Trabajos field engineer en Louisville, KentuckyCrear alertas

Compensation Type: Yearly Highgate Hotels: Highgate is a leading real estate investment and hospitality management company with over $15 billion of assets under management and a global portfolio of more than 400 hotels spanning North America, Europe, the Caribbean, and Latin America. With a 30-year track record as an innovator in the hospitality industry, this forward-thinking company provides expert guidance through all stages of the property cycle, from planning and development through recapitalization or disposition. Highgate continues to demonstrate success in developing a diverse portfolio of bespoke lifestyle hotel brands, legacy brands, and independent hotels and resorts, featuring contemporary programming and digital acumen. The company utilizes industry-leading revenue management tools that efficiently identify and predict evolving market dynamics to drive outperformance and maximize asset value. With an executive team of seasoned hospitality leaders and corporate offices worldwide, Highgate is a trusted partner for top ownership groups and major hotel brands. _ Location: Residence Inn Louisville 120 N. Hurstbourne PkwyLouisville, KY 40222 Overview: The Chief Engineer is responsible for the day-to-day operations of the engineering division. In the absence of the Director, the assistant will assume the administrative, financial and operating aspects of the hotel as they relate to engineering. Responsibilities: • Assist in developing and implementing plans to maintain property, equipment, grounds and other assets in a safe and acceptable state of repair., • Ensure the hotel is in compliance with all local, state and federal laws., • Supervise and train all Engineering staff in Customer Service, Empowerment, Standard Operating Procedures and Loss Prevention., • Create and post all Engineering staffs schedules., • Create and adhere to annual budget for department., • Assist in developing financial forecasts and actively participate in monthly profit/loss review meetings., • Create and implement preventative maintenance program for all hotel equipment., • Ensure all emergency and life safety equipment and systems are inspected, tested and certified per Highgate Hotel standards., • Actively participate in energy conservation programs., • Review all guest and meeting planner comment cards to ensure problems are identified and corrected in a timely manner., • Ensure compliancewith the Americans with Disabilities Act (ADA)., • Assist with the administration of all vendor contracts controlled by the engineering department., • Ensure that room maintenance requests are handled in a prompt and courteous manner., • Follow up on all alarms immediately to determine the exact location and cause.Determine emergency status and report findings to Front Desk.Take immediate action as necessary., • Assist as necessary with special projects and renovations., • Support and participate in all Highgate Hotel programs., • Participate in Highgate Hotel Safety Committee. Qualifications:, • At least 3 years of progressive facilities management experience in a hotel or a related field; or a 2-year college degree and 1 year of related management experience., • High school diploma or equivalent required., • Stationary Engineer’s license if required by local code., • HVAC, electrical, plumbing, boiler operations and general maintenance skills required., • Long hours sometimes required., • Heavy work – Exerting up to 100 pounds of force occasionally, and /or 50 pounds of force frequently and/or up to 20 pounds of force constantly to lift, carry, push, pull or otherwise move objects., • Maintain a warm and friendly demeanor at all times., • Must be able to effectively communicate both verbally and written, with all level of employees and guests in an attentive, friendly, courteous and service oriented manner., • Must be effective at listening to, understanding, and clarifying concerns raised by employees and guests., • Must be able to multitask and prioritize departmental functions to meet deadlines., • Approach all encounters with guests and employees in an attentive, friendly, courteous and service-oriented manner., • Attend all hotel required meetings and trainings., • Participate in M.O.D. coverage as required., • Maintain regular attendance in compliance with Highgate Hotel Standards, as required by scheduling, which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which include wearing nametags., • Comply with Highgate Hotel Standards and regulations to encourage safe and efficient hotel operations., • Maximize efforts towards productivity, identify problem areas and assist in implementing solutions., • Must be effective in handling problems, including anticipating, preventing, identifying and solving problems as necessary., • Must be able to understand and evaluate complex information, data, etc. from various sources to meet appropriate objectives., • Must be able to maintain confidentiality of information., • Perform other duties as requested by management.

Compensation Type: Hourly Highgate Hotels: Highgate is a leading real estate investment and hospitality management company with over $15 billion of assets under management and a global portfolio of more than 400 hotels spanning North America, Europe, the Caribbean, and Latin America. With a 30-year track record as an innovator in the hospitality industry, this forward-thinking company provides expert guidance through all stages of the property cycle, from planning and development through recapitalization or disposition. Highgate continues to demonstrate success in developing a diverse portfolio of bespoke lifestyle hotel brands, legacy brands, and independent hotels and resorts, featuring contemporary programming and digital acumen. The company utilizes industry-leading revenue management tools that efficiently identify and predict evolving market dynamics to drive outperformance and maximize asset value. With an executive team of seasoned hospitality leaders and corporate offices worldwide, Highgate is a trusted partner for top ownership groups and major hotel brands. _ Location: Hampton Inn Louisville Downtown 101 E Jefferson StLouisville, KY 40202 Overview: The Engineer, Level 1, is responsible for ensuring that the property is maintained in the best possible condition at all times with the least amount of inconvenience to customers and employees. Responsibilities: • Make repairs to hotel air conditioning system: change filters, clean coils, replace motors., • Perform preventive maintenance on all equipment (i.e. boilers, chillers, HVAC-Heating Ventilation and Air Conditioning, electrical, etc.)., • Take required readings on equipment., • Test cooling tower and record readings., • Replace and program televisions as needed., • Replace light switches, receptacles, light bulbs and fixtures., • Perform furniture repair., • Replace and repair pumps., • Perform plumbing repairs (i.e. clogged drains, copper pipe, change washers, change handles, drain fittings, etc)., • Understand and be able to read blueprints and wiring diagrams., • Trace and repair all types of water lines., • Troubleshoot and repair kitchen equipment., • Maintain repair and preventive maintenance records., • Perform and maintain work to local, state and Federal codes., • Test, clean and repair swimming pools and spas., • Paint designated areas., • Repair and finish sheet rock., • Repair all types of wall coverings., • Repair and program hotel electronic lock system. Qualifications:, • High School diploma or equivalent and/or experience in a hotel or a related field required., • At least one year of progressive experience in a hotel or related field preferred., • Trade school and/or College course work in related field helpful., • Flexible and long hours sometimes required., • Heavy work - Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently and/or in excess of 20 pounds Must be able to effectively communicate both verbally and written, with all level of employees and guests in an attentive, friendly courteouse and service oriented manner., • Must be effective at listening to, understanding, and clarifying concerns raised by employees and guests., • Must be able to multitask and prioritize departmental functions to meet deadlines., • Approach all encounters with guests and employees in an attentive, friendly, courteous and service-oriented manner., • Attend all hotel required meetings and trainings., • Maintain regular attendance in compliance with Highgate Hotel Standards, as required by scheduling, which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which includes wearing the proper uniform and nametag., • Comply with Highgate Hotel Standards and regulations to encourage safe and efficient hotel operations., • Maximize efforts towards productivity, identify problem areas and assist in implementing solutions., • Must be effective in handling problems, including anticipating, preventing, identifying and solving problems as necessary., • Must be able to understand and apply complex information, data, etc. from various sources to meet appropriate objectives., • Must be able to cross-train in other hotel related areas., • Must be able to maintain confidentiality of information., • Must be able to show initiative, including anticipating guest or operational needs., • Perform other duties as requested by management.

Compensation Type: Hourly Highgate Hotels: Highgate is a leading real estate investment and hospitality management company with over $15 billion of assets under management and a global portfolio of more than 400 hotels spanning North America, Europe, the Caribbean, and Latin America. With a 30-year track record as an innovator in the hospitality industry, this forward-thinking company provides expert guidance through all stages of the property cycle, from planning and development through recapitalization or disposition. Highgate continues to demonstrate success in developing a diverse portfolio of bespoke lifestyle hotel brands, legacy brands, and independent hotels and resorts, featuring contemporary programming and digital acumen. The company utilizes industry-leading revenue management tools that efficiently identify and predict evolving market dynamics to drive outperformance and maximize asset value. With an executive team of seasoned hospitality leaders and corporate offices worldwide, Highgate is a trusted partner for top ownership groups and major hotel brands. _ Location: Residence Inn Louisville 120 N. Hurstbourne PkwyLouisville, KY 40222 Overview: The Engineer, Level 1, is responsible for ensuring that the property is maintained in the best possible condition at all times with the least amount of inconvenience to customers and employees. Responsibilities: • Make repairs to hotel air conditioning system: change filters, clean coils, replace motors., • Perform preventive maintenance on all equipment (i.e. boilers, chillers, HVAC-Heating Ventilation and Air Conditioning, electrical, etc.)., • Take required readings on equipment., • Test cooling tower and record readings., • Replace and program televisions as needed., • Replace light switches, receptacles, light bulbs and fixtures., • Perform furniture repair., • Replace and repair pumps., • Perform plumbing repairs (i.e. clogged drains, copper pipe, change washers, change handles, drain fittings, etc)., • Understand and be able to read blueprints and wiring diagrams., • Trace and repair all types of water lines., • Troubleshoot and repair kitchen equipment., • Maintain repair and preventive maintenance records., • Perform and maintain work to local, state and Federal codes., • Test, clean and repair swimming pools and spas., • Paint designated areas., • Repair and finish sheet rock., • Repair all types of wall coverings., • Repair and program hotel electronic lock system. Qualifications:, • High School diploma or equivalent and/or experience in a hotel or a related field required., • At least one year of progressive experience in a hotel or related field preferred., • Trade school and/or College course work in related field helpful., • Flexible and long hours sometimes required., • Heavy work - Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently and/or in excess of 20 pounds Must be able to effectively communicate both verbally and written, with all level of employees and guests in an attentive, friendly courteouse and service oriented manner., • Must be effective at listening to, understanding, and clarifying concerns raised by employees and guests., • Must be able to multitask and prioritize departmental functions to meet deadlines., • Approach all encounters with guests and employees in an attentive, friendly, courteous and service-oriented manner., • Attend all hotel required meetings and trainings., • Maintain regular attendance in compliance with Highgate Hotel Standards, as required by scheduling, which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which includes wearing the proper uniform and nametag., • Comply with Highgate Hotel Standards and regulations to encourage safe and efficient hotel operations., • Maximize efforts towards productivity, identify problem areas and assist in implementing solutions., • Must be effective in handling problems, including anticipating, preventing, identifying and solving problems as necessary., • Must be able to understand and apply complex information, data, etc. from various sources to meet appropriate objectives., • Must be able to cross-train in other hotel related areas., • Must be able to maintain confidentiality of information., • Must be able to show initiative, including anticipating guest or operational needs., • Perform other duties as requested by management.

Compensation Type: Yearly Highgate Hotels: Highgate is a leading real estate investment and hospitality management company with over $15 billion of assets under management and a global portfolio of more than 400 hotels spanning North America, Europe, the Caribbean, and Latin America. With a 30-year track record as an innovator in the hospitality industry, this forward-thinking company provides expert guidance through all stages of the property cycle, from planning and development through recapitalization or disposition. Highgate continues to demonstrate success in developing a diverse portfolio of bespoke lifestyle hotel brands, legacy brands, and independent hotels and resorts, featuring contemporary programming and digital acumen. The company utilizes industry-leading revenue management tools that efficiently identify and predict evolving market dynamics to drive outperformance and maximize asset value. With an executive team of seasoned hospitality leaders and corporate offices worldwide, Highgate is a trusted partner for top ownership groups and major hotel brands. _ Location: Hampton Inn Louisville Downtown 101 E Jefferson StLouisville, KY 40202 Overview: The Chief Engineer is responsible for the day-to-day operations of the engineering division. In the absence of the Director, the assistant will assume the administrative, financial and operating aspects of the hotel as they relate to engineering. Responsibilities: • Assist in developing and implementing plans to maintain property, equipment, grounds and other assets in a safe and acceptable state of repair., • Ensure the hotel is in compliance with all local, state and federal laws., • Supervise and train all Engineering staff in Customer Service, Empowerment, Standard Operating Procedures and Loss Prevention., • Create and post all Engineering staffs schedules., • Create and adhere to annual budget for department., • Assist in developing financial forecasts and actively participate in monthly profit/loss review meetings., • Create and implement preventative maintenance program for all hotel equipment., • Ensure all emergency and life safety equipment and systems are inspected, tested and certified per Highgate Hotel standards., • Actively participate in energy conservation programs., • Review all guest and meeting planner comment cards to ensure problems are identified and corrected in a timely manner., • Ensure compliancewith the Americans with Disabilities Act (ADA)., • Assist with the administration of all vendor contracts controlled by the engineering department., • Ensure that room maintenance requests are handled in a prompt and courteous manner., • Follow up on all alarms immediately to determine the exact location and cause.Determine emergency status and report findings to Front Desk.Take immediate action as necessary., • Assist as necessary with special projects and renovations., • Support and participate in all Highgate Hotel programs., • Participate in Highgate Hotel Safety Committee. Qualifications:, • At least 3 years of progressive facilities management experience in a hotel or a related field; or a 2-year college degree and 1 year of related management experience., • High school diploma or equivalent required., • Stationary Engineer’s license if required by local code., • HVAC, electrical, plumbing, boiler operations and general maintenance skills required., • Long hours sometimes required., • Heavy work – Exerting up to 100 pounds of force occasionally, and /or 50 pounds of force frequently and/or up to 20 pounds of force constantly to lift, carry, push, pull or otherwise move objects., • Maintain a warm and friendly demeanor at all times., • Must be able to effectively communicate both verbally and written, with all level of employees and guests in an attentive, friendly, courteous and service oriented manner., • Must be effective at listening to, understanding, and clarifying concerns raised by employees and guests., • Must be able to multitask and prioritize departmental functions to meet deadlines., • Approach all encounters with guests and employees in an attentive, friendly, courteous and service-oriented manner., • Attend all hotel required meetings and trainings., • Participate in M.O.D. coverage as required., • Maintain regular attendance in compliance with Highgate Hotel Standards, as required by scheduling, which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which include wearing nametags., • Comply with Highgate Hotel Standards and regulations to encourage safe and efficient hotel operations., • Maximize efforts towards productivity, identify problem areas and assist in implementing solutions., • Must be effective in handling problems, including anticipating, preventing, identifying and solving problems as necessary., • Must be able to understand and evaluate complex information, data, etc. from various sources to meet appropriate objectives., • Must be able to maintain confidentiality of information., • Perform other duties as requested by management.

Job Description Hazen and Sawyer is seeking a Principal CAD/BIM Designer to collaborate with project managers and engineers in developing process mechanical BIM (Revit) models, families, and contract drawings for water, wastewater, and pump station facility projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK. Work Setting: In-person (All in office/field) Key Responsibilities: • Developing Revit models, families, and contract documents, • Lay out process mechanical piping in Revit to create enlarged plans, sections, and details., • Coordinate with site civil, structural, architectural, HVAC, electrical, and I&C disciplines to identify and resolve design conflicts., • Perform clash detection at submittal milestones and support clash resolution., • Incorporate engineer and CAD/BIM Coordinator redlines into drawings and models., • Coordinate design submittals with project discipline leads., • Verify deliverables comply with Hazen and client CAD/BIM standards. Required Qualifications: • Bachelor’s degree with 7+ years of relevant experience, or associate degree/technical certification with 10+ years of relevant experience., • Proficiency in Autodesk Revit and Autodesk FORMA, formerly Autodesk Construction Cloud (ACC)., • Proficiency in AutoCAD/Civil 3D is preferred., • Experience leading and coordinating construction contract drawings for medium- and large-scale projects., • Experience mentoring early-career designers. Preferred Qualifications: • Hands-on Revit experience, especially with MEP design, • Process Mechanical Revit experience, • Experience collaborating across disciplines, • Water or wastewater industry experience What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description About Us Join a talented team of engineering professionals at Vogt Power International Inc. Vogt is based in Louisville, KY and specializes in the design, manufacture and supply of equipment and solutions to the power generation industry. We are an industry leader in heat recovery steam generators (HRSGs) with both domestic and international customers. Position Summary The CAD Design Coordinator/Checker (HRSG Services) is responsible for performing complete and thorough checking of Heat Recovery Steam Generator (HRSG) non-pressure assemblies, pressure parts, structural component assemblies and detail drawings of equipment. Essential Responsibilities -Review project customer specifications -Prepare major assembly, section and detail drawings and itemized bill of materials -Coordinate with Project Design Lead on the project to which they are assigned -Communicate and assist other departments with calculations and datasheets -Develop and maintain 3D model of piping and equipment -Generate weight calculations for parts, sub-assemblies and assemblies -Participate in internal and customer 3D model walk-throughs -Revise drawings -Provide thorough checking of drawings and bill of materials -Create project as-built drawings if required -Assist in development of General Arrangements and Setting drawings -Assist with review of vendor generated drawings -Maintain knowledge of current designs, standards, and procedures -Assist and instruct drafters in the use of standard and acceptable drafting techniques, detailing, manufacturing, and construction procedures for company products -Follow internal standards, project contracts and specifications, and applicable codes and standards -Assist with preparation and maintenance of internal design standards -Provide support to the Project Engineer, Project Design Lead, and Product Engineer for shop and field issues -Serve as consultant for shop and field questions -Travel to jobsite(s) or vendor shops as required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Requirements -High school diploma supplemented by college level engineering courses or associated degree in an engineering related field. Demonstrated knowledge and technical competency may be substituted for the educational requirements -Five (5) years CAD design experience (HRSG CAD design, ASME Piping & Pressure Vessel or similar preferred) -Experience with AutoDesk suite of design software (AutoCAD, Plant3D, Navisworks, Revit, Inventor, etc.) -Demonstrated excellent written, verbal, and interpersonal communication skills -Demonstrated excellent analytical and computer skills required -Knowledge of ASME codes and product application -Must be organized and able to work under pressure to meet deadlines -Self-motivated, detail-oriented, and eager to learn design standards and engineering practices -Demonstrated ability to adapt, take initiative, and grow in a fast-paced environment To provide greater transparency to candidates, we include base pay ranges for all US-based job postings that encompass all potential locations and levels for the open position. Our base pay ranges are set based on the function, discipline, level and regional location and are benchmarked against companies in the same or similar industry. Final offers may vary based on multiple factors, including; education, depth and relevance of work experience, relevant licenses and certifications, and may vary from the amounts listed in the job posting. The base pay range for this CAD Design Coordinator/Checker (HRSG Services) role is $75,000 - $110,000 annually.

Job Description Title: Service Engineer Reports to: Service Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Salary Range: $83k+ (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Other duties as assigned. Minimum Requirements: • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job DescriptionDescription: JOB SUMMARY: The Electrical Project Engineer is responsible for the complete electrical engineering scope of assigned projects. This person will lead all phases of an electrical engineering project to include concept, research, estimating support, component selection, network design, panel design, device layout, device troubleshooting, programming, in house testing, on-site installation, commissioning, and after-sales support. A successful Electrical Project Engineer has a high level of knowledge and understanding of the full scope of electrical engineering practices, theories, and programming to implement electrical engineering for a project from concept to completion. This person will create the project execution plan, assign tasks to resources, monitor and report progress, develop recovery plans, and manage deviations. The Electrical Project Engineer serves as the subject matter expert (SME) for the project team and provides coaching and guidance. In collaboration with the Electrical Engineering Leadership team, the Electrical Project Engineer strives for continuous improvement in department processes and employing the latest technology and industry best practices in all facets of project execution. ESSENTIAL FUNCTIONS: • Develop, manage, monitor, and maintain project schedules., • Assign day to day tasks of project team members., • Read and understand scope from contract documents and drawings., • Effectively communicate project, department, and company requirements to project team or other stakeholders., • Manage assigned projects to successful completion prioritizing safety, quality, schedule, and cost., • Participate in, or complete personally, the design of the complete control systems including, power distribution, device layout, network design, panel layout, and device selection., • Participate in, or complete personally, the programming, both HMI and PLC, of the complete control systems., • Create Descriptions of Operations for complete systems., • Communicates technical information to non-technical stakeholders, executive leadership, customers, and potential customers., • Participate in, or complete personally, the commissioning of complete control systems., • Strive for continuous improvement by identifying improvements in current processes and collaborate with management to adopt these improvements., • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging, and success driven culture., • Travel up to 50% PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time., • Repetitive typing/data entry., • Lifting up to 50 pounds. WORK SCHEDULE: This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. Requirements: REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: • Excellent level understanding of project management practices and tools., • Advanced proficiency in several programming languages and control device networks for PLCs with good aptitude for learning the programming for new/additional systems., • Ability to read and understand written specifications, as well as contract drawings and be capable of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, baggage handling systems and manufacturing., • Ability to check diagrams to correct errors and use that information as a training opportunity / transfer of knowledge to foster a continuous improvement environment to further develop the skills of less experienced controls engineers., • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver., • Self-starting instincts and strong analytical skills., • Excellent verbal and written communications skills., • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 3+ years in the electrical engineering field or related area, • 2+ years in Material Handling Industry, preferably within Baggage Handling., • 1+ years as Electrical Project Engineer, • Legally authorized to work in the United States., • Ability to obtain airport security clearance as needed. It is the policy of ControlTouch Systems, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems, LLC will provide reasonable accommodation for qualified individuals with disabilities.

Job DescriptionDescription: JOB TITLE: Mechanical Project Engineer REPORTS TO: Director, Mechanical Engineering JOB STATUS: Full Time FLSA STATUS: Exempt DATE: April 2025 JOB SUMMARY: The Mechanical Project Engineer will play a critical role in the design, organization, deployment, and leadership of baggage handling systems and components. You will collaborate successfully with stakeholders including project managers, principal engineers, engineering designers and design engineers, other engineering disciplines, procurement, and field services to complete baggage handling projects successfully. You will focus on safe, high-quality output, on schedule and on budget. Our Mechanical Project Engineer would be responsible in part for overall ownership, design, and supervision of a project, based on customer specifications and as-sold information. You would understand the system fully and make design decisions, work with the customer to ensure their needs are fully met, requisitioning all applicable materials, and lead the mechanical engineering team on a project. You will direct the creation of comprehensive, detailed installation and component level drawing packages per customer specifications and field installation team requirements. ESSENTIAL FUNCTIONS: • Aid in design of custom baggage handling systems using CAD software (2D AutoCAD, 3D Inventor)., • Perform engineering calculations, such as horsepower and speeds., • Collaborate with internal stakeholders, such as project management, procurement, field services, and other engineering disciplines to ensure mechanical engineering is aligned fully with the organization., • Represent the company appropriately during detailed design reviews and other collaborative participation with customers and consultants., • Work together with vendors to ensure adherence of design and quality., • Lead a team of designers, design engineers, and lead designers., • Track the project against schedule, scope, and budget., • Create budgets and forecasts for both cost and hours., • Identify potential issues, provide efficient solutions, and make decisions when required., • Create and maintain equipment Manifests and other engineering documentation., • Review detailed field installation drawings containing detail for customer approval and field installation ease., • Ensure all designs comply with specifications and standards., • Lead design reviews and other regular meetings., • Provide support during fabrication and construction, both in office and on-site as required. WORK ENVIRONMENT: • Office primarily, with occasional field visits., • Up to 20% travel may be required. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • High productivity in office., • Sitting for prolonged periods of time., • Repetitive typing/data entry., • Lifting up to 20 pounds. WORK SCHEDULE: This position works in office. General office hours are M-F, 7a-4p or 8a-5p. Working hours may vary to meet project requirements. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Excellent leadership and delegation skills., • Ability to read and understand customer specifications, engineering drawings, Bills of Material, and equipment Manifests., • Detail oriented, organized, and quality driven., • Ability to multi-task and change focus rapidly., • Critical thinker and problem-solver., • Self-starting instincts and motivation to work independently., • Capable of handling stress in a fast-paced, deadline driven environment., • Excellent verbal and written communication skills. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 5+ years’ experience in conveyance, construction, or other system-level engineering functions, or relevant project engineering experience., • Knowledge of conveyor systems, specifically baggage handling, is a plus., • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook, Project), • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed.

Job Description Join LECO as an Analytical Instrumentation Field Support Engineer For more than 80 years, LECO has pioneered world-class laboratory instrumentation from our home base in St. Joseph, Michigan. As a family-owned company, we value long-term relationships, trust, and stability—and we extend those values to every customer interaction in the field. A day in the life It’s Monday morning. You review your schedule from your home office, confirm spare parts in your trunk stock, and head to a customer site. By mid-morning, you’re troubleshooting a DC power supply issue on an analytical instrument. After lunch, you complete a preventive maintenance checklist and update firmware with the latest upgrade kit. You wrap up the day by training a new user on instrument theory, operation, software navigation, and care. Tomorrow brings an installation at a metallographic lab—and a chance to strengthen another customer relationship. Role overview • Employment type: Full-time, remote, salaried with regular travel., • Customer-facing position focused on service at client facilities and relationship building., • Primary territory: Ohio, Indiana, Kentucky, and West Virginia, with occasional trips to neighboring regions as needed., • Travel cadence: Up to 5 days per week, with as many as four overnight hotel stays (Monday–Friday) when required., • Ideal home base: Near Louisville, KY., • Signing bonus: $5,000. What you’ll do, • Deliver preventive and general maintenance, diagnose breakdowns, and implement corrective repairs on analytical and metallographic instruments., • Install new systems and apply updates and upgrade kits., • Provide end-user training on theory, operation, software, and maintenance best practices., • Ensure all service activities align with LECO’s ISO accreditation requirements. What sets you up for success, • A self-driven approach with clear, professional written and verbal communication., • Professionalism and strict adherence to customer site protocols and safety rules., • Strong attention to detail and organizational skills., • Willingness to travel daily with up to four overnights per week (Monday–Friday)., • Valid driver’s license with a clean driving record., • Mechanical aptitude and experience with AC and DC electronics—or a demonstrated ability to learn quickly., • Chemistry or military background is a plus, not a requirement. Training and growth, • Initial technical training at LECO headquarters in St. Joseph, Michigan for 3–5 months., • Field-based onboarding alongside experienced Service Engineers across the country., • Annual service training at LECO headquarters to keep your skills current. Education and pathways We welcome multiple routes into this role. One or more of the following qualifies you: • Two-year technical degree or trade school., • Prior military service with technical training., • Equivalent technical work experience or training. Compliance, • Pass a background check and substance abuse screenings, • Must be authorized to work in the US without restriction, • EOE M/F/VET/Disability

Job DescriptionMaintenance Engineer Supervisor We are seeking a skilled and reliable Maintenance Engineer Supervisor to support the overall upkeep and functionality of our property. This role includes performing routine maintenance, addressing guest requests, and ensuring all systems operate safely and efficiently. The ideal candidate has a strong work ethic, basic knowledge of building systems, and a commitment to providing a safe and well-maintained environment. Key Responsibilities • You will help ensure our hotel runs smoothly by maintaining and repairing various systems and equipment., • Your daily tasks will include performing routine maintenance, diagnosing and fixing issues, and assisting with upgrades and installations., • You will report to the General Manager., • A career as a maintenance engineer can lead to positions such as engineering supervisor, chief engineer, or even facilities management within the hospitality industry.Education & Experience Hotel experience is always a plus! Applicants should have: • No educational minimum is required, • Previous experience in a similar or related positionWhat You’ll Need to Succeed, • Eligible to work in the United States, • Ability to read, write, and communicate effectively in English, • Ability to sit, stand, bend, kneel, and lift as required—with or without reasonable accommodations, • Availability to work a flexible schedule, including evenings, weekends, and holidays if needed, • A warm, professional demeanor that reflects HVMG’s Culture of Excellence Why Our Associates Love HVMG • Career growth opportunities across our nationwide portfolio, • Flexible scheduling, • Access up to 40% of your earned wages before payday with PayActive, • Paid Time Off (PTO) and Paid Holidays, • Full healthcare benefits: medical, dental, and vision, • 401(k) with guaranteed 4% match and no vesting period, • Exclusive hotel and food & beverage discountsAbout HVMG Our Be Excellent culture is more than just words on a website -- we live and breathe it. As one associate said in an anonymous survey, "This is the best management company I've ever worked for. They walk the talk from the corporate office to the field." We believe that the hotel business is one of the few industries in which successful career paths can start anywhere on the org chart. You control your destiny, and, if our executives are any indication, today's dishwasher can be tomorrow's Senior Vice President. The above job description is not an exhaustive list of all the duties and responsibilities of the position, nor should it be construed as a contract. HVMG is an equal opportunity employer. We will not discriminate against employees or applicants for employment on any basis prohibited by federal, state, or local laws. This policy governs all aspects of employment, including selection, job assignment, compensation, promotion, discipline, termination, and access to benefits and training.

Job DescriptionDescription: JOB TITLE: Controls Engineer III REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Controls Engineer III is responsible for leading all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working independently. A successful Controls Engineer III has an expert level of knowledge and understanding of the full scope of controls engineering practices, theories, and PLC programming to implement the controls for a project from concept to completion. The Controls Engineer III serves as a subject matter expert and resource for their team and provides coaching and guidance while working at a job site or in-office collaboration. To keep their knowledge up-to-date, the Controls Engineer III will attend training in the latest controls technology and have the ability to share that knowledge with less experienced controls engineers as well as work collaboratively with the Engineering Manager to provide insight on the latest advancements in the field of controls engineering to implement new standards for the company. ESSENTIAL FUNCTIONS: • Expert understanding of AC/DC control systems., • Use of computer software for design engineering and PLC programing., • Capable of trouble shooting a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Designing and developing layouts for electrical circuits or systems for power and control distribution., • Develop/create electrical diagrams with expert level of efficiency., • Ability to locate and correct mistakes in electrical diagrams developed by others on the team and use this information as a training opportunity for others to foster the continuous improvement of their skills. (Transfer of knowledge), • Be the controls lead and manage other engineers on project teams., • Capable of creating functional system test plans for use in field commissioning and provide written descriptions of system operations for technical documents., • Communicate with other team members effectively and keep Administrative Coordinator advised of schedule; checking and using voicemail and email diligently; and maintaining the team relationship., • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging and success driven culture, • Travel up to 50% or more PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time when in office, • Standing and walking for prolonged periods of time when at a jobsite, • Climbing may be required when working at a jobsite, • Repetitive typing/data entry, • Lifting up to 50 pounds WORK SCHEDULE: This position works in office when not traveling to job sites. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements of the project as needed. It is the policy of Sortation Labs, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, Sortation Labs, LLC will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Advanced proficiency in several programming languages and control device networks for PLCs with good aptitude for learning the programming for new/additional systems., • Ability to read and understand written specifications, as well as contract drawings and be capable of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, and manufacturing., • Ability to check diagrams to correct errors and use that information as a training opportunity / transfer of knowledge to foster a continuous improvement environment to further develop the skills of less experienced controls engineers, • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 6+ years in the field or related area., • Experience Required:, • PLC programming, debugging and commissioning, • Plan/hardware design, • AutoCAD (AutoCAD E desired), • Microsoft Office Suite, • Basic knowledge of electrical equipment and local building codes such as UL508a, NEC and NFPA, • Experience Preferred:, • Hands-on mechanical and electrical capabilities, • Troubleshooting, • Material Handling specifically the Parcel and Warehouse & Distribution Industry, • Understanding VFDs, Servos, sensors and Vision Systems., • Legally authorized to work in the United States, • Ability to obtain facility security clearance as needed

Job Description We are seeking an experienced Automation & Controls Engineer to join our growing OEM engineering team! This role focuses on refining electrical and instrumentation control components and systems for industrial water recycling equipment used in sand/aggregate mining, precious minerals & stones, municipal, energy, pulp & paper, and building sectors. As an Automation Controls Engineer, you will lead the electrical and instrumentation aspects of engineering projects and product development, supporting a wide range of industrial applications. This position reports directly to and works closely with the Automation & Controls Manager. Key Responsibilities • Design and develop electrical systems and instrumentation packages for industrial equipment., • Conceive, develop, and program automation systems for process applications., • Define and design dewatering and bulk material processing and transport technologies for current and future projects., • Design and select low and medium voltage switchgear., • Conduct shop testing of control panels, starter panels, and automation systems., • Ensure designs align with engineering principles, business standards, and product requirements., • Create innovative and practical designs to meet project objectives., • Document technical data in compliance with engineering policies and procedures., • Provide technical support and function as a key resource for automation-related inquiries., • Collaborate with customers and suppliers, including occasional domestic travel (25-35%) for commissioning and troubleshooting., • Support sales and marketing teams by assisting in proposal development. Qualifications & Requirements • Bachelor’s degree in Electrical, Computer, Controls, Industrial, or Mechanical Engineering, or a related field (or equivalent work experience)., • 1-3+ years of experience in PLC and HMI programming, SCADA development, and/or control panel design Preferred Skills & Attributes • Strong background in PLC programming, relay control logic, and HMI programming., • Proficiency in AutoCAD and the ability to review schematics, specifications, and drawings., • Solid analog and digital circuit design skills including 4-20mA circuits., • Hands-on experience with electrical engineering tools and test equipment., • Experience in component selection and qualification for control and starter panels., • Strong problem-solving abilities and attention to detail., • Excellent communication and teamwork skills, with the ability to engage with customers and internal stakeholders., • Ability to manage multiple projects and priorities effectively. Travel Requirement This position requires 25 – 35% travel, involving visits to client sites and other locations as needed to support project implementation and troubleshooting. Benefits • Annual Profit-Sharing Program., • Paid vacation & sick time., • Company-paid health insurance for employees., • Optional benefits including 401(k), dental, vision, short & long-term disability, life insurance, and cancer insurance. Job Type: Full-time, Exempt Work Location: In-person Louisville, KY with 25-35% domestic travel

Job Description JQOL is seeking a Structural Engineer Project Manager to lead the planning, coordination, and execution of structural engineering projects across a variety of markets, including commercial, institutional, and public infrastructure. This is a key leadership position for an experienced structural engineer with strong technical skills and a proven ability to manage projects, collaborate across disciplines, and build lasting client relationships. The ideal candidate will combine engineering expertise with excellent communication and organizational skills to deliver high-quality projects on time and within budget, while mentoring team members and supporting the firm's continued growth. Key Responsibilities • Manage structural engineering projects from conceptual design through construction completion, ensuring quality, budget, and schedule objectives are met., • Lead internal design teams and coordinate with architects, clients, contractors, and other consultants., • Perform and oversee structural analysis and design for buildings and structures using steel, concrete, masonry, and wood materials., • Prepare and review construction documents, technical specifications, and engineering reports., • Conduct site visits, perform field inspections, and provide construction phase support, including responding to RFIs and reviewing shop drawings., • Act as primary point of contact for clients, maintaining strong working relationships and ensuring client satisfaction throughout the project lifecycle., • Support proposal development and participate in interviews and presentations for new business opportunities., • Mentor and oversee junior staff and coordinate workload to ensure timely and accurate deliverables. Preferred Qualifications • Bachelor's degree in Civil or Structural Engineering required; Master's degree preferred., • Licensed Professional Engineer (PE) in Indiana and/or Kentucky; SE license preferred or the ability to obtain., • Minimum 6–10 years of experience in structural engineering, with at least 2–4 years managing projects., • Proficient in structural analysis and design software (e.g., RISA, RAM, ETABS, Revit)., • In-depth knowledge of IBC, ASCE 7, AISC, ACI, and TMS codes and standards., • Strong organizational skills with the ability to manage multiple projects and deadlines., • Effective verbal and written communication skills, including client-facing interactions and technical documentation., • Proficiency in Microsoft Office 365 suite (Word, Excel, PowerPoint, Outlook). Location Position is available in our Indianapolis, IN office.

Job DescriptionRapid Industries is looking to add a Controls Engineer to our growing team! Rapid Industries is a world leader in conveyor systems since 1967. We design, fabricate, install, and maintain complete material handling systems to fit all applications. We have a large presence in the automotive and appliance industries, specializing in overhead and floor conveyors along with specialty automation equipment. This position will work within the Engineering department on control systems for our industrial customers. This position will work closely with the Vice President, Sr. Electrical Engineer, and with Project Managers on specific projects. Qualified candidates should have a strong knowledge of industrial controls components and the use of these. Knowledge of AutoCAD is required. PLC Programming is a plus. Rapid will mentor successful applicants on PLC programming. The candidate should be willing to grow and learn in a team environment. Responsibilities: • Assist with various tasks that will produce accurate control designs and bill of materials., • Create purchase requisitions for needed materials., • Communicate with the panel builder or shop personnel on design or build questions., • Inspect panel builds at the panel fabricator's facility., • Strong proficiency in AutoCAD required, AutoCAD Electrical experience is a plus., • Strong communication skills verbally and administratively through the use of Excel, Word, and PowerPoint., • Must be able to travel (approximately 10-15%) to customer site for project kickoff, pre-project design, and assist project engineer with equipment commissioning and troubleshooting if necessary. Experience and Education:, • 3-5 year's experience in controls automation/PLC programming preferred, • Degree in Electrical Engineering, Electrical Engineering Technology, Computer Science, or other related field. Powered by JazzHR h9bg2pltBj

Job DescriptionDescription: Come grow with us! qubeworX is a professional UL508A certified panel fabrication and wiring facility. Our in-house automated technology, concept to delivery thinking, and logistics implementation make us a leader in the industrial control fabrication field. We are currently seeking Panel Techs of all levels to join our team. Check out the job description below and apply today! JOB TITLE: Panel Tech III REPORTS TO: Panel Shop Supervisor JOB STATUS: Full Time FLSA STATUS: Non-Exempt DATE: June 29, 2023 JOB SUMMARY: The Panel Tech IIII is responsible for the assembly of Electrical Control Panels. This role focuses on interpreting control panel layouts and electrical drawings. The Technician will be responsible for the layout and physical mounting of components to the back panel, wiring of all components, installation of control panel into an enclosure while primarily working independently with minimal supervision. All duties must be performed in accordance with all company policies and procedures. ESSENTIAL FUNCTIONS: • Provide knowledge of layout design and wiring to junior panel builders, communicate effectively, (written and verbally), with peers., • Maintain red line drawing mark-ups of changes required during fabrication., • Communicate red line changes to Team Leader/supervisor for revision prior to completion., • Read drawings to establish correct wiring/cable runs., • Run wires point to point from component to component and to termination., • Perform wire labeling at connection points., • Successfully terminate various types of copper connectors., • Choose the correct tool or methodology for specific wiring tasks., • Use provided drawings to layout wireways/din rail and components on back panels and enclosures., • Route and bundle wires neatly to meet company and UL standards., • Perform point to point wiring of, including but not limited to, relays, controls, PLCs, I/O Modules, VFDs, Interfaces, electrical components, & Instrumentation., • Understanding of electrical circuitry including: power distribution, motor controls, AC/DC high voltage, AC/DC low voltage, relay logic and emergency stops., • Understanding of wiring and operation of electrical components including: PLCs, VFDs, transformers, power supplies, safety relays, control relays, pilot devices, pushbutton/selector switches, circuit breakers, fuses, phase monitors, contactors and overload relays., • Assume collateral duties such as maintaining Consumable inventory., • Other responsibilities as needed., • Follow all Company Safety Standards and wear applicable PPE WORK ENVIRONMENT: This work is performed in a panel shop facility which may or may not be climate controlled depending upon the work location. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to:, • Lift up to 30 pounds frequently, and up to 70 pounds occasionally, • Standing for long periods of time,, • Frequent bending, twisting, kneeling,, • Climbing ladders as needed It is the policy of qubeworX, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, qubeworX, LLC will provide reasonable accommodations for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Demonstrate an expert knowledge of blueprint, wiring diagram, and schematic reading competency, • Good written and verbal communication skills, • Working knowledge of Computer software to include but not limited to: Microsoft Office Suite, and more, • Highly proficient in troubleshooting electrical and mechanical systems., • Experience with:, • Multi-meter – resistance, current and voltage testing, • Hand and power tools including but not limited to: drills, jig saws, wireway/din rail cutters, grinders, knockout punches, band saws, and more., • Blueprint, wiring diagram, and schematic reading competency EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Two-year Electrical Engineer (EE) technical degree, military equivalent or equivalent years of related experience preferred and,, • 3 – 5 years hands-on experience in panel production preferred, • Legally authorized to work in the United States.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins works with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. Eurofins is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. Eurofins is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. The Group also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over just 30 years, Eurofins has grown from one laboratory in Nantes, France to 55,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 50 countries. Eurofins offers a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. Job Description About the Role We are seeking a motivated and hands-on Mechatronics Engineer to support the development, integration, and maintenance of advanced robotic and automation systems used in proprietary oligonucleotide synthesis and biotech manufacturing operations. This role is ideal for an engineer who enjoys working across mechanical, electrical, controls, and automation disciplines in a fast-paced R&D and manufacturing environment. The successful candidate will contribute to the design, assembly, troubleshooting, and continuous improvement of robotic systems, automated equipment, and electromechanical devices that support DNA/RNA synthesis operations. Key Responsibilities • Design, develop, and maintain automated electromechanical and robotic systems, • Support proprietary oligonucleotide synthesis robotic systems and automated manufacturing platforms, • Perform robotic system assembly, integration, testing, and troubleshooting, • Develop mechanical and electrical designs using SolidWorks, • Create and maintain electrical schematics, wiring layouts, mechanical assemblies, and BOMs, • Integrate sensors, motors, actuators, pneumatic systems, motion controls, PLCs, and embedded controllers, • Assist in prototype development, equipment upgrades, and process automation initiatives, • Support installation, calibration, preventive maintenance, and repair of automation equipment, • Troubleshoot mechanical, electrical, and control system issues in manufacturing and laboratory environments, • Collaborate with cross-functional teams including manufacturing, process engineering, software, and R&D teams, • Prepare technical documentation, SOPs, assembly instructions, and engineering reports, • Support continuous improvement and scale-up activities for automated synthesis systemQualifications Required Qualifications • Bachelor’s degree in Mechatronics Engineering, Mechanical Engineering, Electrical Engineering, Robotics Engineering, or related field, • 1–5 years of industry experience in automation, robotics, mechatronics, or related engineering fields, • Experience with SolidWorks for both mechanical and electrical design, • Knowledge of automation systems, robotics, and motion control systems, • Understanding of sensors, actuators, pneumatics, motor controls, and embedded systems, • Hands-on experience with equipment assembly, integration, and troubleshooting, • Strong analytical, troubleshooting, and problem-solving skills, • Ability to work independently and collaboratively in a fast-paced environment Preferred Qualifications • Experience with industrial robotic systems and robotic assembly, • Experience supporting biotech, life science, or laboratory automation equipment, • Familiarity with machine vision systems and smart manufacturing technologies, • Experience with embedded controllers and microcontrollers Work Environment • Hands-on engineering role supporting both laboratory and manufacturing operations, • Fast-paced biotech manufacturing environment operating multiple shifts, • Opportunity to work on cutting-edge robotic automation systems for DNA/RNA synthesis, • Collaborative and innovation-driven engineering environment, • Exposure to advanced automation, robotics, and biotech manufacturing technologies Additional Information Schedule: • M-F, 8AM-5PM What we offer: • Excellent full time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA Genomic Services is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description The Structural Engineer works as part of a multi-discipline project team to develop the structural design for HRSG projects. The Structural Engineer's role is responsible for collaborating with other disciplines in order to create custom structural designs for new large capital projects as well as field retrofits. The Structural Engineer is also responsible for design developments and improvements to improve the overall effectiveness of the product. • Perform engineering analyses using a combination of hand calculations, spreadsheet programs, and advanced analysis tools., • Provide leadership by learning, developing, and coordinating new techniques, standardizing procedures, and providing technical instruction and mentoring to department staff., • Provide organized and well written reports to describe assumptions, steps taken, and results from work performed., • Work directly with the Design group to create accurate and efficient structural drawing packages, • Monitor the work of our fabricators by performing technical reviews., • Identify/develop and use tools and techniques that improve the accuracy and/or efficiency of Department and project work., • Develop designs that increase the ease of fabrication, transportation and construction of our product., • Provide recommendations and promote development of new products, keeping abreast of industry advancements and needs To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Requirements • Bachelor’s degree in Structural or Civil Engineering, • Must be able to manage multiple projects simultaneously and respond quickly to problems., • Comfortable using structural analysis software such as Autodesk’s Robot Structural Analysis or Bentley’s STAAD.pro, • Familiarity using Autodesk applications such as AutoCAD and Navisworks, • Proficient in Microsoft Excel, • Good communication skills and ability to work well in a team environment, • Must be able to travel when required., • Preferred, but not required:, • Licensed Professional Engineer, • Master of Engineering with emphasis in structures, • Proficient with Autodesk Revit To provide greater transparency to candidates, we include base pay ranges for all US-based job postings that encompass all potential locations and levels for the open position. Our base pay ranges are set based on the function, discipline, level and regional location and are benchmarked against companies in the same or similar industry. Final offers may vary based on multiple factors, including education, depth and relevance of work experience, relevant licenses and certifications, and may vary from the amounts listed in the job posting. The base pay range for this Senior Structural Engineer role is $100,000 - $130,000 annually.

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries with over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 75,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety, and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: This position is responsible for all activities on a construction site or several sites including liaison with the client, all mechanical and electrical activity as well as the welfare, health and safety of all personnel and environmental responsibility. This role will also provide support to the US Energy Aftermarket Team for all aspects of the bidding process from quotation through completion of the purchase contract. The role of site manager will also actively manage sub-contract labor to ensure timely execution of the installation project and ensure all site safety procedures are adhered to. Key Accountabilities: 1)Pre bid activities • Technical review of internal and external client enquiries as they pertain to site installation, • Preparation of technical documentation to support bidding activities, • Site surveys to document client requirements and dimensional checks of existing equipment for both Energy and APC groups, • Preparation of install estimates including labor and equipment requirements, • Analyses and proposes changes in equipment or use of materials which could result in cost reduction or more efficient operation 2)Post order activities • Coordinates and expedites on site dismantling and installation of plant related equipment, • Responsible for the complete site management of relative AAF site, • Responsible for Environmental, Health and Safety conditions on site, • Production of and subsequent execution of project related documents examples of which include:, • oRisk assessment and method statements, • o EH&S programs, • oSite Programs / schedules, • Responsible for actively managing sub-contract labor to ensure timely execution of dismantling / installation project and that all site safety procedures are adhered to, • Responsible for technically and commercially controlling multiple project activities simultaneously, working to tight time deadlines and operate efficiently under pressure, • Ensures company standard procedures are followed in connection with purchase of material or services, • Leads meetings or direct communications with customer to assist in resolution of problems or complaints during site outages, • Report and escalate to management risks as needed, • Commissioning of AAF products on site, • Troubleshooting and determination of fix for any product site issues 3)Sub-contractor & equipment assessment / management • Locates and assesses potential fabrication and installation subcontractors, • Collates and submits necessary enquiry documents, • Obtains / analyses quotations, • Coordinates / expedites contract deliverables 4)Quality Management • To oversee all quality and inspection requirements for the EP and small MFAS equipment including the development and continual improvement of associated quality program(s), these being in alignment with US, • Responsible for the development, implementation, and continuous improvement of P&I’s Product Quality Program, • Supervise, teach, and manage external vendors to deliver products compliant to P&I’s Quality Program, Engineering specifications, and manufacturing standards., • Support Supplier Development efforts and manage/monitor vendor quality metrics including documenting and maintaining supplier capabilities (in conjunction with the Sourcing team)., • Meet with vendors, customers, quality representatives, and company personnel to discuss and resolve quality problems as required., • Responsible for assigned supplier performance in coordination with the Souring Director. Develop and maintain supplier quality KPIs to assure the consistent use of high-quality vendors., • Suggest to management product improvement ideas, alternative materials, and sourcing strategies based on industry and supplier research 5)Maintains a teamwork philosophy with other departments to facilitate problem solving and good customer service . 6)Additional duties as assigned. Requirements: Position Requirements: • Bachelor’s degree in Engineering preferred;, • Experience in technical industry desired; machinery/engineering preferred;, • 7-10 years' working in site construction / installation experience essential;, • Structural steel and plate fabrication experience;, • Ability to manage small to medium construction sites;, • Proven man management experience leading site installation teams within Power, Oil & Gas or industrial markets;, • Proven experience managing sub-contractors;, • Experience managing operating costs and budgets;, • Working knowledge of safety and environmental practices and regulations including OSHA compliance and a proven record of improving safety results;, • Demonstrated leadership, influence and communication skills;, • Must have strong interpersonal skills, maturity and good judgment and be capable of communicating with a diverse range of individuals;, • Excellent, proven interpersonal, verbal / written communications and organizational skills;, • Demonstrated ability to multi - task and work in a fast - paced setting;, • Experience in managing or operating within a multi-discipline construction team, • Must exhibit the following core competencies: ocommunication skills oproblem analysis and solving oorganizational and planning skills ojudgment oattention to detail onegotiating skills ocreativity oteam player ostress tolerance ocustomer orientation opresentation skills

Job Description Job Title: Electrical Engineer Job Description This Electrical Engineer role focuses on designing and detailing motor control panels, PLC panels, and associated control systems for material handling equipment used in parcel post operations. You will create precise AutoCAD 2D and AutoCAD Electrical drawings, including power schematics and field device layouts, to support large-scale automation projects in an engineering- and technology-driven environment. Responsibilities • Create detailed electrical design drawings using AutoCAD 2D and AutoCAD Electrical for control systems and hardware., • Design motor control panels, PLC panels, and associated control systems for material handling equipment used in parcel post applications., • Develop detailed drawings for 480V power schematics, ensuring accurate representation of power distribution and protection., • Prepare detailed 120V power schematics for control and auxiliary systems., • Produce I/O drawings that clearly define inputs, outputs, and signal interfaces for PLC and control systems., • Create field device layout drawings that accurately position sensors, actuators, and other devices within the system., • Apply UL508A and NEC electrical codes and standards in all designs to ensure compliance and safety., • Contribute to control panel layout and hardware design, optimizing for reliability, maintainability, and ease of installation., • Collaborate with engineering and software teams to integrate electrical designs with PLC programming and software systems., • Support turnkey control and software solutions by delivering accurate, high-quality electrical documentation., • Maintain a strong focus on attention to detail and customer satisfaction in all design work., • Participate in continuous improvement of design standards, templates, and processes within the engineering team. Essential Skills • Demonstrated electrical design and hardware design engineering experience., • Proficiency in AutoCAD design, with strong skills in creating detailed 2D electrical drawings., • AutoCAD Electrical experience, preferably with hands-on use in control panel and system design., • Experience in control panel layout and hardware design for industrial or material handling applications., • Some knowledge and understanding of control systems, including PLC-based architectures., • Basic understanding of electrical codes and standards, specifically UL508A and NEC., • Ability to interpret and develop 480V and 120V power schematics and I/O drawings., • Strong attention to detail and commitment to producing accurate, high-quality engineering documentation. Additional Skills & Qualifications • Experience with material handling systems, airport baggage handling systems, or similar automation environments is beneficial., • Experience in controls engineering, including exposure to PLC panels and associated control hardware, is a plus., • Familiarity with UL508A-compliant industrial control panels and NEC-based facility electrical systems., • Ability to work effectively within a multidisciplinary team that includes electrical engineers, PLC programmers, and software engineers., • Interest in growing within electrical engineering or bridging into adjacent fields such as PLC programming, software systems, or control panel build., • Strong sense of ownership over design quality and alignment with a performance-driven, customer-focused culture. Work Environment You will work in a modern office environment that was purpose-built for an engineering and technology-focused organization. The company has about 100 employees and approximately 50 engineers, creating a dynamic and collaborative atmosphere. The business specializes in controls upgrades and integration for airport baggage handling systems, material handling systems, and large industrial customers, and is recognized as a market leader in electrical engineering, PLC programming, software systems, and control panel build. The role is office-based with no field travel required for this position, as a dedicated PLC team handles most of the travel. The organization emphasizes turnkey control and software solutions, attention to detail, and a strong commitment to customer satisfaction. Employees benefit from a performance-oriented culture that encourages growth within current competencies or movement into adjacent technical fields. Free family medical insurance is provided, and team members take pride in being part of an efficient, quality-driven group that delivers some of the largest automation system deployments in the world. Job Type & Location This is a Permanent position based out of Louisville, KY. Pay and Benefits The pay range for this position is $76000.00 - $80000.00/yr. Company paid group health and dental and life insurance, $25k employee life insurance 104 hours of PTO 401k Workplace Type This is a fully onsite position in Louisville,KY. Application Deadline This position is anticipated to close on Jul 15, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Senior Geotechnical Engineer Cornerstone Geotech Services At Cornerstone Geotech Services, previously known as Greenbaum Associates, we specialize in providing exceptional geotechnical engineering services tailored to meet your unique project needs. With our extensive expertise in the field, we bring a wealth of knowledge and a commitment to excellence to every project we undertake. Our team of skilled professionals excels in performing comprehensive field and laboratory testing, observation, and inspection of various construction materials, including soils, aggregates, concrete, asphalt, and steel. We understand the critical role that accurate data plays in the success of your project, which is why we meticulously communicate with project stakeholders: including project managers, engineering technicians, client representatives, and contractor's representatives, to ensure a thorough understanding of project requirements and to deliver precise testing, observation, and inspection results. Position Overview: As a Senior Geotechnical Engineer, you will lead the technical execution of both routine and complex projects, from initial design through completion. Your responsibilities include planning, scheduling, and managing engineering tasks, supervising analysis processes, and conducting project reviews. You'll also oversee technical training, guide less experienced staff, and act as an Authorized Project Reviewer. In addition, you'll contribute to marketing and business development, ensure compliance with safety standards, and drive continuous quality improvement across all projects. Job Responsibilities: • Offer technical guidance essential for the successful execution of routine and intricate projects., • Conceptualize initial designs and investigative strategies for significant project phases or take overall responsibility for engineering work in moderately scoped projects., • Plan, schedule, and oversee engineering tasks, managing features like conflicting design elements., • Conduct project reviews, particularly for projects involving complex investigation techniques., • Supervise the analysis process and contribute to written reports for clients; provide tchnical assessments of reports., • Lead technical training sessions and make informed decisions based on cutting-edge technology issues., • Take charge of marketing, sales, and business development efforts., • Supervise less experienced engineers and technical support staff., • Act as an Authorized Project Reviewer., • Develop an understanding of project-related risks, adhere to company risk policies, and promote a safe work environment., • Lead safety initiatives for the team, ensuring compliance with safety rules and guidelines., • Advocate continuous quality monitoring and improvement on projects, overseeing adherence to quality standards. Minimum Qualifications: • Bachelor’s degree in Civil Engineering; Master’s Degree in Geotechnical Engineering or Civil Engineering with a geotechnical engineering focus preferred., • Minimum of 8 years of post-PE/responsible charge experience with geotechnical consulting firms., • Professional Engineer (P.E.) license in Kentucky, or ability to attain within 6 months., • Strong written and verbal communication skills., • Valid driver’s license with an acceptable violation history. Corporate Culture: At Cornerstone Geotech Services, we believe in a collaborative approach that is founded on the principles of Commitment, Excellence, and Integrity to our clients and our team members: Commitment to Staff and Clients • Treat others with respect, • Set and work toward common goals., • Communicate clearly and effectively to avoid misunderstandings. Excellence in Performance and Production • Provide value-added benefits., • Exceed client expectations., • Deliver services and products on time and budget. Integrity in Behavior • Deal with clients and associates fairly., • Practice honesty in all endeavors., • Focus on a servant attitude. The successful candidate will become an integral member of a team focused on living these principles daily. We look forward to welcoming the right member to our growing team!

Job Description Cornerstone Engineering, Inc. is an award-winning and fast-growing AEC firm that values commitment, excellence, and integrity. We have built our reputation by delivering successful projects to a broad array of clients in the public and private sectors, including with local and federal government. Cornerstone Engineering is seeking an experienced Senior Structural Engineer to join our dynamic engineering consulting team. As a Senior Structural Engineer, you will serve as a technical expert, working closely with our team to provide innovative solutions to our clients' engineering challenges. You will have the opportunity to interact with clients, contribute to business development efforts, and mentor junior staff. Responsibilities: • Serve as the lead engineer on projects, providing technical expertise and guidance to the project team., • Work closely with clients to understand their needs and develop creative solutions that meet their requirements., • Review and approve engineering designs, drawings, and specifications to ensure compliance with applicable codes and standards., • Provide mentorship and guidance to junior staff, helping them to develop their technical and professional skills., • Contribute to business development efforts, including proposal writing and client presentations. Requirements: • Bachelor's or Master's degree in Civil Engineering, Structural Engineering or a related field., • Minimum of 10 years of experience in structural engineering., • Professional Engineer (PE) license required., • Experience with design of various types of structures including, but not limited to, steel, concrete, masonry, and wood., • Knowledge of industry standards and codes, including ASCE 7, ACI, AISC, and IBC., • Excellent communication and interpersonal skills., • Ability to work independently and collaboratively in a team environment., • Strong project management skills. Required Skills and Abilities: • Excellent verbal and written communication skills. Able to communicate well using both technical and non-technical language and read with comprehension., • Conscientious and detailed., • Problem-solving skills., • Strong computer skills with basic knowledge of drafting software, BIM modeling software, and structural-based design software (AutoCAD, Revit, RISA, EnerCalc, etc.)., • Ability to work in a team environment, as well as individually with minimal supervision., • Familiar with construction and safety practices and willing to go on site., • Teachable and eager to develop professionally. Corporate Culture: At Cornerstone Engineering, we believe in a collaborative approach that is founded on the principles of Commitment, Excellence, and Integrity to our clients and our team members: Commitment to Staff and Clients • Treat others with respect, • Set and work toward common goals, • Communicate clearly and effectively to avoid misunderstandings Excellence in Performance and Production • Provide value-added benefits, • Exceed client expectations, • Deliver services and products on time and budget Integrity in Behavior • Deal with clients and associates fairly, • Practice honesty in all endeavors, • Focus on a servant attitude The successful candidate will become an integral member of a team focused on living these principles daily. We look forward to welcoming the right member to our growing team.

Job DescriptionSalary: WHY ULLIMAN SCHUTTE? We are Building a Better Environment! At our core, Ulliman Schutte is a group of extraordinary individuals. We recognize that our continued success is a direct result of the expertise, enthusiasm, and commitment of our employees. In addition to long-term stability Ulliman Schutte provides a comprehensive compensation plan and a generous benefits package. Ulliman Schutte is seeking Project Engineers in the Louisville, KY area who have a strong desire to learn, grow, and build something that matters! QUALIFICATIONS • BS in Civil, Mechanical, Environmental, Construction Engineering or related field from an accredited university in the United States., • Experience working successfully on teams., • Excellent verbal and written communication skills., • Strong interest in self-perform Water Infrastructure Construction. Project Engineer Daily Life • Planning and execution of day-to-day project operations. Like to be outside and not stuck behind a desk all day? You'll be based on exciting and fast-paced construction jobsites with a great combination of indoor and outdoor work environment., • Purchase, procure, and manage Vendor materials and Subcontractor work packages. Want responsibility? Our projects often include state of the art water treatment equipment and construction techniques worth millions of dollars., • Manage and maintain positive relationships with other engineers, managers, trades professionals, subcontractors and vendors. Like working with people? We work with a wide variety of individuals from all different backgrounds and perspectives - and it's great!, • Learn, grow, and be mentored by the industry's best and brightest. Want advancement potential? The majority of our full time engineers and managers started with US through our co-op and internship program, so a culture of training your teammates is an integral part of who we are and what we do. We are always vested in the success of our teammates and future leaders., • Ulliman Schutte is an industry leader because of our people. Are you a team player? Our teams work cohesively with a "get it done" attitude - and we have fun while doing it. LIFE WITH US At Ulliman Schutte, were an industry leader because of our people. We foster a work environment that emphasizes lasting relationships, encourages personal growth, and rewards hard work. Our team is driven by a sense of urgency, a commitment to quality, and a shared responsibility to manage risks and keep everyone safe. Above all, we aim to add value in everything we do. The individuals who thrive in our organization have a unique combination of ambition, intelligence, and a sense of adventure. They enjoy the hands-on nature of civil and mechanical engineering and construction and are energized by problem-solving in a fast-paced, team-oriented environment. Our future leaders embrace the opportunity to relocate, building new relationships and gaining valuable experiences along the way. At Ulliman Schutte, were not just about asking our people to "work safe" we build a proactive safety culture that strives to eliminate risk in every aspect of our operations. The results speak for themselves: Our safety record is outstanding, with incident rates well below national averages. Ulliman Schutte is a drug-free working environment. All offers are contingent upon compliance with Ulliman Schuttes pre-employment drug screening policies and E-Verify eligibility confirmation. We are proud to be an Equal Opportunity Employer who does not discriminate on the basis of race, color, sex, gender identity, sexual orientation, religion, national origin. EOE/AA M/F/VET/Disability

Job DescriptionSalary: RyconConstruction is an employee-owned company (ESOP) that provides construction management, general contracting, design-build, and program management services nationwide. An ENR Top 400 Contractor, ENR Top 100 Green Contractor, and BD+C Top 150 Contractor with nine offices,Ryconspecializes in new construction, renovations, and adaptive reuse projects. From large-scale developments to small, fast-track interior fit-outs,Ryconis equipped to deliver a comprehensive range of services across all project types.Ryconsportfolio includes projects in aviation, healthcare, higher education, industrial/warehouse, commercial, multi-unit residential, student housing, food service/dining, data centers/mission critical, retail, financial, self-storage, government/municipality, and LEED facilities. We have an in-house Architectural Finishes & Specialty Fabrication Division that ships/installs nationally. We are seeking an experienced Project Engineer for our Charlotte regional office, with the role based full-time in Louisville, KY. What you will do: • Working closely with PMs and Superintendents on the day-to-day operations of construction sites., • Reading and interpreting drawings and specifications., • Working with submittals, RFIs, and change management., • Assistingin contract buyouts., • Working with architects, engineers, and subcontractors., • Developing project schedules and phasing plans., • Attending and documenting project meetings., • Supporting projects with exposure to multifamily construction environments. What you will need to be successful: • Minimum of two (2) years experience in the commercial construction field, ideally including multifamily, paired with a degree in Construction Management, Engineering, Architecture, ora relatedfield., • A working understanding of construction cost accounting., • Computer skillsrequired: Procore, scheduling software (P6 preferred), and Microsoft Office Suite (Excel, Word, Outlook)., • Strongproficiencyusing the Procore project management system., • Abilityto develop andmaintainschedules in P6 is preferred but notrequired. AtRyconConstruction, Inc. we believe outstanding employees build the foundation necessary for excellence in business. It is with this belief that we are always looking for the best qualified and most talented employees to become part of our team.Ryconoffers advancement opportunities along with an excellent salary and benefits package thatincludes,medical, dental, vision, ESOP (Employee Stock Ownership Plan) and 401(k). Qualified candidates willbe requiredtosubmit toa background screening upon acceptance of an offer. RyconConstruction Inc. is an Equal Opportunity Employer. Attention: All third-party agencies,headhuntersand recruiters RyconConstruction is not accepting candidate submission by unsolicited third parties to anycompanyemail address. All unsolicited candidates will be rejected, andRyconConstruction will not be responsible for any fees associated with unsolicited candidates, nor will a contractual relationship be formed by the submission.RyconConstruction will not beobligatedand will not under any circumstances pay any fees to said third party candidates in an unsolicited manner. RyconConstruction only forms contracts with recruiters with whom we have an established business relationship and with whom we have a signed agreement in place. All contact withRyconConstruction from third parties must be through our Human Resources department. Outside recruiters are not to contact hiring managers directly. Any contact made outside ofRyconsHuman Resources department by a third party will cancel any future business relationship between the third party andRyconConstruction.

Job Description About Technology Plus: Since 1995, Technology Plus has been a trusted technology partner for businesses, offering expertise in IT, Telecom, Cabling, Security, and Audio/Visual services. We pride ourselves on delivering personalized service that empowers our clients to focus on what they do best. As we continue to evolve, we're looking for a Systems Engineer to join our dynamic team! Why You'll Love Working Here: • Family-Oriented Culture: We believe in work-life balance and foster a supportive, collaborative environment., • Comprehensive Benefits: Enjoy health benefits, paid time off, retirement plans, and other perks., • Growth Opportunities: With nearly three decades of growth, we offer opportunities for professional development., • Team Support: We celebrate wins together and promote a culture of recognition and teamwork. Position Overview: We are seeking a Tier III Systems Engineer who thrives in a collaborative environment and values meaningful interactions with both clients and internal teams. As a Tier III Systems Engineer, you'll play a key role in maintaining and enhancing our technology infrastructure. This position offers opportunities for professionals at different stages of their careers. You'll work alongside cross-functional teams, participate in IT projects, and ensure the smooth operation of our technology systems. This is a full-time position (Monday to Friday, 8 AM - 5 PM) based at our office in Louisville, KY. The physical environment requires frequent indoor work, but the work location may vary between office, warehouse, and other locations. Occasional outdoor work may also be required. Key Responsibilities: Level 1 (Entry-Level) • User Support: Provide first-level support to end-users, troubleshoot hardware/software issues, and assist with general inquiries., • System Monitoring: Monitor network and system performance and respond to alerts., • Documentation: Maintain accurate records of hardware, software, and network configurations., • Hardware Maintenance: Assist with basic hardware installations, repairs, and upgrades., • Software Updates: Assist in software installations, updates, and patches., • Training: Participate in training programs to enhance IT knowledge and skills. Level 2 (Intermediate-Level) (In addition to Level 1 responsibilities) • Network Administration: Manage and configure network devices such as switches, routers, and firewalls., • Server Maintenance: Administer and maintain server infrastructure, including hardware, virtualization, and operating systems., • Security: Assist in implementing security protocols, such as firewalls, antivirus, and intrusion detection., • Backup and Recovery: Manage data backup and recovery solutions., • Project Support: Collaborate on IT projects such as system upgrades, migrations, and infrastructure expansion. Level 3 (Senior-Level) (In addition to Level 1 & 2 responsibilities) • Architecture Design: Design and implement complex IT infrastructure solutions., • Advanced Troubleshooting: Investigate and resolve advanced technical issues., • Automation: Develop automation scripts and tools to improve system efficiency., • Capacity Planning: Analyze system performance and plan for scalability. What We're Looking For: • Bachelor's degree in Information Technology, Computer Science, or a related field (preferred)., • Relevant certifications (CompTIA, Cisco, Microsoft, AWS, etc.), depending on the role., • Strong problem-solving skills and the ability to work both independently and as part of a team., • Excellent communication and interpersonal skills., • A passion for staying up to date with the latest IT trends and technologies. Why Join Technology Plus? At Technology Plus, we foster a welcoming and collaborative team environment. You'll be part of a company that values innovation and creativity, offering opportunities for growth and development. Join us in making a real impact on our clients and the community! Ready to Apply? If you're organized, detail-oriented, and excited about the opportunity to engage with clients, we want to hear from you! Apply today and become part of the Technology Plus family. Job Posted by ApplicantPro

Job Description Hiring a Field Procurement Engineer / Procurement Administrator Job Description This role supports industrial construction projects by managing onsite purchasing, coordinating materials and equipment, and working closely with field teams to ensure that all required items are available on time. The position focuses on local sourcing, urgent and same-day purchasing, and effective collaboration with site personnel and vendors to keep construction activities running smoothly and cost-effectively. Responsibilities • Handle daily onsite purchasing needs for tools, materials, consumables, and equipment rentals to support construction activities., • Source materials and equipment from local vendors and national suppliers, executing urgent and same-day purchases when required., • Build and maintain strong working relationships with local suppliers and rental companies to support ongoing and future project needs., • Compare vendor pricing, availability, and delivery options quickly to secure the best value and meet project timelines., • Arrange logistics for deliveries and pickups, ensuring materials arrive at the jobsite or warehouse when and where they are needed., • Track material deliveries, verify quantities, and ensure accuracy against orders and project requirements., • Coordinate with warehouse and site storage teams to organize materials and prevent shortages that could delay construction., • Work closely with the superintendent, field engineers, and construction team to understand the daily work plan and anticipate material and equipment needs., • Prioritize purchasing requests based on urgency, project impact, and input from internal team members., • Monitor and track both small-ticket and bulk purchases, maintaining accurate records of all transactions., • Keep detailed records of receipts, invoices, and vendor information to support cost control and project accounting., • Support budget tracking and reporting by providing timely and accurate purchasing and cost information., • Maintain purchase logs and documentation, and assist with purchase order creation as needed., • Support the accounting team with reconciliation of purchases, invoices, and vendor statements., • Respond quickly to urgent and time-sensitive requests, including same-day or same-hour needs for materials and equipment., • Collaborate effectively in a diverse onsite environment and communicate clearly with internal stakeholders and external suppliers., • Ask clarifying questions and gather detailed information from internal team members to determine purchasing priorities and requirements. Essential Skills • 2–5 years of experience in construction, MEP, or field procurement roles., • Proven experience working onsite on construction projects and supporting field operations., • Hands-on experience with procurement and purchasing processes, including purchase orders and vendor coordination., • Ability to manage both material purchasing, such as gaskets and other construction components, and equipment rentals., • Familiarity with construction materials including piping, fittings, valves, electrical components, and HVAC materials., • Strong documentation skills for maintaining purchase logs, receipts, invoices, and vendor information., • Ability to support budget tracking, cost control, and financial reconciliation for project purchases., • Ability to work effectively in a diverse environment and collaborate with field engineers, superintendents, and construction teams., • Familiarity with U.S. suppliers such as large home improvement retailers and industrial suppliers, including experience sourcing from these vendors., • Experience working with equipment rental companies and coordinating rental agreements, deliveries, and returns., • Experience purchasing both locally and internationally, with an understanding of when international sourcing is appropriate based on schedule and cost., • Ability to build and maintain strong relationships with local vendors to support current and future projects. Work Environment This is an onsite role based in Jeffersonville, Indiana for approximately one year, supporting an industrial construction project. After this project phase, the role will transition to a new facility location in Shelbyville, with the potential for remote work once the project is completed. The position operates directly on active construction sites, working closely with superintendents, field engineers, and construction teams in a fast-paced, schedule-driven environment. Job Type & Location This is a Permanent position based out of Jeffersonville, IN. Pay and Benefits The pay range for this position is $70000.00 - $100000.00/yr. 3 weeks PTO, 5 sick days. health insurance, 3% 401k match Workplace Type This is a fully onsite position in Jeffersonville,IN. Application Deadline This position is anticipated to close on Jul 7, 2026. About Aston Carter Aston Carter provides world-class corporate talent solutions to thousands of clients across the globe. Specialized in accounting, finance, human resources, talent acquisition, procurement, supply chain and select administrative professions, we extend the capabilities of industry-leading companies. We draw on our deep recruiting expertise and expansive network to meet the evolving needs of our clients and talent community with agility and excellence. With offices across the U.S., Canada, Asia Pacific and Europe, Aston Carter serves many of the Fortune 500. We are proud to be a ClearlyRated Best of Staffing® Platinum Award winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email astoncarteraccommodation@astoncarter.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Who We Are: At Winston, we believe quality is not something that gets inspected into a product after it is built. Quality is engineered into the product from the beginning and reinforced throughout the manufacturing process. We are looking for a Quality Engineering Manager who gets excited about root cause analysis, reliability improvement, product design influence, and continuous improvement. Summary: The Quality Engineering Manager is responsible for improving product reliability, manufacturing quality, customer satisfaction, and operational performance through engineering-based problem solving and data-driven continuous improvement. This role partners closely with the Engineering Manager and Manufacturing Operations Manager to influence product design, manufacturing processes, testing methodologies, reliability validation, warranty reduction, and quality strategy. Basically, Engineer Quality Into Everything We Do! What Success Looks Like Success is measured by reduced warranty costs, improved reliability, higher first pass yield, fewer customer complaints, reduced scrap and rework, and permanent elimination of root causes. Key Qualifications: • Bachelor’s degree in an Engineering or related field., • 5+ years’ of experience in Engineering or Quality Management role in a manufacturing environment., • Critical proactive thinking skills., • Strong communication skills with the ability to work collaboratively across departments., • Detail-oriented mindset with a commitment to maintaining high-quality standards., • Fundamental understanding of electrical, mechanical, and process engineering disciplines, which are directly related to the food service industry, recommended. Responsibilities: Quality Leadership & Strategy • Champion product quality, reliability, safety, regulatory compliance, and customer satisfaction throughout the product lifecycle. • Serve as the organization's technical leader for quality engineering, driving a culture focused on prevention rather than detection., • Continually improve Winston's Quality Management System (QMS) to ensure quality excellence in both customer experience and manufacturing operations., • Partner closely with the Engineering Manager and Manufacturing Operations Manager to align quality objectives with business goals and operational priorities. Product Quality & Reliability Engineering • Influence product design decisions to improve reliability, manufacturability, serviceability, and overall product performance., • Participate in product development, design reviews, risk assessments, validation testing, and New Product Introduction (NPI) activities to ensure quality is engineered into products from concept through launch., • Champion Design for Quality principles and ensure lessons learned from manufacturing, warranty, and customer feedback are incorporated into future product designs., • Lead investigations into product failures and field performance issues to drive continuous improvement. Root Cause Analysis & Continuous Improvement • Lead cross-functional root cause investigations related to warranty claims, customer complaints, manufacturing defects, supplier issues, and product reliability concerns., • Champion structured problem-solving methodologies including 8D, A3, 5 Why, Fishbone Analysis, FMEA, and other quality engineering tools., • Drive the Corrective and Preventive Action (CAPA) system, including action tracking, verification of effectiveness, and prevention of recurrence., • Ensure corrective actions address systemic root causes rather than symptoms., • Facilitate cross-functional improvement teams to solve complex quality and reliability challenges. Quality Analytics & Business Intelligence • Lead analysis of warranty, manufacturing, supplier, service, and customer quality data., • Identify trends, recurring issues, and emerging risks through data analysis and statistical methods., • Develop dashboards, KPIs, and reporting systems that provide actionable insights to leadership teams., • Utilize quality metrics to prioritize improvement efforts and measure effectiveness of corrective actions., • Drive reduction of Cost of Poor Quality (COPQ), warranty expense, scrap, rework, and customer quality escapes. Manufacturing Process Quality • Learn and understand all manufacturing processes to ensure products are built to the highest quality standards. • Partner with Manufacturing Operations to improve process capability, reduce variation, and eliminate sources of defects., • Lead development and implementation of Control Plans, process controls, inspection strategies, and error-proofing solutions within each production area., • Evaluate and improve testing methodologies to increase defect detection while reducing non-value-added inspection activities., • Drive improvements in First Pass Yield (FPY), throughput, and overall manufacturing quality performance., • Support continuous improvement and Lean Manufacturing initiatives throughout the organization. New Product Introduction (NPI) • Serve as the quality subject matter expert for the NPI process., • Ensure quality requirements, validation plans, control strategies, and risk assessments are incorporated into all new product launches., • Partner with Engineering to successfully transition products from development into manufacturing while minimizing quality risks. Customer & Supplier Quality • Support customer quality needs, including periodic travel to customer sites, field investigations, and manufacturing partners as required., • Partner with suppliers to improve quality performance, process capability, and corrective action effectiveness., • Lead supplier quality investigations and improvement initiatives when required., • Support customer issue resolution efforts by providing technical expertise and root cause analysis. Team Leadership & Development • Lead, coach, and develop Quality Engineers, Inspectors, and Technicians., • Support training and development of manufacturing team members, supervisors, and managers on quality systems, problem solving, and quality engineering principles., • Promote quality ownership throughout the organization by building technical problem-solving capabilities across all departments., • Foster a culture where quality is everyone's responsibility and continuous improvement is a daily expectation. What the culture is like at Winston: While we recognize that profits are a necessity for any business, we do not make decisions based on just increasing the bottom line. We are genuine in our appreciation for each team member’s contribution and look to make Winston a better place to work every day. With us prioritizing our culture, we love to grow from within, but still understand the need to continue to gain knowledge from outside. We are far from perfect, but we focus daily on our vision of wanting to “make money and have fun doing it.” What are the unique demands: Physical Demands: • Varied Work: Mostly Sedentary with frequent sitting, walking, and/or standing. Occasional requirement to lift/carry up to 50# or to push, pull or otherwise move finished products >100#. Travel: • Limited Travel: Less than 25% Domestic and/or International (all transportation types required)

Job Description CTL Engineering is hiring a Geotechnical Engineer (EIT or PE)! CTL Engineering (www.ctleng.com) is an award winning, full service consulting engineering firm with (15) locations across OH, IN, WV, KY, NC, SC, and VA with a rich history over our (99) years in business. We provide civil/site design and land surveying, environmental, geotechnical, construction administration & inspection, accident reconstruction, roofing/building envelope, A/V system design, troubleshooting & installation, transportation design (bridge/roadway), and specialized testing services to the construction industry. We are looking for a Geotechnical Engineer (EIT or PE) who will play a key role in performing geotechnical explorations and investigations for our clients. You’ll leverage your expertise and creative problem-solving skills while collaborating closely with institutions/municipal agencies, Architects, Engineers, Developers, and project teams to deliver customized geotechnical studies, reports, and solutions. From initial concept development to final execution, this role will guide projects through every stage of the land profile evaluation process, ensuring seamless integration and optimal results. If you are passionate about staying ahead of industry trends, enjoy problem-solving, and have a creative approach to the geotechnical field, we want to hear from you! This is more than a job posting… it's an invitation to bring your expertise to a company where innovation and passion converge seamlessly. Highlights: • Interesting projects ranging from infrastructure, industrial, commercial, and “one-off”/unique engineering., • Projects are located in north-central Kentucky/southern Indiana – generally within a 60-90 mile radius of the Shelbyville/east Louisville office., • This role will be at least 30-40% in the field, so some overnight travel (a couple of nights a month) is very normal/to be expected., • A company vehicle can be provided or reimbursement for personal vehicle use., • This role will be based out of our Shelbyville (east Louisville) office. Responsibilities: • Performing geotechnical explorations, site characterizations, and risk evaluation on developments., • Training and supervision of lab technicians (based on experience), maintenance of quality reviews and certifications, management of equipment inventory and calibration, client marketing and proposal preparation., • Ability to work independently on broad projects with oversight/supervision by the Service Line Manager., • Providing direction on a project-to-project basis – i.e. preparing lab testing assignments, reviewing documents, and testing results for content and accuracy., • Preparing geotechnical engineering reports., • Reviewing soils laboratory test results., • Assisting in planning and the execution of subsurface investigation programs - including the understanding of project design plans, locating test borings at project sites, coordinating underground utility clearance., • Monitoring and enforcing quality control standards and specifications. Knowledge, Skills and Abilities: • Strong communication skills., • Ability to read design drawings., • Ability to meet schedules., • Experience with common geotechnical software or be able to utilize software with minimal training., • Self-motivated, reliable, quality minded, and detail oriented. Minimum Qualifications: • 0-4+ years of experience in consulting engineering on various civil projects, • New grads are encouraged to apply!, • EIT credentialing is a strong plus, but the ability to get EIT and PE is required (must have ABET accredited degree) Education: • BS Degree in Civil Engineering, • Master’s Degree in Geotechnical Engineering or Engineering Geology is a plus, but not required. Physical Requirements: • Must be able to lift and carry up to 50 lbs., • Must be willing to travel, and be physically able to maneuver on open terrain. . Benefits: • CTL Engineering offers a competitive compensation and benefits package including medical, life, and disability insurance, paid time off, an award-winning ESOP (Employee Stock Ownership Plan), and a 401K plan. CTL Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionDescription: JOB TITLE: Controls Engineer II REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Controls Engineer II is responsible for the advanced support of all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working with minimal supervison. A successful Controls Engineer II has an advanced level of knowledge and understanding of commonly used controls engineering concepts, PLC programming and practices with an ability to lead/mentor entry level Controls Engineers as well as a willingness to attend training to further build their knowledge and abilities to advance to the next level. ESSENTIAL FUNCTIONS: • Understand AC/DC control systems with the ability to read component cut sheets., • Able to use computer software for design engineering and PLC programing., • Capable of trouble shooting a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Designing and developing layouts for electrical circuits or systems for power and control distribution., • Support the Systems Checklist for projects during field installation and startup., • Ability to develop electrical diagrams with varying levels of efficiency while being able to locate and correct mistakes found in electrical diagrams by themselves and others., • Ability to take the controls lead on project teams., • Capable of creating functional system test plans for use in field commissioning and ability to contribute written descriptions of system operations for technical documents., • Communicate with other team members effectively and keep Administrative Coordinator advised of schedule; checking and using voicemail and email diligently; and maintaining the team relationship., • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging and success driven culture, • Travel up to 50% or more PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time when in office, • Standing and walking for prolonged periods of time when at a jobsite, • Climbing may be required when working at a jobsite, • Repetitive typing/data entry, • Lifting up to 50 pounds WORK SCHEDULE: This position works in office when not traveling to job site. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements of the project as needed. It is the policy of Sortation Labs, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, Sortation Labs, LLC will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Advanced proficiency in several programming languages and control device networks for PLCs., • Ability to read and understand written specifications, as well as contract drawings and?be capable?of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, and manufacturing., • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs., • Experience Required:, • PLC programming, debugging and commissioning, • Plan/hardware design, • AutoCAD (AutoCAD E desired), • Microsoft Office Suite, • Basic knowledge of electrical equipment and local building codes such as UL508a, NEC and NFPA, • Experience Preferred:, • Hands-on mechanical and electrical capabilities, • Troubleshooting, • Material Handling, • Understanding VFDs, Servos, sensors and Vision Systems. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 3-5 years in the field or related area., • Legally authorized to work in the United States, • Ability to obtain facility security clearance as needed

Job Description POSITION SPECIFICATION Position: Electrical Engineer III Department: Manufacturing (MFG) Reporting Relationship: Senior Project Manager, MFG COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit www.kfi-eng.com. POSITION OVERVIEW & RESPONSIBILITIES The Electrical Engineer III plays a key role in the successful execution of projects from start to finish for our MFG group. This individual will provide technical and engineering excellence, as well as successful delivery of work to our customers. The Electrical Engineer III is responsible for a high level of customer satisfaction by ensuring expectations are clearly communicated and managed – both externally and internally. The successful candidate will also contribute to a dynamic team environment by being proactive, communicating clearly to all stakeholders, and modeling a highly collaborative working environment. This person will also actively support the business development process, through the writing of proposals and meeting with prospective and current customers. This Electrical Engineer III will be self-directed but thrive in an environment where consultation leads to superior differentiators. The successful candidate will have a pragmatic and applied approach, while at the same time bringing a creative examination of customer needs and solutions. Specific responsibilities will include, but not be limited to, the following: • Assists with the design of one or more of the following: power distribution systems (primary requirement), size motor feeders and starters., • Supports the design of building power and lighting systems. Includes the design of special systems, such as ground fault, lightning protection, emergency generator, UPS, etc., • Prepares engineering documents and equipment specifications to meet contracted scope of work and to ensure application of Electrical Engineering Principles., • Assists with performing voltage drop and short-circuit calculations. Perform arc fault analysis., • Coordinates work with other departments and project team members as well as contractors., • Other duties as assigned. QUALIFICATIONS Required • Bachelor’s degree in Electrical Engineering., • Must be legally authorized to work in the US on a permanent basis without the need for work sponsorship now or in the future., • Minimum of 8 years’ electrical engineering experience following graduation., • Professional Engineering (PE) certification or willingness to pursue this designation., • Project experience and a working knowledge of Electrical design for building projects., • Knowledge in both Revit and AutoCAD., • Strong electrical design expertise across various industries and processes., • Comprehensive understanding of Electrical, Mechanical, Civil and Structural Engineering construction practices., • In-depth knowledge of industry codes and standards (NEC, NFPA, NESC, ANSI/IEEE, etc.)., • Experience in infrastructure design for manufacturing facilities., • Demonstrated leadership and ability to influence stakeholders., • Proven ability to build strong client relationships and collaborate effectively with cross-functional teams., • Exceptional interpersonal skills to enable effective interaction with Designers, Engineers, and Project Managers., • Ability to establish rapport and credibility with customers and other stakeholders., • Supervisory or people-management experience., • Effective meeting management skills., • Strong problem-solving and analytical skills., • Attention to detail and ability to manage multiple tasks., • Excellent verbal and written communication skills., • Adaptable and agile, responsive to quick changes in direction., • Knowledge of computer technology and specific areas of application, including MS Office., • Travel: May include up to 25% domestic travel. Working Conditions • Some work locations will feature the tough terrain typical of construction sites or require lifting or moving field testing equipment. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Takes responsibility for own actions. Business Focus • Demonstrates agility, adapts well to changes., • Works well under pressure., • Meets commitments to internal/external customers. Project Execution • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Other duties as assigned. Demonstrates Respect for Others • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Adapts communication style and method based on audience and situation. Team Player • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Paid Volunteer Time Off, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave, • Voluntary benefits offered include life, accident, critical illness coverage Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer – Veterans and Disabilities

Job Description PURPOSE Automation Technicians will be responsible for supporting Project Managers and System Engineers with creating, installing, and commissioning of PLC/HMI/SCADA based systems as well as network and device integration work. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Assist with project programming, start up, and commissioning of new PLC/HMI/SCADA control systems, service and maintenance of existing installations, fault diagnoses, hardware repairs, and programming bug fixes and alterations on customer sites, • Assist with diagnosing and resolving technical problems on jobs and provide appropriate reports to Project Management or Operations Leaders via email, SharePoint, OneDrive, or other repository applications, • Attend project kickoff and turnover meetings with Project Managers to gain knowledge of project estimate and scope and final project completion documentation, • Organize and maintain control submittal project redlines and submit to design engineer at project end for as built drawing package creation after review from Team Lead or Senior Engineer, • Work with other technicians to develop and share technical solutions, • Actively participate in technician training to maintain technical expertise on new products, tools, and integration through continuing education initiatives MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Minimum of three years of experience with PLC/HMI control system preferred, • Or A.A.S degree specialized in Robotics, Automation, Technology or in process of completion MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Working knowledge of at least one PLC software (i.e. Rockwell RSLogix, Studio 5000, CCW, Modicon Unity Pro, Mitsubishi, or many others), • Working knowledge of at least one HMI software (i.e. Rockwell FactoryTalk View or Wonderware InTouch, or many others), • Working SCADA knowledge preferred but not required (i.e. Ignition, Factory Talk View SE, Optix, GE iFix, Ecostruxure Power Operations or SCADA, or many others), • Knowledge of common Windows Office applications and Repositories (i.e. OneDrive, SharePoint, GIT), • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both verbal and written, • Ability to travel to customer locations for overnight work approximately 25% ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • Laptop computer Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description Senior Automation Engineer Department: Automation FLSA Designation: Non-Exempt PURPOSE The Senior Automation Engineer provides technical start-up, checkout and programming for Building Automation and Manufacturing Control Systems. Maintain and grow the “Client for Life” concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components., • Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power., • Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc., • Uploading, downloading, and modification of control software and programs., • IP network configurations to include Stratix and Cisco switch configurations, setting up IP addresses, subnet masks, MAC addresses and instance numbers., • Create and troubleshoot automation networks and communication protocols., • Identify and troubleshoot complex HVAC and Electrical automation systems including but not limited to psychometrics, refrigeration, building pressure controls, life safety systems, EPMS, steam heating, humidification and de-humidification, central heating and cooling systems, production lines, servos systems, robot cells, and other production environments., • Map control points into supervisory controller and add alarms and history extensions to supervisory controller points., • Map control points into the graphical front end and link points to graphics., • Create Automation System graphics and dashboards that tie into a SCADA system., • Understand construction and project schedules, and manage QA/QC checklists and commissioning logs, • Interpret Sequence Of Operations (SOO) and apply to program logic., • Read and write code using IEC 61131-3 ladder logic, structured text, and function block programming., • Manage medium to large projects., • Lead, coach, mentor, train and delegate tasks to Automation Technicians and Automation Engineers, • Assist with Tier III Business Development Pursuits., • Assist with the development of Core Process and Standards for the Automation Business Unit., • Travel to job sites is required MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Bachelor’s degree in engineering related field or equivalent work experience, • 7+ years of Automation related field and engineering experience, • Knowledge of common Microsoft Office applications (Excel, Word, Outlook), • Knowledge of Microsoft SQL or other database applications preferred, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Knowledge of construction site safety and a high awareness of surroundings CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Ability to perform independently., • Strong interpersonal skills with effective verbal and written communication., • Ability to follow instructions and meet commitments., • Value and support company Core Focus and Values., • Demonstrated honesty, integrity, sound reasoning, good judgment and values. Lead by example, while maintaining strong internal and external relationships at all levels., • Prioritize and balance long-term goals with immediate tasks., • Ability to listen effectively, value other’s opinions of and acknowledge contributions., • Possess strong communication skills and the ability to collaborate effectively with various stakeholders, including our electrical team members and project managers., • Capability to collaborate efficiently with project team members to resolve issues in a timely manner. ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk and working on a computer, • Must be able to lift 75 pounds occasionally, • May have occasional visits to a job site which would require periods of standing, walking and/or climbing stairs EQUIPMENT/TOOLS • Laptop PC, • Electronic Multimeter, • Magnehelic, • RS-485 and RS-232 Serial Adapters, • Hand tools/Light power tools, • Product Manufacturer Software, • Ladders and Lifts, • Oscilloscope, • Wireshark, • Procore, BIM 360, and other Construction Management Softwares, • Computer systems: Windows, Linux, Command Line Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description Come work for OHM Advisors, the Community Advancement firm. With the singular mission of Advancing Communities, our diverse 800+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying, and construction engineering. We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem solving, design, and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward— advancing the whole community today and well into the future. What You Will Contribute to OHM Advisors As a Site Design Project Engineer, you will lead civil engineering design efforts for diverse land development projects, primarily serving private sector clients. You will collaborate closely with Project Managers to develop and execute tailored scopes of services that align with client needs and objectives. Your role as a key decision-maker throughout the project lifecycle will involve guiding the process from conceptual design to construction, ensuring high-quality deliverables and successful project outcomes. Your expertise and leadership will be essential in fostering strong client relationships and driving innovative solutions in site design. Your Responsibilities Project Management: • Provide guidance to the PM regarding anticipated tasks and relative effort., • Achieve project success, adhering to work plans, schedules, and budgets., • Oversee design team and facilitate QA/QC. Technical Expertise: • Planning and design of new construction and redevelopment sites., • Preparation of engineering plans, specifications, reports, studies, technical memoranda, and other project documentation., • Regulatory knowledge within the project’s jurisdiction., • Familiarity with Zoning & Land Use Codes, Subdivision Regulations, and Design Standards, • Stormwater management, quantity/quality controls. Understanding of Best Management Practices for design and construction., • Functional knowledge of sanitary sewer, water, power, gas, and telecom utilities., • Grading design for mass earthwork, roadways, parking lots, building pads, sidewalks, and other site improvements. Understanding of ADA & PROWAG design requirements., • Competency in Land Surveying practices. Ability to interpret plats, deeds, easements, legal descriptions, etc., • Expertise with topographic models of existing and proposed conditions., • Proficiency with AutoCAD, Civil3d, hydrologic/hydraulic modeling programs, AutoTurn and similar civil engineering design software. Teamwork and Leadership: • Work collaboratively with team of internal staff, external consultants, and regulatory authorities., • Mentor staff and contribute to organizational growth., • Communicate effectively with clients, consultants, contractors, and other stakeholders. Requirements • Bachelor's or better in Civil Engineering or related field., • 5-10 years of experience in Site Design, Civil Engineering, or Land Development., • Kentucky PE license is required. Indiana or Tennessee PE is a plus., • Design experience for private development projects in residential, commercial, or industrial markets., • Experience preparing construction documents including plan drawings, specifications, bid documents, and cost opinions., • Ability to engage with clients, internal staff, contractors, and community officials., • Experience with state agencies and/or DOT specifications. Benefits At OHM Advisors, our people are our greatest asset. We're committed to providing a supportive and rewarding workplace that fosters personal and professional growth. That's why we offer a competitive benefits package designed to meet your unique needs. Benefits: • BCBSM Medical, Dental and Vision, • Company Profit Sharing, • Flexible Spending & Health Savings Accounts, • 401(k) retirement savings plan with employer matching contribution, • Paid professional association membership, • Tuition & Certification Expense reimbursement, • Volunteer Service Leave, • 100% Employer-Paid Life Insurance, • Short & Long-Term Disability Options Career Advancement & Enrichment Programs: • Voluntary Wellness Program, • OHM Grad School, • OHM University You can read more about each of these programs on our website. OHM Advisors is an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #LI-SR1

Job Description About Us Join a talented team of engineering professionals at Vogt Power International Inc. Vogt is based in Louisville, KY and specializes in the design, manufacture and supply of equipment and solutions to the power generation industry. We are an industry leader in heat recovery steam generators (HRSGs) with both domestic and international customers. Position Summary Vogt Power International is looking for a talented Pipe Stress Engineer to work on a multi-discipline project team to analyze and review the ASME pressure parts and supports associated with our Heat Recovery Steam Generators. Essential Functions/Responsibilities · Perform flexibility analyses for piping systems to ensure stresses are within code allowable limits · Develop piping stress models which include all physical properties of the piping, its contents, and insulation · Locate and design pipe supports and restraints which maintain static equilibrium and minimize stresses · Work directly with our design group to ensure the detailed support designs are created accurately and on schedule · Work directly with Piping Designers, Structural Engineers, Product Engineers, Project Engineers, Lead Designers, and others to ensure pipe routing and equipment access is optimized and that loads are properly addressed where piping interfaces with equipment or supports interface with the main structure · Use hand calculations, internal spreadsheets, programs, or other tools to determine or validate miscellaneous expansions, stresses, loads, and support designs · Perform dynamic analyses to determine loads originating from safety valve opening, steam turbine trip, or other dynamic events · Create specifications, lists, requisitions, and review quotes to support the procurement of pipe support material · Communicate and coordinate with VPI’s customer (or customer’s representative) to ensure VPI’s piping scope interfaces properly with the customer’s piping scope · Provide organized and well written reports to describe assumptions, steps taken, and results from work performed · Provide leadership by learning, developing, and coordinating new techniques, standardizing procedures, and providing technical instruction and mentoring to department staff · Participate in project team and client meetings, as needed · Follow all company and department ISO procedures and work instructions · Perform other duties as assigned To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Requirements · Bachelor of Science in an engineering related field with emphasis on statics, dynamics, stress analysis and/or Finite Element Analysis · Two years of experience in Heat Recovery Steam Generators or other related piping experience preferred · Experience in operating Caesar II or AutoPipe piping analysis software preferred · Proficiency with Microsoft Excel · Prior knowledge of ASME Boiler & Pressure Vessel Codes, with an emphasis on B31.1 is preferred · Good communication skills and ability to work well in a team environment To provide greater transparency to candidates, we include base pay ranges for all US-based job postings that encompass all potential locations and levels for the open position. Our base pay ranges are set based on the function, discipline, level and regional location and are benchmarked against companies in the same or similar industry. Final offers may vary based on multiple factors, including education, depth and relevance of work experience, relevant licenses and certifications, and may vary from the amounts listed in the job posting. The base pay range for this Pipe Stress Engineer role is $75,000 - $95,000 annually.

Job DescriptionDescription: Come grow with us! It is an exciting time within our company as we expand the services offered to our customers. At ControlTouch Systems, our goal is to be “The BEST in Baggage”. We are seeking innovative-minded, qualified candidates to join our team as we continue to do just that! We design and support systems for airports that get baggage to passengers at destinations all over the world safely, accurately, and efficiently. Check out the job description below and apply today! JOB TITLE: Controls Engineer III REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Controls Engineer III is responsible for leading all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working independently. A successful Controls Engineer III has an expert level of knowledge and understanding of the full scope of controls engineering practices, theories, and PLC programming to implement the controls for a project from concept to completion. The Controls Engineer III serves as a subject matter expert and resource for their team and provides coaching and guidance while working at a job site or in-office collaboration. To keep their knowledge up-to-date, the Controls Engineer III will attend training in the latest controls technology and have the ability to share that knowledge with less experienced controls engineers as well as work collaboratively with the Engineering Manager to provide insight on the latest advancements in the field of controls engineering to implement new standards for the company. ESSENTIAL FUNCTIONS: • Expert understanding of AC/DC control systems., • Use of computer software for design engineering and PLC programing., • Capable of trouble shooting a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Designing and developing layouts for electrical circuits or systems for power and control distribution., • Develop/create electrical diagrams with expert level of efficiency., • Ability to locate and correct mistakes in electrical diagrams developed by others on the team and use this information as a training opportunity for others to foster the continuous improvement of their skills. (Transfer of knowledge), • Be the controls lead and manage other engineers on project teams., • Capable of creating functional system test plans for use in field commissioning and provide written descriptions of system operations for technical documents., • Communicate with other team members effectively and keep Administrative Coordinator advised of schedule; checking and using voicemail and email diligently; and maintaining the team relationship., • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging and success driven culture, • Travel up to 50% PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time, • Repetitive typing/data entry, • Lifting up to 50 pounds WORK SCHEDULE: This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Proficient in several programming languages and control device networks for PLCs with good aptitude for learning the programming for new/additional systems., • Ability to read and understand written specifications, as well as contract drawings and be capable of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, water and wastewater systems and manufacturing., • Ability to check diagrams to correct errors and use that information as a training opportunity/transfer of knowledge to foster a continuous improvement environment to further develop the skills of less experienced controls engineers, • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 6+ years in the field or related area., • Experience Required:, • PLC programming, debugging and commissioning, • Plan/hardware design, • AutoCAD (AutoCAD E desired), • Microsoft Office Suite, • Basic knowledge of electrical equipment and local building codes such as UL508a, NEC and NFPA, • Experience Preferred:, • Hands-on mechanical and electrical capabilities, • Troubleshooting, • Material Handling specifically in the Baggage Handling Industry, • Understanding VFDs, Servos, sensors and Vision Systems., • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodation for qualified individuals with disabilities.

Job Description About Technology Plus: Since 1995, Technology Plus has been a trusted technology partner for businesses, offering expertise in IT, Telecom, Cabling, Security, and Audio/Visual services. We pride ourselves on delivering personalized service that empowers our clients to focus on what they do best. As we continue to evolve, we're looking for a Systems Engineer to join our dynamic team! Why You'll Love Working Here: • Family-Oriented Culture: We believe in work-life balance and foster a supportive, collaborative environment., • Comprehensive Benefits: Enjoy health benefits, paid time off, retirement plans, and other perks., • Growth Opportunities: With nearly three decades of growth, we offer opportunities for professional development., • Team Support: We celebrate wins together and promote a culture of recognition and teamwork. Position Overview: We are seeking a Tier II Systems Engineer who thrives in a collaborative environment and values meaningful interactions with both clients and internal teams. As a Tier II Systems Engineer, you'll play a key role in maintaining and enhancing our technology infrastructure. This position offers opportunities for professionals at different stages of their careers. You'll work alongside cross-functional teams, participate in IT projects, and ensure the smooth operation of our technology systems. This is a full-time position (Monday to Friday, 8 AM - 5 PM) based at our office in Louisville, KY. The physical environment requires frequent indoor work, but the work location may vary between office, warehouse, and other locations. Occasional outdoor work may also be required. Key Responsibilities: Level 1 (Entry-Level) • User Support: Provide first-level support to end-users, troubleshoot hardware/software issues, and assist with general inquiries., • System Monitoring: Monitor network and system performance and respond to alerts., • Documentation: Maintain accurate records of hardware, software, and network configurations., • Hardware Maintenance: Assist with basic hardware installations, repairs, and upgrades., • Software Updates: Assist in software installations, updates, and patches., • Training: Participate in training programs to enhance IT knowledge and skills. Level 2 (Intermediate-Level) (In addition to Level 1 responsibilities) • Network Administration: Manage and configure network devices such as switches, routers, and firewalls., • Server Maintenance: Administer and maintain server infrastructure, including hardware, virtualization, and operating systems., • Security: Assist in implementing security protocols, such as firewalls, antivirus, and intrusion detection., • Backup and Recovery: Manage data backup and recovery solutions., • Project Support: Collaborate on IT projects such as system upgrades, migrations, and infrastructure expansion. What We're Looking For: • Bachelor's degree in Information Technology, Computer Science, or a related field (preferred)., • Relevant certifications (CompTIA, Cisco, Microsoft, AWS, etc.), depending on the role., • Strong problem-solving skills and the ability to work both independently and as part of a team., • Excellent communication and interpersonal skills., • A passion for staying up to date with the latest IT trends and technologies. Why Join Technology Plus? At Technology Plus, we foster a welcoming and collaborative team environment. You'll be part of a company that values innovation and creativity, offering opportunities for growth and development. Join us in making a real impact on our clients and the community! Ready to Apply? If you're organized, detail-oriented, and excited about the opportunity to engage with clients, we want to hear from you! Apply today and become part of the Technology Plus family. Job Posted by ApplicantPro

Job DescriptionDescription: Come grow with us! It is an exciting time within our company as we expand the services offered to our customers. At ControlTouch Systems, our goal is to be “The BEST in Baggage”. We are seeking innovative-minded, qualified candidates to join our team as we continue to do just that! We design and support systems for airports that get baggage to passengers at destinations all over the world safely, accurately, and efficiently. Check out the job description below and apply today! JOB SUMMARY: The Controls Engineer II is responsible for the advanced support of all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working with minimal supervison. A successful Controls Engineer II has an advanced level of knowledge and understanding of commonly used controls engineering concepts, PLC programming and practices with an ability to lead/mentor entry level Controls Engineers as well as a willingness to attend training to further build their knowledge and abilities to advance to the next level. ESSENTIAL FUNCTIONS: • Understand AC/DC control systems with the ability to read component cut sheets., • Able to use computer software for design engineering and PLC programing., • Capable of trouble shooting a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Designing and developing layouts for electrical circuits or systems for power and control distribution., • Support the Systems Checklist for projects during field installation and startup., • Ability to develop electrical diagrams with varying levels of efficiency while being able to locate and correct mistakes found in electrical diagrams by themselves and others., • Ability to take the controls lead on project teams., • Capable of creating functional system test plans for use in field commissioning and ability to contribute written descriptions of system operations for technical documents., • Communicate with other team members effectively and keep Administrative Coordinator advised of schedule; checking and using voicemail and email diligently; and maintaining the team relationship., • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging and success driven culture, • Travel up to 50% PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time, • Repetitive typing/data entry, • Lifting up to 50 pounds WORK SCHEDULE: This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Advanced proficiency in several programming languages and control device networks for PLCs., • Ability to read and understand written specifications, as well as contract drawings and be capable of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, water and wastewater systems and manufacturing., • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs., • Experience Required:, • PLC programming, debugging and commissioning, • Plan/hardware design, • AutoCAD (AutoCAD E desired), • Microsoft Office Suite, • Basic knowledge of electrical equipment and local building codes such as UL508a, NEC and NFPA, • Experience Preferred:, • Hands-on mechanical and electrical capabilities, • Troubleshooting, • Material Handling, • Understanding VFDs, Servos, sensors and Vision Systems. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 3-5 years in the field or related area., • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed

Job DescriptionDescription: JOB SUMMARY: The Sr. Project Engineer is responsible for the complete electrical engineering scope of assigned projects. This person will lead all phases of an electrical engineering project to include concept, research, estimating support, component selection, network design, panel design, device layout, device troubleshooting, programming, in house testing, on-site installation, commissioning, and after-sales support. A successful Sr. Project Engineer has an expert level of knowledge and understanding of the full scope of electrical engineering practices, theories, and programming to implement the electrical engineering for a project from concept to completion. This person will create the project execution plan, assign tasks to resources, monitor and report progress, develop recovery plans, and manage deviations. The Electrical Sr Project Engineer serves as the subject matter expert (SME) for the project team and provides coaching and guidance. In collaboration with the Electrical Engineering Leadership team, the Electrical Sr. Project Engineer strives for continuous improvement in department processes and employing the latest technology and industry best practices in all facets of project execution. ESSENTIAL FUNCTIONS: • Develop, manage, monitor, and maintain project schedules., • Assign day to day tasks of project team members., • Read and understand scope from contract documents and drawings., • Effectively communicate project, department, and company requirements to project team or other stakeholders., • Manage assigned projects to successful completion prioritizing safety, quality, schedule, and cost., • Participate in, or complete personally, the design of the complete control systems including, power distribution, device layout, network design, panel layout, and device selection., • Participate in, or complete personally, the programming, both HMI and PLC, of the complete control systems., • Create Descriptions of Operations for complete systems., • Communicates technical information to non-technical stakeholders, executive leadership, customers, and potential customers., • Participate in, or complete personally, the commissioning of complete control systems., • Strive for continuous improvement by identifying improvements in current processes and collaborate with management to adopt these improvements., • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging, and success driven culture., • Travel up to 50% PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time., • Repetitive typing/data entry., • Lifting up to 50 pounds. WORK SCHEDULE: This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. Requirements: REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: • Expert level understanding of project management practices and tools., • Advanced proficiency in several programming languages and control device networks for PLCs with good aptitude for learning the programming for new/additional systems., • Ability to read and understand written specifications, as well as contract drawings and be capable of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, baggage handling systems and manufacturing., • Ability to check diagrams to correct errors and use that information as a training opportunity/transfer of knowledge to foster a continuous improvement environment to further develop the skills of less experienced controls engineers., • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver., • Self-starting instincts and strong analytical skills., • Excellent verbal and written communications skills., • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 8+ years in the electrical engineering field or related area,, • 6+ years in Material Handling Industry, preferably within Baggage Handling., • 2+ years as Electrical Project Engineer,, • Legally authorized to work in the United States., • Ability to obtain airport security clearance as needed. It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodation for qualified individuals with disabilities.

Job Description This is an office based position in Louisville, KY. The AI Solutions Engineer will own the complete lifecycle for the AI agents and automation development for Heaven Hill, from infrastructure setup and backend integrations to user-facing interactions. This position will collaborate closely with internal stakeholders, end-users, and technology teams to deliver solutions that quickly move from concept to production, enhancing employee effectiveness and accelerating Heaven Hill’s digital growth. This position will provide internal support to Heaven Hill as needed on our key data sources, pipelines, semantic models, and processes via collaboration and knowledge sharing. This also includes partnership with the IT product owners and the business the complete projects following the Ways of Working protocol. Position Responsibilities include, but not limited to: • Agent Development: Build and deploy AI agents using LangChain, Semantic Kernel, Anthropic, or similar frameworks to securely query enterprise data through ChatGPT Enterprise.AI, • Data Integration & Management: Create and maintain data connectors exposing SQL, SharePoint, and other enterprise systems via MCP or custom solutions, enforcing strict security standards and RBAC., • MLOps & DevSecOps: Develop and automate CI/CD pipelines for prompts, vector stores, and schema management; monitor AI solution performance (latency, token usage, accuracy)., • User Engagement & Support: Collaborate closely with business stakeholders for interactive development, capturing user feedback and ensuring high adoption rates through clear documentation. Work with product owners to lead internal projects (Tier 3 support), • Utilizing Fabric, and SSRS/SSIS, • Data Projects – Enterprise Data Warehouse, Power BI implementation, updating legacy data pipelines, • Research & Evaluation: Evaluate emerging AI technologies and tools and provide strategic recommendations on technology adoption., • Security & Governance: Align AI solutions with internal security policies, conduct threat modeling, and prepare for compliance audits., • Improving our Team, Tools and Processes: Help maintain systems by updating code as needed, documenting/fixing processes, mentoring and collaborating with other engineers, suggesting process and technology improvements or changes, • Partner with manager to plan, write, and implement policies and procedures that demonstrate best practices., • Provide guidance and support during weekly data engineering team meetings and project discussions, especially around following best practices and team policy. Role Qualifications: • Bachelor’s Degree in Computer Science, Information Systems, Data Analytics, or related field, • Minimum 4 years of experience developing backend services/data pipelines, preferably in Python, • Practical experience with LLM orchestration frameworks and vector databases, • Proven experience deploying production applications on Azure, • Deep understanding of OAuth, JWT, RBAC, and secure data access principles, • Proficient SQL skills, including query optimization Valued but not Required Experience: Experience with Microsoft Copilot Studio plugins or Fabric Lakehouse Familiarity with OpenAI Platform, ChatGPT, Gemini or Llama Certification in Azure AI Engineer (AI-102) or Azure Data Scientist (DP-100) Physical Requirements: While performing duties of job, employee is occasionally required to: • Stand; walk; use hands and fingers to handle, or feel objects, and use of computer; reach with hands and arms., • Lift and/or move up to 20 pounds. Benefits • Paid Vacation, • 11 Paid Holidays, • Health, Dental & Vision eligibility from day one, • FSA/HSA, • 401K match, • EAP, • Maternity/Paternity Leave Heaven Hill and its affiliates are committed to fostering a diverse workforce as an Equal Employment Opportunity company. We invite applications from candidates of all backgrounds, without regard to race, religion, color, sex, sexual orientation, natural origin, gender identity or expression, age, disability, veteran status, or any other legally protected characteristic.

Job Description JOB DESCRIPTION Project Engineer Department: Automation FLSA Designation: Exempt PURPOSE The Project Engineer provides technical support and administrative help to Project Managers and the business unit as a whole. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. At a high level, under direct supervision of a Project Manager, a Project Engineer will: • Provide sales and business development support as needed to build client relationships, obtain more work, including providing assistance with design, material selection, estimating, and creation of proposals, scope letters, contracts, etc., • Participate in ongoing review, planning and formulation as it relates to the specific business unit and contribute to the team on how to achieve required and desired results., • Assist with day-to-day coordination and administration of projects, to include but not limited to: understanding project scope, managing budgets and fiscal controls through value engineering, monitoring quality control provisions, coordinating work sequencing, issuing purchase orders, procurement, change orders, and contractor approvals, as appropriate., • Assist with procuring subcontractors and monitoring their work quality and schedule as required for installation., • Ensure customer satisfaction by continual communication on scheduling coordination, project progress, and obtaining feedback on Baker Group’s performance, sharing any positive or negative feedback with team., • Attend jobsite visits, internal project meetings, and coordinate meetings as directed, including tracking action items and providing appropriate follow-up., • Help ensure project performance, operations and delivery are in compliance with design and/or specifications., • Develop relationships with customers and pursue opportunities which provide long-term relationships and revenue opportunities., • Utilize company standard documents including but not limited to business development processes, pre-proposal checklists, turnovers, subcontracts, purchase orders, warranty, etc., • Confer with project managers, business unit leaders, etc. to discuss and resolve any questions, complications or problems., • Accurate daily time and equipment reporting. MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Project Engineer I:, • Entry level role, typically supervised by a Project Manager., • Offers information, helps with coordination and preparation, assists with analyzing and compiling data., • May help prepare estimates and inspect work to assure compliance with plans and specifications., • Begins to build solid knowledge about the company, their trade best practices, recognized work standards and expectations., • Builds solid understanding of job cost history, contract status and job overview reports., • Builds skill in managing customer relationships, working with Accounting to bill customer and enter budget, and ensure quality execution., • Position normally requires a 4-year Engineering or Construction Management degree and 0-1 year of experience, including internships., • Project Engineer II‐ meets all requirements of Project Engineer I above and:, • Serves as a project technical source, providing interpretation and resolving questions and problems., • Coordinates pieces of the project given proven skill and ability., • Now involved in more detailed processes directly related to project execution, including budgeting, resource allocation, schedule development and quality controls, or other similar functions that require more expertise and experience., • Takes on additional client relationship building activities that lead to increased business revenue for Baker Group., • Position normally requires a 4‐year Engineering or Construction Management degree and 1‐4 years of experience, including internships., • May begin to run small projects or develop a book of business on their own., • Usually develops into a Project Manager role. CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Strong technical skills, including but not limited to, experience with the following software: project management, accounting, scheduling, inventory, design, document management, e-mail, Microsoft Office Suite, time accounting and spreadsheets., • Excellent active listening, verbal and written communication skills., • Strong initiative and attention to detail, prioritization, and organization skills; ability to work independently and effectively in a team environment., • Confident decision-making ability., • Ability to read and comprehend drawings and sketches., • Ability to understand and adhere to contract terms and conditions., • Ability to maintain technical expertise on new technologies, products, and tools through continuing education initiatives., • Basic knowledge of construction and renovation, including materials, methods, tools, etc. involved in strategic planning resource allocation and modeling, production methods and coordination of people and resources in a safe manner., • Knowledge of practical application of engineering science and technology, including applying principles, techniques, procedures and equipment to the design and production of various goods and services., • Knowledge of principles and processes for providing customer and personal services. ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • Computer, • Calculator, • Tape measure, • PPE (hard hat, safety glasses, safety boots, Hi-Vis vest), • Clothing: jeans, appropriate office shirt Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description Senior Geotechnical Engineer Requisition Number: 2026-1360-01 S&ME is looking for an experienced and driven Senior Geotechnical Engineer for our Geotechnical team in New Albany, Indiana. This is an opportunity to take ownership of impactful work, apply your expertise to complex engineering challenges, and continue developing your career within a collaborative and growth-focused environment. As a Senior Geotechnical Engineer, you will serve as a technical and project leader, guiding geotechnical projects from early planning through final delivery while upholding high standards for safety, quality, and performance. You will apply advanced knowledge of subsurface investigations, analysis, and design to develop sound, practical solutions for challenging site conditions. In this role, you'll work closely with clients and project partners, contribute to business development initiatives, and help strengthen long-term client relationships. You'll also play a key role in mentoring junior engineers, coordinating multidisciplinary teams, and refining processes to improve efficiency and consistency, supporting both individual development and the continued growth of the team. Your Day-to-Day: • Geotechnical Analysis & Design: Perform and oversee advanced evaluations related to foundations, settlement, slope stability, and earth support systems, and recommend appropriate ground improvement or mitigation methods., • Project & Client Collaboration: Partner with clients, contractors, and internal teams to support successful project execution while providing guidance, feedback, and mentorship to junior staff., • Reporting & Proposal Development: Produce clear, well-organized technical reports, contribute to project proposals, and support marketing and relationship-building activities., • Leadership & Quality Focus: Promote best practices by maintaining compliance with company standards, emphasizing safety, risk management, schedule adherence, and quality control throughout all phases of work. What You Bring: • A Bachelor's degree in Civil or Geotechnical Engineering, Mining, or a related engineering field, • A Minimum of 10 years of project management experience in the A/E/C industry, • Professional Engineer (PE) license or the ability to obtain, • A strong proficiency in computer skills, including at a minimum Microsoft Excel, Word, PowerPoint, and AutoCAD We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. Here's what you can look forward to: • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program - $50 off per month on your 2027 premiums!, • Pet Insurance, • Term Life & Long-Term Care Coverage - available Spring 2026, • 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! If you are seeking a challenging and rewarding career with a firm committed to our employees and providing quality service to our clients, join our team! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job Description JOB DESCRIPTION Project Engineer Department: Automation FLSA Designation: Exempt PURPOSE The Project Engineer provides technical support and administrative help to Project Managers and the business unit as a whole. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. At a high level, under direct supervision of a Project Manager, a Project Engineer will: • Provide sales and business development support as needed to build client relationships, obtain more work, including providing assistance with design, material selection, estimating, and creation of proposals, scope letters, contracts, etc., • Participate in ongoing review, planning and formulation as it relates to the specific business unit and contribute to the team on how to achieve required and desired results., • Assist with day-to-day coordination and administration of projects, to include but not limited to: understanding project scope, managing budgets and fiscal controls through value engineering, monitoring quality control provisions, coordinating work sequencing, issuing purchase orders, procurement, change orders, and contractor approvals, as appropriate., • Assist with procuring subcontractors and monitoring their work quality and schedule as required for installation., • Ensure customer satisfaction by continual communication on scheduling coordination, project progress, and obtaining feedback on Baker Group’s performance, sharing any positive or negative feedback with team., • Attend jobsite visits, internal project meetings, and coordinate meetings as directed, including tracking action items and providing appropriate follow-up., • Help ensure project performance, operations and delivery are in compliance with design and/or specifications., • Develop relationships with customers and pursue opportunities which provide long-term relationships and revenue opportunities., • Utilize company standard documents including but not limited to business development processes, pre-proposal checklists, turnovers, subcontracts, purchase orders, warranty, etc., • Confer with project managers, business unit leaders, etc. to discuss and resolve any questions, complications or problems., • Accurate daily time and equipment reporting. MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Project Engineer I:, • Entry level role, typically supervised by a Project Manager., • Offers information, helps with coordination and preparation, assists with analyzing and compiling data., • May help prepare estimates and inspect work to assure compliance with plans and specifications., • Begins to build solid knowledge about the company, their trade best practices, recognized work standards and expectations., • Builds solid understanding of job cost history, contract status and job overview reports., • Builds skill in managing customer relationships, working with Accounting to bill customer and enter budget, and ensure quality execution., • Position normally requires a 4-year Engineering or Construction Management degree and 0-1 year of experience, including internships., • Project Engineer II‐ meets all requirements of Project Engineer I above and:, • Serves as a project technical source, providing interpretation and resolving questions and problems., • Coordinates pieces of the project given proven skill and ability., • Now involved in more detailed processes directly related to project execution, including budgeting, resource allocation, schedule development and quality controls, or other similar functions that require more expertise and experience., • Takes on additional client relationship building activities that lead to increased business revenue for Baker Group., • Position normally requires a 4‐year Engineering or Construction Management degree and 1‐4 years of experience, including internships., • May begin to run small projects or develop a book of business on their own., • Usually develops into a Project Manager role. CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Strong technical skills, including but not limited to, experience with the following software: project management, accounting, scheduling, inventory, design, document management, e-mail, Microsoft Office Suite, time accounting and spreadsheets., • Excellent active listening, verbal and written communication skills., • Strong initiative and attention to detail, prioritization, and organization skills; ability to work independently and effectively in a team environment., • Confident decision-making ability., • Ability to read and comprehend drawings and sketches., • Ability to understand and adhere to contract terms and conditions., • Ability to maintain technical expertise on new technologies, products, and tools through continuing education initiatives., • Basic knowledge of construction and renovation, including materials, methods, tools, etc. involved in strategic planning resource allocation and modeling, production methods and coordination of people and resources in a safe manner., • Knowledge of practical application of engineering science and technology, including applying principles, techniques, procedures and equipment to the design and production of various goods and services., • Knowledge of principles and processes for providing customer and personal services. ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • Computer, • Calculator, • Tape measure, • PPE (hard hat, safety glasses, safety boots, Hi-Vis vest), • Clothing: jeans, appropriate office shirt Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job DescriptionDescription: JOB TITLE: Controls Engineer Co-Op REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Non-Exempt JOB SUMMARY: The Controls Engineer Co-Op is responsible for assisting in the support of all phases of a controls project to include assistance in concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working under an experienced engineer and an established set of guidelines. ESSENTIAL FUNCTIONS: • Able to use computer software for design engineering and PLC and HMI programming., • Capable of basic trouble shooting of a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Support in designing and developing layouts for electrical circuits or systems for power and control distribution., • Assist in the production of detailed schematics., • Support the Systems Checklist for projects during field installation and startup., • Assist with Systems documentation and manual creation, • Assist in the development of electrical diagrams., • Be a valuable contributor to project teams., • Communicate with other team members effectively, • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging and success driven culture, • Travel up to 50% PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time, • Repetitive typing/data entry, • Lifting up to 50 pounds WORK SCHEDULE: This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Has knowledge of commonly used concepts, practices, and procedures with controls, • Basic programming and design knowledge, • Basic CAD knowledge, • Basic knowledge of MS Office Suite, • Demonstrate effective organizational skills and multi-tasking abilities, have an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Must be actively pursuing a Bachelor's or Master’s degree in engineering – preferably EE, EET or CECS from and accredited university/college., • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed

Job Description About Us Join a talented team of engineering professionals at Vogt Power International Inc. Vogt is based in Louisville, KY and specializes in the design, manufacture and supply of equipment and solutions to the power generation industry. We are an industry leader in heat recovery steam generators (HRSGs) with both domestic and international customers. Position Summary The Project Engineer is responsible for project engineering coordination for the department including, but not limited to activities related to project development, execution, review and approval of requisitions and review bought out equipment technical evaluations. This position has responsibility and accountability for ensuring engineering schedules, providing engineering man-hour forecasts and engineering budgets on assigned projects. This position is the technical manager of the project and communicates technical issues with the Project Manager and the Customer. This position will involve customer visits and other business-related activities such as support for project kick off meetings and site walk downs as necessary for projects. Essential Functions/Responsibilities Project Technical Leader • Manages the technical aspect of the assigned projects during contract execution, • Provides on-site support to vendors, and manufacturing when necessary to ensure project success, • Understand and interpret specification requirements to ensure that they are met during project execution. Customer Liaison • Lead technical contact for the customer on assigned projects. All technical correspondence with the customer will flow through and be reviewed by the PE, • Formulate and present all RFI’s to the customer for quick resolution to allow the project team to meet schedule requirements, • Advise customer on impacts of change requests Scheduling, Forecasting and Budget Analysis • Maintains a project’s engineering schedule for all assigned projects by coordinating tasks with Discipline Managers and project team personnel, • Responsible for developing and maintaining project man-hour forecasts, • Report out to upper management on schedule progress and provide recovery plans for areas where the schedule is behind. Document Control • Manage the Document Control Automation Program (DCAP) for the project., • Process all incoming vendor and customer documents to ensure that they are reviewed by the proper team members., • Process all outgoing document submittals to the vendors or customers to ensure that necessary changes are communicated properly and in a timely manor, • Set up and manage the Master Document List (MDL) of customer submittals to ensure that all documents are submitted on time as required by the project specification/contract Administrative • Development and coordination of project O&M manual as required., • Conducts, participates in and maintains meeting minutes for team meetings, meetings with support personnel, and meetings with the customer., • Takes an active role when working with other PEs to make improvements in cost, quality or efficiency of the department by revising procedures, work instructions or templates Sales/Innovation • Represents the Engineering Department internally and externally as directed, including traveling when needed., • Facilitates required design improvements/innovation projects based on customer inputs, • Review sales proposals, RFQ’s, proposal schedules and technical reports. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Requirements • B.S. in mechanical, chemical, or metallurgical Engineering or closely related field., • Demonstrated excellent written, verbal, and interpersonal communication skills., • Minimum five (5) years of related industry experience or minimum five (5) years of experience in each of the following: -contract-based project execution -project management directly leading a technical team -meeting KPIs pertaining to schedules and budgets -experience working with external customers and change management, change orders -experience negotiating with suppliers including contract management, legal terms and conditions and change management • Must be available to lead or participate in meetings that occur internationally outside of typical office hours, • Demonstrated knowledge of company standards and applications., • Knowledge of various codes (ASME, NBIC, B31.1, etc.) desirable, including product application., • Demonstrates a working knowledge of HRSG or boiler operations, design philosophy, principles, and details of application., • Must have valid passport and be able to travel when required., • Must be resourceful, organized, and able to work under pressure in order to meet deadlines, manage multiple project simultaneously and respond quickly to requests. To provide greater transparency to candidates, we include base pay ranges for all US-based job postings that encompass all potential locations and levels for the open position. Our base pay ranges are set based on the function, discipline, level and regional location and are benchmarked against companies in the same or similar industry. Final offers may vary based on multiple factors, including education, depth and relevance of work experience, relevant licenses and certifications, and may vary from the amounts listed in the job posting. The base pay range for this Project Engineer role is $108,000 - $140,000 annually.

Job Description Zeochem is seeking a Maintenance Manager to lead our maintenance team and support safe, reliable, and efficient manufacturing operations. This role is responsible for overseeing maintenance personnel, maintenance planning and execution, preventive and predictive maintenance activities, contractor coordination, budgeting, and continuous improvement initiatives that support operational performance and equipment reliability. Working closely with Operations, Engineering, and other departments, the Maintenance Manager plays a key role in minimizing downtime, improving equipment performance, and ensuring the safe and effective operation of plant equipment, utilities, and facilities. As a 24/7 operation, this role supports both 8-hour and 12-hour shift employees and requires flexibility to provide leadership coverage during nights and weekends as needed. What You'll Do • Lead and develop a team of skilled maintenance professionals, • Coordinate maintenance priorities to support production and operational objectives, • Further expand preventive and predictive maintenance programs to maximize equipment uptime and performance, • Drive safe work practices and ensure compliance with company policies and regulatory requirements, • Manage maintenance planning, scheduling, and resource allocation, • Coordinate contractors and external service providers to support maintenance and plant improvement activities, • Partner with Operations, Engineering, and the Project & Reliability Engineer to support equipment upgrades, capital projects, and continuous improvement initiatives, • Monitor maintenance performance, identify improvement opportunities, and implement solutions that enhance efficiency and reliability, • Assist in developing and managing departmental budgets and maintenance-related expenditures, • Support long-term asset management and equipment replacement planningWhat We're Looking For, • Strong leadership skills with the ability to coach, develop, and hold teams accountable, • Experience leading maintenance operations in a manufacturing or industrial environment, • Knowledge of mechanical, electrical, pneumatic, hydraulic, and utility systems, • Experience with preventive maintenance programs and CMMS systems, • Strong troubleshooting, problem-solving, and decision-making abilities, • Ability to prioritize work, manage resources, and coordinate multiple activities simultaneously, • Effective communication skills and the ability to collaborate across departmentsPreferred Qualifications, • Associate's or Bachelor's degree in a technical, engineering, maintenance, or related field preferred, • 7-10 years of industrial maintenance experience required, • 5+ years prior leadership or supervisory experience in a manufacturing environment required, • Experience with contractor management, capital projects, and continuous improvement initiatives, • Experience with CMMS systems, preventive maintenance programs, and industrial utility systems strongly preferred, • Working knowledge of industrial safety programs, lockout/tagout procedures, and regulatory compliance requirementsWhy Join Zeochem? At Zeochem, you'll have the opportunity to lead a critical function within a 24/7 manufacturing operation while helping drive safety, reliability, and operational excellence. You'll work alongside a collaborative leadership team and play a direct role in improving equipment performance, developing employees, and supporting the production of industry-leading molecular sieve products. Compensation will be determined based on relevant industrial maintenance experience, technical qualifications, and leadership experience.

Job Description We are seeking a Controls Engineer with AMR experience in the Louisville area to become an integral part of our team. You will perform controls engineering duties in the Industrial Automation Field Including but not limited to: Hardware and Software design as well as start up and debug activities on internal automation systems and AMRs. Responsibilities: • Start-up, commissioning, and debug of new AMR fleets and integrated automation systems, • Problem-solving and optimizing existing AMR operations (including mapping, routing, and navigation tuning), • Production support, troubleshooting, and maintenance for mobile robot operations, • Integration of AMRs with Factory Information Systems (e.g., Fleet Management Software, WMS, or MES), • Support an ASRS projects Qualifications: • Previous experience in the controls field, with direct experience deploying and supporting AMRs or AGVs, • Ford GVOSS knowledge and strong tooling experience., • Familiarity with AMR navigation technologies (e.g., LiDAR, SLAM) and mobile robot safety standards (e.g., ANSI/RIA R15.08), • Excellent personal and communication skills, • Self-starting work ethic, • Ability to work well in cross-functional teams, • Strong problem-solving and critical thinking skillsCompany DescriptionR&E Automated Systems (www.reautomated.com) is the industry leader in Automotive Controls, Robotics, Joining, and Plant Maintenance. In addition, Engineering Services, including Mechanical, Quality, Simulation, and Service Part Stamping, Assembly, and Coating.R&E Automated Systems (www.reautomated.com) is the industry leader in Automotive Controls, Robotics, Joining, and Plant Maintenance. In addition, Engineering Services, including Mechanical, Quality, Simulation, and Service Part Stamping, Assembly, and Coating.

Job DescriptionDescription: JOB TITLE: Mechanical Principal Engineer REPORTS TO: Director, Mechanical Engineering JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Mechanical Principal Engineer will play a critical role in the specification knowledge, training, onboarding, decision making, workflow development, and general upkeep of the mechanical engineering department. You will collaborate successfully with stakeholders including project managers, project engineers, engineering designers and design engineers, other engineering disciplines, procurement, and field service, as well as heavily with the customer, to ensure that our department decisions align with customer requirements, field services needs, industry standards, and company best practices. Our Mechanical Principal Engineer would be responsible for being a main point of contact for the company for a customer in mechanical engineering. You would understand baggage handling systems fully, comprehend customer specifications and be able to influence future specification changes, and create standards for both ways of working and internal specifications. You will advise project engineers, designers, and other engineering disciplines on a consistent, quality-driven, and efficient way to work. ESSENTIAL FUNCTIONS: • Design and review internal process documentation, templates, work instructions, SOPs, and other ways of working., • Dictate internal standards, focusing on standardization., • Develop internal tools and calculation sheets for use by the organization., • Lead and guide project engineers and designers on an advisory basis, focusing on consistency, adherence to customer specifications and requirements, and high-quality output., • Understand baggage handling systems fully and make system level design decisions based on your knowledge., • Perform and develop complex engineering calculations, such as horsepower calculations and speeds, and understand the mechanics behind the calculations., • Collaborate with internal stakeholders, such as project management, procurement, field services, and other engineering disciplines to ensure mechanical engineering is aligned fully with the organization., • Represent the company appropriately during collaborative participation with customers and consultants., • Work together with vendors to ensure adherence of design and quality, as well as active participation in product design to meet customer needs., • Identify potential issues, provide efficient solutions, and make decisions when required., • Create and maintain equipment Manifests and other engineering documentation., • Review detailed field installation drawings containing detail for customer approval and field installation ease, and assist with dictating internal standards for drawings., • Assist in ensuring all designs comply with specifications and standards. WORK ENVIRONMENT: • Office primarily, with occasional field visits., • Up to 10% travel may be required. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • High productivity in office., • Sitting for prolonged periods of time., • Repetitive typing/data entry., • Lifting up to 20 pounds. WORK SCHEDULE: This position works in office. General office hours are M-F, 7a-4p or 8a-5p. Working hours may vary to meet project requirements. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Excellent leadership and delegation skills., • Ability to read and understand customer specifications, engineering drawings, Bills of Material, and equipment Manifests., • Ability to understand complex engineering calculations., • Detail oriented, organized, and quality driven., • Ability to multi-task and change focus rapidly., • Critical thinker and problem-solver., • Self-starting instincts and motivation to work independently., • Excellent verbal and written communication skills. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 7+ years’ experience in conveyance., • Knowledge of conveyor systems, specifically baggage handling, is required., • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook, Project), • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed.

Job Description About Us Join a talented team of engineering professionals at Vogt Power International Inc. Vogt is based in Louisville, KY and specializes in the design, manufacture and supply of equipment and solutions to the power generation industry. We are an industry leader in heat recovery steam generators (HRSGs) with both domestic and international customers. Position Summary The Thermal Engineer is an integral part of an HRSG project team. The Thermal Engineer's role is responsible for all process design calculations, pressure part design, and heat transfer calculations. The Thermal Engineer is also responsible for field performance testing of equipment to validate guaranteed thermal performance and to analyze existing equipment for performance and design improvements. This position requires interfacing and collaboration with multiple disciplines to achieve quality results. Essential Functions/Responsibilities • Preparation of Thermal Design Book., • Review of technical proposal and customer specifications, • Thermal and hydraulic design analysis for optimization., • Basic risk analysis/Liquidated Damages analysis., • Startup curves., • Performance correction curves., • Performance Test procedure., • Test data analysis and performance evaluation To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Requirements • B.S. in Mechanical or Chemical Engineering., • Demonstrates excellent written, verbal and interpersonal communication skills., • Must have a broad understanding of heat transfer, mass transfer, thermodynamics, fluid mechanics and the structural and mechanical principles of the product and be able to apply these disciplines to the product design., • Must be organized and able to work under pressure in order to meet deadlines, manage multiple projects simultaneously and respond quickly to requests., • Computer experience and knowledge of EXCEL, WORD, and other relevant packaged software., • Must have a valid passport and be able to travel when required. To provide greater transparency to candidates, we include base pay ranges for all US-based job postings that encompass all potential locations and levels for the open position. Our base pay ranges are set based on the function, discipline, level and regional location and are benchmarked against companies in the same or similar industry. Final offers may vary based on multiple factors, including education, depth and relevance of work experience, relevant licenses and certifications, and may vary from the amounts listed in the job posting. The base pay range for this Thermal Engineer role is $75,000 - $95,000 annually.