcontractor work percentages., • Oversee commissioning processes. Required Qualifications: • 15+ years of construction and quality management experience., • Bachelor's degree in mechanical, electrical engineering, or a related field., • Experience with managing field engineering, inspection, and NDE related to all QA/QC functions., • Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects., • Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis., • Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded., • Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor., • Technical knowledge of materials and construction concepts., • Experience working as a Mechanical Quality Supervisor for large commercial, industrial, or mission-critical facilities construction projects., • An excellent understanding of construction Quality Management Systems (QMS)., • Familiarity with punch list procedures and project closeout processes., • Strong attention to detail and excellent analytical skills., • Project Management Professional (PMP) certification., • Construction Quality Manager Certification (CCQM), • US Army Corps of Engineers (USACE), • Certified Quality Auditor (CQA), • Member of the American Society for Quality, • Six Sigma Certifications, • ISO 9001, • Green Business Certification (LEED), • Strong background in data center development and construction POSITION DETAILS: • Primary Locations (On-site):, • Conesville, Ohio, • Frederick, Maryland, • Indianapolis, Indiana, • Frankfort, Kentucky, • Lansing, Michigan, • Dover, Delaware, • Shippingport, Pennsylvania, • Charleston, West Virginia, • Position: Mechanical QA Inspector, • Position Classification: Salary-based full-time regular hours, • Microsoft Office, • Microsoft 365, • CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We design, build, and test next generation weapon systems to give America and its Allies a definitive edge in defense capabilities. Senior Manufacturing Engineer, Radar Castelion is seeking a principal manufacturing engineer to join our Radar development team. In this role, you will own the end-to-end transition from prototype to full-scale production. You will architect and implement manufacturing processes to achieve aggressive production cost, quality, and delivery targets. Core Responsibilities: Define & Scale Manufacturing Processes Lead R&D-to-production transition by capturing existing (yet informal) production flows, formalizing them, and architecting scalable, high-throughput processes (e.g., tooling, layout, SOPs, PFMEA). Design a greenfield production site from scratch to produce radars at scale. Production Test Equipment Selection and Implementation Specify stations and necessary equipment for each production step-defining functional requirements, safety interlocks, interfaces, and use cases. Manage procurement and coordinate with hardware and software teams to ensure integration and deployment Data Capture & Quality Control Collaborate with design engineers and software teams to define what data to collect, set process control limits, and enable data capture, validation, storage, and visualization (e.g., dashboards, SPC tools) Troubleshooting & Continuous Improvement Provide technical support to resolve production issues, lead root-cause analysis, and drive continuous improvements in quality, cost, and throughput Cross-Functional Collaboration & Documentation Engage with R&D, design, test, operations, and suppliers to align manufacturing needs with design intent. Maintain up-to-date, accurate documentation for flow processes, test systems, and manufacturing specs Mentorship & Influence Act as the go-to expert for electronics production and test. Provide guidance to less experienced engineers and influence the company's overall approach to electronics production. Basic Qualifications: • Bachelor's degree in Mechanical, Electrical, Aerospace, Systems, or Manufacturing Engineering (or related field), • Proven record in supporting NPI, pilot runs, and transition to production-delivering robust and scalable manufacturing systems., • Demonstrated success in troubleshooting complex build issues and driving corrective actions., • Skilled at interfacing with design, systems, test, and supplier teams to close the loop on manufacturability and production readiness., • Experience in regulated or defense environments, • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job Description Photronics is Hiring! For more than 50 years, Photronics has been a global leader in photomask technology—powering the innovation behind smartphones, computers, automotive electronics, and the devices people rely on every day. Our success is built on precision, collaboration, and the problem-solving mindset of our people. Join us and help shape the future of semiconductor technology. About the Role The Manufacturing Process Engineer I is an entry-level engineering role that supports the development, optimization, and daily execution of photomask manufacturing processes. Working alongside senior engineers and cross-functional partners across Operations, Quality, IT, and Engineering, you will help ensure our processes run efficiently, consistently, and safely. This is an excellent opportunity for a recent graduate or early-career engineer who is eager to learn, grow, and build technical expertise in a high-tech manufacturing environment. Location: On-site in Allen, Texas, This facility is a government trusted facility. Applicants selected for this position will be required to apply for and maintain a Department of Defense Secret Clearance. In accordance with U.S. government security requirements, only U.S. citizens are eligible to hold DOD Secret Clearance. What You’ll Do • Assist in identifying opportunities to improve process efficiency, quality, and safety, • Support troubleshooting of process and equipment issues alongside senior engineers, • Collect, organize, and analyze production or test data to monitor process trends, • Help maintain and update process documentation, including procedures and work instructions, • Participate in basic process characterization, validation, and qualification activities, • Assist with new equipment setups and initial process evaluations, • Collaborate with operators, technicians, and engineers on daily manufacturing operations, • Provide basic technical support and share knowledge with production teams What You Bring Knowledge, Skills & Abilities • Foundational understanding of engineering or manufacturing principles, • Strong attention to detail and eagerness to learn new tools and technologies, • Effective written and verbal communication skills, • Ability to work independently and collaboratively, • Commitment to following safety and cleanroom protocols, • Curiosity, analytical thinking, and a proactive approach to problem-solving, • 0–2 years of experience in process engineering, manufacturing, or a related technical field, • Internship or co-op experience strongly considered, • Exposure to semiconductor or cleanroom environments is a plus Bachelor’s degree in Chemical Engineering, Materials Science, Mechanical Engineering, Physics, or a related technical field or equivalent work experience. Compensation & Benefits • Competitive salary + bonus potential, • Comprehensive health, dental, and vision insurance, • 401(k) with company match, • Generous PTO and paid holidays, • Career development and training opportunities Agency Notice: Photronics does not accept unsolicited resumes or outreach from search firms or employment agencies. Please, no phone calls or emails to any employee regarding this opening. Resumes submitted outside of our approved agency engagement process will be considered the sole property of Photronics, and no fees will be paid if such candidates are hired. Only agencies with a valid agreement in place with Photronics and assigned to this role may submit candidates.

Job DescriptionWe are seeking a mid-to-senior level Controls Service Technician to support service, diagnostics, and repair of Building Automation Systems (BAS) and HVAC controls. This role is ideal for a hands-on technician with strong DDC experience who can troubleshoot complex systems, support integrations, and work across multiple platforms in a fast-paced service environment. Key Responsibilities • Diagnose, troubleshoot, and repair BAS/DDC systems across commercial facilities, • Perform service calls, including urgent and emergency response situations, • Program, modify, and support control systems using ladder logic and related tools, • Work across multiple platforms including Tridium Niagara, ABB (Cylon), Distech, Honeywell, and Johnson Controls, • Support system integrations and commissioning alongside project teams, • Document service work, updates, and recommendations with clear and detailed notes Required Qualifications • 2+ years of experience with BAS/DDC systems (diagnostics, programming, and repair), • Strong understanding of ladder logic programming (DDC, PLC, or similar), • Experience with one or more platforms: ABB/Cylon, Distech, Honeywell, Johnson Controls, • Valid driver’s license with a clean/insurable driving record, • Strong troubleshooting ability from system-level down to field devices and wiring, • Solid understanding of HVAC/mechanical systems and sequences of operation, • Computer proficiency and strong communication skills Preferred Qualifications • Experience with Tridium Niagara (N4 certification a plus), • Background working for a controls-focused company or division, • Ability to quickly learn and adapt to new systems and technologies Compensation & Benefits • Competitive hourly pay: $35 – $50/hour, • 100% employer-paid medical insurance (employee), • 50% coverage for spouse/family (low-deductible PPO), • 401(k) with 4% company match, • 7 paid holidays + 2 weeks PTO starting day one, • Take-home company vehicle + gas card, • Company-provided phone and laptop Why Join Us? The Building Automation industry is rapidly evolving into an integration-driven field, creating strong career growth opportunities for technicians who enjoy working with advanced technology and energy-efficient solutions. This role offers hands-on exposure to cutting-edge systems and the ability to grow your technical expertise in a high-demand industry. About Us: At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000, our company’s purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.

Job DescriptionOverview We are seeking a talented and motivated Mechanical Engineer to join our dynamic team in McKinney, TX, 75035. In this role, you will be responsible for designing, developing, and testing mechanical systems and components that drive our innovative projects. If you have a passion for engineering and a knack for problem-solving, we want to hear from you! Responsibilities • Design and develop mechanical systems and components for various projects., • Conduct feasibility studies and perform engineering calculations to support design decisions., • Collaborate with cross-functional teams to ensure project alignment and success., • Test prototypes and analyze data to refine designs and improve performance., • Prepare technical documentation, including specifications, reports, and presentations., • Stay updated on industry trends and advancements to incorporate best practices into designs., • Provide technical support and guidance to manufacturing and assembly teams.Qualifications, • Bachelor's degree in Mechanical Engineering or a related field., • Proven experience in mechanical design and development, preferably in a manufacturing environment., • Strong proficiency in CAD software (e.g., SolidWorks, AutoCAD)., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team-oriented environment., • Strong communication skills, both written and verbal. $48.08 - $52.88 / hr

Job Description Hybrid: Travel: 20% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! The Mechanical Design Engineer supports the specification, design, and integration of modular power solutions including E-Houses (modular electrical buildings), Power Distribution Centers (PDCs), and Medium Voltage/Low Voltage skids for mission-critical applications. In this role you will work alongside senior engineers to develop mechanical layouts, HVAC/ventilation concepts, equipment integration details, and manufacturing-ready documentation. You will be exposed to complete modular electrical-room systems that may include switchboards, ATS, UPS, battery rooms, HVAC, fire detection/suppression interfaces, and lithium-ion battery-related mechanical features. Key Responsibilities: • Create and update 2D/3D mechanical layouts for E-Houses and skid-mounted modules (equipment placement, access clearances, openings, penetrations)., • Coordinate mechanical interfaces with electrical equipment (switchboards, transformers, UPS, batteries, cable trays, conduit entry, grounding interfaces)., • Assist with heat load estimates and HVAC sizing support (collect equipment heat loads, document assumptions, support calculations)., • Lay out HVAC equipment, ducting/air distribution components, louvers, and ventilation paths to meet temperature and air quality requirements., • Support mechanical documentation packages including general arrangement drawings, installation details, and bill-of-material inputs., • Participate in design reviews to ensure maintainability, safe access/egress, and mechanical-code considerations are addressed., • Respond to internal shop questions (RFIs) and update drawings as designs evolve through fabrication., • B.S. in Mechanical Engineering (or related engineering discipline)., • Minimum of 2 years of mechanical design experience (internships/co-ops in industrial equipment, modular buildings, HVAC, or fabrication are highly valued)., • Working knowledge of basic engineering fundamentals (heat transfer, airflow, mechanical layouts, materials)., • Exposure to modular E-Houses, electrical rooms, data center power modules, or skid-mounted industrial equipment., • Basic familiarity with HVAC equipment selection concepts and equipment-room environmental control., • Coursework or project exposure related to fire protection, life safety systems, or building codes., • Experience reading equipment submittals and coordinating vendor data into drawings., • Must be able to lift up to 50 pounds at a time. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Remote: Travel: 100% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Compensation + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! This role is key to maintaining the highest level of customer satisfaction and helping assure field deployed equipment meets Maverick Power’s highest quality standards. Supporting equipment installation, start-up and commissioning efforts, troubleshooting and repair of power distribution equipment and collaborating with engineering and manufacturing staff to upgrade, modify or configure installed equipment. This individual must have a keen sense of technical detail, be very well organized, punctual and act with a sense of urgency in support of our customer needs. Service Technician must be able to interpret electrical drawings, write reports, collect, document and organize technical information. Additionally, must me safety minded and strictly adhere to company and site safety policies. Key Responsibilities: • Travel to customer sites and work independently or as part of a team in support of equipment installation, start-up and commissioning efforts., • Collaborate with the Engineering, Field Services and Product Management team to as necessary to address quality and warranty concerns., • Read and interpret technical drawings, service manuals and product instructions for configuration of equipment., • Complete field technical reports, update safety documents, documents quality findings and resolutions utilizing company and customer computer maintenance management systems., • Work with service management, engineering and manufacturing staff to address manufacturing quality issues and engineering change requests., • Responsible for interpreting drawings, wiring diagrams, Bill of Material and specifications., • Utilize standard and specialized electrical test equipment to diagnose, program and repair installed equipment., • Assist engineering staff in collecting the required information for the development of technical documentation when required., • Utilize mechanical abilities to install, adjust and repair various electro-mechanical components or assemblies., • 2-Yr Technical Degree and minimum of 2 years of electrical/mechanical experience. Alternately an equivalent combination of education and experience is required., • Ability to travel, including overnight stays when required., • Ability to interpret technical drawings, wiring diagrams, power studies and other technical documents including equipment operating and repair manuals., • Computer program skills must include Microsoft suite of programs, • Must have a valid driver’s license., • Must be able to drive a company and/or rented vehicle and be insured. EEO/AAP Statement: We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Salary + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! The Product Engineer will be the liaison between manufacturing and design engineering. Knowledge of panelboards, switchboards and switchgear, creating bills of materials, developing drawings, seeking alternative components, helping production and other engineering related activities. Utilize ‘design for manufacturing’ principles to reduce system complexity and build time. Your work will be exciting and varied working on projects which require knowledge of applications, electrical/electronics, mechanical, manufacturing, quality, and safety. Never a dull day, and always a challenging problem to solve in a collaborative, goal focused environment. Key Responsibilities: • Point of contact between production and engineering troubleshooting and resolving issues that may arise., • Support Maverick’s manufacturing, testing, quality, and field service teams to ensure proper implementation of designs., • Review mechanical and electrical designs using 3D CAD software for power distribution for correctness and adherence to proper UL Standard., • Provide feedback to design engineers as needed on mechanical and electrical designs., • Work side-by-side with design engineering team on new product developments., • Support Field Service during installation, commissioning and troubleshooting both remotely as well as onsite as required., • Interpret customer bid package drawings, electrical one-line diagrams, plan layouts and specifications., • Support the manufacture of Maverick standard products by reviewing orders, drawings, and ERP bills of material prior to order release., • Provide technical support for Maverick standard products to both internal and external customers., • Graduate of applicable Electrical Technical School OR Bachelor of Science in Mechanical or Electrical Engineering OR Military equivalent for 3 years., • Experience working in a manufacturing environment, 2 years minimum., • Experience interpreting electrical schematic drawings., • Strong problem solving & interpersonal skills., • Ability to interact with engineering and manufacturing personnel., • Working knowledge of UL 891, UL 67, UL 1558, UL 508A, IEEE/ANSI C37, and NEC/NFPA 70E standards., • Knowledge of low voltage switchboard (UL891)/ switchgear design (UL1558)/panelboard (UL67), installation, and use., • Knowledge of local, state, and federal codes governing the installation and use of low voltage switchgear., • Ability to interpret basic electrical diagrams including front elevation, one-line, and schematic drawings., • Excellent problem resolution skills., • Prolonged periods sitting at a desk and working on a computer. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. Decima International is a professional services company that delivers project management and controls services in the U.S. and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. Its success is built on treating every client like a partner, hiring talented professionals, helping them grow, and expanding at a steady, high-quality pace. Decima offers long-term career opportunities where employees work with major clients on complex, high-profile projects, with plenty of room for professional growth. We are looking for a driven and capable Data Center Design Manager to support the development of hyperscale data center projects. This role is unique: you will act as the owner's representative managing the end-to-end design process. The ideal candidate possesses a deep engineering background combined with the project management rigor of a PMP to ensure that complex data center designs are executed flawlessly in the field. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES • Design Governance: Direct the end-to-end design process from concept through "Issued for Construction" (IFC) documents, ensuring all deliverables align with the master project schedule and budget., • Design Coordination: Lead the integration between CSA (Civil, Structural, Architectural), MEP, ICT, and Security disciplines, to ensure 100% design integration and zero spatial conflicts., • Procurement Support: Assist in the technical review of long-lead equipment submittals to ensure structural and architectural readiness for heavy-load installations., • Stakeholder Management: Serve as the primary liaison between the owner, the Architect of Record (AOR), and the General Contractor. You will lead design review meetings and present technical progress to executive leadership., • Stakeholder Communication: Prepare and present technical status reports and PowerPoint decks to both client leadership and site-level management., • Technical Compliance: Ensure all site-level design changes (Field Changes) comply with owner standards, local building codes, and data center mission-critical requirements., • RFI & Submittal Management: Manage and expedite the technical review of RFIs and submittals, coordinating with consultants and subcontractors to prevent construction bottlenecks., • Risk Mitigation: Identify potential design-related risks and lead cross-functional teams to develop rapid, cost-effective engineering solutions., • BIM Coordination: Utilize Revit/Navisworks for real-time clash detection and resolution., • Value Engineering (VE) Leadership: Proactively lead Value Engineering workshops to identify opportunities for cost optimization and schedule acceleration without compromising "Mission Critical" performance or structural integrity. Evaluate alternative materials and construction methods to drive maximum ROI for the client. Required Qualifications: • 15+ years of professional experience in engineering design and construction oversight., • Bachelor's degree in Civil, Structural, or Architectural Engineering., • Project Management Professional (PMP) certification is highly preferred or required., • Strong background in data center development, or similar mission-critical/industrial environments (e.g., power plants, hospitals, semiconductor labs)., • Proven ability to coordinate between multidisciplinary disciplines (Electrical, Mechanical, Fire Protection,...) in a high-pressure construction environment., • Expert-level proficiency in reading and interpreting structural drawings, site plans, and specifications., • Mastery of Microsoft Office (Excel, PowerPoint) and experience with construction software like Procore, CxAlloy, or Bluebeam., • ⁠Direct experience with AWS, Google, Microsoft, Revit/Navisworks data center design standards., • Experience in Design-Build project delivery models., • Location: Remote Position (US-based), • Position: Data Center Design Manager, • Position Classification: Salary-based full-time hours, • Microsoft Office, • Microsoft 365, • Autodesk Revit, • Autodesk Navisworks, • AutoCAD, • ERP systems for budget and cost management Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Bachelor's degree in Mechanical Engineering. This is a high‑impact, end‑to‑end engineering position in which you'll drive mechanical system design from early concept development and modeling through construction, deployment, and operational readiness. As a Mechanical Engineer on our Data Cente

Spur 399, McKinney, Texas, 75069.We are searching for candidates that meet the required qualifications and experience and are able to perform the essential duties and responsibilities.Work to support the acquisition and operations involved in the processing and management of internal and external gr

PAM Health Rehabilitation - - Responsibilities: Maintenance Tech.II is responsible for preventive & general maintenance & repair of facility and associated equipment.These duties are performed in accordance with all applicable standards to provide a safe environment of care for employees, patients,

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

PAM Health Rehabilitation - - Responsibilities: Perform preventive and general maintenance and repair of facility and associated equipment; Provide safe environment of care for employees, patients, and visitors; Assist with security in the absence of a security officer and other related duties as a

Technician, General Facilities Maintenance Journeyman Electrician.WM Supercenter #206 2041 N Redbud Blvd McKinney, TX 75069-8214.Performs routine preventive maintenance to ensure safety, proper functionality, and aesthetics of facilities, equipment, or fixtures by following established preventive m

Mechanical Contractor known for its commitment to quality, integrity, and strong team culture.

Responsible for performing Electrical Engineering design for aircraft systems integration, including avionics upgrades and power distribution, in the Military Aircraft business area. Qualifications: Bachelor’s Degree in Electrical Engineering or equivalent field and a minimum of 9 years of prior r

Technical Project Manager - Contract job - Hybrid in Allen, TX.NO C2C - Must be able to work without sponsorship.Our client in Allen, TX has an immediate need for a Technical Project Manager.You will help bring printing /packaging up to date- shop floors digitize, building out automations.Managing -

Responsible for performing Electrical Engineering design for aircraft systems integration, including avionics upgrades and power distribution, in the Military Aircraft business area. Qualifications: Bachelor’s Degree in Electrical Engineering or equivalent field and a minimum of 9 years of prior r

Walmart Stores - 2041 North Redbud Boulevard - Responsibilities: Performs routine preventive maintenance to ensure safety, proper functionality, and aesthetics of facilities, equipment, or fixtures; Performs major and minor repairs on facilities, equipment, or fixtures by utilizing multiple craft sk

Assistant Project Manager - K-12.Join a team that's shaping exceptional K-12 learning environments.A Texas-based construction organization delivering educational and municipal facilities is seeking an Assistant Project Manager with direct K-12 project experience.The company prioritizes quality, coll

Texas State Gov - JobID: 139701 [Facilities Maintenance] As a Building Maintenance Technician at the State of Texas, you'll: Operate and perform maintenance on commercial heating and air conditioning equipment; Inspect equipment for proper operation and take readings such as temperature, oil level,

Bachelor's Degree in Civil Engineering, Construction Management, or a related field. Collaborate with a team to create value engineering opportunities.

At Unified Door & Hardware Group (UDHG), Assistant Project Managers support the Project Team by helping plan, coordinate, and track all aspects of assigned projects.With strong organization and communication skills, you play a key role in ensuring s Project Manager, Manager, Project Management, Proj