Technical support engineer jobs in Columbus, Ohio - Page 2Create job alerts

Job Description Salary Range for this position is $75k - $85k based upon experience and/or education with a 5% bonus potential GFS Chemicals is a family owned and operated business in Columbus, Ohio, serving customers worldwide since 1928. You will be joining an established, close knit family organization that has been proudly dedicated to quality, service, and innovation in the specialty chemicals market. GFS offers a comprehensive compensation package that includes a generous 401k, profit sharing plan, paid time off, 2:1 HSA match, company paid life insurance, medical, vision, dental, and much more. Apply now to learn more about GFS Chemicals. Let’s see if we have “Chemistry”! As a Process Engineer at GFS Chemicals, you will be a leader within the Fine Organics operation that provides input between process development laboratory, kilo lab/pilot operations, and commercial production planning. Your responsibilities will include: Responsibilities: • Maintains, reviews, and updates all batch preps associated with the Fine Organics division, • Publishes manufacturing Routes in D365, • Publishes batch prep instructions to each specific manufacturing Route in D365, • Seeks input from adjacent departments when necessary, • Continuous improvement leadership Schedules daily “Gemba” walks on the production floor to interview operators and follow work instructions, seeking opportunities for improvement and where additional detail is needed., • Identifies assets and processes where engineering improvements can be made, • Targets process safety and productivity improvement projects, • Prepares budgetary costing for suggested projects and reports to GM, • Acts as primary junction between R&D lab and commercial production plant, • Reviews R&D preps before manufacturing at commercial scale, • Replicates R&D preps in kilo lab or pilot plant. Translates R&D batch instructions to meet equipment needs., • Uses knowledge of chemistry and plant processes to challenge the R&D team to identify critical quality parameters during process development, • Provides technical support to Production Supervisor or Operations Manager, • Is a technical expert on process activities and equipment capabilities, • Offers advice and suggestions on scheduling, • Work orders / Repairs / Improvements, • Enters thorough and descriptive work orders for continuous improvement projects approved by the GM, • Coordinates and communicates with Engineering for continuous improvement projects, • Understands how to operate and navigate the automation control system to perform the following functions:, • Identify new opportunities for automation technology to reduce workload or operational complexity, • Inspections, • Audits Operator batch records for completion Qualifications • Chemical Engineering degree required., • Advanced degree in engineering or chemistry preferred, • 4-7 years of experience in batch chemical manufacturing, including process chemistry/R&D, • Read and comprehend written instructions related to chemical processes, • Proficiency in organic chemistry, process engineering and process safety. Ability to write instructions based on established or developmental batch prep for equipment of different sizes., • Proficiency in root cause analysis, • Basic project management skills, • Experience training new employees on established processes, • Ability to navigate, control, and read instructions with an automation control system, • Good organizational, housekeeping and inventory management practices, • Experience with ERP systems, Microsoft Office, and Sharepoint, • Problem solving/analytical and math skills, • Knowledgeable of hazardous waste handling and disposal, • Maintains a positive attitude toward work and others, • Works well under minimal supervision, • Experience in lean manufacturing systems such as Gemba Walks, Kaizen Events, 5S, etc. We offer competitive compensation and benefits packages, along with opportunities for career development and advancement. Join our team of dedicated professionals and contribute to the production of essential chemical building blocks for industries worldwide. Only qualified candidates will be contacted for further consideration. EEO/AA/M/F/Vets/Disabled No agency calls or emails please!

Job DescriptionDescriptionThe Mannik & Smith Group, Inc. (MSG) is a people focused, award-winning, full-service consulting firm that offers a wide array of services including civil and geotechnical engineering, environmental consulting, planning, landscape architecture, agriculture, surveying and construction support. Our talented staff of 650+ professionals deliver integrated planning, design, engineering and construction solutions to our clients from our offices throughout Ohio, Indiana, Michigan, Pennsylvania, West Virginia and Alabama. MSG is seeking a full-time Transportation Roadway Engineer to join our Transportation team! This is a hybrid role, based out of our Columbus, OH office. Key Responsibilities • Leading the preparation of transportation design plans/3D modeling for ODOT and other Ohio LPA transportation and/or municipal projects., • Performing and checking various design calculations including Drainage Design, Quantities, Maintenance of Traffic, and Pavement desig, • Performing various tasks as they relate to preparing a design package (special provision development, construction estimates, Bid packages, etc.) for milestone submittals to clients, • Providing technical expertise/guidance to junior staff, • Bachelor’s degree or higher in Civil Engineering, • EIT required; PE or proof of working towards PE highly preferred, • 5-9 years related experience, • Experience with Microstation required, • 401(k) w/ company match, • Health insurance w/ HSA option, Vision, Dental, Life, • Flexible schedule, • Paid time off, • Referral program, • Tuition reimbursement, • Catalytic Coaching - Employees draft a development plan aimed at improving contributions in their current job and increasing the potential for other opportunities. MSG is all about bringing out the best in people at work!It is the policy of our company to follow equal employment opportunity procedures in compliance with federal, state and local criteria. We will provide all applicants for employment, and all employees, with equal opportunity without regard to race, color, religion, national origin, age, sex, height, weight, marital status, arrest record, disability, pregnancy, sexual orientation, gender identity or expression, genetic information, military or veteran status, and/or any other protected classes covered by any local, state and federal laws. #LI-CO1

Job Description Join our Hazen team and make the world a better place, providing exceptional client service in all things water® and superior technical solutions for our clients. Hazen is a creative, employee-owned company with minimal bureaucracy where employees thrive. Hazen has outstanding opportunities for motivated, talented people that enjoy teamwork and collaboration, client service, and solving our clients’ most difficult challenges. You will be supported by multiple mentors on projects and local office leadership. Hazen and Sawyer is seeking a Construction Manager/ Resident Engineer (CM/RE) to support the construction of water and wastewater treatment facilities and conveyance facilities located in the central Ohio. The CM/RE will manage coordination, documentation, and inspection activities for various water and wastewater facilities and pipeline projects. Travel within the area may be required. Duties and responsibilities may include the following: • Conducting on-site observations, monitoring, inspection, and evaluation of construction activities of water/wastewater facility projects., • Managing and preparing requests for proposals, verifying material quantities, and reviewing payment applications., • Coordinating and communicating with multi-discipline Hazen teams, owner, contractor, and third-party inspection/testing firms., • Reviewing and interpreting Contract Documents including project specifications and drawings., • Verifying and tracking work in accordance with approved shop drawing submittals., • Assisting in the processing and review of RFIs and shop drawings prepared by the Contractor., • Preparing sketches and assembling data for the Design Engineer's use., • Observing Contractor performance and compliance with safety requirements., • Assisting and coordinating with project start-up, testing, checkout, and training activities., • Coordinating and facilitating communication between the Contractor, the Design Engineer, the Facility Managers, and the Owner., • Reviewing Contractor’s schedules, monthly pay estimates, and managing the review of change orders., • Using cloud-based software for project documentation such as PROCORE, Unifier e-Builder, Autodesk Construction Cloud, etc., • Interfacing with clients and performing client management activities., • Assisting Hazen engineering design teams to provide constructability reviews and VE reviews., • 10+ years relevant construction experience in heavy construction, mechanical and electrical construction, preferably in the water/wastewater industry, • Familiarity with construction methods typical of civil, structural, and mechanical engineering, and construction materials testing., • Applicant must have a valid driver's license and clean driving record., • Good verbal and written communication skills, • Strong organizational and problem-solving skills., • Able to easily move around active construction site safely and effectively., • Basic computer skills (Microsoft Office Suite) are required and the ability to learn construction specific software use (i.e., Autodesk Construction Cloud, Bluebeam)

Job Description Are you an experienced Civil Engineer looking to make a significant impact in a dynamic market? Join our Columbus, OH; Cincinatti, OH; Lexington, KY; or Indianapolis, IN Aviation team and play a pivotal role in driving growth and innovation. As we rapidly expand our footprint, you'll have the unique opportunity to lead high-profile projects, shape strategies, and work with a dynamic team that's passionate about excellence. We offer the autonomy to steer your projects from design to completion while being part of an environment that values creativity, collaboration, and continuous improvement. If you're ready to take on new challenges and be a key player in our success, we want to hear from you! Crawford, Murphy & Tilly (CMT), named one “Of Zweig Group’s “Best Firms to Work For.” is a consulting firm with a team of engineers, planners, and other related design professionals that is actively seeking to fill a full-time position in our Columbus or Cincinnati, OH office. The selected candidate will have demonstrated leadership qualities, the ability to work as a team member or independently, the capacity to learn new skills and areas of expertise, and the desire to assist in establishing and growing our aviation business. Duties & Responsibilities: • Planning, design, and construction of civil & transportation projects focused on Aviation development, • Perform and lead design tasks or projects including the supervising and directing of junior staff, • Typical projects require preparation of bidding documents (plans & specifications) including horizontal and vertical layout, site development, grading, drainage, pavement design, marking, signage, erosion control, coordination with other disciplines, water & sanitary utilities, quantity takeoffs, cost estimates, and construction scheduling, • Support the client manager in providing service to and developing relationships with existing aviation clients, • Perform project management and coordination of multi-disciplined tasks necessary to implement projects for clients in our aviation group, • Perform, assist, or oversee construction-related tasks including on-site construction observation and project engineering, • Assist in business development activities including prospective client outreach, submittal preparation, and community engagement Position Requirements: • A Bachelor’s degree in Civil Engineering is required. A Master’s degree in advanced studies will be recognized in the evaluation process, • Minimum five (5) years of civil engineering experience with demonstrated technical design & construction expertise in transportation, civil site development, and civil infrastructure projects, including geometric design, grading, drainage, pavements, utilities, quantities, engineering reports, and specifications. Aviation experience is preferred but not required., • Demonstrated strong interpersonal, verbal, and written communication skills will be preferred, • Must have Professional Engineering License, • Licensed Professional Engineer in Ohio, KY, or IN is preferred, • Previous business development experience preferred, • Staff development, supervision, and/or management experience preferred, • Demonstrated skills and a working knowledge of AutoCAD for use in civil & site design projects, • Skill using Civil 3D for site modeling, design, and analysis is preferred, • Interest in experiencing a variety of assignments is important, • Must be willing to accept periodic out-of-town travel assignments to meet project demands, • Acceptable driving record and valid driver’s license Who is CMT? CMT is recognized as a leader in delivering solutions across the entire infrastructure lifecycle, providing our clients with services across the spectrum of planning, design, construction, technology, and funding strategy. We design roads, bridges, and trails that connect people together, and we devise solutions that provide clean water for people and the environment. We also design sites and buildings, as well as solve complex challenges at some of the biggest airports in the country. For over 75 years, our team of engineers, planners, and consultants has delivered a trademark brand of excellence and value to those we serve. CMT has been honored as the Top Engineering Design Firm in the Midwest by Engineering News Record and was recently named among Zweig Group’s “Best Firms to Work For.” CMT’s success has been a direct result of enabling our people to pursue their passions and grow as professionals, while also maintaining an appropriate work-life balance centered around flexibility. Through innovation and a passionate pursuit of excellence, our team of engineers, planners and other related design professionals are driven to help our clients achieve the highest value possible for the infrastructure they build and manage. Together we work to make our communities more livable and sustainable. A firm with approximately 500 employees and 25 offices in 9 states, CMT is growing fast and continuously creating opportunities for our employees. CMT is committed to individual opportunity and the professional development of our employees. This position offers an opportunity to take that next step helping reach your career goals and personal potential. ADDITIONAL INFORMATION Please visit to learn more about some of the benefits CMT offers! Equal Employer Opportunity including individuals with disability and protected veterans Visa sponsorship is available for this position.

Job Description T&M Associates is looking for a Principal Water Resources Engineer to join our growing Columbus, Ohio office. This is a hybrid role, offering flexibility with a balance of remote work and in-office collaboration. We’re seeking an experienced professional with 7+ years in water and wastewater planning, design, and construction administration, ready to lead impactful projects and guide multi-discipline teams. Qualifications • Bachelor’s degree in Civil, Environmental Engineering, or a related field (required), • 7+ years of progressive experience in water/wastewater process, treatment, and distribution projects, • 2+ years of project management experience preferred, • Ohio Professional Engineer (PE) license strongly preferred, • Proficiency in AutoCAD and Civil3D desired, • MS Office and MS Project experience required, • Lead planning and design for municipal and industrial water/wastewater infrastructure projects, • Manage budgets, schedules, deliverables, and technical documentation from design through construction, • Oversee complex projects, including Design Reports, bidding, and construction phases, • Develop proposals, budgets, and technical strategies for new opportunities, • Build and maintain strong client relationships through active engagement T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental, and vision), a 401(k) with company match (also a Roth option), paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description T&M Associates is seeking a highly motivated Group Manager to lead and expand our Mechanical, Electrical, and Plumbing (MEP) Practice in the Midwest Region. This position is based in our Columbus, OH office and offers a hybrid work arrangement, combining remote work with in-office collaboration The Group Manager will play a key leadership role in managing team operations, ensuring project excellence, and supporting strategic business growth. With support from our local disciplines and a well-established MEP Practice in other regions, this individual will be instrumental in strengthening client relationships and driving new opportunities across both public and private sectors. Key Responsibilities: • Lead, mentor, and manage a team of mechanical, electrical, plumbing, and fire protection engineers., • Oversee day-to-day team operations to ensure high-quality, timely project delivery., • Supervise design and construction administration tasks across disciplines., • Serve as the primary liaison between clients and internal project teams., • Participate in strategic business planning and assist with project selection., • Drive continuous improvement in technical execution and team processes., • Ensure all work complies with applicable codes, standards, and industry best practices., • Monitor group performance against departmental KPIs and support overall business goals., • Foster and maintain client relationships to support ongoing and future business., • Identify and pursue new business development and acquisition opportunities., • Bachelor’s Degree in Mechanical Engineering or a related field is required., • 10+ years of experience in mechanical engineering, including MEP/facilities design., • Professional Engineer (P.E.) license preferred, • Proven project management and team leadership experience., • Strong understanding of industry codes, standards, and compliance., • Proficient in AutoCAD and Revit; hands-on design experience preferred., • Excellent communication, organizational, and interpersonal skills. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $145,000-174,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description ABOUT ITC MANUFACTURING: Our Why: Pride in Every Weld. Our purpose is simple - to build trust with relentless quality and to empower every person by turning hard work into lasting opportunity. Our Mission: We engineer and manufacture precision wire mesh solutions that meet the highest standards of quality, safety, and performance. By aligning our expertise with each customer’s specific needs, we build trust through consistent delivery, proven durability, and pride in every weld. Our Core Values: • Craftsmanship – We take pride in precision and quality - every mesh we make reflects our skill and standards., • Care – We value people and processes, protecting safety, promoting sustainability, and creating satisfaction at every step., • Trust – We build lasting relationships through consistent quality, transparency, and reliability., • Accountable – We own our work, honor our commitments, and deliver results you can count on., • Competitive pay, • Comprehensive medical, dental, and vision insurance plans, • 100% employer paid medical option available, • Short- and long-term disability insurance, • Life and AD&D insurance, • 11 paid company holidays, • Paid vacation time, • Paid sick leave, • 401(k) retirement plan with an employer match of up to 4%, • $5,000 undergraduate & $15,000 graduate annual tuition reimbursement, • In-house career growth development programs SHIFT: 3rd Shift Friday-Sunday 7pm-7:30am *Training will be Monday-Thursday 7am-5:30pm for 8-10 weeks POSITION SUMMARY Responsible for the safe and efficient operation, set-up, and maintenance of mine mesh wire welding and forming machinery. This role includes handling heavy-gauge wire, ensuring product strength and dimensional accuracy, and supporting production needs specific to mesh used in mining applications such as ground support and reinforcement. PRIMARY RESPONSIBILITIES • Operate and monitor mine mesh welding and forming machines to produce heavy-duty mesh panels used in mining and tunneling applications., • Perform machine set-ups and tooling changes to accommodate various mesh sizes, gauges, and configurations specific to mine mesh standards., • Conduct start-up, in-process, and final quality checks to ensure weld integrity, panel dimensions, and wire spacing meet strict mining safety standards., • Troubleshoot issues related to wire feed, weld consistency, alignment, and material flow., • Maintain a clean, organized work area and ensure tools, dies, and spare parts are properly stored., • Accurately complete production logs, quality checklists, and batch records., • Read and interpret production work orders, blueprints, and mine mesh specifications., • Assist with loading and feeding large wire coils; coordinate with material handlers as needed., • Conduct daily and scheduled preventive maintenance on mine mesh machinery., • Train other team members on the safe and proper use of mine mesh equipment., • Strictly follow all OSHA safety protocols, including Lockout/Tagout (LOTO)., • Work collaboratively with production leads and support staff to meet delivery timelines and quality standards., • Contribute ideas for process improvement, equipment efficiency, and safety., • Perform additional duties as assigned by leads, coordinators, or management. KNOWLEDGE AND SKILL REQUIREMENTS • Minimum 3 years of experience operating heavy-duty mesh welding/forming equipment, preferably in mining or structural mesh manufacturing., • Strong mechanical aptitude and ability to make machine adjustments and minor mechanical repairs., • Familiarity with high-tensile wire, mesh panel layout, and mine safety reinforcement products., • Proficient with measurement tools including calipers, micrometers, and tape measures., • Ability to interpret mine mesh blueprints and technical drawings., • Able to lift up to 60 pounds, bend, and work on your feet in a production environment., • Comfortable working around large, automated machinery and computer-controlled systems., • Self-driven, detail-oriented, and capable of working both independently and within a team., • Strong attendance and punctuality required., • Welding background and/or formal mechanical training is a plus. An aptitude test is required for selected candidates.

Job Description ELIQUENT Life Sciences is the leading global consulting firm providing solutions to life science companies researching, developing, and manufacturing innovative products to serve patients and respond to public health challenges around the world. ELIQUENT is committed to serving clients’ needs with extensive expertise, unwavering integrity, and strategic insight in a manner that supports availability of safe, effective, and high-quality drugs, biologics, and medical devices. For more information, please visit our website at eliquent.com. We are seeking a highly skilled Calibration Specialist to join our consulting team. The CQV Engineer will play a crucial role in calibrating instruments and setting up calibration processes for our clients in the pharmaceutical, biotechnology, and medical device industries. The ideal candidate will possess strong technical expertise, communication skills, and a thorough understanding of regulatory requirements. Key Responsibilities: • Perform calibrations following written calibration procedures., • Accurately complete calibration paperwork, including work orders and logbooks in accordance with existing company policies, procedures, Current Good Manufacturing Practices, health, and safety requirements., • Perform calibration activities on all types of instrumentation, which include: pressure gauges, controllers, recorders and switches, temperature recorders, switches, controllers and indicators, resistivity meters, recorders and controllers, timers, flow, speed and electrical devices, Gauge blocks, Go/No-Go gauges, calipers, Humidity probes., • Maintain calibration documentation that demonstrates each instrument’s NIST Traceability., • Maintain and troubleshoot facility standalone instrumentation and control systems., • Review and update calibration procedures based on field experience., • Identify opportunities for improving Calibration program., • Respond to customer requests and/or alarm conditions., • Assess instrument failures/breakdowns, systematically identify problems, and restore to operation., • Accurately document repair activities., • Responsible for calibration data entry and maintaining calibration database., • Responsible for maintaining calibration lab., • Responsible for sending instruments out to vendors as well a scheduling contractors to come on-site for scheduled and/or on demand calibrations., • Support and assist in the execution of validation activities, which include:, • Controlled storage: temperature distribution qualification., • Maintenance validation: autoclaves, depyrogenation tunnels, automated visual inspection equipment., • Equipment validations as required., • Support Quality Assurance investigations of instrument failures/breakdowns. Requirements • BS in Engineering, Science or equivalent technical degree., • 2-5 years experience with calibration and metrology in a GMP environment., • BMRAM or other calibration software experience preferred., • Solid understanding of GMP regulations and industry standards., • Excellent communication and interpersonal skills., • Ability to work independently and collaboratively in a dynamic team environment., • Strong analytical and problem-solving skills with attention to detail., • Understand and translate requestor’s strategies into plans, and be able to drive the project to completion Physical Environment and Requirements • Physically able to wear cleanroom/protective gowning and equipment, including but not limited to gowning, goggles, face shields, respirators, and protective gloves. PPE and Respirators are essential for the health and safety of employees., • Employee must be able to occasionally lift and / or move up to 50 pounds., • Employee must be able to move various calibration equipment and tools., • Employee must be able to occasionally sit, kneel or stand for extended times. What We Offer: • Competitive Compensation: Attractive salary and comprehensive benefits package for full-time and part-time employees, including health, dental, vision, and life insurance, a 401(k) plan with employer match, a generous paid time off policy, and additional perks. Compensation is commensurate with professional experience., • Career Development: Opportunities for professional growth and advancement within a supportive and innovative environment., • Work-Life Balance: Flexible work arrangements and a commitment to maintaining a healthy work-life balance. Eliquent Life Sciences is proud to be an Equal Opportunity Employer, committed to employee diversity.

Job Description Job Summary Construction Program Managers oversee the strategic planning, management, and execution of industrial construction projects of food and beverage production facilities, ensuring they are delivered on time, within budget, and to the highest quality standards, while also fostering strong client and stakeholder relationships. Construction Program Managers will have an oversight of large projects while directing, supervising, and mentoring the onsite construction managers. Client Relations Responsibilities • Manage and foster relationships with clients by understanding their needs by listening actively and addressing feedback honestly and transparently., • Review project schedule, work progress, and budget with the client., • Communicate project progress, issues, and updates to the client proactively., • Set and manage project timelines, deliverables, and expectations with the client., • Ability to adapt to changing client needs and expectations, while maintaining a professional approach., • Build trust and rapport with our clients by delivering expectations and driving value., • Oversee and direct site-based construction managers, field administrators, office based technical staff from conception to completion and provide direction to safety. This includes reviewing and monitoring team members’ work, mentoring, and evaluating performance, fielding questions and providing guidance to complete tasks, and being available to help manage deadline conflicts as needed., • Provide valuable field input to the office project manager regarding project accounting, budgeting, and cost management., • Other tasks as assigned., • Work with the overall office project manager on developing and updating project scope, budget, and schedule., • Develop relationships with inspectors to ensure adherence to project permit requirements., • Change order and general construction administration., • Manage third party testing, inspection, and relationships., • Jobsite walk / audits to ensure project is progressing and drive efficiently., • Support and coordinate facility start up., • Develop construction reports to focus on client executives., • Work with project controllers and office project managers in responsibilities involving supplier invoices and client billing., • A bachelor’s degree in construction science, building science, construction engineering or a related field is strongly preferred, • 15+ years of progressively responsible job site experience working on industrial building projects (strongly preferrable in the Food & Beverage Industry)., • 15+ years of working with sub-contractors (motivating them, working through sub-contractors’ issues, etc.), • Demonstrated ability to drive project schedules., • 15+ years of building or sustaining client relationships., • Strong technical, organizational, managerial, and communication skills involving multiple disciplines, drawings and being competent using 3D models., • 7+ years of Design-build experience (preferred)., • Refined, polished, and professional in all forms of communication., • A fundamental understanding of all phases of construction and an ability to read and interpret construction documents and schedules, specifically with MS Project., • Meet Travel requirement – Up to 100% travel to projects throughout the USA and possibly Canada, • Prolonged periods sitting at a desk and working on a computer and prolonged periods of standing and walking around project sites with uneven surfaces., • Must be able to traverse and inspect all areas of jobsite in all types of weather; this may include walking, climbing, reaching, bending, crawling, or stretching., • Exposure to characteristic construction site dangers., • Must be on-call to address delays, emergencies, bad weather, and other issues at the jobsite. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Company Overview Full service mid-sized engineering consulting firm located in Columbus, Ohio offering services to industrial and commercial clients nationwide. The majority of the industrial services have been provided to clients in the food, beverage, pharmaceutical and manufacturing industry requiring process and facility design, construction guidance, and start‐up assistance. A project driven work environment that is fast paced yet friendly and casual while focusing on client satisfaction. The client base is 90% industrial and 10% commercial work. Responsibilities We are looking for a motivated and detail-oriented Structural Engineer with 5+ years of experience in commercial and/or industrial building design. A good candidate is a proven self-starter with strong technical skills, able to recognize client needs and develop effective solutions. This Structural Engineer will be responsible for performing duties on assigned projects including: • Perform structural design and analysis of steel, concrete, masonry, and wood structures, • Develop construction documents including drawings, details, and specifications, • Coordinate designs with other disciplines including architectural, mechanical, and electrical teams, • Perform field investigations and assessments of existing structures, • Review shop drawings, respond to RFIs, and provide construction administration support, • Participate in client meetings and provide technical guidance, • Ensure that work complies with applicable codes and standards, • Manage tasks to meet project schedules and budgets Requirements • Bachelor’s degree in Civil or Structural Engineering, • 5+ years of structural engineering experience on commercial/industrial projects, • Proficient in structural analysis and design software (e.g., RISA, RAM, STAAD), • Proficient in Microsoft Office, • Familiarity with Revit, Navisworks, and AutoCAD preferred, • Strong communication and organizational skills, • Willing to travel to client construction sites as needed, • Willing to work overtime as needed Benefits • We offer a fast paced, exciting open office work environment with a competitive compensation package including: Health Care Benefits, paid vacation, 401K, paid overtime, profit sharing and tuition reimbursement.

Genesis10 is seeking a Sr AWS Engineer for a 6-month hybrid contract to hire position with a leading client in Columbus, OH. Rate:60-70/hour Job Description: The Senior AWS Engineer serves as the technical lead for our FedRAMP Authorized (Moderate FISMA) cloud environment supporting our SaaS platform. The Senior AWS Engineer will translate security controls into infrastructure-as-code, maintain and evolve a Terraform-managed AWS stack, and implement a robust DevSecOps toolchain. This role will integrate tools, including Okta, Entra, Elastic Cloud, Qualys, SonarQube, Nessus, Cloudflare, and GitLab while optimizing AWS RDS performance. Additionally, this role is a hands-on leadership position requiring close collaboration across Compliance, Infrastructure, Development, and Product teams, as well as mentorship of a Junior AWS Engineer. Responsibilities: Designs and implements secure, highly available AWS environments using Terraform—emphasizing VPC (Virtual Private Cloud) design, IAM (Identity Access Management) least privilege, FIPS encryption, and network segmentation. Provisions, tunes, and maintains AWS RDS (SQL Server) with a focus on performance, backups, and high availability. Develops and maintains CI/CD pipelines in GitLab, integrating SAST (SonarQube), DAST (Qualys), vulnerability scanning (Nessus), and Terraform automation. Translates FedRAMP/NIST 800-53 Rev 5 security controls into technical safeguards; remediates findings and supports continuous ATO (Authority to Operate). Integrates SSO (Single Sign-On) and RBAC (Role-Based Access Control) using Okta and Entra across AWS, GitLab, Elastic Cloud, and related SaaS platforms. Operate Elastic Cloud SIEM and AWS GuardDuty; respond to alerts, coordinate incident response, and lead postmortem analysis. Mentors and supports the Junior AWS Engineer; conducts code reviews and champions DevSecOps culture. Defines SLIs (Service Level Indicators)/SLOs (Service Level Objectives), implements disaster recovery and backup strategies, and leads service improvement initiatives. Collaborates with stakeholders to convert regulatory and product needs into secure cloud capabilities; articulates security posture to leadership and clients. Participates in a rotating 24x7 on-call support schedule. Performs other related duties as assigned. Requirements: Bachelor's degree in computer science or related field (preferred). Relevant certifications strongly preferred: AWS Solutions Architect – Professional, AWS Security Specialty, AWS DevOps Engineer, CISSP or similar. 8+ years of experience in software or cloud engineering, including 5+ years designing and operating workloads on AWS. Deep expertise with AWS core services: VPC, IAM, ECS/EKS, Lambda, RDS, S3, KMS, CloudWatch, Security Hub, and Control Tower. Strong background in Infrastructure as Code (IaC) using Terraform—modules, state management, and CI-driven deployments. Experience provisioning, tuning, and maintaining AWS RDS (SQL Server). Solid foundation in both Linux and Microsoft Windows operating systems. Direct experience supporting at least one FedRAMP Moderate (or higher) authorized system, including audit preparation and evidence submission. Working knowledge of FedRAMP Moderate, NIST SP 800-53 Rev 5, and NIST SP 800-37. Experience mapping security controls, maintaining SSPs, POA&Ms, and delivering continuous monitoring artifacts. Hands-on experience with security tools such as Elastic Cloud SIEM, Qualys Cloud WAS, SonarQube, Nessus, and AWS GuardDuty. Ability to translate regulatory requirements into technical safeguards. Proficiency in GitLab CI/CD, including runners, pipelines, and GitOps workflows. Experience building security gates into CI/CD processes (SAST, DAST, vulnerability scans, Terraform automation). Automation-first mindset with fluency in at least one backend language (Python, Go, or Java) and scripting (Bash or PowerShell). Experience integrating and managing SSO solutions with Okta and Entra (SAML/OIDC, SCIM, MFA, RBAC policy design). Familiarity with fine-grained access control across AWS and SaaS platforms. At least two (2) years of experience mentoring or leading engineers. Strong communication skills—able to clearly explain technical issues to both technical and non-technical audiences. Excellent documentation skills (e.g., policies, procedures, architecture diagrams, audit artifacts). Excellent organizational skills and attention to detail. Strong analytical and problem-solving abilities. Proficiency with Microsoft Office Suite or similar tools. Must be eligible to obtain a government security clearance. Genesis10 – Contract & Perm/Direct Hire Ranked a Top Staffing Firm in the U.S. by Staffing Industry Analysts for six consecutive years, Genesis10 puts thousands of consultants and employees to work across the United States every year in contract, contract-for-hire, and permanent placement roles. With more than 300 active clients, Genesis10 provides access to many of the Fortune 100 firms and a variety of mid-market organizations across the full spectrum of industry verticals. For contract roles, Genesis10 offers the benefits listed below. If this is a perm-placement opportunity, our recruiter can talk you through the unique benefits offered for that particular client. Benefits of Working with Genesis10: • Access to hundreds of clients, most who have been working with Genesis10 for 5-20+ years. • The opportunity to have a career-home in Genesis10; many of our consultants have been working exclusively with Genesis10 for years. • Access to an experienced, caring recruiting team (more than 7 years of experience, on average.) • Behavioral Health Platform • Medical, Dental, Vision • Health Savings Account • Voluntary Hospital Indemnity (Critical Illness & Accident) • Voluntary Term Life Insurance • 401K • Sick Pay (for applicable states/municipalities) • Commuter Benefits (Dallas, NYC, SF) For multiple years running, Genesis10 has been recognized as a Top Staffing Firm in the U.S., as a Best Company for Work-Life Balance, as a Best Company for Career Growth, for Diversity, and for Leadership, amongst others. To learn more and to view all our available career opportunities, please visit us at our website. Genesis10 is an Equal Opportunity Employer. Candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. #DIG10-OH

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Columbus, OH Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The Senior Virtual Design and Construction (VDC) Engineer will become a strategic asset within a growing business unit and the key member of our project teams for the most creative builder in America. As part of VDC team you will be involved in a range of activities throughout the design-build cycle that are essential for a successful project delivery. These activities include support and implementation of Clayco’s Digital Practice Technology in a variety of tasks as they relate to design analysis, design process, pre-construction, construction, and the facility handover. This is a critical support role with opportunity to become one of our VDC industry experts. The Specifics of the Role • Provide assistance to design-build team to facilitate 3D and 2D coordination., • Liaison with the design team and project subcontractors through multitude of BIM centric activities., • Provide technical support for a range of application used in-house., • Assist Pre-Con with quantities extraction and scheduling., • Assist and coach the project teams in the use of companywide BIM best practices., • Coordinate 3D content modeled by others and model any content not provided., • Perform 4D virtual building analysis on model working closely with scheduling, project managers, and superintendents., • Perform 5D virtual building analysis in close collaboration with the estimating team., • Perform and document clash detection on virtual building model as well as assist in conflict resolution., • Perform material quantity take-off of building model for conceptual estimating purposes utilizing leading edge BIM technologies., • Manage model changes through design updates and as built conditions., • Serve as the information manager and content gatekeeper for the duration of project. Requirements • Bachelor's Degree in Architecture, Engineering, or Construction Management., • 3-5 years of experience in AEC industry, in particular MEP coordination., • Minimum 3 years of experience with VDC/BIM related processes., • Solid knowledge of construction principles/practices required., • Advanced proficiency with Autodesk Building Design Suite (Revit, Assemble Systems, AutoCAD, Navisworks), Structionsite, DroneDeploy, and BIM 360/ACC cloud-based technology., • Willing to travel and/or relocate to a job site. Some Things You Should Know • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco does., • We work on creative, complex, award-winning, high-profile jobs., • The pace is fast!, • This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? • 2024 Best Places to Work – Chicago Business Journal, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2024 ENR Midwest – Midwest Contractor (#1)., • 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2024 ENR Top 100 Green Contractors – Green Contractor (Top 5). Benefits • Discretionary Annual Bonus: Subject to company performance and individual contribution., • Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job Description The role of the Regional VisionNav AGV Technician is to proactively perform quality maintenance and repairs as scheduled on a route within their assigned Region, communicate and follow-up with our customers as well as their management team, schedule return visits to make follow-up repairs or resolve unplanned service events, and overall to ensure the equipment remains in service and our customers are informed. Technical aspects that involve the guidance system will require the AGV Technician to work and train with the Engineering Team for onsite resolution. The AGV Technician will not be responsible for calibrations and programming changes to the guidance system. The AGV Technician will assist in the remote resolution with issues involved concerning programming, software updates, and guidance system concerns. The AGV Technician will be responsible for doing everything possible to maintain equipment uptime to keep the equipment in service and will act as a liaison with the Engineering Team to ensure customer equipment uptime is achieved. New hires will be trained at our Corporate off in Lawrenceville, GA. Once the training is completed, our Technicians will be deployed to their assigned Region on a scheduled route. Ongoing training and support will be provided as required. Role requirements Include but not limited to: · Position requires a minimum of 5 years as a forklift technician · Must provide own tools to perform the required maintenance and repairs involved · Specialized shop tools will be provided by the company · Frequent travel is a must to support our customers and equipment · Great communication skills to include follow-up, proactive planning and maintenance practices · Possesses a “Can-Do” attitude with a positive and growth mindset · Self-Motivated, dependable, and punctual · Technology capable (laptop/tablet, apps, etc.) and willing to learn · Flexible and adaptable to seek out paths to resolve issues · Possesses high emotional intelligence, has a sense of urgency, can handle multiple tasks, organized, and capable of prioritizing · Must possess a continuous learning mindset with a culture building attitude 1. Maintenance & Repairs · Perform PM’s per the company provided AGV PM Checklist (e.g., oil changes, multiple adjustments required, battery inspections, etc.) • Troubleshoot, diagnose, and repair mechanical, hydraulic, and electrical issues. Electrical repairs would exclude programming involved with the guidance system. Bolt-on parts and calibrations would be performed by the Technician (training will be provided). An Engineer will work with the Technician from a programming standpoint where required, • Replace worn and faulty components (e.g., motors, brake assemblies, wheels and tires, etc.), • Maintain records of maintenance, service, and repairs performed, • Work with the Engineering Team to learn the Guidance System and under what conditions you will need to collaborate with Engineering to remotely perform programming pertaining to the Guidance System as required 2. Inspections • Conduct daily/weekly/Monthly AGV inspection checklist and safety checks per OSHA and/or VisionNav OEM guidelines, • Proactively identify potential issues before they lead to equipment failure. The quality of the PM is the foundation to drive out reactive repairs and issues for all stakeholders, • High Quality workmanship and work ethic with attention to detail ensures VisionNav equipment meet safety and operational standards 3. Electrical & Hydraulic Systems • Inspect and service electric componentry (wiring harnesses, connectors, etc.), batteries and connectors, amplifiers and controller connections, contactors, etc., • Test and repair hydraulic systems, hoses, pumps, fittings, etc., • Use diagnostic tools and software to ensure optimal performance 4. Tools & Equipment Use • Use a variety of hand tools, power tools, and diagnostic equipment, • Safe work practices are adhered involved in all aspects, • Read and interpret technical manuals, schematics, etc. 5. Documentation & Compliance • Maintain accurate service logs and repair histories via the work order system, • Complete work orders and inspection checklists, • Post time and parts used daily via the work order system, • Ensure compliance with OSHA, ANSI, and manufacturer safety standards are adhered to, • Punching in and out in accordance with company policy, • Completing the required company compliance objectives on time 6. Field Service (where applicable) • Travel to customer sites for scheduled and dispatched on-site service and repairs, • Communicate with your manager if anything changes to scheduled work, parts backorders, issues with the equipment, issues preventing us from keeping our customers supported, etc., • Adhere to customer safety compliance and work standards 7. Collaboration • Work with all internal and external stakeholders for the desired optimal outcomes, • Work with other internal and external teams to ensure everyone is in alignment, • Great communication is expected and a key aspect of operating at a professional level 8. Continuous Learning • Stay up to date with company development technology and processes, safety compliance and technical training, • Attend scheduled VisionNav technical and safety training classes. Certification levels and Safety Compliance are conditions of employment! 9. Soft Skills • Punctual and on time as scheduled, • Strong problem-solving and diagnostic skills, • Attention to detail and safety consciousness, • Good communication and customer service skills, • Ability to work independently or as part of a teamCompany DescriptionVisionNav Robotics is a leading global supplier of autonomous forklifts and intralogistics automation solutions. VisionNav autonomous forklifts utilise 5G networks, AI & machine learning, environment perception and servo control technologies to deliver reliable performances without human interference. VisionNav AGVs work on hundreds of facilities across the world, providing over 9m pallet storages, narrow-aisle operations, automated truck loadings, multi-layer cage stackings and other fully autonomous actions. Dozens of Fortune 500 companiesin automotive, food, petrochemical, e-commerce, 3rd-party logistics, pharmaceutical, and other key industries use VisionNav robots to make their operations safer, efficient, and future-proof.VisionNav Robotics is a leading global supplier of autonomous forklifts and intralogistics automation solutions. VisionNav autonomous forklifts utilise 5G networks, AI & machine learning, environment perception and servo control technologies to deliver reliable performances without human interference. VisionNav AGVs work on hundreds of facilities across the world, providing over 9m pallet storages, narrow-aisle operations, automated truck loadings, multi-layer cage stackings and other fully autonomous actions. Dozens of Fortune 500 companiesin automotive, food, petrochemical, e-commerce, 3rd-party logistics, pharmaceutical, and other key industries use VisionNav robots to make their operations safer, efficient, and future-proof.

Overview: M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission critical facilities, secure environments, complex infrastructure, and global enterprises. The company's capabilities include electrical, electronic security, telecommunications, life safety, automation and controls, audio visual, and IT systems. M.C. Dean is headquartered in Tyson's, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Why join M.C. Dean? Our people are inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. Clearance Requirement: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; Ability to obtain and maintain a Secret clearance. License/Certification Requirement: Journeyman or Master License in Electrical or Mechanical Mechanical applicants must possess an EPA Certification VMET (Verification of Military Experience and Training) is accepted if it reflects relevant electrical or mechanical experience and is approved by customer Responsibilities:Responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center is operating at peak efficiency. This involves both planned preventative maintenance of equipment, daily corrective work, and emergency response to emergent issues. The technician serves as an expert technical resource reporting to a program manager, interacting with Onsite Engineering Operations (OEO) and any third-party vendors. They are expected to be a singular focal point for all facility operations within a given data center and to support operated data centers. Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime. Meet all requirements of CET1. Utilize safe working practices; apply lockout/tagout, SDS, apply good housekeeping methods, etc. Utilize common administrative and office software. Read and interpret wiring diagrams, blueprints, floor plans, construction documents, mechanical riser drawings, OEM operating and maintenance instructions, job specifications, and MOP/SOP's. Use hand tools and test equipment to install, troubleshoot, and repair new or replacement parts for existing mechanical and electrical equipment covered under CET2 classified procedures, according to specifications and established safety guidelines, relying on MOP's, manufacturer's literature, and industry best practices to perform tasks under supervision, and ensures activities are logged in CMMS. Assist a CET3/4 technician with CET3 classified procedures (MOP/SOP) associated with the site/campus they are based, and transfer knowledge and train other technicians. Conduct daily walk-through of facility documenting parameters such as power availability, temperature and humidity, alarm status, etc. to be catalogued and compared for identification of discrepancies and trends. Be conversant in site-specific processes and procedures such as procedure creation and review standards, procedure instructions and templates, how to report an incident or outage, procedure execution, PM standards, CMMS standards and policy, work order and notification, as well as the use of SharePoint to access CE procedures and training content. Understand how to action all site primary and secondary EOP's, focusing on mastering the first responder role during an emergency. Fully conversant on how to complete drills associated with the site primary and secondary EOP's. Understand the function, purpose, nominal operating parameters, and how to operate/isolate and start up: MV/LV Distribution Boards, MV/LV Breakers, UPS, Generator, Batteries, STS, ATS, AHU, DX units, Chillers, Evap Washer Systems, CRAC Units, Fuel Systems, ASCO Systems, BMS System, EPMS System, and Fire Alarm System. Be conversant of the BMS and EPMS systems and the impact of any state change, capable of navigating the system, interpreting alarms, and able to perform controlled shutdowns/start-ups/equipment rotations. If applicable to the role, disable and enable fire alarm control panels and systems. Maintain maintenance records as required by City, State, and EPA regulations. Interpret building codes and local and federal regulations as they relate to installations and apply them as required by the site. Identify required materials and parts for maintenance and repair to facilitate procurement. Understand the heating cycle to include identify components in heating system, understand how each component works, diagnose problems in the heating system using a gas pressure test and other devices for routine maintenance and to troubleshoot and repair. Understand the refrigeration cycles to include identifying components in advanced refrigeration circuits, understanding how each component works, diagnosing and correcting problems in the refrigeration circuit, using manifold gauge set, pressure/temperature chart and temperature measuring devices for routine maintenance and to troubleshoot. Knowledge of power density and parity with HVAC system capacities, and cooling and heat load/loss calculations. Qualifications: Applicants must have a high school diploma or GED or greater Applicant must have a 6+ years of experience in a data center environment or other critical facility environment in the electrical or mechanical field Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including U.S. Citizenship, for access to classified information; Ability to obtain and maintain a Secret clearance. Applicants identified as Mechanical shall have experience with centrifugal chillers greater than 300 tons, boilers, or significant other mechanical experiences Applicants identified as Electrical shall have experience with switchgear, generators, UPS or significant other electrical experiences Journeyman or Master License in Electrical or Mechanical Mechanical applicants must possess an EPA Certification VMET (Verification of Military Experience and Training) is accepted if it reflects relevant electrical or mechanical experience and is approved by customer We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: Lifts at least 100 pounds at one time and 60 pounds for an extended period of time. Relocates a 12-foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 114,000 colleagues serve people in more than 160 countries. Working at Abbott At Abbott, you can do work that matters, grow, and learn, care for yourself and your family, be your true self, and live a full life. You’ll also have access to: • Career development with an international company where you can grow the career you dream of., • Employees can qualify for free medical coverage in our Health Investment Plan (HIP) PPO medical plan in the next calendar year., • An excellent retirement savings plan with a high employer contribution., • Tuition reimbursement, the ___ student debt program, and ___ education benefit - an affordable and convenient path to getting a bachelor’s degree., • A company recognized as a great place to work in dozens of countries worldwide and named one of the most admired companies in the world by Fortune., • A company that is recognized as one of the best big companies to work for as well as the best place to work for diversity, working mothers, female executives, and scientists. The Opportunity The Field Service Automation Engineer is the primary automation account contact covering both technical support and customer experience. The position provides on-going proactive product support for assigned accounts. The customer experience aspect of this role will focus on increasing customer loyalty; securing retention; and driving value expansion at assigned accounts. Territory/Location • This position is a remote position., • Territory: Central/Southern Ohio and Indiana, • Qualified candidates must currently live in the Columbus, OH area., • Local travel 90%, 20% that may require overnights What You’ll Work On • Provide technical Level I and Level II phone and on-site support to proactively maintain product performance or resolve customer complaints for hardware; software; and reagent issues. Level I support is defined to a specific set of error codes that could be repaired in less than1.5 hrs. Level II support is defined as any error code excluding Level I that would be resolved in more than 1.5 hrs., • Perform proactive service support activities to maintain system performance. Apply standard troubleshooting tools or concepts to identify the real issue and its root cause., • Determine level of urgency of service support requests; develop recommendations and implement solutions that reflect customer and Abbott business need., • Record accurate and timely documentation of customer complaints and the action taken to resolve the concern., • Plan and prioritize customer visits and activities to do in each account., • Prepare; schedule; and execute training events with customers to improve customer self-sufficiency by developing the customer’s ability to troubleshoot/repair analyzers and increase knowledge of component replacement and assays., • Coordinate order, delivery, and billing of products and/or services in assigned accounts. Monitor inventory and replenish accordingly., • Responsible for Service Contract Sales at assigned accounts., • Partner with Enterprise Account Manager and/or Sales Executive to develop account-specific lab strategy and execution throughout commercial cycle and participate in customer business reviews., • Understand competitive landscape of assigned accounts or territory and leverage it to maximize business opportunities. Develop/preserve strong relationships to gain meaningful insights that will allow for value expansion opportunities. Responsible for achieving revenue generation goals in assigned accounts. Required Qualifications • Associate's Degree or equivalent experience., • Minimum Experience / Training Required., • 2 years of relevant experience with instrumentation utilized in a laboratory environment., • 2 years of experience interfacing with customers. Learn more about our health and wellness benefits, which provide the security to help you and your family live full lives: ___ Learn more about our health and wellness benefits, which provide the security to help you and your family live full lives: Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity. Connect with us at ___, on LinkedIn at ___, and on Facebook at ___. The base pay for this position is $31.60 – $63.20 per hour. In specific locations, the pay range may vary from the range posted.

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 114,000 colleagues serve people in more than 160 countries. ABOUT ABBOTT Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology. This position works out of our Columbus, Ohio plant location in the Abbott Nutrition Division. Our Nutrition business develops science-based nutrition products for people of all ages, from helping babies and children grow to keeping adult bodies strong and active. Millions of people around the world count on our leading brands – including Similac®, PediaSure®, Pedialyte®, Ensure®, and Glucerna® – to help them get the nutrients they need to live their healthiest lives. The Columbus Plant is Abbott’s first manufacturing facility in the world, making us a leader in science-backed nutrition products. Working here, you’ll be part of a family that works together to produce quality products that make a difference and help keep consumers nourished at every stage of their lives. WORKING AT ABBOTT At Abbott, you can do work that matters, grow, and learn, care for yourself and your family, be your true self, and live a full life. You’ll also have access to: • Production areas that are clean, well-lit and temperature-controlled, • Training and career development, with onboarding programs for new employees and tuition assistance, • Financial security through competitive compensation, incentives and retirement plans, • Health care and well-being programs including medical, dental, vision, wellness and occupational health programs, Medical Benefits start day 1, • Vacation – 120 hours of accrued vacation (1st yr is prorated) + vacation buy program + 3 personal days + 10 paid holidays, • Retiree Healthcare program, • Robust 401(k) retirement savings with a generous company match, • Tuition reimbursement, the ___ student debt program and ___ education benefit - an affordable and convenient path to getting a bachelor’s degree., • A company recognized as a great place to work in dozens of countries around the world and named one of the most admired companies in the world by Fortune., • A stable company with a record of strong financial performance and history of being actively involved in local communities, • A company that is recognized as one of the best big companies to work for as well as the best place to work for diversity, working mothers, female executives, and scientists. THE OPPORTUNITY As a Quality Engineer, you will be developing and maintaining quality engineering methodologies and providing quality engineering support within new product development, manufacturing, or system/services support. WHAT YOU’LL DO • Identify and implement effective process control systems to support the development, qualification, and on-going manufacturing of products to meet or exceed internal and external requirements, • Lead, coach, and mentor non-exempt and entry level exempt personnel, • Assist in the development and execution of streamlined business systems which effectively identify and resolve quality issues, • Apply sound, systematic problem-solving methodologies in identifying, prioritizing, communicating, and resolving quality issues, • Design and conduct experiments for process optimization and/or improvement, • Appropriately document experiment plans and results, including protocol writing and reports, • Lead process control and monitoring of CTQ parameters and specifications, • Lead and implement various product and process improvement methodoligies (e.g., Six Sigma and Lean Manufacturing), • Lead the investigation, resolution and prevention of product and process nonconformances, • Participate in or lead teams in supporting quality disciplines, decisions, and practices (e.g., represent the Quality function as a Core Team Member), • Lead in the completion and maintenance of risk analysis, • Work with engineering in the completion of product verification and validation, • Support all company initiatives as identified by management and in support of Quality Management Systems (QMS), Environmental Management Systems (EMS), and other regulatory requirements SHIFT Day shift. This will ideally be a shifted schedule to allow for more coverage and support beyond the typical first shift. This will be discussed and decided between the candidate and hiring manager throughout the interview process QUALIFICATIONS • Bachelors Degree in an Engineering or Technical Field, • 3+ years of experience, • Engineering experience and demonstrated use of Quality tools/methodologies., • Solid communication and interpersonal skills., • Strong project management and leadership skills, including the demonstrated ability to lead multi-departmental project teams and resolve quality-related issues in a timely and effective manner, • Advanced computer skills, including statistical/data analysis and report writing skills., • Experience implementing various product and process improvement methodologies (e.g., Six Sigma and Lean Manufacturing)., • Ability to work within a team and as an individual contributor in a fast-paced, changing environment. PREFERRED QUALIFICATIONS • Experience with technical writing, root cause assessment/analysis, and corrective actions, • Experience implementing various product and process improvement methodologies (e.g., Six Sigma and Lean Manufacturing)., • Experience working with microbiology to ensure appropriate environmental monitoring and that microbiology requirements are considered in product and process development activities In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. ___ In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Learn more about our health and wellness benefits, which provide the security to help you and your family live full lives: ___ Learn more about our health and wellness benefits, which provide the security to help you and your family live full lives: *Employees can qualify for free medical coverage in our Health Investment Plan (HIP) PPO medical plan in the next calendar year. Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer and a Military/Veteran friendly Employer, committed to employee diversity. Connect with us at ___, on Facebook at ___, and on Twitter @AbbottNews. The base pay for this position is $75,300.00 – $150,700.00. In specific locations, the pay range may vary from the range posted.

Job DescriptionField Support Engineer, Pharmacy Automation Compensation: Salary + Bonus + Company Car We're looking for a dedicated Field Support Engineer to join our team. In this role, you'll be the face of our company, providing world-class technical and customer support for our advanced pharmacy automation products. You'll travel regionally to service and maintain equipment in various pharmacy environments, ensuring our clients receive exceptional service and their systems run flawlessly.

Job Description Promotes the sale of Amada software and peripherals within assigned territory. Conducts on-site support to set up the software parameters to match the machine’s specifications to take full advantage both have to offer. Assists Sales Engineer in all phases of software sales to new machine sales. Promotes upgrade business within territory and supports training of new functionality. ESSENTIAL FUNCTIONS: * Promote and sell Amada software (VPSS 3i/4ie, Bend/Blank, AP100US) and related peripherals. * Assist Sales Engineers in software setup for new machines and upgrades. * Conduct on-site software installation, configuration, networking, and demonstrations. * Respond to customer inquiries and provide technical support. * Support software training for new functionality and upgrades. * Maintain sales activity and support reports in Infor CRM. * Prepare software sales quotes for new, updated, or upgraded products. • Prepares special reports, as needed. Experience with Amada software applications or CAD/CAM programming. * Background in sheet metal manufacturing, job shops, or engineering. * Basic networking and software installation skills. * Excellent communication skills (verbal and written). * Highly organized, detail-oriented, and self-motivated. SKILLS: • Knowledge of Amada Software., • Computer knowledge (word processing and spreadsheets).

Job Description As a Sales Engineer in our Machine Tool Sales Division, you'll drive growth by building customer relationships, identifying opportunities, and promoting AMADA's sheet metal machinery and solutions. This role blends technical expertise, sales skills, and consultative selling to help clients optimize operations with cutting-edge equipment. Ideal for those who excel at understanding manufacturing needs, product demonstrations, and closing value-driven deals. Key Responsibilities • Achieve sales targets by promoting AMADA metal fabrication solutions, accessories, and related technologies., • Maintain existing customer relationships and prospect new accounts via cold calling, networking, and industry resources., • Educate clients on emerging technologies to solve fabrication challenges., • Conduct sales calls, product demos at Solution and Technical Centers, and encourage event participation., • Offer technical consultations, prepare proposals, quotes, and coordinate orders using CRM systems., • Collaborate with specialists and teams to identify upsell opportunities, such as tooling or services., • Stay updated on products, pricing, and market trends to effectively sell AMADA's value., • Bachelor's degree in engineering (mechanical, industrial, or related) or equivalent sales experience in manufacturing/machinery., • 2+ years in technical sales, preferably with CNC machinery, punch presses, or sheet metal equipment., • Strong knowledge of manufacturing processes, including hydraulics, software, and automation., • Proficient in Microsoft Office (Word, Excel, PowerPoint); CRM experience preferred., • Excellent verbal/written communication for explaining concepts and building rapport., • Self-motivated, detail-oriented, and able to thrive independently in a fast-paced environment., • Valid driver's license; willing to travel frequently (including overnight)., • Ability to lift up to 25 lbs. and demonstrate equipment. Pay Rate Base salary: $72,000 annually, plus commissions, $570 monthly sales allowance, and incentives. Top earners exceed $150,000/year through sales-based commissions, bonuses, and growth. Benefits • Major Medical and Hospitalization, • Pharmacy, • Dental, • Vision, • 401(k) Plan with match, • Profit sharing, • Life insurance, • Long-Term Disability, • 12 paid holidays, • Flexible scheduling, • Cellphone, • Laptop, • Travel accommodations, • Wellness programs AMADA invests in employee development, making this role a stepping-stone to senior sales, management, product specialization, or leadership positions. Our promote-from-within culture includes ongoing training on technologies like fiber lasers and automation. Enjoy a supportive environment with low turnover, team events, recognition, and contributions to innovative projects in American manufacturing.

Job Description Job Requisition: Senior Sales Engineer Requisition Title: Senior Sales Engineer Position Summary: We are seeking an experienced Senior Sales Engineer to join our SymmetricDS product team and support the sales process by acting as a technical expert and trusted advisor to our prospective clients. This role bridges the gap between complex technical solutions and customer business needs, ensuring successful pre-sales engagements and long-term customer satisfaction. Key Responsibilities: • Partner with sales representatives to understand client requirements and provide tailored technical solutions., • Deliver product demonstrations, proof of concepts (POCs), and technical presentations., • Translate customer business requirements into technical solutions that align with our offerings., • Lead RFP/RFI responses, solution architecture documentation, and technical proposals., • Maintain deep understanding of SymmetricDS product and industry trends to serve as a subject matter expert., • Assist with onboarding and mentoring junior sales engineers as needed., • Serve as a technical liaison between customers and internal teams (product, engineering, support)., • Support post-sales handoff to implementation teams and ensure customer success alignment. Qualifications: Required: • Bachelor’s degree in Engineering, Computer Science, or related field (or equivalent experience)., • 5–8+ years of experience in a sales engineering, solutions consulting, or pre-sales role., • Strong technical background in databases, data warehouse, data replication and integration., • Proven ability to manage complex sales cycles and support enterprise customers., • Excellent communication, presentation, and interpersonal skills. Preferred: • Experience with the Java programming language., • Ability to setup and maintain docker images., • Experience with Canva to build and organize technical documents for the pre-sales process

Job Description Senior Project Manager, Transportation (hybrid) ms consultants, inc. Columbus, Ohio Are you an experienced transportation professional looking to work on exciting projects and make a lasting impact in the industry? We’re seeking a Senior Project Manager to join our expanding Transportation Group in Central Ohio. This is a fantastic opportunity for someone who’s ready to elevate their career while working on diverse and innovative projects. We know work-life balance is important and offer paid time off and flexible work schedules for when you need it, in addition to company paid holidays. Our focus on work-life balance also includes a hybrid work option, giving you the flexibility to work in the office and at home. If you're a leader who thrives in a collaborative, forward-thinking environment, we want to hear from you! About the Transportation Business Unit At ms consultants, inc., we provide comprehensive transportation engineering services for projects of all sizes — from major interstate systems to local roads. Our services include roadway and intersection design, corridor improvements, bridge replacement and rehabilitation, and environmental documentation. Our expert team of engineers works closely together to deliver innovative, cost-effective, and sustainable transportation solutions that benefit communities and enhance infrastructure across the regions. What You'll Do: As a Senior Project Manager, you will be a key player in our Transportation Business Unit, managing a range of exciting projects while collaborating with engineers, technicians, and administrative staff. Through your design skills and leadership, clients will continue to receive cost effective solutions ms consultants, inc. has been accustomed to providing for more than 50 years. • Lead Transportation Projects: Manage the day-to-day operations of transportation projects, including staff, budgets, and schedules, ensuring successful project delivery., • Drive Design Excellence: Oversee roadway design and plan preparation for highway and other transportation projects, ensuring quality and compliance with standards., • Ensure Project Quality: Lead internal reviews of plans and designs, maintaining the highest standards for technical quality and accuracy., • Mentorship & Team Leadership: Provide guidance, feedback, and mentorship to junior staff, fostering growth and excellence within the team., • Client Interaction: Manage relationships with clients, including presentations and regular communication to ensure satisfaction and alignment with project goals., • Strategic Management: Prepare project proposals, manage scope-of-work, develop fees, and identify project risks and solutions., • Budget & Schedule Oversight: Ensure projects are delivered on time, within budget, and meet the scope of services outlined in the contract. What You'll Bring: We are looking for a professional who combines strong technical expertise with excellent leadership and communication skills. You should bring: • Proven Experience: Experience in the design and preparation of plans for both interstate and local road projects., • Licensing: A Licensed Professional Engineer (P.E.) in Ohio, or the ability to obtain within six months of hire., • Project Management Expertise: Demonstrated success in managing large-scale transportation projects, budgets, and schedules., • Leadership Skills: Experience mentoring and supervising junior staff and leading project teams., • Technical Proficiency: A solid understanding of ODOT and FHWA standards and the ability to navigate complex regulations., • Collaboration & Independence: The ability to work both independently and as part of a cross-functional team., • Technical Tools: Experience with MicroStation, GeoPAK, and Open Roads is preferred., • Communication Skills: Exceptional verbal and written communication skills to effectively liaise with clients and team members. Educational Qualifications: • BS in Engineering from an ABET accredited College or University Ready to take the next step in your career? Apply today and become part of our team! Why Choose ms consultants? We are proud to be an award-winning engineering, architecture, planning and environmental consulting firm, annually ranking within ENR’s Top 500 Design Firms. We partner with a variety of public and private clients and take pride in the many relationships we have formed by providing quality design solutions since 1963. We are dedicated to helping these clients achieve their goals through integrated, innovative solutions, and outstanding customer service. As a member of the ms team, we consider your needs as a professional and as an individual outside of work. We offer a career path which provides opportunities for advancement at any level of your career and costs for licensure, certifications, and further education. To support yourself and your family, we offer a robust benefits package with options for health coverage, in addition to life insurance, disability, long-term care, and more. Our comprehensive 401(k) plan with company matching contributions sets you up for the future, from hire to retire. Wherever you are in your personal and professional journey, ms has you covered. We know work-life balance is important and offer paid time off and flexible work schedules for when you need it, in addition to company paid holidays. Our focus on work-life balance also includes a hybrid work option, giving you the flexibility to work in the office and at home. We’re also able to offer full-time remote work for select position, depending on the role and work requirement. Our Mission: By investing in our people, we create comprehensive solutions for communities and clients. Our Vision: Our vision is to shape a better tomorrow. Our Values: We are accountable. We foster collaboration. We stand for inclusion. We are committed to excellence. We are passionate about our work. The ms Commitment to Diversity, Equity, & Inclusion ms is a company that actively promotes anti-racist values and fosters an environment of diversity, equity, and inclusion. This means working together to speak out and take action against all forms of racism, bias, and discrimination, not only in our company but in our community and everyday lives. Read more about ms DEI here. ms consultants, inc. is an Equal Opportunity/Affirmative Action employer. ms fully supports and maintains compliance with all state, federal, and local regulations. ms does not discriminate against applicants or employees on the basis of race, color, religion, sex (including gender identity, sexual orientation, and pregnancy), national origin, age (40 or older), disability, or genetic information.

Job Description POSITION SUMMARY: As a Project Manager I, you are responsible for contributing to the overall safety, direction, completion, and financial outcome of construction projects from initial budget through project closeout. Safety is a core value, and Project Managers are expected to promote and exemplify safe work practices. In this role, you are expected to work with individuals at all levels of Project Management and Field Supervision to establish operational priorities and ensure a quality project. Project Managers are expected to maintain positive and effective working relationships with both internal and external members of the Project Team and support departments. MAJOR RESPONSIBILITIES: Project Management • Ensure customer satisfaction by identifying and exceeding client objectives and needs, • Estimate, value engineer, and develop project budgets, • Facilitate the subcontractor bid process including processing, distribution, and tracking of all project bidding documentation, • Utilize software programs and templates to process, distribute, and track all project documentation, • Negotiate subcontractor and material buyout; develop and negotiate subcontracts, • Plan and schedule projects, • Manage jobs in progress including subcontractor coordination, conflict resolution, documentation, and ensuring quality and safety on every job, • Manage project costs through the ongoing evaluation of labor, material, and equipment; continue to forecast and analyze construction costs, exposures, and profits through project completion, • Perform project closeout, • Capable of managing single projects in the $5 million to $20 million range or multiple small projects in various stages of construction, • Responsible for developing project safety plans, safety budgets, and safety scopes of work, • Build a master schedule including preconstruction and construction phases and manage subcontractor schedules, • Understand, negotiate, and purchase complete scopes of work, • Align subcontractor agreement terms with owner contract terms, • Maintain relationships with owners, architects, and developers, • Develop and lead job start meetings, • Generate cost-to-complete reports, • Lead quality walks, develop a Project Specific Quality Plan and scopes of work, • Provide leadership through building relationships, motivating others, providing clear direction, and fostering cooperative teamwork, • Communicate effectively in writing and in conversation, • Interact with clients and potential clients to identify and pursue potential work, • B.S. in Construction, Engineering, or a related technical area is preferred, • 7+ years of experience, • Ability to build and maintain strong working relationships, • Experience in healthcare, K-12, and higher education construction is a plus, • A collaborative approach to leading successful projects, • Self-motivated with the ability to work independently and as part of a team, • Customer-focused

Job Description Columbus, OH, US (hybrid work) Job Description Jumpmind is looking for a Senior Software Engineer, who is passionate about solving challenging business problems with creative software solutions, to join an exciting, growing software company. The SymmetricDS team at Jumpmind helps hundreds of customers and thousands of open-source community members replicate data quickly and reliably. Since 2007, SymmetricDS software empowers organizations to build integration solutions that combine data from disparate sources into meaningful and valuable information. Our customers include well-known brands and companies, from around the world, across multiple industries. Requirements Roles and Responsibilities • Work as part of a team to collaborate on innovative solutions, participate in code reviews, and deliver enhancements to core products., • Analyze software requirements and translate them into technical implementation of new product functionality., • Participate in the 24x7 on-call support rotation, about once a month., • Troubleshoot customer’s system and perform root cause analysis., • Document defects and collaborate to develop timely solutions., • Collaborate with cross functional teams and internal stakeholders to ensure accuracy and quality delivery of released software., • Present technical topics to teammates and demonstrate functionality to business users., • Evaluate and identify new technologies for adoption., • Lead small teams to accomplish development initiatives., • Provide mentorship for other team members., • Assist and guide open-source community projects. Essential Experience, Skills, and Qualifications • Bachelor’s degree in Computer Science, Math or related field., • 5+ years software development experience using modern software languages with exposure to all phases of the software development life cycle., • Experience developing solutions in Java, Spring., • Deep understanding data storage fundamentals., • Experience manipulating data in SQL databases., • Solid understanding of Unit testing, CI/CD, Agile, and DevOps concepts., • Champions principles of clean and re-usable code., • Strong problem-solving and communication skills., • Self-starter with the ability to learn quickly and work independently or as part of a team., • Experience working with customers/end-users. Preferred Experience, Skills, and Qualifications • Troubleshoot applications running in a distributed enterprise environment., • Automate build steps with scripts, Gradle/Maven and Github Actions., • Building APIs using REST., • Cloud infrastructure technologies such as Kubernetes, Helm and Terraform., • Developing software running on cloud services such as AWS, Azure or GCP., • Monitoring tools such as Prometheus and Grafana., • UI/UX experience with Vaadin framework.

Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Job Summary: The primary responsibilities of the role are the direct management of the most complex network fiber projects and oversight of all fiber maintenance in market. Job Duties and Responsibilities: • Provide technical expertise to peers and management as a subject matter expert (SME) in your field., • Take ownership of the most complex projects, shepherding them to successful completion. Build project plans, scope of work (SOW), bill of materials (BOM), order and track materials, and schedule team members., • Responsible for daily management of splicing and testing of OSP facilities., • Assists in the planning and implementation of fiber connectivity solutions programs and projects that adhere to approved plans, budgets and schedules for various customers, • Manage multiple projects concurrently, ensure quality delivery on schedule., • Develop less senior project managers through direct support and mentoring efforts., • Review all PM and JPM fiber projects for accuracy, profitability, and adherence to corporate values., • Perform periodic QA inspections of all active field projects., • Participate in pre-construction and regular status meetings with customers and other vendors. Ensure clear expectations, scopes of work., • Conduct site walks and validate that plans and expectations align with conditions., • Collaborate with peers and operations management to ensure project success. Validate material inventories and appropriate resources are scheduled to make all job timelines., • Prepare all reports and close out documents per job requirements., • Expert in both fiber optic network maintenance and emergency restoration processes., • Expert level understanding of communications cabling types., • Must have extensive experience in maintaining fiber-optic deployments of outside plant networks., • Deep familiarity with the materials, manufacturers, and equipment related to communications cabling products, fiber optic cable and OSP splice enclosures., • Ability to read and interpret blue-prints, splice engineer packages, and network design drawings. Extrapolate requirements to create take off materials including quotes, scope of work (SOW), method of procedure, etc., • Strong ability to accurately estimate labor effort and material requirements., • Expert knowledge of fiber optic testing techniques and requirements., • Excellent familiarity with fiber splicing methods, splicing and testing equipment, and all related documentation standards., • Excellent interpersonal and communications skills, focused on customer service., • Extensive knowledge of safety, security, Telcordia standards and industry best practices., • Strong proficiency with the MS office suite, Outlook, Power Point., • Must hold a valid driver's license., • High School diploma or equivalent., • Must have 4 years familiarity with all types of outside plant fiber engineering and experience managing large fiber networks., • PMP or equivalent certification and minimum 5+ years managing and maintaining fiber networks, • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 15 pounds at times. Network Connex is committed to creating a workplace environment where every employee can strive for excellence. To achieve our workplace vision, we provide the following benefits: • Health/Dental/Vision/Prescription Plan: Health, dental, and prescription insurance are available on the 1st of the month following your start date., • Basic Life Insurance and Short-Term Disability Insurance fully funded by the company., • 401(k) Plan with Employer Matching immediate vesting., • 10 Paid Holidays per year. NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

Job Description Who We Are… Since our founding in 1901, Limbach’s primary core value has always been: We Care. We are committed to creating a culture of belonging for our employees, our We Care culture, and our industry as a whole. Limbach Facility Services LLC, a subsidiary of Limbach Holdings, Inc., (NASDAQ: LMB) is an integrated building systems solutions firm whose expertise is the design, installation, management, service, and maintenance of HVAC, mechanical, electrical, plumbing and control systems. We engineer, construct, and service the mechanical, plumbing, air conditioning, heating, building automation, electrical and control systems in both new and existing buildings and infrastructure. We work for building owners in the private, not-for-profit, and public/government sectors. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. We carry out our vision and purpose through a commitment to our four core values… • We Care, • We Act with Integrity, • We Are Innovative, • Base salary of $100K - $125K + SPM commissions, • Full portfolio of medical, dental, and vision benefits, along with 401K plan and company match., • HSA, FSA, and life insurance offerings., • Maximize your professional development with our award-winning Learning & Engagement team., • Engage in our “We Care” culture through our ERGs, brought to you by EMBRACE. As Special Projects Manager, you are assigned to specific accounts (typically 1-3). Special Projects are typically defined as T&M, fixed price work orders or small projects generally less than $500K which are completed in four (4) weeks or less, so as to allow Special Projects Managers to consistently sell and execute new work for these top accounts on a recurring basis without the burdens of project managing larger work for an extended duration of time. The Special Projects Manager assumes responsibility for meeting the revenue and gross profit goals, sales, and sales margin goals on their assigned accounts. This role ensures that work in the area is completed on time, within budget, to the customer’s satisfaction, and tracked in an accurate manner, all within the guidelines established by the Limbach Operating System. This person is a key member of the branch Special Projects team responsible for driving growth of the recurring revenue base across their assigned accounts. This Position… Some examples of the work you might do includes: • Assumes responsibility for achievement of their individual sales and operational gross profit goals., • Proactively manages accounts by dedicating 100% of his/her time to selected and assigned mission critical MEP accounts that are aligned with the branch’s niche as a technical MEP specialist., • Makes routine customer visits daily and/or weekly for regular interaction and customer attention., • Develops excellent customer relationships by positioning the company to be the first call, “go-to” trusted source for operational maintenance and improvement of the customers mechanical systems., • Proactively analyzes mechanical systems to develop repair, replacement, upgrade, or retrofit recommendations for customers, and presents findings/estimates to the customer with the goal of closing a sale and providing excellent customer service., • Understands customer spending habits and approval limits and is skilled at pricing and presenting proposals accordingly., • Manages small teams of technical field personnel prepared to respond quickly to pressing “on demand” emergency needs, scheduled repairs, replacements and/or planned projects with professionalism and efficiency., • Plans and manages work with a unique understanding of the customer’s ongoing operations in mind resulting in minimal disruption to the customer’s business objectives., • Partners with the service coordinator and/or field operations staff to plan out daily and weekly manpower needs to support the customers., • Understands the company’s capabilities and actively collaborates across the branch to ensure a seamless customer experience and capture additional wallet share through the deployment of personnel and/or staff needed to propose the branch’s full suite of sales offerings., • Collaborates with Account Executives, Account Managers, Sales Representatives, Special Projects, • Managers, Areas Service Managers and major project operations teams to ensure client needs are met., • Promptly reviews work on site, performs material, labor and equipment take-offs, writes bid scope proposals and submits for acceptance and approval., • Prepares project booking documents allowing for efficient cost management., • Manages costs by promptly expediting materials, equipment, and parts in a timely and cost-effective manner, • Ensures all work is billed promptly upon completion or per the terms of appropriate contract documents., • Monitors payment of customer invoices and follows up on all receivables over 60 days past due., • Participates in strategic account planning exercises to increase recurring revenue from captive accounts, • Trains and develops new SPD management and field supervisory personnel as required, • 5+ years of hands-on, industry-specific experience., • Demonstrated ability to engage in effective collaboration and communication (both written and verbal)., • Strong computer skills, including proficiency with Microsoft Office (Excel in particular) or equivalent Google Applications., • Bachelor’s Degree or Previous experience in technical skilled trades execution, most notably hydronic and plumbing system installation, service or maintenance., • Demonstration of both sales and operational experience., • Self Starter who is looking to solve problems and create solutions directly with customer., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • This position operates primarily in a professional office environment, and routinely utilizes standard office equipment, such as computers, phones, copiers, and filing cabinets., • In performing the duties of this job, the incumbent is regularly required to walk, talk, stand, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity., • This is considered a sedentary work position, which means possible exertion up to ten (10) pounds of force occasionally, and/or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Job Description Senior Project Manager – Building Systems Architecture ms consultants, inc. Columbus, OH or Raleigh, NC ms consultants is seeking a Senior Project Manager to join and strengthen our growing Building Systems team. In this leadership role, you will oversee multidisciplinary projects from conception through completion—managing scope, schedule, and budget while fostering trusted client relationships. You will work closely with the Building Systems Senior Vice President to drive project success, expand client opportunities, and contribute to the strategic growth of the business unit. We are looking for a collaborative problem solver with strong communication skills, proven experience in client account leadership, and the ability to manage complex project demands. The ideal candidate brings expertise in relationship-building, budget and fee management, and conflict resolution, with a passion for delivering high-quality results. About the Building Systems Business Unit The Building Systems Business Unit provides integrated architecture, engineering, and planning consulting services to a diverse client base across commercial, and public clients including financial, retail, restaurant, office, municipal and grocery. Our projects range from multi-unit retail developments, schools, and municipal facilities to industrial sites, commercial interiors, and urban redevelopment. We are dedicated to creating innovative, functional, and sustainable spaces that serve communities and businesses alike. What You Will Do: As a Senior Project Manager, you will lead internal teams and guide clients, ensuring that every project meets its goals with excellence: • Provide leadership and oversight of business and production operations., • Serve as the primary client contact, managing relationships and strengthening trust. Develop and implement project management plans aligned with client scope, schedule, and budget., • Track and monitor production hours per phase, coordinating with technical leaders across disciplines., • Maintain billing projections within 5% accuracy of actuals and oversee client invoices in coordination with accounting., • Support business development efforts, contributing to client acquisition strategies and sales goals., • Mediate scope and fee disagreements, balancing the needs of clients, disciplines, and the firm., • Lead the effort to prepare fee proposals, conducting fee negotiations in conjunction with Technical Services Managers and Technical Responsible Parties., • Manage scope modifications and negotiate contract changes as needed., • Facilitate weekly project reviews, evaluating schedule, construction costs, and profitability. What You'll Bring: We are seeking a motivated professional who is committed to building a long-term career with ms, with a strong desire to grow and develop. Specific requirements include: Required • Bachelor’s degree in architecture from an accredited institution, or BS in Engineering from an ABET-accredited institution (or related field)., • Demonstrated experience in project management, client account leadership, and multidisciplinary coordination., • Licensed Architect or Professional Engineer., • Experience managing budgets, negotiating fees, and resolving scope conflicts., • Proven ability to strengthen client relationships and support business development. Why Choose ms consultants? We are proud to be an award-winning engineering, architecture, planning and environmental consulting firm, annually ranking within ENR’s Top 500 Design Firms. We partner with a variety of public and private clients and take pride in the many relationships we have formed by providing quality design solutions since 1963. We are dedicated to helping these clients achieve their goals through integrated, innovative solutions, and outstanding customer service. As a member of the ms team, we consider your needs as a professional and as an individual outside of work. We offer a career path which provides opportunities for advancement at any level of your career and costs for licensure, certifications, and further education. To support yourself and your family, we offer a robust benefits package with options for health coverage, in addition to life insurance, disability, long-term care, and more. Our comprehensive 401(k) plan with company matching contributions sets you up for the future, from hire to retire. Wherever you are in your personal and professional journey, ms has you covered. We know work-life balance is important and offer paid time off and flexible work schedules for when you need it, in addition to company paid holiday. Our focus on work-life balance also includes a hybrid work option, giving you the flexibility to work in the office and at home. We’re also able to offer full-time remote work for select position, depending on the role and work requirement. Our Mission: By investing in our people, we create comprehensive solutions for communities and clients. Our Vision: Our vision is to shape a better tomorrow. Our Values: We are accountable. We foster collaboration. We stand for inclusion. We are committed to excellence. We are passionate about our work. The ms Commitment to Diversity, Equity, & Inclusion ms is a company that actively promotes anti-racist values and fosters an environment of diversity, equity, and inclusion. This means working together to speak out and take action against all forms of racism, bias, and discrimination, not only in our company but in our community and everyday lives. Read more about ms DEI here. ms consultants, inc. is an Equal Opportunity/Affirmative Action employer. ms fully supports and maintains compliance with all state, federal, and local regulations. ms does not discriminate against applicants or employees on the basis of race, color, religion, sex (including gender identity, sexual orientation, and pregnancy), national origin, age (40 or older), disability, or genetic information.

Job Description ABOUT ITC MANUFACTURING: Our Why: Pride in Every Weld. Our purpose is simple - to build trust with relentless quality and to empower every person by turning hard work into lasting opportunity. Our Mission: We engineer and manufacture precision wire mesh solutions that meet the highest standards of quality, safety, and performance. By aligning our expertise with each customer’s specific needs, we build trust through consistent delivery, proven durability, and pride in every weld. Our Core Values: • Craftsmanship – We take pride in precision and quality - every mesh we make reflects our skill and standards., • Care – We value people and processes, protecting safety, promoting sustainability, and creating satisfaction at every step., • Trust – We build lasting relationships through consistent quality, transparency, and reliability., • Accountable – We own our work, honor our commitments, and deliver results you can count on., • Competitive pay, • Comprehensive medical, dental, and vision insurance plans, • 100% employer paid medical option available, • Short- and long-term disability insurance, • Life and AD&D insurance, • 11 paid company holidays, • Paid vacation time, • Paid sick leave, • 401(k) retirement plan with an employer match of up to 4%, • $5,000 undergraduate & $15,000 graduate annual tuition reimbursement, • In-house career growth development programs AVAILABLE SHIFTS: 1st Shift Weekend Friday-Sunday 7am-7:30pm 3rd Shift Weekend Friday-Sunday 7pm-7:30am POSITION SUMMARY Responsible for the safe and efficient operation, set-up, and maintenance of mine mesh wire welding and forming machinery. This role includes handling heavy-gauge wire, ensuring product strength and dimensional accuracy, and supporting production needs specific to mesh used in mining applications such as ground support and reinforcement. PRIMARY RESPONSIBILITIES • Operate and monitor mine mesh welding and forming machines to produce heavy-duty mesh panels used in mining and tunneling applications., • Perform machine set-ups and tooling changes to accommodate various mesh sizes, gauges, and configurations specific to mine mesh standards., • Conduct start-up, in-process, and final quality checks to ensure weld integrity, panel dimensions, and wire spacing meet strict mining safety standards., • Troubleshoot issues related to wire feed, weld consistency, alignment, and material flow., • Maintain a clean, organized work area and ensure tools, dies, and spare parts are properly stored., • Accurately complete production logs, quality checklists, and batch records., • Read and interpret production work orders, blueprints, and mine mesh specifications., • Assist with loading and feeding large wire coils; coordinate with material handlers as needed., • Conduct daily and scheduled preventive maintenance on mine mesh machinery., • Train other team members on the safe and proper use of mine mesh equipment., • Strictly follow all OSHA safety protocols, including Lockout/Tagout (LOTO)., • Work collaboratively with production leads and support staff to meet delivery timelines and quality standards., • Contribute ideas for process improvement, equipment efficiency, and safety., • Perform additional duties as assigned by leads, coordinators, or management. KNOWLEDGE AND SKILL REQUIREMENTS • Minimum 3 years of experience operating heavy-duty mesh welding/forming equipment, preferably in mining or structural mesh manufacturing., • Strong mechanical aptitude and ability to make machine adjustments and minor mechanical repairs., • Familiarity with high-tensile wire, mesh panel layout, and mine safety reinforcement products., • Proficient with measurement tools including calipers, micrometers, and tape measures., • Ability to interpret mine mesh blueprints and technical drawings., • Able to lift up to 60 pounds, bend, and work on your feet in a production environment., • Comfortable working around large, automated machinery and computer-controlled systems., • Self-driven, detail-oriented, and capable of working both independently and within a team., • Strong attendance and punctuality required., • Welding background and/or formal mechanical training is a plus. An aptitude test is required for selected candidates.

Job Description Join our Hazen team and make the world a better place providing exceptional client service in all things water® and superior technical solutions for our clients. Hazen is a creative, employee-owned company with minimal bureaucracy where employees thrive. Hazen has outstanding opportunities for motivated, talented people that enjoy teamwork and collaboration, client service, and solving our clients’ most difficult challenges. Senior Principal Engineer / Project Manager Hazen and Sawyer is seeking a qualified and experienced Senior Principal Engineer to join our team on a full-time basis to support the design and construction of water and wastewater facilities and infrastructure in the Central Ohio Area. We work on a diverse range of projects for municipalities and our clients can expect the highest level of service and expertise from us. As a SPE/PE you will be tasked with leading projects, providing direction and mentorship to junior staff, and coordinating with the client regarding project status and deliverables. Skills needed include excellent communication (written and verbal) skills, strong technical experience for various water, wastewater, or reclaimed water facilities, and strong work ethic and sense of accountability. This position reports to our Columbus, Ohio office and travel within the area is required. Job Description As a Senior Principal Engineer/Project Manager you will manage and support the delivery of projects in the Central Ohio area, with support from and provide support to project teams that span Ohio and the Midwest Region. The ideal candidate has 10 or more years of experience working on or with municipal water, wastewater, or reuse projects and is looking to continue to grow their technical and project management skillset by managing projects and teams. You will support and mentor engineers and will be supported by senior mentors on projects. This position requires experience with project management or the desire to grow into a project management role. The position will lead to an increasing level of client development and management commensurate with experience, supported by our local office and firm-wide technical resources. Candidate should have extensive facility design experience. This position includes leading and delivering municipal water/wastewater facilities planning and design projects. Task responsibilities will include project management, preparation of assessment and design reports, performing design calculations, equipment sizing/selection, preparation of construction documents, support construction management/commissioning needs, etc. Fieldwork and site visits from planning through construction may be required with occasional travel. What We Offer: Our “Hazen Everywhere” approach allows work schedule flexibility, including allowing options for partial remote work and part-time or full-time schedules. We also offer competitive pay and comprehensive benefits program to meet the personal and professional needs of employees and their families, with the majority of premium costs covered by the Firm. Our benefits package includes: • Medical and dental insurance for employees and dependents, • Disability and life insurance, • Flexible spending accounts, • 401(k) plan with employer contribution, • Holidays and combined PTO Qualifications and Skills Required • 10+ years of relevant experience with facility and infrastructure design (or something similar), • Registered PE in Ohio (or obtain reciprocity in 12 months), • Bachelor of Science degree in Civil, Environmental, Chemical, or Mechanical Engineering, • Experience delivering water and/or wastewater facility projects from preliminary design through construction, • Demonstrated strong work ethic and efficient work methods, • Excellent verbal and written communication skills, • Engagement with professional societies and similar organizations by participating in meetings and conferences, • Proficient in standard software platforms (e.g., Microsoft Office Suite, Bluebeam, etc.), • Strong organizational skills Preferred • Project Management or Task Management experience in the central Ohio market for water/wastewater facilities projects, • Master of Science degree in Civil, Environmental, Chemical, or Mechanical Engineering, • Documented experience managing multiple successful project teams delivering high quality projects while meeting schedule and budget goals, • Experience supervising, coordinating, mentoring, and reviewing work by staff, • Experience communicating and coordinating with clients, • Experience supporting proposal preparation and participating in interviews

Job Description ABOUT ITC MANUFACTURING: Our Why: Pride in Every Weld. Our purpose is simple - to build trust with relentless quality and to empower every person by turning hard work into lasting opportunity. Our Mission: We engineer and manufacture precision wire mesh solutions that meet the highest standards of quality, safety, and performance. By aligning our expertise with each customer’s specific needs, we build trust through consistent delivery, proven durability, and pride in every weld. Our Core Values: • Craftsmanship – We take pride in precision and quality - every mesh we make reflects our skill and standards., • Care – We value people and processes, protecting safety, promoting sustainability, and creating satisfaction at every step., • Trust – We build lasting relationships through consistent quality, transparency, and reliability., • Accountable – We own our work, honor our commitments, and deliver results you can count on., • Competitive pay, • Comprehensive medical, dental, and vision insurance plans, • 100% employer paid medical option available, • Short- and long-term disability insurance, • Life and AD&D insurance, • 11 paid company holidays, • Paid vacation time, • Paid sick leave, • 401(k) retirement plan with an employer match of up to 4%, • $5,000 undergraduate & $15,000 graduate annual tuition reimbursement The Tool Room Technician plays a key support role in ITC Manufacturing’s Columbus facility by helping ensure timely and effective machine setups. This position is responsible for repairing and maintaining common setup components such as air cylinders, hydraulic cylinders, and other mechanical parts used in mesh welding equipment. In addition, the technician will support the machine shop in resurfacing or fabricating small parts using manual machining equipment such as lathes, mills, and drill presses. Key Responsibilities: • Disassemble, inspect, and repair pneumatic and hydraulic cylinders, brackets, and other mechanical setup components, • Resurface or fabricate small parts using manual machine tools including lathes, mills, and drill presses, • Maintain inventory and readiness of commonly used setup parts to improve setup speed and reliability, • Assist with troubleshooting component issues and recommending repair or replacement, • Keep accurate records of repairs performed and parts serviced, • Support setup teams by preparing and delivering refurbished components as needed, • Collaborate with maintenance, engineering, and production staff to reduce downtime and improve setup efficiency, • Mechanical aptitude and hands-on experience with industrial equipment or component repair required, • Must have proven experience with machining operations such as turning, milling, and drilling, • Ability to read mechanical drawings or sketches, • Strong attention to detail and self-motivation, • Basic understanding of hydraulic and pneumatic systems, • Welding or fabrication experience is a plus, but not required, • Experience in a manufacturing or machine shop environment, • Strong organizational skills and the ability to prioritize workload, • Willingness to work independently and cross-functionally, • Eagerness to learn and support process improvement efforts, • Ability to work while standing for long periods, • Can work successfully in a team environment and/or independently and is able to take direction from others., • Heavy lifting (up to 60 pounds) of materials, bending, and stooping may be required., • Punctuality a must, • Self-Starter, Team Player, • Quality driven in all aspects of the role., • Formal technical training a plus

Job DescriptionDescription: Jr. Network Engineer Responsibilities • Provide network engineering, implementation, sustainment, migration, technical refresh, and lifecycle services for Datacenter and Cloud enterprise network infrastructure., • Ensure all software and firmware on network hardware are maintained and up to date on vendor supportable code versions., • Implement network architectural changes in response to future network technology enhancements, customer requirements, security requirements and enhancements, technical refresh efforts, lifecycle requirements, or changes in network capacity requirements., • Support a number of Intrusion and Detection Systems (IDS) and other network defense architectures in support of cyber defense operations and cloud migration initiatives., • Support all current and future Data Center enterprise network infrastructure architectures and cloud initiatives in accordance with industry standards and best practice., • Responsible for commissioning, capacity planning, de-commissioning, and tracking of wide area connectivity supporting Data Centers, • Communicate, brief ideas and information to people of non-technical background to include senior leadership., • Must have an active SECRET or higher security clearance., • 2+ years of relevant experience with design and implementation of complex Datacenter and Enterprise Network infrastructure in a multi-vendor environment, • DoD 8570.01-M/8140.01 IAT Level II Certification (Security+, CySA+, etc.), • Relevant secondary certification (i.e. Cisco, F5, Juniper, Palo Alto, Cloud, etc.), • IT bachelor’s degree or Vendor Network Certification (Professional or higher), • Strong and extensive knowledge of datacenter-based network methods, protocols and technologies to include:, • Routing [BGP/ OSPF/MP-BGP/ MPLS/VPN/Multicast/PBR], • Switching [RSTP, VLAN, VXLAN, LLDP, VPC, LACP, LAG], • TCP/IP, IPv4, IPv6, UDP, Layer 1 through Layer 7, IPSEC, HAIPE, • Firewalls [VPN, ACLs, Whitelisting], • Load balancing [APM, ASM, LTM, GTM], • SDN/ NFV/ IAC [ACI, Service Insertion, Ansible], • Identity and Access Management with RBAC [AAA/RADIUS/TACACS/ LDAP], • Network management and analysis (Performance Manager (PM), Juniper Space, Cisco ISE, Splunk], • Structured cabling and installation standards, • Application of net- work security and design practices, • Cloud management [AWS/AZURE], • Knowledge in software modules to include: [F5 BIG-IP LTM, GTM, APM, ASM], • Proficiency in use of government systems to track ops and management of systems and performance including but not limited to ITSM+ (ServiceNow), GTMS, Microsoft 365