Welding jobs in Chattanooga, TennesseeCreate job alerts

Job Description OUR VISION: "To become an indispensable partner to building owners with mission-critical systems." POSITION SUMMARY/OBJECTIVE: The incumbent provides stable and dependable service, while learning trade-specific skills that will translate to additional opportunities and advancement within the Company. Base hourly rate of $18/hr - $20/hr KEY TASKS & RESPONSIBILITIES: • Under supervision, assists in carrying, hanging and assembling duct assemblies using screws, couplings, clamps, bolts, cement, plastic solvent, caulking, soldering and welding., • Performs general jobsite duties such as setup, material handling, post job clean-up., • Loads and unloads trucks using manual lifting or jobsite equipment such as forklifts or telehandlers., • Assists apprentices and journeymen in job planning, material storage at jobsites., • Participates in the removal / installation of HVAC and/or equipment duct work that is being completed on a daily basis., • Inventories and prepares all hand tools needed to complete daily tasks, as assigned., • Identifies potential risks and hazards while working in the field, and communicates them to management., • Utilizes proper PPE at all times, in adherence to Company policy and other project standards., • Actively learns and obtains job-related information via observation and direction from supervision., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture. (Approximations on a daily basis) Standing, Walking 4-6 Hours Reaching Above Shoulder Height 4-6 Hours Working with Body Bent at Waist 4-6 Hours Working with Arms Extended at Shoulder Level 2-4 Hours Kneeling, Crawling, Squatting 4-6 Hours Pushing, Pulling 3-5 Hours Twisting, Turning 2-4 Hours Climbing Ladders, Stairs 2-4 Hours Lifting, Carrying without Assistance (Maximum) 50 Pounds TRAVEL: • General knowledge of construction activities., • Ability to work with hands and use construction tools., • Ability to take instruction., • Willingness and ability to work nights and overtime on an as-needed basis., • Must have reliable transportation, • Must have a valid driver's license., • Industrial experience, including carpentry/woodworking, auto mechanics, or machinery. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION The Machine Operator will be responsible for performing various tasks to set up, operate, monitor, troubleshoot and perform preventive maintenance on assigned machines. The Machine Operator will also be responsible for inspecting parts to specifications and making adjustments, or tool changes as necessary to maintain quality specifications. Key Deliverables • Set up and operate a production machine in accordance with Astec's guidelines., • Control and adjust machine settings to complete tasks accurately., • Perform pre-operation activities to ensure proper equipment startup and operation., • Accurately perform task based on blueprints provided., • Knowledgeable in basic machine safety to include proper lifting techniques., • Basic blueprint reading and math skills (basic geometry to figure angles) and decimals and metric conversions., • Knowledgeable and able to use tape measure, combination square, levels and radius boards, etc., • Able to safely use hand tools to include hammer, adjustable wrench, air grinder, pencil grinder, and air wrenches., • Closely monitor machine while in operation, never leaving immediate work area while machine is in operation and be ready to respond to breakdowns quickly in order to shut down machine., • Be able to read cut lists (basic reading skills and knowledge of materials – types of steel)., • Able to safely operate cranes and forklifts., • Be able to do some layout work., • Review operator manual(s) for saw, drill, and mill for safe and appropriate operation (to include preventive maintenance)., • Communicate with other machine operators and team members to guarantee safety on the floor., • Keep work area neat and clean., • Must follow all Astec, Inc. safety rules and requirements., • High School Diploma or General Education Degree (GED) preferred., • Relevant trade school or college course work desired., • Blueprint reading skills desired., • 0-2 Heavy equipment manufacturing experience desired., • Computer experience desired, particularly the ability to use a mouse, and locate and open/close files., • Ability to follow verbal instruction and learn how to operate machine, training will be provided., • Must have good written and oral communication skills. None Our Culture and Values Employees that become part of Astec embody the values below throughout their work: • Continuous devotion to meeting the needs of our customers, • Honesty and integrity in all aspects of business, • Respect for all individuals, • Preserving entrepreneurial spirit and innovation Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

Job Description OUR VISION: "To become an indispensable partner to building owners with mission-critical systems." POSITION SUMMARY/OBJECTIVE: The incumbent fabricates, assembles, installs, and repairs sheet metal products and equipment. S/he may occasionally oversee and direct the work of a small group of laborers. Base hourly rate of $30.00 - $32.00 per hour KEY TASKS & RESPONSIBILITIES: • Shears, forms, handles, bends, and welds thin sheet metal during the fabrication process., • Operates shears, plasma machines, press brakes, welding machines, and other various hand tools., • Loads and unloads trucks of material to be staged and installed throughout the jobsite., • Hangs steel supports from ceiling joists and concrete slabs to hold ducts in place., • Measures and marks dimensions and reference lines on metal sheets., • Drills holes in metal for screws, bolts, and rivets. Installs metal ducts with supportive frameworks., • Fabricates or alters parts at construction sites on an as-needed basis., • Fastens seams and joints by welding, bolting, or riveting., • Reviews blueprints and specifications to determine work sequence and effective, safe procedures., • Completes all AHA’s and daily huddles, and pre-plans work to ensure safety, productivity, and quality., • Inspects equipment, structures, and materials to identify the cause of errors, safety hazards, or other issues, and solutions or escalates them appropriately., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • This position operates primarily in the field. Jobsite work is likely to entail varying exposure to weather, potentially harmful materials or chemicals, fumes, odors, noise, dangerous machinery, and/or other conditions typically associated with a live construction site. (Approximations on a daily basis) Standing, Walking 4-6 Hours Sitting 1-2 Hours Reaching Above Shoulder Height 2-4 Hours Working with Body Bent at Waist 2-4 Hours Working with Arms Extended at Shoulder Level 1-2 Hours Kneeling, Crawling, Squatting 1-2 Hours Hand Tool Manipulation 2-3 Hours Pushing, Pulling 1-2 Hours Twisting, Turning 2-4 Hours Driving Commercial Vehicle 1-2 Hours Climbing Ladders, Stairs 1-2 Hours Lifting, Carrying without Assistance (Maximum) 50 Pounds TRAVEL: • Graduation from high school, vocational school, or training equivalent., • 5-8 years of mechanical contracting experience., • Ability to work from blueprints, sketches, and oral instructions under limited supervision., • Must be construction-document and drawing literate, with knowledge of all phases of construction., • Demonstrated knowledge of the methods, practices, techniques, tools, and equipment employed in the joining, jointing, cutting, bending, threading of all types of HVAC piping., • General knowledge of the hazards of the trade and necessary precautionary measures., • Willingness and ability to work nights and overtime on an as-needed basis., • Capacity to leverage leadership skills to facilitate learning, teamwork, and collaborative relationships., • Must have a valid driver's license., • Rigging and Signaling Certification., • Forklift Certification., • Aerial and Scissor Lift Certification., • Completed OSHA 30-Hour Training., • Current First Aid/CPR Certification. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Job Description OUR VISION: "To become an indispensable partner to building owners with mission-critical systems." POSITION SUMMARY/OBJECTIVE: The incumbent fabricates, assembles, installs, and repairs sheet metal products and equipment. Base hourly rate of $22/hr - $25/hr KEY TASKS & RESPONSIBILITIES: • Shears, forms, handles, bends, and welds thin sheet metal during the fabrication process., • Operates shears, plasma machines, press brakes, welding machines, and other various hand tools., • Loads and unloads trucks of material to be staged and installed throughout the jobsite., • Hangs steel supports from ceiling joists and concrete slabs to hold ducts in place., • Measures and marks dimensions and reference lines on metal sheets., • Drills holes in metal for screws, bolts, and rivets. Installs metal ducts with supportive frameworks., • Fabricates or alters parts at construction sites on an as-needed basis., • Fastens seams and joints by welding, bolting, or riveting., • Reviews blueprints and specifications to determine work sequence and effective, safe procedures., • Completes all AHA’s and daily huddles, and pre-plans work to ensure safety, productivity, and quality., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • This position operates primarily in the field installing, maintaining, and repairing and HVAC systems. Jobsite work is likely to entail varying exposure to weather, potentially harmful materials or chemicals, fumes, odors, noise, dangerous machinery, and/or other conditions typically associated with a live construction site. (Approximations on a daily basis) Standing, Walking 4-6 Hours Sitting 1-2 Hours Reaching Above Shoulder Height 2-4 Hours Working with Body Bent at Waist 2-4 Hours Working with Arms Extended at Shoulder Level 1-2 Hours Kneeling, Crawling, Squatting 1-2 Hours Hand Tool Manipulation 2-3 Hours Pushing, Pulling 1-2 Hours Twisting, Turning 2-4 Hours Driving Commercial Vehicle 1-2 Hours Climbing Ladders, Stairs 1-2 Hours Lifting, Carrying without Assistance (Maximum) 50 Pounds TRAVEL: • 0-4 years of mechanical contracting experience., • General knowledge of HVAC systems., • Capacity to facilitate teamwork and collaborative relationships., • Willingness and ability to work nights and overtime on an as-needed basis., • Must have a valid driver's license., • Rigging and Signaling Certification., • Forklift Certification., • Aerial and Scissor Lift Certification., • First Aid & CPR This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION The Machine Operator will be responsible for performing various tasks to set up, operate, monitor, troubleshoot and perform preventive maintenance on assigned machines. The Machine Operator will also be responsible for inspecting parts to specifications and making adjustments, or tool changes as necessary to maintain quality specifications. Key Deliverables · Set up and operate a production machine in accordance with Astec’s guidelines. · Control and adjust machine settings to complete tasks accurately. · Perform pre-operation activities to ensure proper equipment startup and operation. · Accurately perform task based on blueprints provided. · Maintain a detailed activity log of daily duties. Key Activities & Responsibilities · Knowledgeable in basic machine safety to include proper lifting techniques. · Basic blueprint reading and math skills (basic geometry to figure angles) and decimals and metric conversions. · Knowledgeable and able to use tape measure, combination square, levels and radius boards, etc. · Able to safely use hand tools to include hammer, adjustable wrench, air grinder, pencil grinder, and air wrenches. · Closely monitor machine while in operation, never leaving immediate work area while machine is in operation and be ready to respond to breakdowns quickly in order to shut down machine. · Be able to read cut lists (basic reading skills and knowledge of materials – types of steel Able to safely operate cranes and forklifts. · Be able to do some layout work. · Review operator manual(s) for saw, drill, and mill for safe and appropriate operation (to include preventive maintenance). · Communicate with other machine operators and team members to guarantee safety on the floor. · Keep work area neat and clean. · Must follow all Astec, Inc. safety rules and requirements. · Must follow all company policy requirements. To be successful in this role, your experience and competencies are: · High School Diploma or General Education Degree (GED) preferred. · Relevant trade school or college course work desired. · Blueprint reading skills desired. · 0-2 Heavy equipment manufacturing experience desired. · Computer experience desired, particularly the ability to use a mouse, and locate and open/close files. · Ability to follow verbal instruction and learn how to operate machine, training will be provided. · Must have good written and oral communication skills. · Must have good troubleshooting skills, be able to maintain quality, and diagnose cutting problems. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT At Astec, we believe in the power of connection and the importance of building long-lasting relationships with our employees, customers and the communities we call home. With a team more than 4,000 strong, our employees are our #1 advantage. We invest in skills training and provide opportunities for career development to help you grow along with the business. We offer programs that support physical safety, as well as benefits and resources to enhance total health and wellbeing, so you can be your best at work and at home. Our equipment is used to build the roads and infrastructure that connects us to each other and to the goods and services we use. We are an industry leader known for delivering innovative solutions that create value for our customers. As our industry evolves, we are using new technology and data like never before. We’re looking for creative problem solvers to build the future with us. Connect with us today and build your career at Astec. ABOUT THE POSITION We are seeking a skilled and certified Electrician to join our heavy equipment manufacturing team. This role will focus on the electrical installation and testing of advanced control systems, including controllers, sensors, displays, wire cables, and harnesses. The ideal candidate will be adept at both precision installation and troubleshooting to ensure reliable operation of control systems in complex heavy equipment assemblies. Deliverables & Responsibilities Electrical Installation • Install electrical control systems, including programmable controllers, operator displays, sensors, actuators, and harnesses, according to engineering specifications and schematics., • Route and terminate wiring harnesses and cable assemblies with attention to proper shielding, sealing, and mechanical protection in a heavy equipment environment., • Ensure correct electrical connections, grounding, and system integration with hydraulic, mechanical, and electronic subsystems., • Apply appropriate torque, sealing, and fastener practices to ensure system reliability in demanding operating environments., • Conduct functional and continuity testing on installed electrical systems to confirm compliance with design standards., • Diagnose and resolve issues encountered during installation or initial testing, including wiring errors, communication faults, signal loss, or grounding problems., • Use diagnostic tools (e.g., multimeters, oscilloscopes, CAN bus analyzers, or proprietary controller software) to identify and correct faults., • Read, interpret, & apply electrical schematics, wiring diagrams, harness prints, & control system layouts., • Accurately record test results, corrective actions, and installation notes in production documentation systems., • Follow all OSHA, NEC, and company safety procedures, including lockout/tagout and safe handling of energized circuits., • Ensure compliance with quality standards and participate in continuous improvement initiatives. To be successful in this role, your experience and competencies are: Education/Certification: • Licensed or certified Electrician (Journeyman or Master Electrician preferred)., • 3+ years of experience in electrical installation or troubleshooting in industrial, automotive, aerospace, or heavy equipment manufacturing environments., • Proficiency with electrical diagnostic tools (multimeters, continuity testers, oscilloscopes)., • Familiarity with PLCs, CAN bus communication, ethernet communications, various field communications protocols and electronic display systems., • Strong problem-solving and critical-thinking abilities., • Excellent communication and teamwork skills for cross-functional collaboration., • High attention to detail and commitment to safety and quality. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success NOTE: This position is responsible for certain internal control responsibilities. These internal control responsibilities are verbally communicated to the incumbent and periodic feedback is provided as it relates to the performance of these internal control responsibilities. WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description Location: Chattanooga, TN | Travel: Yes (overnight required) Join Control Southern’s expert team and help keep critical industrial systems running safely and efficiently. What You’ll Do • Inspect, repair, and maintain a variety of valves (control, safety, relief, gate, globe, check, ball, butterfly, plug) and actuators (pneumatic, hydraulic, electric)., • Perform calibration, testing, and troubleshooting of valves and process instrumentation., • Complete full repair cycle: pre-testing, disassembly, cleaning, machining, lapping, painting, assembly, and final inspection., • Document all repair activities, including cause of failure and parts used., • Provide technical support and communicate with customers on-site and in-shop., • Adhere to National Board VR/UV program guidelines and site-specific safety requirements., • Experience: 1–3 years in valve, pump, or actuator repair (or equivalent training). Welding and machining skills are a plus., • Skills: Strong mechanical aptitude, troubleshooting ability, time management, and teamwork., • Requirements:, • Valid driver’s license and insurability., • Ability to lift up to 44 lbs and work in varied conditions (heat, cold, clean rooms)., • Comfortable with off-hours, weekends, and overtime as needed., • Be part of a safety-first culture with opportunities for growth., • Work on diverse projects at our repair facilities and customer sites. Control Southern helps manufacturing plants in the Southeast run better, faster and smarter through automation and customized valve solutions. We offer on-site consultation, engineering services, top-notch products and business experience. To grow even more, we are seeking candidates with integrity, a drive to excel in engineering, a dedication to customer service and a thirst to innovative in management. Our expertise is backed by Emerson, a leader in global manufacturing and technology. With a team of highly skilled automation professionals developing unique solutions for our clients in power, pulp & paper, life science, chemical, food & beverage, alternative energy and many other process industries, we help the world run more efficiently. Across North America, Emerson strategically partners with local companies to assist with delivery, ensure quality, and maximize lifetime value of all automation assets. This integrated network of twenty-one strategically selected local companies, known as Emerson Impact Partners, offer the tools, services, subject matter experts, local expertise, and technologies within and beyond Emerson’s portfolio to serve valve, automation and reliability needs. As an Emerson Impact Partner for Georgia, Bahamas, the majority of Florida and Alabama, and portions of Tennessee, Control Southern connects customers with world-class solutions, superior technical expertise, and life-cycle services. Equal Opportunity Employer/Protected Veterans/Individuals with DisabilitiesAt Control Southern, we believe that if you live with integrity, success will follow.\r\n\r\nControl Southern helps manufacturing plants in the Southeast run better, faster and smarter through automation and customized valve solutions. We offer on-site consultation, engineering services, top-notch products and business experience.\r\n\r\nTo grow even more, we are seeking candidates with integrity, a drive to excel in engineering, a dedication to customer service and a thirst to innovative in management.\r\n\r\nOur expertise is backed by Emerson, a leader in global manufacturing and technology. With a team of highly skilled automation professionals developing unique solutions for our clients in power, pulp & paper, life science, chemical, food & beverage, alternative energy and many other process industries, we help the world run more efficiently.\r\n\r\nAcross North America, Emerson strategically partners with local companies to assist with delivery, ensure quality, and maximize lifetime value of all automation assets. This integrated network of twenty-one strategically selected local companies, known as Emerson Impact Partners, offer the tools, services, subject matter experts, local expertise, and technologies within and beyond Emerson’s portfolio to serve valve, automation and reliability needs.\r\n\r\nAs an Emerson Impact Partner for Georgia, Bahamas, the majority of Florida and Alabama, and portions of Tennessee, Control Southern connects customers with world-class solutions, superior technical expertise, and life-cycle services.\r\n\r\nEqual Opportunity Employer/Protected Veterans/Individuals with Disabilities

Job Description Move to Clarksville, TN — Industrial Maintenance Technician Relocation Assistance: $3,000 Available Location: Clarksville, Tennessee Pay: $29.15–$33.15/hr to start (with shift premium, full benefits & 401K match) Shift: 5:45 PM – 6:00 AM | 2-2-3 rotating schedule Earning Potential: Up to $36.75/hr within 6–18 months Why Clarksville? Affordable cost of living. Growing industrial market. Strong community. This is a rare opportunity to relocate into a stable, high-tech manufacturing facility with long-term career growth. We offer $3,000 in relocation assistance for qualified candidates ready to make the move. The Opportunity We are hiring Industrial Maintenance Technicians with strong mechanical AND electrical troubleshooting skills to support a highly automated production facility utilizing: • Siemens PLCs, • Robotics & automation, • AGVs What You’ll Do • Troubleshoot and repair mechanical, electrical, hydraulic & pneumatic systems, • Work directly with PLCs (Siemens), automation systems, AGVs & robotics, • Perform preventive, predictive & emergency maintenance, • Read and interpret blueprints, schematics & technical manuals, • Complete light welding & fabrication as needed, • Maintain accurate CMMS documentation, • 1+ year of industrial maintenance experience, • Multi-craft skillset (mechanical + electrical), • Strong troubleshooting & problem-solving abilities, • Ability to work in warm manufacturing environments & lift 50 lbs, • $29.15–$33.15/hr starting pay, • Up to $36.75/hr within 6–18 months, • $3,000 relocation assistance, • 401(k) with company match, • Health, dental, vision & life insurance, • PTO + paid holidaysCompany DescriptionWe work with you to ensure the job fits what you are looking for. We will also help you build an awesome resume.We work with you to ensure the job fits what you are looking for. We will also help you build an awesome resume.

Job Description *This is not a remote position. It is 100% on-site. BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION We are seeking a highly organized and proactive Production Planner to optimize our manufacturing operations. This role is critical in creating and maintaining efficient production schedules, ensuring seamless coordination across our Sales, Engineering, Purchasing, and Manufacturing teams. You will be responsible for capacity planning, setting lead times, and driving our daily schedule updates to maintain a smooth and effective production flow. Key Responsibilities · Develop and manage comprehensive production schedules that balance capacity, lead times, and delivery commitments. · Coordinate material requirements and ensure the timely availability of components and raw materials to support the production plan. · Facilitate cross-functional communication, proactively informing teams of schedule changes and updates · Utilize ERP systems (such as Oracle, Epicor) for work order management, capacity planning, and scheduling. · Identify and implement opportunities for process improvement and workflow optimization, leveraging Lean principles. · Analyze production data, prepare status and performance reports, and communicate key insights to management. · Drive continuous improvement initiatives and contribute to achieving overarching company goals. · Champion Astec’s core values and promote a safety-first culture. To be successful in this role, your experience and competencies are: · Bachelor’s degree in a related field preferred, or an Associate's degree with 2+ years of relevant experience, or 8+ years of experience as a production planner or master scheduler in a manufacturing environment. · Proficiency in ERP systems (experience with Oracle, Epicor or similar preferred), strong computer skills including Microsoft Excel and Power BI. · Proven ability to create and maintain production schedules, plan work orders, set capacities, and manage lead times. · Strong analytical abilities to interpret data, identify potential issues, and develop effective solutions. · Excellent communication skills, both verbal and written, with the ability to effectively collaborate across all departments. · A commitment to continuous learning, process improvement, and embracing change, including the planned introduction of Visual ERP scheduling. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers. · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success. NOTE: This position responsible for certain internal control responsibilities. These internal control responsibilities are verbally communicated to the incumbent and periodic feedback is provided as it relates to the performance of these internal control responsibilities. WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Primarily responsible for creating electrical drawings and associated documents in support of the Electrical Engineering Department. Works with various departments to determine customer requirements for electrical and control components. (This position is not an entry-level position and requires appropriate knowledge and experience.) Key Deliverables · Prepares detailed 3-phase, single-phase and low-voltage DC electrical drawings including electrical bills of material, purchased parts lists, cable routing, and operational notes. · Processes sales orders and work orders. · Interacts with Engineering, Sales, Service to determine/confirm customer requirements · Coordinates with Procurement to ensure long lead time items may be identified and addressed · Assists in determining power requirements, troubleshooting of electrical systems, and aiding in installations and permitting for customers. Key Activities & Responsibilities · Assists in determining power requirements, troubleshooting of electrical systems, and aiding in installations and permitting for customers. · Supports as necessary lending assistance in electrical and controls troubleshooting. · Supports the work order process by attending sales order meetings to gather/confirm electrical design requirements. · Collaborative electrical print checking · Timely and accurate correction/resolution of drawing errors · Engage in Continuous Improvement projects and activities as assigned. To be successful in this role, your experience and competencies are: · Knowledge of the National Electric Code and UL requirements. · Ability to select proper components, size starters, breakers, wiring and conduit. · Ability to read electrical ladder diagrams and mechanical drawings. · Ability to troubleshoot electrical circuits. · Experience with AutoCAD. · Knowledge of PLC’s/No Programming Required. · Associates degree or equivalent knowledge/experience in a related field. · Willingness to travel occasionally and work overtime as needed. Supervisor and Leadership Expectations · No supervisory responsibilities Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success NOTE: This position responsible for certain internal control responsibilities. These internal control responsibilities are verbally communicated to the incumbent and periodic feedback is provided as it relates to the performance of these internal control responsibilities. WORK ENVIRONMENT Office While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop and kneel, or crawl; and talk and hear. The employee frequently is required to stand, walk, and sit. The employee must occasionally move more than 40 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be required to use protective personal equipment for varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under limited supervision, the Electrical Technician must be capable of performing all tasks in Astec manufacturing electrical department with little to no supervision. Must be able to assemble, evaluate, troubleshoot, and correct deficiencies to make certain product specifications are met. Ensure that work is in accordance with relevant codes. This level of electrician will deal with live energized equipment and be trained and capable of performing all required tests and if necessary de-energize equipment to meet safe standards before proceeding. Key Deliverables • Assemble, evaluate, test, and maintain electrical or electronic wiring, equipment, appliances, and apparatus., • Troubleshoot and repair malfunctioning equipment., • Construct and fabricate parts, using hand tools and specifications., • Read and interpret electrical and electrical circuit blueprints and diagrams., • Demonstrate Astec processes in all aspects of the manufacturing electrical department including panel room, construction manufacturing and industrial manufacturing as warranted by workload demands and scheduling needs., • Test and troubleshoot heaters to ensure equipment is ready before shipping to customer site., • Correct and re-test to verify corrective action was successful., • Communicate with electrical engineering recommendations to correct or improve processes., • Monitor quality issues that warrant concern and encourage postponement of equipment from being shipped., • Achieve quality results as it relates to the Company's vision and mission., • Promote and educate others on Astec's core values., • High School Diploma or equivalent and/or accreditation from a technical school or an applicable skilled trades program required., • 2-4 years working in manufacturing in order to understand equipment and process procedures., • Must be detail oriented, good workmanship while taking and following direction with little to no supervision., • Demonstrated track record of working cross-functionally and as a team necessary., • Strong problem-solving skills desired. None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers, • Honesty and integrity in all aspects of business, • Respect for all individuals, • Preserving entrepreneurial spirit and innovation Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status, or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION At Astec, we are building a world class electrical and software engineering team. A team that values free thought for innovative idea generation and disciplined engineering for the realization of those ideas to drive solutions for our customers. By freeing our creative minds, we bring solutions our customers haven’t even realized they need yet. Through disciplined engineering we ensure the solutions we provide are effective, simple to use, reliable, and cost effective. The Controls Software Engineer will be a part of a dynamic team of engineers working on the development of control/automation code for heavy construction equipment, ranging from road pavers, road mills, rock crushers, woodchippers, etc. The engineer will be involved in the creation of product requirements, decomposition to software requirements, structured software decomposition, code development, software design reviews, and software unit and integration testing. The engineer will move from project to project as required and may be working on multiple projects within a given timeframe. All project work will be scheduled by the New Product Development Manager(s) and the Continuous Improvement Manager(s) such that the engineer will not be over allocated but will have definite deadlines and visibility into upcoming work. Software will be developed on PLCs, embedded controllers, and HMI displays. Some legacy systems are coded in Ladder Logic, but all new systems will be coded in either CodeSys or C/C++. The Control Software Engineer will work with the Electrical Engineer(s) on a project to map I/O, define necessary configurations, understand sensor input requirements as well as device output drive requirements. The Control Software Engineer will work cooperatively with the Electrical Engineer(s) and the Mechanical Engineer(s) to develop the appropriate control algorithms to produce the equipment functionality required by the customer and Product Management. The Control Software Engineer will also work with other cross-functional teams, including but not limited to sales, manufacturing, purchasing, and service to ensure the successful completion of projects and launch of equipment. Controls Software Engineer may at times be asked to travel for project testing and system integration testing, as well as to develop business relationships with customers, dealers, and suppliers. They may also participate in product focus groups to gain critical customer application and design suggestions to assist in the development of product lines. ESSENTIAL DUTIES AND RESPONSIBILITIES (may include but not limited to) Use structured systems engineering approach for the development of the software used to control heavy construction equipment. Uses knowledge of process automation techniques to advance the simplicity of operation and troubleshooting of equipment to maximize productivity by enhancing operator functionality and the minimization of equipment downtime. Uses structured software design techniques to distill product requirements into a product software specification, product software design, and product software test plan and creates the corresponding documents. Completes the controller/PLC programming and the HMI screen programming for product projects based on the software design. Performs unit testing and integration testing of all controller/PLC/HMI systems to insure performance and realization of all product requirements. Develops the software test plans for new designs and changes to existing designs, and coordinates the testing and validation using these plans, Contributes to the development of product documentation, including production work instructions, training manuals, troubleshooting guides, and product test plans. Identifies improvement opportunities and enhancements for product enhancements and/or cost reductions. Contributes to project teams to ensure the successful completion of project objectives, including schedule, budget, and feature set. Contributes to the development of new processes and procedures to enhance the software and hardware design capabilities and work products of the engineering team. Leads cross-functional software and HMI design reviews. Leads software design reviews for developed control software. Assists customers, via telephone or on site, to resolve function and/or application issues. Works with the Service Department to resolve field and warranty issues. Works with the Technical Publications Department to develop and update operation/parts/service manuals. Adheres to all Astec design and coding standards. Performs engineering calculations as required during design cycle. Follows proper safety procedures. Performs other duties as assigned. MINIMUM EDUCATION and/or EXPERIENCE REQUIRED Bachelor of Science (B.S.) degree in Electrical / Computer Engineering or related field. Minimum of five (5) years of experience in the design and development of industrial or mobile equipment control software. SKILLS AND ABILITIES REQUIRED Job-related Skills and Abilities Knowledgeable of development software and tools for embedded systems. Proficient in C / C+ / Structure Text programming, preferably in automotive or mobile equipment applications. Knowledgeable of network protocols such as CAN, Ethernet, Wireless 802.11, etc. Proficient at interfacing software with the control and data acquisition from sensor, including pressure, proximity, angular, temperature, etc. Proficient with developing code for the control of valves, motors, and other industrial devices. Ability to work satisfactorily as a team member. Good communication skills (both verbal and written). Good organization and time-management skills. Willingness to accept responsibility and take on new challenges. Ability to exercise discretion and independent judgment on a customary and regular basis. Proficiency with personal computer and Microsoft Office Suite software applications. Adept at problem solving. Language Skills Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Ability to write routine reports, correspondence, and effectively present information to customers and/or employees of organization and respond to questions from groups of managers, clients, customers, and the public. Reasoning Ability Skills Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must have strong analytical and troubleshooting skills. OTHER REQUIREMENTS Pre-employment drug screen, physical (if required), and background check. Flexibility to work additional hours as required. Occasional travel (including international). Valid driver's license and ability to safely operate a motor vehicle. PREFERENCES Experience with CodeSys, C/C++, and Ladder Logic programming. Experience developing software/firmware controls for and interfaces to Telematics, hydraulic circuits, 12V/24V DC electric circuits, A/C motors, and/or control systems for off-road construction equipment. Experience in the design and creation of software for the control & automation of off-road construction equipment. SAFETY Astec is dedicated to a culture of Behavior Based SAFETY and a Healthy Environment! Proficient in promoting safe and healthy work environment. Notify area supervisor of product discrepancies or equipment malfunctions. Adhere to established company policies and procedures paying special attention to safety regulations. Report defective materials, equipment, or questionable conditions to the area supervisor/manager to identify and correct the root cause. Wear personal protective equipment (PPE) in accordance with training guidelines. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to remain in a stationary position a minimum of 50% of the time, move and frequently operate a computer and other office equipment and occasionally properly employ objects, tools and/or controls. The employee is frequently required to communicate and exchange accurate information. The employee is regularly required to reach and occasionally attain non-standard physical positions for varying amounts of time. Specific vision abilities include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. The employee must regularly transport up to 10 pounds and occasionally transport up to 25 pounds. Lifting devices must be used or help must be requested for anything over 25 pounds. Required to occasionally ascend/descend, balance and work at various heights. Ability to travel by land and/or air for extended periods of time. Specific vision abilities required by this job include close, distance, color, and peripheral vision, depth perception, and ability to adjust focus. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. Continuous devotion to meeting the needs of our customers. Honesty and integrity in all aspects of business. Respect for all individuals. Preserving entrepreneurial spirit and innovation. Safety, quality, and productivity as means to ensure success. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to a climate-controlled office environment and is occasionally exposed to a shop manufacturing environment. Office environment exposures include frequent and extensive telephone and computer use. The noise level in the office setting is usually moderate consistent with an office environment. Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Mines, road construction and forestry job site exposures include exposure to climate conditions indicative of the geographic location and the season. Field duties require that the employee work in close proximity to heavy roadbuilding and construction equipment (dump trucks, loaders, cranes, crushers, pavers, cold planers, material transfer vehicles, stabilizers, wheel loaders, excavators, skidders, feller buncher, chippers, grinders etc.) and traffic associated with mines, road construction, forestry and recycling sites. The employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to high, precarious places, toxic or caustic chemicals, vibration, and risk of electrical shock. The noise level in this environment is usually loud and may require hearing protection. The employee is occasionally exposed to travel hazards associated with automobile and/or airplane travel. Equal Opportunity Employer As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or exe

Job DescriptionStep Into a Day on Our Shop Floor It’s early in Chattanooga, TN, and the first job ticket hits your bench. You scan the engineering drawing, confirm specs, and set up the lathe to prep a worn shaft for coating. Using indicators and micrometers, you confirm dimensions and runout, mask critical areas, and head to blasting. After surface prep, you help apply a high-performance coating (plasma, HVOF, or chrome), then finish it to the specified surface roughness—sometimes all the way to a mirror polish. You record your work in our systems, move the part safely with a hoist, and leave your station clean and organized for the next job. About Industrial Plating Company Since 1963, Industrial Plating Company has applied high-performance coatings and remanufactured industrial components to boost equipment reliability and output quality. Our work helps Fortune 1000 manufacturers reduce operating costs and keep critical assets running. The Role We’re hiring a Mechanical Surface Restoration Technician to learn and perform the preparation, application, and finishing of industrial coatings across diverse components. You’ll be cross-trained on machining, grinding, dynamic balancing, chrome plating, thermal spray technologies, and more. What You’ll Do • Interpret engineering drawings and written work instructions to plan and execute jobs correctly., • Verify critical characteristics (thickness, dimensional features, TIR, surface roughness) using precision tools., • Mask components with appropriate materials to protect features during coating., • Keep a tidy, well-organized work area and participate in regular safety training., • Operate forklifts, hoists, and related positioning equipment safely., • Run machine tools (manual lathes, cylindrical/OD-ID grinders), sandblasting, coating, polishing, and buffing equipment., • Perform basic operator-level maintenance on assigned equipment., • Use software and spreadsheets to document work performed and ensure repair accuracy.Hands-On Training You’ll Receive, • Advanced use of precision metrology: dial indicators, micrometers, pi tape, thickness gauges, surface profilometers., • Surface preparation: visual inspection and abrasive blasting for coating readiness., • Coating technologies: plasma, HVOF, twin wire arc, and plating rectifiers., • Finishing: polishing methods to achieve specified Ra, including mirror finishes., • Machining: manual lathe work, cylindrical grinding, use of positioners and additional shop tools., • Troubleshooting: identifying issues in rotating equipment components.What Sets Strong Candidates Apart, • Natural mechanical curiosity—eager to understand how things work., • Enjoys hands-on work and variety; stays sharp in a fast-paced environment., • Committed to doing it right the first time; thrives on learning every role in the process.Preferred (Not Required) Experience, • Manual machining (lathes, mills, cylindrical grinders)., • Safe use of cranes and hoists., • MIG, TIG, or stick welding experience.Personal Skills, • Collaborative team player who can also work independently., • Ability to manage productivity and quality to meet customer requirements., • Root-cause problem solver who treats problems as opportunities., • Mechanical aptitude and basic computer/data entry skills (production and quality).Education & Background, • High school diploma or GED required., • Technical certificate/degree is a plus., • 401(k), • Health, Dental, Vision insurance, • Life insurance, • Paid time offSchedule, • Weekend shift: 5am-5pm Friday, Saturday, and Sunday. Initial training will be completed Monday-Friday 5am-1:30pm., • Weekday shift: 5am-1:30pm Monday-Friday., • Quality inspection experience, • Mechanical troubleshooting, • Manual machiningMachines & Technologies You’ll Use, • MIG and TIG welders, • Manual lathe, • Cylindrical grinder and OD/ID grinding machines

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION This critical position is responsible for overseeing the planning and coordination of Astec’s inventory and materials department in one of Astec’s primary manufacturing sites in North America. This position will work closely with internal operations customers and requires an excellent communicator with strong attention to detail and problem-solving skills. To excel in this role, a materials manager must have in-depth knowledge of supply chain, budgeting processes and must be a change agent. Ultimately ensures all departments have adequate access to the materials that are needed to execute the master schedule. Executes the organization's overall supply chain vision, policies, objectives, and initiatives. Oversees the organization's operational procurement, inventory, warehousing, and transportation functions. Key driver for aftermarket order fulfillment performance. Actively participates in, as well as directs and coordinates, the activities of personnel engaged in the distribution of raw materials and some finished goods in the organization. Ensures compliance with all applicable requirements and specifications in accordance with company policies, principles, and procedures by performing the following duties personally or through subordinates. • Drive operational excellence in supply chain capabilities through execution of the 5-year strategic roadmap., • Supports procurement cost savings initiatives through tactical negotiations and alignment with corporate procurement sourcing strategies., • Achieve and strategic objectives for inventory levels and turns while minimizing stockouts., • Facilitates, Manages and Oversees best in class inventory control processes, maintaining a fully effective cycle count program with a net $ accuracy above 99%., • Lead initiatives to ensure at least 95% Fill Rate and 99% On Time Delivery for aftermarket sales. · Coordinate the implementation of best-in-class materials management processes, coaching, mentoring, and training local Teams to achieve highest standards of operational efficiency • Oversee the material control, storage, transportation, and delivery of all company raw materials, purchased items and internally fabricated products., • Track key metrics and measure to gauge the success of the function., • Responsible for leading a team to place orders within lead time, expedite if necessary to meet on time delivery expectations minimizing disruption to manufacturing., • Assimilate, report and speak regularly to management and others about shortages and process improvements., • Work closely with the Operational Leads (Tactical Buyer) and Material Planning organization to ensure alignment and effective execution of the master schedule To be successful in this role, your experience and competencies are: · BS or BA degree required and Advanced University Degree (Master’s Degree or equivalent) preferred in Procurement, Supply Chain Management, Finance, or related field. · ASCM or APICS certification as CSCP, CPIM, CLTD, ISM certification, desired · 5+ years’ progressive experience in Materials Management, preferably for large global/multinational, process driven companies, building and optimizing programs across diverse teams and cultures · Demonstrated leadership capabilities · Ability to work within a global matrix organization · Manufacturing operations experience preferred · Oracle ERP use and expertise preferred Supervisor and Leadership Expectations Directly manages 5-10 direct reports ranging from cycle counters, material coordinators and buyer/planners. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success NOTE: This position responsible for certain internal control responsibilities. These internal control responsibilities are verbally communicated to the incumbent and periodic feedback is provided as it relates to the performance of these internal control responsibilities. WORK ENVIRONMENT Office While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job DescriptionDescription: PRIMARY FUNCTION: The Manufacturing Engineer is responsible for developing, evaluating, and improving manufacturing methods to achieve improved quality, product cost, and manufacturing efficiency. This position applies knowledge of design, materials/components, fabrication, welding and paint processes, tooling and production equipment capabilities, assembly methods and quality standards. RESPONSIBILITIES: Candidate will use skills acquired through formal training/education to execute the following and related tasks in support of product development and management responsibilities. • Create and improve upon production standard work practices for the equipment assembly department, • Lead troubleshooting of mechanical, electrical, or hydraulic issues on Sherman+Reilly product within the production environment, • Support engineering team with new product introductions into the production environment, • Design and develop equipment, processes, and shop layout for maximum efficiency and flow., • Partner with quality department and shop floor in quality improvements through root cause analysis and problem resolution., • Recommend ways to reduce product costs and improve functionality. Actively work with design engineers and product line teams to implement design and manufacturing changes., • Ensure all changes are made consistent with ergonomic and other safety standards., • Train employees as needed. Bachelor’s degree in Manufacturing Engineering or an equivalent field of Engineering. 3-5 years of experience within a manufacturing environment Experience or education in electrical or hydraulic system troubleshooting required Hydraulics, Pneumatics, or Electrical Systems certifications preferred Ability to read electrical and hydraulic system schematics Ability to read and understand design drawings with geometric dimensioning and tolerance (GD&T). Strong computer skills (Excel, Word, CAD software, SolidWorks, ERP/MRP system). Effective communication/interpersonal skills are required. PHYSICAL: This position may exert up to 35 pounds of force occasionally with assistance, and/or up to 10 pounds of force frequently as well as the use of arm and/or leg controls with exertion greater than that of sedentary work. May also push, pull, lift, carry, grasp, finger or otherwise move objects Normally assigned to a production environment Uses computer terminal frequently; interfaces with other employees and outside visitors by e-mail, telephone, mail and/or in person. Is required to wear safety glasses, ear protection, and safety shoes within the factory environment. Must be able to climb onto and under mobile equipment to access mechanical and electrical components. Notice to Recruiting Agencies: Sherman + Reilly does not accept unsolicited resumes or inquiries from staffing or recruiting agencies. We will not review, respond to, or return cold calls or unsolicited outreach. Any resumes submitted without a signed agreement in place will be considered the property of Sherman + Reilly and will not be subject to any placement fees.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under general supervision execute projects that require the creation and evaluation of original design. Participate in the analysis and validation of design and theoretical concepts, working from and adapting a wide range of established research techniques. Key Deliverables · Create accurate project specifications. · Ensure all engineering documents are up to date. · Develop standard work templates and revision control processes. · Assist in design, development, implementation and analysis of technical products and systems. · Drives continuous improvement by managing projects and recommending techniques to enhance equipment/system/process robustness Key Activities & Responsibilities · Initiate and execute the Product Design and Development (PDD) process to ensure product definitions and specifications are met by all stakeholders. · Participate and contribute to product design meetings including product specifications, material selection, 3D CAD models, and detailed 2D drawings. · Collaborate as a member of cross-functional project teams from concept to testing, and ultimately to production. · Conduct design for manufacture assessments involving manufacturing expertise to ensure that final design will support lean manufacturing principles, build quantity, cost, and performance requirements. · Develop design concepts to meet cost objectives and, interface with vendors and suppliers to locate and approve components. · Administer design history and practice proper engineering document control processes to ensure drawings are up to date. · Work toward identifying commonality in design to assist with manufacturing standardization. · Demonstrate technical and written skills via generating and filing reports of design analyses for future reference and demonstrate interpersonal skills via preparing and presenting findings. · Provide timely response to Root Cause Analysis and Corrective action requests related to design issues and/or warranty problems to support the engineering solution applied in the field. · Assist peers with workloads as needed for total project completion by management expectations or production deadlines. · Proficient in promoting a safe and healthy work environment. · Adheres to established company policies and procedures paying special attention to safety regulations. · Wears personal protective equipment in accordance with training guidelines. · Maintain cleanliness in designated workspace by practicing 6S principles to reduce safety risks. To be successful in this role, your experience and competencies are: · A bachelor’s degree required in, Mechanical Engineering, Electrical Engineering, a related field or equivalent and/or combination of training and experience. · 6+ Years of Engineering experience required. · Maintain positive, collaborative working relationships by engaging with various personalities including customers, vendors, co-workers, and management while working both individually and as part of a team. · Must be able to take on more complex and advanced engineering projects while balancing project management responsibilities. · Proven ability to influence, lead teams, and drive change. · Skill in working efficiently and accurately to keep up with engineering, sales, and production requirements. · Flexible and adaptable in prioritizing workloads, coping with pressure, deadlines, and rapidly changing situations. · Proven results with creation and maintenance of engineering design standards and drawing standards. · Ability to attract and retain engineering talent. · Customer-oriented, with the ability to represent Peterson engineering ideas, and designs to non-technical audiences. · Extensive cross functional team experience including technical and non-technical work. · Proficient in a combination of the following software packages, or equivalent: MS Office Suite (e.g., Excel, Word, Outlook, and Dynamics AX), AutoDesk Design Suite ( e.g. AutoCAD, Inventor, Nastran In-CAD, 3DS Max, and AutoCAD Electrical), · Detail-oriented with excellent written and verbal communication skills. · Must be a creative thinker, results-oriented, analytical mindset, and a focused problem-solver. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description ABOUT THE POSITION The Production Planner will create and maintain manufacturing schedules for given product line(s), work with sales, engineering, purchasing, and manufacturing to maintain a production plan. The Production Planner will do capacity planning, set lead times, and maintain all aspects of the facility schedule. The production planner will lead production meetings and daily schedule update meetings to effectively communicate and plan the facility. Key Deliverables · Schedule production to ensure optimal production levels. · Produce reports based on findings and performance of production. · Manage product line(s) based on customer delivery dates. · Determine manpower, equipment, and raw materials need to cover production demand. · Prepare and submit status and performance reports. Key Activities & Responsibilities · Create and maintain all production schedules for product line(s) that fall under your responsibility. · Plan all work orders, maintain fabrication and assembly workload, and meet customer delivery dates. · Work with all departments to maintain required information and work to keep everyone informed of schedule additions and changes. · Reference master schedule to establish production release sequence and lead time of each operation to meet shipping dates according to sales forecasts or customer orders. · Analyzes production specifications and plant capacity data and performs mathematical calculations to determine manufacturing requirements. · Experience with Oracle Fusion or similar ERP system preferred. · Detail oriented with good organizational skills. · Willingness and aptitude to implement and improve upon an Oracle Fusion ERP system implementation. · Continually seek ways to improve processes and workflow to drive positive change. · Update job knowledge by participating in educational opportunities. · Accomplish department and company mission by achieving set goals. · Promote and educate others on Astec’s core values. · Follow company policies, procedures, and safety rules at all times. To be successful in this role, your experience and competencies are: · Associate’s degree or equivalent from an accredited college or technical school preferred or 3 to 5 years of experience as a production planner or master scheduler in a manufacturing environment. · Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers, and management. · Willingness to utilize lean knowledge tools to identify and assist with continuous improvement. · This position will require strong communication skills, along with strong computer skills including Microsoft Excel, Access, and ERP system knowledge is preferred. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers. · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success. NOTE: This position responsible for certain internal control responsibilities. These internal control responsibilities are verbally communicated to the incumbent and periodic feedback is provided as it relates to the performance of these internal control responsibilities. WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under supervision, the Electrical Technician must be capable of performing all tasks in Astec manufacturing electrical department. Must be able to assemble, evaluate, troubleshoot and correct deficiencies to make certain product specifications are met. Ensure that work is in accordance with relevant codes. This level of electrician will deal with live energized equipment and be trained and capable of performing all required tests and if necessary de-energize equipment to meet safe standards before proceeding. Key Deliverables · Assemble, evaluate, test, and maintain electrical or electronic wiring, equipment, appliances, and apparatus. · Troubleshoot and repair malfunctioning equipment. · Construct and fabricate parts, using hand tools and specifications. · Read and interpret electrical and electrical circuit blueprints and diagrams. · Perform preventative maintenance on a regular schedule. Key Activities & Responsibilities · Demonstrate Astec processes in all aspects of the manufacturing electrical department including panel room, construction manufacturing and industrial manufacturing as warranted by workload demands and scheduling needs. · Test and troubleshoot heaters to ensure equipment is ready before shipping to customer site · Correct and re-test to verify corrective action was successful · Communicate with electrical engineering recommendations to correct or improve processes · Monitor quality issues that warrant concern and encourage postponement of equipment from being shipped · Achieve quality results as it relates to the Company’s vision and mission · Promote and educate others on Astec’s core values · Follow company policies, procedures, and safety rules at all times To be successful in this role, your experience and competencies are: · High School Diploma or equivalent and/or accreditation from a technical school or an applicable skilled trades program required. · 0-2 years working in manufacturing in order to understand equipment and process procedures · Must be detail oriented, good workmanship while taking and following direction with little to no supervision. · Demonstrated track record of working cross-functionally and as a team necessary. · Strong problem-solving skills desired. · Recognition that at every level growing experience in troubleshooting is essential to evaluate and correct concerns before testing. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT At Astec, we believe in the power of connection and the importance of building long-lasting relationships with our employees, customers and the communities we call home. With a team of more than 4,300 strong, our employees are our #1 advantage. We invest in skills training and provide opportunities for career development to help you grow along with the business. We offer programs that support physical safety, as well as benefits and resources to enhance total health and wellbeing, so you can be your best at work and at home. Our equipment is used to build the roads and infrastructure that connects us to each other and to the goods and services we use. We are an industry leader known for delivering innovative solutions that create value for our customers. As our industry evolves, we are using new technology and data like never before. We’re looking for creative problem solvers to build the future with us. Connect with us today and build your career at Astec. LOCATION: This is an onsite position at our Roadtec facility in Chattanooga, TN. Corporate relocation assistance is available. ABOUT THE POSITION The Reliability Engineer plays a critical role in ensuring the consistent performance and optimal operating cost of equipment and systems. This position focuses on identifying and mitigating risks of failure, improving product reliability, and optimizing maintenance strategies. By applying engineering principles, data analysis, and reliability tools, the reliability engineer supports operational efficiency, safety, and cost-effectiveness. Collaboration with cross-functional teams is essential to drive continuous improvement and implement solutions that enhance system uptime and performance. New Product Development is a key area where the reliability engineer will add value. Focusing the team on reliability during the early stages of design and developing reliability centered maintenance strategies is essential for successful new product launches. KEY DELIVERABLES · Reliability Strategy & Roadmap Development of long-term plans to improve asset reliability and reduce downtime · Design Failure Mode and Effects Analysis (DFMEA) Documentation and analysis of potential failure modes and their impact on customer operations throughout the NPD cycle as well as the asset life cycle · Root Cause Analysis (RCA) Reports Investigations and reports detailing the underlying causes of failures and recommended corrective actions · Reliability Metrics & Dashboards Creation and maintenance of KPIs such as MTBF, MTTR, and machine utilization · Maintenance strategies Design and optimization of maintenance strategies based on equipment condition and performance data including Preventive & Predictive schedules, daily, weekly and monthly inspection schedules · Life Cycle Cost Analysis Assessment of total cost of ownership to guide investment and replacement decisions, integrated into the NPD cycle as part of the design reviews · Risk Assessments Identification and quantification of reliability-related risks to safety, performance, and cost · Training & Knowledge Sharing Development of training materials and sessions to promote best practices for reliability across Astec service teams and customer maintenance personnel · Continuous Improvement Initiatives Create a culture of continuous improvement by implementing projects aimed at reducing failures and improving system performance KEY ACTIVITIES · Conduct Reliability Assessments Evaluate equipment and system performance using reliability engineering principles · Perform Root Cause Analysis (RCA) Investigate failures to identify underlying causes and recommend corrective actions · Develop and Maintain DFMEAs Analyze potential failure modes and their effects to prioritize mitigation strategies · Implement Predictive Maintenance Programs Use condition monitoring tools (e.g., vibration analysis, thermography) to anticipate failures · Analyze Reliability Data Use statistical tools to calculate metrics like MTBF, MTTR, and failure rates · Support Asset Management Contribute to lifecycle planning, machine criticality ranking, and replacement strategies, driving towards latest technologies in close collaboration with the Advanced Technology Group · Collaborate with Cross-Functional Teams Work with operations, service, customer maintenance, and engineering to improve system reliability · Lead Reliability Improvement Projects Drive initiatives aimed at reducing downtime and increasing equipment availability KEY RESPONSIBILITIES · Ensure Equipment Reliability Maintain high levels of operational uptime and performance · Drive Continuous Improvement Identify and implement opportunities to enhance reliability and reduce costs · Latest technology Stay close to latest technological developments in the industry to improve reliability · Maintain Compliance Ensure reliability practices meet industry standards and regulatory requirements · Report Reliability Metrics Provide regular updates on reliability KPIs to stakeholders and leadership · Train and Mentor Staff Share reliability knowledge and best practices with maintenance and engineering teams · Support Safety Initiatives Ensure reliability efforts contribute to safe operations and hazard mitigation To be successful in this role, your experience and competencies are: · A bachelor’s degree required in Mechanical Engineering, Electrical Engineering, a related field or equivalent and/or combination of training and experience required · 6+ Years of Engineering experience required · Qualified in Design for Six Sigma (DFSS) or equivalent preferred · Proven track record of deploying preventive and predictive maintenance strategies · Familiarity with tools like DFMEA, RCA, CMMS, RCM, and reliability modeling platforms · Experience leading cross-functional reliability improvement initiatives · Experience analyzing failure data and presenting reliability metrics to stakeholders · History of working with operations, maintenance, engineering, and safety teams · Experience ensuring reliability practices align with industry standards and regulations · Strong understanding of engineering principles, asset management, and maintenance strategies · Ability to interpret complex data and identify trends, risks, and opportunities · Skilled in diagnosing issues and implementing effective, sustainable solutions · Capable of translating technical findings into actionable insights for diverse audiences · Focused on driving efficiency, reducing downtime, and enhancing system performance · Competent in using statistical methods to predict failures and optimize maintenance · Strong understanding of how reliability impacts operational safety and risk management · Proficient in a combination of the following software packages, or equivalent: MS Office Suite (e.g., Excel, Word, Outlook, PowerPoint), SolidWorks 3D CAD, Oracle Cloud ERP · Detail-oriented with excellent written and verbal communication skills Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION The Director of Manufacturing will lead manufacturing activities while executing strategic initiatives and coordinating resources to fabricate, paint, and assemble heaters, tanks, piping, and accessories. The Director of Manufacturing will provide oversight to management and operations staff with the primary goal being to ensure a work environment that promotes safety, quality, and productivity while driving continuous improvement activities. Key Deliverables · Responsible for all manufacturing operations including the safety, production efficiencies, quality, and customer service. · Leads team members by managing and executing plant processes. · Supports continuous improvement processes to ensure safety, quality, goals are cost, and customer service are met. · Creates and maintains an engaged and team-oriented workforce to meet business demand. · Comply with all of Astec’s safety protocols. Key Activities & Responsibilities · Manage the manufacturing facility by ensuring all safety, quality, delivery, and financial goals and standards are consistently met · Ensure a healthy and safe working environment while complying with federal and state regulations through active collaboration with environmental, health, and safety (EHS) staff · Lead the manufacturing organization to build a strong culture of employee engagement and involvement, productivity, and accountability · Assist general manager with long-range operational goals, expansion efforts, and implementation of new and advanced technology to drive improvement and reduce costs in our products · Organize departmental management structure and teams for optimal, efficient operations · Work with company controller to develop operating budgets and meet targets for efficiency, costs, hours, and absorption. · Participate in the S&OP (Sales and Operation Planning) process with other site managers to understand the business conditions and make manpower and continuous improvement decisions to support the operation · Create and deliver progress and production reports to executive team members on a regular basis · Work with Operational Excellence staff to drive fact and data based continuous improvement, introduce new technology, new processes, SQDC initiatives, reduce man-hours, improve lead times and product flow, etc. · Supervise capital planning for the facility, including equipment research and specification requirements, quoting, and purchasing along with maintenance, and facility layout · Identify current and future training opportunities to build staff skills and support succession planning efforts · Lead efforts towards standard costing, with an understanding of shop labor routings, standards, etc. · Work cross-functionally and collaboratively with other departments to meet Astec’s strategic objectives · Maintain a working knowledge of current trends and practices in welding, fabricating, cutting, painting, assembly and electrical to make sure the business stays current to new technologies · Assume other special activities and responsibilities as directed · Actively support Astec’s core values, mission statement and vision statement · Follow Affirmative Action and Equal Employment Opportunity program guidelines at all times · Follow proper safety procedures at all times · Wears personal protective equipment as required To be successful in this role, your experience and competencies are: · BS/BA Degree in an Engineering discipline preferred (ME, IE, etc.). BS/BA Degree in Business Management, Finance, or other related field plus applicable experience is acceptable. · 10+ years of manufacturing related experience required. Manufacturing Engineering or Continuous Improvement specific role experience preferred. · Experience in shop/production management, engineering, operational excellence, lean manufacturing, or related experience is required. · Experience in heavy steel fabrication and well-versed in all types of welding methods (GMAW, GTAW, SMAW, FCAW) is required. ASME code quality experience is preferred · Understanding and use of ERP System (Oracle or other) regarding work routings, standards, costing, and scheduling is required. · Ability to work satisfactorily as a team member and communicate with all levels within the company · Strong interpersonal skills, communication, and presentation skills (both verbal and written) · Ability to proficiently operate a personal computer and be familiar with Microsoft Office Suite software applications must possess potential to learn beyond basics · Ability to handle sudden changes in project/priority and multiple tasks simultaneously in a positive fashion · Ability to set, adjust and change daily priorities · Ability to manage conflict and resolve issues in the most positive fashion for all parties concerned · Ability to identify problems or potential problems at both a strategic and functional level and make or recommend decisions to resolve the same · Projects strong leadership skills · Good organization and time-management skills · Willingness to accept responsibility and take on new challenges · Ability to influence others via communication to get desired results · Ability to exercise a high level of independent judgement on a customary and regular basis · Excellent customer-relations skills · If supervising welding operations, must understand welding symbols and diagrams. · Ability to solve practical and complex problems and deal with a variety of variables in situations where only limited resources may exist is necessary · Ability to interpret a variety of instructions furnished in written, oral or diagram form is necessary · Supervisor and Leadership Expectations Directly supervises two (2) to four (4) supervisory manufacturing personnel to include but not limited to Manufacturing Managers, Production Managers, Maintenance Manager and who, in turn, supervise five (5) to forty (40) employees each and one (1) to ten (10) non-supervisory manufacturing office personnel. Is responsible for the overall direction, coordination, and evaluation of his/her unit. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems in compliance with any applicable employment law guidelines and upon consultation with the General Manager and/or the Director of Human Resources if necessary. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality, and productivity as means to ensure success NOTE: This position responsible for certain internal control responsibilities. These internal control responsibilities are verbally communicated to the incumbent and periodic feedback is provided as it relates to the performance of these internal control responsibilities. WORK ENVIRONMENT Office While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting, or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Provide leadership to the entire combustion field service teams in ensuring that the goals and objectives of the department and the company are met in terms of providing world-class service to our customers. Key Deliverables · Have a goal of delivering the Ultimate Customer Experience · Advocate safety by creating a Zero injury culture to protect our people and our customers assets. · Oversee all field service activities for process heating with the IPS · Maintain accurate data for evaluation and provide feedback to Engineering. Manufacturing, and Sales departments. · The ability to work in a Matrix management/organizational structure. · Stay current with technology that affects the commercial and industrial process heating. Key Activities & Responsibilities · Has responsibility for all field service activities for Thermal heating. · Responsible for the preparation of department budget and compliance with the budget. · Organize, coordinate, and develop a staff to effectively provide field service activities for our distributors and/or customers. · Responsible for organizing, developing, and presenting service training for Astec, Inc. customers, including maintenance, troubleshooting, repair, and operating instructions. · Responsible for telephone service assistance as needed, working from Astec, Inc. offices or home. · Provide accurate data for evaluation by Engineering and Manufacturing Departments for immediate solutions and make recommendations as needed. · Evaluate staff performance at meeting company and personal performance goals and make recommendations based on appraisals. Ensure performance appraisals are utilized throughout the department. · Review and approve expense reports, while controlling costs and following the guidelines in our travel policy. · Review and approve employee timecards. This includes time management for overtime and work schedule from the office to the field. · Coordinate issuance of Service Bulletins and follow up on completion of said work. · Serve on committee and focus groups as assigned. · Participate in staff meetings and other meetings as needed across all sites. · Project a positive company image by interacting with fellow associates, customers, and corporate management in a cooperative, supportive, and courteous manner. · Support and promote the core values of Astec, Inc. · Follow company policies and procedures at all times. · Follow proper safety rules and procedures at all times. · Perform other duties as assigned. To be successful in this role, your experience and competencies are: · Ability to effectively work as a member of a team required. · Excellent communication skills, both oral and written, are required. · The ability to manage conflict and resolve issues in the most positive fashion for all parties concerned is required. · Strong analytical skills required. · Knowledge of all aspects of thermal process heating required. · Knowledge of and skills to read mechanical, electrical, and electronics blueprints and designs required. · Ability to effectively manage others and provide coaching and discipline to departmental employees, as needed, is required. · Bachelors degree or equivalent experience is required · Some travel is required. Must have a valid driver’s license and good driving record. Must be able to obtain and maintain a valid passport. · Must be able to meet regular attendance requirements. Supervisor and Leadership Expectations Responsible for all combustion field service activities across multiple sites. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Safety · Devotion · Integrity · Respect · Innovation NOTE: This position responsible for certain internal control responsibilities. These internal control responsibilities are verbally communicated to the incumbent and periodic feedback is provided as it relates to the performance of these internal control responsibilities. WORK ENVIRONMENT Office While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Lead and supervise the manufacturing of products to quality standards as established by design. Meet production plan through effective scheduling at minimum cost. Implement corrective and preventative measures to address quality issues. Assign personnel to work centers to accomplish tasks prioritized through consultation with other Production Supervisors and Production Manager daily. Key Deliverables • Collect data and compile reports for production., • Ensure production processes are being carried out in line with company and regulatory requirements., • Monitor and prioritize the workflow of production to meet deadlines., • Provide ongoing training, coaching, and development for employees., • Manage and plan people and resources applying in an efficient and effective manner to meet production/maintenance schedule requirements while achieving safety and quality standards., • Prepares and monitors the production floor for daily production/maintenance adjusting for unscheduled demand as necessary., • Facilitate and maintain effective communication between management and operators by sharing day to day safety focus and production/maintenance targets., • Assign Mentor to new employees, support training efforts, and coach all employees., • Investigate, inspect, perform root cause analysis, report, and close all incidents/issues/problems and communicate to immediate supervisor, as necessary. (Including but not limited to spills, accidents, quality and TQM book completion, as well as employee performance management)., • Participate and support all LEAN and continuous improvement initiatives by suggesting and implementing cost-saving ideas., • Review production/maintenance set-ups for accuracy and quality requirements, as necessary., • Assist/Lead trouble shooting of machines, dies, jigs, positioners, & fixtures., • Responsible for providing technical expertise as needed for daily management, change over and/or line setup efficiency, and support the team to achieve operational success., • Monitor time and attendance to ensure compliance with procedures., • Support and ensure compliance with OSHA regulations, the Handbook, Quality and Environmental standards, and all other policies and procedures., • Embraces personal challenge, confident, rounded thinker, self-aware, resilient, assertive motivated, optimistic, action oriented, and open to change., • Engages interest and participation of others and has a collaborative approach to working together., • High school diploma or general education degree (GED); some previous work-related experience is a plus; or a combination of education and experience equivalent as deemed sufficient by management., • Minimum 3 yrs. experience as a supervisor or operator in a heavy manufacturing industry, millwright, or demonstrated abilities through on-the-job training or education., • Minimum 1+ years' experience in Microsoft Excel and lean continuous improvement., • Must be able to read and interpret a tape measure, blueprints, and bills of material (BOM's)., • Continue to grow lean knowledge and use the tools to identify and assist with continuous improvement., • Experience of assisting and developing (multi-skilled) people, • Experience of leading small group activities to drive improvement ideas., • Understanding of production costs to include waste, downtime, scrap, and re-work., • Maintain positive, cooperative working relationships by working, acting, and communicating with various personalities getting along with customers, vendors, co-workers, and management working both individually and as part of a team., • Exercise considerable initiative/judgment in work methods and in interpreting and delegating work requirements/goals., • Excellent verbal and written communication, organization, and problem-solving skills working efficiently and accurately to keep up with production requirements., • Ability to lead by example, gain respect from team and communicate with clarity whilst demonstrating excellence in approach to work and people activities., • Capacity to learn quickly, parts machined are unique to manufactured equipment and change orders are frequent., • Flexible and adaptable in coping with pressures, deadlines, and rapidly changing situations. Oversee 6-25 operators; training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers., • Honesty and integrity in all aspects of business, • Respect for all individuals, • Preserving entrepreneurial spirit and innovation Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

Job DescriptionDescription: The Manufacturing Engineer is responsible for developing, evaluating, and improving manufacturing methods to achieve improved quality, product cost, and manufacturing efficiency. This position applies knowledge of design, materials/components, fabrication, welding and paint processes, tooling and production equipment capabilities, assembly methods and quality standards. This position is part of a cross functional team with their main purpose being the support of new product development prototypes in the heavy equipment industry. The role works closely with the design engineering team to ensure new designs are safe, cost effective, and match production capability strengths while working with the production and supply chain teams to ensure prototype procurement of project components meets project deadlines. Requirements: Candidate will use skills acquired through formal training/education to execute the following and related tasks in support of product development and management responsibilities. • Provide Design for Manufacturing and Assembly guidance for the new product development project teams, • Coordinate with engineers, project managers, production team, and supply chain members to ensure prototype part procurement decisions match vendor capabilities and project timelines, • Ensure new products can be built safely within facility capabilities or provide recommendations for additional facility requirements based on new designs requirements, • Coordinate with production planning on expedited prototype parts through on site manufacturing facility, • Recommend ways to reduce product costs and improve functionality. Actively work with design engineers and product line teams to implement design and manufacturing changes., • Partner with quality department and shop floor in quality improvements through root cause analysis and problem resolution., • Ensure all changes are made consistent with ergonomic and other safety standards., • Manage production bills of material and support material requirement planning systems, • Train employees as needed., • Bachelor’s degree in Mechanical / Manufacturing / Industrial Engineering or an equivalent field of Engineering., • 3-5 years of experience within a manufacturing environment, • Experience or education in electrical or hydraulic system troubleshooting preferred, • Experience with sheet metal fabrication and CNC machining preferred, • Experience with welding science and best practices preferred, • Experience with MS project or similar project planning software preferred, • Experience with ERP material and routing setup preferred, • Ability to read and understand design drawings with geometric dimensioning and tolerance (GD&T)., • Strong computer skills (Excel, Word, CAD software, SolidWorks, ERP/MRP system)., • This position may exert up to 35 pounds of force occasionally with assistance, and/or up to 10 pounds of force frequently as well as the use of arm and/or leg controls with exertion greater than that of sedentary work. May also push, pull, lift, carry, grasp, finger or otherwise move objects, • Normally assigned to an office environment; will be required to work a substantial amount of time in the factory environment., • Uses computer terminal frequently; interfaces with other employees and outside visitors by e-mail, telephone, mail and/or in person., • Is required to wear safety glasses, ear protection, and safety shoes within the factory environment.

Job Description:\n\nBUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION At Astec, we are building a world-class electrical hardware and controls software engineering team. A team that values free thought for innovative idea generation and disciplined engineering for the realization of those ideas to drive solutions for our customers. By freeing our creative minds, we bring solutions our customers haven’t even realized they need yet. Through disciplined engineering we ensure the solutions we provide are effective, simple to use, reliable, and cost effective. The Electrical Engineer will be a part of a dynamic team of engineers working on the development of control/automation systems for heavy construction equipment, ranging from road pavers, road mills, woodchippers, wood grinders, etc. The engineer will be involved in the creation of product requirements, decomposition to electrical hardware and software requirements, design calculations, schematic generation, PCB designs, junction box designs, wiring harness routings and designs, and electrical design reviews of the same; all with an eye toward Design for Reliability (DfR). The engineer may also work on structured software decomposition, code development, software design reviews, and software unit and integration testing. The engineer will move from project to project as required and may be working on multiple projects within a given timeframe. All project work will be scheduled by the New Product Development Manager(s) and the Continuous Improvement Manager(s) such that the engineer will not be over allocated but will have definite deadlines and visibility into upcoming work. Electrical designs will be based on embedded controller and HMI displays. The designs will predominately be composed of 24VDC control of motors, valves, pumps, actuators, relays, etc. with sensor inputs in the same or similar range. Control outputs may be DC voltage or current, PWM, or PID control loop signals. Some designs will require AC power control using VFDs, soft starters, etc. Software will be developed on PLCs, embedded controllers, and HMI displays. Some legacy systems are coded in Ladder Logic, but all new systems will be coded in either CodeSys or C/C++. The Control Software Engineer will work with the Electrical Engineer(s) on a project to map I/O, define necessary configurations, understand sensor input requirements as well as device output drive requirements. The Electrical and Control Software Engineers will work cooperatively with the Mechanical Engineer(s) to develop the appropriate control controls hardware design as well as controls algorithms to produce the equipment functionality required by the customer and Product Management. The Electrical Engineer will also work with other cross-functional teams, including but not limited to sales, manufacturing, purchasing, and service to ensure the successful completion of projects and launch of equipment. Electrical Engineer may at times be asked to travel for project testing and system integration testing, as well as to develop business relationships with customers, dealers, and suppliers. They may also participate in product focus groups to gain critical customer application and design suggestions to assist in the development of product lines. Travel may also be required at times to troubleshoot and resolve customer equipment issues in the field. ESSENTIAL DUTIES AND RESPONSIBILITIES (may include but not limited to) · Works with the cross-functional Product Management Team to produce a complete and well-defined Product Functional Specification before product design is started. · Follow Structured System Design techniques to decompose the product function requirements into an effective control strategy for heavy construction equipment. · Uses knowledge of sensor technologies, control device technologies and process automation techniques to advance the simplicity of operation and troubleshooting of equipment to maximize productivity by enhancing operator functionality and the minimization of equipment downtime. · Uses knowledge of domestic as well as international electrical standards to design equipment with the widest market breadth without redesigning to minimize the number of models required to be manufactured. · Apply Design for Reliability processes and principles to realize desired equipment reliability and Total Cost of Ownership requirements. · Uses structured system design techniques to produce electrical hardware designs that are modular in nature, easy to test, easy to diagnose and simple to replace should field service repairs be required. · Develops and executes bench tests with the Controls Software Engineer on design modules and code units to ensure proper functionality before integration into the complete equipment design to ensure project success. · Uses computer-aided engineering design software and equipment to develop electrical / electronic design drawings and schematics. · Develop PCB layout designs for panels. · Develops 3D Junction Box designs with plug-and-play functionality that allow manufacturing to simply plug in all harnesses and requires no landing of conductors in equipment assembly. · Create 3D routed wiring harnesses for all wires and cables required for a system design. All harnesses shall be terminated in a connector to allow for a plug-and-play assembly. · Develops detailed drawings for new designs and modifications to existing designs. · Leads cross-functional electrical design reviews, including Design for Manufacturability and Design for Reliability. · Contributes to the development of product documentation, including production work instructions, training manuals, troubleshooting guides, and product test plans. · Identifies improvement opportunities and enhancements for product enhancements and/or cost reductions. · Contributes to project teams by championing the successful completion of project objectives, including schedule, budget, and feature set. · Contributes to the development of new processes and procedures to enhance the software and hardware design capabilities and work products of the engineering team. · Develops the electrical and software test plans for new designs and changes to existing designs and coordinates the testing and validation using these plans. · Participates in cross-functional software and HMI design reviews. · Participates in software design reviews for developed control software. · Assists customers, via telephone or on site, to resolve function and/or application issues. · Works with the Manufacturing department to resolve production issues. · Works with the Service Department to resolve field and warranty issues. · Works with the Purchasing Department and suppliers on new or existing component issues. · Works with the Technical Publications Department to develop and update operation/parts/service manuals. · Adheres to all Astec design and coding standards. · Performs engineering calculations as required during design cycle. · Follows proper safety procedures. · Performs other duties as assigned. MINIMUM EDUCATION and/or EXPERIENCE REQUIRED · Bachelor of Science (4-year) degree in Electrical/Electronic/Computer Engineering or related field from an accredited institution. · Minimum of five (5) years of experience in the design and development of industrial or mobile equipment controls. SKILLS AND ABILITIES REQUIRED Job-related Skills and Abilities · Knowledgeable of structured system design techniques. · Knowledge of Design for Reliability is highly desired. · Knowledge of design for safety standards such as CE, AS3000, SIL, HRN, etc. · Proficient with computer-aided design software. · Knowledge of network protocols such as CAN, Ethernet, Wireless 802.11, etc. · Proficient in the development, reading, and interpretation of electrical engineering drawings. · Proficient in electrical engineering systems design and troubleshooting, D/C controls design required, A/C design highly desired. · Ability to think creatively and propose innovative solutions to engineering challenges. · Ability to show competence in assessing, managing, and mitigating risks within a project and design. · Ability to work satisfactorily as a team member. · Good communication skills (both verbal and written). · Good organization and time-management skills. · Willingness to accept responsibility and take on new challenges. · Ability to exercise discretion and independent judgment on a customary and regular basis. · Proficiency with personal computer and Microsoft Office Suite software applications. · Proficiency with Electrical CAD software, specifically EPLAN, is highly desirable. · Adept at problem solving and root-cause analysis. Leadership Skills · Ability to mentor and lead junior level engineers in the design and execution of systems controls. · Ability to represent the electrical and software design team in cross-functional meetings by being the voice of good engineering practice. · Ability to step into a leadership void and lead a team to proper completion of tasks, projects, and investigations while encouraging others and moving toward a best solution for all involved. Language Skills · Ability to write reports, business correspondence and procedure manuals. · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. · Ability to write routine reports and correspondence and effectively present information to customers and/or employees of organization and respond to questions from groups of managers, clients, customers, and the public. Reasoning Ability Skills · Ability to define problems, collect data, establish facts, and draw valid conclusions. · Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. · Must have strong analytical and troubleshooting skills. OTHER REQUIREMENTS · Pre-employment drug screen, physical, and background check. · Flexibility to work additional hours as required. · Occasional travel (including international). · Valid driver's license and ability to safely operate a motor vehicle. PREFERENCES · Proficiency with Solidworks, EPLAN. · Experience with CodeSys, C++, Telematics, hydraulic circuits, 12V/24V DC electric circuits and/or control systems for off-road construction equipment or heavy industrial equipment. · Knowledge of manufacturing processes. · Experience in the design and manufacture of off-road construction equipment. · Experience with Design for Reliability. SAFETY Astec is dedicated to a culture of Behavior Based SAFETY and a Healthy Environment! · Proficient in promoting safe and healthy work environment. · Notify area supervisor of product discrepancies or equipment malfunctions. · Adhere to established company policies and procedures paying special attention to safety regulations. · Report defective materials, equipment, or questionable conditions to the area supervisor/manager to identify and correct the root cause. · Wear personal protective equipment (PPE) in accordance with training guidelines. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to remain in a stationary position a minimum of 50% of the time, move and frequently operate a computer and other office equipment and occasionally properly employ objects, tools and/or controls. The employee is frequently required to communicate and exchange accurate information. The employee is regularly required to reach and occasionally attain non-standard physical positions for varying amounts of time. Specific vision abilities include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. The employee must regularly transport up to 10 pounds and occasionally transport up to 25 pounds. Lifting devices must be used or help must be requested for anything over 25 pounds. Required to occasionally ascend/descend, balance and work at various heights. Ability to travel by land and/or air for extended periods of time. Specific vision abilities required by this job include close, distance, color, and peripheral vision, depth perception, and ability to adjust focus. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers. · Honesty and integrity in all aspects of business. · Respect for all individuals. · Preserving entrepreneurial spirit and innovation. · Safety, quality and productivity as means to ensure success. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to a climate-controlled office environment and is occasionally exposed to a shop manufacturing environment. Office environment exposures include frequent and extensive telephone and computer use. The noise level in the office setting is usually moderate consistent with an office environment. Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Mines, road construction and forestry job site exposures include exposure to climate conditions indicative of the geographic location and the season. Field duties require that the employee work in close proximity to heavy roadbuilding and construction equipment (dump trucks, loaders, cranes, crushers, pavers, cold planers, material transfer vehicles, stabilizers, wheel loaders, excavators, skidders, feller buncher, chippers, grinders etc.) and traffic associated with mines, road construction, forestry and recycling sites. T

Job DescriptionDescription: Sherman + Reilly designs and manufactures stringing and pulling equipment and related solutions for the utility industry. The Quality Manager is responsible for improving product and process quality across our heavy equipment manufacturing operations by working with suppliers, operations, service, and engineering. The Quality Manager is responsible for improving product and process quality by collaborating with suppliers, operations, service, and engineering. The right person is: • Hands-on and enjoys understanding how equipment works., • Pragmatic – can distinguish between “nice to have” and “must have” and scale the response to the problem., • Clear communicator – able to explain issues and tradeoffs to everyone from welders to senior leadership. This position will report to the Director of Supply Chain and Quality. This position must work closely with Supply Chain, Production, Engineering, Service, Sales and customers, and act as a liaison between functional areas. Requirements: Primary Responsibilities Nonconformance Management • Own the nonconforming material (NCM) process from identification through disposition (rework, repair, scrap, use-as-is)., • Facilitate root cause analysis and corrective action using tools like 5-Why, 8D, and fishbone diagrams, scaled to the size of the issue., • Track and reduce repeat defects, chronic rework, and escapes through practical, process-focused fixes., • Lead quality support for 250+ suppliers with 5,700+ SKUs., • Partner with Supply Chain to evaluate and develop suppliers for any component (fabrication, hydraulic, electrical, mechanical, etc.) with the goal of increasing flexibility and reducing lead time., • Define inspection requirements (test reports, certifications, FAIR, PPAP as appropriate) for critical purchased parts and assist in incoming inspections., • Alongside Sourcing, define the supplier quality lifecycle including supplier qualification, ongoing performance measurements (defects, OTD, responsiveness), and exit plans. Contribute to supplier scorecards and prioritize supplier improvement efforts., • Work with Engineering and Manufacturing to review new and existing designs for manufacturability, serviceability, and realistic tolerances., • Encourage the use of common parts, practical tolerances, and features that fit our processes and supplier capabilities. Provide feedback on critical characteristics, stack-ups, and features that drive complexity, rework, or field failures., • Lead daily quality support for two Chattanooga sites, • Develop and maintain right-sized inspection plans that operators can use., • Support Operations by observing and troubleshooting processes in welding, machining, fabrication, paint, and final assembly to identify sources of variation, scrap, and rework., • Oversee and perform materials/mechanical testing, perform pull/push tests using an Olsen tensile/compression machine and hardness testing (e.g., Rockwell/Brinell) per drawing/spec., determine when additional testing is required., • Support customer complaint intake from Service. Drive field failure analysis and warranty trend reviews for purchased components and maintain feedback loops with Engineering and suppliers., • Develop and refine quality procedures and standards to support business growth., • Utilize 3D optical metrology (Keyence) for first-article, in-process, and final inspection. Manage storage and traceability of scan-to-CAD comparison data and dimensional reports., • Ensure calibration and traceability for all key inspection, gauging, and process instruments., • Use existing systems (SAP ByDesign and other tools) to record NCM, scrap, rework, and customer issues in a consistent way., • Develop and maintain simple dashboards for internal quality performance (scrap, rework, rework hours) and supplier performance (delivery, quality, responsiveness), • Lead and develop a small team (quality engineer/inspector); set goals, coach problem solving, and build an ownership mindset., • Champion a culture of fact-based problem solving, curiosity, and accountability rather than blame., • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Industrial Technology, or related field; or equivalent combination of technical education and hands-on experience., • 5–10 years of experience in quality and/or manufacturing engineering in one or more of the following: Heavy equipment, utility equipment, off-highway, construction, or agriculture; Trailers, truck bodies, cranes, aerial lifts, or similar equipment; Welded fabrication and machined components for industrial applications, • Demonstrated success improving quality in small or mid-sized manufacturers where systems were still being built and refined., • Experience with welded structures, machined parts, mechanical assemblies, and basic hydraulics/electrical components., • Proficient with common inspection tools (calipers, micrometers, height gages, thread gages, etc.) and able to define effective checks., • Practical experience with root cause analysis, corrective actions, and basic problem-solving tools (5-Why, 8D, fishbone, control plans, capability concepts)., • Strong ability to read and interpret mechanical drawings, including weld symbols and GD&T., • Hands-on experience with 3D scanning/optical metrology (Keyence or equivalent) and tensile/compression/hardness testing equipment (e.g., Olsen/Rockwell/Brinell)., • Onsite role across two Chattanooga manufacturing facilities; up to ~15% travel to suppliers, customers, and service/rental locations., • Regular presence in manufacturing areas, including welding, machining, paint, and assembly., • Ability to navigate manufacturing areas and inspect equipment as needed.

Job Description Join Us as a Mobile Mechanic/Technician! About Kooner Fleet Management Solutions Kooner Fleet Management Solutions is one of the fastest-growing national providers of on-site fleet maintenance, preventative service, and mobile repair solutions. With nearly a decade of industry experience, Kooner FMS helps fleets reduce downtime, extend vehicle life, and simplify operations through proactive maintenance programs and advanced technology. As a family-founded and field-first company, we take pride in delivering trusted partnerships, exceptional service, and innovative fleet management solutions that keep America’s trucks and trailers road-ready. Why You’ll Love Joining Our Team • Earn What You Deserve: Competitive pay starting at $32-38/hr. based on experience., • Weekly Paydays: Get paid every Friday – no waiting around!, • Take the Wheel: Enjoy a fully equipped company service truck for use on-site., • Fueled for Success: Enjoy a company-paid fuel card so you never pay out-of-pocket at the pump. Stay Connected: Cell phone allowance included., • Invest in Your Future: 401(k) with company match., • Health Benefits that Kick in Fast: Medical, Dental, and Vision coverage after just 30 Days!, • Time to Recharge: Enjoy paid vacation time, paid sick time, and paid holidays to rest, recharge, and take care of what matters most., • We’ve Got You Covered: Life & Disability Insurance for added peace of mind – because we take care of our team on and off the job., • We’re Here for You: Access to our Employee Assistance Program for support when you need it most – we've got your back., • Bring a Friend, Get Rewarded: Refer great talent and earn $500 per successful hire – no limits on how many bonuses you can earn!, • Grow With Us: Big Career Growth Opportunities in a rapidly expanding, forward-thinking organization. About the Mobile Mechanic/Technician Role As a Mobile Mechanic/Technician, you’ll be the expert our customers rely on to keep their fleets on the road. This field-based role is perfect for skilled technicians who enjoy independence and variety in their work. You’ll be responsible for performing preventative maintenance, diagnostics, and repairs on light and medium duty vehicles, including emergency roadside service when needed. Geared up with top-tier specialty tools, and a supportive team that values your skill, drive and dedication, you’ll tackle new challenges every day and take pride in delivering safe, reliable and efficient service that keeps America moving. Where You’ll Make an Impact • Perform onsite preventative maintenance, DOT inspections and follow up repairs to light and medium duty vehicles in a mobile field environment., • Handle emergency road service calls with confidence and urgency., • Respond to dispatch requests for scheduled and unscheduled service or maintenance., • Diagnose and repair electrical, brake, cooling, and air systems - everything that keeps a fleet running strong., • Use advanced diagnostic tools, including handheld computers and precision instruments, to identify and fix issues fast., • Put your expertise to work using hand tools, power tools, and welding equipment to get the job done right., • Road test vehicles to ensure every repair meets top-quality standards., • Stay productive and efficient, meeting or beating industry-standard repair times., • Work with trusted vendors to source parts and keep operations moving., • Take ownership of a company-issued service truck, perform maintenance and pre- and post-trip inspections, and ensuring safety compliance., • Jump in wherever needed – we're a team that supports each other. What Makes You a Great Fit • At least 3 years of hands-on auto or diesel tech experience working on light to medium duty vehicles., • Strong communication skills – you know how to connect and communicate with customers and drivers alike., • Comfortable using mobile apps, navigation systems and digital tools to stay organized and document repairs., • Ready for the outdoors – rain or shine at customer yards., • Independent, dependable, and self-motivated – you take pride in getting the job done right., • A positive attitude and safety-first mindset., • Must be 23+ with a clean driving record and a valid driver’s license., • Bring your own hand tools and we’ll supply everything else. Work Environment • Work in dynamic, high-traffic areas – safety and precision are key., • Expect exposure to dust, diesel fumes, and noise typical of a shop or yard environment., • Safely handle chemicals, oils, and grease as part of repair work., • Be ready to lift, move, and position heavy equipment or components., • Stay active – you'll bend, kneel, crawl, and crouch to access vehicle components., • Work outdoors in all weather conditions – rain or shine, our team gets it done. Kooner Fleet Management Solutions is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants, free from discrimination and harassment. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. We celebrate diversity and are dedicated to fostering a workplace where every team member can thrive. Kooner Fleet Management Solutions participates in E-Verify for employment eligibility verification. #KFMS1

Job Description BUILT TO CONNECT Astec is a global, manufacturing company of infrastructure development equipment. Our products range from asphalt and concrete plants, aggregate crushers and handlers, industrial heaters and more. Connection is at the heart of everything we do. We design and manufacture products used to build the infrastructure that physically connects the world, but the connections we make with people are what drive us forward. We were founded on innovation and a passion to help our customers succeed. Leveraging innovative solutions and technologies, we serve customers all over the world. We are committed to design and build the most innovative products. LOCATION: ABOUT THE POSITION Responsible for plant set-up, maintenance, and repairs with minimal supervision. Deliverables & Responsibilities · Must be fully competent in all aspects of fabrication and assembly of major asphalt equipment with minimal supervision. · Must be fully experienced in plant assembly and operation specifications. · Must be able to build A/C Piping and Hot Oil Piping. · Ability to work at heights. · Must be able to read set-up prints and lay out a jobsite. · Ability to read and comprehend set-up drawings and subassembly drawings. · Rigging and crane knowledge is required. · Must be physically able to perform all aspects of the job in outdoor conditions, i.e. climbing with fall protection and training, standing for long periods, and exposure to extreme elements and harsh conditions. · Follow company policies and procedures at all times. · Follow proper safety rules and procedures at all times. · Perform other duties as assigned. To be successful in this role, your experience and competencies are: · High school diploma or equivalent certification required. · 0-2 years of related experience or equivalent job experience required. · Welding experience required. · Ability to work in high situations without physical/mental limitations required. · Ability to read and comprehend set-up drawings and subassembly drawings required. · Must be a team player with other employees. · Must be able to travel! · Needs to have great customer service skills when dealing with the customers on/off of the jobsite. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success Travel Requirements: 100% of travel, regional, international WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under supervision, the Electrical Technician must be capable of performing all tasks in Astec manufacturing electrical department. Must be able to assemble, evaluate, troubleshoot and correct deficiencies to make certain product specifications are met. Ensure that work is in accordance with relevant codes. This level of electrician will deal with live energized equipment and be trained and capable of performing all required tests and if necessary de-energize equipment to meet safe standards before proceeding. Key Deliverables • Assemble, evaluate, test, and maintain electrical or electronic wiring, equipment, appliances, and apparatus., • Troubleshoot and repair malfunctioning equipment., • Construct and fabricate parts, using hand tools and specifications., • Read and interpret electrical and electrical circuit blueprints and diagrams., • Demonstrate Astec processes in all aspects of the manufacturing electrical department including panel room, construction manufacturing and industrial manufacturing as warranted by workload demands and scheduling needs., • Test and troubleshoot heaters to ensure equipment is ready before shipping to customer site., • Correct and re-test to verify corrective action was successful., • Communicate with electrical engineering recommendations to correct or improve processes., • Monitor quality issues that warrant concern and encourage postponement of equipment from being shipped., • Achieve quality results as it relates to the Company's vision and mission., • Promote and educate others on Astec's core values., • High School Diploma or equivalent and/or accreditation from a technical school or an applicable skilled trades program required., • 0-2 years working in manufacturing in order to understand equipment and process procedures., • Electrical background., • Must be detail oriented, good workmanship while taking and following direction with little to no supervision., • Demonstrated track record of working cross-functionally and as a team necessary., • Strong problem-solving skills desired. None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers, • Honesty and integrity in all aspects of business, • Respect for all individuals, • Preserving entrepreneurial spirit and innovation Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order. POSITION DETAILS Title: Electrical Technician I - Wilson Road Location: Chattanooga Tennessee 37410 Work Type: Full-time, On-site

Job Description Manage daily production activities for approximately 20 reports, in relation to fabrication and welding parts for heavy equipment. This includes laying out daily production requirements, and monitoring quality while ensuring a safe work environment. Mon-Thurs 10 hours, Friday 1/2 day usually Requirements Previous verifiable experience (3 to 5 years min) in Manufacturing Management (Plant Manager, Supervisor, Foreman, etc.) is a must, with an emphasis on welding and fabrication. • Ability to meet requirements regarding: work safety and adhere to all federal, state and company policies and procedures governing safe work practices and vehicle operations., • Sense of urgency, individual responsibility, and ability to effectively work with changing priorities., • High ethical standards and ability to function as team player., • Self-starter with high level of initiative., • Strong interpersonal skills., • Strong written and verbal communication skills., • Strong analytical and problem solving skills., • Proficient computer and Microsoft Office skills. Benefits THIS IS NOT A TEMP TO HIRE POSITION, IT IS A FULL TIME POSITION WITH BENEFITS. Employees are eligible for a full benefit package: Salary plus for over 45 hrs. per week. 10 paid holidays + 1 week vacation after 6 months, 2 weeks after 18 months, 3 weeks after 5 years, 4 weeks after 10. Medical, dental and vision insurance is offered at very reasonable rates. Family coverage is approximately $100 per week. Company paid life insurance for employee, optional coverage is available for family at additional discounted cost. Uniforms provided. Pay is weekly. Regularly scheduled performance reviews.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under the direction and supervision of the Department Production Superintendent and in cooperation with the Foreman and Bay Coordinator, weld metal components with welding equipment to fit and join, fabricate, and/or repair heavy and large mechanical products per specifications and in accordance with the production schedule. Key Deliverables • Adhere to all safety rules and perform work at a quality level, • Read and understand assigned blueprints prior to starting a project., • Participate in process and product development and improvement programs., • Accurately inspect metal prior to welding to ensure clean welds., • Perform grinding operations that comply with Astec’s standards Key Activities & Responsibilities • Must be able to safely perform gang-welding techniques (do’s and don’ts)., • Must be able to safely weld vertical, flat, and overhead with both MiG and stick., • Successful completion of Permit Required Confined Space Entry training is needed., • Must work with Fitters on proper assembly of equipment., • Inspect welds for quality and proper weld., • Keep work area clean and neat., • Ensure welding machine settings are appropriate for work to be performed, • Must be able to safely use cranes and forklifts., • Must be able to read and understand weld symbols., • Must select proper rods or wires to perform the welding job., • Follows company policies and procedures at all times., • Follows proper safety rules and procedures at all times. To be successful in this role, your experience and competencies are: • High School Diploma or GED required., • Trade school or community college course work preferred., • 5+ years of experience with heavy equipment production line welding., • MUST be able to pass a 6G TIG Test., • Must be able to read a tape measure., • Performs 4 or more critical or difficult tasks using independent judgement., • Knowledge and ability to perform all Grinder tasks required., • Ability to properly and safely MiG weld, stick weld, and arc gouging required., • Ability to read and understand weld symbols required. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers, • Honesty and integrity in all aspects of business, • Respect for all individuals, • Preserving entrepreneurial spirit and innovation, • Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. DH Pace Company, Inc. is seeking to hire an Entry/Automatics Door Installer in Chattanooga and surrounding areas. This Entry Door Installer will be responsible for providing safe and accurate installation of doors and hardware, industry-leading customer service, and a commitment to quality workmanship in a team-based environment. If you have any experience with automatic doors, access control, glazing, closers and hollow metal, or any other skilled trade, you may find this opportunity to be a great fit for your career! Job Responsibilities: • Install hardware on a wide range of commercial entry doors in both a shop and field/job-site setting, • Repair, adjust, replace, and/or troubleshoot issues with entry doors and associated hardware, • Communicate progress and challenges to Install Supervisor, • Always operate in a safety conscious manner, • Prior experience in a similar role preferred but not required, • Welding experience a plus, • Able to safely lift 100 pounds, • High School Diploma/GED preferred, • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Job Title: Multi Craft Maintenance Technician Job Description As a Multi Craft Maintenance Technician, you will be responsible for troubleshooting and repairing all production machinery, including paint process machines, paint robotics, hydraulic presses, conveyor systems, welders, and rack systems. You will also handle general maintenance duties as needed. Responsibilities • Troubleshoot and repair production machinery including paint process machines, robotics, and hydraulic presses., • Perform maintenance checks and repairs for paint equipment, ensuring cleanliness and adherence to 5 'S' Standards., • Assist Automation Technicians with repairs and apply preventive maintenance strategies., • Install and maintain mechanical, electrical, and electronic transmission testing and control equipment up to maximum plant voltage., • Diagnose and solve mechanical, electrical, or electronic issues with paint application and support equipment, including RTO, robots, chillers, air-houses, burners, and conveyors., • Design and install supports, conduit, wiring, and piping for various equipment., • Build and repair large single-phase and three-phase equipment from wiring diagrams and sketches., • Maintain compliance with all applicable codes and guidelines by NFPA, NEC, OSHA, etc., • Operate power tools including grinders, drill presses, and saws., • Responsible for rigging, moving machinery, and accurate installation., • Ensure all equipment is properly lubricated and maintained., • Troubleshoot and diagnose repairs on all paint line equipment., • Electrical and mechanical troubleshooting skills., • Experience with robotics, schematics, preventive maintenance, and PLC troubleshooting., • Proficiency in welding, fabricating modifications, and performing preventive maintenance checks., • Ability to work with conveyor systems, pneumatics, hydraulics, and industrial maintenance., • Experience with power tools and rigging machinery. Work in a climate-controlled manufacturing paint environment. The position requires flexibility to work various shifts, including a second shift from 2 pm to 10:30 pm, Monday to Friday, and rotating night shifts of 12 hours. Training will occur over a six-month period on a rotating 12-hour schedule. Why Work Here? Join a dynamic work environment that values continuous learning and improvement. Benefit from a structured training program and opportunities to work with advanced technologies in a supportive team setting. Job Type & Location This is a Contract to Hire position based out of Chattanooga, TN. Pay and Benefits The pay range for this position is $40.11 - $40.11/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Chattanooga,TN. Application Deadline This position is anticipated to close on Feb 17, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Tank & Vessel Estimator Department: Estimating Reports To: Estimating Manager Status: Regular Full-Time – Exempt About Milco: Join Milco National Constructors and DBM Global as a Tank and Vessel Estimator, where you will play a vital role in our growth and success as a leading constructor and maintainer of field-constructed tanks and vessels. We are seeking a dynamic individual who thrives in a challenging and rewarding environment, with a passion for delivering successful and profitable tank estimates to support our expanding tank operations. Responsibilities: • Performing accurate and profitable tank estimates to support the sales of tank operations. This involves attending pre-bid meetings, conducting material and labor take-offs, submitting proposals to customers, and negotiating contract awards to secure successful sales., • Assisting in the negotiation of contracts for projects estimated by other Milco National Constructors staff, actively contributing to closing sales, and facilitating the kick-off process internally and externally once a project is sold., • Collaborating with other divisions within DBM Global on large turn-key and EPC projects, providing tank and mechanical construction estimates for markets such as pulp and paper, power, chemical, and other heavy industrial sectors across the United States., • Working closely with tank division management to contribute to the establishment of a fully functional and profitable tank and vessel operation in Chattanooga, TN. The role includes identifying areas for improvement to maximize performance, fostering a team atmosphere, and aiding in the onboarding and training of new employees., • Developing and maintaining relationships with material suppliers to ensure competitive bid pricing and aligning material purchases with estimates in collaboration with the purchasing department., • Understanding and interpreting engineered drawings to grasp supply scope and facilitate material and labor take-offs., • Demonstrating a solid understanding of construction processes such as rigging, welding, crane operations, etc., • Ideally holding an Engineering degree or Construction Management degree, though substantial industry experience will be given significant consideration., • Utilizing computer proficiency to handle estimating and daily operational requirements efficiently. Education and Experience: While an Engineering degree or Construction Management degree is preferred, we highly value industry experience in this role. Computer Proficiency: Proficient computer skills are essential for estimating and handling daily operational requirements efficiently. Travel: Some short-duration travel will be required to visit potential customers and monitor project performance. At Milco National Constructors and DBM Global, we believe in nurturing talent and providing ample opportunities for personal and professional growth within our national organization. Your contributions and dedication will be recognized and rewarded, empowering you to reach new heights in your career. At Milco, we believe our employees are our greatest asset. Our team environment is based on respect, effective communications, and accountability. We believe employees should have great working conditions along with opportunities to grow and develop. We proudly promote a diverse and inclusive workplace where everyone has a chance to be successful. Milco is an Equal Opportunity Employer with an Affirmative Action Plan. We value Diversity. #LI-KM1

Job Description General Maintenance Technician needed Full Time to join our Team! Prefer Food Machinery / Food Factory experience. • Experience necessary, electrical and electronics a plus. PLC, Allen Bradley, AC/DC, motors and welding would be beneficial., • General mechanical and pneumatic knowledge expected. We are looking for a professional, experience maintenance person who can work efficiently, promptly and professionally. This candidate will perform necessary work to keep machines, mechanical equipment, and structure of an establishment in repair. We need a reliable individual with good workmanship practices, good attendance and punctuality, able to be versatile and work neatly. Shop area must be kept clean and tidy at all times and Maintenance log books and records kept up to date. Must have ability to work well with others and to learn and apply new skills. Must be 18+ Years old. Note: Duties of all positions will be adjusted as needed to meet business needs. Hours: Monday - Thursday 8:30a-5:30p and Friday 8:30-3p. 40-42 hours per week. Compensation $20-25-Base on knowledge, expertise, and skills. Company DescriptionCustomer Driven Staffing's mission is to help employers achieve organizational success by creating relationships that work! We strive to provide a personal and professional service experience to our employees, customers, and business partners.Customer Driven Staffing's mission is to help employers achieve organizational success by creating relationships that work! We strive to provide a personal and professional service experience to our employees, customers, and business partners.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION The Maintenance Technician I is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive and productive maintenance systems, and processes to support the achievement of the site's business goals and objectives. Key Deliverables • Respond quickly in the event of an emergency repair., • Fix potential safety hazards to avoid injuries., • Repair broken or leaking plumbing., • Maintain the building HVAC equipment in order to keep climate control in the facility functioning properly., • Install and maintain production machines and the plant/facility's equipment, • Provide emergency/unscheduled repairs of production equipment during production, • Conduct scheduled maintenance repairs of production equipment during machine service, • Perform simple machinist duties and responsibilities, • Utilize mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines, • Execute regular preventive maintenance on machines, equipment, and plant facilities, • Read and interpret equipment manuals and work orders to complete required maintenance and service, • Diagnose problems, replace, or repair parts, test and adjust, • Perform a variety of plumbing, maintenance, and carpentry functions, • Operate a variety of hand and power tools, electric meters, and material handling equipment in performing duties, • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision, • Comply with safety regulations and maintain clean and orderly work areas, • Achieve quality results as it relates to the Company's vision and mission, • Promote and educate others on Astec's core values, • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience, • 0-2 years of manufacturing experience; strong hydraulic, electrical, pneumatic, mechanical, and industrial skills with some PLC experience and HVAC, • Ethical conduct is essential., • Demonstrated ability and initiative to achieve results is required., • Must work well independently and with others for the purpose of achieving mutual goals., • Technical capability and problem-solving skills are critical. None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers, • Honesty and integrity in all aspects of business, • Respect for all individuals, • Preserving entrepreneurial spirit and innovation Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

Job Description Controls Engineer (Chattanooga, TN) Responsibilities (Including but not limited to the following) • Responsible for PLC programming, debugging, and troubleshooting of new automation systems, • Review and optimization of existing customer programs and equipment, • Program and troubleshoot system upgrades and modifications, • Assist with systems risk analysis per the RIA standards, • Assist in the development of electrical and controls system design, • Communicate and collaborate with team members, leadership and customers, • Present information in one-on-one and small group situations to customers, clients, and other employees of the organization • Documentation and building of control program manuals, • Provide Production Support, • Training of regular customer staff and maintenance crews at the customer facility Requirements • Degree in software or engineering (Bachelor/Technical College) or equivalent professional experience Preferred -Functional knowledge Siemens Step 7 -Functional knowledge Siemens TIA V16 -Programming safety engineering in Step 7 and TIA, incl. verification and documentation -Programming HMI in WinCCflex and TIA -Fanuc, ABB, or Kuka robot training -Process experience (resistance welding, arc welding, laser, vision) -Must pass a pre-employment drug screening and background check -Out-of-area and overnight travel may be expected (approx. 30%) -The ability to travel internationally is required (passport). Must have valid driver’s license. Company DescriptionLEWA Attendorn () is a leading robotic systems integrator based in Germany, supporting automotive customers around the world. We specialize in automated joining processes such as resistance welding, arc welding, laser welding and brazing, riveting gluing, sealing, etc. and automated machining processes. LEWA Automation USA was established in Chattanooga, TN to support our customers with installations in the US, provide ongoing plant services and support, and to provide local build and integration services.LEWA Attendorn () is a leading robotic systems integrator based in Germany, supporting automotive customers around the world. We specialize in automated joining processes such as resistance welding, arc welding, laser welding and brazing, riveting gluing, sealing, etc. and automated machining processes. LEWA Automation USA was established in Chattanooga, TN to support our customers with installations in the US, provide ongoing plant services and support, and to provide local build and integration services.

Job Description Wright Technical Services is supporting a growing advanced manufacturing and automation environment seeking a hands-on Robot Technician / Robot Programmer to support robotic welding and material handling systems across production and customer project sites. This role is ideal for someone who enjoys full system ownership, from mechanical build and tooling setup to robot programming, troubleshooting, and commissioning. The team is expanding due to increased project volume and internal growth and is looking for individuals who can contribute immediately in both plant and field environments. Responsibilities • Perform robot setup, touch-up, and basic intermediate robot programming, • Support full robot builds from delivery through commissioning, including DCS setup, job structures, PLC communication, and safety configuration, • Program and troubleshoot material handling and spot-welding robotic systems using grippers and spot guns, • Perform weld cell assembly and disassembly, • Shim tooling to meet customer gauge and tolerance requirements using prints and CMM feedback, • Perform cut & etch inspections on welded parts, • Read and interpret blueprints, weld prints, and assembly drawings, • Troubleshoot robot, tooling, and electrical issues including wire stick, minor alarms, sensor failures, and blown fuses, • Support HMI and PLC interaction troubleshooting related to robot and cell function, • Travel to customer sites to support tooling installs, open issue resolution, and commissioning support, • Work cross-functionally with Controls and Engineering teams during builds, installs, and troubleshooting activities Experience / Qualifications • High School Diploma or GED required, • Technical School, Vocational Training, or equivalent hands-on experience preferred, • 2–5+ years robotics technician or robot programming experience (higher levels preferred for advanced roles), • Experience working with at least one robot platform (FANUC strongly preferred), • Experience working with welding power supplies, • MIG welding fundamentals and basic machining experience (mills, lathes, grinders), • Basic pneumatic system knowledge, • Ability to read and interpret blueprints and weld prints, • Basic understanding of PLC and HMI interaction with robotic systems, • Basic electrical troubleshooting using voltmeter (AC/DC), • Experience building or supporting robot systems from setup through startup preferred, • Understanding of GD&T, tooling tolerances, and quality adjustment processes preferred, • Willingness to travel approximately 30–40% based on project needs

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION The Rebuild & Repair Technical Support Liaison provides high‑level technical leadership and acts as the central coordination point between internal teams, strategic partners, and customers for all Rebuild & Repair operations. This role ensures clear communication, delivers accurate technical direction aligned with organizational quality standards, and drives the efficient execution of repair programs to uphold product reliability and customer satisfaction. In this capacity, the liaison oversees the full lifecycle of designated Astec products, including installation, commissioning, startup, training, maintenance, troubleshooting, and repair—to ensure optimal system performance. This role also leads training and development efforts for strategic partners and customers, equipping them with the knowledge and best practices necessary to improve operational efficiency, reduce downtime, and enhance the overall customer experience. Key Deliverables · Provide strategic oversight of project quality, operational performance, and budget adherence across all Rebuild & Repair initiatives. · Develop and maintain strong, professional relationships with customers and rebuild facility leadership to ensure alignment and long‑term partnership success. · Serve as the liaison for Rebuild & Repair facilities, ensuring clarity of technical requirements, timely issue resolution, and consistent progress monitoring. · Lead cross‑functional training initiatives for contractors, labor teams, customers, and rebuild facility personnel to strengthen organizational capability. · Ensure reliable startup, commissioning, and operational integrity of all electrical, control, and mechanical systems, including sequencing, interlocking, and calibration. · Oversee advanced operator training programs for customer and facility staff, focusing on startup procedures, troubleshooting, and foundational electrical/mechanical competencies. · Partner with Functional Leadership, Product Support Managers, and administrative teams to ensure accurate reporting, documentation, and billing compliance. · Maintain 24/7 availability to provide urgent technical support whenever critical issues arise. · Direct the development and execution of work schedules for Rebuild & Repair facilities to optimize resource allocation. · Deliver high‑level reporting on project milestones, operational challenges, and facility performance metrics to leadership. · Oversee and guide the installation of equipment and components, ensuring adherence to engineering and safety standards. · Provide high-level support in identifying, diagnosing, and resolving issues across all rebuild and repair sites. Key Activities & Responsibilities · Lead cost management, scope definition, and process development for all Rebuild & Repair operations. · Collaborate directly with the Director of Parts Sales, Sales Representatives, and Rebuild & Repair facility managers to align operational goals with business objectives. · Conduct regular site visits to provide leadership, training, and process optimization for Rebuild & Repair teams. · Develop and validate labor and repair cost estimates for internal and partner facilities to support accurate and competitive sales proposals. · Drive cross‑departmental collaboration with engineering, service, sales, and rebuild teams to enhance efficiency, reduce costs, and accelerate timelines. · Represent Astec Repairs at a senior level, ensuring proactive, transparent communication with internal teams, customers, and rebuild partners regarding equipment status and project progress. · Ensure strict adherence to company policies, procedures, and operational standards. To be successful in this role, your experience and competencies are: · High school diploma or GED required; additional education or equivalent experience considered valuable. · Minimum of 10 years of experience in construction, manufacturing, or a related technical field. · Working knowledge of all Astec equipment, including Shuttle Buggies, Mills, and Pavers · Strong understanding of electrical and electronic circuits, with the ability to interpret mechanical, electrical, and electronic blueprints and schematics. · Working knowledge of circuitry, pneumatics, hydraulics, and power transmission systems. · Ability and willingness to travel extensively—domestically and internationally—on short notice. · Proficiency in using remote diagnostic tools to support on‑site personnel with mechanical, electrical, controls, and operational challenges. · Competence with basic arithmetic and computer applications, including Windows, Microsoft Office, Concur, and CMS Control Systems. · Strong analytical and problem‑solving capabilities. · Hands‑on technical skills including welding (stick and MIG), cutting torch operation, and steel fabrication/assembly. · Demonstrated ability to manage conflict constructively and resolve issues in a balanced, professional manner. · Comfortable working independently or within small teams, with a proven ability to remain productive with minimal supervision. · Ability to build and maintain positive working relationships across diverse personalities, including customers, vendors, colleagues, and leadership. · High proficiency in written communication, technical reporting, and documentation Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success Travel Requirements: All Field Service Technician tiers are 100% of travel, regional, international. These roles will require extensive travel and overtime, including nights, weekends, and holidays. WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description Our MissionBe America’s Best home service company by providing care, growth and opportunity ensuring every team member is happy. Hiller’s 17 locations across 4 states, proudly offers a 100% satisfaction guarantee of high-quality residential home services. With more than 34 years in business, Hiller’s family includes more than 850 Happy Faces, and a fleet of over 600 vehicles. WHY Join HillerAt Hiller, we are committed to investing in our employees to help them reach their full potential. Through the development of trade knowledge and soft skills, our employees can succeed in their career AND family goals. With our core value of CARE and standards that define who we are as a company, you will have the opportunity to build a lucrative and rewarding career. Here are even more reasons to join the Happy Hiller Team!- Our Family Owned & Care Culture- OUR VALUES- Healthy Work/Life Balance- Established Career Paths- Advancement Opportunities- Year-round work – NO LAYOFFS- 401k Plan w/ Company Match- Employee Referral Program- Regular Performance Reviews- Paid Training in our state-of-the-art facility BenefitsMedical, Dental & Vision insuranceLong and Short-term disabilityCompany paid $50,000 life insuranceCompany paid vacationPaid holidaysMedical Flex Spending accounts – Family care Job Responsibilities:Ability to perform all plumbing repairs and replacements to code.Operates back-hoe to dig trenches for installation of septic tanks and drain lines for sewage disposal systemCheck slopes for conformance to requirements, using levels or lasers.Cover pipes with earth or other materials.Connect pipe pieces and seal joints, using welding equipment, cement, or glue.Install or repair sanitary or storm water sewer structures or pipe systems.Install or use instruments such as lasers, grade rods, or transit levels.Grade or level trench bases, using tamping machines or hand tools.Lay out pipe routes, following written instructions or blueprints and coordinatinglayouts with supervisors.Align and position pipes to prepare them for welding or sealing.Dig trenches to desired or required depths, by hand or using trenching tools.Operate mechanized equipment, such as pickup trucks, rollers, tandem dump trucks, front-end loaders, or backhoes.Locate existing pipes needing repair or replacement, using magnetic or radio indicators.Tap and drill holes into pipes to introduce auxiliary lines or devices.Other responsibilities as necessary Knowledge, Skills and Abilities:Experience preferred in installation, maintenance, troubleshooting and correcting diverse plumbing service issues.Can run equipment such as an excavator.Must be able to use a computer tablet, smart phone and read a map or follow GPS. Requirements:A High School diploma or general education degree (GED) required.Able to lift 100lbsA valid driver's license, and approved to drive by Company's insurance carrier. (CDL preferred)Must be willing to work a flexible schedule (including some weekends and call). #HillerSPWe sincerely thank all applicants in advance for submitting their interest in this position. Hiller is an EEOC employer.Applicants will be required to undergo pre-employment drug screens and background checks. Apply today if you have what it takes to be a part of the industry's best team in the home service industry! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under the direction of the Department Production Supervisor and in cooperation with the Team Leader, safely perform a variety of tasks to correctly assemble, fit, and join components in the production process of heavy and large mechanical products, per specifications and in accordance with the production schedule, making independent decisions with minimal direct supervision given appropriate instructions. Key Deliverables • Use tools properly to make or repair parts and products., • Collaborate with other line workers in order to assemble products., • Comply with all company and industry safety requirements., • Accurately interpret documents, such as diagrams, schematics, blueprints, or other verbal or written instructions., • Cleans and assembles component parts, machined parts, and subassemblies, • Uses various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete tasks, • Removes burrs and rough spots from parts with hand file, hone stone, or portable pneumatic grinder, • Operates overhead cranes and forklifts to move parts and materials in and out of work area and to assemble large components, • Performs minor adjustments, repairs, or setups to equipment or machines under supervision, • Perform all required job functions in a safe manner consistent with plant safety standards and report any problems immediately to the team leader or Department Supervisor, • High School Diploma or General Education Degree (GED) preferred, • 0-2 Years Heavy equipment manufacturing experience desired, • Knowledge of commonly used mechanical concepts, practices, and procedures required, • Relevant trade school or college course work desired, • Ability to correctly use and read a tape measure, and read/understand job-related blueprints, required, • Ability to read drawings and blueprints accurately, • Able to operate overhead cranes and forklifts, • Computer experience desired, particularly the ability to use a mouse, and locate and open/close files, • Must be dependable, dedicated to completing work assignments correctly, and use time wisely, • Adept at problem-solving. Adaptable to new situations and challenges. Open to changes and new ideas, • Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and supervision, and ability to work with others respectfully and professionally in a team environment, • Ability to communicate clearly and completely, expressing needs, and asking questions, • Ability to sufficiently carry out detailed written and/or oral instructions, • Ability to handle the demand that accompanies production standards and deadlines None Our Culture and Values Employees that become part of Astec embody the values below throughout their work: • Continuous devotion to meeting the needs of our customers, • Honesty and integrity in all aspects of business, • Respect for all individuals, • Preserving entrepreneurial spirit and innovation Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under the direction of the Department Production Supervisor and in cooperation with the Team Leader, handle materials and expedite parts to proper production locations. Sort, organize, deliver, and store parts and materials as needed and appropriate, in a timely routine manner and in accordance with the production schedule, making independent decisions with minimal direct supervision given appropriate instructions. Key Deliverables · Pull materials that are needed to fill orders. · Develop forms that allow the organization to keep track of all materials. · Load and unload incoming and outgoing materials. · Operate needed equipment to move freight. · Comply with all of Astec’s safety rules and guidelines. Key Activities & Responsibilities · Maintain inventory levels by identifying, labeling, stocking, and recording materials and Supplies · Transport heavy material using a forklift both inside and outside of buildings · Determine production requirements by obtaining work orders · Verify items and quantities on packing slips and receive or ship as necessary · Package materials and parts in various containers for safe shipment to internal and external customers · Communicate with internal customers while responding to material requests · Develop bills of lading (loading) and delivery forms · Locate materials and supplies by pulling and verifying materials and supplies listed on production orders · Cycle count inventory as requested by supervisor · Learn and utilize current inventory computer system · Sort items according to destination and verify all items match with the purchase order · Perform and document daily forklift inspections before operation · Perform and document daily crane inspection before operation · All other duties and responsibilities that are assigned To be successful in this role, your experience and competencies are: · High school diploma or general education degree (GED). · 0-to-1-year related experience and/or training; or equivalent combination of education and experience. · Operating knowledge of Forklift a plus, but not required. · Computer experience desired, particularly the ability to use a mouse, and locate and open/close files. · Adept at problem-solving. Adaptable to new situations and challenges. Open to changes and new ideas. · Ability to satisfactorily work alone with reasonable instructions, training, and supervision, and ability to work with others respectfully and professionally in a team environment. · Ability to communicate, express one’s needs, and ask questions. · Ability to apply commonsense understanding to carry out detailed and written and/or oral instructions. · Ability to handle the stress that accompanies production standards and deadlines. · Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself or others. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Works inside and/or outside performing warehouse functions. Key Deliverables · Receive, unload and place incoming inventory items appropriately I assigned inventory locations. · Maintain clear records on all inventory and stock. · Inspect stock for damages and keep record of damages. · Ensure all safety and hygiene standards are met in the warehouse for shipping and receiving orders. · Place all order in the proper location upon arrival. Key Activities & Responsibilities · Using work and sales order documentation, maintain kit pick list policy. Coordinate and/or pull and stage parts for production, shipping, and service departments. · Loads and unloads materials safely onto or from pallets, trucks, racks and shelves by hand and forklift and/or cranes. · Review work orders for closure and monitor partials and completions. Report shortages immediately to supervisor. Coordinate and/or fills shortages as parts are received into inventory. · Assist in maintaining system location codes. · Conveys materials safely from stores, staged areas, and work centers to designated areas. When required, secures lifting attachments to materials, and safely convey loads to appropriate destinations. · Count, weigh, and records number of units of materials moved or handled to ensure inventory accuracy. · Safely moves and stores WIP and finished goods in appropriate locations. · Mandatory participation required in preparation of and in physical inventory. · Maintains and uses all appropriate PPE · Uses material handling equipment when required · Actively participate in accident prevention and adhere to all safety requirements · As required, assists in other projects. · To be successful in this role, your experience and competencies are: · Must have a high school diploma or general education degree (GED)0 · 0-1 year of experience required. · Working knowledge of Material Control or Warehouse environment is preferred. · Lifting of parts, forklift driving, and operation of cranes are required. · Computer experience required. · Ability to measure, read single part orthographic drawings, extract information utilizing codes, symbols, numbers and data from routings and dispatch schedules. · Must be able to work in a dynamic work environment in which needs are constantly changing with little or no notice. Need to be very flexible and helpful. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success NOTE: This position responsible for certain internal control responsibilities. These internal control responsibilities are verbally communicated to the incumbent and periodic feedback is provided as it relates to the performance of these internal control responsibilities. WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job DescriptionDescription: WARE is one of the nation’s largest and most expansive boiler rental and service companies. A family-owned business founded in 1952, WARE has experienced continual growth for over 70 years. The company culture strongly rooted in service, growth, and generosity sets it apart, with these core values serving as the foundation of the company’s success. With an eye on growth, WARE is seeking a Pressure Vessel Technician in Chattanooga, Tennessee. Job Duties Include, But Not Limited To: • Retube of firetube and watertube boilers, • Code welding, • Some pipe fitting, • Burner retrofits, • Annual Boiler Inspections, • Excellent compensation, • Top pay, plus bonuses based on company success, • Time and a half for hours over 40; double time for Sundays and holidays, • Possible relocation allowance, • Excellent benefits (401K with company match up to $10,000), • Christmas bonus, • Paid vacation and holidays, • Health, dental, vision and disability insurance available Requirements:, • Strong mechanical background, • Industrial maintenance or equivalent skill set, • Some welding experience with the intent to certify in 6G 2” & 6” weld test, • Self Motivated, • Willing to travel

Job DescriptionNow Hiring: Maintenance AssociateLocation: Chattanooga TN Pay: $20 - $24/hour (DOE) Schedule: Monday - FridayWe are seeking a skilled and motivated Maintenance Associate to join our team. This role involves maintaining, repairing, and setting up machinery to ensure smooth operations. If you’re a problem-solver with a strong work ethic and a willingness to learn, this position is for you!Key Responsibilities: • Perform routine maintenance on a variety of machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make necessary adjustments.Qualifications:, • High School Diploma or GED., • Ability to lift 50 lbs. comfortably., • Strong work ethic and ability to perform multiple tasks efficiently., • Problem-solving and decision-making skills., • 2 years of experience preferred (willing to train the right candidate).Preferred Experience:, • Blueprint reading: 1 year, • CNC operation, including lathe and milling machines: 1 year, • Electrical systems: 1 year, • Welding: 1 year, • Groundskeeping: 1 yearApply Now! Contact us at 423-485-3122 or submit your application to start your career as a Maintenance Associate.

Job Description At NPAA, we believe our employees are our greatest strength. We are proud to offer a generous and competitive rewards package, including: • Earned Bonus Structure – attendance bonuses, annual merit increases, and an annual incentive bonus plan., • Time Off & Holidays – 11 paid holidays each year, plus paid time off to support work-life balance., • Health & Retirement – comprehensive health and welfare plans, along with a 401(k)program featuring an exceptional company match., • Career Growth & Recognition – tuition reimbursement, employee recognition programs, and opportunities to grow within the organization. POSITION SUMMARY: Repairs and services mechanical equipment in manufacturing process, laboratories, and offices. POSITION RESPONSIBILITIES: * Perform preventive maintenance and repairs on facility and process equipment, including pumps (mag drive, mechanical seal), grinding mills, valves, compressors, and packaging systems. * Troubleshoot motor control systems and plant instrumentation. * Maintain mobile equipment such as forklifts and aerial lifts. * Maintain infrastructure equipment, including steam generation and cooling/chilling systems, ensuring mechanical compliance with state regulations (fire systems, boilers, pollution control). * Apply fabrication and piping skills, including welding and pipe assembly (preferred). * Participate in safety and site improvement programs. SALARY RANGE: $25.10to$38.23. Compensation for this role is negotiable based on experience and skill set. Additional Competencies: • High School Diploma., • Technical School Certification or 2-3 years’ experience or equivalent combination., • Experience in automation or fabrication required., • Ability to interpret basic mechanical and electrical schematics., • Experience with Welding and Piping Assembly preferred.

Job Description BUILT TO CONNECT At Astec, we believe in the power of connection and the importance of building long-lasting relationships with our employees, customers and the communities we call home. With a team more than 4,000 strong, our employees are our #1 advantage. We invest in skills training and provide opportunities for career development to help you grow along with the business. We offer programs that support physical safety, as well as benefits and resources to enhance total health and wellbeing, so you can be your best at work and at home. Our equipment is used to build the roads and infrastructure that connects us to each other and to the goods and services we use. We are an industry leader known for delivering innovative solutions that create value for our customers. As our industry evolves, we are using new technology and data like never before. We’re looking for creative problem solvers to build the future with us. Connect with us today and build your career at Astec. LOCATION: ABOUT THE POSITION Provides support in all areas of the Human Resources department. Assumes ownership for the successful and compliant execution of the Employee Life Cycle. Deliverables & Responsibilities · Ensure smooth, efficient onboarding process that sets new employees up for success · Manage employee relations issues for assigned client group through effective conflict resolution management and investigations, and maintain comprehensive records · Training and development tracking for assigned client groups to ensure the organization’s workforce is knowledgeable for achieving company goals and is compliant with applicable laws and regulations for Astec’s industry standards. · Performance Management and Succession Planning oversight for incumbent’s assigned client groups. · Monitor, track, and implement change management plans for employee engagement and satisfaction for assigned client groups. · Ensure smooth offboarding of exiting employees within client groups that are compliant with Federal, state, and local labor practices. · Ability to improve current HR processes to enhance HR efficiency and the employee experience for assigned client groups. · Be the liaison for the hiring process with the recruitment team and hiring managers to ensure that vacant positions are filled in a timely manner using Astec’s interview practices and procedures, coordinate new hire orientation, liase with Astec’s HR COE’s to ensure employees are onboarded smoothly. · Responsible for the management and compliance of the Astec 30-60-90-day onboarding program to ensure new employees are receiving a world-class employee experience and to be proactive of any opportunities that will assist in higher levels of engagement and employee satisfaction within assigned client groups. · Work collaboratively with assigned client group managers to develop and implement specific employee programs, policies, processes, and systems · Conduct the HR portion of new hire orientation and provide new employees with a positive first impression of the organization, core values and organizational culture · Act as a liaison between employees and management in assigned client group to address workplace issues to ensure a positive work environment is maintained. This may include handling employee concerns and conduct employee investigations when needed to assist in maintaining a respectful and collaborative work environment. · Maintain compliance with federal, state, and local employment laws and regulations, and recommended best practices; reviews policies and practices to maintain compliance · Collaborate with the assigned client group leadership, talent acquisition, recruitment agency and organizational development to understand the skills and competencies are clear for filling vacant positions · Oversee the performance review process for assigned client group managers on effective feedback, and supporting employee growth through performance management systems. · Maintain knowledge of trends, best practices, regulatory changes, and new technologies in human resources, talent management, and employment law · Collaborate with EHS team to ensure that all employees in assigned client group always follow Astec Safety Rules, OSHA and Federal regulations, and are held accountable in a fair and consistent manner when policies, procedures and regulations have been breached · Partner with group leadership to create, implement and ensure employee engagement programs and initiatives are taking place to maintain and improve employee satisfaction. · Actively support Astec’s core values, mission statement and vision statement. · Assume other special activities and responsibilities as directed To be successful in this role, your experience and competencies are: · Associate’s or bachelor’s degree in HR, business, or a related field · Minimum of (2) years of Human resources experience in a manufacturing environment · PHR or SHRM-CP Certification preferred. · Knowledge of laws and regulations governing Human Resource functions · Proficiency with personal computer and Microsoft Office Suite software applications · Proven ability to manage time and prioritize responsibilities effectively to maintain own work-life balance for self and work-life balance of the team 1 year of experience in addressing employee concerns through thorough and fair investigation procedures · Experience using Oracle HRIS System(s) · Experience using PowerBi to create data dashboards for People Metrics · Demonstrated experience in applying conflict resolution skills to effectively resolve workplace issues · Ability to communicate effectively and reach a diverse, multigenerational workforce · Strong analytical and problem-solving skills coupled with the ability to change tasks as needed · Proven ability to work collaboratively in a team, not afraid to challenge the status-quo, and provide feedback to the leaders in assigned client group and members of HR team in professional and respectful manner · Skilled in inspiring buy-in and support for new initiatives to enhance employee engagement within a transforming work culture · Ability to interpret, communicate, and enhance workplace policies · Ability to exercise a high level of independent judgement on a customary and regular basis · Proven ability to deliver engaging presentations and facilitate discussions effectively in workplace settings · Ability to interpret people data to identify and forecast future trends to assist assigned client groups in data driven decision making · Prior training in continuous improvement and problem-solving methodologies · Prior experience in effective organizational communication using digital technologies in the workplace. · Proven track record of managing project and implementing HR programs. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success Travel Requirements: % of travel, regional, international NOTE: This position responsible for certain internal control responsibilities. These internal control responsibilities are verbally communicated to the incumbent and periodic feedback is provided as it relates to the performance of these internal control responsibilities. WORK ENVIRONMENT Office While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Role : Field Service Technician I Location: Open / Remote & Travel Full-time About the Role We are seeking a dependable and motivated Field Service Technician I with a strong electrical background who is willing to travel extensively and learn Astec’s asphalt plant processes and control systems. This role is responsible for supporting the installation, startup, operation, maintenance, and troubleshooting of client equipment at customer sites. The technician will work closely with engineering, service leadership, and customers to ensure successful equipment performance and high customer satisfaction. This is a highly hands-on, travel-intensive position suited for individuals who enjoy field work, problem-solving, and working independently. Key Responsibilities • Support installation, commissioning, and startup of Astec equipment under the guidance of senior technicians, • Perform troubleshooting, maintenance, and repair of electrical, electronic/control, and mechanical systems, • Ensure proper sequencing, interlocking, calibration, and application of control systems, • Conduct on-site training for customer personnel on startup, operations, troubleshooting, and maintenance basics, • Generate accurate daily field service reports and documentation, • Coordinate with engineering, manufacturing, sales, and product support teams regarding technical issues, warranties, and design improvements, • Assist with identifying and resolving equipment or process issues, • Be available for emergency service dispatch as required, • Maintain a professional, customer-focused attitude at all times Required Qualifications • High school diploma or GED (technical training or related education is a plus), • Min 2 years of experience in construction, manufacturing, industrial service, or related fields, • Strong electrical fundamentals – ability to work with electrical and electronic circuits, • Ability to read and interpret electrical, electronic, and mechanical schematics/blueprints, • Knowledge of circuitry, pneumatic, hydraulic, and power transmission systems, • Strong analytical and troubleshooting skills, • Comfortable working independently and in small teams, • Strong written and verbal communication skills, • Proficiency with basic computer applications (Windows, Microsoft Office), • Willingness and ability to travel 100% Preferred Qualifications • Exposure to asphalt, concrete, combustion, or heavy industrial equipment, • Experience with welding (stick/MIG), cutting torch, or steel fabrication, • Familiarity with industrial control systems, • Experience working in field service or customer-facing technical roles Travel Requirement • 100% travel required Work Environment • Manufacturing and industrial field environments, • Exposure to machinery, electrical systems, tools, welding operations, weather conditions, dust, fumes, and noise, • Use of PPE and adherence to safety procedures is mandatory

Job DescriptionDescription: Sherman + Reilly is strengthening its prototype capabilities to accelerate new product development and provide our customers with rapid, innovative solutions. To support this effort, we are looking to add an Engineering Prototype Specialist to our team. The Engineering Prototype Specialist is responsible for the hands-on fabrication, assembly, testing, and refinement of prototype products. This role requires a highly skilled individual who can interpret engineering designs, collaborate with cross-functional teams, and provide valuable feedback to improve product development. The ideal candidate will have strong mechanical, electrical and hydraulic aptitude, excellent problem-solving skills, and experience working in a prototype or R&D environment. Work Environment We rely on our team to exercise good judgment, common sense, and strong technical aptitude in making ethical and well-informed decisions. • We believe in total openness on all issues, that issues are best resolved by direct interaction between people, regardless of different organizations or various levels of responsibility., • Inspiration can stem from anywhere; we believe in supporting creative thought and an openness to innovative ideas and concepts. Build, assemble, and modify prototype components and systems based on engineering drawings, CAD models, and specifications. • Collaborate closely with design and manufacturing engineers to provide feedback on manufacturability, functionality, and design improvements., • Utilize a variety of hand tools, power tools, CNC fabrication equipment, and testing instruments to create and validate prototypes., • Perform functional and performance testing of prototypes, documenting findings and suggesting refinements., • Assist in troubleshooting mechanical, electrical, pneumatic and hydraulic-related issues during prototype development., • Maintain a clean and organized prototype shop, ensuring proper inventory of materials and tools., • Support the transition from prototype to production by working with manufacturing teams to refine assembly processes., • On Site – 400 W. 33rd Street, Chattanooga, Tennessee., • Monday – Friday; 8:00 – 5:00, • 401(k) plus matching, • Health, dental, vision, and life insurance, • Employee Assistance Program, • Paid Time Off, • Profit based yearly bonus Requirements: Required Education and Skills • At least 2 years of hands-on experience with fabrication methods such as welding, fiber laser cutting, and CNC press brake bending, • High mechanical aptitude, • Must be proficient in GMAW and pass the S+R standard weld test, • Proficiency in reading engineering drawings, schematics, and CAD models, • Strong troubleshooting and problem-solving skills, • Familiarity with various materials, including metals, plastics, and composites, • Ability to work independently and as part of a team in a fast-paced development environment, • Excellent communication and documentation skills, • Experience operating a forklift, fiber laser, brake press, and use of hand/power tools, • Lift up to 50lbs., • Use of hand tools such as wrenches, hammers, impact drivers, drills, and other common tools, • Climb on and off mobile equipment to access mechanical and electrical components, • Able to stand for extended periods of time while wearing appropriate safety gear and wearing steel toed boots, • During prototyping and while assisting the operations team you will be in a factory environment with load noises, dangerous tools and equipment, moving objects, dangerous fumes, and other personal to be mindful of