Trabajos manual en NottinghamCrear alertas

LONG TERM PM TRUNKING WORK ALL YEAR ROUNDNEWLY QUALIFIED LGV1, HGV1, C+E, LGV 1, HGV 1 CLASS 1 DRIVERS WELCOMEIMMEDIATE STARTS, ALL SHIFTS PLANNED A WEEK IN ADVANCEFULL TIME - PART TIME - WEEKENDSStaffline is recruiting for HGV Class 1 drivers with immediate starts for our client based out of Beeston, Nottingham.PAYE rates for the role of HGV Class 1 driver are as follows:Days (06:00 - 18:00 Monday to Friday, 06:00 - 13:59 Fridays) - £15.40 per hourNights (18:00 - 05:59 Monday to Friday) - £16.30 per hourWeekends (Friday 14:00 to Sunday 23:59) - £20.70 per hourOvertime - £23.10 per hour on Days / £24.46 per hour on NightsBank Holiday Days - £23.10 per hourBank Holiday Nights - £24.46 per hourPeak increased rate runs from Mid August until the end of December!Staffline are delighted to offer regular trunking work with shifts available across all 7 days!All start times can be considered.All shifts are planned, confirmed and in place one week in advance.New passes welcome!Your Time at WorkAs an HGV Class 1 driver, the work will involve Class 1 depot delivery work.You will be responsible for all aspects of trunking work throughout East Midlands and other counties. This position requires NO HEAVY MANUAL HANDLING, only occasional collections and deliveries of cages via a tail lift.Our client's continuous growth is a testimony to their increasing success and this site operates all year round so will provide each driver with a long term ongoing assignment.Our Perfect WorkerAs an experienced LGV1 driver, you will ideally have -- No more than 6 points- Digi card and DCPCInterviews will be held immediately.Key Information and Benefits- Earn up to £24.46 per hour- Full time and part time regular work- Holiday pay & pension- All rotas are confirmed one week in advance- Various shifts are available- 24/7 support from Staffline- Canteen on site- Weekly payFollow our Driving Facebook page and click on LikeSearch: Staffline DrivingAbout StafflineStaffline is the UK's largest recruitment solutions partner, enabling over 35,000 people into good work every week. We operate at more than 420 customer sites across England, Scotland and Wales.As one of the most established recruitment agencies in Nottingham with operations across the UK, we specialise in connecting businesses with temporary and permanent jobs across warehouse & logistics, food and drink, aviation, driving, technical & engineering, manufacturing & automotive and security.Important Information- Staffline and its subsidiaries do not charge any recruitment or job-seeking fees at any stage of the hiring process.- This job advert may not be copied, imitated, or used, in whole or in part, by third-party websites, without prior written consent from Staffline.- Our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change.TPBN1_UKTJ

Financial Accountant Nottingham (Hybrid – 3 days at site) £45-55k + benefits High Growth Medium Sized Business Eaton Syalon is exclusively partnering with a high growth acquisitive Nottingham based business to recruit an experienced Financial Accountant to join its finance team in a key role, supporting the delivery of accurate financial reporting, strong financial controls and continuous improvement across the function. This is a newly created role within the organisation. Working closely with the Financial Controller & CFO, you'll have the opportunity to contribute to a wide range of financial accounting activities, from statutory reporting and group consolidations to process improvements and business projects. If you're someone who enjoys combining technical accounting expertise with a collaborative approach and is looking to make a positive impact within a supportive finance team, we'd love to hear from you. The Opportunity As Financial Accountant, you'll play a key role in ensuring the organisation maintains a robust financial control environment while delivering accurate statutory reporting, group consolidations and tax compliance. This is a varied role with the opportunity to lead projects, influence finance transformation initiatives and support best practice across the finance function. Your key responsibilities will include: Financial Control & Governance • Maintaining and enhancing a robust financial control environment., • Safeguarding company assets and ensuring compliance with accounting standards and regulations., • Leading month-end and year-end financial processes., • Developing and monitoring internal controls, policies and procedures., • Acting as a key contact for external auditors and tax advisers., • Ensuring statutory, regulatory and audit requirements are met. Financial Accounting You'll confidently take ownership of: • End-to-end balance sheet management., • Group consolidation processes., • Preparation of financial accounts., • Audit preparation., • Complex financial reporting., • Statutory accounts., • Tax compliance., • IFRS and FRS 102 reporting requirements. Technical Accounting You'll bring strong technical expertise, including: • A thorough understanding of current accounting and tax legislation., • Experience applying IFRS and FRS 102 standards., • Strong knowledge of accounting within Group structures., • Understanding of both direct and indirect taxation. Mentoring & Team Development Working closely with the Financial Controller, you'll help: • Support, mentor and develop colleagues within the finance team., • Encourage collaboration across the business., • Contribute to a culture of continuous improvement and high performance. Financial Reporting & Business Insight You'll produce meaningful financial information that supports business performance, including: • Monthly balance sheet reconciliations., • High-quality financial reporting., • Actionable commercial insights., • Continuous improvement of reporting processes and financial data integrity. Continuous Improvement You'll help drive positive change by: • Streamlining finance processes., • Automating manual tasks where possible., • Improving reporting efficiency., • Supporting finance transformation initiatives., • Embedding best-practice financial processes across the organisation., • Working with stakeholders to improve financial understanding across the business. Project Work You'll also lead or support a variety of finance and business projects, including: • Systems implementations and upgrades., • Process redesign., • Finance transformation initiatives., • Other ad hoc projects as required by the Finance Director. About You You'll be a fully qualified accountant or a finalist studying towards your qualification (ACA, ACCA, CIMA or equivalent) with proven experience in a Financial Accountant or similar role. You'll also bring: • Strong financial accounting experience., • Excellent understanding of financial governance and controls., • Experience producing statutory financial accounts., • Strong knowledge of IFRS and FRS 102., • Experience with Group consolidations., • A solid understanding of direct and indirect taxation., • A track record of driving continuous improvement., • Excellent analytical, problem-solving and communication skills. We're looking for someone who is: • A collaborative team player., • Detail-focused with exceptional accuracy., • Commercially aware with strong statutory accounting knowledge., • Comfortable managing multiple priorities and deadlines., • Proactive, solution-focused and confident challenging existing ways of working., • Passionate about improving processes and adding value. Why Apply This is an excellent opportunity to join a collaborative finance team in a role that offers genuine variety, technical challenge and the chance to make a meaningful contribution. You'll gain exposure to financial reporting, governance, transformation projects and business improvement initiatives while continuing to develop your career in a supportive environment. If you're looking for your next opportunity and would like to be part of a finance team where your knowledge and ideas are valued, we'd love to hear from you.

hackajob is collaborating with System C to connect them with exceptional professionals for this role. \n Description \n We are looking for an experienced Senior Data Analyst to join us on a short-term contract to establish a robust portfolio insight framework that enables better decision-making across complex healthcare and social care software delivery environments. \n This is not a traditional reporting role. You will play a key part in shaping how data is used to actively manage delivery performance, capacity, risk, and overall portfolio health. You will bring structure to complex, imperfect data and translate it into meaningful, actionable insight for senior leaders. \n At System C, we are on a mission to transform health and care outcomes through technology. You will be working in an environment that values collaboration, ownership, and continuous improvement, where your work will directly support better outcomes across the sector. \n What you will be doing \n\n • Define and establish a portfolio insight framework, including key measures and governance\n, • Design and deliver clear, consistent dashboards and reporting using Power BI\n, • Bring together data from systems such as Salesforce, Precursive and other internal tools\n, • Provide visibility of delivery performance, risk, dependencies and forecast outcomes\n, • Develop insight across capacity, utilisation, delivery progress and portfolio health\n, • Identify data quality gaps and recommend improvements to data and reporting processes\n, • Partner with PMO, Operations, Finance and delivery leaders to produce meaningful KPIs\n, • Create executive-level reporting to support governance and decision-making forums\n, • Move reporting from manual processes to repeatable, scalable insight models\n\n What we are looking for \n\n • Strong experience in a Senior Data Analyst, BI Analyst or similar role\n, • Proven ability to create insight-led dashboards using Power BI\n, • Experience working with Salesforce data, ideally within delivery or commercial contexts\n, • Experience in complex environments, such as SaaS, healthcare technology or professional services\n, • Strong understanding of portfolio reporting, utilisation, capacity and performance metrics\n, • Confidence working with incomplete or evolving data sets\n, • Excellent stakeholder engagement skills, particularly at senior level\n, • A hands-on, practical approach with the confidence to challenge and improve existing reporting\n\n Why join us \n At System C, you will work as part of one team, taking ownership of meaningful work that improves health and care delivery. You will be supported to grow, encouraged to challenge, and trusted to deliver impact in a fast-moving environment. \n This is an opportunity to make a real difference while shaping a sustainable reporting framework that will continue to deliver value beyond your contract. \n Apply today and help us build the insight foundations that drive better outcomes.

Fully Remote | Flexible Hours | Fee-Split Model \n \n Join a Forward-Thinking Boutique Firm \n \n Are you an experienced Residential Conveyancer looking for more than just another conveyancing role? Do you find that your clients and referrers are choosing you, not necessarily the firm you work for? \n \n If that sounds familiar, it might be time to consider a consultancy model – and start earning up to 75% of the fees you generate. Many lawyers have already made the move to consultancy, and it’s transforming the way they work, and the money they earn. \n \n At FDR, we specialise in helping conveyancers make that transition with confidence. Choosing the right firm can feel daunting – even isolating – but that’s where we come in. We're a small, forward-thinking boutique firm that offers more than just a platform. Here, you’re not just another number. Your voice matters, your work is appreciated, and your growth is genuinely supported. \n \n We’re a close-knit, modern legal practice giving experienced conveyancers the chance to take full control of their careers – with the very best technology to back you up. You’ll have direct access to senior leadership, streamlined systems, and the freedom to work how and when it suits you. \n \n Why Join Us? \n \n\n • Personal Support, Not Just a Platform\n, • We don’t leave you to figure things out alone. You’ll get real support to grow your business – with marketing help, mentoring, and a community of like-minded consultants who share insights and success.\n, • Work on Your Terms\n, • Remote working, flexible hours, and total autonomy over your caseload. It’s your practice, built your way – under a clear, fair fee-split model.\n, • Big Tech, Small Firm Feel\n, • We’ve invested in Salesforce – a game-changer in legal tech and rarely used by firms of any size. Thanks to the backing of our parent company, the AIIC Group, we have access to cutting-edge systems that mean fewer manual tasks, significant time savings, and a smoother experience for you and your clients.\n, • You’re Heard and Valued\n, • In our compact team, you’ll have a direct line to leadership (including the CEO) and the ability to help shape how the firm evolves. We listen, and we act on what matters to you.\n, • Full Support, Without the Red Tape\n, • Benefit from the financial security, compliance guidance, and admin support that comes from being part of the AIIC Group – without sacrificing your independence or flexibility.\n\n \n What We’re Looking For: \n \n\n • A qualified solicitor, licensed conveyancer, or legal executive with experience in residential property\n, • Confident in managing your own caseload from instruction to completion\n, • Tech-savvy and excited by smarter, more efficient ways of working\n, • Self-motivated and ready to grow your own client base with full backing\n, • Looking for true flexibility, with the support of a professional and collaborative team\n\n \n Ready to build a career on your terms – with the tools, support, and autonomy to thrive? We’d love to hear from you. \n \n Contact us today for a confidential chat with one of our Recruitment Executives. \n \n P.S. Our Legal Consultancy Programme does not require a set number of years PQE, however you need to be practising and legally qualified in England and Wales in Property law, and able to generate your own instructions. Contact us now to see if you qualify.

Freelance Employability Tutor – Warehousing & Logistics Location: East Midlands (Nottingham) Rate: Competitive Daily Rate Contract: Freelance / Self-Employed Are you an experienced Warehouse or Logistics professional with a passion for developing people? Whether you're already delivering training or looking to use your industry expertise in a more rewarding and flexible role, this is an excellent opportunity to help adult learners gain valuable skills, recognised qualifications, and the confidence to secure long-term employment. Join a respected training provider and play a key role in supporting the next generation of warehouse and logistics professionals. About the Company Our client is a well-established and highly regarded training provider specialising in Employability, Adult Education, and Skills programmes across the UK. With a strong reputation for delivering high-quality, learner-focused training, they work closely with employers, local communities, and industry partners to create meaningful pathways into employment. The organisation is committed to supporting both learners and tutors, providing structured resources, strong operational support, and a collaborative environment where delivery professionals are trusted to use their expertise to make a genuine difference. Why join? Flexible freelance and self-employed opportunity Structured training materials and delivery resources provided Supportive quality assurance and learner engagement teams Opportunity to deliver meaningful programmes that improve employment outcomes Autonomy to manage and deliver engaging training sessions Work within the expanding Employability and Skills sector Make a direct impact on learners' confidence, skills, and career progression About the Job As a Freelance Employability Tutor – Warehousing & Logistics, you will deliver engaging, practical training programmes to adult learners across Nottingham and the wider East Midlands region. You will combine your industry knowledge with learner support and coaching to help individuals develop the skills, behaviours, and confidence required to secure employment within warehousing, logistics, and supply chain environments. Key responsibilities will include: Delivering training in warehouse operations, logistics processes, stock control, manual handling, and workplace health and safety. Supporting learners working towards Level 1 and Level 2 Warehouse & Storage qualifications. Embedding employability skills such as communication, teamwork, problem-solving, and workplace professionalism. Delivering engaging, hands-on sessions aligned to current industry standards and employer expectations. Monitoring learner progress and maintaining accurate, compliant learner documentation. Providing coaching, mentoring, and ongoing support to maximise learner achievement. Ensuring delivery meets quality standards, funding requirements, and learner outcome targets. Supporting learners into employment opportunities and further progression routes. Ideal Candidate You’ll be an experienced Warehouse, Logistics, or Supply Chain professional with a passion for training, mentoring, and supporting adults into work. You will have: Experience within warehousing, logistics, supply chain, or manufacturing environments Experience delivering training, employability programmes, or vocational education Strong knowledge of warehouse operations, stock control, and workplace health & safety A recognised teaching or assessing qualification such as AET, PTLLS, DET, DTLLS, TAQA, or equivalent Strong communication and learner engagement skills Ability to motivate and support learners from diverse backgrounds Full UK driving licence and access to your own vehicle Desirable: Experience delivering AEB-funded or DWP-funded employability programmes Experience supporting learners into work within the logistics sector * Understanding of Ofsted requirements and funded training provision Apply Now If you're looking for a flexible freelance opportunity where your warehouse and logistics expertise can help transform lives and support people into meaningful employment, we'd love to hear from you. Apply today and join a respected training provider where your experience, industry knowledge, and passion for developing others will make a lasting impact on learners across Nottingham

We are looking for a talented Metal Fabricator/Welder/Fitter to join our expanding team based in our workshop at Nottingham and on customer sites in the UK. We require a highly skilled, self-motivated individual that possesses a high level of quality & ownership skills. The successful candidate must be competent with the use of all metal working machinery along with an excellent eye for detail.Role & ResponsibilitiesMain purpose :Responsible for building high quality metal componentsResponsibilitiesYour role may include but not limited to:Building high quality metal componentsReading & interpreting engineering drawingsReacting to customer breakdowns in-house and onsiteMeasuring, marking cutting & bendingSet up metal work machinery including presses, cutters, brakes, shears & rollersGrinding & finishing to a high specificationCarrying out all QA checks prior to despatchWorking within Company H&S proceduresAny ad-hoc responsibilitiesEssentialFlexibilityAble to work as part of a teamDemonstrate an excellent H&S ethic and have knowledge & experience of conforming to Safety RegulationsDemonstrate high level of detailDesirableQualifications in manual handlingQualification in Mechanical EngineeringAdvanced welding qualificationsAdvanced knowledge of engineering & manufacturing proceduresBenefits:Salary Sacrifice SchemesCompany eventsCompany pension & Life AssuranceSchedule:8 hour shiftMonday to FridayOvertime availableExperience:FabricatingWeldingFittingTPBN1_UKTJ

Our client, a well-established manufacturing company, is looking to recruit three Assembly Operatives to join their busy CCTV Production Department on a temporary-to-permanent basis. This is a fantastic opportunity for candidates with assembly experience to join a growing business with genuine long-term career prospects. The Role As an Assembly Operative, you will be responsible for assembling CCTV products within a production environment. This is a hands-on role involving bench assembly, standing for periods of the shift, and general manual assembly duties. Candidate Requirements We're looking for individuals who have: Previous mechanical assembly experience. Electrical assembly experience, such as cable preparation or cable termination, is advantageous but not essential. Experience working within an assembly line, manufacturing, or repetitive production environment. Excellent attention to detail and the ability to follow work instructions. A reliable, hardworking attitude and a strong work ethic. The ability to work effectively as part of a team. Working Hours Monday to Thursday: 8:00am – 4:45pm Friday: 8:00am – 12:30pm Overtime is available to meet business demands and is paid at time and a half for any hours worked after 12:30pm on Fridays. What's on Offer £14.24 per hour Temporary-to-permanent opportunity Overtime available Early finish every Friday Opportunity to secure a permanent position with our client Immediate starts available If you have experience in assembly or manufacturing and are looking for your next opportunity with a reputable employer, we'd love to hear from you. Call Lewis on (phone number removed)

Looking for reliable, well-paid night work with little to no handball? This could be exactly what you’re after. We’re recruiting experienced Class 1 (C+E) Drivers for ongoing trunking work based in Nottingham, delivering to Regional Distribution Centres (RDCs) across the Midlands. Whether you’ve worked with DPD, Eddie Stobart or Wincanton, you’ll feel right at home in this professional, well-organised operation. Why you’ll love this role: £18.15-£23.52 per hour (paid weekly) Regular night shifts – 16:00 starts Consistent, ongoing work (full-time & part-time available) Clean trunking work – minimal manual handling Modern fleet & well-maintained vehicles Free on-site parking Opportunity for temp-to-perm positions Key Responsibilities: Trunking runs to RDCs across the Midlands Minimal handball – mostly depot-to-depot Completing vehicle checks and paperwork Keeping to delivery schedules and legal compliance Working closely with a supportive transport team What We’re Looking For: Valid HGV Class 1 (C+E) licence Up-to-date CPC & Digi Tacho card 6 months experience required class 1 Reliable, punctual, and professional attitude * Good understanding of driver hours & regulations Ready to take the next step? Contact Aligra today to find out more and apply

Our client, Nottingham Community Housing Association, is looking for a locum Senior Payroll Officer to join their service. Main responsibilities Prefer to be familiar with ITrent Administer and maintain all NCHA Group payroll and pensions systems and records e.g. colleague expenses, statutory payments, absence procedures as per current statutory rules and regulations within agreed timescales. Operate all payroll control accounts and systems (such as net pay and pension) to ensure completeness and accuracy of transactions and records so as to meet NCHA Group's obligations to colleagues, employer and external bodies. Ensure that all records relating to the section are accurate and up-to-date and all appropriate control accounts are reconciled on a regular basis; taking corrective action where necessary. Extract and analyse data from both the financial and payroll systems, draft returns and various reports where required. Assist in period and year end payroll close down procedures; producing the relevant internal and external documentation to required deadlines. Contribute to system and operational development including procedure manuals. Identify where corrective action is required; liaising with internal and external stakeholders to recommend corrective action. Answer complex payroll related queries within agreed time limits; ensuring confidentiality of information at all times according to Data Protection Act. Assist in the production of statutory and financial accounts and reports of NCHA Group; assisting internal and external auditors as required. Provide input to processes for business transformation in the provision of financial management services to the NCHA Group. Develop and maintain working relationships with customers. Provide cover across roles in the directorate when required. Maintenance and administration of appropriate manual and computerised records, and reconciliations thereon within agreed timescales; taking corrective action where required. If you are interested in this role please send your updated CV in the first instance

Sheet Metal Fabricator | Nottingham Based | Monday - Friday Full Time | 08:00-17:00 Early Finish on Friday £14.40 Per Hour | X1.5 Rate After 40 Hours (Once Perm) | Temporary To Permanent 16 Weeks Basic knowledge required, candidate must be confident using hand tools and experience drilling holes. You will be working for a manufacturer of all types of low voltage distribution switchgear and control panels. We are seeking a skilled Sheet material fabricator / technician to join our production team. Specialising in electrical components, you will process non-conductive plastic sheet and bar stock into precise insulating barriers, combining advanced CNC routing with manual fabrication and light electrical assembly duties. Key Responsibilities Plastic Fabrication: Accurately mark out, cut, drill, and punch plastic materials. Machine Operation: Operate CNC routers and manual bending/folding machines and guillotines to form protective screens and electrical insulators. Assembly Support: Assist with the assembly of electrical cabinets, using hand tools, fasteners, and torque tools for precision fitment. Quality Assurance: Ensure all safety-critical insulation parts meet tight technical specifications. Job Requirements Previous experience in sheet material (polycarbonate/Lexan) fabrication, sheet metal, or joinery. Ability to interpret technical drawings or schematics. Proficiency with CNC routers and manual workshop machinery. High attention to detail and ability to work with precision. Physically fit for manual workshop tasks.If you are interested in this role, apply or call Alex on (phone number removed) Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Dutton Recruitment (Sheffield Engineering) are recruiting We are looking for a General Operative for a permanent position based with our client in Nottingham. Immediate start available (subject to interview process) Salary is £28,500 per annum (depending on experience) This opportunity would suit someone who enjoys a varied role within a growing engineering environment and is keen to develop their skill set. General Operative - Key Requirements: Ability to competently use power tools and hand tools Experience working in a manufacturing, engineering, or similar trade environment (e.g. electrical, joinery) Proactive, reliable, and with a positive attitude to work Good understanding of health & safety practices Willingness to support across fabrication, assembly, and workshop activities Crane operator licence and/or forklift licence would be highly advantageousStores / Warehouse Skills (Desirable for Cross-Functional Role): Experience with: Picking, packing, and despatch processes Stock control systems including computer-based systems Goods-in inspection and put-away Supporting final QC preparation and workflowUnderstanding of: Manual handling regulations (HSE L23 / HSG6) Safe loading/unloading of vehicles PUWER and LOLER awareness Banksman advantageous Counterbalance forklift licence (RTITB / AITT accredited) preferred Familiarity with ISO 9001:2015 quality systems, document control, and site HSE proceduresAdditional Requirements: Willingness to obtain SC Clearance (company-funded if not already held) Ability to pass a DBS check if not already held Clean driving licenceIn the first instance, send CV's to (url removed) or call the team on (phone number removed) (option 1) for Engineering. Dutton Recruitment are working as an Employment Business on behalf of our client

Job DescriptionAt The Sofa Delivery Company, we know that a sofa is one of the most meaningful things someone can buy.Thats why were on a mission to be the best two-person delivery company around, delivering great experiences to our customers that count. As part of the DFS group, we deliver for our group brands - DFS and Sofology.Our colleagues are given the tools, training and support to make moments matter. We recognise and reward our people for going the extra mile, for our customers and each other.Whether youre in the warehouse, out on the road, or in a customers home, at The Sofa Delivery Company, youll deliver moments that matter.Across our Group, we're committed to a culture where everyone feels welcome, valued, and can thrive at work. We celebrate diverse voices, champion inclusion, and support each other through our growing colleague networks.We invest in partnerships that drive change, from supporting Doncaster Pride and introducing the Hidden Disabilities Sunflower, to partnering with Carers UK and developing leaders with Diversity in Retail.We're proud to be an equal opportunities employer, committed to building a workplace that reflects the communities we serve. So, if your experience doesn't quite match the specification, we'd still really love to hear from you.What you'll be doing- Operating HGV/Class 1 runs from our Nottingham Site- Complete all deliveries into customers homes in a safe and professional manner.- Communicate effectively with the customer prior to delivery to ensure that they know youre on your way to their address.- Ensure furniture is delivered to the room requested by the customer and that we do not leave them with any rubbish to dispose of.- Represent The Sofa Delivery Company values and those of our brand partners in everything that you do.- Work with your team and senior managers to provide feedback and continually improve the standards of service we offer.- Carry out daily inspections of allocated vehicles and equipment, informing the line manager of any defects/missing items immediately.- Comply with all driving laws as defined by the government and all company policies and procedures.The role is for you if...- You hold a HGV / Class 1 License, Digi Tacho, CPC Card and valid UK manual driving licence (minimum 12 months, max 6 points).- Youre great with people and enjoy helping customers.- Youve got strong time management skills and thrive on variety.- Youre comfortable installing and lifting heavy furniture in different home settings.- You take pride in your work and value safety of yourself and those around you.- Youre ready to work as part of a supportive two-person team.At The Sofa Delivery Company, we believe in rewarding hard work and making every day enjoyable. Heres what we offer:- Great Pay: A competitive salary plus a quarterly bonus for delivering amazing service.- Generous Discounts: 30% off DFS and Sofology products for you, plus 15% for friends and family.- Wellbeing Support: Access to a range of perks, including retailer discounts, free on-site physio sessions, and health services.- Career Growth: Tools, training, and support to help you grow with us.- Enhanced Leave: Maternity, paternity, adoption leave, and more.Were committed to a culture where everyone feels welcome, valued, and can thrive at work. We celebrate diverse voices, champion inclusion, and support each other through our growing colleague networks.We invest in partnerships that drive change, from introducing the Hidden Disabilities Sunflower and supporting Doncaster Pride, to partnering with Carers UK and developing leaders with Diversity in Retail.We're proud to be an equal opportunities employer, committed to building a workplace that reflects the communities we serve. So, if your experience doesn't quite match the specification, we'd still really love to hear from you.Join us, and lets deliver moments that matter - together.TPBN1_UKTJ

Manual Machinist Contek Recruitment Solutions are representing a well-established precision engineering business based in the Jacksdale area. Operating for over 75 years, our client specialises in large-scale manual milling and has recently expanded their capabilities to include CNC milling alongside their established manual machining services.Serving a diverse customer base across multiple industries, the company prides itself on delivering high-quality, precision-engineered components and solutions. Due to a continued influx of long-standing contracts and sustained business growth, they are now looking to recruit an experienced Manual Machinist to join their skilled engineering team.The Successful Machinist Package £28,000 to £32,000 per annum (OTE up to £51,500 per annum)Permanent day shift: Monday to Thursday: 7:00am 3:30pmFriday: 7:00am 2:30pmOvertime available (paid at 1.5x rate, up to 11 hours per week)33 days holiday (including bank holidays and one fixed week)Monthly and annual bonus schemesHoliday Enhancement Pay (HEP)Competitive salary sacrifice pension schemePension advice and supportDeath in service insuranceAnnual health screeningOn-site parkingCycle to Work schemeFull PPE provided, including safety footwear, gloves, eye protection (including prescription safety glasses), hearing protection and moreAll tooling and precision measuring equipment suppliedOveralls provided and professionally launderedRefreshments provided throughout the working dayAdditional employee perks and social eventsThe Successful Machinist Requirements Previous experience operating 3-axis manual milling machinesExperience machining large components would be advantageousAbility to read and interpret engineering drawingsCompetent in milling, drilling, boring and tapping operationsAbility to inspect own work using a range of measuring equipment including: DTI gaugesVerniersMicrometersSlip gaugesDepth gaugesOverhead crane experience would be advantageousStrong attention to detail and commitment to producing high-quality workIf you are an experienced Manual Machinist looking to join a stable and growing engineering business with excellent earning potential, we would like to hear from you.TPBN1_UKTJ

CNC MachinistLocation: NottinghamCommutable from: Leicester, Loughborough, Hinckley, Coalville, Market HarboroughSalary: £35,000 £38,480 per yearShift: Day shift, flexible start & finish timesAbout the CompanyThis is a progressive engineering company offering opportunities for skilled individuals with a strong background in machining and manufacturing to develop within a growing team.The RoleWe are currently recruiting for experienced CNC Turner to join a busy engineering team in Nottingham. We are interested in candidates with experience as:CNC TurnerManual TurnerCNC Turner ProgrammerThe role involves producing high-quality precision engineered components while working to technical drawings and specifications within a fast-paced manufacturing environment.Responsibilities include:Setting and operating CNC turning machineryOperating manual turning machinery where applicableProducing components to engineering drawings and specificationsEditing and adjusting programmes to improve machining efficiency and accuracyCarrying out routine machine maintenance and inspectionsLoading materials and managing tooling requirements safelyConducting quality inspections using measuring equipment and hand toolsMaintaining a clean and safe working environmentAbout YouProven experience within an engineering or manufacturing environmentExperience as a CNC Turner or Manual TurnerExperience using Prototrak, Siemens, Fanuc or Winmax controlsStrong understanding of tooling, fixtures and machining processesAbility to read and interpret technical drawings accuratelyCompetent using measuring equipment and hand toolsGood understanding of materials and tooling selectionStrong attention to detail and quality standardsHow to ApplyTo apply for the CNC Machinist position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and next steps.TPBN1_UKTJ

Job Description:Our client specialise in high-speed CNC machining of quality precision milled parts in aluminium, non-ferrous metal and plastic. Based in Stapleford Nottingham, Proactive Staff are looking for a great milling CNC machine setter to join their team.Whats in it for you / Benefits:£30K-£38.5K per annum (depending upon experience)7:30am 16:30pm Monday Thursday, 7:30am 12:30pm FridayImmediate startSuccessful placements will lead to a permanent contractKey Responsibilities:Program and Setting multi axis CNC milling machines to produce components for Aerospace, rail and automotive sectorsDevelop and write CNC programs using G-code, M-code, or CAM software.Set machining parameters such as speeds, feeds, cutting depths, and tool paths.Optimize CNC programs to improve efficiency, reduce cycle times, and minimize material waste.Perform quality control checks using precision measuring instruments.Follow all safety protocols and maintain a clean work environment.Skills & Experience:Previous programming experience with CNC MachinesComprehensive knowledge of FanucProven track record of excellent attendance and reliabilityAbility to read and interpret technical drawings and blueprints.Good manual dexterity and hand-eye coordination.Ability to work independently and as part of a team.How to Apply:Call Sandra at Proactive Staff or click apply. You must have recent work references available and able to start immediately.Proactive Staff is an equal opportunities Recruitment Business advertising on behalf of our client.TPBN1_UKTJ

Senior Payroll Officer (Hybrid) needed in Nottingham, £18.56ph PAYE - Reference: OR107760 \n 3 days remote 2 days in the office \n\n • Administer and maintain all NCHA Group payroll and pensions systems and records e.g. colleague expenses, statutory payments, absence procedures as per current statutory rules and regulations within agreed timescales.\n, • Operate all payroll control accounts and systems (such as net pay and pension) to ensure completeness and accuracy of transactions and records so as to meet NCHA Group's obligations to colleagues, employer and external bodies.\n, • Ensure that all records relating to the section are accurate and up-to-date and all appropriate control accounts are reconciled on a regular basis; taking corrective action where necessary.\n, • Extract and analyse data from both the financial and payroll systems, draft returns and various reports where required.\n, • Assist in period and year end payroll close down procedures; producing the relevant internal and external documentation to required deadlines.\n, • Contribute to system and operational development including procedure manuals.\n, • Identify where corrective action is required; liaising with internal and external stakeholders to recommend corrective action. \n, • Answer complex payroll related queries within agreed time limits; ensuring confidentiality of information at all times according to Data Protection Act.\n, • Assist in the production of statutory and financial accounts and reports of NCHA Group; assisting internal and external auditors as required.\n, • Provide input to processes for business transformation in the provision of financial management services to the NCHA Group.\n, • Develop and maintain working relationships with customers. \n, • Provide cover across roles in the directorate when required.\n, • Maintenance and administration of appropriate manual and computerised records, and reconciliations thereon within agreed timescales; taking corrective action where required.\n\n \n This is a full time role on a temporary contract basis. \n \n If you are interested in the role please apply on our website with your CV, alternatively you can email your CV to quoting the reference number. \n \n Essential Employment is acting as an Employment Business in relation to this vacancy. Essential Employment is an Equal Opportunities Employer. \n \n All our roles may be subject to pre-employment checks including references so please be prepared. \n \n Due to high volumes of CVs received we are not able to respond to all unsuccessful applications. You will always however hear from us by phone if we are able to take your CV forward to the next stage. \n \n You can also follow us at Twitter/Facebook/LinkedIn or via our website \n \n \n

Warehouse & Distribution Operative 📍Nottingham 💰£26-£27k (plus shift allowance) Responsible for supporting daily production and shipping activities to meet logistics requirements. The role involves handling finished goods, packaging, stock control, and dispatch operations within a fast-paced warehouse environment. Key Skills Read and follow work instructions accurately across all operations Package products to meet customer specifications Load and unload delivery vehicles Pack and unpack cartons Operate packaging machinery where required Support general warehouse and logistics tasks as directed Key Skills IT Skills, including SAP (or similar) Experience with shipping software Understanding of shipping procedures (electronic and manual documentation) FLT experience is an advantage Reliable and able to work both independently and as part of a team Comfortable in a fast-paced warehouse setting

VEHICLE TECHNICIAN / VEHICLE MECHANIC Location: Nottingham Salary: £36,000 Basic Salary DOE | OTE £43,000 Hours: Monday - Friday 08:00 - 18:00 & Saturdays on a rota (08:30 - 13:30) Job Type: Full-Time, Permanent Looking for a role where your skills are valued, your earnings are rewarded and you can enjoy long-term stability? This is an excellent opportunity for an experienced Vehicle Technician / Vehicle Mechanic to join a successful dealership environment offering strong earning potential, excellent benefits and a supportive team culture. If you're looking for a role with a healthy work-life balance, modern facilities and opportunities to further develop your career, this could be the perfect next move. What's In It For You? - 22 Days Holiday Plus Bank Holidays - Toolbox Insurance - Employee Discount Scheme - Referral Programme - Personal Accident Insurance - Pension Contributions up to 7% - Company Car Scheme - Stable and supportive working environment The Role As a Vehicle Technician, you'll be responsible for delivering high-quality servicing, maintenance and repair work while ensuring the highest standards of workmanship and customer satisfaction. Responsibilities include: - Carrying out servicing, maintenance and repair work efficiently - Performing a variety of diagnostic and technical operations - Completing assembly operations to manufacturer standards - Ensuring all work complies with safety and quality procedures - Maintaining accurate job cards and service documentation - Providing excellent customer service and technical advice - Working closely with colleagues to maximise workshop efficiency About You - NVQ Level 3 in Vehicle Maintenance and Repair is essential - Minimum 2 years' experience as a Vehicle Technician / Vehicle Mechanic / Motor Vehicle Technician - MOT Licence desirable but not essential - Must own your own tools and toolbox - Full UK Manual Driving Licence required (subject to licence checks) - Right to work in the UK is essential - sponsorship is not available - Team player with a strong work ethic and excellent attention to detail Apply Today This is a fantastic opportunity to join a business that offers excellent earning potential, great benefits and long-term career stability. If you're an experienced Vehicle Technician / Vehicle Mechanic looking for your next challenge in Nottingham, we'd love to hear from you

Payroll Position - Great company offering Great BenefitsHybrid and free car-parkingThis is a great opportunity to join a well respected firm of Accountants at their Nottingham offices reporting to a Payroll Manager.The position will be extremely varied and offers lots of client contact. The successful candidate an work hybrid if desired and work - 3 days in office.To apply for this position you must have strong payroll skills and expertise preferably gained in a professional practice environment or payroll bureau.Preparation of weekly and monthly client payrolls using Iris Payroll Professional softwareAdministration of payrolls ensuring employee records are up to date including developing and maintaining excellent client relationsLiaise with HM Revenue & Customs to resolve any client issuesPreparing year end returns and routinesAssisting the Payroll Manager as necessary and acting as cover for other Payroll TechniciansProviding support and client information to colleagues throughout the business to assist in excellent client serviceAttend internal and occasional external training sessions to ensure working knowledge is up to dateSkills and Qualities requiredMinimum of two years practical experience of payroll processing, preferably in a payroll bureau environment or within practiceExperience of payroll calculations and processing, including manual calculationsHave a working knowledge of payroll legislation and statutory paymentsHave a thorough understanding of the RTI legislation and Auto Enrolment legislation and the practical effect on client payrollsAble to take responsibility for own portfolio of payrolls communication of and consistent meeting of deadlinesProficient and confident with IT, especially MS OfficeExperience of IRIS Payroll Professional (IPP), Earnie, Xero Payroll, Sage Payroll would be an advantage. Cloud based softwareThe successful person will be motivated and committed to provide an excellent service to both clients and to colleagues. This is a fantastic opportunity to work for a really lovely business who are very forward thinking and genuinely care about their staff.Keywords: NG1/NG2/Payroll Manager/Payroll Supervisor/Payroll ClerkTPBN1_UKTJ

About The RoleRight across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in afriendly, fun and respectful environment where you are encouraged to thrive.Where will you be working?At M Group Energy were enabling the energy essential to support our lives.We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation.This role will be within ourTransmission & Renewablesteam. We design, build and commission substations at voltages up to and including 400kV. Our teams construct and maintain transmission lines and substations, ensuring the efficient and reliable delivery of electricity.What will you be doing?We're looking for a Senior Design Engineer (OHL) to join our Design team in ourAnnesley,Nottinghamoffice on a Hybrid basis.Within the role you'll be providing support to the Design Lead and Client in solving issues related to Overhead Lines, perform the calculations and assessment as required in software or by manual calculations. You'll support the management of multiple design tasks or workstreams and balance competing project priorities.If you're an expert inindustry standard line design software PLS CADD and TOWER and their interaction with OHL design standards,this role could be for you!- Lead the development of design solutions, including detailed calculations, drawings, reports and assessments.- Undertake and check technical work, ensuring designs comply with relevant standards, specifications and client requirements.- Provide expert technical input on complex engineering issues and support resolution of design challenges.- Ensure design deliverables are completed to a high professional standard and within required timescales.- Carry out site surveys, inspections and investigations to inform design development.- Interpret site data, constraints and conditions to ensure robust design solutions.- Engage with delivery or subcontract teams during site activities where design input is required.- Collaborate with internal teams including engineers, technicians, project managers and delivery colleagues to ensure coordinated and integrated design outputs.- Liaise with clients, external stakeholders and supply chain partners to support design discussions, approvals and technical clarifications.- Ensure all design outputs comply with organisational quality standards, statutory requirements and safety obligations.- Apply internal governance processes, including design reviews and technical assurance stages.- Promote continuous improvement and identify opportunities for innovation or enhanced engineering practices.What youll bring:- Expert understanding of industry standard line design software PLS CADD and TOWER and their interaction with OHL design standards.- Have 5 years or more experience in OHL Design.- Have clear knowledge of different types of overhead line towers, conductors, insulators and fittings.- Knowledge of various types of overhead line foundations is desirable.- In depth understanding and experience of delivering various design outputs for construction of overhead line. Some of the examples include line design, clearance investigations, structural analysis, optioneering reports, line profiles, string drawings, schedules and sag tensions etc- Maintain an up-to-date working knowledge of National Grid, SPEN, SSE, BSI, ENA and other relevant industry standards.- Chartered Engineer of IMechE/ICE/IStructE or working towards chartership is desirable.Whats in it for you?- 25 days annual leave plus bank holidays- Company car and fuel card with a range of EV and hybrid vehicles to choose from- Private health care and health care cash plan- Matched or contributory pension scheme- Online GP service, 24 hours a day, 365 days a year- Employee assistance programme- Life assurance- Cycle to work, salary finance and give as you earn schemes- Enhanced maternity, paternity leave and adoption leaveAbout usWe want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs.Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours.Were responsible and go further for our people, clients, communities and the planetWere open and seek new and better ways of exceeding expectationsWere together and as one team; the whole is greater than the sum of the partsWere ambitious and embrace opportunity, to lead essential infrastructure services for lifeWhether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development.Its an exceptional time to be a part of M Group.Please note:Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered.For certain roles, successful candidates will be subject to 3rdparty background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding.#MGroupE#LI-SG1 #LI-Hybrid INDREGTPBN1_UKTJ

We are currently recruiting for a reliable and professional 7.5T Driver/Warehouse Operative to join our client's team based in Nottingham.You will play a key role in ensuring timely and safe deliveries to their customers, while representing our company to a high standard.The rate of pay is £31,297.70 per annum.Various hours are available between 6am - 3:30am!Your Time at WorkAs a 7.5T Driver your role will include:- Deliver goods across regional routes- Loading and unloading goods safely- Ensuring all deliveries are completed on time and in full- Completing delivery paperwork and using handheld scanners- Performing daily vehicle checks and reporting any defects- Maintaining compliance with health & safety and driving regulations- Providing excellent customer service on deliveryOur Perfect WorkerOur perfect worker will:- Valid UK Category C1 (7.5T) driving licence- Driver CPC qualification and Digi Tacho card- No more than 6 penalty points (no DR, DD or IN convictions)- Physically fit - some manual handling will be required- Good communication and time management skills- Previous 7.5T driving experience essential- Knowledge of the local areaExperience in a similar role is required.Key Information and Benefits- Earn £31,297.70 per annum- Various hours- Free car parking on site- Uniform provided- PPE provided- Performance bonus- Full training provided- Local reward schemesJob Ref: 1BUNZLHCAbout StafflineStaffline is the UK's largest recruitment solutions partner, enabling over 35,000 people into good work every week. We operate at more than 420 customer sites across England, Scotland and Wales.As one of the most established recruitment agencies in Nottingham with operations across the UK, we specialise in connecting businesses with temporary and permanent jobs across warehouse & logistics, food and drink, aviation, driving, technical & engineering, manufacturing & automotive and security.Important Information- Staffline and its subsidiaries do not charge any recruitment or job-seeking fees at any stage of the hiring process.- This job advert may not be copied, imitated, or used, in whole or in part, by third-party websites, without prior written consent from Staffline.- Our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change.TPBN1_UKTJ

Job Title: DriverLocation: NottinghamHours: Zero HourSalary: £12.71Benefits:Company pension schemeEmployee discount schemeFunded Summer and Christmas eventsCycle to work schemesDiscounted car hire ratesFriendly and supportive working environmentRole Overview:As a Service Delivery Agent, you will ensure all vehicles are thoroughly cleaned and inspected throughout the workday. You will conduct thorough inspections, identifying any pre- and post-rental damage, following Switchs management processes.Key Responsibilities:Deliver and collect vehicles from various locationsIdentify and record vehicle damage using appropriate documentation/systems per Switch's damage management procedurePerform comprehensive vehicle safety checks before delivery and at quality inspection stagesAccurately and clearly complete fuel sheetsDebowse vehicles as instructed, adhering to safety guidelinesClean vehicles thoroughly to meet company standards and customer requirementsUndertake security checks and verify rental documentation as requiredComplete any necessary paperworkComply with all Switchvehicle proceduresCommunicate accurately and appropriately, both verbally and in writingDrive carefully and consideratelyDress according to company uniform standards, maintaining a clean and smart appearanceAct as an ambassador of the company, promoting company interests at all timesIdeal Candidate:Driving Skills: Holds a full manual driving license for a minimum of 12 months. Demonstrates careful and considerate driving behaviour, ensuring the safety of passengers, vehicles and other road usersFlexibility: Exhibits a flexible approach to working hours, rotas and locationsAttention to Detail: Has an eye for detail, particularly when conducting vehicle inspections and documenting any damage. Ensures thoroughness in vehicle safety checks, cleanliness and maintenanceCommunication Skills and customer service orientatedOrganizational Skills: Efficiently manages time and tasks, ensuring timely delivery and collection of vehiclesSafety Conscious: Prioritises safety in all tasks, adhering to company procedures and guidelines. Ensures vehicles are roadworthy and meets all safety standards before use.About Us:Switch is the largest privately-owned leasing company in the UK, with 85 locations nationwide. We have become one of the leading rental companies in the UK, thanks to our comprehensive fleet and excellence in customer service. With our growth come amazing opportunities to join our family business, where our people continue to remain at the heart of everything we do!Apply now and be part of our team driving growth and success!TPBN1_UKTJ

Company Description Experian is a global data and technology company, powering opportunities for people and businesses around the world. We help to redefine lending practices, uncover and prevent fraud, simplify healthcare, create marketing solutions, and gain deeper insights into the automotive market, all using our unique combination of data, analytics and software. We also assist millions of people to realize their financial goals and help them save time and money.We operate across a range of markets, from financial services to healthcare, automotive, agribusiness, insurance, and many more industry segments.We invest in people and new advanced technologies to unlock the power of data. As a FTSE 100 Index company listed on the London Stock Exchange (EXPN), we have a team of 22,500 people across 32 countries. Our corporate headquarters are in Dublin, Ireland. Learn more at experianplc.com.Job Description We are looking for a Site Reliability Engineer to improve the reliability, and performance of business-critical systems. Reporting into our Head of SRE you will focus on AWS cloud infrastructure, DevOps tooling, and core SRE practices within a distributed, production environment.Main Responsibilities:Leadership & Strategy Define and implement SRE best practices across the organization.Proven expertise in production support, engineering, disaster recovery (DCR), automation, and cloud operationsMentor and guide a team of SREs, fostering growth.Collaborate with senior stakeholders to align reliability goals with business objectives.Reliability & Performance Establish SLIs, SLOs, and SLAs for critical services and ensure adherence.Drive initiatives to improve system resilience and reduce operational toil.Excellent in designing systems that detect and remediate issues without manual intervention Self Healing systems, Runbook automationExposure to tools like Gremlin, Chaos Monkey, AWS FIS to simulate outages and improve fault toleranceIncident Management Act as the primary point of escalation for critical production issues and lead major incident response, root cause analysis, and postmortems.Perform detailed post-incident investigations to identify underlying causes. Document findings and share learnings to prevent recurrence.Implement preventive measures and continuous improvement processes.Observability Champion monitoring, logging, and alerting strategies using tools like Prometheus, Grafana, ELK, and AWS CloudWatch.Build real-time dashboards to visualize system health and reliability metrics.Configure intelligent alerting based on anomaly detection and thresholds.Combine metrics, logs, and traces to enable root cause analysis and reduce Mean Time to Resolution (MTTR).Knowledge of AIOps or ML-based anomaly detection for proactive reliability management.Collaboration Work closely with development teams to integrate reliability into application design and deploymentPromote a culture of shared responsibility for uptime and performance across engineering teams.Qualifications Deep expertise with various AWS services. Advanced knowledge of monitoring and observability tools.Strong leadership capabilities with a focus on setting clear direction, aligning team efforts with organizational goals, and maintaining high levels of motivation and engagement across the team.Excellent communication skills, with the ability to articulate complex ideas, solutions, and feedback clearly to both technical and non-technical stakeholders. Adept at managing conflict constructively and facilitating consensus.Proven track record of building secure, mission-critical, high-volume transaction web-based software systems, preferably in regulated environments (finance and insurance industries).Hands on technologist working in software development includingleading anSRE team.Additional Information Hybrid working, 2 days a week our Nottingham OfficeGreat compensation package and discretionary bonusCore benefits include pension, bupa healthcare, sharesave scheme and more25 days annual leave with 8 bank holidays and 3 volunteering days. You can purchase additional annual leave.Our uniqueness is that we celebrate yours. Experian's culture and people are important differentiators. We take our people agenda very seriously and focus on what matters; DEI, work/life balance, development, authenticity, collaboration, wellness, reward & recognition, volunteering... the list goes on. Experian's people first approach is award-winning; World's Best Workplaces 2024 (Fortune Top 25), Great Place To Work in 24 countries, and Glassdoor Best Places to Work 2024 to name a few. Check out Experian Life on social or our Careers Site to understand why.Experian is proud to be an Equal Opportunity and Affirmative Action employer. Innovation is an important part of Experian's DNA and practices, and our diverse workforce drives our success. Everyone can succeed at Experian and bring their whole self to work, irrespective of their gender, ethnicity, religion, colour, sexuality, physical ability or age. If you have a disability or special need that requires accommodation, please let us know at the earliest opportunity.Experian Careers - Creating a better tomorrow togetherFind out what its like to work for Experian by clicking here#LI-HybridExperian Careers - Creating a better tomorrow togetherFind out what its like to work for Experian by clicking hereTPBN1_UKTJ

Site Manager – Nottingham – Facades Our client are a leading Facades subcontractor with sites in and around Nottingham, they are looking for an experienced Site Manager to manage a Project invloving external wall insulation and rendering. Tasks/ Responsibilities: Ordering of Labour Ordering of Materials Identify and resolve any issues with the project To be a point of contact for our client. Skills/ Qualifications required: SMSTS CSCS First Aid Certificate Absbestos Awareness Manual Handling Experience with FieldView MUST HAVE experience in external wall insulation MUST HAVE experience in facades To find out more about this position as a Site Manager in Nottingham, call Lilly of CPR Recruitment CPR Recruitment are currently on over 500 sites in Kent and London. If this role isn't for you due to location or project type get in touch via the numbers above to find out about our other opportunities within the white collar side of construction

A fast-growing national gaming machine provider has created a new opportunity for experienced gaming machine field service engineer to join their team. They are looking for someone based in or around Nottingham region . The position offers a comparative salary up to £35k with additional bonus of up to £3K p/a with door to door pay. You'll have a chance to work with most recognisable pub chains and hospitality venues carrying out servicing, repair and installations of gambling machines, pool tables and juke boxes. The position has been reacted due to recent winnings of big contracts. You will receive training, ongoing upskilling programme and career development .Responsibility of gaming machine field service engineerInstall and service gaming equipment across pubs and hospitality venuesAct as the first point of contact for customers, delivering friendly and efficient supportMaintain strong customer relationships to ensure the company is professionally representedCarry out manual handling tasks safely, following all Health & Safety requirementsTravel daily to customer sites using a company vehicleRequirements of gaming machine field service engineerExperience servicing gaming machines such as gambling machines, pool tables or juke boxes.Strong technical and electrical servicing skillsExcellent interpersonal skills and confidence working with the publicA full UK driving licenceBenefits of gaming machine field service engineerEarn up to £35,000 per annum, plus opportunities for overtime.On average £3,000 a year bonusCompany car available for personal use28 days annual leave with increasing each year by 1 day.If you're an experienced gaming machine field service engineer with a passion for delivering quality work and exceptional customer service, we'd love to hear from you. Apply now and take your career to the next level!TPBN1_UKTJ

Manual Turner Required! Our client is rapidly growing engineering company, specialising in machining and heat treatment. On behalf of our client, we are looking to recruit an experienced Manual Turner. The successful candidate will set up and operate manual lathes to produce high-quality precision components in accordance with engineering drawings, customer specifications, and company quality standards. Package: 20 days holiday plus bank Contractual profit sharing scheme 40 hour working week with early finish on Fridays (6:30am - 3:30pm Monday to Thursday, 12:30pm finish Fridays) Hourly rate £14.50 - £21 per hour (DOE)Manual Turner - Responsibilities: Set up and operate manual centre lathes and/or other turning equipment safely and efficiently Machine components to tight tolerances from engineering drawings and technical specifications Carry out in-process inspection using verniers, micrometers, bore gauges, and other precision measuring equipment Ensure all work meets required quality standards and customer specifications Interpret engineering drawings, including GD&T where applicable Carry out routine machine maintenance and ensure equipment is kept in good working order Maintain a clean, safe, and organised working environment in line with 5S and HSE standards Work effectively as part of a small machining team to meet production deadlinesManual Turner -Requirements: Proven experience as a Manual Turner or Manual Machinist in a precision engineering environment Strong ability to work from and interpret engineering drawings Experience with CAD software (e.g. SolidWorks, AutoCAD) is desirable Competent in the use of precision measuring equipment (micrometers, verniers, bore gauges, etc.) Good understanding of machining techniques, materials, and tooling Ability to work to tight tolerances and high-quality standards Experience working with one-off and small batch production Streamline Search is acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application

Weekend HGV Class 1 Driver (Saturday & Sunday Only)JT Recruit is currently recruiting HGV Class 1 Drivers on behalf of our client based in Eastwood .This is a weekend-only position , working Saturday and Sunday , delivering fresh bakery products across your assigned route. You will be responsible for the company vehicle and maintaining excellent customer service standards while representing the client's brand.The RoleSaturday & Sunday work onlyStart times available between 03:00 and 20:00 (preferred start times considered)1012 hour shiftsModern vehicles with the latest technologyTrunking work no multidrop deliveriesSome manual handling required (moving cages on and off trailers)Long-term ongoing work availableRequirementsValid UK HGV Class 1 LicenceValid CPC and Digital Tachograph CardMaximum 6 points for minor offencesGood understanding of transport legislation and tachograph regulationsExcellent customer service skillsReliable, punctual, and dependablePay RatesSaturday Days: £20.32 per hourSaturday Nights: £23.88 per hourSunday Days: £27.09 per hourSunday Nights: £31.84 per hourFor more information about this Weekend Class 1 Driver role, please contact KimTPBN1_UKTJ

The roleTitle: Joiner Multi-Skilled (known internally as Carpenter - Multi-Skilled)Location: East MidlandsSalary: £33,299 - £35,052Working hours/pattern: 40 hours per week between 8am - 6pm. To support our residents, you will be required to participate in second shift and an out of hours on-call service on a rotational basis. Company van and fuel card provided.Requirements:Experience- Previously worked in a social housing or local authority environment- Relevant NVQ2 qualification or equivalent trade experienceDriving- A full UK manual driving licence (you will provided with your own Metworks van for working hours).- A minimum of one year of significant driving experience. (MTVH reserves the right to withdraw an offer of employment if company fleet policy is unable to secure adequate insurance.)Please refer to the full job description before applying.Why work for us?We offer:- Competitive salary- 29 days annual leave, plus bank holidays, plus the option to buy or sell up to 5 days.- Up to 9% matched pension contribution- Health Cash Plan and Life Assurance Scheme (3x your salary)- Many more excellent benefits and opportunities (Full details can be found below).To meet our commitment to providing safe, high quality services to our customers we will complete a standard level background check with the Disclosure and Barring service, once an offer of employment is made. As standard you will be added to the DBS updating service with a new check being carried out on a 3 yearly basis. The cost of a DBS will be paid for by the organisation.TPBN1_UKTJ

Legal & General (L&G) is a leading UK financial services group and major global investor. We’ve been safeguarding people’s financial futures since 1836, and strive to build a better society, while improving the lives of our customers and creating value for shareholders. We are one of the world’s largest asset managers and provide powerful asset origination capabilities. Together, these underpin our retirement and protection solutions: we are an international player in pension risk transfer, in UK and US life insurance, and in UK workplace pensions and retirement income. L&G Retail supports the savings, protection and retirement needs of around 14 million people, through our portfolio of retail and workplace businesses. Our Retail division helps people enjoy a more colourful retirement, both directly and through their employers, including Lifetime Mortgages, Retirement Interest Only Mortgages and financial advice on our range of lending products. We are the UK’s number one individual life insurer, and also provide Group Protection products for employers – all helping people to plan for the unexpected. We support home buying through our Mortgage Club – the UK’s largest – and our award-winning Surveying Services team. And our fintech team finds and supports socially useful start-ups and scale-ups working in the workplace, home, insurance and wealth areas. Joining us means helping create brighter financial futures for all our customers. We are seeking a skilled RPA Developer to join our dynamic team. In this role, you will be responsible for the design, development, maintenance, and support of Robotic Process Automations (RPA) using Blue Prism, as well as solutions built with Visual Basic for Applications (VBA), across our DC Operations. The ideal candidate will bring a creative and pragmatic approach to problem-solving, identifying opportunities to streamline manual processes through automation. You will play a key role in driving operational efficiency while ensuring robust change control practices are followed and measurable benefits are consistently tracked. What you'll be doing: • Ensuring the ongoing performance and reliability of RPA solutions and VBA applications across DC Operations. Promptly resolving issues, conduct root cause analysis, and maintain comprehensive documentation in line with established standards, • Creating and deploying robust RPA solutions and VBA that align with best practices. Leveraging technical expertise to develop innovative, value-driven automation that reduces manual processing where a strong return on investment can be demonstrated, • Working closely with non-technical stakeholders to define and assess business requirements. Ensuring mutual understanding of deliverables and incorporate all value-adding elements into the final solution, • Defining, following, and continuously improving development lifecycles to ensure requirements are well-documented, agreed upon, and delivered effectively, • Managing automation projects from inception to completion. Influencing and engaging senior stakeholders to secure buy-in and ensure alignment with strategic goals and resource optimisation, • Identifying opportunities to enhance operational efficiency through data analysis and insight. Designing and implementing tools that proactively support business needs and drive performance improvements, • Providing technical support for key Management Information (MI) and work management systems. Safeguarding data integrity and develop enhancements that enable accurate, efficient information retrieval and reporting, • Offering expert guidance and mentorship in programming, testing, and automation practices. Fostering knowledge sharing and support the development of team capabilities Who we're looking for: • Knowledge of past and present products, and the purpose of the products. In addition ensure that knowledge is acquired and maintained on new product propositions., • Advanced knowledge of appropriate systems utilised across DC Savings (FPF etc), • Expert understanding of SQL (Transact & DB2) to build efficient, complex queries & Database Applications., • Extensive Expert knowledge of Robotic Process Automation and Visual Basic for Applications (VBA) so that Applications can be built and supported to best practice standards., • Ability to support defect/ issue analysis, data investigations and business acceptance testing, • Excellent numeric aptitude, having a strong analytical and problem solving ability, • Ability to recognise and define complex patterns and relationships in data held in MI systems and databases, • Ability to model and document detailed application requirements, translating technical specifications into programmed applications, • Ability to functionally test developed applications to ensure performance against technical specifications Whatever your role, we reward performance and behaviour with a package that looks after all the things that are important to you. Here are some of the benefits we offer: • The opportunity to participate in our annual, performance -related bonus plan and valuable share schemes, • Generous pension contribution, • Life assurance, • Healthcare Plan (permanent employees only), • At least 25 days holiday, plus public holidays, 26 days after 2 years’ service. There’s also the option to buy and sell holiday, • Competitive family leave, • Participate in our electric car scheme, which offers employees the option to hire a brand-new electric car through tax efficient salary sacrifice (permanent employees only), • There are the many discounts we offer – both for our own products and at a range of high street stores and online, • In 2023, some of our workspaces were redesigned. Our offices are great spaces to connect and collaborate and have your wellbeing at the heart At L&G, we believe it's possible to generate positive returns today while helping to build a better future for all. If you join us, you’ll be part of a welcoming, inclusive culture, with opportunities to collaborate with people of diverse backgrounds, views, and experiences. Guided by leaders with integrity who care about your future and wellbeing. Empowered through initiatives which support people to develop their careers and excel. We care passionately about outcomes rather than attendance and are therefore open to discussing all kinds of flexible working options including part-time, term-time and job shares. Although some roles have limited flexibility due to customer demand, we accommodate requests when we can. It doesn’t matter if you don’t meet every single criterion in this advert. Instead, think about what you excel at and what else you can bring in terms of strengths, potential and connection to our purpose.

Description Onera Health is a leader in transforming sleep medicine and remote monitoring. Our breakthrough diagnostic solutions and services are poised to help millions of people struggling with sleep-related ailments, while also impacting other medical fields by monitoring a variety of chronic conditions, ultimately improving the health and quality of life for patients around the world. The company’s innovative solutions provide comprehensive sleep test data to physicians in a variety of clinical and non-clinical environments to optimise patient care and reduce healthcare costs. Onera’s FDA-cleared and CE-marked home polysomnography (hPSG) platform delivers lab-quality diagnostics in the home through a fully integrated “PSG-as-a-Service” model. The UK is a priority market in Onera’s European expansion. In the UK, Onera goes to market through a clinical service provider partner rather than selling direct. The partner brings established NHS relationships and a top-down route into hospitals at executive level; Onera’s Clinical Sales Specialist works alongside them in the field — managing that partnership day to day and building demand from the bottom up at the clinical and departmental level, where sleep diagnostics credibility matters most. This is deliberately not a traditional, quota-closing field sales role. The close is driven through the partner’s executive-level motion. Your job is to create clinical pull — winning the confidence of sleep and respiratory teams, demonstrating the platform, and enabling the partner’s commercial engine — so that demand and adoption build underneath it. Success depends on clinical fluency and partner enablement far more than on personal deal-closing. Key Responsibilities Partner & Channel Management • Manage the relationship with Onera’s UK clinical service provider partner in the field, acting as the day-to-day point of contact and ensuring alignment between the partner’s commercial activity and Onera’s clinical priorities., • Enable and support the partner’s teams — equipping their representatives to position Onera accurately, and complementing their top-down, executive-level route into hospitals with clinical depth from the field., • Coordinate joint account planning with the partner, identifying target hospitals and sleep services and aligning on how each opportunity is progressed. Bottom-Up Clinical Demand Creation • Build demand from the clinical level up — winning the confidence of sleep physicians, respiratory teams, neurophysiology units, and sleep-laboratory staff so that clinical pull supports the partner’s top-down approach., • Engage credibly at peer level with consultants on sleep disorders — obstructive sleep apnoea, central sleep apnoea, narcolepsy, RLS/PLMD, and parasomnias — and on the wider diagnostic pathway (respiratory polygraphy, HSAT, CPAP titration, actigraphy, MSLT/MWT)., • Demonstrate and train clinical staff on the Onera platform unaided, drawing on hands-on familiarity with full diagnostic polysomnography — multi-channel attended studies including EEG, EOG, EMG, ECG, airflow, respiratory effort, SpO₂, and body position — and an understanding of manual sleep staging and event scoring to AASM guidelines, not just auto-scoring., • Build visibility with UK sleep-medicine KOLs and engage with national bodies such as the British Sleep Society and the ARTP. Territory Coverage & Field Execution • Cover the United Kingdom as Onera’s sole field-based representative, prioritising across regions, qualifying hard, and concentrating effort where clinical adoption can build rather than spreading too thin., • Maintain disciplined CRM hygiene and pipeline visibility, self-managing a national field role and giving Onera and the partner a clear, current picture of clinical engagement and opportunity., • Act as the clinical and commercial point of contact in the field, troubleshooting product-related questions and escalating to the appropriate internal stakeholders where needed. Market Intelligence & Collaboration • Track market trends, competitor activity, and customer feedback to inform product positioning and the UK partner strategy., • Collaborate with cross-functional teams across marketing, product, customer success, and clinical to align field activity with the wider commercial plan. Requirements • Clinical sleep background. Formal clinical background in sleep or respiratory diagnostics — e.g. registered sleep/respiratory physiologist, clinical scientist (Healthcare Science), or RPSGT — with the ability to demonstrate and train clinical staff unaided. Strongly preferred; exceptional candidates with deep, hands-on sleep/respiratory diagnostic exposure and genuine peer-level clinical credibility will also be considered., • Clinical credibility in the field. Able to hold peer-level conversations with consultants and clinical teams and to build confidence and adoption at the departmental level., • Commercial or clinical-specialist experience. A track record in a clinical sales specialist, clinical application, or field clinical role in medical devices or diagnostics — or a clinical background combined with clear commercial instinct., • Self-managing field discipline. Comfortable self-managing a national field role with sound CRM and pipeline discipline., • National coverage & travel. Willingness to travel extensively across the UK, with the autonomy to prioritise across regions., • Fluent English and excellent communication and interpersonal skills, with the ability to build trust-based relationships with clinical stakeholders and partner teams. Benefits • Remote / hybrid working model, with the technical equipment to set up your home office, • A competitive compensation package, • An open, collaborative company culture grounded in shared mission and team engagement, • The opportunity to join a scale-up at a defining commercial moment in sleep diagnostics

Location: Ecos Hub, Ballymena. Contract Type : 12 month fixed term contract We’re looking for a QA Engineer to join our Technology team at PlotBox, a global leader in cemetery and crematory management software. Our mission is to help our customers better serve families through innovative technology that brings clarity, efficiency, and peace of mind to an essential industry. In this role, you’ll be key to ensuring our software is fit for purpose, reliable, and delivering the best possible experience to our users. You’ll work closely with developers, product managers, and project teams to conduct both manual and automated testing—helping us release innovative, high-quality solutions with confidence. What you will do : • Identify and raise incidents in a timely manner, • Liaise with internal teams including developers and product managers to identify system requirements and help to plan out our new features, • Provide QA support for existing customers by reviewing issues and ensuring timely resolution, • Provide QA support on new project implementations, • Review requirements, specifications and technical design documents to provide timely and meaningful feedback, • Create detailed, comprehensive and well-structured test plans and test cases, • Estimate, prioritise, plan and coordinate testing activities, • Identify, record, document thoroughly and track bugs, • Perform thorough regression testing when bugs are resolved, • Develop and apply testing processes for new and existing products to meet client needs, • Liaise with internal teams (e.g. developers and product managers) to identify system requirements, • Monitor debugging process results, • Investigate the causes of non-conforming software and train users to implement solutions, • Track quality assurance metrics, like defect densities and open defect counts, • Stay up-to-date with new testing tools and test strategies, • Be educated to degree level in Software Engineering, Computer Science or similar subject OR equivalent experience, • Have 2 years experience in a software testing or quality assurance role, • Have a strong working knowledge of software methodologies, tools and processes, • Have experience in writing clear, concise and comprehensive test cases, • Have experience of working in an agile/scrum environment Why should you join PlotBox ? • We have a clear mission - and a sense of pride in doing what we do - to ultimately lessen people’s pain at the most difficult time of their lives; this means a lot to our team, • We are a global company with over 120 colleagues based across the UK, Australia and North America. You’ll undoubtedly broaden your understanding and appreciation of global operations, • We have a passion for tech and innovation, actively exploiting new and cutting-edge tools and technologies to enhance our product and skillset, • We are proud that, since 2020, we have received our Great Place to Work® Certification™ - our staff have told us loud and clear that they love working for PlotBox, • We have also been recognised as one of the UK’s Best Workplaces for Development™ 2024 - we invest in employee growth; we nurture every career., • We are a truly diverse and inclusive workplace; we are proud to boast 43% femalé representation - which is almost double the average within the tech industry and helped put us on the UK’s Best Workplaces for Women listing in 2023, • Our focus on wellbeing and a supportive culture has seen us ranked on the UK’s Best Workplaces for Wellbeing list (2023 and 2024), • One of our core values is trust; you are trusted to do your job without someone micro-managing - we expect people to give their best efforts in return Life at PlotBox - we appreciate that we may not be the right workplace for everyone, so below we have laid out what life at Plotbox is really like so you can decide if a career at PlotBox is for you ! • We are a growing / scaling company - as such we don't always have everything neatly mapped out so you have to be comfortable with ambiguity sometimes, • A 40 hour working week and core working hours. We ask everyone to be at work during our core hours from 10-4pm but outside of that we have flexible start and finish times so you can balance your work hours around life’s commitments., • We believe in continuous improvement - so that can mean change is a pretty constant thing for us - we need our people to embrace change as opposed to resisting it, • We believe feedback is crucial to development so we will create a safe environment where you can take onboard feedback and use it to improve - but we can't force you to take the feedback on board; that's your choice, • We will support and nurture you - but we need you to show initiative, be able to tackle problems, roll with the challenges and get stuff done, • There is no room for ego round here - everyone is here because they bring something to the table - all voices are heard and respected And in case you still can’t decide, here are MORE benefits to joining PlotBox ! • We support our employees’ health and wellbeing with regular wellbeing initiatives and health insurance, • Our life cover policy ensures your loved ones are looked after should the worst happen *, • Our flexible benefits suite allows you to flex-up (or down) on on benefits depending on what is most useful to you and your family at the time, • We regularly undertake reviews of our benefits package to ensure we are offering the best package for our staff, • Career mobility and progression which is based on merit as opposed to ‘time-served’ as well as the opportunity to travel to our global sites and visit customers when they need us on the ground., • Active social and charity committee - whether you work from our office or remotely we ensure lots of accessible activities allowing everyone to come together such as quizzes and our book club. ., • Our staff referral scheme* could see you bag a nice fee if you refer a friend who joins our team, • not applicable to Fixed term roles PlotBox is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We welcome applications from all qualified candidates regardless of race, religion, sex, sexual orientation, gender identity, national origin, disability, or any other characteristic that makes you who you are.. All employment decisions are based on qualifications, merit, and business needs. If you require any reasonable adjustment or wish to speak to a member of our Talent team about tailoring the recruitment process to your needs please email careers@plotblox.io stating the role you are applying for.

A fast-growing national gaming machine provider has created a new opportunity for experienced gaming machine field service engineer to join their team. They are looking for someone based in or around Nottingham region. The position offers a comparative salary up to £35k with additional bonus of up to £3K p/a with door to door pay. You'll have a chance to work with most recognisable pub chains and hospitality venues carrying out servicing, repair and installations of gambling machines, pool tables and juke boxes. The position has been reacted due to recent winnings of big contracts. You will receive training, ongoing upskilling programme and career development. Responsibility of gaming machine field service engineer • Install and service gaming equipment across pubs and hospitality venues, • Act as the first point of contact for customers, delivering friendly and efficient support, • Maintain strong customer relationships to ensure the company is professionally represented, • Carry out manual handling tasks safely, following all Health & Safety requirements, • Travel daily to customer sites using a company vehicle Requirements of gaming machine field service engineer • Experience servicing gaming machines such as gambling...

Assembly Fitter Salary - Upto £32k DOE Permanent Mornings - Monday to Thursday,06.00am-14.00pm Friday (phone number removed)pm Afters - Monday to Thursday, 14.00pm-22.00pm , Friday, 13.00pm-20.00pm Working alone or in pairs under supervision to produce high quality aircraft wing structures for civil aviation. Using jigs and fixtures you will work progressively to assemble components to drawing requirements and specifications through to completion before delivery to the customer. Primary Responsibilities: Always operate in a safe manner abiding by the company's Rules of Safety and Quality Produce work to an exact standard under supervision (training will be provided on job specifics to the successful candidate) Working to specifications, S.O.P's, and visual aids Manual drilling and bench work using jigs and fixtures, assembly of components using specialised fasteners, sealants and paints Keep all production records up to date for jobs to ensure traceability Maintain a high standard of housekeeping in own work area and the section Ability to work a rotating two shift system Knowledge and Skills: Deburring, manual drilling using jigs and fixtures, and a keen eye for detail Experience in light assembly work using sealants and torque tightening fasteners while following simple S.O.P's would be desirable Ability to read and understand engineering d...

Help us use technology to make a big green dent in the universe! It’s a really exciting time in energy. Help us make a real impact on shaping a better, more sustainable future. We are very excited to be building a small and efficient Cyber and Information Security team at Octopus Energy Group. We are looking for ambitious, knowledgeable, and experienced InfoSec Analysts to join our team, to grow with the rest of the company, and ensure we continue to do so in a secure and safe way. You will be a key partner in defining what Security is at Octopus Energy Group. We will be shaping this team to provide a world class support service to our employees, building our way out of problems and undertaking transformational organisational change. You’ll be primarily supporting our Octopus Energy Group services, while working with various Group Subsidiaries to expand our capabilities and develop creative solutions to business challenges and opportunities to continually improve our services. Specifically, we're looking for InfoSec Analysts with at least 2 years of relevant experience to help us improve security across the Octopus Energy Group. If you’re passionate about Information Security and driving a positive security culture, we encourage you to apply! • Maintaining and improving our Information Security Management System (ISMS) and associated policies, guidelines, standards and procedures, • Contributing to the development of our security assurance function, • Performing security risk assessments and maturity assessments for OE Group, • Promoting a positive security culture and raising awareness through training and other initiatives, • Supporting the implementation of security processes and requirements, • Providing security advice and guidance to the wider technical team, • Liaising with stakeholders in relation to security issues and providing remediation/improvement recommendations, • Supporting Octopus Energy Group’s audit & compliance automation programs, enabling easy demonstration of compliance as we scale, • Working with the wider Security team to set the security strategy for Octopus Energy Group and its subsidiaries, • Keeping up to date with the latest security trends, and evaluating their potential impact on our systems, assisting the business to understand and manage associated risks This is a varied role in a growing team. You’ll have the opportunity to get involved in other security-related projects and initiatives as needed. We encourage you to take on new challenges that align with your skills and interests, and to collaborate with other teams to drive improvements in security across our entire organisation • A passion for security, a drive to make things better by harnessing technology, • Experience in, or knowledge of, automating GRC and other security processes to reduce manual work, • Strong analytical and problem-solving skills, with the ability to identify and mitigate security risks, • A good understanding of information security principles and the ability to communicate this to people who aren’t subject matter experts, • Experience producing or supporting the delivery of security awareness programs in different business environments, • Knowledge of industry and regulatory security standards, such as ISO 27001, SOC2, and GDPR A good candidate will have experience in at least some of the areas mentioned, we’re not expecting any candidate to be an expert in all areas! • Security certifications (any of the famous abbreviations), • Security qualifications (e.g. apprenticeships or degrees), • Experience working in organisations that maintain ISO 27001 and/or SOC 1 and SOC 2 type II certifications, • A wider understanding of technology, especially AWS (or other CSPs), • A background in a technical role or technical knowledge through education or training, • 💰 Wondering what the salary for this role is? Just ask us! On a call with one of our recruiters it's something we always cover as we genuinely want to match your experience with the correct salary. The reason why we don't advertise is because we honestly have a degree of flexibility and would never want salary to be a reason why someone doesn't apply to Octopus - what's more important to us is finding the right octofit!, • 🎉 Octopus Energy Group is a unique culture. An organisation where people learn, decide, and build quicker. Where people work with autonomy, alongside a wide range of amazing co-owners, on projects that break new ground. We want your hard work to be rewarded with perks you actually care about! We were recently named the , and we ranked in the . Our Group CEO, Greg has recorded and how we empower our people. We’ve also been placed in the, • 🎁 Visit our UK perks hub - _Our process usually takes up to 4 weeks, but we’ll always do our best to flex around what works for you. Along the way, you’ll chat with our recruitment team and your Recruiter will help you throughout different stages. Got any burning questions before then? Drop us a message at hiring@octoenergy.com and we’d love to help! If this sounds like you then we'd love to hear from you. 🚀 Are you ready for a career with us? We want to ensure you have all the tools and environment you need to unleash your potential. Need any specific accommodations? Whether you require specific accommodations or have a unique preference, let us know, and we'll do what we can to customise your interview process for comfort and maximum magic! Studies have shown that some groups of people, like women, are less likely to apply to a role unless they meet 100% of the job requirements. Whoever you are, if you like one of our jobs, we encourage you to apply as you might just be the candidate we hire. Across Octopus, we're looking for genuinely decent people who are honest and empathetic. Our people are our strongest asset and the unique skills and perspectives people bring to the team are the driving force of our success. As an equal opportunity employer, we do not discriminate on the basis of any protected attribute. Our commitment is to provide equal opportunities, an inclusive work environment, and fairness for everyone.

Legal & General (L&G) is a leading UK financial services group and major global investor. We’ve been safeguarding people’s financial futures since 1836, and strive to build a better society, while improving the lives of our customers and creating value for shareholders. We are one of the world’s largest asset managers and provide powerful asset origination capabilities. Together, these underpin our retirement and protection solutions: we are an international player in pension risk transfer, in UK and US life insurance, and in UK workplace pensions and retirement income. L&G Retail supports the savings, protection and retirement needs of around 14 million people, through our portfolio of retail and workplace businesses. Our Retail division helps people enjoy a more colourful retirement, both directly and through their employers, including Lifetime Mortgages, Retirement Interest Only Mortgages and financial advice on our range of lending products. We are the UK’s number one individual life insurer, and also provide Group Protection products for employers – all helping people to plan for the unexpected. We support home buying through our Mortgage Club – the UK’s largest – and our award-winning Surveying Services team. And our fintech team finds and supports socially useful start-ups and scale-ups working in the workplace, home, insurance and wealth areas. Joining us means helping create brighter financial futures for all our customers. We are seeking a skilled RPA Developer to join our dynamic team. In this role, you will be responsible for the design, development, maintenance, and support of Robotic Process Automations (RPA) using Blue Prism, as well as solutions built with Visual Basic for Applications (VBA), across our DC Operations. The ideal candidate will bring a creative and pragmatic approach to problem-solving, identifying opportunities to streamline manual processes through automation. You will play a key role in driving operational efficiency while ensuring robust change control practices are followed and measurable benefits are consistently tracked. What you'll be doing: • Ensuring the ongoing performance and reliability of RPA solutions and VBA applications across DC Operations. Promptly resolving issues, conduct root cause analysis, and maintain comprehensive documentation in line with established standards, • Creating and deploying robust RPA solutions and VBA that align with best practices. Leveraging technical expertise to develop innovative, value-driven automation that reduces manual processing where a strong return on investment can be demonstrated, • Working closely with non-technical stakeholders to define and assess business requirements. Ensuring mutual understanding of deliverables and incorporate all value-adding elements into the final solution, • Defining, following, and continuously improving development lifecycles to ensure requirements are well-documented, agreed upon, and delivered effectively, • Managing automation projects from inception to completion. Influencing and engaging senior stakeholders to secure buy-in and ensure alignment with strategic goals and resource optimisation, • Identifying opportunities to enhance operational efficiency through data analysis and insight. Designing and implementing tools that proactively support business needs and drive performance improvements, • Providing technical support for key Management Information (MI) and work management systems. Safeguarding data integrity and develop enhancements that enable accurate, efficient information retrieval and reporting, • Offering expert guidance and mentorship in programming, testing, and automation practices. Fostering knowledge sharing and support the development of team capabilities Who we're looking for: • Knowledge of past and present products, and the purpose of the products. In addition ensure that knowledge is acquired and maintained on new product propositions., • Advanced knowledge of appropriate systems utilised across DC Savings (FPF etc), • Expert understanding of SQL (Transact & DB2) to build efficient, complex queries & Database Applications., • Extensive Expert knowledge of Robotic Process Automation and Visual Basic for Applications (VBA) so that Applications can be built and supported to best practice standards., • Ability to support defect/ issue analysis, data investigations and business acceptance testing, • Excellent numeric aptitude, having a strong analytical and problem solving ability, • Ability to recognise and define complex patterns and relationships in data held in MI systems and databases, • Ability to model and document detailed application requirements, translating technical specifications into programmed applications, • Ability to functionally test developed applications to ensure performance against technical specifications Whatever your role, we reward performance and behaviour with a package that looks after all the things that are important to you. Here are some of the benefits we offer: • The opportunity to participate in our annual, performance -related bonus plan and valuable share schemes, • Generous pension contribution, • Life assurance, • Healthcare Plan (permanent employees only), • At least 25 days holiday, plus public holidays, 26 days after 2 years’ service. There’s also the option to buy and sell holiday, • Competitive family leave, • Participate in our electric car scheme, which offers employees the option to hire a brand-new electric car through tax efficient salary sacrifice (permanent employees only), • There are the many discounts we offer – both for our own products and at a range of high street stores and online, • In 2023, some of our workspaces were redesigned. Our offices are great spaces to connect and collaborate and have your wellbeing at the heart At L&G, we believe it's possible to generate positive returns today while helping to build a better future for all. If you join us, you’ll be part of a welcoming, inclusive culture, with opportunities to collaborate with people of diverse backgrounds, views, and experiences. Guided by leaders with integrity who care about your future and wellbeing. Empowered through initiatives which support people to develop their careers and excel. We care passionately about outcomes rather than attendance and are therefore open to discussing all kinds of flexible working options including part-time, term-time and job shares. Although some roles have limited flexibility due to customer demand, we accommodate requests when we can. It doesn’t matter if you don’t meet every single criterion in this advert. Instead, think about what you excel at and what else you can bring in terms of strengths, potential and connection to our purpose.

ATC is a European logistics, white glove, and technical services specialist for data centres. Our focus is on anticipating the critical needs of our clients and delivering industry-leading standards for safety, security and reliability. Since being established in 1979, we have continued to lead our dedicated teams across Europe to build strong relationships with our clients. Our mission is to deliver and install Europe’s data centres with precision and care. We achieve this by focusing on our team and our services: • Our Team – Powered by people to keep data centres moving safely and securely. We recognise that our greatest strength is our staff, which is why we promote a culture of personal development and professional training, both internally and from leading industry bodies. • Our Services – We provide a range of specialised services tailored to the individual needs and demands of each client, their equipment, and their data centre infrastructure. From managing specialised computer transport, and IT relocation services, to logistics and planning, and data centre commissioning and decommissioning; we adapt our 40+ years of expertise to every situation. ATC operates in a dynamic global market where clients demand a service that is right first time, every time; we are recruiting motivated and driven people to work in a company that is Driving Forward. The position of Driver will report directly to the Transport Manager and is created to deliver the following high-level objectives: • To collect and deliver products in line with agreed schedules., • To reporting to Operations Manager throughout the day., • To complete all Digital and Manual documentation in line with company and client procedures., • To ensure all documentation is kept up to date and shared as appropriately (i.e., amend on the spot if job order changed)., • To ensure levels of customer service are maintained at all times., • To act in a professional manner with clients and colleagues at all times.., • To adhere to all regulations regarding the performance of duties including but limited to staff uniform, performance standards., • To follow route and time schedules as defined, and to notify any changes immediately., • To load, unload, prepare, inspect and operate the delivery vehicle and to notify any issues immediately., • To deal with and manage multiple customer's and supplier's needs on both domestic and international runs., • To ensure all documentation for warehouse/haulage/distribution/shipping is accurate., • To perform and implement general administration on a daily basis., • To comply with all tachograph requirements as set out and amended from time to time., • Any other duties that may be assigned from time -to-time in line with your skills and competencies. The remunerating package, including salary and benefits, is negotiable depending on experience. The package may include the following: • Competitive market salary., • Performance-based bonus., • Opportunities for continuing professional development will also be provided., • Company pension plan(varies by region, subject to local employment laws)., • Sports & social club.

Manual Turner Required! Our client is rapidly growing engineering company, specialising in machining and heat treatment. On behalf of our client, we are looking to recruit an experienced Manual Turner. The successful candidate will set up and operate manual lathes to produce high-quality precision components in accordance with engineering drawings, customer specifications, and company quality standards. Package: • 20 days holiday plus bank, • Contractual profit sharing scheme, • 40 hour working week with early finish on Fridays (6:30am - 3:30pm Monday to Thursday, 12:30pm finish Fridays), • Hourly rate £14.50 - £18.50 per hour (DOE) Manual Turner - Responsibilities: • Set up and operate manual centre lathes and/or other turning equipment safely and efficiently, • Machine components to tight tolerances from engineering drawings and technical specifications, • Carry out in-process inspection using verniers, micrometers, bore gauges, and other precision measuring equipment, • Ensure all work meets required quality standards and customer specifications, • Interpret engineering drawings, including GD&T where applicable, • Carry out routine machine maintenance and ensure equipment is kept in good working order, • Maintain a clean, safe, and organised working environment in line with 5S and HSE standards

Starting with retail and consumer packaged goods (CPG) organizations the company is helping enterprise teams eliminate manual processes improve operational efficiency and unlock measurable business outcomes. Lead enterprise transformation initiatives for retail and CPG customers. Experience within r

GEV Wind Power is seeking experienced Blade Repair Technicians to support internal blade inspections and composite repair projects on SGRE wind turbines at onshore wind farms throughout the United States. This role requires extensive travel and offers the opportunity to work on a variety of projects while maintaining the highest standards of safety, quality, and workmanship. Location: 100% travel throughout the USA Job Type: Contract Job Responsibilities: Travel 100% on a rotational basis to wind farms throughout the U.S. - cross country travel by air or truck Perform composite blade repair up-tower via platforms, rope access and/or occasionally on the ground Epoxy and Polyester resin wet layup Vacuum infusion Balsa and foam sandwich materials Structural repair Completing detailed Daily Progress Reporting Documents and QAQC reports Completing onsite stock checks Assisting site lead and project coordinator as applicable We are looking for strong, reliable technicians with the following skillset and training: 2+ years of Composite repair experience Platform and/or rope access experience Knowledge of fiberglass reinforcement and structural repair methods. Ability to safely and properly use powered hand tools. Good finger dexterity, including precise use of hand and power tools Understanding of repair specifications Ability to read and interpret complex technical drawings and processes. IT literate, including email, internet, and iPad usage. Ability to work well in a team, take guidance, and provide leadership when required. Flexibility to adapt to changes in scope and work assignments. Physically capable of meeting strenuous job requirements, including climbing ladders and scaffolding, bending, crawling, stooping, and lifting up to 75 pounds. Ability to wear a respirator and work safely with protective equipment Good vision (with corrective lenses if necessary) to perform detailed inspections, read instructions, and safely operate equipment. Valid driver’s license, good MVR report, and must be 21 years of age or older to drive a company vehicle. Must successfully pass a criminal background check and maintain a drug-free status. To be considered for this role, candidates will need the following certifications: GWO BST (Basic Safety Training) – fire awareness, working at heights, manual handling, first aid GWO ART (Advanced Rescue Training Hub/Nacelle) GWO Slinger Signaller or Siemens Rigging Safety GWO Blade Repair or Advanced Blade Repair from any of the approved providers: AmuSyd, Team 1, Blade Repair Academy or Green SGBTCF Blade Technician Profile Spot Paint certification OSHA 10 General Industry (preferred; assistance available to obtain certification) EHS Regional Compliance (preferred; assistance available to obtain certification) Rigging Safety SGRE Blade C or Blade D certification (preferred but not required) What are the perks of working with GEV Wind Power? Upskilling trusted GEV technicians via GEV Academy Bespoke reporting system (time saving with training provided) Streamlined communications for our technicians with regular Business and Project updates via GEV technician engagement platform We listen to our technicians needs and value their feedback (consistent technician feedback surveys) Ongoing work for our top talent A little bit about us: A Career Enabling You to Make a Global Impact! You will have heard about the term ‘energy transition’ and perhaps wondered what this means and even how you can get involved. We can see fundamental changes in our daily lives from the electrification of motor vehicles to reducing our dependency on fossil fuels through the increased use of renewable energy sources. At GEV Wind Power, we are a key part of this transition and proud to be helping in a small way to accelerate the change. Our role is critical in supporting power generation from wind energy, where we are the market leader for maintaining one of the key components, the rotor blades. If the blades become damaged or simply lose their structural integrity through erosion from wind and rain, their efficiency and ability to produce power reduces dramatically. Our job is to ensure the blades keep their profile and are optimum for producing electricity. Your application has been successfully submitted! _ We appreciate your interest in this position. Unfortunately, you have already applied for this job.

Remote or hybrid remote/London office About us: We’re a fast growing AI startup on a mission to help midmarket businesses transform how work gets done. We’ve built a factory for custom operations agents. The factory builds Virtual Agents: software workers with AI reasoning that complete complex workflows end-to-end, directly in customer tools. There’s no tech integration, process change or upfront cost. Onboarding is white-glove, takes a matter of days, and customers pay only for delivered value. This makes Virtual Agents the lowest risk way to automate complex manual work. And it makes Unitary the first company delivering Palantir-grade AI deployment with the unit economics of software - enabling us to reach the midmarket at scale. Today we’re focused on commercial insurance, marketplaces and primary healthcare. But the potential for Virtual Agents goes far beyond. We closed $15M Series A funding in 2024, and we’re backed by some leading names in AI (Plural and Creandum). We’re working with world-class clients such as Substack, Trustpilot, Depop, Sony Interactive Entertainment and many more. This is an exciting opportunity to join a well-funded startup at a crucial stage of growth, and to play a significant part in turning frontier AI technology into real world value. About the role: We’re seeking an experienced Senior Product Manager to shape Virtual Agents at a critical stage of its growth. Reporting to the VP Product, you will have ownership over a core part of the Virtual Agents product, from the core automation technology and customer experience to the onboarding and human-in-the-loop operations that support them. In addition to working with our AI teams on the core tech, you’ll collaborate with all parts of the business to build and scale Virtual Agents: the sales experience, onboarding journey and support operations are critical parts of the product. You will: • Set and own the direction of a meaningful part of the Virtual Agents product in line with our product strategy. Our products use cutting edge AI technology to automate critical, high-volume and complex processes, so you’ll need to get into the technical details and bring precision and analytical rigour to product decisions, • Own the entire product lifecycle, spanning both the core technology and the commercial/operational elements required to market, sell and deliver it at scale, • Develop a deep understanding of our customers, domains and competitive landscape across multiple verticals, • Collaborate across the business to execute successfully on your plans - ensuring products are built right, sales and marketing teams are enabled, and delivery teams can scale smoothly, • Work closely with the VP Product to help define and refine the overall product strategy About you: • 4+ years’ experience in product management, working on complex B2B products, ideally in AI or automation, and ideally within a startup/scale-up or early-stage context, • Exceptional analytical skills to break down complex challenges in systematic ways, getting to the core of any problem you’re given, • Experience contributing to strategy in greenfield or rapidly evolving environments, • Proven track record as an executor: great at working with engineers, designers, operators and marketers to build impactful products and drive key metrics, while ensuring nothing slips through the cracks, • A precise and confident communicator, able to set clear direction internally and comfortable representing us with senior stakeholders at customer organisations, • Self-motivated, flexible, and low-ego. You thrive in fast-paced, rapidly evolving environments, and are happy to roll up your sleeves across the business - whether that’s supporting customer delivery or creating sales materials, • Competitive salary, commission and equity package, • Lots of autonomy and opportunities for growth, • Flexible hours and location, with a monthly coworking budget or option to use our London office, • Occupational pension (location dependent)location d, • Generous paid parental leave, • Generous paid sick leave, • Annual budget for your professional development and growth, • Annual budget for your individual health and wellness, • Quarterly team offsites to London and other exciting destinations in Europe

Flosum is a Salesforce-native DevOps and data protection platform serving enterprise Salesforce teams across the Fortune 5000. We are in wartime. Pipeline generation, retention, and product velocity are our three highest-priority problems, and AI is the lever that accelerates all three. We are hiring our first AI Go-to-Market Engineer to architect, deploy, train, and continuously optimize AI agents and automation across the entire revenue engine — from first touch to closed-won to expansion. This is not a "prompt engineering" role. This is a builder role. You will sit at the intersection of revenue operations, sales, marketing, and customer success, and your job is to make every human on the GTM team dramatically more productive by deploying AI systems that generate pipeline, accelerate deals, and reduce churn. You report directly to the CEO. WHAT THIS ROLE MUST DO TO CHANGE FLOSUM'S TRAJECTORY • Deploy and personally train at least one AI SDR agent within the first 30 days — focused on either inbound qualification from Qualified/Marketo or outbound prospecting via Outreach — and run weekly refinement cycles until it outperforms the bottom half of the human BDR bench., • Build an AI-powered inbound qualification system that captures, scores, and routes every website visitor and form fill in real time so no lead waits, no lead gets lost, and AEs only touch prospects that are ready to buy., • Increase revenue-generating time per AE from the current ~25% to 50%+ by automating CRM hygiene, call summarization (via Gong), follow-up sequencing, proposal drafting, and pipeline updates — eliminating every minute of admin work that doesn't directly produce revenue., • Architect the AI layer across Flosum's GTM stack (Salesforce, Marketo, Outreach, Qualified, Gong) so that data flows between systems without manual intervention, every customer touchpoint is captured, and AI agents share learnings in a virtuous loop with Salesforce as the hub., • Build and maintain an AI-driven competitive intelligence engine that monitors our competition, pricing changes, and product launches — and feeds structured insights to sales and product weekly., • Create hyper-personalized outbound campaigns at 10x current volume without proportional headcount increase — using AI to research accounts, generate personalized messaging based on ICP signals (Salesforce team size, current DevOps tooling, compliance requirements like DORA), and sequence multi-channel touches across email, LinkedIn, and phone., • Instrument a closed-loop data feedback system between BDR activity, pipeline outcomes, and AI agent performance so that ICP targeting, messaging, and channel mix improve every week based on actual conversion data — not guesswork., • Deploy AI-assisted customer health scoring and churn prediction models that flag at-risk accounts before renewal, feeding Terry's CS team with actionable intervention triggers tied to usage data, support ticket patterns, and engagement signals., • Prototype AI-powered product-led growth touchpoints — including conversational qualification on the website, self-serve onboarding assistance, and automated nurture for trial users — supporting the PLG motion as it matures., • Evaluate, select, and deploy no more than two AI vendors per use case using a structured bakeoff methodology: reference checks via email, FDE conversations before contract, and 30-day dedicated training commitments — no lazy agency deployments. Hands-on experience deploying and training AI SDR/BDR agents in a real B2B sales environment — not evaluating, not advising, actually deploying and iterating weekly for at least 90 days. Deep working knowledge of the modern B2B GTM stack — specifically Salesforce (as CRM and data hub), Marketo or equivalent MAP, Outreach or Salesloft, Gong or Chorus, and real-time chat/qualification tools like Qualified or Drift. Ability to write and maintain production integrations — Python, JavaScript, or equivalent — connecting AI agents to CRM, MAP, and sequencing tools via APIs. You don't need to be a software engineer, but you need to ship working code, not just configure no-code tools. Understanding of pipeline math and unit economics: you should be able to work backward from a revenue target to SQLs required, conversion rates by stage, and the specific AI interventions that move each number. If someone says "we need 67 SQLs per quarter at 20% win rate and $75K ASD," you should immediately know where AI can compress that funnel. Experience with AI agent orchestration — managing multiple AI agents working different segments or functions simultaneously, resolving conflicts, preventing duplicate outreach, and maintaining data quality in the hub (Salesforce). Demonstrated ability to build prompt libraries, training datasets, and refinement workflows for AI agents — treating agent training as a discipline, not a one-time setup. Comfort operating in a company doing ~$4M ARR with a small, high-intensity team. You will not have a large support staff. You will do the work yourself and scale through automation, not delegation. Strong opinions on when AI should replace human effort versus augment it — and the judgment to know that bad AI automation destroys deals faster than no automation at all. Familiarity with the Salesforce ecosystem — understanding of DevOps, CI/CD, data protection, and compliance workflows is a major advantage. You don't need to be a Salesforce admin, but you need to understand what our buyers care about and why Why Flosum • Category-defining opportunity: You will shape the future of how enterprises build on Salesforce. This is not incremental; it is transformational., • Direct CEO partnership: You will work shoulder-to-shoulder with a founder who is deeply technical, product-obsessed, and committed to building the best platform in the Salesforce ecosystem., • Fortune 100 customer base: Your product decisions will directly impact how the world's largest and most complex organizations operate., • AI inflection point: Agentforce and autonomous agents are rewriting the rules. Flosum is the first native platform to integrate these capabilities. You will define what comes next., • Missionary culture: We hire people who want to make a dent, not pad a resume. If you are looking for a place where your work matters and your ideas are heard, this is it. Compensation & Benefits • Competitive base salary + performance bonus, • Direct access to Salesforce ecosystem events, conferences (Dreamforce, TrailblazerDX), and customer engagement

Legal & General (L&G) is a leading UK financial services group and major global investor. We’ve been safeguarding people’s financial futures since 1836, and strive to build a better society, while improving the lives of our customers and creating value for shareholders. We are one of the world’s largest asset managers and provide powerful asset origination capabilities. Together, these underpin our retirement and protection solutions: we are an international player in pension risk transfer, in UK and US life insurance, and in UK workplace pensions and retirement income. L&G Institutional Retirement looks after around 700,000 institutional customers who have their retirement benefits secured with us. Operating continuously in the UK market from our entrance in 1987, we are the UK’s longest-running insurer. Our Institutional Retirement division provides pension risk transfer (PRT) solutions for UK and US defined benefit (DB) schemes, and reinsurance solutions from our global hub in Bermuda. We work with companies, DB pension schemes and their advisors to help them secure and protect scheme members’ retirement benefits. Joining us means you’ll support customers’ financial security in retirement; help companies to settle their pension liabilities and focus on growing their businesses; and enable investment for the long term to back our pension promises. Recruiter: Clarice Wale _ We’re recruiting for a Technical Quality Analyst to join us. We’re offering a base salary between £52,000 - £58,000 dependant on experience. As a Technical Quality Analyst, you will work within the Quality Framework to: • Review and assess the most complex manual calculations and documents in PRT Client Services., • Use your knowledge of Defined Benefit Pensions to identify root causes of issues and help the business implement effective solutions., • Support technical and customer queries to ensure excellent customer outcomes. What you'll be doing: • Conduct quality assurance assessments on complex manual pension calculations and documentation, • Use your Defined Benefit pensions expertise to identify root causes of issues and support process improvements, • Collaborate with teams to resolve technical and customer queries, ensuring excellent service delivery, • Provide coaching and feedback to team members and managers based on QA findings, • Support the development of QA strategies and contribute to continuous improvement initiatives, • Mentor colleagues and help build technical knowledge across the team Who we're looking for: • Strong knowledge of Defined Benefit pension schemes and related legislation, • Experience in pension calculations, administration, and quality assurance, • Excellent analytical, communication, and coaching skills, • Ability to manage priorities and work collaboratively across teams, • Pension qualifications (e.g., PMI) or equivalent experience Whatever your role, we reward performance and behaviour with a package that looks after all the things that are important to you. Here are some of the benefits we offer: • The opportunity to participate in our annual, performance -related bonus plan and valuable share schemes, • Generous pension contribution, • Life assurance, • Healthcare Plan (permanent employees only), • At least 27 days holiday, plus public holidays. There’s also the option to buy and sell holiday, • Competitive family leave, • Participate in our electric car scheme, which offers employees the option to hire a brand-new electric car through tax efficient salary sacrifice (permanent employees only), • There are the many discounts we offer – both for our own products and at a range of high street stores and online, • In 2023, some of our workspaces were redesigned. Our offices are great spaces to connect and collaborate and have your wellbeing at the heart At L&G, we believe it's possible to generate positive returns today while helping to build a better future for all. If you join us, you’ll be part of a welcoming, inclusive culture, with opportunities to collaborate with people of diverse backgrounds, views, and experiences. Guided by leaders with integrity who care about your future and wellbeing. Empowered through initiatives which support people to develop their careers and excel. We care passionately about outcomes rather than attendance and are therefore open to discussing all kinds of flexible working options including part-time, term-time and job shares. Although some roles have limited flexibility due to customer demand, we accommodate requests when we can. It doesn’t matter if you don’t meet every single criterion in this advert. Instead, think about what you excel at and what else you can bring in terms of strengths, potential and connection to our purpose.

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 5x Development and Production Test Engineer - Electronic/Electrical subcontractors on an initial 12 month contract. Hybrid working from home is available, with a minimum of 3 Days onsite. • Looking for somebody with substantial test engineering experience., • Diagnosis of test failures, • Testing experience down to component level, • The department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills. Hourly Rate: £37.00ph (Umbrella). (An accommodation allowance of £400 per week is available for those who live outside a 30 mile radius of the Bolton site) Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Development and Production Test Engineer – Electronic / Electrical Job Description: As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Responsibilities: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: • Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment., • Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level., • Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information., • Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures., • Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Skillset/experience required: • Essential:, • Minimum HNC level of Engineering qualifications or equivalent., • Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level., • Awareness of electrical/electronic sub-system and system design, integration and test principles., • Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports., • Ability to plan and organise one's work according to assigned priorities., • Advantageous:, • Knowledge of RF and Microwave technology at the subsystem level., • Experience in operating manual and automated test equipment in an Electronics Manufacturing environment.

This is a job that Jill, our AI Recruiter, is recruiting for on behalf of one of our customers. She will pick the best candidates from Jack's network The next step is to _. Job Title: Software Engineer Salary: £50-70K + Equity Company Description: Crumb - Legal AI and Marketplace Job Description: Join Crumb as our first dedicated engineering hire to build agentic AI tools and a marketplace for in-house legal teams. You will own the product end-to-end, from frontend to infrastructure, working directly with the technical lead. This is a founding-level role where you will ship features that automate complex legal workflows and eliminate manual processes. Location: London, UK Why this role is remarkable: Founding engineer position with total ownership over the product roadmap, technical architecture, and engineering culture from day one. Transition from a successful fractional General Counsel firm into a high-growth tech platform with a front-row seat to industry pain points. High-impact work building sophisticated agentic AI tools that solve real-world efficiency problems for legal teams at venture-backed companies. What you will do: Design and build end-to-end features using React, Node.js, and TypeScript, moving from user problem to production code without PM intervention. Develop and maintain complex multi-step workflows, background jobs, and webhook-driven integrations to automate manual legal tasks. Architect and secure our AWS cloud environment, ensuring the platform is scalable and resilient as we expand our user base. The ideal candidate: Proven experience shipping production software with React and Node.js/TypeScript, with a strong emphasis on owning systems end-to-end. Hands-on expertise with AWS infrastructure, production webhooks, and managing asynchronous background jobs or scheduled tasks. A true builder mentality with strong product intuition, comfortable using AI coding tools to accelerate development in an ambiguous, fast-paced environment. Who are Jack & Jill? Ok, I'll go first. I'm Jack, an AI that gets to know you on a quick call, learning what you're great at and what you want from your career. Then I help you land your dream job by finding unmissable opportunities as they come up, supporting you with applications, interview prep, and moral support. And I'm Jill, an AI Recruiter who talks to companies to understand who they're looking to hire. Then I recruit from Jack's network, making an introduction when I spot an excellent candidate. Next steps Step 1. Visit _. Step 2. Click 'Talk to Jack'. Step 3. Talk to Jack so he can understand your experience and ambitions. Step 4. Jack will make sure Jill (the AI agent working for the company) considers you for this role. Step 5. If Jill thinks you're a great fit and her client wants to meet you, they will make the introduction. Step 6. If not, Jack will find you excellent alternatives. All for free. We never post fake jobs This isn't a trick. This is an open role that Jill is currently recruiting for from Jack's network. Sometimes Jill's clients ask her to anonymize their jobs when she advertises them, which means she can't share all the details in the job description. We appreciate this can make them look a bit suspect, but there isn't much we can do about it. Give Jack a spin! You could land this role. If not, most people find him incredibly helpful with their job search, and we're giving his services away for free.

🚀 We’re on a mission to make money work for everyone. We’re waving goodbye to the complicated and confusing ways of traditional banking. After starting as a prepaid card, our product offering has grown a lot in the last 10 years in the UK. As well as and bank accounts, we offer , , a and in the UK, with more exciting things to come beyond. Our UK customers can also , and _ with us. With our hot coral cards and get-paid-early feature, combined with financial education on social media and our award winning customer service, we have a long history of creating magical moments for our customers! We’re not about selling products - we want to solve problems and change lives through Monzo ❤️ _ ✨ London/Cardiff/UK Remote | 💰£56,000 - £70,000 dependent on experience + | ✨ ⭐ Our Finance team We're looking for a highly proactive, enthusiastic and commercially-minded Treasury product control analyst to work within our Financial team, and help us build a world-class finance function. This role would be well suited to a qualified, or soon to qualify, accountant with a background in Treasury financial reporting and control. We have some really exciting challenges coming up like systems implementation, expanding into the European Union, continuing to grow our customer base, keep growing our lending business and adding to our marketplace which all leads to exciting Treasury activity including investment activity and derivative execution. You’ll work on scaling Monzo in a controlled way, while helping us optimise our financial control processes with the help of technology. You’ll join the Finance team and report to our Treasury Product Controller. 🔑 You’ll play a key role by... • Working very closely with our Product Controller and Treasury team as we continue to build our product control capabilities in Finance, helping support Treasury with all market execution activity., • Take ownership of the daily control processes around Treasury products, including trade confirmations, trade market matching, collateral management, daily profit and loss reporting, valuation controls around Treasury financial instrument pricing and helping to build out best-practice, scalable controls., • Help manage a tight process with the rest of our Finance team to ensure a swift month-end close process for Treasury reporting, including derivative and hedge accounting processes., • Understand the Treasury business and their products to write insightful management commentary., • Work with our engineers and data teams to automate the production elements of this role, allowing you to focus on the parts of the role where your knowledge and skills provide the most value., • Assist with the implementation of our new accounting system, from a Treasury perspective, to make sure we are taking advantage of all its features to minimise manual elements of reporting., • Learn SQL skills to run reports and propose solutions that make our processes efficient and scalable., • Maintain existing and develop new controls that protect our financial data and our balance sheet substantiation process., • Support our year end process working with external auditors and our Financial Reporting squad., • Review new Treasury products, assessing the accounting and implementing them in our banking platform and accounting system; including configuration of account mapping in our Treasury Management system., • Work with 2LoD and 3LoD to develop a robust control environment., • Prepare monthly management and ad-hoc reports, offering meaningful analysis of movements., • Resolve miscellaneous inquiries and supporting the overall Finance team wherever needed - from forecasting and valuations, to bank transfers and new system implementations. 🤩 We’d love to hear from you if… • You’re a qualified, or soon to qualify, accountant and have had 1-2 years’ experience in product control (bonus points for Treasury experience)., • You have a great eye for detail., • You’re fascinated by the banking and regulatory landscape, and have a good understanding of key financial controls., • You’re a self-starter and enjoy tackling what needs doing, whether it’s making a bank transfer or pulling together reports for investors., • You’re comfortable translating complex information into simple words for people with diverse backgrounds., • You’re interested in using data (SQL skills would be a bonus)., • You thrive in a dynamic and constantly evolving environment., • What we’re doing at Monzo excites you! Not ticking every box? That’s totally okay! Studies show that women and people of colour might hesitate to apply unless they meet every single requirement. At Monzo, we’re dedicated to creating a diverse and welcoming team. If you’re passionate about this role and keen to learn and grow with us, we encourage you to apply— even if you don’t have everything that's listed just yet. Drop us your application, we’d love to hear from you! 🙌What’s in it for you 💰£56,000 - £70,000 dependent on experience ➕ share options. 📍This role can be based in our London office, but we're open to distributed working within the UK (with ad hoc meetings in London/Cardiff) ⏰We offer flexible working hours and trust you to work enough hours to do your job well, and at times that suit you and your team. 📚£1,000 learning budget each year to use on books, training courses and conferences. 🏡We will set you up to work from home; all employees are given Macbooks and for fully remote workers we will provide extra support for your work-from-home setup. ➕ Plus lots more! _. 🌈 The application journey has 3 key steps: • Recruiter Screening Call, • 45 Minute Role Specific Interview, • 45 Minute Behavioural Interview This process should take around 2-3 weeks - your schedule is really important to us, so we promise to be as flexible as possible! We have some guidelines on using Artificial Intelligence (AI) to ace an application and interview at Monzo. _ You’ll hear from us throughout the application process, but if you’ve got any questions, please reach out to business-hiring@monzo.com. You can also use this email address to let us know if there’s anything we can do to make the process easier for you because of disability, neurodiversity or anything else. For more insight into the hiring experience at Monzo, check out our blog post. We’ll only close this role once we have enough applications for the next stage. Please submit your application as soon as possible to make sure you don’t miss out. #LI-TP2 Equal opportunities for everyone Diversity and inclusion are a priority for us and we’re making sure we have lots of support for all of our people to grow at Monzo. At Monzo, we’re embracing diversity by fostering an inclusive environment for all people to do the best work of their lives with us. This is integral to our mission of making money work for everyone. You can read more in our , 2024 and 2024 _ We’re an equal opportunity employer. All applicants will be considered for employment without attention to age, ethnicity, religion, sex, sexual orientation, gender identity, family or parental status, national origin, or veteran, neurodiversity or disability status. If you have a preferred name, please use it to apply. We don't need full or birth names at application stage 😊

Senior Security Engineer (AI & DevOps) iProov provides science-based biometric solutions that enable the world’s most security-conscious organizations to streamline secure remote onboarding and authentication for digital and physical access. Our award-winning liveness technology and iSOC offer unmatched resilience against deepfakes and generative AI threats while ensuring effortless, scalable user experiences. Trusted by leading governments and enterprises, including the U.S. Department of Homeland Security, U.K. Home Office, GovTech Singapore, ING, and UBS, iProov sets the standard in biometric identity assurance. This global trust is built not only on our technology but on the strength of the people behind it. For us, diversity at iProov is about reflecting the customers we serve, holding the principles of equality and inclusion at the heart of everything we do and all that we stand for, embracing differences, creating possibilities, and growing together. We aim to foster a culture where individuals of all backgrounds feel confident in bringing their whole selves to work, feel included, and their talents are nurtured, empowering them to contribute fully to our purpose. The Role Reports to: Head of Cybersecurity Location: WeWork Waterloo - Hybrid ( Comp: $ (Base) + Company Performance Bonus (20%) + Share Options + US iProov Benefits The role was created specifically to provide the technical security depth that will allow us to accelerate our adoption of agentic AI, equipping developers and data scientists building our biometric products with the tools and workflows to use AI safely and at pace. You will work as the direct counterpart to our GRC-focused InfoSec Manager, owning the engineering and implementation side of our security posture across cloud infrastructure, developer workflows, AI systems, and our core security toolstack. This is a role for someone who has built and shipped software or infrastructure and brings that experience into a security context. • Architect and deploy the secure technical framework that governs the security controls for how our developers and scientists use agentic AI, including AI coding assistants, autonomous agents, and LLM-integrated tooling. Given that these systems can autonomously access data, execute code, and interact with external services, the guardrails you design will need to address a substantially broader attack surface than traditional AI tooling, and must hold up in a context where the underlying data is among the most sensitive we handle., • Be the primary technical security voice in decisions around the use and deployment of externally developed AI, ensuring the right controls are in place from the onset, • Continuously mature automated security controls into CI/CD pipelines and infrastructure-as-code deployments, championing the DevSecOps culture across a large engineering organisation., • Take hands-on ownership of our core security technology stack, including Wiz, CrowdStrike, Google SecOps, and Tailscale, ensuring these platforms are correctly configured, tuned, and integrated., • Drive continuous technical delivery of strategic security initiatives, systematically identifying, triaging, and closing gaps across our cloud environments, internal networks, and developer workflows., • Provide technical oversight of the security of the data pipelines feeding our internal AI systems and, critically, the permissions and access boundaries of agentic AI systems reaching out into other environments, enforcing the principle of least privilege, maintaining audit trails, and ensuring sensitive data and code integrity is handled with the rigour required., • Complement the work of our existing biometric and product focused Red Team by owning security coverage of the DevSecOps surface, the build pipeline, internal toolchain, cloud environments and developer infrastructure., • Act as the primary technical security partner to our GRC-focused InfoSec Manager, translating governance and compliance mandates into concrete, automated engineering controls., • Represent the technical security function in external audits. This includes presenting evidence of controls, articulating the security posture of our cloud and AI environments to auditors, and working closely with the InfoSec Manager to ensure the technical substance behind our compliance position is clearly and credibly communicated., • A foundational background in software engineering or DevOps before moving into a dedicated security role: you understand how code is written, tested, and deployed, and that experience is central to how you approach security problems., • Proven, hands-on experience securing modern cloud infrastructure and containerised environments, with a solid understanding of infrastructure-as-code principles and the security implications of how infrastructure is defined and provisioned., • Proficiency in deploying and administering enterprise security platforms, ideally with direct experience managing tools spanning CNAPP, EDR, SIEM, and zero-trust networking., • A heavy and active user of AI in both professional and personal contexts, including agentic AI tools and coding assistants, with a grounded understanding of the evolving AI threat landscape, including model supply chain risks, prompt injection, data exfiltration, agent misuse, and LLM-specific attack vectors., • Scripting and automation capability, particularly in Python, to build internal tooling, automate security checks, and reduce reliance on manual processes across the security function., • Prior experience or a demonstrated practical interest in securing AI workloads, data pipelines, and machine learning environments., • The communication skills to collaborate effectively with highly technical stakeholders, champion security initiatives without hindering developer productivity, and translate risk into language that resonates with both engineering peers and business leadership, including the confidence to present technical security evidence clearly in formal external audit settings., • 25 days Annual Leave, plus 8 Bank Holidays (more holiday with service - up to an extra 5 days off per year based on your continuous service), • Growth Shares allocated after passing probation (6 months of service), • Salary sacrifice schemes including: Pension, Cycle To Work and Electric Car Scheme, • Nursery Sacrifice Scheme, • Work Overseas Perk - Work globally for up to 2 weeks, • Life Assurance, • SmartHealth - Access to private GP, Psychologist, Nutritionist along with tailored fitness plans for both you and your family, • Benefit from personalized 1:1 career coaching with our in-house Occupational Psychologist, • Award winning L&D platform with personal allocated training budgets, • Enhanced paid family leave, • Pension - 5% employee, 3% employer, • Flexible hybrid working environment, • Free Barista Coffee/Tea, biscuits with fruit in the WeWork office, • Free access to WeWork discounts and free online well-being sessions, • Vitality Health - a range of options available on this below The Vitality Programme includes a number of reward benefits that all employees have access to as part of the plan, for example: • Private Health cover including Dental, Optical, and Audiology, • 50% off monthly gym memberships, • Apple watches significantly discounted based member vitality status, • Half price trainers with Runners Need, • Weekly rewards – Free coffee with Café Nero, • Monthly rewards – Free Cinema ticket, • Discounts on travel with Expedia (hotels) and Mr & Mrs Smith with discounts getting greater throughout the year based on a members vitality status, • Amazon prime free months based on activity, • Up to 25% cashback at Waitrose when buying healthy foods, • 75% off stays at Champneys Health Spas, • Allen Carr’s £299 no smoking programme for free, • Access to Vitality Healthy Mind with 30% off Headspace subscriptions and the ability to earn Vitality points for using Buddhify, Calm and Headspace, • Discounts on Weight Watchers, • 50%-80% off Comprehensive Private Health screenings Our Culture & Recruitment Process At iProov, we're incredibly proud of the culture we've carefully curated. Our culture enables diverse thought, curiosity and innovation. Our team strives to do everything to the highest standard possible to achieve the remarkable. To do that we need different perspectives, experiences and ideas alongside an environment where these are welcomed - we want everyone to feel confident in bringing their full capabilities to work. We firmly believe psychological safety is key to building and nurturing great teams. We’re a small and dynamic company, that means having the right skills is important, and we know that our best work emerges when people feel secure, welcomed and respected. As an equal opportunities employer, we encourage applications from people of all backgrounds. We’re committed to building a workforce that is representative of the people we serve. We will not put someone at a disadvantage or treat them less favourably because of race, color, national origin, ancestry, age, disability, creed, religion or belief, sex, sexual orientation, gender reassignment, marriage or civil partnership, or pregnancy and maternity. Our goal is to find people who are passionate about creating a safer, more secure world. Our recruitment process is designed to be fair and transparent, focusing solely on your qualifications, competence, and suitability for the role. We review all applications carefully and will be in touch with shortlisted candidates regarding the next steps in our interview process. If you need an adjustment for a disability or any other reason during the hiring process, please send a request to _

Warehouse Operative We are looking for a full time and permanent Warehouse Operative. The ideal candidate would ideally hold a Counterbalance Forklift Licence or who is willing to go through the FLT Training to join our team at the Tamworth Operations Centre to assist with our Washrooms, Healthcare and Floorcare Divisions. The key responsibilities of a Warehouse Operative at phs will involve; • To maintain the relevant paperwork., • Preparing Stock for Drivers., • To keep stock areas clean and tidy always., • To carry out stock takes as and when requested., • To carry out any task deemed necessary by the Operations Manager., • To liaise and form good working relationships with other members of staff within the Branch., • To fully comply with current health and Safety legislation and procedures. The ideal candidate for a Warehouse Operative role at phs will:, • Having the manual handling capability to handle large amount of stock daily., • Ability to work under pressure., • Forklift licence., • Health and Safety., • To carry out all operations and activities in the prescribed manner., • Use the correct tools and equipment for the operation including any relevant safety equipment or protective clothing., • Report any defects in equipment or protective clothing immediately., • Avoid improvising or taking short cuts which would entail unauthorised or unnecessary risks., • Maintain a clean & tidy working area., • Report accidents or near miss incidents promptly., • Suggest ways of eliminating or reducing hazards., • Cooperate with accident/incident investigations in order to prevent reoccurrence., • Develop a personal concern for their own safety and that of their colleagues. In return for your commitment and expertise, you will get:, • Normal working week – 40 Hours over 5 days Monday to Friday., • Salary paid 4 Weekly., • Be presentable with good verbal and written skills, • You’ll be working with a great team including a supportive senior management team., • You’ll be a key and important player in an exciting transformation of our business., • You’ll have a full, thorough induction with technical and product training., • Opportunity for career development!, • Pension Scheme., • Company Benefits including discount schemes., • Your annual leave will be 31 days (inclusive of Christmas Day) so you have 30 days to book throughout the holiday year. Due to the nature of our work, bank holidays are normal working days except for Christmas Day. About phs: Phs Group was founded in 1963 and we are the leading provider for Hygiene Services in the UK, Spain and Ireland with over 90,000 customers across 300,000 locations incorporating numerous businesses during its 57 years of business. Our businesses include: Washrooms, Healthcare, Floorcare, Phs Direct and Direct 365 (sale of consumables), Phs Greenleaf, Teacrate, Besafe, Wastekit and Compliance. At phs, we pride ourselves on our diverse workforce, and ensuring we have an inclusive environment for all our staff. We remain committed to ensuring our teams can bring their true selves to work without risk or fear of discrimination.

Gigged AI is an open talent marketplace specialising in the IT and technology sector. We have an opportunity live at the moment for a Full Stack Java Developer. Duration: 4 months Location: UK, hybrid working TBC IR35: Outside IR35, pending final determiantion Start: End of June All applicant proposals will be reviewed directly on the Gigged AI platform by the hiring manager. In order to send a proposal please follow the below steps • head to app.gigged.ai and create a free talent profile, • once signed in, follow this link to the project - _, • you will now see a 'submit proposal' button, • please fill this in (intro, relevant experience, and attach CV to this) Context The client operates a structured IT function aligned to ITIL principles, with established governance including CAB, release control, and security/compliance aligned to ISO standards. Significant progress has been made in governance, incident management, and security. The objective now is to evolve to a fully integrated, scalable, and measurable operating model. While core controls exist, there is inconsistency across end-to-end processes, particularly in demand management, execution discipline, and release management, resulting in variability in delivery quality, efficiency, and auditability.. Objective Technical Improvement Consultant needed to support the below: • End-to-end process integration across demand to delivery, • Improved execution discipline and governance adherence, • Reduction in operational overhead and manual activity, • Establishment of a standardised and scalable release management framework Scope of Work (High-Level Focus Areas) Release Management Review & Improvement • Assess current release processes (CAB, approvals, deployments, communication), • Define an end-to-end release lifecycle model, • Standardise release types (standard / normal / emergency), • Introduce clear release readiness criteria and approval controls, • Align release processes with CI/CD pipelines and change management, • Define release cadence and governance model, • Implement post-release validation and feedback loops, • Establish release metrics Operating Model & Process Integration • Define end-to-end lifecycle (demand → build → test → deploy → support), • Establish clear handoffs and ownership between IT, Product, and QA, • Remove siloed or disconnected processes, • Introduce entry/exit criteria and governance controls Demand & Intake Management • Design a single front door for all IT work, • Define categorisation model (BAU / Change / Project), • Implement prioritisation framework (risk, value, effort), • Establish approval gating before work begins Execution & Tooling Alignment • Align process with tooling (Service Desk, CI/CD, identity platforms), • Eliminate off-process and manual activities (e.g. email-driven changes), • Define minimum execution standards (change records, test evidence, approvals) Metrics & Performance Framework • Define and implement key performance measures