Trabajos medical assembly en Los Angeles, California - Page 3Crear alertas

Job DescriptionAbout Machina Labs: Engineering moves at software speed. Manufacturing doesn't. Yet. Machina Labs is changing that. We build intelligent, software-defined factories that produce complex metal structures directly from digital design. By integrating advanced metal forming, robotics, and automated production inside a flexible factory architecture, we enable customers to move from prototype to production in weeks, not years. Backed by Lockheed Martin, Toyota, and NVIDIA, we're building the manufacturing infrastructure that defense, aerospace, and advanced mobility programs will run on. If you want to work on hard problems that matter and see them fly, drive, and defend, this is the place. Job Description: Machina Labs is seeking a Manufacturing Engineer – Machine Production to join our growing team and help scale the next generation of robotic manufacturing systems. In this hands-on role, you will support the production ramp and process development of our RoboCraftsman forming cells, working at the intersection of robotics, advanced manufacturing, and production engineering. You will play a key role in transitioning engineering designs into scalable manufacturing systems, optimizing material flow, assembly processes, and facility layout while supporting the evolution of our robotic forming technology. This role is ideal for engineers who thrive in fast-paced environments and enjoy solving complex manufacturing challenges while bringing innovative hardware systems from early builds into reliable production. Key Responsibilities: • Support the scaling and development of Machina Labs’ RoboCraftsman forming cells, including optimizing assembly processes as production transitions from low-volume builds to higher-volume manufacturing., • Manage Bills of Materials (BOMs) by converting Engineering BOMs (EBOMs) into Manufacturing BOMs (MBOMs) structured for efficient material flow, routing, and assembly operations., • Design and develop jigs, fixtures, and tooling to support assembly, handling, and lifting operations; perform simulations and Finite Element Analysis (FEA) to validate designs and ensure performance and reliability., • Develop detailed work instructions, assembly procedures, method sheets, and in-process documentation to ensure repeatability, quality, and process consistency., • Support production planning activities including job planning, routing development, and scheduling; utilize ERP/MRP systems to manage work orders and coordinate production activities., • Partner with facilities and production leadership to support facility build-out and production cell optimization, applying Lean Manufacturing and 5S principles to improve workflow, reduce waste, and increase throughput., • Estimate manufacturing costs, develop time standards, and recommend tooling or equipment requirements for new or evolving product lines., • Collaborate closely with engineering teams to evaluate designs for manufacturability (DFM) and support engineering changes including ECOs, ECRs, first article inspections, and process improvements., • Work directly with production teams to troubleshoot technical issues, resolve bottlenecks, and improve process reliability in a fast-paced manufacturing environment., • Maintain accurate manufacturing documentation, reporting systems, and operational records to support production and continuous improvement initiatives.Required Background & Experience:, • 5+ years of Manufacturing or Operations Engineering experience in production environments, preferably in advanced manufacturing, robotics, aerospace, defense, or automotive industries involving complex assemblies., • Proven experience supporting low- to mid-volume production environments, including stabilizing processes, scaling operations, and managing engineering changes such as ECOs and process improvements., • Strong experience managing BOM structures, including converting EBOMs to MBOMs for efficient manufacturing workflows., • Proficiency designing production fixtures, jigs, and tooling using 3D CAD software such as SolidWorks, NX, or similar platforms; experience performing simulations and FEA analysis., • Strong understanding of manufacturing processes, equipment design, and process engineering principles, including Lean Manufacturing and 5S methodologies., • Experience developing work instructions, routings, assembly procedures, and process documentation., • Familiarity with ERP/MRP systems for production planning, work order management, scheduling, and material tracking., • Proficiency in 2D and 3D CAD for system layouts, schematics, and integrated mechanical system design., • Strong communication and collaboration skills with the ability to work across engineering, production, and leadership teams., • Proficiency with Microsoft Office Suite.Preferred Qualifications:, • Experience working with robotic or automated manufacturing cells, incremental sheet forming, or similar advanced manufacturing technologies., • Background in high-precision, low-volume production environments supporting mission-critical applications such as aerospace or defense structures.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! SENIOR MANUFACTURING ENGINEER - TURBOPUMP ASSEMBLY Based out of Rocket Lab's Headquarters for Long Beach, CA the Senior Manufacturing Engineer is responsible for the development of new products and product revisions as related to both Rutherford and Archimedes engines. This role will have primary responsibility over the turbopump assembly for the Archimedes engine. You will support the Director of Manufacturing Engineering and Production organization, with deliverables required for internal leadership, board of directors, and investors. (Please note - this position can be hired as a Senior Manufacturing Engineer I or Senior Manufacturing Engineer II level) WHAT YOU'LL GET TO DO: • Contribute to design reviews acting as an expert in design for manufacture, design for machining, productivity, quality control, etc., • Design, develop, and implement tooling and equipment for use in a production environment where appropriate to improve quality, delivery and/or cost performance., • Responsible for continuous improvement and cost reduction projects, • Collaborate with propulsion assembly technicians for general alignment, capability, and support., • Perform initial Value Stream Mapping Exercises, Method of Manufacture plans, cell design, etc., • Implement Factory layouts, Equipment selection, FAT, SAT, and production commissioning., • Develop production processes and ensure they are accurately and clearly documented, including testing procedures, health and safety requirements and supervisor signoffs., • Interface with the quality team to resolve manufacturing engineering quality responsibilities, and when required, lead problem containment and structured root cause & corrective action investigations., • Lead the continuous improvement process in your area using lean tools and techniques such as 5S QUALIFICATIONS YOU'LL BRING AS A SENIOR MANUFACTURING ENGINEER I: • Bachelor's degree in mechanical, aerospace, manufacturing engineering, or similar engineering discipline, • 5+ years of experience in a heavy development manufacturing environment, • Understanding of fluid and structural mechanics fundamentals, • Knowledge in manufacturing processes for aerospace materials QUALIFICATIONS YOU'LL BRING AS A SENIOR MANUFACTURING ENGINEER II: • Bachelor's degree in mechanical, aerospace, manufacturing engineering, or similar engineering discipline, • 8+ years of experience in a heavy development manufacturing environment, • Understanding of fluid and structural mechanics fundamentals, • Knowledge in manufacturing processes for aerospace materials THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Advanced engineering degree, • Experience with design, testing and development of turbopumps or similar turbomachinery, • Experience contributing to and steering design reviews and provide technical expertise in support of design for manufacture, test, and assembly, • Well versed in GD&T and inspection methods, • Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping, • Experience with 3D CAD software and tooling design ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise., • Availability to work long hours and weekends as needed based on test and launch schedules Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$115,000—$175,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionCompany Description Job Description Certified Tower Climber Technician 100% Travel | United States | Full-Time Position Overview Crown Innovations is seeking Certified Tower Climber Technicians to support the installation, inspection, repair, and remediation of communication towers and related infrastructure. This role is responsible for climbing communication towers and performing hands-on fieldwork to support mission-critical communications systems. The selected candidate must demonstrate strong attention to detail, a commitment to safety, and the ability to work at height in varying weather conditions. This is a 100% travel position, requiring deployment to job sites nationwide, often on short notice. Key Responsibilities Tower Climbing & Installation • Climb communication towers and related structures to perform installation, inspection, repair, and remediation activities, • Perform hands-on work at height in compliance with safety standards and project requirements Inspection & Documentation • Document tower conditions through photos, videos, and written reports, • Complete inspection checklists and technical documentation accurately, • Verify compliance with ANSI/TIA, OSHA, and other regulatory standards Field Operations & Support • Perform site preparation and cleanup, • Support material handling and movement of equipment, • Assist with structure assembly and installation activities, • Operate equipment as required and authorized, • Perform manual labor in support of tower and site work Team Collaboration • Work collaboratively with field and office personnel, • Support team operations to ensure project timelines and deliverables are met Safety & Compliance • Follow all company and industry safety protocols, • Utilize proper PPE, rigging practices, and fall protection systems, • Maintain compliance with all applicable safety regulations and standards Minimum Required Qualifications • Certified Tower Climber (ComTrain, SPRAT, or equivalent), • Minimum 1–2 years of tower climbing experience, • Familiarity with tower types including monopole, guyed, and self-supporting structures, • Knowledge of rigging practices, PPE, and fall protection systems, • Ability to read and interpret tower drawings, inspection checklists, and technical reports, • Strong documentation and communication skills, • Valid driver’s license with a clean driving record, • Willingness to travel and work flexible hours as required, • Ability to pass a drug screening and background check Travel & Work Requirements • This is a 100% travel position across the United States, • Travel may be required on short notice based on project needs, • Employees are required to cover travel-related expenses in advance, which are reimbursed by Crown every 10 days in accordance with company policy Physical & Work Environment Requirements • Ability to work at heights for extended periods, • Ability to perform physically demanding work in outdoor environments, • Ability to work in varying weather conditions including heat, cold, and rain, • Ability to perform manual labor and handle materials and equipment safely Preferred Qualifications • First Aid / CPR and rescue training, • Certified Competent Climber / Rescuer, • OSHA 10 or OSHA 30 certification Schedule & Work Environment • Typical field schedule consists of extended 10-hour workdays, • Work may require non-standard hours based on project requirements, • This is a 100% travel position Compensation Hourly Rate Range: $35 to $40 per hour (W2) Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations. Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs. Benefits • Medical insurance and prescription drug coverage, • Dental insurance, • Vision insurance, • Life and AD&D insurance, • Long-term disability insurance, • Short-term disability insurance, • Paid time off and paid holidays, • Retirement plan with company match About Us Crown Innovations is a recognized leader in research, development, and engineering, with deep expertise in air traffic management, survey administration, lifecycle data management for informed decision-making, infrastructure sustainment and modernization, emerging technologies, and National Airspace System (NAS) integration. For over 30 years, we have supported a diverse portfolio of clients—including the FAA, NASA, the Energy Information Administration (EIA), state and local governments, and commercial organizations such as the Ohio and North Carolina Departments of Transportation. As a prime contractor on several high-impact federal programs, Crown offers comprehensive capabilities in engineering, strategic planning, data analytics, software development, modeling and simulation, and regulatory compliance. We are at the forefront of enabling the safe and efficient integration of uncrewed aircraft systems (UAS) and advanced air mobility (AAM) into the NAS, while also supporting infrastructure modernization efforts through robust lifecycle data management solutions. Whether advancing innovative air traffic concepts, enhancing operational performance, or enabling the future of urban air mobility, Crown is committed to shaping a safer, smarter, and more efficient infrastructure landscape. Crown has consistently been voted one of the best places to work in the Washington, DC Visit: for additional information about Crown Innovations, Inc. We offer a competitive benefits package including a matching 401K, comprehensive medical, dental, and vision plans, and generous PTO. Crown has been voted one of the best places to work in the Washington, DC area; we built this reputation by hiring great people who value and support the mission of our customers. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3068. As a government contractor, most of the Crown positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. The Role We are seeking an experienced, hands-on Facilities & EHS Manager to lead the stand-up and ongoing operation of our new ~80,000 sq. ft. flagship manufacturing facility in Cypress, CA. This site will become the primary production hub for the company. This role is responsible for owning all aspects of facilities, environmental health & safety (EHS), and equipment maintenance across the site. You will play a critical role in bringing the factory online, partnering with construction teams, managing contractors, ensuring regulatory compliance, and building the systems and processes required to support a high-performing manufacturing environment. Reporting to the Head of Production, you will serve as the single-threaded owner for facility operations, safety programs, infrastructure reliability, and site readiness. You will also provide liaison support to our Redondo Beach site as needed. This role requires a highly independent operator who can build, scale, and maintain systems in a fast-paced, high-growth manufacturing environment. What You'll Do Facility Build-Out & Contractor Management (25%) • Support the bring-up of the Cypress facility, partnering with internal stakeholders and external contractors to ensure on-time, on-budget execution, • Manage construction projects, vendors, and contractors with a focus on minimal disruption to operations., • Oversee installation and commissioning of facility infrastructure (power, HVAC, compressed air, etc.), • Point of contact for landlord. Responsible for upkeeping compliance to Senra's lease agreements, • Own the maintenance, repair, and operation of all facility systems including building infrastructure, HVAC, electrical systems, and industrial utilities, • Develop and execute preventative maintenance programs for both facility systems and production equipment, • Ensure uptime, reliability, and scalability of all site infrastructure, • Develop and execute site improvement and expansion plans to support production growth and rate increases, • Lead capital planning efforts for facility upgrades and infrastructure investments, • Own and drive a zero-incident safety culture across the site, • Ensure full compliance with OSHA, environmental regulations, and all applicable local/state/federal codes, • Develop, implement, and maintain EHS programs including:, • Lockout/Tagout (LOTO), • PPE assessments, • Hazard assessments and Job Safety Analyses (JSAs), • Oversee hazardous material storage, labeling, handling, and disposal, • Conduct regular safety audits, inspections, and compliance reviews, • Lead investigations for incidents, near-misses, and corrective actions, • Develop and deliver safety training programs for all employees, • Provide facilities and EHS support to the Redondo Beach site as required, • Train employees on facility operations, safety procedures, and compliance standards Required • 10+ years of experience in facilities management, engineering, construction, or a related field, • 5+ years of direct experience in facilities management, preferably in a manufacturing or startup environment, • Strong working knowledge of building systems including HVAC, electrical, plumbing, and industrial utilities, • Experience managing construction projects, contractors, and vendors, • Deep understanding of OSHA regulations, EHS programs, and compliance requirements, • Experience developing and executing preventative maintenance programs, • Demonstrated ability to independently manage complex projects in a fast-paced environment, • Strong organizational, problem-solving, and communication skills, • Bachelors degree in Engineering, Construction, Industrial, or Operations, • OSHA certifications (e.g., OSHA 30), • Experience in aerospace, automotive, or high-mix manufacturing environments, • Experience standing up or scaling manufacturing facilities, • Background in capital planning and facilities budgeting Within 6–12 months, you will have: • Successfully supported the full bring-up and stabilization of the Cypress facility, • Established reliable, scalable systems for facility operations and preventative maintenance, • Built and enforced a strong EHS culture with zero major safety incidents, • Ensured full compliance with all OSHA, environmental, and building code requirements, • Delivered key facility and infrastructure projects on time and within budget, • Created clear processes and ownership for contractor management and third-party services, • Enabled high uptime and reliability of facility systems to support production growth, • Salary Range: $120,000-165,000, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$1—$10 USD

Job DescriptionLong Wall Company was created in 2024 to accelerate missile defense technology for the U.S. and our allies. Building on the RS1 and GS0 launch systems, Long Wall develops containerized, mass-producible missile defense systems and offers rapid, low-cost flight testing. We believe that the future of global security and stability require defensive technology that is lower cost, higher performing, better tested, and more broadly distributed than is possible today. Join us. What we look forMission-Driven Problem Solvers. The aerospace frontier demands ingenuity. We want Team members who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission. Total Ownership. We seek staff and engineers who take full responsibility for contributing to and delivering flight-ready work while recognizing that no one succeeds alone. The best engineers, corporate professionals, and technicians make their teammates better. Knowing that complementary skills create force multiplication and drive mission success. POWER ELECTRONICS ENGINEER As a Power Electronics Engineer, you will lead the development, design, build, and commissioning of power conversion systems at Long Wall to support product tests, operations, and launches. You will have the opportunity to be a key member of a small team of mechanical, fluid, and electrical engineers working to develop innovative deployable launch solutions that enable the rapid deployment of Long Wall launch and test systems. This individual will be responsible for electrical design, test, and integration, from concept to production, while ensuring alignment with strategic business goals. The engineer could also be involved in managing key vendor relationships and ensuring performance and reliability in our cutting-edge launch technologies. This is a role that contributes to every mission and every flight we fly as we continue to reimagine the future of missile defense systems. RESPONSIBILITIES: • Serve as a subject matter expert for power conversion activities within your assigned product(s)., • Develop electrical architecture, specification, component selection, circuit board design, implementation, verification, board bring up and debugging., • Partner with software, mechanical, thermal, manufacturing teams and production test teams., • Derive engineering justification to resolve production issues throughout assembly, test, and vehicle integration BASIC QUALIFICATIONS:, • Bachelor’s degree in electrical engineering or a similar field AND 10+ years of working in space, aerospace, or equivalent professional environments with direct hands-on experience developing complex electrical power conversion systemsOR, • Master’s degree AND 8 years of relevant experience, • PhD AND 5 years of relevant experience SKILLS AND EXPERIENCE:, • M.S. from an accredited university in engineering or science, • 5+ years of electronic product experience designing hardware from concept through production; strong emphasis on full life cycle development of new hardware products and not small incremental updates to legacy hardware., • 5+ years of experience in electrical engineering specializing in power electronics, switch-mode topologies, and feedback controls., • High level of proficiency designing and implementing electrical sizing of motors, cables, circuit protection, VFDs, motor starters, various other motion systems, • High level of proficiency with designing signal conditioning circuits, digital circuits, and switching power converters, as demonstrated by successful fielding of multiple products, • High level of proficiency with lab equipment for development testing of circuits and components, including sophisticated test definition, troubleshooting, data collection, and data reduction techniques, • Self-starter with demonstrated experience on multiple projects making hardware work within demanding time and resource constraints, • Excellent communication skills both written and verbal., • Experience working across engineering groups to define requirements and implement solutions, • Demonstrated ability utilizing CAD design software (e.g. Altium Designer, NX, Zuken), • Experience with Teamcenter or other PLM system GENERAL REQUIREMENTS:, • Ability to sit or stand for extended periods of time, • Ability to use a computer to complete assignments, • Ability to communicate with individuals and groups in person, by phone, and telepresence, • Ability to pick up to 50lbs, • While performing the duties of this job, the employee will typically work in an office environment, • Ability to travel up to 25% of the time This is the lowest-to-highest compensation range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. In addition to base pay and equity, we offer:, • Heavily employer-subsidized medical, dental, and vision insurance plans, • Long Wall paid life insurance and LTD coverage, • 4% 401k match, • Student loan repayment assistance program, • Paid parental leave, • Family planning assistance program, • Long Wall paid financial wellness program, • Paid time off for non-exempt employees and a flexible vacation policy for exempt employees ITAR RequirementThis position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position. Equal Opportunity EmployerWe are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle, and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now! General Machinist / Tool maker Department: Machine Shop Department/ Area: Tool room Position Summary: · Perform machine set ups. · Interpret design schematics, cut and shape dies, and assemble the completed parts. · Manufacture fixtures and tooling for production machining, assembly, and inspection needs. · Must be able to work from engineering models using sketches. · Read prints and sketches and understand verbal and written instruction Minimum Qualifications: Minimum 5 years experience. Must be able to use all tool room machinery, Bridgport Mill, Hardinge Lathe, Manual Lathe, conventional mill, to produce precision components. Machine tolerances of +/- .0001 Be able to use all precision measuring instruments. Collaborate with engineering on design for manufacturability. Work independently and as a team. Work with carbide is a plus. Reporting Relationships: Department supervisor Working Conditions: All day standing, repetitive manual motion, heavy physical work. Walking to monitor several machines. Position type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job DescriptionDescription As a Senior Propulsion Component Engineer (Fluids) at Impulse, you will own all aspects of component design from concept to product realization, while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. Responsibilities • Design propulsion system valves and fluid components including cryogenic, high pressure and high temperature systems, • Own all aspects of component design from initial concepts to product realization, • Generate detailed CAD models and manufacturing drawings, • Perform fluid, thermal, and structural analysis as required, • Establish assembly procedures and work hands-on with technicians to refine this process, • Define and support rigorous component development and qualification testing, • Bachelor’s degree in engineering or related field, • 5+ years of demonstrated experience in valve or component design, • A strong understanding of component design including: materials selection, compatibility, seals, wear, and force/torque margin determination., • Hands-on experience working with fluid, electrical and mechanical systems, • Demonstrated proficiency in CAD software with ability to learn new tools, • Demonstrated ability in requirements definition, conceptual design, procurement, fabrication, assembly and testing of hardware Preferred Skills and Experience • Experience designing and operating high reliability, high performance hardware, • Experience with low leakage, on-orbit propulsion components, • Experience in a startup or agile development environment, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SUPPLY CHAIN Rocket Lab's Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers' missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up the assembly kits that enables our technicians to put together our Electron & Neutron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together, and are critical to our success. SENIOR INVENTORY COORDINATOR II Based onsite at Rocket Lab's global headquarters in Long Beach, CA, the Inventory Coordinator is tasked with all aspects of inventory management from receiving, putting into inventory, counting, and kitting, inwards and outwards goods. There are thousands of components that are used on Electron and millions of dollars of inventory that need to be received, stored, and kitted for production maintaining inventory accuracy through adherence to process, and customer satisfaction of just-in-time fulfillment makes an Inventory Coordinator a critical role in the "last mile" of our supply chain. WHAT YOU'LL GET TO DO • Receive inwards goods on a FIFO basis and ensure SOP's for processing of inwards goods are adhered to, • Ensure accurate and on time delivery of components and production kits in accordance with production & transfer order plans / priorities, • Ensure supply of Kanban materials to shop floor is sustained, • Raw material movements and replenishment, • Receive inwards goods on a FIFO basis and ensure SOP's for processing of inwards goods are adhered to, • Ensure accurate and on time delivery of components and production kits in accordance with production & transfer order plans / priorities, • Ensure SOP'S are followed, and stock point accuracy is maintained, • Participate in a daily cycle counting program., • Ensure FIFO is managed and maintained to achieve appropriate stock rotation, • Maintain stock point accuracy and ensure LN accurately reflects actual stock movements. Investigating and resolving any discrepancies., • Additional duties as reasonably required YOU'LL BRING THESE QUALIFICATIONS: • High school diploma and 2+ years of experience, • Proficient using Microsoft Products (Outlook, Excel, Word, Power Point, Access), • Knowledge of MRP/ERP systems THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Associate's Degree or Bachelor's Degree, • Experience in aerospace, automotive, or other heavy manufacturing, • Experience with control and tracking of serial, and lot controlled materials., • Experience with ERP Systems, • Prior experience in high-paced, rapid growth environment, • Team oriented, strong ability to multi-task and work in a fast-paced environment and to multiple deadlines, • Strong organizational skills with the ability to prioritize effectively and efficiently ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25—$30 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionDescriptionAt Impulse Space, we design and test the hardware and software that power groundbreaking space missions. As a Spacecraft Testbed Engineer at Impulse, you'll build and operate the testbeds that simulate real-world missions, enabling critical testing of avionics, propulsion, embedded software, and flight software. Your work will directly contribute to ensuring mission success for vehicles that operate in some of the most demanding environments imaginable. Responsibilities • Develop and construct testbeds for vehicle mission simulations, • Lead the integration of avionics electrical systems, simulation hardware and software, and supporting equipment, • Install harnesses, interface devices, and adapters to connect vehicle avionics with data acquisition and control hardware, • Design custom load boards and test interfaces for simulating avionics signals and loads, • Support fabrication, assembly, and validation of load boards and other electrical test hardware, • Contribute to the design and deployment of full-stack test programs to validate new software and hardware revisions, • Work closely with the Software and GNC teams to develop and improve our test and deployment pipelines Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, • 2+ years experience with hardware-in-the-loop (HITL), hardware-software integration, or embedded systems testing, • Hands-on experience with electronics test equipment, including power supplies, oscilloscopes, digital multimeters (DMMs), signal generators, and electronic loads., • Experience in Bash, Python, and/or other scripting languages Preferred Skills and Experience • 5+ years proven experience in test system development for embedded or avionics systems, • Strong debugging skills in both hardware (analog/digital) and software (Python, C++), • Familiarity with Linux-based development and deployment environment, • Experience with networking (TCP/IP, serial protocols) and remote hardware control Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionOPTO-MECHANICAL BUILD ENGINEER Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. In this role, you will be responsible for leading the development and deployment of custom opto-mechanical systems for the world's most advanced metal 3D printing systems. You will establish and scale processes for how we build, assemble, align, and integrate opto-mechanical systems. You will work with high-power lasers, high-speed cameras, and other proprietary hardware and software to integrate novel capabilities. This is a hands-on role in which you will be expected to own hardware development, testing, and implementation yourself. Opto-mechanical systems lie at the heart of our technology, so this is a high-impact opportunity at a rapidly growing deep-tech company. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Build, assemble, align, and deploy complex opto-mechanical systems., • Develop procedures for scaling in-house opto-mechanical build processes from prototype to volume production., • Integrate high power lasers and high-speed camera solutions., • Design mechanical solutions to integrate optical design with precision and repeatability., • Create drawings specifically to opto-mechanical GD&T standards., • Establish and own the precision alignment process including method, procedure, and software used., • Perform test and characterization of optical performance including process, equipment selection, and passing criteria., • Work closely with process engineering team to solve physics-based interdependencies., • Work closely with mechanical, electrical, and software engineering teams to develop a robust and scalable system architecture. Basic Qualifications: • Bachelor's degree in Optics/Optical Engineering, Mechanical Engineering, or Physics, and 2 years of hands-on professional experience; or a Master's degree in one of these disciplines and at least one hands-on opto-mechanical internship., • Hands-on experience with opto-mechanical systems (build, assembly, alignment, etc.)., • CAD experience, including GD&T and detailed drawing documentation as it relates to opto-mechanics., • Strong mechanical engineering and physics fundamentals. Nice to Have: • Master's degree in optical engineering or mechanical engineering., • Experience with high power lasers (tens to hundreds of watts)., • Experience designing optics for industrial systems such as semiconductor (i.e. etching), laser cutting, long distance laser communication, etc., • Basic understanding of image and signal processing., • Knowledge of motion control and kinematics., • Experience with design of fluid or thermal systems. Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. * Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $90,000-$200,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. Role Overview: The Quality Inspector role will be responsible for performing in-process and final inspections of harnesses and hardware to ensure compliance with internal, external, and industry specifications. This role plays a key part in supporting production goals, driving continuous improvement, and ensuring the on-time delivery of high-quality products. The ideal candidate will have strong attention to detail, a quality-first mindset, and the ability to work collaboratively across functional teams. What you'll own: • Perform in-process and final inspections of hardware against engineering drawings, industry specifications, and internal/external quality requirements., • Conduct incoming inspections as required to support production timelines., • Create and maintain inspection documentation, including First Article Inspection Reports (FAIRs), Inspection Reports, Certificates of Conformance (CoC), and End Item Data Packages (EIDPs)., • Ensure the delivery of high-quality products from Senra's manufacturing team, supporting production, operations, and delivery targets., • Collaborate with cross-functional teams to drive root cause analysis (RCA) and corrective actions (CAPA) for quality-related issues., • Drive Non-Conformance Reports (NCRs) to closure, supporting disposition, approvals, and verification activities as required., • Investigate, document, and resolve product and process issues, ensuring proper corrective actions are implemented and verified., • Identify and recommend process improvements that enhance product quality, reduce inefficiencies, and support lean manufacturing initiatives., • Perform product testing on hardware as required to verify performance and quality., • High school diploma or equivalent (Associate's or Technical Degree in a related field preferred)., • 2+ years of experience in quality inspection, production, or manufacturing roles, • Hands on experience inspection of harnesses to IPC-620 or NASA 8739.4 Class 3, • Familiarity with inspection techniques, root cause analysis (RCA), and corrective action processes (CAPA)., • Ability to read and interpret engineering drawings, blueprints, and industry specifications., • Experience with quality management systems (QMS) and non-conformance reporting (NCR) processes., • Strong documentation skills, with experience in creating First Article Inspection Reports (FAIRs), Certificates of Conformance (CoC), and End Item Data Packages (EIDPs)., • Strong problem-solving, organizational, and multitasking skills,, • Hands on experience inspecting aerospace or defense hardware, • IPC-620, IPC-610 and NASA-STD-8739.4 certified, • Compensation will be based on experience, qualifications, and other job-related factors., • Hourly Range: $24.00- $36.00, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$24—$36 USD

Job Description SUMMARY Without the strength of our employees, we would not be able to offer the industry-leading service we’re known for. We truly believe in excellent jobs for AMAZING people! In this role, the qualified candidate will perform Laser Inspection in support of product conformance and generate the required inspection data packages. Work with Customer Representatives (source inspectors) in presenting / verifying conformance prior to delivery. Assist manufacturing in verifying assembly. The Laser inspector shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBILITIES · Support AS procedures and continuous improvement efforts. · Maintain a clean and organized work environment. · Generate inspection reports. · Perform Laser/ mechanical and visual inspection on product utilizing both engineering data and electronic models. · Present product and data packages to Customer source inspectors. · Work with Production to support inspection schedules. · Any other duties as assigned. · Must understand how customer products are impacted in the event of failure KNOWLEDGE & REQUIREMENTS · Must be detail oriented, extremely organized, must possess excellent communication skills. · Must have excellent blue print/ Model interpretation skills. · Must have working knowledge of Customer requirements / specifications. · Must have working knowledge of Master Cam & VERISURF software. · Must have working knowledge of Laser equipment utilizing VERISURF. · Must have working knowledge of Catia modeling software. · Must have direct communication with internal customers. · Must be trained of applicable changes & customer requirements. · Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION & EXPERIENCE • High school graduate or equivalent in work experience., • Three (3) + years' experience in inspecting machine parts and assemblies using including LASER Technology & Practices., • Three (3) + years’ experience using Laser Inspection., • Three (3) + years' experience working with Customer Source Inspectors. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. TRAVEL REQUIREMENTS: No travel required for this position. PHYSICAL REQUIREMENTS: As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. Monday to Friday | 5pm to 5am, Saturdays as needed

Job Description Head of Manufacturing - Lead the Scale-Up of Advanced Optical Hardware Production! Gardena, CA | On-site Opportunity Summary A rapidly growing deep-tech startup in Southern California is seeking a Head of Manufacturing to lead the development and scaling of its production operations. The company is building advanced hardware platforms that leverage cutting-edge optical technologies expected to play a central role in next-generation computing, communications, and sensing systems. This role will oversee manufacturing strategy and factory execution as the organization transitions from early production into larger-scale manufacturing. The Head of Manufacturing will drive the design of automated production systems, optimize yield and throughput, and build the engineering organization required to sustain growth. This position is ideal for someone who has scaled complex hardware manufacturing environments and enjoys balancing strategic system design with hands-on problem-solving on the factory floor. About Us We are an emerging technology company focused on enabling the next generation of advanced hardware platforms through innovations in optical systems and high-precision manufacturing. Our mission is to bring advanced technologies out of the lab and into scalable production environments that can support widespread adoption across multiple industries. Our team combines expertise across engineering, manufacturing, and automation to build reliable production systems capable of delivering complex electro-mechanical and optical assemblies at scale. Job Duties • Lead manufacturing engineering strategy and overall production execution across the factory, including line ramp, capacity planning, and readiness for new product introductions, • Develop and deploy automated production cells for precision optical and electro-mechanical assemblies, integrating robotics, alignment technologies, inspection systems, and automated testing, • Partner with product, mechanical, optical, and process engineering teams to transition new products into manufacturing while driving design for manufacturability and design for assembly improvements, • Establish scalable production workflows including line layout, material flow, traceability systems, and inventory management to support increasing production volumes, • Oversee factory data infrastructure and hardware-side MES integration to enable real-time performance tracking, traceability, and data-driven decision making, • Track and improve core factory performance metrics including yield, cycle time, uptime, throughput, scrap rates, and equipment reliability, • Build and lead the manufacturing engineering organization including production engineering and operational leadership roles as the factory grows, • Work closely with supply chain and procurement teams to qualify components and materials while ensuring supplier quality meets production targets, • Develop and maintain process documentation including control plans, qualification procedures, and standardized manufacturing instructions Qualifications • Experience scaling automated production lines beyond pilot builds and early NPI into stable, high-volume manufacturing environments, • Strong background in automation integration, production system architecture, and automated manufacturing cell design, • Demonstrated ownership of production ramp performance including yield improvement and throughput optimization in complex hardware manufacturing, • Experience building and managing manufacturing engineering teams including hiring, mentoring, and organizational development, • Proven ability to collaborate cross-functionally with product development, mechanical engineering, and process engineering groups, • Experience implementing or expanding manufacturing execution systems and production data infrastructure, • Strong analytical and problem solving skills with a data-driven approach to improving factory performance, • Willingness to work extended hours or weekends when necessary to support production milestones Preferred Experience • Experience working with micron-scale assembly, optical alignment systems, or chip and die level packaging processes, • Background in semiconductor, photonics, advanced packaging, or high precision electro-optical manufacturing environments, • Experience scaling manufacturing operations in fast growing hardware companies including launching new production lines or facilities, • Experience integrating factory automation technologies such as robotic handling systems, machine vision inspection, and in-line metrology tools, • Familiarity with statistical process control, process capability analysis, and reliability testing methodologies, • Experience managing relationships with equipment vendors and integrators for specialized or custom manufacturing tools, • Experience operating in cleanroom or controlled manufacturing environments Why Join Us • Opportunity for growth within a rapidly expanding deep-tech company, • Work at the forefront of advanced optical hardware and manufacturing innovation, • High ownership environment with the ability to shape factory strategy and operations, • Collaborative engineering culture focused on solving complex technical challenges, • Flexible work environment, • Strong PTO policy, • Medical, dental, and vision benefits, • 401k retirement plan, • Equity participation opportunities Compensation Details Salary range: $170,000 - $210,000 #LI-AV

Job Description About Castelion Castelion is redefining defense development through rapid iteration, aggressive testing, and modern commercial manufacturing at scale. We design, build, and test next-generation long-range strike weapon systems to give the United States and its Allies a decisive advantage and deter future conflicts. Role Overview The Manager, Propulsion Engineering, plays a central role in delivering high-performance rocket motor systems at speed and scale. This position combines deep technical expertise in solid propulsion with strong engineering leadership, guiding a team responsible for the design, development, and production of solid rocket motor systems and key propulsion components. This leader owns both technical direction and team execution, ensuring designs are robust, manufacturable, cost-effective, and aligned with aggressive program timelines. The role requires someone who can operate decisively in a fast-paced, resource-constrained environment while building a high-performing engineering culture. Responsibilities Technical Leadership & Ownership • Lead the design and development of solid rocket motor primary and secondary structures, propulsion components, and interfaces., • Drive motor design and propellant-related decisions, ensuring performance, safety, manufacturability, and cost targets are met., • Translate program objectives into scalable, production-ready designs aligned with speed and affordability goals., • Oversee CAD models and drawings, ensuring compliance with internal standards and ASME Y14.5 GD&T practices., • Guide rapid iteration cycles, validating designs through testing and enabling fast design evolution., • Provide technical authority for hardware discrepancies, failure investigations, and corrective actions., • Build, lead, and scale a high-performing propulsion engineering team., • Establish and reinforce a strong engineering culture focused on ownership, accountability, and execution., • Mentor engineers across experience levels, fostering both technical depth and independent decision-making., • Ensure the team delivers high-quality work on aggressive timelines with clarity of priorities and accountability., • Communicate effectively with customers, leadership, and cross-functional teams., • Navigate and collaborate with government stakeholders and program partners., • Ask tactful but critical questions to uncover risks, challenge assumptions, and improve outcomes., • Stay close to the hardware by supporting assembly, integration, testing, and troubleshooting., • Provide expert guidance during prototype builds and production ramp-up., • Bachelor's degree (or higher) in aerospace, mechanical, materials, manufacturing engineering, physics, or related field., • 7+ years of experience in propulsion, mechanical systems, or fluids design, analysis, or testing., • Demonstrated experience in rocket motors or propulsion systems., • Proven ability to lead projects or small teams in a technical environment., • Deep expertise in solid propulsion, including:, • Motor design, • Propellant formulation and behavior, • Experience with liquid propulsion systems (as a complement to a strong overall propulsion background)., • Hands-on experience with rapid product development and high-rate manufacturing., • Proficiency in CAD tools (NX, Creo, CATIA) and GD&T per ASME standards., • Experience with aerospace materials (metals, composites, plastics)., • Familiarity with insensitive munitions standards and practices. Benefits And Perks All full-time employees are granted meaningful long-term equity, sharing in the company's significant growth trajectory. We offer four (4) weeks of paid time off, ten (10) company-paid holidays, and comprehensive health benefits - including 100% employee-covered medical and strong dependent coverage, along with dental and vision plans. We also provide paid parental leave to support growing families, a $100 monthly fitness stipend to promote health and performance, and onsite EV charging for convenience. In addition, employees enjoy perks like catered meals, company-covered food during high-demand periods, and a fully stocked kitchen to stay fueled throughout the day. While this position does not currently require a U.S government-issued security clearance, it may in the near future. Therefore, the ability to obtain and maintain a U.S. government–issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Affirmative Action/EEO Statement Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! ADDITIVE MANUFACTURING TECHNICIAN I/II - B SHIFT Based onsite at Rocket Lab's global headquarters in Long Beach, California the Additive Manufacturing Technician II is responsible for supporting various Additive technologies (LPBF, DED, Hybrid Solutions) with various alloys. This role will support all Additive processes involved with the Rutherford & Archimedes engines. You will support the Manager of Additive Manufacturing and Production Additive Manufacturing organization, with deliverables required for internal leadership, board of directors, and investors. This opening is for B Shift Monday - Friday from 1pm-9:30pm PST. WHAT YOU'LL GET TO DO: • Uphold and follow all Additive safety measures – be an advocate for safe operations., • Prepare additive print jobs for success through attention to detail on setups., • Operate a variety of metal 3D printers, experience with EOS, SLM, & DMG preferred., • Identify and troubleshoot mechanical, optical laser, electrical, and build issues., • Conduct calibration of 3D Printers and interpret findings with Engineering., • Ensure conformance of part/build through independent inspection and print detail verification., • Follow work orders, procedures, specifications, and test instructions with attention to detail. Communicate any issues that are found., • Perform daily, weekly, and monthly preventative maintenance – as directed by Engineering., • Provide process improvement feedback and implement solutions in collaboration with Engineering., • Collaborate with Engineers on setup and fabrication of 3D prints and new hardware., • Kick off issue tickets based on process/product non-conformances., • Drive Additive Internal 5S system with actions promoting sustainability in the Additive Department., • Utilize measurement tools (micrometer, caliper, surface plate etc.) to ensure high quality inputs and outputs, including post-print inspection and post-processing inspection. (Please note: this position can be hired at the Additive Manufacturing Technician I or Additive Manufacturing Technician II level) YOU'LL BRING THESE QUALIFICATIONS AS AN ADDITIVE MANUFACTURING TECHNICIAN I: • 1+ years of experience in manufacturing, fabrication, assembly or testing environment., • Proficient in hand, power, and pneumatic tools such as drills, chisels, taps., • Proficient in inspection methods: surface plate, calipers, micrometers, height gauge., • Experience with operating machine tools: vertical mills, lathes, media blasters, cranes, or forklifts., • High School diploma or GED YOU'LL BRING THESE QUALIFICATIONS AS AN ADDITIVE MANUFACTURING TECHNICIAN II: • 2+ years of experience in a manufacturing, fabrication, assembly or testing environment., • Proficient in hand, power, and pneumatic tools such as drills, chisels, taps., • Proficient in inspection methods: surface plate, calipers, micrometers, height gauge., • Experience with operating machine tools: vertical mills, lathes, media blasters, cranes, or forklifts, • High School diploma or GED. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • 4+ years of experience with operating metal 3D printers and knowledge of associated hazards Experience with Additive Manufacturing (AM) principles., • Experience interpreting engineering drawings., • Experience using JIRA. ADDITIONAL REQUIREMENTS: • Ability to work the following shift, Monday-Friday 1pm-9:30pm PST., • Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position, • Able to lift up to 25lbs. unassisted, • Must be able to climb ladders and be comfortable working in tight spaces., • Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25—$35 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Senior Motor Design Engineer Radiant is seeking a talented Senior Motor Design Engineer to design and develop an alternator for the nuclear-driven, high-speed power generator. Responsibilities include but are not limited to the design of active parts, and the structural and thermal analysis of high-speed generators.You will collaborate with engineers cross-functionally and partner closely with the Power Conversion and Electrical Systems team responsible for converting mechanical energy to electrical to be delivered to customers safely and reliably. The successful candidate will own active part design of generators, along with performing analysis, simulation, and component selection. You'll make a big impact in commercializing Earth's first mass-produced nuclear reactors and power remote areas and critical infrastructure with abundant clean energy. Responsibilities and Duties: * Own design, development, and integration of high power alternator and primary loop motor for a nuclear power generator * Apply electromagnetic design and testing for a closed-loop Brayton cycle and its electric motor/generator components * Create 3D models and 2D fabrication drawings in CAD and NX * Own communications with vendors to source all components to build the generator * Perform bench testing, dynamic testing, and system testing for all subsystem components and models * Perform hands-on assembly, rapid prototyping, and integration of high voltage electric motors and generators Required Skills and Qualifications: * B.S. in Electrical Engineering, or mechanical engineering specializing in power electronics * 5+ years of design experience designing high-voltage and high-power electric motors and/or generators * Fundamental knowledge of electric motors * Expert in design of different types of permanent magnet motors in +1kV, +1MW applications with speeds +40krpm Desired Skills and Qualifications: * 8+ years of generator design * M.S in Electrical Engineering, or Mechanical Engineering specializing in power electronics * Knowledge of motor control systems including SVM * Deep understanding of Power Electronics and interaction of electronics circuits with electromagnetics components * Define and optimize generator requirements and update design to comply with system level limitations and specifications * Great team player with one team mentality working with turbomachinery, power electronics, thermal, packaging and software teams Additional Requirements * Must be willing to work extended hours and weekends as necessary to accomplish our mission * Must work 100% onsite at El Segundo HQ Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $158,000 - $247,275

Job Description About Us: We are a manufacturer of high-quality steam autoclaves used in various industries including hospital, commercial medical waste processors and flight kitchen applications. We are seeking a skilled and reliable Mechanical Service Technician to join our team. This position requires hands-on experience in mechanical assembly, steam piping, and electrical systems. Key Responsibilities: • Install trim on steam autoclaves (valves, drainage assembly, vacuum skids and air panels) to ready the unit for shipping., • Perform steam piping fabrication and installation (threaded, welded, or copper piping)., • Wire and connect electrical components including control panels, sensors, and safety devices., • Troubleshoot and repair mechanical and electrical issues during assembly and testing., • Interpret mechanical and electrical drawings, schematics, and piping diagrams., • Ensure all work meets applicable safety and quality standards., • Collaborate with engineering and production teams to improve build processes., • Perform service calls on units in the field (Southern Ca.), • 3+ years of hands-on experience in mechanical assembly, piping, or industrial equipment manufacturing., • Proficiency in steam piping (threaded, welded, or copper)., • Basic to intermediate knowledge of electrical wiring and components., • Ability to read and interpret mechanical and electrical schematics., • Strong troubleshooting and problem-solving skills., • Ability to work independently and as part of a team., • Experience working with pressure vessels, boilers or autoclaves., • Familiarity with control systems., • Competitive pay based on experience., • Health, and dental insurance., • Paid time off and holidays. Company Description70 Year Old - Locally owned company. Employees stay employed here for years. Paramount, Ca. 90723 (562) 630-795070 Year Old - Locally owned company. Employees stay employed here for years.\r\n Paramount, Ca. 90723 (562) 630-7950

Job Description SUMMARY Without the strength of our Engineering / Program Mgt. team, we would not be able to offer the industry-leading service we’re known for. We’re seeking an experienced Master Scheduler Professional. The ideal candidate will have proven industry experience as a Master Scheduler. As a strong communicator and skilled hands-on Master Scheduler, you will coordinate schedules and inventories to ensure efficient and effective operation of the assigned department or facility. ABOUT US KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California, 1 location in Mukilteo, Washington and 1 location in Wilsonville, Oregon. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBILITIES: • Serves as a primary point of contact for and liaison with sales, logistics, and manufacturing departments., • Collaborate with these departments to establish SIOP Demand & Capacity plans, schedules and frozen operations plans that allocate available resources to best serve our customer needs., • Periodically compares current and anticipated orders with available inventory of raw materials; uses judgment to anticipate demand for and to acquire additional supplies as needed., • Negotiates with outside supply vendors; ensures accurate and timely delivery of orders., • Integrates sales orders with master schedule; coordinates availability of raw materials, supplies, equipment, and staff as needed to meet delivery dates., • Maintains master distribution schedule for the assigned facility; revises as needed and alerts appropriate staff of schedule changes or delays., • Participate in periodic forecasting meetings with sales, marketing, and other related departments; leads additional planning meetings with sales, production, shipping, purchasing, and customer service staff., • Performs other related duties, as required. REQUIRED RESPONSIBILITIES: • Excellent communication and interpersonal skills., • Excellent organizational skills and attention to detail., • Thorough understanding of the business and supply chain., • Strong analytical and problem-solving skills., • Bachelor’s degree in a related field required., • At least five years of related experience required., • Professional certification by the American Production and Inventory Control Society (APICS) preferred.Ability to read, speak and write in English.PHYSICAL REQUIREMENTS:, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift 15 pounds at times. As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. WORK ENVIRONMENT: • This position operates in a warehouse/shop/manufacturing environment. TRAVEL REQUIREMENTS: • 10-15 % travel is required for this position. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Equal Opportunity Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. OTHER REQUIREMENTS: • U.S. citizenship required

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Avionics Manufacturing Specialist Castelion is looking for an Avionics Manufacturing Specialist, reporting to the Lead Manufacturing Engineer of Avionics, to support the development and production of systems required for long-range hypersonic strike vehicles. This will be a full-time, exempt position located in our Torrance, California facility. As an Avionics Manufacturing Specialist, you will work closely with engineering and manufacturing teams to execute highly technical electrical builds, while owning critical aspects of tooling, process development, work instruction creation, and test infrastructure. Responsibilities • Work with avionics engineering by rapidly iterating electronic components and cables, • Construct wire harnesses, perform PCBA rework, assemble and test racks/systems, electro-mechanical units, and test equipment, • Own the development, maintenance, and continuous improvement of manufacturing tooling, • Create, document, and maintain detailed work instructions to ensure repeatable, high-quality builds, • Drive process improvements focused on efficiency, repeatability, and first-pass yield, • Own portions of test infrastructure, including setup, documentation, and continuous improvement of test processes and equipment, • Create and document testing systems and cable diagrams according to engineer-selected testing gear, • Collaborate closely with engineering to transform concepts into manufacturable solutions, • Monitor work progress against standards and deliver on schedule, • Interpret and execute work from drawings, procedures, and regulated documentation, • Understand complex cable harnesses, wiring diagrams, and GD&T, • Verify flight hardware and document results, • Support transition from development builds into initial production, • 5+ years of avionics technician or manufacturing experience, • Experience reading PCBA schematics and executing rework, • Capability to rework 0201 SMD and BGA components in tight spaces, • Experience reading wiring harness drawings and building flight or lab hardware, • Knowledge of industry standards such as IPC-610 and IPC-620, • Proficient with test equipment such as multimeters, oscilloscopes, and signal generators, • Experience creating clear, effective work instructions for manufacturing or assembly processes, • Experience improving manufacturing or assembly processes (yield, efficiency, or repeatability), • Experience owning or supporting electrical or avionics test processes and infrastructure, • Experience in a research and development environment, • Previous involvement in a high-speed production environment, handling flight hardware, • Prior involvement in a high-output environment, involving hands-on experience in constructing cables, electro-mechanical devices, or building prototypes, • Ability to acclimate to frequently changing assignments and a fast-paced working environment, • Excellent communication skills, both written and oral, along with effective teamwork abilities, • Superb focus and attention to detail, with remarkable work efficiency and accuracy, • Experience with soldering PCBAs, including soldering in tight spaces such as 0402 packages and high-density ICs, installing jumpers, and performing dead-bugging, • Expertise in manufacturing and repairing intricate testing systems, • Familiarity with Atlassian tools such as SVN, Confluence, and JIRA, • Basic comprehension of electronic principles and theory, • Must be willing to work extended hours and/or weekends as needed, • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job DescriptionDescriptionAs a Test Technician, you will perform a wide range of spacecraft component and assembly testing while developing and maintaining state-of-the-art test equipment. You will work closely with engineering to improve overall test processes across the company. Responsibilities • Work closely with test engineers to design and implement complex test setups for development and/or production environments (e.g. integrated systems testing in a thermal vacuum chamber with additional instrumentation for model validation), • Work with test engineers, manufacturing engineers, production technicians to improve production test processes and improve acceptance test flow and automation, • Perform maintenance and calibration activities for environmental and robotic test equipment, • Respond to production related non-conformances and drive to root cause and disposition, • Maintain process planning documents and action feedback when necessary, • Provide training and guidance to other technicians, • Provide training and guidance to engineers regarding practical test setups and instrumentation, • Support the avionics test team's participation when interfacing with related departments (e.g. integrated vehicle testing or propulsion testing) Minimum Qualifications • High school diploma or equivalency certificate, • 4+ years of experience working on electronic or propulsion assemblies and/or test production environment or a bachelor's degree in an engineering field, • Deep knowledge of the safe operation of electrical, power, and data acquisition systems, • Proficient with wiring and electrical systems, • Proficient with fabricating and acquiring parts to build test capabilities from basic requirements with minimal direction from others, • Ability to troubleshoot problems with electrical systems and implement scrappy solutions Preferred Skills and Experience • Associate degree or bachelor’s degree in mechanical, aerospace, or electrical engineering, • 7+ years of demonstrated professional experience providing support for the production and test of highly complex components (e.g. cars, battery systems, valves, actuators), • Experience designing tooling in a hardware development environment, • Capable of solving complex problems with little to no supervision on schedule as an individual or as a member of an integrated team, • Ability to use CAD tools to design 3D printable and/or sheet metal fixtures, • Familiarity with RF test equipment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Job Title: Structural Technician PAY: Up to $40/hr depending on experience Job Description The Structural Technician drills precision holes, assembles aerospace structural hardware, and performs high-accuracy inspections to ensure components meet strict aerospace tolerances. This role works with aluminum structures, structural adhesives, fasteners, and sealants in a warehouse-based aerospace environment, using specialized tools and fixtures to deliver high-quality, flight-ready hardware. Responsibilities • Drill precision holes on flight hardware using appropriate drill motors, drill sizes, and drilling methods, including pneumatic drilling, while maintaining tight tolerances., • Select and set up the correct tooling, jigs, egg cups, and fixtures to support accurate drilling and assembly operations., • Assemble structural hardware using structural adhesives, ensuring proper surface preparation and bond prepping for reliable joints., • Install and properly torque fasteners, including rivets, hiloks, inserts, and other structural fastening systems, using calibrated torque wrenches and torque tools., • Perform mechanical assembly of structural components and mechanisms, following detailed work instructions and aerospace specifications., • Carry out in-process inspections using hand measurement tools such as micrometers, calipers, and pin gauges to verify dimensions and tolerances to within thousandths of an inch (±0.001)., • Perform blending and deburr operations on drilled or machined edges using appropriate hand or power tools to remove burrs and sharp edges., • Apply protective treatments such as alodine and sealants to prepared surfaces and completed assemblies to prevent corrosion and ensure long-term durability., • Work with aluminum structural components, ensuring proper handling, alignment, and protection of aerospace hardware throughout the build process., • Follow 5S practices to maintain an organized, clean, and safe work area within the aerospace warehouse environment., • Operate material handling equipment such as forklifts, when qualified, to move parts, assemblies, and tooling safely., • Hands-on experience working with structural components in an aerospace or closely related mechanical assembly environment., • Proficiency in drilling operations, including pneumatic drilling, with the ability to select proper drill motors, drill sizes, and techniques for precision hole making., • Demonstrated ability to hold precision tolerances to within thousandths of an inch (±0.001) on drilled holes and assembled features., • Experience working with aluminum structural components, including proper handling and preparation for drilling, bonding, and fastening., • Proficiency using torque wrenches and torque tools to correctly torque fasteners according to specifications., • Experience installing structural fasteners such as rivets, hiloks, inserts, and other mechanical fastening systems., • Ability to perform mechanical assembly using structural adhesives, including proper bond prepping and adhesive application., • Competence in using measurement tools such as micrometers, calipers, and pin gauges for in-process inspection and verification of dimensions., • Experience performing deburr and blending operations using hand or power tools while protecting critical surfaces., • Familiarity with applying sealants and protective treatments such as alodine to aerospace hardware., • Knowledge and practice of 5S or similar workplace organization and continuous improvement methodologies., • Experience operating forklifts or other material handling equipment in a production or warehouse environment., • Understanding of structural mechanisms and how moving components integrate into larger assemblies., • Comfort working with mechanical, structural, and sealant application processes in a production setting., • Ability to read and follow detailed work instructions, procedures, and technical documentation. You will contribute to innovative aerospace and space-focused projects in a hands-on, technical environment where precision and craftsmanship are highly valued. The organization promotes long-term opportunities, offering the chance to build a stable career while working with advanced structures and technologies. You will join a team-oriented culture that emphasizes continuous improvement, organized work practices, and pride in producing high-quality aerospace hardware. if you are interested feel free to call me at 562 566 4693 or book a virtual meeting at Job Type & Location This is a Contract to Hire position based out of Long Beach, CA. Pay and Benefits The pay range for this position is $18.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescriptionAs a Senior Mission Design Engineer at Impulse Space, your core responsibility will be to design and optimize in-space servicing missions which meet or exceed the requirements of potential customers. This role is part of the Product Management team but will require working closely with multiple teams including the Business Development and Engineering teams. This role will support the Business Development team in proposal development and be responsible for ensuring the mission designs and solutions proposed are technically sound. Some travel to interface directly with customers may be required. Responsibilities • Create mission designs which efficiently accomplish the stated goals of potential customers, • Maintain familiarity with the technical performance capabilities of Impulse’s space vehicles, • Develop tools to efficiently analyze, interpret, and present mission design results, • Assist in the effort of incorporating mission design technical details into written proposals, • Meet with customers to collect requirements and hear feedback regarding proposed mission designs, • Analyze proposed mission designs for effectiveness and identify areas of improvement, • Assist the Engineering team in the effort to continuously improve the spacecraft simulation and trajectory optimization software suite, • Work closely with the Business Development team to understand the needs of each customer and agree on the best approach for each proposal opportunity, • Examples of technical effort the mission design process may include: high-level CONOPs creation, maneuver design and trajectory optimization, requirements compliance verification, CAD fit checks, propellant budgeting, power budgeting, link budgeting, etc. Minimum Qualifications • Bachelor’s degree in a technical field, • 4+ years of experience working in a technical role, • Ability to communicate technical material clearly and professionally, • Working knowledge of orbital mechanics and spacecraft operations, • Functional knowledge of spacecraft systems design and payload accommodations, • Proficient in at least one programming language with a preference for Python Preferred Skills and Experience • Master’s degree in a technical degree area, • Experience in one or more customer-facing roles, • Experience assembling spacecraft, overseeing the assembly of spacecraft, or integrating payloads onto spacecraft, • Experience operating spacecraft on orbit, • General familiarity with the space industry, • Demonstrated ability to operate in a startup environment, • Experience operating CAD software Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description SUMMARY: We are seeking an experienced 5 axis CNC Machinist, 2nd Shift for our South El Monte, CA location. Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be able to explain the respective role within the QMS and how their role contributes to quality. The CNC machinist shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California and 1 location in Mukilteo, Washington. Location: South El Monte, CA Compensation & Benefits: • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* RESPONSIBILITY & AUTHORITY: • Maintain and Realize AS 9100 procedures and continuous improvement efforts., • Maintain a clean and organized work environment., • Keep the CNC clean and general maintenance up to date., • Keep machine fixtures clean and stored properly., • Work with Management to prioritize machine schedule., • Work with programmers in order to minimize set-up and manufacture time., • Order cutters and tooling as required to support manufacturing., • Operate the CNC., • Report to Management recommendations and / or concerns that will affect quality or time management., • Must understand how customer products are impacted in the event of failure., • Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management., • Must have experience with Siemens 840D and Fanuc 31i – B5 Controls., • Must have excellent blueprint interpretation skills., • Must have thorough understanding of machine set-ups, tooling, and cutters., • Must have direct communication with internal customers., • Must be trained of applicable changes & customer requirements., • High school graduate or equivalent work experience., • Adequate years of operating CNC equipment determined by Karman.PHYSICAL REQUIREMENTS:, • Constant standing/walking/sitting for at least 8 hours., • Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs., • Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment., • Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement., • Prolonged periods of repetitive movement are required., • Constant holding, grasping, turning, or otherwise working with the hand(s)., • Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. WORK ENVIRONMENT: ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Night Shift: Monday - Friday | 5pm to 5am

Job DescriptionSenior Design Engineer Location: Los Angeles, CA Compensation: $155,000 – $175,000 (Depending on experience) About the Role SprintRay’s Hardware R&D Project team develops production-ready hardware that dental professionals can rely on. Through a deeply hands-on engineering approach, we transform advanced innovation into robust, manufacturable products that perform consistently in clinical environments. As a Design Engineer, you support the development of hardware programs by contributing to mechanical design, prototyping, testing, and documentation under the guidance of senior engineers. You work hands-on across the product development lifecycle, helping turn new concepts into validated, production-capable designs. This role is ideal for an early-career engineer looking to deepen their technical skills while gaining exposure to full product development in a fast-paced, collaborative environment. Key Responsibilities * Own mechanical design and development of major hardware products from concept through production and sustaining. * Lead technical trade studies, architecture decisions, and risk mitigation related to performance, reliability, cost, and schedule. * Drive detailed CAD design, tolerance analysis, and GD&T for assigned systems. * Design, build, and validate rapid and high-fidelity prototypes to de-risk designs early. * Apply Design for Manufacture and Assembly (DFMA) principles to ensure scalable, high-yield production. * Plan and execute experiments and validation testing using structured, data-driven methodologies. * Define critical-to-quality (CTQ) requirements and acceptance criteria to support mass production. * Develop fixtures, jigs, and test equipment to support characterization, validation, and manufacturing readiness. * Create and maintain high-quality engineering documentation including CAD models, drawings, test reports, and specifications. * Collaborate cross-functionally with Research, Electrical, Firmware, Manufacturing, Quality, Operations, and Supply Chain teams. * Mentor junior engineers and contribute to design reviews, best practices, and continuous improvement. * Support production issues, failure analysis, and post-launch design improvements. Required Qualifications * 6–9 years of mechanical engineering or product development experience delivering complex hardware products to production. * Bachelor’s degree in Mechanical Engineering or related field (Master’s preferred). * Strong hands-on experience with prototyping, mechanical assembly, and iterative design. * Advanced proficiency in CAD (SolidWorks preferred). * Strong experience creating and reviewing GD&T-compliant drawings and tolerance analyses. * Demonstrated experience with experiment design, validation testing, and data analysis. * Experience with electro-mechanical systems integration. * Solid understanding of manufacturing processes (machining, sheet metal, injection molding, additive manufacturing). * Experience in regulated or quality-driven environments (medical, dental, or similar) is a plus. * Strong communication skills and ability to influence technical outcomes across teams. Employment Type Full-time, Onsite About SprintRay SprintRay is rewriting the rules of dentistry with technology that’s smart, fast, and designed to make life easier for dental professionals. Since 2014, we’ve been on a mission to deliver the most advanced 3D printing solutions in the industry—combining hardware, software, and materials into one seamless ecosystem. But what really makes SprintRay different is our people. We’re a bold, global team of innovators, problem-solvers, and doers who thrive on pushing boundaries and challenging the status quo. Every product we create is driven by a simple goal: help dentists spend less time on repetitive tasks and more time changing patients’ lives. Our culture is entrepreneurial, collaborative, and fueled by curiosity. We celebrate diverse perspectives and believe the best ideas can come from anywhere. Whether we’re building next-generation AI tools, designing new materials, or supporting our customers on the front lines, we’re united by the same passion—transforming digital dentistry and having fun while we do it. At SprintRay, the future of dentistry is being printed today. Want to be part of it? Equal Opportunity Employer SprintRay is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. To All Recruitment Agencies: Without a written agreement signed by an officer of SprintRay: a) SprintRay does not accept resumes from recruiting agencies, headhunters, or any other party expecting payment in the event SprintRay speaks with or hires a candidate from such submitted resume; b) SprintRay is not responsible for any fees related to unsolicited resumes or related Terms of Service, and c) Unsolicited resumes received will be considered the property of SprintRay and will be processed accordingly. Accessibility If you need a reasonable accommodation during the application or interview process, please contact us at .

Job DescriptionLong Wall Company was created in 2024 to accelerate missile defense technology for the U.S. and our allies. Building on the RS1 and GS0 launch systems, Long Wall develops containerized, mass-producible missile defense systems and offers rapid, low-cost flight testing. We believe that the future of global security and stability require defensive technology that is lower cost, higher performing, better tested, and more broadly distributed than is possible today. Join us. What we look forMission-Driven Problem Solvers. The aerospace frontier demands ingenuity. We want Team members who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission. Total Ownership. We seek staff and engineers who take full responsibility for contributing to and delivering flight-ready work while recognizing that no one succeeds alone. The best engineers, corporate professionals, and technicians make their teammates better. Knowing that complementary skills create force multiplication and drive mission success. SR. AVIONICS DEVELOPMENT TECHNICIANWe are looking for an experienced avionics technician (S4 or S5) who is excited about manufacturing development and production hardware for launch vehicles and defense systems. We seek team members who can think critically to improve hardware designs and manufacturing processes, and deliver high-quality hardware to our programs. Avionics technicians build and test components and electrical assemblies for our launch vehicles and defense systems. Avionics technicians are responsible for a broad range of responsibilities, including PCB assembly and rework, electro-mechanical assemblies, sensors/transducers, cable and wire harnessing, final integration, operating thermal chambers, functional testing, and performing software-driven tests.RESPONSIBILITIES: • Assemble PCBs into product chassis and support final vehicle integration by installing electrical sub-assemblies and routing cables and harnesses, • Assemble electro-mechanical components along with the building of circuit boards and small electrical assemblies, • Fabricate high quality, high reliability cable and wire harnesses, • Operate complex automated equipment, including routine inspection, maintenance, and troubleshooting, • Document anomalies and non-conformities and associated rework to quickly return non-conforming product back into normal workflow, • Perform functional testing of built hardware, including setups, instrumentation, test execution, create/upload reports, and teardown, • Ensure lab equipment, tooling and consumables available and maintained to a high standard, • Work closely with manufacturing and test engineers to provide input and develop assembly processes and test procedures, • Assist with the development of production processes for first time production, • Instruct and mentor junior avionics techniciansBASIC QUALIFICATIONS:, • High School Diploma/GED or Equivalent, • Minimum 5+ years of relevant hands-on technician work experience in aerospace, aviation, military, telecommunications or similar industries. Including demonstrable working knowledge of, but not limited to: PCB, cable harness fabrication, electro-mechanical, mechanical, integration assemblies, and prototype developmentPREFERRED SKILLS AND EXPERIENCES:, • Ability to perform assembly operations including bending, crimping, grasping, pulling, reflowing, sitting, soldering, standing, stooping, stretching, stripping, and torquing, • Proficient usage of a PC; experience with Microsoft Windows, Microsoft Office Suite (Excel, Outlook, Power Point, Word), shop floor management software (ERP) and related programs, • Strong written and verbal communication, and organizational skills, and high level of attention to detail, • Ability to read/interpret and work from controlled technical documentation and processes such as engineering drawings, layout drawings, mechanical drawings, assembly procedures, manufacturing instructions, schematics, and parts lists, • Skills in operating and manipulating automated machinery and various mechanical and electronic hand and power tools requiring manual dexterity with minimal instruction, • Strong emphasis on safety, cleanliness, adherence to corporate policies and standards, a great attitude, and the ability to effectively work with a team, • Ability to rapidly change roles/responsibilities while working in a high-paced, challenging flight production clean room environment, • 1+ years of experience working at a rocket launch facility and supporting launch campaigns, • Associate Degree in electrical discipline., • Manufacture and soldering of electronic components to NASA workmanship standards using IPC-J-STD-001 and/or IPC-A-610 standards, • Manufacture electrical cable and harnesses to IPC-A-620 standard, • Current or past certification for NASA-STD-8739.4, NASA-STD-8739.6, IPC-A-610, IPC-A-620, IPC-J-STD-001 or equivalent, • Knowledge of ANSI S20.20 Electrostatic Discharge (ESD) standard and 5S methodologiesGENERAL REQUIREMENTS:, • Ability to climb up and down ladders to work at elevated levels, • Work occasionally performed in an environment requiring exposure to fumes, odors, and noise, • Must be willing to work 50+ hours a week (overtime), including weekends when necessary to support launch and critical project timelines, flexibility required, • Must be willing to travel to other Long Wall sites or customer facilities as necessary, • Ability to sit or stand for extended periods of time, • Ability to use a computer to complete assignments, • Ability to communicate with individuals and groups in person, by phone and telepresence, • Ability to pick up, lift, and push up to 50lbs, • Heavily employer-subsidized medical, dental, and vision insurance plans, • Long Wall paid life insurance and LTD coverage, • 4% 401k match, • Student loan repayment assistance program, • Paid parental leave, • Family planning assistance program, • Long Wall paid financial wellness program, • Paid time off for non-exempt employees and a flexible vacation policy for exempt employeesITAR RequirementThis position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position. Equal Opportunity EmployerWe are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Job Description Key Position Responsibilities: The duties and responsibilities include, but are not limited to the following: • Reads and understands packing, marking and shipping instructions., • Prepare and process shipping documents, including bills of lading, packing lists, and shipping labels., • Coordinate with carriers and schedule pickups and deliveries., • Inspect packaging and verify outgoing shipments to ensure accuracy and quality., • Maintain accurate records of shipments, including tracking information and delivery confirmations., • Communicate with the warehouse team to ensure timely and efficient order fulfillment., • Resolve any shipping-related issues or discrepancies in a timely manner., • Assist in receiving product from vendors and scanning and organizing documentation in preparation for inspection, • Assist in inventory management and stock control (Cycle Counts)., • Ensure compliance with all shipping regulations and company policies., • Assist with packaging and preparing outgoing work for vendor processing, • Work with the Assembly and Vibro Departments as needed, • Be available for overtime and extended weekend hours as needed for month end closings. Essential Qualifications, Skills, and Experience: • Minimum 2 to 3 years' experience in a manufacturing environment., • High School Diploma or equivalent., • Knowledge of commonly used concepts, practices, and procedures within the field., • Strong organizational skills, self-starter with initiative and ability to work with minimum supervision, • Must be computer literate. Working knowledge of Word and Excel. Intermediate or advanced knowledge a plus., • Basic math skills required., • Ability to fluently read, work and follow instructions in English., • Possess a Class C, California Driver’s License., • Maintain good driver safety record. (Must provide DMV record annually)., • Require forklift certification. -Maintain superior teamwork, effort and attitude -Attention to detail, pay specific attention to tasks Beneficial Qualifications, Skills, and Experience: • Good communication skills., • Good numerical and reasoning ability, • Ability to organize tasks and work with others ITAR Requirement: • Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained. Quality Requirement: • Employees will participate as required in understanding, implementing and maintaining the Company Quality Policy in accordance with AS-9100C and/or ISO-9001:2008 requirements. Physical Requirements/Working Conditions: • Position works around machinery and equipment. The employee is expected to access, enter, and retrieve data by using a computer terminal. This position requires employee to stand for 8 hours. The position requires employee to drive a delivery vehicle. The position requires lifting parts up to 40 lbs. unassisted. The employee must often bend and reach to load, unload, or stack materials on equipment, in delivery truck or van. The employee also moves throughout the building to collect, deliver and handle production parts. Employer’s Statement: • This job description does not list all of the duties of the job. You may be asked by supervisors or managers to perform other duties. You will be evaluated in part based upon your performance of the tasks listed in this job description., • The company reserves the right to change, rescind, add or delete the duties and responsibilities of positions within this job classification at any time. The job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason. We offer competitive compensation and excellent benefits including Medical, Dental, and a company matched 401k plan. Roller Bearing Company of America / Sonic Industries, Inc. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance Schedule: • 8-hour shift, • Night shift, • Overtime Language: • English (Preferred) Ability to Commute: • Torrance, CA 90502 (Required) Ability to Relocate: • Torrance, CA 90502: Relocate after starting work (Required) Work Location: In person

Job Description Video Test Engineer Broadata Communications, Inc. (BCI) – Torrance, CA On-site Company Overview Broadata Communications, Inc. (BCI) is a privately held California-based corporation. BCI is a leading and innovative company specializing in the development of market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients are world leaders in their industries, spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. We are ISO 13485 and ISO 9001 certified, with a strong commitment to quality, innovation, and continuous improvement. Summary We are seeking a detail-oriented, Video Test Engineer. This role focuses on performing integration testing, validation and verification of new and existing products, while developing and maintaining the company’s processes, specifications, and procedures for product development, troubleshooting, and testing. This is a hands-on role in Product Development and Engineering, based in Torrance, CA, and is not a remote or hybrid position. We offer a fast-paced, high impact and stimulating environment with opportunities for professional growth within BCI. Veterans welcome! Key Responsibilities • Develop verification, validation, troubleshooting, and testing for the release and maintenance of BCI and third-party hardware, firmware and software used in high-performance digital multimedia products., • Design, develop and execute product and system test plans to create formal validation and verification, documentation, methods, and processes, design and build fixtures, automated test jigs, scripts, and demo and test systems., • Develop and perform formal validation and verification testing, including interoperability, safety, environmental, accelerated life cycle testing, pursuant to compliance certification to 60601., • Document and analyze test results, including product hardware, firmware, & software verification and validation, using both manual and automated testing as needed., • Conduct product failure resolution by analyzing failure reports, devising, and executing experiments to reproduce one or more failure modes, and systematically localizing root cause(s)., • Generate and review accurate and thorough technical content, including software/firmware requirements, design specifications, and test protocols., • Generate internal and external documentation such as datasheets, user manuals, test methods and processes, etc., • Contribute input to schedules and task breakdowns., • Contribute to organization of common and dedicated lab work benches, storage, mechanical tools, 3D printers, and electronics tools and supplies.Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management. Education and Experience • B.S. in Electrical Engineering or a related field., • 3+ years of experience designing and/or testing of multimedia hardware and systems., • Basic electrical circuit and mechanical design knowledge sufficient for design of test fixtures including basic wiring and computer interfacing., • Experience executing test plans to create formal validation and verification documentation for multimedia hardware, firmware & software products., • Hands-on, demonstrable experience and working knowledge of most or all of the following:, • Experience with printed circuit board assembly and testing, cable harness production, and ESD control., • Multimedia test equipment such as Quantum Data, Audio Precision, PHABRIX, • Standard lab equipment such as oscilloscopes, logic analyzers, signal analyzers, signal generators, spectrum analyzers, etc., • Basic Python to understand and modify complex scripts and write simple scripts, • Experience with bug scrubbing, bug tracking, and bug tracking software, • Building test units, harnesses, and jigs using mechanical and electronic assembly, • Multidisciplinary bring-up and debugging techniques and approaches, • PC (Windows/Linux) and Ethernet network/ IP network setup and configuration, • High speed video interfaces and protocols (composite to 4K60, HDMI/DP/DVI, SDI, SDVOE, streaming, color spaces, standards and temperatures, and timing & synchronization)Skills & Abilities, • Solid Electrical Engineering background with the ability to read, understand, create, and edit multimedia PCB schematics, familiarity with basic FPGA/SoC/processors, memory systems, power subsystems including linear and switching topologies, and serial interfaces., • Strong team player who can work collaboratively with a diverse team to identify root cause of complex system problems, for both internally reported failures as well as customer RMAs, using Ishikawa/fishbone analysis to find effective, practical solutions quickly., • Detail-oriented effective communicator with excellent customer-ready documentation and communication skills and ability to develop, use, and socialize document templates to streamline processes., • Ability to provide completion time estimates for a given set of test requirements., • Ability to be hands-on with soldering, assembly, and testing., • Ability to work with very little supervision, prioritize between multiple tasks, meet aggressive deadlines, and work extended hours (as needed)., • Highly responsible and committed to thrive in an energetic, fast-paced, evolving, high growth environment while adhering to aggressive deadlines, and coordinating cross-functional teams., • Strong self-motivation and attitude for personal career growth, willingness to self-learn, and work in new technology domains.Compensation & Benefits, • Base Salary: $80,000 - $120,000 (depending on experience and qualifications), • Medical, vision and dental insurance, • 401(k) with company match (100% of the first 4% in eligible compensation), • Flexible Spending Account, • 2 weeks paid vacation, • 1 week sick pay, • 10 company holidays aHOCcuPbCi

Job Description Radiant is an El Segundo, CA–based clean energy startup developing the world’s first portable, zero-emissions nuclear microreactor. Our Kaleidos 1MW system is designed to replace diesel generators in remote and mission-critical environments. Radiant plans to test its development reactor by 2026, aiming to be the first new commercial reactor design to achieve a fueled test in over 50 years. As Radiant scales toward commercialization, strong enterprise systems are critical to execution, compliance, and cost discipline. Role: Operations Planner Radiant is seeking an Operations Planner responsible for the resource management, production scheduling, and forecasting and planning to ensure production build plans, procurement activities, and operational deliverables align with and meet company milestones. This role focuses on ensuring the availability of material, equipment, and manpower to support internal and external production activities, aligning these activities with build schedules, and coordinating material movement through internal work centers. The Production Planner will work closely with supply chain, warehouse, quality, engineering, and internal manufacturing teams to ensure material and internal fabrication readiness and outside processing activities are coordinated to support build execution. The ideal candidate is highly detail-oriented, proactive, and capable of coordinating cross-functional teams to solve operational problems quickly. Responsibilities And Duties: Production Planning * Work with manufacturing engineering to maintain daily, weekly, and monthly build plans based on milestones, hardware availability, and internal capacity. * Analyze demand forecasts, capacity, and material availability to generate predicted throughput and monitor supporting activity completion. * Develop and maintain production schedules for manufacturing work centers. Sequence jobs to maximize throughput and minimize changeovers. Material Availability Management * Work with supply chain and engineering to ensure accurate demand forecasts, material readiness, and build plan completeness. * Maintain visibility of build readiness status and escalate risks that could impact build schedules. Monitor inventory levels and system availability to ensure materials are available for production builds. * Work with quality teams to prioritize inspection runs and activities needed to release material needed for production. Internal Production & Outside Processing Coordination * Coordinate and track internal production activities required to support production builds. * Monitor progress of internally fabricated components and ensure machining operations align with production priorities. * Manage and track outside processing (OSP) activities including heat treatment, plating, coatings, specialty machining, cleaning, welding, inspection, and other vendor-based processing steps. * Ensure materials requiring outside processing are scheduled, shipped, tracked, and returned in alignment with build schedules. * Work with manufacturing and supply chain teams to resolve delays or capacity constraints affecting internal or external production steps. * Coordinate with internal manufacturing teams when subassemblies must be built to meet higher level assembly targets. Data Integrity & Process Improvement * Maintain and refine production, piece part, and assembly data to maintain accurate forecasting. * Investigate part number mismatches, BOM discrepancies, or inventory data issues. * Track actual production vs planned schedule to identify adherence discrepancies. * Improve processes related to production forecasting, planning, and production throughput. * Develop dashboards or tracking tools to improve visibility into production material readiness. Required Qualifications And Skills * Bachelor’s degree in Supply Chain, Operations, Engineering, Business, or related field. * 2+ years of experience in production planning, materials planning, manufacturing coordination, or supply chain operations. * Strong understanding of BOM structures, inventory management, and production material flow. * Experience working with ERP/MRP systems for production planning and inventory management. * Strong analytical and problem-solving skills with the ability to identify root causes of material availability issues. * Excellent cross-functional communication and coordination skills. Desired Qualifications And Skills * Experience working with machine shops, fabrication operations, or manufacturing environments. * Familiarity with outside processing (OSP) workflows such as heat treatment, coatings, inspection or specialty finishing. * Experience supporting production kitting or manufacturing build readiness. * Familiarity with quality inspection processes, MRB workflows, or manufacturing run closures. * Experience improving operational processes in fast-moving production environments. Additional Requirements * Must be willing to work extended hours and weekends as necessary to accomplish our mission. * Must work 100% onsite at El Segundo HQ. Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $115K - $168K

Job Description We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. Location: Long Beach, CA As our Design and Release Engineer, Glazing will be responsible for the end‑to‑end development of vehicle components and systems, from concept through production release. This role requires strong 3D design capability, deep understanding of engineering requirements, and the ability to collaborate across cross‑functional teams to deliver high‑quality, manufacturable, and cost‑effective solutions. Key Responsibilities CAD & Technical Design • Create and develop components using 3DX CAD with the ability to design parts independently., • Apply GD&T principles and perform dimensional variation analysis to ensure robust designs., • Design to meet Voice of Customer, regulatory, functional, quality, DFA (Design for Assembly), DFS (Design for Service), packaging, and clearance requirements., • Assess tooling, manufacturing, supplier sub‑assembly, and vehicle assembly feasibility., • Evaluate surface feasibility, fit & finish, and craftsmanship considerations when applicable., • Maintain comprehensive design documentation and quality history., • Utilize PLM systems (including BOM management) to control design data and release processes., • Manage engineering timing to support prototype builds, validation phases, and overall program milestones., • Oversee development expenses including prototype parts, tooling, and other engineering-related costs. Salary: • $115,000-135,000 Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Job Description We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. As a Low Voltage Component Engineer, you'll use your technical expertise to wholistically drive complex problems to completion. You'll work amongst the team to scope work, plan requirements, identify risks, estimate budgets, and clearly communicate ongoing progress. You'll work side by side with engineers on a daily basis; your technical expertise, insight and know-how will drive the team forward. What you'll be able to do: • Execute the end-to-end release actions for various electronic components within the Product Lifecycle Management system (3DX), • Drive engineering teams towards containment and resolution of issues raised from design reviews, virtual builds, and build events to protect the program's schedule to start of production (SOP) and ongoing production, • Manage open issues list for internal and external projects, driving team to close items on time and at a high level of quality., • Maintain supplier relationships in collaboration with Supply Chain team to ensure timely deliveries for build events, • Support key decisions working cross-functionally across engineering, finance, and strategy to reach the right conclusions, • Effectively present information to technical or non-technical audiences ranging from team level meetings through to Executive briefs and updates, • Anticipate and manage platform risks, perform trade-offs and identify contingency plan(s) or alternate approaches to mitigate risks and provide strong leadership to team in circumstances where there may be uncertainty or ambiguity, • Collaborate with engineers, designers, technicians, and suppliers to design, procure and build physical test assets. The minimum requirements we seek: • Bachelor's degree in Mechanical Engineering, Computer Science, or related field, • 5+ years of experience in an engineering setting involving complex systems development, • Detailed knowledge of product development process from design, development, validation and integration, • Proven experience driving progress on multiple projects across multiple locations and timelines, • Strong written and verbal communication skills, • Expertise with Jira and Confluence for project management, • Experience with JAMA for requirements documentation, • Experience with project management tools such as Smartsheet or MS Project, • Experience designing and releasing mechanical and electromechanical systems, • Master's degree in engineering or business administration, • Experience in leading product development from concept to deployment, • Experience launching a product from concept through production, preferably in automotive, • Strong written and verbal communication skills, • An eagerness to work cross-functionally in a dynamic environment where you are part of a high performing team, • A systems approach to design and development with the desire and curiosity to strive for exceptional delivery execution and continuous improvement, • An ability to craft clear, compelling recommendations supported by strong analysis and business logic, and articulate them to the organization to gain support for recommendations. Salary Range: $120,000-$145,000/K The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Job Description SUMMARY The Sr. Manufacturing Engineer supports production with emphasis of design producibility, manufacturing process development and support, and oversees the transition of product to production including follow on support. The manufacturing engineering role is pivotal in developing methods of manufacture, work instructions and production line operations to ensure product quality is built into the final product. The Manufacturing Engineer position is focused at supporting engineering and manufacturing activity while continuing to build essential skills and experience. ABOUT US KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California, 1 location in Mukilteo, Washington and 1 location in Wilsonville, Oregon. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBILITIES: • Supports programs, products and engineering activities such as DFM, • Validates and monitors fabrication and production process and controls, • Designs, develops and implements all forms of fixtures, tools, and inspection gages to facilitate fabrication and assembly, • Generates, tracks and maintains bill of materials for assemblies, methods of manufacture and work/build instructions, • Instrumental in material and resource planning and coordinating with the Product team to ensure schedules are kept, • Reviews and modifies processes for improved flow and cost reduction throughout the company, • Assists with planning manufacturing workflow and space requirements, • Solves technical problems utilizing technical reference materials and various inspection tools and techniques, • May support prototype builds and evaluations of materials and processes REQUIRED RESPONSIBILITIES: • Excellent communication and interpersonal skills., • Strong analytical and problem-solving skills., • Strong mechanical aptitude required, hands-on engineering experience in a fabrication and assembly shop environment is desired, • Ability to read blueprints, drawings, and technical diagrams, • Familiarity with basic material properties, in process verification and validation, • Proficient with production planning / ERP systems, such as Epicor., • Must be a U.S. Citizen EDUCATION & EXPERIENCE: • Bachelor’s degree in a related field required., • At least five years of related experience required., • Professional certification by the American Production and Inventory Control Society (APICS) preferred., • Ability to read, speak and write in English. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. WORK ENVIRONMENT: • This position operates in a warehouse/shop/manufacturing environment. TRAVEL REQUIREMENTS: • 10-15 % travel is required for this position. Equal Opportunity Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. OTHER REQUIREMENTS: • U.S. citizenship required

Job Description We’re looking for a Structural Analyst, Turbomachinery to take ownership of the structural, thermal, and mechanical performance of high-speed rotating machinery, including compressors, turbines, and pumps in our power generation and primary cooling systems. You’ll work hand-in-hand with mechanical designers, build engineers, and test teams to ensure hardware performs as expected under extreme mechanical and thermal loads. You’ll contribute to trade studies, iterative design, prototype builds, simulations, and testing, making a tangible impact on Radiant’s mission. Responsibilities * Perform structural and thermal analyses of turbomachinery components and assemblies (i.e. compressors, turbines, rotors, electric motors, bearings, seals, and housings) to guide design decisions and ensure reliability under operational and transient conditions * Evaluate static and dynamic mechanical performance, thermal stresses, and coupled thermal-structural effects * Conduct fatigue, durability, and rotor-bearing performance analyses for high-speed rotating systems * Support analysis of airflow, heat transfer, and temperature distributions within turbomachinery components as part of thermal and structural evaluation * Troubleshoot and investigate complex interactions between mechanical, thermal, and rotor system behavior * Collaborate with mechanical design, build, and test teams to optimize component designs, assembly processes, and thermal management strategies * Support prototype and first-article testing, including test article integration, instrumentation setup, data collection, and analysis * Document technical results, communicate findings, and provide actionable guidance to cross-functional teams Required Skills and Qualifications * B.S. in Mechanical, Aerospace, or Structural Engineering, or a related STEM field * 3–5 years of relevant experience performing structural, thermal, or turbomachinery analysis * Strong foundation in classical mechanics, stress analysis, and heat transfer principles * Hands-on experience with finite element analysis (ANSYS, Abaqus, or equivalent) for structural and thermal simulations * Familiarity with airflow, temperature distributions, and coupled thermal-structural evaluations within rotating machinery * Strong problem-solving, communication, and documentation skills Desired Skills and Qualifications * M.S. in Mechanical, Aerospace, or Structural Engineering * Experience with rotor dynamics, critical speed assessment, and vibration/stability evaluations * Hands-on experience with high-temperature materials, thermal stress, and high-speed bearing design * Prior experience in energy, power generation, or regulated industries (nuclear, aerospace) * Knowledge of industry standards (API, ASME, ISO) * Prior hands-on experience with assembly, rotor stacking, or prototype hardware is a plus Additional Requirements * Must be willing to work extended hours and weekends as necessary to accomplish program objectives * Must work 100% onsite at Radiant’s El Segundo headquarters Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $124,500 - $172,725

Job Description Are you passionate about design and fascinated by crafting top-tier custom industrial machinery and automation systems? Join our team of engineers dedicated to delivering excellence to our esteemed clientele! Responsibilities: • Develop intricate part and assembly models using SolidWorks 3D CAD, • Design components to meet manufacturing specifications, including sheet plastic routing, fusion welding, sheet metal bending, waterjet cutting, CNC machining, and more, • Create and refine production engineering drawings (assemblies, components, layouts) ensuring timely delivery within budget, • Collaborate closely with production teams, aligning designs with fabrication and assembly processes for efficient manufacturing, • Generate and manage bills of materials for mechanical assemblies, • Maintain meticulous organization of CAD files using SolidWorks Product Data Management system for file storage, revisions, and lifecycle management, • Actively engage in Design Reviews to optimize design concepts, • Conduct thorough checks on drawings prepared by Engineers and other Designers to ensure compliance with design standards and best practices Requirements Qualifications: • CAD certification or a two-year technical AA degree, • 5 years of work experience, • Proficiency in SolidWorks CAD and PDM at an advanced level, • Demonstrated portfolio showcasing strong 3D modeling skills, • Excellent verbal and written communication abilities, • Self-motivated, accountable, and committed to continual improvement, • Proficiency in Plan and Elevation system views using AutoCAD Mechanical, • Experience in piping systems design and Piping and Instrumentation Diagrams (P&IDs), • Administration expertise in Product Data Management systems, • Advanced proficiency in SolidWorks design modules (frames, routing, sheet metal, large assemblies), • Structural analysis familiarity using SolidWorks Simulation FEA, • Understanding of Geometric Dimensioning and Tolerancing as per ANSI Y14.5 Competitive Salary, Medical, Dental, and Vision, 401K, Paid Time Off and Paid Holidays

Job Description SUMMARY Without the strength of our employees, we would not be able to offer the industry-leading service we’re known for. We truly believe in excellent jobs for AMAZING people! In this role, the qualified candidate will perform Laser Inspection in support of product conformance and generate the required inspection data packages. Work with Customer Representatives (source inspectors) in presenting / verifying conformance prior to delivery. Assist manufacturing in verifying assembly. The Laser inspector shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBILITIES · Proficiency of Metrology methods for aerospace industry to ensure quality assurance · Generate inspection reports. · Perform Laser/ mechanical and visual inspection on product utilizing both engineering data and electronic models. · Present product and data packages to Customer source inspectors. · Work with Production to support inspection schedules. · Any other duties as assigned. · Must understand how customer products are impacted in the event of failure KNOWLEDGE & REQUIREMENTS · Must be detail oriented, extremely organized, must possess excellent communication skills. · Must have excellent blue print/ Model interpretation skills. · Must have working knowledge of Customer requirements / specifications. · Must have working knowledge of Master Cam & VERISURF software. · Must have working knowledge of Laser equipment utilizing VERISURF. · Must have working knowledge of Catia modeling software. · Must have direct communication with internal customers. · Must be trained of applicable changes & customer requirements. · Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION & EXPERIENCE • High school graduate or equivalent in work experience., • Three (3) + years' experience in inspecting machine parts and assemblies using including LASER Technology & Practices., • Three (3) + years’ experience using Laser Inspection., • Three (3) + years' experience working with Customer Source Inspectors. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. TRAVEL REQUIREMENTS: No travel required for this position. PHYSICAL REQUIREMENTS: As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. 1st shift

Job DescriptionDescriptionAs a Senior NX Application Engineer at Impulse Space, you will own the administration and optimization of our Siemens NX and Teamcenter ecosystem. In this role, you will be the primary technical expert responsible for the health of our CAD environment. You won't just be managing software; you will be building the infrastructure that allows our propulsion, structures, and avionics teams to collaborate seamlessly. From architecting standard part libraries to troubleshooting complex assembly issues, your work will directly impact the speed at which we can design and fly. Responsibilities • CAD Administration: Manage and optimize Siemens NX configurations, including site defaults, customer defaults, and environment variables to ensure peak performance across the engineering team., • PLM Integration: Administer and support the NX-to-Teamcenter integration, ensuring seamless data flow, revision control, and workspace management., • Part Library Management: Design, build, and maintain comprehensive NX Reuse Libraries and standard part catalogs (fasteners, fittings, electronic components) to drive design standardization and speed., • End-User Support: Serve as the "tier 3" technical expert for the engineering team, resolving complex NX/Teamcenter issues, modeling bottlenecks, and drafting standard operating procedures (SOPs)., • Workflow Optimization: Develop and implement best practices for large assembly management, synchronous modeling, and model-based definition (MBD) to improve design efficiency., • Upgrades & Testing: Lead the testing and deployment of NX and Teamcenter patches and version upgrades, ensuring zero downtime for the production design environment. Minimum Qualifications • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related technical field., • 5+ years of experience in a CAD/PLM administration role, specifically focused on Siemens NX. Preferred Skills and Experience • Demonstrated professional knowledge of Teamcenter (Active Workspace and Rich Client) and its integration with NX., • Demonstrated experience setting up and managing CAD Part Libraries and standard catalogs in a professional aerospace or automotive environment., • Experience with NX Open, C++, or Python for automating repetitive CAD tasks., • Background in Aerospace & Defense manufacturing, with a strong understanding of how CAD data flows into downstream manufacturing and assembly processes., • Familiarity with "Model-Based Enterprise" (MBE) initiatives and Digital Twin concepts., • Strong interpersonal skills with a "customer-service" mindset toward supporting a diverse team of engineers., • Ability to thrive in a rapid-prototype environment where requirements evolve quickly. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description About Radiant Radiant is an El Segundo, CA-based startup building the world’s first mass-produced, portable nuclear microreactors. The company’s first reactor, Kaleidos, is a 1-megawatt, fail-safe microreactor that can be transported anywhere power is needed and run for up to 5 years without refueling. Portable nuclear power with rapid-deploy capability can replace similar-sized diesel generators and provide critical asset support for hospitals, data centers, remote sites, and military bases. Radiant’s unique, practical approach to nuclear development leverages modern software engineering to rapidly deliver safe, factory-built microreactors that use existing, well-qualified materials. Founded in 2020, Radiant is on track to test its first reactor at the Idaho National Laboratory this summer, with initial customer deliveries beginning in 2028. About the role Radiant is seeking a highly motivated early-career Mechanical Engineer to support the design and integration of electrical components and subsystems in a fast-paced startup environment. You’ll work alongside experienced mechanical and electrical engineers to solve challenging problems in packaging, thermal management, structural design, and system integration for advanced hardware. This role offers hands-on exposure to end-to-end hardware development—from CAD and analysis through build, test, and validation—while contributing directly to Radiant’s mission to deploy the first successfully fueled commercial reactor in over 50 years by 2026. Responsibilities & Duties * Support the mechanical design and ownership of electrical components and subsystems, including: * Mechanical design of electrical assemblies such as control panels, enclosures, brackets, mounts, and supports * Cable and wiring harness routing, retention, strain relief, bend radius compliance, and serviceability considerations * Packaging of sensors, actuators, connectors, and electrical hardware within constrained assemblies * 3D CAD modeling and 2D drawing creation using Siemens NX, including tolerance stack-ups and GD&T basics * Perform first-order load calculations (static, shock, vibration) to support structural design decisions * Conduct thermal analysis and heat-transfer assessments for electrical components, enclosures, and assemblies * Support selection of materials, fasteners, and finishes appropriate for electrical, thermal, and environmental requirements * Assist in the design and setup of test fixtures and test stands for acceptance and qualification testing * Participate in system integration, troubleshooting, and validation activities alongside electrical and systems engineers * Collect and interpret technical requirements and provide clear, constructive feedback across mechanical, electrical, software, and systems disciplines * Develop, document, and execute basic test plans and procedures to verify mechanical and thermal performance * Perform trade studies and first-order analyses to evaluate design options and constraints * Generate and maintain design documentation to support Design for Manufacturing (DFM), assembly, and serviceability * Support subassembly design, coordinate with manufacturing, and assist with build and test schedules Required Qualifications & Skills * Bachelor’s degree in Mechanical Engineering or a closely related field from an accredited institution * Hands-on experience with mechanical design through coursework, labs, internships, senior design projects, or engineering clubs * Proficiency or coursework experience using Siemens NX or similar 3D CAD tools * Familiarity with mechanical design of electrical assemblies, including enclosures, brackets, and harness routing principles * Basic understanding of structural mechanics, load paths, and first-order stress calculations * Introductory knowledge of thermal analysis, heat transfer, and thermal management concepts * Ability to read and create mechanical drawings, including dimensions and tolerances * Strong communication skills and ability to collaborate in a multidisciplinary engineering environment Additional Requirements * Must be willing to work extended hours and weekends as necessary to accomplish our mission * Must work 100% onsite at El Segundo HQ Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $74K - $130K

Job DescriptionSENIOR OPTO-MECHANICAL ENGINEER (HIGH-POWER LASERS) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. In this role, you will be responsible for leading the design and development of custom opto-mechanical systems for the world's most advanced metal 3D printing systems. Opto-mechanical systems lie at the heart of our technology, and your solutions will unlock new capabilities for print speed, quality, precision, and throughput. You will fully own the design of custom hardware and opto-mechanical-electrical devices, as well as implement novel laser and camera solutions to enable sophisticated closed loop control. The ideal candidate is capable of acting as the technical lead for a complex system with the ability to work across engineering disciplines. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Design and build complex opto-mechanical systems, • Integrate high power lasers and high speed camera solutions, • Create drawings specifically to opto-mechanical GD&T standards, • Establish and own the precision alignment process including method, procedure, and software used, • Perform test and characterization of optical performance including process, equipment selection, and passing criteria, • Work closely with our process engineering team to solve physics-based interdependencies, • Work closely with mechanical, electrical, and software engineering teams to develop a robust and scalable system architecture Basic Qualifications: • Bachelor's degree (or higher) in optics, mechanical engineering or related technical field, • 7+ years of experience in opto-mechanical systems design and development, • CAD experience, including GD&T and detailed drawing documentation as it relates to opto-mechanics (ISO 10110), • Strong mechanical engineering and physics fundamentals, • Systems-level thinker also able to perform detailed work; has previously delivered complex opto-mechanical systems Nice to Have: • 10+ years of opto-mechanical design experience, • Experience with high power lasers (tens to hundreds of watts), • Experience designing optics for industrial systems such as semiconductor (i.e. etching), laser cutting, long distance laser communication, etc., • Ability to do system level and component level opto-mechanical tolerancing, • Experience with athermalization design, preferably with high power lasers, • Experience with STOP analysis, • Experience working around optical simulation software (Zemax or Code V), • Hands on experience with alignment/assembly of complex optical systems, • Basic understanding of image and signal processing, • Knowledge of motion control and kinematics, • Experience with design of fluid or thermal systems Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. * Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $120,000-$200,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Emerald Technologies has an exciting opportunity for a Senior Manufacturing Engineer to join our Brea, CA team! We’re a fast‑growing PCBA contract manufacturer supporting aerospace, defense, medical, industrial, and commercial markets. In this role, you’ll help shape how products are built, improve processes, and drive technical excellence across our manufacturing operations. At Emerald Technologies, every employee plays a meaningful role in building innovative products for our customers. Join a supportive, collaborative team where your work matters and your career can grow without limits. Responsibilities of the Senior Manufacturing Engineer: • Lead manufacturing readiness reviews and communicate build strategies to cross‑functional teams., • Review customer drawings and documentation for manufacturability and compliance., • Develop and maintain manufacturing plans, work instructions, tooling requirements, and process documentation., • Drive continuous improvement initiatives to enhance quality, efficiency, and throughput., • Analyze quality issues, identify trends, and implement corrective and preventive actions., • Specify, evaluate, and justify equipment, fixtures, and special processes for production., • Provide technical support to manufacturing, test engineering, and production teams. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the Senior Manufacturing Engineer: • Bachelor’s degree in Electrical, Electronics, Mechanical, or Manufacturing Engineering (or related field)., • 7–10 years of experience in PCBA, cable assembly, or electromechanical manufacturing., • Experience in contract manufacturing, preferably supporting military/aerospace customers., • Strong knowledge of IPC‑A‑610 and J‑STD‑001 standards., • Hands‑on experience with Lean, 6S, and continuous improvement methodologies., • Proficiency with CAD tools and MES systems (Aegis preferred)., • Demonstrated ability to solve complex problems and lead cross‑functional technical initiatives. Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Work Schedule: This position follows a standard Monday–Friday schedule, 8:00 a.m. to 5:00 p.m. Engineering schedules may vary based on business needs and operational support requirements. Flexibility is expected to ensure adequate coverage, and while typical hours are Monday through Friday, occasional adjustments may be necessary. Work Hours: Full‑time, approximately 40 hours per week. This is a salaried position, and occasional additional hours may be required based on business needs.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now! Cold Heading Operator Department: SHOP Department/ Area: Cold Heading Position Summary: Candidates are required to run batches of high strength bolts at a constant heated temperature of 1000°ree;-1100°ree; to create a head on the bolt. Ability to go through the three progressive stations to complete the end product. Experience with materials such as inconel, titanium, 8740, and 4340 preferred. National #89 or Okuma 2 dies 3 blows preferred. Minimum Qualifications: High school diploma or equivalent. Basic math skills and English reading skills. Lifting up to 25 lbs and moving 40 lbs pans with dollies. Simple blue print reading and ability to use precision measuring tools (comparators and gages) a plus. Reporting Relationships: Report to the Cold Heading supervisor Working Conditions: All day standing, repetitive manual motion, heavy physical work. Standing most of the time. Candidate will be working on a powerful cold header machine to run batches of high strength bolts at a constant heated temperature of 1000°ree;-1100°ree; Success Factors: Willingness to learn and teach, attention to details, ability to work in a group and to memorize simple procedures for machining and checking. Bi-lingual is preferred. Good communication skills a plus Position type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description 工作内容： W.H.P.M., Inc., established in 1993, is a privately held corporation headquartered at Irwindale, California, only 15 minutes away from downtown Los Angeles. The Company is a pioneer in the research and development of one-step rapid membrane tests. It has been designated a registered GMP facility for in vitro diagnostic medical devices by the FDA. Responsibilities *Set up, operate, adjust, and maintain assembly, packaging, and labeling machines *Troubleshoot mechanical and electrical equipment issues to minimize downtime *Perform preventative maintenance and routine inspections on production equipment *Monitor machine performance and ensure production efficiency and product quality *Assist with equipment changeovers, calibrations, and line clearances *Maintain accurate maintenance logs and production documentation *Follow FDA, GMP, OSHA, and company safety procedures *Work closely with production, quality, and engineering teams to support manufacturing operations *Identify opportunities for continuous improvement in equipment performance and workflow *Other duties as assigned. Qualifications *High school diploma or GED required; technical certification preferred *2+ years of experience operating or maintaining manufacturing equipment *Experience with medical device, pharmaceutical, food, or regulated manufacturing environments preferred *Knowledge of automated packaging and labeling systems *Basic understanding of mechanical, pneumatic, and electrical systems *Ability to read equipment manuals, schematics, and SOPs *Strong troubleshooting and problem-solving skills *Ability to lift up to 50 lbs and stand for extended periods Preferred Skills *Experience with preventative maintenance programs *Familiarity with GMP, FDA, and ISO manufacturing standards *Mechanical aptitude and hands-on technical ability *Strong attention to detail and organizational skills Mandarin Speaking Preferred 工作条件： 可以合法报税，工作氛围融洽，需具有责任心，细心,有团队合作精神 工作时间： 周一至周五8小时，法定节假日休息 职位为全职工作

Job Description Manufacturing Engineer - Build and Scale Advanced Optical Hardware Production! Gardena, CA | On-site Opportunity Summary A fast-growing deep-tech startup in Southern California is hiring a Manufacturing Engineer to help build and scale the production systems behind next generation optical hardware. The company is developing advanced technology that relies on precision electro-mechanical assemblies, automated production equipment, and high-quality manufacturing processes to support future high-volume deployment. This role is designed for an early-career engineer who enjoys working with real hardware systems. You will collaborate closely with experienced engineers to design production tooling, build automated assembly cells, and help transition new products from development into scalable manufacturing. The position offers the opportunity to gain hands-on experience building physical systems while contributing to the foundation of a rapidly expanding manufacturing operation. About Us We are a venture-backed technology company focused on advancing hardware systems that rely on precision optical components and complex electro-mechanical assemblies. Our team is working to bring cutting-edge technologies into scalable manufacturing environments that can support real-world deployment across multiple industries. By combining automation, advanced engineering, and modern factory infrastructure, we are building the foundation required to manufacture complex hardware at scale. Job Duties • Assist with the design and development of automated production cells, including fixtures, tooling, and assembly systems for precision electro-mechanical and optical components, • Create and modify 3D CAD models used for tooling, fixtures, mechanical interfaces, and production equipment, • Support new product introduction activities including process development, build planning, and early production builds, • Develop and maintain manufacturing documentation such as work instructions, assembly procedures, and validation protocols to support repeatable production, • Assemble, test, and troubleshoot prototype equipment and production hardware directly on the factory floor, • Evaluate production data, yield metrics, and metrology results to assist with root cause analysis and process improvement initiatives, • Work with cross-functional engineering teams to identify manufacturability improvements and feed design insights back into product development, • Assist with the development of inspection methods and production testing strategies including in-line metrology and final product validation Qualifications • Bachelor's or Master's degree in Mechanical Engineering, Manufacturing Engineering, Electrical Engineering, or a closely related field, • Strong engineering fundamentals such as mechanics of materials, controls, or heat transfer, • Proficiency using modern 3D CAD software such as NX, SolidWorks, Creo, or similar platforms, • Hands-on experience building, testing, or debugging mechanical or electro-mechanical systems through academic projects, internships, research labs, or co-op programs, • Strong analytical thinking and structured problem solving skills, • Comfortable working directly with tools, lab equipment, and physical hardware in a lab or manufacturing environment, • Willingness to support production schedules including extended hours or weekend work when required Preferred Experience • Internship, co-op, or early professional experience in robotics, automation, hardware development, or manufacturing environments, • Experience designing tooling, fixtures, or assembly aids for production or test environments, • Exposure to data analysis or scripting tools such as Python, MATLAB, or similar platforms for evaluating process performance, • Experience working with automated equipment, robotic systems, or precision assembly tools, • Familiarity with manufacturing process development tools such as PFMEA, statistical process control, or capability analysis, • Understanding of GD&T principles and tolerance analysis related to tooling and fixture design, • Exposure to production data systems, MES platforms, or traceability infrastructure used in manufacturing environments, • Familiarity with cleanroom or controlled manufacturing environments Why Join Us • Opportunity for growth in a rapidly expanding deep-tech manufacturing environment, • Ability to work directly with experienced engineers on complex hardware systems, • Hands-on exposure to advanced automation and precision manufacturing processes, • Collaborative startup environment where engineers can contribute across disciplines, • Flexible work environment, • Strong PTO policy, • Medical, dental, and vision benefits, • 401k retirement plan, • Equity participation opportunities Compensation Details Salary range: $100,000 - $160,000 #LI-AV

Job DescriptionDescriptionAs a Mechanical Engineer at Impulse for our Vehicle Engineering Team, you will own all aspects of the design, analysis, build, test and integration of flight hardware – working with cross-functional engineering teams to accomplish this. This means cradle-to-grave ownership of pressurized and/or unpressurized structures in support of Impulse’s collection of next generation advanced propulsion space vehicles. Responsibilities • Design, analyze, build, test, and document innovative structures; example systems include primary structure weldments, tank internal fluid/structural devices, payload attachment fittings, and stage propulsion/avionics integration hardware, • Steer system definition, layout, requirements, and verification, • Support first article build through the ramp to production in collaboration with the manufacturing team, rolling in DFM and reliability improvements, • Support development and qualification test campaigns in collaboration with the test team, creating test plans to gather key learnings and demonstrate flightworthiness, • Establish driving load cases and environments in collaboration with the loads/dynamics and thermal teams, • Collaborate effectively with partner teams (such as propulsion, avionics, and GNC) to create a high performing, integrated system Minimum Qualifications • Bachelor’s degree in Mechanical Engineering or related field, • 5+ years demonstrated experience designing and analyzing structural aerospace hardware, • Strong knowledge of strength and stability hand calculations for structural sizing and model validation, • Strong understanding of mechanics of materials, material failure modes, and associated analysis methods, • Familiarity with a wide set of manufacturing processes such as machining, welding, forming, and joining methods, • Proficiency with CAD software and assembly management, • Demonstrated experience working collaboratively across different teams, • Ability to communicate technical challenges, explain rationale and/or resolve concerns Preferred Skills and Experience • Master’s degree in Mechanical Engineering or related field, • 7+ years of demonstrated experience designing and analyzing highly performant structures with space-flown hardware, • Experience with aerospace aluminum welding, inspection, and allowables development, • Experience with composite primary or secondary structure design, analysis, and testing, • Experience with payload accommodations, testing, and validation, • Experience with structural testing, validation, and correlation methods, • Experience working on a launch vehicle development effort, • Experience in a startup or agile development environment Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description Responsibilities: The role of Contract Specialist is part of a team responsible for providing business and legal affairs services for unscripted programming, content acquisitions, live entertainment, and scripted programming across Versant’s portfolio of television entertainment networks, including USA Network, Oxygen, E! and SYFY. Job Duties: • Independently draft and review various legal form agreements and correspondence with regard to a range of contractual matters and clients., • Conduct research and prepare and draft memoranda and summaries on various contractual and legal provisions, rights and intellectual property matters., • Partner with business executives and colleagues on cross-functional teams and act as a resource to others in the company., • Identify opportunities for increased efficiencies and collaborations, focusing on developing policies, procedures and best practices across the company and implementing improvements to forms and processes.Qualifications, • 2+ years for Contracts Specialist, or 4+ years for Sr. Contracts Specialist, • Extensive experience in contract management, data entry and document assembly., • Proficiency with Microsoft Office applications (e.g., Outlook, Excel, and Word) and experience in document management applications., • An understanding of and demonstrated familiarity with the contracting practices related to the entertainment industry and intellectual property., • Hybrid: This position has been designated as hybrid, generally contributing from the office a minimum of three days per week. Subject to change based on business need. This position is eligible for company sponsored benefits, including medical, dental and vision insurance, 401(k), paid leave, tuition reimbursement, and a variety of other discounts and perks. Salary ranges: * Contracts Specialist: $70,000 - $80,000 * Sr. Contracts Specialist: $80,000 - $90,000 Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. For LA County and City Residents Only: VERSANT Media will consider for employment qualified applicants with criminal histories, or arrest or conviction records, in a manner consistent with relevant legal requirements, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the Los Angeles County Fair Chance Ordinance for Employers, and the California Fair Chance Act, where applicable. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to . VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job DescriptionProduct Lead (Devices) Location: Los Angeles, CA (Onsite) Compensation: $120,000-$145,000 About the Role The Hardware Product Lead (Devices) owns SprintRay hardware products end-to-end—from concept through mass production. This is a highly technical, hands-on product role for someone with a strong engineering background (Mechanical, Electrical, or Industrial) who can translate complex technical constraints into clear product decisions. You will act as the single accountable owner for assigned hardware products, driving execution across engineering, manufacturing, firmware, regulatory, and go-to-market teams. You will lead EVT/DVT/PVT, partner closely with China manufacturing, and ensure products ship on time without compromising quality, performance, or reliability. This role sits at the intersection of engineering rigor and product judgment. You are fluent in hardware development details (DFM, tolerances, power systems, thermal considerations, manufacturability) while balancing timelines, cost, user needs, and business priorities. Key Responsibilities * Own hardware product execution from concept through mass production, including roadmap delivery, schedules, milestones, and risk management * Serve as the single product owner for assigned hardware platforms, accountable for technical, schedule, and quality outcomes * Partner with Mechanical, Electrical, and Firmware Engineering to define requirements, resolve design tradeoffs, and drive technical decisions * Lead EVT/DVT/PVT planning and execution, including test strategies, validation plans, and production readiness * Collaborate with China-based manufacturing partners on DFM, tooling, production ramp, quality control, and yield improvements * Work closely with Device Software Product Specialist to align firmware behavior, power management, connectivity, and system performance * Partner with Industrial Design and UX to deliver intuitive, clinically appropriate products while respecting engineering constraints * Interface with Regulatory and Quality to support risk assessments, testing requirements, and compliance activities * Use field data, telemetry, service feedback, and failure analysis to drive continuous reliability and design improvements * Identify and resolve cross-functional technical blockers across hardware, firmware, manufacturing, and supply chain * Communicate clear product status, risks, and mitigation plans to leadership; escalate early with options and recommendations * Manage hardware product lifecycle, including backward compatibility, hardware transitions, and end-of-life planning * Support product launches in partnership with Marketing and Sales, including positioning, packaging, pricing inputs, and adoption support Required Qualifications * Bachelor’s degree in a technical field (Mechanical, Electrical, Industrial, Manufacturing Engineering, or similar) * 3–5+ years of experience in hardware engineering, manufacturing engineering, or technical product roles * Strong technical fluency in electromechanical systems; able to review CAD, schematics, tolerances, and DFM considerations * Hands-on experience with full hardware development cycles (EVT/DVT/PVT, tooling, production ramp) * Manufacturing knowledge across processes such as injection molding, CNC machining, sheet metal, or PCB assembly * Proven ability to work cross-functionally with Engineering, Manufacturing, Regulatory, Quality, Design, and Operations * Data-driven problem solver who leverages test results, field data, and root cause analysis to guide decisions * Clear, concise communicator who can translate technical complexity into actionable product tradeoffs * Bias for action; comfortable making decisions in ambiguous, fast-moving environments Preferred Qualifications * Degree in Mechanical Engineering, Electrical Engineering, or Mechatronics * Experience in medical devices, dental products, consumer electronics, robotics, or precision hardware * Familiarity with additive manufacturing, 3D printing, optical systems, or imaging devices * Exposure to firmware, embedded systems, or connected/IoT hardware * Experience working directly with China-based manufacturers and suppliers * Verbal fluency in Chinese Travel * 20–30% travel, including China manufacturing sites, suppliers, and customer observation visits Employment Type Full-time, Onsite About SprintRay SprintRay is rewriting the rules of dentistry with technology that’s smart, fast, and designed to make life easier for dental professionals. Since 2014, we’ve been on a mission to deliver the most advanced 3D printing solutions in the industry—combining hardware, software, and materials into one seamless ecosystem. But what really makes SprintRay different is our people. We’re a bold, global team of innovators, problem-solvers, and doers who thrive on pushing boundaries and challenging the status quo. Every product we create is driven by a simple goal: help dentists spend less time on repetitive tasks and more time changing patients’ lives. Our culture is entrepreneurial, collaborative, and fueled by curiosity. We celebrate diverse perspectives and believe the best ideas can come from anywhere. Whether we’re building next-generation AI tools, designing new materials, or supporting our customers on the front lines, we’re united by the same passion—transforming digital dentistry and having fun while we do it. At SprintRay, the future of dentistry is being printed today. Want to be part of it? Equal Opportunity Employer SprintRay is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. To All Recruitment Agencies: Without a written agreement signed by an officer of SprintRay: a) SprintRay does not accept resumes from recruiting agencies, headhunters, or any other party expecting payment in the event SprintRay speaks with or hires a candidate from such submitted resume; b) SprintRay is not responsible for any fees related to unsolicited resumes or related Terms of Service, and c) Unsolicited resumes received will be considered the property of SprintRay and will be processed accordingly. Accessibility If you need a reasonable accommodation during the application or interview process, please contact us at .

Job Description Why Castelion, Why Now Castelion is moving incredibly fast to develop and deliver advanced defense systems at a time when execution matters more than ever. We believe focus and technical excellence are decisive advantages - and we are building a team that can deliver real capability, not just concepts. This is a rare opportunity to join at an early stage, where your work will directly shape critical systems, influence major technical decisions, and have immediate, real-world impact. Senior Propulsion Engineer The Senior Propulsion Engineer plays a critical role at Castelion, owning the design of solid rocket motor primary and secondary structures as well as key propulsion components. This position is central to our ability to deliver at speed and scale, with a strong emphasis on driving technically sound designs that meet aggressive schedule, affordability, and production goals. Responsibilities • Translate project objectives into cost-effective designs that can be produced at scale – the Castelion way., • Spearhead the creation of innovative solid rocket motor designs, demonstrating autonomy even with limited expert guidance., • Actively engage in the assembly, testing, and troubleshooting of prototypes and production builds, providing expert guidance as necessary., • Use our rapid iteration cycles to validate product performance and facilitate necessary design adjustments., • Produce, evaluate, and authorize CAD models and drawings, adhering to internal standards and ASME Y14.5-2009 guidelines., • Provide thorough assessments and resolutions for any discrepancies in hardware, including supporting analyses when required., • Bachelor's or advanced degree in aerospace engineering, manufacturing engineering, materials engineering, mechanical engineering or physics., • 5+ years of mechanical or fluids design, analysis, or build experience (student project team, university rocketry club and internship experience counts)., • Proficient in test methods/setups, with the ability to conduct trade studies using engineering fundamentals to make informed recommendations, even with limited information., • Extensive experience working with aerospace materials (including metals, plastics, and composites) and a solid understanding of spacecraft and/or launch vehicle propulsion systems and fluid components., • Skilled in CAD software (NX 8.5 or similar packages like PTC Creo, CATIA) with expertise in geometric dimensioning and tolerancing (GD&T) per ASME Y14.5-1994., • Relevant experience with rocket motors, solid propulsion elements, and structural interfaces, including knowledge of insensitive munitions protocols and practices., • Hold a Master's degree or PhD in a technical discipline such as mechanical or aerospace engineering., • Hands-on experience supporting rapid product development, including designing hardware for high-rate production in alternative non-aerospace domains., • Willing and able to work extended hours and/or weekends with minimal notification to meet critical deadlines leading up to major milestones. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Benefits And Perks All full-time employees are granted meaningful long-term equity, sharing in the company's significant growth trajectory. We offer four (4) weeks of paid time off, ten (10) company-paid holidays, and comprehensive health benefits - including 100% employee-covered medical and strong dependent coverage, along with dental and vision plans. We also provide paid parental leave to support growing families, a $100 monthly fitness stipend to promote health and performance, and onsite EV charging for convenience. In addition, employees enjoy perks like catered meals, company-covered food during high-demand periods, and a fully stocked kitchen to stay fueled throughout the day. While this position does not currently require a U.S government-issued security clearance, it may in the near future. Therefore, the ability to obtain and maintain a U.S. government–issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Affirmative Action/EEO Statement Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Job Title: Manufacturing Engineer – Avionics Hardware and Wire Harnesses Job Description This role focuses on developing and optimizing manufacturing processes for avionics hardware and wire harnesses, ensuring products are designed for manufacturability, production is ready and efficient, and quality standards are consistently met. The Manufacturing Engineer partners closely with design, supply chain, quality, and build teams to create robust process documentation, support production builds, and drive continuous improvement across avionics manufacturing operations. Responsibilities • Develop detailed process plans, work instructions, and work orders for the manufacturing of avionics hardware and wire harnesses., • Conduct Manufacturing Readiness Reviews (MRRs) to confirm production readiness, identify risks, and implement mitigation plans before major builds., • Collaborate with design engineers to provide Design for Manufacturability (DFM) feedback and enhance product designs for ease of fabrication and assembly., • Support build technicians on the production floor by troubleshooting manufacturing issues, resolving non-conformances, and implementing effective corrective actions., • Work closely with supply chain and quality teams to ensure the procurement and inspection of high-quality avionics components., • Analyze process performance and yield data to identify trends, address issues, and drive continuous improvement initiatives., • Develop and maintain capacity and demand plans to align manufacturing capabilities with production requirements., • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, or a related field., • 7+ years of experience in manufacturing, process development, or production support for avionics hardware., • Hands-on experience with printed circuit board assemblies (PCBAs), avionics boxes, or wire harness fabrication and assembly., • Knowledge of IPC standards for PCB and cable assembly., • Proven experience developing and maintaining process documentation such as manufacturing work instructions, process control plans, and test procedures., • Ability to collaborate effectively with design, supply chain, quality, and production teams to solve complex manufacturing problems., • Experience supporting build technicians on the production floor and resolving non-conformances in a timely and structured manner., • Demonstrated capability to conduct Manufacturing Readiness Reviews (MRRs) and manage risk mitigation activities., • Background in Design for Manufacturability (DFM) and familiarity with improving product designs for efficient fabrication and assembly., • Experience working with avionics components and systems in a production environment. The role operates in a manufacturing and engineering environment focused on avionics hardware and wire harness production. You will work closely with design engineers, build technicians, and supply chain and quality teams, spending time both in an office setting for planning and documentation and on the production floor to support builds and troubleshoot issues. The environment emphasizes adherence to IPC standards, robust process control, and continuous improvement of yield and throughput, with a strong focus on quality, reliability, and collaboration across functions. Job Type & Location This is a Contract to Hire position based out of Long Beach, CA. Pay and Benefits The pay range for this position is $50.00 - $67.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionAbout Us At Arbor Energy & Resources Corporation ("Arbor Energy"), we're creating technology to power our lives while protecting the planet that sustains them. Our advanced power systems deliver clean, reliable baseload electricity with zero operating emissions—modular, fuel-flexible, and engineered for the realities of today's energy demand. At the core is a supercritical CO₂ turbine with integrated carbon capture, designed to bring carbon-neutral power online quickly at meaningful scale. Our team includes aerospace engineers, combustion experts, and systems thinkers with a shared goal: to build technology worthy of the world we want to live in. While many of us began our journeys looking to the stars, we're applying that expertise here at home to deliver dependable, emission-free baseload power and a future of lasting abundance. If you share our values and are drawn to rigorous work with lasting impact, we'd love to learn more about you. Come build what the future will run on. Steward our planet: We build for tomorrow, ensuring every bolt we tighten and every hand we lend leaves our environment stronger than we found it. Lead with Love: We champion the success of our people, partners, and planet, nurturing excellence through camaraderie and rigor. Explore the Uncharted: We embrace the unknown with curiosity, using courage and discipline to transform uncertainty into opportunity. Role Overview We are seeking a Mechanical Design Engineer for our Combustion team to own the 3D design of high-temperature, high-pressure hardware from concept through fabrication. You'll collaborate closely with combustion engineers, analysts, and test engineers to develop practical, test-ready systems. Your work will leverage metal additive manufacturing, precision machining, and algorithmic design techniques to push the boundaries of modern fabrication. Responsibilities • Lead detailed 3D modeling of complex components and assemblies., • Apply Design for Additive Manufacturing (DfAM) principles to optimize performance, cost, and manufacturability., • Create complete drawing packages with GD&T, assembly documentation, and bill of materials (BOMs)., • Translate engineering requirements into practical, buildable designs., • Generate work instructions and collaborate with technicians during builds and test campaigns., • Continuously iterate based on feedback from analysis, testing, and fabrication. Requirements, • Bachelor's degree in Mechanical, Aerospace, or a related Engineering discipline., • 3+ years of experience in mechanical design of high-performance systems., • Proficiency in CAD software (Siemens NX preferred; others such as SolidWorks or Creo also acceptable)., • Experience producing fully detailed drawing packages including GD&T and manufacturing specs., • Experience with additive manufacturing and DfAM principles., • Understanding of additive constraints: overhang angles, support strategy, build orientation, powder removal, etc. Preferred Qualifications, • Exposure to material behavior and surface finish considerations in high-temperature AM alloys (e.g., Inconel 625/718, Hastelloy, Haynes)., • Familiarity with FEA or fluid/thermal analysis workflows., • Prior experience in a fast-paced, hands-on R&D or startup environment., • Exposure to combustion systems, high-temperature materials, or pressure vessels. Compensation & Benefits, • Pre-IPO stock options, • Medical, dental, and vision insurance (Arbor covers 90% for employees), • Basic life insurance fully covered, • Health savings account (HSA) with matching, • Flexible savings account (FSA), • Unlimited PTO, • 12+ company holidays, including Earth Day!, • 401(k), • Commuter benefits, • Annual learning and development stipend Our hiring process is designed to be accessible, fair, and focused on the work that matters most for this role. Reasonable accommodations are available throughout the hiring process and employment—please let us know if you need one.

Job Description SUMMARY Without the strength of our employees, we would not be able to offer the industry-leading service we’re known for. We truly believe in excellent jobs for AMAZING people! In this role, the qualified candidate will perform Laser Inspection in support of product conformance and generate the required inspection data packages. Work with Customer Representatives (source inspectors) in presenting / verifying conformance prior to delivery. Assist manufacturing in verifying assembly. The Laser inspector shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBILITIES · Proficiency of Metrology methods for aerospace industry to ensure quality assurance · Generate inspection reports. · Perform Laser/ mechanical and visual inspection on product utilizing both engineering data and electronic models. · Present product and data packages to Customer source inspectors. · Work with Production to support inspection schedules. · Any other duties as assigned. · Must understand how customer products are impacted in the event of failure KNOWLEDGE & REQUIREMENTS · Must be detail oriented, extremely organized, must possess excellent communication skills. · Must have excellent blue print/ Model interpretation skills. · Must have working knowledge of Customer requirements / specifications. · Must have working knowledge of Master Cam & VERISURF software. · Must have working knowledge of Laser equipment utilizing VERISURF. · Must have working knowledge of Catia modeling software. · Must have direct communication with internal customers. · Must be trained of applicable changes & customer requirements. · Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION & EXPERIENCE • High school graduate or equivalent in work experience., • Three (3) + years' experience in inspecting machine parts and assemblies using including LASER Technology & Practices., • Three (3) + years’ experience using Laser Inspection., • Three (3) + years' experience working with Customer Source Inspectors. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. TRAVEL REQUIREMENTS: No travel required for this position. PHYSICAL REQUIREMENTS: As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. 2nd shift