Welding jobs in Seattle, WashingtonCreate job alerts

Northwest Container Services (NWCS), is looking to hire a highly motivated, Heavy Equipment Mechanic to work on Terex/Lift Ace container reach stackers, Hyster forklifts, Genie snorkel lifts, chassis, small engines, gen sets at our sites in ___ (1801 Taylor Way Ste A, Tacoma, WA 98421) and ___ (635 S Edmunds St, Seattle, WA 98108). Primary yard will be Tacoma. Pay range is $35.00 - $40.00/HR DOE Schedule is Monday - Friday Shift is 6:00 AM to 2:30 PM with some overtime as needed Safety Sensitive: Yes Position requires Valid Driver's License, eligible motor vehicle report, eligible criminal background report & clean drug panel screening. Responsibilities: • Must have the flexibility to travel to our yard in Portland, Oregon or Boardman, Oregon if needed for support or training., • Performs repairs and assigned preventive maintenance services., • Diagnosis and repair of electrical, hydraulic, engine, transmission, suspension, differential, planetary, wet and air brakes on vehicles and equipment., • Must have basic computer / electronic skills., • Utilize vehicle computer electronic systems and laptop programs for repairs., • Maintain a clean, safe work area in compliance with corporate and OSHA standards., • Maintain a clean shop truck and an organized parts room with adequate inventory for repairs., • Maintain accurate records on equipment, including oil samples, work orders and daily worklog., • Requires strenuous outside physical work, heavy lifting, pushing, or pulling required of objects over 75 pounds., • The ability to communicate the status of repairs on equipment to operations and management., • Work with local vendors and parts suppliers for outside repairs as needed. The ideal candidate possess: • Position REQUIRES Valid Driver’s License and clean driving record., • Position REQUIRES Valid Medical Card to operate a Non-CDL vehicle over 10,000 LBS., • Provide your own tools., • Ability to read, write, comprehend and communicate service and technical information., • Extensive experience working with heavy equipment., • Welding and fabrication skills necessary. What we offer to you: • Medical, Dental, and Vision Benefits, • Uniforms/Safety Gear, • Yearly Boot allowance, • Company phone To be considered for any of our current openings you must complete an application at . Application information and additional instructions can be found once you select your position of interest. We offer excellent benefits including: medical, dental, vision, flexible spending account, long term & short term disability, life insurance, 401K retirement and unlimited opportunities to "Connect with Your Future". A link to our benefits overview can be found here: Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. Washington State Pay Range for this position is $35.00/HR - $40.00/HR #ACBoost

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”) This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $169,200.00/Yr. ID 2026-19665 Category Body Technician Position Type Regular Full-Time Location : Postal Code 98034 Location : Address 13511 100th Ave. N.E. Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $169,200.00/Yr. Prioritization Tier 1 – Priority

Job Description Company: Spiral Arts Job Title: Industrial Maintenance Mechanic / Machine Builder / Mechanical Assembler Location: Seattle, WA Pay: $30-$35 DOE Overtime Available Started in 1994, Spiral Arts is an industry leading manufacturer of glassblowing tools and equipment. We are looking for an experienced industrial mechanic and machine builder seeking stable long-term work with competitive hourly pay and overtime opportunities. This position is best suited for experienced industrial mechanics, millwrights, or machine builders who can work independently and troubleshoot production equipment with minimal supervision. Position Summary: The Industrial Maintenance Mechanic / Machine Builder/ Mechanical Assembler is responsible for the precision assembly, installation, troubleshooting, and mechanical maintenance of industrial machinery and automated equipment. This role requires advanced mechanical aptitude, the ability to interpret complex technical drawings, and experience with machine alignment, mechanical systems, and equipment diagnostics. Key Responsibilities: · Perform precision mechanical assembly of industrial machinery, tooling, and automated equipment from detailed blueprints, schematics, and engineering drawings. · Install and align mechanical components including motors, gearboxes, linear guides, bearings, couplings, conveyors, and drive systems. · Perform equipment layout, mechanical fitting, shaft alignment, and component calibration during machine build or installation. · Diagnose mechanical failures using systematic troubleshooting methods and implement corrective repairs. · Perform preventative and predictive maintenance on production equipment and mechanical systems. · Disassemble, inspect, and rebuild mechanical assemblies including pumps, drive units, and motion systems. · Install and service pneumatic and hydraulic components such as cylinders, valves, regulators, and manifolds. · Utilize precision measuring instruments including calipers, micrometers, dial indicators, and alignment tools. · Support machine commissioning, testing, and equipment start-up activities. · Work closely with engineering, controls technicians, and production teams to optimize equipment performance and reliability. · Document assembly procedures, repairs, and maintenance activities in maintenance systems or work orders. Technical Skills & Knowledge: · Strong knowledge of mechanical power transmission systems (gears, belts, chains, couplings). · Experience with mechanical alignment, tolerance stack-ups, and precision fitting. · Ability to interpret complex mechanical drawings and assembly diagrams. · Familiarity with hydraulic and pneumatic systems. · Knowledge of industrial safety standards and lockout/tagout procedures. · Experience with rigging, hoists, and equipment installation. Minimum Qualifications: · High school diploma or GED required. · 3–5+ years of experience in machine building, industrial maintenance, or mechanical equipment assembly. · Demonstrated ability to troubleshoot and repair industrial machinery. · Proficiency with mechanical hand tools, power tools, and precision measuring equipment. Preferred Qualifications: · Technical degree or certification in Industrial Maintenance, Mechanical Technology, or related field. · Experience with automated manufacturing equipment, robotics, or CNC machinery. · Welding, machining, or fabrication experience. · Experience supporting equipment installation and commissioning projects. Work Environment: Industrial manufacturing environment with exposure to machinery, mechanical systems, and production equipment. Position may require lifting, climbing, standing for extended periods, and occasional overtime during machine installations or maintenance shutdowns. Experienced mechanics, millwrights, and machine builders are encouraged to apply. Spiral Arts is an equal opportunity employer.

At a Glance Company: Made Cascade Location: Seattle, WA (Ballard Industrial District) Job Type: Full-Time Pay Range: $30.00 – $40.00/hour (based on experience) Shift: Flexible Overtime: Yes Experience Level: Mid-Level Work Authorization: Not specified Why This Role Exists This role exists to support continued growth in both R&D and production work at Made Cascade. As new products move from concept to prototype to small-batch production, the sheet metal workload continues to expand. The Sheet Metal Technician plays a critical role in supporting rapid prototyping, iterative design, and repeat production , ensuring projects move quickly from raw material to finished, shippable parts. The Work You’ll Be Doing In this role, you will: Operate CNC laser cutting and CNC press brake equipment for prototyping and production Program parts directly at the machine console Set up tooling, verify first articles, and maintain repeatable quality Run multiple jobs and bounce between machines as schedules require Interpret manufacturing drawings and work independently from prints Install hardware and fasteners (PEM, standoffs, etc.) Perform post-production work including deburring, polishing, cleaning, and packaging Conduct in-process and final QC inspections to maintain dimensional accuracy Collaborate with engineering and R&D teams to provide design-for-manufacturing feedback Assist with other shop projects during downtime This is a true job-shop environment , not button-pushing production. Machines, Controls & Software You’ll work with equipment such as: Machines: CNC Laser Cutters CNC Press Brakes Manual fabrication tools (as needed) Controls: Amada (preferred experience) Inspection Tools: Calipers, micrometers, basic measurement tools What We’re Looking For Required: Trade school training in sheet metal fabrication or equivalent hands-on experience Experience operating CNC laser and press brake equipment Ability to read and interpret fabrication drawings Strong basic math skills and attention to detail Experience with general fabrication and shop practices Preferred (Not Required): Experience with Amada press brakes and Laguna laser cutters MIG/TIG welding experience Advanced fabrication or assembly skills Materials You’ll Work With Mild Steel Stainless Steel Aluminum Why Machinists Like Working Here Machinists and fabricators choose Made Cascade because: Work is interesting, varied, and design-driven Strong collaboration between engineering and manufacturing Flexible schedules and realistic workloads Opportunity to contribute ideas, not just run parts Access to the shop after hours for personal projects A culture built around problem-solving and craftsmanship Pay, Benefits & Schedule $30.00 – $40.00/hr , based on experience Overtime eligible Subsidized medical, dental, and vision insurance Company 401(k) plan 14 days PTO (7 vacation + 7 sick) 8 paid holidays Flexible work schedule Apply Interested fabricators can apply directly through hireCNC. Apply Now or save this job to come back later.

Job DescriptionSteel Fabrication company in South Seattle seeks a hardworking, dependable Shop Superintendent. This is not an entry level position. Applicants must have a minimum of 5 years’ experience as a supervisor and or a fitter, not a welder. Our company works exclusively in hot-rolled steel, specializing in structural work. Our scope of work includes structural beams and columns, canopies, stairs, embeds, and handrail.Applicant must possess the following:· The ability to organize project schedules and commitments, optimize production to achieve maximum productivity.· Manage shop employees – Daily tasks, attendance, discipline, advancement, teaching skills· Monitoring employees’ workloads, breaks & lunch breaks.· Safety – Constant assessment, monthly safety meeting with topic and documented. Mitigate safety risks through proper training of staff, maintenance of equipment, and compliance of health/safety codes (OSHA, WISHA and company safety policies).· Reading Memos/Drawings thoroughly and understanding type of work, recognizing what types of procedures/fabrication are required per drawings. Talk to Project manager(s) about what the shop may need to facilitate completing tasks, i.e.: shape cut plates, bevels, outside cutting or processing. • Ability to set up layout on a large scale, direct fitting steel beams and columns with great accuracy· Possess the knowledge to build various types of stairs and handrails, structural steel, & architectural/miscellaneous steel so that you can aid in layout, QC, and the instruction of younger fabricators.· Must have good understanding of erection and shop drawings so that you can find potential issues in fabrication and suggest potential solutions to office/detailers.· Must have a good grasp on D1.1, D1.8, and basic AISC code.· Order consumables, tools, and equipment, Authorize shop purchases, provide receipts & invoices for accounting.· Must know how to properly diagnose issues with welders and wire feeders.· Knowledge of the basic principles of electricity and 3-phase power.· Delegate work to fitters/welders to ensure products are fabricated efficiently, correctly, comply with industry and company quality standards.· Coordinate with project managers to ensure customers receive products in a timely matter.· Need to be able to write thorough weld procedures.· Schedule Outside Q.C. inspections timely, not impact production or shipping requirements.· Must handle issues that arise with/amongst staff in a professional manner., • Understanding of pre-qualified welding procedures., • Proficient with ironworking tools and equipment: oxy-fuel torches, plasma cutter, grinders, bandsaws, ironworker, notchers, presses, drills, taps, pneumatic tools, overhead cranes, rigging, forklifts, etc....· Maintenance of Facility & Equipment, Inventory of Equipment & Tools, Assign personnel for maintenance of bathrooms/yard/bldg.· Recognize when work is getting low and when workload is high and notify office and or move to overtime to avoid missing delivery schedule(s).· Vehicle Maintenance~ work with shipping for maintenance of all vehicles keeping them operational & schedule regular service· Provide insight and communicate to Management for what will help you to do your job better., • Be on site from 6am-2:30pm, 5 days a week.

Title Shipfitter About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Shipfitter Reports to: Structural Superintendent Pay Range: $35.00 - $41.00 Hourly DOE Responsible for the use of various tools and equipment in the fabrication, assembly, and erection of steel structure. This position includes drawing reading, steel structure removal shipboard and reinstall. The position requires a working knowledge of technical to include 1689 and 1688. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Ensure work is done safely and meets quality standards., • Must have own basic skill related tools and equipment if not supplied by the workplace., • Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames., • Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools., • Locate and mark reference lines, such as center, buttock, and frame lines., • Position parts in hull of ship., • Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding., • Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips., • May prepare molds and templates for fabrication of nonstandard parts., • May tack weld clips and brackets in place prior to permanent welding., • May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines., • Ensure work is done safely and meets quality standards., • Assemble items as instructed by floor supervisor., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and policies., • Provide a great level of attention to detail and focus on the given task., • Work with team members to maximize productivity and efficiency., • Prepare product for shipment., • Report any unsafe work conditions or practice to supervisor. None KNOWLEDGE, SKILLS, AND ABILITIES • Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals., • Familiarity with the metric system, • Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents., • Ability to stand continuously for long periods of time., • Ability to identify and measure material., • Ability to follow instructions given both verbally and in written form., • Willingness to learn and work to the best of his/her abilities as well as dependable work ethic., • Knowledge of machines and tools, including their designs and uses., • High school graduate, or GED preferred., • Six months to one-year related experience and/or training, • Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime., • Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions., • Work over extended periods of time in tightly configured confined spaces., • May be made to enable qualified individuals with disabilities to perform essential job functions. Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Job Details Division: Nucor Steel Seattle, Inc. Location: Seattle, WA, United States Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Compensation Data Average Salary range for the role $118,789 - $144,376.22 DOE with OT availability and opportunity for advancement. This position is eligible for Nucor’s full benefits including bonuses, tuition assistance, stock purchase, 401(k) and profit sharing. Basic Job Functions: Nucor Steel Seattle is accepting applications for the position of Industrial Electrician. Industrial Electricians work for and report to the Electrical Lead and the Electrical Supervisor in either the Melt Shop or Roll Mill. Electricians must be committed to their own personal safety as well as the safety of others around them. Electricians are required to troubleshoot complex electrical and mechanical systems, while working individually or as a part of a team with other maintenance and production personnel. Industrial Electricians must be able to function safely in a high stress environment and will be responsible for maintaining all production and auxiliary support equipment in a craftsman-like manner. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: 2-Years previous experience or formal training related to Industrial Electrician position Preferred Qualifications: 5 years of experience as an industrial electrician DC overhead cranes experience AC and DC Motors experience Variable Speed Drives experience Programmable Logic Controls experience Motor Controls and Distribution Systems experience Mechanical aptitude, including pneumatics, hydraulics, welding, etc. Nucor is an Equal Opportunity/Affirmative Action Employer – M/F/Disabled/Vets – and a drug – free workplace

Job Details Division: Nucor Steel Seattle, Inc. Location: Seattle, WA, United States Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Compensation Data Average Salary range for the role $118,789 - $144,376.22 DOE with OT availability and opportunity for advancement. This position is eligible for Nucor’s full benefits, including bonuses, tuition assistance, stock purchase, 401(k), and profit sharing. Basic Job Functions: Nucor Steel Seattle is accepting applications for the position of Plant Maintenance Mechanic. The Plant Maintenance Mechanic will report to the Mechanical Lead and Mechanical Supervisor in either the Melt Shop or Rolling Mill. Plant Maintenance Mechanics must be committed to their own personal safety as well as the safety of others around them. Plant Maintenance Mechanics will be required to troubleshoot complex mechanical systems, individually or as part of a team of other maintenance and production personnel. Plant Maintenance Mechanics must be able to function safely in a high-stress environment and will be responsible for maintaining all production and auxiliary support equipment in a craftsman-like manner. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: Ability to work as part of a team. Have a coachable and positive attitude. Willing to work a rotating shift work schedule. Two years of mechanical experience Preferred Qualifications: Two years journeyman experience, or work equivalent Able to operate mobile equipment including overhead cranes Good working knowledge of Microsoft programs, CMMS systems, drawing data bases. Ability to design and draw in Solid Works, Master Cam and Auto Cad Strong working knowledge of mechanical theory and the ability to use this theory to diagnose all manner of mechanical issues Good understanding and working knowledge of the following: Setup, operation, and maintenance of manual & portable machine tools Various Welding and oxy cutting processes Hydraulics, Pneumatics, and Lubrication systems and components Print and schematic reading Overhaul & Maintenance of industrial machinery Nucor is an Equal Opportunity Employer and a drug-free workplace

Description Who We Are Vigor Marine Group is an established, innovative, integrated partner with a national footprint in marine maintenance and modernization, marine fabrication, and marine services. With four shipyards, six dry docks, and more than 20,000 feet of pier space on or near U.S. Naval bases and at historic shipyards, our 2,500 dedicated employees across four states - from the Pacific Northwest to San Diego to Norfolk - personify the values of our company. Vigor Marine Group takes pride in being the employer of choice for our employees, who in turn take great pride in their contributions to the communities where they live and work, and to their nation - through their living wage jobs supporting their local economies, and through the world-class maritime and industrial services they provide to further our defense readiness and national security. For more information, visit vigor.net. PAY RANGE: \n • Seattle: $99,000 - $110,000 \n, • Portland: $95,000 - 106,000 \n\n POSITION SUMMARY: This position develops manufacturing strategies, systems, processes and machines to support production build success. Strategies that result in high-quality products built safely within budgeted parameters while limiting impact to the environment. ESSENTIAL FUNCTIONS AND MAJOR RESPONSIBILITIES: (This list is not intended to detail all aspects of the assigned work but is representative of the job's overall responsibilities.) \n • Prepares necessary calculations and/or design concepts; analyzes technical studies and proposals, and resolves technical problems by examining relevant technical data and performing appropriate calculations.\n, • Evaluates and develops engineering plans or work orders to have fixtures built and machined.\n, • Assists in the development of build strategies, erection sequences, lifting strategies, etc.\n, • Supports engineering projects by preparing detailed designs from concept designs and written specifications.\n, • Evaluates and develops engineering for fixtures and heavy lift plans.\n, • Confer with design engineering firms and other on staff to resolve design problems.\n, • Develops written specifications and processes for components and systems.\n, • Assists in preparation of estimates and proposals by developing material take-offs, analyzing alternative production strategies for technical risks and feasibility, and creates text, figures, and drawings for technical proposals to customers.\n, • Lead continuous improvement initiatives to reduce bottom line cost in areas such as material usage, ergonomic hazards and labor requirements.\n, • Improves manufacturing efficiency by actively searching for opportunities to improve data quality, data delivery / presentation, and yard production practices.\n, • Other duties as assigned\n\n JOB SCOPE: The role operates within the confines of the build strategy and other planning documents. The person contributes to the initial build strategy. The position operates within general parameters, however exercises appropriate independent judgment in adjusting priorities, goals and work assignments, methods, procedures and techniques to successfully facilitate the project. KNOWLEDGE SKILLS AND ABILITIES: \n • Excellent interpersonal and communication skills, both oral and written for constant interaction with all departments and employee levels and outside customers \n, • PC skills required, including engineering computer equipment and software (analysis, design, CAD/CAM and data programs). Knowledge of MS Windows, Advanced Excel, Word, Auto-CAD. \n, • Must be well-organized, detail and customer (internal and external) oriented, a self-starter. \n, • Ability to read and comprehend work specifications, work orders, blueprints, contracts and technical publications. \n, • Knowledge of ACAD, Mastercam, and Solidworks programs to model fixtures and parts to be machined\n, • Ability and skill to create models to be machined as needed\n, • Knowledge of machining carbon and stainless steels, aluminum, Titanium and hard materials\n, • Knowledge of welding processes and metallurgy\n, • Ability to run continuous improvement projects that require acquiring assets, revitalization and return on investment justification\n, • Working knowledge of Materials Requirement Planning System; lean manufacturing process.\n, • Perform costing activities for capital justification, business case analysis and general costing activities.\n, • Ability to handle competing priorities and deadlines effectively and respond well to last minute, high priority, time sensitive projects. \n, • Ability to schedule, direct and organize work within a diverse department and coordinate work with other departments to maintain efficiency and facilitate group decision-making, team building and conflict resolution. \n, • Must be comfortable discussing plans and design details before design is complete. Must be able to discuss concepts before all facts are available. \n\n EDUCATION AND/OR EXPERIENCE: \n • Degree in manufacturing or mechanical engineering is required.\n, • Minimum five (5) years of experience in a similar production industry is required. \n\n CERTIFICATES, LICENSES AND REGISTRATIONS: None required. SUPERVISORY RESPONSIBILITY: None INTERPERSONAL CONTACTS: Must be able to discuss complex thoughts and timelines with all levels and departments in the company in addition to contacts outside the organization the most prominent outside contact being suppliers/vendors. This position maintains a variety of professional relationships and must be able to determine the appropriate level of communication and interaction for various situations and circumstances. The ability to effectively influence decisions through respectful interactions with others both within the organization and outside of the organization is essential in this role. PHYSICAL DEMANDS: Work is conducted in a dynamic, fast-paced office setting with moderate to loud noise levels from production. The individual may be required to be in production areas. He/she must be able to walk to and from job sites. The person must be able to climb inclined stairways and vertical ladders. The incumbent may be required to lift up to 20 pounds. He/she may be required to work more than 8-hour shifts and weekend work. There may be local travel and out-of-town travel (including air travel) up to 20-30% of the time with notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT: While in production areas, will be exposed to all weather conditions, noise, dusts and odors. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This role is with a federally contracted employer and is subject to regulations that restrict employment to US Persons only (i.e. US Citizens, lawful permanent residents, legally recognized asylees and refugees, and persons protected under INA). Successful job candidates will be asked to provide documentation of their US Persons status. Vigor Industrial LLC and its wholly owned subsidiaries are drug, smoke and vape-free workplaces. Prospective employees must pass a drug and alcohol test and background check as pre-employment screening. Vigor Values Vigor expects all employees to enhance the atmosphere in which they work by living the Vigor Values every day. Truth: We seek the truth, and we speak the truthResponsibility: We act on what we know is rightEvolution: We seek mastery, and adapt to a changing worldLove: We care about the people we work with, and the world we live in At Vigor we offer a generous benefits package that includes: Medical RX Dental Vision Life AD&D LTD STD EAP Discretionary bonus Tuition Reimbursement FSA (Medical, Childcare, Transportation) 10 paid holidays PTO 401(k) Vigor and its wholly owned subsidiaries are committed to inclusion and diversity by providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, protected veterans, age, genetics, the presence of a physical or mental condition or disability that can be reasonably accommodated, or any other protected class under relevant laws in the locations we operate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and can be requested with Vigor's Human Resources Department. In addition to federal law requirements, Vigor complies with applicable state and local laws governing nondiscrimination and non-retaliation in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, benefits, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Who is CenTrio? CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows. Why Join CenTrio? CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks. • Medical Benefits first day of hire, • Medical, dental, vision, Life & AD&D benefits, • Option of supplemental Life & AD&D benefits, • Company paid High Deductible Healthcare Benefit Plan, • 401k plan with % match, • Training Opportunities and career progression, • Competitive salaries that reflect the value of skills and experience, • Dynamic and friendly work environment in a rapidly expanding industry with a national presence, • Remote, Hybrid, and In Office schedules available dependent on job responsibilities, • 24-hour Employee Assistance Program/Hotline, • Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options) Job Summary The Distribution Mechanic B will be responsible for, under the supervision of the Distribution Department Foreman, performing maintenance and construction work on the steam distribution system. Additional duties could include welding. A successful candidate for this position is a self-starter who thrives in a fast-paced environment, demonstrates a strong commitment to deadlines and teamwork, is process-oriented with a high sense of ownership, possesses a keen intellectual curiosity, and has a solid foundation in construction, pipefitting, or similar trades. A background that includes experience as a certified pipe welder or familiarity with specialized pipe welding techniques is highly desirable and a significant asset. Core Responsibilities • Must have mechanical skills to handle heavy equipment and materials., • Must be able to cut, fit and thread pipe; install insulation, re-condition valves and steam traps., • Individual must be trained and proficient in traffic control, excavation and shoring in confined workspaces., • In addition to Distribution Mechanic duties, responsibilities could include performing welding work as directed. To be a certified pipe welder, the individual must be qualified to weld pressure piping in accordance with the requirements set forth in the ASME Boiler and Pressure Vessel Code, Section IX. A premium will be paid for this work., • Perform other work assigned of equal or lower classification, if qualified. Working Style to Be Successful in This Role: • Demonstrates exceptional initiative and execution skills, • Collaborative with excellent interpersonal skills including being capable of developing and maintaining positive relationships internally and externally, • Highly analytical with a keen attention to detail, • Delivers high-quality work with speed and accuracy, • Must occasionally work nights, days, weekends and holidays., • Adapts quickly in a dynamic, complex, and fast-paced environment, managing changing priorities effectively, • Self-motivated and proactive, able to work independently with minimal supervision Professional Experience & Knowledge: • High School Diploma or GED., • Class A Commercial Driver's License. Technical Skills & Requirements: • Experience with confined space entry., • Experience with shoring and trenching., • Experience with flagging and/or traffic control., • Training in CPR and First Aid Physical Requirements: • Must be able to work in tight spaces and elevated positions: twisting, turning, bending, and holding arms at / above the head are all common movements; able to lift up to 50 lbs;, • Must be able to clearly see and differentiate all colors., • Must be able to maintain standard threshold of hearing to safely perform job duties., • Must have good eyesight, hearing and manual dexterity., • Must wear all types of PPE including hearing protection, eye protection, all types of hand protection, steel toe footwear, head protection, fall-protection, half-face and full-face respirators, • Presence of high pressure steam, water, dirt, and other elements requiring protective clothing., • Outside working conditions with varying temperatures., • Work in confined spaces (vaults and trenches and shoring)., • Perform air monitoring as needed., • Possible exposure to asbestos containing material (ACM)., • Work performed in customer buildings of varying size, age and structural condition., • Environment includes electrical equipment. Conditions of Employment: • Valid WA State CDL Class A Drivers License, • Only authorized employees are permitted to use company vehicles, this includes Industrial trucks (forklifts, scissor lifts, etc.) and electric vehicles/golf carts. To be an authorized employee, you must be at least 21 years old, hold a current valid Washington State Drivers' license and demonstrate a clean driving record. The driver must be on an approved list for company insurance purposes. Your driving record will be screened as part of the pre-employment process and annually in December., • All certifications/licences must be up to date, • CenTrio strives to create a culture of health and wellness. As of December 1, 2021, and consistent with applicable state law, CenTrio will decline to hire individuals who use nicotine products in Washington Health, Safety & Environment (HSE) CenTrio maintains a steadfast commitment to a proactive safety culture, with HSE being a collective responsibility throughout the organization. Your HSE accountability also encompasses: • Promote, ensure, and maintain a safe and healthy environment for your fellow workers and yourself so that everyone goes home injury-free, • Work in compliance with the provisions of the Occupational Health and Safety Act, Industrial Regulations, Environmental Protection Act and Regulations and HSE policies, programs, and procedures, • Responsible for identifying and reporting workplace HSE hazards and concerns to your supervisor immediately and providing solutions (if aware of any) to address these concerns as requested, • Immediate reporting of all work-related injuries/illness to your supervisor, • Adhere to various PPE requirements of the position which may include hearing protection, eye protection, hand protection, steel toe footwear, head protection, fall-protection, respirators (half-face and full-face) DISCLAIMER The preceding position description is intended to provide the general nature and level of work to be performed by employees within this classification. It is not intended to be a detailed description of the position or be interpreted as a comprehensive listing of all duties, responsibilities, and qualifications required for this position. DIVERSITY STATEMENT We know that our greatest strengths come from the people who make up our team. CenTrio is committed to the creation and nurturing of a diverse community of individuals through inclusive excellence. Diversity involves recognizing the value of differences and the inclusion of all members of the community including those that experience discrimination or under representation. This is a core value of the organization as we strive for a culturally diverse work force that reflect the multicultural nature of the nation and our world and bring unique strengths and abilities which contribute to CenTrio.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Test & Evaluation (BT&E) has an exciting opportunity for a Welder - Production to join our team in Seattle, WA. The ideal candidate will support test fabrication in the Puget Sound area and must be capable of traveling to multiple sites between Seattle, Everett and Tukwila. Position Responsibilities: \n • Perform Shielded Metal Arc Welding (SMAW), Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW), and Gas Tungsten Arc Welding (GTAW) per Boeing's applicable Welding Procedure Specifications (WPS)\n, • Make adjustments during the process of the weld to compensate for variations in thickness, mismatch, gap, equipment anomalies, assembly fit-up, etc\n, • Perform brazing, sil-brazing, oxy-fuel cutting, plasma arc cutting, carbon arc gouging, flame straightening, and flame bending\n, • When a WPS is not required, select electrodes, gas cups, filler metal, weld current, arc voltage travel speed, gas flow, wire size and feed rate per the weld schedule or other furnished information\n, • Measure, layout, set and align. In preparation for or after welding, operate saws, disk grinders, drill presses, and other associated shop equipment to accomplish assigned work\n, • Work in conformance with drawings, specifications, and verbal or written instructions, trade practices, and applicable codes\n, • Must be able to work in all positions and at heights and follow all safety processes as defined\n, • Fabricate shop aids and holding devices to facilitate work assignment set up and align work in welding fixtures and block/clamp/secure parts as necessary.\n, • Maintain cleanliness of welding equipment and general weld area\n, • Request repairs when and as required to maintain welding equipment in optimum operating condition\n, • Organize and maintain welding supplies\n, • Prepare lists for requisition of welding supplies, equipment and material as required\n, • Move, lift and/or turn materials or weld structures as required, utilizing various types of shop lifting equipment\n, • Assist in the identification and documentation of best practices, process standardization and improvement activities associated with pressure piping and structural welding\n, • Perform work described in other maintenance classifications when incidental but necessary to the accomplishment of a welding assignment\n\n Basic Qualifications : \n • 3+ years' experience with welding\n, • 3+ years' experience with reading and interpreting engineering drawings\n, • 3+ years' experience with Gas Tungsten Arc Welding (GTAW)\n\n Preferred Qualification: \n • Possess an active WABO (Washington Association of Building Officials) Card\n, • 3+ years' experience with Gas Metal Arc Welding (GMAW)\n, • 3+ years' experience welding/cutting operations on steel/aluminum and various other metals all types of metals\n\n Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Shift: This role is primarily 1st shift; however, there may be additional shift requirements to support program objectives. Union: This is an hourly position governed by the International Union of Operating Engineers (IUOE) Local 302 collective bargaining agreement. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Additional Information: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $35.00/hr. to start, with the potential to earn up to $61.48/hr. as the max rate. Applications for this position will be accepted until May. 07, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Title Aluminum TIG Welder About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Aluminum TIG Welder REPORTS TO: Production Superintendent PAY RANGE: $25.00 - $35.00/hourly DOE SUMMARY The Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the GTAW (Gas Tungsten Arc Welding) process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Prioritize safety and adhere to quality standards during all aluminum welding operations., • Configure welding machines according to job requirements or Welding Procedure Specifications for GTAW aluminum welding., • Utilize personal basic tools and equipment for welding tasks if not provided by the workplace., • Perform aluminum welding based on the required GTAW process and parameters., • Strictly follow welding procedure specifications for GTAW aluminum welding., • Prepare and set up welding cells for serial production runs of aluminum components., • Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities., • Adhere to all company policies and rules., • Demonstrate keen attention to detail and focus on assigned tasks., • Comply with safety regulations and maintain high-quality standards., • Collaborate with team members to enhance productivity and efficiency., • Assist in preparing aluminum products for shipment., • Report any hazardous work conditions or practices to the supervisor., • Ability to understand and follow both verbal and written instructions., • A willingness to learn and display a dependable work ethic., • Knowledge of welding equipment, including proper setup and usage for aluminum GTAW welding., • Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals., • Familiarity with the metric system., • Capable of standing continuously for extended periods., • High school graduate or GED, • Six months to one-year of relevant experience and/or training in aluminum welding., • May be made to enable qualified individuals with disabilities to perform essential job functions. Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Job Description Job Title: Pipefitter/Welder Job Purpose and Position Overview: Snow & Company is seeking talented and skilled Combo Pipefitters/Welders to join our team! We are looking for positive, motivated self-starters with a strong work ethic who can follow direction and work efficiently with minimal supervision. As a team-oriented company, we value individuals with a collaborative and innovative thought process. Given our quick turnaround times and strict deadlines, candidates must thrive in a fast-paced environment, demonstrate attention to detail, and maintain a positive, can-do attitude. We need individuals who are deadline-driven, have a strong commitment to safety, and can consistently exhibit excellent attendance. Our ideal candidates will take pride in customer satisfaction, have high integrity, and be dependable. We offer rewarding jobs and take pride in delivering exceptional quality work. We’re currently involved in some interesting, high-impact projects, including two cutting-edge electric tugboats, and an 8-year contract to build advanced workboats for the US Navy. It’s an exciting time to be part of our team as we push the boundaries of innovation and craftsmanship! Key Responsibilities: • Read and interpret blueprints, drawings, and layout plans., • Fit and tack weld steel and aluminum parts for hulls, bulkheads, decks, pipe, and other marine structures., • Proficiently perform Flux-core welding and pipefitting based on job requirements., • Ensure structural integrity of welds to precise dimensions., • Set up and operate fabrication machines such as saws, shears, brakes, grinders, etc., • Measure, cut, and grind materials to precise dimensions using shipyard tools and equipment., • Maintain tools, equipment, and work area in clean, orderly condition., • Collaborate with engineers, supervisors, and other trades and team members on design modifications and troubleshooting., • Follow all shipyard safety regulations and wear appropriate PPE including respirators, fall protection, and fire-resistant clothing., • Work in confined spaces, at heights, and in various weather conditions as necessary., • Document work performed and complete required job paperwork. Essential Skills: • This position is 90% dual shield/FCAW and we are currently only seeking candidates with a strong skill set of dual shield/FCAW experience., • Proven experience as a fitter welder or similar role (typically 2+ years)., • Proficient in reading and interpreting technical drawings and blueprints., • Strong understanding of metal types, welding techniques, and fabrication tools., • Ability to lift and carry heavy materials (up to 50 lbs) and stand for long periods., • Welding certification (e.g., AWS, ASME, WABO) is a plus. Physical and Environmental Demands: The work environment is a dynamic, fast-paced shipyard with moderate to loud noise levels due to ongoing production activities. Job duties are performed in production areas and onboard vessels and require: • The ability to walk to and from job sites, climb inclined stairways, and use vertical ladders, • Frequent bending, squatting, crawling, twisting, standing, walking, sitting, and use of hands/fingers for various tasks, • Occasional reaching, climbing, balancing, stooping, kneeling, and crawling, • Frequent lifting of up to 20 lbs, with occasional lifting of up to 50 lbs, • The ability to work in extreme temperatures and conditions, including areas with limited ventilation, • The ability to enter and work in confined spaces, such as manholes, • The ability to work at heights, • Frequent use of a respirator, • Wearing required safety gear, including a hard hat, gloves, safety glasses, and protective clothing Pay and Benefits: • $25 - $40 / hour, • Full time, overtime non-exempt position, • Overtime may be available, • Positive and supportive work environment, • 100% paid medical insurance for employees, 80% for spouses and dependents, • Comprehensive dental insurance, • Vision insurance, • Life insurance options available, • 401(k) retirement plan with employer match up to 5%, • Paid Time Off Plan About Snow & Company: Snow & Company is a leading boatbuilding and ship repair company located in the Ballard neighborhood of Seattle. We specialize in constructing commercial vessels for the fishing industry, government agencies, tugboat operators, aquaculture businesses, and more. In addition to vessel construction, we provide comprehensive overhauls and repair services. Our modern facilities include enclosed fabrication halls and waterfront repair spaces, all situated along the picturesque Ship Canal. Conveniently located on the Burke-Gilman Trail and just one block from the Metro bus stop, Snow & Company is a commuter-friendly workplace. Equal Opportunity Employer: Snow & Company, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment, regardless of race, color, religion, sex, national origin, sexual orientation, gender identity, protected veteran status, age, disability, or genetic information. In addition to federal laws, Snow & Company complies with all applicable state and local nondiscrimination laws. For more information, check out our website at

Job Description Apply here and only here: Date posted: Dec 12, 2025 Pay: $95,000.00 - $100,000.00 per year + bonus Application Process: Apply here: • Complete written interview, • Submit cover letter, resume & portfolio Job description: We’re Hiring! Join GRAYL as our next Product Development Engineer. We build industry-leading water treatment products that empower adventure for our community. Our new hire will help bring novel water treatment devices to life, create cutting edge designs and solve challenging engineering riddles. You’ll be required to draw, cad, prototype new designs, then test, learn and improve. We’re looking for a CAD wizard who is passionate about solving technical problems and building, testing and delivering to market the highest quality products. At GRAYL, we don't just build products; we engineer essential gear for life's most challenging expeditions. Our durable, best-in-market purifiers are crafted to withstand the harshest conditions, empowering self-reliant adventure for those who dare to explore. Beyond innovation, we're driven by purpose: we proudly contribute 1% of annual sales revenue to non-profit environmental organizations, and our team enjoys 2 paid volunteer days to support causes they believe in. Hybrid position - 2-3 days/week in our Seattle office. 4-6 weeks per year of travel, including travel abroad, nights in tents, and dirt under fingernails. Our new colleague: The Product Development Engineer works with a small, talented crew to bring products from proof-of-concept to on-the-shelf goods. This position assists in researching materials and technologies and market potential, uses DFM-influenced CAD to design, build and test prototypes, collaborates with design and manufacturing teams to bring products to life. This individual will effectively communicate across the company to build support for - and receive feedback about - your projects, from a variety of stakeholders. Our ideal candidate is fueled by a passion for solving water problems on behalf of our customers, who are the most interesting and well-traveled people in the world. You have a proven track record of bringing innovative products from concept to market. You thrive in a collaborative environment, valuing team success over individual accolades. Organized, adaptable, and a natural problem-solver, you embrace ambiguity and are always ready to evolve your approach as new insights emerge. Our ideal candidate has spent time in the wilds as a member of one or more of our target markets (camp, hunt, overland, MTB, climb/alpine, bushcraft, travel and military). You’ve been thirsty and needed to rely on unsafe water. You have great energy, contribute positively outside their own projects, and bring a roll-up-your-sleeves attitude. The Work: • Use CAD, 3D prints, and sketching to efficiently explain ideas for prototyping and tooling Please don’t apply if you are not highly proficient in CAD., • Understand our consumer's needs and pain points to drive research into the feasibility of technology, materials, and market potential. Share findings in clear, concise and convincing ways to stakeholders, • Experience sourcing materials, working with 3rd party factories across a diverse supply chain., • Build minimum viable prototypes demonstrating the how and and why. Put stuff together using 3d printing, saws, glue and trips to Lowe’s, • Test the prototypes- use both your own skills as well as external labs. Create protocols and tests to ensure prototypes meet the high standards demanded by GRAYL’s customers, • Share the magic: show and tell findings with colleagues, share models, prototypes and test results with colleagues in a clear and energetic manner, • Collaborate with product managers, developers, content strategists, user researchers, and other designers, • Nurture GRAYL’s culture: work hard, play outdoors, love nature, • Work collaboratively with Product, Research and Engineering partners from concept through completion and future iterations, • Work with industrial design team to refine the design and character while maintaining engineering requirements, • Stay on top of industry trends and emerging technologies, • Travel regularly - 5-7 international and domestic trips year year., • Live in or near Seattle. Work in the office 2-3 times per week (flexible schedule). Who you are: • Empathetic. You are relentlessly obsessed with the end user, always seeking to understand our customers' needs and fiercely advocating for their experience, • Mechanical aptitude. Be a technical problem solver. Know how stuff works and figure out how to build it. Able to create and test potential solution paths simultaneously., • High-level of craft. You have excellent craft and attention to detail, understanding how small nuances interact to create a seamless, intuitive design., • Collaborative. Listen to and empathize with different perspectives, bring good energy to hard moments and do what you say., • Adaptable. Embrace iteration and work with pace, bringing vision and direction in the midst of ambiguity., • Tinkerer. Tinkerer. You're a natural maker, surrounded by tools, with an insatiable curiosity for how things work., • Entrepreneurial mindset. You understand the larger picture and are eager for your projects to benefit the company and the customer. Hard Skills: • CAD proficiency. This is a core aspect of your job. You work efficiently and creatively CAD (must use OnShape, learned easily from Solidworks)., • Understand manufacturing techniques. Injection molding, over molding and blow molding, metal forming and casting, sonic welding, etc. Basic understanding of electronics and the principles of tool making., • Working knowledge of consumer goods manufacturing: plastics, metals and fabrics. Interest and ability to rapidly become an expert., • 3-5 years experience in product development for physical products. Experience with high-quality packaged consumer products is ideal, not required. Details: Job Type: Full-time Benefits: • Stock option plan, • 401(k) matching, • Health, vision and dental insurance, • Employee discount, • Flexible schedule, • Paid time off, • Parental leave, • Relocation assistance GRAYL Product Development: GRAYL PD is a small, focused team working on big ideas. Our foundation is built on our patented, breakthrough innovation: a fast, efficient way to filter and purify water. Looking ahead, we have a strong product pipeline and we're seeking a creative, hardworking engineer to help us bring these ideas to life. About GRAYL Seattle-based GRAYL® makes innovative water purifiers for international travelers and outdoor explorers so their adventures can be safe, self-reliant and awe inspiring. We are brand focused, quality obsessed and take care of our customers. Since 2013 GRAYL purifiers have hydrated more than a million adventurers. GRAYL believes the greatest moments of life occur when one moves beyond their comfort zone, takes risks, builds connections with different cultures. GRAYL is distributed world-wide and is a member of 1% for the Planet® contributing a portion of every sale to non-profit organizations that protect and preserve the natural environment. Company DescriptionAbout GRAYL Seattle-based GRAYL® makes innovative water purifiers for international travelers and outdoor explorers so their adventures can be safe, self-reliant and awe inspiring. We are brand focused, quality obsessed and take care of our customers. Since 2013 GRAYL purifiers have hydrated more than a million adventurers. GRAYL believes the greatest moments of life occur when one moves beyond their comfort zone, takes risks, builds connections with different cultures. GRAYL is distributed world-wide and is a member of 1% for the Planet® contributing a portion of every sale to non-profit organizations that protect and preserve the natural environment.About GRAYL\nSeattle-based GRAYL® makes innovative water purifiers for international travelers and outdoor explorers so their adventures can be safe, self-reliant and awe inspiring. We are brand focused, quality obsessed and take care of our customers. Since 2013 GRAYL purifiers have hydrated more than a million adventurers. GRAYL believes the greatest moments of life occur when one moves beyond their comfort zone, takes risks, builds connections with different cultures. GRAYL is distributed world-wide and is a member of 1% for the Planet® contributing a portion of every sale to non-profit organizations that protect and preserve the natural environment.

Job Description Overview Amerit Fleet Solutions, one of the leading fleet maintenance companies in the US, is looking to hire a skilled Diesel Mechanic! The Diesel Mechanic is responsible for timely repair and maintenance of light - heavy duty fleet vehicles, trailers, and various equipment to ensure a safe and efficient operation. This position is multi-functional. Strong knowledge of the maintenance, troubleshooting and repair of these three types of units. The mechanic position also requires a high level of proficiency and working knowledge related to diesel engine diagnostics, brakes, tires, AC, and PM services. Compensation: Competitive Hourly Pay - Paid weekly, every Friday! Pay Range: $40.00 - $52.00 / Hour (Depending on experience) 2nd Shift: Monday - Friday: 2:00pm - 10:30pm The benefits of belonging – what’s in it for you? • Full benefits within 30 days, • Medical, dental, vision, prescription drug coverage, life insurance, disability insurance, • 401(k) match program, • Paid vacation, holidays, and sick time, • Commitment to your safety through boot and prescription safety glasses reimbursement, • Career and learning development with an extensive training program through our Amerit University, • Employee referral program, up to $500 bonus, • ASE certification program with fee reimbursement and bonus, • Employee recognition platform that includes opportunities to redeem points for merchandise, • Employee assistance program (EAP), • 24/7 nurse triage line, • Employee discounts on cell phone service and entertainment tickets, • Employee resource groups (ERGs) that foster inclusion, • Wellness and fitness program through our providers, • Must update work orders, close work orders, and work with drivers, • Prepare vehicle records and report both manually and on a computer, • Perform safety inspections of equipment and prepare safety documentation required, • Inspect and perform work on the under parts of vehicles, • Access any area of the equipment or vehicle to perform necessary maintenance, • Move parts to and from the job site and remove or install these parts on vehicle, • Comply with all applicable laws/regulations, as well as company policies/procedures, • Perform repairs and preventative maintenance to a fleet of light-duty to heavy-duty trucks, • The fleet also includes CAT equipment, generators, aerials, forklifts, and other equipment, • At least 5 years’ experience performing vehicle maintenance or must possess auto or diesel technology diploma from an accredited technical school, • Experience with Peterbilt, Kenworth, Ford, Chevy Linde, Hyster assets preferred, • Commercial Driver’s License Class - A or B (Preferred), • Must be able to operate a manual transmission vehicle to determine if operating properly, • Must provide own hand tools & toolbox, • Knowledge of handheld scan tools and the process of diagnosing vehicles, • Ability to read schematics and familiar with process, • Proficient computer skills: knowledge of Excel, Word, Fleet Management Systems, and Email, • Exposure to heavy traffic areas while performing the duties of the job., • Exposure to considerable amounts of dust, diesel fumes and noise., • Exposure to chemicals, oils, greases, or other irritants, • Access any area of the equipment or vehicle to perform necessary maintenance, • Ability to move and position heavy objects., • Ability to bend, stoop, crouch, kneel and crawl to repair vehicles #DieselMechanic #Lead #Mechanic #Hiring #NowHiring #MechanicJobs #DieselTechnician #DieselTech #Class8 #Class7 #DOTInspections #Diesel #AirBrake #Welding #Wheelseals #Shop #uti #LATTC #LincolnTech #Tukwila #Seattle #Seatac INDSV

Job Description Excellence. Innovation. Integrity. Passion. Catcher processor engineer experience and Chief Engineer license preferred. The Chief Engineer directs and oversees the operation, maintenance, and repairs of the vessel’s operating systems: diesel engines, generators, refrigeration, electrical and hydraulic equipment, water making and sanitary equipment, deck machinery, factory equipment, pumps, cooling, and conveyor systems. Chief Engineers also maintain the engine room and other logs as required by the company or other agencies. Chief Engineers are also responsible for fueling the vessel and transferring liquids, refrigerants, and fuel onboard. Chief Engineers are expected to work closely with Port Engineering staff to coordinate and complete shipyard projects. Essential Duties: Chief Engineers must be able to: • Operate, maintain, and repair machinery and equipment onboard the vessel including but not limited to:, • Engines, generators, • Hydraulic systems, pumps, motors, • Refrigeration equipment, • Sewage and water treatment systems, • Electrical, steering, and cooling equipment, • Various power and hand tools, welding equipment, and two-way radios, • Perform work assignments on any or all the above systems., • Maintain or repair fish hauling equipment located on the trawl deck as directed., • Transfer bulk petroleum and refrigeration products., • Maintain an inventory control system., • Prepare department records and reports as required by the company, USCG, OSHA and other agencies., • Ensure all engineering crew are trained and fully cognizant of the job hazards., • Ensure LOCK OUT-TAGS PLUS procedures are communicated, followed, and enforced., • Resolve technical problems as they occur., • Chief Engineers work at least 16.5 hours per day, 7 days per week., • Work hours may be extended as necessary which may result in uneven shifts and sleep patterns., • While performing the duties of this job, employees and the vessel will be operating in extremely remote and austere locations; often days away from land or dock facilities., • While performing the duties of this job, employees are expected to wear protective clothing and equipment such as rain gear (pants and sleeves), gloves, rubber boots, noise suppression devices, and use as required: hardhat, safety goggles, fire extinguisher, respirator, life preserver and survival suit., • Employees will be exposed to various species of fish; wet, humid, and freezing conditions; fish processing equipment such as headers, movable and stationary conveyor systems, knives, hoists, pressure washers, cleaning chemicals, shovels, buckets, baskets, and aluminum pans., • The noise level in the work environment is usually loud. Employees work onboard a vessel in the ocean which by nature produces varying degrees of motion in the factory. Physical Demands: All employees must be able to: • Board and exit the vessel by gangplank or Jacob’s ladder without assistance., • Board or exit a skiff without assistance in all weather conditions., • Ascend and descend steep stairways and ladders in all temperatures., • Work at least 16 ½ hours per day, 7 days per week for the duration of the contract., • Perform repetitive tasks for extended periods of time., • Stand and walk; lift weights up to 50 pounds., • Use fingers, hands, and arms to push, pull and reach., • Bend and twist., • Stoop, kneel, crouch or crawl., • Work long hours in all kinds of weather., • Work in a cold and wet environment., • Don life jacket, life vest and/or survival suit without assistance. All employees must be able to: • Ability to understand and have the ability to communicate in English for emergency, safety, and training purposes is required., • Use interpersonal and teamwork skills., • Live and work with others in close quarters., • Be away from medical care and supervision for 3+ months at a time., • Share crew quarters, bathroom facilities, and common dining areas with other crew members., • Catcher / processor chief engineer experience., • USCG Basic Firefighting., • USCG Drill Instructor training., • Earned High School Diploma or GED. Education verification will be required prior to hire., • Medical, vision and dental insurance is offered to employees and qualified dependents, if elected., • 401(k) with employer match after one year of employment, if elected., • Meals, snacks, and beverages provided including diverse cuisine options while at sea. (Additional at-sea store available for specialty items to purchase and have deducted from paycheck), • Crew-share compensation This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionSalary: $22-$30 Auto Body Technician Up to $30/hour flat rate Unlimited pay potential! 4x10 schedule available! Join ourmodern and busy collision repair facilityas an Auto Body Technician, where youll restore vehicles to their optimal condition while advancing your skills in a cutting-edge, high-demand environment. What Youll Do • Perform collision repairs, including welding, sheet metal work, and refinishing., • Utilize frame and measuring equipment for precise vehicle restoration., • Conduct vehicle inspections and maintenance to ensure safety and functionality., • Collaborate with team members to meet repair deadlines and maintain high-quality standards., • Maintain a clean, organized workspace and adhere to safety protocols., • Stay up-to-date with industry trends, including repairs on aluminum and electric vehicles. What Were Looking For • 2-5 years of collision repair experience required., • Proficiency in I-CAR welding and experience with frame/measuring equipment., • Highly organized, with the ability to handle multiple tasks effectively., • Proven ability to work both independently and within a team environment., • Must provide your own tools (in working order)., • Valid drivers license with an insurable driving record., • Availability to work Monday Friday, 8:00 a.m. 5:00 p.m. or a 4x10 schedule! Why Join Us? • Competitive pay: $22-$30 per hour flat rate based, • Top-tier workspace with state-of-the-art tools and support, including laptop access and I-CAR training., • Certifications with leading manufacturers, including Tesla., • Comprehensive benefits, including:, • Health, dental, and vision insurance., • 401(k) with matching., • Paid time off., • Opportunities for growth and professional development in the rapidly evolving collision repair industry. Location • Des Moines, WA.Must relocate before starting work. If youre an experienced collision repair technician looking to work in a high-demand, innovative environment, apply today!

Job Description Who We’re Looking For We are seeking an accomplished, motivated, and versatile Subject Matter Expert (SME) in NDT-E to join our team. This is a pivotal, high-impact position supporting a multidisciplinary group of engineers, analysts, and technicians who perform nondestructive testing and evaluation (NDT-E) on critical infrastructure—bridges, dams, pavements, and other civil structures. The ideal candidate is a highly experienced engineer with deep expertise in NDT-E methods, especially related to structural systems, corrosion-resistant coatings, and thermal barrier technologies. You will play a key role in defining technical strategy, ensuring quality and performance, mentoring field staff, and supporting business development and growth initiatives. What You’ll Do • Lead the development of technical strategies, QA/QC protocols, and field methodologies for NDT-E projects., • Oversee project data reviews and collaborate with analysis teams to guide decision-making, timelines, and deliverables., • Provide hands-on mentorship and leadership to junior engineers and field crews, ensuring adherence to state-of-the-art equipment, techniques, and in-house certifications., • Conduct technical research on emerging technologies, tools, and methods in NDT-E for civil infrastructure., • Represent BDI at conferences, trade shows, and client meetings—supporting business development efforts and elevating BDI’s brand as a leader in NDT-E services., • Collaborate across departments to align project schedules, technical analysis, and financial goals with client and company expectations., • Advanced expertise in acoustic, ultrasonic, electromagnetic, and electrochemical NDT-E techniques, including data processing, analysis, and reporting., • Deep understanding of bridge, dam, and heavy civil infrastructure systems and the interpretation of structural analysis data., • Extensive field experience in NDT-E with a strong track record of producing high-quality technical reports., • Strong communication skills—able to convey complex information clearly to technical and non-technical audiences., • Familiarity with structural instrumentation, monitoring systems, and various NDT tools and methods such as ground-penetrating radar and ultrasonic shear wave tomography (MIRA)., • Recognized in the industry as a trusted expert and thought leader in NDT-E., • Motivated by solving complex technical problems and mentoring the next generation of engineers., • Organized, detail-oriented, and process-driven, with the ability to manage multiple priorities., • Collaborative, flexible, and ready to grow with a fast-moving, innovative organization., • 10+ years of experience in NDT-E and/or structural instrumentation., • Master’s degree in Civil, Mechanical, Metallurgical, or Materials Engineering., • Technical expertise in concrete and steel NDT-E applications using ultrasonics, GPR, thermography, and electrochemical techniques., • Experience with material sampling and testing (e.g., concrete coring, chloride testing, petrography)., • Willing to travel 25–50% for project support, client meetings, and industry events., • Strong written, verbal, and visual communication skills., • PE license preferred., • ASNT Level II in UT, PAUT, MT, and/or PT, • Certified Welding Inspector (CWI) with AWS D1.5 experience Salary Range: $150,000 - $200,000 per year We offer a comprehensive, industry-leading compensation and benefits package designed to support your personal and professional well-being: • Paid time off and paid holidays, • 401(k) with company match: 100% match on contributions up to 3%, plus 50% match on contributions up to 5%, • Competitive medical insurance coverage with generous employer contributions, • Health Savings Account (HSA) with employer funding, • Company-paid life, AD&D, and disability insurance, • Optional dental, vision, hospital, critical illness, accident, and pet insurance This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description The Estimator is responsible for preparing competitive fixed price quotes (labor and material) for maritime ship repair/ refit and industrial repair/ refit. Determine work procedures, crew size, machines/ tools sub-contractors, and materials required to accomplish work at competitive price and acceptable margins. Conduct ship checks/ in order to properly evaluate the scope of work and obtain accurate bill of material (BOM) quotes in a timely manner. This position reports directly to the General Manager. Essential Duties and Responsibilities: This position is responsible for the following: Other duties may be assigned. • Prepare cost estimates for product manufacturing, projects or services to aid management in bidding on or determining price of product or service., • Prepare competitive fixed price quotations (both labor and material), for maritime ship repair / refit and industrial repair / refit., • Determine work procedures, crew size, machines/tooling, sub-contractors, material, accessories required to accomplish work at competitive price and acceptable margins., • Coordinate with Walashek staff and trades as needed in order to gather information and process requirements for accomplishment of work., • Conduct ship-checks / site-checks as required in order to properly scope work., • Obtain accurate bill of material (BOM) quotations in a timely manner., • Maintain relationships with industry suppliers, vendors and clients., • Maintain and update contract pipeline in coordination with General Manager, Program Managers and Chief Estimator., • Build estimates and quotes using approved corporate policies., • Ability to read and interpret blueprints, sketches, drawings and technical manuals in order to machine parts and products according to specifications., • Excellent interpersonal and communication skills., • High performance and a strong team player., • Ability to work under deadlines and schedule pressures with minimal supervision., • Commitment to company values and safety program, • Ability to operate all Microsoft Office applications, to include Microsoft Project, • Must be able to pass a drug screen, • Must be able to obtain access to base as required (DBIDS/TWIC credentials), • High School Diploma and/or some college or technical training preferred., • 5-10 years-experience in estimating and planning, • Open-air conditions such as noisy, hot, cold, as well as in an office controlled environment., • May have to visit projects aboard ships, rigs both on and offshore as well as confined spaces. Must wear hearing, eye, head protection and proper PPE when required., • Visits may require standing on a variety of surfaces and at differing angles, bending over, crouching and climbing up and over obstructions such as scaffolding, ladders, and internal barge and boat structural members. We provide paid holidays, PTO, paid medical, dental and vision benefits and 401(k) benefits. Walashek Industrial & Marine Inc. is an EEO/Disability/Vets Employer Job Posted by ApplicantPro

Job Description Job Requirements: Accurately diagnose, repair, and maintain all parts and components on heavy duty trailing equipment in a timely manner and quality fashion, including but not limited to the following: • Perform quality preventive maintenance services and DOT inspections on semi-trailers and dollys, • Diagnose and repair air brake systems, ABS, suspension, and electrical systems, • Perform welding and fabrication on steel, stainless and aluminum, • Complete all body repairs on semi-trailers including repairing or replacing side panels, roofs, headers and frame rails, • Repair and replace roll-up doors and swing doors, • Assist other mechanics as needed, • Have good communication skills and be able to work independently and as a team member, • Operate Company vehicles in accordance with local, state, federal and Company policies and safe driving practices, • Perform occasional facility maintenance for the Company and/or customer’s facilities, • Perform all other duties as assigned by Lead Mechanic, Shop Foreman, Area Fleet Manager or Shop Coordinator, • Thoroughly, timely, neatly, and accurately document repairs and maintenance including a complete accounting of all labor hours, parts and materials used through maintenance software and daily worksheets, • Provide excellent customer service and maintain a positive working relationship with all fleet, customer, and operations personnel, • Display professional conduct with customers, co-workers, outside suppliers and contacts, • Maintain safe and clean work areas, • Take responsibility for and demonstrate safe work practices, • Adhere to Company and OSHA safety guidelines, • Operate a forklift as needed to perform repairs and move heavy parts Qualifications: • Minimum 1 year experience as a heavy-duty trailer mechanic, • Valid driver’s license and good driving record may be required depending on job location, • Pass a criminal history background screen as required by our customer base, • Be able to lift and install all parts required to perform the job including heavier parts such as brake drums, tires, flywheels, clutches, starters, suspension spring packs, etc. Benefits include: medical, health savings plan, dental, vision, vacation, sick pay, holiday pay, retirement plan, life insurance, uniforms provided keywords: truck, trailer, trailing, auto, automotive, automobile, tech, technician, mech, mechanic, delivery, van, welder, welding, driver, CDL, heavy-duty, heavy duty, duty, journey, journeyman, entry, skill, skills, skilled, Napa, Service, Sales, mobile, growth, career, diesel, engine, motor, brakes, diagnostic, diagnosing, DOT, electronic, scanner, electronics, gas, gasoline, propane, hydraulic, PM, preventive maintenance, oil, semi, semi-trailer, tractor, pickup, benefits, medical, dental, vacation, vision, retirement, tool, tools, shop

Job Description Keep our City Moving! We are growing our fleet Mechanic team. The City of Des Moines is looking for a skilled Journey-Level Fleet Mechanic to keep our city running strong. From heavy-duty trucks and graders to small equipment and power tools, you'll tackle a wide variety of hands-on work that directly serves our community. If you have 3+ years of diversified fleet experience and either have a Class A CDL or motivated to get one, we want you on our team. Closing Date Initial Screening date of May 04, 2026. Open until filled. Salary: $6,697 - $8,139 DOE To Apply Complete the online application at attach a resume and cover letter explaining how you meet the requirements. Nature of Work Under the general supervision of the Maintenance Superintendent, this position performs skilled work in the installation, maintenance, and repair related to the upkeep of the City's fleet including all vehicles, equipment and small tools. The work is characterized by a substantial volume of skilled tasks in the maintenance and repair of all City motorized equipment including specialized machines. Duties require proficiency in operating computers, electronic testing equipment, and hand and power tools. Work is performed with considerable independence in accordance with specific instructions and defined procedures and schedules. This position plans and carries out assignments and handles problems and deviations in accordance with instructions, policies, procedures and/or accepted practices. Work is evaluated for technical soundness and conformity to practice and policy. Job Duties and Responsibilities • Performs journey level maintenance and mechanical repair of automobiles, light and heavy-duty trucks, tractors, graders, mowers, and all other types of City power driven equipment in accordance with standard maintenance procedures., • Operates both light and heavy equipment during pick up, delivery, and road testing of equipment., • Analyzes shop operations, make recommendations to management and implement shop productivity improvement programs., • Assist in the selection of fleet vehicles and equipment to be purchased., • Manage and maintain the repair shop to the proper safety standards., • Picks up and delivers parts and vehicles when required., • Inspects vehicle/equipment for repair, diagnoses problems, and specifies repair and parts required. Makes recommendations for any substantial repairs as needed., • Performs job site repairs on equipment and vehicles as needed., • Inspects driver's report of equipment malfunctions or deficiencies and determine necessary repairs, which are made in accordance with the latest standards and techniques., • Tests and inspects completed work in order to ensure proper performance., • Maintains records and complete repair reports. Records accurate readings from fuel pumps. Completes all reports and paperwork on a timely basis., • Participates in the Public Works safety program., • Organizes, assigns and directs work for assistant mechanic., • Performs repair and maintenance such as tune-ups and filter changes on automobiles, light and heavy trucks, tractors, graders, mowers, and all other types of equipment in accordance with established procedures. Replaces hoses and belts., • Replaces batteries and does electrical component installation. Replaces light bulbs and does wire repair work., • Cleans and maintains City vehicles., • Performs safety checks., • Welds and fabricates parts as needed., • Performs lubrication and oil changes as required., • Repairs, changes, and balances tires as required., • Performs cleaning and maintenance of repair shop by cleaning tools, equipment, floors, and work benches., • Assists the Public Works Maintenance Department when needed or in emergency related situations., • Consults with vendors and sales persons as required., • Manages supply and outside repair budgets., • Establishes and maintains cooperative, effective working relationships with coworkers, other City employees, vendors, and the general public using principles of good customer service., • Reports for scheduled work with regular, reliable and punctual attendance., • Standard practices and techniques for maintenance and repair of a large centralized fleet of automobiles, light and heavy trucks including all types of grounds maintenance and construction equipment;, • Principles of gasoline and diesel engines;, • Hydraulic and electrical systems;, • Practices, methods, and tools used in acetylene and arc welding;, • New technology and service requirements;, • Occupational hazards and safety precautions of a fleet repair facility;, • Engine and general repair work;, • Safety requirements and specifications of various types of vehicles and equipment;, • Methods, tools, equipment, and materials used in fleet maintenance and repair;, • Use hand and machine tools, including but not limited to, electronic testing equipment;, • Analyze, diagnose, and repair mechanical problems;, • Ability to troubleshoot, do research, and determine proper and correct methods to complete maintenance repair objectives., • Knowledge of parts, materials, supplies, tools, and equipment required in the operation of an equipment repair shop;, • Ability to operate automotive equipment;, • Locate and correct mechanical defects using the proper tools, parts, or equipment for specific repair problems;, • Use initiative and resourcefulness in handling repair problems;, • Acquire knowledge of the operating details, procedures, specialized equipment and other characteristics of specified assignment;, • Understand and carry out complex oral and written instructions;, • Ability to prioritize and perform skilled tasks with little or no supervision;, • Ability to acquire knowledge and skill of the manual tasks and other characteristics involved in work assignments;, • Ability to apply common sense understanding to execute oral, written, and diagrammatic instructions;, • Interpersonal communication and relation skills using tact, patience, and courtesy;, • Personal computers and their basic use; ability to work with maintenance management systems database Excel Word Outlook, • Correct usage of English grammar, spelling, punctuation, and vocabulary;, • Ability to make arithmetic calculations involving fractions, decimals, and percentages;, • Graduation from high school or equivalent., • Must have Possession of a Class "A" commercial driver's license (CDL) or a CDL Learner's Permit upon hire. (employees hired with a CDL Learner's Permit must obtain the full CDL with required endorsements within six months of hire date)., • Possession of a valid traffic flagging and ability to maintain throughout employment., • Possession of a valid First Aid/CPR Card within three months of hire date and maintain throughout employment., • Pre-employment, random, and post-accident drug and alcohol testing is required for this position., • Must pass a thorough background and criminal history check., • Possession of, and the ability to maintain throughout employment, a satisfactory driving record., • Because of the known effects of tobacco use, the City of Des Moines does not hire applicants who use tobacco products.Working Conditions and Physical Abilities, • Shop work is accomplished indoors in a shop/garage environment repairing vehicles and equipment and occasionally in an office environment to complete necessary repair and maintenance logs and other paperwork. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to high, precarious places; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually loud to very loud. Employee may be called out after normal hours for emergency work., • The statements contained herein reflect general details as necessary to describe the principal functions for this job classification, the level of knowledge and skill typically required and the scope of responsibility, but should not be considered an all-inclusive listing of work requirements. Individuals may perform other duties as assigned including work in other functional areas to cover absences or relief, to equalize peak work periods, or to balance the workload., • The physical abilities described above are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The provisions of this job description do not constitute an expressed or implied contract. Any provision contained herein may be modified and/or revoked without notice., • The City of Des Moines is an equal opportunity employer and does not unlawfully discriminate on the basis of race, sex, age, color, religion, national origin, marital status, sexual orientation, veteran status, disability status, or any other basis prohibited by federal, state or local law. Job Posted by ApplicantPro

This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $135,000 per year A bit about us: Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company. We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing. Why join us? • Accelerated Career Growth!, • Competitive Base Salary and Bonus! Job Details Job Details: We are seeking an experienced and dynamic individual to join our team as a Permanent Senior Weld Manufacturing Engineer. This position is an integral part of our manufacturing operations and offers a unique opportunity to be involved in a wide range of processes and technologies. The successful candidate will be responsible for developing, implementing, and improving welding processes and procedures to enhance product quality and productivity. This role requires a deep understanding of various welding techniques, including laser and robotic welding, and the ability to utilize CAD, AutoCAD, and SolidWorks software. Responsibilities: • Develop, implement, and improve welding processes and procedures to enhance product quality and productivity., • Utilize CAD, AutoCAD, and SolidWorks to design and develop welding fixtures and tooling., • Lead the implementation of New Product Introduction (NPI) processes for welding operations., • Apply Lean Manufacturing principles to optimize welding processes and reduce waste., • Collaborate with cross-functional teams to address and resolve manufacturing, quality, and reliability issues., • Train and mentor junior engineers and technicians on welding techniques and procedures., • Conduct root cause analysis of welding defects and implement corrective actions., • Manage welding equipment maintenance and calibration to ensure optimal performance., • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or a related field., • Minimum of 5 years of experience in weld manufacturing engineering., • Proven experience with CAD, AutoCAD, and SolidWorks., • Excellent knowledge of laser and robotic welding techniques., • Strong understanding of Lean Manufacturing principles., • Experience with New Product Introduction (NPI) processes., • Exceptional problem-solving and analytical skills., • Excellent communication and leadership skills., • Ability to work effectively in a fast-paced, team-oriented environment., • Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification is a plus. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Fred Hutchinson Cancer Center is an independent nonprofit organization providing adult cancer treatment and groundbreaking research focused on cancer and infectious diseases. Based in Seattle Fred Hutch is the only National Cancer Institute-designated cancer center in Washington. With a track record of global leadership in bone marrow transplantation HIV/AIDS prevention immunotherapy and COVID-19 vaccines Fred Hutch has earned a reputation as one of the worlds leading cancer infectious disease and biomedical research centers. Fred Hutch operates eight clinical care sites that provide medical oncology infusion radiation proton therapy and related services and network affiliations with hospitals in five states. Together our fully integrated research and clinical care teams seek to discover new cures to the worlds deadliest diseases and make life beyond cancer a reality. At Fred Hutch we value collaboration compassion determination excellence innovation integrity and respect. Our mission is directly tied to the humanity dignity and inherent value of each employee patient community member and supporter. Our commitment to learning across our differences and similarities make us stronger. We seek employees who bring different and innovative ways of seeing the world and solving problems. The Fred Hutch Controls Operating Engineer I/II is a building maintenance technician responsible for independently performing tasks of a skilled nature necessary for the operation maintenance repair testing troubleshooting programming commissioning and installation of the Building Automation Systems for the Fred Hutch campus. The individual has experience with DDC controls systems such as Siemens Delta Controls enteliWeb etc. The individual will also be responsible for supporting other building control systems such as fire systems freezer monitoring elevator operations and emergency generator status. At Fred Hutchinson Cancer Center all employees are expected to demonstrate a commitment to our values of collaboration compassion determination excellence innovation integrity and respect. Individual has responsibility over the building controls operation maintenance and repairs. Additionally when acting as Watch Stander the individual responds to freezers incubators or any other alarms initiated by the Building Automation System. Individual may also be assigned to work with and/or train apprentices and other OEs. • Determine HVAC control strategies for specific pieces of equipment, • Add control loops to the system using a program language equal to BASIC, • Add points to the system, • Create modify or delete control strategies, • Assign sensors and/or actuators to control strategy, • Tune control loops through adjustment of control loop parameters, • Enable or disable control strategies, • Select points to be alarmable and define alarm statuses, • Select points to be trended over a period of time and initiate recording of values, • Install control wiring between control components and pieces of equipment being controlled or monitored, • Calibrate various sensors, • Create graphics, • Create activate and debug building automation programs, • Test and commission various systems including Fire alarm Building Automation Lab Data Acquisition System, • Perform energy audits of existing buildings for the purpose of reducing overall building energy usage, • Update the electronic log respond to emails and communicate as a team player to keep everyone in the loop, • Complete work orders daily assigned by the shop lead in our computerized maintenance management system, • Perform Watch Stander duties on an occasional weekend rotation MINIMUM QUALIFICATIONS: • Must have current Grade III City of Seattle Boiler Operator License or be able to obtain one within 6 months, • Possess and maintain a valid Washington State Drivers License or ID, • Physical skills necessary to climb bend stoop lift and perform tasks utilizing ladders and scaffolds etc., • Must be able to lift 50 lbs, • Dependable on-time and proven good work habits, • Good communications skills, • Able to work a varied schedule including shift work, • High School diploma or equivalent, • Additionally knowledgeable in at least two of the following areas: mechanical plumbing electrical welding steam and hot water systems or refrigeration OE I: A skilled professional who generally has over 5 years of experience in the operation maintenance or repair of one or more of the systems outlined above or the completion of the apprentice program or trade school program. OE II: A skilled professional who has 3-4 years of experience in boiler room operations equipment maintenance construction or similar trades related to mechanical maintenance. OE I: This position is represented by IUOE-302. The hourly contracted rate for this position is a flat rate of $40.70 which is inclusive of a $8.75 Central Pension Fund diversion. OE II: This position is represented by IUOE-302. The hourly contracted rate for this position is a flat rate of $37.18 which is inclusive of a $5.00 Central Pension Fund diversion. Position is eligible for shift differentials premiums for licenses and other wage premiums as governed by the collective bargaining agreement. Although Fred Hutch is not sponsoring most H-1B visas at this time candidates who already hold an H-1B sponsored by another organization and are currently in the U.S. may be eligible for this position. Fred Hutchinson Cancer Center offers employees a ___

Job Description Job Title: Certified Welder Job Purpose and Position Overview: Snow & Company is seeking talented and skilled Steel Welders to join our team! We are looking for positive, motivated self-starters with a strong work ethic who can follow direction and work efficiently with minimal supervision. As a team-oriented company, we value individuals with a collaborative and innovative thought process. Given our quick turnaround times and strict deadlines, candidates must thrive in a fast-paced environment, demonstrate attention to detail, and maintain a positive, can-do attitude. We need individuals who are deadline-driven, have a strong commitment to safety, and can consistently exhibit excellent attendance. Our ideal candidates will take pride in customer satisfaction, have high integrity, and be dependable. We offer rewarding jobs and take pride in delivering exceptional quality work. We’re currently involved in some interesting, high-impact projects, including two cutting-edge electric tugboats, and an 8-year contract to build advanced workboats for the US Navy. It’s an exciting time to be part of our team as we push the boundaries of innovation and craftsmanship! Key Responsibilities: • Read and interpret weld symbols, • Weld steel parts for hulls, bulkheads, decks, and other marine structures., • Proficiently perform flux-core welding based on job requirements., • Ensure structural integrity of welds to precise dimensions., • Maintain tools, equipment, and work area in clean, orderly condition., • Collaborate with engineers, supervisors, and other trades and team members on troubleshooting., • Follow all shipyard safety regulations and wear appropriate PPE including respirators, fall protection, and fire-resistant clothing., • Work in confined spaces, at heights, and in various weather conditions as necessary., • This position is 90% dual shield/FCAW and we are currently only seeking candidates with a strong skill set of dual shield/FCAW experience., • Proven experience as a welder or similar role (typically 2+ years)., • Proficient in reading and interpreting weld symbols., • Strong understanding of metal types and welding techniques., • Ability to lift and carry heavy materials (up to 50 lbs) and stand for long periods. The work environment is a dynamic, fast-paced shipyard with moderate to loud noise levels due to ongoing production activities. Job duties are performed in production areas and onboard vessels and require: • The ability to walk to and from job sites, climb inclined stairways, and use vertical ladders, • Frequent bending, squatting, crawling, twisting, standing, walking, sitting, and use of hands/fingers for various tasks, • Occasional reaching, climbing, balancing, stooping, kneeling, and crawling, • Frequent lifting of up to 20 lbs, with occasional lifting of up to 50 lbs, • The ability to work in extreme temperatures and conditions, including areas with limited ventilation, • The ability to enter and work in confined spaces, such as manholes, • The ability to work at heights, • Frequent use of a respirator, • Wearing required safety gear, including a hard hat, gloves, safety glasses, and protective clothing Pay and Benefits: • $25 - $40 / hour, • Full time, overtime nonexempt position, • Overtime may be available, • Positive and supportive work environment, • 100% paid medical insurance for employees, 80% for spouses and dependents, • Comprehensive dental insurance, • Vision insurance, • Life insurance options available, • 401(k) retirement plan with employer match up to 5%, • Paid Time Off About Snow & Company: Snow & Company is a leading boatbuilding and ship repair company located in the Ballard neighborhood of Seattle. We specialize in constructing commercial vessels for the fishing industry, government agencies, tugboat operators, aquaculture businesses, and more. In addition to vessel construction, we provide comprehensive overhauls and repair services. Our modern facilities include enclosed fabrication halls and waterfront repair spaces, all situated along the picturesque Ship Canal. Conveniently located on the Burke-Gilman Trail and just one block from the Metro bus stop, Snow & Company is a commuter-friendly workplace. Equal Opportunity Employer: Snow & Company, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment, regardless of race, color, religion, sex, national origin, sexual orientation, gender identity, protected veteran status, age, disability, or genetic information. In addition to federal laws, Snow & Company complies with all applicable state and local nondiscrimination laws. For more information, check out our website at

Job Description Job Purpose and Position Overview: Snow & Company is seeking talented and skilled Steel Fabricators and Welders to join our team! We are looking for positive, motivated self-starters with a strong work ethic who can follow direction and work efficiently with minimal supervision. As a team-oriented company, we value individuals with a collaborative and innovative thought process. Given our quick turnaround times and strict deadlines, candidates must thrive in a fast-paced environment, demonstrate attention to detail, and maintain a positive, can-do attitude. We need individuals who are deadline-driven, have a strong commitment to safety, and can consistently exhibit excellent attendance. Our ideal candidates will take pride in customer satisfaction, have high integrity, and be dependable. We offer rewarding jobs and take pride in delivering exceptional quality work. We’re currently involved in some interesting, high-impact projects including two cutting-edge electric tugboats, and an 8-year contract to build advanced workboats for the US Navy. It’s an exciting time to be part of our team as we push the boundaries of innovation and craftsmanship! Key Responsibilities: • Read and interpret blueprints, drawings, and layout plans., • Fit and tack weld steel and aluminum parts for hulls, bulkheads, decks, and other marine structures., • Proficiently perform Flux-core welding based on job requirements., • Ensure structural integrity of welds to precise dimensions., • Set up and operate fabrication machines such as saws, shears, brakes, grinders, etc., • Measure, cut, and grind materials to precise dimensions using shipyard tools and equipment., • Maintain tools, equipment, and work area in clean, orderly condition., • Collaborate with engineers, supervisors, and other trades and team members on design modifications and troubleshooting., • Follow all shipyard safety regulations and wear appropriate PPE including respirators, fall protection, and fire-resistant clothing., • Work in confined spaces, at heights, and in various weather conditions as necessary., • This position is 90% dual shield/FCAW and we are currently only seeking candidates with a strong skill set of dual shield/FCAW experience., • Proven experience as a fitter welder or similar role (typically 2+ years)., • Proficient in reading and interpreting technical drawings and blueprints., • Strong understanding of metal types, welding techniques, and fabrication tools. The work environment is a dynamic, fast-paced shipyard with moderate to loud noise levels due to ongoing production activities. Job duties are performed in production areas and onboard vessels and require: • The ability to walk to and from job sites, climb inclined stairways, and use vertical ladders, • Frequent bending, squatting, crawling, twisting, standing, walking, sitting, and use of hands/fingers for various tasks, • Occasional reaching, climbing, balancing, stooping, kneeling, and crawling, • Frequent lifting of up to 20 lbs, with occasional lifting of up to 50 lbs, • The ability to work in extreme temperatures and conditions, including areas with limited ventilation, • The ability to enter and work in confined spaces, such as manholes, • The ability to work at heights, • Frequent use of a respirator, • Wearing required safety gear, including a hard hat, gloves, safety glasses, and protective clothing Pay and Benefits: • $25 - $40 / hour, • Full time, overtime non-exempt position, • Overtime may be available, • Positive and supportive work environment, • 100% paid medical insurance for employees, 80% for spouses and dependents, • Comprehensive dental insurance, • Vision insurance, • Life insurance options available, • 401(k) retirement plan with employer math up to 5%, • Paid Time Off plan Equal Opportunity Employer: Snow & Company, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment, regardless of race, color, religion, sex, national origin, sexual orientation, gender identity, protected veteran status, age, disability, or genetic information. In addition to federal laws, Snow & Company complies with all applicable state and local nondiscrimination laws. For more information, check out our website at

Job Description Job Title: Shipyard Laborer Job Description The Shipyard Laborer supports maintenance and repair activities aboard U.S. Navy vessels by performing fire watch, general labor, and trades assistance. This role involves monitoring hot work such as grinding, welding, and cutting metal, setting up and cleaning work areas, moving materials and tools, and assisting marine trades personnel with repair and maintenance tasks. The position requires regular heavy lifting of 40–50 pounds and the flexibility to shift between fire watch, labor, and trades support duties based on daily needs. Responsibilities • Perform vigilant fire watch duties during grinding, welding, cutting, and other hot work to help maintain a safe work environment., • Set up work areas by staging tools, equipment, and materials needed for ship repair and maintenance activities., • Clean up work areas after tasks are complete, including removing debris, organizing tools, and maintaining general housekeeping standards., • Move, carry, and position materials, tools, and equipment throughout the shipyard and aboard vessels, including regular lifting of 40–50 pounds., • Assist marine trades personnel with maintenance and repair tasks aboard U.S. Navy vessels as directed., • Support ship repair operations by acting as a trades helper for marine repair and construction-related activities., • Follow all safety procedures and use required personal protective equipment (PPE) while working in a heavy industrial shipyard environment., • Climb ladders and access various areas of the ship, including confined spaces, to support work activities., • Wear and properly use a respirator and other protective gear when required by the task or work area., • Proven experience using hand tools safely and effectively., • Proven experience using power tools in an industrial, construction, or similar environment., • Ability to perform regular heavy lifting of 40–50 pounds throughout the shift., • Willingness and physical ability to perform consistent general labor in a heavy industrial setting., • Comfort working in a ship repair or construction-type environment with changing tasks and priorities., • Ability to follow safety instructions and maintain awareness while performing fire watch duties., • Experience in ship repair, marine repair, or marine trades support is highly beneficial., • Comfort working around welding, grinding, cutting, and other metal fabrication activities., • Ability to work extended hours, including overtime, as project needs require. You join a team where your hard work directly supports the maintenance and readiness of U.S. Navy vessels. You gain extensive hands-on experience in ship repair and marine trades while working substantial overtime opportunities, often ranging between 50 and 70 hours per week. This environment offers exposure to skilled marine professionals, allowing you to build practical industrial skills and grow your career in a specialized and in-demand field. Work Environment This role is based in a heavy industrial shipyard environment aboard metal ships and around active repair operations. You work primarily on-site in all weather conditions, both indoors and outdoors, and regularly move through tight spaces, ladders, and varying levels of the vessel. Personal protective equipment (PPE) is required at all times, and you must be prepared to wear a respirator and other safety gear as needed. The standard shift runs from 6:00 a.m. to 4:30 p.m., Monday through Saturday, with frequent opportunities for extended 12-hour shifts and occasional Sunday work to meet project demands. Job Type & Location This is a Contract position based out of Seattle, WA. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Test & Evaluation (BT&E) has an exciting opportunity for a Welder - Production to join our team in Seattle, WA. The ideal candidate will support test fabrication in the Puget Sound area and must be capable of traveling to multiple sites between Seattle, Everett and Tukwila. Position Responsibilities: \n • Perform Shielded Metal Arc Welding (SMAW), Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW), and Gas Tungsten Arc Welding (GTAW) per Boeing's applicable Welding Procedure Specifications (WPS)\n, • Make adjustments during the process of the weld to compensate for variations in thickness, mismatch, gap, equipment anomalies, assembly fit-up, etc\n, • Perform brazing, sil-brazing, oxy-fuel cutting, plasma arc cutting, carbon arc gouging, flame straightening, and flame bending\n, • When a WPS is not required, select electrodes, gas cups, filler metal, weld current, arc voltage travel speed, gas flow, wire size and feed rate per the weld schedule or other furnished information\n, • Measure, layout, set and align. In preparation for or after welding, operate saws, disk grinders, drill presses, and other associated shop equipment to accomplish assigned work\n, • Work in conformance with drawings, specifications, and verbal or written instructions, trade practices, and applicable codes\n, • Must be able to work in all positions and at heights and follow all safety processes as defined\n, • Fabricate shop aids and holding devices to facilitate work assignment set up and align work in welding fixtures and block/clamp/secure parts as necessary.\n, • Maintain cleanliness of welding equipment and general weld area\n, • Request repairs when and as required to maintain welding equipment in optimum operating condition\n, • Organize and maintain welding supplies\n, • Prepare lists for requisition of welding supplies, equipment and material as required\n, • Move, lift and/or turn materials or weld structures as required, utilizing various types of shop lifting equipment\n, • Assist in the identification and documentation of best practices, process standardization and improvement activities associated with pressure piping and structural welding\n, • Perform work described in other maintenance classifications when incidental but necessary to the accomplishment of a welding assignment\n\n Basic Qualifications : \n • 3+ years' experience with welding\n, • 3+ years' experience with reading and interpreting engineering drawings\n, • 3+ years' experience with Gas Tungsten Arc Welding (GTAW)\n\n Preferred Qualification: \n • Possess an active WABO (Washington Association of Building Officials) Card\n, • 3+ years' experience with Gas Metal Arc Welding (GMAW)\n, • 3+ years' experience welding/cutting operations on steel/aluminum and various other metals all types of metals\n\n Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Shift: This role is primarily 1st shift; however, there may be additional shift requirements to support program objectives. Union: This is an hourly position governed by the International Union of Operating Engineers (IUOE) Local 302 collective bargaining agreement. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Additional Information: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $35.00/hr. to start, with the potential to earn up to $61.48/hr. as the max rate. Applications for this position will be accepted until May. 07, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description Overview Tradesmen International is immediately hiring experienced Pipe Welders for projects located in the Seattle, WA area. This is a first shift opportunity, and the pay rate is $35/hour based on experience and skill level. If you are a Pipe Welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Cut, shape, and fit steel, stainless steel, or other metal pipes according to the boiler system design, • Prepare pipe ends (beveling, threading, or flanging) for welding, • Join pipes using methods like MIG, TIG, or Stick welding, depending on the material and pressure requirements, • Ensure welds meet strict standards for strength, leak-proofing, and safety, especially since these systems handle high pressure and sometimes high temperature, • Install the welded pipes into boiler systems, ensuring proper alignment and fit, • Work with valves, fittings, and flanges to complete the plumbing for the boiler, • Replace or repair damaged pipes in existing boiler setups, • Often involves fieldwork, sometimes in tight or industrial spaces Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter Powered by JazzHR dLHX85YF3A

Job Description Puget Sound Coatings has immediate openings for maintenance mechanic technicians. PSC offers a competitive wage, a great benefit package that includes health, dental, vision plans and a 401k program with a generous match! The general duties of a maintenance technician include the following; Inspect systems and machinery for any issues in need of repair. Complete preventative maintenance at regular intervals. Report any major problems with systems or machinery to a supervisor immediately. Observes mechanical devices, maintains and repairing as needed. Lubricate and clean parts and documenting the processes. Start and test performance of equipment to troubleshoot and repair. The ideal candidate will have 1-2 years of experience and have general knowledge of gas and propane engines. Basic electrical knowledge and welding experience is a plus! Puget Sound Coatings is a leader in the Aerospace, Defense, and Energy industries. Our diversity allows us to maintain a high level of production during any downturn or difficult time. If you’re looking for a career that offers high pay and outstanding benefits, we have a job opportunity for you! Day Shift 8 a.m. - 4:30 p.m. Puget Sound Coatings is an equal opportunity employer.

Are you a highly experienced Principal Welding Engineer with a strong background in robotic welding and manufacturing automation? Would you be interested in joining Genie, a global OEM, to help advance large scale automation and modernize production across multiple sites? Do you have the ability to engage stakeholders and deliver complex automation initiatives that improve efficiency, reduce cost and maintain quality standards? If so, this Principal Welding Engineer role could be the opportunity you have been looking for. The responsibilities of the Principal Welding Engineer role are: • Lead the development and rollout of robotic welding processes across international manufacturing locations., • Own the strategy for welding technology and automation, ensuring alignment with wider business goals., • Work closely with external partners, integrators and suppliers to evaluate and implement new solutions., • Drive initiatives focused on improving productivity, reducing waste and enhancing product quality., • Support production planning by ensuring welding capacity and processes meet operational demands., • Promote standardization of welding processes across global sites including the US, China, Brazil and Mexico., • Address complex technical challenges using structured problem solving and engineering expertise. The skills and experience required for the Principal Welding Engineer role are: • Degree qualified in Engineering or a related technical field., • 5+ years of project management experience in industrial automation, manufacturing or engineering environments., • Proven exposure to robotic welding and automated production systems., • AWS Certified Welding Inspector certification., • Experience managing CAPEX projects and delivering process improvements., • Solid understanding of lean manufacturing and continuous improvement methods., • Strong communication skills with the ability to influence across functions and locations. The successful Principal Welding Engineer will join Genie, part of Terex Corporation, a globally established organization investing in advanced manufacturing capabilities. You will play a central role in driving automation across the business, supporting the transition to more efficient and standardized welding processes. This position offers the opportunity to contribute to large scale transformation projects while working closely with leadership and international teams with the opportunity to progress to Subject Matter Expert level in welding technology. Applications are being reviewed on a rolling basis.

ULG Staffing, a subsidiary of NSC, has openings for Journeyman Combo Welder / Shipfitters with a client located in Seattle WA. Candidates must have great attention to detail, excellent attendance. $26/ $160 Per Diem available for those who qualify. W Welder, Steel, Welding, Staffing, Skilled Trades

Job Description HVAC Facilities Maintenance Mechanic – Seattle WA Federal O&M Contractor seeking (2) full-time HVAC Mechanics for long term employment opportunity within the Federal Building and US Courthouse. Must have 3 yrs recent exp. in commercial or industrial electrical, mechanical, structural & architectural maintenance services in commercial facilities. Washington State 06/06A Refrigeration Certificate or Electrician License. Must possess ability to communicate well with constituents, be self-motivated, conscientious, hardworking & honest. Must be able to work independently, be self-motivated, conscientious, hardworking & honest. Must be willing to submit to a Security Background Check. This position is under a Collective Bargaining Agreement and would require membership in Local Trades Union; benefits include Pension, Health & Welfare, Paid Vacation, Sick Leave and Holidays. 23410 HEATING, VENTILATION, AND AIR-CONDITIONING MECHANIC The Heating, Ventilation, and Air-Conditioning Mechanic installs, services and repairs environmental-control systems in residences, department stores, office buildings, and other commercial establishments, utilizing knowledge of refrigeration theory, pipe-fitting and structural layout, mounts compressor and condenser units on platform or floor, using hand tools, following blueprints or engineering specifications, fabricates, assembles and installs duct-work and chassis parts, using portable metalworking tools and welding equipment, and installs evaporator unit in chassis or in air-duct system, using hand tools. This mechanic also cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools, cuts and threads pipe, using machine-threading or hand-threading equipment, joins tubing or pipes to various refrigerating units by means of sleeves, couplings or unions, and solders joints, using torch, forming complete circuit for refrigerant, installs expansion and discharge valves in circuit. This worker connects motors, compressors, temperature controls, humidity controls, and circulating ventilation fans to control panels and connects control panels to power source; installs air and water filters in completed installation, injects small amount of refrigerant into compressor to test systems and adds Freon gas to build up prescribed operating pressure. This mechanic observes pressure and vacuum gauges and adjusts controls to insure proper operation, tests joints and connections for gas leaks, using gauges or soap-and-water solution, wraps pipes in insulation batting and secures them in place with cement or wire bands, replaces defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units, may install, repair and service air conditioners, ranging from fifteen to twenty tons cooling capacity in warehouses and small factory buildings.

Title Welder About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent Pay Range: $28.00 - $36.00 Hourly DOE Job Overview:Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education: High school graduate, or GED Responsibilities: • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Title NDT Ultrasonic Inspector LII About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: NDT Ultrasonic Inspector, Level II REPORTS TO: NDT Examiner, LIII PAY RANGE: $40.00-$50.00/Hourly DOE Employees are eligible for a $5,000.00 bonus if certification in all methods is achieved within 90 days of employment start date. Summary of position: NDT inspector level II will perform VT, UT, MT and PT inspections on surface ship and submarine structure. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Required Education: High school graduate, or GED Responsibilities: • Performs physical inspections of completed welds and materials on board surface ships and submarines, • Work to approved company inspection procedures, • Assist with Reviews and writing procedures/standards for VT MT PT, and UT processes, • Provide on the job training for trainees and LI/LII inspectors, • Administer examinations to NDT personnel when designated by a LIII NDT Examiner, • Ensure work is done safely and meets quality standards, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Report any unsafe work conditions or practice to supervisor, • At a minimum qualified level II inspector for VT and UT Shear Wave IAW NAVSEA requirements in Tech pub 271. Will consider 300+ work time experience hours with UT shear wave initial training certificate as equivalent., • Experience with SMAW, GTAW and GMAW welding highly preferred, • Have knowledge of welding joint design and joint fit up requirements, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week Mental Requirements: Must be able to carry out simple to complex instructions in a safe and efficient manner. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Type of Requisition: Regular Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: None Public Trust/Other Required: None Job Family: SCA Job Qualifications: Skills: Blueprints, Electrical Installations, Shipyards Certifications: None Experience: 3 + years of related experience US Citizenship Required: Yes Job Description: Ship Fitter This is a waterfront shipboard construction and re-modernization position, working within shipyards and drydocks onboard U.S. Naval ships. The incumbent will be working in varying temperatures of high heat in the summer and cold in the winter preforming the following tasks: • Installs, maintains, repairs, overhauls, troubleshoots, modifies, constructs, and tests mechanical equipment and related devices., • Troubleshoots and corrects structural placement., • Makes recommendations for improvements or modifications to correct problems., • May provide operation and maintenance instruction to customer personnel., • Performs preventative maintenance., • Participates in special projects, as required. Required Skills & Qualifications: Technical Skills: Blueprint reading, metal fabrication, grinding, cutting (torch/plasma), welding knowledge. Tools Proficiency: Experience with heavy machinery (plate rolls, presses) and hand/power tools. Physical Ability: Strength, endurance, ability to work in confined spaces/outdoors. WHAT YOU'LL NEED TO SUCCEED: • Education: Associates of Arts/Associates of Science., • Required Experience: Associate's Degree in a related technical discipline, or the equivalent combination of education, technical certifications or training, or work experience. 1-3 years of directly related experience supporting engineering operations., • Location: On Customer Site., • US Citizenship Required. Certifications: May require TAC welding certification. GDIT IS YOUR PLACE: • 401K with company match, • Comprehensive health and wellness packages, • Internal mobility team dedicated to helping you own your career, • Professional growth opportunities including paid education and certifications, • Cutting-edge technology you can learn from, • Rest and recharge with paid vacation and holidays #hireshipyardcareersgdit The likely hourly rate for this position is between $26.35 - $35.65. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 10-25% T elecommuting Options: Onsite Work Location: USA WA Seattle Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Title Aluminum Pulse Mig Welder About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Aluminum Pulse Mig Welder REPORTS TO: Superintendent PAY RANGE: $25.00 - $35.00/hourly DOE SUMMARY The Pulse Mig Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the Pulse Mig process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Prioritize safety and adhere to quality standards during all aluminum welding operations., • Configure welding machines according to job requirements or Welding Procedure Specifications for pulse mig aluminum welding., • Utilize personal basic tools and equipment for welding tasks if not provided by the workplace., • Perform aluminum welding based on the required Pulse Mig process and parameters., • Strictly follow welding procedure specifications for Pulse Mig aluminum welding., • Prepare and set up welding cells for serial production runs of aluminum components., • Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities., • Adhere to all company policies and rules., • Demonstrate keen attention to detail and focus on assigned tasks., • Comply with safety regulations and maintain high-quality standards., • Collaborate with team members to enhance productivity and efficiency., • Assist in preparing aluminum products for shipment., • Report any hazardous work conditions or practices to the supervisor., • Ability to understand and follow both verbal and written instructions., • A willingness to learn and display a dependable work ethic., • Knowledge of welding equipment, including proper setup and usage for aluminum pulse mig welding., • Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals., • Familiarity with the metric system., • Capable of standing continuously for extended periods., • High school graduate or GED, • 2 years of relevant experience in aluminum welding., • May be made to enable qualified individuals with disabilities to perform essential job functions. Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Description Who We Are Vigor Marine Group is an established, innovative, integrated partner with a national footprint in marine maintenance and modernization, marine fabrication, and marine services. With four shipyards, six dry docks, and more than 20,000 feet of pier space on or near U.S. Naval bases and at historic shipyards, our 2,500 dedicated employees across four states - from the Pacific Northwest to San Diego to Norfolk - personify the values of our company. Vigor Marine Group takes pride in being the employer of choice for our employees, who in turn take great pride in their contributions to the communities where they live and work, and to their nation - through their living wage jobs supporting their local economies, and through the world-class maritime and industrial services they provide to further our defense readiness and national security. For more information, visit vigor.net. HOURLY RATE: $42.00 POSITION SUMMARY: This position is responsible for developing, tracking, administering, and scheduling tests and inspections and writing of required reports. The incumbent inspects in-process and final craft work for proper approvals and documents results as required in test and inspection plans developed by the Quality Department. ESSENTIAL DUTIES AND RESPONSIBILITIES: (This list is not intended to detail all aspects of the assigned work but is representative of the job's overall responsibilities) \n • Develops tests and inspection plans for areas of responsibility in accordance with internal quality requirements and contract specifications, including but not limited to NAVSEA Standard Items, U.S. Coast Guard Regulations, Classification Societies, and other applicable engineering standards.\n, • Serves as liaison between supervision, crafts and regulatory agencies, as required.\n, • Ensures that all preliminary inspection requirements have been satisfied and are accomplished in accordance with contract specifications prior to final inspection call outs to regulatory agencies.\n, • Monitor craft work to ensure proper workmanship is in accordance with regulatory agencies, classification society, NAVSEA Standard Items, Vigor Industrial and acceptable shipbuilding practices as appropriate.\n, • Ensures that all instrumentation and gauges used in testing procedures are properly calibrated in accordance with regulatory agencies and company calibration guidelines.\n, • Informs Project Management, Quality Director, Operations Managers/Directors of all deficiencies requiring corrective action as outlined in the Quality Management System (QMS) to include Internal Deficiency Reports (IDR), Quality Deficiency Reports (QDR), and Non-conforming Services (NCS).\n, • Establishes and maintains positive, cooperative working relationships with crafts, owner representatives, and regulatory agency officials.\n, • Assists Managers, the Quality Director and supervisors in developing test memos and Process Control Procedures to Ensure that final forms and testing practices are in proper format and work scope formed.\n, • Develops and assists in administering training to craft supervisors and test directors for applicable test and inspection requirements.\n, • Ensures materials purchased and installed meet requirements of contract specifications by performing random checks.\n, • Ensures all subcontractors' qualifications meet requirements of regulatory agencies and contract specifications. Also ensures all subcontractor required quality assurance submittals are correct and fulfill requirements of the specifications.\n, • Reviews and qualifies all Quality Assurance requirements imposed by outside agencies. Verifies that requirements do not impose higher levels of effort to accomplish then those required by contract specifications.\n, • Coordinates with management and craft supervisors to ensure all personnel meet the minimum skill and ability along and possess the required certifications to accomplish the task assigned.\n\n JOB SCOPE: \n • Operates within the guidelines provided by applicable referenced Codes with regard to the respective discipline to which they are inspecting (i.e.: welding, electrical, coatings, etc.).\n, • Position requires ability to assess and administer acceptance requirements based on pre-determined criteria.\n\n SUPERVISORY RESPONSIBILITY: Does not have any direct reports, however, may be responsible for supervising workers engaged in conducting tests and inspections in accordance with procedures. INTERPERSONAL CONTACTS: \n • Inspectors are required to coordinate with Project Managers, craft supervisors, and craft personnel, as well as Customer representatives and Regulatory (ABS/ USCG) inspectors.\n, • For Navy programs, liaise with NAVSEA Ship Building Specialist (SBS)\n\n KNOWLEDGE SKILLS AND ABILITIES: \n • Knowledge of ship systems particularly, how they interact and construction/repair sequencing.\n, • Knowledge of principles and practice of marine or class society surveying, vessel operations, or U.S. Coast Guard inspections. Understanding of engineering principles applicable to ship repair; crafts required in ship repair.\n, • Knowledge of AWS D1.1 and ASME Sect IX welding codes.\n, • Knowledge and working experience with NAVSEA Standard Items and navy vessels.\n, • Experience with Navy 5xxx inspection criteria for aluminum structure.\n, • Ability to read and interpret blueprints, construction specifications, complex regulatory documents and contracts.\n, • Skilled at conducting inspections and guide others in appropriate work process techniques, while mentoring others by modeling respectful behaviors, including interpreting and applying complex contracts in the inspection of work.\n, • Ability to apply a systems approach to work planning and execution.\n, • Effectively communicate orally and in writing with diverse groups such as customers, vendors, labor representatives and officials at all levels.\n, • Handle multiple priorities with independence and good judgment.\n, • Effectively work in a complex multi-craft, union work environment; influence others to meet quality standard and skilled at conflict resolution.\n, • Ability to use PC, including I-pads, and software applications such as MS Office and Database programs.\n, • Ability to provide strong customer service and demonstrate adherence to customer requirements and satisfaction.\n, • Able to identify approaches to maximize adherence to quality processes on an on-going basis.\n, • Skill in setting high expectations and inspiring employees to meet the standards including use of computer applications such as word processing, spreadsheets and databases.\n\n EDUCATION AND/OR EXPERIENCE: \n • Current CWI or NDT Certifications (VT/UT/MT/PT) Level 2.\n, • 1 - 5 years of experience in marine or industrial setting either in a shipyard, heavy construction, or industrial manufacturing environment.\n\n CERTIFICATES, LICENSES AND REGISTRATIONS: CWI - AWS NDT Inspection Training - Welding inspector (L2 NDT certificates minimum for Structural Inspector in any of VT, MT, PT, UT disciplines) PHYSICAL DEMANDS: Work is conducted in a dynamic, fast-paced shipyard with moderate to loud noise levels from production activity in the shipyard. Will be required to be in production areas in yard and onboard ships. Must be able to walk to and from job sites. Must be able to frequently climb inclined stairways and vertical ladders. Must be able to enter confined areas and tanks. May be required to work more than 8-hour shifts and weekend work. Must be able to frequently bend, squat, crawl and twist. May be required to lift up to 50 pounds. Local travel and out-of-town travel (including air travel) up to 5% of the time with notice. WORK ENVIRONMENT: While in production areas will be exposed to all weather conditions, noise, dusts and odors. This role is with a federally contracted employer and is subject to regulations that restrict employment to US Persons only (i.e. US Citizens, lawful permanent residents, legally recognized asylees and refugees, and persons protected under INA). Successful job candidates will be asked to provide documentation of their US Persons status. Vigor Industrial LLC and its wholly owned subsidiaries are drug, smoke and vape-free workplaces. Prospective employees must pass a drug and alcohol test and background check as pre-employment screening. Vigor Values Vigor expects all employees to enhance the atmosphere in which they work by living the Vigor Values every day. Truth: We seek the truth, and we speak the truthResponsibility: We act on what we know is rightEvolution: We seek mastery, and adapt to a changing worldLove: We care about the people we work with, and the world we live in At Vigor we offer a generous benefits package that includes: MedicalRXDentalVisionLifeAD&DLTDSTDEAPDiscretionary bonusTuition ReimbursementFSA (Medical, Childcare, Transportation)10 paid holidaysPTO401(k) Vigor and its wholly owned subsidiaries are committed to inclusion and diversity by providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, protected veterans, age, genetics, the presence of a physical or mental condition or disability that can be reasonably accommodated, or any other protected class under relevant laws in the locations we operate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and can be requested with Vigor's Human Resources Department. In addition to federal law requirements, Vigor complies with applicable state and local laws governing nondiscrimination and non-retaliation in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, benefits, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Join Amrize as a Maintenance Technician and help construct whats next. If you're ready to put your skills to work on projects that matter - and build a career with a company that's building North America - we want to hear from you! ABOUT THE ROLE The Maintenance Technician is responsible for the safe inspection, repair, installation, and maintenance of all plant equipment and systems to ensure optimal plant performance. This role supports reliable operations by performing both preventive and corrective maintenance on mechanical, hydraulic, and pneumatic systems while maintaining a strong commitment to safety and teamwork. WHAT YOU'LL ACCOMPLISH \n\n • Perform preventive and corrective maintenance on all plant equipment, including conveyors, pumps, crushers, dryers, separators, gearboxes, and rotary equipment.\n, • Inspect, troubleshoot, and repair mechanical systems to minimize downtime and improve reliability.\n, • Fabricate, weld, cut, and assemble mechanical components or replacement parts as needed.\n, • nstall, align, and move mechanical equipment according to engineering specifications and drawings.\n, • Safely operate mobile equipment such as forklifts, man lifts, and service trucks as required.\n, • Support and comply with all Amrize Safety Policies, including Lockout/Tagout (LOTO), Working at Heights (WAH), and confined space procedures.\n, • Document maintenance activities accurately and communicate findings to plant management.\n, • Collaborate with production, electrical, and operations teams to schedule and complete work efficiently.\n, • Participate in safety meetings, training, and continuous improvement initiatives.\n, • Assist with plant clean-up and other support activities as needed to maintain safe, efficient operations.\n, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors.\n\n WHAT WE'RE LOOKING FOR Education: High school Diploma or equivalent. Required Work Experience: 3+ years of experience in industrial maintenance or millwright work (cement, aggregates, mining, or heavy manufacturing environment preferred). Mobile equipment operation experience preferred (forklift, man lift, loader, etc.). Additional Requirements: \n\n • Occasional overtime, weekend, or call-in work may be required.\n, • Working knowledge of mechanical, hydraulic, pneumatic, and basic electrical systems.\n, • Skilled in welding, cutting, grinding, drilling, and mechanical assembly.\n, • Ability to read and interpret mechanical drawings, schematics, and equipment manuals.\n, • Demonstrated ability to plan and prioritize maintenance activities independently or within a team.\n, • Ability to work safely in varied environmental conditions and around heavy equipment.\n, • Demonstrate strong skills in problem-solving, decision making and multi-tasking\n, • Strong mechanical aptitude with diagnostic and problem-solving skills.\n, • Works collaboratively and respectfully with peers, management, and vendors.\n, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.\n\n WHAT WE OFFER \n\n • Pay Rate $41.55 - $46.55/Hourly \n, • Comprehensive Healthcare Plan benefits for you and your dependents as outlined in the CBA\n, • A Retirement Plan designed to support you through various stages of your career and life, as outlined in the CBA\n, • Healthy Living support through an EAP, offering confidential assistance for work, health, or life challenges for you and your household\n, • Perks & discounts on a variety of products and services\n, • An inclusive and welcoming environment where everyone can be themselves\n, • A collaborative work culture in a supportive and team-oriented work environment\n, • Company-provided personal protective equipment ensuring your safety and comfort on the job\n\n As part of our dedicated focus on the health and safety of all employees, a pre-employment medical, including drug and alcohol testing and a criminal record check, will be required. Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. \n We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Title Shipfitter About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Shipfitter Reports to: Structural Superintendent Pay Range: $35.00 - $41.00 Hourly DOE Responsible for the use of various tools and equipment in the fabrication, assembly, and erection of steel structure. This position includes drawing reading, steel structure removal shipboard and reinstall. The position requires a working knowledge of technical to include 1689 and 1688. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Ensure work is done safely and meets quality standards., • Must have own basic skill related tools and equipment if not supplied by the workplace., • Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames., • Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools., • Locate and mark reference lines, such as center, buttock, and frame lines., • Position parts in hull of ship., • Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding., • Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips., • May prepare molds and templates for fabrication of nonstandard parts., • May tack weld clips and brackets in place prior to permanent welding., • May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines., • Ensure work is done safely and meets quality standards., • Assemble items as instructed by floor supervisor., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and policies., • Provide a great level of attention to detail and focus on the given task., • Work with team members to maximize productivity and efficiency., • Prepare product for shipment., • Report any unsafe work conditions or practice to supervisor. None KNOWLEDGE, SKILLS, AND ABILITIES • Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals., • Familiarity with the metric system, • Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents., • Ability to stand continuously for long periods of time., • Ability to identify and measure material., • Ability to follow instructions given both verbally and in written form., • Willingness to learn and work to the best of his/her abilities as well as dependable work ethic., • Knowledge of machines and tools, including their designs and uses., • High school graduate, or GED preferred., • Six months to one-year related experience and/or training, • Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime., • Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions., • Work over extended periods of time in tightly configured confined spaces., • May be made to enable qualified individuals with disabilities to perform essential job functions. Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Test & Evaluation (BT&E) has an exciting opportunity for a Welder - Production to join our team in Seattle, WA. The ideal candidate will support test fabrication in the Puget Sound area and must be capable of traveling to multiple sites between Seattle, Everett and Tukwila. Position Responsibilities: \n • Perform Shielded Metal Arc Welding (SMAW), Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW), and Gas Tungsten Arc Welding (GTAW) per Boeing's applicable Welding Procedure Specifications (WPS)\n, • Make adjustments during the process of the weld to compensate for variations in thickness, mismatch, gap, equipment anomalies, assembly fit-up, etc\n, • Perform brazing, sil-brazing, oxy-fuel cutting, plasma arc cutting, carbon arc gouging, flame straightening, and flame bending\n, • When a WPS is not required, select electrodes, gas cups, filler metal, weld current, arc voltage travel speed, gas flow, wire size and feed rate per the weld schedule or other furnished information\n, • Measure, layout, set and align. In preparation for or after welding, operate saws, disk grinders, drill presses, and other associated shop equipment to accomplish assigned work\n, • Work in conformance with drawings, specifications, and verbal or written instructions, trade practices, and applicable codes\n, • Must be able to work in all positions and at heights and follow all safety processes as defined\n, • Fabricate shop aids and holding devices to facilitate work assignment set up and align work in welding fixtures and block/clamp/secure parts as necessary.\n, • Maintain cleanliness of welding equipment and general weld area\n, • Request repairs when and as required to maintain welding equipment in optimum operating condition\n, • Organize and maintain welding supplies\n, • Prepare lists for requisition of welding supplies, equipment and material as required\n, • Move, lift and/or turn materials or weld structures as required, utilizing various types of shop lifting equipment\n, • Assist in the identification and documentation of best practices, process standardization and improvement activities associated with pressure piping and structural welding\n, • Perform work described in other maintenance classifications when incidental but necessary to the accomplishment of a welding assignment\n\n Basic Qualifications : \n • 3+ years' experience with welding\n, • 3+ years' experience with reading and interpreting engineering drawings\n, • 3+ years' experience with Gas Tungsten Arc Welding (GTAW)\n\n Preferred Qualification: \n • Possess an active WABO (Washington Association of Building Officials) Card\n, • 3+ years' experience with Gas Metal Arc Welding (GMAW)\n, • 3+ years' experience welding/cutting operations on steel/aluminum and various other metals all types of metals\n\n Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Shift: This role is primarily 1st shift; however, there may be additional shift requirements to support program objectives. Union: This is an hourly position governed by the International Union of Operating Engineers (IUOE) Local 302 collective bargaining agreement. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Additional Information: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $35.00/hr. to start, with the potential to earn up to $61.48/hr. as the max rate. Applications for this position will be accepted until May. 07, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionSteel Fabrication company in South Seattle seeks a hardworking, dependable lead fitter/fabricator. This is not an entry level position. Applicant must have a minimum of 3 years’ experience as a fitter, not a welder. Our company works exclusively in hot-rolled steel, specializing in structural work. Our scope of work includes structural beams and columns, canopies, stairs, embeds, and handrail. Applicant must possess the following:· WABO D1.1 FCAW certification.· WABO D1.1 GMAW certification (preferable but not necessary).· Ability to read and comprehend steel fabrication drawings.· Ability to perform layout on a large scale: fitting steel beams and columns with great accuracy· Ability to perform multi-pass, structural welds.· Understanding of Pre-Qualified welding procedures.· Understand and comply with supervisors’ direction and company safety policies.· Work reasonably and safely with other welders/fitters in the company.· Proficient with ironworking tools and equipment: oxy-fuel torches, plasma cutter, grinders, bandsaws, ironworker, notchers, presses, drills, taps, pneumatic tools, overhead cranes, rigging, forklifts, etc.…· Be available from 6am-2:30pm, 5 days a week.· Have reliable transportation to the Seattle Area Benefits:Competitive hourly wageMedical and dental benefitsPaid holidayPTO (accruing each week)401K participation This is a full-time day shift positionM-F 6am-2:30pmOvertime at time and a half pay.Compensation is dependent on experience, with a review after a 90-day period.Must be US work eligible and drug free.To apply, please respond to this ad, along with a resume or list of recent work history E04JI800qsf3401ij3y

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Shipfitter Reports to: Structural Superintendent Pay Range: $35.00 - $41.00 Hourly DOE Responsible for the use of various tools and equipment in the fabrication, assembly, and erection of steel structure. This position includes drawing reading, steel structure removal shipboard and reinstall. The position requires a working knowledge of technical to include 1689 and 1688. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Ensure work is done safely and meets quality standards., • Must have own basic skill related tools and equipment if not supplied by the workplace., • Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames., • Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools., • Locate and mark reference lines, such as center, buttock, and frame lines., • Position parts in hull of ship., • Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding., • Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips., • May prepare molds and templates for fabrication of nonstandard parts., • May tack weld clips and brackets in place prior to permanent welding., • May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines., • Ensure work is done safely and meets quality standards., • Assemble items as instructed by floor supervisor., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and policies., • Provide a great level of attention to detail and focus on the given task., • Work with team members to maximize productivity and efficiency., • Prepare product for shipment., • Report any unsafe work conditions or practice to supervisor. None KNOWLEDGE, SKILLS, AND ABILITIES • Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals., • Familiarity with the metric system, • Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents., • Ability to stand continuously for long periods of time., • Ability to identify and measure material., • Ability to follow instructions given both verbally and in written form., • Willingness to learn and work to the best of his/her abilities as well as dependable work ethic., • Knowledge of machines and tools, including their designs and uses., • High school graduate, or GED preferred., • Six months to one-year related experience and/or training, • Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime., • Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions., • Work over extended periods of time in tightly configured confined spaces., • May be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Type of Requisition: Regular Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: SCA Job Qualifications: Skills: Nondestructive Testing (NDT), Quality Assurance (QA), Visual Testing Certifications: None Experience: 3 + years of related experience US Citizenship Required: Yes Job Description: QUALITY ASSURANCE REPRESENTATIVE III / NDT II Trained and Qualified in Nondestructive Testing Level II (Visual, Liquid Penetrant and Magnetic Particle Inspection) with 3+ years' direct experience in U.S. Navy shipboard/Submarine NDT Inspections. Develops QA Workbooks with Test and Inspection Plans. Computer skills in Work and Excel required. Performs a variety of quality control tests/inspections on products, materials, components, parts, etc. at various stages of the production process to ensure compliance with quality and reliability standards. Records and analyzes data and writes summaries and reports to validate or show deviations from existing standards. Works closely with management to ensure adherence to ISO standards and NAVSEA Standard Items. Recommends modifications to existing, or suggests new, standards, methods, and procedures. Maintains appropriate documentation related to quality assurance tests and inspections. Provides quality training. May provide guidance and work leadership to less-experienced staff members. Guides and directs employees in quality improvement efforts. Participates in special projects as required. Electrical Cableway and Connector knowledge a plus. May require professional, technical, or company certification(s), depending on job assignment. Some travel may be required depending on task. Knowledge in welding and Welder Qualification is a plus. 25% or more travel may be required Requires HS diploma/GED; 3+ years of direct experience Requires Non Destructive Testing Level II certification for Visual Testing, Liquid Penetrant Testing, and Magnetic Particle Testing Must be a US citizen Active Secret clearance required. GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #hireshipyardcareersgdit The likely hourly rate for this position is between $32.30 - $43.70. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 25-50% T elecommuting Options: Onsite Work Location: USA WA Seattle Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Description At IPS, we're all about exceptional service and exceptional people. We're looking for a passionate In-Shop Technician who loves hands-on work, takes pride in their craft, and wants to have a meaningful impact. As an In-Shop Technician, every day will be different. You'll get to apply your knowledge and skills to solve complex problems and help critical industries keep their equipment running. As a company, we prioritize safety in everything we do and offer opportunities for growth, job longevity, and continuous improvement. If you're looking for a role that values your skills and dedication, IPS is where you'll thrive. Responsibilities & Expectations: We are looking for a skilled Manual Milling and Lathe Machinist to join our team. As a team member for IPS, you will apply innovative, analytical, and problem-solving skills, have strong attention to detail, and customer focus to repair industrial AC/DC electric motors, generators, gearboxes and related equipment while supporting our continuous improvement process culture. Responsibilities may include: \n • Operate conventional manual machining tools including engine lathes, horizontal lathes, milling machines, grinders, drilling machines, and related equipment\n, • Safely use overhead, gantry cranes, lift trucks, and associated lift rigging\n, • Perform mechanical measurements using portable mechanical instruments such as dial indicators, micrometers, and portable vibration measurement equipment. Including measurement of shaft run-out.\n, • Machine and fabricate parts using engine lathes, grinders, and drill presses\n, • Draw accurate prints for parts needing to be fabricated \n, • Diagnose incoming units, disassemble, repair, assemble, and prepare items for shipment.\n, • Perform mechanical rebuilds on rotating apparatus repairs like electric motors, pumps, and fans.\n, • Measure and record data using calipers, dial indicators, micrometers, and vibration meters.\n, • Use multi-meters, meggers, Baker instruments, and measure winding resistance, RTD and heater resistances, and mechanical fits and clearances.\n, • Adhere to our shop safety policies\n, • 3 or more years of experience as a machinist for electric motor repair preferred \n, • Ability to read micrometer measuring equipment\n, • Motor shop, machine shop, tool & die stamping, or oil field experience preferred \n, • Ability to operate manual lathes of various sizes and dimensions\n, • Ability to operate metalizing equipment\n, • Ability to work with tolerances of +/- .001 \n, • Ability to perform basic math functions\n, • Ability to understand, perform, and retain various job-related training, operational, and safety procedures\n, • Welding and fabrication experience preferred\n, • 1-5 years of AC/DC motor experience preferred.\n, • Self-starter and highly motivated person.\n, • Ability to stand, stoop, kneel, and bend for prolonged periods of time.\n • Lead with integrity and prioritize safety. You demonstrate high standards and commit to a safe, ethical workplace., • Value teamwork and accountability. You work well with others, take responsibility, serve others, and deliver on your commitments., • Focus on the customer. You are dedicated to providing an unmatched customer experience and exceeding expectations., • Have an entrepreneurial spirit. You're proactive, innovative, and thrive in a fast-paced environment., • Communicate effectively and with purpose. You keep everyone informed with clear, concise communication., • Stay curious and love to learn. You continuously seek new knowledge and grow personally and professionally. Who We Are: At Integrated Power Services (IPS), we're committed to empowering you to make a meaningful impact. As the industry's leading and fastest-growing service provider, IPS offers single-source electromechanical and power management solutions to enhance the reliability of critical infrastructure across North America and the United Kingdom. We serve over 30,000 essential customer locations, from renewable energy pioneers to hospitals, manufacturers, and municipalities, helping them avoid costly downtime and ensure mission-critical operations. When you join IPS, you're joining a team that's revolutionizing equipment and process reliability across diverse sectors, from power generation to petrochemicals, and beyond. You'll learn from industry experts, grow alongside a talented workforce, and be part of a company that is built on the Shared Values of Safety, Integrity, Teamwork, Accountability, Customer Focus, and Entrepreneurial Spirit. Pay Rate Details: $28.50 - $37.50 per hour Benefits: \n • Paid Time Off (PTO)\n, • 401k Employer Match\n, • Bonus Incentives \n, • Tuition Reimbursement Program \n, • Medical, Dental and Vision plans\n, • Employee Assistance Program (EAP) \n, • And more!\n\n IPS is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status. Any offer of employment is contingent upon the successful completion of a background and driving record investigation. As a federal contractor, our company is committed to maintaining a safe and drug-free workplace. Candidates for this position are required to complete a pre-employment drug screen successfully. The drug screening process will include testing for substances that may impair one's ability to perform the job safely and effectively. #LI-JR1 #LI-C

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Aluminum TIG Welder REPORTS TO: Production Superintendent PAY RANGE: $25.00 - $35.00/hourly DOE SUMMARY The Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the GTAW (Gas Tungsten Arc Welding) process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Prioritize safety and adhere to quality standards during all aluminum welding operations., • Configure welding machines according to job requirements or Welding Procedure Specifications for GTAW aluminum welding., • Utilize personal basic tools and equipment for welding tasks if not provided by the workplace., • Perform aluminum welding based on the required GTAW process and parameters., • Strictly follow welding procedure specifications for GTAW aluminum welding., • Prepare and set up welding cells for serial production runs of aluminum components., • Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities., • Adhere to all company policies and rules., • Demonstrate keen attention to detail and focus on assigned tasks., • Comply with safety regulations and maintain high-quality standards., • Collaborate with team members to enhance productivity and efficiency., • Assist in preparing aluminum products for shipment., • Report any hazardous work conditions or practices to the supervisor., • Ability to understand and follow both verbal and written instructions., • A willingness to learn and display a dependable work ethic., • Knowledge of welding equipment, including proper setup and usage for aluminum GTAW welding., • Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals., • Familiarity with the metric system., • Capable of standing continuously for extended periods., • High school graduate or GED, • Six months to one-year of relevant experience and/or training in aluminum welding., • May be made to enable qualified individuals with disabilities to perform essential job functions.\n Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

JOB TITLE: Aluminum Pulse Mig Welder. The Pulse Mig Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the Pulse Mig process in all positions.

As part of a hardworking team of welders, technicians and engineers, you will support robotic welding of the New Glenn rocket.