Trabajos welding en Rochester, New YorkCrear alertas

We are looking for a Pipefitter to join our Advanced Materials & Chemicals department in Rochester, New York. As a Pipefitter you will perform the following duties: • Provide multi-discipline capability to repair, maintain, install and make improvements on chemical processing equipment and building services (includes process piping, building service piping, pneumatics, and hydraulics)., • Work with variety of materials and piping system components (stainless steel, steel, glass-lined, plastic, copper, fibercast, etc.), • Achieve a high level of process expertise to effectively troubleshoot and repair equipment, including root cause analysis., • Maintenance of steam traps, specialized valves, filtration systems, steam ejectors, and other specialized equipment., • Execute preventive and predictive maintenance programs. Requirements: • Dependable, maintain good attendance, • Working knowledge of Microsoft Office and maintenance software tools., • Flexibility to change based on priorities., • Some experience or expertise in mechanical, HVAC equipment and process controls would be a plus., • Welding certification a plus., • Maintain a clean work area and operate in a safe manner at all times., • Must demonstrate effective analytical troubleshooting skills., • Able to read pipe and machine drawings., • Understanding of piping codes for hazardous environments (flammable liquids)., • Ability to work effectively with minimal supervision., • Excellent safety record – places safety and environment as top priority in all work., • Knowledge of Lock Out / Tag Out., • Good communication skills – daily communications with leaders, maintenance planner, technical staff, engineering and operations as needed., • Team player – willing to be flexible, often work in other areas and with other trades as needed to support maintenance team., • Significant walking, climbing stairs or other means of mobility., • Ability to reach, bend, stoop, push and/or pull, and frequently lift up to 30 pounds and occasionally lift/move 40 pounds., • Ability to work off of ladders or scaffolding, and in awkward positions., • Indoor and outdoor work assignments., • Wear protective clothing and/or Personal Protective Equipment required by the work environment or governmental regulations. Other Qualifications: • Graduate of apprentice program or equivalent demonstrated skill level., • High school diploma., • Work hours: o Monday – Friday, 8-hour days (40 hours/week). o Willing to work some overtime, as needed, to support production.

NOW HIRING- Part-Time Bench Jeweler Join a Growing Rochester Legacy Third-generation, family-owned jeweler proudly serving the community since 1928. Known for our craftsmanship, integrity, and exceptional customer care, we’re seeking a skilled and detail-oriented Bench Jeweler to join our team. Details • Pay: $30–$35/hour based on experience + Bonus, • Flexible hours based on repair work & custom work load, • Minimum 20 hours/week, with opportunity for extra hours, • Potential to grow into a full-time position Requirements • Strong repair and restoration skills across gold, platinum, and sterling silver, • Proficiency in stone setting (fancy and round stones), • Skilled in torch and laser solder/welding, re-tipping, polishing, and rhodium plating, • Experience with Geller repair book a plus, • Experience with watch battery replacement and band adjustments a plus

By 2000, Rochester 100• began research into ultrasonic polypropylene welding machines and developed a patented method for welding polypropylene material.With this patented method, Rochester 100• began manufacturing NICKY'S• Folders as a better quality alternative to paper folders.Rochester 100

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

Use specialized machinery for industrial welding and oversee machines that perform the same job.

SUMMARY: Under limited supervision, sets up, operates, and adjusts various types of conventional or automatic machines including lathes, drill presses, grinders, and other precision equipment. Works from drawings and written instructions to create replacement and new parts in making repairs to metal parts as well as for experimental apparatus or prototype equipment. Work is typically not routine and normally require analysis to understand JOB DUTIES • Machines parts to specifications, using machine tools such as lathes, milling machines, shapers or grinders. Sets up, adjusts or operates basic or specialized machine tools used to perform precision machining operations., • Monitors the feed and speed of machines during the machining process. Maintains machine tools in proper operational condition. Operates equipment to verify operationalefficiency., • Studies sample parts, blueprints, drawings or engineering information to determine methods or sequences of operations needed to fabricate products., • Programs computers or electronic instruments, such as numerically controlled machine tools. Diagnoses machine tool malfunctions to determine need for adjustments or repairs., • Lays out, measures and marks metal stock to display placement of cuts. Fits and assembles parts to make or repair machine tools. Sets up or operates metalworking, brazing, heat-treating, welding or cutting equipment., • Installs repaired parts into equipment or install new equipment. Checks work pieces to ensure that they are properly lubricated or cooled., • Designs fixtures, tooling or experimental parts to meet special engineering needs., • Supports metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics. Prepare working sketches for the illustration of product appearance., • Tests experimental models under simulated operating conditions for purposes such as development, standardization or feasibility of design. Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants or batteries into machines or mechanisms., • May assist with low level employees and provide knowledge to troubleshooting needs., • Performs other duties as assigned. EDUCATION & EXPERIENCE Typically requires a high school diploma or GED and five (5) or more years of shop experience or an equivalent combination. KNOWLEDGE, SKILLS, ABILITIES • Knowledge of various metals and measurements used in machining processes required., • Knowledge of machinist, CAD and/or CAM software required., • Knowledge of raw materials, production processes, quality control, costs and other techniques for maximizing the effective manufacture and distribution of goods required., • Knowledge of monitoring gauges, dials or other indicators to make sure a machine is working properly required., • Requires broad knowledge of operational procedures and tools obtained through extensive work experience., • Advanced Milling experience on Acer and Proto Track knee mills, • Proficient MIG/TIG welder on both aluminum and stainless steel, • Advanced WEDM experience PHYSICAL DEMANDS: Requires manual dexterity, arm-hand steadiness, and multi-limb coordination. Ability to lift 50 pounds or more and stand for extended periods of time. COMPANY INFORMATION: Motion offers an excellent benefits package which includes options for healthcare coverage, 401(k), tuition, reimbursement, vacation, sick, and holiday pay. Please keep in mind that this range is the base pay only and does not consider other components that make up the total rewards package for the position. If you are hired at Motion, your overall compensation will be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. • Pay: $29.77 - $38.70 / hour\n Not the right fit? Let us know you're interested in a future opportunity by joining our Talent Community on jobs.genpt.com or create an account to set up email alerts as new job postings become available that meet your interest! GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Job Description TOOL CRIB ATTENDANT Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a Tool Crib Attendant. The Tool Crib Attendant is responsible for maintaining accurate inventory of the shop tools and equipment, as well as repairing or replacing tools or equipment as needed. Successful candidates will possess: • A HS Diploma or GED and 5 years of Tool Crib/Inventory experience;, • Ability to track and maintain tool inventory levels;, • Capacity to investigate tool quality problems and recommend and/or implement changes or improvements in tooling processes or methods;, • Excellent communication skills to work with outside tooling vendors and co-workers;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to crouch, stoop or stand, removing or placing items on shelves, and operate a computer;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $17.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a Material Handler. The Material Handler is responsible for moving materials, parts and skids throughout the facility. Successful candidates will possess: • A HS Diploma or GED;, • 4 years of previous forklift operation in a manufacturing environment;, • Ability to safely and efficiently use a forklift to move throughout the facility and in and out of trucks;, • Ability to manage the incoming and outgoing scrap program;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to move and off of a forklift, using hand and foot controls;, • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available; Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description CNC SET UP/OPERATOR - B SHIFT Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Set Up/Operator. The CNC Set Up/Operator is responsible for the set up and observation of machines to verify the accuracy of the machine settings and to detect the malfunction or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Set Up/Operator is responsible for the set and controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling, chamfering, and deburring. Successful candidates will possess: • A HS Diploma or GED;, • 5 years of previous CNC set up and operation experience;, • Experience on Mazak or Haas machines;, • Thorough operational knowledge and skills specific to CNC Mills or CNC Lathers with the ability to calculate and set machine controls either manually or by entering commands;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to stand for extended periods, lift heavy items, and operate equipment;, • Ability to work with limited supervision. What we offer: • Monday through Thursday 3:45 pm to 2:15 am;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description CNC SET UP/OPERATOR - A SHIFT Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Set Up/Operator. The CNC Set Up/Operator is responsible for the set up and observation of machines to verify the accuracy of the machine settings and to detect the malfunction or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Set Up/Operator is responsible for the set and controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling, chamfering, and deburring. Successful candidates will possess: • A HS Diploma or GED;, • 5 years of previous CNC set up and operation experience;, • Experience on Mazak or Haas machines;, • Thorough operational knowledge and skills specific to CNC Mills or CNC Lathers with the ability to calculate and set machine controls either manually or by entering commands;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to stand for extended periods, lift heavy items, and operate equipment;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description Small Bus Technician/Mechanic (RTS Access) Starting Pay:$27.75per hour Schedule: Monday through Friday 4:30 PM to 12:30 AM Why Work With Us • Stable, consistent work no flat rate; steady weekly pay, • Tools and training provided stay current with the latest technology, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Inspect and test equipment at prescribed intervals of time and usage or upon malfunction or breakdown., • Disassemble, inspect, and replace worn or broken parts., • Fit and adjust new or repaired parts., • Test drive vehicles for diagnosis and completed repair., • Notify supervisor of potentially dangerous equipment and corrective action to be taken. Education/Experience • Graduation from high school or possession of a GED required., • Vehicle maintenance experience and/or vocational training in automotive or diesel mechanics preferred., • CDL Class "B" License or Permit with passenger endorsement desired but not required. (Must obtain Class "B" permit prior to start date)., • Clean driving record., • Ability to diagnose and repair body electronic systems and engine electronic systems, • Ability to diagnose and repair air conditioning systems, • Diesel experience would be helpful but not required, • Experience in hydraulic brake and air brake systems, • Must be capable of replacing, bleeding and adjusting brake shoes, pads, rotors, wheel bearings and calipers, • Experience in a variety of electrical systems including charging, cranking, lights, interlock and lift systems, • Familiar with the use of tire equipment for mounting and balancing wheels, • Use of torches and welding equipment needed at times, • Must become familiar with the operation of our fleet maintenance software system and properly utilize it, • Ability to receive correction and follow directions as well as being self-managing, • Strong computer literacy skills The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description • Visually inspect and test machinery and equipment. · Listen for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to troubleshoot and diagnose problem or repair the machine. • Dismantle defective machines and equipment and installs new or repaired parts., • Clean and lubricate shafts, bearings, gears, and other parts of machinery. · Install and repair electrical apparatus such as transformers and wiring, and electrical and electronic components of machinery and equipment. · Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment. • Repairs and maintains physical structure of all facility equipment and grounds., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers., • Sets up and operates machine tools such as a lathe, grinder, drill, and milling machine to repair or fabricate machine parts, jigs, fixtures, and tools., • Operates cutting torch or welding equipment to cut or join metal parts., • Fabricates and repairs counters, benches, partitions, and other wooden structures., • Completes other special assignments as required., • Review work orders to determine immediate actions required., • Perform assigned preventative maintenance on a timely basis., • Operate forklift, lift truck, and scissor lift. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department. 2:45 p.m.-11:15 p.m.

Job Description Position:Manufacturing/Production Engineer Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Manage engineering and project management effort for the company. This includes scheduling and completing engineering tasks on time and within budget. Administer Engineering document control. Supervise, mentor and train subordinates. Communicate with customers and production to ensure conforming product. Plan and allocate jobs. Resolve conflicts to meet deadlines. Minimum Qualifications: • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word and Excel, • Strong knowledge of best practices, methods and techniques pertaining to building, facilities and equipment maintenance and repair, • A minimum of five years relevant experience, • Degree in Mechanical Engineering or other related field required Supervisory Specific Duties: • Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production., • Review all new project release packages to verify that customers’ specifications are achievable., • Participate in new product launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures., • Recommend continuous improvements actions for improving work processes. Departmental Specific Duties: • Quoting/Cost Estimating including; developing a Bill of Materials (BOM) for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Responsible for developing the manufacturing process for all parts. Assist operators with questions and provide technical advice., • Work with Production to improve efficiency on new and existing jobs, • Drive process improvements to generate cost reduction ideas., • Monitor actual job cost vs quoted job cost, • Help write the process sheets (travelers) for each job, • Analyze and improve processes for time/cost efficiencies, • Establish and maintain “machine utilization status”, • Help to create new travelers and/or modify existing travelers as per post program evaluation meetings, • Design machining, welding, inspection and assembly fixtures, • Help provide technical direction to operators as needed, • Supervise tools, fixtures, etc. if need, • Maintain engineering drawing and program files, • Must collaborate with customers to achieve desired results, • Provide engineering support to meet production schedules This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Bus Technician / Mechanic I - Garage Nights Alignments Starting Pay: $ 32.21 Top Rate Within 3 Years: $40.27/hour AVAILABLE SHIFT:Sunday-Thursday, 11:00pm-7:30am (Friday and Saturday off) Union Representation: ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Tools and training provided stay current with the latest technology, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Maintain, repair, and overhaul RTS buses and fleet vehicles., • Perform inspections, diagnostics, and preventive maintenance., • Identify and repair mechanical, electrical, and pneumatic issues., • Replace and adjust parts; complete necessary testing, including test drives., • Use diagnostic software and tools (e.g., AssetWorks, Cummins InSite, Allison)., • Complete welding, brazing, cutting torch work, and assist with towing/road calls., • Conduct safety inspections and ensure proper documentation., • Perform alignments and support repairs on articulated and standard buses., • Work safely, efficiently, and meet competency standards., • Must have own tools, • Must obtain a NYS CDL Class B permit with passenger & air brake endorsements before start, and full Class B license within 90 days, • Must obtain a CDL Class A permit and towing endorsement (may be after hire) and full Class A license within 90 days of permit Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Technician I, Garage Days Starting Pay:$ 32.21/hour Top Rate Within 3 Years:$40.27/hour AVAILABLE SHIFT:7:00am 3:30pm Monday, Thursday - Sunday 7:00am 3:30pm DAYS OFF: Tuesday and Wednesday Union Representation:ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Tools and training provided stay current with the latest technology, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor, • Must be able to perform proper front wheel alignments in order to maximize tire mileage on Articulated Buses, 40 Foot Buses and Non-Revenue Vehicles as required, • Must be able to perform proper front-wheel alignments to maximize tire life on articulated buses, 40-foot buses, and non-revenue vehicles, • May be assigned articulated bus repairs and overhauls, ramp and battery PM inspections and repairs, as well as other garage work, road calls, and towing as needed Education/Experience • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Bus Technician / Mechanic I - (Evenings & Weekends) Starting Pay:$ 32.21 Top Rate Within 3 Years:$40.27/hour AVAILABLE SHIFT:Sunday, Monday, Thursday 3:00pm 11:30pm. Friday and Saturday 5:00pm 2:00am. With Tuesday and Wednesday OFF Union Representation:ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Tools and training provided stay current with the latest technology, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor Education/Experience • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Bus Technician / Mechanic I (3rd Shift - Thursday & Friday Off) Starting Pay: $ 32.21 Top Rate Within 3 Years: $40.27/hour Schedule: Monday, Tuesday, Wednesday, 11:00pm-7:30am, Saturday &Sunday, 5:00pm-2:00am (Thursday and Friday off) Union Representation: ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Tools and training provided stay current with the latest technology, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor Education/Experience • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionEncorus Group is excited to expand our presence with a new office in Rochester! We’re looking for an experienced Mechanical Integrity Inspector to join our growing team. In this role, you'll conduct inspections, assessments, and compliance activities that support safe, reliable operations for our clients. You’ll work independently while being backed by a team recognized for its strong Mechanical Integrity expertise. This is a hands-on opportunity offering long-term stability, a focus on high-quality work, and the chance to make a meaningful impact every day. Responsibilities: • Perform field inspection and testing services for fixed equipment which may include, but not limited to API-510 Pressure Vessels, API-570 Process Piping and API-653 / STI SP001 Storage Tanks, • Perform non-destructive examinations using company-certified methods., • Utilize software (UltraPipe, Excel) and governing standards to assess the fitness for service and remaining life of inspected equipment., • Produce accurate isometric drawings of piping and equipment using AutoCAD., • Communicate with customers regarding project setup, schedule, equipment needs, and inspection results., • Locate, read, and understand the federal, state, and local requirements governing the equipment being evaluated., • Read and interpret Process and Instrumentation Drawings (P&ID)., • Use appropriate personal protective equipment (PPE), including respirators, and follow health and safety practices., • Perform routine maintenance on designated test equipment, such as ultrasonic equipment and air monitors.Qualifications:, • Over 5 years of experience in Mechanical Integrity Inspection, Nondestructive Examination (NDE), or a closely related field, • High school diploma required; an Associate's or Bachelor’s degree in engineering or a related technical discipline is preferred, • At least one of the following certifications is required (more are preferred): API 510, API 570, and/or API 653; Level II qualification in MT, PT, UT, UTT, or ET, AWS Certified Welding Inspector (CWI) certification, • Proficient in AutoCAD, Microsoft Word, and Excel, • Valid driver's license with the ability to operate a motor vehicle for field testing and inspections, • Willingness and ability to travel locally and nationally on a regular basis, • Ability to pass a drug screening and vision test Join Us! At Encorus, we value innovation, collaboration, and professional development. We offer a competitive benefits package, opportunities for career advancement, and paid training. Powered by JazzHR aimqkZQN8l

Job Description CNC OPERATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Operator. The CNC Operator is responsible for the observation of machines to verify the accuracy of the machine settings and to detect the malfunction or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Operator is responsible for the controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling and deburring and the completion of first piece and in-process inspections. Successful candidates will possess: • A HS Diploma or GED;, • 6-months of machining experience;, • Ability to learn skills specific to CNC Mills or CNC Lathers along with the ability to calculate and set machine controls either manually or by entering commands;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to stand for extended periods, lift heavy items, and operate equipment;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $17.00 - $29.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description CNC MACHINIST - A SHIFT Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Set Up/Operator. The CNC Set Up/Operator is responsible for the set up and observation of machines to verify the accuracy of the machine settings and to detect the malfunction or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Set Up/Operator is responsible for the set and controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling, chamfering, and deburring. Successful candidates will possess: • A HS Diploma or GED;, • 5 years of previous CNC set up and operation experience;, • Experience on Mazak or Haas machines;, • Thorough operational knowledge and skills specific to CNC Mills or CNC Lathers with the ability to calculate and set machine controls either manually or by entering commands;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to stand for extended periods, lift heavy items, and operate equipment;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description CNC PROGRAMMER Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Programmer. The CNC Programmer is responsible for generating programs for milling centers, turning centers and multi-tasking CNC equipment, while updating and managing CNC programs and manufacturing processes to consistently produce precision products. Successful candidates will possess: • A HS Diploma or GED and 5 years of experience or an Associates’ Degree in Industrial Technologies;, • Experience with Mazatrol and Fanuc, is a plus;, • The CAD skills to create work holding and fixturing layouts, program CNC machine tools using Solid Works, Mastercam Programming software and create geometry as needed;, • Thorough operational knowledge and skills specific to CNC Mills or CNC Lathers with the ability to calculate and set machine controls either manually or by entering commands;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $28.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're growing and looking for Certified Welding Inspectors (CWI) to join our team! As a Certified Welding Inspector, you will have the opportunity for professional growth and advancement with competitive pay. Certified Welding Inspector (CWI) Perks & Benefits: • Competitive Pay, • Competitive Health Insurance, • Paid training and certification with cash bonuses for successful completion, • Advancement career and opportunity planning, • Company vehicle for travel to project sites, • Paid Vacations/Sick/Personal/Holidays, • Safety training and equipment provided, • Strong written and verbal communication skills, • Must be able to lift a minimum of 50 pounds, work from aerial lifts, ladders, scaffolding, and at high elevations., • Proficient in Microsoft Office, • Ability to work with AWS & AISC codes, • Structural inspection, including welding and bolting operations at fabrication facilities and active construction sites throughout New York State., • Perform special inspections in accordance with the applicable building code requirements., • Review project plans and specifications., • Review and perform welding procedure and performance qualification testing.

Job Description Join a world-class organization that values its employees, which is why they have a less than 2% turnover rate. If you currently are an Overhead Crane Mechanic / Technician this is a company you should learn more about. EXCELLENT BENEFITS! What we offer: • Health, Dental, and Vision Coverage, • Paid travel time to/from job sites, • Company vehicle provided for travel to/from job sites, • Meal allowance per day and business expense reimbursement for travel, • 401K% Match, • Time and ½ paid for hours worked after 8 each day as well as hours worked on Sat. and double time for hours worked on Sun. and holidays, • Long- and Short-Term Disability, • Life Insurance, • Paid Vacation & Holidays, • Paid Training, • Growth & Advancement Opportunities, • On-going Training & Development, • Tools and Uniform reimbursement, • Company cell phone provided when traveling to job site Responsibilities: • Read mechanical schematics and perform basic mechanical troubleshooting, • Read mechanical and machinist blueprints, and precision measuring instruments, then document findings on appropriate paperwork, • Perform mechanical and welding type duties on an as needed basis and meet all requirements such as welding specs, rigging, assembling cranes, • Troubleshoot all sizes and types of cranes and mechanically determine problems and take corrective action, • Provide Service Manager with accurate and complete information on mechanical machinery in order to install/replace/order replacement parts, • Minimum 3 year overhead crane mechanic OR industrial electrical background, • Ability to complete required nuclear site access, • Basic knowledge of machinery and tools including their design, uses, repairs and maintenance, • Experience with motors and gear boxes, • Experience with 3 phase motor controls, • Experience with PLCs up to 480v, • Experience with crane maintenance (preferred) CONNECT WITH US TODAY TO LEARN MORE ABOUT THIS OPPORTUNITY!

Job Description • Visually inspect and test machinery and equipment. · Listen for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to troubleshoot and diagnose problem or repair the machine. • Dismantle defective machines and equipment and installs new or repaired parts., • Clean and lubricate shafts, bearings, gears, and other parts of machinery. · Install and repair electrical apparatus such as transformers and wiring, and electrical and electronic components of machinery and equipment. · Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment. • Repairs and maintains physical structure of all facility equipment and grounds., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers., • Sets up and operates machine tools such as a lathe, grinder, drill, and milling machine to repair or fabricate machine parts, jigs, fixtures, and tools., • Operates cutting torch or welding equipment to cut or join metal parts., • Fabricates and repairs counters, benches, partitions, and other wooden structures., • Completes other special assignments as required., • Review work orders to determine immediate actions required., • Perform assigned preventative maintenance on a timely basis., • Operate forklift, lift truck, and scissor lift. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department. 10:45 p.m.-7:15 a.m.

Job Description Tasks and Responsibilities: Sets up and operates electric and gas welding machines to weld metal parts according to work order, blueprint layouts and verbal instructions Regulates flow of gases for proper mixture Maintains recordkeeping of setting from precision tig control panels on power packs for repeat applications. Cleans parts to remove contamination before welding Sets up and operates all phases of welding applications using clamps, fixtures and torches, working to specified tolerances Performs grinding/testing duties (drain pans, tanks, etc.) Assembles assigned parts in accordance with production guidelines Moves material with appropriate equipment (forklift, hand truck) throughout the work area as needed Completes standard job sheets for each job Changes weld cups, electrodes and any other tooling to maintain quality and production standards Completes standard job sheets for each job Changes weld cups, electrodes and any other tooling to maintain quality and production standards Examines electrodes for sharpness and sharpen as needed Assists management recommending tooling needs Measures and sets up jobs according to blueprints as required Reports any discrepancies in material to management Notifies management of any equipment or area repairs needed Maintains tools, gauges and equipment in a clean, orderly and safe manner Complies with company policies and procedures giving special attention to safety regulations Wears protective clothing and equipment in accordance with safety guidelines Ability to distinguish colors Ability to read and understand the English language Other duties may be assigned.

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: • Intermediate level professional, • Two years or more of professional experience in a manufacturing business environment, • Five years or more of manufacturing/sheet metal/welding fabrication knowledge, • CNC machining / programming background is a plus, • A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: • Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage’s, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual job cost vs. quoted job cost, • Drive process improvements to generate cost reduction, • Help write the process sheets (Travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed Measurement Tools: • On time delivery to customers, • Quality performance, • Decrease in job setup time on turret, mills and lathes, • Cost savings for production; including tooling, • Project management and document control organization skills, • Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Company Information: Regional Transit Service (RTS) is a regional transit authority established by New York State with more than 1,000 employees who proudly serve customers and business partners in Monroe, Genesee, Livingston, Ontario, Orleans, Seneca, Wayne, and Wyoming counties. Recognized as one of the best-run transit systems in the nation, RTS partners with the community it serves to provide vital, safe, and sustainable transportation services to nearly 8 million people each year. We carry out our mission by connecting our customers to jobs, school, healthcare, shopping, and recreational activities every day. Why you should join the RTS Team! • Consistent weekly pay: productivity is measured on quality not flat rate., • Career Longevity and opportunities for growth, • Work/life balance. "Work to live, not live to work.", • Job security. Public Transportation is a long-term solution to climate change policy., • Cutting-edge internal technical training department. We support you., • Vehicles contain the latest technology. We provide the tools and equipment to help you succeed., • Collaborative and positive work environment with a culture that promotes your success. We focus on making you the best version of yourself! Other great benefits include: • Excellent HealthBenefits Medical, Dental, Vision, • Top compensation and pension plan, • Work boot & tool allowance, • On-site 24/7Fitness and Wellness Center and Well-Being Program, • Employee Assistance Program (Counseling, Health Advocacy, Financial & Legal Consultation, Health Coaching, Virtual Concierge, Discounts), • Culture & Inclusion Council JOB SUMMARY:This position will diagnose and perform all major repairs to mechanical, pneumatic, hydraulic, and electrical systems on our fleet equipment. COMPENSATION:Starting rate is $28.18per hour. You will reach top rate within 3 years (current top rate for 2025is $40.27) This is a Union environment in association with the Amalgamated Transit Union, Local 282. AVAILABLE SHIFT:Sunday-Thursday, 11:00pm-7:30am (Friday and Saturday off). DUTIES & RESPONSIBILITIES: • Maintain, repair, and overhaul buses in the RTS fleet., • Inspect and test equipment at prescribed intervals of time and usage or upon malfunction or breakdown., • Disassemble, inspect, and replace worn or broken parts.Fit and adjust new or repaired parts., • Test drive repaired equipment., • Notify supervisor of potentially dangerous equipment and corrective action to be taken., • Must be able to operate electronic diagnostic equipment i.e., computers, Cummins InSite, Allison, etc., • Must be able to do acetylene and electric welding, brazing, and operate a cutting torch., • Drive facility tow truck to retrieve disabled vehicles away from facility., • Performs other related duties as assigned. REQUIREMENTS: Minimum of two (2) years of attendance at an accredited diesel mechanics school, in addition, may also have completed a certified course of study of the same but not limited to:Auto Repair, Hydraulics, Diesel Engine Repairs, Battery Electric Vehicle Repairs, Electrical Systems Repair, Welding. OR Work experience, verifiable by employment records, may be substituted two years for one for educational requirement. Other Requirements: • Must have complete set of tools to perform all jobs assigned., • Must obtain a New York State CDL Class Bpermitwith passenger and air brake endorsement prior to start date.Must be able to obtain and maintain a New York State CDL Class B license with passenger and air brake endorsement within 90 days of date of hire., • Must possess a New York State CDL Class A permit with towing endorsement for vehicles with a Gross Combination Weight Rating over 26,000 lbs. (can obtain at a later date).Must be able to obtain and maintain a New York State CDL Class A license with towing endorsement for vehicles with a Gross Combination Weight Rating over 26,000 lbs. within 90 days of date of hire., • Will be required to pass post-offer physical., • English proficiency is required due to the safety-sensitive nature of this position. To ensure the safety of employees, customers and the general public, an employee holding this position must be able to read, speak and understand the English language. This proficiency is an essential requirement of this job due to the need to effectively communicate and collaborate with English speaking co-workers and supervisors regarding work and safety related matters and tasks. In addition, an employee in this role must be able to read and comprehend materials written in English such as, but not limited to, specifications, manuals and other job-related documents. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION: Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description METAL FINISHER Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a Metal Finisher. The Metal Finisher is responsible for reviewing blueprints and work orders to understand the product specifications, such as dimensions, tolerances, quantities, tolling instructions and fixturing. Successful candidates will possess: • A HS Diploma or GED;, • 3 years of manufacturing experience;, • Ability to set up and operate machinery or hand tools that grind, smooth or buff metal parts to achieve the specified finish;, • Familiarity with inspection criteria and the use of micrometers and gauges required to inspect the parts;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to stand for extended periods, lift heavy items, and operate equipment;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $19.00 - $25.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description CNC MACHINIST Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Machinist. The CNC Machinist is responsible for the set up and observation of machines to verify the accuracy of the machine settings and to detect the malfunction or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Machinist is responsible for the set and controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling, chamfering, and deburring. Successful candidates will possess: • A HS Diploma or GED;, • 5 years of previous CNC set up and operation experience;, • Experience on Mazak or Haas machines;, • Thorough operational knowledge and skills specific to CNC Mills or CNC Lathers with the ability to calculate and set machine controls either manually or by entering commands;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to stand for extended periods, lift heavy items, and operate equipment;, • Ability to work with limited supervision. What we offer: • Monday through Thursday 3:45 pm to 2:15 am;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description Job Title: Heavy Duty/ Equipment Mechanic Overview: Suit-Kote Corporation, a leading Asphalt products manufacturer, road construction and maintenance and asphalt application engineering company is seeking candidates for qualified auto and heavy equipment mechanics. Safety Expectations: All Suit-Kote employees are required to comply with all safety rules and to observe safe work practices and operating procedures at all times. Whenever on Suit-Kote property or job sites, or operating Suit- Kote equipment, employees are expected to conduct themselves in a manner that promotes the safety of the employee, co-workers and others. Responsibilities/Job Duties: • Diagnose and repair electrical, cooling, computer fuel, emissions, and hydraulic systems on HD trucks and trailers, • Diagnose and repair electrical, cooling, computer, emissions, fuel and hydraulic systems specialized on construction equipment ie. Chippers, pavers, rollers, mills, etc., • Follow paper-flow procedures, including documenting correct mileage/hours and safety procedures and complete and maintain maintenance records and job orders, • Routine maintenance such as: changing oil, checking batteries, safety inspections, brake repairs, and lubricating equipment., • Examine vehicles and equipment to determine if additional safety or repair work is needed. Required Skills/Abilities: • Supply own tool set for heavy highway construction equipment, • Reliable transportation to and from work, • Minimum of 5 years experience in industry or heavy-duty training, • Physical Organization and time management, • Must have or be willing to obtain an OSHA 10 Hour Safety Certificate, • Basic welding knowledge/ experience, • Willing to report to onsite repair orders, • Ability to work in a team setting, • Communicate clearly and effectively with team members Physical Requirements: • Flexibility in hours - overtime and weekend hours may be necessary, • Passing a pre-employment drug and alcohol screening is required and a background check will be conducted, • Must be able to lift up to 100 pounds, • Observe and comply with necessary PPE requirements, • Must be able to work in a noisy area with many odors present, • NYS Inspector's License, • Commercial Driver's License, • Obtain or willingness to obtain a Medical Card, • Ability to operate manual transmission or be willing to learn, • Ability to read and understand SDS, • Air brake certified, • Previous industry equipment training, • Willingness to obtain company provided forklift training, • Basic computer skills (Microsoft Office), • Basic math skills Salary Range: $25-$45 Additional Duties: This job description in no way states or implies that these are the only duties to be performed. You will be expected to follow any other job-related instructions and to perform other job-related duties as requested by your supervisor. Benefits: Suit-Kote offers competitive wages, paid time off, and a growth oriented work environment. We extend employer-paid medical and dental benefits, as well as employer-paid life insurance to all full-time employees. Road call differential pay available. Personnel are eligible for participation in our 401k plan as well as supplemental benefits. Equal Opportunity Employer/Veterans/Disabled Equal Opportunity Employer/Veterans/Disabled Job Posted by ApplicantPro

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description Under the direction of the Welding Group Leader or Supervisor, the Welder works from customer drawings and a traveler to fabricate and weld components to produce the highest quality products at the lowest cost, while meeting departmental performance standards, customer specifications and delivery requirements, in accordance with company policies and procedures. A Class A Welder is capable of performing all aspects of welding. Can weld any type of project while consistently meeting or exceeding cycle times. Have the ability to fabricate from prints without the aide of fixtures. Able to do prototypes while also working with engineering to develop fixtures. Capable of being certified. Requires little to no supervisor and has the ability to interpret blueprints and understands weld symbols at an advanced level. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Have the ability to regularly lift and/or move 25-50 pounds, • Meet minimum 20/20 vision standards (with corrective lenses if needed), • Score a minimum score on the in-house welding test, • Knowledge on how to set-up weld machine and lay a quality bead for both Mig and Tig, • Ability to read and understand blueprints and weld symbols at an advanced level, • Knowledge of the metric system preferred, • Accurately measure and lay out locations for welded components, • Adjust weld as needed to accommodate varying thicknesses of steel, • Operate grinder, drill, band saw, torch, • Complete and maintain all required paperwork, records, documentation, etc., • Using MIG and/or TIG, weld components together according to blueprints and Traveler, • While performing the duties of this job, the employee is regularly required to stand, use hands, stoop, kneel, or crouch., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus., • Must work at a reasonable pace (measured by production efficiency) and within our quality standards to insure timely completion, • Check and verify part numbers prior to assembly of product to customer specifications, • Must supply his/her own welding helmet and safety shoes

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Welder Your Role: The welder is responsible for welding various sheet metal parts to both commercial, AWS and ASME standards via customer drawings. The welder will use the following processes GTAW, GMAW-S and GMAW-P on common base metals such as, but not limited to Aluminum, Stainless Steel and Cold Rolled Steel. Reports To: Welding Supervisor Essential Functions: • Weld components using various techniques, • Follow and comply with all safety and work rules and regulations, • Proficiency with metal fabrication tools that are common with the Welding industry., • Maintain departmental housekeeping standards, • Good organizational, communication and problem-solving skills, • Proficiently read and interpret blueprints and technical drawings, • Perform quality checks to ensure that fabricated metal components meet the required standards and specifications., • Collaborate and work with team members to complete projects on time and according to customer requirements., • Rig and lift heavy objects safely, • 3+ years MIG/TIG welding experience and/or technical school or equivalent combination., • Highschool, GED or equivalent is required, • Familiarity with AWS standards preferred, • Proven experience as a fabricator/welder or similar role, • Understanding of welding symbols, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Compassion: We care for our talented and loyal PEKO family., • Safety: A commitment to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to a financially prudent organization., • Endurance: Fostering the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR XZOCxYPEr7

Job Description PRODUCTION CONTROL COORDINATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a Production Control Coordinator. The Production Control Coordinator will develop and implement project scheduling and strategy throughout the manufacturing process to successfully maintain production flow in support of our customers’ deadline. In addition, the coordinator communicates and coordinates with all departments to ensure a successful outcome for all projects Successful candidates will possess: • A HS Diploma or GED with equivalent work history;, • 5 years of production control experience;, • Previous experience with ERP Systems;, • Thorough operational knowledge of plant operations, while working under pressure and adhering to deadlines;, • Capacity to be diplomatic and possess good human interaction skills;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to walk for extended periods on the manufacturing floor;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $28.00 - $35.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job Description Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Sheet Metal Process Engineer Reports to: Fabrication Director Your Role: The Sheet Metal Process Engineer is responsible for shepherding products through the production process, while ensuring customer delivery and quality requirements are satisfied. This high impact role requires innovative thinking, a high sense of urgency and collaborating in a cross-functional environment. Responsibilities Include: • Develop and validate manufacturing processes for new products, including tooling, fixtures, and assembly methods., • Participate in design reviews to ensure manufacturability and cost-effectiveness., • Interpret and clarify engineering drawings, BOMs, and specifications for internal teams and external suppliers., • Serve as the primary point of contact for technical questions related to the TDP., • Ensure documentation is complete, accurate, and production-ready., • Define and optimize processes., • Support root cause analysis and corrective actions for production issues., • Implement lean manufacturing principles and continuous improvement initiatives., • Work closely with procurement, quality, and supplier engineering teams to ensure alignment on technical requirements., • Collaborate with design and R&D teams to ensure manufacturability of new products., • 5+ years hands-on experience of bending, forming, welding and finishing processes., • .AS/BS in relevant technical field., • Strong understanding of NPI processes and design-for-manufacturing (DFM) principles., • Familiarity with ERP and PLM systems., • Experience working with suppliers and contract manufacturers., • Proficiency in CAD software (e.g., SolidWorks) and manufacturing systems (e.g., PDM, Autodesk Vault, SW Composer)., • Knowledgeable in programming., • Proficiency in interpreting engineering drawings, GD&T, and BOMs., • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision ProductsA reasonable estimate of the compensation range for this position is $60,000.00 - $90,000.00 per year. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR UUQJBe6ntM

Job Description A family-owned business since 1924, A. Duie Pyle provides a range of integrated transportation and distribution solutions throughout the Northeast. Supported by our vast network of Less-Than-Truckload (LTL) service centers, warehouse facilities, and dedicated locations, we have the ability to offer flexible and seamless integrated solutions tailored to our customer’s needs. Simply put, when it comes to integrated supply chain solutions, Pyle People Deliver. Our promise is to provide outstanding service as it remains to be our first and foremost mission. Position Summary: As a Facilities Maintenance Technician for Pyle you will maintain safe, efficient, and productive building and grounds environment at all ADP properties as assigned by supervision/management. The responsibilities of the position include, but are not limited to: • Safely performing applicable building repairs and preventative maintenance (electrical, electronics, plumbing, HVAC, carpentry, etc.), • Maintaining and or troubleshooting routine electrical/burg/fire protection systems, devices, etc., • Maintaining commercial/industrial property components including but not limited to dock plates, overhead doors, fire pumps, fire suppression systems, HVAC filter & belt maintenance, domestic water systems, snow scraping devices, roofs and similar structures, UST/AST and delivery systems, truck./car and man gates and fencing, painting, cleaning, etc., • Maintaining company property grounds which may include but not limited to lawn care, landscaping, asphaltic and concrete surfaces, snow plowing/shoveling, • Operating forklifts, aerial work platforms and other operating equipment, • Performing property/facility visual inspections to include fire suppression devices, lighting, ingress/egress, OSHA, • Responding to after-hours/emergency calls at responsible property locations, • HS diploma or equivalent, • Clean, verifiable driving record (MVR), • Self-motivated, self-starter, • Verifiable skills in Facilities Maintenance arena, • Skills required include mechanical, plumbing, carpentry, electrical, welding, • Experience with gas/oil burners and hydraulics are beneficial, • Must be able to lift 50+ lbs., • Must be able to walk long distances, over diverse terrain, for long periods, • Must be able to climb ladders, work at height, or roofs as required, • Sitting at desk for long periods of time., • Viewing PC monitor and using keyboard for long periods of time., • Diverse settings can be external or internal, and during periods of inclement weather We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description ASSEMBLER Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as an Assembler. The Assembler is responsible for the assembly of product according to the project specifications, assisting with the final product preparation for delivery while visually inspecting parts and assembled pieces for defects. Successful candidates will possess: • A HS Diploma or GED;, • 1-2 years of previous manufacturing experience;, • Ability to use an air gun, air drivers, other hand and power tools and a pallet truck;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to sit for extended periods and manipulate items with dexterity;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans, • Vacation, Paid Sick Leave and Company Paid Holidays, • Company Paid Life Insurance, • Optional Short-Term and Long-Term Disability Available, • 401k with Company Match According to the New York Pay Transparency law, pay range for this job is $18.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job DescriptionAn award winning, woman-owned business that offers exceptional benefits to include:Medical and dental insurance available on day of hireCompany pays 63-70% of Excellus medical plans (no high deductible)401k participation after 30 days with company matchVacation and personal time off starting immediately Job DescriptionPrimary responsibility is to assist senior level technicians with diagnosing mechanical and electrical problems on production, telecommunication and maintenance equipment, and facility structures; assist with rebuilding necessary equipment components such as pumps, motors, glue pots, gear boxes, forklift trucks, printing presses, die cutting machines, etc.; assist with the installation of production equipment in accordance with the manufacturers’ mechanical and electrical specifications.Minimum Qualifications:Three years performing production equipment maintenance are required.High school diploma or equivalent experience.A working level knowledge of carpentry, plumbing, electricity, welding, and machining.Ability to read blueprints and electrical schematics are required.Analytical problem-solving skills are required.Mechanical aptitude and manual dexterity.Ability to operate hand and power tools.Ability to deal with people at all organizational levels.Must have a valid driver’s license. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Maintenance Technician 1 (2nd & 3rd Shift) Diamond Packaging, a global leader specializing in developing innovative and sustainable packaging solutions, is currently recruiting for a full time Maintenance Technician 1 in our Maintenance Department to join our team. Diamond Packaging is an award winning, woman-owned business that offers exceptional benefits to include: • Medical and dental insurance available on day of hire, • Company pays 63-70% of Excellus medical plans (no high deductible), • 401k participation after 30 days with company match, • Vacation and personal time off starting immediately Primary responsibility is to assist senior level technicians with diagnosing mechanical and electrical problems on production, telecommunication and maintenance equipment and facility structures. Assist with rebuilding necessary equipment components such as pumps, motors, glue pots, gear boxes, forklift trucks, printing presses, die cutting machines, etc. Assist with the installation of production equipment in accordance with the manufacturers’ mechanical and electrical specifications. Minimum Qualifications: • Three years performing production equipment maintenance are required., • High school diploma or equivalent experience., • A working level knowledge of carpentry, plumbing, electricity, welding, and machining., • Ability to read blueprints and electrical schematics are required., • Analytical problem-solving skills are required., • Mechanical aptitude and manual dexterity., • Ability to operate hand and power tools., • Ability to deal with people at all organizational levels.

Job Description Maintenance Technician 2 (2nd Shift) Diamond Packaging, a global leader specializing in developing innovative and sustainable packaging solutions, is currently recruiting for a full time Maintenance Technician 2 in our Maintenance Department to join our team. Diamond Packaging is an award winning, woman-owned business that offers exceptional benefits to include: • Medical and dental insurance available on day of hire, • Company pays 63-70% of Excellus medical plans (no high deductible), • 401k participation after 30 days with company match, • Vacation and personal time off starting immediately Primary responsibility is to assist senior level technicians with diagnosing mechanical and electrical problems on production, telecommunication and maintenance equipment and facility structures. Assist with rebuilding necessary equipment components such as pumps, motors, glue pots, gear boxes, forklift trucks, printing presses, die cutting machines, etc. Assist with the installation of production equipment in accordance with the manufacturers’ mechanical and electrical specifications. Minimum Qualifications: • Three years performing production equipment maintenance are required., • High school diploma or equivalent experience., • A working level knowledge of carpentry, plumbing, electricity, welding, and machining., • Ability to read blueprints and electrical schematics are required., • Analytical problem-solving skills are required., • Mechanical aptitude and manual dexterity., • Ability to operate hand and power tools., • Ability to deal with people at all organizational levels.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Maintenance Mechanic who performs mechanical repairs on all production and non-production equipment. Key Responsibilities: • Follows all safety process and procedures in accordance with the job and Company policy., • Interprets machine operation manuals and identifies problem source., • Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment., • Specifies and quotes replacement items for manufacturing equipment and facilities., • Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment., • Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing., • Construct simple facility improvement projects (door frames, shelving, partitions, etc.)., • Visually inspects and tests machinery and equipment., • Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery., • Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains the physical structure of the establishment., • Must possess own tools., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required., • Be able to respond to call-backs in emergency break down situations on an as needed basis., • Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry., • The noise level in the work environment is usually loud., • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionCMM OPERATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CMM Operator. The CMM Operator is responsible for setting up and executing current CMM Programs and performing first piece inspections. Successful candidates will possess: • A HS Diploma or GED;, • 3-5 years of combined previous experience checking parts on a CMM, quality control, and/or sheet metal/machining;, • Ability to operate and use tools such as Coordinate Measuring Machine (CMM), FabriVision, height gage, comparator and profilometer;, • Ability to read and interpret blueprints;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to sit for extended periods and operate a computer;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description About NYNE NYNE Mechanical, a division of NECI, is a team of talented problem solvers who can see beyond the immediate effect of a breakdown to the root cause. Our entrepreneurial culture encourages and rewards those who can think like our clients and make recommendations to improve their uptime performance. Here’s What You’ll Get • Highly competitive Medical, Dental, and Vision Insurance, • Flexible Spending or Health Savings Accounts, • Accrued Vacation Time, • 10 Paid Holidays, • 12 Paid Weeks Maternity Leave, • Pet Insurance, • Retirement Savings: 401(k) and Employee Stock Ownership Plan, • Employee Referral Bonus, • Professional Development Reimbursement, • Company Paid STD, LTD, and Life Insurance Field Service Technician – Join Our Growing Team! Are you a hands-on problem solver with a passion for mechanical work and safety? We’re looking for a Field Service Technician to play a key role in valve repair and service operations. In this position, you'll work on a variety of equipment, including safety pressure relief valves, actuators, and automation systems, ensuring top-quality repairs in the field and shop. What You'll Do: • Field Service Operations: Lead field repairs and testing, ensuring all work meets ASME Code and NBIC standards. Handle rigging, scaffolding, welding, and more as needed., • Tool & Equipment Management: Identify and maintain the tools and equipment needed for operations. Suggest improvements for safety and efficiency., • Valve Repair & Maintenance: Disassemble, clean, and repair valves, documenting the entire process with photos and detailed reports. Perform cause analysis and determine the best repair approach., • Safety & Organization: Maintain a clean, organized work environment, following 5S principles and safety regulations., • Documentation: Accurately complete all required reports, from work orders to safety checks, in real time.What We’re Looking For:, • Experience: Mechanical-related degree or equivalent hands-on experience with a strong mechanical aptitude., • Travel: Ability to frequently travel to client sites including up to 50% overnight travel, • Flexibility: Ability to work off-hours, weekends, and overtime when needed., • Team Player: Collaborative, positive attitude and strong communication skills., • Tech-Savvy: Comfortable with Microsoft 365 and other business applications., • Physical Stamina: Ability to lift up to 50 lbs, operate warehouse equipment, and work in physically demanding conditions.Why You'll Love Working Here:, • Impact: Play a key role in delivering high-quality service to clients., • Growth: Opportunities to expand your skills and advance in a growing company., • Supportive Team: A collaborative environment that values your input. Must be currently authorized to work in the United States. Policy on Third-Party Unsolicited Resume Submissions: Please note that any third-party unsolicited resume submissions will immediately become the property of NECI. NECI will not pay any fee to a submitting employment agency, person, or entity unless a signed agreement is established. Please Note: NECI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status or any other characteristic protected by law.