Quality engineer jobs in Saint Paul, Minnesota - Page 4Create job alerts

Job Description Position Title: Quality Engineer Pay Range: $80,000-$85,000 What You'll Do Provide Manufacturing and Quality Engineering leadership to a manufacturing location or other divisions as assigned. Develop quality plans, operational procedures, quality assurance and quality detection systems, control points, quality measures and process qualifications. • Develop, maintain and implement effective quality plans, procedures, standards and measures in support of the quality management system., • Work with Engineers, manufacturing and customers to ensure customer requirements are understood and satisfied. Support and coordinate Project Management functions., • Review and analyze quality system results such as customer complaints, warranty returns, scrap, rework and nonconformance. Prepare reports and initiate appropriate actions., • Plan, conduct, and direct audits of products, processes and the quality management system., • Apply process controls including controls using statistical methods at appropriate process control points., • Develop and maintain an effective material traceability systems for incoming, in-process and completed products and materials., • Support an effective welding program consistent with AWS/ASME requirements, • Lead the efforts of quality coordinators as assigned., • Perform various other duties as assigned by the supervisor., • Some travel may be required to global manufacturing, supplier, and customer facilities., • Must know Quality Policy and comply with all requirements of the Quality System Manual, Operating and technical procedures and work instructions as it applies to the position., • Assist team as needed for in process & final inspections., • Perform various other duties as assigned by the Manager.Required Education and Skills, • BS degree in Engineering preferably in Welding required, • Minimum 3 years of experience required, • Professional standing with appropriate professional society; AWS, ASME, ASQ is highly desirable, • Certified Auditing experience of internal and suppliers processes, • Ability to read, analyze, and interpret common scientific and technical publications, • Knowledge of quality processes, procedures, and measures, • Solid understanding of statistical methods and quality improvement techniques, • Knowledge of AWS CWI, NDT inspection certifications to support preferred, • Ability to support an effective Quality Management System consistent with International Quality Standards, currently ISO 9001 and NSF61, • Experience in a manufacturing welding environment is highly desirable, • Knowledge and experience in Continuous improvement, • Solid knowledge of engineering documents, processes, and procedures, • Ability to communicate effectively with all levels of the organization (written and verbal) At Johnson Screens, we value open-mindedness, competence, collaboration, and integrity. We support our people with competitive total rewards, comprehensive benefits, and continuous development – so everyone can work with confidence and deliver results that matter. Shared Cost Benefits Medical and Prescription Drug Insurance, Dental Insurance, 401(k) Plan - 5% Employer Match, Health Spending Account (HSA) Employee Paid Benefits Vision Insurance, Flexible Spending Account (FSA), Supplemental Life and AD&D, Critical Illness, Hospital Indemnity, Legal Insurance Employer Paid Benefits 80 Hours of Paid Holidays per Year, Vacation Time Off, Sick Time, Short-Term Disability, Long-Term Disability, Basic Life and AD&D, Accident Insurance, Business Travel Accident Insurance, Employee Assistance Program (EAP), Tuition Reimbursement, Student Scholarships About Johnson Screens – A brand of Aqseptence Johnson Screens is the leading global provider of innovative screening and separation solutions. We support a wide range of industries, which means that almost every product around us has touched one of our screens during its manufacturing process. Since our inception over a century ago, our products have helped protect lives by reducing harmful waste, providing clean water, and making the best use of our precious natural resources. We strive to be a great place to work and do what is right for our customers and our people. We thrive on innovation and continuous improvement, and we believe that our people are the key to our success. Our daily work is guided by six values, which we call our True North: Open-Mindedness Competence Confidence Collaboration Integrity Results This is the standard we hold ourselves to – and we’re raising the bar. High performers belong here. If you’re ready to make your mark, we’re ready to meet you. Apply now and grow with Johnson Screens. Johnson Screens is an equal opportunity employer, including disability and protected veteran status.

Job Description Bolton & Menk has an exciting opportunity for a Civil Project Manager, PE to join our Municipal team in our Oakdale office. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. We are looking to add a Civil Project Manager, PE who will help foster our mission that All People Should Live in Safe, Sustainable and Beautiful Communities! What You Will Be Doing: As a Civil Project Manager you will be responsible for planning, development, and completion of projects ensuring client satisfaction and budget management.. What We Are Looking For: • Bachelor's degree in Civil Engineering from an accredited college or university, • Licensed Professional Engineer, • 10+ years' progressive experience in the civil engineering field, including experience working with municipal infrastructure., • Experience with client relationship management and business development., • Experience in plan and specification development with construction contract administration., • Experience with municipal business development and building strong client relationships, • Experience conducting community meetings and communication Salary Range: $83,000 - $155,000 depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s sex or other status protected by local, state, and/or federal law. Supporting Our Employees There’s life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: • Competitive compensation plan - overtime compensation available to most employees, • Discretionary bonuses available to most employees, • ESOP - Employee ownership (ESOP); 100% company-paid contributions, • 401(k) Match Program, • Paid time off (PTO), • Volunteer Time Off (VTO), • Six paid company holidays, • Two floating personal holidays for events that are important in your life, • Tuition reimbursement, • Parental leave, • Short term and Long-term disability, • Dependent care reimbursement, • Employee assistance program, • Health insurance, • Flexible spending account, • Life insurance OUR BENEFITS At Bolton & Menk, we value our people and provide an exceptional Total Compensation and Benefits Package to protect our most valuable asset. We are committed to the well-being of our employees and their families. Perks of being a Bolton & Menk employee include peace of mind with our benefits package and competitive compensation plan, flexible schedules, and career development opportunities. Learn more here: We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required after any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets.

Job Description Bolton & Menk has an exciting opportunity for a Project Engineer, PE to join our Active Transportation team in our Minneapolis office. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. We are looking to add a Transportation Project Engineer, PE who will help foster our mission that All People Should Live in Safe, Sustainable and Beautiful Communities! As an Active Transportation Project Engineer you will assist our transportation, traffic and municipal project managers in coordinating, planning, scheduling and execution of bicycle and pedestrian design projects. We are looking for candidates who possess a high capacity for self-motivation and can apply engineering and transportation engineering knowledge to a variety of projects. In addition, you must be able to develop and maintain strong relationships with clients and staff from various agencies. What You Will Be Doing: • Performs detailed design computations, • Performs preliminary layout, modeling and design., • Researches and prepares rough drafts of preliminary reports and feasibility studies., • Bachelor's degree in Civil Engineering from an accredited college or university or closely related, • Licensed Professional Engineer (P.E.), • 4+ years' progressive experience in the civil engineering field, including transportation and municipal infrastructure, • Experience in plan and specification development with construction contract administration, • Proficiency in AutoCAD and/or Microstation, GeoPAK Drainage, HydroCAD, P8 and GIS Salary Range: $68,000 - $120,000 depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s sex or other status protected by local, state, and/or federal law. Supporting Our Employees There’s life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: • Competitive compensation plan - overtime compensation available to most employees, • Discretionary bonuses available to most employees, • ESOP - Employee ownership (ESOP); 100% company-paid contributions, • 401(k) Match Program, • Paid time off (PTO), • Volunteer Time Off (VTO), • Six paid company holidays, • Two floating personal holidays for events that are important in your life, • Tuition reimbursement, • Parental leave, • Short term and Long-term disability, • Dependent care reimbursement, • Employee assistance program, • Health insurance, • Flexible spending account, • Life insurance Bolton & Menk, Inc. specializes in providing community infrastructure solutions. Since 1949, we have been committed to improving quality of life through engineering excellence and client satisfaction. From advocating for our communities to designing their dreams to finding funding; we take pride in our work because we live in these same communities. Today, Bolton & Menk has more than 1,000 employees throughout more than 40 locations in Minnesota, Iowa, North Dakota, Wisconsin, Colorado, North Carolina and South Carolina providing services to more than 400 communities and agencies. Learn more about our history here: OUR BENEFITS At Bolton & Menk, we value our people and provide an exceptional Total Compensation and Benefits Package to protect our most valuable asset. We are committed to the well-being of our employees and their families. Perks of being a Bolton & Menk employee include peace of mind with our benefits package and competitive compensation plan, flexible schedules, and career development opportunities. Learn more here: We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required after any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets.

Job DescriptionDescription: Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, Minnesota Position: Senior Technical Support Engineer Primary Objective of Position: Provide technical support related to the motor, generator, control, and related WEG products; create and process warranty claims. Major Areas of Accountability: • Provide technical support to customers, interfacing with the engineering, commercial, and quality teams as necessary., • Resolve service requests effectively and promote strong customer relationships., • Analyze field data, recommend corrective action, and write and edit service reports related to warranty work., • Organize and coordinate inspection, analysis, and disposition of returned equipment, parts, and material., • Travel to client locations to inspect products to determine warranty claims., • Be a liaison between the sales force, customers, users, and factory, providing technical information and assistance to sales offices, customers, and users., • Deliver Client training pertaining to EM products and services., • Mentor Junior staff., • B.S. degree in Electrical, Industrial, or Mechanical Engineering., • Demonstrated sense of urgency to affect timely response and resolution to customer requests., • Demonstrated oral and written communication skills and proven ability to effectively deal with difficult customers., • Demonstrated project management skills, including direction of technical and non-technical staff and customers., • Demonstrated ability to keep multiple tasks and activities coordinated, prioritized, documented, and in motion or progress at one time., • Demonstrated capability for social interface with internal and external customers as required, achieving customer satisfaction excellence., • Computer literate with knowledge of current operating systems and software common to business applications including; SAP, MS Outlook, Word, Excel, PowerPoint, Project, • Physical ability to travel freely within manufacturing and office facilities., • This requires climbing stairs and moving over, around, and about shop machinery and in-process apparatus in a safe manner., • Physical ability to climb a ladder, use scaffolding or catwalks to service machinery., • Physical ability to lift and carry 25 pounds., • Physical ability to travel via public, commercial or personal transportation., • Must possess an insurable driver’s license., • Physical ability to travel freely within manufacturing and office facilities. This requires climbing stairs and moving over, around, and about shop machinery., • Have the physical ability to lift and carry up to 45 pounds unassisted., • Physical ability to travel via public, commercial or personal transportation., • Must be able to legally drive a vehicle in the US., • Must be able to travel internationally. Company cannot provide sponsorship for this position Please, no agencies Requirements:

Job Description YOUR BENEFITS Our benefit package includes: • Starting at 4 weeks PTO per year, • 401(k) and a company match, • Profit Sharing Medical + Company HSA contribution, • Wellness Program, • Dental, • Vision, • Life Insurance, • Disability, • 6 Weeks Parental Leave, • Long term care insurance, • Tuition reimbursement, • Employee Resource Groups, • On-Site Café, • On-Site Gym Pay: $90,000-115,000 + profit sharing Position Objective: Assure Wagner Spray Tech products conform to specifications set forth in engineering documentation, while operating in the most cost-effective manner. Through active participation and involvement, lead efforts to support supplier development creating process and procedures, drive metrics and digital solutions for gathering and presenting data and information to make better and faster decisions. New product development and sustaining engineering activities in a manner that results in product designs that meet user expectations. Work with key suppliers to improve design to manufacture components and products. Responsibilities: • Utilize the ERP system to measure and analyze supplier data to drive action plans related to supplier development and process improvement to meet minimum quality and delivery standards. Support and lead investigations related to non-conforming product and assure corrective actions are implemented that address the root cause, internal to Wagner and external working with suppliers., • Participate in the design and deployment of processes, products and projects using APQP/PPAP methodologies for product and part approval to manage change and improve product quality., • Ensure manufacturing processes adhere to standards by collaborating with Manufacturing Execution System Team to guide data acquisition, analyze production data and take real time corrective actions based on available information. Implement systems to ensure conformity and accuracy in the production process to ensure products adhere to company standards and requirements., • Develop and utilize business intelligence systems to manage customer information and process improvement actions. Preparing reports by collecting, analyzing, and summarizing data., • Performs other duties and assumes accountabilities as apparent or as delegated, including mutually agreed upon objectives. Relationship To Others: Provides work direction to outside supplier partners, internal inspection, and test employees. Works closely with peers in Manufacturing and Production Operations, Manufacturing Engineering, Design Engineering, Procurement, Marketing, Product Management, Technical Service, and supplier partners. Travel required: International travel required, 10% estimated. Occasional need to interact with suppliers and Wagner sites outside standard working hours. Dimensions of Position: Position is critical to the company’s objective to introduce new products that are successful in the market. Develop new and existing suppliers and create the operational procedures to sustain the gains. Works with sensitive company design and quality data including specifications and costs. Produce and present data for decision making. Qualifications: Education and Experience • Bachelor’s degree in engineering or related discipline. Minimum of 5 years’ experience in a manufacturing environment. Technical knowledge of paint application equipment/hydraulics a strong plus. Good working knowledge of various manufacturing processes including injection molding, die casting, machining, extrusions and electro-mechanical assembly, management, and analysis of data * Experience with engineering documentation systems, design drawings, geometric dimensioning and tolerancing, gauging and a variety of inspection/test equipment and design-support tools such as QFD, D-FMEA, PFMEA. Experience with Control Plans, APQP, PPAP, and understanding of 8D (Ishikawa) root cause analysis, process and procedure creation. * Familiar with ISO 9000 requirements. * ASQ or Six Sigma Certification is preferred. * Experience working with ERP systems, SAP preferred. Able to produce and present data and analytics for improvement. Knowledge, Skills, and Abilities • Data analytics, understanding of ERP systems and data collection and presentation, SAP preferred., • Knowledge applying APQP methodologies., • Data analysis including SPC and other statistical methods, understanding of industrial quality control software (minitab and similar)., • Working knowledge of Microsoft office products including Power BI., • Quality systems and ISO Standards application and implementation knowledge, • Team player who maintains a positive attitude, • Analytical skills, Critical thinking., • Should be influential and be able to work with other people., • Driver towards continuous improvement/ quality focused., • Takes initiative and ownership to drive tasks to completion., • Exercises good judgment and decision making., • Possesses complex problem-solving skills. Working Conditions Work is performed in a standard or home office environment which requires occasionally lifting articles such as file boxes or heavier materials with help from others and/or lifting and carrying light objects frequently. A job in this category may require walking or standing to a significant degree or may involve sitting most of the time with long periods of computer work and phone usage. This position is hybrid, averaging 4 days per week in the office.

Job DescriptionSalary: $100,000 - $130,000 You deserve a job that you feel proud of, where you can channel your knowledge and skills into projects that positively affect communities, and where you design your own path. This is Alliant. Become an employee-owner of a growing engineering and consulting firm where we strive to provide a diverse and equitable culture of support and opportunities. Our success is driven by our employee-owners, and we're excited to have you be a part of it. The Impact You'll Have: Alliant Engineering, Inc., is seeking a driven, detail-orientedSeniorTransportation Engineerwith a passion for collaboratively working with Contractors, Owners, and stakeholders to develop innovative construction staging solutions. You will fill the role of MOT Design Manager on traditional and alternative delivery projects, leading a team of MOT specialists to successfully exceed project MOT goals. The successful candidate must have extensive knowledge of MnDOTs Facility Design Guide, the AASHTO Roadside Design Guide, the MnMUTCD, and MnDOTs work zone and temporary traffic control design resources. You will lead construction staging and traffic control plan generation; conduct MOT Taskforce meetings; develop Traffic Management Plans (TMP); and perform field reviews of deployed temporary traffic control configurations. You will have the opportunity to develop complex staging solutions on high-profile mega-projects nationwide, including the prospect of traveling to project sites. Responsibilities: • Lead a cohesive project team that develops MOT, construction staging, and traffic control plans on complex traditional and/or alternative delivery projects., • Generate innovative construction staging alternatives that optimize traffic operations while maximizing constructability and safety., • Guide the development of temporary construction plans, including roadway geometrics, alignments, profiles, models, and drainage., • Oversee traffic control plan design, including temporary signing, striping, safety devices, and detours., • Author Traffic Management Plans (TMP) to analyze and document impacts and mitigation techniques to businesses, residents, and surrounding roadway systems., • Work closely with contractors and owners to understand constructability needs and project MOT goals., • Develop team members by promoting technical and career growth., • Identify and track future MOT project opportunities., • Author MOT focused portions of proposals and generate scope/schedule/budgets for traditional, alternative, and hard bid projects., • Lead the MOT Alternative Technical Concept (ATC) development process on Design-Build projects., • Opportunity to travel to project pursuits and delivery outside of Minnesota, if desired. Qualifications: • Bachelor's degree in Civil Engineering, • Licensed Professional Engineer with the ability to obtain MN licensure within 6 months, • 10+ years of progressive experience developing MOT, construction staging, or traffic control design and plans, • Experience supervising, leading, teaching, and mentoring project staff, • Strong working technical knowledge of engineering principles and practices related to MOT including temporary geometry design, construction staging, and traffic control, • Excellent communication and interpersonal skills and the ability to work in a team environment, • Skillful in presenting technical concepts to clients and the public in understandable terms, • Technical expertise using Microstation/Geopak and OpenRoads Designer on transportation projects, • Commitment to delivering high-quality work on schedule, • History of establishing and fostering strong client relationships, • Design-Build or CM/GC experience preferred, • Experience developing ATCs on Design-Build projects preferred Benefits: At Alliant, we take care of our employees by offering a world class benefit package including: • Competitive Salary with Bonus Opportunities, • Market-Leading Profit Sharing, ESOP and 401k Contribution Programs, • Medical (with HSA Contribution), Dental, and Vision Plans, • Company Paid Life Insurance, Short-Term Disability and Long-Term Disability, • Flexible Spending Accounts for Medical and Dependent Care, • Wellness Programs and Competitions, • Generous Annual Leave and Compensatory Time Off Programs, • Flexible Schedules, • Casual Work Environment, • Paid Professional Development and Training, • Community Involvement/Charity Events, • Numerous Employee Focused Events (Lunch & Learns, Office Recreation Room, Off-Site Socials, Etc.) Who We Are: Alliant Engineering, Inc., an employee-owned company, is a growing engineering, planning, landscape architecture, and surveying firm with a strong culture of customer service, quality, delivery, and innovation. At Alliant we work hard; we have fun; and we love it. We design solutions that address current needs while paving the way for a brighter future. We provide a culture of diversity, equity, and support, where everyone is given the opportunity to grow and succeed. We approach every project with unwavering confidence yet remain humbly committed to designing work that speaks for itself. At Alliant, our employee-owners are the force behind our success, and we can't wait for you to join us to build better communities with excellence and passion. The base salary for this position is expected to be in the range of $100,000 - $130,000 annually, depending on experience and qualifications. The selected candidate must be authorized to work for any employer in the U.S. without requiring visa sponsorship now or in the future.

Job Description Job Summary: We’re looking for a detail-driven CADD Technician to support our bridge engineering team by transforming design concepts into clear, accurate construction documents. If you enjoy precision, problem-solving, and turning complex ideas into buildable plans, this role sits right in the sweet spot between creativity and engineering reality. You’ll work alongside engineers, designers, and project teams to help deliver bridge and transportation projects that move communities forward. Job Duties: • Prepare detailed 2D and 3D drawings for bridge, culvert, and transportation structure projects, • Develop construction plans, details, sections, and quantity sheets, • Revise drawings based on engineer markups, redlines, and design changes, • Maintain drafting standards, file organization, and quality control procedures, • Coordinate plans with roadway, civil, survey, and utility disciplines, • Assist with plan set production for bidding, permitting, and construction, • Utilize CADD software to model structural components and layouts, • Perform quantity takeoffs and drafting-related project support tasks, • Associate degree or technical diploma in Drafting, Design Technology, Civil Engineering Technology, or related field preferred, • 2+ years of CADD drafting experience in civil, structural, or transportation projects preferred, • Proficiency in Autodesk: civil 3D; Bentley: ORD & Power Geopak or related software, • Understanding of engineering plans, sections, details, and construction documents, • Ability to manage multiple deadlines and shifting priorities, • Strong attention to detail and commitment to accuracy, • Effective communication and teamwork skills, • Ability to work schedules conducive to project-specific requirements that may extend beyond the typical work week., • Experience with bridge or transportation structure drafting, • Autodesk: Revit; Bentley: Open Bridge Modeler, • Experience working with DOT standards and transportation agencies, • Knowledge of bridge geometry, reinforcing details, and structural layouts The physical demands described represent those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities. The employee is regularly required to: Sit, stand, walk, stoop, kneel, twist, crouch and crawl Use hands to handle, or feel objects, tools, or controls; and reach with hands and arms Talk or hear and communicate clearly The employee must: Frequently lift and move up to 10 pounds and occasionally lift and move up to 25 pounds and infrequently up to 50 pounds What else you need to know This job description is not meant to be all-inclusive or restrictive and other duties may be assigned. It is a description of the job as presently defined and is subject at any time to revision. This document is intended to describe the general nature and level of work being performed by individuals assigned to this classification. This is not to be construed as an exhaustive list of all responsibilities, duties, and skills required. Individuals may be required to perform duties outside of their normal responsibilities, as needed. At KLJ, we have a vested interest in the personal, financial, and professional goals of our employees. We offer a competitive full suite benefit package including health, dental, vision, and life insurance, performance bonus, 401k, employee stock ownership program and a flexible work environment that gives you options to support excelling both professionally and personally. The options available for the current year are described at . All applicants must be authorized to work in the US, without employer-sponsorship. KLJ does not sponsor individuals for employment-based visas and does not participate in any OPT training program. KLJ will not be partnering with third-party recruiters on this position. Please review our third-party recruiting policy at . Position will be posted until filled.

Job Description Bolton & Menk has an exciting opportunity for a Design Engineer, EIT, to join our Municipal team in our Oakdale office. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. In this entry level civil engineering role, we are looking to add an EIT who will help foster our mission that All People Should Live in Safe, Sustainable and Beautiful Communities! The majority of your time will be spent assisting project managers and project engineers in design and construction phase activities on Municipal projects. This position is open to December 2025, May 2026 graduates or an experienced EIT with 1-3 years of experience. What You Will Be Doing: • Assist Project Engineers with design and construction phase activities on municipal projects, • Perform basic design computations, preliminary layout and design, research and prepare rough drafts of preliminary reports and feasibility studies, • Assist with project plans and specifications, preparing cost and quantity take-off estimates, • Bachelor's degree in Civil Engineering from an accredited college, • Certified Engineer-in-Training or able to obtain within 12 months of hire, • Prior experience in either infrastructure design and/or construction observation, • Working knowledge and skills in CAD and design software.(i.e. AutoCAD Civil3D, MicroStation), • Requires frequent travel during construction season Salary Range: $58,000 - $90,000 depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s sex or other status protected by local, state, and/or federal law. Supporting Our Employees There’s life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: • Competitive compensation plan - overtime compensation available to most employees, • Discretionary bonuses available to most employees, • ESOP - Employee ownership (ESOP); 100% company-paid contributions, • 401(k) Match Program, • Paid time off (PTO), • Volunteer Time Off (VTO), • Six paid company holidays, • Two floating personal holidays for events that are important in your life, • Tuition reimbursement, • Parental leave, • Short term and Long-term disability, • Dependent care reimbursement, • Employee assistance program, • Health insurance, • Flexible spending account, • Life insurance OUR BENEFITS At Bolton & Menk, we value our people and provide an exceptional Total Compensation and Benefits Package to protect our most valuable asset. We are committed to the well-being of our employees and their families. Perks of being a Bolton & Menk employee include peace of mind with our benefits package and competitive compensation plan, flexible schedules, and career development opportunities. Learn more here: We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required after any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets. Bolton & Menk will currently not be providing visa sponsorship or Optional Practical Training Extensions for STEM Students. Individuals must be legally authorized to work in the US at the start of employment without a need for current or future visa sponsorship.

Job Description POSITION SPECIFICATION Position: Senior Chemical Engineer Department: Industrial, Process & Agribusiness (IPA) Reporting Relationship: Senior Project Manager, IPA COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit . POSITION OVERVIEW & RESPONSIBILITIES The Senior Chemical Engineer plays a key role in the successful execution of projects. This individual will provide technical and engineering excellence, as well as successful delivery of work to our customers. The Senior Chemical Engineer is responsible for a high level of customer satisfaction by ensuring expectations are clearly communicated and managed – both externally and internally. The successful candidate will also contribute to a dynamic team environment by being proactive, clear and frequent communication, and modeling a highly collaborative working environment. This person will also actively support the business development process, through the writing of proposals and meeting with prospective and current customers. Specific responsibilities will include, but not be limited to, the following: • Actively manages assigned projects, driving them to completion. This will require a combination of strong delegation and follow-up, combined with personal execution of work as needed. Project teams will typically be staffed by people in different KFI office locations., • Applies principles from science to engineering designs and problems., • Develops PFD’s, material/energy balances, simulations (ChemCAD), and process engineering calculations., • Generates P&ID’s and reviews process piping designs., • Develops process equipment specifications and supports procurement., • Supports and leads project development (FEED/FEL) process., • Field experience related to capital project construction and start-up., • Actively directs and support process instrumentation selection and controls programming., • Provides work direction to other team members, including subcontractors, as assigned., • Supports mentoring of younger staff., • Approves final equipment selections and drawing submittals., • Provides technical and engineering support to other departments/disciplines., • Ensures that new opportunities are properly defined, scoped and priced. Actively contributes to all aspects of the business development process (i.e., proposals and customer meetings). QUALIFICATIONS Required • Bachelor’s degree in Chemical Engineering., • Minimum of 15 years’ experience to include CAPEX projects and construction, • Demonstrated proficiency in chemical processing projects and facilities, including industries such as specialty chemicals, resins, plastics, polymers, oleochemicals, inorganic chemicals or biotechnology., • Possess project management skills and knowledge of related tools and processes., • Effective meeting management skills., • Strong attention to detail., • Current experience of being the technical lead., • Strong decision-making abilities., • Adaptable and agile, responsive to quick changes in direction., • Excellent verbal and written communication skills., • Strong interpersonal skills and ability to collaborate with others., • Professional Engineering Registration or willingness to pursue this designation is desired., • Construction support field experience and/or plant operation experience., • Experience in process safety management (PSM) & process hazard analysis (PHA), • Some work locations will feature the tough terrain typical of construction sites., • Travel: May include up to 20% domestic travel at times. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Demonstrates agility, adapts well to changes., • Works well under pressure., • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Balances team and individual responsibilities., • Shares expertise with others., • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave This position is not eligible for Visa sponsorship. Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. KFI Engineers is an EOE including veterans and disability.

Job DescriptionDescription: The Senior Electrical Designer or Engineer leads the design, development, and delivery of high-quality electrical systems for a variety of building and facility projects. This role requires strong technical knowledge, leadership, and collaboration to guide design teams and ensure all work meets applicable codes, standards, and project objectives. The Senior Electrical Designer or Engineer must demonstrate the ability to break down complex systems into understandable components, lead innovation, and excel in areas of technical expertise. Success in this position depends on being approachable, maintaining a high level of self-awareness, and fostering a collaborative environment that encourages growth and excellence in others. The position also requires maintaining trusted relationships with clients and partners while ensuring that project deliverables are accurate, timely, and code-compliant. Design & Technical Leadership • Lead electrical design efforts for projects of varying size and complexity., • Develop comprehensive, code-compliant electrical system designs including power distribution, lighting, fire alarm, and control systems., • Perform load calculations, short circuit and voltage drop analysis, and energy code compliance reviews., • Oversee the creation of detailed electrical drawings, specifications, and construction documents., • Conduct facility assessments, feasibility studies, and site verifications., • Provide technical direction, review, and quality assurance for design documents prepared by others., • Plan, organize, and manage electrical design or engineering tasks throughout all phases of a project from concept through construction., • Collaborate with owners, architects, and other engineering disciplines to ensure coordinated, constructible designs., • Lead project meetings, communicate design intent clearly, and address client and contractor inquiries., • Prepare schematic design reports, design narratives, and addenda documentation., • Offer responsive construction administration services including RFI and submittal reviews., • Maintain strong client relationships through reliability, responsiveness, and technical excellence., • Mentor and coach junior engineers and designers, providing technical and professional development guidance., • Break down complex concepts to help others understand design intent and system interactions., • Perform routine project quality reviews and use these opportunities to train staff., • Share expertise in electrical technologies, energy codes, and emerging design practices., • Ensure construction documents are complete, coordinated, and in compliance with EP standards., • Maintain organized digital files and ensure proper recordkeeping and documentation control., • Lead by example through innovation, accountability, and professionalism., • Maintain approachability and open communication within the team and with clients., • Demonstrate self-awareness in interactions, feedback, and decision-making., • Manage workload proactively and demonstrate accountability for quality and performance., • Participate actively in meetings, discussions, and collaborative design reviews., • Authorization to work in the US. No visa sponsorship available., • Bachelor’s degree in electrical engineering from an ABET accredited program or a related field, • Currently residing in Minneapolis, MN area, • 8+ years of relevant electrical design or project management experience, • Strong attention to detail with excellent organizational skills

Job Description Growing firm with offices in multiple states is seeking a Senior Water Wastewater Engineer for their team in Minneapolis! Responsibilities: • Use technical expertise to serve as a technical resource, plan and design water and wastewater systems, • Business development responsibilities including identifying and pursuing strategic targets, • Build/maintain client relationships, • Meet client expectations through meeting with clients regularly, following company contractual obligations and staying current on industry trends, • Ensure that proposals address all the client's concerns, objectives, and goals, • Serve as project manager as needed (direct teams to meet budget, schedule, and quality control procedures), • Provide quality control reviews in area of technical expertise, • Participate in professional organizations and attend industry-related events to promote company capabilities Requirements: • M.S., B.S. in Environmental, Civil, Chemical, or related engineering degree, • 12+ years of experience, including working collaboratively with clients and design teams, • PE License, • Established relationships in this market, • Proven project management experience delivering quality work on time and within budget Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description Felsburg Holt & Ullevig is looking to hire a full-time Intelligent Transportation Systems (ITS) design engineer to join our National Services Group. This role can be based in any of our offices in Colorado, Iowa, Nebraska, South Dakota, Minnesota, or Utah. This position offers a mid-level engineer the opportunity for an extremely rewarding career in the transportation technology field, working on some of the largest and most complex transportation projects across the Midwest and Western US, partnering with public agencies and multidisciplinary teams to deliver innovative, technology-forward solutions. What You Will Do In this role, you will focus on the analysis, design, and delivery of ITS solutions for transportation projects. Typical assignments include ITS device design, communications networks, multimodal corridors, roadway improvements, and highway/interchange projects for public and private clients. You will: • Lead and support the design of ITS systems and communications infrastructure for transportation projects, • Develop ITS design criteria and contribute to systems engineering documentation such as Concepts of Operations, Standard Operating Procedures, and Maintenance Plans, • Prepare design layouts for fiber optic and wireless communications systems, device installations, conduits, pull boxes, splice points, electrical power feeds, and related infrastructure, • Produce conceptual design graphics and exhibits for cabinet wiring schematics, network architecture, field equipment integration, and fiber splicing, • Develop construction specifications using applicable federal, state, and municipal standards, • Use design software such as Civil 3D, MicroStation, InRoads, and/or OpenRoads to create ITS plans and contract documents, • Coordinate ITS elements with other design disciplines and subconsultants, • Mentor junior engineers and designers and oversee their work in developing construction documents, • Support quantity calculations and prepare opinions of probable construction costs, • Assist with client coordination, project meetings, presentations, agendas, exhibits, and meeting documentation, • Help keep ITS design tasks on schedule and within budget, • Maintain organized project records, design decisions, correspondence, and action items, • Work on high-impact, technology-driven transportation projects, • Gain exposure to a wide variety of clients, agencies, and project types, • Build expertise in ITS, connected vehicle systems, and communications infrastructure, • Take on increasing leadership responsibility, including mentoring staff and managing larger design efforts over time Position requirements include the following: • Bachelor’s degree in Civil Engineering or a related field from an accredited four-year college or university, or equivalent combination of education and relevant experience., • 5 to 10 years of transportation engineering experience including but not limited to ITS, Connected Vehicle, traffic engineering, and/or transit design engineering., • Professional engineer licensed in the State of Colorado. If licensed in another state will be required to obtain a CO PE license within six months after start date., • Modeling, design, and plan production experience with Civil3D and/or MicroStation/InRoads/Open Roads., • Experience in development of ITS plans, specifications, and opinions of probable costs., • Ability to multi-task several projects at one time while staying on budget and on schedule., • Ability to prepare technical reports and business correspondence with Microsoft Office applications. The pay for this position has a range of $90,000 - $125,000 annually. The actual offer will carefully consider a range of factors, including your skills, qualifications, and experience. Application Deadline: 5/29/26 Benefits At FHU we seek to provide a benefits package that helps our team maintain a healthy work-life balance - a concept that is a guiding principle for us. Employees enjoy benefits including: • Medical/RX, HSA, Dental, Vision, Life, and Disability; all of which FHU contributes a significant portion towards or, for some plans, covers 100% of the premiums, • Generous Vacation and Sick leave programs, • 401(k) with employer match and discretionary Profit Sharing, • Adoption Assistance program, • Flexible schedules and options for remote work are available but may not be conducive to every employee and position., • Professional and career development opportunities including tuition reimbursement for continuing education., • Support of employee participation in professional and technical societies & various civic organizations., • Reimbursement of professional certification and registration fees.

Job DescriptionJoin A Team Where Your Ideas Shape The Future At Nelson Rudie, we elevate the built environment - together. We’re a consulting engineering firm known for practical, high‑quality solutions and a culture built on integrity, teamwork, and problem‑solving. If you’re motivated by purposeful work, strong collaboration, and the opportunity to shape buildings that stand the test of time, you’ll feel right at home here. Why You’ll Love Working Here You won’t just produce drawings - you’ll influence project outcomes, mentor others, and bring buildings to life. Your expertise will help shape the performance, comfort, and longevity of the built environment for years to come. • Employee-Owned: Be part of a 100% employee-owned firm with a legacy of excellence since 1976., • Competitive Benefits: Medical, dental, vision, life insurance, ESOP, 401(k), bonus program, and flexible hours., • Inclusive Culture: Fast-paced, energetic, and supportive environment where every voice matters., • Work-Life Balance: Flexible schedules and a commitment to your well-being., • Impact: Work on diverse projects nationwide, making a real difference in communities., • Opportunities to Grow: Opportunity to deepen your technical expertise and expand your leadership impact., • Projects with Purpose: Your work directly enhances how people experience the spaces where they live, work, and connect. What You’ll Do As a Senior Structural Engineer, partnering directly with architects, owners, contractors, and internal disciplines, you’ll play a key role in delivering safe, efficient, and well‑coordinated building structures. You’ll design and analyze structural systems - across concrete, steel, masonry, and wood - for projects ranging from small renovations to large, complex facilities, ensuring they meet code requirements, performance expectations, and client needs. Lead Structural Engineering & Project Delivery • Serve as the structural lead and/or project manager to ensure design criteria, budgets, and schedules meet or exceed client expectations., • Prepare plans, specifications, construction documents, bid packages, technical reports, and conduct proactive review of shop drawings and RFIs., • Verify project documentation and close‑out tasks follow company standards., • Contribute to continuous improvement by refining technical standards, best practices, and design processes. Manage Projects & Client Relationships • Manage multiple concurrent, larger-scope, and often complex projects with a focus on quality, efficiency, and client satisfaction., • Develop and manage project schedules, milestones, staffing needs, deliverables, and ongoing project status., • Provide clear, practical engineering recommendations to clients and maintain strong relationships through responsive communication and leadership., • Engage in business development - supporting marketing efforts, maintaining regular contact with key clients and contributing to proposals. Coordinate Across Disciplines • Partner closely with architects, owners, contractors, and internal engineering disciplines to ensure aligned scope, deliverables, and expectations., • Participate in project meetings and represent structural engineering requirements with clarity and confidence., • Support construction administration through timely communication and sound engineering judgment. Mentor & Lead • Mentor junior team members, support knowledge sharing, and help strengthen overall team capability., • Represent the company professionally with clients, industry partners, and key associations., • Step in where needed to support firmwide initiatives and ensure exceptional project delivery. What You’ll Bring, • Bachelor’s degree in civil engineering (with structural emphasis) or related discipline required., • 10+ years’ experience working in structural engineering of buildings. Candidates must be a licensed Professional Engineer (PE) or hold an EIT or Engineering Intern (EI) certification. PE license is preferred., • Experienced in the design and analysis of complex structures with a solid understanding and application of structural engineering principles, practices and concepts., • Ability to navigate and apply national, state and local codes along with American Society of Civil Engineers (ASCE) standards to overall project and individual material designs., • Proficiency with Microsoft Office, Revit, AutoCAD. Working knowledge of MicroStation, Smartsheet, Unanet CRM by Cosential and Deltek Ajera software is a plus., • Proven personnel management skills, leadership qualities and effective mentoring capabilities., • Excellent communication and interpersonal abilities., • Commitment to professional growth (EIT/EI candidates expected to pursue PE licensure)., • U.S. citizenship or valid Green Card. Ready to Make Your Mark? Apply for this opportunity today. At Nelson-Rudie & Associates, we are committed to integrity, collaboration, innovation, and empowering every team member to grow and succeed. If you share our values and want to make a meaningful impact, we encourage you to take the next step. Discover more about our culture, our people, and the difference you can make by visiting nelsonrudie.com.

Job DescriptionDescription: Electric Machinery Company. a division of WEG Electric Corp. Minneapolis, Minnesota Position: Buyer Department: Purchasing Primary Objective of Position: Responsible for purchasing material in our dynamic engineer to order and made to order manufacturing facility with a Customer Driven focus that provides On Time Predictability thru Continuous Improvement. Major Areas of Accountability: • Daily Material Requirement Planning review with executing orders for production materials, MRO items and services., • Works collaboratively with planning and suppliers to resolve delivery issues and develop recovery plans for to support on time delivery to customer., • Interface with other department representatives to determine specific needs, such as technical requirements, or manufacturing requirements., • Processes Engineering Change Order releases for updates to manufacturing and vendors., • Follows up on deliveries, obtains proof of delivery if required and resolves invoicing related issues., • Responsible to manage inventory for assigned materials to the appropriate level for order quantity, safety stock, excess and obsolete inventories, • Attends production meetings., • Provides regular updates on assigned metrics., • Completes other tasks and projects as assigned by the Purchasing Manager, • Ensures tasks are performed according to organizational requirements for quality management and environmental, health and safety standards, policies and procedures., • Minimum 2+ years Planning, Purchasing, Inventory, Manufacturing, or Engineering experience. Bachelor’s degree in a business or technical field a plus., • SAP Materials and Planning experience a plus., • Demonstrates Inventory Management Skills for order quantity, safety stock quality, stocking determination, identifying excess and obsolete inventories., • Excellent communication, computer, and analytical skills required., • Demonstrated organizational and prioritization skills., • Strong attention to detail and the ability to respond to changing priorities required., • Ability to interpret drawings and specifications., • Demonstrates excellent inter-personal, group participation, and group management skills., • Must be a flexible, high-energy individual, able to handle multiple tasks and frequently changing priorities., • Approximately 80% sitting, 20% walking. Must be able to carry 20 pounds unassisted of production order packages around a manufacturing facility., • Physical ability to travel freely within manufacturing and office facilities. This requires climbing stairs and moving over, around, and about shop machinery. Salary: $65k to $70k Will compensate with experience. Position is full-time. Company cannot provide sponsorship for this position Please, no agencies Requirements:

Job Description Growing firm with offices in multiple states is seeking an I & C Designer/Engineer for their team in Minneapolis! Responsibilities: • Responsible for design, development, and implementation of control systems for water/wastewater treatment facilities, • Work closely with multidisciplinary engineering teams to ensure all systems meet the required specifications/quality standards, • Create electrical drawings/schematics using AutoCAD, • Ensure all projects meet safety and quality standards Requirements: • Bachelor’s degree in electrical engineering, automation, or a related field, • 5+ years of experience in designing/implementing control systems, • Proficient in AutoCAD Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description About Us: Det-Tronics is a $200M global technology leader in industrial life safety solutions, specializing in high-end flame and gas detection and automation control systems. As part of Spectrum Safety Solutions with 1,700 employees across 20+ countries we serve mission-critical environments in oil & gas, clean energy, marine, and infrastructure. Backed by Sentinel Capital Partners, we’re driving innovation and growth across our portfolio. The Opportunity Det-Tronics is looking for a skilled Test Engineer in our Systems Engineering Group. In this role you will be responsible for ensuring our systems & assemblies meet Det-Tronics standards during final customer checkout and factory acceptance testing (FAT). • You will be working with Det-Tronics Controllers (Eagle Quantum Premier) and control panels, • Testing is an important step to ensure our life safety systems meet our demanding customers’ needs., • You will be working directly with customers, as well as Engineers, Project Managers and Manufacturing Teams, • Provides design feedback to engineers & customers, • Demonstrates professionalism to our customers, • Builds trust & communication channels between departments, • Leads quality control for Det-Tronics Systems, • Works hand-in-hand with Systems Engineering / Design teams, • Supports our Project Managers in delivering fully-functional equipment ON-TIME and ready for field install Required Qualifications: • High School Diploma / GED., • Able to read low-voltage wiring schematics, • Familiar with Control Panels & Control Panel Design, • Basic computer literacy (Microsoft Office Apps, etc.), • Basic CAD experience (AutoCAD, Visio, etc.), • Trade School diploma or associate degree or bachelor’s degree in engineering, • NICET Training, • OSHA 10 or OSHA 30 Training, • Experience with flame or gas detection / life safety systems, • Experience with Fire Alarm systems or Building Automation Systems, • AutoCAD Electrical experience, • PLC / ladder-logic programming experience, • Low-voltage field technician experience, • Work with a globally respected brand in life safety, • Influence strategic decisions at the executive level, • Drive innovation and transformation in a high-growth environment At Det-Tronics, we believe in taking care of our people. Our comprehensive benefits package includes: • Health & Wellness: Medical, dental, and vision insurance plans with company contributions, • Financial Security: 401(k) retirement plan with company match, life and disability insurance, • Time Off: Generous paid time off (PTO), holidays, and flexible scheduling options, • Professional Growth: Career development programs, training opportunities, and tuition reimbursement, • Employee Support: Employee Assistance Program (EAP), wellness resources, and global mobility support, • Ownership Culture: Participation in our Ownership Program, empowering employees to share in our success Ready to shape the future of industrial safety? Apply now and join us in making every life safe and sound.

Job DescriptionOverview We are seeking a talented and motivated Senior Electrical Engineer to join our dynamic team in the vibrant Minneapolis/St. Paul area. If you are interested please feel free to apply. These are Direct Hire Positions!! Responsibilities • Design, develop, and test electrical systems and components for various projects., • Collaborate with cross-functional teams to ensure project requirements are met., • Conduct feasibility studies and analyze data to support design decisions., • Prepare and review technical documentation, including specifications and reports., • Implement and maintain quality control processes to ensure compliance with industry standards., • Troubleshoot and resolve electrical issues in a timely manner., • Stay updated with the latest industry trends and technologies to enhance project outcomes. Qualifications, • Bachelor's degree in Electrical Engineering or a related field., • Proven experience in electrical design and development., • Strong knowledge of electrical systems, circuit design, and power distribution., • Proficiency in CAD software and other engineering tools., • Excellent analytical and problem-solving skills., • Effective communication and teamwork abilities., • Ability to manage multiple projects and meet deadlines in a fast-paced environment.

Job DescriptionCOMPANY OVERVIEW Project Engineer | Burnsville, MN Applied Engineering, Inc. is seeking a motivated and hardworking individual to join our team in Burnsville, MN as a Project Engineer. You will be part of a group dedicated to high-quality work, value-add solutions, skill development, and career growth. Reporting from our Brooklyn Park office, located just north of Minneapolis and St. Paul, we welcome candidates from the Twin Cities and beyond to apply. Innovation, problem solving, integrity, and collaboration are a few things you'll experience and represent while working with Applied. If you appreciate a challenge, variety, and a quicker pace, then we would like to get to know you better. Award Winning – Employee Owned – Comprehensive Benefits Relocation Assistance – Ownership Opportunity – Continuing Education Support BENEFITS AND PERKS Applied Engineering is a 100% employee-owned engineering and technology consulting company dedicated to providing exceptional talent and technology. We have won numerous awards, including Best Place to Work and Top Place to Intern. Our unique company culture blends top talent, total technology, and absolute adaptability. We offer a career trajectory few others can match, with opportunities to take on roles and projects aligned with your skills and interests. In addition, we offer a comprehensive compensation and benefits package including: • Competitive salary, • 401K retirement plan, • Paid time off and paid holidays, • Tuition reimbursement, • Medical, dental, vision, life, disability, and other insurance options, • Paid overtime Final compensation is based on experience, skills, and alignment with role expectations. JOB SUMMARY As a Engineering Project Manager in Burnsville, MN, you will: • Be a member of the project engineering team, responsible for effective management of assigned projects, • Execute engineering projects according to best practices, on time, within scope, and within budget while contributing to consistent project execution, governance, and reporting practices across the team, • Lead onboarding and training for new project team members; coach and mentor assigned team members in areas including risk management, resource planning and deconfliction, scope management and issue resolution, schedule management and issue resolution, and stakeholder management; promote a high-performance project team, • Report project progress and performance to functional and enterprise leadership per established cadences; facilitate, support, and improve stakeholder management, including communications; ensure consistent use of project status, risk, and issue reporting, • Establish, maintain, and promote use of common project governance practices; create and maintain project management tools for scheduling, resource planning, risk tracking, issue tracking, and reporting in manners consistent with best practices in the project management community, • Contribute to project portfolio reviews and basic scenario analysis related to schedule and resource constraints; work with engineering personnel and cross-functional leaders to balance resources and reduce conflicts across projects, • Collaborate across functions to ensure alignment, leverage capabilities, remove execution barriers, and improve execution effectiveness; contribute to continuous improvement efforts aimed at leveraging prior lessons learned, improving project execution, and institutionalizing generated knowledge, • Work collaboratively with suppliers and Applied partners across the Minneapolis-St.Paul Metro, • Contribute to projects that impact communities in Burnsville, Savage, Apple Valley, Bloomington, Eagan, Lakeville, and Prior Lake, and the greater Twin Cities, • Apply your skills in a dynamic environment that values ownership and innovationQUALIFICATIONS, • Bachelor of Science or higher in an engineering or business-related field strongly preferred, • PMP Certification, • 10+ years leading projects in an engineering, R&D, technology, or product development environment, • Ability to work in cross-functional business environments, • Experience with project scheduling and reporting tools, • Experience operating in Agile, Waterfall, and hybrid project environments, • Understanding of key technologies and processes related to the custom power solution industry strongly preferred, • Experience with Microsoft Planner and Project along with knowledge of AI (Microsoft Copilot or ChatGPT desired, • Experience with Microsoft 365 Suite (Outlook, Word, Excel, PowerPoint, OneNote, Teams, SharePoint).SKILLS AND VALUES, • Capable of working independently and as a team member, • Strong work ethic and unwavering integrity, • Excellent interpersonal skills and a learning mindset, • Curiosity, problem solving, and analytical thinking, • Effective verbal and written communication Applicants must be legally authorized to work in the United States. We regret that we do not offer sponsorship. Applied Engineering is committed to a diverse workforce and is an Equal Opportunity Employer. ID 20261036

Job Description Mechanical Engineer (Hybrid/Remote) Our growing firm is looking for passionate problem-solvers driven to make a real impact: we're hiring a Mechanical Engineer. Engineer the infrastructure that propels commerce, enables a more sustainable impact, elevates municipal services, and creates impressive gathering spaces. At VAA, you'll have unique opportunities to utilize your talents and experience while flexing your problem-solving muscles. The Project Engineer is responsible for leading and/or overseeing preparation of design documents, and project deliverables for industrial and agricultural projects, in a timely and technical-quality appropriate manner, which meets client, contractual and company requirements. Your role: • Perform high quality engineering services using sound analysis and design techniques based on applicable, • Efficiently use appropriate software to complete engineering design and provide clear and concise engineering direction to be included in the project deliverables., • Understand scope, schedules and end-product needs for your role on each assigned, • Provide direction and distribute your work to technicians and Perform a quality review of your work., • Review project documents for coordination with all, • Participate in internal coordination meetings and client coordination, • Prepare design/layout preliminary concepts and accurately communicate the, • Prepare and edit specifications, coordinate with Review shop drawings., • Identify potential additional service items; assist in request for additional, • Provide weekly input on personnel scheduling; assist project manager with balanced weekly workload, • Support project manager in nurturing the client, • Assist in the training of new engineering staff and provide performance feedback as requested; other supervisory responsibilities as requested., • Manage time based on project budget and, • Communicate with clients/contractors regarding RFI's and field, • Perform site visits during design phase to verify existing conditions and identify engineering and coordination, • Potential 10% travel to construction job Your resume must include: • BS in Mechanical or Industrial Engineering (with emphasis in appropriate discipline for position), • 5 -10 years engineering experience, • Prefer PE Certification, • Strong engineering analysis and judgment combined with a basic knowledge of applicable codes, • Experience with the design of engineering systems including steam, cooling/chilled and heating water, and compressed air., • Experience with ASME piping and tank design standards and specifications., • Understands hand methods for approximate engineering calculations, • Engineering software proficiency, • Specialty design and construction knowledge / experience, • Working knowledge of Microsoft Office and other appropriate design software, • Preferred Working knowledge of AutoCad, Revit, Plant 3D Starting Annual Salary Range: $85,000 - $105,000. A variety of factors are considered when determining an offer including, but not limited to, market data, geographic location, experience, and specialized skills. Benefits: Health, dental, vision, life insurance, profit-sharing, 401(k), discretionary bonus program, paid leave, and more! Get to Know VAA VAA is an Engineering, Planning and Design firm specializing in commercial projects, bulk commodity-handling facilities, and structures for value-added processing, manufacturing and distribution. VAA is one of the industry's leading firms, combining nearly a half-century of excellence with a vibrant, future-focused energy. We serve a diverse portfolio of clients, ranging from multinational corporations to local municipalities to individual farms and businesses. Hear first-hand what it's like to work here, the range of opportunities you can find and the wealth of resources that will support you - both professionally and personally: Why VAA? • It's not all calcs and CAD around here. Join your peers for a chili cookoff or homebrew tasting... get an opportunity to dunk the CEO during our annual Community Caring Campaign. Take advantage of charitable PTO to volunteer for organizations you're passionate about. At VAA, we're committed to building community from within and making a difference in the communities where we live and work., • Support for life/work balance: flexible schedule options, onsite gym, Employee Assistance Program, and fun opportunities for friendly competition, • Ongoing professional development, including mentoring, online learning and tuition reimbursement., • An award-winning workplace, recognized by USA Today as a national 2024 and 2025 Top Workplace USA and by the Star Tribune as one of Minnesota's Top 200 Workplaces (2022/2023/2024/2025). Let's get growing™ Your career. Your talents. Your network. Apply today! Engineering: #VAA #Engineer #Engineering #MechanicalEngineer VAA is an Equal Employment Opportunity/Vets/Disability employer Job Posted by ApplicantPro

Job Description Bolton & Menk has an exciting opportunity for a Senior Project Engineer, PE to join our Transportation team in our Oakdale office. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Southeast, Midwest, and beyond. In this role, you will support and lead design teams on transportation planning, design and construction reviews in connection with a wide range of multi-disciplined projects involving various aspects of highway/roadway/drainage design, safety studies, multi-modal roadway planning, transit design, site civil design, and design reviews. This role will work closely with our Project Managers with current project requirements and planning future projects, as well as mentoring and developing a team to help strengthen their transportation knowledge and skills. We are looking for candidates who possess a high capacity for self-motivation and can apply engineering and transportation knowledge to a variety of projects. In addition, you must be able to develop and maintain strong relationships with clients and staff from various agencies. What You Will Be Doing: • Performs detailed design computations, • Performs preliminary layout, modeling and design, • Researches and prepares rough drafts of preliminary reports and feasibility studies, • Bachelor's degree in Civil, Water Resources or Biosystems Engineering from an accredited college or university, • Licensed Professional Engineer (P.E.), • 10+ years' progressive experience in the civil engineering field, including hydraulic and hydrologic modeling, • Experience in plan and specification development with construction contract administration, • Proficiency in AutoCAD and/or Microstation, GeoPAK Drainage, HydroCAD, P8 and GIS Salary Range: $115,000 - $140,000 depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s sex or other status protected by local, state, and/or federal law. Supporting Our Employees There’s life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: • Competitive compensation plan - overtime compensation available to most employees, • Discretionary bonuses available to most employees, • ESOP - Employee ownership (ESOP); 100% company-paid contributions, • 401(k) Match Program, • Paid time off (PTO), • Volunteer Time Off (VTO), • Six paid company holidays, • Two floating personal holidays for events that are important in your life, • Tuition reimbursement, • Parental leave, • Short term and Long-term disability, • Dependent care reimbursement, • Employee assistance program, • Health insurance, • Flexible spending account, • Life insurance Bolton & Menk, Inc. specializes in providing community infrastructure solutions. Since 1949, we have been committed to improving quality of life through engineering excellence and client satisfaction. From advocating for our communities to designing their dreams to finding funding; we take pride in our work because we live in these same communities. Today, Bolton & Menk has more than 1,000 employees throughout more than 40 locations in Minnesota, Iowa, North Dakota, Wisconsin, Colorado, North Carolina and South Carolina providing services to more than 400 communities and agencies. Learn more about our history here: OUR BENEFITS At Bolton & Menk, we value our people and provide an exceptional Total Compensation and Benefits Package to protect our most valuable asset. We are committed to the well-being of our employees and their families. Perks of being a Bolton & Menk employee include peace of mind with our benefits package and competitive compensation plan, flexible schedules, and career development opportunities. Learn more here: We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required after any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets.

Job DescriptionJoin A Team Where Your Ideas Shape The Future At Nelson Rudie, we elevate the built environment - together. We’re a consulting engineering firm known for practical, high-quality solutions and a culture built on integrity, teamwork, and problem-solving. If you’re motivated by purposeful work, strong collaboration, and the opportunity to shape buildings that stand the test of time, you’ll feel right at home here. Why You’ll Love Working Here You won’t just produce drawings - you’ll influence project outcomes, mentor others, and bring buildings to life. Your expertise will help shape the performance, comfort, and longevity of the built environment for years to come. • Employee-Owned: Be part of a 100% employee-owned firm with a legacy of excellence since 1976., • Competitive Benefits: Medical, dental, vision, life insurance, ESOP, 401(k), bonus program, and flexible hours., • Inclusive Culture: Fast-paced, energetic, and supportive environment where every voice matters., • Work-Life Balance: Flexible schedules, hybrid work arrangements, and commitment to your well-being., • Impact: Work on diverse projects nationwide, making a real difference in communities., • Opportunities to Grow: Opportunity to deepen your technical expertise and expand your leadership impact. Lead Electrical Engineering & Project Delivery • Serve as the electrical lead to ensure design criteria, budgets, and schedules meet or exceed client expectations., • Prepare plans, specifications, construction documents, bid packages, technical reports, and conduct proactive review of shop drawings and RFIs., • Verify project documentation and close‑out tasks follow company standards., • Manage multiple concurrent, larger-scope, and often complex projects with a focus on quality, efficiency, and client satisfaction., • Develop and manage project schedules, milestones, staffing needs, deliverables, and ongoing project status., • Provide clear, practical engineering recommendations to clients and maintain strong relationships through responsive communication and leadership., • Partner closely with architects, owners, contractors, and internal engineering disciplines to ensure aligned scope, deliverables, and expectations., • Participate in project meetings and represent mechanical engineering requirements with clarity and confidence., • Mentor junior team members, support knowledge sharing, and help strengthen overall team capability., • Represent the company professionally with clients, industry partners, and key associations., • Step in where needed to support firmwide initiatives and ensure exceptional project delivery.What You’ll Bring, • Bachelor’s degree in Electrical Engineering or related field., • 5+ years’ experience in electrical engineering (PE, EIT, or EI certification required)., • Experienced in the design and analysis of complex electrical systems (e.g., controls, instrumentation, SCADA systems, power distribution systems) with a solid understanding and application of engineering principles, practices, and concepts. Working knowledge of remote telemetry systems and SCADA network communications is a plus., • Working knowledge of Microsoft Office, Revit, AutoCAD and current electrical engineering software (e.g., Visual Lighting, AGI 32, SKM Power*Tools, Lightstanza). Working knowledge of MicroStation, Smartsheet, Unanet CRM by Cosential, and Deltek Ajera software is a plus. Ability to maintain skill levels within the changing technology environment., • Ability to apply national, state and local codes including NFPA (including NFPA 70 (NEC)), ASHRAE and IECC., • Strong leadership, mentoring, and decision-making skills., • Excellent communication and interpersonal abilities., • Commitment to professional growth (EIT/EI candidates expected to pursue PE licensure). Apply for this opportunity today. At Nelson-Rudie & Associates, we are committed to integrity, collaboration, innovation, and empowering every team member to grow and succeed. If you share our values and want to make a meaningful impact, we encourage you to take the next step. Discover more about our culture, our people, and the difference you can make by visiting nelsonrudie.com.

Job Description Overview Join a dynamic team as an Automation Controls Engineer, where you will play a crucial role in advancing manufacturing processes through innovative automation solutions. This position offers the opportunity to work on a diverse range of projects, from designing small custom machines to implementing full-scale automated assembly lines across various industries including medical, aerospace, and high-end industrial sectors. Key Responsibilities • Project Support: Collaborate within project teams to ensure successful project execution, including start-up, commissioning, and qualification of automation systems., • Technical Expertise: Provide subject matter expertise in electrical design, PLC and HMI programming using tools such as Studio 5000, Optix, and FactoryTalk View, extending from machine level to SCADA and Factory System Integration., • Troubleshooting & Improvement: Lead efforts in process troubleshooting, continuous improvement projects, and offer system administration support., • Standard Development: Develop and implement standards, and deliver expert advice to management to support operational efficiency., • Communication: Ensure effective verbal and written communication within the team and with stakeholders to facilitate project success., • Proficiency in Allen Bradley PLC/HMI design, configuration, programming, troubleshooting, and maintenance., • Experience with Studio 5000, Optix Core, FactoryTalk View, and Ignition SCADA., • Expertise in PLC/PC-based electrical control panel design and industrial networking., • Bachelor’s degree in Engineering, Automation, Computer, Industrial, or Manufacturing., • Minimum of 5 years of direct experience in automation engineering, programming, and validation. #hc226257

Job Description We are currently hiring an Inside Commercial Sales Representative to work out of Plymouth, MN, location. This position is best suited for an organized, responsible, and detail-oriented individual who is looking for a career within a well-established company. WHAT DOES THIS POSITION DO? As an Inside Commercial Sales Representative, you will serve as the main point of contact for commercial customers, which includes finalizing sales, resolving customer issues, and providing ongoing services to current customers. In this role, you will collaborate with a team of like-minded representatives to enhance the customer service function, complete sales, and exceed customer expectations. This position will be supporting the Minnesota market. Essential Functions: • Identify solutions that we sell that meet the project requirements and propose them in a quote., • Communicate our proposals with customers by a deadline., • Create and send submittals for customer approval., • Manage orders within construction timeframes., • Keep organized quotation files (digital and/or physical), • Handle incoming calls from customers., • Participate in commercial sales meetings., • Give support to outside sales staff and others as required., • Obtain plans and specifications for projects to be estimated., • "Take off" commercial equipment and controls form project plan drawings and specifications., • Clarify specifications with the specifying engineer, when necessary., • 2-year associate degree in HVAC field or the equivalent work experience in an HVAC related field including sales, distribution, manufacturing, or installation of HVAC equipment highly preferred, • Alternate requirement of 4-year bachelor's degree in a technical field may be considered., • An understanding of thermodynamic fundamentals and principles, • Able to read and understand blueprints and comprehend written specifications preferred., • Customer service experience, • Good communication techniques with customers & co-workers, • Strong analytical and problem-solving skills, • Great time management skills, • Great attention to detail, • Ability to work well with others within a team environment., • Honesty and good ethical practices, • Proficiency in Microsoft Office and other commonly used software., • Competitive Pay Based on Experience, • Comprehensive Benefits Package for Full-time Employees, • Flexible Work Schedules - Summer Flex Hours, First Shift, No Weekends, • Paid Time Off - Sick, Vacation, Personal, Jury Duty & Holidays, • Wellness Challenges, Incentives, and Coaching, • Retirement Plan Options w/a Company Match This is your opportunity to join Auer team! Auer Steel & Heating Supply Co. is a wholesale distributor of HVAC equipment and supplies. Known for our customer service and quality products, Auer Steel has been operating since 1940. Auer Steel & Heating Supply Company is an Equal Opportunity Employer dedicated to promoting a culturally diverse workforce. Job Posted by ApplicantPro

Bolton & Menk has an exciting opportunity for a Project Engineer, PE to join our Municipal team in our Oakdale office. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. We are looking to add a Project Engineer, PE who will help foster our mission that All People Should Live in Safe, Sustainable and Beautiful Communities! What You Will Be Doing: • Responsible for the management planning, scheduling and performance of multiple engineering projects and personnel, both design and construction, • Work closely with Project Managers in understanding client needs and expectations., • Review and/or prepare preliminary reports and feasibility studies, • Read and interpret engineering plans, specifications and reports, • Provides technical advice regarding design, construction or modification and repairs to clients, contractors and other staff members, • May assist with business development activities (client needs, research, proposals, etc.), • Coordinate construction administration and monitor documentation requirements with field staff What We Are Looking For: • Bachelor's degree in Civil Engineering from an accredited college or university, • Licensed Professional Engineer in the State of Minnesota, • 4+ years' progressive experience in the civil engineering field, including experience working with municipal infrastructure preferred, • Experience in plan and specification development with construction contract administration, • AutoCAD Civil 3D proficiency, • Knowledge of MnDOT requirements Salary Range: $68,000 - $120,000 depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant's sex or other status protected by local, state, and/or federal law. Supporting Our Employees There's life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: * • Competitive compensation plan - overtime compensation available to most employees, • Discretionary bonuses available to most employees, • ESOP - Employee ownership (ESOP); 100% company-paid contributions, • 401(k) Match Program, • Paid time off (PTO), • Volunteer Time Off (VTO), • Six paid company holidays, • Two floating personal holidays for events that are important in your life, • Tuition reimbursement, • Parental leave, • Short term and Long-term disability, • Dependent care reimbursement, • Employee assistance program, • Health insurance, • Flexible spending account, • Life insurance OUR BENEFITS At Bolton & Menk, we value our people and provide an exceptional Total Compensation and Benefits Package to protect our most valuable asset. We are committed to the well-being of our employees and their families. Perks of being a Bolton & Menk employee include peace of mind with our benefits package and competitive compensation plan, flexible schedules, and career development opportunities. Learn more here: ___ We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required before any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets. Licenses & CertificationsProfessional Engineer (required) Skills • CIVIL3D (preferred), • MicroStation (preferred), • REVIT (preferred) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description: WHY CHOOSE US? Joining The American Red Cross is like nothing else - it's as much something you feel as something you do. You become a vital part of the world's largest humanitarian network. Joining a team of welcoming individuals who are exceptional, yet unassuming. Diverse, yet uncompromising in unity. You grow your career within a movement that matters, where success is measured in people helped, communities made whole, and individuals equipped to never stop changing lives and situations for the better. When you choose to be a force for good, you'll have mentors who empower your growth along a purposeful career path. You align your life's work with an ongoing mission that's bigger than all of us. As you care for others, you're cared for with competitive compensation and benefits. You join a community that respects who you are away from work as much as what you do while at work. WHAT YOU NEED TO KNOW ABOUT THE JOB: The Enterprise Data & Analytics Team is a full-stack Data Engineering team supporting mission-transforming work through data at the American Red Cross. We are seeking a Lead Data Engineer for one our highly dynamic product teams to help do this exciting work! As a Lead Data Engineer, you will be part of our team that is modernizing and transforming our data and reporting capabilities across multiple verticals by implementing a new modernized data architecture and technical stack. The Lead Data Engineer will help develop, test, maintain and support an enterprise data warehouse system and corresponding data and will be responsible for database design and implementation of agreed upon standards. This position requires an innovative engineer who is passionate about data, data quality & automation. The ideal candidate will possess strong data warehousing experience and the ability to develop and deploy scalable data pipelines that make data management and analytics/reporting faster, more insightful, and more efficient. The work location is remote with in-person meetings as necessary. Preference for candidate to work an East coast schedule for coordination with off-shore resources and ability to come into a Red Cross office as necessary. This position also requires the ability to work a rotational weekend support schedule once every 8 weeks. WHERE YOUR CAREER IS A FORCE FOR GOOD (Key Responsibilities): • Collaborate with analytics and business teams to improve data models that feed business intelligence tools, increasing data accessibility and fostering data-driven decision making across the organization., • Build and implement scalable solutions that align to our data governance standards and architectural roadmap for data integrations, data storage, reporting, and analytic solutions., • Design, develop and test data integration solutions. Write, automate and document unit/integration/functional tests., • Manage automated deployments using Git pipelines, ensuring code changes are efficiently version-controlled and deployed., • Collaborate with multiple teams to streamline deployment workflows, monitor and troubleshoot pipelines for reliability and performance., • Perform data analysis required to troubleshoot data-related issues by building a data quality framework and assist in the resolution of data issues., • Serve as tech lead by mentoring less experienced members of the team through code reviews, pair programming and similar hands-on interactions. Scope: Individual contributor that works under limited supervision with mentorship responsibilites. Apply subject matter knowledge. Capacity to understand specific needs or requirements to apply skills/knowledge. Qualified candidates must be authorized to work in the United States. The American Red Cross does not sponsor employment visas. WHAT YOU NEED TO SUCCEED (required/minimum qualifications): • Education*: 4-year college degree in Computer Science, Engineering, Mathematics, or related technical field or equivalent combination of education and experience., • 10 years of relevant work experience in data engineering, business intelligence or related field., • Combination of candidate's education and general experience satisfies requirements so long as the total years equate to description's minimum education and general experience years combined (Management experience cannot be substituted). +++++++++++++++++++++++++++++ PAY INFORMATION: The annual salary range for this position is $140K - $155K. We do not offer an annual bonus for this role. Note that American Red Cross salaries are aligned to the specific geographic location in which the work is primarily performed. Other factors that may be used to determine your actual salary may include your specific skills, how many years of experience you have and comparison to other employees already in this role. We will review specific salary information at the time of phone screening based upon your location & experience. This job will be posted for a minimum of five business days and extended if the applicant pool needs to be expanded BENEFITS FOR YOU: As a mission-based organization, we believe our team needs great support to do great work. Our comprehensive package includes: • Medical, Dental Vision plans, • Health Spending Accounts & Flexible Spending Accounts, • PTO: Starting at 19 days a year; based on type of job and tenure, • Holidays: 11 paid holidays comprised of six core holidays and five floating holidays, • 401K with up to 6% match, • Paid Family Leave, • Employee Assistance, • Disability and Insurance: Short + Long Term, • Service Awards and recognition The American Red Cross is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, San Diego Fair Chance Ordinance, the California Fair Chance Act and any other applicable state and local laws. AmeriCorps, the federal agency that brings people together through service, and its partners - the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance - launched Employers of National Service to connect national service alumni with opportunities in the workforce.American Red Cross is proud to be an ___ partner and share our employment opportunities with the network of organizations. Interested in Volunteering? Visit___ to learn more, including our most-needed volunteer positions. To view the EEOC Summary of Rights, click here: ___

Description Leidos is seeking a Lead Distribution Engineer in the Minneapolis, MN area who is passionate about electric utility design engineering. We're looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! This position is hybrid in nature, where 3 days/week are spent working in our office, collaborating with internal teams, and 2 days/week can be spent working remotely. As a Lead Distribution Engineer, you can expect to: * Lead the development of electrical distribution work packages; Perform engineering design and analysis; potentially work on programmatic/ capital/ reliability design (i.e. 3rd party attachment/ Make Ready, overloaded transformers, reconductor, voltage conversion, DG, FLISR, underground, etc. designs) * Be responsible for QAQC tasks on your assigned team; You will play a role in quality reviews of your team's designs prior to submittals for client projects * Review engineering design packages with clients; Review and organize existing program work * Perform scope analysis of work assigned and maintain schedule adherence to advocate client priorities * Interact directly with clients on a frequent, as-needed basis * Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met. * Coordinate conflicting utilities and other field engineering design requirements; Assist with work permit development, easements, and ROW applications * Be comfortable in both a field and office setting; the role could possibly require some customer-site visits to collect field data that will assist in developing work packages * In the future, you can expect to play a role in the hiring process for the future of your team What Sets You Apart (Background Requirements): * 4+ years of relevant experience working electric distribution projects in a consulting environment for electric utilities or working directly at an electric utility * Bachelor's degree in an Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; Additional relevant experience can be considered in lieu of engineering-specific bachelor's degree * Experience and demonstrated proficiency with the National Electric Safety Code (NESC) * Experience with engineering design quality control * Familiarity with Pole Loading software (O-Calc, Pole Foreman, etc) and distribution pole analysis * Ability to utilize a personal vehicle,as some customer-related travel could be anticipated(Job-related travel will be reimbursed at IRS-approved rates) * Willingness to perform both field and office work; Ability to work in outdoor environments on occasion; The role may require customer-site visits to collect field data that will assist in developing work packages * Candidates should possess valid U.S. driver's license Preferred Qualifications: * EIT Certification * Previous QAQC experience * Experience providing estimated costs, development of a BOM, calculating the CIAC * Demonstrated history of Customer Interaction * Proven experience and proficiency with STORMS software and GIS is preferred * Prior Leadership experience is preferred At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. April 16, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Electric Machinery Company. a division of WEG Electric Corp. Minneapolis, Minnesota Position: Buyer Department: Purchasing Primary Objective of Position: Responsible for purchasing material in our dynamic engineer to order and made to order manufacturing facility with a Customer Driven focus that provides On Time Predictability thru Continuous Improvement. Major Areas of Accountability: • Daily Material Requirement Planning review with executing orders for production materials, MRO items and services., • Works collaboratively with planning and suppliers to resolve delivery issues and develop recovery plans for to support on time delivery to customer., • Interface with other department representatives to determine specific needs, such as technical requirements, or manufacturing requirements., • Processes Engineering Change Order releases for updates to manufacturing and vendors., • Follows up on deliveries, obtains proof of delivery if required and resolves invoicing related issues., • Responsible to manage inventory for assigned materials to the appropriate level for order quantity, safety stock, excess and obsolete inventories, • Attends production meetings., • Provides regular updates on assigned metrics., • Completes other tasks and projects as assigned by the Purchasing Manager, • Ensures tasks are performed according to organizational requirements for quality management and environmental, health and safety standards, policies and procedures., • Maintains data and prepares reports using SAP and Microsoft office software. Knowledge/Skills/Abilities: • Minimum 2+ years Planning, Purchasing, Inventory, Manufacturing, or Engineering experience. Bachelor’s degree in a business or technical field a plus., • SAP Materials and Planning experience a plus., • Demonstrates Inventory Management Skills for order quantity, safety stock quality, stocking determination, identifying excess and obsolete inventories., • Excellent communication, computer, and analytical skills required., • Demonstrated organizational and prioritization skills., • Strong attention to detail and the ability to respond to changing priorities required., • Ability to interpret drawings and specifications., • Demonstrates excellent inter-personal, group participation, and group management skills., • Must be a flexible, high-energy individual, able to handle multiple tasks and frequently changing priorities., • Experience in Microsoft Office Suite products with a focus on Excel preferred. Physical Requirements • Approximately 80% sitting, 20% walking. Must be able to carry 20 pounds unassisted of production order packages around a manufacturing facility., • Physical ability to travel freely within manufacturing and office facilities. This requires climbing stairs and moving over, around, and about shop machinery. Salary: $65k to $70k Will compensate with experience. Position is full-time. Company cannot provide sponsorship for this position Please, no agencies

Job Description SOMIC Packaging is a global leader in packaging automation, committed to delivering high-quality machines to our customers. We are expanding our U.S. operations and investing in local after sales and support of our advanced packaging equipment. Join a dynamic team where your customer focus, priority setting, creativity, and problem-solving abilities are valued. Customer Support & Spare Parts Coordination • Serve as primary contact for customers regarding spare parts and standard aftermarket services., • Support customer parts orders, including parts identification, drawing review, and order processing., • Prepare spare parts quotes and process incoming customer purchase orders., • Coordinate with Engineering to research parts, alternates, and solutions for obsolete or soon‑to‑be obsolete components in accordance with approved engineering change and obsolescence procedures; support creation and distribution of technical bulletins., • Maintain accurate files, records, logs, and ERP/AMS data related to parts sales, quotes, and service activities, • Review order backlog reports, open quotes, and delivery status to ensure timely follow‑up and customer communication., • Process customer purchase orders through customer portals as required (e.g., key customer portals). Requirements • High School Diploma or GED required, • Associate degree or equivalent experience in Business, Operations, Supply Chain, or a related field or equivalent combination of education and relevant experience, • 3+ years of experience in customer service, after-market sales support, parts coordination, service administration, or order management, preferably in an industrial, OEM, or manufacturing environment., • Experience supporting the full order lifecycle, including quoting, purchase‑order processing, customer follow‑up, and delivery coordination required., • Flexible working hours, • Pleasant working atmosphere, • 16 Days of annual PTO, • 10 Paid Company Holidays, • Medical, Dental and Vision, • Health Spending Plan (with Employer contributions), • Employer paid Life/AD&D, Short & Long Term Disability, • Voluntary Life/AD&D – Employee, Spouse, and Children, • 401K, • Safety Glasses Allowance (prescription and non-prescription), • Safety Boots Allowance, • Employee Referral Incentives Why Join SOMIC Packaging? • Hands-on work with advanced packaging machinery and automation technology, • Opportunity to learn and grow in a fast-expanding US facility, • Collaborative and innovative team environment, • Competitive hourly wage with potential growth opportunities, • Contribute to a company invested in quality, innovation, and customer satisfaction Growth opportunities. Relaxed and fun environment. German engineering and US service and ingenuity. This is SOMIC. Engineered to perform. EEO employer.

Ames Construction has been building America for more than 60 years, and the people who work here are thereasonwe continue to succeed. We are a full-service,heavy civil and industrial contractorbuildingcritical infrastructure, includinghighways, bridges, mines,dams,rail, andmore.Ourteams take on challenging projects that keep communities safe, supply chainsmoving,and the country connected. At Ames, we areFueled by FamilyandDriven by Ownership. That means welook outfor one another, take pride in what we build, and take responsibility for our actions, our results, and the long-term health of the company. Guided by our core values ofPeople, Team, Our Bond, Persistence, and Vision, we do what we say we will do, push throughchallengesand deliver workwe'reproud of. When you join Ames,you'rejoining a company built for long-term success-where skilled people, strong teams,and disciplined execution come together to build careers and a better future. Please note: Visa sponsorship is not available at this time for this position. The Field Engineer is responsible for managing large and complex construction work at the project site to ensure operations run safely, smoothly, and effectively. This position has a wide range of job responsibilities, depending on the area of specialization. These duties might include working on road, bridge, building, steel structures, or other large projects. This position is classified as "safety-sensitive." Essential Functions • Designs temporary structures used during construction with emphasis on safety considerations, • Inspects installed equipment and technologies. Solves issues that may arise., • Directs foremen or workers on-site, • Conducts research and accurately reports on project status, • Performs quality control inspections and checks work for compliance with contract documents, • Verifies proper materials are used, and that the installations meet project timelines and requirements, • Affirms safety compliance and enforces proper protocols and PPE on site, • May oversee project budget and communications Qualifications • A Bachelor's degree in Engineering or closely related field, • A minimum of one (1) year of previous experience as a field engineer or similar role, • Well-versed in technical aspects of field projects, including machinery, equipment, and construction processes, • Thorough understanding of safety guidelines (OSHA statutes), • Attention to detail, • Outstanding communication skills, • An analytical mind and strong problem-solving ability, • Ability to work in adverse weather and occasional overtime and weekends Working Conditions • Travel - This role will be expected to travel to project locations, sometimes nationally, • Construction site environment - physical ability to stand, walk, crawl, bend, reach and climb. May be exposed to high noise levels., • Compensation: $55,000-$75,000 Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The people and technology that power our Group business work is the Employee Benefit Solutions Technology (EBST) organization within Enterprise Technology. As a member of the COMET (Client Onboarding and Medical Underwriting Engineering Team), you will contribute to the development and support of systems that enable client onboarding, medical underwriting workflows, and employee benefits administration. The COMET team supports business critical platforms used daily by underwriters and client implementation teams. These systems must remain stable, scalable, and reliable, particularly during peak periods such as Open Enrollment. This role is well suited for an engineer early in their career who has strong technical aptitude, a solid foundation in software engineering fundamentals, and an interest in growing their development skills, including development in a low-code environment such as the Pega Platform. Key Responsibilities • Configure and enhance workflows, rules, and user interface components within a lowcode workflow platform, • Support & enhance Javabased systems, • Assist with troubleshooting, defect resolution, and delivering enhancements in existing application(s), under guidance from experienced engineers, • Learn how business processes, workflow design, and data quality impact client onboarding and medical underwriting outcomes, • Collaborate with product owners, analysts, quality engineers, and other developers to deliver incremental improvements Required Qualifications • Strong technical aptitude with a foundation in software engineering or computer science concepts (through education or handson experience), • Exposure to Java or objectoriented programming, with interest in deepening handson development skills over time, • Willingness and ability to learn new technologies quickly, including lowcode development platforms such as Pega, • Basic understanding of how enterprise applications support business processes and integrate with other systems, • Ability to troubleshoot issues, follow guidance, and incorporate feedback through collaboration and code reviews, • Strong written and verbal communication skills, curiosity, and a growth mindset in a complex domain Preferred Qualifications • Pega CSA certification or equivalent handson experience, • Exposure to frontend or fullstack development, with interest in expanding these skills as applications evolve, • Exposure to SQL or relational databases for basic data investigation, • Familiarity with Agile/Scrum development environments Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you'rewithina commutabledistance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules. Preferred Skills: Agile Methodology, Application Integrations, Cloud Computing, Programming Languages, Quality Assurance (QA), Software Implementations, Technical Knowledge The estimated base pay range for this job is: $55,700.00 - $103,400.00 Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team. Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here: Paid time off: * We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian. * Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave. * Holidays: Securian provides nine company paid holidays. Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service. Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage. Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you. Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including: * Mental Wellness and Disability * Pride at Securian Financial * Securian Young Professionals Network * Securian Multicultural Network * Securian Women and Allies Network * Servicemember Associate Resource Group For more information regarding Securian's benefits, please review our ___. This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions. Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone 651-655-5522 (voice), or 711 (Relay/TTY). To view our privacy statement click ___ To view our legal statement click ___

Lead Instrumentation & Controls Engineer - Position and Responsibilities As a Lead Instrumentation & Controls Engineer with Middough, you will collect and prepare data/information and perform detailed engineering calculations. In this role, you will perform basic engineering design and provide analysis on complex or unique problems for review and approval by senior department personnel. The Lead I&C Engineer demonstrates technical/professional growth by maintaining active membership in professional organizations. Responsibilities include, but are not limited to, the following: • Work on multiple projects of various sizes at the same time, as lead design engineer or as member of a larger design team., • Collect and prepare data/information, perform detailed engineering calculations, and write formal engineering/technical reports., • Develop technical specifications & data sheets, perform technical evaluation of bids, and recommend best value design which meets client requirements for operability, reliability, maintainability, and safety., • Prepare project documentation and deliverables including but not limited to scopes of work, bills of material, instrument and IO lists, instrument datasheets, cable, and conduit schedules., • Lead field work by checking installations and problem-solving activities., • Perform calculation checking and vendor drawing reviews., • Serve as Project Lead for select single-discipline projects by estimating work hours, developing scope of work, making staffing recommendations, and checking drawings., • Interact with other departments and suppliers to obtain pertinent information., • Manage the scope of the project work, address scope and work changes, adjust the project deliverables as necessary, and complete the project work based on the budget and scheduled time frame., • Present project information internally to colleagues and externally to clients., • Work within given budget and schedule parameters, as well as develop engineering internal time estimates for engineering and design. Education, Experience and Skills The successful candidate will possess the following: • Engineering Technology degree or Bachelor of Science in an Engineering discipline required., • 8+ years of engineering and design experiences in Instrumentation & Controls or Electrical., • Strong skill set in understanding PFD's, P&ID's, and Cause and Effect matrices., • Understanding of NEC/ISA standards., • EIT certification is a plus., • Working knowledge of AutoCAD., • Working knowledge of Microsoft Office products., • Strong analytical, problem-solving, and attention to detail abilities., • Ability to multitask and organize for project efficiency., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, twist and bend, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel Insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Flexible Start Times, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

BIGOS MANAGEMENT IS PROUD TO BE NAMED A STAR TRIBUNE TOP WORKPLACE IN 2025 FOR THE 11th TIME LOCATION The Whit & Ridgewood Arches - Minneapolis, MN (164 Units) HOURS Monday - Friday 8:00am-4:30pm Limited nights and weekends for on-call rotation. Scheduled dates and hours subject to change at employer discretion PAY, PERKS, AND BENEFITS Hiring Pay Range: $23.00 - $27.00/hour • Competitive benefit package, including HSA employer contribution, starting 1stof the month after hire, • Eligible for Monthly Renewal Bonuses, • 401(k) Plan with employer match, • Ten paid holidays, no waiting period to receive holiday pay, • Generous Paid Time Off (PTO) and rollover options, • Volunteer Time Off (VTO), along with additional company sponsored volunteer opportunities, • Company paid benefits including Life Insurance, Short Term and Long Term Disability, • Employee Assistance Program (EAP), • Educational Assistance options, • Rent discount SUMMARY The Maintenance Technician III is responsible for performing a variety of related duties including equipment installation troubleshooting, repairs, and preventative maintenance in order to ensure the property and grounds are meeting the company's established standards and any applicable laws. The Maintenance Technician III works directly with the Property Manager and/or Maintenance Supervisor to ensure that all vacated apartments are made "rent-ready", work orders are completed as quickly as possible, and all common repairs (such as touch-up painting and fixture replacement, etc.) are identified and fixed quickly. Supports our employee-first culture and exemplifies our core values of relationships, development, quality, and responsibility. To perform this job successfully, an individual must be able to perform each duty satisfactorily. The requirements listed below are representative of the knowledge, skill and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. ESSENTIAL JOB DUTIES • Complete all maintenance work order requests, • Monitor and maintain all building systems (HVAC, Plumbing, Boilers, etc.) and perform needed repairs as assigned, • Assist the Property Manager in completing unit-to-unit inspections, • Perform all site-level preventative maintenance duties assigned by the Zone Building Engineer or Property Manager, • Communicate with Zone Building Engineer and the Maintenance Technician I regarding major site repairs, remodels, and capital projects and work with them directly, when needed, • Work collaboratively with vendor teams on identified maintenance projects, • Work with Property Manager and peer group to maintain an adequate inventory of hand tools, parts, and supplies in order to maintain a complete workshop area, • Responsible for alerting the Property Manager to any unusual circumstances or high priority issues that need immediate attention, • Perform groundskeeping tasks (as needed, based on needs of property), • Responsible for removal of snow from site walkways and driveways during the winter months, • Maintain positive and professional manner with all residents, vendors, and the public, • Attend relevant training courses and ensure all required certifications are current, • Comply with all safety program requirements and work to promote safety in the workplace, • Responsible for rotating standby support and will respond to emergency calls in a timely manner Education and Experience: • High school diploma or GED required, • AA degree or certification in mechanical, HVAC, electrical or industrial maintenance (preferred), • 1+ years' experience as a Maintenance Technician in a residential apartment setting or equivalent experience, • Knowledge and on-the-job experience in the areas of plumbing, electrical, HVAC, refrigeration, appliance repair, building key systems, lawn irrigation systems, and pool and sauna operations, • Requires a Certified Pool Operators License, Special Boiler's License, and Type II Refrigerant Certification (within 6 months of hire), • Fluent in English and skilled in oral and written communication, • Ability to use tact, diplomacy and a clear, courteous manner when dealing with co-workers and the public, • Decision-making, problem solving, and time management skills, • Ability to handle multiple projects or tasks simultaneously with self-direction, • Ability to work collaboratively in a team environment Must be able to work in a physically demanding environment. Frequent kneeling, lifting, pushing, pulling and moving through-out day. Regular lifting of more than 20 lbs. and frequent lifting of up to 80 lbs. with assistance. May encounter heights, ladders, uneven walking surface, stairs, confined spaces, dust, gas fumes from power equipment and noise. Exposed to external weather conditions, drafts and interior temperature changes. Will regularly handle supplies and tools with sharp edges. Must be able to quickly and easily navigate the property/building as required to meet the job functions, including climbing stairs and walking the hallways and common areas. Personal Protective Equipment: Safety gloves, safety eyewear, ear plugs, Yaktrax, lockout/tagout kit Work Environment: On property, property grounds, apartment units, roof tops Required Tools: Hand Tools: Hammer, Screwdriver (Phillips and Slotted), Crescent Wrench, Channellock Pliers, Pipe Wrench, Allen Wrench, Utility Knife, Flashlight, Hacksaw, Nut Drive Set, " Socket Set, Set of Star Bits, Wire Stripper, Torpedo level, Inspection Mirror Power Tools: Cordless Drill Measuring Devices: Tape Measure, GFI Receptacle Tester, Handheld Infrared/Laser Thermometer, Basic Multimeter

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! We are looking for a Substation Protection & Control Engineer to join our team. As a Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects. * Fully Remote!- Work from where you are! * Candidates must located in the Denver, CO or Minneapolis, MN area. * Must be willing to travel to customer sites. Additional Offerings: * Sign on Bonuses available! * Relocation Assistance available! Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: * Engineer in Training Certificate (EIT). * Professional Engineer License (PE). * Project Management Professional (PMP). * Technical & Non-Technical Training Opportunities. * Leadership Opportunities. * Mentorship & Training Opportunities. * Opportunity to Lead, Grow, and Inspire a Dynamic Team In this role, you can also expect to gain experience in the following: * Interfacing with Local Clients. * Partnering with a Variety of Utility Clients Nationwide. * Working with different types of projects ranging from distribution to transmission level voltages. * Electrical Power Calculations. * Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc). If this sounds like the kind of environment where you can thrive, keep reading! The Electrical Engineer will be responsible for design and planning related activities associated with electric transmission, distribution, and substation facilities. This includes preparation of single-lines, schematics, and wiring designs for substations and quality control checks for wiring designs. Responsibilities will also include preparation of studies and reports for transmission and distribution systems. Are you ready to make an impact? Begin your journey of a flourishing and meaningful career, share your resume with us today! The Challenge: * Relay One Line Design. * Three Line AC Schematic Design. * DC Protection Schematic Design. * Panel Layout and Wiring Design. * Develop Bill of Materials Based on Design Criteria. * Quality Control Checks on Wiring Design. * Complete Project Lifecycle Support from Scoping to Final Design and Implementation. * Construction Support. * Applying the Minimum Requirements of the National Electrical Safety Code to the Design Processes * Working with Client Standards to Implement Design. * Working with a Designer/Drafter to Create the Required Drawings for Each Project. Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design. What Sets You Apart: * Bachelor's degree in Electrical Engineering, or related degree with two (2+) or more years of Substation protection control design and/or field testing/commissioning experience. * Experience in executing substation protection and control projects. * Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs. * Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design. * Ability to meet deadlines under pressure situations. * Collaborator and leader who can work effectively in team environment. * Self-starter who works independently with minimal direction. * Detail oriented. * Strong analytical skills and proven problem solver in both team and independent environments. * High level of computer competency. * Willingness to travel to project / client sites and team headquarters. You May Also Have: - Highly Preferred! * Engineer Intern ("EI" or "EIT") professional certification. * Professional Engineer ("PE") License. * Experience performing quality control checks on small substation protection and control design projects. * Experience working on CAD tools. * Master's degree in related field. * Field testing/commissioning experience. Begin your journey of a flourishing and meaningful career; share your resume with us today! WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click ___! At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world's toughest problems, and ___ with a welcoming culture that recognizes the importance of a strong work/life balance, as well as ___. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. PowerDelivery PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. April 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! We are looking for a Senior Substation Physical Engineer to join our team. As an Career Substation Physical Engineer, candidates will have the opportunity to work on projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects. * Fully Remote!- Work from where you are! * Candidates must located in the Denver, CO or Minneapolis, MN area. * Must be willing to travel to customer sites Additional Offerings: * Sign on Bonuses available! * Relocation Assistance available! Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: * Engineer in Training Certificate (EIT). * Professional Engineer License (PE). * Project Management Professional (PMP). * Technical & Non-Technical Training Opportunities. * Leadership Opportunities. * Mentorship & Training Opportunities. * Opportunity to Lead, Grow, and Inspire a Dynamic Team Begin your journey of a flourishing and meaningful career, share your resume with us today! The Challenge: * Experience in executing substation physical projects * Excellent communication skills and ability to interact with the internal team and clients to meet project needs. * Performing quality control checks on substation physical design projects. * Expected to read and design substation physical drawings such as one-line drawings, three-line drawings, plan-section drawings, foundation, grounding drawings. * Create and check bill of materials for substation physical * Expected to attend site visit at customer location Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design. What Sets You Apart: * Bachelor's degree in electrical engineering, or related degree with two (2+) or more years of related substation physical design experience. * Experience with grounding studies/lightning protection and lighting studies. * Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs. * Ability to meet deadlines under pressure situations. * Collaborator and leader who can work effectively in team environment. * Self-starter who works independently with minimal direction. * Strong analytical skills and proven problem solver in both team and independent environments. * High level of computer competency. * Willingness to travel to project / client sites and Portland, OR office as needed. You Might Also have: Highly Preferred! * Engineer Intern ("EI" or "EIT") professional certification. * Professional Engineer ("PE") License. * Working knowledge of protection and control design * Experience with bus calculation * Experience with WinIGS or CDEGS * Master's degree in related field. WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click ___! At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world's toughest problems, and ___ with a welcoming culture that recognizes the importance of a strong work/life balance, as well as ___. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. PowerDelivery PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. April 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Project Engineer Opportunity with a top tier demolition/carpentry Subcontractor! This Jobot Job is hosted by: Asante Kamtema Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $105,000 per year A bit about us: Our client is a well-established specialty contractor focused on demolition and carpentry services across a wide range of commercial construction projects. This company has built a strong reputation for delivering high-quality work across industries including healthcare, education, retail, hospitality, and government facilities. Operating as a trusted trade partner rather than a general contractor, this company performs selective interior and structural demolition, as well as rough and finish carpentry for complex build-outs and renovations. With a union workforce and a strong emphasis on safety, quality, and results, the team is known for its ability to execute projects in active environments, adapt to changing conditions, and consistently meet demanding schedules. Why join us? This company offers a unique opportunity to gain hands-on experience across both project management and field operations, making it an ideal environment for growth into future leadership roles. • Exposure to both demolition and carpentry scopes, providing a well-rounded construction background, • Opportunity to work on diverse commercial projects ranging from hospitals and schools to tenant improvements and public facilities, • Collaborative team environment with direct access to experienced project managers, superintendents, and estimators, • Strong emphasis on career development and upward mobility within the organization, • Stable pipeline of work with consistent project volume throughout the year, • Company culture centered on teamwork, safety, and delivering high-quality results Job Details Key Responsibilities • Assist Project Managers in planning, coordinating, and executing demolition and carpentry projects, • Review construction drawings, specifications, and scopes of work to ensure project accuracy, • Support project scheduling, budgeting, and cost tracking to ensure projects stay on time and within budget, • Coordinate with field teams, subcontractors, and vendors to ensure efficient workflow and execution, • Participate in jobsite walks, progress meetings, and safety discussions, • Track RFIs, submittals, change orders, and project documentation, • Assist in material procurement, equipment coordination, and logistics planning, • Monitor field progress and help identify opportunities for cost savings and process improvements, • Bachelor’s degree in Construction Management, Engineering, or related field (or equivalent experience), • 1–3+ years of experience in construction, preferably with exposure to demolition, interiors, or carpentry scopes, • Ability to read and interpret construction plans and specifications, • Strong understanding of building systems, construction sequencing, and jobsite operations, • Excellent communication and organizational skills with the ability to manage multiple priorities, • Proficiency in Microsoft Office and construction management software (e.g., Procore or similar), • Self-starter with a strong work ethic and willingness to learn in a fast-paced environment, • Preferred Experience, • Experience working for a subcontractor or specialty contractor, • Exposure to selective demolition, tenant improvements, or commercial interiors, • Field experience or carpentry background is highly valued Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Established AEC Firm Seeks Experienced Bridge Engineer, Employee Owned, Hybrid Work This Jobot Job is hosted by: Ross Theel Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $155,000 per year A bit about us: Our client is a multidisciplinary engineering firm with a strong reputation for delivering high-quality transportation and infrastructure solutions. The civil engineering team specializes in the planning, analysis, and design of bridge and transportation structures that support safe and efficient mobility. Projects include new bridge construction, rehabilitation, inspection, and evaluation for public-sector clients. Engineers collaborate across disciplines and engage in technically challenging work that makes a lasting impact on communities. If you are an engineer with experience working on bridge projects, then please apply today to be considered within 24 hours! Why join us? This company offers a collaborative and supportive environment where engineers are encouraged to grow technically and professionally. Team members benefit from mentorship by experienced professionals, exposure to a wide range of bridge and transportation projects, and involvement throughout the full project lifecycle—from early planning and design through construction support. The firm values work-life balance and provides competitive compensation, comprehensive benefits, flexible work arrangements, and support for professional licensure and continuing education. Job Details Education & Licensure: Bachelor’s degree in Civil Engineering with a structural emphasis required; Master’s degree preferred. Professional Engineer (PE) or Structural Engineer (SE) license preferred, or actively pursuing licensure. Experience: Approximately 5+ years of relevant consulting engineering experience. Background in bridge and transportation structure design, inspection, and/or rehabilitation. Experience working on projects such as highway bridges, retaining walls, culverts, and related structures. Technical Skills: Strong understanding of structural and bridge design principles and applicable codes and standards. Experience preparing structural calculations, technical reports, plans, specifications, and cost estimates. Proficiency with structural analysis and design software, as well as engineering drafting tools. Familiarity with state DOT standards and procedures. Project & Professional Skills: Ability to support project delivery including scheduling, budgeting, and coordination with multidisciplinary teams. Experience providing construction support, including shop drawing review and responses to RFIs. Strong written and verbal communication skills. Ability to mentor junior staff and contribute to a collaborative team environment. Detail-oriented, organized, and capable of managing multiple assignments simultaneously. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Supporting accountability for sobriety in Addiction Recovery & Family Law with a comprehensive alcohol monitoring system This Jobot Job is hosted by: Gene Choi Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $200,000 - $250,000 per year A bit about us: Based in Fullerton, we are an exciting medical device company on the cutting edge of monitoring. We utilize facial recognition that can send real time data to individuals. We've been in business for over 10 years and are established as the premier monitoring system. We are looking for a very talented Lead Engineer with strong experience in .NET, Azure, and mobile development. Our team loves working here because we are stable, growing, we pay well, we have the best benefits, and we're a lot of fun! Why join us? • Competitive Base Salary!, • 401K match, PTO, and excellent benefits!, • Accelerated Career Growth!, • Hybrid (2 days remote)! Job Details Responsibilities: • Lead and manage a high-performing team of software developers, fostering a culture of innovation and continuous improvement., • Develop and execute the company's technology strategy, aligning it with business objectives., • Oversee the design, development, and implementation of software applications across multiple platforms (.NET, Azure, iOS, Android, Maui)., • Ensure the delivery of high-quality software solutions within set deadlines., • Drive the adoption of best practices in software development, including coding standards, code reviews, source control management, build processes, and testing., • Collaborate with other departments to identify and prioritize software development needs., • Manage software development projects, ensuring they are delivered on time and within budget., • Stay current with the latest technologies and industry trends, and incorporate them into our software development practices as appropriate., • Bachelor's degree in Computer Science, Software Engineering, or a related field. A Master's degree is preferred., • A minimum of 5 years of experience in software development, with at least 3 years in a leadership role., • Proven experience in developing software for .NET, Azure, iOS, Android, Maui, or equivalent platforms., • Strong understanding of the software development life cycle., • Excellent leadership and team management skills, with a proven ability to motivate and inspire a team of software developers., • Strong project management skills, with a proven track record of delivering software development projects on time and within budget., • Excellent problem-solving skills, with a proven ability to overcome technical challenges., • Strong communication skills, with the ability to clearly communicate technical concepts to non-technical stakeholders., • Up-to-date knowledge of the latest technologies and industry trends., • Ability to work in a fast-paced, dynamic environment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Mechanical Project Engineer - Project Leader - Fortune 500 Metals Manufacturer This Jobot Job is hosted by: Jamal Elkhateib Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $115,000 - $125,000 per year A bit about us: We are a global innovator in advanced aluminum solutions, powering progress across aerospace, automotive, commercial transportation, and industrial markets. With one of the world’s largest integrated metal manufacturing operations—spanning 100+ acres under one roof—our teams design and produce materials that make vehicles lighter, aircraft more efficient, and structures stronger, all while advancing sustainability at every step of the value chain. Why join us? • Top-notch Compensation and Benefits package, • Up to 9% total match on 401k!, • Stable Career path, • Rewarding experience to work with Fortune 500 Company, • Excellent culture and peers, • 401K Match, • 3 weeks of vacation to start Job Details Relocation Support offered* The Impact Own end-to-end capital project delivery—from scope and funding through installation, commissioning, and hand-off. You’ll spend ~95% of your time planning and executing projects with vendors and contractors, ensuring safety, quality, schedule, and budget are met in a high-performance manufacturing environment. What You’ll Do Lead full lifecycle CAPEX projects: develop scope of work, build business case and funding documentation, create project schedules, and manage budgets. Partner with procurement and legal on project language, RFQs/POs, and vendor contracts. Direct daily activities of vendors/contractors and craft personnel during installation, startup, and commissioning. Drive change control, risk mitigation, and safe work practices; ensure compliance with site standards and regulations. Coordinate cross-functionally (operations, maintenance, EHS, quality, finance) to deliver results and seamless hand-offs. Track reliability and performance, leveraging measurement and statistical controls to verify capability and sustain improvements. Basic Qualifications (Required) BS in Mechanical, Aerospace, Agricultural, Electromechanical, or Biomedical Engineering (accredited). 7+ years in a manufacturing environment. Proven track record leading, managing, and executing projects—design through installation and commissioning. Experience managing external vendors and contractors for design, materials, installation, and related services. Legally authorized to work in the U.S.; employment eligibility verification required at time of hire. No visa sponsorship available. Export Control: Role requires access to controlled technology as defined by EAR/ITAR; government authorization may be required to meet compliance obligations. Preferred Qualifications 10+ years with manufacturing processes, ideally in the metals industry. Experience developing project business cases and capital approval requests. Proficiency with reliability techniques (measurement, statistical control, capability, maintainability). Strong theoretical and hands-on problem solving to correct issues and drive sustained improvements. Ability to oversee craft personnel and maintain an ongoing, productive dialog with installers to clarify requirements and ensure safe work practices. Excellent written and verbal communication; proven success coordinating and/or leading cross-functional teams. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Growing Firm This Jobot Job is hosted by: Lincoln Sprague Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $110,000 per year A bit about us: We are a growing MEP firm based out of Grand Rapids who is looking to expand our Structural Engineering Team! Why join us? • World Class Benefits, • Flexibility in schedule, • Tuition reimbursement, • Company sponsored outings!, • Much More Job Details Job Details: We are currently seeking a dynamic and experienced Structural Engineer to join our thriving team. As a Structural Engineer, you will be responsible for designing, planning, and overseeing construction projects, ensuring that structures are safe and capable of withstanding the elements. This is an exciting opportunity to work on a variety of projects, from residential developments to commercial structures, using cutting-edge technology and innovative engineering solutions. Responsibilities: 1. Develop design ideas using AutoCAD 3D, considering the client’s requirements and the project’s potential environmental impacts., 2. Ensure that all designs are robust, efficient, and meet the highest standards of safety and sustainability., 3. Conduct site investigations to gather data for planning and design., 4. Work on erosion control, ensuring that the environmental impact of our projects is minimized., 5. Develop detailed designs for site development, including drainage and shoring., 6. Prepare reports, designs, and drawings, making complex engineering concepts and procedures understandable for clients and non-engineering professionals., 7. Liaise with other professionals, including architects, surveyors, and contractors to ensure that projects are delivered on time and within budget., 8. Monitor the progress of projects from concept to completion, ensuring that structures are built according to the design and specification., 9. Stay up-to-date with the latest engineering developments and innovations, applying this knowledge to your work. Qualifications: 1. Bachelor’s Degree in Civil Engineering or a related field., 2. Professional Engineer (P.E.) license is required., 3. Minimum of 5 years of experience in civil or structural engineering, with a focus on site development., 4. Proficiency in AutoCAD 3D is essential., 5. Strong understanding of erosion control, shoring, and drainage., 6. Excellent problem-solving skills, with the ability to think creatively and develop innovative solutions to engineering challenges., 7. Strong communication skills, with the ability to explain complex engineering concepts in a clear and understandable way., 8. Ability to work as part of a team, collaborating with other professionals to deliver high-quality projects., 9. Commitment to continuous professional development and learning. This is a fantastic opportunity for a seasoned Structural Engineer seeking a permanent role in a dynamic and innovative engineering firm. If you have the skills and experience we're looking for, we'd love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Be a part of our mission! As a world leader in creating comfortable, sustainable, and efficient climate solutions for buildings, homes and transportation, it's our responsibility to put the planet first. For us at Trane Technologies, and through our businesses including Trane® and Thermo King, sustainability is not just how we do business—it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what's possible for a sustainable world. Learn about our benefits designed for you to Thrive at work and at home. We boldly go. Where is the work: Monday to Thursday, work onsite with your colleagues. Fridays, choose your work location, balancing what your work requires. In this role as a Senior Mechanical Engineer you will work to research, design, validate and maintain products for the Thermo King North America Trailer business. The position will collaborate cross-functionally across multiple regions, and have frequent interaction with our global manufacturing facilities, dealerships, and customers. You will be responsible for delivering major New Product Development programs that meet specific performance and Quality/Cost/Delivery goals. You will also work to deliver Quality, Sustaining and Productivity engineering projects by teaming with other functions, including Product Management, Procurement, Manufacturing and Field Service. What you will do: * Lead the design, development and validation of mechanical systems, assemblies and components. * Generate, evaluate, analyze, and document design concepts for components and assemblies to meet new product requirements. * Deliver design documentation by Releasing and/or revising 3D models, drawings, BOMs and product lifecycle data within the CAD and PLM system. PTC Creo, PTC Windchill and Siemens Teamcenter experience are a plus. * Coordinate and collaborate cross functionally with Chief Engineering, SMEs, and other engineering functions to develop technical management plans for technical risks. * Ensure all engineering activities adhere to our product development processes. Including but not limited to: * Requirements definition * DFMEA and DVP&R development and management * Test Plan creation * Test Plan Execution and Documentation * Design Review Preparation and Presentation * Project Implementation * Frequent collaboration with Internal Test Lab, Manufacturing Engineering and Operations, Quality, Procurement, Service, Finance, and key suppliers is expected to meet project deliverables. What you will bring: * Bachelor’s degree in Mechanical Engineering and at least 6 years of experience in mechanical design engineering or product development is required. * Proficiency in mechanical design, calculation and verification methods. Experience with refrigeration systems, coils, compressors, valves, harnessing, structural weldments, engines, and power transmission systems are a plus. * Proficiency in part design for formed sheet metal, stampings, machining, weldments, castings, injection molded parts is expected. * Knowledge of manufacturing principles, processes and design for assembly is expected. Experience with automated or robotic assembly is a plus. * Quality system knowledge and understanding is expected. Experience using SPC or PPAP process is a plus. * Significant experience using 3D modeling software is expected. PTC Creo will be used and proficiency is preferred. Annual Base Salary Range or Hourly Base Pay Range: $105,228.33 - $146,720.00 Compensation Type: Salary Incentive Eligible: No Sales Commisison Eligible: No Disclaimer: We strive to provide competitive compensation for this position, tailored to a variety of factors. The actual compensation will depend on elements such as seniority, merit, geographic location, education, experience, travel requirements, and union designation. Our compensation range is generally based on the national average for the country. Additionally, benefits may vary depending on the region, business alignment, union involvement, and employee status. Safety Sensitive Role: No The company designates certain roles as Safety Sensitive. Safety Sensitive roles may require that you pass additional drug screening. We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Applicants must be legally authorized to work in the United States. We are unable to sponsor or take over sponsorship of a school/employment or any other visa , regardless of expiration date, now or in the future. Who Are We? Exmark, located in Beatrice, Nebraska is a division of The Toro Company. Exmark is the leading manufacturer of commercial mowers and equipment for the landscape professional. Exmark mowers are trusted 2-to-1 over the next best-selling brand of zero-turn mowers by landscape professionals. All Exmark products are designed to help customers increase productivity, while delivering unmatched quality. The Mechanical Design (VAVE) Engineer will act as project leader for outdoor power equipment Value Analysis-Value Engineering (VAVE) programs, portions of such programs, or special projects. Identify, define, and justify VAVE opportunities. Assist management with the planning and approval phases of programs and then assume full responsibility for executing project plans. Ensure that cost, performance, reliability, safety goals, and DFMA metrics meet established requirements. What Will You Do? In order to grow and build a successful career with The Toro Company, you will be responsible for: * Responsible for completing VAVE engineering assignments: concept/opportunity identification, feasibility assessment, design, cost/value justification, and testing/validation. Accountabilities include, but are not limited to product cost, value, timing, durability, safety, performance, manufacturability, and quality. * Calculate total cost models to justify/support program approvals. * Ensure documentation requirements are met; project files, engineering drawings, BOM updates, certification reports. * Follow APQP process to ensure “built in” quality. * Responsible for the design and analysis (or oversight of) of engineering design proposals using calculations, testing, CAE methods, or other techniques as needed. * Conduct feasibility studies to identify viable solutions or knowledge gaps * Research knowledge gaps, develop specific technical expertise to close gaps and facilitate knowledge-based design and development. * Conduct competitive product teardowns to analyze and document competitive cost structures and supply chains. * Procure and coordinate the efforts of outside consultants, labs, suppliers, etc. needed to accomplish project objectives. * Work with NPD and test engineers to gain product insight and collaborate for solution validation. * Apply value analysis techniques to find lowest cost, highest value design. * Develop solutions that meet appropriate safety standards; work with NPD teams, safety engineers, and testing agencies to obtain necessary approvals/certifications. * Plan and manage projects Use data analytics tools to identify and prioritize opportunities. * Work with engineering management to develop formal project proposals and execution plans. * Work with collaborators to establish program requirements * Assist with DVPR development and facilitation. * Project management: leads/coordinates project execution with cross functional partners * Report project status to management * Assist management with training other employees in technical areas. * Keep current with industry/supply chain/manufacturing developments, technology, competitive products, etc. * Applies “Total Quality” principles in the daily performance of the job. Engineer IV * Lead engineering activities to support enterprise/strategic supply chain productivity projects * Collaborate to develop VAVE related data analytics tools * Maintain productivity tracking databases, provide reporting data * Develop and deploy cost models for competitive teardowns * Lead VAVE activities, support and prioritize work of junior team members Engineer V * Assist management with establishing productivity strategy, goals, tools, and approaches. * Track team performance against specified goals, adjust action plans to meet goals * Lead teardowns, cross functional productivity events/efforts, scope development for VAVE data analytics tools What Do You Need? To be considered for this role, an individual should meet the following minimal requirements: * ABET-accredited Bachelor’s of Mechanical, Aeronautical, Agricultural, Industrial, Manufacturing, or equivalent engineering degree required. Masters in Engineering is a plus. * Engineer III, 5-7 years of relevant professional experience. * Engineer IV, 8-12 years of relevant professional experience. * Engineer V, 13+ years of relevant experience. * Experience with broad design and manufacturing process knowledge is preferred: steel fabrication, heat treat, metallurgy, plastics, rubber, powder metal, die casting, forging, coatings, fasteners, adhesives, composites, driveline components, electrification, lighting, controls, packaging, etc. * Must be able to create and analyze component or system level design concepts with autonomy. * Has demonstrated a high level of productivity, competency, and technical aptitude in the execution of duties. Experience Preferred: * SAP experience preferred. Power-BI or AI data analytics tool experience is a plus. * Experience with Lean NPD, Six Sigma, or Continuous Improvement is highly preferred. * Formal project management or time management training and/or experience are preferred. * Experience with development of engineering drawings, GD&T, and metrology are preferred. Engineer IV * Experience directing work of drafters, designers, and junior engineers * High proficiency with broad design and manufacturing process knowledge * High proficiency with engineering drawings, GD&T, and metrology * Experience leading cross functional teams through projects of significant complexity Engineer V * Previous experience working with great autonomy, developing strategies, setting priorities, and making decisions that result in highly successful goal attainment * Highly proficient with people/partnership/leadership skills * Experience leading productivity events, Kaizens, or continuous improvements efforts * High proficiency with Lean Manufacturing, Lean NPD, waste reduction * Expert proficiency with many manufacturing processes and methodology What can we Give you? At Exmark, we are always working to make sure our employees know just how valued they are. In addition to a competitive salary, an affordable and top tier medical/dental/vision plan, 401k, and many other great benefits – Exmark offers employees at our Beatrice, NE location a variety of perks, including: Dress for your day - We know you're more productive when you're comfortable, which is why employees are encouraged to take advantage of our casual, office-plant blended environment. Location – Onsite at Exmark Division Headquarters in Beatrice, NE 68310 Wellness - In addition to physical wellbeing, TTC offers a variety of mental health, financial health, and other types of resources to every full-time employee. Volunteerism - The Toro Company is proud to provide employees 20 hours of paid time to volunteer in the community. Growth Opportunities – TTC prides itself on giving our employees the chance to grow their careers. Tuition reimbursement, opportunities to move into new areas of interest, and promotion opportunities are a few examples. Competitive Salary – The pay range takes into account skills, experience, education, and location. It is not common to be hired at or near the top of the range; compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the annual pay range is between $90200 - $162000. Cash compensation is one piece of our competitive total rewards package. You may be eligible to participate in an incentive program, which rewards employees based on individual and organizational performance. Eligibility and award amounts are determined by company policy and performance metrics. If you need to, you can access your pay early with the dailypay app. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. #LI-Exmark #LI-Onsite

Job Description About XeteX At XeteX, our mission, vision, and values drive our company purpose: “Helping Buildings Breathe Better.” By designing and manufacturing high-performing energy recovery ventilation and air handling solutions for industrial and commercial buildings, XeteX produces a better world for all of us. XeteX was founded in 1984. In recent years, our Company has experienced unprecedented growth and has been recognized as an eight-time Inc. 5000 Honoree ranking as one of the fastest-growing private companies in America. Our headquarters are located in Coon Rapids, MN and our production facilities are based in Holmen, WI Xetex is teaming with innovation, expertise, and outstanding people. That is why we value our people as our greatest asset! Our employees lead through integrity, apply creativity and talent, invent innovative solutions to meet new demands, and offer effective services/products to be leaders in the industry. By adding your creativity, innovations, and contributions, you take pride in being a valued member of our growth and success. Project Engineer The Project Engineer is a highly skilled and detailed orientated Project Manager and Designer with experience in design of air handling equipment. This role is responsible for providing detailed designs, bills of materials, and drawings for each job, ensuring equipment meets performance standards. This person will manage projects from design submittal through successful build out while coordinating with manufacturing, engineering, and vendor teams. Job Duties: * Review and modify specifications for the custom air handling equipment provided by the Sales Engineer to ensure the design meets customer needs. * Utilize tools and calculators to select the appropriate compressors, fans, coils and components needed to match specifications laid out. * Provide detailed designs, BOM’s, and drawings on custom air handling equipment for each job sold. * Serve as project manager for the job starting with providing a detailed design submittal, supporting manufacturing, and ensuring an on-time shipment of the equipment. Project completion will happen once the equipment has been successfully started up at the customer’s site. * Work collaboratively with fellow engineers to review submittal documents and implement changes to standard processes. * Coordinate resolution of any job-related field issues. Provide technical support as needed. * Provide support as required on engineering design tools. * Review new vendor product offerings and support, as needed, their implementations into XeteX designs. Qualifications: * BS in Engineering and 5 years or more of industry experience, preferably related to commercial air handling products. Or, 8 years or more of industry experience in sizing and selecting air handler equipment * Strong thermodynamics background preferred – especially with refrigeration or heat recovery systems. * Broad knowledge of applied Engineering principles mechanical disciplines. * AutoCAD, SolidWorks, or other CAD software proficiency required. * Detail-oriented, ability to plan, organize, set priorities and manage multiple projects. * High level of analytical ability is required. * Strong written and verbal communication skills required. * Working knowledge of Microsoft Office products required. * Ability to travel independently. Travel is infrequent and less than 10%. Our Purpose Through our purpose of “Helping Buildings Breathe Better,” XeteX unlocks the full potential of building environments through our innovative custom air handling solutions. We are dedicated to designing and manufacturing high-performance, sustainable systems that optimize building air quality, increase energy efficiency, elevate occupant comfort, and enhance operations. Our Vision Our vision is to be the premier HVAC air handling company, setting the standard for excellence in the industry. XeteX strives to provide exceptional solutions that create commercial and industrial building environments exceeding customer expectations in comfort and performance. Through continuous innovation, advanced technology, and a commitment to sustainability, our products contribute to a greener planet. Our Mission With a relentless focus on innovation and quality, XeteX exists to breathe life into commercial and industrial facilities to reach their highest capabilities. XeteX is directed by a simple idea: “Always do the right thing,” that represents our five Core Values: * Integrity - Being honest, transparent, and ethical. * Customer Focus - Prioritizing Customer needs in all we do. * Excellence - Surpassing expectations in every aspect of our work. * Collaboration - Embracing our collective strength which is the sum of our individual efforts. * Autonomy - Empowering our people to make a difference. Equal Opportunity Employer XeteX is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

We are unable to sponsor or take over sponsorship of a school/employment or any other visa , regardless of expiration date, now or in the future. Applicants must be legally authorized to work in the United States Who Are We? Join an exciting team working to advance electrified, automated, and smart connected products within The Toro Company’s Landscapes and Contractor Engineering Division, driving system level electrification, hybrid-electric, and controls solutions across electromechanical products. This role is the nexus between mechanical, electrical, software, marketing, and systems, translating customer needs into functional designs and production-ready platforms with system architecture, safety and requirements-driven development of electronic and electrified systems and products. In the Landscapes and Contractor Group, we take pride in being an industry leader in developing turf care products for residential and commercial customers under the Toro, Exmark, and Spartan brands. Our teams strive to create innovative, productive, and reliable products while partnering with world-class employees that bring passion to their everyday work. The Toro Corporation truly values its employees with employee development and advancement opportunities. What Will You Do? System Architecture, Electrification & Controls * Provide technical ownership for electrical and controls systems at the machine and platform level, including requirements, architectures, interfaces, diagnostics, and verification plans. * Lead definition of system requirements, interfaces, diagnostics strategies, and verification plans across electromechanical products. * Architect, select, and integrate system components (motors, inverters, batteries, chargers, sensors, switches, and harnesses) to meet performance, durability, manufacturability, safety, and cost targets. * Develop and tune controls systems for machine applications, including motors, actuators, and power-stage electronics, in close collaboration with firmware/software teams. * Drive system definition activities including architecture specifications, functional decomposition, and traceability from stakeholder needs to hardware and software interfaces. Validation, Safety & Compliance * Lead system‑level verification and validation activities using schematics, oscilloscopes, meters, DAQ systems, simulation tools, and data analysis to confirm performance, durability, and reliability targets are met. * Lead definition and documentation of functional safety concepts, safety functions, and performance allocations in partnership with safety, legal, and regulatory stakeholders. * Coordinate and facilitate product and platform‑level risk assessments, including hazard identification, risk evaluation, and mitigation strategy development. * Support compliance activities in partnership with regulatory teams and external labs for EMC, safety, and functional safety requirements. Cross‑Functional Delivery * Serve as a technical integrator across electrical, mechanical, software, controls, and safety disciplines to ensure aligned system behavior and design intent throughout the product lifecycle. * Operate as the technical nexus between mechanical, electrical, software, marketing, systems, and other groups to align solutions with customer needs and program objectives. * Lead and contribute to concept development, feasibility studies, and production launch activities within cross‑functional teams. * Lead hands‑on prototyping, instrumentation, and integration of electrical, mechanical, and software systems to evaluate concepts and mature designs. * Execute fast‑fail experiments and structured testing to quickly learn, iterate, and reduce technical risk. Technical Leadership & Continuous Improvement * Provide technical mentoring and peer guidance to engineers across disciplines, strengthening systems thinking, requirements quality, and safety‑driven design practices. * Identify emerging technologies, develop innovative concepts and product proposals aimed at meeting targeted market requirements or addressing distinct customer challenges. * Support development with model based tools (e.g., MATLAB/Simulink, LabVIEW) to develop control algorithms, simulations, and HIL/SIL validation. * Support existing products through troubleshooting, debugging, root cause analysis, and product improvement initiatives. * Create and maintain high‑quality technical documentation including system requirements, DFMEAs, test plans, and design review materials. * Collaborate with the Legal team regarding possible patent initiatives and strategies to minimize liability. * Occasionally travel to test sites, suppliers, distributors, customers, manufacturing facilities, and others as required. * Provide day‑to‑day technical guidance to junior engineers and collaborate effectively with suppliers. What Do You Need? * B.S. or M.S. Degree in Electrical, Mechatronics, or related Engineering field from an ABET accredited university required. * Engineer III- 5-7 years of experience in consumer or industrial product development of electro-mechanical or electronically controlled systems, with a demonstrated high level of competency in bringing electrical, electronic, or electrified systems and products from concept through to production. * Engineer IV-8+ years of experience in consumer or industrial product development of electro-mechanical or electronically controlled systems, with a demonstrated high level of competency in bringing electrical, electronic, or electrified systems and products from concept through to production. * Demonstrated experience in system-level controls & electrification development: requirements, power distribution, safety, diagnostics, and verification. * Demonstrated experience debugging firmware/software for motors and machines. * Demonstrated ability to analyze and troubleshoot vehicle electrical systems using machine schematics, meters, oscilloscopes and data acquisition equipment. * Demonstrated experience mentoring coworkers. * Demonstrated strong collaboration skills, including ability to translate cross-functionally to converge on feasible, valuable solutions. * Demonstrated technical competency, ability to identify and reduce risk, drive clarity, meet timelines, and apply strong engineering judgment to open ended situations to achieve project outcomes. * Highly competent oral and written communication skills, in English. * Results-driven and action-oriented; self-motivated, positive and energetic. * Strong problem solving skills. * Strong process orientation and drive for continuous improvement. * Desire to work in a fast paced, challenging, and evolving environment with a team-first mindset. * Demonstrated creative, fast‑fail learner who documents tradeoffs and iterates quickly. * Ability to multitask and manage multiple simultaneous projects of various complexities and size. Preferred Experience: * Experience with CAN or similar communication protocols preferred. * Experience with functional safety concepts, standards, and documentation practices preferred. * Demonstrated motor controls experience. * Experience with Li-ion battery development and machine integration preferred. * Experience working with NRTL’s to achieve regulatory approvals preferred. * Experience designing using EMI/EMC fundamentals preferred. * Leadership experience within product development teams preferred. * Experience designing for environmental sealing preferred. * Demonstrated mechanical design experience and proficiency. * Experience using CAD/modeling workflows and interpreting mechanical tradeoffs preferred. * Experience with Matlab/Simulink, NI LabVIEW, or other model-based design tools preferred. * Demonstrated experience developing firmware/software for motors and machines. What Can We Give You? At The Toro Company, we are always working to make sure our employees know just how valued they are. In addition to a competitive salary, an affordable and top tier medical/dental/vision plan, 401k, and many other great benefits - The Toro company offers employees at our Bloomington, MN HQ location a variety of perks, including: Dress for your day - We know you're more productive when you're comfortable, which is why TTC employees are encouraged to take advantage of our casual, corporate environment. Location – Conveniently located near both St. Paul and Minneapolis, we are centrally located for most commuters! Food - Take advantage of our onsite café, which serves both breakfast and lunch. With a Caribou Coffee attached, you can grab a snack and a coffee at any time during your day. Wellness - The Toro Company’s HQ offers complimentary use of our onsite fitness facility to employees. In addition to physical wellbeing, TTC offers a variety of mental health and financial health resources to all employees. Volunteerism - The Toro Company is proud to provide employees 20 hours of paid time to volunteer in the community. Summer Hours – Enjoy a flexible schedule during the summer! By working a little more during the first few days of the week, TTC employees at our Bloomington HQ are able to start their weekends early and leave by noon on Friday. Flexible Work Arrangements – This team is currently implementing a hybrid work schedule. The opportunity to collaborate in the office and work from home part-time, has promoted team-building and flexibility. Competitive Salary – The pay range takes into account skills, experience, education, and location. It is not common to be hired at or near the top of the range; compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the annual pay range is between $96900- $140000. Cash compensation is one piece of our competitive total rewards package. You may be eligible to participate in an incentive program, which rewards employees based on individual and organizational performance. Eligibility and award amounts are determined by company policy and performance metrics. If you need to, you can access your pay early with dailypay app. At The Toro Company, we are committed to fostering a secure and trustworthy recruitment experience for our applicants. Recruitment fraud is a growing concern for job seekers, so please be aware that throughout our recruitment process, you’ll never be required to pay any fees or disclose personal financial details when applying to TTC opportunities. All legitimate job opportunities must be applied for directly through our official careers page at jobs.thetorocompany.com or via Workday, our applicant tracking system. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees #LI-Onsite

By living according to a common set of values, we create a culture that unifies, embraces the uniqueness we all bring to the company, and positions Integer for long-term success. At Integer, our values are embedded in everything we do. Customer We focus on our customers' success Innovation We create better solutions Collaboration We create success together Inclusion We always interact with others respectfully Candor We are open and honest with one another Integrity We do the right things and do things right Integer is a global organization providing innovative, high-quality technologies and manufacturing to Medical Device OEM's (original equipment manufacturers) to enhance the lives of patients worldwide and a provider of high-end niche batteries for specialized applications in the energy, military, and environmental markets. We are guided by our six Values, including focus on Customers, Innovation, Collaboration, Inclusion, Candor, and Integrity. Working at Integer means you are part of a team passionately pursuing excellence in all that we do and always reaching for the next great achievement. The primary purpose of this position is to perform work which involves general engineering methods and tools; but you may also utilize more advanced technologies and engineering concepts while you are developing in your role as an engineer in the medical device industry. In this role, you will ensure that Integer's internal and external customer expectations are met or exceeded with occasional direction, instruction and guidance from more experienced engineers and managers in your organization. * You adhere to Integer's Values and all safety, environmental, security and quality requirements including, but not limited to: Quality Management Systems (QMS), Safety, Environmental and Security Management Systems, U.S. Food and Drug Administration (FDA) regulations, company policies and operating procedures, and other regulatory requirements. * You will generally work independently with occasional guidance from supervisors or mentors to evaluate, select and apply standard engineering techniques, procedures, and criteria, using judgment in making minor adaptations and modifications to existing specifications, procedures, and work instructions. * You will review procedures and plans prior to implementation as well as evaluate existing products, processes and materials for failure analysis and potential improvements. * You will participate in projects that require you to investigate, develop, document and implement new product and process technologies of moderate complexity and scope. * While often you may be responding to situations presented to you by others, you will also be able to demonstrate proactive insight into technical challenges and mitigates potential issues or incorporates improvements. * You will plan, schedule and execute the engineering work in a part of a major project; or you may lead a smaller scope project. * You will perform work on technical projects where you will follow Integer's standard quality management and production system methodologies to investigate opportunities for product and process improvements. * You will apply standard data analysis practices and techniques to establish root cause for product and process failures or to support the justification for improvements to products and processes. * You will be required to observe products and processes to recognize discrepancies in results and follow operations throughout a series of detailed steps or processes to establish root cause of the discrepancies. * You are expected to collaborate with others in the exchange of information, ask questions and regularly check for understanding in support of your development as an engineer. * You embed Quality within the Engineering discipline - "I own Quality." You are a standard bearer for Quality in everything we do at Integer, by assuring adherence to our Quality Management System (QMS), facilitating and/or contributing to corrective and preventive actions, and contributing to the successful attainment of our quality KPI's and journey to 5 Sigma. * You may perform other duties as needed and as directed by your line of supervision. We're looking for a Metrology Technician/Engineer that can program and troubleshoot PCDMIS CMMs and OGP branded Vision systems, perform test method validations to ensure that the inspection programs are statistically suitable for use, manage calibration activities, help develop fixture designs for inspection usage, and operate our CT Scanner. It's preferred if you have experience in PCDMIS for the CMMs and Zone3, MeasureX, MeasureMind, and MeasureFit for the Vision based systems, but experience on similar platforms that can transfer into a quick learning curve is also valuable. This is for a medical component manufacturer working in an ISO 13485 regulated industry. Will also support and manage the Calibration system. Provide support of Integer's Manufacturing Excellence and Market Focused Innovation Strategies * You champion the development of and deployment of the systems and tools to drive innovation and continuous improvement. * You embrace the Manufacturing Excellence culture based on the Integer Production System and its five focus areas: * Strategy Alignment through Site Hoshin Plans, the regular cadence of Sales, Inventory, and Operations' Planning (SiOP) meetings, and regular updates to the value stream maps. * Leadership of Sustained Change by ensuring production monitoring & improvement activities and deployment of Leader Standard Work. * Standardization through workplace organization & visual controls (5S), Manufacturing Standard Work, and robust training & certification programs. * Associate Engagement promoted through the adoption of standardized problem solving. methodologies, behavior-based safety programs, and improvement idea and suggestion systems. * Systems & Process Optimization through adoption of principles of built in quality, optimized scheduling & material system designs, work cell design, and total productive maintenance. The specific measures listed below may be subject to change and are not intended to be an all-inclusive list * Safety is our highest priority; you will be an active supporter of the Integer Environmental Health & Safety programs. * Quality - Achievement of site Quality KPI's * You will have defined Goals and Objectives specifying key projects and expected milestones to achieve. * Given your capabilities and experience, you will identify ways to shorten the project durations and make changes to current processes and procedures that enable greater efficiencies. * Innovation and ideation are critical aspects of your role and you will be expected to generate continuous improvement suggestions and support the implementation of them. * You earned, as a minimum, a bachelor's degree in an engineering or related technical field; and have at least three years of relevant experience. * While you will have occasional support and guidance from more experienced engineers, supervisors or managers, you will demonstrate the ability to work independently as well as collaboratively with other associates and cross functional teams. * You demonstrate a solid technical aptitude with the ability to be an effective contributor to a team or produce results of a technical nature as an individual. * You have a functional understanding of the Integer Quality Management Systems and are able to complete required Quality System documentation tasks with little or no direction from others. * You demonstrate competency in both written and oral communications. * You maintain a calm demeanor that transcends the high energy, constantly changing production environment. * You possess a positive, can-do attitude with an underlying belief that failure is not an option. Required Experience: Position will be scaled based on amount of experience in metrology. Minimum experience would be 3 years of CMM and Vision based programming at a technician or above level and a solid understanding of GD&T print dimensioning. Beneficial Experience: An Engineering degree, experience with designing and executing test method validations, capability studies, fixture designs, Solidworks, writing and training work instructions, root cause analysis, supervision over quality inspectors, and supervision of the calibration system is all value-added experience. Previous Experience with a CT Scanner is also value-added. Beneficial Soft Skills: This position is a relatively autonomous position, so you will need to be self-directed in solving problems You will work closely with diverse manufacturing, engineering, and management teams, so the ability to clearly communicate with people of all skill levels is essential. You will be a system matter expert in the area of metrology, so you will be called upon to help troubleshoot processes that aren't working and that will involve the ability to stay calm under pressure situations. Salary: 75,000-111,000 Our total rewards program is designed to attract, retain, and motivate associates to contribute to Integer's success. Our compensation program includes base salary and a cash-based incentive program supporting our pay-for-performance philosophy. We provide a comprehensive benefits package with immediate eligibility including medical, dental, vision, disability, life insurance, and adoption benefits. Parental leave is available after one year. Optional employee-paid programs include supplemental life insurance, critical illness, hospital indemnity and accident insurance. Employees are immediately eligible to participate in the 401(k) plan with company matching contributions. We provide 80 hours (10 days) of company designated holidays per year plus an annual allotment of paid time off. U.S. Applicants: Equal Opportunity Employer. In addition, veterans and individuals with disabilities are encouraged to apply.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers in the Minneapolis, MN area who are passionate about electric utility design engineering. We're looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! This position is hybrid in nature, where 3 days/week are spent working in our office, collaborating with internal teams, and 2 days/week can be spent working remotely. As a Distribution Engineer, You can expect to: * Perform design engineering for Leidos electric utility customers * Develop work packages for OH, UG, URD, Make Ready, and Street Light projects, using customer GIS and WMS systems such as DDS, GDT, GE Smallworld, Bentley Expert Designer, and Maximo * Manage scope, schedule, and budget of work assigned. * Perform functional tasks, planning, and/or customer follow-up * Perform scope analysis of work assigned and maintain schedule adherence to advocate client priorities * Initiate continuous improvement to workflow processes that drive efficiency and high-quality standards in client design deliverables * Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications * Be comfortable in both a field and office setting: the role may require local or regional customer-site visits to collect field data that will assist in developing work packages; Candidates should possess a valid US driver's license in order to be available for in-person meetings and assignments in the area on an as-needed basis. What Sets You Apart (Background Requirements): * 2+ years of prior relevant experience is required. * Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree * Experience and demonstrated proficiency with the National Electric Safety Code (NESC) * Some Prior experience with structural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and electric demand and fault currents calculations. * Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates). * Ability to demonstrate strong written, verbal and interpersonal communications skills Preferred Experience: * EIT Certification. * Providing estimated costs, development of a BOM, calculating the CIAC. * Design tools such as Pole Foreman, SOCKET, Spida-Calc, DDS. * MicroStation -performing Electrical Distribution design. * Work management software and job estimating software. * CAD tools At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. April 16, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job DescriptionJob Summary The Welding Engineer is responsible for developing, qualifying, and continuously improving welding processes used in the production of wedge wire and filtration screen products. This includes precision TIG and resistance welding for thin wire and rod assemblies, custom mandrel applications, and ensuring compliance with both internal and industry standards. The role requires collaboration across engineering, production, maintenance, and quality teams to ensure process stability, high product quality, and operational efficiency. Key ResponsibilitiesWelding Process Development & Qualification • Develop, qualify, and document welding procedures (WPS, PQR, WPQR) tailored for wedge wire screen assemblies., • Specify welding methods, parameters, and consumables optimized for fine-wire and stainless steel components., • Support and maintain automated and orbital welding systems.Production Support & Continuous Improvement, • Provide real-time troubleshooting of welding issues, minimize rework, and support root cause analysis., • Lead improvement projects aimed at scrap reduction, cycle time optimization, and weld quality enhancement., • Apply lean manufacturing tools (SMED, Kaizen, 5S) to the welding and fabrication areas.Tooling & Fixture Development, • Collaborate with tooling engineers to develop custom mandrels, winding fixtures, and weld jigs., • Support design and maintenance of tooling for high-precision welding of cylindrical and conical screens.Quality & Compliance, • Establish weld inspection criteria and support integration of slot width measurement systems (optical, laser)., • Ensure compliance with relevant standards such as AWS D1.6, ASME Section IX, and customer-specific requirements., • Document weld procedures and maintain compliance records for audits.New Product Introduction (NPI) & DFM Support, • Participate in design reviews and provide feedback on manufacturability and weldability of new screen designs., • Support pilot runs and scale-up for new or custom products requiring unique welding setups.Training & Documentation, • Train weld technicians on best practices and ensure adherence to qualified procedures., • Create and maintain detailed work instructions and visual aids for welding operations.Required Qualifications, • Bachelor’s degree in Welding Engineering, Mechanical Engineering, or a related discipline., • 3+ years of experience in welding process engineering, preferably in a precision manufacturing environment., • Strong knowledge of TIG, resistance, and automated welding processes., • Familiarity with stainless steels and corrosion-resistant alloys used in filtration products., • Experience with welding standards and codes (e.g., AWS, ASME)., • Proficiency in CAD software and understanding of fixture/tooling design.Preferred Qualifications, • Certified Welding Inspector (CWI) or Certified Welding Engineer (CWEng) credentials., • Experience with screen fabrication or custom metal filtration components., • Lean Six Sigma certification or equivalent process improvement training., • Professional standing with appropriate professional society such as AWS or ASQ is highly desirable., • AWS Certified Welding Inspector (CWI) certification and the ability to administer an approved welding program., • ASNT TC-1A Certified Level III in one or more NDE methods is highly desirable, but not required., • Ability to define problems, collect data, establish facts, draw valid conclusions, and make actionable recommendations., • Ability to read, analyze, and interpret common scientific and technical publications related to welding, materials, and manufacturing processes. Why Johnson Screens is a Great Place to Work: At Johnson Screens, we value open-mindedness, competence, collaboration, and integrity. We support our people with competitive total rewards, comprehensive benefits, and continuous development – so everyone can work with confidence and deliver results that matter. Shared Cost Benefits Medical and Prescription Drug Insurance, Dental Insurance, 401(k) Plan - 5% Employer Match, Health Spending Account (HSA) Employee Paid Benefits Vision Insurance, Flexible Spending Account (FSA), Supplemental Life and AD&D, Critical Illness, Hospital Indemnity, Legal Insurance Employer Paid Benefits 80 Hours of Paid Holidays per Year, Vacation Time Off, Sick Time, Short-Term Disability, Long-Term Disability, Basic Life and AD&D, Accident Insurance, Business Travel Accident Insurance, Employee Assistance Program (EAP), Tuition Reimbursement, Student Scholarships About Johnson Screens – A brand of Aqseptence Johnson Screens is the leading global provider of innovative screening and separation solutions. We support a wide range of industries, which means that almost every product around us has touched one of our screens during its manufacturing process. Since our inception over a century ago, our products have helped protect lives by reducing harmful waste, providing clean water, and making the best use of our precious natural resources. We strive to be a great place to work and do what is right for our customers and our people. We thrive on innovation and continuous improvement, and we believe that our people are the key to our success. Our daily work is guided by six values, which we call our True North: Open-Mindedness Competence Confidence Collaboration Integrity Results This is the standard we hold ourselves to – and we’re raising the bar. High performers belong here. If you’re ready to make your mark, we’re ready to meet you. Apply now and grow with Johnson Screens. Johnson Screens is an equal opportunity employer, including disability and protected veteran status.

GEA Group, founded in Germany in 1881, is a global leader in engineering solutions, serving industries such as food and beverage, pharma, dairy, and more. With over 18,000 employees worldwide and a strong U.S. presence since 1929, GEA combines the heritage of a well-established company with the innovation of a forward-thinking industry leader. At GEA, we’re not just building equipment, we’re building lasting careers with an average employee tenure range from 8 + years, reflecting the strong culture, growth opportunities, and support we provide. Responsibilities / Tasks • Start strong – Medical, dental, and vision coverage begins on your first day, • Recharge and refresh – Enjoy 12 paid holidays, including a flexible floating holiday, and 136 hours of PTO to relax or explore, • Invest in your future – A 7% 401(k) employer match helps grow your retirement savings faster, • Keep learning – Take advantage of tuition reimbursement to further your education or skillset, • Live well – Our wellness incentive program rewards healthy habits, • Get support when you need it – Access to a confidential Employee Assistance Program for personal or professional guidance, • Save smart – Flexible Health Savings and Spending Accounts to manage out-of-pocket expenses The typical base pay range for this position at the start of employment is expected to be between $110,000 - $130,000 per year. GEA Group has different base pay ranges for different work locations within the United States. The pay range is not guaranteed compensation or salary. The estimated range is the budgeted amount for the position. Final offers are based on various factors, including skill set, experience, location, qualifications, and other job-related reasons. You may be eligible for additional rewards, such as a discretionary bonus (based on eligibility) and/or equity awards. Job Summary The Senior Process Automation Engineer is a key contributor within the Automation Engineering team, supporting service project upgrades across the Nutrition Plant Engineering Division in North America. This role is responsible for the design, development, testing, and commissioning of industrial process automation systems. The Senior Engineer serves as a technical lead on assigned projects, working independently while collaborating closely with cross-functional teams. Projects span a wide range of industries and technologies, including Food, Dairy, Beverage, Brewery, Chemical, Pharmaceutical. This position offers the opportunity for a hybrid or remote work schedule, depending on project needs. Key Roles and Responsibilities Sales & Pre-Sales Support • Support Sales in driving automation upgrades and digital service product growth., • Participate in the sales phase of projects, including customer meetings, pre-sales technical support, cost estimation, and proposal development., • Provide technical input to support scope definition, pricing, and execution planning. Automation & Software Engineering • Develop detailed Process Functional Descriptions (FDs) based on general process descriptions., • Design automation software by applying knowledge of computer systems, networks, and industrial control platforms., • Coordinate with product departments to ensure automation programming meets system and customer requirements., • Ensure compliance with GEA Process Automation standards and quality requirements., • Conduct software testing through simulations on applicable hardware platforms or emulators. Electrical & Control Systems • Collaborate with electrical designers on the design of control panels and automation systems., • Incorporate customer specifications and technical requirements into electrical system designs., • Create requisitions for automation and electrical equipment., • Assist with electrical testing of completed systems, both in-house and at customer sites., • Coordinate and inspect work performed by electricians during system wiring and installation. Commissioning & Site Activities • Commission instrumentation, electrical, and control systems at customer sites., • Perform I/O checkout of installed equipment., • Support close-out of automation punch-list items during commissioning., • Assist with operator and maintenance training during project start-up., • Provide technical troubleshooting and on-site support related to system performance and process issues. Project Execution & Leadership • Act as Automation Lead on assigned projects unless otherwise designated., • Manage automation and electrical engineers assigned to projects., • Monitor team tasks to ensure deadlines are met with high-quality results., • Generate project schedules aligned with program milestones., • Provide detailed project information to Project Managers, including risk identification, work breakdown structures, and activity planning., • Support scope change identification and assist with cost and schedule impact estimates and change orders. Documentation & Standards Compliance • Maintain accurate documentation of customer meetings, correspondence, and technical project files., • Manage project document control, including versioning, transmittals, approvals, and deliverables., • Utilize tools, templates, and documentation defined by GEA standards throughout all project phases., • Assist in preparation of O&M manuals and spare parts lists., • Ensure compliance with customer specifications, applicable regulations, and GEA Environmental Health & Safety and OSHA requirements. Procurement & Cross-Functional Collaboration • Prepare RFQs and support Procurement with vendor technical evaluations, selection, and management., • Work closely with process engineers to ensure automation designs meet customers and process requirements., • Collaborate with cross-functional teams to ensure effective and compliant project execution., • Support the service organization as required. Additional Responsibilities • Deliver technical or project progress presentations to management and customers as needed., • Respond promptly and effectively to additional duties as assigned. Your Profile / Qualifications Skills & Competencies • Excellent verbal and written communication skills in English., • Strong interpersonal, leadership, and customer service skills., • Ability to work effectively both independently and within a team environment., • High level of organization, attention to detail, and time-management skills., • Strong analytical and problem-solving abilities., • Self-motivated, proactive, and capable of working in fast-paced and occasionally high-pressure environments., • Demonstrated commercial and business acumen., • Ability to prioritize and delegate tasks appropriately., • Proficient with Microsoft Office Suite & related software tools, and previous experience with Rockwell Automation hardware and software preferred. Education and Experience • Bachelor’s degree in Electrical Engineering, Automation Engineering, Instrumentation Engineering, or a related field., • Typically, 5+ years of experience in a similar automation engineering role., • Willingness to travel up to 25% as required. At GEA, we don’t just offer jobs, we offer opportunities to thrive, grow, and make an impact. #engineeringforthebetter Please note: This position is based in the United States and does not offer visa or work sponsorship. Applicants must be authorized to work in the U.S. without current or future sponsorship. GEA Group is committed to fostering an inclusive work environment where all clients and employees feel welcomed, accepted, and valued. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Did we spark your interest? Then please click apply above to access our guided application process.

Location: Anywhere in Country At EY, we're all in to shape your future with confidence. We'll help you succeed in a globally connected powerhouse of diverse teams and take your career wherever you want it to go. Join EY and help to build a better working world. Technology - Data and Decision Science - AI Native Engineering AI/Machine Learning Engineer, Manager Consultant Power & Utilities Sector The opportunity Our Artificial Intelligence and Data team helps apply cutting-edge technology and techniques to bring solutions to our clients. As part of that, you'll sit side-by-side with clients and diverse teams from EY to create a well-rounded approach to advising and solving challenging problems, some of which have not been solved before. No two days will be the same, and with constant research and development, you'll find yourself building knowledge that can be applied across a wide range of projects now, and in the future. You'll need to have a passion for continuous learning, stay ahead of the trends, and influence new ways of working so you can position solutions in the most relevant and innovative way for our clients. You can expect heavy client interaction in a fast-paced environment and the opportunity to develop your own career path for your unique skills and ambitions. In this role, you will research, build, and implement scalable artificial intelligence systems that learn and make predictions tailored to business requirements across various environments, including cloud and on premises. You will enhance data pipelines and storage, ensuring data is clean, accurate, and optimized for XOps processes. Additionally, you will monitor and evaluate learning processes to continuously improve high-performance models, collaborating with other data and analytics professionals to industrialize analysis into effective analytics solutions. Within Power & Utilities engagements, these solutions will commonly support regulated environments such as electric, gas, and water utilities, addressing domains including grid and asset reliability, outage prediction and response, capital planning, customer operations, regulatory reporting, and operational efficiency across generation, transmission, distribution, and field operations. Your key responsibilities As a Manager in AI Native Engineering, you will play a pivotal role in delivering innovative solutions that drive business success. You will work with a wide variety of clients to deliver the latest data science and big data technologies. Your teams will design and build scalable solutions that unify, enrich, and derive insights from varied data sources across a broad technology landscape. You will help our clients navigate the complex world of modern data science, analytics, and software engineering. We'll look to you to provide guidance and perform technical development tasks to ensure data science solutions are properly engineered and maintained to support the ongoing business needs of our clients. You will be joining a dynamic and interdisciplinary team of scientists and engineers who love to tackle the most challenging computational problems for our clients. We love to think creatively, build applications efficiently, and collaborate in both the ideation of solutions and the pursuit of new opportunities. Many on our team have advanced academic degrees or equivalent experience in industry. In Power & Utilities contexts, this includes working with business, IT, and operations leaders to translate regulated utility priorities-such as safety, reliability, affordability, and compliance-into scalable AI-enabled solutions. Your responsibilities will include: * Leading workstream delivery and ensuring the effective management of processes and projects. * Continuously improving processes by identifying innovative solutions through research and analysis. * Managing professional employees and supervising teams to deliver complex technical initiatives, with accountability for performance and results. * Engaging actively with clients, participating in daily working sessions, and leading workstreams from planning through execution to closure. * Identifying opportunities for additional services and managing engagement economics. * Designing and delivering AI/ML use cases relevant to Power & Utilities, such as asset health and failure prediction, outage detection and restoration optimization, vegetation management analytics, demand forecasting, load and DER forecasting, predictive maintenance, customer operations optimization, and regulatory analytics. * Working with utility data sources including SCADA, AMI/AMI 2.0, GIS, EAM (e.g., Maximo), OMS, CIS, and historian systems, and integrating these into modern analytics platforms. * Supporting utilities in moving AI solutions from pilots to production while meeting regulatory, audit, cybersecurity, and data governance requirements. Skills and attributes for success To excel in this role, you will need a blend of technical expertise and strong interpersonal skills. This role will work to deliver tech at speed, innovate at scale and put humans at the center. Provide technical guidance and share knowledge with team members with diverse skills and backgrounds. Consistently deliver quality client services focusing on more complex, judgmental and/or specialized issues surrounding emerging technology. Demonstrate technical capabilities and professional knowledge. Learn about EY and its service lines and actively assess and present ways to apply knowledge and services For Power & Utilities clients, success also requires an understanding of regulated operating models, risk tolerance, safety culture, rate cases, capital programs, and long asset lifecycles, and the ability to align AI outcomes to these realities. * Proven ability to develop solutions to complex problems and recommend changes to policies and procedures. * Strong judgment in selecting methods and techniques for obtaining results. * Experience in managing client relationships and delivering high-quality service. * Ability to lead teams effectively and manage change within the organization. * Ability to translate AI and analytics outputs into business-relevant insights for utility executives, regulators, and operational leaders. * Comfort operating in highly regulated environments with strong governance, documentation, explainability, and model risk management expectations. To qualify for the role, you must have * A Bachelor's degree required (4-year degree). * 6-10 years of relevant experience of full-time working experience in AI, Data Science, and/or Machine Learning * 2-4 years of experience directly managing technical teams * Strong skills in Python * Ability lead, collaborate, and communicate effectively with diverse, hybrid and global teams * Experience designing, building, and maintaining high-impact, high-value production AI/ML solutions on a major cloud platform * Proficient in Generative AI models and frameworks (e.g., OpenAI, Dall-e, Langchain, Retrieval Augmented Generation (RAG)) and experienced with ML packages like scikit-learn and PyTorch * Experience with natural language processing and deep learning * Extensive experience in DevOps tools (GIT, Azure DevOps), Agile methodologies (Jira), and CI/CD pipelines for developing, deploying, and scaling analytical solutions * Experience with MLOps and ML workflows, including data ingestion, transformation, and evaluation * Experience with model retraining and feedback loop methodologies * Experience with model and solution monitoring and reporting * Understanding of data structures, data modelling and software engineering best practices * Strong foundation in mathematics, statistics, and operations research, with proficiency in data manipulation tools (SQL, Pandas, Spark) and deep learning techniques * Excellent communication skills for conveying findings and recommendations, with a willingness to travel for client engagements * Skills in Technical Design Optimization * Strong relationship-building skills * Demonstrated client trust and value * Digital fluency and emotional agility * Commercial acumen and negotiation skills * Proven ability to lead teams and manage change * Experience delivering analytics or AI solutions in asset-intensive environments (e.g., utilities, energy, infrastructure, manufacturing, or transportation) is strongly preferred. * Familiarity with utility regulatory, compliance, or operational data considerations is a plus. Ideally, you'll also have * A deep understanding of and ability to teach concepts, tools, features, functions, and benefits of different approaches to apply them * Master's degree Computer Science, Mathematics, Physical Sciences, or other quantitative field * Experience working with diverse teams to deliver complex solutions * Strong skills in languages beyond Python: R, JavaScript, Java, C++, C * Experience fine-tuning Generative AI models * Experience in managing complex projects with multiple stakeholders * A strong understanding of industry trends and emerging technologies * Skills in data visualization and storytelling with data * Experience with image processing techniques and/or speech and audio processing and analysis * Exposure to Power & Utilities transformation programs, such as grid modernization, advanced metering, wildfire mitigation, energy transition, DER integration, or digital operations initiatives. * Experience supporting executive-level decision-making in regulated environments, including preparation of materials that may be reviewed by regulators or governing bodies. What we look for We seek individuals who are not only technically proficient but also possess the ability to think critically and creatively. Top performers demonstrate a commitment to excellence, a collaborative spirit, and a passion for driving innovation in the field of AI and data science. Your ability to collaborate effectively and communicate with clarity will set you apart as a leader in our team. In the Power & Utilities sector, we value leaders who can balance innovation with reliability, speed with safety, and advanced analytics with regulatory and operational realities delivering AI solutions that utilities can trust, scale, and defend. What we offer you At EY, we'll develop you with future-focused skills and equip you with world-class experiences. We'll empower you in a flexible environment, and fuel you and your extraordinary talents in a diverse and inclusive culture of globally connected teams. Learn more . * We offer a comprehensive compensation and benefits package where you'll be rewarded based on your performance and recognized for the value you bring to the business. The base salary range for this job in all geographic locations in the US is $125,500 to $230,200. The base salary range for New York City Metro Area, Washington State and California (excluding Sacramento) is $150,700 to $261,600. Individual salaries within those ranges are determined through a wide variety of factors including but not limited to education, experience, knowledge, skills and geography. In addition, our Total Rewards package includes medical and dental coverage, pension and 401(k) plans, and a wide range of paid time off options. * Join us in our team-led and leader-enabled hybrid model. Our expectation is for most people in external, client serving roles to work together in person 40-60% of the time over the course of an engagement, project or year. * Under our flexible vacation policy, you'll decide how much vacation time you need based on your own personal circumstances. You'll also be granted time off for designated EY Paid Holidays, Winter/Summer breaks, Personal/Family Care, and other leaves of absence when needed to support your physical, financial, and emotional well-being. Are you ready to shape your future with confidence? Apply today. EY accepts applications for this position on an on-going basis. For those living in California, please click here for additional information. EY focuses on high-ethical standards and integrity among its employees and expects all candidates to demonstrate these qualities. EY | Building a better working world EY is building a better working world by creating new value for clients, people, society and the planet, while building trust in capital markets. Enabled by data, AI and advanced technology, EY teams help clients shape the future with confidence and develop answers for the most pressing issues of today and tomorrow. EY teams work across a full spectrum of services in assurance, consulting, tax, strategy and transactions. Fueled by sector insights, a globally connected, multi-disciplinary network and diverse ecosystem partners, EY teams can provide services in more than 150 countries and territories. EY provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, genetic information, national origin, protected veteran status, disability status, or any other legally protected basis, including arrest and conviction records, in accordance with applicable law. EY is committed to providing reasonable accommodation to qualified individuals with disabilities including veterans with disabilities. If you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY's Talent Shared Services Team (TSS) or email the TSS at .