Welding jobs in Denver, ColoradoCreate job alerts

Please note, this position is located at Winter Park Resort in Winter Park, CO. Year Round Who We Are: At 67 miles away, Winter Park is the closest ski resort to Denver. With easy access to 765,000 acres of public land, Winter Park is home to endless adventures. Whether you are looking to have your first taste of a winter season or to build a long-term career, we have something for everyone. Perks & Benefits: • Free season pass to Winter Park and all Alterra Resorts, • Discounted friends & family tickets, • Medical, dental, vision, life, paid parental leave and more for eligible employees, • 401(k) plan with 100% company match - up to 4%, • Mental health resources for all employees, • Food & beverage and retail discounts, • Onsite employee childcare based on availability, • Discounted equipment rentals, pro-deals, and more POSITION SUMMARY: The Vehicle Mechanic's primary responsibilities are to repair, service, recondition, overhaul and maintain vehicles, equipment, and their components in the Winter Park Fleet. Follows consistently Winter Park/ Intrawest policies and procedures. You may be placed in Heavy Equipment Mechanic, Auto & Truck Mechanic, or Small Equipment Mechanic. WAGE: The base hourly pay range below represents the low and high end of Winter Park Resorts' hourly pay range for this position. Actual pay will vary and may be above or below the range based on various factors including but not limited to experience, education, training, location, merit system, quantity or quality of production, responsibilities, and regular and/or necessary travel. The range listed is just one component of Winter Park Resorts' total compensation package for employees. Other rewards may include many region-specific benefits. Hourly pay range: $24 - $26 DOE ESSENTIAL DUTIES: • Perform inspections, maintenance, and repairs as assigned by Equipment Shop Foreman/Fleet Maintenance Foreman., • Assist Master Mechanics as assigned by Equipment Shop Foreman/Fleet Maintenance Foreman., • Safely transport vehicles or equipment to the shop., • Estimate expected repair time and costs., • Complete work orders and other paperwork; repairs., • Notify the appropriate department upon completion of repairs., • Wear safety equipment., • Maintain a clean and orderly workstation (shop)., • Report and correct, if possible, unsafe conditions of vehicles, equipment, or shop., • Complete work promptly with demonstrated attention to detail and accuracy., • Maintain a friendly, congenial, and helpful attitude while effectively dealing with guests and other employees., • Perform other duties as directed., • Assist vehicle and equipment users with mechanical and operational procedures., • Assist Foreman with paperwork., • Update scheduled maintenance tags or notices., • Keep current and well-informed on related topics in the field of vehicle/equipment maintenance. This job description is an overview of the scope of responsibilities and is not intended to be an inclusive list of job tasks and expectations. With the evolution of this resort and position, the responsibilities of this position may change. EDUCATION & EXPERIENCE REQUIREMENTS: Education: • High school diploma or GED Experience: • One-year formal training or demonstrated skill in any of the following:, • auto mechanics, • diesel mechanics, • auto electrical systems, • hydraulics, • test equipment, • basic welding, • Two years on the job experience in any or all of the above. QUALIFICATIONS, KNOWLEDGE, SKILL, AND ABILITY REQUIREMENTS: • Current First Aid card is desirable, • Must be able to operate a motor vehicle, • All shop tools, equipment, and testing instruments, • Computer analyzers, • All area vehicles and equipment, over-snow vehicles, wheeled vehicles, chainsaws, and pumps, • Gasoline and diesel engines, • Power and hand tools, • Arc and gas welder, • Cutting torch, • Paint sprayer, • Precision and electrical instruments, • Work order forms., • Earplugs, hearing protection PHYSICAL DEMANDS AND WORKING CONDITIONS: This position may be required to work evenings, weekends, and holidays. • Stand, over 2/3 of the time., • Walk, 1/3 to 2/3 of the time., • Sit, less than 1/3 of the time., • Move up to 75 lbs., 1/3 of the time (tracks, parts, oil barrels)., • Carry 50 lbs. less than 1/3 of the time (parts)., • Push/pull up to 75 lbs, 1/3 of the time., • Climb/hike, less than 1/3 of the time (ladders, stairs to parts room)., • Balance on icy terrain, less than 1/3 of the time (outside repairs)., • Stoop/kneel/crouch/crawl, over 2/3 of the time (repairs)., • Reach/handle/finger/feel, over 2/3 of the time (small and large tools, parts)., • Talk, • ordinary, more than 2/3 of the time, • over loud noise, 1/3 of the time, • ordinary, more than 2/3 of the time, • over loud noise, less than 1/3 of the time, • Vision, • average acuity/near, over 2/3 of the time, • average acuity/far, less than 1/3 of the time OTHER DUTIES AS ASSIGNED: This position description is an overview of the scope of responsibilities for the role described above. With the evolution of Winter Park Resort, the responsibilities of this position may change as may the dates associated with many of the tasks. During these times of change, this position requires the flexibility and willingness to accept new responsibilities and potentially transfer others. It will also be the responsibility of any employee of Winter Park Resort to be a positive influence on the transformation of the resort and its associated lines of business. AN EQUAL OPPORTUNITY EMPLOYER: Winter Park Resort is an Equal Opportunity Employer and is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. Application Deadline:Recruiting timelines vary by position, however, all Winter Park Resort positions accept applications for a minimum of 3 business days from the posting date listed above. This position is open and still accepting applications.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. • Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment, • Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision, • Journeyman electrical license a plus, • Requires the ability to make low and high voltage repairs to all building electrical equipment, • This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices, • You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors, • Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions, • Schedules are bid and awarded according to seniority, • Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT), • Salary increases will be administered according to the current IBT/United contract, • New employees are required to join the union within ninety (90) days of employment, • There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge, • Twenty-Four months experience required in at least three of the following areas:, • Electrical (including 480 volt, 3 phase), • Structural (including steel frame construction), • HVAC (including building management systems), • Mechanical (including conveyors), • Plumbing, • PLC electronic/computer controls, • Must have completed high school diploma, GED or equivalent, • Ability to maintain and repair all building disciplines, heavy mechanical and welding, • Work may be indoors or outside or in elevated areas anywhere on airport, • Must be able to climb and work from ladders, and/or walk for extended periods, • Moderate lifting, • Must possess sufficient tooling to perform required tasks, • Computer experience for input and retrieval of data, • Qualified candidates must be immediately available for full time employment, • Must possess a valid, clean, applicable state driver's license The starting rate for this role is $32.65. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact ___ to request accommodation.

This position is an essential part of Sherwin’s manufacturing team. This position is responsible for installing, troubleshooting, repairing, and maintaining production and facility equipment to support production requirements and goals. Equipment may include: dryers, chillers, thermal oxidizer, HVAC, fire pump, mixers, mills, filling line equipment, conveyors, wrappers, tanks, motors, pumps, tank washers, tank tipper, as well as dock and building maintenance, etc. This position performs various maintenance tasks as assigned and is responsible for maintaining a safe, clean, and productive working environment. Shift: Monday - Friday 8:00 am - 4:30 pm 5% Travel This position is eligible for health benefits, such as medical, dental and vision coverage, Flexible Spending Accounts (FSAs), disability coverage, security, retirement and saving benefits, and more. Additional benefits include a generous time away from work package, including personal leave, paid parental leave, medical leave, vacation, holidays, among other benefits. At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at ___. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Perform preventive maintenance inspections and service on equipment, • Repair broken machines and equipment quickly and efficiently, • Identify causes of unexpected breakdowns of machines, • Record and report damaged, worn, or broken parts, • Order and install replacement parts for machines, • Assist in electrical projects and perform minor electrical repairs, • Assist in pipe fitting tasks and perform some installation unassisted, • Maintain and service building equipment including HVAC, lighting, water and sewer, etc., • Maintain documentation as required, • Clean, organize, inventory, stock, and otherwise maintain shop areas, parts, tools, and supplies, • Coordinate with managers to schedule regular maintenance on machines, • Maintain technical knowledge through training Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Have at least two (2) years of work experience as a mechanic in a manufacturing and/or distribution environment, • Have an industrial, electrical, and/or welding certification or license, • Have at least one (1) year of maintenance experience applying electrical, hydraulic, and pneumatic concepts, • Have at least one (1) year of work experience implementing Programmable Logic Controls ("PLC")

New Hire Incentive Bonus! UniFirst’s Aurora, CO location is now offering an incentive bonus of $5,000 for new hires. The following guidelines must be met to be eligible: • New hire must reach 180 days of employment to receive the full incentive bonus., • New hire must abide by UniFirst’s 90-Day Probationary Period. This includes meeting UniFirst’s attendance and performance policy. What’s in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. Compensation: $28.93 - $39.15/hr What you’ll be doing: • Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments., • Assist other maintenance personnel with emergency and non-emergency repairs., • Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems., • Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications., • Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required., • Perform daily and weekly safety checks on boilers and make necessary repairs as required., • Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures., • Performing basic welding activities to effect repairs on facilities and equipment., • Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual., • Utilize a Computerized Maintenance Management System., • Perform other duties as assigned by leadership. Qualifications What we’re looking for: • High school diploma or GED equivalent required., • Two-year technical degree in an appropriate background is preferred., • Must be at least 18 years of age., • Knowledgeable in industrial maintenance of facilities and equipment., • Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered., • Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment., • Ability to read blueprints and schematics is required., • Ability to read and understand maintenance literature printed in English required., • Basic computer and Microsoft Office skills is required., • Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver’s license and a safe driving record are required. • Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. There is no application deadline for this role. Please note, applications will be accepted until the position(s) are filled. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: up to $45/hr, • Sign on Bonus: Up to $7,500.00 and relocation available depending on experience, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Provide support on construction job by piping cooler boxes and refrigeration cases, including electrical wiring as required to complete the project., • Provides the required installation of pipe hangers as directed by the foreman., • Provide construction support by welding and slip-hosing copper pipes, and assist the foreman as needed on the job., • Provide support by handing cooler box coils and installing new supermarket refrigeration systems or remodeling existing supermarket refrigeration systems., • Perform other duties and projects as assigned. Qualifications:, • High school diploma or GED equivalent work experience and trade or technical school classes, • 3+ years of experience in the construction industry preferred and hands-on field experience in commercial refrigeration, electrical and/or fixtures construction, • EPA Certification (Type II), • Experience in copper brazing, market remodeling, • Good driving record., • Knowledge of electrical systems and ability to wire installations., • Knowledge of carpentry., • Knowledge of refrigeration systems and piping of refrigeration equipment., • Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment., • Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing., • Ability to hang evaporation coils and install overhead hangers., • Ability to use hand and power tools and good mechanical skills., • Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance. Connect with us on ___ and ___. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Journeyman-HVAC, Journeyman-EMS, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, pipefitter

Job Description We are seeking an Ornamental Steel Fabricator to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload

Job Description Journeymen Ironworker needed for various Commercial projects in the Brighton, CO area. You will be bolting, welding, and decking all commercial steel. There can/will be a height exposure from single up to 5 stories, no groundwork. You will be working with some aerial lifts and mainly off Iron with beamers and harnesses supplied. This is a temp with possible permanent placement for the right hands. After probation period benefits include Health Insurance with 70% paid (individual plan), 401k with up to 4% match, PTO includes 1 week your first year and 2 weeks after 5 years, work truck after 30 days, and a Safety bonus at the end of the year. You may be required to pass a pre-employment drug test and background check upon arrival. Paying up to $32/hr Per Diem: None Duration: Temp to Perm 45 Hours a Week Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888-230-9908 Fax: 888-230-9909 Company DescriptionWe believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job Description Monarch Metal Manufacturing is currently seeking a full time job shop welder. • Review the production routing and product blueprints for each production run., • Create fixtures to aid in welding of parts., • Check the first part against drawing for dimensions., • Make the production run according to instructions, checking the product quality., • Maintain equipment and work area in a clean and orderly condition., • Perform other duties as assigned., • Must be able to lift 50lbs Position requires previous experience in this field. Ability to learn and attendance are crucial. Must pass a weld test. Required Skills: Tig / Mig Welding Steel, Stainless Steel, Aluminum Caliper Reading Tape Measure Reading Blueprint Reading Monday-Thursday (4-10's) Friday-Sunday off. $22-$26 DOE Powered by JazzHR qchiCv0VNH

Job DescriptionJob Title: Welder Fabricator Location: Littleton, CO Join a Team That’s Reinventing Infrastructure – One Weld at a Time At Insituform Technologies, we’re not just welding parts — we’re helping rebuild critical infrastructure across the country. As a Welder Fabricator in Littleton, CO, you’ll play a key role in creating custom equipment that supports safer, cleaner, and more sustainable pipeline solutions. Your craftsmanship directly impacts the communities we serve—protecting water systems, minimizing waste, and reducing disruption to everyday life. Insituform is a recognized leader in trenchless pipe rehabilitation. We specialize in cured-in-place pipe (CIPP) and other no-dig technologies that breathe new life into aging pipelines — without the mess, cost, or disruption of traditional methods. As part of Azuria Water Solutions, we’re proud to offer forward-thinking solutions that combine hands-on expertise with a passionate approach to sustainability, innovation, and infrastructure resilience. We are currently offering a limited-time sign-on bonus of $4,000 for new hires with a valid CDL license, and sign-on bonuses for new hires without a current CDL license are also available at a reduced amount. New employees who meet the criteria outlined in our sign-on bonus program will be eligible for the full payout. The pay for this position starts at $30.00 per hour and will increase based on experience. Why You’ll Love Working With Us: • Competitive wage of $30 per hour starting pay, • Comprehensive medical, dental, vision & prescription drug coverage, • 401(k) with company match, • Tuition assistance to invest in your growth, • Paid time off, overtime pay, and paid on-the-job training, • 100% company-paid PPE, boots, and safety gear, • Opportunities for career advancement in a forward-thinking company, • Be part of a sustainable mission – we’re rehabbing the world’s infrastructure with minimal waste and disruption What You’ll Do:, • Fabricate and weld a variety of structural components by interpreting blueprints, technical drawings, and detailed work orders to ensure precision and quality., • Operate a wide range of fabrication tools and heavy equipment, including saws, torches, plasma cutters, and grinders, while adhering to safety protocols., • Carry out rigging, lifting, mechanical assembly, and painting tasks as part of large-scale equipment projects, ensuring each component is built to spec., • Repair both mechanical and electrical issues on machinery, using diagnostic tools and technical knowledge to restore functionality efficiently., • Construct and install complex electrical systems, including the wiring of components, conduit runs, and control panels, ensuring proper function and safety compliance., • Maintain detailed documentation of daily tasks and project progress by completing work orders, reports, and time logs with accuracy and consistency., • Provide hands-on support to field crews by addressing mechanical/electrical problems with equipment used in pipeline rehabilitation operations., • Safely move, position, and install large parts, frames, and assemblies using appropriate lifting techniques and equipment to prevent injury and damage., • Conduct general maintenance and repairs on shop machinery and tools to keep equipment in top working condition and avoid downtime. What We’re Looking For:, • High school diploma or GED (technical school a plus), • 3+ years of hands-on welding/fabrication experience, • Utility construction and mechanical experience preferred, • Ability to read blueprints and fabrication drawings, • Proficiency with fabrication tools: saws, grinders, mills, lathes, etc., • Ability to lift up to 50 lbs. regularly (up to 75 lbs. occasionally)

Job Description This position is located in Laramie, WY and will require candidates that have been offered the position to relocate to the surrounding area. WyoTech is seeking experienced motorsports chassis fabricators to join our team as instructors at our Laramie, WY campus. This is a unique opportunity for skilled professionals who are ready to mentor and teach the next generation of technicians. No prior teaching experience is required, just a passion for your craft and a desire to share it. Instructors work alongside Lead Instructors and may also teach independently. If you're ready to bring your real-world knowledge into the classroom and support our mission of Best Training. Best Experience. Best Outcomes. Please apply! We’re always on the lookout for talented individuals to join our team, both on campus and across the U.S. If you don’t see a current opening that’s the right fit, we encourage you to apply anyway. Qualified applicants will be considered for future opportunities, and we’ll keep your resume on file for roles that match your experience and skills. Minimum Qualifications Candidates must meet state certification, regulatory agencies, and accrediting body requirements, including but not limited to: • 5+ years of experience in the high-performance automotive industry, with a focus on restoration, customization, and chassis fabrication, • Proven expertise in precision welding, including both MIG and TIG techniques, applied in motorsports or custom builds, • Strong working knowledge of suspension systems, steering geometry, tubular frame construction, and overall chassis design, • Tech-savvy and computer proficient, with the ability to quickly adapt to industry-specific software used in an educational or technical setting, • Hands-on experience with classic vehicles, custom trucks, race cars, or other performance-focused builds, • Advanced skills in metal shaping, fabrication, minor machining, and working with a variety of metals and materials, • A collaborative mindset with a positive, team-oriented attitude in a shop-floor environment, • Willingness and ability to learn and apply software tools related to chassis design, blueprint interpretation, or fabrication planning Duties and Responsibilities • Adhere to and ensure the enforcement of WyoTech policies and procedures as stated in the Employee Handbook; Advise students on attendance, grades, professionalism, and personal problems to ensure completion of their career program, • Submit grades, tests, attendance, and all other material; Plan class instruction based on the syllabus and ensure learning objectives are met. Ensure all educational activity is conducted ethically and legally; Utilize the CANVAS LMS system, • Support EPA and safety procedures; Encourage students to do safe, quality work with safety precautions, • Maintain and attend to the repair, as necessary, of class equipment and tool inventory, • Attend scheduled instructor meetings, graduation, and registration; Participate in curriculum and professional development; Communicate effectively with all WyoTech faculty and staff, • Encourage motivation and enthusiasm in the shop and classroom; Develop a professional rapport with the students, • Prepare adequately for class and shop before start time; Have supplemental teaching items ready; Provide appropriate information, resources, and assignments for a lesson; Provide peer tutors as needed, • Monitor class; Remain in control of the class throughout the classroom lesson and in the shop, • Follow ADA Requirements, • Be available for students 15 minutes before and 15 minutes after the scheduled class time, • Always maintain security on all tests and lesson plans; Always maintain confidentiality, • Work with students to make a difference in their lives, • Work with a great company that supports not only its staff but the community as well, • Team building, • Tuition reimbursement, • Competitive benefit package, • PTO and paid holidays, • 401K, • Health insurance - vision and dental included Applicants who are offered an appointment are required to pass a comprehensive background investigation and driver's license check. Salary Description $62,500.00-$90,000.00 Company DescriptionWe are a school that offers world class training in the Automotive, Collision, and Diesel industries along with our specialties programs Street Rod, Motorsports Chassis Fabrication, High Performance Power Trains, Trim & Upholstery, and Applied Service Management, Our company has an excellent reputation among students, alumni, and employers of our graduates. We are locally owned and led by people who are dedicated to working hard, having fun, and doing right by our customers and each other. Applicants who are offered an appointment are required to pass a comprehensive background investigation and driver license check.We are a school that offers world class training in the Automotive, Collision, and Diesel industries along with our specialties programs Street Rod, Motorsports Chassis Fabrication, High Performance Power Trains, Trim & Upholstery, and Applied Service Management, Our company has an excellent reputation among students, alumni, and employers of our graduates. We are locally owned and led by people who are dedicated to working hard, having fun, and doing right by our customers and each other.\r\n\r\nApplicants who are offered an appointment are required to pass a comprehensive background investigation and driver license check.

Job DescriptionPosition Overview The Pipe Welder plays a critical role in the fabrication team, performing precision welding and fitting that ensures piping systems and pressure vessels meet strict safety and quality standards. This position requires the ability to interpret blueprints, execute quality welds, and deliver consistent results in a fast-paced shop environment. This role offers the chance to work with advanced tools and processes, gain expertise in ASME code welding, and contribute directly to the durability and reliability of complex mechanical systems. Key Responsibilities * Read and interpret P&IDs, weld symbols, and technical drawings to set up and complete weldments. * Perform high-quality welds on piping and ASME pressure vessels, including X-ray quality standards. * Operate welding machines, rotators, overhead cranes, and other material-handling equipment. * Fit and assemble joints accurately, applying shop techniques for rotator welding. * Work in accordance with ASME codes such as B31.1, B31.3, and B31.9. * Conduct preventative maintenance on welding machines and evaluate equipment performance. * Identify and report defects or issues in welds and materials. * Provide guidance and support to junior welders and laborers when needed. * Track production progress, assist supervisors with order status, and maintain accurate records. * Keep the work area clean, safe, and organized at all times. * Carry out additional duties as directed by shop leadership. Qualifications * Minimum 5 years of general trade experience, with at least 3 years dedicated to welding. * Successful completion of a 6G FCAW weld test required; additional proficiency in SMAW, GTAW, and pulse processes preferred. * Skilled in MIG, ARC, and TIG welding with knowledge of metallurgy and mechanical techniques. * Hands-on experience welding with rotators and performing proper fit-up. * Familiarity with pipefitting tools such as two-hole pins, pipe wraps, and center finders. * Strong blueprint reading and layout abilities. * Effective communicator with good judgment and initiative. * Must provide own set of hand tools within 60 days and achieve production goals within 90 days. * Ability to work independently with minimal supervision. Physical & Work Requirements * Ability to work indoors, outdoors, and in dusty, noisy, or confined environments. * Capable of climbing, balancing, kneeling, crouching, and working in all weather conditions. * Able to lift and move up to 50 lbs. as required. * Knowledge of trade materials and tools essential. * Commitment to following all company safety practices, policies, and procedures. * Required safety training includes OSHA 10, CPR, and related health/safety certifications.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Denver, CO. Most positions are first shift with a pay scale of $22-40/hour based on experience & skill level with Travel Work Available. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Air Arc, • Repair Welding, • Pipe & Mechanical, • 2+ Years of Experience in the Field, • Basic Tools for the Trade, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job DescriptionDescriptionThe Pipe Welder is a key contributor in our fabrication team, specializing in high-quality welding and fitting work that ensures the structural integrity and performance of critical systems. This role brings advanced technical skill to every step of the process, from blueprint interpretation and setup to producing X-ray quality welds.You'll work alongside experienced professionals using state-of-the-art equipment, with opportunities to expand your expertise in ASME pressure vessels, piping, and precision welding. Whether you're aiming to lead teams or become a recognized specialist, this role builds a solid foundation for your career.Qualifications • 5 years of general experience, 3 years of welding experience preferred., • Prior successful completion of a 6G FCAW weld test required before hire., • Must pass 6G FCAW weld test within one week of hire (FCAW, SMAW, GTAW, pulse preferred)., • Familiar with welding on rotators and corresponding fit-up., • Experience with MIG, ARC, and preferably TIG welding processes., • Knowledge of metallurgy and mechanical welding techniques., • Familiarity with pipe trade tools (e.g., Two-Hole Pins, pipe wraps, center-finders)., • At 60 days: must have own set of hand tools., • At 90 days: must meet production goals., • Minimal supervision required; able to coordinate own tasks., • Excellent written and verbal communication skills., • Good judgment and initiative in resolving issues.

Job Description We are seeking a Pipefitter Welder to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics

Job Description POSITION DESCRIPTION POSITION TITLE Welder I LOCATION Denver, CO MANAGER Welding Supervisor POSITION TYPE COMPENSATION Non-Exempt $26.96 Our Values Make it Safe Customer Driven Best People Smarter, Faster Family Culture Make it Happen Our values are embedded in our organization and form the basis of our business planning, recruitment processes, training, and leadership. Birdon is a diversified global group of companies supplying whole of life solutions to the maritime, military, infrastructure, and resource sectors. We deliver value for our customers through our innovative people, organizational agility, and operational excellence. Main Duties and Responsibilities • Produce welded assemblies from fabricated components per custom or stock specifications., • Welding in a variety of metals using a combination of MIG, TIG, and ARC welding techniques., • Positions, aligns, fits and welds parts using common weld shop tooling (jigs, welding equipment and hand tools)., • Verifies conformance of workpiece to specifications, using square, ruler and measuring tape., • Owning and using own set of tools as required by the program., • Understanding proper safety and abiding by all quality rules instructed., • Resolving problems using established procedures and common sense., • Creating solutions, procedures and policies while working with various departments., • Intermediate understanding of assigned work order/stage requirement and goals QUALIFICATIONS & ATTRIBUTES ESSENTIAL DESIRABLE High School Diploma or GED Minimum 1 year experience in welding environment Intermediate ability to interpret blueprints and schematics, recognizing welding symbols and specifications. Successful completion of certification to minimum of 2 WPS Basic Math skills and Mechanical aptitude. Must have excellent attendance. Ability to use hand and power tools Ability to work in limited spaces Strong communication skills and effective at building relationships at all levels Energetic, motivated and goal oriented. Works well in a fast paced, team environment Focus on detail and accuracy in all efforts. Quick learner and resourceful Prior experience in a small organization, demonstrating abilities with multiple objectives and multitasking efforts. WORKING CONDITIONS • Working conditions are normal for a manufacturing environment where exposure to moving mechanical parts, sharp cutting tools, dust, fumes and airborne particles, temperature extremes and elevated noise level., • Employees must regularly lift and or move up to 25 pounds and frequently lift and or move more than 75 pounds., • While performing the duties of this job the employee is regularly required to strand, stoop, kneel, climb, crouch, talk and hear., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus., • Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protection and work boots. Birdon offers a full benefits package including: • Health/Dental/Vision, • EAP, • Life, • STD/LTD, • 401(k) with company match (pre- and post-tax options), • Vacation/Sick accrual and holiday pay, • Tuition reimbursement program, • Employee referral program RELATIONSHIPS This position is based in Denver, CO, Bellingham, WA, Portland, CT, or Elmwood, LA and will report to the Welding Supervisor. Birdon’s senior management team, including Divisional Managers, may provide additional direction and duties from time to time. Clear communication and interpersonal skills are necessary as direct contact with Birdon clients, prospective clients, and production team is an important aspect of this position. It is your responsibility to ensure that the Company’s values and interests are maintained during all internal and external communications.

Job DescriptionDescription: We are looking for a Dock and Door Construction Assistant to join our team at Wize Solutions. You’ll collaborate with experienced foremen to install cutting-edge dock equipment, from advanced hydraulic levelers to high-speed doors for truck loading docks. We’re looking for someone who enjoys working with their hands, developing new skills, and making an impact with every project. This role offers the perfect opportunity to grow your career while working in a supportive, high-energy environment. Requirements: Who You Are: • You have a positive attitude and approach each challenge with a growth mindset, enjoying the opportunity to learn and develop new skills., • You are a problem solver, eager to contribute directly to installing and repairing dock equipment for the construction team at Wize., • You are detail-oriented and understand that attention to the minor details in construction can lead to impactful improvements, both on-site and in-process development., • You are adaptable and comfortable finding solutions to business challenges, whether they arise on-site or in customer interactions. You communicate your findings effectively in both written and verbal form., • Assist the foreman in daily tasks, including installing and repairing equipment such as levelers, dock seals, and shelters., • Operate forklifts and various construction tools, ensuring safety protocols are followed., • Complete safety training to stay compliant with industry standards, including OSHA certifications., • Assist with welding and reading electrical schematics to aid in the setup of complex equipment., • Reliable transportation AND a valid driver’s license are required, as the position demands punctuality and occasional travel. Flexibility in scheduling and dependable attendance are essential., • Ability to lift 40 lbs. daily and operate construction equipment., • OSHA 10-hour Certification (or willingness to obtain within the first few months of employment)., • Minimum of 1 year of construction experience (preferred)., • Health, Dental, and Vision Insurance after 30 days., • Paid Holidays and paid sick days., • Overtime pay and opportunities for wage increases with completed certifications.

Job Description Welder II *MUST BE A US CITIZEN SUMMARY: Welder II is responsible for reading and interpreting shop drawings and travelers to layout and fabricate complex metal products. They will be familiar with and proficient at welding in accordance with AWS, ASME and Customer specifications on carbon steel, stainless steel and alloy materials using internal shop drawings and/or customer prints. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Able to read and understand basic blueprints for layout, fit up and weld., • Complete understanding in the use of ATG’s work order/traveler documentation, material heat number tracing, weld maps, and Quality Management System, • Must be able to certify to ASME Sect. IX and AWS qualifications, • Able to perform x-ray quality welds on products fabricated from stainless steel, carbon steel and specialty alloys using certified processes, i.e. GTAW, FCAW, LBW etc., • HS Diploma, GED or equivalent., • Capable of reading advanced blueprints and weld symbols, • Understanding of GD&T, • Ability to produce and use fixturing necessary to complete weldments/assemblies., • Capable of completing weldments with consideration of tolerances, shrinkage and warpage., • Operate shop machinery (band saw, brake press, shear, drill press, plasma cutter, etc.), • Advanced understanding of polishing and ability to meet desired surface finish requirements., • Advanced ability to layout hole patterns, penetrations, brake lines etc., • Ability to safely operate forklifts and cranes., • Ability to operate and/or willingness to learn operation of capacitive discharge weld stud machines. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to stand and use hands to finger, handle, or feel. The employee is occasionally required to walk and reach with hands and arms. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. SALARY RANGE: $30.00 – 32.00 PER HOUR SCHEDULE: Monday-Thursday 6am-3:30pm, Friday 6am-10am *We kindly ask that recruiters and third-party staffing agencies do not contact us regarding this job posting. We are managing our hiring process internally and are not seeking external assistance at this time. Company DescriptionFor nearly 40 years, ATG, as a small business concern under 13 CFR 121, has been serving the needs of our clients with engineering, design, machining, fabrication services, testing and systems integration specifically focused on the production of containment systems. More specifically, ATG specializes in the engineering and manufacture of custom nuclear, biohazard, and chemical containment systems, including hot cells, gloveboxes, enclosures, and isolators.For nearly 40 years, ATG, as a small business concern under 13 CFR 121, has been serving the needs of our clients with engineering, design, machining, fabrication services, testing and systems integration specifically focused on the production of containment systems. More specifically, ATG specializes in the engineering and manufacture of custom nuclear, biohazard, and chemical containment systems, including hot cells, gloveboxes, enclosures, and isolators.

Job DescriptionLocated in Denver, CO Salary: $24 Welder - $20-30/hr DOE | Day Shift | Full-Time | Denver Skilled in MIG and TIG welding? Join a team where your craftsmanship, blueprint reading, and attention to detail are highly valued. This full-time Welder position offers steady hours and the opportunity to work with a variety of metals in a clean and well-run production facility. Key Responsibilities • Perform MIG and TIG welding on aluminum, stainless steel, and mild steel in a production environment • Read and interpret blueprints and weld symbols to determine appropriate techniques • Ability to pass MIG and TIG welding tests • Experience welding aluminum, stainless, and mild steel (brass and galvanized a plus) • Weekly pay • Medical, Dental, Vision, Short-Term Disability, and Life Insurance, • 401(K) Savings Plan • Call or text 'Welder' to our interview hotline at (303) 861-9100 to speak with a recruiter #1994ST Express Office: Denver (Downtown) 900 North Grant Street Suite 120 Denver, CO 80203

Job Description Coggins & Sons, Inc. is a caisson drilling and shoring contractor located in Littleton, Colorado. We have job sites located throughout the Denver area as well as the entire Rocky Mountain region. We are looking for motivated individuals to join our team on a long-term basis and work their way up the ranks in our company. Hours of work: Monday-Friday, 7:00 am – 3:30 pm. Must be willing to work any required overtime and weekends as needed to ensure projects are completed in a timely manner. This position starts at $26/hour, depending on experience. Benefits include health insurance after 60 days and a company profit-sharing retirement plan following 3 years with the company. Job duties/responsibilities: · Repair and maintain caisson and earth retention drilling equipment · Construction welding · Fabrication · Load and unload steel trucks, equipment, and tool trucks · Flexible enough to adhere to specialized safety rules as well as other “job-specific” rules encountered Qualifications/Requirements: · Must be authorized to work in the US · Must be at least 18 years old · Valid driver’s license and reliable transportation to get to various job sites (Class A or B CDL and a clean driving record is a plus) · Must be able to pass a criminal background check · Must be able to pass drug screenings (pre-employment and random) · Must be available for out-of-town work · Minimum of 2 years stick welding experience · Must be able to work in all weather conditions · Must be able to show up to work on time every day · Ability to receive direction and work with others as a team Coggins & Sons provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. Company DescriptionCoggins & Sons, Inc. is a caisson drilling and shoring contractor located in Littleton, Colorado. We have job sites located throughout the Denver area as well as the entire Rocky Mountain region. We are looking for motivated individuals to join our team on a long term basis and grow with the company. We have more than 60 years of experience in the industry which is not possible without a strong supporting staff. We have one of the best safety records in the industry and our commitment to safety ensures that each and every employee returns home in the same condition they came to work.Coggins & Sons, Inc. is a caisson drilling and shoring contractor located in Littleton, Colorado. We have job sites located throughout the Denver area as well as the entire Rocky Mountain region. We are looking for motivated individuals to join our team on a long term basis and grow with the company. We have more than 60 years of experience in the industry which is not possible without a strong supporting staff. We have one of the best safety records in the industry and our commitment to safety ensures that each and every employee returns home in the same condition they came to work.

Job Description K2 Trenchless iis looking for motivated individuals to join our team. We have immediate openings for full-time General Laborers that are willing to travel. Candidates must complete a pre-employment drug screen and background check. Employees in this position perform tasks involving physical labor at construction sites. This may include operating hand and power tools of all types, cleaning and preparing job sites, digging trenches, setting braces to support the sides of excavations, erecting scaffolding, cleaning up waste materials, and assisting other craft workers. Job Qualifications: NO Experience Needed but Preferred: • Valid driver’s license and a good driving record, • Reliable transportation, • Mechanical and/or welding skills a plus, • Ability to operate equipment a plus, • Dependable and hard working, • Physically able to climb, lift and bend repeatedly during an 8 to 10 hour shift, • A positive and professional attitude, • Standing, • Walking, • Climbing, stooping and bending, • Periodic lifting of 50 to 75 pounds, • All work is performed outside in heat, cold and inclement weather, • Exposure to all elements of nature, • Exposure to all types of terrain, • Exposure to loud noise, • Exposure to fumes, odors, gasses, dusts, etc., • Work in close proximity to heavy traffic K2 Trenchless offers a competitive benefits program which includes: • Health Insurance, • Dental Insurance, • Vision Insurance, • Paid Holidays (6), • Paid Time Off, • Matching 401k #hc167019

Job DescriptionSalary: $22.00 -$27.00/hour DOE Organizational Introduction: Underground Infrastructure Technologies (UIT), LLC. is a full-service contractor specializing in trenchless technologies headquartered in Lakewood, Colorado. We provide wet and dry utility installations utilizing trenchless technologies to complete projects for Departments of Transportation, Federal and State agencies, local municipalities, sewer and water districts as well as private development organizations. We have successfully completed projects for both public and private entities, with sizes ranging from 20 through 120 in diameter. As a sister company to Harrison Western Construction Corporation, a 50+ year-old firm, we are able to leverage superior leadership, management, process orientation and senior oversight on all projects large and small, delivering superior results for our clients. Position Summary: We are looking for experienced Construction Laborers to join our growing team. Laborers work under the direction of other field personnel performing physical activities in support of completing utility construction jobs. Laborers are vital to the success of the crew and job and should be able to trouble shoot and follow directions to ensure the job is completed safely and accurately. Primary Responsibilities include: • Assists crew leader in construction and maintenance work., • Cleans and prepares construction jobsites to eliminate possible hazards., • Works with specialized equipment, the type of equipment varies depending on the job., • Load or unload materials to use at the jobsite., • Maintain tools and equipment., • Report to job site everyday job sites vary; Out-of-State travel may be required up to 30%., • The majority of UITs work is in the Colorado Front Range area., • Gas allowance at around 50 miles from the Lakewood office., • Per diem starting after 75 miles from the Lakewood office., • Work in a safe manner at all times. Required skills: • 1+ year construction experience, preferably in utility construction preferred., • Ability to travel., • Ability to take direction from leadership., • Ability to recognize safety risks and hazards., • Ability to lift 50+ pounds., • Work standing, sitting or other physical positions., • Work in outdoor elements in all types of terrain and with all types of weather conditions., • Valid drivers license & reliable means of transportation., • Ability to pass a pre-employment drug screen, physical and background check., • Ability to work overtime when needed, including nights and weekends., • AWS welding certificate D1.1-1 (Structural welding Steel) strongly preferred, • Heavy equipment (excavator) operation experience is strongly preferred. Compensation and Benefits: • $22.00 - $27.00/Hour - DOE, • 3 Medical plans to choose from, • Vision and Dental plans, • Prescription safety glasses allowance, • Boot allowance, • Paid time off, • 8 paid holidays, • 401k with Company match that is immediately vested. It is the policy of Harrison Western not to discriminate against any employee or any applicant for employment because of age, race, religion, color, disability, sex, physical condition, developmental disability, sexual orientation, gender identity, veteran status, genetic information or national origin. This policy shall include, but not be limited to, the following: recruitment and employment, promotion, demotion, transfer, compensation, selection for training including apprenticeship, layoff and termination. We are an equal opportunity/affirmative action employer. We especially encourage veterans and individuals with disabilities to apply. To request reasonable accommodation, contact the HR department .

Job DescriptionSalary: 20.00 - 25.00 DOE The Wall Systems Laborer is responsible for fabricating, assembling, installing, and repairing sheet metal products used in construction, manufacturing, and HVAC systems. At Stonebrook Exterior, our reputation is built on an unwavering commitment to excellence in safety, productivity, and workmanship. Based in Lincoln, Nebraska, with offices in Omaha and Denver, we specialize in whole building envelope solutions for commercial and residential clients. Our innovative management team is highly proficient, safety-oriented, and cost-efficient, dedicated to meeting your goals and objectives. Safety is our top priority, ingrained in our company culture through a comprehensive program that sets high standards and communicates expectations daily. Widely acknowledged for our vast capabilities and ability to complete complex projects, Stonebrook Exterior is the preferred choice for large general contractors and private clients. We offer unparalleled value and service, adapting to our clients needs and expectations with flexibility and dedication. Our team ensures the highest standards of quality and efficiency, guaranteeing the success of every project we undertake. Essential Job Functions • Read and interpret blueprints to determine project specifications., • Measure, mark, and cut sheet metal using specialized tools and machinery., • Operate equipment such as shears, drills, and presses to shape and bend metal., • Fasten metal components using welding, bolting, soldering, or riveting., • Install sheet metal structures in buildings, HVAC systems, and other applications., • Ensure compliance with safety regulations while handling tools and heavy materials., • Inspect finished products for accuracy and quality control., • Perform maintenance and repairs on existing sheet metal installations., • Collaborate with engineers and other tradespeople. Preferred Talents • Excellent leadership, communication, and organizational skills., • Ability to read and interpret blueprints and technical drawings. Qualifications • High school diploma or GED; technical training or apprenticeship in sheet metal work is preferred., • Certification in HVAC or Sheet Metal Work preferred., • Strong knowledge of HVAC systems, ductwork installation, metal fabrication, and industry tools/equipment., • Familiarity with OSHA safety regulations and construction site safety practices.

Entity: Production & Operations Job Family Group: Engineering Group Job Description: We thrive in a fast-paced, dynamic environment where energy, agility, and collaboration are key. Our team operates at a high volume and high velocity, engaging with a diverse range of internal and external stakeholders daily. Success here means being proactive, adaptable, and relentlessly focused on delivering results—often under tight timelines and shifting priorities. If you’re energized by complexity, motivated by impact, and thrive in a culture that values communication, ownership, and momentum, you’ll feel right at home. The successful candidate will be responsible for facilities engineering and project management in support of new well and refrac facilities in the Eagle Ford basin. Responsibilities for this role are: * Support delivery of new well facilities that are safe, reliable, right-sized, on time, and within budget * Be adept at organizing and prioritizing work * Interface with other teams, including the Eagle Ford asset team (Reservoir, Geology, Land) as well as Construction, Commissioning, and Operations. Coordinate work across teams and seek feedback. * Focus on continuously improving in the areas of safety, cost, and reliability * Be a skilled and proactive communicator who listens well and works well across teams Key Accountabilities * Key contributor to the successful delivery of Eagle Ford new well facilities and upgrades to facilities for refracs. * Sizing and selection of chokes, flowlines, separators, coolers, UltraFabs, tanks and combustors. * Manage 3rd party firms that are creating P&IDs, C&Es, 3D models, material lists, and other engineering deliverables. * Work with vendors to ensure that appropriate equipment is delivered. * Ensure that equipment is specified appropriately and delivered on time. This includes requests for purchase orders of all equipment. * Create detailed work packs for Construction that facilitate efficient construction and lump sum bidding * Decide on the appropriate level of rigor for hazard analyses (HAZOP & LOPA, What If, etc). Ensure thorough, high quality hazard analyses are performed on new designs. * Ensure management of change (MOC) documentation (P&IDs, C&Es, plot plans, design bases, etc) is thorough, accurate and completed on time * Seek feedback from Construction, Commissioning, Flowback and Operations to continuously improve * Support finances: Create and maintain facilities budgets for AFEs and long term plans, update cost estimates for ongoing projects, and report on costs to various stakeholders. * Lead and participate in project look backs to capture and communicate lessons learned * Interface with Midstream to ensure 3rd party specifications are understood and followed * Interact with BPX regulatory team to ensure compliance with regulations Essential Criteria & Qualifications * Must be legally authorized to work full time in the US for anyone other than your current employer * Must not require, now or in the future, sponsorship for employment visa status (e.g., TN, H1B status) * A minimum of 7 years of facility engineering experience * Bachelor of Science degree or equivalent in Engineering * Excellent interpersonal and communication skills, including the ability to interact effectively at various levels in the office, field, and with external partners. * Excellent organization and prioritization skills. Ability to manage multiple projects and priorities. * Strong analytical skills * Ability to lead, mentor, support, and guide junior engineers * Experience in onshore US wellsite facilities design and operation * Project management experience * Proficient working with PFDs, P&IDs, and Cause & Effect charts * Experience facilitating HAZOPs and participating in LOPA * Working knowledge of separation design * Working knowledge of piping codes (ASME 31.8 and B31.3) * Working knowledge of API 12F tank specification * Working knowledge of pumps * Working knowledge of electrical area classification Desirable Criteria & Qualifications * Awareness of welding methods and procedures * Basic metallurgy knowledge and awareness * Working knowledge of corrosion mechanisms and mitigation strategies * Working knowledge of erosion and mitigation strategies * Working knowledge of NACE MR0175 * Working knowledge of drafting in AutoCAD and Bluebeam * Root Cause Failure Analysis (RCFA) experience * Pneumatic and electrical controls and safety systems experience * Awareness of artificial lift methods (ESP, rod pump, plunger lift, etc.) * Awareness of onshore US full well development life cycle – drilling, completions, and production This position will join our team in Denver, Colorado. How much do we pay (Base) $155,000 - $200,000 . Note that the pay range listed for this position is a good faith and reasonable estimate of the range of possible base compensation at the time of posting. Why join us? At bpx, we support our people to learn and grow in a diverse and challenging environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly. We offer a reward and wellbeing package to enable your work to fit with your life. These can include, but not limited to, access to health, vision, and dental insurance, flexible working schedule, paid time off policy, discretionary annual bonus program, long-term incentive program, and a generous 401(k) matching program. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations. Discover your place with us and help our business meet the challenges of reimagining and reinventing the future of energy. Travel Requirement Up to 25% travel should be expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is a hybrid of office/remote working Skills: Agility core practices, Agility core practices, Asset health monitoring, Asset Life Cycle Management, Asset Management, Cost-conscious decision-making, Cost Leadership, Cost Performance Management, Defect Elimination, Equipment criticality assessment, Equipment strategies, Facilitation, Group Problem Solving, Influencing, Maintenance, history and coding, Maintenance fundamentals, Plant Economics, Presenting, Process Safety Management, Reliability Fundamentals, Reliability in Design, Reliability leadership and governance, Reliability processes and systems, Root cause analysis, Stakeholder Engagement {+ 2 more} Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please ___. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Job Description JOB PURPOSE The purpose of this position is to maintain facility operations by performing general maintenance tasks that prevent downtime and ensure production safety, quality and efficiency. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • While performing the duties of this job, the employee is regularly outside and exposed to various weather conditions including hot/cold temperatures and rain/snow conditions., • Employee constantly uses fine motor skills, gross motor skills, eye/hand coordination, coordination, near/far vision and requires active hearing/listening., • Employee frequently stands, walks, sits, kneels, bends, lifts up to 50 lbs, carries up to 50 lbs, pushes, pulls, and utilizes manual dexterity., • Employee occasionally climbs and crawls., • Employee is exposed to loud noises, heavy machinery, moving equipment, oil, debris, solvents, smokes, gasses, fumes and aggregate materials. KEY ACCOUNTABILITIES The primary areas of responsibility include: • Repairs, • Maintenance, • Basic math, electrical, mechanical and hydraulic skills, • Excellent hand-eye coordination, comfortable working at high elevation and can problem solve by looking and listening, • Ability to work as a team member and follow through with scheduled tasks and instructions, • High School Diploma or GED equivalent preferred, • Perform general maintenance tasks of all facilities including loading, unloading, lifting, and moving materials in various forms of maintenance activities, • Includes basic electrical, carpentry, metal fabrication, etc., • Follow instructions and pre-established guidelines to perform the functions of the job, • Complete basic duties inclusive of maintenance equipment operation to accomplish tasks required of projects, • Updates repair procedures for future use and to communicate project status, • Utilize pneumatic tools, power tools, hand tools, shovels, welding tools, cutting torches and various safety devices to complete work orders, • Identify maintenance repair opportunities and safety concerns, work to eliminate/fix, escalate to Maintenance Supervisor if additional resources required, • Updates repair procedures for future use and to communicate project status, • Complete required paperwork on time and correctly Expires: 10/24/2025 Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionMaintenance Technician Position Summary Industrial Maintenance Technician supporting a food production facility in Denver, CO.Schedule: Full-time, Monday through Thursday. May include occasional overtime, weekend, or holiday shifts. Available Shifts: 1st, 2nd, and 3rd shifts Compensation & Benefits • Hourly wage: $33 – $40 (based on experience), • Health, dental, and vision insurance, • Retirement savings plan with employer contribution, • Paid time off, holidays, and sick leavePrimary Responsibilities, • Monitor and document equipment downtime, maintenance needs, and inventory usage., • Perform general facility and grounds upkeep., • Identify and resolve equipment or facility issues to reduce downtime and ensure safety compliance., • Assist with equipment setup and changeovers on production and packaging lines., • Troubleshoot and repair electrical and mechanical systems., • Collaborate effectively with operations, quality assurance, and sanitation teams., • Conduct routine and emergency maintenance as required by schedules or system alerts., • Carry out additional maintenance-related duties as assigned.Skills / Qualifications / Education, • 2+ years of industrial maintenance experience, • High school diploma or equivalent, • Experience in a manufacturing or production environment, preferably food or beverage, • Familiarity with lockout/tagout procedures, • Mechanical knowledge of components such as motors, bearings, chains, gearboxes, and seals, • Pneumatic troubleshooting experience (solenoids, compressed air systems), • Root cause analysis for mechanical issues, • Basic understanding of electrical systems (fuses, relays, starters, etc.), • Ability to read and apply equipment manuals for repairs, • Proficient with multimeters and understanding of control and source voltage systems (single-phase and three-phase), • General facility repair knowledge (e.g., plumbing, lighting, flooring)Requirements, • Availability to work weekends and holidays as needed, • Ability to lift 15–50 lbs (with or without accommodation), • Ability to stand, walk, and perform physical tasks for extended periods, • Comfortable working in a Good Manufacturing Practices (GMP) environment, • Effective communication skills, • Team-oriented mindsetPreferred but Not Required, • Experience with PLC systems (Allen Bradley or Siemens), • Skills in welding, fabrication, or machining

Job DescriptionJoin Our Crew as a Maintenance Technician – Where Every Day Makes a Difference! Are you a hard-working, responsible individual who thrives in a fast-paced environment? Do you take pride in being prompt, dependable, and a great team player? If so, we want to hear from you! This position involves a variety of skilled and semi-skilled tasks to maintain equipment and infrastructure related to the collection, transportation, storage, and treatment of water and wastewater systems. What You’ll be Doing: • Assist with maintenance and repair of equipment, machinery, and facilities, • Perform routine preventative maintenance and building upkeep, • Respond to emergency callouts and participate in on-call rotation, • Operate District vehicles and transport tools, equipment, and personnel, • Maintain accurate records, tools, and safety standards, • Support other teams and perform general duties as neededIf you’re someone who is:, • Hardworking and takes pride in doing the job right, • Punctual and dependable, with a strong sense of responsibility, • Eager to learn and grow your skills in a hands-on environment, • Team-oriented, but also able to work independently when needed, • Safety-conscious and attentive to detail, • Responds to emergency callouts. Must be able to respond to District facilities within 45 minutes while on-call., • Assists Maintenance Mechanic, Instrument/ Electrical Technician in maintenance and repair of equipment and machinery, structural, and grounds maintenance., • Performs routine building maintenance work., • Performs work in accordance with safety policies and procedures., • Enters and exits confined spaces such as underground vaults and manholes., • Performs routine preventative maintenance and adjustments to equipment., • Keeps maintenance and inventory records on spare parts and equipment., • Performs janitorial and housekeeping duties as required., • Loads, unloads, and transports equipment and personnel in District vehicles to a variety of work sites., • Maintains their assigned tools and equipment., • Assists other sections as needed to complete the goals of the organization., • Perform other duties and special assignments which may be outside the primary areas of employment., • Provides emergency field assistance to disabled equipment as needed and appropriate., • Performs and completes maintenance work order requests., • Works outside of normal schedule when required, including on-call rotation.Desired Minimum Qualifications, • High school diploma or GED equivalent is required., • Must possess and maintain a valid Driver’s License with an acceptable Motor Vehicle Record., • Must be at least eighteen (18+) years of age.Special RequirementsMaintenance Technician I, • Must be able to respond to District Facilities within approximately 45 minutes while on emergency on-call. (This will be at the Treatment Plant Maintenance Lead’s discretion if this duty is assigned.), • Meet and maintain the physical and fitness test requirements for wearing a SCBA within 1 month of date of hire., • Availability to work during non-scheduled hours when necessary., • One year of experience in a related field.Maintenance Technician II, • Same as Tech I, and, • Holds a Class 1 Plant Maintenance Technologist Certification by A.B.C. or must obtain a Class 1 Plant Maintenance Technologist Certification within one year of date of hire.Necessary Knowledge, Experience, Skills and Abilities, • Communicate clearly and effectively, both verbally and in writing., • Work independently with minimal supervision, while also taking direction and contributing as a collaborative, team-oriented employee., • Willing to assist wherever needed and adapt to changing priorities, conditions, and circumstances., • Work respectfully and effectively with individuals from diverse backgrounds and perspectives., • Operate and monitor a variety of hand tools, power tools, and process standby equipment in a safe and effective manner., • Perform strenuous physical labor in adverse or challenging conditions, including standing, walking, stooping, bending, climbing, crawling, lifting up to 50 pounds, and performing repetitive motions., • Demonstrate a strong understanding of electro-mechanical systems, with the ability to diagnose, troubleshoot, and repair equipment malfunctions., • Accurately maintain maintenance and inventory records, using computers and mobile devices (e.g., iPad) to log work orders and tasks in an asset management system., • Read and interpret maps, schematics, and technical drawings., • Become certified for confined space entry and safely perform occasional work in underground vaults, manholes, and similar environments., • Experience in mechanical maintenance is preferred, with a willingness and ability to continue learning and developing new skills., • Follow through on assigned tasks and exercise sound independent judgment when completing responsibilities.Tools and Equipment Used, • Personal protective equipment, • Industrial machinery and equipment: pumps, motors, blowers, and power supplies, • Technical literature, blueprints, and operational & maintenance manuals, • Power and hand tools typically used in equipment maintenance, • Gas and electric welding equipment, • Motor vehicles, including snowplows and tractor-trailer rigs, • Gas detection monitors, fall arresters, and other safety equipment, • Computer software and hardware While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger handle, feel or operate objects, tools or controls; and reach with hands and arms. The employee is frequently required to sit; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; employee is occasionally required to smell. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Regular and predictable attendance is an essential function of the job. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works in outside-weather conditions. The employee occasionally works near moving mechanical parts and in high precarious places and is occasionally exposed to wet and/ or humid conditions, fumes, airborne particles, traffic, toxic, or caustic chemicals. Work is performed both indoors and outdoors during all seasons of the year and is performed in potentially hazardous environments: i.e. confined spaces, electrical, infectious, and mechanical hazards. The noise level in the work environment is usually low to moderate. Selection Guidelines Formal application or resume, rating of education and experience, panel interview, reference check, background check and job-related tests might be required. The duties listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific states of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. The job description does not constitute an employment agreement between the employer and the employee and is subject to change by the employer as the needs of the District’s and requirements of the job change. Highlands Ranch Water & Sanitation District is dedicated to the principles of the Equal Employment Opportunity Act and prohibits unlawful discrimination against applicants based on race, color, religion, sex, national origin, age over 40, physical or mental disability, veteran status, genetic information, sexual orientation, or gender identity. About Us Highlands Ranch Water has provided water and wastewater services to Highlands Ranch residential and commercial customers for more than three decades. We strive to ensure that our water resources are used wisely. Highlands Ranch Water’s strategy is to optimize the use of surface water. Over the past 25 years, approximately 80 percent of the water supplied has come from renewable river supplies. Our Benefits We prioritize your well-being and recognize the importance of a work/life balance by offering outstanding benefits: Health & Retirement! • 100% paid employee-only medical insurance premiums, • 100% paid employee-only dental & vision insurance premiums, • 100% paid life and accidental death & dismemberment insurance premiums, • 100% contribution match for the pension plan, • Up to 6% employer contribution for the optional retirement planWork/life Balance!, • 80 hours of earned vacation per year, increasing after 5 years, • 80 hours of annual sick leave, • 32 hours of annual personal leave, • 10 paid holidays, • 200 hours of medical leave with certificationWellness & Improvement!, • Employee Assistance Program (EAP) for confidential support, guidance, and resources for employees and their families., • Flexible Spending Account (FSA) options for additional medical expenses., • Up to $2,000 a year for education reimbursement., • Highlands Ranch Community Association recreation center pass for a discounted fee. Saving, Planning & Other!, • Optional 457 deferred compensation plan to help employees plan for their retirement., • Generous stipend for personal cell phone. We accept applications for at least two weeks or until the position is filled. Submit applications at highlandsranch.org/apply or if viewing this posting from our career center, click "Apply" below. The schedule is generally 4-days, 10-hours between the hours of 6:30 a.m. and 5:00 p.m. onsite. The work schedule will vary depending on weather conditions, projects, events, programs, meetings, and staffing levels, and will include some evening, early morning, weekend, and overtime hours including a 24-hour on-call rotation. Regular and predictable attendance is an essential function of the job.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Denver, CO. These are mainly first shift opportunities with a pay rate of $18-25/hour dependent on experience & skill level with Travel Work Available. If you are a Maintenance Technician and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope (can include any or all of the following): • Perform Preventative & Corrective Maintenance on Machinery & Equipment, • Maintain Equipment & Facility to Ensure Maximum Reliability, • Electrical, Hydraulic & Pneumatic Maintenance, • Troubleshoot, Diagnose and Develop Solutions for Issues with Equipment, • Tech Maintenance, • Work on Business Unit Facilities, Equipment, Tooling, etc., • Repair work, • Some Welding, • General Building Maintenance, HVAC & Plumbing Repairs, • 2+ Years of Experience in the Field, • Able to Read and Understand Blue Prints & Schematics, • Tools of the Trade, • Proper PPE must be worn, • Safety Oriented Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job DescriptionPlant Equipment Maintenance Mechanic — Pneumatics & Controls Note: You must enable text messaging in this program in order to answer the required screening questions. Join Superior Farms in Denver, CO • Company: Superior Farms, • Location: Denver, Colorado, • Reports To: Maintenance Manager, • Employment Type: Full-time, on site, • Shifts: early morning (4 AM), morning (7 AM), late morning (8 AM), • Repair and maintain facility infrastructure and production equipment—minor to major tasks (complex work under guidance of skilled technicians)., • Execute preventive maintenance on schedule: inspect belts, fluids, filters; grease bearings/seals; repair or replace worn components., • Calibrate, troubleshoot, and repair pneumatic systems., • Install and repair electrical services and wiring for remodels; fix control circuits, switches, and refrigeration equipment., • Operate forklifts, electric pallet jacks, and boom lifts safely while performing repairs., • Complete building upkeep: windows, doors/locks, closets, blinds, plaster/drywall, and painting., • Use computer interfaces to control and monitor mechanical and utility systems., • Respond quickly to emergency maintenance requests., • Maintain daily/weekly/monthly checklists and accurate PM records.Must-Have Background, • High school diploma or GED; or one year of related experience/training., • Minimum one year of forklift operation., • Experience in building/mechanical equipment maintenance and repair—or equivalent education/experience mix., • Skilled with hand and power tools.Core Capabilities, • Baseline proficiency in welding, plumbing, electrical, control circuits, PLCs, pneumatics, software, hydraulics, carpentry, motors, pumps, and utility equipment operation/repair., • Detail orientation; clear communication and reliable follow-through., • Read/understand simple instructions, short correspondence, and memos; write simple correspondence; present information in small groups and one-on-one., • Math: whole numbers, fractions, decimals; calculate rate/ratio/percent; interpret miscellaneous drawings and schematics., • Knowledge of production facility operations., • Well organized; able to multitask and count accurately., • Good judgment, problem solving, and practical, common-sense thinking., • Comfort working in varied temperatures; basic knowledge of GMPs and HACCP., • Willing to work early hours with overtime, weekends, and holidays as needed (not guaranteed)., • Bilingual Spanish/English preferred; must be able to read and write English., • Computer proficiency preferred for maintenance roles.Physical Requirements, • Standing/Walking frequently; 8–12 hours per shift., • No sitting required., • Lift/Carry frequently 1–100 lbs; some tasks may exceed 100 lbs with both arms., • Push/Pull frequently; up to 100 lbs., • Frequent bending with attention to body mechanics., • Frequent kneeling/crouching/crawling., • Frequent reaching/handling of varied box sizes and materials., • Occasional climbing into/out of trucks, racks, and pallets., • Frequent operation of forklifts and pallet jacks.Work Setting, • Frequent exposure to moving mechanical parts., • Occasional exposure to wet/humid areas, cold, heights, fumes/airborne particles, chemicals, outdoor weather, electrical shock risk, and vibration., • Noise ranges from moderate to occasionally loud.Compensation & Benefits, • ESOP Shares, • 401(k) match, • Dental, Health, and Vision insurance, • Major holidays

Job Description IMMEDIATE OPENING! *Seeking candidates with experience in welding and fabrication. Apply Online or In Person: 4600 Monaco Pkwy. Denver, CO 80216 Hourly: $30-$35/hr Medical, Dental, Vision, Disability, Life, 401(k). 7 paid holidays, and Accrued PTO available at 30 days! COMPANY Conner Industries, Inc. is a rapidly growing manufacturer and distributor in the industrial lumber, custom wood packaging, and integrated packaging markets. With an outstanding reputation, and over 40 years as an industry leader, we operate 17 manufacturing facilities and currently sit at #2 in the U.S. for market share. KEY JOB RESPONSIBILITIES Ensure that the plant facilities and equipment are kept in optimal working condition and safety standards are upheld. Requirements DUTIES AND REQUIREMENTS Ensures the functionality and safety of facility equipment by developing and following a thorough preventive maintenance program for all machinery, which will encompass, but is not limited to: • Operating and testing automated lines, systems, and equipment;, • Restoring, repairing, overhauling, or replacing faulty or non-functional components and parts., • Enhances the performance and reliability of facility systems and related equipment by identifying, proposing, and executing modifications, expansions, and additions., • Organizes forklift maintenance and guarantees that daily forklift inspections are conducted., • Promotes a safe and healthy working environment by adhering to established standards and procedures, as well as complying with legal codes and regulations., • Expands job knowledge by engaging in educational opportunities and reviewing technical literature., • Must possess self-motivation, and be capable of working independently as well as collaboratively with a team., • Recognizes the significance of fulfilling commitments., • Availability for on-call duty during evenings and weekends may be necessary. QUALIFICATIONS, EDUCATION & EXPERIENCE • Able to troubleshoot electronics, pneumatic and mechanical systems and make necessary repairs in a timely and cost-effective manner., • Some carpentry skills preferred., • Manufacturing experience preferred., • Technical understanding required., • Machinery maintenance experience required., • Welding and electrical experience., • Able to listen and communicate effectively., • Must be self-motivated and able to make limited and independent judgments based on given alternatives., • Able to define problems, establish facts, and draw valid conclusions., • Able to interpret an assorted number of tasks or instructions. WORK ENVIRONMENT While performing the duties of this job, the employee will work in an indoor manufacturing environment. The noise level is usually moderate to high and requires the use of hearing protection. The employee is required to wear PPE. The employee may be exposed to weather conditions prevalent at the time. The work environment is structured, and lunches and breaks are regulated. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change. EEO Statement Conner Industries provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Conner Industries complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Conner Industries does not disqualify applicants that test positive for THC on the pre-employment drug screen. As permitted by state law, applicants being considered for positions with the following responsibilities: CDL Drivers, Forklift Operators, Sales, Maintenance, Management, and all Corporate positions, must pass a drug and alcohol test, done through an outside vendor, Quest Diagnostics, before beginning work in that position. Refusal to submit to testing will result in disqualification for the desired position. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k), • Life Insurance, • Paid Time Off, • 7 Company Paid Holidays, • Training & Development

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. What’s in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful Compensation: $65,000 - $75,000 Yearly Salary Guaranteed What you’ll be doing: • Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs., • Inspect, operate, and test machinery and equipment to diagnose machine malfunctions., • Performing basic welding activities to effect repairs on facilities and equipment., • Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems., • Perform and assign all preventive maintenance on facility and production assets., • Follow blueprints, schematics, operations manuals, manufacturer’s instructions, and engineering specifications using a documented schedule., • Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required., • Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours., • Assume responsibility for all shifts in the maintenance department., • Oversee and implement all maintenance related regulatory and environmental compliance requirements., • Assume responsibility for all aspects of safety within the maintenance department., • Perform Confined Space and Lockout / Tagout procedures where appropriate., • Monitor training status of technicians and provide time for required training as needed., • Utilize a Computerized Maintenance Management System., • Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor., • Train and develop maintenance partners. What we’re looking for: • High school and/or GED is preferred., • Two-year technical degree in an appropriate background is preferred., • Must be at least 21 years of age., • Valid driver’s license and a safe driving record are required., • Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment., • Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required., • Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered., • Minimum of 2 years of experience supervising maintenance personnel is preferred., • Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required., • Ability to read blueprints and schematics is required., • Ability to read and understand maintenance literature printed in English required., • Proficiency in Microsoft Office skills is required., • Experience in Hand & Power tools is required., • Lockout / Tagout experience is required, • Ability to work overtime as needed is required., • Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Year Round Who We Are: At 67 miles away, Winter Park is the closest ski resort to Denver. With easy access to 765,000 acres of public land, Winter Park is home to endless adventures. Whether you are looking to have your first taste of a winter season or to build a long-term career, we have something for everyone. Perks & Benefits: • Free season pass to Winter Park and all Alterra Resorts, • Discounted friends & family tickets, • Medical, dental, vision, life, paid parental leave and more for eligible employees, • 401(k) plan with 100% company match - up to 4%, • Mental health resources for all employees, • Food & beverage and retail discounts, • Onsite employee childcare based on availability, • Discounted equipment rentals, pro-deals, and more POSITION SUMMARY: The Vehicle Maintenance Supervisor will follow all Winter Park policies and procedures, all applicable laws (federal, state, and local), and all health and sanitation codes. The Vehicle Maintenance Shop Supervisor is responsible for coordinating the fleet maintenance of the Winter Park Vehicle Maintenance and Heavy Equipment/Snow cat Maintenance. This includes snow cat maintenance, heavy equipment maintenance and the miscellaneous truck fleet, the maintenance of snowmobiles, trucks, buses, cars, support snow cats and snow tour snow cats, and any other miscellaneous equipment owned and operated at Winter Park. This position reports directly to the Senior Manager of Slope Maintenance and consistently follows Winter Park/ Intrawest policies and procedures. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. WAGE: The base hourly pay range below represents the low and high end of Winter Park Resort's hourly pay range for this position. Actual pay will vary and may be above or below the range based on various factors including but not limited to experience, education, training, location, merit system, quantity or quality of production, responsibilities, and regular and/or necessary travel. The range listed is just one component of Winter Park Resort's total compensation package for employees. Other rewards may include many region-specific benefits. Hourly pay range: $30-$36 DOE ESSENTIAL DUTIES: • Supervise mechanics within shop., • Schedule vehicle and equipment repairs., • Maintain accurate and up-to-date maintenance logs., • Work with Warehouse, Purchasing Department and Slope Maintenance Director to maintain inventory items., • Purchase of necessary parts through Purchasing Department on required forms., • Distribute parts to proper shop., • Prompt presentation of purchase requests and receipts in event of emergency ordering., • Keep track of warranty items and make recommendations for repairs meeting warranty criteria., • Direct employees and plan time schedules. Keep up-to-date records and documentation., • Mechanical work as necessary., • Responsible for hiring, training, disciplinary actions, evaluations and termination of Journeyman and Master Mechanics., • Maintain list of vehicles with periodic maintenance dates., • Notify department heads of any vehicles overdue for periodic maintenance., • Reviews problems, makes recommendations, and anticipates company needs with Slope Maintenance Director., • Attend seminars and classes to expand and improve skills., • Report damage and abuse of vehicles to Slope Maintenance Director., • Offer technical advise and information to Mechanics., • Work with Slope Maintenance Director on shop systems and equipment upgrade., • Instructs operators on minor maintenance of their equipment., • Assist snowcat operators in scheduling routine maintenance., • Coordinates repairs and retrieval of snowcats broken down on the mountain., • Maintains a friendly, congenial, and helpful attitude while effectively dealing with the guests and other employees., • Maintain shop cleanliness., • Report and/or correct any unsafe conditions which may affect employee or public safety., • Maintain accurate maintenance records of all maintenance work., • Perform other duties as directed by supervisor REQUIRED QUALIFICATIONS: • Expected to be well versed in trouble shooting mechanical difficulties, capable of rebuilding engines, gearboxes, etc., • Must have a valid Colorado driver's license. Must be able to operate all of the following: • All Winter Park vehicles ., • All heavy equipment., • Garage tools, equipment and instruments., • Snowmobiles ., • Snowcats). EDUCATION REQUIREMENTS: Education: • High school diploma or GED (General Education Development - high school equivalency)., • Mechanical school - two years or four years equivalent on-the-job training., • Welding school (32 hours)., • Snow vehicle school to include drive train (32 hours).Test equipment school (16 hours or equivalent on-the-job training)., • Mechanic - related seminars (48 hours)., • Basic electronic training or experience. Experience: • Four years experience in related mechanical fields., • Supervisory/leadership class, seminar participation desirable., • Two years supervisory experience or demonstrated ability/experience at Winter Park or equivalent. PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk, talk, see, hear, and operate a computer and other office productivity machinery. WORKING CONDITIONS: • Indoor/Outdoor: While performing the duties of this job, the employee may be exposed to harsh and varying outside weather conditions., • Hazardous Materials/Noise: The noise level in the workplace is usually moderate. AN EQUAL OPPORTUNITY EMPLOYER: Winter Park Resort is an Equal Opportunity Employer and is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. Application Deadline:Recruiting timelines vary by position, however, all Winter Park Resort positions accept applications for a minimum of 3 business days from the posting date listed above. This position is open and still accepting applications.

Auto Body Technician - Relo Available DOE $70K-$175K Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision? • Paid Weekly, • Continuous Training, • Supportive Team Culture, • Company match 401K, • Medical/Dental/Vision, • Paid Time Off - 6 Paid Holidays, • Rewarding Work Responsibilities • Complete disassembly of vehicle to assist Collision Estimators in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Plan work procedure: follow work order for all operations listed, • Remove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage, • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept., • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards, • Perform other related duties as assigned, • Comply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications • Must be at least 18 years of age, • I-CAR / ASE certifications preferred, • 2-3 years’ collision repair experience preferred, • Valid Driver's License Required, • Customer-focused attitude with the ability to work well in a team environment, • Ability to read and comprehend written instructions and information, • Successful completion of background check required Behaviors/Competencies: • Integrity-Respect and accountability at every level and every interaction, • Customer Service-Provide the highest level of customer service while building customer satisfaction and retention, • Innovation-Develops and displays innovative approaches and ideas to our business, • Teamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 20 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, please e-mail or call (470)500-6808. This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description Job Title: Steam / Hydronic Systems Technician II Job Overview: We are looking for an experienced Steam / Hydronic Systems Technician for a client is Denver, CO. This position focuses on supporting operational systems through technical expertise, practical application of knowledge, and strict adherence to procedures. The primary duties involve maintaining, troubleshooting, and repairing steam and hydronic systems, as well as executing specialized tasks in system equipment, machinery, and pipefitting. Key Responsibilities: • Troubleshoot, assess, and identify issues within steam and hydronic systems, attempting repairs or escalating complex issues to specialists., • Perform pipefitting and welding tasks, including the installation and repair of HVAC systems across various facilities., • Use a variety of techniques to join pipes, such as welding, screwing, and soldering, ensuring systems are effectively installed and maintained., • Fabricate, repair, and install HVAC system piping, collaborating with other team members for heavy rigging and safe installation., • Diagnose and modify systems based on blueprints, schematics, and building code standards, ensuring all work complies with regulatory requirements., • Design and modify existing system infrastructure to improve efficiency or accommodate new needs., • Cross-train in at least one other trade as an apprentice., • Assist with snow removal and respond to emergency needs on a 24-hour, on-call basis., • Communicate and collaborate with on-site staff and other team members to ensure work is completed efficiently and safely., • Prepare job sites, including setting up scaffolding, maintaining safety protocols, and disposing of waste and hazardous materials., • Review work orders, prioritize tasks, determine required materials, and order supplies via the organization’s purchase order system., • High school diploma or GED., • At least four (4) years of experience in steam, hydronic systems, or related HVAC trades., • Valid Colorado driver’s license meeting the organization’s insurance standards., • Must reside in Colorado or have a permanent address within the state., • Competitive pay range between $37.00 to $44.00 per hour. For more details on compensation, click here. Company DescriptionExperience growth, flexibility, and success at Above The Rest Staffing—where opportunities thrive and careers flourish. Join us today and unlock your potential! ATR offers weekly and electronic pay, accrued sick leave and retirement savings. (Note: Replying to or submitting your resume on this website applies as your consent to receive text messages and/or emails from atrstaffing.net. You agree to receive at least one communication from us. Reply STOP to end.) Above the Rest Staffing (ATR) proudly celebrates over 20 years of dedicated service as a locally owned and operated staffing firm in Colorado. We specialize in temporary, temporary-to-hire, and direct hire placements, along with payroll services across a diverse range of industries and skill sets. Our reach extends nationally, and we are a proud participant in E-Verify. Our mission is to connect exceptional talent with outstanding opportunities, empowering both individuals and businesses to flourish. We are committed to providing unparalleled staffing solutions that drive success, fostering enduring partnerships rooted in trust, integrity, and expertise.Experience growth, flexibility, and success at Above The Rest Staffing—where opportunities thrive and careers flourish. Join us today and unlock your potential! ATR offers weekly and electronic pay, accrued sick leave and retirement savings. \r\n\r\n(Note: Replying to or submitting your resume on this website applies as your consent to receive text messages and/or emails from atrstaffing.net. You agree to receive at least one communication from us. Reply STOP to end.)\r\n\r\n ____________________________________________\r\n\r\nAbove the Rest Staffing (ATR) proudly celebrates over 20 years of dedicated service as a locally owned and operated staffing firm in Colorado. We specialize in temporary, temporary-to-hire, and direct hire placements, along with payroll services across a diverse range of industries and skill sets. Our reach extends nationally, and we are a proud participant in E-Verify.\r\n\r\nOur mission is to connect exceptional talent with outstanding opportunities, empowering both individuals and businesses to flourish. We are committed to providing unparalleled staffing solutions that drive success, fostering enduring partnerships rooted in trust, integrity, and expertise.

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. We are seeking a Materials Engineering Specialist to join The Material Engineering Unit under Material Consulting Services Department. The Materials Engineering Unit is responsible in providing technical support to plant operations, new projects activities, standardization, purchasing, manufacturers, and maintaining company standards up to date on issues related to metallurgical and welding. As a Materials Engineering Specialist your primary role is to provide operational support to upstream and downstream facilities including oil/gas wells, pipelines, gas plants, refineries, terminals and capital programs As a successful candidate you will be required to perform the following: • Provide consultation to field operations and projects of Saudi Aramco upstream facilities, pipelines, refineries, gas plants and terminals, • Resolve materials technical problems for operating facilities and SA projects., • Participate in incident investigation studies, • Conduct metallurgical failure analyses to determine root causes and recommend corrective actions to prevent recurrence., • Provide material selection recommendations based on standards and technical information., • Evaluate materials technologies for applicability on Saudi Aramco facilities, • Perform materials testing, evaluation & selection, • Review of project design packages for material selection, • Support other SA standard committees to resolve materials related issues., • Bachelor degree in Metallurgy amd Materials Engineering. Advance degree is highly desirable, • Minimum of 20 years of experience in materials engineering, fabrication, materials selection and failure analysis., • ability to work in multidisciplinary, multicultural groups and be able to pursue work independently, • Experience in mentoring local staff and providing training/teaching programs, • Have a general engineering consultancy experience and capability focusing on failure analysis, materials selection, equipment & piping fabrication, providing support to Saudi Aramco operations, capital programs and occasionally to Joint Venture operations. Job posting end date: 12/31/2025 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Job Description Job description We are looking for a self guided team worker in our rebuild shop. The Buckley Powder Rebuild Shop is tasked with building specialized equipment for use in the mining industry. Buckley Powder Co has 28 branch locations that the Rebuild shop builds all of the equipment for. Responsibilities could include welding, fabrication, hydraulics, general maintenance and electrical. All applicants MUST be able to pass a drug test, ATF background check and have a clean driving record. Summary As an Entry-Level Mechanic / Fabricator, you will be integral to our team. This role focuses on assembling and fabricating mechanical components, utilizing your foundational mechanic experience and skills with tools such as an ironworker. You will be expected to contribute to the assembly process while learning and growing within the organization. Your attention to detail and commitment to quality will be essential as you help ensure that our products meet the highest standards of performance and reliability.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Denver, CO. Most positions are first shift with a pay scale of $18-25/hour based on experience and skill level with Travel Work Available. If you are a Millwright and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope to include any or all of the following: • Installation, Maintenance, Repair of Industrial Machinery and Equipment, • Conveyor Work, • Installing Racking, • Helping with Set Up, Remodel & Assembling New Conveyors, • Some Welding, • General Labor, Job Site Clean Up, • Moving/Relocating Machinery, • Shut Down Work, • 2+ Years of Experience in the Field, • Mechanically Inclined, • Basic Tools for the Trade, • Proper PPE must be worn Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Tank Trailer Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for Tank Trailer mechanics with 3-5+ years of tank & trailer repair experience for our Commerce City, CO location! Address: 4850 East 74th Avenue, Commerce City, CO. 80022 Shift Hours: Monday through Friday 8:00am- 5:00pm. Pay Range: $28.00 to $45.00 per hour, dependent on experience. (Skill-based pay rate reviews and potential increases every 6 months.) Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • TIG & MIG aluminum, stainless or carbon welding experience (preferred), • Ability to effectively and efficiently inspect tanks and trailers to align with DOT standards (HM183, hazmat), • Background in confined space entry (preferred), • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description McCandless Truck Center is one of the region's premier Commercial Truck Sales & Leasing Dealerships, proudly serving the Aurora area for many years. Our team enjoys a fantastic culture and opportunities for advancement, which are company-wide focused to help you grow both personally and professionally. We're interested in helping you establish and build a long-term career with us, because we know that happy employees lead to happier customers! What We Offer: • Health Insurance - 80% of employee premiums are company paid!, • Free Dental & Vision insurance for employees!, • Life Insurance Policy, • 401(k) plan with company match, • PTO and Vacation Days, • Training, • Fantastic Culture and Work Environment Job Summary • Responsible for repairs and required preventive maintenance of trailers, • Inspect, trouble shoot, diagnose, and perform maintenance on equipment, • Interpret work orders and technical manuals, • Repair or replace defective parts, components or systems, • Test repaired equipment for proper performance and to ensure that the work meets manufacturer’s specifications and legislated regulations, • Regular attendance is required., • This is not an all-inclusive list of job requirements and/or duties and may not contain all mental and physical capabilities necessary to perform the job at all times due to circumstances. Operational, safety and other needs may require the employee to perform any and all other duties as assigned. Employees are expected, and must be able to perform all such duties and tasks., • Inspect, service, and replace trailer parts as needed., • Diagnose and repair trailer components such as: doors, floors, and side panels., • Troubleshoot, diagnose, and repair electrical issues., • Fabricate parts from samples, sketches, or verbal instructions., • Utilize appropriate resources to determine most effective and efficient method for repair and locate parts., • Cutting and grinding as needed., • Weld metal parts using MIG welding processes with steel and aluminum., • Completion of work orders in a timely manner., • Document work completed for billing., • Perform quality checks after repairs., • Ensure work is done safely and meets quality standards., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and polices., • Provide a great level of attention to detail., • Follow all safety rules and quality standards., • High School Diploma or General Educational Degree (GED), or any combination of education, which would provide an equivalent background, • Must be 18 years of age, • Must have a minimum of one-year experience and/or completion of trade school; or equivalent combination of education and experience, • Must be able to use hand tools and test equipment, • Must have own tools, • Must possess the ability to keep up with changing technology and updates, • Possess mechanical ability and interest of electronics and precision equipment, • Must possess the strength and stamina required to work with heavy equipment and work in awkward positions, • Physical activities include: walking, lifting, twisting, turning, climbing a ladder, etc., • Possess excellent verbal and written communication and listening skills, • Should be self-starting and organized, • Must possess a strong work ethic and good problem solving skills, • Must be willing to work any shift, including nights and weekends in any weather condition; flexible work schedule, • Must be able to lift approximately 70 lbs., or more if required by the essential functions of the job, • Must be able to comply with all company policies, rules, procedures and Code of Conduct, • Must be able to interact well with others, • Must be able to work independently, or in a team setting, • Must be capable of working under tight time constraints in a high volume environment with multiple priorities, • Responds well to questions; Ability to read, interpret and comply with written information and documents such as safety rules, operations / procedure manuals and maintenance instructions with a high comprehension and concentration level to include the ability to meet deadlines, • Must pass a pre-employment drug screen, random drug and/or alcohol tests, and will be subject to a criminal history background check Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and fumes or airborne particles. The employee may be required to work in high/precarious places, with hazardous materials, and in various weather conditions. The noise level in the work environment ranges from quiet to loud as required by the essential functions of the job.

Job DescriptionStructural Integrity Associates, Inc. (SIA) is currently looking for a Mechanical Engineering Analyst to join our Process Pressure Vessels team. This role would participate as part of a dynamic team in the engineering analysis, condition assessment, and life prediction of pressure vessels, piping, and auxiliary equipment used in upstream and downstream petroleum refining, petrochemical, and chemical industries. The position requires the individual to develop the skills to manage and coordinate the technical and administrative aspects of the work. They are expected to actively participate in both internal and external training and development programs. This position will be based in our Denver, CO office. Responsibilities and Qualifications: Technical: • Assist senior staff with evaluations related to design, life assessment, and root cause failure analysis of pressure vessels, piping, and other equipment., • Perform thermal heat transfer and structural stress analysis of pressure vessels, piping systems, rotating equipment, and other plant structures using both classic and finite element analysis methods. Knowledge in fluid mechanics is preferred., • Perform simple pressure vessel calculations using commercial software such as PV-Elite and/or Compress., • Develop a working knowledge of fatigue, corrosion, and crack initiation and growth mechanisms and fracture mechanics concepts employed for serviceability assessment of damaged or flawed components., • Gain broad experience with materials, welding, and nondestructive examination techniques., • Assist with field inspections of plant equipment., • Assist with the preparation of written technical reports and presentations., • Perform all work in accordance with SI’s Commercial Quality Procedures and with an acute awareness of client requests., • Be aware of new business opportunities and work with senior staff to pursue as appropriate., • Support project managers in execution of large-scale projects, • Develop the skills to independently manage small-scale projects., • Ensure quality and enhance job skills by seeking peer review and appraisal., • B. S. or M.S. in Mechanical Engineering or similar discipline, • ASME Boiler and Pressure Vessel Code Design Experience is a plus., • Knowledge of SolidWorks CAD software, Abaqus FE software, and general fracture mechanics concepts. Piping stress analyses experience using CAESAR II is a plus., • Computer Programming experience is a plus., • Excellent written and oral communication skills are essential, as well as a working knowledge of computer software including Microsoft Office Export Control Notice: Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110. Hiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE’s Generally Authorized Destinations List: . About Us: SIA is an engineering consulting firm serving various industries including Nuclear Power, Energy Services, Pipeline Integrity, and Critical Infrastructure. Join a team of internationally recognized experts in a culture based on knowledge, excellence, and respect for one another. Our employees are members of a distinct community of internationally respected professionals committed to quality, engineering innovation and a shared goal of building a safer world. Why Work at SIA? SIA offers a competitive salary and performance-based bonus program. Our retirement benefits include a Traditional 401k, Roth 401k, and an employer match. To help employees maintain a work-life balance, SIA also offers various paid time off including vacation, floating holidays, sick time, and parental leave. Our employees also enjoy a comprehensive benefits program that includes the following: • Medical, dental, and vision insurance, • Life Insurance and AD&D, • Short-term and long-term disability, • Health Savings Account with employer contribution, • Flexible Spending Account for health care and dependent care SIA does not welcome third-party recruiters, employment agencies, headhunters, etc. Please do not reach out to SIA employees requesting a call, sit down, meeting, or email response. Powered by JazzHR 0tZZSxJ54v

Job Description JOB DESCRIPTION Data Clover is currently seeking an experienced Automotive Body Technician to join our team. As an Automotive Body Technician, you will be responsible for repairing and restoring damaged vehicle bodies and frames. We are looking for a detail-oriented individual with a strong work ethic and a passion for providing exceptional service to our customers. Position Summary: • Examine damaged vehicle and assess the extent of structural, body, mechanical, or interior damage, • Perform necessary repairs and replacements, including removing damaged panels and parts, • Repair or reconstruct damaged body panels and frames using hand tools and welding equipment, • Prepare vehicle surface for painting, including sanding, priming, and applying paint, • Properly match and mix paint, and apply paint coats to vehicle surfaces, • Ensure all repairs meet quality standards and specifications, • High School diploma or equivalent, • Previous experience as an Automotive Body Technician, • Knowledge of automotive body repair techniques and tools, • Strong attention to detail and ability to work independently, • Good physical condition and stamina, as the position may require lifting and carrying heavy objects, • Ability to read and interpret repair orders and technical manuals Pay and Recognition: • Paid holidays & paid time off, • New hires eligible for a $1500 sign on/retention bonus, • Holiday match Insurance / Retirement: • Insurance: medical, vision, dental, accident, critical illness and hospital indemnity plans, • Up to 12 weeks paid pregnancy leave or 1 week parternity leave, • Health savings, • Flex spending accounts (tax free), • Short-term and Long-term disability plans, • Life Insurance (Whole Life and Term), • 401k with company match Learning and Career Development: • Digital career path tool to assist with career development, • Continuous training through Asbury's Internal Learning Management System, • Professional growth and development opportunities Additional advantages: • Employee assistance program, • Employee discounts parts and service repairs, • Scholarship opportunities, • Opportunities to join our community service initiatives, • Aggressive Employee referral program with bonus opportunities, • Saturday lunches provided by dealership

Job DescriptionBell Plumbing is Hiring for Immediate Plumbing Install Tech Openings! Bell Plumbing, Heating, Cooling & Electrical has an immediate opportunity for you. Bell has been a proud provider of home service solutions to the Denver area since 1926. That’s over 95 years of experience! We understand the importance of efficient, outstanding service to our customers. If you are an energetic and passionate plumbing tech looking that values excellence and true craftsmanship in your field - we want to hear from you. Bell’s ideal Residential Plumbing Install Technician checks all the boxes below: • Are you proud of your plumbing skills and enjoy showing off your work?, • Does a day full of plumbing installation jobs get you out of bed in the morning?, • Do you enjoy meeting new people every day?, • Is traveling around Denver from job to job your idea of a perfect day?, • Is problem-solving your jam?, • Are you always looking for opportunities to improve your skills?, • Do you embrace teamwork and welcome opportunities to work independently?, • Does providing unparalleled customer service make your day? What You’ll Do: As a Residential Plumbing Install Technician, you will work as a Plumbing Journeyman while installing and repairing plumbing fixtures and pipes, and re-piping of water, air, and gas systems. You will be cutting, welding, and assembling pipes, tubes, fittings and fixtures. Your areas of work will be in residential and light commercial applications. You will complete installations that are functional and meet or exceed current plumbing codes. You will always inspect and test to ensure that new systems work efficiently to fulfill Bell’s customers’ satisfaction, safety, and comfort. Requirements • A minimum of 4 years of experience, • Technologically proficient, • Clean driving record and background, • Ability to pass drug screening, • Ability to give and take direction, • Great communicator with commitment and passion for learning You receive your healthcare benefits and retirement through Local 3 union. Bell offers additional benefits, including: • Paid weekly, • Company provided uniform, tablet, and cell phone, • Special employee pricing on Bell’s home services and remodel, • Company-paid gym membership, • Ongoing training and growth opportunities We believe in hiring smart, curious people who are excited to learn and develop their skills. If you're excited about this role but your experience doesn't align perfectly with the job description, we encourage you to apply anyways. You may be just the right candidate for this or other roles!

Job DescriptionExperienced auto body custom fabricator/welder/paint-prep for restoration candidates only please. Salary $25-35.00/Hourly (DOE) Job Type: Full-time, 40 hours, M-F Weekly pay Benefits Include Health/Dental/Vision Insurance Paid Time Off Paid Vacation Company Shirts (Note: Benefits start after a 30 day probationary period) Qualifications Custom Body Fabrication/Welder/Paint prep experience US work authorization (Required) Automotive Restoration Education High school or equivalent Work Location Englewood, CO About Classic Touch Interiors & Restorations Classic Touch Interiors & Restorations is a classic automotive restoration shop located in Englewood, Colorado. We provide full frame off restorations, mechanical, interior, body/fabrication and paint services all under one roof. Our family is proud to have spent the last 17 years helping the automotive dreams of others come true. About Your Role Classic Touch is currently experiencing a healthy flow of in-bound projects. We need good people to move these beautiful cars through; reliable, skilled technicians and craftsmen with proven, professional experience that truly care about their work, care about producing as a team and have a passion for classic cars. Specifically, we are currently looking for a custom metal fabricator/welder- panel fitting/fabrication/MIG TIG welding, rust repair, body modifications (butt welding, no overlapping), etc., bodywork (panel fit, blocking, sanding, priming, etc.) and paint finishing (wet sanding and buffing). Ninety percent of our work is custom car building for 1995 and earlier vehicles. Expectations of Job Performance 1. Project Management: Use the work order to assess efficient and logical plan with materials and parts on hand and apply. Take direction from shop manager. Ability to self-manage your time on projects for maximum efficiency is paramount. A verbal progress report will be expected every day. We expect strong attention to project deadlines. Ability to problem-solve independently as well as brainstorm in a team environment. Accurately cut and bend patch metal and/or install OEM components per all work orders. Ability to understand how individual components relate to the complete system in accordance with specific vehicle patterns. Ability to modify OEM or factory components as needed in accordance with the specific vehicle pattern. Must be able to be flexible - working on more than one project in split days. Meet Classic Touch Interiors end-product standards as well as identify for upgrades to the shop manager. 2. Parts and Materials Handling Maintain accurate and error-free records of all materials. Communicate missing and/or broken parts immediately. Ability to adapt and conform with a wide variety of premium quality mechanical components. Ability to research and assist in ordering of mechanical components. Ability to verify correct part and fit of all parts prior to installation. Inspection of both raw and finished product for conformance to specifications per work order. Strong attention to maintaining the integrity of the vehicles exterior and interior clean and unmarred condition during the body component installation. 3. Shop Procedure and Tool Maintenance Must be willing to assist in duties needed by manager to accommodate daily workflow - such as daily moving of cars or large tools for maximum efficiency. Own basic tools and toolbox. Use and knowledge of all basic tools and advanced fabrication tools. Quick learner. Strong understanding of measurements in all units. Maintain a clean, safe, and efficiently organized workstation daily. Must help maintain a clean shop. Everyone helps clean, no exceptions. Qualifications Prefer previous experience in automotive restoration industry MIG/TIG Welding/Panel fitting Experience with body/paint hand and power tools with precise hand-eye coordination. Strong attention to detail with ability to properly install components in tight spaces of vehicle. Comfortable with automotive lift operation. Ability to thrive in a fast-paced environment while working independently. Comfortable with verbal and written direction and switching tasks as needed to meet deadlines. Valid Drivers License and reliable transportation to and from work daily. Adhere to all health regulations and utilize all safety equipment. Comfortable with basic computer login/logout for timecard. Physical Demands Must be able to lift, carry, and place merchandise and supplies up to 50 pounds without assistance. Frequent standing and bending for long periods of time. Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, twisting. Long periods of time under suspended vehicle on jacks or a lift. Returns any unused inventory to storage and enters and keeps track of allotted vehicles to stay on schedule to meet deadlines. Safely operates a motor vehicle. Application Question(s): Can you provide photos of vehicles you have worked on? Tech specs? Are you willing to provide a live demonstration of your skills during the interview? Interviews by appointment only.

Job DescriptionDescription: Hulcher Services is seeking a motivated and success-driven Apprentice Operator I. You will play a vital role in transporting, operating and the servicing of assigned heavy equipment used in clearing railroad derailments by lifting and moving derailed railway cars and locomotives. About Us: Hulcher Service is an industry leader with more than 500 employees and over 25 divisions located in the United States and Mexico assisting customers with derailments as well as engineering work, track maintenance, disaster response, and environmental projects. What You'll Do: • Drive tractor-trailer or escort vehicles., • Material handling of heavy steel chains, blocks and steel cables, and other devices., • Climbing and crawling on and under derailed railroad cars., • Maintenance, cleaning and setup of equipment requiring use of small and large tools including cutting torch and welding., • Digging, hammering, and other physical types of work with various tools, • Lifting 100 lbs. maximum with frequent lifting and/or carrying objects up to 50 lbs., • Room for growth, • Must have a valid Class A CDL with NO restrictions., • Must have a valid driver's license., • Ability to work on-call 24/7 365 days a year in an emergency response environment., • Ability to travel up to 50% of the time., • Monday through Sunday on the job or possibly at division., • On call for 24 hours for derailments requiring immediate response., • 8-hours/day Monday through Friday; on call at other times for derailments requiring immediate response., • The Response Team is to be available at all times and all hours of the day.

Job Description Auto Body Collision Repair: Body Technician The Body Technician is a skilled craftsman with a thorough understanding of how to restore automobiles with light to heavy damage through collision repair. Key responsibilities include assessing exterior damage, repairing manufacturer guidelines, ensuring necessary parts, reshaping panels with minor damage, welding and refinishing techniques as needed. Job Responsibilities: • Ensure repairs adhere to OE standards, DRP part choices, and ADAS requirements for calibrations and scanning, verifying a quality and safe repair., • Complete disassembly of vehicles, • Refit new parts such as bumpers, fenders, grills, moldings, and other bolt-on and welded items., • Complete all repairs in a manner in which the repaired areas are restored to the original manufacturer’s specifications, including door, hood and deck alignments, chassis, and frame measurements, and welded on unibody parts., • Check all parts for accuracy before starting the repair and notify the Estimator of any incorrect parts or other discrepancies., • Work efficiently to meet the target delivery date assigned to an RO., • Assume responsibility for all parts assigned to your job(s), • Protect the interior and exterior non-repair areas of all vehicles in repair from additional damage, including dust, dirt, scratches, primer, overspray., • Read and understand every line item of each vehicle’s RO as pertaining to your responsibilities and visually inspect every vehicle to ensure that all the repairs are complete., • Provide guidance, education, and assistance to the assigned apprentice in such a manner that furthers their developmental growth. Key Performance Metrics • Customer Service Index Score 95+ for Quality, Done on Time, and Net Promoter Score, • Cycle Time Efficiency Skills/Qualifications: • I-CAR Gold Class and ASE certification is a plus., • Complete understanding of all facets of light to heavy automobile collision repair., • Knowledgeable in safety guidelines for repair., • Skilled welder with the ability to remove and refit welded panels as well as the bolt-on items required in a typical crash repair., • The ability to read, understand, and perform written instructions accurately and consistently and to work independently as well as with others in an organized manner. Behavioral Excellence Required: • Perform all assigned responsibilities according to the Company Standard Operating Procedures., • Maintain a clean, organized work area always, adhering to 5S organization., • Participate in training programs as required to maintain the technical and professional skills and techniques necessary for this position., • Extend normal working hours as necessary to accommodate workload and customer requirements.

Job DescriptionStructural Integrity Associates, Inc. (SIA) is seeking a Senior Consultant/Consultant for the Vessels & Internals group, to coordinate with experts in the nuclear industry to develop and implement innovative solutions to industry problems and concerns. This role includes engineering contributions toward analyses and assessments to support clients in resolving engineering concerns. Development of the consultant will include activities to diversify client engagement, business development, and project management opportunities. Primary Responsibilities: • Manage technical projects that offer solutions to industry clients, • Develop new leads and project opportunities with clients, • Develop engineering assessments to resolve issues for utility clients., • Contribute to proposals for project development and scoping., • Understand engineering approaches from colleagues and experts., • Degree in Materials Engineering and/or Mechanical Engineering. Advanced degree is a plus., • Utility experience a plus, specifically EPRI BWRVIP or MRP or WRTC or NDE or other industry program., • Minimum of 15 years of experience in the following fields:, • Design Engineering (Construction Codes: ASME Section III Code - Stress and Fatigue Analysis, ASME Section VIII, B31.1). ASME Section XI knowledge is a must including Appendix Q., • Programs Engineering including Inservice Inspection, Nondestructive Examination, Welding, Repair (Structural Weld Overlays), and License Renewal., • Code Committees (ASME, ASTM). Active Code Committee membership and engagement is a plus., • Experience with the Domestic US Commercial Nuclear Fleet Reactor Design & Materials is a plus., • Experience with NRC regulations and business protocol, • Willingness to travel up to 15% to support clients and business needs., • Excellent written and oral communication skills including presentations are a must., • Desire to continuously improve and grow engineering, client engagement, and project management skill set, • Finite Element Analysis (FEA) capability, • PE License, • Willingness to support emergency client work necessary for plant restart or to avoid unnecessary plant shutdown, • Curiosity to learn new technology and analytical approaches, • PMP (and other) project management certification, • Familiarity with material degradation and failure modes, • Strong self-organization tendencies and ability to adapt to changing scenarios, • Understanding of the Design process through Production and eventual Operation, • Ability to review, critique, and improve the written output of other engineers Structural Integrity Associates, Inc. (SIA) does not welcome third-party recruiters, employment agencies, headhunters, etc. Please do not reach out to SIA employees requesting a call, sit down, meeting, or email response. Export Control Notice: Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110. Hiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE’s Generally Authorized Destinations List: . About Us: Structural Integrity Associates, Inc. (SIA) is an engineering consulting firm serving various industries including Nuclear Power, Energy Services, Pipeline Integrity, and Critical Infrastructure. Join a team of internationally recognized experts in a culture based on knowledge, excellence, and respect for one another. Our employees are members of a distinct community of internationally respected professionals committed to quality, engineering innovation and a shared goal of building a safer world. Why Work at SIA? SIA offers a competitive salary and performance-based bonus program. Our retirement benefits include a Traditional 401k, Roth 401k, and an employer match. To help employees maintain a work-life balance, SIA also offers various paid time off including vacation, floating holidays, sick time, and parental leave. Our employees also enjoy a comprehensive benefits program that includes the following: • Medical, dental, and vision insurance, • Life Insurance and AD&D, • Short-term and long-term disability, • Health Savings Account with employer contribution, • Flexible Spending Account for health care and dependent care bbJXD8lGvE

Job Description Rose Paving is looking for a Mechanic Who we are Rose Paving LLC, leads the industry in providing complete parking lot management solutions to commercial and industrial properties nationwide. We offer a collaborative work environment where employees can contribute to impactful projects while enjoying opportunities for growth and development. With a rich 50-year history, their commitment to quality and client satisfaction makes it an exciting place to build a career. What you'll be doing The Mechanic will handle oil changes, brake jobs, small engine repairs, minor tune-ups, and other related tasks. Additionally, they will purchase vehicle parts and perform various duties as assigned. For Building/Grounds, responsibilities include removing trash from work and kitchen areas, maintaining the grounds, and ensuring work areas are stocked with supplies. MUST have relevant mechanical experience. Must be punctual, detail-oriented, and willing to go the extra mile. Some late hours and weekends may be required. You will be responsible for... • Perform oil changes and brake repairs, • Purchase vehicle parts as needed, • Handle small engine repairs and minor tune-ups, • Maintain grounds and perform upkeep, • Remove trash from work and kitchen areas, • High school diploma or GED, • 3-5 years of relevant experience, • Welding experience is a plus, • CDL preferred, but not required Why Join Us? • Competitive Compensation: Along with a competitive salary, we offer comprehensive benefits, including health insurance (PPO or HSA), 401(k) matching, and paid time off., • Opportunities for Advancement: We believe in promoting from within. If you're looking for long-term career opportunities, we provide clear paths for advancement based on your skills, performance, and ambitions., • Team-Oriented Culture: We believe in collaboration. You'll work alongside a team of skilled professionals who are passionate about their work and committed to delivering the highest standards to our clients., • Exciting Projects & Impactful Work: Be part of a company where your contributions make a real difference. We take on meaningful projects that challenge and inspire our team., • Professional Development: We invest in your growth with training programs, mentorship opportunities, and resources to help you build your skills and career., • A Fun & Supportive Environment: From team outings and company events to a positive day-to-day work atmosphere, we foster a workplace where people genuinely enjoy coming to work. Job Posted by ApplicantPro

Job Description JOB DESCRIPTION - DALLAS TRAILER REPAIR CO. TRAILER TECHNICIAN Job Summary This position is responsible for routine maintenance, diagnostics and repair on all trailers and related equipment. To succeed in this role, one should have a solid knowledge of basic mechanic’s tools, service, and diagnostic equipment, as well as strong attention to detail, excellent communication, and customer service skills, and be able to work independently or as a team member. Mechanic Responsibilities * Inspect, analyze, and diagnose trailers and related equipment for mechanical issues, faulty and replacement parts. * Perform requested repairs according to industry standard * Perform routine maintenance on trailers and related equipment. * Perform trailer body work and under-carriage work (e.g. air bag replacement, cross-members, dolly legs, tandem system) * Problem solve and document an action plan for all repairs and follow checklists and protocols while conducting repairs. * Ensure a safe, organized, and tidy workspace, including regularly cleaning and maintaining tools and equipment. * Follow all health and safety rules and guidelines, as well as common sense safety practices. * Ability to work independently, as well as support coworkers, able to work as part of team and work well with co-workers. * Perform other duties as assigned. Knowledge-Based Requirements * ASE certifications highly desired but not required. * 1-2 years of mechanical or equivalent experience * Able to pass pre-employment knowledge/skill test to determine probability of job success and mechanical classification. * Proven mechanical acuity and basic math skills. * Must be able to read and write in English, as required for documentation of diagnosis and solutions. * Must have own tools plus Safety Glasses, Steel-toed shoes, and Hearing Protection. * Able to pass 10-year background check. * Able to pass drug test/medical physical exam Physical Demands/Abilities performed throughout the duration of the work shift. * Heavy Work- Exerting up to 100lbs of force occasionally and/or up to 50lbs of force frequently or up to 20lbs of force constantly to lift, carry, push, pull, or otherwise move objects, including other job-related items. * Walking/Standing for sustained periods of time. * Climbing – Ascending or descending ladders, stairs, scaffolding, ramps, poles, and the like, using entire body * Stooping/Crouching – Bending body downward and forward by bending at the waist, legs, and spine. * Balancing – Maintaining body equilibrium to prevent falling. * Kneeling/Crawling – Bending legs at knee to come to a rest on knee(s) or moving about on hands and knees or hands and feet. * Whole Hand/Fingers – Picking, pinching, typing with fingers and grasping with the fingers and palm. * Repetitive Motion – Substantial movements (motions) of the wrists, hands, and/or fingers. * Talking – Expressing or exchanging ideas by means of the spoken word to others accurately and quickly when necessary.? * Hearing – Receiving detailed information through oral communication at normal speaking levels with or without correction. * Vision – Close visual acuity to perform activities such as reading, using measurement devices, viewing electronic devices, assembling, inspecting small parts and/or operating machines and power tools, operate a motor vehicle and determine the accuracy, neatness and thoroughness of work performed. Work Environment: Work is performed in a shop; both indoors and outdoors. Activities occur inside and outside and are subject to work environments that are not climate controlled, weather, and hot/cold temperature changes, dirt, dust, soot and possibly mold, loud noise, and ladders to use for high heights. Potential hazards such as moving vehicles, proximity to moving mechanical parts, electrical current, high places, high heat, and exposure to chemicals, atmospheric conditions (e.g. fumes, odors, dust, mists, gases), or poor ventilation, or a workspace may be exposed to smoke residue, mold and mildew, contaminated water, or other unsanitary conditions, as well as being in closed quarters/confined spaces (e.g. crawl spaces, small, enclosed rooms, attics, etc.) This is not an all-inclusive list of every job duty affiliated with the TRAILER TECHNICIAN position and Dallas Trailer Repair Co reserves the right to assign additional tasks and responsibilities as needed. Job Type: Full-time Salary: $20.00 - $30.00 per hour [Depending on experience] Benefits: 401(k) Dental insurance, Health insurance, Vision Insurance Paid Time Off Holiday Pay Life insurance Required Tools by Tech Classification: Laborer • Tool Carry Box, • Basic Wrench Set, • Basic Socket Set, • Pair Vice Grips, • Pair Channel Locks, • Impact Gun, • Screwdriver Set, • Basic Pliers Set, • Needle Nose Pliers, • Tape Measure, • Hammer, • Safety Glasses, • Steel-toed shoes, • Small Tool Box, • 1 1/8 Wrench & Deep Socket, • 15/16 Wrench & Deep Socket, • Basic Socket Set, • 2 pair Vice Grips, • 2 pair Channel Locks, • Pipe Wrench, • Impact Gun, • Die Grinder, • Screwdriver Set, • Pry Bar, • Safety Glasses, • Steel-toed shoes, • Hearing Protection Tech 2 • Med Tool Box, • Wrench Set to 1 1/4, • Sockets deep & shallow to 1 1/4, • 2 Pair Vice Grips, • 2 Pair Channel Locks, • Pipe Wrench large, • Impact Gun, • Die Grinder, • Screwdriver Set, • Allen Wrench Set, • Torque Bits 25-45, • Safety Glasses, • Steel-toed shoes, • Full Size Tool Box, • Wrench Set to 1 1/4, • Sockets deep & shallow to 1 1/4, • 4 Pair Vice Grips, • 4 Pair Channel Locks, • 2 Lrg C Clamps, • 2 Pair Channel Locks, • Pipe Wrench, • Impact Gun, • Die Grinder, • Screwdriver Set, • Safety Glasses, • Steel-toed shoes, • Small Tool Box, • Welding Hood, • Welding Gloves, • Striker, • 2 Small Vise Clamps, • 2 Big Vise Clamps, • 2 Pair Vise Grips, • 2 Med C Clamps, • Chalk Line, • Air Drill, • Safety Glasses, • Steel-Toed Shoes, • Med Tool Box, • Welding Hood, • Welding Gloves, • Striker, • 4 Small Vise Clamps, • 4 Med Vise Clamps, • 4 Lrg Vise Clamps, • 4 Lrg C Clamps, • Chalk Line, • Air Drill, • Skill Saw, • Safety Glasses, • Steel-Toed Shoes, • Hearing Protection

Job Description Job Title: Quality Control Technician – Level 2 & Level 3 Location: Aurora, CO Job Type: Full-Time Industry: Manufacturing / Electro-Mechanical Systems Position Summary: As a Quality Control Technician, you will play a critical role in inspecting, documenting, and improving the quality of our products. Level 2 focuses on component inspections, while Level 3 works with electro-mechanical assemblies across all product lines. Both levels require attention to detail, strong problem-solving skills, and a commitment to safety and continuous improvement. Level 2 – Quality Control Technician (Component Inspector) Key Responsibilities: • Perform incoming and in-process inspections of supplier and in-house fabricated components, verifying dimensions, certifications, material traceability, and conformance to specifications and drawings., • Inspect welded assemblies, CNC-machined components, and press/brake-formed parts for dimensional accuracy and workmanship., • Validate critical features such as edge quality, hole size, bend angles, weld continuity, and surface condition., • Verify component kits and staging are complete and correct prior to assembly release., • Prepare and package components for supplier shipments using appropriate dunnage, labeling, and documentation., • Contain and quarantine non-conforming components to prevent downstream flow., • Document inspection results, lot acceptance, and nonconformance reports (NCRs) in ERP/QMS systems., • Recommend corrective actions at the component/fabrication level and verify effectiveness after rework., • Collaborate with Fabrication, Supply Chain, and Engineering teams to close quality gaps., • 5+ years in fabrication disciplines (welding, turret, CNC machining, press/brake) with documented inspection experience., • Experience preparing and packaging materials for supplier shipments safely. Level 3 – Quality Control Technician (Electro-Mechanical Assemblies) Key Responsibilities: • Inspect electro-mechanical assemblies and sub-assemblies for fit, alignment, hardware grade/length, and torque compliance., • Verify electrical integrity: wire gauge and insulation, circuit protection (fuses/breakers), termination quality, polarity, continuity, insulation resistance, grounding/bonding, harness routing, and strain relief., • Confirm labeling, identification, and traceability (wire/cable IDs, panel labels, revision status)., • Review RMAs and returned product: verify serial/lot, recreate symptoms safely, and document conditions with photos., • Perform functional checks: continuity, controlled power-on, breaker/fuse verification, load simulation, mechanical actuation tests., • Validate sealing, gasketing, adhesives, and enclosure ingress protection as required., • Document findings, NCRs, and test results accurately; recommend assembly-level corrective actions and verify fixes., • Coach assembly technicians on workmanship standards, torque discipline, and electrical/harness best practices., • 5–7 years in electro-mechanical assembly inspection across multiple product types., • Strong electrical fundamentals including circuits, wire sizing, overcurrent protection, grounding/bonding, and continuity., • Hands-on experience with multimeters, torque tools, continuity testers, and insulation testers., • Ability to interpret drawings, BOMs, and work instructions at an advanced level., • Experience documenting NCRs and recommending practical, spec-compliant fixes., • Leadership ability to coach junior QC techs., • Preferred certifications: IPC/WHMA-A-620, AWS visual weld inspection, ASQ CQT/CQI. Core Competencies: • Methodical and detail-oriented., • Proactive in identifying and resolving quality issues., • Strong documentation and reporting skills., • High school diploma or equivalent required., • Work in a hands-on, quality-driven environment., • Collaborate with cross-functional teams on continuous improvement initiatives., • Opportunity to mentor and grow within a supportive, safety-conscious culture.Company DescriptionA cultivated a workplace where employees feel valued and supported. One former assembly worker noted significant improvements in pay and management under new ownership, highlighting a shift toward professionalism and ambition. Employees appreciate the company's willingness to train, reward ambition, and maintain open communication.A cultivated a workplace where employees feel valued and supported. One former assembly worker noted significant improvements in pay and management under new ownership, highlighting a shift toward professionalism and ambition. Employees appreciate the company's willingness to train, reward ambition, and maintain open communication.