Welding jobs in Knoxville, TennesseeCreate job alerts

Job Description Welder Shifts: 1st, 2nd and weekends Pay: $17.00 - $22.00 / hour; depending on experience Location: Knoxville Job Summary Accurately weld hydraulic cylinders and all attachments described in drawings. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hand to finger, handle, or feel objects, tools, or controls and climb or balance. The employee is occasionally required to walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. This position is performed in a Manufacturing environment. The employee will work around moving mechanical equipment; may be exposed to fumes and airborne particles. Indoor Warehouse temperatures may be affected by outdoor conditions. Noise level is moderate to loud. Responsibilities and Duties of a Welder: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Uses MIG welding techniques to join base plates, cross tubes, port blocks and rod ends to cylinder tubes and rods, • Weld’s attachments and components parts to cylinders as specified by drawings, • Follows safety and security policies and procedures, • Reports any unsafe or potentially unsafe conditions to the appropriate individual, • Maintain clean work environment, • Adhere to Six “S” standards and procedures, • Completes task and/or projects as assigned Key Competencies: The requirements listed below are representative of the knowledge, skills, and/or abilities required for this position. • Ability to read engineering drawings, calipers and a measuring tape, • Ability to interpret instructions and respond to management’s direction, • Must be able to read and interpret written information, • Must be able to communicate (verbal and written) clearly with co-workers, • Ability to apply basic mathematical principles such as addition, subtraction, multiplication and fractions, • Demonstrates a sense of urgency and attention to detail Experience Requirements of a Welder: • High school diploma or GED and 1-3 years MIG welding experience and/or training or;, • Equivalent combination of education and experience required, • Experience in a production environment preferred Benefits of working with PrideStaff a Welder: • Medical, Rx, and Wellness Benefits, • Dental and Vision Plan Options, • Short-term Disability, • 401(k) Retirement Plan Join Us! PrideStaff wants you to Succeed! We have dedicated consultants that provide employment market insights and resources! We offer the support you need along the way. Over the years, we have helped tens of thousands of people find outstanding career growth opportunities. At PrideStaff, we truly value people, and we are dedicated to getting to know you and advocating on your behalf with our network of employers from across the country. Our Recruiters will help guide you with career tools and resources. Company DescriptionPrideStaff wants you to Succeed! We have dedicated consultants that provide employment market insights and resources! We offer the support you need along the way. Over the years, we have helped tens of thousands of people find outstanding career growth opportunities. At PrideStaff, we truly value people, and we are dedicated to getting to know you and advocating on your behalf with our network of employers from across the country. Our Recruiters will help guide you with career tools and resources.PrideStaff wants you to Succeed! We have dedicated consultants that provide employment market insights and resources! We offer the support you need along the way. Over the years, we have helped tens of thousands of people find outstanding career growth opportunities. At PrideStaff, we truly value people, and we are dedicated to getting to know you and advocating on your behalf with our network of employers from across the country. Our Recruiters will help guide you with career tools and resources.

Job Description Overview We’re looking for highly skilled, precision-oriented welders to join a specialized contract team working on complex fabrication projects in a clean, high-spec manufacturing environment. This is a 12-week contract role (W2) with strong potential for full-time hire based on performance, reliability, and craftsmanship. You’ll be part of a tight-knit, quality-driven production team supporting a range of high-purity process systems, pressure vessels, and stainless piping assemblies. From TIG welding on sanitary-grade stainless to heavy MIG fabrication and orbital welds on pipe spools, your work will directly contribute to systems used in critical industrial, medical, and commercial applications around the world. This is a great fit for welders who take pride in doing it right the first time, thrive in structured environments, and want to be part of a team that values safety, skill, and attention to detail. All candidates will complete a hands-on weld test prior to start. Pay & Benefits • Full-Time, • $32 - $40 /hr, • 12 week contract, • W2 employee with full benefits from day 1, • Monday - Thursday, • 6:00am - 4:30pm, • Perform advanced welding and fabrication using MIG, TIG, combination, and orbital techniques on carbon steel, stainless steel, and other specialty metals, • Interpret and work from blueprints, weldment drawings, and isometric piping diagrams, • Assemble and fit components and subassemblies with precision and consistency, • Operate weld equipment and hand tools with a focus on quality and repeatability, • Perform clean, code-compliant welds on both structural and sanitary applications, • Move, rig, and position materials using cranes, forklifts, and material carts as needed, • Maintain a clean and organized workstation with a focus on safety and efficiency, • Support manufacturing goals by meeting production timelines and quality standards, • Assist in mentoring entry-level welders and contribute to a team-oriented work environment, • Participate in continuous improvement efforts related to safety, process, and throughput, • 3+ years of experience in MIG, TIG, combination, and orbital welding in a manufacturing or industrial environment, • Proficiency welding stainless steel and carbon steel with minimal supervision, • Strong blueprint reading and weld symbol interpretation skills, • Comfortable with precision fabrication for tanks, skids, piping systems, and pressure vessels, • Able to pass a hands-on weld test for MIG, TIG, and orbital welding prior to assignment, • Skilled in use of grinders, torches, saws, and other shop tools, • Familiar with rigging, overhead crane operation, and material handling protocols, • Excellent attention to detail, consistency, and quality, • High school diploma or GED required; technical certifications or combination welder diploma preferred, • U.S. Citizenship required, • Willing to work overtime when required, including some Fridays

Job Description Travel Welder/Fabricator Position Job Title: Structural Welder/Fitter $45 & $140 in per diem. This position is located in Newport News, Virginia paying $45 and $140 in per diem Job Description We are seeking an experienced Advanced Shipfitter with a minimum of four years of commercial or naval experience as a first-class Shipfitter The ideal candidate will have extensive skills in single pass tack welding, burning, heating, and the ability to read and comprehend complex structural assembly drawings, blueprints, and sketches. Responsibilities • Perform multi-pass tack welding using the Shielded Metal Arc Welding (SMAW) process., • Operate burning and heating equipment, specifically oxygen/propane burning torches., • Interpret complex structural assembly drawings, blueprints, and sketches, including weld symbols, material types, datum, and reference lines., • Comprehend fractional dimensions using a ruler and lay off piece parts for fabrication and assembly., • Assemble structural piece parts according to specifications with high-quality standards., • Work effectively in physically demanding environments such as shipbuilding or steel fabrication., • Ensure compliance with OSHA regulations relevant to the shipbuilding industry. Essential Skills • Single & Multi Pass Tack Welding, • Burning using Oxygen/Propane Burning Torch, • Heating using Oxygen/Propane Heating Torch, • Ability to read and interpret complex structural assembly drawings, blueprints, and sketches, • Ability to comprehend fractional dimensions using a ruler All Shipfitters will be required to pass a Single Pass Tack Welder Qualification Test upon reporting for the first day of work. This test will be: A. Using the Shielded Metal Arc Welding (SMAW) Process. B. With MIL-10718-M (A-5A) Filler Metal of MIL-E-22200/1. C. In both the Vertical Up (3F) and Overhead (4F) positions. The Welding School will administer the following tests: A. Multiple Pass Tack Weld consisting of: • One (1) hour practice, • One (1) hour Vertical test The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Knoxville,TN. Application Deadline This position is anticipated to close on Oct 9, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description The Welder, Level I at Aqua-Chem is responsible for welding/assembling components and subassemblies in accordance with company standards. Working primarily in a manufacturing setting, successful candidate will work under the direction of a Manufacturing Supervisor. Schedule: (1st Shift) Monday - Thursday, 6:00am - 4:30pm (OT may be required on Friday's 6:00am - 2:30pm) Location: Onsite; Knoxville, TN Pay Range: $20.00 - $24.00/hr, Dependent on Experience Benefits: Group Medical, Dental Vision, 401(k) Match, Paid Vacation, Paid Holidays, and Paid Sick Time. +Employer Paid Benefits: STD, LTD, Life AD&D Essential Duties: • Operate manufacturing equipment safely and efficiently, • Maintain good housekeeping and clean work areas in assigned space, • Comprehend and follow ISO procedures to ensure compliance with standard, • Move materials and/or finished products to facilitate proper flow, • Demonstrate ability to meet production standards on specific assignments within required time., • Perform rigging, lifting, and moving of product using cranes, forklifts, metal carts etc., • Participate in Continuous Improvement program, • Ability to read basic weldment drawings under the supervision of a more experienced welder, • High School Diploma or GED, • Minimum of (1) one year welding in a manufacturing and/or similar environment and/or Combination Welder Diploma, • Must be a U.S. Citizen, • Must be able to work up to 12 hours standing and walking on cement surfaces and will be required to regularly bend, stretch, stoop, squat, climb ladders, and climb stairs, • Must be able to work in temperature ranges corresponding to the outside ambient temperatures, • Basic shop math and measurement skills, • Basic reading and interpretation of blueprints/drawings **Aqua-Chem provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: Bailey is searching for an experienced Dock & Door Technician to join our team based out of our branch in Knoxville, TN. Bailey is expanding its well-established operations with a dedicated team focused on the installations and service of Docks and Doors. This position is key to the continued growth and success of this exciting area. This is a high-impact position and will be a growth opportunity for the right candidate. The Dock & Door Service Technician is responsible for installation, service, repair, troubleshooting, and inspecting commercial/industrial overhead doors, loading docks, dock leveling systems, and other warehouse equipment. Essential Job Duties and Responsibilities: • Represent Bailey as the primary point of contact for all commercial Dock & Door customers within a service area., • Install, service, and repair commercial/industrial doors, door opening systems, loading/warehouse docks, and dock leveling systems., • Perform preventative maintenance on Bailey equipment and systems at customer sites., • Troubleshoot dock and door equipment, mechanisms, mechanical systems, and electrical circuits., • Ensure quality through checking for proper installation, balance, and clearance., • Proactively address customer needs and expand Bailey business through prompt, friendly, and safe service., • Competitive pay, • Comprehensive benefits, • Multiple health plans including one plan with 100% employer paid premiums, • Generous 401K matching, • 100% Employer paid short and long term disability, • Industry-leading time off plan with new employees earning 3 weeks of PTO per year and eligible for up to 5 additional sick days, • A family owned and operated business that prioritizes the needs of our employees and customers Education/Training/Experience: • A technical school certificate or equivalent experience in mechanical repairs, • A minimum of two (2) years experience in industrial maintenance, preferably with servicing warehouse equipment, commercial overhead doors, and/or loading dock equipment., • Strong mechanical skills, • Great communication skills, • Good, safe work habits, • Strong diagnostic and repair skills, • Steel toed, non-slip, work boots, • Leather gloves, rubber gloves, • Safety glasses, • Hearing protection, • Safety vest

Job Description Join Our Team at voestalpine Railway Systems Nortrak! Embark on a rewarding career journey with voestalpine Railway Systems Nortrak, North America's premier designer and manufacturer of special trackwork. With a legacy spanning 160 years, we lead the industry in shaping the future of rail solutions. As part of the voestalpine Railway Systems global network, we are committed to delivering quality products and services, including rails, turnouts, fastening systems, signaling technologies, and monitoring solutions. Operating with a presence across Canada, the US, and Mexico, we prioritize the well-being of our people, global mobility, and sustainability and innovation. Our people are the foundation of our success. Skilled, motivated, and results-driven individuals shape our culture demonstrating our core values of Respect, Responsibility, Curiosity, Courage, Passion, and Diversity each day. This commitment is more than shared values; it extends to shared responsibilities for safety and quality, showing genuine care for one another's growth and development, a commitment to our customers, and fostering strong relationships within the Nortrak Team and with our customers. We are currently looking for a Fabricator / Frog Fitter to join our team in Knoxville, Tennessee. PURPOSE OF POSITION The Fabricator / Frog Fitter is responsible to assemble and fit frogs according to the blueprint and specifications. Task and Responsibilities: • Able to operate grinder, welder and power tools., • Able to finish grind, weld, and fit., • Able to grind filler blocks, fit standard and mag-tip switch points and other miscellaneous track-work related products such as switch clip assemblies., • Assemble frogs in a timely manner., • Read and follow the production schedule., • Safely operate jib and overhead cranes., • Routine clean up work area., • Able to work with little supervision., • Adhere to Nortrak’s Safety, Quality and Environmental Procedures, Practices and Policies., • High School graduate or GED preferred., • Welding, Forklift and Crane certification preferred., • Ability to read work orders, ITP’s, blue prints, rulers and tape measures., • Frequent standing, walking, stooping, kneeling, crouching, climbing, and pushing, pulling, or lifting objects for the duration of your required schedule shift., • Use hands and arms to operate tools, handle materials, and reach for the duration of your required scheduled shift., • Regularly lift and carry 30–35 pounds; occasionally lift up to 50 pounds., • Required vision abilities include close, distance, color, peripheral vision, depth perception, and focus adjustment., • A supportive, family oriented Nortrak Blue culture, • We provide an environment where Health and Safety is our #1 priority, • Career development opportunities and competitive pay progression, • Competitive medical, dental & vision benefits, • Company paid life and disability insurance, • Paid holidays and vacation, • Retirement plan with matching contributions, • Tuition Assistance Program, • Wellness Program, • Employee Assistance Program, • Employee Recognition Programs If you think you have the necessary qualifications and drive to excel in our team, we invite you to apply now and join us at voestalpine Railway Systems Nortrak. Apply today! voestalpine Railway Systems Nortrak (“Nortrak”) is a subsidiary of voestalpine AG () one of Europe’s premier steel producers with over 50,000 employees worldwide. Nortrak is closely affiliated with voestalpine’s Railway Systems group which operates in 21 countries across the globe to provide cutting edge system-based solutions to railroads and transits. Our website is voestalpine Railway Systems Nortrak is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected Veteran status, and any other federal, state, or locally protected classifications. #wearehiring #grinding #welding #assmebling #production #blueprints #voestalpine #railwaysystems INDHP

Job DescriptionDescription: *A sign-on bonus is available! SUMMARY The Maintenance Technician II performs skilled work in the maintenance and repair of apartment buildings and building fixtures. The incumbent works as a member of a maintenance crew and performs a variety of skilled tasks in several mechanical and building trades. All activities must support Knoxville’s Community Development Corporation (“KCDC” or “Authority”) mission, strategic goals, and objectives. SUPERVISORY RESPONSIBILITIES The Maintenance Technician II is a non-supervisory job classification. ESSENTIAL DUTIES AND RESPONSIBILITIES The position duties and responsibilities listed below describe the general nature and scope of work. Other responsibilities, duties, and skills may be required and assigned, as needed. • Removes, installs and repairs cabinets and counter tops., • Installs and repairs baseboards, molding, and trim., • Repairs damaged walls, ceilings, and stairs., • Removes and replaces damaged flooring and tile., • Repairs and adjusts windows and doors., • Removes, installs, and repairs door locks., • Installs and repairs door and window screens., • Repairs bookcases, bulletin boards, tables, office furniture, and other wood fixtures., • Paints over repaired areas as needed; replaces damaged roofing shingles., • Repairs and/or replaces dishwashers., • Installs electrical conduit and wiring; makes connections to switch boxes; repairs and/or replaces electrical base plugs and switches; replaces circuit breakers; removes, installs, and repairs lighting fixtures; tests, locates, and repairs strain in electrical circuits, equipment, and appliances; repairs electric ranges, refrigerators and heaters., • Removes, installs, and repairs a variety of plumbing fixtures such as sinks, commodes, water closets, bath tubs, showers, and faucets; replaces defective fittings, valves, traps, washers, and gaskets; locates and repairs leaks in water lines; cuts, reams, glues, and solders plastic and copper pipes and fittings; opens clogged drains, traps and fixtures; installs, removes and repairs water heaters., • Repairs and maintains masonry structures; removes damaged stones, bricks, and blocks; mixes mortar and lays bricks and blocks; repairs concrete walks, driveways, and porches., • Repairs metal fixtures; performs burning and welding tasks., • Inspects and replaces fire extinguishers., • Cleans, repairs, and replaces gutters and downspouts., • Maintains stock of all items used in work., • Sprays and treats apartments to control ants, fleas, roaches and other pests., • Assists in the maintenance of grounds around housing developments., • Assists and trains employees in operations and repairs pertaining to listed duties., • Installs, replaces, repairs, and makes keys for core lock system., • Performs minor repairs on HVAC units., • Attends training sessions., • Performs other duties as assigned. Requirements: KNOWLEDGE, SKILLS, AND ABILITIES • Knowledge of the standard practices, methods, tools, equipment, and materials used in the mechanical and building craft trades., • Knowledge of the hazards and safety precautions of the mechanical and building trades., • Skill in the use of tools, equipment, and materials pertinent to the mechanical and building craft trades., • Proficient in the use of Outlook and electronic work order systems., • Ability to follow oral and written instructions, and to communicate effectively both orally and in writing., • Ability to establish and maintain effective working relationships with superiors, fellow employees, and residents. CERTIFICATES, LICENSES, AND REGISTRATIONS Requires a valid driver’s license and the ability to be insurable under the Authority’s automobile insurance plan at the standard rate.

Job Description At Kelvion, our mission is to lead the industrial transformation by championing innovation and sustainability. From optimizing data centers and advancing hydrogen production to revolutionizing refrigeration and HVAC systems, our mission-critical thermal solutions empower industries around the globe. United as “One Kelvion,” our global team delivers innovative solutions that drive customer success and support a sustainable future. Kelvion – Together, We Shape the Future The Role Perform activities concerned with maintenance of equipment and machinery in industrial plant by performing the following duties. What you will be responsible for: • Ability to repair and maintain overhead bridge cranes Jib Cranes and other types of machinery require diagnosing and making solid recommendations to repair all equipment as needed. Must have knowledge in repairing, motors, pneumatic tools, conveyor systems., • Observe mechanical devices in operation and listens to the sounds to locate cause of trouble., • Perform monthly inspections on all production equipment and replacement parts; Confer with department managers to coordinate monthly inspections, • Examine form and texture of parts to detect imperfections; repair or replace defective parts; install special functional and structural parts in devices., • Lubricate and clean parts. Start devices to test their performance., • Operate overhead and jib cranes, operate industrial forklifts and man lifts., • Visually inspects and tests machinery and equipment., • Listen for unusual sounds from machines or equipment to detect malfunction and discuss machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Ability to dismantle defective machines and equipment and installs new or repaired parts., • Ability to install and repair electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment., • Layout, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment., • Ability to repair and maintain physical structure of establishment., • Install, program, or repair automated machinery and equipment such as robots or programmable controllers., • Operate cutting torch or welding equipment to cut or join metal parts., • Fabricate and repair counters, benches, partitions, and other wooden structures., • Regular attendance, ability to arrive at work punctually, ability to work on–site, ability to work overtime., • Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management., • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret electrical drawings and schematic drawing for pneumatic and hydraulic systems., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. High school diploma or general education degree (GED) preferred; and minimum of 3 years of experience in industrial maintenance. What we offer YOU: At Kelvion, we take your well-being seriously. Our comprehensive benefits package includes options for medical, dental, vision, life insurance, short-term and long-term disability insurance, Paid Time Off, and holidays. We also help you plan for retirement by offering a 401(k) Retirement Savings Plan with a company match. At Kelvion we thrive on collaboration, embracing diversity of thought, and valuing every voice. Within Kelvion creativity shines because people are listened too, their contributions recognized, and their ideas welcomed. Our flexible approach to the way we work, places people’s health and satisfaction as a priority, enhancing engagement and fostering career opportunities. We empower engaged individuals to grow, progress and carve their own paths within the company. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. If you need assistance with this application or a reasonable accommodation due to a disability, you may contact us at . This email address is reserved for individuals with disabilities in need of assistance and is not a means of inquiry regarding positions or application status. We are unable to sponsor or take over sponsorship of an employment visa for this role at any time.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Knoxville, TN. These are mainly first shift opportunities with a pay range of $25-30/hour dependent on experience & skill level. If you are a Maintenance Technician and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope (can include any or all of the following): • Perform Preventative & Corrective Maintenance on Machinery & Equipment, • Maintain Equipment & Facility to Ensure Maximum Reliability, • Electrical, Hydraulic & Pneumatic Maintenance, • Troubleshoot, Diagnose and Develop Solutions for Issues with Equipment, • Tech Maintenance, • Work on Business Unit Facilities, Equipment, Tooling, etc., • Repair work, • Some Welding, • General Building Maintenance, HVAC & Plumbing Repairs, • Able to Read and Understand Blueprints & Schematics, • Tools of the Trade, • Proper PPE must be worn, • Safety Oriented, • Prior Construction Experience Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Job Title: Multi-Craft Industrial Maintenance Technician Location: Knoxville, TN. Some relocation assistance may be available. Shift: All shifts Compensation: $26 - $30/hr + benefits. Job Summary: We’re a nationwide food manufacturer looking for a skilled Multi-Craft Maintenance Technician to join our team. In this role, you’ll install, maintain, and repair a wide range of equipment—from conveyors and packaging machines to pumps and electrical systems. If you’re a hands-on problem solver with a background in industrial maintenance, we’d love to hear from you. Job Requirements: • 2-year technical degree in Electrical/Mechanical repair and 4+ years of multi-craft industrial maintenance experience — or 7 years relevant experience, • Experience with high-speed food or pharmaceutical packaging equipment preferred, • Strong mechanical, electrical, hydraulic, and pneumatic troubleshooting skills, • Proficiency with PLCs, welding (TIG, Stick), and power/precision tools, • Able to work in demanding environments (noise, heat, cold, heights) and perform physically active tasks, • Comfortable using forklifts, lifts, and reading technical manuals/blueprints

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Knoxville, TN. Most positions are first shift with a pay scale of $25-30/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Air Arc, • Repair Welding, • Pipe & Mechanical, • Basic Tools for the Trade, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Knoxville company is seeking an Automotive Body Shop Technician Technician! Pay: $21.00-$23.00/hr Depending on experience Benefits: Medical, Dental, Vision APPLY NOW! Responsibilities • Examine damaged vehicles and diagnose repair procedure, • Remove upholstery, accessories, electrical and hydraulic window-and-seat-operating equipment, and trim to gain access to vehicle body and fenders, • Fill depressions with body filler, • Remove damaged fenders and panels, • Bolt or weld replacement parts in position, using wrenches or welding equipment, • File, grind and sand repaired surfaces, • Metal finish & prep repaired surface Experience: • 1 year of experience as an Auto Body Technician required, • Working knowledge of all aspects of repairs for damaged body parts and bodies of vehicles, • Must be detail orientedCompany DescriptionPrideStaff wants you to Succeed! We have dedicated consultants that provide employment market insights and resources! We offer the support you need along the way. Over the years, we have helped tens of thousands of people find outstanding career growth opportunities. At PrideStaff, we truly value people, and we are dedicated to getting to know you and advocating on your behalf with our network of employers from across the country. Our Recruiters will help guide you with career tools and resources.PrideStaff wants you to Succeed! We have dedicated consultants that provide employment market insights and resources! We offer the support you need along the way. Over the years, we have helped tens of thousands of people find outstanding career growth opportunities. At PrideStaff, we truly value people, and we are dedicated to getting to know you and advocating on your behalf with our network of employers from across the country. Our Recruiters will help guide you with career tools and resources.

Job Description POSITION SUMMARY This design engineering position will be primarily responsible for the design process for the RT and Datacenter product lines. The primary focus will be utilizing 3D CAD systems to generate solid models, 3D assemblies, and 2D drawings to meet customer, vendor, and in-house specifications. Additionally, team members will be asked to assist other departments on an as needed basis. RESPONSIBILITIES & DUTIES • Generates 3D component parts and assemblies of proposed designs using computer aided drafting/design software (Autodesk Inventor), • Verifies material to be used and relation of one part to another as well as to the whole structure or project, • Creates and revises production drawings (component parts and assembly drawings) that include detailed multi-views with all necessary dimensions and notes, • Maintains drafting standards utilizing appropriate company guidelines and suggests improvements as needed, • Utilizes knowledge of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to complete detailed designs and drawings, • Assists with the design and building of prototype parts or systems, • Assists production with assembly and troubleshooting as needed, • Maintains an enterprise resource planning system including the item master and production Bills of Materials, • Creates work instructions to assist production as well as streamlining design department processes, • Ability to work with production staff and other engineers to solve problems, • Communicates with Manufacturing, Purchasing, Quality, and/or Vendors regarding new and revised designs or drawings, • Seeks out action items to improve the design process, • Follows priorities and check with manager for other instructions, • To ensure Kelvion’s Standard of Excellence, which includes quality, is incorporated into every product we produce., • To ensure Kelvion’s Standard of Excellence, which includes quality, is incorporated into every product we produce., • Self-motivated, reliable, and team oriented, • Good analytical problem-solving skills, • Exhibit good interpersonal skills, technical skills, and communication skills, • Show attention to detail, • High skill level in Autodesk Inventor or equivalent program, • Familiar with brazing and/or welding practices and callouts, • Experience with CNC and/or PLC systems, • Experience with/ability to learn enterprise resource planning systems, • Bachelor’s degree in mechanical engineering, design engineering, or relevant field, • Experience in Lean manufacturing environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel; and reach with hands, arms, and shoulders. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl; and talk and hear. The employee must regularly hand lift and/or move objects up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionSprinkler Fitter Welder - $20 to $25 per hour - Knoxville, TN Area Do you have a passion for fire protection systems? Join our team as a Sprinkler Fitter and play a crucial role in ensuring the safety of buildings and occupants. We offer competitive compensation ranging from $20 to $25 per hour, depending on your experience and expertise. Job Description: As a Sprinkler Fitter, you will specialize in the installation, maintenance, and repair of fire sprinkler systems. Your responsibilities will include: System Installation: Collaborate with a team to install fire sprinkler systems in various types of buildings, including commercial and residential properties. System Maintenance: Perform routine inspections and maintenance to ensure the reliability and functionality of fire sprinkler systems. Repairs: Identify and repair any issues or malfunctions in existing systems, including leakages or damaged components. Blueprint Interpretation: Read and interpret blueprints and technical drawings to guide the installation and maintenance processes. Safety Compliance: Adhere to all safety guidelines and regulations to ensure a secure working environment and proper system operation. Documentation: Maintain accurate records of work performed, inspections, and any necessary repairs. Requirements: Sprinkler Fitter Experience: Prior experience as a sprinkler fitter or in a similar role is highly valued. Technical Knowledge: Familiarity with fire protection systems and the ability to read and understand technical drawings. Safety Awareness: A strong commitment to safety practices and protocols. Certifications: Relevant certifications, such as welding certifications or sprinkler fitting licenses, are advantageous. Benefits: Competitive Pay: Earn between $20 and $25 per hour based on your skills and experience. Fire Protection Industry: Join a specialized field dedicated to safeguarding lives and property from fire hazards. Professional Growth: Expand your expertise and advance your career in the fire protection industry. Safety First: Work in an environment that prioritizes safety and compliance with industry standards. If you are experienced with a passion for ensuring the safety of others and are ready to contribute to the vital field of fire protection, apply today for the Sprinkler Fitter position. Your skills will make a meaningful impact on the safety of buildings and communities in the Knoxville, TN area. If Interested, please call 865-444-3116!

Job Description Overview Tradesmen International is immediately hiring experienced Journeyman Millwrights for projects located in the Knoxville, TN area. This is a first shift opportunity, and the pay rate is up to $28/hour based on experience and skill level. If you are a Millwright and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Assemble, align & dismantle industrial machinery and equipment, • Read blueprints, and schematics, • Perform preventative maintenance, • Troubleshoot, and repair mechanical systems, • Use hand tools, power tools, welding equipment, and precision measuring instruments Responsibilities • Prior experience Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job DescriptionDescription:JOB SUMMARY The Tooling/EDM/CNC Operator, under the supervision of the Tooling Manager, will interpret design schematics, cut and shape dies, and assemble the completed parts. Will also need to test the performance of the completed product. As a EDM - CNC Programmer will set up and operate a variety of machine tools to produce precision parts and instruments. Fabricate, modify or repair mechanical instruments by applying knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures. Requirements:DUTIES AND RESPONSIBILITIES • Reading and interpreting blueprints, design schematics, and CAD drawings., • Visualizing and computing metal shapes and tolerances., • Designing jigs and templates as work aids in the fabrication of parts., • Measuring and marking metal stock for machining., • Setting up machine tools such as drills, lathes, grinders, and milling machines., • Cutting and shaping blocks to specified dimensions., • Filling, grinding, and shimming metals to ensure a smooth finish., • Fitting and assembling tools and die parts., • Inspecting finished dies and tools for defects, smoothness, and contour deformities., • Conducting test runs with completed tools and dies., • Program, set up and operate wire EDM machines and CNC machines., • Completes maintenance and production projects as required., • Perform preventative maintenance on lathes, grinders, mills, CNC and EDM on a regular basis., • Maintain a clean work area and practice good housekeeping on a regular basis. · Actively participates in correcting and communicating safety hazards. · Perform all other duties as assigned. SKILLS · Ability to read and interpret blueprints, drawings, and plans (mechanical and/or electrical). · Superior interpersonal and communication to work with co-workers. · Strong analytical and problem-solving skills. · Ability to prioritize tasks and to delegate them when appropriate. EDUCATION/EXPERIENCE REQUIREMENTS · High School Diploma or GED · 1-2 years of machining and manual milling experience · Specialized training in welding, machining and fabrication a plus. · Knowledge of DP Esprit and MasterCam software preferred PHYSICAL REQUIREMENTS · Able to endure working in a manufacturing environment with inside excessive hot and cold temperatures, able to tolerate exposure to dust and noise. · Prolonged sitting and/or standing on concrete floors; Frequent walking; Occasional climb ladders, work in confined spaces. · Frequent reaching; Repetitive use of wrist, hands and fingers.

Job Description Every employee with Reeder Chevrolet is absolutely critical to its success. Reeder Chevrolet has been a family-owned and operated business since 1912. We were the #1 volume dealer in Tennessee in 2017 and received the Mark of Excellence award. Our rapid growth and fast-paced environment make this an awesome place to work. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. Come join our team! What We Offer: * Medical Insurance * Dental Insurance * 401K * Paid Vacation Responsibilities: * Identify and resolve parts required for repair; review repair orders, work order, and Body Shop Managers estimate notes; follow warranty guidelines; notify supervisor of any repair add-ons. * Adjust, replace, and repair all series of cars and light trucks (e.g., sheet metal repairs, fiberglass/ panel repairs, fabrication and structural welding, electrical and mechanical repairs, etc.). * Road test vehicles when necessary to ensure quality repair. * Maintain current knowledge of job and technical skills including truck manufacturer’s repair process. * Perform work as outlined on repair estimates with efficiency and accuracy in accordance with dealership and factory standards. * Teardown and inspect for additional or hidden repairs. * Advise body shop estimator of additional damage or supplemental needs or if repairs will not be completed on time. * Lead work of any apprentice technicians and maintain ASE certifications. Qualifications: * Welding, suspension, framework experience a plus OR willing to learn/train * ASE Certifications; Damage Analysis and Estimating, Mechanical and Electrical Components, Non-Structural Analysis and Damage Repair and State Vehicle Inspector (preferred) * Certifications listed above or equivalent experience and eagerness to improve * Valid driver's license and clean driving record We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Every employee with Reeder Chevrolet is absolutely critical to its success. Reeder Chevrolet has been a family-owned and operated business since 1912. We were the #1 volume dealer in Tennessee in 2017 and received the Mark of Excellence award. Our rapid growth and fast-paced environment make this an awesome place to work. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. Come join our team! What We Offer: * Paid Training * Medical, Dental, & Vision Insurance * Paid Holidays * Paid Vacation * 401k with Company Match * Life Insurance * Short Term Disability Responsibilities: * Diagnosing and repairing equipment problems relating to mechanical, electrical. * Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment * Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition * Raise trucks, buses, and heavy parts or equipment using hydraulic jacks or hoists. * Specialize in repairing and troubleshooting of major components such as engine, transmissions and differentials, to include replacing complete assemblies, turbochargers, fuel system components etc. * Communicate directly with manager so customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs * Executing repairs under warranty to manufacturer specifications Requirements: * Minimum of High School Diploma or equivalent * Experience repairing and maintaining equipment or be a trade school graduate * Automotive experience preferred, but not required * Basic welding skills preferred * Strong teamwork skills * Must be physically able to lift 50 lbs and able to bend, squat, crouch, reach as job requires * Willing to submit to a drug screen & background check * Must have clean & valid driver's license

Job DescriptionPosition: Fabrication Welder Location: Knoxville TN Pay: $20-25 per hour (Depending on Experience) Job Description: Are you a skilled welder looking for an exciting opportunity in fabrication? Join our team as a Fabrication Welder and showcase your expertise in Stick, Mig, and Tig welding techniques. We are seeking proficient welders who are dedicated to producing high-quality workmanship. The job's specifics are contingent on successfully passing a weld test, ensuring that our team members possess the necessary skills to excel in this role. Responsibilities: Perform Stick, Mig, and Tig welding operations according to project specifications. Interpret blueprints, drawings, and welding symbols to complete fabrication tasks accurately. Set up and operate welding equipment safely and efficiently. Conduct weld tests to ensure compliance with quality standards and specifications. Inspect welds for defects and make necessary adjustments to maintain quality. Maintain a clean and organized work area to ensure safety and efficiency. Collaborate with team members and supervisors to meet project deadlines and goals. Qualifications: Proficiency in Stick, Mig, and Tig welding techniques. Experience in fabrication and welding in a manufacturing or similar environment. Ability to interpret blueprints, drawings, and welding symbols. Own a welding hood and basic welding tools. Strong attention to detail and commitment to producing high-quality work. Ability to pass a weld test as part of the job application process. Benefits: Competitive hourly wage ranging from $20 to $25, depending on experience. Opportunity for overtime hours as needed. Potential for career growth and advancement within the company. Positive work environment with supportive team members. Comprehensive training and development opportunities. If you're a skilled welder with expertise in Stick, Mig, and Tig welding and are ready to take on new challenges in fabrication, apply now for the Fabrication Welder position. Join our team and become part of a dynamic and growing organization committed to excellence in welding and fabrication.

Job DescriptionDescription: The electro/mechanical technician, under the supervision of the Maintenance Manager, will perform general mechanical and industrial electrical maintenance work on all production and grounds equipment of a plastics extrusion manufacturing plant. Performs duties such as preventative, troubleshooting, rebuilds and general repairs. Works with pumps, hydraulics, electrical control systems, conveyors, and pneumatics. Also performs machine installation, construction, and facility maintenance. DUTIES AND RESPONSIBILITIES • Performs basic mechanical and electrical maintenance repairs., • Completes preventative maintenance as scheduled to drive down performance losses and increase equipment reliability., • Maintains and services specific equipment such as HVAC, compressors, facilities equipment, powered industrial vehicles., • Troubleshoots electrical and mechanical problems on all equipment such as extruders, conveyors, packaging equipment, etc., • Sets up equipment for product changeovers, start-ups and monitor cleaning for the prevention of damage due to improper use., • Performs basic computer functions such as: work orders data entry, look up of inventory stock locations, logging downtime comments and minutes., • Properly use mechanical and electrical tools and diagnostic instruments., • Responds to all emergency line calls quickly and cooperatively., • Maintains a clean work area and practices good housekeeping on a regular basis. · Superior interpersonal and communication to work with co-workers. · Highly organized with exceptional problem-solving skills. · Ability to perform all tasks with confidence, precision and strong attention to detail and safety. EDUCATION/EXPERIENCE REQUIREMENTS · High School or equivalent, with specialized courses in electronics and/or mechanics. · 2-3 years of experience in troubleshooting electronic and mechanical components. · Solid knowledge of industrial mechanics principles including hydraulics, pneumatics, electric motors, and controls. Specialized training in welding, machining and fabrication a plus. PHYSICAL REQUIREMENTS · Able to endure working in a manufacturing environment with inside excessive hot and cold temperatures, able to tolerate exposure to dust and noise for 12-hour shifts. · Prolonged sitting and/or standing on concrete floors; Frequent walking; Occasional climb ladders, work in confined spaces. · Frequent reaching; Repetitive use of wrist, hands and fingers.

Job Description Overview As a Facilities Welder, you’ll play a vital role in building and maintaining the structures, exhibits, and infrastructure that welcome and inspire tens of thousands of visitors each year. From secure enclosures and custom platforms to decorative railing and event staging, your craftsmanship directly shapes the experience of a beloved, one-of-a-kind Knoxville destination. This is a highly skilled, hands-on role for someone who takes pride in their work and finds meaning in building things that last. You’ll weld, fabricate, and repair metal systems across a multi-acre campus—supporting seasonal installations, major capital projects, and everyday facility upkeep. One day you might be fabricating a new gate system for a high-traffic exhibit area, and the next reinforcing structural steel to support a special event or new attraction. You’ll work alongside a mission-driven team that values collaboration, creativity, and attention to detail—bringing vision to life in ways most people never see, but everyone experiences. Through all of your work, you’ll embody our core values of Education, Serve, Care, Integrity, Fun, and Respect—helping maintain a campus that feels safe, inviting, and extraordinary. Pay & Benefits • Full-Time, • $21 - $22 / hr, • Monday - Friday, • Weld, fabricate, and repair metal components and structural elements across public, exhibit, and support areas, • Design and construct fences, platforms, and enclosures and support infrastructure for new and existing exhibits, • Diagnose and troubleshoot facility structures, equipment, and welded assemblies, • Safely operate a wide variety of tools and equipment including MIG welders, cutting torches, grinders, hand and power tools, • Read and interpret blueprints, technical drawings, and fabrication diagrams, • Perform preventive maintenance on welded structures and support systems to reduce risk and improve longevity, • Support installation and breakdown of seasonal exhibits, special events, and guest experiences, • Coordinate with other departments to support campus-wide operations and infrastructure needs, • Maintain accurate logs for work performed, materials used, and time spent, • Assist in training and supervising volunteers or junior team members as needed, • Uphold all applicable safety codes and organization policies (OSHA, ADA, USDA, EPA, etc.), • Minimum 3 years of welding and facilities maintenance experience (commercial, industrial, or construction), • High school diploma or equivalent required; technical/trade school preferred, • Proficient in MIG welding, metal fabrication, and safe use of cutting torches and welders, • Skilled in blueprint reading, mechanical repair, and safe operation of hand and power tools, • Strong problem-solving skills; able to work independently or collaborate across departments, • Professional, organized, and customer service-oriented demeanor, • Comfortable reacting effectively in high-pressure or emergency situations, • Valid Tennessee driver’s license required (or ability to obtain)

Job Description Thompson Truck Group is a trusted name in fleet maintenance, trailer repair, and truck body services. We’re proud to serve major fleet accounts and rental providers with a commitment to quality, safety, and reliability. We're looking for a dependable Trailer Mechanic who takes pride in their work and wants to be part of a company that values traditional work ethic, craftsmanship, and team integrity. Job Summary We are seeking a skilled and motivated Trailer Mechanic to join our team. In this role, you'll be responsible for diagnosing, repairing, and maintaining a variety of commercial trailers and truck bodies, including dry vans, reefers, liftgates, and more. You’ll work alongside experienced technicians in a well-equipped shop with a consistent workload and supportive management. Responsibilities • Perform routine inspections and preventive maintenance on trailers, • Diagnose and repair trailer components including: brakes, suspension, lights, doors, flooring, landing gear, and roofs, • Repair or replace side panels, roof skins, flooring, and structural components on dry van and reefer trailers, • Diagnose and repair liftgate issues (electrical/hydraulic/mechanical), • Weld, fabricate, and complete bodywork as required, • Accurately document all repairs and parts used, • Ensure all work meets DOT and company safety standards, • Maintain a clean and organized work area, • Communicate effectively with service writers and managersQualifications, • 2+ years of trailer or truck body repair experience preferred, • Basic welding and fabrication skills (steel & aluminum), • Familiarity with air brake systems, ABS diagnostics, and liftgate systems, • Own a basic set of tools (specialty tools provided), • CDL or ability to obtain one is a plus, • High school diploma or GED, • Ability to pass a drug screening, background check, and MVR check.What We Offer, • Health Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Retirement Plan, • Life Insurance, • Paid Time Off (PTO), • Paid Holidays, • Opportunities for growth and advancement, • Company-paid training and certificationsSchedule, • Full-time, • Day shift, • Monday to Friday

Job Description Senior Industrial Controls Engineer – 10+ Years Required Location: Hendersonville, North Carolina Industry: Industrial Controls/R&D About Us Solid Rock Recruiting is partnering with a leader in industrial automation and advanced kiln systems, serving customers worldwide with innovative engineering solutions. We are seeking a Senior R&D / Industrial Engineer to drive research & development, solve complex technical challenges, and support large-scale equipment installations. This role is critical to our continued growth and requires a highly skilled, hands-on engineer who thrives in dynamic, technical environments. What You’ll Do * Lead R&D initiatives and drive innovation across mechanical, electrical, and control systems. * Serve as the go-to technical problem solver—able to diagnose and resolve issues that others can’t. * Oversee commissioning, startup, and servicing of industrial kiln equipment in the field. * Develop, program, and optimize PLCs (primarily Rockwell/Allen-Bradley, but open to others). * Work with servo systems, VFDs, networking, and advanced controls integration. * Update and maintain our proprietary software controls package. * Collaborate with plant operations, maintenance, and project teams to ensure successful installations. * Mentor junior engineers and contribute to knowledge-sharing across the team. What We’re Looking For Must-Have Qualifications: * Bachelor’s degree in Mechanical, Electrical, or related Engineering field. * 10–25 years of industrial engineering experience (automation, plant engineering, or similar). * Strong PLC programming skills (Rockwell preferred, but definitely open to others). * Broad background across mechanical and electrical systems—not siloed in one discipline. * Proven track record in industrial automation, troubleshooting, and hands-on problem solving. * Experience with project, plant, or maintenance management. * Excellent communication skills—able to work with customers and internal teams Nice-to-Haves: * Experience with kilns, furnaces, or large-scale industrial process equipment. * R&D leadership experience. * Welding practices, corrosion troubleshooting, and/or pressure vessel certifications. Additional Details * Travel expectation is ~50% (startup, commissioning, customer support). * Candidates should be willing to base themselves in or near Hendersonville, NC, to stay connected with the team and office. * Compensation is extremely competitive with flexibility for the right candidate. This is a highly selective search: we’re seeking an “A-player” engineer with deep technical expertise and leadership capability. If you’re a seasoned engineer who thrives on solving the toughest challenges, we want to talk to you. Apply today by sending your resume to or giving me a call at 605.291.1328

Job Description Job Summary: Scale Service Techs Level I work mostly on their own in the field to calibrate and / or repair customer’s industrial scales. Candidates must have strong computer skills, be in good physical condition, enjoy solving technical problems and being part of a team. Upon completion of calibration, the service tech enters data into calibration software and creates a Certificate of Calibration for the customer. They work some overtime and weekend hours. Essential Functions: * Maintenance, calibration and / or repair of Industrial Scales * Respond to Call Service (Emergency) to fix and repair Customer’s Scales – calls could be during or after working hours. Must be willing to work some overtime and weekend hours – may also include some overnight travel. * Consistently maintain good work attendance and productive work ethic. Minimum Requirements / Qualifications: * Strong mechanical, electronic and / or technical background in industrial environment * Valid driver’s license and clean driving history required * Class B CDL license a plus * Welding and/or Concrete knowledge is a plus * Strong interpersonal and customer service skills * 2 Year Technical Degree preferred but not required * Military service or calibration experience a plus * Computer literate * Performance driven and customer focused * Local travel, occasional overnights required Core Competencies: * Commitment to Excellence - Check your work * Customer Relationship Management - communicate with customers to deliver better service * Methodical Approach - troubleshooting * Team Building Physical Demands of the Position: Stands greater than four hours at a time Stoops and bends below knee level 8 – 10 times an hour Lifts and carries less than 100 pounds repetitively Climbs stairs more than four times in an eight hour shift Pushes / pulls objects greater than 25 pounds Reaches out; Reaches overhead Repetitively uses feet to walk and to drive Repetitively uses hands Grips with hands

Job DescriptionDescription: Who We Are ESPEC North America (ENA) is partner in environmental and accelerated reliability test chambers and solutions with a long history and deep expertise in making the world a better place through better quality, higher reliability products. Mission We continually aim to grow and evolve by building mutually responsive, innovative partnerships with our customers, vendors, and strategic allies, and creating opportunities for our team members. Our cornerstone is to be the most reliable and accessible supplier of testing solutions. We're adding a Field Service Technician to our team in Knoxville, TN. This role comes with a fantastic benefits package, a company van, all required tools, and all travel expenses covered. Hours: Full-time 40+ a week. This position requires extensive travel. Essential Duties and Responsibilities • Performs calibration service to all ENA and ESPEC Corp manufactured equipment while, • adhering to ISO/IEC 17025 Quality Management System and maintaining accuracy of customer, • data., • Conducts on-site training for customers on the operation, start-up, and maintenance of newly installed equipment., • Repairs and adjusts refrigeration systems, electrical, and control systems., • Configures and calibrates controllers and recorders, demonstrating knowledge in their operation and application., • Evacuates refrigeration systems as needed., • Charges/recharges refrigeration systems and fills out refrigerant usage tickets., • Reads and interprets refrigeration and electrical prints/drawings., • Coordinates and supervises on-site activities when contractors are used to help on large installations., • Records and approves contractor hours on large installations., • Completes expense reports for all expenditures., • Submits detailed service reports after each job, including travel/labor hours, work performed, job status, and customer signature., • Implements engineering-approved system changes., • Returns parts from the field., • Presents him/herself professionally and acts in a courteous and helpful manner., • Prepares for the next assignment by researching what must be done to complete the job., • Reads manuals on unfamiliar equipment to gain a better understanding., • Assists production as needed upon request, • Cleans work area, cleans and maintains service van, machines, tools, and equipment., • Arrives at the pre-determined job site on the date and time provided by the Service Manager., • Completes ongoing safety training., • Operates efficiently and effectively with minimal direct supervision., • Regular, physical attendance is required., • Regional, Extended Domestic, and International travel required., • Other duties as assigned.Requirements:, • Travel is required (all expenses paid)., • Minimum of two years college or trade school or five years of experience in the industry., • Experience brazing/soldering/welding ferrous and non-ferrous materials., • Experience with plumbing., • Customer service experience., • Electrical controls troubleshooting., • Refrigerant charging and recovery., • Valid Drivers License., • Must be able to lift 50 lbs., • Basic computer skills., • EPA Certification.

Welding Inspector must assure proper welding and radiographic procedures are qualified and utilized, radiographers are certified, welders are qualified, sound welds are produced, and proper documentation is maintained. Welding Inspector's responsibility to interpret the radiographic film; however, t

Minimum of an Associate's degree in Welding, Welding Technology, or a related field from a regionally accredited college or university, OR,. A postsecondary diploma and/or a nationally recognized certification and/or completion of a union apprenticeship with the ability to achieve an Associate's deg

Associates's degree or higher from a regionally accredited college/university in the teaching field or closely related field and three years' work experience in the Welding field.

Job Description The Mechanical Assembler II at Aqua-Chem requires an advanced level of mechanical aptitude, use of various machinery, hand tools, and power tools, to assist the manufacturing process of large-scale custom-built water purification and filtration systems, especially during final assembly. Schedule: (1st Shift) Monday - Thursday, 6:00am - 4:30pm (OT may be required on Friday's 6:00am - 2:30pm) Location: Onsite; Knoxville, TN Pay Range: $22.00 - $26.00/hr, Dependent on Experience Benefits: Group Medical, Dental Vision, 401(k) Match, Paid Vacation, Paid Holidays, and Paid Sick Time. +Employer Paid Benefits: STD, LTD, Life AD&D Essential Duties: • Perform duties such as bending metal tubing with the use of rolling and bending machines., • Ability to run a cold and cutoff saw., • Perform hands-on mechanical assembly using hand and power tools as part of a larger assembly production to build high-quality systems., • Fit, install, and secure piping, valves, pumps, motors, and other components in accordance with mechanical drawings and P&ID schematics., • Perform minor welding tasks as needed; orbital and TIG welding capabilities are a plus but not required., • Ensure the assembled systems meet internal quality standards and customer specifications., • Read and interpret technical drawings, BOMs, layout sketches, and schematics accurately., • Identify and troubleshoot mechanical issues, communicating effectively with cross-functional teams., • Maintain a clean and organized work environment following safety, 5S, and quality guidelines., • Accurately complete job documentation and time tracking using systems such as the company HRIS and/or ERP systems., • Assist in preparation of systems for final inspection and FAT., • Support process improvements and participate in team problem-solving efforts., • High School Diploma/GED required, • 2–3 years of mechanical assembly experience in a manufacturing or fabrication environment., • Proficiency in reading mechanical drawings and interpreting technical documentation., • Strong attention to detail and a proactive, team-first attitude., • Experience with job tracking, documentation, and process compliance., • Mechanical aptitude and craftsmanship, • Team collaboration and communication, • Problem-solving and initiative, • Safety and quality focus, • Time management and accountability, • Process discipline and traceability awareness, • Basic welding skills (orbital and/or TIG) are a plus, but not mandatory., • Must be a U.S. Citizen **Aqua-Chem provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Join Our Team at voestalpine Railway Systems Nortrak! Embark on a rewarding career journey with voestalpine Railway Systems Nortrak, North America's premier designer and manufacturer of special trackwork. With a legacy spanning 160 years, we lead the industry in shaping the future of rail solutions. As part of the voestalpine Railway Systems global network, we are committed to delivering quality products and services, including rails, turnouts, fastening systems, signaling technologies, and monitoring solutions. Operating with a presence across Canada, the US, and Mexico, we prioritize the well-being of our people, global mobility, and sustainability and innovation. Our people are the foundation of our success. Skilled, motivated, and results-driven individuals shape our culture demonstrating our core values of Respect, Responsibility, Curiosity, Courage, Passion, and Diversity each day. This commitment is more than shared values; it extends to shared responsibilities for safety and quality, showing genuine care for one another's growth and development, a commitment to our customers, and fostering strong relationships within the Nortrak Team and with our customers. We are currently looking for an Assembler to join our team in Knoxville, Tennessee. PURPOSE OF POSITION The Assembler is responsible for grinding, welding, fitting, and assembling all steel, iron, and manganese rail points for track work related products to the specifications provided by engineering. Task and Responsibilities: • Operate hydraulic benders or presses to straighten manganese castings., • Safely operate jib and overhead cranes., • Ability to operate grinder, welder and power tools., • Proficiently assemble all switch points built at plant., • Safely operate powered industrial truck., • Able to work with little supervision., • Adhere to Nortrak’s Safety, Quality and Environmental Procedures, Practices and Policies., • Routine cleanup of work area., • High School graduate or GED preferred., • Welding, Forklift and Crane certification preferred., • Ability to read work orders and blueprints preferred., • Experience with measuring tools preferred., • Basic mathematical calculation experience in adding and subtracting whole numbers, fractions and decimals., • Frequent standing, walking, stooping, kneeling, crouching, climbing, and pushing, pulling, or lifting objects for the duration of your required schedule shift., • Use hands and arms to operate tools, handle materials, and reach for the duration of your required scheduled shift., • Regularly lift and carry 30–35 pounds; occasionally lift up to 50 pounds., • Required vision abilities include close, distance, color, peripheral vision, depth perception, and focus adjustment., • A supportive, family oriented Nortrak Blue culture, • We provide an environment where Health and Safety is our #1 priority, • Career development opportunities and competitive pay progression, • Competitive medical, dental & vision benefits, • Company paid life and disability insurance, • Paid holidays and vacation, • Retirement plan with matching contributions, • Tuition Assistance Program, • Wellness Program, • Employee Assistance Program, • Employee Recognition Programs If you think you have the necessary qualifications and drive to excel in our team, we invite you to apply now and join us at voestalpine Railway Systems Nortrak. Apply today! voestalpine Railway Systems Nortrak (“Nortrak”) is a subsidiary of voestalpine AG () one of Europe’s premier steel producers with over 50,000 employees worldwide. Nortrak is closely affiliated with voestalpine’s Railway Systems group which operates in 21 countries across the globe to provide cutting edge system-based solutions to railroads and transits. Our website is voestalpine Railway Systems Nortrak is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected Veteran status, and any other federal, state, or locally protected classifications. INDHP

Minimum of an Associate's degree in Welding, Welding Technology, or a related field from a regionally accredited college or university, OR,. A postsecondary diploma and/or a nationally recognized certification and/or completion of a union apprenticeship with the ability to achieve an Associate's deg

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Earn up to $120K/yr Job Summary: Sysco has immediate job openings for dependable local CDL A Delivery Truck Driver to safely and efficiently operate a tractor-trailer and manually unload/deliver various products (meats, produce, frozen foods, groceries, dry goods, supplies, etc.Our truck drivers bu

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Earn up to $120K/yr Job Summary: Sysco has immediate job openings for dependable local CDL A Delivery Truck Driver to safely and efficiently operate a tractor-trailer and manually unload/deliver various products (meats, produce, frozen foods, groceries, dry goods, supplies, etc.Our truck drivers bu

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Sysco has immediate job openings for dependable local CDL A Delivery Truck Driver to safely and efficiently operate a tractor-trailer and manually unload/deliver various products (meats, produce, frozen foods, groceries, dry goods, supplies, etc.Our truck drivers build relationships with each custom

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

As a Delivery Driver at Amazon, you will be responsible for delivering packages to customers in a safe and timely manner.You will use a company-provided vehicle to make deliveries, following a predetermined route and schedule.Your role is critical in ensuring that customers receive their orders on t

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand periods.Safely operate

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Trillium Drivers is now seeking a Non-CDL driver for a run going to Jackson, TN and starts asap!.Ability to pass pre-employment screenings.Trillium Driver Solutions has been recruiting and hiring CDL and Non-CDL Drivers for over 30 years.Whether you are seeking casual work or a full time driving car

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

As a Delivery Driver at Amazon, you will be responsible for delivering packages to customers in a safe and timely manner.You will use a company-provided vehicle to make deliveries, following a predetermined route and schedule.Your role is critical in ensuring that customers receive their orders on t

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand periods.Safely operate

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si