Trabajos security part time en DerbyCrear alertas

As a Streetworks Coordinator, you will support both the Operations Support Manager and the Operations Team, providing support to ensure that the company’s work is effectively programmed meeting our clients SLA’s and customers’ expectations. • Start and Stop work in accordance with SLA and permits, • Understand the works system and work to the processes accordingly – Training will be given, • Maintain timely and accurate input and uploading of information into the works management systems, ensuring that all issues are recorded and escalated., • Be responsible for Streetworks performance and driving continual improvements with the Operational teams, • Validate and transmit notice/permit requests in a timely manner, • Open and close off Streetworks notices/permits, submit final registrations, identify street works issues and apply early intervention and escalate street works compliance issues where appropriate, • Coordinate with other 3rd parties e.g. Parking suspensions, bus stop suspensions, road closures etc, • Analyse and respond to Section 74 charges & fixed penalty offences, • Run and circulate daily jeopardy reports as required, • Monitor and chase any outstanding issues, • Provide general admin support, • Be part of a call desk, • Provide a positive and innovative input into the team, through provision of solutions to problems and embracing change, • Ensure that safety issues are reported in line with Company procedures Experience and Qualifications, • Ideally you will have experience working in Utilities previously, • Experience in a planning / coordinator role, • Ability to prioritise workload, multi-task and work under tight time pressures, • Excellent communication skills, • High attention to detail, • Logical mind We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

Job description Grounds Maintenance Contract Supervisor Derby Full Time Annualised Hours £30000 to £35000 Per Annum Are you a leader? Are you proactive? Do you enjoy working as part of a team? If you identify with the above, this role was made for you! At Glendale, we have a great new opportunity for a Contract Supervisor to look after the smooth running of Operations and field teams to deliver a high standard of quality to our Commercial clients. And most importantly, you will be joining a company that can offer valuable career prospects and believes in investing in its people. Who are we? Glendale, a winner of BALI Employer of the Year, has revenues of £65 million. Winner of the 2025 Supreme Award and 2025 Pro Landscaper Business Award Grounds Maintenance Company of the Year. Glendale is one of the largest green space management service providers in the UK and specialises in tree care and management, grounds maintenance and landscaping. For more information visit . We are a green business with “green thinking” at the core of everything we do. We have been at the forefront of green services provision since 1989 and offer innovative solutions for the management and maintenance of the green environment. Who are you? • The successful candidate will have a demonstrable track record of leading staff and field teams., • Good time management skills and the ability to work in a demanding environment., • Enthusiasm, strong leadership, and great communication skills., • The ideal candidate will be flexible in style and thinking with an open, friendly personality., • They will understand and subscribe to the importance of working as a team., • Good IT skills are essential as well as a driving licence., • Previous experience in estimating work and delivering innovative customer solutions would be an advantage. A Glimpse into the Role awaiting You • Assisting the Contract Manager in the effective management of the programmed maintenance., • Oversee the programme of works and delivery through the Glendale Live field management system., • Motivate and support delivery teams across a wide geographical area., • Monitoring staff timekeeping, holidays and sickness., • Proactively leading by example, especially in QHSE requirements., • Maintenance and enforcement of security of vehicle, plant and equipment., • Enforcement of the quality and customer care ethics through the workforce and maintain workforce discipline, • To complete and manage necessary daily checks sheets and systems involved with the smooth running of operations., • You will be provided with a company vehicle for visiting all our contracts across the region. What can Glendale offer you? • Competitive salary, • Incremental annual leave, • Access to BenefitHub our employee discount portal - discounts on travel bookings, high street & supermarket shops, gift cards, cinema tickets, days out, leisure activities and help with your day to day spending, • Free gym membership for you and a nominated person, • Employee health cash plan, • Pension Scheme, • Company sick pay, • Career progression, • Training and development Follow us on Twitter @GlendaleUK We are proud to be Equal Opportunity employers and are committed to inclusion and diversity If you are interested in applying for this role, we suggest that you do so at the earliest opportunity to avoid disappointment as interviews will be held throughout the process. Please note that if you have not received correspondence within 21 days then please assume your application has been unsuccessful on this occasion.

Job Description Senior Chemical Process Engineer Full-Time / Hybrid Derby, Raynesway We are looking for capable, experienced and proactive individuals to join our growing team and be responsible for leading chemical process engineering packages. These are high-impact roles, ideal for experienced engineers who thrive on technical complexity, process rigour and innovation with purpose. This is an opportunity use your deep experience in chemical engineering to play a part in the Regeneration of the Raynesway Nuclear Licenced Site. This once in a lifetime major infrastructure programme is replacing the current facilities with modern state of the art manufacturing capability. You will be working across multiple projects and lifecycle stages in order to ensure that the areas under your responsibility meet both our engineering and project requirements. You will be able to interact with various stakeholders both internal and external to the business in order to be successful. You will be supported by a community of around 3,000 engineers in the Submarines business with training and development to allow you to build your skills and thrive in-role. The role will be based in Derby but with opportunities for hybrid working. Although experience of working with nuclear facilities is certainly advantageous, we invite applications from those that are interested in redeploying their existing capabilities in a new area. What is most important is having the right approach; you need to be someone who can work with and influence engineers from other disciplines so that chemical engineering is an integral part of the overall engineering solution. What you will be doing Act as 'Intelligent Customer' for chemical engineering aspects of design and construction. These aspects include process design; P&IDs; mass & energy balances; hazard studies; sizing, pressure and flow calculations.Ensure that principles of inherent safety, hierarchy of controls and simplification are embedded into the design.Lead the development of requirements and design options for chemical engineering packages. Provide assurance that requirements have been appropriately incorporated into design and construction.Ensure that chemical engineering within the project is carried out in accordance with required engineering and project processes. Review and acceptance of chemical engineering documentation and drawings produced by the external supply chain.Provide input to the production of engineering processes, plans and strategies. Production of applicable aspects of safety and environmental documentation. Implement engineering controls on chemical process engineering work carried out internally and in the external supply chain.Ensuring that chemical process systems are adequately commissioned and decommissioned.To support the Engineering Manager in ensuring that Suitably Qualified and Experienced Persons (SQEP) both internally and in the external supply chain are performing chemical engineering work.Provide technical authority, mentorship and review input for junior engineers and cross-functional design teams. Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Chemical/Process Engineering degree or similar relevant discipline, although experience and capability will be taken into consideration. Experienced in the design, construction and operation of nuclear and/or conventional facilities and infrastructure within the UK ideally including experience of undertaking and assessing design of facilities. Familiarity with Nuclear Site Licensing Conditions, Safety Assessment Principles (SAPs) and Technical Assessment Guides (TAGs) is advantageous.Experience of working on COMAH or similar high hazard sites. Knowledge of Process Safety tools and techniquesUnderstanding of modern control principles relating to chemical processesExperience and knowledge of nuclear safety case production. Familiarity with applicable regulations, codes and standards.You will also be a Chartered Engineer or hold an affiliate/associate membership of a relevant professional body and be working towards Chartered/Incorporated status. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Job Category Transformation & Operations Posting Date 11 Jul 2025; 00:07 Posting End Date PandoLogic. Keywords: Process Engineer, Location: Derby, ENG - DE23 8NX

Job Description Manufacturing Systems Integration Specialist (Automation) Derby/ Hybrid Full Time An exciting opportunity has arisen for a Manufacturing Systems Integration Specialist, based out of Derby but with global accountability. At Rolls-Royce, we are developing our current adoption and future strategic requirements for integrated digital and physical solutions which include extending the use of appropriate automation in the business. This role will play a pivotal part in shaping this strategy and setting the standards and policies to ensure that current and future Cyber-Physical Systems are compliant from a safety, cyber-security and business outcome standpoint Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future, and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing: In this exciting role of Manufacturing Systems Integration Specialist, you will lead the capability for Rolls-Royce by: Developing and maintaining the Cyber-Physical Systems policies and standards, ensuring they support the organisation's business objectives and external regulatory requirements.Setting Manufacturing Engineering Technology Strategy - Act as Level 2 curator for Manufacturing and Digital capabilities - developing and aligning strategic roadmaps, tech-bricks/programme definition and associated funding bids to ensure strategic alignment and delivery.Establish and lead the relationship with strategic procurement with a view to technically approving and supporting relevant schemes, working towards a future model of strategic supplier relationships including Integration supplier selection.Collaborate with business leaders, relevant Process Specialists, and IT teams to identify and prioritise data & systems initiatives that drive business value.Act as a mentor for engineers involved in the community integration of manufacturing automation and IT systems and ensure that there is adequate pipeline of talent, including specific development of individuals, succession planning and professional growthManage our collective associated knowledge, standards and best practice in a globally accessible environment including the relevant training solutions.External representation to share and seek knowledge to drive improvements in Cyber-Physical capabilities and applications.Act as ambassador for the function in the relevant technology development processes such as C2, TRL, DMIP, PILM and IPPR/PPAP environments. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Proven experience in developing and implementing Cyber-Physical Systems.Working knowledge of the application of physical automation solutions across a breadth of process applications (e.g. Process automation, Machine Tending, Handling, Mechatroncs...)Knowledge of Manufacturing Operations Management (MoM) systems and integration techniquesKnowledge of data governance, data quality management, and data integration techniques.Knowledge of process control authoring and validation systems such as Robot and Novel programming methodsFamiliarity with OT/IT technologies such as CNC/PLC, Systems architectures, field bus communication,Familiarity with Cyber Security risks and mitigation techniques in automation systemsA passion for creating symbiotic capabilities that provide safe and rewarding production workplaces (e.g. Human Factors, safety systems, environmental compliance)Excellent leadership, communication, and interpersonal skills.Ability to think strategically and solve complex problems.Working knowledge of TOGAF, or similar frameworks is a plus. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. We welcome applications from people with a refugee background. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce Job Category Manufacturing Engineering Posting Date 29 Aug 2025; 00:08 Posting End Date 04 Sept 2025PandoLogic. Keywords: Manufacturing Technician, Location: Derby, ENG - DE23 8NX

Job Description Dynamics Engineer- Submarines Full Time Derby / onsite We are currently looking for talented Engineers to join the Dynamics Group in Rolls-Royce Submarines. As an engineer in the Dynamics Group, you will be engaging primarily in structural assessments relating to impact, seismic, shock and vibration scenarios for all components within the steam raising plant. We also assess a wide range of on-board and shore-based plant support equipment and radioactive material transport containers. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. Why Rolls-Royce? Rolls-Royce Submarines is a leader in propulsion systems design and development for the Royal Navy's nuclear submarine fleet. They are the sole provider and technical authority for the Nuclear Steam Raising Plant, managing all aspects of plant design, safety, manufacture, performance and through-life support. Powering the submarines of today and building solutions for tomorrow has never been more important. We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. What we offer: Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. We offer excellent development, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you'll be doing: In this role you will: Undertaking a broad range of mechanical assessments, including linear, non-linear and dynamic finite element analyses.Making use of traditional hand calculation methods, commercial finite element codes and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and, in many cases, pursue regulatory approval for current class, in-build and future class submarines.Development and implementation of methodologies to assess components, along with the definition of testing programmes to underwrite those methods.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest in dynamic analysis and test. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of dynamics and non-linear events.Experience generating and working with finite element models, using industry standard tools such as LS-DYNA, Abaqus, ANSYS, HyperMesh and the Oasys suite.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements.Experience of working as part of a multi-disciplinary design team; particularly where concurrent engineering methods have been used.Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic. Keywords: Marine Engineer, Location: Derby, ENG - DE23 8NX

Job Description Systems Engineering and Verification Opportunities - Submarines Full Time / Part Time 5 Days On-Site - Hybrid working may be agreed. Derby An exciting opportunity has arisen for Systems & Verifications Engineers to join Rolls-Royce Submarines. Our Systems Engineering and Verification Engineers are responsible for ensuring oversight of our products to meet business, customer and regulatory requirements. This is an integration role where you will work to enable all engineering teams through coaching and support to successfully develop robust, verified engineering solutions against robust validated customer requirements. Why Rolls-Royce? At Rolls-Royce Submarines we support the Royal Navy as the technical authority to the UK Ministry of Defence for naval reactor plants. We are also growing our submarine and nuclear sector capabilities. Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning and access to an incredible breadth and depth of opportunities to grow your career. What we offer: We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you'll be doing: You will interface between external and internal customers, to elicit and validate all stakeholder requirements; including business, technical customers and partners. Set the Systems Engineering and Verification approach for an Engineering Programme through the relevant management plans.Ensure sufficient rigor is put into requirements validation and verification, to remove technical risk.Develop product verification strategy, structured verification plan and Product Development Plan.Manage the creation of substantiation evidence, clearance/acceptance documentation that meets the demand for the project.Be the point of contact within the project to support and coach the team regarding Systems Engineering, Validation and Verification activities, driving the right V&V behaviours within the project. Who we are looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles Degree level in Engineering or equivalent.Have a strong understanding of Systems Engineering.Experience in the Nuclear industry is preferred but not essential.Experience of working with relevant SE software applications eg DOORS / CAMEOGood communication, presentation skills and an ability to work in a multidisciplinary environment.Have a strong delivery record with an understanding of programme management. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Validation and Verification Posting Date 27 Jun 2025; 00:06 Posting End Date PandoLogic. Keywords: Verification Engineer, Location: Derby, ENG - DE23 8NX

Job Description Structural Integrity Engineer (FEA) - Submarines Full Time 5 Days On-Site Derby We have an interesting opportunity for two Structural Integrity Engineers to join our new office opening in Cardiff. As a structural integrity engineer, you will be engaging primarily in structural integrity assessments including primary strength, fatigue, fatigue crack growth and fracture assessments, in accordance with ASME III and R6 defect tolerance assessment code. You will be supporting a wide range of programmes from in-service support, new build, and future programmes. You will also be building and maintaining Finite Element Analyses (FEA) models to extract stresses to be used in the justification of the components. Why Rolls-Royce? Our Submarines business is currently expanding and opening a new Office based in Cardiff in which we are looking for Engineers across multiple engineering disciplines. As part of this we are looking for a number of people with a strong background within Materials Engineering. As we continue to support the Royal Navy as the technical authority to the UK Ministry of Defence for naval reactor plants, we're also growing our submarine and nuclear sector capabilities. Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. What we offer: We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts. The work is interesting and varied; there will be situations in which you will be relied upon to respond rapidly to emergent challenges, providing a vital and valued service to the Submarines enterprise. What you will be doing: You will be undertaking a broad range of mechanical assessments, including linear, non-linear finite element analyses. Making use of traditional hand calculation methods, commercial finite element codes (mainly Abaqus) and bespoke analysis codes.Using assessment work to develop and substantiate component designs, inform through-life management and supporting submarine enterprise.Development and implementation of methodologies to assess submarine nuclear plant components.Relaying the method and outcome of assessments, clearly and efficiently, to a range of audiences at all seniorities within Rolls-Royce, industry partners and customer organisations. Who we are looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Essential: Qualified to degree level, or with equivalent experience, in mechanical engineering, physics or mathematics.Able to prioritise tasks and work effectively on multiple projects at the same time.Demonstrate interest and expertise in structural integrity analysis. Desirable: Good all-round knowledge of the fundamental failure mechanisms and the methods used to assess against them.Practical experience of using finite element methods (preferably Abaqus) for structural component assessment, along with experience of providing support to manufacturing engineers, designers and safety case authors.Good working knowledge of linear and non-linear events.Experience generating and working with finite element models, using industry standard tools such as Abaqus, ANSYS, HyperMesh.Experience of working in an industry where safety is a priority and in which components are justified to safety cases and/or design code requirements. (ASME III, R6)Membership, or Associate Membership, of a relevant professional institution and working toward chartership. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Mechanical Systems Posting Date 19 Jun 2025; 00:06 Posting End Date PandoLogic. Keywords: Marine Engineer, Location: Derby, ENG - DE23 8NX

Job Description Job Title: Manufacturing Engineer - CAD - (Submarines) Working Pattern: Full time Working location: Derby (Raynesway We have an exciting opportunity for a CAE CAD Manufacturing Engineer to join our Submarines function within the NBC OBU based at Raynesway, Derby. As a CAE CAD Manufacturing Engineer, you will be able to operate as part of a cross-functional team to ensure all technical aspects of manufacturing processes are understood to deliver the required design intent. You will be responsible for creating production drawings for highly complex components working and integrating with Design, Manufacturing Engineering, Inspection and Production. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you will be doing: With this exciting opportunity you will get a chance to be involved with the following: Prepare, develop, and maintain the master model, definition drawing and relevant documentation in accordance with company procedures, engineering drawing standards, design intent (fit, form, function), manufacturing & build capability. Creation of 3D CAD models and 2D drafting of production drawings using Siemens NX. Responsible for translation of design ideas into production engineering drawings. Producing, modifying, and reviewing engineering drawings using Siemens NX. Creation of Manufacturing Process Models in Siemens NX. Work with the Manufacturing Engineering stakeholders to deliver programme and Method of Manufacture improvements, which will encompass technical continuous improvement opportunities with Operations to improve manufacturing process capability. Produce tolerance stack-ups to aid new product creation & validation. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. To be successful in this role you will need to meet the following criteria: Ideally, you will be a Professionally Qualified Engineer (e.g. UK minimum HND/foundation degree or other national equivalent) or relevant time served experience. Proficient in use of Teamcenter, PLM, Siemens NX v7.5 or above, similar levels of experience in other CAD software will also be considered. Have appropriate engineering experience in conceptual and detail drafting techniques with a good understanding of manufacturing techniques. Previous experience using CAD packages to perform design of jigs, fixtures and tooling would be desirable. Knowledge of Geometric Dimensioning and Tolerancing (GD&T) and Y14.5M drawing standards would be desirable. It is desirable to have a recognised national or international engineering accreditation (e.g. UK IEng or CEng) where available. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for Rolls-Royce Submarines, you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Manufacturing Engineering Posting Date 29 Aug 2025; 00:08 Posting End Date 12 Sept 2025PandoLogic. Keywords: Manufacturing Engineer, Location: Derby, ENG - DE23 8NX

Job Description Senior Project Design Engineer - Submarines Derby Full Time/ On-site We have an exciting opportunity for a Senior Project Design Engineer to join Rolls-Royce Submarines in Derby. So, if you are a Senior Design Engineer or Project Design Engineer, who is passionate about engineering, can demonstrate mechanical design experience from concept to delivery and believe you can make a difference in our Submarines business, we want to hear from you now, so apply online. What we offer We offer excellent development, a competitive salary and exceptional employee benefits. What you will be doing: As a Senior Mechanical Design Engineer you will be creating component / assembly / systems designs and associated through-life justification that meet their requirements and product attributes of life, cost, availability, and safety margins. Creating Full Life Cycle Design solutions through concept, design, manufacture, operation and disposalIntegrating cross-discipline engineering concepts, collaborating across manufacturing engineering, simulation, materials, testing, and supply chain functions.Documenting and verifying information against sound mechanical engineering practices and references.Presenting at technical reviews in front of peers and expert panels.Publishing safety and technical reports which are subjected to customer and regulatory scrutiny Who we're looking for: Being a part of Rolls-Royce you'll know we put safety first, do the right thing, keep it simple and make a difference. These principles form our behaviours. They are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Experienced Mechanical Design Engineer preferably with exposure to process plant, mechanical components, machining, tooling, handling and lifting , special purpose machinery, pressure vessels, boilers or assembly processes CAD Design Software experienceExternal Skills/Experience can be from industries such as Civil Nuclear, Marine, Petro-Chemical, Oil & Gas, Special Purpose MachineryEngineering Qualification or relevant experience (Chartered/Degree/HND/HNC/Apprentice Trained) Why Rolls-Royce? We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. Design and Development Engineering is at the heart of what we do and we are the leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national Job Category Mechanical Systems Posting Date 01 Sept 2025; 00:09 Posting End Date 07 Sept 2025PandoLogic. Keywords: Marine Engineer, Location: Derby, ENG - DE23 8NX

Job Description Chemical Process Engineer Full-Time / Hybrid Derby, Raynesway We are looking for capable, experienced and proactive individuals to join our growing team and be responsible for leading chemical process engineering packages. These are high-impact roles, ideal for experienced engineers who thrive on technical complexity, process rigour and innovation with purpose. This is an opportunity use your deep experience in chemical engineering to play a part in the Regeneration of the Raynesway Nuclear Licenced Site. This once in a lifetime major infrastructure programme is replacing the current facilities with modern state of the art manufacturing capability. You will be working across multiple projects and lifecycle stages in order to ensure that the areas under your responsibility meet both our engineering and project requirements. You will be able to interact with various stakeholders both internal and external to the business in order to be successful. You will be supported by a community of around 3,000 engineers in the Submarines business with training and development to allow you to build your skills and thrive in-role. The role will be based in Derby but with opportunities for hybrid working. Although experience of working with nuclear facilities is certainly advantageous, we invite applications from those that are interested in redeploying their existing capabilities in a new area. What is most important is having the right approach; you need to be someone who can work with and influence engineers from other disciplines so that chemical engineering is an integral part of the overall engineering solution. What you will be doing Act as 'Intelligent Customer' for chemical engineering aspects of design and construction. These aspects include process design; P&IDs; mass & energy balances; hazard studies; sizing, pressure and flow calculations.Ensure that principles of inherent safety, hierarchy of controls and simplification are embedded into the design.Lead the development of requirements and design options for chemical engineering packages. Provide assurance that requirements have been appropriately incorporated into design and construction.Ensure that chemical engineering within the project is carried out in accordance with required engineering and project processes. Review and acceptance of chemical engineering documentation and drawings produced by the external supply chain.Provide input to the production of engineering processes, plans and strategies. Production of applicable aspects of safety and environmental documentation. Implement engineering controls on chemical process engineering work carried out internally and in the external supply chain.Ensuring that chemical process systems are adequately commissioned and decommissioned.To support the Engineering Manager in ensuring that Suitably Qualified and Experienced Persons (SQEP) both internally and in the external supply chain are performing chemical engineering work.Provide technical authority, mentorship and review input for junior engineers and cross-functional design teams. Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Chemical/Process Engineering degree or similar relevant discipline, although experience and capability will be taken into consideration. Experienced in the design, construction and operation of nuclear and/or conventional facilities and infrastructure within the UK ideally including experience of undertaking and assessing design of facilities. Familiarity with Nuclear Site Licensing Conditions, Safety Assessment Principles (SAPs) and Technical Assessment Guides (TAGs) is advantageous.Experience of working on COMAH or similar high hazard sites. Knowledge of Process Safety tools and techniquesUnderstanding of modern control principles relating to chemical processesExperience and knowledge of nuclear safety case production. Familiarity with applicable regulations, codes and standards.You will also be a Chartered Engineer or hold an affiliate/associate membership of a relevant professional body and be working towards Chartered/Incorporated status. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Job Category Transformation & Operations Posting Date 04 Aug 2025; 00:08 Posting End Date PandoLogic. Keywords: Process Engineer, Location: Derby, ENG - DE23 8NX

Job Description Electrical Design Engineer - Submarines Full Time Derby We have an exciting opportunity for an Electrical Design Engineer to join Rolls-Royce Submarines. As the Electrical Design Engineer you will work as part of a team consisting of mechanical, systems and EC&I engineers utilising support from other functions around the Submarines Business. This is an exciting time to join what is a growing part of the Submarines business. Electrical Design Engineers with experience of designing safety critical bespoke capital equipment, machinery or process equipment would be ideally suited to this role. As the Electrical Design Engineer you will be supporting design from development through the whole lifecycle. Why Rolls-Royce? We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing: As the Electrical Design Engineer you will be involved with incredibly fast paced projects with delivery dates which are very challenging.Undertake or support all design tasks from scoping and blank page design to authoring substantiation and safety documentation and supporting procurement through the manufacture, test and supply of componentsProduction of technical reports/operating manuals etc. to a high standard.Responsible for delivery to cost, specification and programme.Work closely with the project engineer and multi-discipline teams to develop detailed plans and estimates to meet business objectives. Who we're looking for: Electrical Design experience from scoping to delivery in a complex manufacturing or engineering environment is essential for this role so applicants with experience in Defence, Nuclear, Oil and Gas, Capital Equipment, Machine Manufacturers, Process Plant (Chemical ,Drinks, Refinery ), Rail or Aerospace would provide a good match to this role Electrical Design experience with bespoke safety critical products Project or Technical Co-ordinator experience in a service / engineering or manufacturing environment.Electrical controls and instrumentation design experience, and an understanding of electrical design principles.A good understanding of a design process from scoping to delivery.Must have a degree in a relevant engineering discipline or equivalent level of continuous professional development and experience.Ideally have experience of design work related to a submarine NSRP. At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Job Category Electrical and Electronics Posting Date 29 Aug 2025; 00:08 Posting End Date 12 Sept 2025PandoLogic. Keywords: Electrical Engineer, Location: Derby, ENG - DE23 8NX

Job Description Nuclear - System Design & Integration - Submarines Full Time / Part Time 5 Days On-Site - Hybrid working may be agreed. Opportunity in Derby Rolls-Royce are looking for a people with a strong background in Systems Design & Intergration to join the team in Derby. Our Systems Design Integration engineers, are responsible for problem resolution, defining requirements and designing and integrating products & systems. They perform concept level technical analysis to verify potential solutions. Why Rolls-Royce? At Rolls-Royce Submarines we support the Royal Navy as the technical authority to the UK Ministry of Defence for naval reactor plants. We are also growing our submarine and nuclear sector capabilities. Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning and access to an incredible breadth and depth of opportunities to grow your career. What we offer: We offer excellent development, a competitive salary and exceptional benefits, including paid overtime, bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you'll be doing: Apply understanding of NSRP and wider Nuclear product operation, product systems, sub-systems and interactions. Integrate and manage interfaces.Design of systems using Systems Engineering principals including the use of Robust Design tools & techniques to achieve optimum solutions at product and sub-system level.Applying knowledge of the importance of determining, managing & flowing system level requirements.Planning and management of product change, design technical approval and technical investigations.Verifying that the system meets the requirements and ownership of standardisation reports. Good inter-personal and presentation skills. Ability to communicate with and influence all levels including the customer.Work with and co-ordinate extended (i.e. not necessarily co-located) multi-disciplinary teams. Who we are looking for: Bachelor's degree or master's in engineering or equivalent experienceStrong technical knowledge in mechanical design methodologies and have an understanding of cross-discipline engineering concepts which include but are not limited to manufacturing engineering, aerodynamics, thermodynamics, thermal and mechanical analysis, cost engineering and product definition.An ability to apply logical, analytical and innovative thinking on a range of technical problems and make balanced decisions across technical and business parametersGood communication, presentation skills and an ability to work in a multidisciplinary environment.Membership of a relevant professional body. We're an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Validation and Verification Posting Date 01 Jul 2025; 00:07 Posting End Date PandoLogic. Keywords: Nuclear Design Engineer, Location: Derby, ENG - DE23 8NX

Job Description Job title: Aerothermal, Combustion Thermofluids, Performance Engineer Working pattern: Full-time Location: Derby or Bristol/Hybrid An exciting opportunity has arisen for an Aerothermal Engineer to join the 'Fluid Mechanics - Aerothermal, Combustion, Thermofluids and Performance' function, at Rolls-Royce based in Derby or Bristol. This role is part of a high profile, fast paced and ambitious engineering challenge. What we are striving to achieve requires innovative thinking, creative problem solving, clarity of purpose and a willingness to demonstrate leadership at the highest level. Our engineering leadership is supportive, team oriented, focused and equipped with a range of engineering disciplines; we anticipate you adding another pillar to an already formidable capability. As an Aerothermal Engineer, you will be responsible for and have knowledge in problem resolution, defining requirements, analysing test data, aerothermal and thermodynamic modelling of components and systems to facilitate component and engine design. In addition, responsibilities include methods development, rig test support, verifying products, and supporting physical & functional systems and components throughout the product lifecycle. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing In the role, you will be accountable for:Using in-house computational tools and methods to derive understanding of component and system level interactions to develop and maintain a functional understanding of the engine and understand interactions in combustion and high temperature environments.Requirement setting for rig activities, and subsequent monitoring and analysis of rig test measurements and results. Occasional running and supporting of low and high technology level tests. Developing methods with view to facilitating robust test vehicle design, including flight test.Defining creative, robust, optimised, solutions managing risk and applying new technology as appropriate to deliver quality within highly regulated industries. Supporting validation and verification activities. Who we are looking for At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Bachelor's degree or Masters in Engineering or regional equivalent qualification, or equivalent experience. Strong technical knowledge in Aerothermal methodologies and have an understanding of cross-discipline engineering concepts and there impacts on system/platform design. An ability to apply logical, analytical and innovative thinking on a range of technical problems and make balanced decisions across technical and business parameters. Membership of a relevant professional body appropriate to region. In the UK - attained/ working towards Chartered status is preferred (and equivalent regional variations). Good communication and presentation skills at all levels of the organisation. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. We welcome applications from people with a refugee background. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce Job Category Mechanical Systems Posting Date 29 Aug 2025; 00:08 Posting End Date 27 Nov 2025PandoLogic. Keywords: Combustion Engineer, Location: Derby, ENG - DE23 8NX

Job Description Manufacturing Engineer - New Product Introduction - Submarines Full Time Derby An exciting opportunity for a New Product Introduction Manufacturing Engineer role has arisen within Rolls Royce Submarines. Why Rolls-Royce? Our submarines business is responsible for the design, manufacture, supply and through-life support of nuclear propulsion-related products and systems in support of the Royal Navy's submarine fleet. You can find out more about the amazing projects that we are working on here:- We're a leader in propulsion system design and development for the Royal Navy's nuclear submarine fleet and the sole provider and technical authority. Join us and we'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. Rolls-Royce Submarines are looking to recruit a group of self-motivated Manufacturing Engineers who enjoy learning new skills, have a positive approach and enjoy resolving a wide range of challenges that a Manufacturing Engineer can face. As part of the Engineering Producibility Team, a Manufacturing Engineer is expected to influence new designs using New Product Introduction tools to ensure manufacturability and continually improve upon existing product designs, then translating these into world class processes which meet business and customer requirements for Safety, Quality, Cost & Delivery. What we offer: We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. Within this exciting opportunity you will get a chance to have an input into the development of manufacturing processes and/or methods of manufacture and the continuous improvement of these areas. What you will be doing: The product and materials are somewhat novel when compared to other vessel fabrications, pumps, valves and assemblies for a Pressurised circuit. The optimal candidate would: You will execute Manufacturing Product Introduction activities, including the design of the overall Method of Manufacture and of individual process steps using the Product Quality Planning toolsetFundamental knowledge of DFMEA / PFMEA to influence Product definition / final form manufactureYou will create and validate Production Technical Instructions which are capable of delivering design intent and meeting customer and business requirements for safety, quality, cost, delivery rate & leadtime (SQCD).You will be accountable for being the manufacturing technical authority for the product and the management of First offs, new part numbers, significant method resequencing and introduction of new toolingYou will act as the primary Manufacturing Engineering representative within a cross-functional team for their owned part(s) Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours, are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Experience of any of fabrications, valves, complex assemblies, machining and of critical classified components.You will have a degree, or equivalent, in an engineering or related technical discipline with previous experience in a manufacturing engineering and/or process engineering backgroundYou will have strong analytical skills and a proven record of technical problem-solving skills along with knowledge of six sigma / lean techniquesYou will be a good communicator and able to liaise with all levels of staffYou will possess excellent organisational and presentation skills and feel comfortable presenting at all levels We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people | Rolls-Royce To work for Rolls-Royce Submarines you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Manufacturing Engineering Posting Date 03 Jul 2025; 00:07 Posting End Date PandoLogic. Keywords: Manufacturing Engineer, Location: Derby, ENG - DE23 8NX

Doors and Shutters Engineer – Up to £45,000 basic + Door to Door travel + Bonus Scheme Location: Derby Area Salary: Up to £45,000 basic (DOE) OTE: With travel time, Call-Out and Overtime Industry: Automation industry ABOUT Our client, with over 40 years of experience, is seeking skilled Door & Shutter Engineers to join their expanding team, following the award of new projects and contracts across the UK's private sector. NSI Gold and BAFE approved, the company offers the opportunity to work alongside top engineers on leading systems at major client sites. Benefits – Doors and Shutters Engineer: Competitive salary: £35,000 – £45,000 (depending on experience) Performance-based bonus scheme Paid travel time (after 30 minutes) Company vehicle with personal use Comprehensive healthcare scheme Responsibilities – Door and Shutters Engineer: As a Doors and Shutters Engineer, your role will include: Work as part of a nationwide team of 20+ engineers Perform preventative and reactive maintenance across 500+ sites and 2,500+ assets Ensure all systems are fully functional, safe, and compliant Carry out recommended upgrades for clients Maintain and service Automatic Doors, Shutters, and Gates on client premises Requirements - Doors and Shutters Engineer: Minimum 3 years' hands-on experience with Automatic Doors, Shutters, and Gates Experience in preventative and reactive maintenance of these systems ADSA accreditation is essential DHF qualification is desirable Full UK driving license Why Join? If you're a local engineer with experience in automation, this is an exciting opportunity to work across diverse sites, enhance your skills, and grow within a reputable company. Apply Now! If you're an experienced Doors and Shutters Engineer based in or near Derby, this is your chance to join a respected company offering real work-life balance, strong earning potential, and professional development. Keywords to support your application: Automation Engineer | Door and Shutters Engineer | Security | Gates and Barriers | Door Engineer | Service Engineer TPBN1_UKTJ

Trainee Cyber Security Course Programme Job Guarantee Included.Complete online training designed to take you from zero experience to your first Cyber Security role.Study part-time, build fundamental skills, and get dedicated job placement support until you're hired.Flexible financing options ava

Company Description At Turner & Townsend we’re passionate about making the difference. That means delivering better outcomes for our clients, helping our people to realize their potential, and doing our part to create a prosperous society. Every day we help our major global clients deliver ambitious and highly technical projects, in over 130 countries worldwide. Our team is dynamic, innovative and client-focused, supported by an inclusive and fun company culture. Our clients value our proactive approach, depth of expertise, integrity and the quality we deliver. As a result our people get to enjoy working on some of the most exciting projects in the world. Job Description Senior Cost Manager / Senior Quantity Surveyor Location: Midlands with travel opportunities Join the Future of Infrastructure with Turner & Townsend. Are you ready to elevate your career by working on high-impact infrastructure projects that shape the world around us? At Turner & Townsend, we’re seeking ambitious Senior Quantity Surveyors / Senior Cost Managers to join our thriving Midlands team. This is your opportunity to play a key role in delivering some of the UK’s most significant and forward-thinking infrastructure programmes across airports, utilities, transport, and more. Why Join Us? • Be Part of Something Big - Work on UK wide, high-profile projects that challenge the norm and redefine what’s possible in infrastructure., • Be Recognised- Your contributions won’t go unnoticed, and we celebrate input, initiative, and achievement., • Variety & Flexibility - Whether embedded with clients or supporting multiple programmes, no two days are the same., • Career Development - Access world-class training and mentoring to support your journey toward chartership and beyond., • Innovate & Lead - Use cutting-edge cost management tools and shape best practices across the sector., • Manage commercial contracts, procurement, and negotiations in an NEC environment., • Lead post-contract commercial activities, including payment approvals, cost assessments, and contract changes., • Support contractors in keeping everything transparent and data-driven., • Identify cost-saving strategies and optimize contract performance., • Support key decision-making with data-driven cost management insights., • The individual will be an integral part of a team that is accountable for the commercial and contractual performance of a project, • To support business objectives of delivering value for money in all circumstances, • To carry out assigned duties efficiently and in accordance with processes and procedures, • Comply with established commercial/procurement/ contractual strategies, • Take personal responsibility for complying with Environmental, Health, Safety, Security and Quality Standards, • Individually or as part of a team operate processes for the selection, appointment and management of construction and engineering contractors, • Procurement including: providing advice on procurement strategy, assembling and seeking agreement to long and short tender lists. Preparing and issuing tender documents. Running a competitive tender process including managing queries from tendering contractors. Managing and contributing to documented tender evaluations., • Scrutinising and verifying applications for interim payments, • Preparing certificates, • Managing change control in accordance with contracts, • Producing cost reports and cost forecasting, • Assisting Project Managers in preparing Early Warnings, Instructions and Compensation Events, • Attending progress meetings, • Promote commercial awareness throughout project What We’re Looking For: • Proven expertise in quantity surveying, procurement, and/or estimating, ideally on large-scale infrastructure projects., • Degree-qualified, with chartered status (MRICS) or actively working towards it., • Strong knowledge of NEC contracts and infrastructure cost management., • A collaborative, proactive approach — we value clear communicators and adaptable thinkers., • Ability to balance site travel with flexible, balanced working. If you’re looking to join a global consultancy where you can grow your career, contribute to legacy projects, and work with some of the brightest minds in the industry, we’d love to hear from you. Apply now and let’s shape the future of infrastructure together. Additional Information Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at SOX control responsibilities may be part of this role, which are to be adhered to where applicable. Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Trainee Cyber Security Course Programme Job Guarantee Included Complete online training designed to take you from zero experience to your first Cyber Security role.Study part-time, build fundamental skills, and get dedicated job placement support until youre hired.Flexible fi

Trainee Cyber Security Course Programme Job Guarantee Included Complete online training designed to take you from zero experience to your first Cyber Security role. Study part-time, build fundamental skills, and get dedicated job placement support until youre hired. Flexible financing options available, with payment plans starting from as low as 142 per month. The Programme Complete this 8-10 week online training with just 2 hours per day of study time. You will learn industry-recognised methodologies, network security, threat detection, vulnerability management, and incident response, while building practical experience with Live Labs. The programme includes earning CompTIA certifications (A+, Network+, Security+) recognised by UK employers, expert tutor support throughout your studies, dedicated job placement support with CV rewrite, interview preparation, and access to exclusive job opportunities. The Outcome 93% of graduates secure cyber security roles within 3 months. Starting salaries: 28,000 38,000+ Who This Is For The programme is completely beginner-friendly, so no experience is needed. Career changers are welcome, and you can study at your own pace. *This programme is available to UK-based learners only. Ready to start earning in Cyber Security? Limited spaces available. Apply now for the next available cohort.

Home Based Opportunity with a leading UK Company UTILITY WAREHOUSE est. 2002 Part of the Telecom Plus group • Utilities are constantly rising., • Save money on essential services. This is a Self Employed Opportunity • Work around your existing job, • And fit around family commitments, • Potential earnings from £500-£3000 pcm, • Unlimited income potential for team builders Earnings are dependant upon the effort and time you put in. This is an opportunity to build for your financial security. To apply, you MUST be permitted to work in the UK, Minimum age 21 and not on a student VISA This is NOT a warehouse Job To find out more click APPLY NOW A company representative will call to explain and answer your questions with no obligation interested then click apply now.

Home Based Opportunity with a leading UK Company UTILITY WAREHOUSE est. 2002 Part of the Telecom Plus group • Utilities are constantly rising., • Save money on essential services. This is a Self Employed Opportunity • Work around your existing job, • And fit around family commitments, • Potential earnings from £500-£3000 pcm, • Unlimited income potential for team builders Earnings are dependant upon the effort and time you put in. This is an opportunity to build for your financial security. To apply, you MUST be permitted to work in the UK, Minimum age 21 and not on a student VISA This is NOT a warehouse Job To find out more click APPLY NOW A company representative will call to explain and answer your questions with no obligation interested then click apply now.

Home Based Opportunity with a leading UK Company UTILITY WAREHOUSE est. 2002 Part of the Telecom Plus group • Utilities are constantly rising., • Save money on essential services. This is a Self Employed Opportunity • Work around your existing job, • And fit around family commitments, • Potential earnings from £500-£3000 pcm, • Unlimited income potential for team builders Earnings are dependant upon the effort and time you put in. This is an opportunity to build for your financial security. To apply, you MUST be permitted to work in the UK, Minimum age 21 and not on a student VISA This is NOT a warehouse Job To find out more click APPLY NOW A company representative will call to explain and answer your questions with no obligation interested then click apply now.

Trainee Cyber Security Course Programme Job Guarantee Included Complete online training designed to take you from zero experience to your first Cyber Security role.Study part-time, build fundamental skills, and get dedicated job placement support until you're hired.Flexible financing options availa

To be compliant with Industry and Statutory Legislation (you are required to obtain a front-line licence in either Security Guarding or Door Supervision), which must be worn at all times whilst carrying out your duties. Part time - Thursday and Friday 17:00 to 21:30. Events SIA Security Officer, Gra

And as part of our close-knit team, you'll experience a culture that values respect, compassion, and a shared commitment to exceptional care.

Dealing with disturbances and emergency situations, following security and health and safety procedures at all times. PART TIME SIA DOOR SUPERVISORS REQUIRED – LANCASTER. Elite Security Service Providers Ltd are looking for experienced SIA Licensed Door Supervisors to work regular Friday and Satur

Assisting residents in all their personal hygiene care ensuring optimum independence, dignity and respect of individuals at all times. Recognising and understanding clinical risk areas in residents such as weight loss, pressure sores, risk of falls, sign of infections and escalate any identified ris

As a Care Assistant, you could be doing anything from supporting residents with their food and drink and following care plans to ensuring that each of our residents has one-to-one time.

And as part of our close-knit team, you'll experience a culture that values respect, compassion, and a shared commitment to exceptional care.

Are you someone who takes pride in creating safe, welcoming spaces for others? Do you want to be part of a supportive, professional team that helps schools thrive? If so, we’d love to hear from you. Team: Part of a wider Facilities team supporting schools across the Council area. If you want to ma

Discover an incredible chance to become a part of our network as a Delivery Associate/Driver, offering an immediate start right in your area. By partnering with DTT, you gain access to:. Swift Loading Times - Parcels pre-sorted, ready for your 15-minute loading (max).

As the first point of contact for almost everyone who comes to the home, you'll have a vitally important part to play in creating a positive and friendly environment.

Van insurance and rental included in the price and a Fleet system to contact at any time.

You will work enthusiastically as a member of a team that promotes and supports Adults with Support Needs to actively take part within local resources and facilities, to maximise their inclusion, independence and planned outcomes. You should have an understanding of the rights and responsibilities o

Swift Loading Times - Parcels pre-sorted, ready for your 15-minute loading (max). Discover an incredible chance to become a part of our network as a Delivery Associate/Driver, offering an immediate start right in your area. By partnering with DTT, you gain access to:.

You will work enthusiastically as a member of a team that promotes and supports Adults with Support Needs to actively take part within local resources and facilities, to maximise their inclusion, independence and planned outcomes. You should have an understanding of the rights and responsibilities o

You will be an enthusiastic individual and will work as part of a team responsible for cleaning and ensuring that council buildings are kept in a clean and hygienic condition. You should possess good communication skills, be able to work on your own or as part of a team and have a flexible approach

As a Bank Care Assistant, you could be doing anything from supporting residents with their food and drink and following care plans to ensuring that each of our residents has one-to-one time.

Whether youre looking for full-time or part-time hours, wed love to hear from you. Working Hours: 8:00am 6:00pm, Monday to Friday (Part-time or Full-time, 35 days per week).

This is your opportunity to be part of the world’s largest international airline.

Employment Type: Full-time or part-time available. Excellent time management and organisational skills. Its an opportunity to become part of a supportive team where your development matters just as much as the patient smiles we help create.

As a Care Assistant, you could be doing anything from supporting residents with their food and drink and following care plans to ensuring that each of our residents has one-to-one time.

We are seeking a motivated, friendly, team-oriented, and well-presented individual eager to learn on a full-time Trainee Dental Nurse to join our team.

As a Bank Care Assistant, you could be doing anything from supporting residents with their food and drink and following care plans to ensuring that each of our residents has one-to-one time.

RightTime Care are seeking Compassionate and Experienced Complex Care HCA's and Support Workers to provide high-quality, person-centred care to individuals with complex needs, including mental health conditions, learning disabilities, autism, acquired brain injuries, and challenging behaviours.

This is your opportunity to be part of the world’s largest international airline.

RightTime Care are seeking Compassionate and Experienced Complex Care HCA's and Support Workers to provide high-quality, person-centred care to individuals with complex needs, including mental health conditions, learning disabilities, autism, acquired brain injuries, and challenging behaviours.

Full Time & Part Time available. The client enjoys the cinema, visiting her local pub and garden centre and this year took part in the local Race for Life! The aim of the support worker team, under the guidance of the multidisciplinary team, is to provide care to all aspects of daily living, enhance