Trabajos welding en Albuquerque, New MexicoCrear alertas

Job Description Description The primary role of the Welder is to make appropriate welds to repair, refurbish or fabricate trash/recycling bins and sometimes trucks. Essential Responsibilities 1. Perform welding, fabrication and fabricating repairs on bins and trucks., 2. Conduct safety checks on welds and fabrications on bins and trucks., 3. Deliver and pick up trash and recycling receptacles as required, 4. Utilize fleet maintenance software program to document work., 5. Deliver repaired, refurbished and/or fabricated recycling receptacles to customer cites., 6. Paint recycling receptacles., 7. Create work orders., 8. Observe and comply with hazardous waste and material handling and disposal procedures and regulations as set forth by local, state and federal environmental and health agencies., 9. Observe and comply with all applicable safety regulations, rules, policies and procedures., 10. Maintain clean, safe and organized work space., 11. Maintain collaborative working relationship with drivers, operators and coworkers and communicate timeline for downed vehicles., 12. Mentor and provide assistance to Welder Trainees., 13. Participate in external, Department and Company-wide trainings to increase skill sets., 14. Perform other duties as assigned. Knowledge, Skills & Abilities Knowledge of: · Welding and fabrication principles and practices. · Tools, equipment and systems used in the practice of welding and fabrication. · Federal, state and local job site health and safety rules, regulations and best practices. Ability to: · Maintain a positive attitude with coworkers. · Proactively establish trust and credibility with coworkers by maintaining accountability. · Contribute to the team dynamic by promoting inclusion, support and collaboration amongst coworkers. · Take initiative, self-manage time and productivity through multitasking. · Effectively and concisely communicate both orally and in writing. · Think independently and creatively to problem solve. Education, Training & Experience 1. Three years of welding and fabricating experience., 2. Clas D license with clean driving record required., 3. Experience in the resource recovery industry a plus., 4. Certifications a plus. Supplemental Information Universal Waste Systems, Inc. celebrates diversity and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status. This description is not intended and should not be construed to be an exhaustive list of all responsibilities, skills, effort, work conditions, and benefits associated with the job.

Job Description DESCRIPTION: A Fabricator’s job is a skilled worker who uses tools and equipment to transform components and materials into finished doors and frames. KEY DUTIES AND RESPONSIBILITIES: ● Read and interpret blueprints, engineering drawings, and specifications. ● Measure, cut, and assemble parts. ● Operate machinery like shears, grinders, and welding machines. ● Perform quality checks. ● Coordinate with project managers and other team members. ● Maintain a safe and clean work environment. ● Ensure products meet specific cations and standards. JOB SPECIFICATIONS: ● Experience in door, frame, and hardware industry ● Ready to learn new tools and technologies to assist in job ● Able to read and interpret drawings, specifications, and work orders ● Be organized and have strong attention to detail WORKING CONDITIONS / PHYSICAL DEMANDS: Work may be performed in an office, warehouse or shop environment with exposure to noise from equipment. Physical demands associated with a shop environment. May need to lift/move materials up to 50lbs. with or without assistance. May be required to drive a forklift.

Job Description Welding Structural and Misc. Steel products. Job includes; grinding, plasma/torch cutting, layout/fit up - Self Motivated - Ability to diagnose and troubleshoot welds and welding machine - Ability to follow directions - Must have experience - Ability to read shop drawings/plans - Must be able to pass drug test - Must be able to pass AWS D1.1 plate test (GMAW) - Must have reliable transportation - Able to work overtime and weekends, when needed - Stick welding and field experience preferred but not required - Spray transfer experience preferred - Compensation is determined from experience and weld test.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Albuquerque, NM. Most positions are first shift with a pay scale based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Air Arc, • Repair Welding, • Pipe & Mechanical, • Basic Tools for the Trade, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Overview: Onin Staffing is currently seeking a skilled Welder to join our client’s team in the Albuquerque area. This is a full-time, temp-to-hire opportunity with competitive pay starting at $20 per hour, depending on experience. Key Responsibilities: • Perform MIG, TIG, or Stick welding based on project requirements, • Read and interpret blueprints, schematics, and technical drawings, • Inspect welds for accuracy and quality, • Operate welding equipment and tools safely and efficiently, • Maintain a clean and organized work area, • Proven experience as a welder in a manufacturing or industrial setting, • Ability to read and interpret technical documents and drawings, • Strong attention to detail and commitment to quality, • Must be able to pass a welding test, • Reliable transportation and strong work ethic Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team Company DescriptionDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like: Weekly Pay $5 Prescription Drugs $5 Doctor's Visit Copays Free Teledoctor Service Free Counseling Services Life Insurance Included Vision Insurance Included Dental Insurance Included Vacation and Holiday Pay Scholarship Opportunities NEW! 401(k) Retirement Plan Free Legal Services Our unbeatable employee discount program If this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you! –Your Ōnin teamDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like:\r\n\r\nWeekly Pay\r\n$5 Prescription Drugs\r\n$5 Doctor's Visit Copays\r\nFree Teledoctor Service\r\nFree Counseling Services\r\nLife Insurance Included\r\nVision Insurance Included\r\nDental Insurance Included\r\nVacation and Holiday Pay\r\nScholarship Opportunities\r\nNEW! 401(k) Retirement Plan\r\nFree Legal Services\r\nOur unbeatable employee discount program\r\nIf this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you!\r\n\r\n–Your Ōnin team

Job DescriptionExperienced MIG Welder for Manufacturing Job Job Description As a Welder in our fabrication shop, you will be responsible for creating metal pieces such as stars and railings. Your role will involve moving materials, measuring, cutting, grinding, fitting, and welding, all while using various tools to align and fit parts to specifications. Safety and teamwork are top priorities in our industrial fabrication setting. Essential Skills • Proficiency in welding techniques including MIG welding., • Ability to read and interpret blueprints and measurements (1/16", 1/8", 1/4", 1/2")., • Experience in using hand and power tools, including hand torches., • Preferred experience in an industrial setting., • Ability to confidently use a tape measure., • Move and prepare materials for welding., • Measure, cut, and grind metal components., • Fit and weld metal pieces according to specifications., • Use a variety of tools including hand tools, saws, and plasma cutters. Work in a structural steel fabrication shop that creates architectural components such as stairs and railings. 3:00pm to 11:30pm, Monday to Friday, with a 10% differential for the 2nd shift. Apply today and a recruiter will reach out to you ! Pay and Benefits The pay range for this position is $18.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Albuquerque,NM. Application Deadline This position is anticipated to close on Oct 15, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Scott’s Fencing company is looking for a Fence Installer to join our team. Our ideal candidate has held some fencing or construction experience, whether in fence installation or a similar field. Experience in welding, wood fencing, vinyl fencing, or concrete work is a plus, as is formal training in any related discipline. You must pass a drug test and background check. You must have excellent physical strength and stamina to keep up with this work. 5 days a week every week. Fence Installer Duties and Responsibilities · Establish the layout and design of fences · Dig post holes and mix cement for installation · Install the main posts & fencing, carry over 50lbs and lift 50lbs overhead constantly throughout the day. · Follow direction of Foremen Fence Installer Requirements and Qualifications · Must have driver’s license · Must be able to travel out of town · Fencing and construction experience a plus · Skills with both hand and power tools · Physical strength and stamina · Communication skills · 40 hours a week must be reliable, must be at work every day -Must speak english Benefits -Health Insurance -Paid Time Off can be earned #hc90770

Job Description Velos is a full-service engineering and technical services company supporting agencies such as the DoD NASA, and NOAA. As an SBA-certified HUBZone small business, Velos combines agile and highly skilled engineering and technical support-delivering unmatched execution to our customers. Our government relations consulting business area allows us to represent and support leaders in the defense, aerospace, intelligence, and related industries with decades of experience in market analysis and strategic planning. We are looking for highly qualified candidates for an upcoming contract positioned onsite at the Kirtland AFB in Albuquerque, NM supporting the Air Force Research Laboratory (AFRL) SSHINE contract. Manufacturing and Test Technicians: Qualified candidates are experienced Technicians, preferably with experience working on classified programs. Roles and Responsibilities: Supports or leads the fabrication, assembly, and installation of apparatus and control instrumentation used to test experimental or prototype mechanical, electrical, electromechanical, hydromechanical, or structural spacecraft, instruments, ground systems, or subsystems, and tests and records results, utilizing engineering principles and test technology. Participates in conversations with engineering personnel to resolve fabrication problems relating to specifications and to review test plans, such as types and cycles of tests, conditions under which tests are to be conducted, and duration of tests. Fabricates precision parts for test apparatus, using metalworking machines such as lathes, milling machines, and welding equipment, or interprets specifications for workers fabricating parts. Examines parts for conformance with dimensional specifications, using precision measuring instruments. Coordinates and participates in installing unit or system to be tested in test fixtures, connecting valves, pumps, hydraulic, mechanical or electrical controls, cabling, tubing, power source, and indicating instruments. Activates controls to apply electrical, hydraulic, pneumatic, or mechanical power and subject test item to successive steps in test cycle. Monitors controls and instruments and records test data for engineer's use. May recommend changes in test methods or equipment for engineering review. Workers are classified according to engineering specialty or type of product tested. Education Requirements: • 10+ years of experience with AA degree or 5+ years of experience with BS/BA degree. Clearance Requirements: • TS with ability to obtain SCI. Velos is an equal opportunity employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sex, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. This Opportunity: We have immediate full-time career opportunities for a Level II NDT/ CWI Technician in several of our offices. Certerra offers on-going training and the ability to gain valuable career experience and technical certifications. Job Duties • Test and inspect using NDT and or CWI procedures on construction job sites., • Prepare daily reports on observation and testing activities, • Review reports and test data for accuracy and completeness Job Requirements: Candidate must have a minimum qualification of Level II certifications: CWI Gamma Radiography Testing (RT) Magnetic Particle Testing (MT) Candidate must meet the following minimum requirements: Work related experience in utility and/or industrial construction Current State card or ASNT-IRRSP Documented education and on-the-job training Good communication and report writing skills Clean motor vehicle record Pass a pre-employment drug screen Complete a FBI fingerprint criminal background check or TWIC card Additional preference given for candidates with the following certifications: Certified Welding Inspector (AWS) Ultrasonic (SWUT / PAUT) Liquid Penetrant (PT) Physical Demands • Physical examination required to obtain medical clearance to work, • Ability to stoop, kneel and to routinely lift and carry 50 pounds, • Clean driving record and capable of being insured for driving company vehicles, • Able to work in variable outside conditions, including extreme heat or cold if need We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Albuquerque, NM. These are mainly first shift opportunities with a pay rate dependent on experience & skill level. If you are a Maintenance Technician and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope (can include any or all of the following): • Perform Preventative & Corrective Maintenance on Machinery & Equipment, • Maintain Equipment & Facility to Ensure Maximum Reliability, • Electrical, Hydraulic & Pneumatic Maintenance, • Troubleshoot, Diagnose and Develop Solutions for Issues with Equipment, • Tech Maintenance, • Work on Business Unit Facilities, Equipment, Tooling, etc., • Repair work, • Some Welding, • General Building Maintenance, HVAC & Plumbing Repairs, • Able to Read and Understand Blueprints & Schematics, • Tools of the Trade, • Proper PPE must be worn, • Safety Oriented, • Prior Construction Experience Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Albuquerque, MN. Most positions are first shift with a pay range based on experience & skill level. If you are a Millwright and want to work alongside other proven Craftsmen who emphasize safety, productivity, and superior workmanship, this is your chance to advance your career! Job Scope to include any or all of the following: • Installation, Maintenance, Repair of Industrial Machinery and Equipment, • Conveyor Work, • Installing Racking, • Helping with Set Up, Remodel & Assembling New Conveyors, • Some Welding, • General Labor, Job Site Clean Up, • Moving/Relocating Machinery, • Shut Down Work, • Mechanically Inclined, • Basic Tools for the Trade, • Proper PPE must be worn Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Overview: Responsibilities: • Inspect, maintain, and repair industrial machinery and mechanical systems., • Perform preventive maintenance to reduce equipment failures., • Diagnose mechanical issues and replace or repair defective parts., • Read and interpret technical manuals, blueprints, and schematics., • Operate hand tools, power tools, and precision measuring instruments., • Ensure compliance with safety standards and company policies., • Document maintenance work and repairs performed. Skills and Experience: Qualifications: • Previous experience as an Industrial Mechanic or related role., • Knowledge of hydraulic, pneumatic, and mechanical systems., • Ability to troubleshoot and repair mechanical equipment., • Basic welding and fabrication skills are a plus., • Strong attention to detail and safety awareness., • High school diploma or equivalent; technical training preferred. Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team Company DescriptionDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like: Weekly Pay $5 Prescription Drugs $5 Doctor's Visit Copays Free Teledoctor Service Free Counseling Services Life Insurance Included Vision Insurance Included Dental Insurance Included Vacation and Holiday Pay Scholarship Opportunities NEW! 401(k) Retirement Plan Free Legal Services Our unbeatable employee discount program If this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you! –Your Ōnin teamDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like:\r\n\r\nWeekly Pay\r\n$5 Prescription Drugs\r\n$5 Doctor's Visit Copays\r\nFree Teledoctor Service\r\nFree Counseling Services\r\nLife Insurance Included\r\nVision Insurance Included\r\nDental Insurance Included\r\nVacation and Holiday Pay\r\nScholarship Opportunities\r\nNEW! 401(k) Retirement Plan\r\nFree Legal Services\r\nOur unbeatable employee discount program\r\nIf this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you!\r\n\r\n–Your Ōnin team

Job Description Job Title: Staff Engineer Location: Albuquerque, NM Certerra offers excellent career opportunities that begin with a stable and challenging workplace within a culture of safety and quality. We take pride in our ethics, the excellence of our employees, and the quality of our work. Certerra is a consulting firm with more than 65 years of professional service in the southwestern United States in the fields of geotechnical engineering, environmental engineering, construction materials engineering and testing, nondestructive testing, and welding inspection. We have immediate full-time opportunities for a Staff Engineer in our Albuquerque, NM office. Certerra provides on-going training and the ability to gain valuable career experience and technical certifications. Responsibilities include: • Conduct field inspection and monitoring programs, • Advise on geological suitability of sites for construction, • Study the nature of ground and surface waters, soils, bedrock, and environmental effects for land use and planning, • Perform mapping, field, and laboratory testing and analysis, • Collect and oversee soil and rock sampling, • Assist in analysis of soil to determine engineering characteristics, • Inspect development sites and review engineering plans, • Assist in writing technical reports Qualifications: • BS or MS in Civil or Geotechnical Engineering (E.I.T. or P.E. preferred; preference given to candidates with P.E. license), • 0 to 5 years of related experience, • Experience in construction materials testing is preferred, • Strong technical, analytical, and communication skills, • Proficiency with Microsoft Office Suite (Word and Excel) Requirements: • Valid driver’s license and good driving record, • Ability to pass a pre-employment drug screen Compensation: Salaries are dependent on experience and certifications. To learn more about Certerra and apply online, visit our website at certerra.com. Equal Opportunity Employer.

Job Description Certerra. is a consulting firm with over 65 years of quality service that offers professional services in the southwestern United States in the fields of geotechnical engineering, environmental engineering, construction materials engineering and testing, nondestructive testing, and welding inspection. Certerra has an excellent opportunity for a registered Geotechnical Engineer in our Albuquerque, New Mexico office. Ideal candidate will possess a BS or MS in Civil Engineering or Geological Engineering, with a P.E. license and/or ability to obtain within 6 months in New Mexico, Texas, and Arizona. You will assist with conducting and preparing reports for geotechnical evaluations for a variety of projects including foundation, pavement, and slope stability analysis. Study the nature of ground and surface waters, soils, bedrock for land use and planning. Includes field work, logging borings, mapping, field and laboratory testing and analysis. Perform field or laboratory geotechnical testing, analysis of the strength of soil and rock, consolidation/compression/swell properties, retaining walls, slope stability, seismic refraction and refraction-micro tremor surveys for rippability and seismic site classifications. Assist in analyzes of soil to determine engineering characteristics Review engineering plans Inspect development sites Collect/oversee soil sampling using borings and test pits Perform/oversee laboratory tests Assist in making recommendations regarding foundation design, soil bearing pressure, slope stability and lateral earth pressures Assist in preparing cost proposals Assist in writing geotechnical evaluation reports All candidates must have a valid driver's license, a good driving record and pass a pre-employment drug screen. We offer an excellent benefit package which includes medical, dental, vision, paid holidays, paid time off, 401K, education / training and more.

Job Description Incorporated in 1997, GeoTek is a full-service consulting engineering firm specializing in geotechnical engineering, construction materials testing, special inspections, and environmental consulting. We are founded on the principle of providing strong business partnerships with our clients by demonstrating a committed passion for those who demand technical advice and responsive customer service that adds value to their projects. Our mission is to build and maintain strong business partnerships by demonstrating a committed passion for the principles of high-quality customer service and professional consultation that results in optimum value to our clients. We provide our employees with just compensation and a challenging, stable work environment that embodies ongoing opportunities for them to further their individual goals. We also aim to furnish a good return for our shareholders by consistently achieving our financial objectives. GeoTek offers a variety of jobs to build on your professional career, with multiple offices located in Nevada, California, Idaho, Arizona, and New Mexico. Our branch offices serve more than just the state they are located in, providing services across a wide region. We are currently looking for Special Inspectors at our Albuquerque, NM office. In addition to a competitive rate, we also offer vehicle reimbursement and a full suite of benefits. SUMMARY:Performs a variety of testing, project specific observations, and site assessment duties. Operates equipment, conducts tests/assessments and reports data. Works from drawings, specifications, diagrams, schematics and specific verbal and written instructions. Uses specific methods to observe site activities and take samples and perform tests. Makes minor adjustments and modifications as needed.ESSENTIAL JOB FUNCTIONS AND DUTIES:Effectively communicate with Supervisor and Dispatch to obtain daily work assignments. Prepares daily and data reports of testing and inspections. Competent in the performance of all tests and inspections assigned. Prepares and submits company documents related to the projects. Daily prepares and submits own time sheet for approval. Obtains proper field authorizations are signed by the client when required or when work beyond the original scope is requested. Advises Supervisor or Project Manager of any changes in work scope or of any potential budget over runs. Maintains positive business relationships with clients, contractors, subcontractors, material suppliers, etc.Requirements: (must have at least ICC Structural Masonry or Reinforced Concrete and ACI Field certification, the more the better)*ICC (ICBO) Certification in one or more of the following: • Reinforced Concrete, • Structural Masonry, • Structural Steel & Welding Pay Range $26—$35 USD GeoTek is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law.

Job Description Level II Nondestructive Testing (NDT) Technician Location: Albuquerque, NM Certerra has excellent full-time opportunities available in our Albuquerque, NM office for experienced Nondestructive Testing (NDT) professionals. We are seeking Level II certified individuals in Phased Array Ultrasonic Testing (PAUT), Magnetic Particle Testing (MT), and Penetrant Testing (PT). Responsibilities * Perform NDT inspections using PAUT, MT, and PT in accordance with industry codes and client specifications. * Utilize automated, semi-automated encoders, and manual scanning techniques to complete inspections. * Prepare accurate, detailed, and timely inspection reports. * Provide documented on-the-job training (OJT) and maintain certifications as required. * Collaborate with team members and project managers to ensure work is completed safely, efficiently, and to quality standards. * Communicate effectively with clients and colleagues regarding inspection findings and project status. * Adhere to all company safety policies and procedures, including pre-employment and ongoing compliance requirements. Preferred Experience * Working knowledge of API 650, API 1104, ASME B31.1, ASME B31.3, ASME Sec. VIII. * Familiarity with In-Line Inspection (ILI), FlexoFORM, HydroFORM, and/or Creaform technologies. * Prior experience in commercial and/or industrial construction inspection industries. * AWS Certified Welding Inspector (CWI) credential is a plus, but not required. Qualifications * Current Level II certifications in PAUT, MT, and PT. * Minimum of two (2) years of related work experience. * Strong written and verbal communication skills. * Ability to work independently as well as within a team environment. * Clean motor vehicle record. * Must successfully pass pre-employment drug screening and criminal background check. Benefits Certerra offers an excellent benefits package for all full-time employees, including: * Medical, dental, and vision insurance. * Paid holidays and paid time off (PTO). * 401(k) retirement plan. Certerra is proud to be an equal opportunity employer and values diversity in the workplace.

Job Description Great Western Trailer (GWT) is immediately hiring full-time Tank Technicians to service semi-trailers at our Albuquerque, NM facility. As a Tank Technician, you will inspect, repair, and maintain tanks in accordance with Department of Transportation (DOT) and ASTM regulations. Be a part of our team – Apply now! What’s in it for you? • Weekly Paychecks – Get paid on time, every time., • Weekday Schedule – Monday-Friday, 8:00 AM – 4:30 PM (No weekends!)., • Comprehensive Benefits Package – Health, dental, vision, and life insurance., • 401K, Flexible Spending & Health Savings Account options., • Paid Time Off & Sick Leave – Enjoy work-life balance., • Employee Perks – Discounts, Employee Assistance Program, and a $400 Benefit Card. Who We’re Looking For GWT is looking for hardworking individuals who are: • Quick Learners – Willing to follow instructions, ask questions, and grow their skills., • Team Players – Punctual, reliable, and respectful, with the ability to work independently., • Focused & Detail-Oriented – Committed to accuracy, quality, and safety., • Safety-Minded – Always adheres to company safety policies and procedures. Tank Technician Responsibilities Inspect, Service & Repair: • Tanks and trailers to meet FHWA, FMCSA, DOT HM183, and hazmat standards., • Pneumatic and hydraulic control systems, product pumps, and piping., • Overfill systems (Scully, Civacon, Flotech, Titan Logix, Garnett)., • Air brake systems, valves, sensors, dome lids, shoes, drums, pads, and rotors., • Low voltage wiring, harnesses, lights, batteries, and charging systems., • Chassis, side-shells, caps, doors, retainers, fasteners, floors, and plates., • Perform preventative maintenance and minor mechanical repairs., • Install add-on components (toolboxes, pumping systems, ladders, brackets)., • Perform aluminum and steel MIG/TIG welding, including in confined spaces., • Fabricate hydraulic pump systems and perform wood/metal carpentry., • Complete wreck repairs and custom fabrication., • Complete Mechanic’s Service Reports., • Prepare FHWA and HM183 testing documentation., • Maintain clean, organized workspaces and tools. Required Qualifications • Minimum 1 year of experience servicing tank vehicles., • Ability to lift/move up to 50 lbs., • Own a personal set of hand tools., • Strong mechanical knowledge of semi-trailer equipment and repair tools., • Ability to operate hand, power, pneumatic tools, and welding equipment., • Strong troubleshooting skills and ability to follow service guidelines. Preferred Qualifications • 3+ years of tank vehicle service experience., • Tank, ASE, or welding certifications., • Bilingual (Spanish) is a plus., • Willingness to work overtime as needed. Physical Demands & Work Environment • Frequent standing, walking, kneeling, and lifting (up to 50 lbs.)., • Use of hands and arms for handling tools and materials., • Work in confined spaces and at heights., • Exposure to mechanical parts, chemicals, fumes, and varying temperatures., • Moderate to loud noise levels; potential risk of electrical shock., • Work may be performed in a shop, yard, or mobile service vehicle. About Great Western Trailer Great Western Trailer (GWT) is a growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states. We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK—and we’re expanding! Apply Today! If you're passionate about tank trailer repair and want to grow with a company that values your skills, apply now and join our team in Albuquerque, NM! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Job Description COMPANY OVERVIEW: CERTERRA is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Position Description Certerra Sub-Surface-Enviro-Drill has an excellent full-time opportunity for an entry level Site Coordinator or an Assistant Driller in Albuquerque, NM. You will help prepare work sites and obtain laboratory samples used in determining the geological character of the ground, nature of ore, strength of foundation material and/or environmental sampling. In addition, you will perform other duties necessary to maintain facilities, work sites, and equipment and to ensure safe working environments. Travel is required throughout Arizona and New Mexico. We offer first-rate career opportunities that begin with a stable, challenging workplace and a culture of safety and quality. We pride ourselves on our ethics, excellence, and exceeding expectations. We are looking for people with a track record of success, either at work or in other aspects of their lives. Required: • Reliable, hardworking, and eager to learn geological drilling process, • Able to work under challenging conditions, • Must follow safety procedures, • Able to travel, • Strong mechanical aptitude, • Respectful, team orientation, • Able to lift 50 lbs, • Pass a pre-employment drug test, • Must have and maintain a clean motor vehicle record Preferred: • CDL driver’s license, • Welding background, • Field experience in desert climate Enviro-Drill, Inc. provides excellent benefits packages that includes medical, dental, vision, paid time off, 401K and much more including assistance in obtaining your CDL. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts in outside weather conditions and is occasionally exposed to wet and/or humid conditions, and fumes or airborne particles. The noise level in the work environment is usually moderate. We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated based on their ability, competence, and performance of the essential functions of their positions. There will be no discrimination based on race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such people will be hired based on their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job Description* Volt is hiring immediately * Volt is an Equal Opportunity Employer Volt is immediately hiring a Quality Assurance Technician for a well-known manufacturer in Albuquerque, NM. As a Quality Assurance Technician you will: • Perform product inspections to identify sub-standard completion of:, • Welds on steel structures in-process and post blast in fabrication shop., • Machined parts, • Control systems and sub-components for proper configuration and operation, • Interior and exterior paint on prime products, • Vendor parts, • Perform and assist to improve the incoming material inspection process., • Work with Product Support personnel to identify, solve and prevent warranty issues., • Introduce new QC technologies., • Perform product testing, which may include operating heavy equipment., • Communicate and resolve quality issues with suppliers and internal customers., • Lead/assist other inspection personnel.Quality Assurance Tech candidates must meet the following requirements for consideration:, • Must have a minimum of five years’ experience in a quality role., • Ability to read blueprints and understand drawing tolerances., • Ability to measure parts and assemblies using calipers, micrometers, etc., • Capable of producing results with cross functional groups., • Great communication skills., • Good conflict resolution skills., • Ability to stay objective when personalities present challenges., • Physically capable of lifting 30lbs and capable of standing for long periods of time., • Computer experience with Microsoft Office suite, Adobe and any ERP system., • CWI (Certified Weld Inspector)., • Supervisory experience., • Experience with ISO implementation and compliance is a big plus., • Experience with flux-core/ MIG welding., • Experience with mining and construction equipment.The schedule is Monday – Friday, 7:00am- 4:30 pm. Pay for this position is $20-$25/hr. DOE *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

Job Description CONTACT NAME: Shawn Coffey EMAIL and PHONE: SCHOOL YEAR: 2025-2026 LOCATION: Valley HS WEEKLY HOURS - .5 COURSE CREDIT: No more than 10 hours per week. No more than 6 hours per day, plus complete a self-reflection project and present it during the last week of the internship. Currently a 1-2 semester limit. HOURLY PAY: $15/hr stipend (No taxes withheld) WHEN WORK HAPPENS: Monday through Friday, 8:00 AM - 3:00 PM unless instructed differently by your SEL Teacher/Advisor/Mentor Contact Name above. About Albuquerque Public Schools Albuquerque Public Schools (APS) is the largest of New Mexico's 89 school districts, serving about a fourth of the state's public school students in 143 schools scattered across 1,200 square miles. APS is the largest employer in Albuquerque, providing full-time jobs for more than 11,000 people, including about 5,300 teachers. Summary of Position Students will be responsible for marketing, materials lists, job estimates, Welding and Fabrication duties. Hard Skills • Strong written and oral communication skills, • Organized student with a positive attitude, curiosity, and willingness to learn, • Attention to work rules and deadlines Exposure & Training provided through internship We will teach you- Students will learn industry standard business practices that include- Safety, customer service, job estimations, material lists, problem solving, welding and fabrication. Working and Physical Conditions/Onboarding Requirements (**vaccinations, etc.) Please speak to your SEL Teacher/Advisor/Mentor regarding working and physical conditions at your intern site. You will also be required to sign and upload a W-9 and Parental Permission form. In addition, you will be required to electronically acknowledge Non-Disclosure and Internship agreements. As part of your application, you will be expected to fill out your emergency contact information, school, and other personal information as required by Albuquerque Public Schools Work-Based Learning programs and the New Mexico Public Education Department. Failure to do so or omission, or erroneous information will result in your application being rejected.

Job Description Great Western Trailer (GWT) is actively hiring skilled and motivated Trailer Technicians to join our growing team at our Albuquerque, NM facility. If you have experience in semi-trailer maintenance and repair and are looking for a company that values your skills and dedication, we encourage you to apply today. Be a part of our team – Apply now! What’s in it for you? • Weekly Paychecks – Get paid on time, every time., • Weekday Schedule – Monday-Friday, 8:00 AM – 4:30 PM (No weekends!)., • Comprehensive Benefits Package – Health, dental, vision, and life insurance., • 401K, Flexible Spending & Health Savings Account options., • Paid Time Off & Sick Leave – Enjoy work-life balance., • Employee Perks – Discounts, Employee Assistance Program, and a $400 Benefit Card. Who We’re Looking For GWT is looking for dedicated individuals who are: • Quick Learners – Willing to follow instructions, ask questions, and grow their skills., • Team Players – Punctual, reliable, and able to work independently or collaboratively., • Detail-Oriented – Focused on quality, accuracy, and safety. Trailer Technician Responsibilities • Inspect and repair semi-trailers, including brakes, wiring, bodywork, lift gates, and more., • Install and replace add-on components such as toolboxes, winches, and ramp kits., • Perform fabrication and welding as needed., • Complete service reports and ensure all work meets quality and safety standards. Required Qualifications • Reliable transportation to and from work., • Own a personal set of hand tools., • Strong mechanical aptitude and experience with semi-trailer equipment and maintenance., • Ability to operate hand tools, power tools, and pneumatic tools safely and efficiently., • Willingness to work overtime when needed. Preferred Qualifications • Valid driver’s license (a plus, but not required)., • 3+ years of experience in semi-trailer repairs., • Industry certifications such as ASE or welding certification., • Bilingual (Spanish) is a valuable asset. Physical Demands & Work Environment • Frequent standing, walking, kneeling, and lifting (up to 50 lbs.)., • Work may be performed in a shop, yard, or mobile service environment., • Exposure to mechanical parts, chemicals, fumes, and varying temperatures., • Moderate to loud noise levels. About Great Western Trailer Great Western Trailer (GWT) is a fast-growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states—and more expansions coming soon! We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK. Apply Today! If you have the skills and passion for semi-trailer repair, we want to hear from you. Join a company that values your hard work and offers opportunities for career advancement. Apply now and take your career to the next level with Great Western Trailer in Albuquerque, NM! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Job Description Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. This Opportunity: We have immediate full-time career opportunities for a Level II NDT/ CWI Technician in several of our offices. Certerra offers on-going training and the ability to gain valuable career experience and technical certifications. Job Duties • Test and inspect using NDT and or CWI procedures on construction job sites., • Prepare daily reports on observation and testing activities, • Review reports and test data for accuracy and completeness Job Requirements: Candidate must have a minimum qualification of Level II certifications: CWI Gamma Radiography Testing (RT) Magnetic Particle Testing (MT) Candidate must meet the following minimum requirements: Work related experience in utility and/or industrial construction Current State card or ASNT-IRRSP Documented education and on-the-job training Good communication and report writing skills Clean motor vehicle record Pass a pre-employment drug screen Complete a FBI fingerprint criminal background check or TWIC card Additional preference given for candidates with the following certifications: Certified Welding Inspector (AWS) Ultrasonic (SWUT / PAUT) Liquid Penetrant (PT) Physical Demands • Physical examination required to obtain medical clearance to work, • Ability to stoop, kneel and to routinely lift and carry 50 pounds, • Clean driving record and capable of being insured for driving company vehicles, • Able to work in variable outside conditions, including extreme heat or cold if need We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job Description Job Title: Pavement Materials Testing Engineer Location: Albuquerque, NM Certerra, one of the largest independent construction materials testing laboratories and engineering firms in the western United States, is seeking an entry-level or mid-level Pavement Materials Testing Engineer to join our growing Albuquerque, NM team. This is an excellent career opportunity offering a stable and challenging workplace within a culture of safety, quality, and professional growth. Recent graduates are encouraged to apply. Certerra has provided quality professional services for over 65 years in the fields of geotechnical engineering, environmental engineering, construction materials engineering and testing, nondestructive testing, and welding inspection. The ideal candidate will have related work experience, a strong technical background, and an interest in pavement materials testing. Duties include but are not limited to: • Perform and oversee binder testing and hot mix asphalt designs, • Assist in analysis of bituminous paving materials, • Review project specifications and plans, • Assist in implementing new testing capabilities and test protocols, • Assist in preparing cost proposals, • Assist in marketing and follow up with clients Minimum qualifications for the position include: • Civil Engineer (EIT/PE preferred but not required at time of hiring), • Proficiency in Microsoft Office (Word and Excel), • Strong skills in writing, communication, organization, and attention to detail This position may require some overnight travel throughout the southwest. Candidates must have a clean motor vehicle record and successfully pass a pre-employment drug test. To learn more about us and apply online, visit our website at certerra.com. No agencies please. Equal Opportunity Employer.

Job Description Description Maintenance technicians are responsible the installation/startup and troubleshooting of all mechanical and electrical processes used in manufacturing, as well as support equipment located in the building or on the grounds. Will be working with industrial voltages, servo motors in a fully automated plant. Skills maintain, repair, Troubleshooting, Welding, millwright, Schematic, diagrams, Electrical troubleshooting, Mechanical, Electrical, Maintenance technician, Preventive maintenance, conveyor maintenance, motor repair, production equipment, maintenance mechanic electrical Top Skills Details maintain,repair,Troubleshooting,Welding,millwright,Schematic,diagrams,Electrical troubleshooting,Mechanical Additional Skills & Qualifications 1+ years of experience as a maintenance technician in a production environment 1-2 years experience plus general knowledge and HVAC, manufacturing equipment, hydraulic systems (mechanical) and/or industrial electrical systems, control wiring, control systems proficient with lock out tag out procedures (LOTO) mechanical aptitude proficient with hand tools and power tools Experience Level Intermediate Level Pay and Benefits The pay range for this position is $64792.00 - $64792.00/yr. health dental vision 401k vacation paid time off Workplace Type This is a fully onsite position in ALBUQUERQUE,NM. Application Deadline This position is anticipated to close on Oct 13, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Maintenance Mechanic Job Description The Maintenance Technician is responsible for the upkeep and repair of all equipment, including production machinery, warehouse systems, office areas, and the building itself. The role covers a broad range of maintenance tasks such as mechanical, electrical (up to and including three-phase), plumbing, painting, welding, and some carpentry. As a member of the team, the ideal candidate must be able to work independently or as part of a team with minimal supervision. Responsibilities • Work closely with Equipment Operators and Supervisors to coordinate and perform maintenance activities., • Apply troubleshooting skills to a wide variety of machine applications to address production needs., • Diagnose and repair control wiring, relay logic, motor drive circuits, control system devices, photo eyes, limit switches, proximity switches, and transducers., • Utilize tools such as Digital Volt Meter and AMP probes to diagnose electrical issues., • Perform mechanical, electrical, pneumatic, and hydraulic installation, repair, and servicing of machinery and support systems., • Conduct systematic preventive maintenance, including adjustments, inspections, and minor repairs on plant equipment., • Prioritize machine breakdown repairs to minimize production downtime., • Perform welding and machine shop tasks to repair and improve equipment and machinery., • Complete all assigned maintenance projects in a timely, efficient, and safe manner., • Maintain a clean and organized maintenance area for storage of parts and equipment, ensuring all shop equipment is properly maintained., • Adhere to all safety procedures, including OSHA regulations, and maintain a safe working environment., • Collaborate with shift supervisors and machine operators to stay informed of daily equipment issues., • Design and fabricate parts to improve equipment performance and safety., • Troubleshooting, • Maintenance technician skills, • Electrical and mechanical skills, • Hydraulics and pneumatics knowledge, • Preventive maintenance proficiency, • Repair and schematic interpretation, • Industrial maintenance expertise, • Welding and machine repair experience, • Mechanical and electrical troubleshooting, • Blueprint reading, • Proven experience in industrial maintenance, including mechanical, electrical, plumbing, and welding., • Ability to troubleshoot and repair various types of machinery, electrical circuits, and mechanical systems., • Strong knowledge of safety procedures and compliance with OSHA regulations., • Ability to work independently and as part of a team., • Strong organizational skills with the ability to maintain clean and safe work areas., • Ability to prioritize tasks and manage time effectively. We offer a bonus based on company performance, comprehensive medical, dental, and vision insurance, and a 401(k) retirement savings plan with a company match. Enjoy paid time off including vacation, company holidays, and parental leave, alongside an Employee Assistance Program. Other benefits include life insurance, disability coverage, and wellness programs. Work Environment The position is in an industrial work environment without air conditioning due to product moisture sensitivity. The schedule consists of 10-hour shifts from Monday to Thursday, 5am to 3:30pm, with a 30-minute lunch break. Some Fridays may be required depending on operational needs. Job Type & Location This is a position based out of Albuquerque, New Mexico. Pay and Benefits The pay range for this position is $21.60 - $31.20/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Albuquerque,NM. Application Deadline This position is anticipated to close on Oct 6, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Overview: Job Summary: We are looking for a skilled Forklift Mechanic to inspect, maintain, and repair forklifts and other material handling equipment. Responsibilities: • Perform routine maintenance and safety checks on forklifts, • Diagnose and repair mechanical, electrical, and hydraulic issues, • Replace or adjust parts such as brakes, motors, and wiring, • Keep accurate records of work performed and parts used, • Ensure equipment meets safety and operational standards, • Respond quickly to equipment breakdowns to reduce downtime Skills and Experience: Experience in the following areas is highly desirable, but we are willing to provide training for the right candidate who possesses some of the following experience and can learn the other aspects of the job. · General equipment and forklift maintenance · Planer/moulder setup · Saw filing and making planer/moulder knives · 3 phase electrical experience · Cutting/welding/fabrication Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team Company DescriptionDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like: Weekly Pay $5 Prescription Drugs $5 Doctor's Visit Copays Free Teledoctor Service Free Counseling Services Life Insurance Included Vision Insurance Included Dental Insurance Included Vacation and Holiday Pay Scholarship Opportunities NEW! 401(k) Retirement Plan Free Legal Services Our unbeatable employee discount program If this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you! –Your Ōnin teamDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like:\r\n\r\nWeekly Pay\r\n$5 Prescription Drugs\r\n$5 Doctor's Visit Copays\r\nFree Teledoctor Service\r\nFree Counseling Services\r\nLife Insurance Included\r\nVision Insurance Included\r\nDental Insurance Included\r\nVacation and Holiday Pay\r\nScholarship Opportunities\r\nNEW! 401(k) Retirement Plan\r\nFree Legal Services\r\nOur unbeatable employee discount program\r\nIf this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you!\r\n\r\n–Your Ōnin team

Field Mechanic III Position Summary: Travel to various locations to diagnose and perform complex maintenance and repair work on vehicles, machinery, and heavy-duty equipment in the field and on job sites. Conduct visual inspections, perform preventative maintenance, and fuel off-site equipment. This is a safety-sensitive position subject to random drug and alcohol testing. Supervision Received and Exercised: • Receive direction from supervisory or management staff, • Diagnose and perform complex repairs on vehicles, machinery, and heavy-duty field equipment, • Lubricate and fuel equipment; perform minor field repairs such as adjusting tracks, repairing hydraulic hoses, and changing teeth, • Assist in training less experienced mechanics; provide guidance on maintenance procedures and techniques, • Inspect and diagnose mechanical, electrical, and hydraulic issues; report findings to management, • Conduct diagnostics on electronic fuel systems and computer-controlled engines, • Perform precision measurements and calibrations on equipment and tools, • Diagnose and repair transmissions and differential assemblies, • Replace components, perform engine tune-ups, rebuild engines, and conduct safety inspections, • Perform welding and fabrication on damaged frames and specialized equipment, • Estimate time, materials, and equipment needed for tasks; recommend requisitions, • Interpret blueprints, wiring diagrams, and hydrostatic systems, • Operate shop machinery including lathes, presses, grinders, and blasters, • Maintain records of preventive maintenance; input data and prepare reports, • Drive commercial vehicles for delivery, pickup, and road testing, • Maintain cleanliness and general upkeep of the shop, • Lead and coordinate mechanical maintenance staff as needed, • Perform other related duties as assigned Minimum Qualifications: Education & Experience: • High school diploma or GED, • Two (2) years of technical training in automotive maintenance and mechanical repair, • Landfill Division: Valid NM CDL (Class A or B) with Hazardous Materials Endorsement; City Operator’s Permit within 6 months, • Mechanical inspection and repair techniques for internal combustion and diesel engines, • Operation of automotive and heavy equipment systems, • Electronic fuel and computer-controlled systems, • Electrical and hydraulic systems, • Perform complex mechanical repairs and diagnostics, • Operate automotive and mechanical repair equipment, • Diagnose and repair hydraulic, electrical, and mechanical systems, • Conduct tune-ups and electronic component repairs, • Work independently and follow instructions, • Communicate clearly and maintain effective working relationships, • Perform job functions with or without reasonable accommodation Working Conditions: Environment: Field-based; exposure to noise, dust, grease, fumes, and heavy equipment Physical Requirements: Moderate lifting and carrying; bending, stooping, kneeling, crawling; prolonged standing; operating motorized equipment

This position performs preventive maintenance that includes welding, boiler chemical testing and making necessary chemistry adjustments, resolving safety concerns, and preparing maintenance records.This in-plant position requires strong technical knowledge in industry equipment, the ability to work

The Metallurgy and Welding Engineering team at Sandia National Laboratories is seeking support from an R&D Undergraduate Summer Intern! The intern should be majoring in mechanical, materials, electrical, or related engineering or STEM discipline and able to work on site in Albuquerque, NM. The Metal

Conduct experiments and operations with resistance welding, tube welding, and other novel welding means. The Metallurgy and Welding Engineering team is seeking support from an R&D Undergraduate Year-Round Intern, specifically for our Weld Team! This intern will assist the team with welding processin

Kairos Power is seeking a highly motivated Welding Quality Control Supervisor to oversee welding inspection activities, manage compliance with ASME Section VIII, and lead the development and maintenance of in-house welding inspection programs towards future nuclear compliance. The ideal candidate wi