Past jobs in CambridgeCreate job alerts

Advert Please note: Salary scales are effective from 1st April 2026 \n To provide or assist with the provision of a full and comprehensive janitorial service within the relevant location and to undertake the cleaning of designated areas within the premises and ensure that they are maintained in a clean and hygienic condition. \n Duties include to ensure the security of the premises and its contents. Ensure the lighting and heating of premises (including maintenance and operation of plant). \n Oversee and supervise cleaning staff as required. Within designated areas of premises (which may include toilets and shower areas) carry out cleaning, washing, sweeping and vacuum cleaning duties using approved cleaning agents and equipment. \n On completion of additional years of service by 1 January of each year, following the anniversary of the date of appointment, your term time salary will be adjusted to include a payment in lieu of the additional leave day accrued at the beginning of each leave year for the first 10 years of service. \n This post is considered Regulated Work with Children, under the Protection of Vulnerable Groups (Scotland) Act 2007. It is an offence therefore to apply if you are barred from working with children. In addition to this, if you have lived or worked in any country outside the UK in the past 10 years, there may be a requirement for an overseas police check. \n For details of our employment policies and terms and conditions, please visit our Council Careers page \n Please note – all applicants will be asked to provide proof of their right to work in the UK, and any offer of employment will be conditional upon verifying documentary evidence before employment commences. Further information can be found here: \n Please note – East Renfrewshire Council does not provide Visa sponsorship. \n References – during your application form completion you must provide details of a minimum of 2 referees, 1 of which should be your most recent or current employer. It is also a requirement that the referees are your previous/current managers and are not the details of work colleagues operating at the same level as you or personal referees. Please note only work email addresses for referees will be accepted. Please contact with any questions. Additional Information Please click on the attachments below for full details of this post.

Advert Applicants should be able to demonstrate the necessary skills and experience to teach across the age and ability range and to play an active role in assisting to take St Ninian’s High School forward within the context of one of Scotland’s highest performing local authorities. \n Teachers who apply for a post in a Roman Catholic school are required to seek RC Church Approval at the time of applying for a post. Details on applying for RC Approval can be found here \n A link to the General Teaching Council (Scotland) Professional Standards Registration can be found here: GTCS Standards \n This post will commence in August 2026. Probationer teachers in the Teacher Induction Scheme, due to qualify in June 2026 are eligible to apply. \n East Renfrewshire Council has launched a new 15 year Community Planning Partnership vision called ‘A Place to Grow’. Please follow this link to watch a video and read our full plan which sets out our shared hopes and aspirations between now and 2040 so that East Renfrewshire is a place where everyone can flourish, thrive and grow. \n Please note – all applicants will be asked to provide proof of their right to work in the UK, and any offer of employment will be conditional upon verifying documentary evidence before employment commences. Further information can be found here: \n Please note East Renfrewshire Council does not provide Visa sponsorship. \n As an employer, we are committed to promoting and protecting the physical and mental health of all our employees. \n This post is considered Regulated Work with Children, under the Protection of Vulnerable Groups (Scotland) Act 2007. It is an offence to apply if you are barred from working with children. In addition to this, if you have lived or worked in any country outside the UK in the past 10 years, there may be a requirement for an overseas police check. \n Additional Information Please click on the attachments below for full details of this post.

Advert As part of the leisure team you will be responsible for the effective delivery of front line services to the public, ensure the safety and behaviour of the public is controlled and provide trained assistance in the form of lifesaving skills when necessary. You will also set up and dismantle equipment and carry out general cleaning duties. \n You must have a current RLSS Pool Lifeguard qualification or equivalent and have previous experience within the leisure Industry, either in the public or private sector. You should have good communication skills, knowledge of customer care issues and be able to work in a team environment. Ability to work shift and irregular hours including weekends is required. \n Candidates who are successful in advancing to interview stage, will be required to undertake a water competency test which will involve: \n\n • Swim 100 metres.\n, • Assorted contact tows in deep water.\n\n, • Arm Support\n, • Hip Support\n, • Under Shoulder\n\n, • 2 Timed swims (with Torpedo Buoy)\n, • Vice grip / Spinal turn and tow,\n, • Recover casualty from deepest part of pool and tow to pool edge,\n \n Additional Information Please click on the attachments below for full details of this post.

Role: Nursery Manager Employer: The Orchard Day Nursery Cambridge Location: Cherry Hinton Hall, Cambridge Contract Type: Full time (40 hours per week) Contract Term: Permanent, 52 Weeks Start Date: As soon as possible Salary: Up to £50,000 depending on experience Website: We are currently looking for a passionate and experienced Nursery Manager to undertake an exciting new role at The Orchard Day Nursery Cambridge. With The Orchard Day Nursery Cambridge introducing a Baby room for the first time and expanding we require the manager to join and lead our setting. At Orchard Day Nursery, we offer a unique environment for children from 6 months to 5 years old, providing the best nursery experience in Cambridge. In our baby room, toddler room, and pre-school room, we pride ourselves on providing the highest quality child-centred holistic care in a secure, welcoming and inclusive environment which both supports and challenges children to make the best progress they can to reach their full potential. We are seeking an experienced, passionate Nursery Manager to lead our nursery. You will be part of a close-knit team, and shape an inspiring and nurturing environment for our youngest learners. You will take full responsibility for the day-to-day management of the nursery, ensuring excellence in teaching and learning, maintaining strong operational and financial oversight and developing your team to reach their full potential. This is a fantastic opportunity for an experienced Nursery Manager, or an ambitious Deputy Manager ready to take the next step to make a meaningful impact in a well-established, high-quality setting. This is a full time, permanent all year round role. We welcome applications from current managers or experienced deputies looking for their first managerial role. You will be welcomed into our experienced and warm team of staff. Interested applicants are welcome to contact Tom Havard, Head of Recruitment and Resourcing at Inspired Learning Group, for an informal conversation about the posts on 07706323847 or to email We reserve the right to close this vacancy earlier than the date advertised. Please apply by visiting - Inspired Learning Group is committed to safeguarding and promoting the welfare of children, and applicants must be willing to undergo child protection screening appropriate to the post, including checks with past employers and the Disclosure and Barring Service (DBS).

Structural Engineer Cambridge £40k-£55k Do you have several years of buildings design experience and a strong academic background? Hungry for career progression and great projects? Interested to find out more about working for this 70 strong innovative and design led structural design practice? This role is to be based in their small, but growing, Cambridge studio, which currently has just under 10 staff. This is a design led practice with exciting and challenging architecturally led work, a focus on sustainability and a 'thinking outside the box' approach. You should be keen to work on a variety of projects, often award-winning,ranging from small to large scale in all areas of new build and refurb. There is a high proportion of Chartered Engineers and excellent Chartership training is provided. The office is a creative studio environment. Ideas sharing is important and there are regular CPD sessions. Benefits include: • Good basic salary, • Regular socials including annual weekend abroad and summer bar b q, • Regular CPD sessions, • Excellent training for Chartership and subs paid, past papers practice sessions, etc, • 28 days holiday + bank hols, • 9 day fortnight work (optional), • Company mobile, • Life Coach and Wellbeing, • Pension, • Bonus Scheme, • Flexible and friendly working style

Business Development Manager required for a freight forwarding company - Air/Ocean freight, this role is for the Cambridgeshire area of England. This company is growing very fast, this is a new role being created to increase the capacity within the team in the South. This company is a logistics and freight company with various parts to the business. upto £50k + bonus + car allowance+ Mobile phone + laptop + 32days holidays The role As a business development manager you will be allocated a patch, you will work on winning new business and increase repeat business and extra spend per client. The role will cover Air and Ocean freight, This is a varied sales role and will include all the standard duties of a Business Development Manager. Experience We are looking for a Business Development Manager from Logistics background with a air/ocean freight sales background. * Business Development Manager * Cambridgeshire patch * Logistics * upto £50k + bonus * car allowance * Mobile phone * laptop * 32days holidays (inc bank holidays) Apply today HtE Recruitment over the past 14 years has been trusted by professionals across the UK in finding their next job. As well as this role, our Logistics Recruitment team has a wide range of other roles across the UK. If you are currently looking for a move, contact HtE Recruitment today. HtE Recruitment is acting as a Recruitment Agency in relation to this pe...

Chefs Required Progression to Head Chef Stazione Restaurant, Cambridge Stazione Restaurant, located in the heart of Cambridge, is currently seeking talented and ambitious Chefs who are looking to develop their careers and progress towards a Head Chef position. As a well-established Italian/Mediterranean restaurant, highly regarded and recommended by major food guides for our refined cuisine, we have built an excellent reputation over the past 30 years. Due to our continued success and expansion, we are now looking to strengthen our kitchen team with passionate professionals who bring creativity, dedication, and a genuine love of food. Benefits • Flexible shift patterns available, • Daytime-only shifts or double shifts available, • Permanent contract, • Part-time positions available, • Excellent opportunities for further career progressionJob Details Working alongside our experienced kitchen team in a dynamic restaurant environment, you will assist in the preparation and delivery of high-quality Italian/Me...

Their Air & Sea division has experienced remarkable growth over the past two years, and they are not slowing down! They are expanding their UK team and looking for a passionate and driven Business Development Manager to join the East of England sales team based anywhere in the Cambridge, Northampton

We’re excited to offer a fantastic opportunity for someone looking to begin their career through a Projects apprenticeship. This role provides structured training, valuable on the job experience, and the chance to develop skills that will set you up for long-term success. At Portakabin, we provide modular buildings for hire and sale for organisations of any size, in sectors ranging from manufacturing, education and health to transport, utilities and construction. We’re looking for a motivated apprentice who will bring energy, creative new ideas and a fresh perspective to help Portakabin continue to innovate, lead and transform the world of modular buildings. As a Projects Apprentice at Portakabin you will be based at our Peterborough Hire and Service Centre. Your role will be supporting the team to assistance with the co-ordination and implementation of a variety of projects. You will learn what needs to be achieved to deliver successful projects; utilising resources to support with the management of projects whilst building an appreciation for costs, the need for good planning, organisation, leadership, management and communication skills. Our professional apprenticeship programme has been developed to ensure you are supported throughout every step of your journey. Your 2-year apprenticeship will be delivered through a blended learning approach supported by our learning provider, Heart of England. You will be stretched, challenged and supported by a business that views your professional development as a priority. During the programme you will complete a Level 4 Associate Project Management apprenticeship. Role Details: • Annual Salary - £20,000, • Role based: Peterborough Hire and Service Centre, PE4 5ET, • Contract type: 36.25 Hours Per Week, • Annual leave of 25 days per annum plus bank holidays, • Support with the management of stakeholders, taking account of their levels of influence and particular interests., • Communicate with a variety of audiences and developing your ability to negotiate., • Have an awareness of project budgets and build an understanding of planned and actual costs., • Determine, control, and manage changes to the scope of the project, including assumptions, dependencies, and constraints., • Be involved with monitoring the progress of projects., • Identify and monitor project risk or opportunity, plan and implement responses to them, contribute to risk registers., • Understand the resources required to successfully deliver a project, including colleagues, sub-contractors, and how to manage these., • Gain awareness of Health & Safety; and become confident challenging or raising concerns if something doesn’t look right; resilient in conversations with site teams., • Gain site based confidence; role is not purely office based; the candidate must feel comfortable working on active construction sites., • Become comfortable around heavy plant and logistics; including large cranes, HIABs, and lorries (often abnormal loads with escorts)., • After a period you will conduct site visits and travel between locations. What we’re looking for…. • 5 GCSEs including Maths and English at Grade 4 or above (A-C), • A candidate with a positive attitude, resilience and willingness to learn – be able to adapt quickly, learn technical processes, and manage varied environments., • Fantastic communication skills – both in person and virtually!, • A strong understanding of Microsoft Word, Excel and PowerPoint, • Good organisation and planning skills, • Practical problem solving mindset; able to assess access, constraints, enabling works, and technical challenges on site., • Experience working in customer service or a client facing role (desirable but not essential), • Full UK Driving License (desirable but not essential). Due to the high volume of site visits and travel between locations. We have lots of fantastic success stories from previous apprentices who have gone on to achieve industry recognised qualifications through their apprenticeships and many of our past apprentices are still working within the business today or have gone onto have successful careers elsewhere. Our workplace culture will allow you to pick up not only the knowledge and skills to be used in your future career but also experience working in a professional but relaxed environment that will give you the confidence to excel in your role and develop as a professional. We truly believe that we put our people at the heart of everything we do, and you will have the job security and development opportunities that are rare in the current climate, so why not join us, and be a part of our continuing growth and success? With exciting future ambitions, we couldn’t think of a better time for you to join us. Apply… If interested, please submit your application as early as possible, applications will be reviewed on receipt. Important Dates: Closing Date: - Monday, 13 April Interviews: Commencing April - You will be contacted for in person interviews. Offers issued: Mid-May NOTE: If we receive a high volume of applications for a role, we reserve the right to close a vacancy earlier than scheduled. • A range of dedicated health and wellbeing services, • Employee Assistance Program, • A chance to give back to your community with an annual Volunteering Day Off, • Cycle to Work Scheme, • Employee Benefits Program (Discounts at 100s of shops, gyms, restaurants and even holidays!)

VolkerLaser repairs, strengthens and waterproofs concrete and steel structures, offering a tailored package of specialist works to clients across the UK. Our structural solutions include bridge deck waterproofing, expansion joints, concrete repair and cathodic protection works, steel repair and strengthening work, carbon fibre and temporary works, jacking and bearing replacement. We also provide specialist lightweight decking and access solutions, as well as being specialists in long bridge and cable refurbishment. If you think you are the right match for the following opportunity, apply after reading the complete description. We have an exciting opportunity for a Quantity Surveyor to join our Major Projects division, to cover upcoming secured projects across Scotland, predominantly across the Central Belt. This position plays a vital role in driving the commercial success of our projects, working under the guidance of a Commercial Manager and supporting all stages of project delivery-from procurement through to the agreement of final accounts. About you • You will have experience with NEC forms of contract, • Experience within Civil Engineering/Highways would be advantageous, • You will have gained experience as an Assistant Quantity Surveyor and Quantity Surveyor, • You will hold an accredited course by the Royal Institution of Chartered Surveyors (RICS). Why work with us? VolkerLaser is under the umbrella of VolkerWessels UK which is a multidisciplinary contractor that delivers innovative engineering solutions across the civil engineering and construction sectors including rail, highways, airport, marine, energy, water, and environmental infrastructure. By utilising the specialist skills of each business unit within VolkerWessels UK, VolkerLaser are able to ensure our staff provide unrivalled resources and expertise to our clients. We offer competitive rewards and benefits, recognising the value we place on our employees. We offer a range of benefits, including: • Competitive salary, • Competitive annual leave and an additional day off on your birthday, • Option to buy additional annual leave, • Private medical care, • Pension, • Life Assurance, • Cycle to Work scheme, • Shopping and restaurants vouchers, rewards, and discounts, • Training and development opportunities-comprehensive skills-based training, • Family friendly polices including enhanced maternity benefits, • Employee Assistance programme, • Mental health, physical health, and financial support We believe in pushing boundaries in the pursuit of fairness, inclusion and respect. So, our teams can be comfortable that, whatever their background, VolkerWessels UK is a place where they can be themselves and thrive. xrnqpay If you need support with your application, please contact us at Additional information Note for Recruitment Agencies: Our preference is to hire directly, and we will reach out to our Preferred Supplier List (PSL) agencies if this particular role qualifies for release. We kindly request that you refrain from sending speculative CVs. In the event of speculative CV submissions, no fees will be applicable, and we kindly ask that all inquiries to be directed VolkerWessels UK is committed to maintaining healthy, safe and productive working conditions for its entire staff and therefore a drugs & alcohol screening is mandatory for all. #LI-FS1

Structural Engineer Cambridge £40k-£55k Do you have several years of buildings design experience and a strong academic background? Hungry for career progression and great projects? Interested to find out more about working for this 70 strong innovative and design led structural design practice? This role is to be based in their small, but growing, Cambridge studio, which currently has just under 10 staff. This is a design led practice with exciting and challenging architecturally led work, a focus on sustainability and a 'thinking outside the box' approach. You should be keen to work on a variety of projects, often award-winning,ranging from small to large scale in all areas of new build and refurb. There is a high proportion of Chartered Engineers and excellent Chartership training is provided. The office is a creative studio environment. Ideas sharing is important and there are regular CPD sessions. Benefits include: • Good basic salary, • Regular socials including annual weekend abroad and summer bar b q, • Regular CPD sessions, • Excellent training for Chartership and subs paid, past papers practice sessions, etc, • 28 days holiday + bank hols, • 9 day fortnight work (optional), • Company mobile, • Life Coach and Wellbeing, • Pension, • Bonus Scheme, • Flexible and friendly working style, • No long work hours culture, • Excellent staff retention, • Transparent management style Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. JBRP1_UKTJ

Toshiba Europe Ltd have been at the forefront of research in quantum technology, particularly quantum communications and semiconductor quantum devices for the past two decades. We are inviting applications for a Research Scientist to join our team and advance the development of solidstate quantum em

Toshiba Europe Ltd have been at the forefront of research in quantum technology, particularly quantum communications and semiconductor quantum devices for the past two decades. We are inviting applications for a Research Scientist to join our team and advance the development of solid‑state quantum

Site Security and Pupil Welfare Officer.Salary: up to £31,719 per annum.The Perse School Cambridge is one of the country's leading independent co-educational day schools for children aged 3-18.A Perse education is three-dimensional with all teaching staff contributing to the school's academic, past

A respected charity in Cambridge is looking for a Chief Executive Officer to provide executive leadership.The role involves ensuring the protection of green spaces and historic properties while influencing sustainable development in the region.Candidates should have strong leadership experience, exc

You may also have experience in roles such as CEO, Chief Exec, Managing Director, Head of Operations, Deputy CEO, Deputy Chief Exec, Chief Executive Officer, Department Head, Head of. This is a rare and exciting opportunity to take on the executive leadership of a highly respected and effective char

Regulatory Affairs and Quality Assurance Assistant - Medical Devices - Cambridge Due to the growth of a medical devices company based in Cambridge, there is need for a new Regulatory Affairs and Quality Assurance Assistant to work with and support the company's Quality Assurance and Regulatory Affairs Manager. The team provide quality assurance and regulatory affairs advise on the creation of new products and the improvement of existing technologies. It would be highly advantageous if you have knowledge of design processes, but it's not essential. This team does not just fill out quality assurance and regulatory documents; this is a team where they will be very involved with the R&D team, providing vital advice on the creation of medical devices, and ensuring the team operates within the FDA 510k, ISO 13485, and FDA 21 CFR Part 820 standards. It would be ideal if you have both quality assurance and regulatory affairs knowledge. However, people have moved into this role from either regulatory affairs or quality assurance background, but with a general knowledge in the other side. It is essential that you have medical devices knowledge, especially ISO 13485 and FDA 510k knowledge. Although writing submissions will not be a major part of your role, you will relay information to the teams responsible for this, so ideally you will have done this in the past or at least assisted. Ideally, you will have QMS experience. If you do have this knowledge, I would advise making it clear on your CV as this is highly desirable in this role. The products this company has been developing are industry-changing and will improve the lives of people around the world. It is expected that you would hold a 1st or 2:1 degree within an engineering or sciences discipline along with some experience within regulatory affairs or quality assurance. Although experience working within a medical devices R&D or design team is more important than education. This is a growing company; due to this, they offer career progression, excellent salary, benefits package, the chance to work on life-improving devices, and share options. If you have regulatory affairs knowledge in the medical devices sector and are looking for a challenging role, then apply now. I expect a lot of interest in this role, and the company are looking to recruit quickly. So, if you are interested in this role, I suggest applying immediately or risk missing out.

Mechanical Engineer - Programme Manager - Medical Devices - Cambridge Due to a growth in company output, there is a need for a new Programme Manager who has a Mechanical Engineering pedigree. Based in Cambridge, you will be leading several projects. Some projects will involve you offering support and mentorship to junior members of staff, while other projects will involve you taking on the mechanical design aspects yourself. We are looking for someone who has been working hands on developing new Medical Devices technologies in their current role, while mentoring other members of staff. Most projects will be on electro-mechanical Medical Devices, so you will need to have worked on these types of technologies. They could be implantable medical devices, wearable tech or another medical technology that abide by EN60601 standards. Apart from past work experience, it is expected that you would hold a relevant degree within a suitable subject that led you into a Medical Devices Mechanical Engineering role. It would also be advantageous if you hold a master's or PhD, but not essential as the active work experience in industry is more important. The types of technologies you will be developing are lifesaving and life improving medical devices, truly industry disrupting technologies that will save and improve thousands of people's lives. This role will involve working with external and internal entities, involving a lot of communications both virtual and in real life, due to this it would be advantageous if you have worked in a role that involved communicating updates and project changes continuously. I mentioned knowing about EN60601, but it would also be essential to have a strong understanding of ISO 13485. People who have been successful in this role previously tend to have a highly technical hobby, this could be building drones, tinkering with engines, computer programming or another hobby that involves problem solving. If you do have such a hobby, make sure you highlight it on your CV to give you the best chance of gaining an interview. Apart from working on industry changing technologies, you will be offered a proven career development plan, continuously training to keep you at the forefront of the medical devices sector, excellent salary, bonus, enhanced pension, medical insurance, free meals and other excellent benefits you'd expect from a multinational blue-chip organisation. I expect a lot of interest in this role, so apply now or ensure consideration. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.

Some production environments simply keep the lines running. Others are constantly evolving - improving processes, investing in people and building a culture where teams genuinely care about the product leaving the factory every day. This opportunity sits firmly in the second category. I'm representing a growing food manufacturing business that plays an important role in supplying high-quality products into the UK food sector. Over the past few years, the site has continued to evolve - strengthening its leadership team, investing in its operations and building a culture focused on performance, collaboration and continuous improvement. As the business continues to grow, they're now looking to bring in a Production Manager who enjoys being close to the operation, developing people and improving how things run on the factory floor. This isn't a role where you'll be managing from behind a desk. It's for someone who enjoys being present in the factory, working with teams, solving problems in real time and driving standards that everyone can be proud of. The Opportunity At the heart of this role is ownership. You'll be responsible for a key production area that operates seven days a week, supporting the wider site operation and playing a vital role in overall performance. Working closely with the Site Lead and wider leadership team, you'll lead shift-based teams, ensuring the operation consistently delivers on safety, quality, service and efficiency. But just as importantly, you'll have the space to look ahead - identifying opportunities to improve processes, develop people and strengthen performance across the department. The business is looking for someone who sees production leadership as more than just hitting daily numbers. They want someone who understands that great operations are built through strong teams, clear standards and continuous improvement. What the Role Involves As Production Manager, you'll take full ownership of the performance of your area, ensuring the operation runs safely, efficiently and delivers consistent quality. Your focus will include: Leading the Operation * Taking overall responsibility for the performance of your production area. * Ensuring production targets, quality standards and service levels are consistently achieved. * Monitoring operational KPIs and driving improvements where needed. * Maintaining high standards across GMP, safety and compliance. Developing and Leading People * Leading and supporting a team of shift leaders and operators. * Creating a positive, accountable culture where people take pride in their work. * Coaching and developing team members through regular feedback and performance conversations. * Ensuring teams are well trained, supported and equipped to meet operational demands. Driving Continuous Improvement * Identifying opportunities to improve efficiency, productivity and yield. * Working closely with engineering and technical teams on process improvements. * Supporting well-thought-out investment opportunities in equipment or systems. * Using data and performance insight to guide improvements. Creating a Strong Safety & Quality Culture * Championing a proactive safety culture across the department. * Ensuring processes and standards remain audit-ready at all times. * Reinforcing quality ownership across the entire team. What They're Looking For This role would suit someone who enjoys being close to the action in a fast-paced manufacturing environment and takes real satisfaction in building strong teams. You might currently be working as a: * Production Manager * Manufacturing Manager * Shift Manager * Senior Supervisor ready for the next step Experience we're looking for: * Strong background within food manufacturing * Experience leading teams in high-volume production environments * A track record of improving operational performance * Understanding of manufacturing KPIs, labour efficiency and continuous improvement The Kind of Person Who Thrives Here The people who succeed in this business tend to be: * Hands-on leaders who enjoy spending time on the factory floor * Calm and pragmatic problem solvers * Naturally collaborative with other departments * Focused on developing their teams, not just managing them * Positive, resilient and action-oriented Above all, they take pride in building an environment where people feel supported, standards are high and improvements are always being explored. Why This Role? This is a great opportunity to join a business that is continuing to grow and invest in its operations. You'll be joining a leadership team that values: * Strong teamwork * Operational excellence * Developing people from within The role offers real ownership of an important part of the operation, along with the opportunity to shape how the department develops over time. For the right person, it's a chance to step into a role where your leadership can genuinely influence performance, culture and future growth. If you're a hands-on food manufacturing leader who enjoys building teams and improving operations, I'd be very happy to have a confidential conversation. Please contact Shaf Islam on (url removed) for more information. As you know over here at Zest we like to do things properly and always want to keep you, the candidate in the loop. Applying to this 'one of a kind' role you give Zest permission to hold your information. If you want to know more about how Zest look after your personal information please visit our privacy policy on the website (url removed)

We are recruiting a Research Associate - LCMS to join a leading Pharmaceutical company in the Cambridgeshire area. As the Research Associate - LCMS, you will be responsible for providing practical LCMS support to Discovery Projects, working closely with colleagues across Chemistry and Biology. This is an initial 12 month contract with possible extension. KEY DUTIES AND RESPONSIBILITIES: Your duties as the Research Associate - LCMS will be varied however the key duties and responsibilities are as follows: 1. As the Research Associate - LCMS, you will perform ASMS screening and confirmation to validate compound binding., 2. As the Research Associate - LCMS, you will support other LCMS screening assays to generate in-vitro activity data., 3. As the Research Associate - LCMS, you will optimise LCMS methods as required to support all analytical studies., 4. As the Research Associate - LCMS, you will run HPLC based physical chemistry assays. ROLE REQUIREMENTS: To be successful in your application to this exciting role as the Research Associate - LCMS we are looking to identify the following on your profile and past history: 1. Relevant degree in a role-related field of study, such as BTec, HND, BSc, or MSc., 2. Experience in maintenance, calibration, and use of LCMS systems, and a background in Analytical Chemistry., 3. A working knowledge and practical experience with analytical sciences software, such as Waters MassLynx. Key Words: Research Associate / Analytical Chemistry / LCMS / HPLC / Protein Science / Cambridge / ASMS screening / in-vitro activity / chemical stability / QC / electronic lab notebook / Waters MassLynx / LCMS / Mass Spec / Mass Spectrometry Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the Life Science sectors, combining recruitment expertise with scientific knowledge to help you advance your career

Electronics Engineer - Medical Devices - Cambridge Due to the expanding nature of Medical Devices, Wearable Technologies, Robotics, Artificial Intelligence, and other advanced technologies, we are looking for someone to work on the invention of new Medical Devices. Based in Cambridge, you will be collaborating with engineers and scientists on the development of industry-changing, life-saving, and life-improving medical devices. Technologies are developing all the time, and this organisation needs to stay at the forefront of technological breakthroughs. Due to this, they need experienced Electronics Engineers who are happy to work across several different projects. We ideally need someone who has past experience with Medical Devices within ISO 13485 or EN 60601 standards. While working on brand-new technologies, you will be problem-solving and thinking up exciting new ways of approaching problems on projects. This will keep your role very interesting, meaning it is unlikely that you will ever get bored in this role. Apart from past experiences as an Electronics Engineer in Medical Devices, it is expected that you would hold a degree in an Electronics Engineering field that led you into this line of work. You will be rewarded with an excellent starting salary, bonus, pension, gym membership, free lunches, and other excellent benefits. I expect a lot of interest in this role, so if you are interested, I would suggest making an application now or risk missing out. Please note we will not be able to discuss the role specifics until we have a copy of your CV.

Position: Solar PV Electrician Location: East Anglia - Accepting applications from Norfolk, Suffolk and Cambridgeshire Salary: £45,000 - £50,000 (DOE) A fast-growing contractor within the solar and renewables sector is seeking to appoint a Solar PV Electrician as part of their rapidly expanding installation team. This opportunity comes with a company that has the backing of a £700m turnover group and has achieved over 140% growth in the past 12 months, with clear plans to grow further. Solar PV Electrician Job Overview Travelling to new build housing sites across East Anglia and assisting with the electrical installation stage of solar PV installation projects Carrying out post-panel electrical installation of solar PV systems, including DC string connections, inverter wiring, and integration into consumer units Performing full system testing including any relevant electrical certification Working with roofing installers, site managers, and contract managers to ensure projects are completed fully and efficiently Solar PV Electrician Job Requirements Fully Qualified Electrician, NVQ Level 3, 18th Edition, 2391 Test and Inspection ECS/JIB Gold Card holder Full UK driving licence Any experience working directly on solar systems is desirable but not essential Based within East Anglia and happy to travel to sites across the area Solar PV Electrician Salary & Benefits Basic Salary: £45k - £50k, depending on experience Company van provided Overtime paid at 1.5x hourly rate 25 to 30 days holiday, plus Bank Holidays Pension scheme Company bonus scheme 2 years death in service cover Critical illness cover Regular team and companywide social events Comprehensive in house and external training and development Access to Udemy and other training platforms Strong opportunities for career and personal growth with a clear progressive employerBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Structural Engineer Cambridge £40k-£55k Do you have several years of buildings design experience and a strong academic background? Hungry for career progression and great projects? Interested to find out more about working for this 70 strong innovative and design led structural design practice? This role is to be based in their small, but growing, Cambridge studio, which currently has just under 10 staff. This is a design led practice with exciting and challenging architecturally led work, a focus on sustainability and a "thinking outside the box" approach. You should be keen to work on a variety of projects, often award-winning,ranging from small to large scale in all areas of new build and refurb. There is a high proportion of Chartered Engineers and excellent Chartership training is provided. The office is a creative studio environment. Ideas sharing is important and there are regular CPD sessions. Benefits include: Good basic salary Regular socials including annual weekend abroad and summer bar b q Regular CPD sessions Excellent training for Chartership and subs paid, past papers practice sessions, etc 28 days holiday + bank hols 9 day fortnight work (optional) Company mobile Life Coach and Wellbeing Pension Bonus Scheme Flexible and friendly working style No long work hours culture Excellent staff retention Transparent management style No glass ceilings hereThis firm do not hold a sponsorship license to employ migrant workers. Sam Robson (phone number removed) Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Mechanical Design Engineer - Principal Level Are you an experienced Mechanical Design Engineer in East Anglia? Do you want to lead the design of pioneering renewable heat projects? Now’s your opportunity to join Vital Energi! Due to a growing pipeline, we are looking for a Principal Mechanical Design Engineer to lead our East Anglia Design Team, based in Cambridgeshire. About the role As Principal Engineer, you will take an active role in growing and leading the East Anglian office of our Operational Design department. The team produces a broad range of conceptual to technical design of major district and communal heating systems, energy centres, commercial heat pump retrofits and industrial low-carbon energy generation systems. The role involves direct leadership of the East Anglia mechanical design team. You will collaborate design team leaders across the UK, helping to shape our continued growth in the renewable heat market and deliver our industry-pioneering design solutions. Key responsibilities. • Lead the design of distributed energy schemes, energy centres, district heating networks and other major projects, • Provide mentorship, workload management and technical oversight of direct report design engineers, • Maintain statutory and regulatory compliance in design processes and deliverables, • Contribute to our continued innovation in engineering practices, digital design techniques and technology deployment, • Ensure time, cost and quality outcomes are achieved in design, • Provide technical support to adjacent project stages, from early pipeline development to construction and commissioning What you will need • Educated to at least HNC/HND level in Mechanical, Building Services or similar Engineering discipline, • Membership to an applicable engineering institution, • A minimum of 5 years’ experience in commercial building services, industrial heat generation or heat network design, • Demonstrable team leadership skills, including past experience in direct line management duties, • Demonstrable design process leadership skills, including the delivery of complex multidisciplinary engineering solutions, • Extensive knowledge of applicable laws, regulations and industrial design standards The following attributes could give you an advantage: • Bachelor or masters degree in engineering, • Chartership to an applicable engineering institution, • Leadership of renewable heat-led energy centre design, • Proficiency in standard industrial digital design tools Applications will be processed within 28 days of receipt. If you have not heard from us within this time period it will mean that your application has unfortunately been unsuccessful. The company is opposed to all forms of discrimination and will select for employment, training and promotion on the basis of suitability for the job and/ or merit. It is company policy that no job applicant or employee receives less favourable treatment than another on the grounds of sex, race, colour, age, ethnic or national origins, political affiliations, religious beliefs, marital status, physical disability or is disadvantaged by unjustifiable conditions or requirements. Applicants must have the unrestricted and ongoing right to work in the UK for the duration of employment, without the need for sponsorship. Due to the nature of this role, we are unable to support visa sponsorship or employ individuals with time‑limited permission or conditions attached to their right to work in the UK Notice to Agency and Search Firm Representatives: Vital Energi Utilities Ltd is not accepting unsolicited CVs from agencies and/or search firms for this job posting. CVs submitted to any Vital Energi Utilities Ltd employee by a third party agency and/or search firm without a valid written & signed search agreement, will become the sole property of Vital Energi Utilities Ltd. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral. Thank you

C Software Engineer - Defence Sector - Cambridge A growing Defence and Security company, based in Cambridge, is currently seeking an experienced C Software Engineer to contribute to the development of breakthrough technologies that will enhance the UK's security against external threats. You will have the opportunity to work on cutting-edge systems architecture, ideally utilizing past firmware and embedded software tools. The projects you will be involved in will truly mind-blowing, challenging you on a daily basis. It would also be ideally, though not essential, if you have previous knowledge and experience in Software-Defined Radio (SDR) and Real-Time Operating Systems (RTOS). There will also be a significant amount of algorithm development, so a strong mathematical background would be advantageous in this role. The company has recently revamped cutting-edge labs, enabling development at the forefront of the sector. This means you will be working on brand-new developments using the latest technologies available. Knowledge of other programming languages such as C++, MATLAB, or Python will also be required. As this role involves working in the defence and security sectors, you will need to be able to obtain (or already hold) security clearance. If you have previous experience in the defence and security field and hold security clearance, this would be highly advantageous. In addition to working within a growing company on some of the most fascinating projects, you will also be rewarded with an excellent starting salary (based on level of experience), bonuses, enhanced pensions, healthcare, gym membership, free lunches, and other excellent benefits you would expect from a larger organisation. If you believe you are well-suited for this role, I suggest submitting an application now to avoid missing out on this career opportunity.

Role: Senior CDM Consultant/ Principal Designer Location: Remote position - projects across the Home Counties & London Sector: CDM/ Principal Designer practice Salary: Up to £68,000 + bonus scheme + attractive benefits package WRG has partnered with a well-established, independent CDM/ Principal Designer consultancy with ambitious growth plans for 2026. The business is looking to appoint an experienced Senior CDM Consultant/ Principal Designer to oversee a varied portfolio of property and construction projects across London and the Home Counties. The consultancy operates on a fully remote basis, with monthly team get-togethers at its London HQ, offering flexibility without losing the benefits of collaboration. Youll work with a diverse client base across the property and construction sector, delivering CDM and Principal Designer services on projects ranging in value from £300k to £500m. Over the past six years, the business has built an excellent reputation within the industry, resulting in strong levels of repeat business and consistent, organic growth. As part of the next phase of expansion, they are seeking a technically strong, confident Senior CDM Consultant/ Principal Designer to manage their own portfolio of projects across sectors including residential, commercial, retail, office, leisure, hotel, and heritage sectors. This role would suit a client-facing consultant from a consultancy background who is looking for greater autonomy, trust, and the opportunity to regain a healthy work-life balance without compromising on the quality or scale of projects. Responsibilities: Offer a range of CDM & PD services to clients. Oversee the design risk register and attend design risk reviews, along with offering input in relation to safety in design. Ensure that pre-construction information is readily available for each project and is kept up to date. Sit in on design and client team meetings and offer advice around safety in design. Preparation of health and safety files and construction phase plans where required. Carry out site inspections and ensure that RAMS are in place for each project. Further build and develop existing client relationships and develop new ones. Requirements: NEBOSH Construction Certificate or equivalent. NEBOSH Diploma or equivalent (desirable but not required). Membership to IOSH, APS, IIRSM or similar professional body. APS 2 Day Principal Designer course or similar qualification. Excellent understanding of 2015 CDM Regulations. Good understanding of BSA and the changes affecting the industry. Excellent interpersonal communication skills. Apply: Salary from £60,000 - £68,000 (dependant on experience). Travel and mileage expenses covered. Remote working environment. Annual bonus scheme. 26 days holiday + 8 days bank holiday. Company pension plan. Private healthcare scheme. Excellent CPD, training and support. Professional membership fees covered. Clear career pathway with opportunities for progression and development. Inclusive company culture with team events, away days etc. If you are interested in the role, or would like more information about the position then please contact Mike @ We Recruit Group | 07562 945 690 TPBN1_UKTJ

Electronics Engineer - Programme Manager - Medical Devices - Cambridge Due to a growth in company output, there is a need for a new Programme Manager who has an Electronics Engineering pedigree. Based in Cambridge, you will be leading several projects. Some projects will involve you offering support and mentorship to junior members of staff, while other projects will involve you taking on the Electronics design aspects yourself. We are looking for someone who has been working hands on developing new Medical Devices technologies in their current role, while mentoring other members of staff. Most projects will be on electro-mechanical Medical Devices, so you will need to have worked on these types of technologies. They could be implantable medical devices, wearable tech or another medical technology that abide by EN60601 standards. Alongside past work experience, it is expected that you hold a relevant degree within a suitable subject that led you into a Medical Devices Electronics Engineering role. It would also be advantageous if you hold a master's or PhD, but not essential as the active work experience in industry is more important. The types of technologies you will be developing are lifesaving and life improving medical devices, truly industry disrupting technologies that will save and improve thousands of people's lives. This role will involve working with external and internal entities, involving a lot of communications both virtual and in real life, due to this it would be advantageous if you have worked in a role that involved communicating updates and project changes continuously. I mentioned knowing about EN60601, but it would also be essential to have a strong understanding of ISO 13485. People who have been successful in this role previously tend to have a highly technical hobby, this could be building drones, tinkering with engines, computer programming or another hobby that involves problem solving. If you do have such a hobby, make sure you highlight it on your CV to give you the best chance of gaining an interview. Apart from working on industry changing technologies, you will be offered a proven career development plan, continuous training to keep you at the forefront of the medical devices sector, excellent salary, bonus, enhanced pension, medical insurance, free meals and other excellent benefits you'd expect from a multinational blue-chip organisation. I expect a lot of interest in this role, so apply now or ensure consideration. For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on (phone number removed). Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information

Principal Mechanical Design Engineer - Medical Devices - Cambridge A growing Medical Devices team, based in Cambridge, is currently seeking an experienced Mechanical Design Engineer to lead the development of cutting-edge Medical Devices in the fields of Health Technology, Biotech, and Wearable Tech. The ideal candidate will have a proven track record of developing devices to ISO 13485 standards that have successfully reached the market, spanning various sectors within Medical Devices. In addition to past experience in inventing and designing Medical Devices, candidates are expected to hold a degree in a relevant field that led them into Mechanical Design or the Medical Devices industry. You will collaborate with a multidisciplinary team of experts, including Industrial Designers, Electronics Engineers, Physicists, Software Engineers, and Scientists. Some projects may require you to take the lead, which is why this is a principal-level design engineer role. This company places a strong emphasis on providing continuous training and development to help you advance your career. In addition to career development and the opportunity to work on cutting-edge technologies, you will receive an excellent salary, annual bonuses, healthcare coverage, gym membership, an enhanced pension, and other outstanding benefits. The company's expansion is driven by successful growth plans, including the construction of brand-new labs. If you are seeking an exciting and challenging career, we recommend submitting an application now to start the recruitment process. The organisation frequently creates roles for individuals with the right skills. Therefore, even if you believe the role may be slightly too senior or junior for you, we encourage you to apply so that we can explore potential opportunities together. Alternatively, you can submit an application, and a member of our team at Newton Colmore will be in touch. Newton Colmore Consulting is a specialist recruitment company focused on the Medical Devices, Science, and Machine Learning fields.

Job Title: Stylist Client: Dyson Contract: Till end of December 2026. Location: Cambridge, UK Payrate: £12.50 per hour - PAYE Working hours: 16 hours (Saturday and Sunday) About Dyson: April 2016 saw the launch of Supersonic - hailed as a 'game-changer' by Vogue; it has revolutionized the hairdryer market and category. Dyson rethought the way that people dry their hair and the reviews have been fantastic. Following the success of Supersonic Dyson launched the Airwrap, an industry first, giving the user the ability to curl wave and smooth their hair without using extreme heat. This was then followed by the Dyson Corrale, a hair straightener with flexing plates that cause half the damage than conventional straighteners. As part of the Stylist team. This is done through the active demonstration of Dyson products and delivering outstanding customer experience. Responsibilities: Assisting customers by introducing the powerful features of our Dyson hair care products, styling different types of hair, and demonstrating the correct product, for their type of hair. Assisting the wider store team in demonstrating a range of other Dyson products. Provide an authentic and premium customer experience. Develop and drive sales aligned with business plans and targets. Build relationships with the in -store team and support throughout the day.Qualifications: An individual who has experience in styling hair and good customer service. Past retail experience would be desirable but not essential. An Enthusiastic and passionate about new hair care technology and can engage with customers about which Dyson product would best suit their hair type. An ambitious spirit will be necessary for ensuring growth within the store. Excellent communication skills and a real passion for giving the customer a first -class experience.What happens next: Your application and CV will be carefully reviewed by the recruitment team managing this position. If your experience matches the role requirements, we will contact you within 48 hours to discuss the opportunity and outline the next steps. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

Technology development, proof of concept and prototyping with diverse applications Cambridge (south); to £80k DoE plus good benefits This small and multi-disciplinary group within a larger company develop diverse, groundbreaking electronics technologies. Explore new challenges, collaborate, and see your work come to fruition in months rather than years – and then onto the next challenge. You’ll get to co-develop systems which combine advanced sensors, imaging, EM, acoustics, fluidics and AI, with applications in edge computing, instrumentation and special projects. You may apply skills in digital electronics, FPGA, DSP, embedded code, analogue electronics and RF. Along with the innate perks of such work, the company offer a generous salary, strong pension contribution, catered lunches, social and leisure facilities, and family-friendly leave policies. Your CV will show your strong relevant degree and supporting qualifications, and additional experience, likely commercial, or through a master’s degree and/or PhD. In addition, your experience will include several of: • Digital electronics design, schematics capture and PCB layout, • FPGA design, RTL development in VHDL / Verilog / SystemVerilog, • DSP, signal processing and/or related algorithms, • Analogue electronics, which may include work with sensors, RF or microwave EM, • Network protocols design and communications generally, • Embedded software in C, C++ and/or Rust It is likely you will have collaborated with other engineers and scientists on past projects. Any additional experience in Python, C#, MATLAB or other software systems is a plus. Some projects may involve security clearance, hence you will need to be a British citizen with 5+ years’ UK residence. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call (phone number removed) or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27582) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate

Security Cleared Firmware Engineer - DSP Engineer - Cambridge - Spin-Out Company A new Spin-Out company, based in Cambridge, providing product development for Security Cleared sectors, is currently looking for an experienced Firmware Engineer or DSP Engineer to work on a wide range of new technologies. You will be working on a range of new technology inventions, providing expert approaches to Firmware Engineering and DSP Engineering applications. Due to the varied nature of the work, we ideally seek someone with knowledge of FPGA, DSP design and engineering, DSP Modelling, and design using embedded systems. Not all of these areas are required, but having experience in as many as possible in your past roles as a Firmware Engineer or DSP Engineer would be advantageous. Specific experience working on high-speed electronic systems would be ideal but is not essential. If you have previously worked in a security-cleared environment, it would be fantastic, although not essential as they are open to candidates from different sectors. However, you must be able to obtain security clearance. This usually means being a British Citizen or residing in the UK for five years in continuous employment. If you already hold security clearance from another source, this would be acceptable. You are going to work on some extremely interesting projects that will help you continually develop your career. Apart from this, you will receive an excellent starting salary and a benefits package in line with the parent company, along with continuous career training for future progression. We are looking for someone to start as soon as possible, so if you are interested, we recommend making an application now to avoid missing out. However, we understand you may have a long notice period, which can be normal in this sector. Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.