Trabajos hardware en Riverside, CaliforniaCrear alertas

Who Are We? Toro’s Irrigation and Lighting business is located in Riverside, CA. The Toro Company’s irrigation business is comprised of two distinct brands, Toro® and Irritrol®. Both brands offer a full line of solid, dependable, irrigation products including controllers, sensors, valves, spray heads and rotors to help customers care for golf courses, sports fields, public green spaces, commercial and residential properties. Unique Lighting Systems is a leading brand of professional grade lighting fixtures, low voltage transformers, LED lamps and the patented HUB system for installation. Serving both residential and commercial markets, Unique Lighting Systems offers a full line of outdoor lighting products The Embedded Engineer provides expertise within the department of Technical Operations for the Precision Irrigation Division of the Toro Company. Primary duties include supporting existing products currently in the market and new product development. Individual will work closely with the development team, production, customer support, supply chain to support and sustain production of products. Scope will include, but not be limited to, hardware and firmware features and functionality. What Will You Do? In order to grow and build a successful career with The Toro Company, you will be responsible for: * Maintain design concepts for circuits and systems, involving analog and digital design techniques and interface sensors with microcontrollers/microprocessors. * Proficiency in C/C++ and familiarity with RTOS environments * Strong understanding of hardware interfaces (SPI, I2C, UART, CAN, etc.) * Printed circuit board design, ORCAD preferred tool * MCU Experience: MIMXRT1176AVM8B, STM32U0, MK64FN1M0VLL12, LPC2478FBD208, STM32F777BIT6 * Sensor applications: Inductive, current, resistive, magnetometers, acoustic sensors, ultrasonic transducers and accelerometers * Solenoid based actuators * Data science and/or Generative AI * AC/DC power conversion * Knowledge of encryptions and security methods * Wireless: Cellular 4G_LTE, M2M IoT and 5G applications. ISM bands 900MHZ, UHF 400MHZ and BLE applications. WiFi HaLow * Serves as an expert within the department for a design related field and provides consulting to others on technical matters. * Evaluates feasibility and applicability of newer technologies and methods to existing products and designs. * Collect and analyze technical information from a variety of sources, including: * conversations with engineers, product managers, suppliers, etc. * technical documents. * operation of equipment. * their own tests & experiments What Do You Need? To be considered for this role, an individual should meet the following minimal requirements: * Bachelor’s degree in electrical or computer engineering or closely related engineering field. Computer Science degree will NOT be considered. * Engineer II: 2 – 4 years of experience * Engineer III: 5-7 years of experience * Engineer IV: 7+ years of experience * Willing to learn Python, C, and other programming languages as needed * Works well in a team environment * Good problem-analysis and resolution skills What Can We Give You? At The Toro Company, we are always working to make sure our employees know just how valued they are. In addition to a competitive salary, an affordable and top tier medical/dental/vision plan, 401k, and many other great benefits - The Toro company offers employees at our Riverside location a variety of perks, including: Dress for your day - We know you're more productive when you're comfortable, which is why TTC employees are encouraged to take advantage of our casual, corporate environment. Wellness - TTC offers a variety of mental health and financial health resources to all employees. Volunteerism - The Toro Company is proud to provide employees 20 hours of paid time to volunteer in the community. Competitive Salary – The pay range takes into account skills, experience, education, and location. It is not common to be hired at or near the top of the range; compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the annual pay range is between $82900- $120000. Cash compensation is one piece of our competitive total rewards package. You may be eligible to participate in an incentive program, which rewards employees based on individual and organizational performance. Eligibility and award amounts are determined by company policy and performance metrics. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees #LI-Onsite

Job Description Summary The Technical Sales Representative is responsible for managing an assigned portfolio of customers with a strong focus on customer service excellence and proactive communication. This role combines technical sales expertise with customer support responsibilities to drive revenue, ensure customer satisfaction, and maintain long-term business relationships. The ideal candidate has prior experience in technical sales, inside sales, or customer service within a manufacturing or industrial environment and is comfortable making outbound calls to customers to obtain information, follow up on opportunities, and resolve issues. Essential Duties and Responsibilities include the following. Other duties may be assigned. Customer Account Management • Serve as the primary point of contact for assigned customers, ensuring timely and accurate responses to inquiries, quotes, and orders., • Maintain strong relationships by understanding customer needs, providing technical support, and ensuring satisfaction throughout the sales cycle., • Identify and pursue new sales opportunities through customer outreach, bid-board monitoring, and collaboration with the field sales team., • Prepare cost proposals, technical quotes, and sales orders using ERP and CRM systems., • Interpret technical drawings, diagrams, and specifications to recommend products or solutions., • Provide remote troubleshooting assistance, identify replacement parts, and advise on service options., • Handle customer inquiries, complaints, and feedback professionally via phone, email, and other communication channels., • Ensure prompt follow-up and resolution for all customer requests., • Act as a liaison between customers and internal departments (engineering, operations, finance) to ensure successful outcomes., • Support marketing and product development by relaying customer feedback and market insights., • Participate in trade shows, customer visits, and on-site meetings when required. Supervisory Responsibilities This job has no supervisory responsibilities. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Decision Quality Customer Focus Managing Vision/Purpose Values and Ethics Action-Oriented Delivers Results Teamwork Technical Skills Product Knowledge Qualifications Education: • Bachelor’s degree in business, sales, marketing, or related technical discipline preferred; equivalent work experience accepted., • Experience: Minimum 3+ years in technical sales, inside sales, or customer service within a manufacturing, industrial, or engineering environment., • Proven track record of successful outbound customer communication and relationship building., • Familiarity with government contracting and bid processes is a plus. Other Skills and Abilities • Strong sales, negotiation, and relationship management skills., • Technical aptitude with ability to read and interpret engineering drawings and specifications., • Proficiency with ERP and CRM systems (EPICOR preferred) and Microsoft Office Suite (Excel, Word, PowerPoint)., • Excellent verbal and written communication skills with a high comfort level in initiating customer calls., • Strong organizational skills, attention to detail, and ability to manage multiple priorities., • Problem-solving mindset with the ability to work under deadlines. Language Skills Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Mathematical Skills Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, and percentages. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, numbers, or schedule form. Computer Skills To perform this job successfully, an individual should have a working knowledge of word processing, spreadsheet software (Word, Excel) CRM and ERP systems. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to walk and reach with hands and arms. The employee is occasionally required to stand. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually quiet but can be noisy if in the production or manufacturing area which requires appropriate Personal Protective Equipment (PPE). Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. PCI is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. PCI is also a Federal contractor. Employment may be contingent upon U.S. citizenship or valid "green card" holder status. This position requires use of information or access to hardware which is subject to the Internal Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee Company DescriptionPacific Consolidated Industries, LLC. is headquartered in Riverside, CA. The Company was founded in 1986 to supply cryogenic air separation systems to the U.S. military and has since expanded its technology offerings to include membrane and adsorption-based air separation. The Company has grown to become a leading manufacturer of rugged, mobile liquid and gaseous oxygen and nitrogen generation systems for the Military, Oil & Gas, and Commercial Oxygen markets. The Company has established itself as a global leader in air separation technology with thousands of systems installed in over 40 countries.Pacific Consolidated Industries, LLC. is headquartered in Riverside, CA. The Company was founded in 1986 to supply cryogenic air separation systems to the U.S. military and has since expanded its technology offerings to include membrane and adsorption-based air separation. The Company has grown to become a leading manufacturer of rugged, mobile liquid and gaseous oxygen and nitrogen generation systems for the Military, Oil & Gas, and Commercial Oxygen markets. The Company has established itself as a global leader in air separation technology with thousands of systems installed in over 40 countries.

Job Description SITECH Pacific in Riverside is currently hiring a field mechanic. Pay $35-$39.50 depending on experience. JOB SUMMARY: Field Mechanic Install, support, and maintain technology equipment for the earth moving industry. Ensure support agreements are maintained and executed in a professional manner through regular scheduled maintenance and repair. Develop an open line of communications with key operational and management personnel that ensures a successful relationship with our customers... Help promote SITECH / Trimble as a leader in the field and ensuring maximum market share by promoting the team concept through professionalism and technical expertise. ESSENTIAL FUNCTIONS: • Must possess the ability to diagnose, install and troubleshoot Trimble and other Machine Control Guidance systems and Telematic systems., • Performs basic trouble shooting skills for digital and analog electronic components, electrical wiring and related mechanical systems., • Responsible for installing, diagnosing and providing support for telematics and machine control products and diagnosing and repairing SITECH equipment in the field., • Lead installations of technology systems and products., • Works safely at all times and makes safety the highest priority and complies with all company and customer policies, procedures and standards., • Perform preventative maintenance on technology equipment and ensures it is maintained per customer contract., • Develop a relationship that leads our customers to ask us for assistance in solving their technology needs through our expertise and willingness to exceed their expectations., • Maintains open communications with manager and team members., • Available to travel and work occasional weekends., • Work within and promotes corporate values., • Must be willing to travel and work additional hours as needed to meet business and customer demands. KNOWLEDGE SKILLS, ABILITIES AND DEMANDS: • Must have basic computer knowledge, including the understanding of e-mail, Microsoft Office, hardware specification analysis, Internet based programs, • Must have basic hand and electrical tools or willing to purchase as needed., • Needs a basic understanding of electrical circuit theory and be able to read electrical schematics., • Must be able to use a multi-meter and test for voltage, current, and continuity., • Must have basic mechanical skills and knowledge., • Must be able to work as a team player., • Have the ability to work with limited supervision on a daily basis., • Dependable and consistent attendance., • Must have a good driving record and be insurable under company policy., • The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, sit or crawl, • The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds EDUCATION AND EXPERIENCE: • Experience with Hydraulics and Heavy Construction Machinery Preferred, • Proof of high school diploma or General Education Degree (GED)., • Able to achieve MSHA certification., • Must complete site specific training and pit driving, as it pertains to contracted site., • Must be able to communicate (speak, read, comprehend, write) in English., • Must have basic computer experience WORK ENVIRONMENT: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly exposed to risk of electrical shock., • The employee is frequently exposed to moving mechanical parts; high, precarious places; and outside weather conditions., • The employee is occasionally exposed to wet and/or humid conditions, extreme cold, and extreme heat., • The noise level in the work environment is usually loud., • Machinery and tool operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors. Apply Today and do not miss out on this great opportunity! Company DescriptionEnjoy an exciting career working with the highest quality, most comprehensive range of construction technology products in the marketplace. Our experienced construction professionals at SITECH Pacific provide local service, personalized training and technical support for Trimble’s complete portfolio of heavy and highway products. If you are interested in working with the most reliable and rugged construction technology available today, we have opportunities in sales, service & repair, installation, and construction software technology.Enjoy an exciting career working with the highest quality, most comprehensive range of construction technology products in the marketplace. Our experienced construction professionals at SITECH Pacific provide local service, personalized training and technical support for Trimble’s complete portfolio of heavy and highway products.\r\n\r\nIf you are interested in working with the most reliable and rugged construction technology available today, we have opportunities in sales, service & repair, installation, and construction software technology.

Job DescriptionMSM Industries, LLC has been a trusted partner to the U.S. Navy and its prime contractors for over 20 years. As an ISO 9001:2015 certified manufacturing business, we specialize in advanced material solutions for signature reduction, vibration and acoustic management, and environmental control. MSM also serves as a high-performance system integration and assembly provider for key customers. With in-house manufacturing and a track record for on-time, high-quality deliveries, MSM is known for innovation, reliability, and rapid response to complex program needs.MSM is part of Canopy Aerospace & Defense, a platform built to accelerate the future of advanced materials for space, defense, and maritime systems. Canopy A&D delivers specialized materials and components that carry customers from concept through sustainment. Canopy A&D’s advanced signal attenuation technologies and production-scale manufacturing accelerate the fielding of platforms that are faster, cooler, and quieter. Our adaptive approach ensures solutions evolve at the pace of shifting challenges, keeping our customers ahead of the curve.Role OverviewThe Business Development and Contracts Manager will support MSM’s customer engagement and production planning by managing the end-to-end quoting and proposal process as well as contract administration. This role works cross-functionally with engineering, production, finance, and quality teams to streamline RFQ tracking, optimize quote accuracy and strengthen customer communication to drive order capture. This role will work closely with Executive Management Team to improve, manage and maintain full process from RFQ receipt to Contract Review – along with owning key customer relationships to intimately understand customer needs in order to propose novel solutions. This role is an individual contributor role, with opportunities to build your team in early 2026. In addition to the opportunity to grow MSM’s excellence in business development and revenue management, you’ll get to work hand-in-hand with peers across the Canopy A&D platform on a daily basis to gain exposure to a wide array of defense, space, and maritime technologies. Key Responsibilities- Track and manage incoming customer RFQs to ensure timely, accurate quote submissions.- Improve, manage and maintain the quote to order capture process.- Collaborate with marketing, product, engineering, and operations teams to solve our customers’ hardest problems.- Develop strong relationships with customers, stakeholders, and business partners.- Coordinate internally across operations, finance, and leadership to develop informed quotes based on cost, capacity, and past job performance.- Track and report on business development and revenue execution metrics including backlog, pipeline, and performance.- Estimate project costs to develop quotes and lead in the proposal process by interfacing with outside processors and material suppliers.· Deeply understand our core and emerging capabilities, including capabilities across the broader Canopy A&D platform.- Serve as a point of contact for customers, communicating updates and improving order conversion rates.- Document revenue activity in CRM and ERP systems, ensuring proper part number setup and consistent catalog maintenance.- Manage customer PO revisions, including drawing updates, ship-to addresses, and quantity changes, ensuring all internal systems reflect changes accurately.- Support continuous improvement of ERP quote workflows and quoting efficiency as measured by KPIs.- Support customer engagements through advanced research, preparation of briefing documents, virtual and in-person meetings, and follow-up activity management. Required Qualifications- 5-10+ years of experience in business development, sales, account management, contracts management, estimating, or quoting roles in a manufacturing or supply chain environment.· Sincere excitement for the technologies Canopy develops and problems we solve for our customers.· Experience working with government or prime contractor customers in aerospace/defense.· Strong organizational and follow-through skills with the ability to manage multiple concurrent RFQs and order revisions.· Strong written communication skills to support short and long-form proposals.· Ability to read basic engineering drawings and Bill of Materials (BOM).· Excellent written and verbal communication skills – you will be the face of MSM to customers and responsible for expert-level interactions.· Working knowledge of business development and customer management processes and tools (i.e. CRM and ERP software, customer validation frameworks).· Extreme attention to detail: email, phone, in-person, and MS office suite. Preferred Qualifications- A technical degree or equivalent experience in an advanced technology work environment· Previous wins engaging US government customers through multi-stage proposal processes· Previous success across the entire customer lifecycle in a B2B sales or business development function for hardware products- Basic graphics design or video editing skills- Strong understanding of maritime signal attenuation materials, including radar absorbent materials, vibration and acoustic damping materials, and sonar system materials- Knowledge of ISO 9001 or AS9100 quality standards- Exposure to government quoting, catalog pricing, or FAR/DFARS-related processes· Active U.S. Security ClearanceType: Full Time, Exempt (Salaried)Base Salary Range: $100,000 to $140,000Base Location: Riverside, CATravel: As needed to various company facilities Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The base salary is just one part of your total compensation package at MSM. You will also have access to a comprehensive set of benefits like:Company paid employee medical, dental and vision insuranceRetirement plan participation (eligibility required) Paid Sick LeavePaid VacationPaid holidaysDiscretionary bonuses Physical Requirements / Work Environments· Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, dust, and temperature variations· Must be able to lift and carry up to 35 lbs and perform tasks involving standing, walking, bending, and manual assembly· Visual acuity required for reading technical drawings and digital media· Valid US driver’s license and ability to operate motor vehicles The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. Export Control RequirementsTo conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. MSM Industries is an Equal Opportunity Employer, employment with MSM Industries is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Summary The individual in this position will support manufacturing processes, continuous improvements, methods and associated work instructions. Collect and analyze data driven information for process control and capability improvement. Display strong ability to work in cross-functional teams including members from operations, engineering, customer service, and safety. Reduce non-conformity operational issues and conduct training of manufacturing personnel. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Responsible for providing test engineering support., • Analyze, understand, lead, and implement: Lean methodologies, engineering practices, existing product changes and new product introduction., • Lead and participate in 5S activities, Value Stream Mapping, Process Mapping, Kaizen Events, and planned costs savings projects plant wide., • Serve as a continuous improvement mentor for the plant floor staff and propagate the methodologies in the work culture. Implement and maintain end of line visual management boards., • Drive continuous improvement and problem solving in the manufacturing environment by reducing/eliminating waste., • Support planning department to provide support as needed., • Conduct continuous improvement exercises to define processes, aid in documenting standard work to formalize new processes and define production rates., • Layout new work areas and reorganize existing equipment to facilitate process improvements., • Support production by identifying and eliminating process limitations and bottlenecks., • Conduct time studies and line balancing projects to determine best practices and define standard work., • Ensure the proper and timely completion of assigned tasks and projects independently; act as a strong influence on colleagues to develop strong job skills, knowledge, and change management., • Effectively interact with colleagues ranging from plant floor employees to management., • Work closely with design engineering team to aid in test, analysis and timely implementation of alternate components and sub-assemblies., • Engage with applicable departments on a routine basis to stay informed of issues faced and subsequently resolve these issues timely and successfully., • Responsible for mentoring, training, and partnering with employees within various departments., • Responsible for managing multiple projects with excellent time and project management skills in a fast-paced environment to adhere to timelines., • Liaise and coordinate with maintenance personnel to identify and resolve maintenance issues., • Design, develop, test, source, and justify cost on various tools, machinery, and equipment for recommended manufacturing methods., • Provide adequate support with prompt resolution to customer complaints that includes conducting effective root cause analyses and implementing corrective actions., • Responsible for providing engineering support to all areas of manufacturing operations to drive continuous improvements in safety, product quality, delivery, and cost., • Develop product quality plans and inspection methodologies. 22. Comply with company policies, practices, and procedures., 23. Participate in proactive efforts to achieve departmental and company goals., 24. Work effectively and communicate clearly (oral and written) with other employees, customers, and vendors., 25. Handle changing deadlines and priorities., 26. Review work for accuracy, completeness, and proper authority. Supervisory Responsibilities No supervisory responsibilities. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Customer Service Communication Skills Planning and Organizing Continuous Improvement Safety Oriented Training/Development Technical Skills Initiative Quality of Decisions Customer First Focus Visual Management Teamwork Values and Ethics Dependable/Adaptable Action Oriented Result Driven Qualifications Education and/or Experience · Bachelor of Science degree in related field or equivalent 5 -10 years related experience in testing of air separation equipment or similar product, manufacturing and electrical trouble shooting, • Experience with quality improvement tools and techniques (lean manufacturing, six sigma, process control and failure mode & effects analysis), preferred., • Six sigma tools and methodology; green belt or black belt experience is a plus. Ability to work in a fast-paced work environment with multiple deadlines requirements. Ability to follow-up and manage workload effectively. Must be detailed oriented with strong organizational and prioritizing skills. Self-starter and able to work independently as needed. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to communicate (verbal and written) clearly and effectively. Mathematical Skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to draw, create and interpret bar graphs. Reasoning Ability Ability to solve practical problems and apply common sense understanding to carry out written, verbal or diagram instructions. Ability to interpret a variety of instructions furnished in written, oral, diagram, blueprints, schematics, or schedule form. Ability to use good judgement and logic. Ability to follow and enforce company policies and procedures. Computer Skills To perform this job successfully, an individual should have knowledge of ERP/MRP systems specifically Method of Manufacturing creation or EPICOR software, material requirement tracking, and data manipulation in Microsoft Excel and Word. Knowledge of Vantage ERP Engineering Workbench is a plus. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to walk and reach with hands and arms. The employee is occasionally required to stand. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. Work Environment The noise level in the office work environment is usually quiet; the production work environment can be noisy. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PCI is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. PCI is also a federal contractor. Employment may be contingent upon U.S. citizenship or valid "green card" holder status. This position requires use of information or access to hardware which is subject to the Internal Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee. Company DescriptionPacific Consolidated Industries, LLC. is headquartered in Riverside, CA. The Company was founded in 1986 to supply cryogenic air separation systems to the U.S. military and has since expanded its technology offerings to include membrane and adsorption-based air separation. The Company has grown to become a leading manufacturer of rugged, mobile liquid and gaseous oxygen and nitrogen generation systems for the Military, Oil & Gas, and Commercial Oxygen markets. The Company has established itself as a global leader in air separation technology with thousands of systems installed in over 40 countries.Pacific Consolidated Industries, LLC. is headquartered in Riverside, CA. The Company was founded in 1986 to supply cryogenic air separation systems to the U.S. military and has since expanded its technology offerings to include membrane and adsorption-based air separation. The Company has grown to become a leading manufacturer of rugged, mobile liquid and gaseous oxygen and nitrogen generation systems for the Military, Oil & Gas, and Commercial Oxygen markets. The Company has established itself as a global leader in air separation technology with thousands of systems installed in over 40 countries.

Job DescriptionSalary: $25.00 - $33.00 / Hour SureSite Consulting Group, LLC provides complete infrastructure deployment services through its teams of real estate, planning, and engineering, environmental, project management and construction management experts. Are you a proactive person with an in-depth knowledge of construction and/or the wireless industry? If you are a factual and detail-oriented person, this job is for you! As a Field Technician at SureSite, every day can be an adventure. You will be responsible for installing/repairing various telecommunications structures and hardware. We will provide necessary training and safety is always our highest priority. You will join a remarkable, hardworking team, that works side-by-side with industry experts. As a full-time tech, you will work approximately 40-50 hours/week, Monday-Friday and will be eligible for overtime. You will also have access to medical, dental and vision benefits as well as a company matched 401K! Essential Functions: • Hardware Installation Management (60%)- Work on a crew of three or four field technicians that will be installing, erecting, maintaining, repairing, removing, or retrofitting towers, Small Cell and rooftop antenna systems. Will also perform third party inspections., • Hardware Commissioning (10%)- Commission (test) hardware in accordance with the prevailing contractual share of the responsibility, specifications and quality requirements and document progress in the applicable Site Folder. Will also learn commissioning services under direction of the Site Foreman., • Documentation (5%)- Must log all installation, test, close out and inspection results as directed by the Construction Manager or Site Foreman and report hours worked daily., • Quality (20%)- Responsible to assist in escalating all QA deficiencies to the Site Foreman or Field Technician III that cannot be cleared., • Fault and Discrepancy Reporting (5%) Manage the contents of an assigned build kit for the issuance of fault and/or discrepancy reports to document kit churn. Assist in ensuring defective components are promptly returned for replacement processing and will document and report equipment and material shortages immediately., • Other- Assists the Site Foreman or Field Technician III on the installation of all network elements installed on site and other equipment as applicable and directed by management team. Job Requirements: • At least two years of construction, wind turbine installation, computer IT, solar installation or electrical experience., • High School Diploma/GED or higher, • Some knowledge of SWEEP and PIM equipment., • Some understanding of basic architecture of antenna systems., • Understand some RF Design for telecommunication sites - basic RFDS knowledge., • Knowledge of power and hand tools for construction., • Previous experience working aloft in man lifts, and/or climbing., • Some understanding of basic RF and grounding safety standards for installation., • Basic knowledge of either civil construction or electrical work., • Ability to work on laptop with MS Office., • Understand and speak English., • Valid drivers license for the preceding 3 years, • Have no major violations in the past 3 years (A major violation is any violation of any traffic law that may result in criminal charges and/or the suspension or revocation of your drivers license. Preferred: • Anritsu / PIM / fiber testing certification, • Connector certification (Andrew, PPC, CommScope, etc.), • Reports to: Typically, will report daily to either a Site Foreman or Construction Manager. Normal Work Environment: • The work environment is physically demanding, and you need to be able to perform all of the tasks safely and efficiently., • The position requires the use of standard installation equipment i.e. power tools, DC crimpers, thermoweld, hand tools, etc., • The position will require either working aloft on cell towers, in a man-lift, bucket truck or climbing., • Some work will be under adverse conditions (e.g. high towers, inclement weather, remote sites, etc.) throughout the US using safety equipment and hand, power and specialty tools., • Must be able to transport required equipment and materials to work locations including remote areas to perform functions of the job using appropriate company and specialty vehicles., • Must have a current drivers license with satisfactory record for the last three years., • Must be able to maintain constant communication and interact successfully with team to understand project requirements., • Must work well in a team environment and be able to work with a diverse group of people., • Exhibit a strong positive attitude toward and be diplomatic in resolving issues., • Overtime required as needed., • Must have the ability to lift 50 lbs. of equipment. AAP/EEO Statement: • We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are committed to providing a workplace free from discrimination and harassment, fostering a diverse and inclusive environment where all employees can thrive.

Job Description Job Summary: DT Professional Services is looking for a Satellite Communications Technician to support the Naval Surface Warfare Center (NSWC) Corona at our Norco, CA location! The ideal candidate will work independently or alongside Ku Band engineers and Information Systems Technicians to provide systems technical support for hardware acquisition, configuration, testing, and implementation of state-of-the-art antenna, RF, digital, and micro-electronic technologies. Additionally, you support systems integration and testing, data processing and data management, and IP based network architecture, design, and performance analysis. Academic and/or work experience should include exposure to satellite communication systems, RF and digital hardware design, baseband and digital signal processing, waveform design, signal detection and estimation, and synchronization theory. This role is for an early career engineering technician with an active DoD Secret Clearance and requires an estimated 50%+ travel per year (travel locations include Navy ships in the US). Responsibilities: • Install, operate, maintain and repair strategic satellite communications terminals and antennas, • Install, configure, operate, align, conduct performance testing, and perform unit and direct support maintenance on satellite communications equipment and associated devices, • Conduct stressed and unstressed network operations, • Perform quality control tests on circuits, trunk groups, systems, and ancillary equipment, • Install, operate, and maintain communication security devices, • Operate and perform maintenance and services on Ku Satellite communications equipment, • Provide technical assistance in the operation and maintenance of satellite communication systems, • Perform complex and multifaceted tasks associated with stressed and unstressed network operations, • Perform alignment, control functions, and direct support maintenance on assigned communications equipment, • Ensure backup equipment, spares, and repair parts are available to sustain system operations, • Must possess an active DoD Secret Clearance (or the ability to reinstate if active within the past 24 months), • Must be able to pass a background check, • Must possess a CompTIA Security+ certificate OR CompTIA Advanced Security Practitioner or ability to obtain within 60 days of hire, • Ability to travel an estimated 50%+ travel per year, travel locations will include Navy ships in the US, • High School Diploma or GED, • Basic computer and electronic skills, • Minimum of 1 year networking experience, • Experience or knowledge with Ku/X/C/Ka band Satellite Communications Systems, • Formal training and work experience in RF systems installation, operational analysis, troubleshooting, and repair, • Ability to climb, balance, stoop, kneel, sit, and lift up to 80 lbs, • Good interpersonal skills to interface with internal and external customers and vendors, • Customer service skills are essential, • Problem solving skills to troubleshoot varied problems within varied environments, • Ability to interpret technical drawings, manuals, and schematic diagrams, • Excellence with multi-tasking and the ability to quickly react to changes in priorities and timelines, • High sense of urgency that allows for success when working under pressure, • Ability to work independently and in a team-oriented, collaborative environment, • Ability to take direction and interact well with various levels of the organization and customer support organizations, • Ability to articulate problems, solutions, and technical support activities with customers, DoD sponsors, and other technical team members, • Must be efficient, organized and able to prioritize tasking, • Ability to follow instruction with little supervision and work in a fast paced learning environment, • Experience or knowledge in Network design, voice and data communications, • Working experience with Microsoft Office suite, • Operating System Training – Windows Server 2016 and/or Windows 10, • Familiar with configuring RF equipment such as satellite modems, spectrum analyzers, and various IP, Serial, and RF equipment (i.e., BUCs, FSK modems, antennas control units, LNBs, band pass filters, and GPS antennas), • Knowledge of terminating fiber optic, Cat 5, and serial cables, • Knowledge of RADHAZ and ability to do calculations, • Knowledge of HERO and HERP testing and analysis, • Knowledge of Earth Station support, • Knowledge of encryption devices, • Familiar with configuring networking equipment such as routers, switches, and PCs More about DT Professional Services: We’re looking for driven individuals to contribute to our talented & innovative team! At DT Professional Services, we offer insurance benefits that include medical, dental, and vision coverage, life insurance, long & short-term disability, 401(k) retirement plans (with employer match), tuition & certificate reimbursement, along with paid time off (vacation/sick/holidays). We are happy to to offer growth opportunities for you to grow in your career - your success is our success! DT Professional Services is an SBA 8(a) and HUBZone certified Small Business; highly experienced in building award-winning custom software solutions. Established in 2013, we bring over a decade of experience delivering technology services and solutions that specialize in web & custom application development, project & program management, mobile & cloud computing services. Our Mission is to provide cutting-edge, customer-oriented technology solutions that maximize value, drive engagement, and empower your business. We do this by employing talented & driven individuals who share the same goals and excitement for the work we do. DT Professional Services believes in fostering collaboration, career growth and building lasting relationships with our employees. Powered by JazzHR j69MOWPy9Z

Job Description The specific pay rate and level will depend on the successful candidate’s qualifications, prior experience and location. “Perks” • DailyPay Available!! Make any day a payday - You deserve to get paid any day!!, • 10 days + 2 half days Company Paid Holidays + vacation and sick time!, • Medical, Dental, and Vision benefit options, • 401(k) Retirement Plan with Company Match., • Company paid Life Insurance, • We also offer HSA, FSA, EAP and Pet Insurance!, • Safety and Recognition programs, • Boot Program, • Drug-Free, Safety-Focused Work Environment, • It’s a great place to work where you are given the space to share ideas and opinions and the bottom-line is “YOU” matter! “A Day in the Life” As a General Construction Modular Mechanic you will be responsible for general maintenance, general construction, remodeling work and preparation of buildings for delivery to customer sites. “What You’ll Do” • Installation of structures or fixtures such as windows, frames, floorings, trim or hardware using hand or power tools per plan, drawings and to current relevant building code, • Perform maintenance service, repairs and construction in the areas of plumbing, carpentry, painting, plastering, flooring, ceiling and electrical., • Perform construction work related to remodeling or modifying modular buildings, • Demolish, replace or construct walls, including framing, drywall and other finish-out functions, • Light electrical work; changing bulbs, rewiring or adjusting wiring within a frame or wiring for new connections, switches and outlets, • Light plumbing work; removing, remodeling or installing new plumbing pipes and fixtures, • Shape or cut materials to specified measurements as noted on building plans or reasonably implied, • Participate in and practice 5S and LEAN in the plan, • M-F 7:00am – 3:30pm (possible Saturday work based on production needs), • Performs other duties as assigned “Must Haves” • Able to work outside in variable weather conditions, • Ability to use both manual and power tools and follow operating guidelines, • Ability to use mathematics to calculate length, width, depth, etc. as it relates to construction and accuracy of specs and requirements, • Ability to follow spoken and written instruction and work in fast paced construction environment with minimal guidance from leads or supervisors, • Ability to safely perform all tasks and understand Company’s safety policies and procedures, • Deliver a high quality output consistent with the Company’s construction standards, • Able to take, record and follow standard measurements and cut or separate materials to specific measurements or quantities, • Prior experience in construction or related work required, • Prior experience with electrical, plumbing, HVAC or other specialties preferred, • Position requires manual dexterity and the ability to maintain physical activity for most of the day, • Must be able to lift up to 50 pounds and hold or lift a variety of objects, • Able to carry, bend, stoop, turn, kneel, crawl, climb a ladder and other manual labor activities Flexibility & Evolving Responsibilities This job posting is intended to convey the general nature and level of work expected in the role. It is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Responsibilities may evolve over time, and team members may be asked to take on additional tasks or adjust their focus in response to changing business needs—sometimes with or without prior notice. This flexibility is a valued part of our culture and supports our commitment to collaboration, agility, and shared success. McGrath will continue pre-employment drug testing including marijuana, even in states where it is legal, for this position which is classified as safety-sensitive within our construction operations and Drivers. Ensuring a drug-free environment is not only essential for the well-being of our team members but also aligns with regulatory requirements that govern safety-sensitive positions and commercial driving. Pre-employment screenings are conducted after a conditional offer of employment is extended, in accordance with fair hiring laws. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, on the basis of disability and any other legally protected status. Our company uses E-Verify to confirm employment eligibility. #MMMC

Job Description CROWN ACE HARDWARE IS NOW HIRING IN JURUPA VALLEY YARD/SALES POSITION Crown Ace Hardware is that kind of place! We are focused on providing world class service to our customers and our employees. We thrive in a fun and challenging environment. Together with Ace we are proud to have won the JD Powers Award for Customer Service 16 years. That’s how we do it! Our Vision is to be “The most helpful hardware stores on the planet” by providing an “Amazing Customer Experience” every time. APPLY NOW! Job Description Yard associate Position Summary: The Yard Associate's primary responsibility is to consistently providing our customers world class customer service which will support our mission of being "the most helpful hardware stores on the planet!" Yet, outstanding service is not enough. • Capable of handling and loading merchandise ranging from lumber to cement in to the customers' vehicles, • Responsible for merchandising product, maintaining specific areas, and supporting the store management team., • A personality and approach that strongly represents our Core Values and Expectations is required. The major responsibilities for this position include but are not limited to the following: • Participate in the processing of new shipments and help the team to keep the receiving and back room areas clean and organized., • Uphold store cleanliness standards., • Responsive of safety issues., • Puts "Customers First, Tasks Second." The minimum requirements for this position include: Education/Training: High School diploma or GED equivalent. Experience: Trade skills accompanied by a personality that will support our Core Values and mission. Skills/Knowledge: A commitment to service excellence and customer satisfaction. Solid team player with excellent interpersonal skills. Excellent communication skills, exceptional organizational ability, high attention to detail, and ability to multi-task. Ability and willingness to work flexible hours including evenings, weekends and holidays to meet the needs of the business. Physical Requirements: The minimum physical requirements for this position include but are not limited to: Must be able to lift 90+ pounds frequently to load and unload customer orders, Yard Associates working in the Lumber or Nursery departments will need to have the ability to lift 100 pounds and carry 50 pounds. Ability to stand for extended periods of time. Ability to hear, understand and communicate orally and in writing to communicate with staff and customers a normal in-person and phone conversation. Ability to bend and twist, push and pull, stoop, and kneel. Ascend and descend ladder. Ability to work at heights. Experienced in forklift, skip-loader and power saw use. License and Certificates: Upon hire must be willing to obtain and maintain forklift certification (where applicable.) Salary $17 - $17.50 to start Applicant CCPA Pre-Collection Notice We collect Personal Information from you in connection with your application for employment with Crown Hardware, Inc and Lifestyle Hui, LLC, including the following categories of PI: identifiers, personal records, commercial information, professional or employment information, non-public education records, and inferences drawn from your PI. We collect your PI for our purposes, including performing services and operations related to your potential employment. For additional details or if you have questions, contact us at . For avoidance of doubt, no portion of the CCPA Policy other than this Applicant CCPA Pre-Collection Notice shall apply to information we collect about job applicants who are California Consumers (i.e., California residents). Powered by JazzHR kgA5LCyXeJ

Job Description CROWN ACE HARDWARE IS HIRING SEASONAL CASHIER Crown Ace Hardware is hiring! We are focused on providing world class service to our customers and our employees. We thrive in a fun and challenging environment. Together with Ace we are proud to have won the JD Powers Award for Customer Service 16 years. That’s how we do it! Our Vision is to be “The most helpful hardware stores on the planet” by providing an “Amazing Customer Experience” every time. WE ARE MUCH MORE THAN JUST A HARDWARE STORE Position Summary: The Cashiers' primary responsibility is to demonstrate the foundation of our service to each customer as they enter and leave the store, and support our mission statement of being the most helpful hardware stores on the planet! The ability to truly leave a positive impact on our customers is the goal for every cashier. An enthusiastic, positive and supportive attitude is essential. • Ensure each customer receives outstanding service, • Greet customers as they enter the store., • Answer phone calls with proper greeting., • Maintain awareness of all promotions and advertisements., • Accurately and efficiently ring on registers and maintain all cash at registers. Education/Training: High School diploma or GED equivalent or a current student. Experience: Experience in a retail environment either in cashier or sales, a plus. Will train Experience in other "people focused" positions or endeavors. Skills/Knowledge: Solid team player with excellent interpersonal skills with a strong willingness to learn. Ability and willingness to work flexible hours including evenings, weekends and holidays to meet the needs of the business. A commitment to service excellence and customer satisfaction. Physical Requirements: The minimum physical requirements for this position include but are not limited to: • Must be able to lift up to 30 pounds occasionally., • Move and handle boxes of merchandise and fixtures throughout the store, which entails lifting and perform all functions as set forth., • Ability to stand for extended periods of time., • Ability to hear, understand and communicate orally and in writing to communicate with staff and customers a normal in-person and phone conversation. Applicant CCPA Pre-Collection Notice We collect Personal Information from you in connection with your application for employment with Crown Hardware, Inc and Lifestyle Hui, LLC, including the following categories of PI: identifiers, personal records, commercial information, professional or employment information, non-public education records, and inferences drawn from your PI. We collect your PI for our purposes, including performing services and operations related to your potential employment. For additional details or if you have questions, contact us at . For avoidance of doubt, no portion of the CCPA Policy other than this Applicant CCPA Pre-Collection Notice shall apply to information we collect about job applicants who are California Consumers (i.e., California residents). Powered by JazzHR 5ztJQGPcIm

Job Description Perfect Margin Door Company was founded to meet market demand for excellence, flexibility and efficiency in the architectural door industry. We're on a mission to assemble a team of dynamic, intelligent and qualified individuals who are guided by our foundational principles of quality, integrity and service. If you're ready to combine industry expertise with exceptional customer service to deliver unparalleled experiences in commercial doors, frames and hardware, we want you! We are expanding our team and seeking enthusiastic and dedicated leaders. If you are an experienced and detail-oriented Commercial Door Project Manager, we invite you to apply. In this role, you will oversee projects, ensure deadlines are met, and lead a support team of professionals to guarantee all commercial door installations meet our high standards for quality, profitability and customer satisfaction. Immediate, Full-Time Positions Available. Key Responsibilities: • Manage multiple commercial door installation projects simultaneously while ensuring timely completion and, • adherence to budget constraints., • Collaborate with clients to define project scope, goals, and deliverables., • Develop and maintain project schedules, anticipating potential risks and obstacles., • Coordinate with subcontractors, suppliers, and internal teams to facilitate smooth operations., • Monitor and report on project progress, addressing any issues proactively to minimize delays., • Ensure compliance with safety regulations and industry standards throughout the project lifecycle., • Conduct site visits to assess project requirements and quality control., • Prepare and maintain comprehensive project documentation, including contracts, reports, and change orders., • Provide exceptional customer service and maintain strong client relationships. Qualifications: • Bachelor’s degree in construction management, Project Management, or a related field preferred., • 3-5 years of experience in project management, specifically within the commercial door or construction industry., • Proven track record of managing successful projects with on-time and within-budget delivery., • Strong knowledge of commercial door systems, installation techniques, and relevant building codes., • Excellent organizational, time management, and problem-solving skills., • Proficient in project management software and MS Office Suite., • Strong communication and interpersonal skills., • Ability to work independently and as part of a team. What We Offer: • Competitive salary and benefits package., • Opportunity to work on diverse architectural, industrial, and commercial projects., • Supportive and collaborative work environment., • Opportunities for professional development and growth., • Pathways for career advancement. How To Apply: Interested candidates should submit their resume and a cover letter detailing their relevant experience to . Please include “Commercial Door Project Manager Application” in the subject line. Equal Opportunity Employer: Perfect Margin Door Company is committed to creating and maintaining a diverse and inclusive work environment. We are an equal opportunity employer and do not discriminate based on race, color, religion, sex, national origin, age, disability, marital status, sexual orientation, gender identity, or any other characteristic protected by applicable law. We believe that a diverse workforce enhances our ability to meet the needs of our clients while fostering creativity, innovation, and collaboration. We welcome applicants from all backgrounds and are dedicated to providing a workplace free from discrimination and harassment. At Perfect Margin Door Company, we value and promote equality, and we are dedicated to implementing fair employment practices and ensuring equal opportunity for all employees and applicants. Join us at Perfect Margin Door Company and play a key role in delivering high-quality commercial door solutions to our clients. We look forward to meeting you! Company DescriptionPerfect Margin Door Company isn’t just building doors — we’re opening opportunities! We’re answering the industry’s call for excellence, flexibility, and innovation with a team of bold, skilled professionals who live by our core values: quality, integrity, and service. If you’re ready to bring your expertise, energy, and customer-first attitude to a company that values craftsmanship and teamwork, your next great career starts here!Perfect Margin Door Company isn’t just building doors — we’re opening opportunities! We’re answering the industry’s call for excellence, flexibility, and innovation with a team of bold, skilled professionals who live by our core values: quality, integrity, and service. If you’re ready to bring your expertise, energy, and customer-first attitude to a company that values craftsmanship and teamwork, your next great career starts here!

Job DescriptionSalary: 65000-80000 annually TENAX Technologies is currently seeking a skilled Systems Administrator to maintain servers, data storage, computers, and software applications in service of the Air National Guard (ANG) Remotely Piloted Aircraft (RPA) Special Operations Center (SOC). The Systems Administrator will interface with fellow contractors, military personnel, and government clients in support of server, computer, and software systems in addition to providing direct hands-on expertise to install and maintain system architectures for the RPA-SOC, which operates 24/7/365. The ideal candidate will have a solid understanding of hardware and software systems, video encoding and recording, communications systems, and enhancement support for operations. Key Responsibilities Maintain the availability, reliability, operations, and administration of the RPA-SOC servers, data storage, computers and software applications supporting RPA missions. Backup data and key equipment configurations, deploy patches as directed by program management office, and perform Active Directory Administration. Analyze, troubleshoot, and maintain RPA-SOC computer and server systems including troubleshooting hardware, software, operations support for Microsoft Windows and other operating systems at multiple classification levels. Ensure proper configuration of servers, virtual servers, storage solutions, computer, and software necessary for the successful operation of the RPA-SOC while staying in base line compliance requirements. Determine hardware, software, system functionality, test and modify workstations and programs based on user specifications. Many of the systems are unique, one of a kind that are constantly evolving to meet mission needs. Participate in on-call rotation for after-hours support. Requirements +/- 5 years of experience with SAN (Storage Area Network), Server/Virtual Server, backups/data retention, software installation/patching, and Active Directory administration Experience with Server/computer hardware/operating systems, video encoders/decoders, storage solutions on Commercial-off-the-shelf (COTS) equipment like Dell. Knowledge of industry best practices for implementing, and maintaining security and service availability throughout the system life cycle Ensure software and equipment meet applicable security technical implementation guides (STIGs) Identify technical applicability, remediate, and support mitigation of IAVA notices and support metric reporting. Experience in VMWare virtualized environment. Support and engage in programs, projects and practices and strategy, and comply with all policies and procedures. Follow industry and department trends and developments to ensure services are consistent with, and/or superior to, industry best practices. Knowledge of computer networking and network-based information assurance devices This position involves work typical of an office environment with no unusual hazards. There is occasional lifting up to 30 pounds. Ability to work independently and in a team environment. Strong problem-solving skills. Clearance Requirement: An active TS clearance with eligibility for TS/SCI is required. Mandatory Requirement: Security+ CE Certification or similar DOD 8570 IAT II certification. Preferred Qualifications: Other desired certifications include: MCSA, MDAA, CCNA, VMWare VCTA. Job Type: Full-time Pay: From $60,000.00 per year Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Referral program Retirement plan Tuition reimbursement Vision insurance Experience level: 5 years Schedule: 10 hour shift 12 hour shift Day shift Evening shift Night shift License/Certification: CompTIA Security+ (Required) Security clearance: Top Secret (Required) Work Location: In person

Job DescriptionIT Support Engineer We are looking for a skilled IT Support Services professional to join our team and deliver outstanding technical assistance to our employees and clients. The IT Support Services associate will be responsible for diagnosing, troubleshooting, and resolving issues related to hardware, software, and network systems. This role requires strong analytical skills, technical knowledge, and a customer-oriented approach to help users resolve their IT challenges efficiently. Key Responsibilities: • Provide frontline IT support, responding to technical issues submitted through phone, email, and ticketing systems within agreed-upon SLAs., • Diagnose and resolve hardware, software, and network issues on desktops, laptops, mobile devices, and printers., • Install, configure, and update operating systems, software, and hardware for new and existing users., • Manage user accounts, including setting up new accounts, handling password resets, and managing permissions., • Troubleshoot network issues, including Wi-Fi connectivity, VPN access, and network printer issues., • Document solutions and troubleshooting steps for recurring issues and update the knowledge base for future reference., • Monitor and maintain IT systems and networks to proactively identify potential issues and prevent disruptions., • Collaborate with other IT team members and escalate complex issues to senior engineers as needed., • Support IT projects such as system upgrades, software deployments, and network expansions., • +2 years experience with Microsoft Networks, firewall configuration, network configuration, workstation setup and installation, print management, integrating cloud technology. network and endpoint security, TCP/IP protocols, Active Directory and Group Policy management, Powershell, technical process and procedure documentation., • Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers, • Excellent computer proficiency (MS Office - Word Excel and Outlook), • Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service, • Ability to work independently and to carry out assignment to completion within parameters of instructions given, prescribed routines, and standard accepted practices, • High School diploma or GED required, • Associate degree preferred Preferred Experience:, • Experience with ConnectWise, • Certifications such as CompTIA A+, Network+, or Microsoft Certified Solutions Associate (MCSA)., • Experience with cloud platforms like AWS, Azure, or Google Workspace. Benefit Highlights • Competitive benefits package, including medical, dental, vision, and life insurance, • 401k match, • Flexible PTO, • 10 Holidays including your Birthday and a Floating Holiday!, • Gym reimbursement, • Amazon Prime reimbursement, • 40 Hours for Volunteer Time, • Paid Maternity and Paternity leave, • Paid certifications Powered by JazzHR eKpvJIKm99

Job DescriptionFrom Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, Space, and Commercial Airline sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. We are seeking a highly skilled IT Help Desk Specialist with a strong background in aerospace manufacturing IT environments and proven knowledge of CMMC (Cybersecurity Maturity Model Certification) and NIST (National Institute of Standards and Technology) frameworks. The ideal candidate will have at least 5 years of professional experience providing technical support, ensuring compliance with cybersecurity standards, and supporting mission-critical systems in a regulated industry.Job Responsibilities: • Provide first- and second-level technical support for hardware, software, and network issues across the organization., • Troubleshoot and resolve IT incidents in a timely manner, escalating complex issues when necessary., • Maintain compliance with CMMC and NIST 800-171 requirements in daily IT operations., • Support systems used in aerospace manufacturing, including ERP, MES, and CAD/CAM applications., • Assist with audits, documentation, and reporting related to cybersecurity and regulatory compliance., • Collaborate with IT security teams to enforce security policies and procedures., • Train and support end-users on secure IT practices and compliance requirements., • Maintain accurate records of IT assets, tickets, and resolutions in help desk systems., • Able to support on-site full-time in Ontario, CA., • Occasional travel to alternate site in Riverside, CA.Required Qualifications:, • Minimum 5 years of IT help desk or technical support experience in a regulated industry (aerospace preferred)., • Strong knowledge of CMMC compliance levels and NIST cybersecurity standards., • Experience supporting IT systems in manufacturing environments., • Proficiency with Windows, Linux, and network troubleshooting., • Familiarity with Active Directory, Office 365, Cloud-based, and endpoint security tools., • Excellent communication skills and ability to work with cross-functional teams., • Strong documentation and organizational skills.Preferred Qualifications:, • Prior experience in aerospace or defense manufacturing IT support., • Certifications such as CompTIA Security+, Network+, CISSP, or CMMC Assessor., • Experience with ERP/MES systems and CAD/CAM software support.