Offres project specialist à Madison, WisconsinCréer des alertes d'emploi

Job Description The Environmental Health Safety (EHS) Manager is responsible for developing, implementing, and maintaining comprehensive environmental, health, and safety programs to ensure compliance with all applicable federal, state, and local regulations. This role promotes a proactive safety culture, reduces risk, and ensures the well-being of employees, contractors, and the surrounding community while supporting operational objectives. Essential Duties and Responsibilities: • Develop, implement, and enforce site-specific EHS plans, programs, and procedures for construction projects., • Manage the workload of the EHS team by coaching and developing the EHS Specialist as their direct manager., • Ensure compliance with OSHA construction standards (29 CFR 1926), EPA regulations, and applicable local/state requirements., • Conduct frequent jobsite safety inspections, audits, and hazard assessments; identify unsafe conditions and behaviors., • Lead and document incident investigations, near-miss reporting, root cause analyses, and corrective actions., • Review and approve Job Hazard Analyses (JHAs), and Safe Work Plans., • Deliver and coordinate safety training, toolbox talks, new-hire orientations, and subcontractor onboarding., • Monitor subcontractor safety performance and enforce contractual safety requirements., • Oversee environmental compliance activities including stormwater pollution prevention (SWPPP), erosion, • control, waste management, and hazardous materials handling., • Support emergency preparedness, including emergency response plans, site drills, and incident response coordination., • Ensure required EHS records including OSHA 300 logs, training documentation, permits, and inspection reports are maintained., • Serve as the primary point of contact for regulatory inspections, insurance carriers, and third-party auditors., • Track safety metrics (TRIR, DART, EMR) and provide regular reports to project and executive leadership., • Promote a culture where safety is a shared responsibility across all levels of the organization., • Maintain Confidentiality. An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. The above statements reflect the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation. Knowledge and Skill Requirements Education: • Bachelor’s degree in Environmental Science, Occupational Safety, Engineering, or a related field strongly, • preferred., • Preferred experience and/or training:, • Previous experience leading for a minimum of 3 years required, preferably in the construction industry., • Previous experience managing EHS staff members strongly preferred., • The ability to work effectively independently and within a team., • Strong working knowledge of construction safety regulations and best practices (OSHA 1926, fall protection,, • excavation, confined space, crane operations, electrical safety, EPA and NFPA)., • Familiarity with EPA environmental requirements relevant to construction sites (SWPPP, spill prevention, waste handling)., • Ability to interpret plans, specifications, and construction schedules to anticipate safety and environmental risks., • Experience conducting jobsite audits, incident investigations, and safety training in active construction, • environments., • Strong leadership and communication skills, with the ability to influence both management and craft workers., • Ability to work effectively with project teams, subcontractors, and regulatory agencies., • Proficient in developing training materials and delivering effective presentations., • Valid driver’s license and ability to travel between jobsites as required., • Strong organizational, analytical, and problem-solving skills. Required Licenses/Certificates: • Relevant certifications such as CSP, ASP, OSHA 510 or CHMM are strongly preferred., • Technology/Equipment:, • Experience with Excel, Word, and Outlook, • Experience with EHS software for tracking OSHA recordkeeping, JHA’s and workplace accident investigations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to walk jobsites with uneven terrain, climb ladders, scaffolding, and stairs., • Ability to stand for extended periods during inspections, meetings, and field activities., • Capability to bend, kneel, crouch, crawl, and reach to assess work conditions., • Ability to lift and carry materials or equipment up to 40 pounds occasionally., • Must be able to work outdoors in varying weather conditions (heat, cold, rain, wind)., • Ability to wear appropriate personal protective equipment (PPE) including hard hats, safety boots, eye, • protection, and fall protection gear., • Visual, physical, and auditory ability to identify hazards and communicate clearly in a construction environment. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. • Team members must be able to work outdoors inclement weather, in addition to office work environment on days not in the field., • Travel throughout Illinois and Wisconsin. Benefits: • Retirement plan, • Health benefits, • Flexible schedule, • Opportunity for advancementCompany DescriptionWe are proud to be the lead solar energy company in Wisconsin. With office locations in Plymouth, Milwaukee, and Madison, our experts are able to meet the needs of all commercial, residential, and utility clients with timely and professional care.We are proud to be the lead solar energy company in Wisconsin. With office locations in Plymouth, Milwaukee, and Madison, our experts are able to meet the needs of all commercial, residential, and utility clients with timely and professional care.

Job Description Arrowhead Pharmaceuticals, Inc. (Nasdaq ARWR) is a commercial stage biopharmaceutical company that develops medicines that treat intractable diseases by silencing the genes that cause them. Using a broad portfolio of RNA chemistries and efficient modes of delivery, Arrowhead therapies trigger the RNA interference mechanism to induce rapid, deep, and durable knockdown of target genes. RNA interference, or RNAi, is a mechanism present in living cells that inhibits the expression of a specific gene, thereby affecting the production of a specific protein. Arrowhead's RNAi-based therapeutics leverage this natural pathway of gene silencing. Arrowhead is focused on developing innovative drugs for diseases with a genetic basis, typically characterized by the overproduction of one or more proteins that are involved with disease. The depth and versatility of our RNAi technologies enables us to potentially address conditions in virtually any therapeutic area and pursue disease targets that are not otherwise addressable by small molecules and biologics. Arrowhead is leading the field in bringing the promise of RNAi to address diseases outside of the liver, and our clinical pipeline includes disease targets in the liver and lung with a promising pipeline of preclinical candidates. Arrowhead's corporate headquarters is in Pasadena, CA with research and development teams in Madison, WI & San Diego, CA, and a state of the art manufacturing facility in Verona, WI. Our employees are nimble, science-driven innovators who are collaborating to bring new therapies to patients in need. The Position The Sr Specialist, Stability QC is responsible for managing and enabling Arrowhead's Quality Control stability program. Key responsibilities of this position include Reference Material Management and Sample Stability Testing and Management. The Sr Specialist, Stability QC is also responsible for maintaining study documentation, ensuring that study reports are complete and accurate, as well as performing stability testing. This position will communicate with contract vendors to coordinate analytical testing and sample storage and is responsible for the reconciliation and disposition of stability samples upon completion of studies. Responsibilities • Manage stability programs for various projects in commercial, preclinical and clinical development internally or at external parties., • Author, review, and approve stability protocols; responsible for planning, execution, data management, data analysis, and data trending to support in-process, drug substance and drug product retest period/shelf-life determination., • Create, implement, and manage stability databases, perform data trending and statistical analysis, study and test forecasting and reporting of metrics and reports in accordance with current GMP, FDA, EU, Global and ICH guidelines and regulations., • Manage Reference material program., • Review raw data to support release testing, stability testing, and reference materials qualification., • Escalate trends and support associated investigations, including temperature excursion assessment, client and regulatory requests., • Summarize stability results by applying analytical testing expertise to ensure scientific and technical excellence. Utilize statistical software like JMP to perform statistical analyses, ensuring robust interpretation of data and adherence to regulatory standards., • Manages Quality Systems records for QC Stability-creates, assesses, reviews Deviations, Change Controls, CAPA's and other applicable stability-related investigations and events., • Assist in the coordination and management of contract labs and storage sites for the preparation and initiation of stability studies., • Assist in the management of internal and external retain and reserve samples., • Produce impactful PowerPoint presentations to effectively communicate stability data to diverse project team members. Support the attainment of project milestones by facilitating stability monitoring and determining expiration dates for clinical and in-process materials., • Work cross-functionally to provide oversight of stability processes and improvements., • Bachelor's degree in Life Sciences with 8 years' relevant industry experience in the pharmaceuticals or biotechnology industry required., • Solid understanding of relevant FDA, EU, and ICH regulatory guidelines and pharmacopeia as applicable to stability study design, degradation pathways, accelerated stability testing, shelf-life determination, expiry dating, and analytical method qualification/validation., • Proficient with ICH, cGLP and cGMP requirements for analytical techniques that include but are not limited to LC, GC, KF, UV-Vis, FT-IR, NMR, LCMS, compendial and microbiology methods., • Solid understanding and hands-on experience of applying basic statistical tools for stability data trending and rate analysis to support retest period/ shelf-life proposals., • Extensive technical writing experience., • Experience with MS programs including Excel, Word, and PowerPoint., • Strong verbal and written communication skills and ability to work in a cross-functional environment. Candidates must have current, valid authorization to work in the country where this role is located. California Applicant Privacy Policy

Job Description As a BIM Project Specialist, you will be responsible for supporting the design, coordination, and execution of Building Information Modeling (BIM) processes specifically for structural detailing, and multidisciplinary coordination. This role plays a critical part in translating engineering concepts into accurate, constructible models and drawings using Revit and related BIM tools. You will work closely with engineers and designers to develop detailed Revit models, ensuring that mechanical, electrical, and plumbing systems are accurately represented and well-coordinated within the project. Your role will contribute to enhancing project efficiency, collaboration, and overall quality. As part of EUA, a fully integrated architecture and engineering firm, BIM coordination is crucial in facilitating seamless collaboration across disciplines. Our holistic approach to design requires accurate and efficient coordination between HVAC, plumbing, electrical, structural, and architectural systems, ensuring that all elements of a project are aligned from concept through to completion. Key Responsibilities • Develop, maintain, and revise structural BIM models in Autodesk Revit for a variety of project types. Ensure that all models comply with industry standards and project specifications., • Produce structural drawings, details, and schedules in support of design and construction documentation, • Assist structural engineers with model setup, modeling standards, and drawing production, • Coordinate structural models with architectural, MEP, and other discipline models to identify and resolve clashes, • Participate in BIM coordination meetings and respond to coordination issues, • Implement and adhere to company BIM standards, templates, and workflows, • Assist with model quality control to ensure accuracy, consistency, and constructability, • Support project teams during design development, permitting, and construction phases as needed, • Standards and Quality Control: Ensure adherence to BIM execution plans (BEP), managing project-specific BIM standards for structural systems. Perform regular quality control checks on models to maintain accuracy and alignment with project goals., • Knowledge of EUA Standards: Ensure all structural models adhere to EUA's internal standards and best practices, maintaining consistency, sustainability, and accuracy across all projects. Your work will reflect EUA’s commitment to high-quality, integrated design and engineering excellence., • Training and Support: Provide technical support to engineers and designers on Revit and BIM processes related to structural systems. Conduct training sessions on best practices and advanced features in Revit., • Accurate and Coordinated Models: Ensure that structural Revit models are fully coordinated with other building systems, free from significant clashes, and meet project requirements., • Effective Coordination and Clash Resolution: Lead coordination and clash detection meetings, ensuring that all design conflicts are identified early and resolved efficiently. Streamline interdisciplinary collaboration to minimize delays and enhance project delivery., • Optimized BIM Processes: Continuously refine and optimize EUA’s BIM processes for structural systems, contributing to improved project timelines and quality outcomes., • Data Integrity and Accessibility: Maintain high standards for data integrity throughout the project, ensuring accurate structural information is accessible to all stakeholders. Qualifications and Skills • Two- or four-year degree or certificate in Drafting, BIM, Civil/Structural Technology, or a related field, • 3+ years of experience in a structural (or architectural) drafting or BIM role, • Experience working in a consulting structural engineering (or architectural) environment, • Familiarity with Revit, Navisworks, Bluebeam, or similar coordination tools, • Knowledge of BIM execution plans, model coordination workflows, and LOD requirements, • Exposure to construction documents for commercial and/or industrial projects, • Strong problem-solving skills, attention to detail, and ability to work within multidisciplinary teams., • Excellent communication skills and the ability to mentor others on BIM/VDC processes related to structural., • Has a proactive approach to projects and problem solving and can self-direct project work, tasks, and process improvements., • Assists in on-site observation and documentation., • Pay range for this position is $50,000 to $80,000 depending on experience

Job Description CEC is a great place to accelerate your career. Here are just some of the things we offer: • Advancement opportunity- Our systems technicians often go on to become, master technicians, and engineers., • Professional growth- We believe in investing in our employees so they can take exceptional care of our clients. We also offer a lucrative bonus program tied to continuous learning and training., • Employee focused- We prioritize work/life balance and offer competitive compensation, health benefits, and paid time off so you can put family first. OBJECTIVE: Lead the physical installation of communications systems on all assigned projects. Work alongside the project team to ensure safety and quality objectives are met by adhering to industry codes, standards, and best practices. CORE RESPONSIBILITIES include, but are not limited to the following: • Project Information Review: Reviews all information with key personnel to address questions and unknowns as required., • Project Planning: Evaluate potential problems, impact, and solutions. Coordinate resources, site access, PPE requirements and equipment needed with Project Manager as required., • Project Review with Customer: Review system functionality, schedule, and plan with customer. Oversee site walk-throughs to verify locations and identify safety hazards., • Project Kick-Off Meeting: Verify understanding of the project plan and review all project milestones. Oversee site walk-throughs to verify locations and identify safety hazards when possible., • Executing Project Plan:, • Lead and follow daily work project plan including safe work practices and requirements., • Perform consistent site evaluations, safety inspections and quality assurances to ensure project plan compliance., • Communicate changes in the SOW to assigned Project Lead/Project Manager and adapt project plan as needed., • Inspect project installation and implementation to CEC quality standards, correct discrepancies, mentor responsible parties and report reoccurrences when necessary., • Create project punch list, perform system testing, coordinate customer training, and finalize documentation completion., • Perform basic programming, configuration and connect physical system to network as assigned., • Assists with the onsite training and mentoring of less experienced team members., • Closing the Project: Perform customer walk-throughs when possible. Submit documentation, obtain customer sign off and verify completion for project fulfillment on all assigned projects., • Post Project Meetings: Provide input to Project Manager on project management processes, procedures, tools, and best practice improvement. Give recommendations to Sales and Engineering on improvement areas and project successes., • Service: Responsible to support Service ticket completion as assigned and provide support to CEC's 24/7 On Call rotation., • This is a safety sensitive position., • Other Duties as Assigned. SUPERVISORY RESPONSIBILITIES • The Systems Specialist leads project team while they are working on assigned projects. MINIMUM QUALIFICATIONS: • 5+ years of technology experience within CEC or similar company., • 1+ years of leadership experience within CEC or similar company, • 3 safety related certifications (preferred), • 2 Industry certifications, • Industry certifications and trainings can/will be obtained during the first year of employment to meet the minimum qualifications when applicable. OTHER SKILLS & ABILITIES: • Must have strong communication skills and general construction or mechanical knowledge., • Knowledge of communications systems, including audio, video, security, fire alarm, wireless, and data networks., • PC proficiency (Windows environment) and working knowledge of Excel is preferred. PHYSICAL, MENTAL AND ENVIRONMENTAL REQUIREMENTS: • Problem solving, creative skills and the ability to exercise sound judgment and make decisions based on accurate and timely analyses., • High level of integrity and dependability with a strong sense of urgency and results-orientation., • High level of integrity and dependability with a strong sense of urgency and results-orientation., • The duties of this job require the employee to effectively speak and understand English language communications., • The employee is required to stand, walk, climb, sit and use hands and fingers., • Lifting of objects is required, up to 50lbs., • Reaching, grasping, and carrying activities are also required., • Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception and the ability to adjust focus., • The noise level in the work environment is usually moderate., • Although most work is performed inside, occasional outside activities are subject to seasonal temperature fluctuations. "Physical, Mental and Environmental Requirements" describe those functions considered to be essential to the performance of the job. All requirements may be modified to reasonably accommodate individuals with disabilities. Communications Engineering Company is an Equal Opportunity/Affirmative Action Employer. We are committed to achieving and maintaining a diverse workforce. Qualified females, minorities, veterans, and disabled individuals are encouraged to apply

Job Description Full time Mechanical Specialist Are you someone who enjoys working with your hands and fixing things? We’re looking for a reliable and motivated Mechanical Specialist to join our team! While we provide full training, basic experience or familiarity with repairing small machines is required. • Schedule: Monday – Friday | 7:00 AM – 3:30 PM (May vary depending on project), • Pay: $20.00/hour, • Troubleshooting and repairing equipment such as:, • Vacuums, • Extractors, • Scrubbers, • Batteries, • Extension cords, • Assisting with supply stocking and order fulfillment, • Maintaining a clean and organized workspace, • Working on ladders or lifts, • Loading/unloading equipment from vans, • Experience or familiarity with fixing small machines (required), • Valid Driver’s License, • Insurable driving record, • Ability to pass a background check and obtain/maintain security clearance, • Health benefits, • Vacation & sick time To apply or schedule a phone interview please contact us Maria Olivas at 608-235-4720 #500MNGR Powered by JazzHR gbRVZfDpCf

Job Description Position Overview The Project Manager / Operations/Inventory Specialist is a hybrid operations role responsible for coordinating project schedules, managing inventory and purchasing, and supporting the administrative functions of the operations department. This position plays a critical role in ensuring projects are properly planned, materials are available when needed, and field teams are supported for efficient execution. This role works closely with Project Management, Engineering, Field Technicians, and Vendors to maintain organization, accuracy, and accountability across all active and upcoming projects. Key Responsibilities The Project Manager / Inventory Specialist is responsible for coordinating project schedules, including assigning labor resources, tracking project timelines, and ensuring alignment between field teams and project requirements. This role manages the procurement process by ordering equipment and materials for upcoming projects, tracking deliveries, and ensuring all required items are available prior to installation. This also includes responsibility for scheduling, checking in deliveries and receiving equipment into our system. Responsibilities include maintaining accurate inventory levels, organizing warehouse stock, and managing the intake and distribution of equipment. The position also involves tracking employee time and job costing, ensuring labor is properly recorded and aligned with project budgets. Additional responsibilities include supporting administrative functions such as updating project documentation, coordinating with vendors and suppliers, assisting with logistics planning, and communicating proactively with internal teams regarding project status, material availability, and scheduling needs. The role requires identifying potential delays or shortages and resolving them before they impact project timelines. Systems & Technologies Experience with project management and inventory systems is preferred, including scheduling platforms, purchasing systems, and job costing or time-tracking tools. Familiarity with commercial AV equipment and systems is beneficial but not required. Candidates should possess advanced level ERP recording, as well as spreadsheets, order tracking systems, and internal project documentation tools. Qualifications & Skills The ideal candidate is highly organized, detail-oriented, and capable of managing multiple projects and priorities simultaneously. Strong communication skills are required to coordinate between internal teams, vendors, and field personnel. Candidates should demonstrate problem-solving ability, accountability, and a proactive approach to managing schedules and materials. Experience in operations, logistics, construction coordination, or inventory management is preferred. Requirements Candidates must have a valid driver’s license with a clean driving record and be capable of assisting with light warehouse activities as needed. Experience in project coordination, purchasing, or inventory management is preferred but not required. A strong work ethic, reliability, and the ability to manage deadlines in a fast-paced environment are essential. Career Growth Opportunities This role provides a pathway into advanced Project Management, Operations Management, Procurement Leadership, or other senior administrative roles within the organization. Company Benefits Compensation is commensurate with experience and includes a comprehensive benefits package with health, life, and dental insurance, a 401(k) plan with employer match, paid time off, and a family-oriented work environment. Additional Information Military-experienced candidates are encouraged to apply. Applicants with non-traditional career paths are welcome. A college degree is not required. Position Details Location: McFarland, WI 53558. Job Type: Full-time. Remote Work: Not available. Company DescriptionWisconsin Audio Video is a professional audiovisual integration company backed by over 43 years of experience in designing, engineering, and installing advanced commercial AV and sensory media systems. Specializing in tailored solutions for a variety of industries—including business, healthcare, education, retail, and houses of worship—the company delivers state-of-the-art technologies such as video conferencing, digital signage, LED video walls, and sound reinforcement systems. Serving clients throughout Wisconsin and surrounding regions, Wisconsin Audio Video is committed to enhancing communication, strengthening brand identity, and improving customer and employee experiences through integrated AV solutions.Wisconsin Audio Video is a professional audiovisual integration company backed by over 43 years of experience in designing, engineering, and installing advanced commercial AV and sensory media systems. Specializing in tailored solutions for a variety of industries—including business, healthcare, education, retail, and houses of worship—the company delivers state-of-the-art technologies such as video conferencing, digital signage, LED video walls, and sound reinforcement systems. Serving clients throughout Wisconsin and surrounding regions, Wisconsin Audio Video is committed to enhancing communication, strengthening brand identity, and improving customer and employee experiences through integrated AV solutions.

Job Description Insurance Claims Specialist – Madison, WI (High Income Opportunity) About EverSafe Roofing EverSafe Roofing is a growing storm restoration company serving homeowners across the Madison, Wisconsin area. We specialize in helping homeowners get roof replacements covered through insurance after storm damage. We are building a competitive, high-performance sales team and looking for driven individuals who want to earn, grow, and develop real sales skills. Compensation (Commission-Based): • 100% Commission + Bonuses, • Average deal size: $12,000 – $25,000, • Commission per deal: 8% – 12% Earnings Breakdown: • 1 deal = ~$1,000 – $2,500, • 5 deals/month = $5,000 – $12,500, • 10+ deals/month = $10,000 – $25,000+ Top performers consistently earn $100K+ annually • Performance bonuses + team competitions, • Fast pay opportunities based on project milestones What You’ll Do: • Canvass neighborhoods in Madison and surrounding areas after storms, • Speak with homeowners and schedule free roof inspections, • Educate homeowners on the insurance claims process, • Generate leads and help close deals, • Manage your own territory and schedule What We’re Looking For: • Strong communication skills, • High energy and confidence, • Competitive mindset (you like to win), • Coachable and willing to learn, • Self-motivated and disciplined No experience required—we train the right people ⚠️ What You Should Know: This is a door-to-door sales role involving rejection and persistence. It’s not for everyone—but those who commit build valuable skills and earn strong income. Why Join EverSafe Roofing: • Proven training system (scripts, roleplay, ride-alongs), • Clear path to higher earnings and leadership roles, • Competitive, team-driven environment, • Real opportunity to build a high-income skill Growth Opportunities: • Sales Rep → Senior Rep, • Senior Rep → Team Lead Madison, WI and surrounding areas How to Apply: Apply today to be considered for a fast, performance-based interview process. Top candidates will move to a second-round interview with live roleplay and a potential trial day in the field. Final Note: “If you’re looking for something easy, this isn’t it. If you’re competitive and want to earn, you’ll do very well here.”

Job DescriptionDescription: Enhance your career at raSmith as a Real Estate Acquisition Specialist in our Transportation Services division and discover why we’re ranked #2 as a Top Workplace. raSmith is a growing multi-disciplinary consulting civil and structural engineering and land surveying firm with over 45 years of experience. We work with clients on projects nationwide from our six office locations in Wisconsin, Illinois, and California. Are you ready to contribute your talents to a variety of projects that positively impact communities across the country? Consider this opportunity: We are seeking to hire a Real Estate Acquisition Specialist or a Senior Real Estate Acquisition Specialist; title will be determined based on years of experience. Real Estate Acquisition Specialist – Primary Responsibilities: • Lead real estate negotiation and acquisition strategies for municipal and WisDOT projects, including acquisition cost estimating, property acquisitions, negotiation activities, and relocation processes., • Handle negotiation aspects of relocation services, ensuring adherence to WisDOT and federal Uniform Act requirements., • Coordinate and attend meetings with landowners, including businesses and government agencies, to facilitate acquisition discussions and negotiation activities., • Evaluate plans, plats, maps, and related documents to identify right-of-way and ownership details, and prepare land-rights documents such as easements, options, permits, and project records. raSmith has a strong history of maintaining a people-oriented culture that provides a great work-life balance and a highly competitive compensation and benefit package. We support and encourage professional development opportunities and provide career growth charts for our supervisors and employees. Specific benefits include: • Hybrid home/office-based environment, • Generous paid time off and 8 paid holidays, • Flexible work schedules, • Paid parental leave, • Medical/prescription drug, dental, and vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA) options, • Wellness programs for health insurance savings, • Identity Shield and LegalShield programs, • Life assistance programs, • Corporate wear reimbursement, • Employee referral bonus, • 401K plan with immediate employee participation and generous company match, • Tuition and professional licensure/certification reimbursement program, • Paid memberships to professional organizations, • Paid seminars and conferences, • A variety of mentoring and training programs, • Company picnics and seasonal events, • Social and team-building opportunities, • 2-10 years experience in Transportation real estate/right-of-way services: negotiation and acquisition., • WisDOT approved Negotiator, or ability to obtain., • Notary Public, or ability to obtain., • Familiarity with WisDOT Real Estate Program Manual., • Understanding and experience with real estate laws, eminent domain principles and practices, the Uniform Act, and NEPA., • Ability to flex hours to include evenings and weekends as needed., • Applicable U.S. based work experience.

Job Description We are seeking a motivated Construction Manager/Customer Care intern to join our team this summer! This role provides hands-on experience in construction management while enhancing customer satisfaction. The ideal candidate will assist in project coordination, contractor communication, and customer interactions to ensure smooth operations and exceptional service. Compensation: $15 - $20 hourly Responsibilities: • Participate as an active member of the Production/Customer Care teams., • Work to deliver a quality product, on a timely basis, in the most efficient manner possible., • Perform jobsite inspections of all homes under construction in specified communities once daily to identify potential concerns and monitor compliance with the production schedule. Take proactive measures to resolve identified issues., • Develop a thorough understanding of all Tim O'Brien Home plans, Trade Partner Scopes of Work, Customer Care responsibilities/standards, and Care/Maintenance of our homes., • Execute duties as assigned by the supervising Building Professional or Customer Care Specialist., • Develop a professional and ethical relationship with TOH Trade partners, enforcing the Trade partner's Scope of Work/Safety requirements., • Perform daily safety inspections., • Visit specified community model homes weekly to identify any care & maintenance items. Address items with trade partners in a timely manner with an awareness of upcoming events/open house hours., • Excellent communication and interpersonal skills., • Ability to work independently and with a team., • Working understanding of all stages of the construction process, including both rough and trim stages., • Ability to read and comprehend detailed construction blueprints, specifications, and detailed development drawings. At Tim O’Brien Homes, we’re not just another homebuilder. We’re Wisconsin’s leader in High-Performance, Energy-Efficient Homebuilding, winner of 6 U.S. Department of Energy Housing Innovation Awards, and consistently ranked in the top tier nationally for customer satisfaction by AVID. Why Tim O’Brien Homes? • Market leader in quality and energy efficiency, • Award-winning customer experience Apply today. Bring your drive. Let’s win together

Job Description Arrowhead Pharmaceuticals, Inc. (Nasdaq ARWR) is a commercial stage biopharmaceutical company that develops medicines that treat intractable diseases by silencing the genes that cause them. Using a broad portfolio of RNA chemistries and efficient modes of delivery, Arrowhead therapies trigger the RNA interference mechanism to induce rapid, deep, and durable knockdown of target genes. RNA interference, or RNAi, is a mechanism present in living cells that inhibits the expression of a specific gene, thereby affecting the production of a specific protein. Arrowhead's RNAi-based therapeutics leverage this natural pathway of gene silencing. Arrowhead is focused on developing innovative drugs for diseases with a genetic basis, typically characterized by the overproduction of one or more proteins that are involved with disease. The depth and versatility of our RNAi technologies enables us to potentially address conditions in virtually any therapeutic area and pursue disease targets that are not otherwise addressable by small molecules and biologics. Arrowhead is leading the field in bringing the promise of RNAi to address diseases outside of the liver, and our clinical pipeline includes disease targets in the liver and lung with a promising pipeline of preclinical candidates. Arrowhead's corporate headquarters is in Pasadena, CA with research and development teams in Madison, WI & San Diego, CA, and a state of the art manufacturing facility in Verona, WI. Our employees are nimble, science-driven innovators who are collaborating to bring new therapies to patients in need. The Position The purpose of this position within the Quality Assurance department is to support on-going development programs for preclinical, clinical, and commercial drug candidates at Arrowhead. A key function of the position will involve continued development and maintenance of quality systems supporting Good Manufacturing Practices (GMP) within the organization. The Senior Specialist is expected to interact with multiple internal departments, as well as assist with quality oversight functions for external organizations. 2nd shift work hours are ~1:00 p.m. – 11:30 p.m., Monday – Thursday, includes shift differential Responsibilities • Review and approval of internal and vendor generated documentation, including master batch records, executed batch records, labels, certificates, reports, and testing records., • Perform QA on the floor and manufacturing room release., • Review and release of completed manufacturing batch documentation including Quality Control (QC) and Analytical Development (AD) data and issuance of Certificates of Analysis., • Writing, review, change control, approval, issuance, and organization of applicable procedural documents., • Issuance, review, tracking, and completion of internal quality events (QEs), such as deviations, out of specifications (OOS), and CAPAs., • Organization and control of quality, compliance, and project related documentation., • Maintain knowledge of current compliance expectations and regulations pertaining to drug development., • Collaborate with, and provide quality support for, other departments (Manufacturing, QC, AD, Project Management, etc.)., • Participate in meetings as the QA team representative as needed., • Minimum of a bachelor's degree in a science discipline, or equivalent required., • Minimum of eight (8) years of experience working in a regulated environment with preference to quality assurance and/or manufacturing experience or equivalent required., • Excellent written and verbal communication skills and ability to communicate effectively with internal and external parties., • Ability to work with diverse professionals and promote cooperation, shared understanding, and commitment to ensuring best in class quality assurance protocols., • Highly motivated team player willing to contribute to a growing pharmaceutical organization., • Ability to work independently and manage priorities within a fast-paced environment., • A detail-oriented self-starter who endeavors to anticipate and resolve problems and seeks opportunities to grow their role and responsibilities at Arrowhead., • Working knowledge of drug GMP regulations, as well as ICH/FDA guidance documents., • Understanding of document control requirements in an FDA regulated organization., • Experience with quality systems supporting GMP regulations (21 CFR Parts 11, 210, 211, and EU GMP, including Annex 11 and 15)., • Competent knowledge of and ability to use Microsoft Word, Excel, and Smartsheet. Candidates must have current, valid authorization to work in the country where this role is located. California Applicant Privacy Policy

Job DescriptionCompany Description As a world market leader in crop protection, we help farmers to counter these threats and ensure enough safe, nutritious, affordable food for all – while minimizing the use of land and other agricultural inputs. Syngenta Crop Protection keeps plants safe from planting to harvesting. From the moment a seed is planted through to harvest, crops need to be protected from weeds, insects and diseases as well as droughts and floods, heat and cold. Syngenta Crop Protection is headquartered in Switzerland. Job Description The Biologicals Specialist will strive to be an industry-leading source of biological product information and a key training resource for our internal sales teams and customers, ensuring they have a deep understanding of our products and their function within key crops. Showcasing our current products, as well as new technologies, in demonstration plots with key customers is another focus area. Territory: Northern Illinois and Wisconsin Duties: • Territory Planning: Develop annual business plans with key retailers and conduct quarterly reviews to achieve sales milestones., • Sales Achievement: Meet sales targets using Qlik reporting and monthly reviews with area managers to track progress and adjust tactics., • Technical Training: Provide internal and external training on biological products to establish Syngenta as the industry technical leader., • Demo Trials: Organize product trials to generate yield data for marketing and support new product launches., • Sales Forecasting: Complete monthly rolling forecasts using Excel to project current and future sales performance.Qualifications, • Agricultural Expertise: Bachelor's degree (Agricultural Science preferred) with strong agronomy fundamentals and plant physiology/abiotic stress understanding., • Sales & Account Management: Minimum 3 years agribusiness sales experience (preferably fertilizer/plant nutrition/biologicals) with proven account management and demand creation skills., • Territory Knowledge: Familiarity with local market dynamics and customer base., • Industry Specialization: Experience specifically in biologicals or specialty fertilizer markets., • Travel Requirement: 30% travel with minimal overnight stays required. Additional Information What We Offer: • A culture that celebrates diversity & inclusion, promotes professional development, and strives for a work-life balance that supports the team members. Offers flexible work options to support your work and personal needs., • Full Benefit Package (Medical, Dental & Vision) that starts your first day., • 401k plan with company match, Profit Sharing & Retirement Savings Contribution. Syngenta is an Equal Opportunity Employer and does not discriminate in recruitment, hiring, training, promotion or any other employment practices for reasons of race, color, religion, gender, national origin, age, sexual orientation, marital or veteran status, disability, or any other legally protected status. WL:4B #LI-NL2

Job Description We are looking for someone who can exhibit a positive, friendly, and helpful attitude. If this sounds like you, join our team!! Revere Electric Supply is a fourth-generation, family-owned electrical distributor that's been around for 100 years! We believe the secret to success is the employment of industry-leading professionals. If you are seeking employment in a dynamic, growing organization, then you may be the perfect fit for Revere! We have an opening for a Lighting Quotations Specialist to play a critical role in our project business. This position is responsible for developing accurate, competitive lighting quotations while partnering closely with sales, customers, and manufacturers to drive project success. What we offer: • Comprehensive benefits package and PTO plan, • Paid holidays, • 401(k) retirement savings plan with company match, • Local candidates only. No relocation will be provided., • Monday – Friday 8:00 am to 5:00 pm, • Own the quotation process from initial review through final delivery, ensuring accuracy, completeness, and competitiveness, • Analyze project specifications to identify cost-effective lighting solutions without compromising quality or performance, • Partner with sales teams to prioritize opportunities, align on strategy, and meet critical deadlines, • Communicate proactively with customers to clarify scope, manage expectations, and support project needs, • Collaborate with manufacturers and rep agencies to secure pricing, product details, and lead times, • Manage multiple quotes simultaneously in a fast-paced, deadline-driven environment, • Identify gaps, inconsistencies, or risks within project specifications and take action to resolve them, • Track, update, and maintain all quotation documentation with a high level of organization and accountability, • 3–5 years of experience in lighting, electrical distribution, quoting, or a related project-based role preferred, • Proven ability to manage multiple priorities without sacrificing accuracy or deadlines, • Strong analytical mindset with the ability to evaluate options and make sound decisions quickly, • Excellent communication skills with the ability to work effectively across teams and with customers, • High attention to detail and a strong sense of ownership over your work, • Proficiency in Microsoft Excel, Word, and PDF tools (Adobe/Nitro), • Experience with Solar Eclipse or similar systems is a plus Requirements/Qualifications • Self-motivated with the ability to take initiative and operate with urgency, • Strong organizational skills and the ability to stay structured in a high-volume environment, • Comfortable working under pressure and adapting to shifting priorities, • Clear and proactive communicator with both internal teams and external partners, • Must be able to sit for long periods of time, • Repetitive hand motion/keyboard use, • Occasional lifting up to 10 lbs. Revere Electric Supply is an equal opportunity employer. Pay range: $45,000 - $70,000 yr. based on experience This amount is what we reasonably believe we will pay for the position; however, offer amounts may vary based on factors such as geographic location, relevant education, experience, qualifications, and skills. For eligible positions, compensation may include participation in an incentive or sales compensation plan paid according to achievement against sales targets and/or business objectives. In addition, Revere offers a full range of benefits such as paid time off, medical/dental/vision insurance, and retirement savings plans for eligible employees. More information about benefits is available here.

Title: Project Control Specialist IV Position Type: Contract role(12 months) Location: Madison, WI or Cedar Rapids, IA JOB SUMMARY: The Project Control Specialist is responsible for the implementation and execution of project controls related work on strategic construction projects. Responsible for the scheduling and cost functions of the project from the development phase through to final project close-out. This includes, but is not limited to, project progress measurement, schedule analysis, cost forecasting, preparation and input of updated cash flow forecasts, and for contract oversight and administration as needed. ACCOUNTABILITIES These accountabilities are not intended as a complete list of specific duties and responsibilities and does not limit or modify the right of any supervisor to assign, direct, and control the work of employees assigned to this job. Primary Accountabilities • Interfaces with Project and Corporate teams on all items related to the execution of the project and/or program., • Acts as the lead resource (subject matter expert) on all project controls related items, including compliance with project specific contractual/commercial terms., • Provides training to company and partner users as necessary to support the effective implementation of contractual scheduling and reporting requirements as well as oversight on training for the use of the Document Management System., • Prepares and maintains a detailed project estimate and ongoing forecast. Ensures the forecast reflects current assessed risks, pending change orders, and contingency. Ensures the corporate outlook models are accurately updated to reflect the current forecast. Monitors and provides early identification and communication of cost performance related to approved amounts from internal and external entities., • Interfaces and coordinates with corporate accounting and finance to ensure proper project accounting and forecasting., • Provides guidance on the use and function of the company’s Document Management System (Unifier) including transmittals, submittals, Requests for Information (RFI), letters, faxes, emails, electronic filing and similar tasks., • Performs detailed schedule reviews and analysis to monitor compliance with contractual dates and to validate progress is accurately reflected and reported., • Advises the project team of areas where performance indicates concern and recommend solutions., • Monitors leading indicators of project risks and communicate to project team, as well as work to resolve the issue., • Provides detailed action plans as necessary to support the construction effort., • Performs quantity take-offs as needed to validate estimates, pricing submissions and progress., • Interfaces as necessary with vendors, contractors, suppliers, and other service providers to ensure accuracy of cost and schedule data. Supervision, • Performs work under the supervision of a Manager. QUALIFICATIONS The requirements listed below are representative of the experience, knowledge, skills and/or abilities required to perform this job. Educational Requirements Education Level Field of Study Required/Preferred Bachelor's Degree Emphasis in business, technical, engineering, construction, project management or related area Preferred Required Experience • Prior experience in project controls of major projects or related experience., • Experience with cost and work-hour resource loaded schedules for progress and payment measurement., • Experience with and Earned Value Management System to measure project progress and performance., • Hands-on experience with Oracle Primavera P6 scheduling software including resource assignments and progress calculations. Experience with Oracle Primavera Unifier preferred., • Experience with UIPlanner corporate financial modeling system. Knowledge, Skills, and Abilities • Knowledge of technologies and systems related to construction document control and management practices., • Ability to analyze problems of moderate to complex nature and implement effective solutions., • Ability to exercise sound judgment, flexibility, initiative and commitment in an environment of rapid change., • Demonstrated effective interpersonal, verbal, and written communication skills. Ability to effectively communicate with internal stakeholders and external agencies., • Knowledge of electric and steam generation operations preferred., • In-depth knowledge of construction contracting methodologies including EPC, Lump Sum, Unit Price, Time and Material, Cost plus, etc., • Ability to interpret contract terms and apply them to different scenarios to determine entitlements during project execution, and the ability to negotiate change orders., • Understanding of corporate financial reporting requirements., • Ability to work effectively in a diverse and inclusive work environment.

Job Title: Project Control Specialist IV Position Type: Contract (12 Months) Location: Madison, WI 53718 Work Mode: 100% Onsite Job Summary The Project Control Specialist IV is responsible for implementing and executing project controls across large-scale construction initiatives. This role supports the full project lifecycle from planning and development through execution and final close-out by managing schedule, cost, forecasting, and performance tracking. The position plays a key role in ensuring accurate project reporting, financial forecasting, and schedule compliance while supporting risk identification, contract administration, and stakeholder coordination. Required Qualifications • Bachelor’s degree in Business, Engineering, Construction Management, Project Management, or related field, • 6+ years of experience in project controls or related construction/project execution roles, • Hands-on experience with cost- and resource-loaded project schedules, • Strong knowledge of Earned Value Management (EVM) principles, • Proficiency in Oracle Primavera P6 (including resource loading and progress tracking), • Experience with project financial forecasting systems and tools, • Strong understanding of construction contracting methods (EPC, Lump Sum, Unit Price, Time & Material, Cost Plus), • Ability to interpret contracts and support change order analysis and negotiations Preferred Skills • Experience with Primavera Unifier or similar document management systems, • Exposure to corporate financial modeling or planning tools, • Understanding of construction documentation processes and controls, • Knowledge of power generation or large infrastructure projects, • Strong analytical, problem-solving, and decision-making skills, • Excellent communication skills (verbal and written), • Ability to work in fast-paced, dynamic project environments Key Responsibilities • Act as a subject matter expert in project controls for scheduling, cost tracking, and performance measurement, • Support end-to-end project lifecycle activities including planning, execution, forecasting, and close-out, • Develop and maintain detailed project cost estimates and forecasts, ensuring alignment with risks, change orders, and contingency planning, • Perform schedule analysis and monitor compliance with contractual milestones and deadlines, • Track project progress using Earned Value Management (EVM) methodologies, • Provide cost performance insights and early warnings on variances from approved budgets, • Collaborate with finance and accounting teams to ensure accurate project financial reporting and forecasting, • Support document control processes, including RFIs, submittals, transmittals, and project documentation workflows, • Provide guidance on project management systems and tools, including scheduling and document control platforms, • Conduct quantity takeoffs to validate estimates, pricing, and progress reporting, • Coordinate with vendors, contractors, and internal stakeholders to ensure accurate cost and schedule data, • Identify project risks and recommend corrective actions and mitigation strategies, • Develop and communicate detailed action plans to support project execution, • Ensure compliance with contractual terms, scheduling requirements, and reporting standards

Position Summary: As an Project Architect or Senior Project Specialist, your responsibilities will only be limited by your ability & your desire. However, the main responsibility of this position will be to provide support to your Project Team(s) in all phases of a project lifecycle – from Conceptual Design through Construction Administration. A Project Architect/Senior Project Specialist will take direction from a Project Manager or Project Designer but will be expected to prioritize, plan, and perform their responsibilities independently with minimal supervision. A Project Architect/Senior Project Specialist is expected to have industry knowledge, technical skills, and soft skills to serve as a Project Captain role as needed on individual projects – directing & mentoring less experienced Team Members and assisting the Project Manager. Some infrequent travel to Milwaukee may be required. Specific functions & responsibilities of Project Architect/Senior Project Specialist include, but are not limited to, the following: Typical Project Responsibilities: • Perform & document code reviews & analysis;, • Research equipment, products, & materials;, • Assist project designers in developing designs & design documents in the Conceptual Design, Schematic Design, and Design Development phases;, • Set-up initial project models in Revit software;, • Produce and/or assist in the production of Construction Documents, and Specifications;, • Review & coordinate consultant documents;, • Produce, coordinate, and submit plan review packages;, • Coordinate work progress and review completed work with project QA/QC checklists;, • Perform QA/QC Reviews of other Team Members’ work;, • Prepare presentation materials;, • Assist with and/or lead Construction Administration responsibilities;, • Direct & mentor less experienced/skilled Team Members., • Participate in internal & external meetings & produce meeting minutes;, • Communicate with Clients, Consultants, Contractors, etc. in coordination with Project Manager;, • Perform other project-related duties as required and assigned. Qualifications: The ideal person for this position would have the qualities, skills, and knowledge listed below. • Demonstrated technical knowledge, soft skills, and emotional intelligence to effectively direct and mentor less experienced / skilled team members;, • Some relevant experience working with, or for, private developer clients and/or similar architectural markets;, • The ability to prioritize & execute a variety of tasks within a single project and across multiple projects;, • A great attitude, great work ethic, and NO inflated ego;, • Substantial experience/knowledge with Revit;, • Experience with AutoCAD software;, • Experience with Sketch-Up software;, • Experience with Microsoft Office Suite Software;, • Familiarity with Adobe Suite Software;, • Please note – For a Senior Project Specialist position, Registration/Licensure is NOT required.

Eppstein Uhen Architects, Inc. (EUA) is seeking a Project Specialist to join our firm, with opportunities in multiple client and market types. This position is responsible for the technical development of a project; independently evaluates, selects, and applies architectural techniques, procedures, and criteria; uses judgment in assignments that have clear and specified objectives with a limited number of variables; assists with writing reports and generating information for specifications; reviews submittals and observes architectural features in the field; assists in the coordination of consultants; and works under the direction of a Project Manager. * Unlicensed / Pursuing Architectural licensure * Works hand-in-hand with the project architect and/or project manager * Understands architectural techniques and procedures * Has experience and knowledge in detailing, technical aspects of projects, and building systems * Has a history of experience in assembling project document sets * Exposed to a variety of responsibilities and scope in the development of project documentation * Has a proactive approach to projects and problem solving and can self-direct project work and tasks * Reviews submittals and assists in on-site observation, actively participates in the Construction Administration phase * Supports and coordinates with consultants * Exposed to and assists with specification sections * High degree of knowledge and skill regarding BIM software The Fine Print * Bachelors degree in Architecture or equivalent experience * Typically 2-10 years experience * Proficient in Revit preferred * Actively working towards licensure * The salary range for this position is $60,000 to $95,000 based on skills and experience Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

As a Regulatory Reporting & Compliance Specialist you'll ensure our business succeeds across all states by submitting essential regulatory filings. You'll work with a diverse team of internal partners, forging collaborations to guarantee timely and precise compliance with state laws and regulations. Dive deep into researching laws, regulations, and requirements to assess their impact on our organization's filing processes, procedures, and guidelines. You will also partner closely with Finance, Data/BI, Actuarial, and IT to source, validate, and reconcile data used in state regulatory/statistical filings. This will include writing and maintaining SQL and GCP queries and documenting data procedures and controls that support audit-ready reporting. As changes unfold, you'll help adapt our business processes to maintain compliance. Moreover, you'll be a catalyst for innovation, identifying and implementing process improvements that enhance our operational efficiency to new heights. Embrace the challenge and improve our organization's success! You will report to the Senior Manager, Regulatory Reporting and Compliance Internal candidates are encouraged to apply regardless of location and will be considered based upon the needs of the role. #LI-Hybrid Position Compensation Range: $62,000.00 - $103,000.00 Pay Rate Type: Salary Compensation may vary based on the job level and your geographic work location. Relocation support is offered for eligible candidates. Primary Accountabilities • Ensure regulatory and stat reporting compliance for Enterprise., • Identify Industry trends and opportunities for development of controls, procedures, cross functional alignment and regulatory reporting., • Monitor and interpret regulatory legislation from DOI's, Boards, Bureaus, etc., • Determine next action for complying - communicate and work with other business areas to comply., • Understandcurrent market trends ensuring compliance, data integrity and best practices., • Work closely with regulators, states, boards, bureaus, vendors and stat agents related to new and existing regulations, new product, state development, legacy retirements, new data source development., • Ensure consistency through documentation and review of existing policies driving automation, future state success while minimizing penalties and capitalizing on credit opportunities., • Develop and provide business requirements for the implementation and maintenance of compliance reporting project., • Document procedures related to regulatory and statistical reporting., • Maintain and troubleshoot existingSQL/BigQueryqueries supporting regulatory/statistical filings; identify root causes of data discrepancies and implement fixes within defined change controls., • Execute and documentreconciliations/tie-outsbetween filing outputs and Financials and/or statutory source reports; investigate variances using query-based analysis, • Performdata quality checks(completeness, duplicates, outliers, trend/variance) and escalate potential data defects with clear evidence., • Document query purpose, logic, assumptions, parameters, and data field to source mapping to support audit/regulator inquiries and repeatable reporting., • Partner with Finance, Actuarial, Data/BI, and IT to confirm business definitions, mapping, and source-of-record alignment for filing data elements., • Identify opportunities to improve reliability/efficiency (standardized checks, controlled templates, query optimization) and contribute to automation roadmap. Specialized Knowledge, Skills, and Education Requirements • Demonstrated experience providing customer-driven solutions, support, or service, • Demonstrated experience inrate and form filings., • Solid knowledge and understanding of insurance products and related pricing concepts., • Solid knowledge and understanding of state insurance laws and regulations. Additional Preferred Qualifications: • Ability to translate reporting requirements into controlled, repeatable workflows using SQL/BigQuery, Excel, and work-tracking tools (e.g., Jira), with strong documentation to enhance operational efficiency and transparency., • Ability to reconcile and validate regulatory datasets to financial or source-of-record totals, • Working knowledge of SQLwith the ability to read, understand, update, and troubleshoot existing queries, • Advanced expertise in Microsoft Excel, including the use of pivot tables, VLOOKUP, and complex formulas., • Knowledge of regulatory and statutory reporting requirements., • 5+ years of experience in regulatory compliance, insurance, or relevant fields., • Ability to develop andimplement controls and procedures to ensure compliance., • Ability to identify industrytrends and opportunities for the development of controls and procedures., • Strong analytical skills to monitor and interpret regulatory legislation., • Ability to collaborate with regulators, states, boards, bureaus, vendors, and statistical agents., • Experience in documenting processes and procedures related to regulatory and statistical reporting., • Skills in driving automation and future state success while minimizing penalties and capitalizing on credit opportunities., • Demonstrated expertise in PowerPoint to create impactful presentations., • Ability to present complex information clearly in Excel/PowerPoint; strong attention to formatting and accuracy Travel Requirements * Up to 10% Licenses * Not applicable. Physical Requirements * Work that primarily involves sitting/standing. Working Conditions * Not applicable. * Offer to selected candidate will be made contingent on the results of applicable background checks * Offer to selected candidate is contingent on signing a non-disclosure agreement for proprietary information, trade secrets, and inventions * Sponsorship will not be considered for this position unless specified in the posting In this hybrid role, you will be expected to work a minimum of 10 days per month out of the Keene, NH; Madison, WI or Boston, MA offices. We provide benefits that support your physical, emotional, and financial wellbeing. You will have access to comprehensive medical, dental, vision and wellbeing benefits that enable you to take care of your health. We also offer a competitive 401(k) contribution, a pension plan, an annual incentive, 9 paid holidays and a paid time off program (23 days accrued annually for full-time employees). In addition, our student loan repayment program and paid-family leave are available to support our employees and their families. Interns and contingent workers are not eligible for American Family Insurance Group benefits. We are an equal opportunity employer. It is our policy to comply with all applicable federal, state and local laws pertaining to non-discrimination, non-harassment and equal opportunity. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. American Family Insurance is committed to the full inclusion of all qualified individuals. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please email ___ to request a reasonable accommodation. #LI-MN2

As a BIM Project Specialist, you will be responsible for supporting the design, coordination, and execution of Building Information Modeling (BIM) processes specifically for plumbing systems. You will work closely with engineers and designers to develop detailed Revit models, ensuring that mechanical, electrical, and plumbing systems are accurately represented and well-coordinated within the project. Your role will contribute to enhancing project efficiency, collaboration, and overall quality. As part of EUA, a fully integrated architecture and engineering firm, BIM coordination is crucial in facilitating seamless collaboration across disciplines. Our holistic approach to design requires accurate and efficient coordination between HVAC, plumbing, electrical, structural, and architectural systems, ensuring that all elements of a project are aligned from concept through to completion. Key Responsibilities • Plumbing Modeling: Create, manage, and maintain detailed Revit models for plumbing systems, from design development through to detailed documentation. Ensure that all models comply with industry standards and project specifications., • BIM Coordination for MEP: Lead coordination efforts between plumbing systems with other building systems. Facilitate and lead coordination and clash detection meetings with internal teams and external consultants using tools such as Navisworks and ACC BIM360. Ensure timely resolution of clashes and conflicts by working closely with all project stakeholders to deliver coordinated, conflict-free designs., • Design Support: Assist in the virtual design and layout of plumbing systems, providing support for system sizing, routing, and space management., • Standards and Quality Control: Ensure adherence to BIM execution plans (BEP), managing project-specific BIM standards for plumbing systems. Perform regular quality control checks on models to maintain accuracy and alignment with project goals., • Knowledge of EUA Standards: Ensure all plumbing models adhere to EUA's internal standards and best practices, maintaining consistency, sustainability, and accuracy across all projects. Your work will reflect EUA's commitment to high-quality, integrated design and engineering excellence., • Training and Support: Provide technical support to engineers and designers on Revit and BIM processes related to plumbing systems. Conduct training sessions on best practices and advanced features in Revit., • Accurate and Coordinated MEP Models: Ensure that plumbing Revit models are fully coordinated with other building systems, free from significant clashes, and meet project requirements., • Improved System Design: Provide accurate and efficient design and coordination of plumbing systems, ensuring optimal performance, space utilization, and ease of installation., • Effective Coordination and Clash Resolution: Lead coordination and clash detection meetings, ensuring that all design conflicts are identified early and resolved efficiently. Streamline interdisciplinary collaboration to minimize delays and enhance project delivery., • Optimized BIM Processes: Continuously refine and optimize EUA's BIM processes for plumbing systems, contributing to improved project timelines and quality outcomes., • Two- or four-year degree in Architectural Technology or Engineering Technology, • Unlicensed / May pursue designer certification. CPDT preferred but not required., • 5-10+ years of experience with Revit and BIM tools in a plumbing context., • Proficiency with Navisworks, Revit, Dynamo, and other relevant BIM software., • Experience leading coordination meetings, performing clash detection, and resolving design conflicts., • Knowledge of plumbing design principles, codes, and standards., • Strong problem-solving skills, attention to detail, and ability to work within multidisciplinary teams., • Excellent communication skills and the ability to mentor others on BIM/VDC processes related to plumbing., • Has a proactive approach to projects and problem solving and can self-direct project work, tasks, and process improvements., • Assists in on-site observation and documentation., • Pay range for this position is $70,000 to $95,000 depending on experience Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description Manufacturing Production Support Specialist At Placon, we believe packaging should do more than protect a product - it should elevate it. For over 60 years, our award‑winning team has combined innovative design, sustainable materials, and precision manufacturing to create packaging that stands out on the shelf and performs flawlessly in the real world. Our Team Members bring unmatched creativity to every project, using unique tool designs, intricate trim features, and functional elements ranging from simple open‑and‑close systems to advanced tamper‑evident mechanisms. We listen closely, collaborate deeply, and work side‑by‑side with our customers from ideation through production to deliver packaging that exceeds expectations. If you want to be part of a company where craftsmanship, innovation, and customer partnership truly matter, we're looking for a Manufacturing Production Support Specialist to help keep our manufacturing operations running at their best. What You'll Do • Collect, enter, and verify production data to maintain accurate reporting, KPIs, and communication boards, • Reconcile work order discrepancies, close work orders, and maintain organized documentation, • Respond to questions about work order status, material availability, and production progress, • Perform month‑end reconciliation for jobs, batches, raw materials, finished goods, and production supplies, • Conduct cycle counts, investigate inventory discrepancies, and maintain accurate stock levels, • Coordinate with Logistics on material receipts, transfers, and inventory adjustments, • Enter raw material receipts and verify documentation against ERP/MRP systems (Oracle preferred), • Monitor and maintain production supplies including colorants, additives, and chemicals, • Provide backup support to the Production Scheduler for daily scheduling and reporting, • Support quality systems including SPC validation, non‑conforming material handling, and recordkeeping, • Assist with internal and external audits and maintain compliance with quality procedures, • Associate Degree and 1+ year of experience, OR High School Diploma with 5+ years in manufacturing, production planning, or inventory control, • Strong proficiency in Microsoft Office (Excel, Word, Outlook), • Experience with Oracle or other ERP/MRP or inventory management systems (preferred), • High attention to detail with the ability to enter data quickly and accurately into ERP/MRP systems., • Excellent organizational skills and the ability to manage multiple priorities, • Strong written and verbal communication skills, • Ability to work independently, maintain confidentiality, and use sound judgment At Placon, you're joining a team that takes pride in craftsmanship, creativity, and doing work that makes a difference. You'll be part of a company that leads the industry in design innovation, sustainable materials, and customer‑focused solutions. A Culture of Innovation Our award‑winning design team pushes boundaries with every project - and you'll support the production systems that bring those ideas to life. Customer‑Driven Excellence We listen, collaborate, and deliver. Your work ensures that every product leaving our facility reflects the quality our customers expect. Growth‑Minded Environment We invest in our people. You'll have opportunities to learn new systems, support scheduling, work cross‑functionally, and grow your career in operations, planning, or quality. A Team That Cares From ideation to production, we work together to exceed expectations - for our customers and for each other. Why Join the Placon Team • Competitive pay and comprehensive benefits, • A stable, growing company with a strong reputation in the packaging industry, • Modern equipment, clean facilities, and efficient processes, • Real opportunities for advancement within operations, planning, and quality, • Office, production floor, and warehouse settings, • Ability to move freely throughout the facility Onsite: Monday – Friday | 7:00 AM – 3:30 PM Compensation We offer a competitive starting pay range of $20.00–$26.00 per hour, based on your experience and skill level.

Job Description We here at the Gustave A Larson Company are looking for our next team member to join us as a Refrigeration Specialist. What qualities are we looking for? We are an HVAC/R wholesale distributor throughout the Midwest and the Mountain States. We thrive on being customer service oriented, being nimble, balancing multiple responsibilities, and developing positive relationships with our teams to work together to get the job done. We are looking for someone who can provide: • Customer excellence and project advice - This is PRIMARILY an inside sales role supporting the following: estimate, sell, and help manage refrigeration projects with a complete and comprehensive understanding of requirements and specifications; mainly, but not limited to, new construction and design build projects., • Refrigeration Systems & Product Knowledge - including equipment capabilities and ancillary materials required for proper project completion. Prepare work to be estimated by gathering proposals, blueprints, specifications, and related documents. Tech experience is fine as long as you have sales experience selling Refrigeration systems as well., • Project Estimation & Computer Skills - experienced with pricing, costing, and quoting, proficient computer skills specifically with estimating and job cost tracking software. Work with sales department to secure vendor pricing., • Prepare submittals for customers in a timely manner - Formulate customer job quotes, expedite customer orders, receive, and submit orders via telephone, email, and quoting software., • Team Spirit – Above all, we operate in a team environment and therefore holding a true team spirit of cooperation and problem solving is a must. We coordinate our sales efforts with our warehouse, counter sales, and inside sales teams., • Sense of Urgency – our customers come first, both internal and external. That’s part of the team spirit, to operate and react quickly. We are proactive and self-motivated., • Candidates are required to have previous refrigeration experience of 5+ years. Should include more than just tech experience - refrigeration selling skills roles also required, • Strong organizational and communication skills must be capable of multitasking and have the ability to prioritize. Applicants must be able to handle multiple projects at one time, manage tight deadlines, and demonstrate excellent verbal and written communication skills. Thrives in a fast-paced environment and provides accuracy and timeliness., • The understanding and experience of prior commercial sales with refrigeration is required., • Commitment to excellent customer service., • Excellent verbal and written communication skills Other Skills/Abilities The requirements listed are representative of the knowledge, skills and/or abilities required. To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. Enthusiasm, initiative, creativity, leadership, teamwork and confidentiality are important attributes to posses for the position. This job description describes the general knowledge, skills, and abilities required to successfully perform the essential functions of the position, as it currently exists. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EEO Statement : Larson is an Equal Opportunity Employer and Prohibits discrimination and harassment of any kind: Larson is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Larson are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, veteran or disability status, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Larson will not tolerate discrimination or harassment based on any of these characteristics. Larson encourages applicants of all ages. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description At Demco, we’re on a mission to provide innovative solutions that empower education communities and libraries. With over 120 years of experience, we’re not just selling products—we’re transforming learning environments. As part of our growing field team, you’ll work remotely to drive sales and build relationships with key decision-makers in K-12 schools and public libraries in your territory. We are looking to expand our field team in following territories: Indiana, Oregon, Washington, Connecticut, Pennsylvania, Rhode Island, Virginia, Tennessee, Texas, Arizona, Central/Northern California, and Oklahoma. If you’re passionate about education and looking for a role where your efforts directly impact the future of learning, this could be the perfect opportunity for you. About Our Company Demco is a leader in providing high-quality solutions and services to educational institutions, libraries, and community organizations. Our goal is simple: to spark curiosity and ignite learning. Our dedicated team works closely with clients to offer cutting-edge products, including furniture, supplies, and learning materials, that enhance the educational experience. We’re looking to expand our team with someone who shares our commitment to lifelong learning and community impact. A Day in the Life As a Learning Environment Field Consultant at Demco, your day-to-day will include: • Identifying New Sales Opportunities: Research and leverage industry tools to discover potential leads within K-12 school districts and public libraries., • Connecting with Key Decision-Makers: Build relationships with Superintendents, Principals, Architects, Designers, Owners Representatives, Library Directors, and other stakeholders to understand their needs and challenges., • Developing Sales Leads: Cultivate opportunities for evolving learning environments (furniture, supplies, equipment, etc.) and assess client requirements., • Transitioning Leads to Internal Sales Team: Once opportunities are developed, partner with the internal sales team for closing and remain involved by providing support and guidance as needed throughout the project., • Team Selling: Partner with the Inside Sales Specialist for your territory to collaborate on prospecting and networking strategies to maximize the potential of your territory., • Remote Collaboration: Work from home but stay closely connected with your team virtually, sharing ideas, strategies, and collaborating to meet and exceed sales goals., • Travel: After your initial onsite training, you will travel 3-4 days per week within your territory to visit educational institutions, with occasional overnight travel., • Networking & Learning: Attend conferences, conventions, trade shows and other K-12 events as needed to expand your knowledge and grow your network., • Leveraging K-12 Associations: Identify K-12 associations that can be leveraged to increase the BDR’s and Demco’s exposure through marketing opportunities and networking events. Job Requirements • Strong relationships and experience working with K-12 education markets, • 3+ years of experience in a hunting sales role, with a proven track record of success, • Bachelor’s degree in Business, Marketing, Sales, or related field, or equivalent work experience, • Familiarity with learning environments, furniture, and supplies, • Self-starter with the ability to work remotely and manage your own time, • Excellent communication and relationship-building skills, • Ability to thrive in a fast-paced, results-driven environment Ready to make an impact in education? Apply today in less than one minute to join our team as an Business Development Representative at Demco. You'll play a key role in transforming learning spaces while enjoying a competitive salary of $80,000 - $110,000, a variable uncapped commission plan that pays between $15,000 - $30,000 at quota and comprehensive benefits. We look forward to reviewing your resume and welcoming you to a company where your contributions truly matter.

As a BIM Project Specialist, you will be responsible for supporting the design, coordination, and execution of Building Information Modeling (BIM) processes specifically for structural detailing, and multidisciplinary coordination. This role plays a critical part in translating engineering concepts into accurate, constructible models and drawings using Revit and related BIM tools. You will work closely with engineers and designers to develop detailed Revit models, ensuring that mechanical, electrical, and plumbing systems are accurately represented and well-coordinated within the project. Your role will contribute to enhancing project efficiency, collaboration, and overall quality. As part of EUA, a fully integrated architecture and engineering firm, BIM coordination is crucial in facilitating seamless collaboration across disciplines. Our holistic approach to design requires accurate and efficient coordination between HVAC, plumbing, electrical, structural, and architectural systems, ensuring that all elements of a project are aligned from concept through to completion. Key Responsibilities • Develop, maintain, and revise structural BIM models in Autodesk Revit for a variety of project types. Ensure that all models comply with industry standards and project specifications., • Produce structural drawings, details, and schedules in support of design and construction documentation, • Assist structural engineers with model setup, modeling standards, and drawing production, • Coordinate structural models with architectural, MEP, and other discipline models to identify and resolve clashes, • Participate in BIM coordination meetings and respond to coordination issues, • Implement and adhere to company BIM standards, templates, and workflows, • Assist with model quality control to ensure accuracy, consistency, and constructability, • Support project teams during design development, permitting, and construction phases as needed, • Standards and Quality Control: Ensure adherence to BIM execution plans (BEP), managing project-specific BIM standards for structural systems. Perform regular quality control checks on models to maintain accuracy and alignment with project goals., • Knowledge of EUA Standards: Ensure all structural models adhere to EUA's internal standards and best practices, maintaining consistency, sustainability, and accuracy across all projects. Your work will reflect EUA's commitment to high-quality, integrated design and engineering excellence., • Training and Support: Provide technical support to engineers and designers on Revit and BIM processes related to structural systems. Conduct training sessions on best practices and advanced features in Revit., • Accurate and Coordinated Models: Ensure that structural Revit models are fully coordinated with other building systems, free from significant clashes, and meet project requirements., • Effective Coordination and Clash Resolution: Lead coordination and clash detection meetings, ensuring that all design conflicts are identified early and resolved efficiently. Streamline interdisciplinary collaboration to minimize delays and enhance project delivery., • Optimized BIM Processes: Continuously refine and optimize EUA's BIM processes for structural systems, contributing to improved project timelines and quality outcomes., • Data Integrity and Accessibility: Maintain high standards for data integrity throughout the project, ensuring accurate structural information is accessible to all stakeholders. Qualifications and Skills • Two- or four-year degree or certificate in Drafting, BIM, Civil/Structural Technology, or a related field, • 3+ years of experience in a structural (or architectural) drafting or BIM role, • Experience working in a consulting structural engineering (or architectural) environment, • Familiarity with Revit, Navisworks, Bluebeam, or similar coordination tools, • Knowledge of BIM execution plans, model coordination workflows, and LOD requirements, • Exposure to construction documents for commercial and/or industrial projects, • Strong problem-solving skills, attention to detail, and ability to work within multidisciplinary teams., • Excellent communication skills and the ability to mentor others on BIM/VDC processes related to structural., • Has a proactive approach to projects and problem solving and can self-direct project work, tasks, and process improvements., • Assists in on-site observation and documentation., • Pay range for this position is $50,000 to $80,000 depending on experience Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview The Customer/Vendor Interface Specialist (CVIS) is responsible for integrating Getinge's DHS systems into a hospital's digital health environment, including connectivity to Electronic Health Record Systems and PACS/VNA systems. The CVIS also supports dataflow between Getinge's DHS systems and 3rd-party platforms. This role is critical for ensuring seamless data exchanges between medical devices, healthcare systems, and external partners while adhering to strict regulatory and compliance standards. Job Responsibilities and Essential Duties • Oversee and manage all customer/vendor integration lifecycle aspects, from scoping and requirements gathering to go-live support., • Act as subject matter expert for integrating Getinge's DHS products into a customer's HL7-based environment., • Collaborate closely with internal teams (e.g., IT, R&D, Quality) to ensure seamless data exchange and system compatibility., • Provide system design recommendations to hospital IT departments for optimal DHS product performance., • Work with hospital IT departments to plan, test, and implement DHS server-side integrated products., • Assist with the completion of IT Security Surveys., • Consult with the sales team to advise on matching customer requirements to technical specifications and ensuring quote accuracy., • Ensures adherence to company quality system processes, protocols, and SOPs., • Maintain a high functional knowledge of HL7, DICOM, and other emerging communication technologies such as FHIR., • Maintain thorough documentation of all integration processes, including interface specifications, testing protocols, and system configurations., • Provide feedback about product enhancements or bugs through service and engineering., • Provide top-level support assistance for Getinge's DHS products as necessary., • Other duties as assigned. Minimum Requirements • Bachelor's degree in Marketing/Management/Information Technology or equivalent combination of education and relevant work experience, • Minimum of 5 years experience in HL7 Integration or an equivalent combination of education and work experience., • Proven understanding of medical information technology systems., • Must have a valid driver's license. Required Knowledge, Skills and Abilities • Excellent understanding of HL7 and DICOM technologies., • Understanding of hospital IT departments, IT networking/connectivity, and IT Security standards in a healthcare environment., • Excellent problem-solving skills, with the ability to troubleshoot complex integration issues across multiple systems and stakeholders., • Communication, interpersonal, and organizational skills., • Strong project management skills, with experience managing full lifecycle integration projects., • Intermediate Microsoft Office skills in Excel, Word, PowerPoint, and Outlook., • Ability to work remotely with minimal supervision. Supervision/Management of Others • N/A Internal and External Contacts/Relationships • Field sales and support teams, project managers, Sr. Management, etc., • Internal departments such as Finance, Sales Compensation, Sales Reporting, Supply Chain, Marketing and Service., • Physicians, nurses, and other hospital personnel. Environmental/Safety/Physical Work Conditions • Responsible for understanding and conforming with the Environmental Policy to ensure that significant environmental aspects that relate to actual or potential impacts with their work are executed to minimize the effects on the environment., • Responsible for bringing to the attention of management any potential improvements that could reduce our environmental impact or to report activities that could result in a negative impact to the environment., • Responsible for understanding and conforming with the Health and Safety Policy to ensure that the significant risks that relate to actual or potential hazards with their work are identified., • Ability to lift up to 25 lbs., • May work extended hours during peak business cycles., • Travel requirements will be up to 25% and above. $97,000-$120,000 + 10% STIP #LI-YA2 #LI-Remote About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

The primary responsibility of the Therapy Development Manager (TDM) is to execute Transcatheter Heart Valve's (THVs) Outreach and Education vision to ensure the availability of TAVR to all patients that are in need and meet the requirements. The TDM will participate in identifying restrictions to patient access and contribute to developing outreach initiatives within a territory, region and area. This is accomplished in part by establishing mutually beneficial, long-term relationships with key physicians and their clinical staff. The TDM, in collaboration, with the Sales organization, will define areas of opportunity along the Heart Team referral pathway to maximize their patient access. Aortic stenosis impacts millions of people globally, yet it often remains under-diagnosed and under-treated. Edwards' groundbreaking work in transcatheter aortic heart valve replacement (TAVR) pioneered an innovative, life-changing solution for patients by offering heart valve replacement without the need for open heart surgery. Our Transcatheter Heart Valve (THV) business unit continues to partner with cardiologists and clinical teams to transform patient care with devices supported by clinical evidence. It's our driving force to help patients live longer and healthier lives. Join us and be part of our inspiring journey. How you will make an impact: * Develop relationships with HCPs through regular outreach and education (live and virtual) activities, referring HCP visits, product demonstration and conference participation. * Identify and meet with existing and potential HCPs to identify clinical needs, and constraints related to TAVR adoption. * Be able to identify and differentiate root cause of patient access restrictions between outreach and patient pathway. * Establish an understanding of referral dynamics and how patient access may be restricted or delayed * Identify account specific bottlenecks and work with sales team to refer to internal partners * Ensure a firm grasp of account activity and current/historical performance to establish strategies for educating physicians about SSAS, TAVR, and the patient pathway. * Become a disease state expert, to help HCP's better understand patient selection, referral timeline, Heart Team concept, treatment options, and TAVR clinical data. * Execute market assessment, including patient population, diagnosis, and treatment funnel/rate. Articulate growth opportunities including patient pathway restrictions to Sales Leadership. * Develops analysis and compiles presentations for local, regional and area teams to understand geographic barriers and opportunities. * Work collaboratively with Regional Directors (RD) and Territory Managers (TM) to identify underserved markets and geographies to support therapy awareness objectives. * Work closely with Sales Operations to develop outreach objectives and timelines. * Travel up to 40% in local territory, region and area What you'll need (Required): * A Bachelor's degree or equivalent work experience based on Edwards criteria required * Minimum of eight (8) years related experience * Experience working as a commercial Clinical Sales Specialist or Pharmaceutical Sales within the medical device industry required or equivalent work experience based on Edwards criteria Required What else we look for (Preferred): * Clinical experience within interventional cardiology or equivalent work experience based on Edwards criteria Preferred * Experience in Pharma or Clinical Sales or equivalent work experience based on Edwards criteria Preferred * Good computer skills in Microsoft Office Suite including Word, PowerPoint, Access, and Excel * Proven successful project management skills * Excellent documentation and communication skills and interpersonal relationship skills including negotiating and relationship management skills with ability to drive achievement of objectives * Extensive knowledge of own area within the organization while contributing to the development of new concepts, techniques, and standards * Extensive knowledge of physician outreach education * Ability to represent leadership on sections of projects within a specific area interfacing with project managers and team * Ability to consult in project setting within specific sections of area Aligning our overall business objectives with performance, we offer competitive salaries, performance-based incentives, and a wide variety of benefits programs to address the diverse individual needs of our employees and their families. Edwards is an Equal Opportunity/Affirmative Action employer including protected Veterans and individuals with disabilities. COVID Vaccination Requirement Edwards is committed to protecting our vulnerable patients and the healthcare providers who are treating them. As such, all patient-facing and in-hospital positions require COVID-19 vaccination. If hired into a covered role, as a condition of employment, you will be required to submit proof that you have been vaccinated for COVID-19, unless you request and are granted a medical or religious accommodation for exemption from the vaccination requirement. This vaccination requirement does not apply in locations where it is prohibited by law to impose vaccination.

Join our dynamic Patient Safety team as a Senior Physician where you'll leverage your medical expertise to ensure the safety of patients in clinical trials and post-marketing settings. In this pivotal role, you'll perform comprehensive medical reviews, provide expert safety monitoring, and deliver pharmacovigilance guidance across assigned projects. You'll also mentor junior team members while tackling complex safety evaluations that directly impact patient wellbeing and regulatory compliance. About the Role As a Senior Physician in Patient Safety , you'll serve as the medical authority on safety profiles for assigned products, ensuring compliance with global regulations while providing critical medical insights. You'll collaborate with cross-functional teams, interact with clients, and contribute to the continuous improvement of our pharmacovigilance processes. Key Accountabilities: General * Maintaining a good working knowledge of the Adverse event/Safety profile of assigned products, labeling documents, data handling conventions, client's guidelines and procedures, and global drug safety regulations and guidelines * Maintaining an awareness of global regulatory requirements, reporting obligations and organizing workload to ensure compliance with internal and regulatory timelines for adverse event reporting * Communicating and discussing issues related to review process with Line Manager/ Project Leader/Designee * Interacting with internal and external stakeholders for resolving issues * Attending and/ or presenting at client/cross functional meetings along with other stakeholders. Working as Subject Matter Experts (SMEs) * Assisting the Project Lead/Functional Lead for audits and inspections * Provides inputs for process improvements * Works closely with Project Lead/Functional Lead for process co-ordination and to ensure meeting all Key Performance Indicators (KPIs) for the process * Function as pharmacovigilance representative/safety scientist * Attend/support Bid defense meetings * Actively mentoring Patient Safety Physicians to develop their skills and expertise Case report medical review (as applicable) * Performing medical review of cases not limited to (including complex and challenging cases requiring expert judgement)), clinical trial, and literature cases including combination products {drug-device}) according to client/Parexel Standard Operating Procedures (SOPs; as applicable) and liaising with the client, as require * Writing Pharmacovigilance/Marketing Authorization Holder (MAH) comment and assessing company causality * Review appropriateness of medical content in narrative for medical coherence * Assessing seriousness, listedness / expectedness of reported events. * Providing medical inputs to case processing team * Raising appropriate follow-up queries for relevant information from the reporter/HCP (Health Care Professional) * Review and verify appropriate selection of adverse events from source documents, assign appropriate Medical Dictionary for Regulatory Activities (MedDRA) code, review narrative * Identify and resolve case issues, coordinate with client therapeutic/legal team * Provide guidance to junior physicians on case assessment methodologies Periodic reports (as applicable) * Reviewing and/ or authoring of aggregate reports for medical content and consistency in accordance with client requirements and SOPs * Providing medical inputs into, and supporting the preparation of key regulatory documents including but not limited to, Periodic Benefit-Risk Evaluation Reports (PBRERs)/ Periodic Safety Update Reports (PSURs), Signal Evaluation Reports (SERs), Health Authority (HA) response documents, Development Safety Update Reports (DSURs), Clinical Overviews (COs), Addendum to Clinical Overview (ACOs), Health Hazard Evaluation reports (HHEs), etc. * Clinical Expert Statements and other documents as required * Review reports assessed by junior team members for accuracy and completeness Medical monitoring (as applicable) * Answering day to day medical and scientific questions, provide daily medical support to Parexel staff or site (investigator/study coordinator), as needed * Review and sign off adverse events report for accuracy and clinical importance, relationship to the study drug as well as for severity and seriousness; provide sponsors with periodic experience reports summarizing adverse events as required by the sponsor or authorities * Attend and present material (such as therapeutic area training), as requested, at internal and external meetings (such as investigator meetings) * Provide medical safety expertise to client per request * Review and sign off Data Management line listings (including adverse events, laboratory data, vital signs data, medical history, physical examination, concomitant medication, efficacy end points), establish the presence or absence of clinically meaningful trends and, if noted, follow up as appropriate with the project team, sponsor, investigator, and Regulatory Authorities * Review and sign off technical documents written by Parexel with respect to medically relevant matters with particular attention to those relating to patient safety * Review coding of adverse events, medical history and concomitant medications for accuracy and consistency * Review of patient profile report as needed * Provide support for the preparation of clinical protocols, integrated clinical and statistical summary reports, journal articles, and other documents for clients/sponsors in conjunction with clients/sponsors or in conjunction with other Parexel departments * Attend and present material as requested, at internal and external meetings (e.g., investigator meetings, therapeutic area training, Regulatory Authority meetings) Literature review (as applicable) * Review of literature for product safety assessment and potential safety issues * Expert in reviewing literature references including triaging, summarizing and providing MAH comments for aggregate reports and for various signal management activities CSR Narratives (as applicable) Provide medical guidance to safety staff during the case processing cycle * Provide input as necessary to Feasibility Studies, Data Monitoring Committees (DMCs), Clinical Endpoint Committees (CECs) * Provide medical input into Pharmacovigilance workflows and projects as required * On an as-needed basis, provide support in mentoring or training of new hired physicians Signal Detection and Management (as applicable) * Perform signal detection activities in accordance with client conventions/SOPs and within pre-decided timeframes. Perform medical assessment of safety alerts obtained from data mining activities * Perform signal validation activities * Author/review SERs. Perform case analysis, review literature summaries, check draft for medical and scientific accuracy and cohesiveness * Author/review responses to HA requests and other safety documents * Providing oversight and relevant inputs to Medical Writers (MWs) authoring SERs, Signal validations etc. * Managing safety signals on project specific tools (e.g., Signal Tracking System, Signal management tools, etc.) * Contribution to Safety Management Team (SMT) meetings: Data analysis/ review, content creation, presentation/ facilitation, drafting of meeting minutes * Training and mentoring junior team members on signal detection methodologies Brand safety Physicians (as applicable) * Contribute to Pharmacovigilance and Risk Management planning for designated products by preparation of safety surveillance strategy, and highlighting and tracking potential issues * Support the preparation and maintenance of Risk Management Plans * Prepare and review periodic safety reports (PBRER/PSUR, DSUR, European union renewal, HHE and other Annual Safety/addendum reports) in accordance with regulatory requirements and SOPs * Support the preparation and maintenance of safety sections of the Company Core Data Sheet, local labels and Development Core Safety Information (DSCI) * Coordinate safety activities between Drug Safety Unit/team and internal and external partners * Conduct/support signal detection and evaluation according to SOPs and guidelines * Prepare safety assessments, SERs, as necessary, for potential signals or issues (product quality) * Perform review and summarization of literature citations including epidemiology background research * Provide safety content review of clinical protocols, study reports, Investigators Brochures, and other related documents * Contribute to regulatory agency submissions (Investigational new drug applications, new drug applications, Marketing authorization applications, Variations and Renewals) by reviewing safety data and preparing relevant sections of the filing documents and submission packages * Participate in or provide input for Drug Safety Monitoring Boards or independent monitoring committee meetings, as applicable Therapeutic Area Expert (as applicable) * Serve as a subject matter expert within the designated Therapeutic Area, providing specialized knowledge to support drug safety initiatives and decision-making processes * Collaborate with the TA Lead to implement strategic plans and enhance the overall expertise within the Therapeutic Area * Contribute to the development and delivery of targeted training programs, elevating the knowledge base of fellow physicians and cross-functional teams * Actively participate in internal and external scientific forums, representing Parexel's medical expertise through presentations, publications, and thought leadership activities * Apply deep therapeutic knowledge to optimize pharmacovigilance processes, ensuring best practices are followed and continuously improved * Mentor junior physicians within the TA, fostering their professional growth and encouraging their contributions to the field * Support the TA Lead in identifying emerging trends and potential opportunities for innovation within the Therapeutic Area * Engage in cross-functional projects, offering expert guidance to enhance the quality and efficiency of drug safety assessments Skills: * Experience in clinical medicine (general or specialist qualifications) which is expected to be kept up to date * Demonstrated success in technical proficiency and scientific creativity * Ability to work on complex tasks requiring in-depth evaluation * Good knowledge of drug safety and the drug development process * Ability to exercise judgment within broadly defined practices and policies * Good presentation and verbal/written communication skills * Good interpersonal skills * Client focused approach to work * Computer proficiency, an ability to work with web-based applications and familiarity with the Windows operating system and Microsoft Office apps * An ability to comprehend various regulatory or client requests and be able to strategize a handling approach * Experience mentoring junior team members * A flexible attitude with respect to work assignments and new learnings * An ability to manage multiple and varied tasks with enthusiasm and prioritize workload with attention to detail * An ability to assess the clinical relevance of medical data and to interpret its clinical meaning is essential * A willingness to work in a matrix environment and to value the importance of teamwork * Strong knowledge of international drug regulation including ICH GCP, GVP, and all other applicable regulations and guidelines Knowledge and Experience : * US Board Certification/board eligibility or regional equivalent for Canada * 3 - 5 years previous experience in pharmacovigilance and/or medical monitoring is required. * Previous CRO experience is highly desirable, but individuals with relevant experience as a Patient Safety/Drug Safety Physician within Industry will also be considered. * Good knowledge/understanding of medical terminology * Relevant experience in pharmacovigilance/ Drug Safety/ Clinical Practice Education: * Bachelor of Medicine, Bachelor of Surgery (MBBS) / Doctor of Medicine (MD)/ Medically qualified from an acknowledged Medical School * Completion of at least basic training in clinical medicine (residency, internship etc.) This role offers the flexibility to work from home in either the US or Canada. #LI-KS1 #LI-REMOTE EEO Disclaimer Parexel is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to legally protected status, which in the US includes race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

EBSCO Information Services (EBSCO) delivers a fully optimized research experience, seamlessly integrated with a powerful discovery platform to support the information needs and maximize the research experience of our end-users. Headquartered in Ipswich, MA, EBSCO employs more than 2,700 people worldwide, with most embracing hybrid or remote work models. As an AI-enabled service leader, we thrive on innovation, forward-thinking strategies, and the dedication of our exceptional team. At EBSCO, we're driven to inspire, empower and support research. Our mission is to transform lives by providing reliable and relevant information - when, where and how people need it. We're seeking dynamic, creative individuals whose diverse perspectives will help us achieve this global, inclusive mission. Join us to help make an impact. Your Opportunity The Critical Care Clinical Editor will be responsible for supporting the Section Editor in overseeing the development and maintenance of high-quality content within the critical care domain, applying both clinical knowledge/experience and principles of evidence-based practice. The candidate must have the ability to analyze and critically appraise medical, nursing, and allied health research and literature, write clinical topics, and edit work produced by the clinical editorial team. Direct patient care experience and proficiency in systematic literature searching are required. What You'll Do * Write new clinical content in several formats for point-of-care tools. * Keep library of current clinical content up to date and relevant * Take initiative to identify areas of potential product development * Make decisions in consultation with the Section Editor that affect larger groups and more junior team members * Serve as content specialist within specific content domain(s), facilitate topic enhancement and development, perform systematic literature surveillance, and regularly review content collection * Support culture of teamwork and writer development through effective editing and feedback * Maintain quality of content and participate in quality initiatives * Project co-manage/co-lead editorial tasks/initiatives as required with Section Editor or Editor-in-Chief * Other duties as assigned by supervisor About You * Bachelor's degree or higher in nursing * Nursing licensure current and in good standing * Direct patient care experience in critical care setting. Experience in emergency setting a plus * 2 years of writing experience related to medical or scientific content * Demonstrated understanding/use of principles of evidence-based practice and health information technology to support clinical decision making * Demonstrated ability to extract relevant clinical information from research and write clinical content concisely, exercising judgment to produce content with minimal errors * Ability to self-manage multiple priorities within deadlines and report on work produced * Knowledge of PubMed, CINAHL search strategies * 2 years' experience with MS Office Suite including Word (with use of track changes) and Excel * Understanding of business process and policies to solve problems, self-motivated to look for solutions What Sets You Apart: * Advanced degree in a healthcare-related field * Specialty certification current and in good standing * Experience assessing evidence and performing critical appraisal * Statistical skills sufficient to analyze clinical relevance of all study types * Demonstrated leadership qualities, such as initiative and a strong work ethic * Demonstrated interpersonal skills such that feedback is effectively and constructively given and received * Motivated self-learner with focus on team success * Proficiency with specific Dynamic Health processes may serve in lieu of minimum required qualifications * Experience with content management systems and project tracking programs (e.g., Oxygen, monday, Distiller) Pay Range USD $68,070.00 - USD $97,240.00 /Yr. The actual salary offer will carefully consider a wide range of factors including your skills, qualifications, education, training, and experience, as well as the position's work location. EBSCO provides a generous benefits program including: -Medical, Dental, Vision, Life and Disability Insurance and Flexible spending accounts -Retirement Savings Plan -Paid Parental Leave -Holidays and Paid Time Off (PTO) -Mentoring program And much more! Check it out here: We are an equal opportunity employer and comply with all applicable federal, state, and local fair employment practices laws. We strictly prohibit and do not tolerate discrimination against employees, applicants, or any other covered persons because of race, color, sex, pregnancy status, age, national origin or ancestry, ethnicity, religion, creed, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, training, promotion, discipline, compensation, benefits, and termination of employment. We comply with the Americans with Disabilities Act (ADA), as amended by the ADA Amendments Act, and all applicable state or local law. Not seeing the perfect job? Join the EBSCO talent community to receive updates on new opportunities that align with your skills and interests - register using the links below: Experienced Talent Community () Early Career/Intern Talent Community Location US-Remote ID 2026-2007 Category Medical Products and Services Position Type Full-Time Regular Remote Yes

The Talent Acquisition Specialist plays a critical role in attracting and hiring top talent across JP Cullen's corporate and project teams. The ideal candidate is a hands-on recruiter with a strong sourcing background who thrives on building talent pipelines and delivering an exceptional candidate e

The Project Control Specialist IV is responsible for implementing and executing project controls across large-scale construction initiatives. Job Title: Project Control Specialist IV. Provide guidance on project management systems and tools, including scheduling and document control platforms.

Job DescriptionSalary: 65,000k -75,000k Technical Support Specialist I & Employee Owner Wanted!! Tormach, a 100% employee-owned CNC Machine Tool company, caters to the DIY, R&D, entrepreneur, education, and professional markets, selling affordable CNC machine tools and accessories. Our products are engineered in North America, and at our HQ in Madison, WI. When you first saw a CNC machine, were you hooked? Do you watch machining videos on YouTube? Are you mechanically inclined, with an interest in engineering, and do you love to geek out over technical details? If so, this job is for you! Are you able to support machine setup and troubleshoot with customers on their Tormach machinery, while improving processes, and collaborating with internal and external folks? Then we need you!!! Can you work with the customer to define their needs, identify business opportunities, and teach them along the way? AWESOME! You will play a crucial part in ensuring customer satisfaction and equipment performance! Your Essential Functions Provide technical support to customers setting up new equipment and installing accessories Assist customers with troubleshooting problems on existing equipment Document details of interactions with customers for reference and continuous improvement Project work based on manager or team directives Your Strengths Ability to work independently and follow verbal and written instructions Strong attention to detail and physical acuity for troubleshooting machinery Proficiency in G and M Codes used in CNC mill, lathe, and router operations Knowledge of speeds and feed in machining processes Ability to troubleshoot electrical and mechanical issues in CNC equipment Excellent communication skills to work effectively with customers of varying skill levels Proficiency in the Microsoft Office ecosystem Familiarity with providing technical support via telephone, email, or video call What YOU Do Operate in a professional office environment with a hybrid approach to remote work In-office work is required as the job demands, with scheduled collaborative days and onboarding phases Spending time in the R&D area to inspect equipment, which may require lifting (up to 50 lbs.), bending, and kneeling, while on the phone with customers Full-time position with work hours from Monday through Friday, 8 a.m. to 5 p.m Some weekends and evenings may be required for project-based work or shows What YOU Bring Minimum of a 2-year technical degree in CNC machining, programming, and/or robotics Bachelors degree in industrial technology, manufacturing, or relevant experience preferred Strong math skills Minimum of 2-3 years of CNC machining, preferable in Programming, Setup, & Fixturing Broad experience with other manufacturing processes Experience troubleshooting and repairing equipment Experience: Mechanical knowledge: 3 years (Preferred) CNC milling machine repair: 3 years (Preferred) Electrical troubleshooting: 2 years (Preferred) Ability to Relocate for this Full Time, Hybrid Remote position: Madison, WI 53718: Relocate before starting work (Required) Total Rewards: Medical, Dental, Vision, Life, LTD, STD, 401k, PTO, Holidays, Flex Schedule, ESOP, Voluntary benefits, SWAG Read more at: .

Job DescriptionDescription: Enhance your career at raSmith as a LiDAR & 3D Modeling Specialist/Survey CAD Technician in our Survey Services division and discover why we’re ranked #2 as a Top Workplace. raSmith is a growing multi-disciplinary consulting civil and structural engineering and land surveying firm with over 45 years of experience. We work with clients on projects nationwide from our seven office locations in Wisconsin, Illinois, and California. Are you ready to contribute your talents to a variety of projects that positively impact communities across the country? Consider this opportunity: LiDAR & 3D Modeling Specialist / Land Survey CAD Technician - Primary Responsibilities: • Static and UAS derived LiDAR data collection in both interior and exterior environments, • Assisting with setting conventional survey control for static and UAS derived LiDAR data collection efforts, • Processing of static LiDAR data sets, including point cloud registration, QA/QC checks to survey control, and general preparation for data extraction, • Processing of UAS derived imagery to orthophotography, including QA/QC checks to survey control and general preparation for data extraction, • Processing of UAS derived aerial LiDAR data sets, including trajectory processing, QA/QC checks to survey control, point cloud data classification and general preparation for data extraction, • Data extraction from orthophotography and point cloud data sets, including 2D planimetric features, 3D topography, and BIM modeling (including architectural, structural and MEP elements), • Reviewing assigned project files for necessary materials and information to carry out project scope and drafting tasks., • Providing thorough analysis of field notes, legal descriptions, title easements, design plans, utility plans and construction layout notes., • Developing an understanding of surveying concepts, our company business and how surveying is integrated into plans and projects, Transportation Plats, Condominium Plats, Subdivision Plats, legal descriptions and other survey exhibits. raSmith has a strong history of maintaining a people-oriented culture that provides a great work-life balance and a highly competitive compensation and benefit package. We support and encourage professional development opportunities and provide career growth charts for our supervisors and employees. Specific benefits include: • Hybrid home/office-based environment, • Generous paid time off and 8 paid holidays, • Flexible work schedules, • Paid parental leave, • Medical/prescription drug, dental, and vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA) options, • Wellness programs for health insurance savings, • Identity Shield and LegalShield programs, • Life assistance programs, • Corporate wear reimbursement, • Employee referral bonus, • 401K plan with immediate employee participation and generous company match, • Tuition and professional licensure/certification reimbursement program, • Paid memberships to professional organizations, • Paid seminars and conferences, • A variety of mentoring and training programs, • Company picnics and seasonal events, • Social and team-building opportunities, • An Associates Degree in a related field or a Bachelor’s Degree in Surveying from a U.S. accredited college or university is preferred, • 5+ years of experience, • Knowledge of static and aerial LiDAR data collection, processing and data extraction preferred, • Knowledge of basic surveying methods, practices and techniques preferred, • Proficiency in AutoCAD, Civil 3D, and Microsoft Office products is expected, • Proficiency in MicroStation, TopoDOT, Leica Cyclone REGISTER 360 PLUS (or similar), Pix4Dmapper (or similar), and Revit (or similar) is preferred, • Attention to detail and self-initiative, • Strong organizational skills, • Some travel required

Job Description Eppstein Uhen Architects, Inc. (EUA) is seeking a Project Specialist to join our firm, with opportunities in multiple client and market types. This position is responsible for the technical development of a project; independently evaluates, selects, and applies architectural techniques, procedures, and criteria; uses judgment in assignments that have clear and specified objectives with a limited number of variables; assists with writing reports and generating information for specifications; reviews submittals and observes architectural features in the field; assists in the coordination of consultants; and works under the direction of a Project Manager. * Unlicensed / Pursuing Architectural licensure * Works hand-in-hand with the project architect and/or project manager * Understands architectural techniques and procedures * Has experience and knowledge in detailing, technical aspects of projects, and building systems * Has a history of experience in assembling project document sets * Exposed to a variety of responsibilities and scope in the development of project documentation * Has a proactive approach to projects and problem solving and can self-direct project work and tasks * Reviews submittals and assists in on-site observation, actively participates in the Construction Administration phase * Supports and coordinates with consultants * Exposed to and assists with specification sections * High degree of knowledge and skill regarding BIM software The Fine Print * Bachelors degree in Architecture or equivalent experience * Typically 2-10 years experience * Proficient in Revit preferred * Actively working towards licensure * The salary range for this position is $60,000 to $95,000 based on skills and experience

Job Description Sharpe Engineering & Equipment is seeking a Marketing Specialist to support and accelerate growth by developing, executing, and analyzing strategic marketing initiatives across the food & beverage industry. This role will strengthen Sharpe’s market presence through data-driven campaigns, digital strategy, content development, and brand positioning across process, packaging, automation, and compliance solutions. Working closely with Technical Sales, Business Development, and cross-functional teams, the Marketing Specialist will translate Sharpe’s technical expertise into compelling messaging that drives awareness, engagement, and lead generation. This position is a key contributor to Sharpe’s growth strategy and reflects our Core Values: Integrity, Collaboration, Responsibility, Commitment to Stakeholders, and People-Centric Focus. Key Responsibilities Marketing Campaigns & Digital Strategy • Plan, execute, and optimize marketing campaigns across digital, social media, email, and paid advertising channels., • Create and manage content calendars aligned with brand and sales goals., • Oversee social media strategy, posting, engagement, and performance tracking., • Conduct industry research to evaluate trends, competitive positioning, and customer behavior., • Track, measure, and report on campaign performance using analytics platforms., • Translate marketing data into actionable insights and recommendations for leadership., • Produce high-quality content including social media posts, blogs, presentations, trade show materials, and case studies., • Maintain marketing materials, ensuring accuracy, consistency, and alignment with brand standards., • Ensure consistent use of brand guidelines across all platforms and materials., • Support public relations, press releases, and trade publication submissions., • Support planning, preparation, and on-site execution for events, trade shows, conferences, and customer meetings, including attending and representing Sharpe as needed., • Work with Business Development to support lead generation and customer acquisition efforts., • Partner with leadership to ensure marketing strategies align with Sharpe’s growth priorities. Why Join Sharpe? At Sharpe Engineering & Equipment, you’ll join a people-centric organization where innovation, collaboration, and integrity shape everything we do from the solutions we design for the food & beverage industry to the way we support and develop our team. As a Marketing Specialist, you’ll have the opportunity to influence how Sharpe shows up in the market, elevate our brand story, and help drive meaningful growth. Your work will play a direct role in strengthening Sharpe’s reputation, expanding our visibility, and communicating the value of the engineering excellence we deliver every day. You’ll work alongside talented engineers, project managers, and business leaders who value creativity, continuous improvement, and fresh ideas. At Sharpe, marketing isn’t an afterthought, it's a strategic driver of our future. We empower you to bring new approaches, leverage data, and shape campaigns that make a real impact. If you’re seeking a role where you can contribute strategically, grow professionally, and be part of a team that truly values people, Sharpe is the place to build your career. Requirements What We’re Looking For • Bachelor’s degree in marketing, Communications, or related field, or equivalent experience., • 3–5 years of experience in marketing, digital marketing, or campaign execution (B2B or industrial required)., • Strong analytical skills with experience in reporting and evaluating metrics., • Proficient in digital platforms such as Google Analytics, LinkedIn Campaign Manager, CRM/marketing automation tools, and social media management tools., • Excellent written, verbal, and visual communication skills., • Strong project management skills with attention to detail. Sharpe Engineering offers a comprehensive benefits package designed to support your health, well-being, and work-life balance. Our benefits include paid time off (PTO) plus 10 paid holidays, a flexible work schedule, and medical, dental, and vision insurance. We also provide short-term and long-term disability coverage, as well as life insurance, helping ensure peace of mind for you and your family. Sharpe Engineering & Equipment is an Equal Opportunity Employer.

Job Description As a BIM Project Specialist, you will be responsible for supporting the design, coordination, and execution of Building Information Modeling (BIM) processes specifically for plumbing systems. You will work closely with engineers and designers to develop detailed Revit models, ensuring that mechanical, electrical, and plumbing systems are accurately represented and well-coordinated within the project. Your role will contribute to enhancing project efficiency, collaboration, and overall quality. As part of EUA, a fully integrated architecture and engineering firm, BIM coordination is crucial in facilitating seamless collaboration across disciplines. Our holistic approach to design requires accurate and efficient coordination between HVAC, plumbing, electrical, structural, and architectural systems, ensuring that all elements of a project are aligned from concept through to completion. Key Responsibilities • Plumbing Modeling: Create, manage, and maintain detailed Revit models for plumbing systems, from design development through to detailed documentation. Ensure that all models comply with industry standards and project specifications., • BIM Coordination for MEP: Lead coordination efforts between plumbing systems with other building systems. Facilitate and lead coordination and clash detection meetings with internal teams and external consultants using tools such as Navisworks and ACC BIM360. Ensure timely resolution of clashes and conflicts by working closely with all project stakeholders to deliver coordinated, conflict-free designs., • Design Support: Assist in the virtual design and layout of plumbing systems, providing support for system sizing, routing, and space management., • Standards and Quality Control: Ensure adherence to BIM execution plans (BEP), managing project-specific BIM standards for plumbing systems. Perform regular quality control checks on models to maintain accuracy and alignment with project goals., • Knowledge of EUA Standards: Ensure all plumbing models adhere to EUA's internal standards and best practices, maintaining consistency, sustainability, and accuracy across all projects. Your work will reflect EUA’s commitment to high-quality, integrated design and engineering excellence., • Training and Support: Provide technical support to engineers and designers on Revit and BIM processes related to plumbing systems. Conduct training sessions on best practices and advanced features in Revit., • Accurate and Coordinated MEP Models: Ensure that plumbing Revit models are fully coordinated with other building systems, free from significant clashes, and meet project requirements., • Improved System Design: Provide accurate and efficient design and coordination of plumbing systems, ensuring optimal performance, space utilization, and ease of installation., • Effective Coordination and Clash Resolution: Lead coordination and clash detection meetings, ensuring that all design conflicts are identified early and resolved efficiently. Streamline interdisciplinary collaboration to minimize delays and enhance project delivery., • Optimized BIM Processes: Continuously refine and optimize EUA’s BIM processes for plumbing systems, contributing to improved project timelines and quality outcomes., • Two- or four-year degree in Architectural Technology or Engineering Technology, • Unlicensed / May pursue designer certification. CPDT preferred but not required., • 5-10+ years of experience with Revit and BIM tools in a plumbing context., • Proficiency with Navisworks, Revit, Dynamo, and other relevant BIM software., • Experience leading coordination meetings, performing clash detection, and resolving design conflicts., • Knowledge of plumbing design principles, codes, and standards., • Strong problem-solving skills, attention to detail, and ability to work within multidisciplinary teams., • Excellent communication skills and the ability to mentor others on BIM/VDC processes related to plumbing., • Has a proactive approach to projects and problem solving and can self-direct project work, tasks, and process improvements., • Assists in on-site observation and documentation., • Pay range for this position is $70,000 to $95,000 depending on experience

A Project Architect/Senior Project Specialist is expected to have industry knowledge, technical skills, and soft skills to serve as a Project Captain role as needed on individual projects – directing & mentoring less experienced Team Members and assisting the Project Manager. A Project Architect/S

The Project Control Specialist is responsible for the implementation and execution of project controls related work on strategic construction projects. Prior experience in project controls of major projects or related experience. Responsible for the scheduling and cost functions of the project from

The Project Control Specialist is responsible for the implementation and execution of project controls related work on strategic construction projects. Title: Project Control Specialist IV. Responsible for the scheduling and cost functions of the project from the development phase through to final p

The Project Control Specialist is responsible for the implementation and execution of project controls related work on strategic construction projects. Monitors leading indicators of project risks and communicate to project team, as well as work to resolve the issue. Prior experience in project cont

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi