Hardware jobs in Syracuse, New YorkCreate job alerts

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: * Define and develop RF system architectures for radar and advanced sensing applications. * Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. * Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. * Conduct trade studies and system optimization to balance performance, cost, and schedule. * Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. * Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. * Perform root cause analysis of system performance issues and recommend design changes. * Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. * Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. * Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. * Demonstrated experience deriving and validating system-level RF budgets. * Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. * Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. * Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. * Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). * US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: * Experience in phased-array architectures and beamforming. * Knowledge of military/aerospace standards and environmental testing. * Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Saab, Inc. is seeking experienced Field Service Representatives with technical background and experience in operating, maintaining, troubleshooting, and/or repairing Radars, Air and Missile Defense, Command and Control (C2), or other advanced weapons systems. This hands-on role requires extensive short-notice travel, with some assignments lasting more than two months. Candidates must be able to work effectively in demanding operational environments, both independently and as part of a team. The ideal candidate possesses strong technical problem-solving skills, a desire to help others, and comfort training customers in both formal and on-the-job settings. Experience in a Military Occupational Specialty (MOS) or Air Force Specialty Code (AFSC) supporting advanced weapons systems such as: 14X, 1CX, 1D7, 1Z3, 2171, 2848, 2887, Electronics Technician or Fire Controlman. This position offers the opportunity to work with cutting-edge defense technologies and contribute directly to mission success. Responsibilities include: * Diagnosing, troubleshooting, repairing, and debugging complex systems utilizing manuals, schematics, and reach back support for various electro/mechanical issues that may arise. * Troubleshooting and resolving complex issues independently or in collaboration with others. * Reporting design, reliability, and maintenance problems or bugs to design and software engineering teams. * Serving as the primary interface with customers while on site. * Supporting other company functional areas such as customer installation and training. * Delivering training to customers on the operation and maintenance of Saab products. Compensation Range: $70,200 - $87,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * High School Diploma, or BA/BS degree in an engineering discipline is preferred. * 2+ years of experience in a related field OR 4+ years of relevant military service as an Air Defense or Battle Management system operator/maintainer. * Must hold, or have previously held, a U.S. DoD SECRET Clearance. * Must be capable of lifting and removing/replacing components weighing up to 50 pounds. Desired Qualifications: * Experience operating, maintaining, troubleshooting and/or repairing complex weapon and/or command and control components. * Ability to perform preventive and corrective maintenance actions in accordance with established procedures. * Ability to identify, develop, and execute system troubleshooting or maintenance actions that go beyond the scope of written procedures. * Strong problem-solving and analytical skills applied to diagnosing and repairing radar components, hardware, and operating systems. * Proficiency with common diagnostic test equipment, including digital multimeters (DMM) and oscilloscopes. * Recognizes performance degradation and provides actionable recommendations to restore or enhance system efficiency. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description About the Role We’re hiring a Lead Carpenter (Working Foreman) to run small crews and perform hands-on carpentry. You’ll set the pace on site, coordinate daily tasks, and ensure quality, safety, and productivity. Long-term role with steady hours and growth potential. What You’ll Do • Lead & Coordinate, • Run daily huddles; assign tasks to laborers and helpers., • Read drawings/specs; perform layout, verify dimensions, and plan work sequences., • Coordinate with PMs/superintendents, subs, and deliveries; maintain site logistics., • Enforce safety (JHAs, PPE, housekeeping) and site standards; complete daily reports., • Carpentry (Hands-On), • Rough carpentry: framing, blocking, backing, temporary protections, forms/shoring., • Finish carpentry: trim, doors/frames/hardware, cabinets, casework, millwork installs., • Set and plumb walls, install sheathing, subfloors, windows, stairs/rails as needed., • Scaffold and temporary structure builds/demobilizations (scaffold cert a plus)., • Site Support, • Material takeoffs; order/pick up materials; stage tools and equipment., • Quality control, punch-lists, and closeout support., • Valid driver’s license and reliable transportation., • Effective English communication for safety briefings, written instructions, and radio calls., • OSHA 10 required (provide card); OSHA 30 a plus., • 3–5+ years professional carpentry experience, including leading small crews., • Can regularly lift 25–50 lbs, work at heights/ladders/scaffolds, and outdoors in all weather., • On time, follows directions, thinks on their feet, and models safe, positive behavior., • Scaffold user certification; telehandler/forklift; First Aid/CPR; fall-protection training., • Laser level/layout skills, door & hardware experience, drywall backing, concrete forms., • Basic digital reporting (photos, daily logs).Company DescriptionAhearn Holtzman Inc. is a dynamic and rapidly growing construction firm with a strong reputation for delivering high-quality infrastructure and mission-critical projects. What began as a Metro New York operation has now expanded across the Northeast, Midwest, and Mid-Atlantic regions, with continued growth on the horizon. We take pride in fostering a culture of professional development, operational excellence, and long-term career growth. As we continue to expand our project footprint and service capabilities, we’re actively building a team of talented individuals who want to grow with us. Join us and be part of a company where your work is valued, your voice is heard, and your future is full of opportunity.Ahearn Holtzman Inc. is a dynamic and rapidly growing construction firm with a strong reputation for delivering high-quality infrastructure and mission-critical projects. What began as a Metro New York operation has now expanded across the Northeast, Midwest, and Mid-Atlantic regions, with continued growth on the horizon.\r\n\r\nWe take pride in fostering a culture of professional development, operational excellence, and long-term career growth. As we continue to expand our project footprint and service capabilities, we’re actively building a team of talented individuals who want to grow with us.\r\n\r\nJoin us and be part of a company where your work is valued, your voice is heard, and your future is full of opportunity.

Job Description Armstrong has an opening for a Tool Crib Attendant F/T on first shift. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, vision, medical, accident, cancer and critical care insurance and safety awards. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is and it shows many of the exciting aspects of our company! Take a look! The Salary Range for our Tool Crib Attendant job is $17.00-$20.00 per hour. Refer to the job description below: The Tool Crib Attendant organizes and maintains the machine shop tool crib including tool setups (presetting), issuing fixtures and gauges and managing the perishable tool supply. Job Responsibilities • Sets tooling for CNC machine tools as required prior to machine set up., • Assembles necessary fixtures, gauges, etc. for issue with setup package., • Develops and maintains a tool bill of material database., • Coordinates with outside services to manage the perishable tool inventory., • Loads programs into and out of shop machine tools. Maintains organization of program directories and revision control., • Manages storage and databases for tools, fixtures, component parts, and assembly hardware., • Tears down and inventories tool assemblies and components upon job completion., • Completes and/or maintains required reports and records., • Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping., • Maintains regular on-time attendance and adheres to company policies, procedures, and standards of conduct., • Proactively supports the ISO process approach to quality management and the Syteline MIS system., • High school graduate or equivalent with good math skills, • Strong mechanical aptitude, • Experience using close tolerance measuring devices is a plus., • Strong attention to detail. Ability to walk, remain on feet for extended time periods, reach, stoop, kneel and lift up to and including 35 pounds as needed. Visual abilities and manual dexterity. AAP/EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees* If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at 315-437-1517 or by email to . • unless an employee reasonable accommodation would result in undue hardship. Job Posted by ApplicantPro

Job Description Material Handler $16.00-$18.00 per hour depending on experience Job Duties • Maintain a safe work environment for all employees, • Work closely with the inventory group to monitor supply levels and submit purchasing recommendations on a regular basis, • Maintain an accurate inventory of associated hardware and kit material per order, • Perform monthly audits and cycle counts, • Collaborate with the material control coordinator and supervisor to determine when there are discrepancies in deliveries., • Verify all orders are complete with no quality issues., • Assist in packing and receiving department in loading and unloading product. Education and Experience • Millwork experience preferred., • High School diploma or equivalent, • Computer skills, • Valid Driver’s license Requirements • Proper personal protective equipment is required to be worn when in the warehouse and factory., • Ability to lift over 50 lbs., • Ability to work overtime and including weekends when needed. Apply now for consideration!

Job Description Join our team of technical professionals as a 2-Way Radio and Technical Systems Installer. Build a career installing and servicing critical communications and technical support systems for industry, emergency services, health care and education. Earn professional certifications and work directly with our customers. Provide workmanship of the highest quality in the installation and maintenance of sophisticated electronic equipment and systems. Present a professional attitude and maintain a great work ethic. We sell, service, design and install radio repeater systems, fire station alerting systems, public address equipment, distributed antenna systems, cell phone booster systems, security camera systems, access control systems, uninterruptible power supplies, servers, switches, PTP Links and more. Systems include all types of mounting hardware, cables, antennas, operator interface computers, devices and power. Responsibilities Install all system components in accordance with industry standards and best practices. This work is on our customers’ commercial and industrial properties and not residential. System component installations include installing ethernet, RF coaxial, fiber cables, antennas and equipment in ceilings, through walls, inside and outside of buildings, in equipment rooms, on rooftops and anywhere that our commercial customers are located. Cables and equipment may be installed in offices, emergency and 911 communication centers, hospital emergency rooms, school bus garages, steel refinery, factories, warehouses or other industrial buildings, office buildings, police and fire departments, correctional facilities, airports and more. You will build and wire up racks of equipment to specification and deliver the equipment to the customer site. Equipment may be delivered in a pickup truck, trailer, or leased box truck with lift gate. A valid driver’s license and clean driving record is required. You will be responsible for driving a company vehicle. Work directly with our customers to ensure their needs and expectations are met. Plan installation procedures and manage projects to completion. Verify the needed parts and material are available and complete all required paperwork on time. Ensure that all work is carried out in accordance with the applicable safety protocol. You will use an extension ladder, mobile hydraulic man lift, equipment dolly, hand and power tools and be 10 Hour OSHA qualified to act as the responsible party for safety on site. The position requires basic computer skills including email, spreadsheets and various computer and phone applications. You will prepare and maintain clear and orderly project documentation and be responsible for keeping company and customer data secure. Participate in the Field Department’s responsibilities for inventory, scheduling vehicle maintenance, training, customer satisfaction and finding new opportunities. Be available to travel out of town on occasion to meet customer needs and for training. Qualifications High School Diploma or GED Demonstrated mechanical aptitude to understand, apply, and troubleshoot mechanical principles, tools, and systems. Must physically be able to lift 50 lbs., work holding tools overhead, maneuver into and out of awkward spaces and work on ladders and other elevated locations. Stand for extended periods of time, hike some distance up a hill to a remote communications tower location and occasionally work outside in inclement weather. Candidates must have the ability to work independently, enthusiasm for learning new skills, be motivated to research to find new methods and to take pride in their professional craft. Ability to prepare for advancement and achieve industry standard certifications including Motorola R56 Communications Site installer, ETAI Certified Electronics Technician Journeyman Prefer: Hands-on electromechanical systems installation and repair experience. Computer networking and installation expertise. Expert use of hand and power tools. Formal Electronics and Information Technology Education and Training. Ability to work from blueprints, schematics and drawings and participate in system design. Compensation: Full Time Hourly Position $25.00 to $35.00 per hour Full Benefits package

Job DescriptionSalary: 65,000-80,000 TENAX Technologies is currently seeking Network Specialists to provide systems, application, communications and network systems support in service of the Air National Guard (ANG) Remotely Piloted Aircraft (RPA) Special Operations Center (SOC). The Network Specialist will interface with fellow contractors, military personnel, and government clients in support of network infrastructures supporting RPA in addition to providing direct hands-on network expertise to install and maintain network architectures for the RPA-SOC, which operates 24/7/365. The ideal candidate will have a solid understanding of network technologies, protocols, and standards required to integrate and sustain information transport systems. Key Responsibilities Provide ongoing support of communications and network systems architecture, video distribution, long-haul communications systems, and enhancement support for operations. Analyze, troubleshoot, and maintain RPA-SOC computer and network systems including hardware, software, operations support for Microsoft Windows and other operating systems at multiple classification levels.LAN/WAN communications, firewalls, operations support for Microsoft Windows operating systems, and networks at multiple classification levels. Ensure proper configuration of servers, virtual servers, storage solutions, computer, and software necessary routers, switches, firewalls, crypto and other communications equipment necessary for the successful operation of the RPA-SOC. Maintain accurate records of service requests and resolutions. Participate in on-call rotation for after-hours support. Requirements +/- 5 years of experience with network design, testing, development, and integration Experience with LAN/WAN, cryptographic equipment, multicast routing on Commercial-off-the-shelf (COTS) equipment such as Cisco. Knowledge of industry best practices for designing, implementing, and maintaining network security and service availability throughout the system life cycle. Ensure network and equipment meet applicable security technical implementation guides (STIGs). Identify technical applicability, remediate, and support mitigation of IAVA notices and support metric reporting. Experience in VMWare virtualized environment. Follow industry and department trends and developments to ensure services are consistent with, and/or superior to, industry best practices. Knowledge of computer networking and network-based information assurance devices. Ability to work independently and in a team environment. Strong problem-solving skills. This position involves work typical of an office environment with no unusual hazards. There is occasional lifting up to 30 pounds. Clearance Requirement: An active TS clearance with eligibility for TS/SCI is required. Mandatory Requirement: Security+ CE Certification or similar DOD 8570 IAT II certification. Preferred Qualifications: Other desired certifications include: MCSA, MDAA, CCNA, VMWare VCTA.

Job DescriptionWho is Flock? Flock Safety is the leading safety technology platform, helping communities thrive by taking a proactive approach to crime prevention and security. Our hardware and software suite connects cities, law enforcement, businesses, schools, and neighborhoods in a nationwide public-private safety network. Trusted by over 5,000 communities, 4,500 law enforcement agencies, and 1,000 businesses, Flock delivers real-time intelligence while prioritizing privacy and responsible innovation. We’re a high-performance, low-ego team driven by urgency, collaboration, and bold thinking. Working at Flock means tackling big challenges, moving fast, and continuously improving. It’s intense but deeply rewarding for those who want to make an impact. With nearly $700M in venture funding and a $7.5B valuation, we’re scaling intentionally and seeking top talent to help build the impossible. If you value teamwork, ownership, and solving tough problems, Flock could be the place for you. Pay: $57,200/year + overtime eligible + stock options + perk/benefitsTravel: About 90% – fly to job sites for 1–2 weeks at a time The Job Join our Field Operations team and help keep communities safe by installing cutting-edge camera and solar equipment. You’ll work outdoors, use your hands, and see your work making an impact right away. What you’ll do: * Install poles, solar panels, batteries, and license plate reading cameras * Work at heights up to 30 ft using ladders and bucket trucks * Use power tools, dig post holes, and make light repairs to irrigation or wiring * Drive company vehicles and tow small trailers * Meet with customers and complete site surveys * Keep track of inventory and submit job photos through a mobile app * Follow all safety standards and traffic control plans What We’re Looking For: * Comfortable with physical work: bending, climbing, lifting up to 50 lbs * Experience in construction, electrical, low-voltage wiring, or similar work a plus * Handy with tools and comfortable working outdoors in all weather * Able to drive vans and trucks (must be 21+ with a valid driver’s license) * Basic computer skills and willingness to learn new tech Feeling uneasy that you haven’t ticked every box? That’s okay; we’ve felt that way too. Studies have shown women and minorities are less likely to apply unless they meet all qualifications. We encourage you to break the status quo and apply to roles that would make you excited to come to work every day. The Perks * Flexible PTO: We seriously mean it, plus 11 company holidays. * Fully-paid health benefits plan for employees: including Medical, Dental, and Vision and an HSA match. * Tools & Gear: Flock Safety-branded uniforms, tools, and safety gear as well as an annual $250 uniform expense allowance * Work Vehicle: The use of a well-equipped Flock Safety owned Sprinter van and fully-paid-for gas card * Family Leave: All employees receive 12 weeks of 100% paid parental leave. Birthing parents are eligible for an additional 6-8 weeks of physical recovery time. * Fertility & Family Benefits: We have partnered with Maven, a complete digital health benefit for starting and raising a family. Flock will provide a $50,000-lifetime maximum benefit related to eligible adoption, surrogacy, or fertility expenses. * Spring Health: Spring Health offers a variety of mental health benefits, including therapy, coaching, medication management, and digital tools, all tailored to each individual's needs. * Caregiver Support: We have partnered with Cariloop to provide our employees with caregiver support * Carta Tax Advisor: Employees receive 1:1 sessions with Equity Tax Advisors who can address individual grants, model tax scenarios, and answer general questions. * ERGs: We want all employees to thrive and feel like they belong at Flock. We offer three ERGs today - Women of Flock, Flock Proud, and Melanin Motion. If you are interested in talking to a representative from one of these, please let your recruiter know * WFH Stipend: $150 per month to cover the costs of working from home. #ZR Flock is an equal opportunity employer. We celebrate diverse backgrounds and thoughts and welcome everyone to apply for employment with us. We are committed to fostering an environment that is inclusive, transparent, and collaborative. Mutual respect is central to how Flock operates, and we believe the best solutions come from diverse perspectives, experiences, and skills. We embrace our differences and know that we are stronger working together. If you need assistance or an accommodation due to a disability, please email us at . This information will be treated as confidential and used only to determine an appropriate accommodation for the interview process. At Flock Safety, we compensate our employees fairly for their work. Base salary is determined by job-related experience, education/training, as well as market indicators. The range above is representative of base salary only and does not include equity, sales bonus plans (when applicable) and benefits. This range may be modified in the future. This job posting may span more than one career level. Compensation Range: $57.2K

Job DescriptionSenior Strategic Account Executive - Remote DISHER is partnering with an IT and hardware services company that is a leading provider of new and refurbished networking, telephony hardware, and data center cabling products, as well as full-service IT lifecycle solutions. As the largest secondary market network hardware provider in North America, they remain focused on delivering creative lifecycle management solutions for organizations of all sizes, worldwide. As a Senior Strategic Account Executive, you’ll play a key role in driving new business, expanding existing accounts, developing long-term relationships with key decision makers, and delivering innovative, customer-focused IT hardware and service solutions. What it's like to work here: Headquartered in Syracuse, NY, this company has been serving their customers for over 40 years. They pride themselves on a culture of innovation, integrity, and customer focus. Their team is passionate about helping organizations extend the life of their technology while reducing costs and environmental impact. The base salary range for this role includes base salary and incentive compensation. Incentive earnings are uncapped, offering significant upside potential.What you will get to do: • Develop and maintain relationships with key customers., • Identify new business opportunities to both existing customers and new prospects., • Manage sales orders and provide status in the form of sales reports and forecasts to the manager and/or the management team., • Maintain and grow sales within existing territory of accounts and prospects by expanding the depth of products being sold., • Actively search for, find, develop and close new business., • Achieve and exceed monthly, quarterly and annual sales goals., • Accurately forecast monthly margin opportunity pipeline., • Participate as a collaborative member of a sales team and sales territory., • Actively and accurately utilize CRM system., • Attend sales and product training as required., • Create and execute territory management plan., • Assume additional responsibilities as required.What will make you successful:, • Bachelor’s degree in Business, Sales Management or related field preferred., • 10+ years of B2B IT network and data center hardware and associated services sales experience with a proven track record of growing customer base and sales volume., • Skilled in solution-based selling, with the ability to understand customer challenges and deliver tailored IT hardware and services solutions that meet business needs., • Excellent presentation, negotiation and persuasion skills., • Proven success prospecting, building a pipeline, moving opportunities through the sales cycle., • Ability to propose, present and discuss solutions with C-level and decision makers., • Self-disciplined and motivated to achieve sales goals., • Ability to organize and manage multiple priorities, while demonstrating strong attention to detail, appreciation of deadlines and commitment to follow-up is essential., • Exhibit strong teamwork and interpersonal skills.

Job Description INTRODUCTION Company Overview: This position is available with Upstate HomeCare, a BioMatrix company. BioMatrix is a nationwide, independently-owned infusion pharmacy with decades of experience supporting patients on specialty medication. Our compassionate care team helps patients navigate the often-challenging healthcare environment. We treat our patients like family and get them started on therapy quickly. We work closely with them as well as their family and their healthcare providers throughout the patient journey, staying focused on optimal clinical outcomes. At BioMatrix the heart of our Inclusion, Diversity, Equity, & Access (IDEA) philosophy is the commitment to cultivate a welcoming space where everyone’s contributions are acknowledged and celebrated. Our goal is to draw in, develop, engage, and retain talented, high-performing individuals from diverse backgrounds and viewpoints. We believe that both respecting and embracing diversity enriches the experiences and successes of our patients, employees, and partners. Schedule: Monday Through Friday From 8:30am Eastern Standard Time To 5pm Eastern Standard Time Work schedule is subject to change based on business needs. Location: Upon successful completion of on-site training, it is anticipated that an incumbent in this role will work in a hybrid capacity from one of the noted locations on Mondays, Wednesdays, & Fridays while working from home on Tuesdays & Thursdays. Work location is subject to change based on business needs. Job Description: Directly provides efficient management and collections of patient/customer accounts aligning with prevailing company, state, federal and payer standards. QUALIFICATION REQUIREMENTS • High school diploma or GED required, • Minimum of two (2) years of billing experience required, • Demonstrates strong computer literacy and aptitude as evidenced by proficiency and/or training with applicable software systems, • Knowledge of NYS Medicaid, Medicare Part B, and third-party payers, • Good written and verbal communication, • Prioritization skills, • Alignment to given instructions, • Associate’s degree in Health Care Service, Medical Sales, or a related field preferred, • Providing excellent customer service by:, • Being courteous and prompt in response to customer/staff inquiries, • Explaining financial responsibilities with customer and/or caregiver, • Providing accurate information to customer and/or caregiver and/or staff, • Documenting customer account issues/concerns (when applicable) and forwarding to the appropriate manager, • Improves departmental/company productivity and efficiency by:, • Making corrections and updating patient account files, • Accurately submitting claims to correct carriers on a regular schedule, • Reviewing and resubmitting aged claims well in advance of time limits, • Handling denials in manners most advantageous to quick resolution and payment, • Working aged claims as instructed, monitoring progress weekly, negotiating payer commitments, • Volunteering or initiating assistance in other activities (not listed in JD) when it is beneficial to the department/company, • Minimizing claims aged beyond 90 days, • Follows departmental/company policies and procedures by:, • Understanding and following Confidentiality Policy, • Serving as company resource on processing/reimbursement issues, • Maintaining a safe, clean and organized work area, • Understanding and following complaint procedures, • Monitoring that appropriate signatures & justification accompany service orders, • Following applicable Medicare, Medicaid regulations, • Following state and insurance carrier regulations, • Following regulations set forth in company contracts, • Shows teamwork, initiative and accountability by:, • Volunteering to assist co-workers, • Staying current with industry/coverage changes, • Ensuring completion of required in-services, testing and/or immunizations, • Complying with applicable memo’s and policy changes as issued, • Presenting solutions in conjunction with problems, • Exhibits exceptional work ethics by:, • Not being wasteful or abusing branch/region resources (vehicles, buildings, equipment, supplies, phones, utilities, time at work and time absent from work, etc.), • Presenting fair and honest reports of expenses (travel, gas, on call, etc.), • Following through timely with commitments, • Allowing others to speak without interruption, • Asking clarifying questions and showing consideration of others comments, • Using proper grammar, a respectful tone and language free of prejudice, harassment, profanity or ill will connotations, • Answering calls within three rings and properly introducing self in a pleasant and clear voice, • Returning phone messages promptly, responding calmly to angry or upset referrals/customers and avoiding personal calls (or minimizes) to allow customer access to business lines Communication Skills • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • This position requires constant sitting with occasional walking, standing, kneeling or stooping., • This position requires the use of hands to finger, handle or feel objects and the ability to reach with hands and arms., • This position requires constant talking and hearing., • Specific vision abilities required by this job include close vision and the ability to adjust focus., • This position must occasionally lift and/or move up to 20 pounds, • Required to move/lift physical hardware. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. If needing a reasonable accommodation within the application process, please contact the BioMatrix People & Culture team at or 954.385.7322 x 1425. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. OTHER • Will participate in legal and ethical compliance training each year., • Will consistently behave in compliance with the BioMatrix, LLC’s legal and ethical policies and procedures., • Will abide by the policies of BioMatrix, LLC as set forth in the Compliance Manual., • Will not participate in any conduct considered to be unethical or illegal. EXPECTATION FOR ALL EMPLOYEES Supports the organization's mission, vision, and values by exhibiting the following behaviors: integrity, dedication, compassion, enrichment and enthusiasm, places patients first, is all-in with stacked-hands, and is focused on relentless consistency wins. GENERAL INFORMATION: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required of personnel so classified. The incumbent must be able to work in a fast-paced environment with demonstrated ability to juggle and prioritize multiple, competing tasks and demands and to seek supervisory assistance as appropriate. Incumbents within this position may be required to assist or find appropriate assistance to make accommodations for disabled individuals in order to ensure access to the organization's services (may include: visitors, patients, employees, or others). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Senior Digital Hardware Engineer who will apply their skills and experience to lead the design of custom hardware and firmware for cutting-edge sensor and communication systems. Location: This position is located in the Syracuse, NY office with the potential for hybrid arrangements. Responsibilities: • Derive and document Digital Hardware system requirements working collaboratively with multiple technical disciplines, • Define custom multi-layer PCB architectures and perform part selection, schematic design, and aid in layout activities, • Perform functional test and verification activities for new hardware and aid in production transition and support, • Architect and design HDL solutions for the latest Xilinx FPGAs and SoC devices such as Ultrascale+ and RFSoCs, • Design and implement efficient solutions for data acquisition, digital signal processing, command and control, external hardware interfaces, and high-speed communication protocols, • Use scripting languages such as Python and Bash to automate and improve workflows, • Perform integration and test of hardware and HDL designs at subsystem and system levels, • Provide information in support of project planning, execution, and oversight What We’re Looking For: • A desire to own project assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs. Required Qualifications: • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field, • 5+ years related professional experience, • PCB design experience including the design of digital and analog circuits including FPGAs, microcontrollers, memories, and high-speed data converters, • Familiarity with VHDL and/or Verilog to configure FPGAs and other embedded systems, • Applied experience testing and validating analog and digital hardware using oscilloscopes, network analyzers, logic analyzers, spectrum analyzers, etc., • 10% travel. Preferred Qualifications: • Experience with Altium design environment, • Experience with modern Xilinx FPGAs and the Vivado design environment, • Experience with Communication and Sensor systems, Digital Signal Processing, Software Defined Radios, RF System Design, • Experience providing design oversight and detailed design review feedback, • Experience with Matlab, Python, Linux Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $109,000 to $136,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description CABVI is seeking a part-time JAWS Trainer to provide instruction and support to individuals with visual impairments on how to effectively use the JAWS (Job Access With Speech) screen reader software. This role involves teaching users how to navigate the computer interface, access information, and perform tasks using JAWS, enhancing their independence and enabling them to participate more fully in various aspects of life, including education, employment, and daily living. Responsibilities Include: • Conduct assessments with consumers to determine their individual technological needs and the appropriate course of training. Document instruction provided to consumer and the progress toward goals. Assess learner progress and provide feedback and support throughout the training process., • Design and deliver training programs that empower individuals who are blind to navigate digital environments independently and efficiently, using JAWS. Training programs could be delivered individually and/or in group settings., • Complete all documentation for reporting and billing in a timely manner as directed by your supervisor and in accordance with CABVI guidelines., • Remain current in technology, this would include both hardware and software. Willing to learn new assistive technology and applications for those with visual impairments., • Work with the Assistive Technology Manager to develop opportunities to share technology with other professionals in the form of workshops, conferences, staff training days, agency tours and more., • Continually research advances in the technology field, new products and applications. Attend trainings and meetings, as needed. Willing to advance your knowledge in computer skills through continuing education., • Adapt to change and completes other duties as assigned., • Minimum of an associate’s degree in teaching, vocational training, technology, or education required., • Formal training certificates in software or hardware applications may be substituted for advanced degrees., • Certifications in assistive tech or screen readers is a plus. A minimum of one year experience in a teaching or training capacity required. Teaching experience relevant to the instruction of legally blind and or individuals with disabilities or learning challenges preferred., • Must be knowledgeable regarding conventional hardware/software and installation on both PC and Macintosh systems. Familiarity with assistive technologies. Demonstrated competency with current computer and assistive technology as it relates to working with individuals who are blind or visually impaired, including JAWS, ZoomText, NVDA (Non-Visual Desktop Access), typing programs, Microsoft Office, Braille input and output devices, note takers, and adaptive keyboards. Fluency in Microsoft Office Suite, including Outlook, Word, Power Point, Excel. Must have knowledge in Google applications such as Docs and Sheets, mobile device applications including iOS and Android. Visit us at ! CABVI is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. Company DescriptionThe Central Association for the Blind and Visually Impaired (CABVI) is a not-for-profit agency with professional and support staff who provide comprehensive vision rehabilitation programs annually to more than 2000 people who are blind and visually impaired in a nine-county area. We teach independent living skills, as well as orientation and mobility, and we offer low vision services, children’s services, and continually-expanding technology and employment programs. One facet of our employment services is Central Industries, the Association’s manufacturing division that helps support agency services. Our mission is to assist people who are blind or visually impaired achieve their highest levels of independence.The Central Association for the Blind and Visually Impaired (CABVI) is a not-for-profit agency with professional and support staff who provide comprehensive vision rehabilitation programs annually to more than 2000 people who are blind and visually impaired in a nine-county area. We teach independent living skills, as well as orientation and mobility, and we offer low vision services, children’s services, and continually-expanding technology and employment programs. One facet of our employment services is Central Industries, the Association’s manufacturing division that helps support agency services. Our mission is to assist people who are blind or visually impaired achieve their highest levels of independence.

Job DescriptionSenior Strategic Account Executive – CABLExpress - Remote DISHER is partnering with an IT and hardware services company that is a leading provider of new and refurbished networking, telephony hardware, and data center cabling products, as well as full-service IT lifecycle solutions. As the largest secondary market network hardware provider in North America, they remain focused on delivering creative lifecycle management solutions for organizations of all sizes, worldwide. As a Senior Strategic Account Executive, you'll serve as a key player in identifying large-scale structured cabling opportunities, managing key client relationships and driving strategic, value-based solutions for high-performance data center environments. What it's like to work here: Headquartered in Syracuse, NY, this company has been serving their customers for over 40 years. They pride themselves on a culture of innovation, integrity, and customer focus. Their team is passionate about helping organizations extend the life of their technology while reducing costs and environmental impact. The base salary range for this role is $80,000 to $150,000, with on-target earnings (OTE) between $200,000 and $350,000, which includes base salary and incentive compensation. Incentive earnings are uncapped, offering significant upside potential.What you will get to do: • Develop, grow and maintain strategic relationships at all levels within assigned territory., • Actively cold call, prospect and develop pipeline for new business., • Readily identify customers who fit the data center profile., • Proactively & accurately forecast monthly, quarterly, yearly margin results for your territory to assist in achieving sales goals., • Upsell other core product sets to existing and new customers., • Maintain current knowledge of industry and marketplace., • Create and execute on territory management plan., • Participate as a collaborative member of a sales team and sales territory., • Provide customer feedback and industry information to management team., • Attend sales and product training as required., • Periodic travel may be required to visit key customer sites or industry events., • Assume additional responsibilities as required.What will make you successful:, • Bachelor’s degree in Business, Sales Management or related field., • 5+ years of structured cabling sales and strategic account management experience., • In lieu of degree, must have 9+ years of structured cabling sales and strategic account management experience., • Experience in Data Center or Enterprise environments with an understanding of fiber infrastructure., • Skilled in solution-based selling with ability to present technical solutions to business stakeholders., • Strong presentation, negotiation and persuasion skills., • Ability to work independently and collaboratively in a fast-paced, target-driven environment., • Comfortable engaging with technical and executive-level stakeholders.

Job Description For more than 45 years, CXtec has been helping organizations maximize value in their IT investments. We are the largest secondary market network hardware provider in North America. Today, we remain focused on providing creative lifecycle management solutions for organizations of all sizes, all over the world. We’re looking for a highly motivated, results-driven inside sales professional to join our dynamic team. As a Senior Strategic Account Executive, you'll play a key role in driving new business, expanding existing accounts, developing long-term relationships with key decision makers and delivering innovative and customer-focused IT hardware and services solutions. The ideal candidate will have 10+ years of B2B IT hardware and services sales experience with a proven track record of growing a customer base and increasing sales volume. Embedded in your professional DNA, you are a self-starter with a learning and competitive mindset. The base salary range for this role is $80,000 to $150,000, with on-target earnings (OTE) between $200,000 and $350,000, which includes base salary and incentive compensation. Incentive earnings are uncapped, offering significant upside potential. Final compensation will be determined based on a variety of factors including geographic location, skills, relevant education, experience, certifications, and overall alignment with business and organizational needs. .This position can be located in Syracuse, NY, Norcross, GA or Remote What you'll be doing: • Develop and maintain relationships with key customers., • Identify new business opportunities to both existing customers and new prospects., • Manage sales orders and provide status in the form of sales reports and forecasts to the manager and/or the management team., • Maintain and grow sales within existing territory of accounts and prospects by expanding the depth of products being sold., • Actively search for, find, develop and close new business., • Achieve and exceed monthly, quarterly and annual sales goals., • Accurately forecast monthly margin opportunity pipeline., • Participate as a collaborative member of a sales team and sales territory., • Actively and accurately utilize CRM system., • Attend sales and product training as required., • Create and execute territory management plan., • Bachelor’s degree in Business, Sales Management or related field preferred., • 10+ years of B2B IT network and data center hardware and associated services sales experience with a proven track record of growing customer base and sales volume., • Skilled in solution-based selling, with the ability to understand customer challenges and deliver tailored IT hardware and services solutions that meet business needs., • Excellent presentation, negotiation and persuasion skills., • Proven success prospecting, building a pipeline, moving opportunities through the sales cycle., • Ability to propose, present and discuss solutions with C-level and decision makers., • Self-disciplined and motivated to achieve sales goals., • Ability to organize and manage multiple priorities, while demonstrating strong attention to detail, appreciation of deadlines and commitment to follow-up is essential., • Exhibit strong teamwork and interpersonal skills., • Health insurance and prescription drug coverage, • Dental and Vision insurance, • Company-paid life insurance and voluntary life options, • Company paid short and long-term disability coverage, • Critical illness, accident and hospital indemnity insurance, • Flexible spending accounts, • Pet insurance, • Traditional and Roth 401(k) retirement plan with company match, • Tuition reimbursement and Employee Assistance Program We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, religion, sex, sexual orientation, protected veteran or military status, disability, marital or familial status, domestic violence victim status, gender identity or expression, criminal history, citizenship, immigration status or any other legally protected class.

Job Description For more than 45 years, CXtec has been helping organizations maximize value in their IT investments. We are the largest secondary market network hardware provider in North America. Today, we remain focused on providing creative lifecycle management solutions for organizations of all sizes, all over the world. We’re looking for a highly motivated, results-driven inside sales professional to join our dynamic team. The Senior Strategic Account Executive serves as a key player in identifying large-scale structured cabling opportunities, managing key client relationships and driving strategic, value-based solutions for high-performance data center environments. The ideal candidate will have 5+ years of selling data center structured cabling experience with a proven track record of growing a customer base and increasing sales volume. Embedded in your professional DNA, you are a self-starter with a learning and competitive mindset. The base salary range for this role is $80,000 to $150,000, with on-target earnings (OTE) between $200,000 and $350,000, which includes base salary and incentive compensation. Incentive earnings are uncapped, offering significant upside potential. Final compensation will be determined based on a variety of factors including geographic location, skills, relevant education, experience, certifications, and overall alignment with business and organizational needs. What you'll be doing: • Develop, grow and maintain strategic relationships at all levels within assigned territory., • Actively cold call, prospect and develop pipeline for new business., • Readily identify customers who fit the CABLExpress data center profile., • Proactively & accurately forecast monthly, quarterly, yearly margin results for your territory to assist in achieving sales goals., • Upsell other core product sets to existing and new customers., • Maintain current knowledge of industry and marketplace., • Create and execute on territory management plan., • Participate as a collaborative member of a sales team and sales territory., • Provide customer feedback and industry information to management team., • Attend sales and product training as required., • Periodic travel may be required to visit key customer sites or industry events., • Bachelor’s degree in Business, Sales Management or related field., • 5+ years of structured cabling sales and strategic account management experience., • In lieu of degree, must have 9+ years of structured cabling sales and strategic account management experience., • Experience in Data Center or Enterprise environments with an understanding of fiber infrastructure., • Skilled in solution-based selling with ability to present technical solutions to business stakeholders., • Strong presentation, negotiation and persuasion skills., • Ability to work independently and collaboratively in a fast-paced, target-driven environment., • Comfortable engaging with technical and executive-level stakeholders., • Excellent communication and interpersonal skills. What we offer: • Health insurance and prescription drug coverage, • Dental and Vision insurance, • Company-paid life insurance and voluntary life options, • Company paid short and long-term disability coverage, • Critical illness, accident and hospital indemnity insurance, • Flexible spending accounts, • Pet insurance, • Traditional and Roth 401(k) retirement plan with company match, • Tuition reimbursement and Employee Assistance Program, • Paid vacation, sick/personal days and holidays As a condition of employment, upon offer, candidates will be required to participate in a background check and complete a pre-employment drug screen. We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, religion, sex, sexual orientation, protected veteran or military status, disability, marital or familial status, domestic violence victim status, gender identity or expression, criminal history, citizenship, immigration status or any other legally protected class.

Job Description INTRODUCTION Company Overview: This position is available with Upstate HomeCare, a BioMatrix company. BioMatrix is a nationwide, independently-owned infusion pharmacy with decades of experience supporting patients on specialty medication. Our compassionate care team helps patients navigate the often-challenging healthcare environment. We treat our patients like family and get them started on therapy quickly. We work closely with them as well as their family and their healthcare providers throughout the patient journey, staying focused on optimal clinical outcomes. At BioMatrix the heart of our Inclusion, Diversity, Equity, & Access (IDEA) philosophy is the commitment to cultivate a welcoming space where everyone’s contributions are acknowledged and celebrated. Our goal is to draw in, develop, engage, and retain talented, high-performing individuals from diverse backgrounds and viewpoints. We believe that both respecting and embracing diversity enriches the experiences and successes of our patients, employees, and partners. Schedule: Monday Through Friday From 8:30am Eastern Standard Time To 5pm Eastern Standard Time Work schedule is subject to change based on business needs. Location: Upon successful completion of on-site training, it is anticipated that an incumbent in this role will work in a hybrid capacity from our location in Syracuse, NY on-site three (3) days per week while working from home two (2) days per week. Work location is subject to change based on business needs. Join our team, bring your best, and receive a $300 retention bonus as our way of saying thanks for being part of our success. Job Description: The Patient Referral Coordinator is responsible for the processing and coordination of all new referrals with the main objective being to clear all patients prior to service in order to ensure proper payment in compliance within all legal and regulatory parameters. This person will ensure accurate, efficient and timely processing of new referrals for Infusion and Enteral services to include, but not be limited to, obtaining all necessary supporting documentation, confirming insurance coverage, coding and pricing of products, documenting patient in applicable computer system, submitting for pre-authorization and coordinating of initial “pushing” of the referral. The Admissions Representative provides support and works collaboratively with referral sources, hospital liaisons, the pharmacy, nursing, and billing and branch personnel. QUALIFICATION REQUIREMENTS • Associate’s degree in Business, Health Care Services, or Medical Sales required, • Minimum of one (1) year of experience in healthcare industry required, • Strong working knowledge of first- and third-party payer requirements as it pertains to the billing and collection industry, • Excellent management, communication, interpersonal, team-orientation, organizational and analytical skills, • Prioritization and multi-tasking skills, • Proficiency with problem resolution, • Self-motivated and self-disciplined, • Computer aptitude, • Minimum of two (2) years of experience with a home care company preferred, • Provide knowledge and leadership regarding infusion intake processes by:, • Receiving new requests for services via phone, fax or other means, • Obtaining all information necessary to accurately process the referral according to established procedures, • Completing referral process within time frame required to meet the needs of the patient, family and referral source, • Accurately completing the patient record in applicable computer system to include all required demographics, insurance and clinical information; recording appropriate progress notes and alerts to present a clear concise picture of patient data, • Confirming insurance coverage for services requested; gathering detailed information regarding, but not limited to, eligibility, deductible, out of pocket, authorization requirements and patient obligations, • Communicating with referral source or liaison regarding, but not limited to, insurance coverage, information limitations and status of referral, • Obtaining insurance authorization when necessary; entering and documenting authorization according to established procedure; tracking authorizations due to expire and obtaining renewals as needed, • Assuring accurate and complete billing information is obtained and recorded to allow for timely claim submission and payment, thus reducing accounts receivable days outstanding, • Communicating any financial obligations to the patient or his/her designee; assuring their understanding and agreement to pay; establishing a payment method up-front, i.e. credit card, • Maintaining the pending referral log on a daily basis; attending rounds each morning prepared to discuss status of each patient, • Responding to requests for assistance from pharmacy billing and clinical personnel, • Remaining familiar with specific payer guidelines, requirements and contracts, • Staying current and implementing industry changes, • Consulting with the Admissions Director or Admissions Manager when faced with unfamiliar situations and when decisions outside of the Intake Representative’s scope need to be made, • Assisting with special projects and perform other duties at the discretion of the Admissions Director or Admissions Manager, • Maintaining monthly Referral Census Log, • Serving as a company resource with regards to Infusion processing and reimbursement, • Demonstrating a professional, cooperative and friendly attitude toward all internal and external customers and co-workers; demonstrating excellent customer service skills, • Using discretion in handling confidential matters, • Adhere to departmental/company policies and procedures by:, • Adhering to policies and procedures, • Adhering to regulations set forth by Medicare and Medicaid, • Adhering to regulations set forth by insurance carriers, • Adhering to regulations set forth in established company contracts, • Exhibits exceptional work ethics by:, • Not being wasteful or abusing branch/company resources (vehicles, building, equipment, supplies, phone, utilities time at work, time absent from work, etc.), • Presenting fair and honest reports of expense, • Following through timely on commitments, • Returning phone calls and e-mails promptly, • Being flexible and having the ability to prioritize, • Allowing others to speak without interruption, • Using proper grammar, a respectful tone and language free of prejudice, harassment, profanity or ill will connotations Communication Skills • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • This position requires constant sitting with occasional walking, standing, kneeling or stooping., • This position requires the use of hands to finger, handle or feel objects and the ability to reach with hands and arms., • This position requires constant talking and hearing., • Specific vision abilities required by this job include close vision and the ability to adjust focus., • This position must occasionally lift and/or move up to 20 pounds, • Required to move/lift physical hardware. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. If needing a reasonable accommodation within the application process, please contact the BioMatrix People & Culture team at or 954.385.7322 x 1425. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. OTHER • Will participate in legal and ethical compliance training each year., • Will consistently behave in compliance with the BioMatrix, LLC’s legal and ethical policies and procedures., • Will abide by the policies of BioMatrix, LLC as set forth in the Compliance Manual., • Will not participate in any conduct considered to be unethical or illegal. EXPECTATION FOR ALL EMPLOYEES Supports the organization's mission, vision, and values by exhibiting the following behaviors: integrity, dedication, compassion, enrichment and enthusiasm, places patients first, is all-in with stacked-hands, and is focused on relentless consistency wins. GENERAL INFORMATION: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required of personnel so classified. The incumbent must be able to work in a fast-paced environment with demonstrated ability to juggle and prioritize multiple, competing tasks and demands and to seek supervisory assistance as appropriate. Incumbents within this position may be required to assist or find appropriate assistance to make accommodations for disabled individuals in order to ensure access to the organization's services (may include: visitors, patients, employees, or others). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Infrastructure Engineer is responsible for the ongoing support, maintenance, and enhancement of both on-premises and cloud-based server hosting environments. This role involves designing, deploying, upgrading, and securing server infrastructure, including all associated hardware and software components. The engineer ensures the development of highly available, scalable, and secure infrastructure solutions, incorporating effective disaster recovery strategies. This position collaborates closely with IT Support, Business IT Analysts, Networking, and Cybersecurity teams to ensure seamless and uninterrupted operations. This is a hybrid position which requires employee presence 50-100% of the time. Duties & Responsibilities • Manage Windows updates, assist with Exchange Management console., • Manage IT Datacenter, Physical and Virtualized Servers, Virtualization Clustering, and SANs., • Design, develop, and deploy modular cloud-based systems., • Responsible/Accountable for server/application builds and qualifications for manufacturing and site cloud applications., • Manage Network Switches, Network Firewalls, IIS (Internet Information Services), Wireless Networks, and Gateways., • Maintain all system backups and participate in Disaster Recovery planning and execution., • Analyze, troubleshoot, and remediate server hardware/system related issues., • Support existing systems - proactively manage and maintain multiple systems to ensure performance and availability., • Work independently on assignments where considerable judgment and initiative are required in resolving problems and making choices, recommendations, or decisions., • Provide Level 3 support to users., • Provide off-hours support on a rotating basis as needed., • Collaborate with partners and customers to identify, scope, plan and execute digital modernization and asset life cycle management activities., • Ensure efficient functioning of data storage and process functions in accordance with company security policies and best practices in on-premise and cloud security., • Provides ownership and accountability for Asset Life Cycle Management within ServiceNow., • Owns Active Directory, Time synchronization with NTP, Network Domain and Domain Controllers in Windows environment., • Interact with clients, provide cloud support, and make recommendations based on client needs., • Performing/Assist in cloud infrastructure upgrades and updates to maximize system efficiency while minimizing downtime., • Work closely with IT Specialists, Engineering, Quality Assurance, and Validation teams in assessment, recommendation and implementation of computerized system applications that supports site Business and Manufacturing processes., • Bachelor's degree in Computer Science or Information Technology preferred; in lieu of a degree, a minimum of 3–5 years of high-level, hands-on IT experience is required., • Azure, AWS, or GCP certifications preferred., • Strong problem-solving skills, firm understanding of how to properly troubleshoot problems with as minimal client impact as possible, • Excellent project management, verbal communication, documentation, and technical writing skills, • Strong technical problem-solving abilities, written and verbal communication skills, • Demonstrated success of leading effectively in a complex matrix project team environment, • Team player with an emphasis on both knowledge sharing and learning, • Knowledge of Windows Operating System, Domains, and Group Policies, • Knowledge of Networking, Network Switches, Network Firewalls, IIS (Internet Information Services), Wireless Networks, and Gateways, • Experience and/or substantial understanding of industrial IT Datacenter, Physical and Virtualized Servers, Virtualization Clustering, and SANs, • Experience with Data accessing, storing and security within a cloud environment, • Skilled in Active Directory, Time synchronization with NTP, Network Domain, Domain Controllers, Networks, and Databases, • Ability to work in a diverse work environment, manage multiple priorities, and at times, be self-directed, • Familiar with cyber security best practices and industry-standard tools, • Experience with VPN, Routers, and Routing Protocols, • Perform in depth systems analysis on a multitude of technology devices, operating systems and software., • Ability to document, create, analyze and test computer systems, programs, software., • Exceptional understanding of advanced networking, including on-premise/cloud enterprise-grade infrastructure, as well as cloud-based network 'appliances' and interfaces, • Knowledge of integrating networking basics and virtual networks with cloud services, • Familiar with common languages (i.e. Python, Java, Golang, or Ruby) used in cloud computing, • In-depth, advanced understanding of the AWS/Azure ecosystem and technologies and how to apply them in reliable and efficient means are a strong plus, • Hands-on experience with Cisco appliances, ability to work within the CLI, are a strong plus Office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding is required. Work Environment This position is based indoors and the employee will primarily be working with others, but also independently. This position requires employee presence, on site 50-100%. This position is a team & project-based position that will require occasional shift work, weekends, and holidays. Travel <5% travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Automation Engineer is a key member of the Automation team supporting manufacturing Process Control Systems and Building Automation Systems at the Syracuse, NY manufacturing facility. The primary role of the Engineer is to lead design, implementation and maintenance efforts for systems that are controlled by Programmable Logic Controllers (PLCs) that support manufacturing and the site buildings. This role will require knowledge of both hardware, software and electrical components associated with the equipment the control system. Computer system validation work associated with commissioning and qualification of systems end to end from specification documents through IQ, OQ PQ is also required. The role will work directly with manufacturing process experts and facility engineers to determine end user requirements, develop robust strategies and solutions, draft specification documents, perform testing, commissioning and qualification activities and work safely and efficiently in a high compliance environment. Training will be provided as necessary to enable skills in specific applications used to support this role. Duties & Responsibilities • Primary responsibility is to lead end to end efforts for the design, build, test, and maintenance of the various Allen- Bradley PLC's and Rockwell applications associated with process control and building automation systems for the site., • Lead the design of vendor Rockwell PLC/ BAS roadmaps to align and integrate with site standards and strategies., • Lead the design and build of hardware Control, Remote IO and Power panels as well as end to end loop drawings for device control points., • Work with various PLC/BAS Vendors/ Integration specialists to ensure a safe and successful implementation effort is achieved., • Investigate the root cause of Automation PLC/BAS problems and propose solution to prevent recurrence., • Draft and maintain living and project documentation for managed systems including design specifications, qualification documents and knowledge base articles., • Conduct all job activities in accordance with cGMP and EHS requirements., • Provide training of automated solutions with Automation and Instrumentation staff to ensure understanding how the PLC/BAS functions to assist with troubleshooting during off hours., • Research and propose new PLC/BAS technologies to ensure cost reduction and increased reliability., • Advanced knowledge of engineering or sciences generally attained through studies resulting in a B.S. in, engineering, science, biochemistry or related discipline or its equivalent is highly desired., • Hardware & software design, implementation and troubleshooting experience 5+ yrs., • Knowledge of Rockwell Allen Bradley technologies, application and products required. (Studio5000, Factory Talk View SE, Thin Manager, Factory Talk AssetCentre, PlantPAx, • Experience in system and hardware refreshes from legacy to current technologies for PLC/BAS Systems, • Ability to develop and execute innovative PLC/BAS solutions for continuous improvement., • Quote/ Proposal review experience to ensure adequate design meets site budget commitments and project deliverables, • Experience working with PID drawings, electrical layout and wiring diagrams, Industry Design Standards and equipment loop drawings., • Technical problem solving and analysis skills as well as good communications skills (verbal and written)., • Ability to effectively lead or participate in multi-disciplined team environment to achieve goals., • Knowledge and understanding of applicable regulatory requirements. This position is a combination field and office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding are required. Work Environment This position is based indoors and you will primarily be working with others, but also independently and alone at times. This position is a team & project-based role. Travel <5% of travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description 1:1 Part-Time Support Staff Needed - Syracuse NY (BW - DR) A 33-year-old male in the Syracuse area is looking for a Direct Support Professional to assist his with, communication skills, independent living skills, being active in his community, and help him with choosing activities to her liking. He spends most of his time drawing and doing artwork. He works part-time at Bob's Ace Hardware. The ideal candidate is creative and engaging, active and patient, and willing to travel to different locations. The ideal candidate must also be willing to provide personal care when needed, and able to lift. The ideal candidate should be very active and willing to go to different locations in the community. This is a part-time position, but additional hours are available with other people receiving services. at the agency. Hours and days of work: Wednesday's from 3pm-6pm, up to 20 hours a week. Starting pay: $16.00/ hour Location: Syracuse, NY Qualifications: • Must be at least 18 years old., • Ability to work independently in the person's home and/or community., • Reliable with effective communication and organizational skills, • No experience required but experience working with people with disabilities preferred., • New York State Driver's license, reliable transportation, and proof of auto insurance is required; acceptable driving record required., • Must have technology available to download multiple apps for use in the community. Background check, fingerprinting and DMV record check will be conducted prior to hire by the non-profit agency. Job Posted by ApplicantPro

Make Your Career in Aerospace Manufacturing! Sign-on Bonus Up to $1,000. Are you ready to join a fast-paced, collaborative environment and build a rewarding career in manufacturing? Consolidated Precision Products (CPP) is a sand-casting foundry that specializes in complex aerospace and defense products. We are looking for talented individuals to join our team. We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! What do we have to offer you? • Starting at $27/hour (Or more with direct experience), • Paid training and overtime potential, • Full benefits package which includes Medical/dental/vision/life/disability insurance, • Quarterly bonus program and 401(k) with match, • Robust paid PTO & holiday pay, • Upward mobility and leadership that strives to help you succeed., • Sign-on bonus up to $1,000 to welcome you aboard! What will you do?, • Places film against viewing screen to conduct initial and final reading and interpreting by examining castings for flaws such as blows, cracks, excess sand, wires, gas porosity gas holes, core shifts, segregation, etc., • Ensures all developed film contains the proper number of X-ray shots, types of angles, part numbers and other requirements specified by the Company or customers., • Uses densitometer to ensure film coming out of the developer meets density specifications., • Ensures all film is properly developed by checking appropriate gauges, temperatures, etc., • As required, types up customer reports identifying X-ray reading results and interpretations., • Acquire additional certifications and credentials as required for work or career development, • Work on/participate in special projects as needed or assigned by management Qualifications:, • Education: High school diploma or equivalent required, • Experience: 1-2 years of directly related NDT experience Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires access or use of hardware and technology which is subject to the International Traffic in Arms Regulations (ITAR) and Export Administration (EAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. “green card holder”), Political Asylee (permanent), or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. E.O.E. This is a non-management position This is a full time position

Job Description Job Summary: We are looking for skilled Fence Installers to join our team as Journeyman Installers. As a Fence Installer, you will be responsible for chain-link fence installation, post setting, and maintaining a high standard of workmanship. Responsibilities: • Install chain-link fence fabric, set posts in concrete, and install top rails and hardware., • Assist in the layout and stringing of the fence line., • Operate power tools, hand tools, and small machinery safely and effectively., • Follow instructions from supervisors and adhere to safety guidelines., • Maintain a clean and organized work area. Qualifications: • 2+ years of experience in commercial or industrial fence installation., • Knowledge of proper techniques for setting posts, stretching fabric, and installing gates., • Ability to perform physically demanding tasks in various weather conditions., • Reliable transportation to project sites in the Syracuse area., • Previous OSHA training is a plus. If you are a skilled professional seeking a potential long-term opportunity in Syracuse, we invite you to apply by submitting your resume and a brief note of interest through our portal. We are an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of race, color, religion, sex, or national origin. Note: Only selected applicants will be contacted if the project is officially awarded. Application Instructions: If you meet the qualifications and are eager to contribute to our team, please submit your resume and cover letter to . We look forward to reviewing your application!

Job Description 2nd Shift General Laborer Hours: 12:00pm - 8:00pm or 10:00pm Pay: $14.00-$16.00 per hour depending on experience Staffworks is seeking a reliable 2nd Shift General Laborer to join their award-winning team! What's in it for you? • Temp to hire, • Weekly Pay, • Benefits once hired on 2nd Shift General Laborer Details * Set up and operate a variety of woodworking machines * Use various hand tools to fabricate high-grade millwork * Glue, fit and clamp parts and subassemblies together to form complete units * Drive nails or other fasteners into joints at designated places to reinforce joints * Sand and Scrape surfaces and joints of products to prepare for finishing * Apply, brush or spray assembled products or decorative materials * Install hardware such as hinges, catches and drawer pulls 2nd Shift General Laborer Qualifications * Millwork experience preferred * High School Diploma or equivalent * Computer skills * Proper personal protective equipment is required to be worn when in the warehouse and factory * Ability to lift over 50lbs * Ability to work overtime, including weekends when needed We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. How to Apply: (315)455-9675

Job Description ABOUT THE COMPANY: Groundwork Operations, LLC provides general and specialized Crew to set-up and break-down indoor and outdoor events in multiple regions. Our team works projects of all sizes, from small events that a single Crew Member can set up on their own, to large scale events such as the NY Marathon where we have dozens of shifts available on a daily basis for several weeks. JOB DESCRIPTION: This job is gig-based. You are applying for the opportunity to be included in our database of Crew Members who are offered individual shifts based on the varying, seasonal needs of the Clients we serve. Many events will require you to work overnights + weekends. Whether you are interested in pursuing a career in Event Production, or are simply seeking a flexible work schedule or supplemental income, this job can be a great fit. In addition to seasoned Event Production professionals, our current crew roster includes artists, content creators, graphic designers, students, and entrepreneurs with a wide range of life experiences and personal pursuits. Some Crew Members work a single shift a year, while others work 40+ hour weeks during our busy season. Motivated crew members will have more consistent work opportunities, access to additional training, increased responsibilities, and pay raises. RESPONSIBILITIES: Can include, but are not limited to: • Set-up / installation + break-down / dismantle of truss, pipe + drape, signage + hardware structures, tents, tables, chairs + barricades, • Coiling + laying cable, • Loading + unloading trucks, • Distribution + collection of materials, • Packaging + palletizing HARD SKILLS: • Ability to lift 100 pounds, • Ability to reach, kneel + bend, • Ability to personally manage a gig-based work schedule without missing shifts, • Ability to give praise, receive constructive criticism + work toward ongoing self-improvement, • Ability to communicate + collaborate with clients + co-workers, • Ability to maintain a positive attitude in stressful situations, • Ability to follow directions + execute tasks with attention to detail, • Valid State ID, • Working email address, • Consistent working smartphone w / a data plan capable of downloading + operating mobile apps, • Ability to fill out online employment paperwork with e-signature functionality, • Operating specialized moving equipment (pallet jacks, hand trucks, dollies, etc. . .), • Operating fork, scissor, or boom lifts, • Driving cargo and / or passenger vans, • Driving 16’ - 26’ box trucks, • Professional moving experience, • Warehouse, packing, shipping and receiving, • Stagehand, AV, concert, and theater work Powered by JazzHR WfaFH1OkJG

Job Description Overview Tradesmen International is immediately hiring skilled Journeyman Carpenters for multiple projects located in and around Syracuse, NY. This is a first shift opportunity with a pay range of up to $30/hour based on experience & skill level. If you are a Carpenter and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • Start-to-finish carpentry for commercial and residential projects, • Metal and wood stud framing, • Rough builds, trim work, molding, and finish carpentry, • Installing cabinets, doors, windows, • Drywall installation and remodeling, • Removing drywall, siding, windows, • Remove good hardware for repurposing, • Install new windows, level and flush to surface, • Basic tools of the trade, • Standard PPE, • Reliable means of transportation, • OSHA 10 Certification; TI does offer course to qualified Employees who have yet to obtain the certification Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Tradesmen International is immediately hiring skilled Journeyman Carpenters for multiple projects located in and around Syracuse, NY. This is a first shift opportunity with a pay range of up to $30/hour based on experience & skill level. If you are a Carpenter and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • Start-to-finish carpentry for commercial and residential projects, • Metal and wood stud framing, • Rough builds, trim work, molding, and finish carpentry, • Installing cabinets, doors, windows, • Drywall installation and remodeling, • Removing drywall, siding, windows, • Remove good hardware for repurposing, • Install new windows, level and flush to surface, • Basic tools of the trade, • Standard PPE, • Reliable means of transportation, • OSHA 10 Certification; TI does offer course to qualified Employees who have yet to obtain the certification

Job Description Job Description: BioMatrix Specialty Infusion Pharmacy is dedicated to delivering compassionate, high-quality care through timely and reliable medication delivery. As an Enteral Customer Service Representative is responsible for the processing and coordination of all new referrals with the main objective being to clear all patients prior to service in order to ensure proper payment in compliance within all legal and regulatory parameters. Enteral Customer Service Representative, you will be responsible for maintaining patient relationships and processing new referrals. It is expected that you will handle each in a professional, enthusiastic manner. You will obtain all necessary demographic, clinical, financial, physician and family information. You will provide the highest level of service to all customers and assure them that each is provided with complete and accurate information regarding insurance coverage, their financial responsibilities, and delivery expectations. Schedule: Monday to Friday, 8 am-5 pm EST Location: Syracuse, NY This position requires you communicate effectively with business development staff to grow and maintain relationships with referral sources. As well as enhance communication with team members to solidify a cohesive and productive work environment. QUALIFICATION REQUIREMENTS • 1-2 years of customer service experience, • Proficient computer skills, • Highly organized with the ability to pay attention to detail., • Critical thinker, • Solution orientated with the ability to problem solve., • Ability to actively listen., • Excellent communication skills both written and verbally., • Excellent prioritizing and time management skills, • Strong interpersonal skills, • Comfortable to work in high volume and fast-paced environment., • Displays willingness to multi-task and make quick decisions., • Self-directed, but able to work in a team environment., • Math aptitude QUALIFICATIONS PREFERRED • Related health care experience with a focus on enteral/respiratory therapy; insurance reimbursement, • Understanding/knowledge of enteral/respiratory therapy; HCPC codes; insurance guidelines, • Knowledge of third-party requirements desirable ESSENTIAL FUNCTIONS AND RESPONSIBILITIES • Receive, review, and process new patient referrals for enteral therapy services., • Obtain complete and accurate patient demographic, clinical, and insurance information., • Verify insurance benefits, coverage, and financial responsibilities for new and existing patients., • Communicate with patients, families, and caregivers to provide clear explanations of services, billing, and delivery timelines., • Coordinate with clinical, pharmacy, and delivery teams to ensure timely order fulfillment., • Maintain compliance with HIPAA and all regulatory requirements in documentation and communication., • Serve as the primary point of contact for patient inquiries, ensuring prompt and courteous resolution., • Collaborate with Business Development staff to strengthen referral relationships and ensure continuity of care., • Follow up with referral sources and internal departments to ensure documentation accuracy and completeness., • Update patient records, authorizations, and order changes in the system promptly., • Support ongoing quality assurance initiatives and contribute to process improvement efforts. OTHER FUNCTIONS & RESPONSIBILITIES • Participation in membership in professional societies and organizations., • Ability to prioritize and handle multiple tasks and projects concurrently., • Must have scheduling flexibility and be able to work overtime and on-call coverage., • Overnight travel on occasion by car, airplane and train., • Careful attention to detail., • Performs related duties as requested., • Strong working knowledge of medical terminology, particularly related to enteral therapy and nutrition services, • Understanding of insurance processes, including verification, authorizations, and billing procedures, • Ability to maintain patient confidentiality in compliance with HIPAA and company policy, • Exceptional customer service and interpersonal communication skills, • Ability to multitask effectively and manage competing priorities in a dynamic environment, • Strong problem-solving, decision-making, and conflict-resolution skills, • High level of accuracy and attention to detail in data entry and documentation, • Excellent written and verbal communication skills, with professional phone etiquette, • Proficiency in Microsoft Office Suite (Word, Excel, Outlook) and ability to learn internal software systems, • Ability to work independently while contributing to a collaborative team environment, • Demonstrates empathy, patience, and professionalism when interacting with patients and healthcare professionals PHYSICAL DEMANDS AND WORK ENVIRONMENT • This position requires frequent standing and occasional sitting with occasional walking, kneeling or stooping., • This position requires the use of hands to fingers, handle or feel objects and the ability to reach with hands and arms., • This position requires constant talking and listening, • Specific vision abilities required by this job include close vision and the ability to adjust focus., • This position must occasionally lift and/or move up to 25 pounds, • Required to move/lift physical hardware. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. If needing a reasonable accommodation within the application process, please contact the BioMatrix People & Culture team at or 954.385.7322 x 1425. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. OTHER • Will participate in legal and ethical compliance training each year., • Will consistently behave in compliance with the BioMatrix legal and ethical policies and procedures., • Will abide by the policies of BioMatrix as set forth in the Compliance Manual., • Will not participate in any conduct considered to be unethical or illegal. EXPECTATION FOR ALL EMPLOYEES Supports the organization's mission, vision, and values by exhibiting the following behaviors: integrity, dedication, compassion, enrichment and enthusiasm, places patients first, is all-in with stacked-hands, and is focused on relentless consistency wins. GENERAL INFORMATION: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required of personnel so classified. The incumbent must be able to work in a fast-paced environment with demonstrated ability to juggle and prioritize multiple, competing tasks and demands and to seek supervisory assistance as appropriate. Incumbents within this position may be required to assist or find appropriate assistance to make accommodations for disabled individuals in order to ensure access to the organization's services (may include: visitors, patients, employees, or others). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

With over 45 years of experience in the industry, CXtec supports enterprises throughout the world in rethinking how they build, support, decommission, and upgrade their IT infrastructure hardware to redefine their IT strategy towards a sustainable course.We are looking for an eBay Lister.As an eBay

Fits and installs window frames, doors, door frames, door hardware, interior and exterior trim using a carpenter's level, plumb bob, and laser levels. Carpenter Job Duties: Installs foundat

Perks include competitive pay, flexible scheduling, training opportunities, a supportive work environment, and career growth potential. We’re looking for a Amazon IT Support Technician to diagnose and resolve hardware, software, and network issues for employees.

Pay attention to customers’ descriptions of their computer problems Ask customers questions to properly diagnose the problem Walk customers through the recommended problem-solving steps Set up or repair computer equipment and related devices Train users to work with new computer hardware or softwa

Purchasing Agent Pay Rate: $28–$30 per hour (based on experience) Schedule: Full-time, Monday through Friday Syracuse, NY About the Role Our client is a rapidly growing leader in custom emergency vehicle builds and fleet upfitting, providing end-to-end solutions that include vehicle design, fabrication, installation, and service. As the Purchasing Agent, you’ll play a key role in ensuring production efficiency by sourcing, ordering, and maintaining the parts and components needed for vehicle upfitting operations. This position is ideal for a detail-oriented, hands-on professional who enjoys working in a fast-moving environment, thrives on variety, and takes pride in supporting high-quality manufacturing and service operations. Key Responsibilities • Source and purchase vehicle parts, electrical components, lighting, hardware, and upfitting materials from approved and new vendors., • Manage purchase orders — verifying pricing, quantities, part numbers, and delivery timelines., • Maintain accurate inventory records and anticipate material needs based on production schedules and service priorities., • Partner with parts and service teams to ensure timely delivery of critical components and communicate any supply chain delays or issues., • Build and maintain vendor relationships to secure competitive pricing, quality assurance, and reliable delivery., • Identify opportunities to reduce costs through vendor consolidation and bulk ordering strategies., • Work closely with accounting to reconcile invoices, resolve discrepancies, and maintain organized purchasing documentation., • Support ongoing process improvement efforts, including evaluating supplier performance and identifying ways to streamline the purchasing workflow. Qualifications • 2–5+ years of purchasing, procurement, or inventory coordination experience — preferably in automotive, manufacturing, or fleet operations., • Strong communication and relationship management skills; enjoys working cross-functionally with accounting, service, and production teams., • Exceptional attention to detail, accuracy in data entry, and ability to manage multiple priorities in a fast-paced environment., • Experience working with purchasing or ERP systems (training will be provided)., • Associate’s or Bachelor’s degree in Business, Supply Chain Management, or related field preferred (or equivalent hands-on experience)., • Valid driver’s license required. Work Environment • Office-based role with frequent interaction with the shop floor and warehouse teams., • Collaborative, team-oriented setting focused on continuous improvement and operational efficiency., • Training and onboarding provided directly by leadership to ensure success in company systems and processes., • Opportunity to grow with an organization that’s actively professionalizing and expanding its operations. Why Join This is an exciting opportunity to join a company that is restructuring and growing — defining clear roles, improving processes, and investing in its people. The Purchasing Agent will have the chance to make an immediate impact on sourcing strategy, vendor management, and purchasing efficiency while being part of a tight-knit, family-oriented team that values initiative and collaboration. Submit a resume to today for immediate consideration! Sapphire Recruitment is an EOE

UX Designer Job Duties: Creates innovative solutions for a wide variety of product design challenges, including mobile, desktop, hardware interfaces, physical environments, and person-to-per

Computer/IT Job Duties: Setting up hardware and installing and configure software and drivers. Monitoring and maintaining computer systems and networks.

Proficiency in hardware design tools such as Altium Designer, OrCAD, PSIM, or PLECS. The Design Engineer - Electrical Hardware will take a lead role in the design and development of innovative, energy-efficient electrical hardware solutions. Perform FMEA, risk analysis, and drive design improvements

The Senior Channel Manager Showroom will lead the strategic development and growth of the Signature Hardware brand within the Ferguson Showroom Channel!. This role will work closely with the President of the brand, the VP of Sales & Strategy, along with cross-functional collaboration across many te

The Help Desk Analyst II will provide first point of contact technical support through analysis and problem solving for the installation, maintenance, implementation and documentation of the current Restaurant Systems software and hardware technologies via phone or remote support communication. IT s

Job Description Join our team of technical professionals as a 2-Way Radio and Technical Systems. Build a career installing and servicing critical communications and technical support systems for industry, emergency services, health care, and education. Earn professional certifications while providing exceptional workmanship of the highest quality in the installation and maintenance of sophisticated electronic equipment and systems. We sell, service, design and install radio repeater systems, fire station alerting systems, public address equipment, distributed antenna systems, cell phone booster systems, security camera systems, access control systems, uninterruptible power supplies, servers, switches, PTP Links and more. Systems include all types of mounting hardware, cables, antennas, operator interface computers, devices and power. Summary As a Field Service Technician, you will build, install, troubleshoot, service, and maintain Land Mobile Radio(LMR) analog, DMR, P25, and trunked digital RF systems. You, along with the field service team, will be directly responsible for keeping our communities' public safety, education, and public works departments communicating. Essential Duties and Responsibilities The job tasks encompass technical responsibilities, including the deployment, optimization, and repair of infrastructure, public safety loggers, subscribers, microwave equipment, computers, servers, and network equipment. Our Technicians collaborates closely with Public Safety Customers, System Managers, Engineers, Sales Teams, and Project Managers . Additionally, the department operates on a 24/7/365 basis to provide support for mission-critical systems that serve our Public Safety Customers. • Maintain, optimize, test, document and manage highly technical Motorola and other communications systems., • Focus on maintaining optimal performance levels across an integrated system while taking a proactive approach to address and mitigate system level alarms and malfunctions., • Manage system availability through routine system maintenance, performance monitoring and system wide preventative maintenance., • Perform preventative maintenance routines to ensure proper system operation with focus on trend analysis and the documentation of results., • Optimize and support complex communication systems and software applications, including advanced troubleshooting of software driven electronics, provisioning of communication system infrastructure and performance optimization of RF and Broadband systems., • Deliver knowledge of R.F. systems, such as transmitters, receivers, and antenna networks., • Deliver knowledge in standard telephony, dedicated data circuits, and packet switching techniques., • Provide weekly reports of activities and accomplishments., • Develop solutions to difficult technical problems encountered as part of system maintenance, upgrades or support issues., • Candidates must be familiar with the latest technologies and troubleshooting techniques for current model digital and analog Motorola communications equipment and system architectures., • Experience as a Communications System Technician with expertise in P25 Systems, LMR RF systems, wired/wireless communication systems, networking equipment, IT networks, and subscriber equipment., • Highly knowledgeable in wired/wireless communications systems, including local area networks (LAN) and wide area networks (WAN)., • Proficient in MS Word, Excel, Outlook, and Access, demonstrating strong computer literacy., • Possesses exceptional self-management and interpersonal skills to effectively collaborate with customers, subcontractor partners, and various teams within Motorola Solutions., • Self-motivated and capable of performing duties independently without direct supervision., • Skilled in quickly resolving customer problems even in stressful situations., • Familiarity with configuring and testing base stations, repeaters, routers, switches, and MPLS networks., • Proficient in installing, configuring, and maintaining computer networks, including cabling, routers, switches, firewalls, and bridges., • Proven experience utilizing equipment commonly used for optimizing and testing Motorola communications systems, such as Communications Systems Analyzers, Power Sensors and Watt Meters, TIMS sets, CPS, CSS, Antenna Systems Analyzers (FDRs)., • Skilled in configuring and testing Motorola and other two-way radio and subscriber products., • Must be willing to travel and live within 50 miles from the coverage area., • Must be able to obtain background clearance as required by government customer(s)., • Must have a current, valid driver’s license and no traffic violations., • Ability to be on-call 24/7/365, • Certifications such as ETA are a plus., • CET certifications through CompTIA Network+ and/or Security+ are highly desirable. Standard Hours are M-F 8:00am-5:00pm some weekends and nights might be required as part of an on-call schedule. Pay within this range varies and depends on job-related knowledge, skills, and experience. The actual offer will be based on the individual candidate. Sign-on bonus is available based upon certifications and skill sets. Basic Requirements • Incentive Bonus Plans, • Medical, Dental, Vision benefits (with contribution), • 401K (with contribution), • 8 Paid Holidays, • Generous Paid Time Off Packages

Job DescriptionMake Your Mark™ with Tandy Leather! Do you want to be part of a team that allows you to be you and share your passion and creativity as part of a talented and diverse retail team? Our retail stores are the center of our business, and our associates are the front line with our customers. As part of the Tandy team, our store associates look forward to a consistent schedule with no early mornings or late nights, paid holidays and PTO, a generous employee discount, a quarterly sales associate bonus, and more! Plus, they get the chance to learn and develop their leatherworking knowledge and skills as part of a small team running a small business. You will join a heritage brand with more than 100 years of expertise in leathercraft. Sound like a team you'd like to be a part of? Since 1919 Tandy Leather has been the resource for generations of leatherworkers, providing quality leather, tools, kits, and teaching resources worldwide. As a century-old brand, Tandy has a deep respect for tradition, but we also embrace change, new trends, and new ways to create. From store to distribution center to corporate, Team Tandy works collaboratively every day to ensure our customer's experience is always consistent no matter how they choose to shop at Tandy. Responsibilities: • Welcome and identify customer needs, • Explain products and services to customers, • Monitor inventory to ensure the product is in stock, • Enter and process customer orders, • Investigate and resolve customer complaints, • Other duties as assigned Qualifications: • Previous experience in sales, customer service, or other related fields, • Ability to thrive in a fast-paced environment, • Ability to build rapport with customers, • Excellent written and verbal communication skills, • Strong negotiation skills Physical Demands: • Constant moving & standing for at least two consecutive hours, • Lifting up to 30 lbs., • Stooping, kneeling, and crouching, • Climbing ladders, • Reaching for items above eye level, • Involves close vision and color vision, depth perception, and focus adjustment TLF offers a compensation package: • Competitive compensation – strong pay for performance culture., • Sales Associate Quarterly Bonus – based on sales performance, a great way to grow your pay!, • Paid Holidays – ten paid holidays available on day one of employment., • Paid Time Off – granted after 60 days of employment., • 401(k) Plan - company matched, • And much, much more! We consider all qualified applicants for employment, including those with Criminal Histories. EQUAL EMPLOYMENT OPPORTUNITY At Tandy, our diversity is our strength, and we are committed to creating a safe and inclusive workplace for all employees regardless of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Tandy is proud to be an equal-opportunity employer. ABOUT TANDY Tandy Leather Factory, Inc., (), headquartered in Fort Worth, Texas, and in business since 1919, is a specialty retailer of a broad product line including leather, leatherworking tools, buckles and adornments, leather dyes and finishes, saddle and tack hardware, and do-it-yourself kits. Tandy Leather distributes its products through its 100+ North American stores located in 40 US states, 6 Canadian provinces, and Spain.

Job Description Data Center & Route Switch Field Service Technician This is a full time benefits eligible position that includes a company vehicle, gas card for vehicle, inventory, and training. Paid training includes two certifications CCT Data Center and CCT Route/Switch, which comes with a dollar per hour increase. If you are technical, Acuative is willing to invest in you for this role. This position requires a person willing to go to new places. Tickets can be assigned for up to four hours away to provide installation and maintenance services to voice and data networks, servers, computer systems, retail technology systems, and other network-based hardware. Acuative technicians are guaranteed forty (40) hours of pay per week even if not dispatched for forty hours. To be eligible for this role you must have a clear driver’s license (no more than 4 points), have the Covid-19 vaccination, and willing to work mostly M-F with opportunity for overtime and call out pay after hours. This position often works alone, and qualified applicants must be able to lift up to fifty pounds above head and climb a ladder. Selected candidates are given a full week of paid training and support as needed for every job they are routed to. Acuative is a drug free workplace. Overview: Acuative, the nation's leading independent provider of telecommunications field services, seeks a Field Service Technician. The successful candidate will spend the majority of their time covering the (MARKET) area providing installation and maintenance services to voice and data networks, servers, computer systems, retail technology systems, and other network based hardware. Primary Duties and Responsibilities The position involves a variety of tasks including but not limited to: · Installation and maintenance of networking hardware including routers, switches, and WAP’s · Installation and maintenance of telephony equipment and circuits · Hardware break/fix support for Cisco UCS servers and Nexus switching equipment · Installation and support of retail technology systems – POS, Digital Signage, and Video Surveillance Systems · Circuit extensions and structured cabling · Site surveys and site audits · Maintain company vehicle, inventory, and tools to departmental standards · Accurately and timely submission of all job-related documents and deliverables Preferred Qualifications Candidates should possess many of the following KSAs: · Working knowledge of networking hardware and topologies · Familiarity with Cisco networking products and interfacing through Cisco CLI · Understanding of telephony systems (VOIP, PBX, Key Systems) with an ability to provide hands-on hardware and troubleshooting support · Knowledge of computing systems hardware with the ability to provide break/fix support for desktop PC and/or servers · Physical installations of a wide variety of hardware including routers, switches, WAPs, servers, POS systems, digital signage systems, and associated peripheral equipment · Ability to provide configuration support for a variety of technology platforms through console and remote applications · Experience with LEC circuit identification and extensions · Familiarity with cabling standards and the ability to pull and terminate cabling in a variety of customer environments · Ability to operate basic power tools – drills, saws, etc. · Work on ladders and lifts where required · Working knowledge of Microsoft Office applications (Excel & Word). · Ability to follow detailed job documents · Must be willing to travel within assigned region to meet customer SLAs · On-call, after hours, and weekend work may be required · Must possess a valid drivers’ license with good driving record Education & Certifications: · Associates degree in Information Technology or equivalent experience · CompTIA, Cisco, Cabling, and PBX system certifications a plus! · Selected candidates will be required to attend a one week hardware training course at our Global Technology Center in Strongsville, OH · Selected candidates must obtain Cisco CCT Route/Switch and CCT Data Center certifications within 90 days of employment at Acuative

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Digital Hardware Engineer who will apply their skills and experience to lead the design of custom hardware and firmware for cutting-edge sensor and communication systems. Location: This position is located in the Syracuse, NY office with the potential for hybrid arrangements. Responsibilities: • Design and implement custom multi-layer circuit cards by performing part selection, schematic design, and aiding in layout activities, • Maintain component libraries and create new parts for schematic capture, • Perform functional test and verification activities for new hardware and aid in production transition and support, • Design HDL solutions for the latest Xilinx FPGAs and SoC devices, • Perform timing closure and create well constrained, maintainable solutions that are easily extensible and employ an efficient use of resources, • Use scripting languages such as Python and Bash to automate and improve workflows What We’re Looking For: • A desire to own project assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs. Required Qualifications: • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field, • 3-5 years related professional experience, • Understanding of digital and analog circuits, • Experience with VHDL and/or Verilog to configure FPGAs and other embedded systems, • 10% travel Preferred Qualifications: • Experience testing and validating analog and digital hardware using oscilloscopes, network analyzers, logic analyzers, spectrum analyzers, etc., • Experience with modern Xilinx FPGAs and the Vivado design environment, • Experience with Communication and Sensor systems, Digital Signal Processing, Software Defined Radios, and RF System Design, • Experience with Matlab, Python, Linux Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $89,000 to $110,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job DescriptionWe are seeking an experienced and professional Assistant Manager to join our team at Manlius Ace Home Center. As an Assistant Manager, you will be responsible for ensuring the store runs efficiently and is adequately staffed. You will assist with managing employees and fostering a positive work environment. Other responsibilities include store opening and closing procedures, cash handling and inventory management. Ensuring customer satisfaction with a problem-solving attitude is expected. The ideal candidate will have experience working in a hardware store environment, have a working knowledge of plumbing and electrical, managing employees and mixing paint. Working hours are generally 11:30am to 8:00pm four weekdays per week and 9:00am to 5:00pm on Sunday.

Job Description Job description We are seeking an experienced Low Voltage Cable Technician with expertise in managed Wi-Fi, Fiber to the Unit (FTTU), and in-building network installations and Supervising a Team. The ideal candidate will have a strong background in deploying and maintaining structured cabling and network infrastructure in multi-unit buildings, commercial spaces, and mixed-use properties. This role requires a deep understanding of low-voltage systems and the ability to deliver high-quality, reliable connectivity solutions. Key Responsibilities: Installation and Configuration: • Install and terminate low-voltage cabling, including fiber optics, Cat5e/Cat6, and coaxial cables, for managed Wi-Fi and in-building networks., • Deploy and configure equipment such as access points, switches, routers, ONTs, and patch panels., • Establish fiber optic links, including splicing, testing, and troubleshooting., • Test and certify installed cabling to meet performance standards using appropriate tools (e.g., OTDRs, cable certifiers)., • Troubleshoot issues in managed Wi-Fi systems, fiber networks, and Ethernet connections., • Collaborate with project managers, engineers, and property stakeholders to plan and execute network installations., • Interpret blueprints, schematics, and floor plans to determine optimal installation routes and strategies., • Perform routine maintenance and upgrades to in-building networks to ensure optimal performance., • Proven experience in low-voltage cable installation, including fiber optics and Ethernet cabling., • Hands-on experience with managed Wi-Fi solutions (e.g., enterprise-grade access points, controllers)., • Proficiency in Fiber to the Unit (FTTU) installation and maintenance., • Knowledge of networking hardware and protocols, including VLANs, PoE, and IP networking., • BICSI Installer/Technician, RCDD, or other relevant certifications., • Fiber optic certifications (e.g., FOA, Corning, or Fluke)., • Ability to lift up to 50 pounds, climb ladders, and work in confined spaces., • Experience using testing tools such as OTDRs, power meters, and cable certifiers., • Excellent problem-solving and troubleshooting skills., • Strong organizational and time management abilities., • Effective communication and collaboration with teams and clients. Work Environment: This role involves working in residential and commercial properties, including multi-unit buildings, data centers, and construction sites. Travel to various project sites may be required. Why Join Us? At Luck Grove, we provide an opportunity to work on cutting-edge network infrastructure projects. We offer competitive compensation, professional development, and a supportive work environment. If you have a passion for connectivity and technology, we encourage you to apply! Equal Opportunity Employer: Grove is dedicated to fostering a diverse and inclusive workplace. We welcome applications from individuals of all backgrounds and experiences. Job Type: Full-time Benefits: • 401(k), • Medical, Dental and Vision insurance, • Life insurance and Disability insurance, • Paid Time off, • Paid Holidays

Job Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey In-Building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking an enthusiastic entry – mid level Construction Manager to join our high performing team of technology professionals in Syracuse, NY. This position encompasses leading installation projects from beginning to end, along with supporting the customer requests for new builds, repairs, and routine maintenance. Primary Responsibilities: • Exercises independent judgment and discretion in overall project management by prioritizing, planning, and tracking project progress while staying within the budget., • Daily field deployment to oversee construction., • Field installation, Coax cable testing/repair, fiber testing/repair, surveys, and coming up with various innovative construction solutions., • Stakeholder updates using the MS Office Suite, • Consults with management to identify customer needs and coordinate project objectives., • Manages the resources performing the construction work including direct reporting staff, matrix staff, and vendor and subcontractor resources, • Create/Update SOP’s (Standard Operating Procedures)., • A valid driver’s license is required, • A high school diploma with 2-5 year of relevant installation/construction experience, a degree in Construction Management, or a combination of education and experience (compensation for this position will be scaled based on the experience and skill level.), • Excellent written and verbal communication skills., • Proficiency with MS Word, Outlook, and Excel., • Must be able to lift objects of up to 50 pounds, • Experience with hand/power tools, and knowledge of various hardware mounting solutions (drilling into concrete, drywall, wood and mounting equipment to various structures), • Commitment to conducting daily fieldwork, entailing around 80% travel, which includes occasional night shifts and out-of-state assignments., • Attention to detail including quality, safety, code, and adhering to customer standards., • This is a full-time position, salaried position with hours of work being: Monday through Friday, 8:30 a.m. to 5:30 p.m., • Ability to work beyond normal work hours to get the job done., • Telecommunication related experience is a plus (but not required), • Electrical/Conduit experience is a plus (but not required), • Strong leadership skills & ability to drive projects to timely completion., • Ability to meet deadlines and work additional hours as needed., • Initiative-taking and able to work effectively with minimal supervision., • Proficiency in written and oral communication; fluency in English., • Ability to multitask in a dynamic environment., • Capacity to work in a fast-paced, high-energy team setting., • Strong problem-solving skills and analytical abilities.

Job Description We are looking for a skilled Desktop Support Analyst to join our team in Syracuse, New York. In this role, you will provide exceptional technical assistance to ensure seamless operation across desktop, server, and network systems. You will play a key part in maintaining and enhancing our IT infrastructure while delivering top-notch service to users. Responsibilities: • Administer and maintain desktop systems to ensure optimal performance and reliability., • Oversee server and network operations, troubleshooting issues and implementing necessary solutions., • Manage and resolve support requests through a ticketing system, ensuring timely communication with users., • Utilize desktop imaging tools to deploy and maintain workstations efficiently., • Ensure proper functionality of desktop hardware and software, including Windows 10 systems., • Collaborate with team members to identify and implement improvements to IT services., • Offer guidance and training to users on Office 365 products and other applications., • Maintain documentation of systems, processes, and solutions for future reference., • Minimum of 2 years of experience in desktop, server, and network administration., • Strong knowledge of desktop hardware, imaging, and Windows 10 operating systems., • Solid understanding of server and network administration practices., • Effective communication skills to interact with users and team members., • Ability to work independently and collaboratively in a fast-paced environment.

Job DescriptionAre you ready to join a growing team that puts a premium on productivity and has an award-winning culture centered around transforming talented employees into effective business leaders? Then BHG Financial is the place for you. In 2001, we started with an idea, an opportunity, and $25,000. Back then, our focus was strictly on serving those in the medical industry. With healthcare in our heritage, we soon expanded to serve high-earning professionals in many other industries, providing all with leading-edge financial solutions, including our extensive network of community banks. Today, BHG Financial has firmly established its legacy as a leader in the financial services space. Founded on the philosophy of a better way to borrow, we are dedicated to helping accomplished professionals, small businesses, and institutions build upon their success through innovative financial solutions, a hassle-free process, and personalized concierge service. Our relentless commitment to the success of our customers is part of what has made BHG Financial thrive. We take a 360-degree view of our customers to tailor the best solutions for their financial aspirations. Today's professionals have multiple sources of income, not just their paycheck. Therefore, it is essential to factor those in when making responsible lending decisions. Our continued focus on data, analytics, and proprietary modeling has enabled faster funding for our customers. From business to personal loans to relationships with community banks, the country’s top professionals and business owners rely on us for our exceptional financial solutions and concierge service to continue their success and legacy. Who You AreThe Technology Services Engineering Manager at BHG Financial is a strategic and hands-on leader responsible for delivering exceptional end-user support across a diverse technology landscape. This role oversees the daily operations of the Service Desk team, ensuring the timely resolution of technical issues, seamless onboarding experiences, and consistent service excellence.The manager will support BHG’s user endpoint systems and applications, providing front-line support for Windows 11, macOS, iOS, Android, and AV technologies in conference rooms. The role also includes supporting Zoom, MS Teams, and other collaboration platforms to ensure smooth virtual and hybrid meeting experiences. The ideal candidate possesses a strong technical background, exceptional problem-solving skills, and a customer-first mindset, with proficiency in service management ticketing, such as Jira Service Management, and enterprise software such as Microsoft 365, VPN clients, RingCentral, and Remote Desktop. They excel at multitasking across platforms, guiding service engineers through performance management, project assignments, and professional development, while continuously improving processes and documentation. This role is critical to maintaining operational continuity, driving user satisfaction, and aligning IT support with BHG’s broader infrastructure and business goals.What You'll Do • Operational control: Oversee daily operations to ensure compliance with standards and achieve organizational objectives., • Shift scheduling: Manage shift scheduling to optimize staff coverage and operational efficiency., • KPI accountability: Monitor key performance indicators (KPIs), such as First Response Time, Resolution Time, Ticket Volume Trends, Backlog Volume, First Contact Resolution Rate, Reopen Rate, Escalation Rate, SLA Compliance Rate, Onboarding Readiness Rate, Process Improvement Implementation Rate, etc., to ensure alignment with performance targets and operational goals., • Service level adherence: Address all customer cases promptly within established SLA requirements and handle them professionally., • Quality assurance: Maintain high service delivery standards while continuously improving customer satisfaction., • Staff Coordination: Provide guidance and performance feedback to non-supervisory staff, ensuring alignment with operational goals and fostering accountability through clear direction and support., • Workflow Management: Strategically plan and oversee the workflow and time management of staff, assigning daily tasks and setting clear deadlines., • Best Practices Implementation: Assess current practices, implement best practice standards, and drive continuous improvement within the team., • Performance Reporting: Prepare and present comprehensive performance reports, evaluating team output and operational efficiency on Service Requests, Incidents, and Projects., • IT Inventory Control: Ensure a rigorous IT inventory process is maintained, including adherence to preventative maintenance schedules and protocols., • Warehousing Logistics: Responsible for the maintenance and upkeep of the IT equipment warehouse, ensuring that there is sufficient inventory on-hand to meet business needs, all equipment is organized, functional, and in optimal condition for use, and equipment is delivered in a timely fashion., • Program Development: Develop and implement programs and procedures designed to enhance the effectiveness and efficiency of IT systems and operations., • Hardware and Software Management: Oversee the management, installation, maintenance, and support of end-user hardware and software applications., • Training and Utilization: Facilitate the continued and expanded use of technology resources through effective implementation and coordination of training programs., • Hardware and Software Management: Oversee the management, installation, maintenance, and support of end-user hardware and software applications.What You'll Need, • A bachelor’s degree in Computer Science, Information Technology, or a related field, or equivalent experience., • 5+ years of experience in technical support or service engineering, with a minimum of 2 years in a leadership or managerial role., • Strong understanding of ITIL principles and service management best practices., • Proficiency in enterprise ticketing platforms (e.g., Jira Service Management, ServiceNow, etc.), • Familiarity with endpoint management tools such as Tanium, Microsoft Intune, Jamf, etc., • Knowledge of Active Directory, Microsoft 365, and common desktop/network troubleshooting techniques., • Deep understanding of Windows 11 system architecture, Group Policy, registry management, driver integration, troubleshooting methodologies, and integration with MDM platforms like Intune and Tanium., • Proficient in managing macOS environments, including system preferences, Terminal commands, software deployment, and integration with MDM platforms like JAMF, Intune, and Tanium., • Skilled in configuring, securing, and supporting mobile devices using MDM tools (e.g., Intune, Apple Business Manager, Android Enterprise)., • Experience with the installation, maintenance, and support of end-user hardware and software applications on Windows, macOS, iOS, and Android platforms., • Experience with the installation, maintenance, and support of Audio-Visual hardware and software in conference rooms., • Ability to work at a computer for 8+ hours/day, • Fine motor manipulation using a computer (mouse/keyboard), • Ability to lift 50lbs several times weekly, • In office presence daily with the local team, • Travel to other locations for support needs

Job DescriptionCompany Description Worldwide TechServices is a global leader in delivering technology services and solutions to the world’s most demanding clients. Headquartered in Billerica, MA; we provide infrastructure services and professional services to the world’s leading technology providers, outsourcers, large and small businesses and consumers. Job Description Dynamic Server Support is a senior position that performs tasks related to the repair of a variety of client products. Performs basic, moderately complex, and complex troubleshooting activities for desktops, laptops, Desk Side Support, ESF, and Servers. Interacts directly with clients to address technical issues and respond to them timely and accurately. Responsibilities • Provide customer support for designated equipment, • Answer client questions in a professional manner, • Accept and deliver all service calls assigned within the established service level agreement for each client, • Meet established customer service satisfaction criteria as outlined in established guidelines and policies, • Complete all administrative tasks associated with each call as documented in established policies and guidelines, • Complete real-time reporting of all calls as documented in established policies and guidelines, • Follow various established policies, guidelines, and documents relating to the successful delivery of service for each client, • Ensure control of assets and inventory through prompt turnaround of parts and equipment as required by client service agreements, • Report all activity in an accurate and timely manner, • Understand all Safety policies and guidelines and work within the guidelines of policies daily, • Additional requirements may exist if offer of employment is extended, • Other duties may be assigned to meet business needsQualifications Education and Experience: • Typically requires technical school certification or equivalent and 0-2 years of relevant experience, • Previous customer service experience is a plus Certifications and/or Qualifications: • Maintain all required OEM Certifications as directed by Management, • Knowledge of relevant software and hardware, • Valid Driver’s License and reliable transportation with valid registration and adequate insurance Skills: • Ability to communicate regarding technical issues with clients, • Ability to drive to client locations, • Ability to drive long distances, and occasional overnight assignments within other geographies, • Ability to lift and or move various computer equipment up to 50 lbs., • Must own a basic repair tool kit Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job Responsibilities • Perform a wide range of technical tasks including but not limited to:, • OS installations, hardware diagnostics, and software setup, • Structured cabling (including drilling, running, and dressing cables), • Telecom work (punch-downs, demarc extensions, etc.), • Work independently across various environments: retail, medical, restaurant, and corporate, • Maintain a high standard of professionalism with clients, • Be on call and ready to respond to service requests within your territoryPreferred Skills & Experience, • PC and printer troubleshooting experience (a strong plus), • At least 1 year of I.T. or Telecom experience, and one of the following:, • A+ Certification, • Network+ Certification, • OR 5+ years verifiable field experience in I.T./TelecomRequired Equipment & Qualifications, • Reliable personal vehicle (Public transportation not accepted), • Valid drivers license, • Must have a standard set of tools for basic I.T. and networking tasks (e.g., screwdrivers, cable testers, crimpers)., • Laptop with Ethernet port, • Smartphone with mobile hotspot, • Ability to accept job assignments based on your availability; being on-call 24/7 is a strong advantage., • Punctual, courteous, and presentableCompensation & Perks, • Paid hourly while on site, • 1099 contractor position, • Travel pay included (based on time travel; approx. 80-mile radius from home), • App-based tracking for job time and travel, • Exposure to new and exciting technologies and clients, • Opportunity to expand your skills and industry knowledgeAbout AMG Tech Support AMG is a trusted provider of I.T. and Telecom solutions to professional offices, medical facilities, restaurants, and retail operations nationwide. We specialize in structured cabling, point-of-sale configurations, and network infrastructure. Our mission is to deliver reliable, scalable, and efficient I.T. services that help our clients stay competitive and connected. Ready to take your I.T. career to the next level? Apply today and join a team that values flexibility, skill, and drive.

Job DescriptionBenefits: • 401(k) matching, • Free food & snacks, • Health insurance, • Paid time off Position: As a Network Support Technician you will be a member of a team that supports incoming requests, manages ticket queues and works with clients over the phone, and occasionally in person, to provide outstanding technical support in an ever changing network environment. Duties: This position will include the following duties at a minimum: • Manage tickets using our ticketing system (TK-Tracker2), • Manage endpoints, • Remote support, • Monitoring, • Reporting, • Support, • Backup monitoring of systems and networks, • Workstation & laptop support, • Phone configurations and support, • Antivirus system management, • Internet install and support, • TurnKey TV and Music system support, • Firewall support and updates, • TurnKey wireless network support, • On call rotation, • Makes follow up calls as required ensuring customer satisfaction., • Assists in installing, designing, configuring, and maintaining system hardware and software; analyzes, troubleshoots and tracks the nature and resolution of problems. Additional information: • Occasional travel may required., • Occasional overtime hours may be required., • Certifications are helpful. Requirements Working in technical support is preferred, however, if you have the ability, integrity and capacity to join our team we are willing to hire and train you for success. • Candidate must have the ability to lift 70 pound, use a ladder, and kneel., • Candidate must have the ability to multitask, • Candidate must be able to work as part of a team, • Candidate must be able to work in a flexible and growing environment, • Candidate must be able to communicate to customers with various levels of technical knowledge, • Familiarity with Microsoft Windows and Microsoft OfficeBenefits, • Employer provides the following benefits, • Health Insurance, • 401K Retirement account with matching, • Paid Time Off, • Free Direct deposit of your checking, • Free membership at EMPOWER FCU, • Free Parking