Offres welding à Lubbock, TexasCréer des alertes d'emploi

Job Description Job Title: Ironworker – Steel Erection / Pre-Engineered Metal Buildings Location: Abilene, Texas Pay Rate: $25 per hour Per Diem: $115 per day Job Type: Full-Time Hours: 55–60 hours per week Job Overview: We are seeking experienced Ironworkers to join our team in Abilene, TX. This role focuses on steel erection and pre-engineered metal building installation. Candidates will work with structural steel, operate industrial machinery, and ensure projects are completed safely, efficiently, and to high-quality standards. Strong mechanical and technical skills are required, as well as the ability to read and interpret blueprints and layouts. Responsibilities: • Read specifications or blueprints to determine locations, quantities, or sizes of materials required, • Fabricate metal parts, such as steel frames, columns, beams, or girders, according to blueprints or supervisor instructions, • Unload and position prefabricated steel units for hoisting as needed, • Hoist steel beams, girders, or columns into place using cranes or by signaling hoisting equipment operators, • Verify vertical and horizontal alignment of structural steel members using plumb bobs, laser equipment, transits, or levels, • Cut, bend, or weld steel pieces using metal shears, torches, or welding equipment, • Force structural steel members into final positions using turnbuckles, crowbars, jacks, or hand tools, • Pull, push, or pry structural steel members into approximate positions for bolting into place, • Bolt aligned structural steel members for permanent riveting, bolting, or welding, • Assemble hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy materials or equipment, • Take personal responsibility for fostering a safe workplace by following safety policies and procedures, • Train or supervise others in job duties as needed, • High school diploma or GED preferred, • Successful completion of an Ironworker apprenticeship preferred, • 3+ years of Journeyman-level ironworking experience required, • Industrial machine licenses (e.g., forklift) preferred, • Must have experience with:, • I-Beams, • Operating aerial lifts, • Pre-Fabricated metal building erection, • Ironwork construction, • Knowledge of machines and tools, including their design, uses, repair, and maintenance, • Knowledge of materials, methods, and tools used in construction or repair of buildings or industrial structures, • Knowledge of the practical application of engineering science and technology, • Ability to visualize layouts by reading plans and prints, • Ability to comprehend and troubleshoot mechanical systems, • Must have OSHA 10 Construction Industry certification (current within last 5 years), • Must be able to pass a work physical and pre-employment drug screening Job Summary: This role is for Journeyman-level Ironworkers experienced in steel erection and pre-engineered metal building installation. Candidates must possess strong mechanical knowledge, hands-on experience with I-beams and aerial lifts, and the ability to operate industrial machinery safely. This position offers $25/hour, $115/day per diem, and a 55–60 hour workweek. Safety is a top priority, and candidates must hold OSHA 10 certification and pass both a work physical and drug screening.

Job Description POSITION SUMMARY Welder 1 is responsible for performing basic welding tasks under direct supervision. This role is ideal for those with foundational welding knowledge and a willingness to learn advanced techniques. The Welder 1 will assist in welding projects, focusing on quality and safety, while learning to interpret welding blueprints and other technical documentation. ROLE AND RESPONSIBILITIES • Perform basic MIG and TIG welding on assigned materials (e.g., steel, aluminum, and ductile iron)., • Assist senior welders with preparation and fitting workpieces., • Follow established procedures and specifications to produce quality welds., • Maintain a clean and organized workspace., • Adhere to all safety protocols to ensure a safe working environment., • Perform other duties as assigned by the Plant Manager or supervisor. QUALIFICATIONS AND EDUCATION REQUIREMENTS • High school diploma or GED required., • Certification in basic welding techniques or equivalent on-the-job training., • Ability to follow written or verbal instructions., • Strong willingness to learn and improve. PREFERRED SKILLS • Basic understanding of MIG/TIG welding., • Ability to work in a team environment., • Basic problem-solving and time-management skills., • Willingness to work in shifts, weekends, or overtime when needed Physical • Ability to stand, walk, and bend for extended periods., • Ability to lift heavy materials (up to 50 lbs)., • Comfortable working in a loud, industrial environment with protective gear. Custom Pipe and Fabrication is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, or veteran status. In addition to federal law requirements, Custom Pipe and Fabrication complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Custom Pipe and Fabrication expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Job Description Overview: Pay Rate: $15.00/hour Schedule: 45–65 hours per week (overtime required) Location: Lubbock, TX Position Overview: We are seeking a dependable and hardworking Flux Core Welder to join our team. This position involves heavy welding in a fast-paced production environment and requires the ability to work extended hours, including overtime. Candidates must be comfortable working 45–65 hours per week as production demands fluctuate. Responsibilities: • Perform flux core (FCAW) welding on structural steel and/or fabricated components, • Read and interpret blueprints and welding symbols, • Set up and operate welding equipment safely and efficiently, • Inspect welds to ensure quality and compliance with specifications, • Grind, clean, and prepare materials before and after welding, • Maintain a clean and organized work area, • Previous flux core welding experience required, • Ability to pass a weld test, • Ability to read a tape measure and blueprints, • Strong attention to detail and quality, • Ability to lift up to 50 lbs, • Willingness to work 45–65 hours per weekWork Environment:, • Manufacturing/industrial setting, • Exposure to heat, sparks, fumes, and loud noise, • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team Company DescriptionDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like: Weekly Pay $5 Prescription Drugs $5 Doctor's Visit Copays Free Teledoctor Service Free Counseling Services Life Insurance Included Vision Insurance Included Dental Insurance Included Vacation and Holiday Pay Scholarship Opportunities NEW! 401(k) Retirement Plan Free Legal Services Our unbeatable employee discount program If this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you! –Your Ōnin teamDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like:\r\n\r\nWeekly Pay\r\n$5 Prescription Drugs\r\n$5 Doctor's Visit Copays\r\nFree Teledoctor Service\r\nFree Counseling Services\r\nLife Insurance Included\r\nVision Insurance Included\r\nDental Insurance Included\r\nVacation and Holiday Pay\r\nScholarship Opportunities\r\nNEW! 401(k) Retirement Plan\r\nFree Legal Services\r\nOur unbeatable employee discount program\r\nIf this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you!\r\n\r\n–Your Ōnin team

Job Description Now Hiring: Sign Fabricator-Welder | SkyRite Sign Co. Based in Lubbock, TX | Full-Time | Skilled Welder Wanted If you know your way around a MIG welder, can read a tape measure without blinking, and take pride in your welds...we've got a spot for you. At SkyRite, we build custom signs that become part of our customers' identity. But those signs don't stand tall or last long without strong welds behind them. That's where you come in. As a Welder, your job is to lay down clean, solid, dependable welds that hold up to wind, weight, and time. If you grew up on a farm or in a shop where welding was just part of life...and you learned the right way by doing it over and over...this job might feel a whole lot like home. We're looking for that kind of steady hand and common-sense work ethic. This is a full-time, hourly position in an indoor shop, with the opportunity for overtime. And thanks to recent changes in the law, overtime pay is now tax-free under what's being called the Big Beautiful Bill. That means your hard work after 40 hours may go even further than before. Your work will literally become part of the skyline in cities and towns across Texas. What You'll Actually Do • MIG weld steel (and other metal) sign structures, • Read and interpret shop drawings, blueprints, and cut lists, • Measure, prep, and align parts for accurate welding, • Perform quality welds with consistency, safety, and speed, • Keep your tools and area clean, organized, and safe Who Will Love This Job • Experienced MIG welders looking for steady, indoor work, • People who take pride in the strength and look of their welds, • Welders who care about doing it right, not just fast, • Hard workers who want to build something that lasts What You'll Get in Return • Competitive pay that is based on your individual level of experience, • Clean indoor shop with solid equipment, • Medical, dental, and vision insurance with multiple plan options, • Company-paid life insurance ($25,000), • Company-paid long-term disability coverage, • Optional FSA, HSA (if eligible), short-term disability, critical care, supplemental life insurance, and even pet insurance available, • Two weeks of paid time off per year (accrues and increases with tenure), • Eight paid holidays per year Requirements • At least 2 years of MIG welding experience, • Ability to read a tape measure, blueprints, and weld symbols •, • Strong attention to detail and safety •, • Positive attitude and willingness to follow direction, • Must have a valid driver's license and meet insurability requirements Apply today and start your journey in the sign industry with SkyRite! SkyRite is an equal opportunity employer. Keywords: Sign Fabricator, Sheetmetal, Welding, Fabrication, painting. No License Needed.

Job Description Overview: This is an amazing opportunity for intermediate candidates to gain hands-on experience in a steel fab shop with competitive pay and bonus opportunities. Plus, radically affordable health insurance after 30 days. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team Company DescriptionDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like: Weekly Pay $5 Prescription Drugs $5 Doctor's Visit Copays Free Teledoctor Service Free Counseling Services Life Insurance Included Vision Insurance Included Dental Insurance Included Vacation and Holiday Pay Scholarship Opportunities NEW! 401(k) Retirement Plan Free Legal Services Our unbeatable employee discount program If this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you! –Your Ōnin teamDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like:\r\n\r\nWeekly Pay\r\n$5 Prescription Drugs\r\n$5 Doctor's Visit Copays\r\nFree Teledoctor Service\r\nFree Counseling Services\r\nLife Insurance Included\r\nVision Insurance Included\r\nDental Insurance Included\r\nVacation and Holiday Pay\r\nScholarship Opportunities\r\nNEW! 401(k) Retirement Plan\r\nFree Legal Services\r\nOur unbeatable employee discount program\r\nIf this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you!\r\n\r\n–Your Ōnin team

Job Description Buyer / Planner – Fabrication Supply Chain Location: Wolfforth, Texas Company: Patriot Products Group Position Summary Patriot Products Group is seeking a Buyer / Planner – Fabrication Supply Chain to manage procurement and planning of fabricated weldments supporting our pump package manufacturing operations in Texas. This role requires strong capability in ERP/MRP systems (Odoo) for planning, scheduling, tracking work-in-process, and ensuring accurate, timely material visibility across the fabrication supply chain. The Buyer / Planner will coordinate a multi-stage fabrication supply chain involving laser cutting, forming, welding, powder coating, and final delivery into Patriot's production environment. A key component of this role is maintaining a rolling 120‑day production and procurement plan, while serving as the Fabrication Supply Chain Control Tower, ensuring system accuracy and real-time data visibility through the ERP (Odoo) platform. Key Responsibilities Fabrication Supply Chain Control Tower Serve as the central coordination point for the Texas fabrication supply chain, leveraging the Odoo ERP system to provide real-time visibility into demand, supply, and work‑in‑process across the entire value chain, and finishing vendors. • Maintain a Fabrication Control Tower dashboard within Odoo or connected reporting tools., • Ensure accurate ERP tracking of:, • 120‑day weldment demand, • Work‑in‑process at each supplier, • Powder coating status, • Finished weldments staged for delivery, • Identify bottlenecks, capacity constraints, and shortages through system data and coordinate mitigation actions., • Provide leadership reporting based on ERP-driven insights. Rolling 120‑Day Supply Plan • Use Odoo/MRP to translate Patriot's production forecast into forward‑looking supply requirements., • Maintain and continuously update the 120‑day plan within the ERP environment., • Ensure system accuracy for forecasts, production schedules, and supplier commitments. Daily Supply Chain Coordination • Use Odoo dashboards, WIP status reports, and open order reports during daily coordination., • Communicate schedule priorities and resolve supply chain issues using ERP data. Production Planning & Procurement • Review Patriot production schedules and MRP demand in Odoo., • Convert ERP demand into purchase orders and supplier schedules., • Ensure all transactions and status updates are completed accurately in the ERP system. Supply Chain Monitoring • Track component progress through each fabrication stage using ERP workflows., • Address delays or quality issues identified through ERP alerts. Inventory & Throughput Management • Maintain accurate inventory levels and system transactions within Odoo., • Use ERP analytics to balance lead times, safety stock, and throughput requirements. Supplier Performance & Continuous Improvement • Track supplier delivery metrics and lead times in Odoo., • Support continuous improvement initiatives using ERP reporting. Preferred Qualifications • Experience with Odoo ERP (highly preferred)., • Understanding of ERP workflows including purchasing, MRP, inventory, routing/WIP tracking, and forecasting., • Ability to build dashboards, reports, and planning tools within an ERP environment.

Required Qualifications** No experience required. Retail experience and/or farming, ranching, pet/equine, or welding knowledge is strongly preferred. Preferred knowledge, skills or abilities** + Farming, ranching, pet/equine, or welding knowledge is strongly preferred.

Job Description Position Summary Thompson Engineering is seeking a motivated and detail-oriented Certified Welding Inspector (CWI) to join our inspection and quality assurance team. This position is responsible for performing welding inspections and ensuring compliance with applicable codes, project specifications, and industry standards across a variety of construction and industrial projects throughout the Southeast. This role requires the ability and willingness to travel to project sites, including multi-state assignments, and work in field environments as needed to support active construction operations. Key Responsibilities • Confirm welder qualifications and maintain required documentation, • Interpret construction drawings, welding symbols, and technical specifications, • Document inspection findings, non-conformances, and corrective actions, • Coordinate and monitor non-destructive testing (NDT) activities as required, • Prepare daily field reports, inspection summaries, and supporting documentation, • Travel to various job sites, including out-of-town and multi-state assignments, as required, • Follow established safety policies and quality control procedures, • Communicate effectively with project managers, field staff, contractors, and clients Qualifications • Current Certified Welding Inspector (CWI) certification issued by the American Welding Society (AWS), • Minimum 3 years of welding inspection experience preferred, • Working knowledge of applicable welding codes such as AWS D1.1, API 1104, and ASME Section IX, • Strong understanding of welding processes and inspection techniques, • Proficiency with Microsoft Office applications and digital reporting systems, • Strong written and verbal communication skills, • Valid driver's license with a clean driving record, • Ability and willingness to travel frequently and work extended hours based on project needs Physical and Work Environment Requirements • Ability to work in outdoor and construction site environments, • Ability to stand for extended periods and navigate uneven terrain, • Ability to lift up to 50 pounds and perform field-related tasks, • Willingness to work flexible hours, including overtime and travel assignments, based on project needs

Job Description WHO WE ARE We are a company where people matter. We are family driven. We are financially strong. And we are looking for problem-solvers to join our growing team. BENEFITS • Hours for this position are Monday to Friday from 7am to 4pm, • Up to 10% Retirement Contribution, • $500 per Year Wellness Incentive, • Two Weeks Starting Paid Time Off Maintenance Mechanic The primary purpose of this position is to maintain all equipment that is not serviced by outside contractors in an efficient and expedient manner. Keep Preventative Maintenance programs current and work with Management/Contractors on plant improvements and new projects. Maintain the appearance of the grounds and property. Primary responsibilities include: • Perform any maintenance duties on building and plant equipment as needed on a daily basis., • Responsible for compliance with the hose testing as directed by SOP., • Fabricates and installs new equipment and processes as necessary/requested., • Maintain a current Preventative Maintenance (PM) program on required equipment., • Maintain the appearance of the property and grounds in a neat and orderly manner., • All staff members are responsible for reporting food safety problems to their supervisor or the SQF Practitioner upon observation of a known or potential issue., • Uphold Hydrite's Standard of Excellence through a continuous commitment to maintain quality facilities and provide quality products and services to internal and external customers, • Perform all duties outlined in relevant SOPs and all other duties to be assigned., • High school diploma or equivalent., • Must have the following basic maintenance skills and/or experience: welding, electrical wiring, plumping, pipe fitting and carpentry. Some heating/refrigeration experience also helpful., • Knowledge of safe and proper welding techniques., • Must have communication and interpersonal skills, along with the ability to read, write, and speak English. Benefits and perks include 401k and profit sharing, medical/dental/vision/life insurance, paid time off, tuition reimbursement, adoption assistance, legal services insurance, scholarship awards for children of employees, summer picnic, community giving events, free family wellness coaching including nutritionist and fitness coach. WANT TO STAY CONNECTED? FIND US ON SOCIAL MEDIA • LinkedIn: linkedin.com/company/hydrite-chemical-co-, • Facebook: facebook.com/hydrite

Job Description Experienced - Construction Materials Testing ( ACI, Nuclear, Soil, Concrete, Asphalt ) General Responsibilities: Perform field and/or laboratory testing, observation, and inspection of construction materials - soils, aggregates, concrete, asphalt, and steel. Communicate with project manager, engineering technicians, client representative, contractor’s representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. Tabulate, prepare, and submit data and observation in the form of written and digital reports as work is performed for daily transmittal to the Project Manager. Maintain and clean equipment, vehicles and work areas. Adhere to strict safety standards. Essential Roles and Responsibilities: • Performs testing, observation, and inspection as directed in accordance with training and the specified procedures., • Provides clear documentation of findings and results., • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager., • Communicates information to Project Manager and other personnel as directed by the PM., • Has experience and proficiency in multiple areas of field testing and inspection and or laboratory testing, • Train junior or entry level technicians, • Maintains equipment and calibration., • Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management., • High school diploma or equivalent., • 2+ years of relevant experience or the equivalent in training and related experience., • Experience with computer use and Microsoft Word and Excel, • Certifications in one or more of the following areas:, • ACI Concrete Field Testing Technician Grade I, • ACI Concrete Strength Testing Technician, • Certified in radiation safety and Nuclear Density Gauge operation., • NICET Level I or II certification in Construction Materials Testing in one or more of the following categories: Asphalt, Concrete, Soils., • NICET Level I or II certification in Geotechnical in one or more of the following categories: Construction, Laboratory, Exploration, Generalist, • TxDOT Certifications - Level 1A, 1B, SB 101 & SB 102

Job Description The work schedule is 4-3 (4 days on, 3 days off). Unlock Your Potential with Southern Star: Elevate TV Experience and Earnings! Welcome to Southern Star: The Power Behind Satellite TV Service: Imagine being the one who introduces customers to the world of award-winning DISH TV service and a range of cutting-edge products that revolutionize home entertainment. As a Southern Star technician, you're not just a service provider – you're a technology ambassador. With expert knowledge of our diverse products, you're equipped to enhance the way customers view and interact with technology. You're not just selling; you're shaping experiences. Unleash Your Earnings: Compensation Beyond Boundaries: Joining our team isn't just a job – it's a gateway to unparalleled earning potential. Your compensation journey starts with an enticing combination of hourly pay and commissions. But that's just the beginning. Imagine the thrill of performance incentive bonuses lighting up your paycheck. Picture this: your dedication isn't tethered to a fixed hourly rate. Your income isn't limited; it's a reflection of your skills, efforts, and results. Your first-year potential? A remarkable $50,000 - $60,000 or more. And the best part? Your earning capacity expands as you grow, with no limits except the heights of your achievements. Have experience in a related field? We value your expertise and offer a higher starting rate! Crafting Success: Your Journey with Southern Star: Training here isn't just learning; it's a launchpad. With paid training and unwavering support, we equip you for success. Your dedication, coupled with our guidance, could take you to an impressive $50,000 - $60,000 your first year with Southern Star. Yet, the story doesn't stop there. Experienced technicians are earning an exceptional $60,000 - $85,000+ annually. Unveiling the Perks of Partnering with Southern Star: We believe in nurturing our team holistically. Generous compensation is just the tip of the iceberg. Dive into a world of insurance benefits, 401K plans, and paid time off. Enjoy the security of a $25,000 life insurance policy. Imagine driving towards success in a company-provided vehicle once your training is complete. We offer a fantastic Bring Your Own Device plan! You will receive a monthly stipend to use your own smart phone in this role. Elevate your lifestyle with exclusive employee discounts through LifeMart, including home mortgage lender savings. Crafting the Ultimate Customer Experience: Your Toolkit: What sets a Southern Star technician apart? It's more than just technical prowess – it's the art of communication, strategic thinking, and sealing deals with finesse. Our most successful experts excel in upselling while installing DISH systems. They master time management and are adept at articulating their ideas. They epitomize excellent customer service. Your Path to Success: Skills and Beyond: To thrive in this role, you'll need more than skills – you'll need a spirit of adventure. Scale ladders up to 38 ft, navigate crawl spaces, and be ready to travel up to 20% of the time (lodging and per diem covered by SSI). With valid driving credentials and the ability to adapt, you'll be the catalyst of transformation. Your Past Shapes Your Future: Diverse Backgrounds Thrive Here: Don't hold back if you lack direct experience. Skills from cable, construction, plumbing, manufacturing, retail, door-to-door sales, landscaping, and more translate seamlessly. Your journey from installer, customer service, or sales representative is a steppingstone to triumph. Experience with hand tools, power tools, carpentry, handyman, mechanical knowledge, electrical experience, remodeling, roofing, maintenance, low voltage, welding, climbing, equipment repair, and automotive repair lay a solid foundation for success with Southern Star!! Ready to Begin Your Odyssey with Southern Star? Your voyage to an enriching career starts now. Apply today and let's sculpt a future of limitless possibilities together. Please note: This job description is not a contract or guarantee of employment for a definite or specific amount of time.

Job Description Heavy Equipment Mechanic / Diesel Technician Location: Lubbock, TX | Pay Range: $24–25/hr | Employment Type: Direct Hire ABOUT THE OPPORTUNITY Snelling is recruiting an experienced and dependable Heavy Equipment Mechanic / Diesel Technician for a reputable industrial services company in Lubbock, Texas. This hands-on position focuses on the maintenance and repair of diesel and gas-powered trucks, trailers, and heavy equipment used daily in field and shop operations. Ideal candidates will have hands-on repair experience with diesel engines, hydraulics, and mechanical systems, along with the ability to troubleshoot issues independently. This is an excellent opportunity for someone who wants to continue building their diesel and diagnostic expertise within a supportive, growth-minded shop environment. KEY RESPONSIBILITIES • Perform maintenance, troubleshooting, and repairs on a mixed fleet of trucks, pickups, trailers, and heavy equipment (Freightliner, Volvo, Dodge Cummins, forklifts, telehandlers, skid steers, etc.)., • Adjust, rebuild, and replace engines, transmissions, hydraulic pumps, and electrical systems., • Use diagnostic software and handheld tools to identify and correct performance issues., • Inspect, test, and document all repairs and preventative maintenance work., • Maintain shop organization, ensure tool accountability, and adhere to safety standards., • Assist with fabrication or light welding as needed., • Coordinate with management on parts ordering, downtime prevention, and maintenance scheduling., • 2–5 years of experience in truck, diesel, or heavy-equipment maintenance (shop or field)., • Proficiency with hand tools, pneumatic tools, torque wrenches, diagnostic scanners, and lifting equipment., • Familiarity with hydraulic, pneumatic, and electrical systems., • Basic welding or fabrication ability preferred., • Valid driver’s license and reliable transportation (CDL a plus but not required)., • ASE Certification or Diesel Technology coursework preferred but not required., • DOT inspection experience, forklift certification, or OSHA safety training is a plus., • Competitive pay range of $20–25/hr, depending on experience., • Hands-on training is available with the outgoing lead mechanic before transition., • Long-term stability with a respected local employer., • Supportive, family-style culture that values teamwork, reliability, and personal growth. If you’re a motivated mechanic who enjoys solving problems and takes pride in quality repairs, we want to hear from you. Submit your resume today for confidential consideration. Qualified candidates will be contacted promptly to discuss next steps. Point of Contact: Leta Page | Snelling Staffing Services | ABOUT SNELLING Snelling is a locally owned and operated recruiting and staffing firm serving Lubbock and West Texas since 1967. With over 200 years of combined staffing experience, we specialize in connecting top engineering, manufacturing, and skilled-trade talent with leading employers across the region. Recognition & Awards: Forbes Best Professional Search Firms® 2025 • Best of Staffing® Client Satisfaction Diamond Award (2013–2025) • Lubbock Avalanche-Journal Best of Lubbock® – WINNER / Best Employment Agency (2018–2025)

Job Description Truck Equipment Mechanics will work on truck equipment installation and repairs. Preferred applicants should have knowledge in welding, fabrication, hydraulics, electrical and air systems. Candidates must have some tools and must pass background check and drug screen. Hours are M-F, 7:30 - 5:30. Reliably commute or planning to relocate before starting work is required. Must be able to work an 8 hour shift. Must have unsponsored work authorization. Qualification 2 years required mechanical knowledge 2 years required truck equipment installation and/or fabrication Pay: $18.00 - $22.00 per hour depending on experience Benefits: • 401(k), • Health insurance, • Paid time off

Job DescriptionMasterTech is on the search for experienced Diesel Mechanics in the Lubbock TX area. Mechanics will be responsible for the maintenance, diagnostics, and repair of a diverse line of heavy equipment in a shop and field service environment. Compensation: • $26.00 - $39.00/hour+ based on experience, training, certifications, etc., • Comprehensive benefits plan. Company pays 100% of employee premiums. Benefits include medical, dental, vision, life insurance, paid time off, etc., • 401K with matching contributions., • Boot and tool allowance., • 3 or more years of experience as a Diesel Mechanic, or completion of a Diesel Technology/Mechanic program., • Good understanding of mechanical, electrical, and hydraulic systems., • Able to read and interpret blueprints and schematics., • Proficient with diagnostic scanning tools., • Welding experience is preferred., • Working knowledge on construction, earth moving, forestry, mining, landscaping, etc., equipment is preferred.