Welder jobs in Tulsa, Oklahoma - Page 2Create job alerts

Job DescriptionWelder Pay Rate and Hours • $25.00/hr, • M-Thur 5am-3:30pm, OT as requiredWelder Purpose:, • Performs a variety of welding and grinding procedures on a variety materials and parts using manual and semi-automatic machines., • Prepares weld area appropriately to result in good weld penetration and meets structural integrity criteria, • Welds metal components using primarily MIG or FLUX CORE welding wire, • Welds galvanized and pre-primed material using appropriate techniques to produce high quality final parts, • Welds metal components using automated and semi-automated equipment, • Ensures dimensional accuracy and appearance criteria, • Properly set and adjust welding machine to produce quality welds, • Assembles/disassemble and fasten / unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specifications, • Assemble / disassemble small parts not requiring precision alignment or small tolerances, • Assemble / disassemble small parts requiring precision alignment and small tolerances, • Performs any other assigned taskWelder Basic Requirements:, • Prior non-code welding experience, • Must be able to comprehend the English language.Welder Additional Requirements:, • Ability to perform welding in hard to reach and awkward positions, • Ability to walk/stand up to 10 hours per day, • Ability to perform work while wearing specialized welding PPEWelder Desired Skills:, • Good mechanical aptitude, • Ability to correctly prepare weld areas and set related equipment

Job DescriptionPosition: SMAW/GMAW – Welder Overview: We’re seeking an experienced SMAW/GMAW Welder with the ability to produce RT-acceptable welds on pipe. The ideal candidate will be skilled in both SMAW and GMAW processes, able to interpret blueprints accurately, and capable of passing a 6G and branch weld test. This position requires precision, consistency, and strict adherence to safety and quality standards. Responsibilities: • Perform SMAW and GMAW welding processes on pipe and structural components, • Read and interpret blueprints, weld symbols, and project documentation, • Produce RT-acceptable welds that meet code and inspection requirements, • Perform 6G and branch weld tests on 12"-on-12" minimum diameter pipe, • Inspect and verify weld quality during and after production, • Maintain welding equipment and ensure proper setup and calibration, • Proven experience as a SMAW/GMAW pipe welder in an industrial or fabrication setting, • Ability to pass a 6G and branch test (12"-on-12" minimum diameter), • Strong understanding of welding procedures, codes, and safety requirements, • Ability to read and follow detailed blueprints and weld maps, • Week Day Shift – Monday – Thursday 6:00am–4:30pm

Job Description Overview Tradesmen International is immediately hiring skilled Pipe Welders for projects located in and around Arcade Acres, WI. This is a full time opportunity with a pay rate of up to $30/hour based on experience & skill level plus $100/per diem for travelers of 60+ miles from the job site. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • Perform precise welds in multiple positions according to job specifications, • Conduct post-weld inspections to ensure quality and compliance with standards, • Interpret and work from technical drawings and blueprints, • Maintain a clean, safe, and organized work environment, • Follow all safety procedures and protocols to prevent accidents and ensure compliance, • Troubleshoot and adjust welding parameters for optimal performance, • Collaborate with team members to meet production goals and deadlines, • Ability to read blueprints, • MIG weld stainless pipe, • Read blue prints, • Use precision measurement tools Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job Description Skilled Trades Specialists is looking for quality individuals aiming to land a great job with opportunity to grow and develop! If you have the ability to MIG Weld, ability to read prints and/or do basic math, and have a great attitude, please contact us so we can discuss! Must be able to pass a leak test for this position. We do test prep for this job at our shop. This is not an entry level position. Must have prior Mig welding experience. Double-time on Sundays if you work 7 consecutive days! Responsibilities: • Perform MIG welding operations on various metal components, • Read and interpret blueprints to determine welding specifications, • Use power tools and hand tools to fabricate and assemble metal parts, • Operate cranes and other lifting equipment to move heavy materials, • Inspect welded joints for quality and make any necessary repairs or adjustments Requirements: • Experience as a MIG Welder or similar role and ability to continue learning, • Knowledge in blueprint reading and interpreting welding specifications or ability to learn, • Ability to pass required leak/pressure test

Job DescriptionJOB DESCRIPTION Days: Monday - Thursday Hours: 6:00am - 4:30pm, Friday and Saturday overtime as needed 6:00am - 2:15pm Pay: $34 - 36 DOE Products: Waste heat recovery equipment designed and built to ASME Code: waste heat and process gas boilers (firetube boilers, watertube boilers), steam drums, economizers, superheaters, Pressure Vessels WELD TEST(s) • Welding: 6" Sch 80 6G GTAW Stringer / Hot Pass, SMAW Fill and Cap., • Read, interpret, and understand drawings and welding procedure requirements., • Perform basic and advanced math functions., • Ability to Layout, Cut, Fit and Tack pressure and non-pressure parts. Including but not limited to cylinders, nozzles, tubes, tubesheets, headers, structural components,, • Utilize leveling equipment to ensure orientation accuracy., • Experience in Flux Core (FCAW), Stick (SMAW), and Tig (GTAW)., • Submerged arc welding a plus but not required., • Weld in all positions (Flat, Horizontal, Vertical, Overhead)., • Must be able to Pass X-rays and other Non-Destructive testing methods., • Variety of ferrous and non-ferrous materials: Carbon, Stainless, Chrome, and Nickel Alloys., • Proficient using Carbon arc gouge and cutting torch., • All work must meet ASME Code, Company and Client Requirements., • Perform other shop labor tasks as needed., • 5 Plus years of experience in a manufacturing setting required.

Job DescriptionLocation: Sand Springs Fitter Welder I or II Pay Rate and Hours: • $23-$29/hr, • Friday, Saturday, Sunday from 6:00 a.m. – 6:30 p.m. They will work 36 hours but get paid for 40 hours.Fitter Welder I or II Job Description:, • Fitter Welder I or II responsibilities are clamps, holds, tack-welds, grinds, and bolts components to position for welding., • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications., • Measure dimensions of completed products or workpieces to verify conformance to specifications., • Develop templates and models for welding projects, using mathematical calculations based on blueprint information., • Analyzes engineering drawings and specifications to plan layout, assembly, and welding operations., • Maintain and complete all required records and production documentation., • Layout, fits nozzles supports and couplings per blueprint into shell., • Remove rough spots from workpieces, using portable grinders, hand files, or scrapers., • Maintains a safe work environment and reports defective tools and equipment. Fitter Welder I or II Skills:, • Ability to operate a forklift and crane., • Complies with all safety rules and regulations., • Perform other duties as assigned., • High school diploma or equivalent (GED)., • 2 year technical degree or vocational certificate in welding preferred., • 2 to 4 years of relevant experience and/or training., • Read and interpret blue prints and have strong mathematic skills., • Ability to use and read level, tapes, protractors, and various tools., • Possession of strong organizational skills., • Excellent written and verbal communication skills., • Ability to work independently on assigned tasks.

Job DescriptionSub Arc Welders Needed in Tulsa and Surrounding Areas Shifts Available: Various (Day, Night) Position Overview:We are seeking a skilled and experienced Sub Arc Welder to join our team in Tulsa, OK. The ideal candidate will be responsible for performing high-quality submerged arc welding operations on a variety of metal components. This position offers the opportunity to work on various shifts, providing flexibility to fit your schedule. Key Responsibilities: • Perform submerged arc welding (Sub Arc) on structural steel, pipe, and other metal components., • Read and interpret blueprints, engineering drawings, and welding symbols to ensure precise and accurate welding., • Set up and operate welding machines, including adjusting settings for specific jobs., • Inspect completed welds to ensure they meet quality standards and specifications., • Maintain welding equipment and perform routine maintenance as needed., • Work safely and adhere to all company and industry safety protocols., • Collaborate with team members and other departments to meet production goals and deadlines., • High school diploma or GED equivalent., • Certification in welding (preferred)., • Minimum of 1 year of experience in submerged arc welding., • Strong understanding of welding techniques, materials, and processes., • Ability to read and interpret blueprints and technical drawings., • Familiarity with safety procedures and best practices in a welding environment., • Attention to detail and a commitment to producing high-quality work., • Ability to work independently and as part of a team., • Ability to lift, carry, and move materials weighing up to 50 lbs., • Prolonged standing, bending, and reaching during welding operations.

Job Description Job description: Skilled Trades Specialists is looking for quality individuals aiming to land a great job with opportunity to grow and develop! If you have the ability to MIG Weld, ability to read prints and/or do basic math, and have a great attitude, please contact us so we can discuss! Must pass a leak test and also show proficiency with a tape measure for this job. Responsibilities: • Perform MIG welding operations on various metal components, • Read and interpret blueprints to determine welding specifications, • Use power tools and hand tools to fabricate and assemble metal parts, • Operate cranes and other lifting equipment to move heavy materials, • Inspect welded joints for quality and make any necessary repairs or adjustments Requirements: • Experience as a MIG Welder or similar role and ability to continue learning, • Knowledge in blueprint reading and interpreting welding specifications or ability to learn, • Ability to pass required leak/pressure test -Positive attitude and ability to show up everyday Note: This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned. Job Type: Full-time

Notify the responsible welder or foreman of defects seen during course of work. Other welder and fabrication duties as required. The successful candidate will have 90 days after their initial hire date to pass the required welder qualification test according to Roxtec International standards.

Ameron Pole Products, a national manufacturer of Steel and Concrete Lighting and Traffic Poles, has openings for qualified MIG Fitter/Welders responsible for the layout and assembly of pole sections in preparation for welding.

The Welder/Fabrication C is responsible for planning, laying out, and fabricating complex production and experimental metal parts and assemblies using a wide range of tools and processes.

Koch - - Responsibilities: Ensure all processes are carried out with the required use of safety controls and PPE requirements; Join, fabricate, and repair metal and other weldable material by applying appropriate welding techniques; Read blueprints and join parts with little to no assistance; Setti

Valmont Industries - - Responsibilities: Weld metal components together to fabricate or repair products according to layouts, blueprints, or work orders, using brazing and variety of arc and gas welding equipment; Fuse (weld) metal structural components together by means of arc welding using one pr

Aerotek - JobID: JP-005850093 [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned.

Tradesmen International - - Responsibilities: Perform precise welds in multiple positions according to job specifications; Conduct post-weld inspections to ensure quality and compliance with standards; Interpret and work from technical drawings and blueprints; Maintain a clean, safe, and organized

Aerotek - - Responsibilities: Perform TIG welding on aluminum, stainless steel, and titanium materials.Handle materials with thicknesses ranging from 0.Conduct TIG tests on 14 gauge/.

NOV - - Responsibilities: Casting Repair: Fill, blend, and repair defects, holes, or cracks in metal castings using MIG (Metal Inert Gas), TIG (Tungsten Inert Gas), or arc welding; Finishing: Perform grinding, polishing, and sanding on castings to remove excess weld; Inspection: Inspect the pre-exi

Phillips Tank & Structure (PTS).We specialize in the complex and fast-paced environment of tank repair on a nationwide scale.No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues.Our experienced engineering staff are well-versed in API 650, API 653,

What the Fitter Welder I Will Be Doing. Required Qualifications for the Fitter Welder I.

Coppersmith with 1-3 Years of Experience.One of Oklahoma's leading roofing companies is looking for a talented coppersmith to join our amazing roofing team in the field.The Coppersmith's role is responsible for delivering an amazing, exceptional, 100% customer satisfaction experience, completing job

Monday - Thursday | 3:30 PM - 2:00 AM.MIG and TIG welding while reading blueprints to ensure accurate assembly.MIG and TIG welding experience.High attention to detail and commitment to.Essential Duties & Responsibilities.Perform repairs and rework as needed.G Pipe Test - 2 1/2" on Carbon (TOA).

Specific certifications may include Certified Welder or Certified Foundry Specialist (CFS).

From engineers to welders, salespeople to sandblasters, OGI has some of the best talent in the industry. The Fitter Welder I is responsible for fitting parts for OGI units.

Welder I should be qualified in ASME Section IX, Weld multiple parts per written welding procedures, responsible for all roll operations on rolling flat bar.

Selects fabrication equipment and plans layout, assembly, and welding procedures.Bolts, clamps, and tack-welds parts to secure in position for welding.Sets up equipment and welds parts using Arc, Gas-Shielded Arc, or Gas Welding equipment.Repairs products by dismantling, straightening, reshaping and

Monday – Friday | 5:00 AM – 3:30 PM.G position MIG welding while maintaining proper weld penetration, alignment, and structural integrity.Structural MIG (GMAW) welding experience required.Reliable attendance and strong work ethic.Essential Duties & Responsibilities.MIG (GMAW) welding in the 3G p

Simple Application, Immediate Hire.All Experience Levels Encouraged to Apply.Full Time, Part Time & Seasonal Openings Available.

If you are a skilled Fitter Welder or Structural Welder ready for immediate work, this is an excellent opportunity to join a reputable Tulsa fabrication shop. Structural Welder Requirements & Testing Weld Test Includes: 3/8" Carbon Plate MIG root pass, Flux fill & cap Bend test 24" T-Plate Test –

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

Boise Cascade - 9999 East 58th Street - Responsibilities: Receive, select, and load materials; Operate forklift safely and efficiently; Verify accuracy of orders after packaging and loading; Provide basic customer service to internal and external customers; Maintain clean working area.

Aerotek - - Responsibilities: Inspect stainless steel and copper plates for defects, ensuring all ports and orifices meet blueprint specifications.Read and interpret blueprints to confirm dimensions, orientation, and assembly steps.Use computer systems to access blueprints, check inventory, and ent

Nesco Resource - - Responsibilities: Assemble and install tube bundles into air-cooled heat exchanger units with precision and attention to detail.

Alro Steel - - Responsibilities: Fill and prepare material orders for shipment; Operate overhead cranes; Operate forklifts; Operate metal saws; Operate shears; Operate lasers.

Nesco Resource - - Responsibilities: Assemble and install tube bundles into air-cooled heat exchanger units with precision and attention to detail.

Discovery Senior Living - - Responsibilities: Performing maintenance and housekeeping duties in and around the community grounds as assigned; Complete service requests for repair and maintenance of grounds, buildings, apartment homes, equipment and vehicles; Fix wall and floor coverings and repair

FedEx - - Responsibilities: Operate equipment for movement of packages/documents/heavyweight; Assist in buildup/breakdown of pallets containing heavyweight freight; Serve as liaison between company and ULD repair vendor; Perform other duties as assigned; Successfully complete basic and re-currency

Dover - - Responsibilities: Assemble parts according to Bill of Material, Bill of Operations, engineering drawings and any other related controlled documents; Operates hydraulic and manual presses to assist in assembly operation; Performs test procedures on assemblies as directed; Required to maint

Aerotek - - Responsibilities: Diagnose equipment issues and interpret electrical/mechanical schematics; Order replacement parts and maintain proper documentation; Install, test, repair, and modify electrical and mechanical components; Support facility maintenance throughout the plant; Participate i

Nesco Resource - - Responsibilities: Assemble structural aerospace components using drill.

InterSolutions - - Responsibilities: Assign and assist with apartment service requests, ensuring all work orders are logged accurately and completed promptly; Manage vacant apartments, ensuring timely preparation for new leases; Maintain the grounds by keeping them free of debris and trash; Provide

EMCOR Group - - Responsibilities: Perform preventative maintenance and repairs on HVAC, electrical, plumbing systems; Conduct shift rounds to identify issues and document performance; Document work results in CMMS and update PM lists; Coordinate with subcontractors and vendors for maintenance; May

Amcor - - Responsibilities: Perform preventive and repair maintenance on production machinery; Work safely using required PPE and follow safety rules; On-call technician in rotation; Assist in breakdowns and repairs including pneumatic, hydraulic, and mechanical applications; Install equipment and

South 129th East Avenue - Responsibilities: Maneuver freight, load and unload both by hand and with equipment; Perform duties as assigned by site leadership; Lift and carry 25-75lbs, materials handled vary; Work in a fast-paced environment; Maintain safety and efficiency in material handling.

NOV - 25 South Main Street - Responsibilities: Repair production equipment safely and efficiently following breakdowns; Perform preventative maintenance and troubleshoot mechanical and electrical issues; Fabricate, modify, and install new or existing equipment; Support continuous improvement project

Responsibilities: Maintains work area and equipment in a clean orderly condition and follows safety regulations; Operates production equipment in accordance with established procedures and guidelines; Participates in the CMC Safety Programs and proactively upholds the CMC Safety Culture; Any other t

Responsibilities: Operate an electric stand-up forklift to move pallets in the warehouse; Hand-stack product from partial pallets onto full pallets; Transport merchandise and equipment throughout the warehouse.

JobID: 5001180414306 [Field Technician / Maintenance Mechanic] As a Maintenance Technician at PepsiCo, you'll: Be responsible for repairing and installing production/manufacturing equipment; Inspect equipment for proper functioning and perform preventative maintenance duties per manufacturer's speci