Trabajos welding en Atlanta, GeorgiaCrear alertas

Auto Body Technician Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision? • Paid Weekly, • Continuous Training, • Supportive Team Culture, • Company match 401K, • Medical/Dental/Vision, • Paid Time Off - 6 Paid Holidays, • Rewarding Work Responsibilities • Complete disassembly of vehicle to assist Collision Estimators in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Plan work procedure: follow work order for all operations listed, • Remove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage, • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept., • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards, • Perform other related duties as assigned, • Comply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications • Must be at least 18 years of age, • I-CAR / ASE certifications preferred, • 2-3 years’ collision repair experience preferred, • Valid Driver's License Required, • Customer-focused attitude with the ability to work well in a team environment, • Ability to read and comprehend written instructions and information, • Successful completion of background check required Behaviors/Competencies: • Integrity-Respect and accountability at every level and every interaction, • Customer Service-Provide the highest level of customer service while building customer satisfaction and retention, • Innovation-Develops and displays innovative approaches and ideas to our business, • Teamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, please e-mail recruiting@classiccollision or call 470-500-6808. This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. U65j5bDznE

Job Description Job Description – MIG/TIG Welder Clyde Industries is the preeminent provider of highly engineered boiler efficiency/cleaning systems, spare parts and services for the global pulp & paper industry and a leader in providing equipment and aftermarket part solutions for industrial applications with a topflight team operating in North America, South America, Scandinavia and Indonesia. Clyde Industries has developed significant innovations in our core sootblower offering, encompassing mission critical technologies designed to remove residue and deposits that build up in recovery and power boilers (with such residue creating safety hazards, process efficiency reductions or complete boiler shutdown if not properly eliminated). Clyde Industries not only provides the equipment, but a host of related services and aftermarket assistance to support our customers’ operations, with a particular focus on and expertise in helping established and emerging pulp & paper customers. Clyde Industries is constantly innovating to expand its offerings with a focus on continuing to drive increased value for customers. As a global leader of highly engineered industrial applications and service provider of the highest caliber, Clyde Industries looks forward to building on its history of innovation and superior customer-centric solutions. Clyde Industries is actively hiring for a MIG/TIG Welder. We are seeking an experienced MIG/TIG Welder who has experience operating automatic welders. The candidate must be able to read and understand drawings and weld symbols. Candidate should have experience welding various diameters of pipe materials to include stainless steel. We are looking to hire someone with a service driven attitude that has the desire to learn, grow, and lead by example. This is currently a 2nd shift opening (1:30pm-10:00pm Monday thru Friday. Training will take place for an estimated 1 month with some hours potentially being on day shift from 7:00am-3:30pm Monday thru Friday. Once candidate is fully trained (at the discretion of the trainer) he or she will work on 2nd shift. At times there may be mandatory overtime required to meet production needs. This is a non-exempt position and our targeted hourly rate for the role is $18/hour to $24/hour and offers will be determined based on candidate’s experience. This position is Full Time with comprehensive health and wellness benefits and located at: 4015 Presidential Parkway Atlanta, GA 30340. Summary of Responsibilities (not comprehensive of all tasks): Follow welding procedures and maintain different qualifications for various types of weld joints. Use materials and fillers required for tube welds including dissimilar materials. All tube welders shall be qualified in accordance with ASME Section IX Products are installed in boilers which require special welding criteria to be accepted. Fits and welds assemblies using jigs and fixtures Follow all safe work practices and policies Verifies quality of work and signs off on quality checklists where required Qualifications 2 years welding technical school or equivalent 3 - 5 years of experience as a TIG welder in a manufacturing environment. Must be skilled in all facets of TIG, MIG, and stick welding Proficient at TIG welding including pipe welding Knowledge and ability to heat, form and straighten metal parts to restore alignment from distortion Ability to use precision measuring equipment to inspect dimensions and angles including calipers, micrometers, protractor, and other precision measuring devices Ability to identify any faults in operating equipment or in relation to materials Ability to control the fitting and welding process to avoid problems in relation to excessive distortion, expansion, or shrinkage of welded parts Ability to produce 100% penetration welds that are radio graph acceptable Ability to set up and operate semi-auto welding equipment Ability to fit up pipe/tube sections, flanges and nozzles and nozzle fabrications with accuracy Ability to select and set up welding equipment Ability to ensure welds meet standards and specifications Proficient at MIG welding Ability to use cutting equipment effectively and efficiently Ability to read and understand engineering drawings including weld symbols Proficient at grinding, filing, sanding, and deburring completed parts Math skills to include ability to add, subtract, multiply and divide in all units or measurement including fractions and decimals General Able to work shift hours as mentioned above and overtime as required. Physical Requirements: Must be able to stand for long periods of time. Must be able to lift 30 lbs Environmental Working Conditions: Work for this role is performed inside and outside in an industrial environment and is a very hot environment working around flame and gases. Disclaimer: Nothing in this job description restricts Management’s right to assign or reassign duties and responsibilities to this job at any time. Clyde Industries is an Equal Opportunity/ Affirmative Action employer and provides reasonable accommodation in its application process for qualified individuals with disabilities and disabled veterans. Job Type: Full-time Salary: $18.00 - $24.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Referral program Vision insurance Shift: 8 hour shift – 2nd shift (1:30 pm - 10:00 pm) Weekly day range: Monday to Friday Ability to commute/relocate: Atlanta, GA 30340: Reliably commute or planning to relocate before starting work (Required)

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”) This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $174,600.00/Yr. ID 2026-19663 Category Body Technician Position Type Regular Full-Time Location : Postal Code 30318 Location : Address 1491 Howell Mill Road Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $174,600.00/Yr. Prioritization Tier 1 – Priority

Job Description D7 Pneumatics LLC is seeking skilled Field Welders / Fabricators to support installation, repair, and modification work inside active sawmill facilities. This position focuses primarily on stick welding (SMAW) and field fabrication of handrails, catwalks, structural supports, and access platforms. The ideal candidate is comfortable working in industrial environments, capable of reading field measurements, and able to fabricate safely and efficiently with minimal supervision. Key Responsibilities * Perform stick welding (SMAW) in field environments * Fabricate and install handrails, catwalks, and access platforms * Measure, cut, fit, and assemble structural steel components * Interpret basic fabrication drawings and field sketches * Modify existing structures to meet safety and operational requirements * Work safely inside active sawmill environments * Maintain welding equipment and fabrication tools * Follow company safety procedures and site-specific safety requirements * Coordinate with supervisors, mill personnel, and project teams * Travel to job sites as required Required Qualifications * 2+ years of stick welding (SMAW) experience (industrial preferred) * Experience fabricating handrails, catwalks, or similar steel structures * Ability to work safely in active industrial/sawmill environments * Ability to read tape measures and perform accurate field measurements * Ability to lift 50+ lbs and work at heights when required * Reliable transportation to job sites * Strong attention to safety and detail Preferred Qualifications * Experience working in sawmills or lumber processing facilities * Experience with structural steel layout and installation * Ability to read fabrication drawings or blueprints * OSHA 10 or OSHA 30 certification * Experience operating basic fabrication equipment (grinders, torches, magnetic drills, etc.) Work Environment This position requires work in: * Active sawmill production environments * Elevated work areas and catwalks * Outdoor and indoor industrial conditions * Hot, cold, dusty, and high-noise environments Proper PPE is required at all times. Physical Requirements Candidates must be able to: * Lift and carry materials up to 50 lbs * Climb ladders and access elevated platforms * Stand for extended periods * Work in confined or tight fabrication areas when required

Job DescriptionWe are looking for skilled Welders to join a fast-paced manufacturing team. In this role, you will perform welding on various metal components, ensuring strong, precise, and high-quality welds. This position requires attention to detail, hand-eye coordination, and the ability to work safely in a manufacturing environment.Key Responsibilities: • Perform welding (MIG/TIG/Stick as applicable) on metal components, • Read and interpret blueprints, work orders, or specifications, • Inspect welds for quality, accuracy, and adherence to standards, • Operate welding equipment safely and maintain tools, • Follow all safety protocols and company procedures, • Assist with fabrication and assembly tasks as neededQualifications:, • Previous welding experience in a manufacturing or fabrication environment, • Knowledge of MIG, TIG, or Stick welding preferred, • Ability to read blueprints and work instructions, • Strong hand-eye coordination and attention to detail, • Ability to lift, bend, twist, and stand for extended periods, • Reliable, punctual, and team-orientedPhysical Requirements:, • Frequent lifting and handling of metal components, • Standing for most of the shift, • Bending, twisting, reaching, and holding positions while welding, • Repetitive hand and arm motionsSchedule:, • Monday–Friday, 5:00 AM – 1:30 PMCompany DescriptionConnecting Companies with Good Employees, and Employees with Good Companies!!Connecting Companies with Good Employees, and Employees with Good Companies!!

Job Description Now Hiring: Skilled Combo Welders (Stick/TIG) United Trades of America is seeking experienced and highly skilled Combo Welders for projects in Georgia. This opportunity is ideal for welders who specialize in both Stick (SMAW) and TIG (GTAW) welding processes and are confident working on complex, high-code piping systems. About the Role This position requires a welder with expertise in the Master Combo Weld Test on 2" schedule 160 wall pipe, a critical qualification involving welding in the 6G position. The test covers welding with both Stick and TIG processes in accordance with stringent power piping codes B31.1 and B31.3 and includes X-ray inspection to ensure the highest quality welds. Due to the high cost and technical complexity of the testing process, candidates must be highly confident and seasoned in these skills. The successful candidate will perform pipe welding tasks on-site, working primarily with carbon steel pipe with thick walls (schedule 160). The role demands precision, attention to detail, and the ability to work under code requirements used in power plants, refineries, and industrial construction projects. Requirements * Onsite Weld Test: Must pass the Master Combo Welder Test on 2" schedule 160 wall pipe (Stick/TIG), including X-ray inspection, following B31.1 and B31.3 power piping codes. * Experience: Proven experience as a combo welder in industrial or heavy construction environments. * Skills: Proficiency welding in the 6G position, with both SMAW and GTAW processes. • need to be proficient with nickel based alloy welding Certifications: While the test serves as certification, additional welding certifications are a plus. * Background: Must pass drug screening and background check. Compensation & Benefits * Competitive hourly pay ranging from $28 to $34 based on experience. * Opportunity to work on high-profile projects with a reputable company. How to Apply If you are a qualified, detail-oriented Combo Welder ready for your next challenge, we want to hear from you! Apply by sending your resume directly to . Please include any relevant certifications and welding test results if available.

Job Description Job Summary The Welder position will perform diversified hand welding on a wide variety of complex assemblies and structures using welding equipment to fabricate or repair products such as machined parts and trenching and shoring equipment. This position is a safety sensitive role that requires compliance with the company's drug and alcohol policy and adherence to all safety regulations and procedures. Key Responsibilities • Receives instructions, prints, and work orders for the job. Plans details of working procedure, and tool and material requirements., • Fabricates equipment by cutting, burning, and welding various metals., • Repairs equipment by using welding techniques and appropriate welding equipment., • Cleans and prepares surfaces to be welded. Sets up, assembles, and tacks weld parts., • Repairs worn or defective surfaces., • Uses burning equipment to dismantle assemblies and to cut material to size and shape., • Keeps equipment and work area clean and orderly., • May be assigned to dismantle or cut up obsolete equipment, setting aside parts for scrap dealers., • Completes other tasks as may be assigned by the Supervisor., • Must sign acknowledgment of reading and understanding the Company’s safety policy and adhere to all Company safety rules and regulations. Knowledge and Skills • Must have the ability to lift up to 50 pounds., • Must be willing to work hours as required., • Completion of a formal apprenticeship program or completion of Company training program to the satisfaction of the Supervisor., • Strong attention to detail, precision, and control., • Emotional Intelligence, collaboration and communication skills, • Quick thinker and ability to prioritize safety first, • Organization and project management methodology Qualifications • Minimum (2) Two years welding experience, • Ability to obtain forklift certification as required, • Excellent medical, dental, and vision plans, • 401(k) retirement plan with company match and immediate vesting, • Team Ownership Program (TOP) grants an annual stock award to every active full-time employee. TOP is unique for a privately held company but is offered to show how much we value our employees!, • Flexible spending and health savings accounts, • Basic and Voluntary life and disability insurance, • Paid Time Off that is either awarded or begins to accrue on the first pay period, • 8 paid holidays, • Birthday and Work Anniversary holidays after one year of service, • Incentive bonus plans About our Team: At National Trench Safety (NTS), our team of employees is our most valuable asset and one of our customers’ greatest resources. NTS was built around a team of experienced industry professionals, and as NTS continues to grow we continue to attract talented individuals. The NTS team contains some of the industry’s most respected and recognized trench safety veterans. NTS is a customer service-focused organization, which can be reflected in the company’s culture and commitment to its customers. NTS is an equal opportunity employer M/F/D/V. Qualified candidates will receive consideration for employment regardless of race, color, religion, sex, nation origin, sexual orientation, gender identity, disability, or protected veteran status.

Job Description Pipe Welders needed for commercial projects near Atlanta, Georgia area. The job is a multi-story building renovation. You may be welding on carbon steel pipe sizes 2-1/2"-8". You will be stick/tig welding. The procedure is SMAW (6010). You must have an OSHA 10 cert. You must have your welding hood and leathers. You must have all tools of the trade. You will have to pass a background check and drug test before arrival on jobsite. Pay: up to $38/hour Per Diem: None Duration: 3 months Hours: 40/week Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888-230-9908 Fax: 888-230-9909 Email: Company DescriptionWe believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job DescriptionDescription: Join our expanding team! Venturi Supply is the parent company to a national network of distributors specializing in pipe, valves, fittings, tanks, and industrial supplies, proudly serving a wide range of industries. With deep local roots and national reach through the Venturi Supply platform, our mission is to deliver the critical materials, custom solutions, and reliable service our customers depend on. At the heart of everything we do is our people. From the shop floor and counter to the job site and field, it’s our team’s expertise, commitment, and problem-solving mindset that set us apart. Their dedication fuels our service, drives our accuracy, and ensures every order is handled with care and urgency. Backed by strategically located branches, a vast inventory, in-house fabrication capabilities, and decades of real-world experience, our teams connect infrastructure and industry to the essential resources they need to operate safely, efficiently, and successfully. We’re more than a distributor—we’re a trusted partner built on strong relationships, operational know-how, and a relentless focus on customer success. Role Overview The role of Welder includes construction of various fabricated parts and assembly from engineered prints by cutting, fitting, and welding. Responsibilities · Operates welding equipment to fabricate components and assemblies including structural frames, and piping. · Read blueprints and drawings to build designed fabrications. · Lay out and fit up fabricated components with tight tolerances indicated in drawings/prints using appropriate tools. · Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead) which may be subjected to non-destructive testing (NDE including but not limited to Xray, PT, MT, UT). · Visually inspect welds and material and repair flaws by cutting, grinding, or air arc. · Maintain equipment in condition that does not compromise safety. · Keep a clean and organized work area. · Performs additional duties as assigned or required. Requirements: • High School Diploma or GED Required., • Certified in GMAW or FCAW ASME IX required. GTAW ASME IX preferred., • 1 or more years of experience in MIG or Flux Core Welding. TIG experience a plus, • 1 or more years of experience using tools relevant to welding and fabrication (saws, squares, grinders, torches, etc.), • Ability to read and interpret technical documents and drawings. This includes welding symbols and fabrication instructions on blueprints., • Able to read a tape measure and utilize math skills required for fabrication., • Ability to effectively communicate [written and verbal]., • Thrives in a collaborative team environment., • Detailed oriented work style comfortable with multiple priorities being juggled while maintaining a consistent work approach., • Physical requirements: Lift/push/pull 50 lbs., bend twist, stand for extended periods of time. Climb and reach for items, use an overhead crane, forklift, and endure frequent exposure to outside weather conditions. We're dedicated to our employees' and their families' health and well-being. • Two medical plans, including HSA-qualified, with virtual care., • Dental and vision coverage, including kids' orthodontia., • HRA reimbursement eligibility., • Enjoy 10 paid holidays and accrue PTO from your first day., • Access a robust Employee Assistance Program (EAP) with 24/7 support for you and your family., • Join a team that values integrity and innovation., • Grow as a leader in industrial distribution with cutting-edge automation and supply chain solutions.

Job Description ABOUT THE COMPANY Our founders, food industry veterans Mike and Tisha, knew that food wasn't what it used to be. They wanted to make it better—by creating a new kind of farm. A farm that can grow up to 300 times more food than an open-field farm on a smaller footprint, without use of herbicides, pesticides, or other chemicals that you don’t want in your food. A farm powered with 100% renewable energy, growing with 95% less water and delivering food within 48 hours, for longer freshness for our customers and less food waste. 80 Acres Farms is a vertical farming leader, operating commercial farms in Ohio, Kentucky, and soon Georgia in addition to research and development farms in Arkansas and The Hague, Netherlands. All farms utilize state-of-the-art technology and analytics developed by the company's subsidiary, Infinite Acres. 80 Acres Farms-branded salads, microgreens, herbs, and tomatoes are available at retailers and food service distributors from Michigan to Florida, including Kroger, Whole Foods, The Fresh Market, Dorothy Lane Markets, Sysco, and US Foods. 80 Acres Farms is supported by world-class investors and partners, including General Atlantic, Siemens, Barclays, Ocado, and Signify Philips. If you're interested in making a difference, join our team and help us change how the world eats. POSITION OVERVIEW We are looking for a highly skilled, dedicated, Industrial Maintenance Technician to join and lead our maintenance team in the growing future of indoor farming! The ideal candidate is a self-motivated, team player with great people and collaboration skills, who promotes a team atmosphere, applies root cause analysis principles, and supports process improvements in our fast paced always growing culture. Key responsibilities and duties: • Advanced troubleshooting of mechanical systems and sub-systems, • Advanced electrical troubleshooting of equipment, • Perform preventative maintenance tasks, • Ownership of a functional process area, • Some mentoring and training of less experienced maintenance staff, • Follow all safety and food safety requirements, PPE, LOTO, while culturing a safe work environment, • Provide feedback to Planner on preventative maintenance tasks and schedules, • Perform daily facility walkthroughs and inspections, • Utilize CMMS to open/close workorders, schedule PM’s, create workorders, etc., to meet workflow and compliance KPI’s, • On call availability for off hour critical failures, • Develop and maintain good working relationships with everyone in the organization, • Maintain tools, supplies, and clean organized work areas, • 4+ years of industrial maintenance experience preferred, • Proficiency with electrical: reading schematics, utilizing volt/ohm meter, etc. (120, 240, 480VAC, 24VDC), • Some HVAC/Hydronic experience preferred, • Ability to understand and troubleshoot control components, inputs/outputs, PLC’s, HMI’s, pumps, motors, plumbing, heat exchangers, photoeyes, servo drives, proximity sensors, VFD’s, flow control, timers, etc., • Safe operation of warehouse equipment such as scissor and fork lifts, • Personal Protective Equipment, LOTO, confined space, arc flash, and safety compliance, • Ability to regularly lift, bend, stretch, crawl, utilize manual dexterity, navigate ladders/catwalks, stand and/or walk for long periods of time without limitation, • Lift 75lbs unassisted, • Follow all company policies, procedures, safety, and food safety guidelines, • Flexible working hours, willing to work scheduled, unscheduled, and on call overtime, • Work in non-climate and cold environments, that may be noisy and/or have low lighting, • Deep knowledge of some mechanical and/or electrical systems, • Strong problem-solving skills, • Proficiency with electrical: reading schematics, utilizing volt/ohm meter, etc. (120, 240, 480VAC, 24VDC), • Some HVAC/Hydronic experience preferred (certifications a plus), • Welding preferred: mig, tig, stick, aluminum, stainless steel, • Water & filtration systems, pumps, plumbing, etc., • Preventative and Predictive maintenance to maximize uptime BENEFITS WE OFFER YOU • Health, dental, and vision insurance starting day one of employment, • Minimum two weeks paid vacation, • One week paid health & wellness time, • 10 paid holidays, • Parental leave, • 401k with up to 4% Company match, • Company-paid life insurance, • Short and long-term disability insurance ABOUT OUR HIRING PRACTICES Statistics show that underrepresented communities don’t apply for a job unless they meet 100% of the qualifications. Don’t worry if you think you can’t check every box on the list; we’ll provide all the on-the-job training you need. 80 Acres Farms is an equal opportunity employer. You’re defined by more than just your job title, and we want you to feel comfortable bringing your true self to work. We value your talents, your traditions, your take on the world, and everything else that makes you unique. We strive to be to be a place where a diverse mix of talented people want to come, to stay, and to do their best work. 80 Acres Farms participates in E-Verify. As required by law, your employment with the Company is contingent upon you providing legal proof of your identity and authorization to work in the United States. Employment decisions are made without regard to protected characteristics. All candidates will be given the same consideration.

Job Description Job Overview We are seeking a dynamic and skilled Multifamily Residential Maintenance Technician to join our team in Brookhaven, GA. This energetic role is vital in maintaining the comfort, safety, and aesthetic appeal of our residential communities. As a Maintenance Technician, you will be responsible for performing a wide range of repair and maintenance tasks across our multifamily properties, ensuring that all facilities operate smoothly and efficiently. Your proactive approach and technical expertise will help create an inviting environment for residents and uphold the high standards of our community. Responsibilities • Conduct routine inspections and preventative maintenance on building systems, including electrical, plumbing, HVAC, and mechanical equipment., • Troubleshoot and repair issues related to electrical systems, using schematics and tools such as ohmmeters to diagnose faults accurately., • Perform welding, residential painting, and other carpentry tasks to maintain property aesthetics and structural integrity., • Operate programmable logic controllers (PLCs) and utilize CMMS (Computerized Maintenance Management System) software to track work orders and maintenance history., • Read and interpret schematics, mechanical drawings, and electrical diagrams to facilitate repairs and upgrades., • Supervise or assist with facilities maintenance projects, ensuring safety standards are met while delivering quality results., • Provide excellent customer service by addressing resident repair requests promptly and professionally., • Proven experience in facilities or residential maintenance, ideally within multifamily or manufacturing environments., • Strong electrical experience with knowledge of schematics, wiring, circuit testing, and troubleshooting using tools like ohmmeters., • Mechanical knowledge including plumbing, HVAC systems, welding techniques, and general carpentry skills such as painting and drywall repair., • Familiarity with programmable logic controllers (PLCs) and CMMS software for work order management., • Demonstrated supervisory or leadership experience in a maintenance setting is preferred., • Excellent communication skills in English to effectively coordinate with team members and residents., • Ability to read technical schematics, mechanical drawings, and electrical diagrams accurately. Join us to be part of a vibrant team dedicated to maintaining exceptional residential communities! Your expertise will directly impact residents’ quality of life while advancing your career in a fast-paced, rewarding environment. #ZIPDH BGSF is an Equal Opportunity Employer. We are committed to providing equal opportunities for employment to all qualified people, regardless of race, color, national origin, religion, sex, age, disability status, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Company DescriptionBGSF, Inc A multi-division, publicly traded workforce solutions firm. Led by functional business experts in light industrial, multifamily and information technology. Comprehensive services, from individual fill-ins and placements through turnkey solutions. Independent branch office operating model creates a scalable platform that facilitates expansion. The management, range of service and experience to drive profitable growth for our temporary employees, our dedicated staff, our partner clients and the investors we serve.BGSF, Inc\r\n\r\nA multi-division, publicly traded workforce solutions firm.\r\nLed by functional business experts in light industrial, multifamily and information technology.\r\nComprehensive services, from individual fill-ins and placements through turnkey solutions.\r\nIndependent branch office operating model creates a scalable platform that facilitates expansion.\r\nThe management, range of service and experience to drive profitable growth for our temporary employees, our dedicated staff, our partner clients and the investors we serve.

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. Overhead Door Company of Atlanta™, a DH Pace Company, Inc., is seeking Commercial Door Service Technicians that want a career not just a job! Upon completion of training, you will be rewarded with your own company work vehicle! Job seekers with a background in construction labor, electrical work, fabrication, carpentry, installing and servicing products, and mechanic experiences typically do well in this job. Job Responsibilities: • Work independently to install repair a wide range of commercial doors and operating systems., • You will successfully identify opportunities to provide customers with products and services., • Employees will be responsible for tracking and maintaining job related paperwork and submitting in a timely manner., • Install quality products and provide professional services for homeowners and homebuilders., • 1-3 years in a construction related industry., • 1-3 years of welding and/or electrical experience preferred, not required., • Must have excellent communication and organizational skills., • Good Mechanical aptitude. Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. HIRING BONUS! $1,500 WITH VERIFIABLE INDUSTRY EXPERIENCE IN COMMERCIAL DOOR OR ENTRY DOOR SYSTEMS! Overhead Door Company of Atlanta™, a DH Pace Company, Inc., is seeking Commercial Door Service Technicians that want a career not just a job! Upon completion of training, you will be rewarded with your own company work vehicle! Job seekers with a background in construction labor, electrical work, fabrication, carpentry, installing and servicing products, and mechanic experiences typically do well in this job. Job Responsibilities: • Work independently to install repair a wide range of commercial doors and operating systems., • You will successfully identify opportunities to provide customers with products and services., • Employees will be responsible for tracking and maintaining job related paperwork and submitting in a timely manner., • Install quality products and provide professional services for homeowners and homebuilders., • 1-3 years in a construction related industry., • 1-3 years of welding and/or electrical experience preferred, not required., • Must have excellent communication and organizational skills., • Good Mechanical aptitude. Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Job Title: Industrial Plumber / Gas & Air Systems Technician Location: Manufacturing Facility (Multi-Building Campus) Pay: $22–$25 per hour (based on experience) Shift: Full-Time | Day Shift Summary We are seeking a skilled Industrial Plumber / Gas & Air Systems Technician to join our Maintenance Department. This role is responsible for installing, maintaining, and troubleshooting compressed air, gas, and piping systems across multiple buildings within a manufacturing facility. The ideal candidate will have hands-on experience with industrial piping systems and a strong focus on safety, reliability, and minimizing production downtime. Key Responsibilities • Install, modify, and maintain compressed air, gas, and piping systems throughout multiple buildings, • Run new air and gas lines to support equipment installations and facility expansions, • Troubleshoot and repair leaks, pressure issues, and system inefficiencies, • Ensure all systems comply with safety standards, codes, and regulatory requirements, • Coordinate with maintenance and production teams to minimize operational downtime, • Perform routine inspections and preventative maintenance on piping and distribution systems, • Maintain documentation of system changes, repairs, and maintenance activities Required Qualifications • Experience with industrial plumbing, piping, or mechanical systems, • Knowledge of compressed air systems, gas distribution, and pressure regulators, • Ability to work in a manufacturing environment around welding, laser, and robotic equipment, • Strong problem-solving skills and attention to safety procedures, • Ability to work across multiple buildings and manage maintenance projects independently Preferred Qualifications • Experience working in manufacturing, fabrication, or metal production environments Please complete the online application at

Composition Brands is an independent residential kitchen and outdoor living company with a portfolio of premium and ultra-luxury brands including Viking, AGA, Rangemaster, La Cornue, Lynx, and U-Line. With operations across North America and Europe, the company is focused on long-term brand stewardship, thoughtful design, and scalable growth. To learn more, visit ___. Role Summary: The Group Quality Manager leads the end-to-end global quality strategy across all appliance platforms, manufacturing sites, suppliers, and contract manufacturing partners. This role ensures product safety, regulatory compliance, reliability, and a consistent premium customer experience while reducing warranty costs and protecting brand reputation in high-volume, long-life products. Serving as the global leader for appliance quality strategy, this position oversees mechanical, electrical, electronic, thermal, and software-related quality throughout the full product lifecycle - from concept development through field performance - across refrigeration, cooking, ventilation, and dishwashing product categories. This role reports directly to the President and is based in the Atlanta, GA area, with approximately 30–50% travel to domestic and international manufacturing sites, suppliers, and contract manufacturing partners. Responsibilities: Quality Strategy & Governance • Define and deploy a global quality strategy for major appliances aligned with brand, safety, cost, and reliability objectives., • Establish standardized quality policies, procedures, and KPIs across all regions and platforms., • Act as executive escalation owner for product safety incidents, regulatory actions, recalls, and field campaigns., • Own and govern the group QMS aligned appliance-specific requirements., • Ensure compliance with UL, CSA, IEC, CE, NOM, DOE energy efficiency, EPA refrigerant regulations, and regional safety standards., • Lead internal, external, customer, and certification audits, as needed., • Partner with R&D to embed design-for-quality, design-for-reliability, and design-for-compliance., • Govern DFMEA, DVP&R, reliability testing, HALT/HASS, and validation plans., • Ensure robust design transfer and quality gates from concept through SOP., • Standardize quality processes across major appliance assembly lines, including:, • Critical-to-safety and critical-to-quality characteristics, • SPC and process capability for key operations, • Functional, safety, and end-of-line testing, • Drive defect prevention through error-proofing, in-line controls, and layered process audits., • Define supplier quality standards for critical major appliance components including compressors, sealed systems, gas components, heaters, motors, PCBs, wiring harnesses, insulation, coatings, and structural parts., • Oversee supplier qualification, audits, and ongoing performance., • Partner with Sourcing to mitigate supply risk and manage supplier change control., • Own customer quality metrics including warranty claims, field failures, service call rates, and repeat repairs., • Partner with Service, Field Operations, and Retail partners to analyze failure trends., • Lead structured root cause analysis and corrective actions for systemic issues., • Establish and manage Cost of Poor Quality (COPQ) across plants and suppliers., • Lead cross-functional initiatives to reduce scrap, rework, returns, and warranty expense., • Deploy Lean Six Sigma and reliability engineering methodologies. Requirements: • Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, or related), • 12+ years of quality leadership in major appliance or durable consumer goods manufacturing, • Strong knowledge of regulations and certification processes, • Proven success reducing warranty and field failure costs., • Ability to lead global, cross-functional teams., • Proven ability to influence, manage teams, and deliver change., • New product development and release readiness experience., • Six Sigma Black Belt or equivalent preferred., • Experience leading recalls, field campaigns, or regulatory investigations preferred., • Experience in global manufacturing and sourcing environments preferred., • Experience in lean transformation and development of engaged workforce culture preferred., • Reliability testing experience preferred., • Experience in sheet metal fabrication, paint, welding, final assembly preferred. Composition Brands is an Equal Employment Opportunity (EOE/M/F/Vets/Disabled) employer and welcomes all qualified applicants.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: The Mechanical Designer is responsible for designing and detailing large fabricated weldments and assemblies. This role requires expertise in CAD software, a strong understanding of fabrication and welding practices, and the ability to create precise and functional designs. The Mechanical Designer collaborates closely with engineering and fabrication teams to ensure designs meet Vulcan Materials standards. Design and Drafting: • Create detailed 3D models and 2D drawings of large fabricated weldments, including frames, structural components, and assemblies, using CAD software (e.g., AutoCAD, Inventor, or Fusion 360)., • Work with engineers and fabrication teams to develop designs that meet project specifications., • Apply welding symbols, GD&T, and appropriate material specifications in all designs., • Coordinate with welders and fabricators to resolve design-related issues during production., • Participate in design reviews, offering practical solutions to improve designs and processes., • Prepare and maintain accurate documentation, including assembly drawings, shop details, and bills of materials (BOMs)., • Identify and implement improvements to design processes, reducing Fabrication time and cost., • Office setting with occasional time on the shop floor or fabrication site., • Will require occasional travel to plant locations (20%)., • Associate or Bachelor's degree in Mechanical Engineering, Mechanical Design, or a related field preferred., • Advanced proficiency in CAD software (e.g., Fusion 360, Inventor, AutoCAD)., • Strong knowledge of welding processes, materials, and fabrication techniques., • Familiarity with welding standards and codes., • High attention to detail with excellent problem-solving skills. Great Company Culture. Our people share a competitive drive for ___ in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. ___ to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing ___. Health Benefits. Medical, Dental, Vision programs, ___. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see ___ and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. : Engineering : North Carolina-Winston Salem : Georgia-Atlanta : GM - EAD DIV OH : Full-time : Feb 5, 2026, 3:12:40 PM

Responsibilities ECS Limited is offering a unique opportunity for a talented Specialty Technician to join our College Park team and advance in a dynamic work environment. You'll work on a variety of projects performing field observations and inspections, and may also work with steel performing destructive and non-destructive testing (NDT). Responsibilities • Field Activities: Perform observations, testing, inspections, and sampling of various construction materials, including soils, aggregates, concrete, grout, masonry, asphalt and structural steel placement; Execute tasks based on project requirements under the guidance of senior technicians, staff professionals, and project managers; Inspections may also be conducted in fabrication facilities., • Testing Procedures: Conduct routine observations of structural steel and reinforcing steel, including welded or bolted connections using various methodologies and testing equipment following industry standards for documentation and compliance., • Data Collection: Perform calculations and data reduction based on sampling, test results, and inspections; Engage in drafting and other administrative duties as required; Maintain organization of field equipment and notify supervisor of broken or missing equipment as applicable., • Communication: Maintain daily communication with site contractors, other technicians, and project managers, keeping the team informed of changing site conditions and requested additional testing; Attend project meetings as requested. As your experience grows, ECS will: • Support you in enhancing your professional skills to advance and grow with us. Required Qualifications • 2+ years of related experience., • High School diploma or GED., • Must have or be willing to obtain 2 relevant specialty certifications from industry authorities such as NRC, NICET, WACEL, ACI, IFC, AWS, ASNT, ASTM (other authorities may be considered at ECS discretion)., • Position requires carrying 40 - 70 lbs multiple times a day or occasionally lifting 85 lbs to waist height., • Must have valid driver's license and insurance., • Must provide suitable transportation for use on job sites - Mileage will be reimbursed., • Strong communication skills (speaking, reading, and writing)., • Working knowledge of destructive and non-destructive testing principles, applications, and testing standards., • Good understanding of heavy construction safety, practices, and procedures., • Ability to perform work at heights., • Proficiency with electronic devices such as phones, tablets, and laptops., • Functional ability to read and interpret engineering and construction plans., • Basic knowledge of MS Office., • The following US Military ranks will qualify for this position IF they also meet the education, certification, and licenses requirements from the above section titled "Required Qualifications": ECS Group of Companies (ECS) was founded in 1988 with the goal to raise the standards of professional engineering consulting. Today, we are a leader in geotechnical, construction materials, environmental and facilities consulting services. We are employee-owned with more than 3,000 employees in 100+ offices and testing facilities coast to coast. ECS is currently ranked #66 in Engineering News-Record's Top 500 Design Firms (April 2025), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). For additional information about ECS, visit: ___ ECS is an Equal Opportunity Employer. To learn more, click___.

Job Description Position Community Service Supervisor Reports to Community Manager and Regional Service Manager: POSITION SUMMARY: The Community Service Supervisor performs general and/or specialized maintenance and repairs, applies proficient skills in several maintenance trade disciplines, supervises a team of maintenance technicians and assistants, manages a budget for the most cost effect practices, and provides supervision, training, and development for assigned associates. In addition, and along with the Community Manager, the Community Service Supervisor is responsible for overseeing the physical property, general maintenance repairs, unit make-readies, preventative maintenance, and construction or rehabilitation projects for the apartment community. JOB SPECIFIC COMPETENCIES: • Provides service to residents in a prompt, courteous, and professional manner, • Establishes emergency maintenance on-call and daily work schedules for maintenance staff and meets with the Community Manager daily to report on the status of all scheduled work orders, • Follows up on work assignments for efficiency and thorough completion, • Instructs staff on and enforces work policies and procedures, safety procedures, and the use and maintenance of equipment and maintains on-site safety binder, • Makes regular inspections of the community, notifies management of problems and recommends solutions, • Can identify and correct hazardous property conditions that could place the property in a liable position, • Utilizes a preventative maintenance program to minimize the cost of maintenance and downtime of equipment and units by maintaining an adequate inventory of all parts, tools, and equipment, • Obtains competitive pricing on purchases maintains control through purchase orders, oversees contract labor, and orders materials as needed and approved by the Community Manager, • Assists Community Manager in preparation of annual budget to maximize income, control expenditures and maintain financial objectives to meet pre-determined budgetary goals POSITION QUALIFICATIONS: Education: • High School Graduate or General Education Degree (GED) for consideration, • HVAC/Freon Recovery Certification, • CPO (Certified Pool Operator) and EPA Universal certificates preferred, • Minimum of three (3) years related experience, • Completion of in-house training within the first 90 days of employment, • Enjoy the work that they do demonstrate a pleasant demeanor on the job and show a desire for success, • Exhibits behavior that is consistent with the Vision, Mission, and Core Values of the Company; makes working environment enjoyable for self and others The Community Service Supervisor is required to assist in special projects or activities designated by the Company or in the absence of the Regional Service Manager. This job description should not be considered all-inclusive. It is merely a guide of expected duties. The employee understands that the job description is neither complete nor permanent and it may be modified at any time. At the request of their supervisor, an employee may be asked to perform additional duties or take on additional responsibilities without notice. Our Mission: Provide quality, safe, and affordable housing for low and moderate-income families Provide an environment for its team members to excel and be recognized and rewarded for their accomplishments Provide the Principals and Partners a fair return on their effort and investment Core Values: EXCELLENCE | INTEGRITY | RESPONSIBILITY | RESPONSIVENESS |RESPECT | CHARACTER

Job Description We are seeking a hands-on Process & General Maintenance Lead to support safe and reliable operations across our chemical and API manufacturing facility. This role combines equipment maintenance, process support, and building upkeep, ensuring the entire site operates efficiently and safely. The ideal candidate will be a practical problem solver with strong mechanical skills, basic process knowledge, and a commitment to maintaining a clean, organized, and hazard-free facility. Key Responsibilities: Safety & Compliance: • Maintain a safety-first mindset and enforce safe work practices in all maintenance and repair tasks., • Follow all OSHA, EPA, and GMP safety standards and plant procedures., • Perform and document lockout/tagout (LOTO) and hot work activities., • Identify and report potential hazards, leaks, or unsafe conditions immediately., • Support the site goal of zero accidents and zero environmental incidents. Equipment & Process Maintenance: • Perform preventive and corrective maintenance on process equipment including pumps, motors, valves, piping, mixers, and tanks., • Troubleshoot mechanical issues and perform repairs or coordinate external contractors when needed., • Support production operations by ensuring equipment reliability and readiness., • Assist with cleaning, flushing, and setup of process systems as required., • Maintain accurate maintenance logs and parts usage in SAP or the plant’s maintenance tracking system. Building & Facility Maintenance: • Perform general building maintenance and facility repair work, including painting, patching, carpentry, plumbing, and light electrical work., • Maintain facility infrastructure such as floors, walls, doors, lighting, and ventilation systems., • Ensure exterior areas, loading docks, and storage spaces are kept clean, organized, and hazard-free., • Coordinate with vendors for larger building or utility repairs when necessary., • Support emergency and weather-related maintenance as needed. Continuous Improvement & Reliability: • Identify opportunities to improve safety, equipment uptime, and maintenance efficiency., • Recommend upgrades or improvements to tools, work areas, and maintenance processes., • Maintain tools, supplies, and maintenance areas in a safe and organized condition., • Support small capital projects and process modifications. Requirements • High school diploma or GED required; technical or vocational training preferred., • 5+ years of hands-on maintenance experience in a chemical, manufacturing, or industrial setting., • Working knowledge of mechanical systems, pumps, valves, piping, and basic electrical repair., • Ability to read and interpret maintenance manuals, safety procedures, and basic schematics., • Familiarity with GMP and OSHA safety practices., • Capable of safely handling tools, ladders, and basic construction materials., • Basic computer literacy for logging maintenance data (SAP or similar system experience a plus)., • Strong attention to detail, organization, and safety awareness. Preferred Experience: • Prior work in a chemical or pharmaceutical manufacturing environment., • Basic welding, pipe fitting, or industrial painting experience., • Forklift operation or maintenance certification., • Knowledge of spill prevention and hazardous material handling. Work Environment: • Chemical/API facility with exposure to industrial equipment and materials., • Requires regular use of PPE (personal protective equipment)., • Hands-on, physical role with frequent walking, climbing, and lifting (up to 50 lbs)., • Must be comfortable working both indoors and outdoors in variable conditions. Benefits 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance

Job Description Classification: Non-Exempt We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Benefits may vary for positions covered by a collective bargaining agreement. Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job Description Location: Royal Fresh Cuts – Atlanta, GA Reports To: Maintenance Supervisor / Manager Status: Full-Time | 1st shift hours, must be able to work weekends & overtime as needed Job Summary The Maintenance Technician II is responsible for advanced troubleshooting, repair, and preventative maintenance of production equipment and facility systems in a food manufacturing environment. This role requires strong mechanical, electrical, and fabrication skills and the ability to work independently in a fast-paced operation. Key Responsibilities * Troubleshoot, repair, and maintain production equipment and facility systems * Perform preventative and predictive maintenance * Diagnose and repair hydraulic, pneumatic, and electrical systems (110V, 208V, 460V) * Rebuild motors, gearboxes, and pumps * Fabricate and repair conveyors, frames, and production components * Perform MIG, TIG, and stick welding * Repair air lines and pneumatic systems * Install and wire cameras and Redzone sensors * Read and interpret schematics, blueprints, and technical drawings * Operate forklifts, scissor lifts, and other equipment * Follow OSHA and Lockout/Tagout (LOTO) procedures * Work safely at heights over 50 feet * Maintain accurate maintenance records Qualifications * High school diploma or GED required; technical training preferred * 5 years of industrial or manufacturing maintenance experience (food manufacturing preferred) * Strong mechanical, electrical, and troubleshooting skills * Fabrication and welding experience required * Ability to work independently and in a team environment * Ability to read, write, and speak English * Willingness to work flexible shifts, including weekends and overtime Work Environment & Physical Requirements * Manufacturing environment with cold and wet conditions (35–38°ree;F) * Must wear PPE, including steel-toe shoes * Ability to stand, climb, bend, and lift up to 50 lbs Job Posted by ApplicantPro

Job Description GENERAL SUMMARY: Major and established company with a huge majority market share in what they manufacture and a good working culture has an opportunity for 2 Maintenance Technicians of which one is on the day shift and the other on the second shift with a major aspect being hydraulics, pneumatics and valves. The location is southwest suburban Atlanta, GA. There is an attractive hourly rate for this position. The day shift role is from 6:00 am to 5:00 pm Monday thru Thursday. The 2nd shift role is from 5:00 pm to 3:00 am. OT is paid at time and 1/2. There is also an attractive 401K with matching as well as major company benefits. Will be responsible for maintaining, servicing, and troubleshooting equipment and site property; making adjustments and/or mechanical/electrical repairs to the machines and equipment in a safe, efficient manner by performing the following duties: PRINCIPAL DUTIES AND RESPONSIBILITIES: (The following duties and responsibilities are all essential job functions, as defined by the ADA, except for those that begin with the word "May.") General and other duties as assigned. NEEDED FOR THESE POSITIONS IS VALVE EXPERIENCE INVOLVING HYDRAULICS AND PNEUMATICS WITH THE ABILITY TROUBLESHOOT, REPLACE AND REBUILD VALVES. There is much of this associated with the die cast production equipment in this environment. PHYSICAL REQUIREMENTS: (The following statements describe the physical abilities required to perform the essential job functions, although exceptions may be made to these requirements based on the principle of reasonable accommodation.) While performing the duties of this job, the employee is regularly required to use hands to finger, handles, or feel objects, tools, or controls and talk or hear. The employee is frequently required to stand, walk, reach with hands or arms, climb or balance, and stoop, kneel, crouch, or crawl. The employee is occasionally required to reach with hands/arms and the ability to lift up to 50 lbs. WORKING CONDITIONS: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually loud. While performing the duties of this job, the employee is frequently exposed to extreme heat. The employee occasionally works in high, precarious places and in outside weather conditions, fumes or airborne particles, toxic or caustic chemicals, risk of electrical shock, and vibration. Level I • Pneumatics: Work with pneumatics and principles of compressed air during the course of the job., • Hydraulics: Identify the basic components used in hydraulic circuits using the basic principles of hydraulics., • Pluming: Understanding the schedule rating of pipe and fittings and identifying common plumbing fittings and complete orders by name., • Pneumatics: Troubleshoot air logic systems using schematics., • Hydraulics: Explain the transmission of force and energy in a hydraulic circuit., • Plumbing related tasks to include: Layout order and install all types of plumbing systems including sweat, glued, screwed, welded connections; Interpreting isometric drawings, size pumps for proper flow and head pressure requirements; use basic plumbing codes for related tasks; Fabricate and install proper plumbing supports; and use proper electrodes to use for different welding jobs., • Electrical related tasks to include: Wire step-down transformers for all voltages; Read and write electrical schematics; Troubleshoot PLC systems using computer; Install and troubleshoot electric motors and AC/DC drives; Use electrical test equipment to take voltage and current readings and conduct ohm and meggar testing., • Pneumatics: Install air logic controls from prints or schematics., • Hydraulic: Troubleshoot hydraulic circuits containing the following components, check valves, accumulators, cylinders, flow controls, directional control valves, pressure control valves, hydraulic oil coolers and filters; Identify and explain the difference between three types of hydraulic pumps. EDUCATION/EXPERIENCE: • Level I - High school diploma or general education degree (GED), or One to two years related experience and/or training, or equivalent combination of education and experience., • Level II - High school diploma or general education degree (GED), two to four years related experience and/or training, or equivalent combination of education and experience., • Level III - Technical training certificates or Associates Degree, six to eight years related experience and/or training, or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence., • Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals., • Ability to define problems, collect data, establishes facts.

Job Description Job Summary Responsible for maintaining the general condition of the property with regards to all aspects of basic electrical, carpentry, plumbing, mechanical and painting work. Complete maintenance request work order from all departments on a timely basis. Participate in the preventive maintenance program for all-building equipment and rooms. Complete other special projects assigned periodically by the Director of Engineering. Essential Functions * Carry out all duties that are necessary in resolving reactionary activities and report the need for further maintenance and safety to the Supervisor. * Ensure the proper use of all tools in the workshop for cutting, bending and welding of equipment * Assist less skilled workers in different phases of work. * Carry out repairs on ceiling, floors and walls by combining plaster of spackle and painting. * Take out sheets and replace them with Sheetrock and finish seams. * Ensure proper repair and finishing of doors, desks, tables, chairs and other furniture in the Hotel ensure comfort of Guest and Staff. * Repair and change locks in the Hotel to ensure the safety of all. * Climb ladders to reach heights of 30’. * Changing of air filters. * Check work orders daily and complete assignments on a timely fashion in order of priority. * Ability to maintain inventories and assess needs and areas for repair. Other Duties All Engineers are required to fully comply with hotel and departmental rules, regulations and policies for the safe, secure, effective and environmentally friendly operations of the hotel facilities. Examples include, but are not limited to lost and found procedures, emergency procedures, recycling efforts, etc. Attend and participate in all hotel and/or departmental meetings, trainings sessions and other information meetings. Regular attendance in conformance with hotel standards is essential to the successful performance of this position. Comply with hotel grooming standards for both uniformed and non-uniformed engineers Comply with hotel service and behavioral standards towards our guest, vendors and fellow engineers, including, but not limited to ensuring proper phone etiquette, courteous and respectful behavior and maintaining a friendly and positive attitude. Perform all other duties as directed by management that are consistent with the policies and procedures of the hotel. Working Conditions & Physical Requirements Physical Effort: Job entails physical effort to lift up to 50lbs Physical Environment: Must be customer-service oriented and have excellent hospitality skills. Must be able to calculate basic mathematical functions. Manual Skills Significant portions of daily assignments involve application of manual skills requiring motor coordination in combination with finger dexterity, e.g., typing, handwriting, or machine operations. Work Schedule: Due to the cyclical nature of the hospitality industry, Associates may be required to work varying schedules to reflect the business needs of the hotel. Safety: Responsible for operating within hotel safety guidelines, including the safe and responsible operation of hotel equipment. Reports and addresses safety concerns as they arise. Ensures safe handling of chemicals in accordance with hotel and department standards and utilizes proper personal protective equipment (PPE) when appropriate. Qualifications Education: High school Diploma or equivalent vocational training certificate required Experience: Experience in building maintenance, electric work, plumbing and refrigeration. Prior experience within a four-star hotel brand preferred. Computer Skill & Other Technical Skills: Ability to learn and utilize computer software and hardware required. Communication: Ability to comprehend and speak English to understand and respond to information and address advanced guest requests required both verbally and in writing. Knowledge of additional language(s) preferred. Licenses or Certifications: n/a Other: Must be customer-service oriented and have excellent hospitality skills.

Job Description Role Responsibilities • Installation in the field of: Cabling and Installation of IP/CCTV cameras, Access Control Systems, • Programming to customer specification; CCTV Cameras Systems, Access Control Systems, and Vehicle Gate Systems., • Must have experience in CCTV and Access Control., • Can work well alone or on a team, • A high level of personal integrity and ethical standards, • Ability to present in a polished and professional way, • Communicate respectfully and courteously, anticipating customer needs, using best judgement when completing assigned scope, • Work multiple hours while standing and/or ascending and descending ladders, • Must be able to lift 50 pounds, • Must be comfortable working in a wide variety of environments, • Doorking, Butterfly, Keyscan, and Brivo access control systems., • Hikvision, Speco, and Hanwha camera systems., • Device commissioning and system bring-up, • Knowledge of gate systems including Doorking, Viking, Liftmaster, and All-O-Matic Pay: $21.00 - $30.00 per hour Expected hours: 40 – 50 per week Company DescriptionWe provide residents in the Southeast with security systems that fit their individual needs and recommend systems based on knowledge of the latest technology available. We offer sales and installation of remote video monitoring systems, home automation systems, gates and access systems, and more.We provide residents in the Southeast with security systems that fit their individual needs and recommend systems based on knowledge of the latest technology available.\r\n\r\nWe offer sales and installation of remote video monitoring systems, home automation systems, gates and access systems, and more.

Job Description Mullins Mechanical is a leader in Industrial and Large Commercial Mechanical, Plumbing, and HVAC construction projects. Our projects are often in the Industrial & Manufacturing environments, such as: Manufacturing Facilities, Automotive Plants, Chemical Plants, Distribution Centers, Hotels, Warehouses, and other Large Commercial Facilities. We are a self-performing specialty Contractor specializing in Design Build Applications, HVAC Systems, Plumbing, Process Piping Systems, Boiler & Chiller Systems, Equipment Installation & Rigging, Plant Relocation & Maintenance, and Metal Fabrication. We are looking for an experienced self-motivated Assistant Quality Manager - Remote to join our growing construction team. This position is responsible for the duties listed below along with related functions. The Assistant Quality Manager-Remote should be knowledgeable about quality and safety regulations and best practices within the construction environment and be able to engage and advise the job site leadership relative to Mullins mechanical quality program. Job Duties and Responsibilities: • Conduct internal audits and inspections to ensure compliance with quality management system., • Assist in the implementation of inspecting, testing, and evaluating methods of construction., • Ensure fabrication and installation efforts adhere to quality standards., • Promote a culture of continuous improvement by identifying areas of improvement and implement change., • Identify, document, and approve corrective actions for non-conforming products or processes., • Maintain clear and effective communication with internal and external parties., • Ensure customer satisfaction by addressing complaints and incorporating customer feedback into key performance indicators., • Analyze problems, identify root causes, and prevent recurrence., • Train staff on quality standards and best practices., • Create and document non-conformance reports and logs., • Assist in creating processes and procedures for quality department., • Test welders and perform weld inspections under varies welding codes., • Review client requirements and ensure specifications are met., • Follow Project Quality Assurance Plans., • Create inspection and test plans (I&TP's), • Committed to Mullins core values and safety policies. Skills/Qualifications: • Have a current AWS CWI and/or ASNT VT II and/ or API 510/570 or can obtain first year of employment., • Extensive knowledge of NDT methods (UT, MT, PT, RT)., • Understanding of the following codes: ASME, AWS, ISO, ASTM, NBIC, SMACNA, ASHRAE, IPC, NACE, AISC., • Efficient in Microsoft Excel, Word, and/ or Project management software (Procore)., • Strong verbal and written communication skills for effective collaboration., • Possess strong leadership skills to influence and motivate teams., • Experience performing quality audits on internal and external parties., • Extensive knowledge of reading and understanding construction drawings., • Excellent time management skills., • Ability to multitask with a strong understanding of core manager duties., • Ability to manage and train quality personnel., • Ability to travel for long periods of time., • Self-motivated with the drive to learn and grow., • Must be able to work in a team environment. Experience: • 5+ years in a quality leadership role, • 3+ years performing quality audits, • Experience working under a quality management system., • Experience with HVAC, plumbing, and/or process piping systems., • Extensive knowledge in Microsoft programs and construction project management software., • Extensive knowledge of various codes and standards., • Experience managing multiple projects at a corporate level. Potential Hazard: • Working outside in extreme weather conditions, • Exposure to loud noises and abnormal odors, • Confined space work, • Working in areas with overhead activities, • Working from heights using ladders, scaffolding, or aerial lifts Essential Requirements: • Comply with all company policies and procedures., • Ability to work in a fast-paced environment., • Climbing up and down stairs and ladders while working on scaffolds and in trenches to access work., • Lifting up to 50 pounds, • Walking on uneven terrain for extended periods, • Standing for extended periods, • The use of respirators if required by projects., • Driving is required to travel to and from locations., • Occasionally may need to kneel, reach, or stoop., • If driving is required, a valid driver's license and proof of insurability is required. All drivers are subject to a DMV background records search. Join Us Mullins Mechanical ranked #243 on the 2024 ENR Top Specialty Contractors list, #48 in the Nation and #5 in the Southeast among Firms in Mechanical. We're proud to be one of the fastest growing privately held companies in America. We're a self-performing specialty contractor specializing in design-build applications, HVAC systems, plumbing, process piping systems, boiler and chiller systems, equipment installation and rigging, plant relocation and maintenance, fire protection, and metal fabrication. Our projects are often in industrial and heavy commercial environments such as manufacturing facilities, automotive plants, chemical plants, distribution centers, warehouses, data centers, and other large facilities.

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. • Apprentice Level (Level I) – best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed., • Service Professional Level (Level II) – this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field., • Senior Level (Level III) – possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • Ideal candidate is a licensed electrician., • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-levelr’s., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. We thought you’d never ask. Please view our benefits page to learn more about the Benefits to all Miner employees. The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. In addition to those benefits, Service Professionals can look forward to: • Competitive pay, including quarterly bonus incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, can be taken home as well, • Autonomy and independence, • Competitive PTO and Paid Holidays Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group’s Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

At Arbon Equipment, a Rite-Hite Company, your work makes an impact. We deliver industry-leading solutions that keep workplaces safe, productive, and efficient. When you join Arbon Equipment, you're not just selling or servicing equipment - you're building trusted partnerships with customers and growing your career with a company backed by the strength of Rite-Hite's global innovation. Rite-HiteService Technicianswill install, maintain, and repair loading dock equipment and industrial doors at customer facilities. In addition, Service Technicians act as a technical resource for our customers and our sales force. This position works independently or in small teams in a field service environment, and is a primary customer contact. Rite-Hitesells the best and we hire the best. This position requires experience welding and working with mechanical, hydraulic, and electrical systems. Prior experience in the repair or installation of industrial equipment is preferred. Selected candidate must be able to work independently in a field environment. Good customer service skills are required. This position requires the ability to work outdoors, at heights, and lift up to 100 pounds. As this position requires driving a company vehicle, a pre-employment drug test and clean driving record are required, as is a DOT physical. What We Offer At Arbon Equipment - A Rite-Hite Company, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work: * Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more. * Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing. * Time for You: Paid holidays, vacation time, and personal/sick days each year. Join us and build a career where you're supported - at work and beyond. Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law. In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans. We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.

Classification: Non-Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Benefits may vary for positions covered by a collective bargaining agreement. Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers' manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Location(s): Atlanta, GA, US, 30336-1848 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 67681 SUMMARY The purpose of this job is to perform all equipment and facilities related electrical, mechanical, sheet metal, welding, instrument, and pipe fitting work. Utilizes process and maintenance knowledge to assist in the planning and performance of all tasks. Provides leadership and training for other maintenance department employees in the performance of their duties. Principal Duties and Responsibilities: • Specify, order or otherwise procure the necessary materials and equipment to be utilized on various jobs., • Participates in electrical , mechanical, PLC, computer, alignment, vibration analysis, etc. for all maintenance crafts., • Assist with training other craft employees., • Performs any type of electric arc and acetylene welding and cutting assignments using generally accepted welding and cutting procedures (includes soldering, brazing, inert gas welding, etc.), • Must be proficient in the safe use of all machine shop equipment, hand tools, power tools and precision instruments., • Perform regular fire and safety inspection and issues reports., • Circuit or logic modifications., • Transformers, medium voltage motor starters, motor control center (MCC) structures (main breaker & bus), interlocked armour cables, large circuit breakers main disconnects, furnace power regulators, furnace firing transformers, 480/277 volt lighting distribution panels, etc., • Conduit, wiring, or electrical equipment installation - (except for replacement of damaged flexible conduit and re-securing conduit mountings)., • Repair, replacement, checkout, or troubleshooting of Burner control systems including ANY system requiring flame safety supervisory controls such as asphalt booster heater, HVAC boiler, oven zone burners, incinerator burners, large Hartzell heaters., • Repair or replacement of facility lighting fixtures (in and out of doors locations), • Repair, replacement, or troubleshooting in PLCs (programmable logiccontrollers)., • Comply with safety regulations and maintain a clean and orderly work area, • Regular Attendance on site and ability to rotate to varying shifts, • All other duties as assigned or needed SKILLS AND ABILITIES The employee should hold the following abilities: • Provide verifiable and sustained authorization to work in the United States, • Basic Computer Skills, • Electrical, • Basic PLC, • Hydraulic, • Pneumatics, • Basic Blueprint & Schematic reading, • Proficient in SAP PM Module Skill: • Basic Welding, • Able to think under pressure and make quick decisions, • Ability to work well in a team or alone, • Good attention to detail COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: • Must be able to operate a computer or other keyboard instrument EDUCATION AND/OR EXPERIENCE The employee should have the following: • High School or G.E.D. equivalent, • Must be able to learn and demonstrate proficiency in the responsibilities of this position. Experience: • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints., • Basic ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Basic PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: • Able to work at elevated heights, • Able to do repetitive hand, arm, leg movements for several hours, • Ability to stand for 8 - 12 hours straight, • Able to climb and descend stairs, scaffolding, and ladders for up to 12 hours repetitively, • Lift and push and pull 40lbs. More than 50 times per day, • Must be able to squat, bend at the waist and knees freely, • Exposure to temperature extremes, • Exposure to sounds or noise levels that maybe uncomfortable, • Bending and twisting, • Handle, control or feel objects, tools or control, • Repetitive movements This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship.

Maintenance Technician performs an increasingly wider range of duties of a more complex nature over time, such as working in multiple maintenance trades such as hydraulics, plumbing, refrigeration, electrical, sheet metal fabrication, and welding. Georgia Maintenance Tech (Cold Storage Facility). As

Maintenance - comm'l heat treat.Qualifications/Experience / Skill &.Electrical knowledge, PLC & basic welding, Fabrication and troubleshooting.Ability to analyze data to confirm product specification.Ability to train others in maintenance.Outstanding communication skills, verbal and written.Great pe

Maintenance Technician III (Welder/Fabricator). The Maintenance Technician III with specialization in Welding/Fabrication plays a part in maintaining and enhancing the infrastructure at the zoo, ensuring a safe and aesthetically pleasing environment for both visitors and animals. A four-year college

Tulsa Welding School & Technology Center (TWSTC), a branch campus of Tulsa Welding School, opened and started training students in 2014. Tulsa Welding School & Technology Center (TWSTC) in Houston, Texas, which is also a branch campus of Tulsa Welding School in Tulsa, Oklahoma, started training stud

Maintenance Technician performs an increasingly wider range of duties of a more complex nature over time, such as working in multiple maintenance trades such as hydraulics, plumbing, refrigeration, electrical, sheet metal fabrication, and welding. Maintenance Technician in a manufacturing plant or s

Maintenance Technician performs an increasingly wider range of duties of a more complex nature over time, such as working in multiple maintenance trades such as hydraulics, plumbing, refrigeration, electrical, sheet metal fabrication, and welding. Maintenance Technician in a manufacturing plant or s

Job DescriptionDescription: Join our expanding team! Venturi Supply is the parent company to a national network of distributors specializing in pipe, valves, fittings, tanks, and industrial supplies, proudly serving a wide range of industries. With deep local roots and national reach through the Venturi Supply platform, our mission is to deliver the critical materials, custom solutions, and reliable service our customers depend on. At the heart of everything we do is our people. From the shop floor and counter to the job site and field, it’s our team’s expertise, commitment, and problem-solving mindset that set us apart. Their dedication fuels our service, drives our accuracy, and ensures every order is handled with care and urgency. Backed by strategically located branches, a vast inventory, in-house fabrication capabilities, and decades of real-world experience, our teams connect infrastructure and industry to the essential resources they need to operate safely, efficiently, and successfully. We’re more than a distributor—we’re a trusted partner built on strong relationships, operational know-how, and a relentless focus on customer success. Role Overview The Fabrication Supervisor supervises a team of welders and fabricators who work on the necessary component parts of a piping fabrication that supports the organization’s production goals and objectives while meeting and/or exceeding customer expectations. Responsibilities · Directs entire fabrication production workflow and maintains fabrication worker schedules and coverage. · Reads and oversees interpretations of blueprints and drawings to build designed fabrications. · Demonstrates understanding of core welding technologies and educates team. · Enforces established safety guidelines, promotes a safe workplace, and performs weekly safety meetings. · Identifies, documents, and implements opportunities for continuous improvement. · Maintains a working knowledge of all operating systems pertaining to the work area. · Performs additional duties as assigned or required. Lead Responsibilities · Leading and motivating the team to achieve performance goals. · Setting clear objectives and expectations for team members. · Providing coaching, support, and feedback to enhance team performance. · Ensuring projects are completed on time and within budget. · Acting as a liaison between upper management and staff. · Analyzing performance metrics and identifying areas for improvement. · Implementing strategic initiatives to achieve organizational goals. · Machine maintenance and repair. · Addresses personnel issues with management and fosters a positive work environment. Requirements: • High School Diploma or GED Required, College Degree preferred., • Previous Forklift certification preferred., • Certified in GMAW or FCAW ASME IX required. GTAW ASME IX preferred., • 3 or more years of fabrication supervision experience in the same or similar industry required., • 1 or more years successfully supervising a team of 5 to 15 employees., • Computer literate; Proficient with MS Office 365., • Ability to effectively communicate [written and verbal]., • Thrives in a collaborative team environment., • Detailed oriented work style comfortable with multiple priorities being juggled while maintaining a consistent work approach., • Physical requirements: Lift/push/pull 50 lbs., bend twist, stand for extended periods of time. Climb and reach for items, use overhead crane, forklift, and endure frequent exposure to outside weather conditions. We're dedicated to our employees' and their families' health and well-being. • Two medical plans, including HSA-qualified, with virtual care., • Dental and vision coverage, including kids' orthodontia., • HRA reimbursement eligibility., • Enjoy 10 paid holidays and accrue PTO from your first day., • Access a robust Employee Assistance Program (EAP) with 24/7 support for you and your family., • Join a team that values integrity and innovation., • Grow as a leader in industrial distribution with cutting-edge automation and supply chain solutions.

Job DescriptionLead Reliability for a High-Output Concrete Operation Picture your morning: you scan the day’s production schedule and BOMs, confirm product specs, quantities, and delivery dates, then set priorities for the maintenance and support teams that keep a concrete manufacturing line running smoothly. You coordinate people and plans, align maintenance windows with production goals, and ensure quality never slips. What You’ll Do In this role, you will direct and coordinate maintenance and support functions that underpin material processing and product manufacturing. You’ll work hands-on when needed and through subordinate supervisors to keep operations on track. • Translate production orders and BOMs into actionable maintenance and support plans that meet product specifications and delivery commitments., • Establish priorities and sequences for maintenance activities to minimize downtime and optimize throughput., • Build and manage operational schedules; coordinate closely with production to safeguard product quality and schedule adherence., • Analyze production and operating reports; troubleshoot operational, manufacturing, and maintenance issues to control costs and prevent delays., • Set performance targets and drive asset utilization to achieve specific operational outcomes., • Create and refine standard operating procedures and working practices; observe work and coach teams to ensure strict compliance., • Address employee concerns; resolve grievances when possible or escalate unresolved matters to the Production Superintendent., • Jump in as needed—apply working knowledge of carpentry, warehouse operations, metal fabrication, welding, and equipment operation.What You Bring, • Education: High school diploma; vocational or technical education preferred., • Experience: 5–7+ years of related industrial maintenance/manufacturing experience required., • Leadership: 3–5+ years in a similar supervisory capacity preferred.Technical Mastery, • Mechanical and electrical troubleshooting, • Pneumatics systems diagnosis, • Powerhouse and boiler troubleshooting, • Maintenance and repair across heavy industrial assets, • Lift truck (forklift) repair and maintenance, • CNC machine setup and changeover, • Machine safety inspections and complianceWork Environment & Travel, • Expect daily exposure to outdoor weather and moving mechanical parts; occasional wet/humid conditions and vibration; loud noise levels are typical.

Job Description Job Summary: PNODE is seeking a dedicated and skilled Substation Construction Journeyman to join our T&D Substation Services team. This team member will travel across the state to ensure the safe and proper installation, inspection, and repair of new and existing electrical equipment, as well as related construction activities. The journeyman should have experience and technical knowledge in the electric utility sector. Personal and public safety are of utmost importance, as this work will be performed at various locations throughout the state of Georgia. Responsibilities: Welding and custom fabrication for substation, generation stations, and high - voltage infrastructure. Expertise with schedule 40 and 80 aluminum tube buss and flat bar, angle aluminum jumpers. § Perform/Manage electrical installation, alteration, repair, troubleshooting and inspection of electric power transmission & distribution systems. § Installation of new substation equipment as well as maintaining power transformers. § Ability to stand and walk for majority of 10 to 12 hours a day, climb ladders +/- 20 feet above ground, bend, lift product, equipment and tools up to 80 pounds throughout the day. § Must be able to understand and complete the required documentation and paperwork. § Work with high voltage systems up to 500KV as necessary to improve functionality or comply with updated codes. § Must be able to travel across the state to various job sites as required. § Must be able to transport tools, materials, equipment, and supplies to the work site. § Locate and validate work zones using GIS, survey reports, and internal system data. § Interpret blueprints, below-grade surveys, and staking sheets to execute tasks with precision. § Follow safety protocols, participate in job briefings, conduct job hazard assessments and adapt work based on the weather and terrain conditions. § Operate tools and equipment under supervision, including bucket trucks and testing devices. § Maintain tools, vehicles, and work areas in clean and safe conditions. § Participate in training programs and complete coursework as required for advancement. § Ensure strict compliance with OSHA, FCC, NEC/NESC, roadside safety guidelines, and environmental regulations. Requirements: Must have certificate and aluminum welding § High School Diploma or GED (General Educational Development). § Valid State license that allows you to practice as a journeyman electrician. § Completion of relevant Apprentice Program, or experience as an Apprentice/Journeymen Electrician. § Extensive knowledge of electrical hand tools and all required equipment operations. § Physical capability to lift and handle materials weighing up to 80 pounds safely. § Ability to work in confined spaces, such as manholes and pull boxes. § Able to work at heights up to 60 feet, climb ladders, work off platforms and be able to work in all weather conditions. § Strong communication, interpersonal, organizational and time management skills. § Excellent problem-solving capabilities and the ability to work independently. § Coordinate with other trades at project sites to support construction activities. § Should have a valid driver’s license; CDL is preferred (without restrictions). Company DescriptionClean MVR Clean backgroundClean MVR\r\nClean background

Job Description Position: Community Service Supervisor: Reports to Community Manager and Regional Service Manager: POSITION SUMMARY: The Community Service Supervisor performs general and/or specialized maintenance and repairs, applies proficient skills in several maintenance trade disciplines, supervises a team of maintenance technicians and assistants, manages a budget for the most cost effect practices, and provides supervision, training, and development for assigned associates. In addition, and along with the Community Manager, the Community Service Supervisor is responsible for overseeing the physical property, general maintenance, repairs, unit make-readies, preventative maintenance, and construction or rehabilitation projects for the apartment community. JOB SPECIFIC COMPETENCIES: • Provides service to residents in a prompt, courteous, and professional manner., • Establishes emergency maintenance on-call and daily work schedules for maintenance staff and meets with the Community Manager daily to report on the status of all scheduled work orders., • Follows up on work assignments for efficiency and thorough completion., • Instructs staff on and enforces work policies and procedures, safety procedures, and the use and maintenance of equipment and maintains on-site safety binder., • Makes regular inspections of the community, notifies management of problems and recommends solutions., • Can identify and correct hazardous property conditions that could place the property in a liable position., • Utilizes a preventative maintenance program to minimize the cost of maintenance and downtime of equipment and units by maintaining an adequate inventory of all parts, tools, and equipment., • Obtains competitive pricing on purchases maintains control through purchase orders, oversees contract labor, and orders materials as needed and approved by the Community Manager., • Assists Community Manager in preparation of annual budget to maximize income, control expenditures and maintain financial objectives to meet pre-determined budgetary goals. POSITION QUALIFICATIONS: Education: • High School Graduate or General Education Degree (GED) for consideration., • HVAC/Freon Recovery Certification., • CPO (Certified Pool Operator) and EPA Universal certificates preferred., • Minimum of three (3) years related experience., • Completion of in-house training within the first 90 days of employment., • Must have own tools., • Must maintain a reliable vehicle., • Enjoy the work that they do demonstrate a pleasant demeanor on the job and show a desire for success., • Exhibits behavior that is consistent with the Vision, Mission, and Core Values of the Company; makes working environment enjoyable for self and others. This job description should not be considered all-inclusive. It is merely a guide of expected job duties and responsibilities. The duties and responsibilities described are not permanent and may be modified an any time. At the request of management, an employee may be asked to perform additional duties within the scope of our work with little to no advance notice. Our Mission: To provide quality affordable housing for low and moderate-income families. To provide an environment for its team members to excel and be recognized and rewarded for their accomplishments. To provide the principals and partners a fair return on their effort and investments. Core Values: EXCELLENCE | INTEGRITY | RESPONSIBILITY | RESPONSIVENESS |RESPECT | CHARACTER

Job Description McKenney’s is the Southeast’s most trusted name in facility construction, operation and maintenance. For over 75 years, our proven approach has ensured high-quality, energy-efficient solutions at every stage of a building—Design, Build, Controls & Monitoring, and Maintenance & Repair. We offer expertise in HVAC, process piping, plumbing, and building automation and control systems, as well as service and maintenance. We have our own in-house engineering, fabrication, installation and commissioning resources to ensure cost-effective delivery of the highest quality solutions. In this role, you will help the entire safety team to be responsible for project safety accountability programs, accident, and fire protection programs, and maintaining full compliance with company, client, and state/federal safety regulations. DUTIES & ESSENTIAL JOB FUNCTIONS • Participate in daily flex and stretch, • Attend GC daily Safety Huddle, • Promptly respond to GC Safety requests, • Engage with the Field personnel to provide solutions that enhance safety, • Work with the Safety Manager to align and execute McKenney’s safety strategy, • Perform multiple construction site walks daily. Work with crew foreman to evaluate ongoing work activities to ensure the safety of the crews performing the tasks., • Participate in daily pre-task planning sessions in the work area to help identify risks and make sure there is alignment from every member of the crew., • Generate reports through observations or other formats as determined by the onsite Safety team leader including specific violations and potential at-risk behaviors. Review reports with Safety onsite team leader and/or Sr. Safety Manager., • Work with an onsite Safety team leader, project team, and Sr. Safety Manager to pre-determine needs for the job and workers before the job starts through Job Safety Analysis. Address needs for required certifications, project site orientation, safety training, or standards review to avoid delay, and or violations after the job start., • Handle daily and weekly customer-required safety administration (i.e., permits Pre-Task Plans, etc.,)., • Address and see through to completion emerging safety issues as identified by McKenney's team members, client partners, and building owners., • Inspect mobile equipment for proper material handling and transporting as well as operational items related to safety (i.e., tires, lights, and signage)., • Perform equipment and tool inspections, • Ensure all pre-shift inspections are completed and documented, as needed., • Partner with the project team and Foremen to coordinate all equipment/tool follow-up procedures to correct out-of-service items., • Report to the incident scene promptly and contain area and ensure appropriate medical attention is provided and the scene is secured to prevent further injury or damage., • Partner with the onsite Safety team leader and Sr. Safety Manager to coordinate and complete the process of completing the Incident Report to McKenney’s Safety and HR, • Work with the onsite Safety team leader and Sr. Safety Manager to complete a Root Cause Analysis (RCA) using McKenney’s model to identify key contributing factors to help prevent a recurrence., • The process may include personnel interviews, pictures, safety procedure adherence, and incident re-enactment., • Implement re-training of employees related to the incident as required., • Perform action steps to be noted and administered for future prevention., • Must have at least 3 years of field safety experience with demonstrable efforts in project safety efforts, • Minimum OSHA 500, • Basic understanding of construction OSHA (federal or state, as appropriate based on location) and willingness to uphold McKenney’s safety expectations, • Recognize hazardous situations and recommend corrective measures., • Strong technical skills related to construction safety, • Good interpersonal communication skills., • Self-motivation, • Strong organizational skills, • Must possess and maintain an exceptional work ethic as well as uphold company values and demand the highest standard of conduct from self and others., • Must project a professional and polished image that inspires confidence and trust., • Work involves moderate exposure to elements, such as hot/cold temperatures, dirt, dust, and/or loud noises., • The work environment involves some exposure to construction-related hazards or physical risks, which require following basic safety precautions., • Light physical effort. Requires handling of average-weight objects up to 25 pounds and some standing or walking. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR cqgDVS8x51

Job Description The GEMÜ Group is a global leader in the manufacturing of valves and control systems, with over 50 years of innovation and quality. As a privately-owned company, GEMÜ is known for combining advanced technology with strong traditions. With more than 2,400 employees worldwide, we are growing fast—and we’re looking for great people to grow with us. We are currently hiring a TIG Welder for our manufacturing team in Atlanta, Georgia. We’re looking for someone experienced in welding, especially TIG, who takes pride in precision and quality. This role is hands-on and plays a key part in producing high-quality metal components. Key Responsibilities * Weld stainless steel and other metals using TIG techniques to meet quality standards. * Prepare materials and set up equipment for each job. * Inspect welds for accuracy, cleanliness, and strength. * Read blueprints and follow welding symbols. * Follow all safety rules and use required protective equipment. * Keep welding tools and equipment in good working condition. * Work with the production team to meet deadlines and improve workflows. * Suggest improvements to make processes more efficient. * Help test new welding methods when needed. * Perform other duties as assigned. Knowledge & Skills * Strong attention to detail and accuracy in welding. * Problem-solving skills for welding issues. * Ability to work well with others in a team. * Willingness to learn and adapt to changes. * Good communication with team leads and coworkers. * Able to read ASME welding procedures and blueprints. * Comfortable using hand tools and shop equipment safely. * Basic computer skills. Qualifications * High school diploma or equivalent; trade school or apprenticeship preferred. * 3+ years of TIG welding experience, preferably in manufacturing. * Able to read blueprints and use various welding methods (TIG, MIG, Stick). * Welding certification is a plus but not required. * Physically able to stand, lift, and work in factory conditions. * Must be able to handle equipment safely. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Job Summary: We are seeking skilled Tube Welders for a traveling position focused on repairing industrial ductwork systems. This role involves precision welding to repair holes, cracks, and structural deficiencies using the TIG welding process. Candidates must be dependable, safety-focused, and comfortable working in various job site environments across multiple locations. Key Responsibilities: • Perform TIG welding on structural ductwork to repair holes, cracks, and damaged sections, • Inspect duct systems to identify repair needs and ensure structural integrity, • Prepare surfaces and materials for welding (cleaning, grinding, fitting, etc.), • Follow all safety procedures and job site regulations, • Work efficiently in industrial and commercial environments, • Maintain welding equipment and tools in proper working condition, • Proven experience with TIG welding, preferably in structural or ductwork applications, • Ability to pass a drug screening, • Ability to pass a TIG weld test, • Willingness and ability to travel, • Strong attention to detail and workmanship quality, • Ability to work independently and as part of a team, • $200/day per diem (travel days included where applicable), • $1,8000 travel bonus ($900 the beginning and $900 end of each project), • Competitive hourly pay (based on experience), • Opportunity for consistent, project-based workCompany DescriptionFounded with a commitment to excellence, Trade Pro, Inc. is a premier staffing solutions provider specializing in the commercial construction industry. We connect skilled tradespeople—sheet metal mechanics, electricians, plumbers, pipefitters, and more—with leading contractors and developers to bring ambitious projects to life.Founded with a commitment to excellence, Trade Pro, Inc. is a premier staffing solutions provider specializing in the commercial construction industry. We connect skilled tradespeople—sheet metal mechanics, electricians, plumbers, pipefitters, and more—with leading contractors and developers to bring ambitious projects to life.

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As a Heavy Duty Diesel Truck Technician, you will be diagnosing, troubleshooting and repairing diesel engines and components on all makes and models of on-highway diesel trucks and buses. Primary Responsibilities: • Inspect, diagnose, troubleshoot and locate mechanical deficiencies on buses and on-highway diesel truck engines and components., • Repair and/or replace all components of diesel engines, hydraulic systems, air conditioning systems, suspension systems, drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Determine extent of necessary repairs including identifying major power-train overhaul needs and prepare orders for required services., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all documentation (work orders, parts orders, inspections, warranty support, comments and time sheets) in a legible, accurate and timely manner., • Perform all work in accordance with established time, quality standards and safety procedures.Additional Responsibilities:, • Participate in required safety program, and work in a safe manner., • High school diploma or equivalent preferred.Required Qualifications/Skills:, • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep required records., • Ability to read, analyzes, and interpret technical information- schematics, technical manuals, technical drawings, technical procedures, and governmental regulations, • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Skilled in ‘Basic’ computer applications including email and internet usage., • The ability to communicate through email- sending & receiving notes, attachments., • Ability to read, analyzes, and communicate technical information., • Ability to write service reports that effectively communicate required information in an understandable (clear and concise) and useable method., • Ability to ask and properly respond to questions from customers and supervisors. Preferred Qualifications/Skills:, • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Competitive Pay, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities

Job Description We are hiring experienced MIG Table Welders for full‐time positions. These roles require strong welding skills, the ability to work in a fast‐paced production environment, and the physical capability to lift and stand for extended periods. Open Positions (2) Day Shift Table Welders – Pay: $18.00/hr Hours: Mon–Thurs, 6:00 AM–4:30 PM (Fridays optional) Night Shift Table Welder – Pay: $18.50/hr Hours: Mon–Thurs, 3:00 PM–3:30 AM (Fridays optional) Job Responsibilities • Perform MIG welding on various parts and components, • Operate table welding equipment safely and efficiently, • Follow production requirements and meet daily output goals, • Inspect welds for quality and accuracy, • Maintain a clean and safe work area, • Experienced MIG and table welder (required), • Ability to lift up to 75 lbs repeatedly, • Ability to stand 10+ hours per day, • Must be reliable and able to work full scheduled shifts, • Welding Helmet Office contact info:(404)-688-7168

Job Description Job Summary Skilled Trades Specialists is seeking a highly motivated and experienced Director of Training to lead a Welding Training Program, overseeing instruction and operational efficiency. This role requires expertise in multiple welding processes and the ability to manage a team of up to 20 professionals, including instructors and support staff. The ideal candidate will ensure high-quality training, foster a culture of safety, and prepare students for successful careers in welding. Key Responsibilities Program Leadership & Management • Oversee welding training programs covering multiple welding processes (MIG, TIG, Stick, Flux-Cored, etc.)., • Manage and mentor a team of up to 20 instructors and support staff, ensuring cohesive teamwork and efficient operations., • Monitor and evaluate program effectiveness, making improvements as needed to align with industry standards and workforce demands., • Maintain compliance with safety regulations, accreditation requirements, and industry best practices., • Maintain a comprehensive curriculum that covers theoretical and hands-on welding techniques. The Curriculum is in place and the program is proven., • Ensure training materials and instructional methods align with industry certifications and employer expectations., • Promote and enforce strict safety guidelines and best practices throughout all welding activities., • Ensure compliance with OSHA and other regulatory standards related to welding operations and training environments., • Manage program budgets, resources, and procurement of training equipment and materials., • Minimum of 5 years of welding experience required., • Proven experience in welding training, program management, or related leadership roles., • Expertise in multiple welding processes is a plus., • Strong leadership and organizational skills to effectively manage teams and program operations., • Knowledge of welding safety standards, compliance requirements, and instructional methodologies., • Excellent communication, problem-solving, and interpersonal skills., • Minimum of 5 years of welding experience in a professional setting. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Referral program, • Relocation assistance, • Tuition reimbursement, • Vision insurance

Job Description Overview Tradesmen International is immediately hiring experienced Welders for projects located in or around Milwaukee, WI. This is a first shift opportunity and the pay rate is up to $24/hour based on experience plus $100/day per diem for Travelers 60+ miles from the job site. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • MIG welding, • Welding Ibeams, frames & fuel tanks in flat/overhead positions, • Welding sheet metal from 10 gauge up to 1 inch, • Clamp, hold, tack-weld, grind or bolt component parts, • Weld, position & secure work pieces using hoist cranes, wire & banding machines or hand-tools, • Inspect products/equipment for defects/malfunctions Requirements: • Must pass various weld test, competency test, math test, drug screen and physical, • Must be able to run one bead over side without stopping, • Must be able to read measuring devices, • Must have GMAW, MIG/MAG experience Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job DescriptionCompany Description About Veolia North America Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Performs a variety of semi-skilled, skilled, technical, and administrative work in the planning, scheduling, maintenance of vehicles and equipment within Fleet Services. Primary Duties/Responsibilities: • Diagnoses and locates mechanical problems on fleet vehicles and equipment., • Repairs brakes, engines, electrical, fuel, hydraulic, transmission, ignition, air, exhaust, axle assemblies and related systems using a variety of hand, electric, air-driven tools, and diagnostic instruments., • Performs cutting and welding in performance of body repair, touch up and related work., • Performs routine and preventative maintenance, lubrication and minor adjustments on vehicles and related equipment. Promptly reports any operational problems with machines or equipment to Lead or Supervisor., • Inspects vehicles and equipment for compliance with applicable policies, rules and regulations for road-worthiness and safety. Takes corrective action per procedure in assigned area. Investigates vehicle / equipment damage, completes forms, participates and completes remedial actions to prevent further occurrences within assigned deadlines., • Performs all duties in compliance with Veolia Water safety policies and guidelines and makes others aware of potential hazards in the work area. Practices good housekeeping. Participates in cleaning of work areas machinery, tools and equipment in Fleet Services areas., • Frequent contact with internal personnel in order to understand maintenance needs., • May assist with maintaining parts, spares and maintenance inventory., • Participates in coverage for after hour’s emergency calls for Fleet Services as assigned by Lead Mechanic., • Participates in snow and ice control program with the Public Works Department as needed on an emergency basis., • Performs other duties as assigned., • Spends 100% of time in shop or field environment., • Typically spends 25 – 35% of time exposed to outdoor and sometimes inclement weather., • Company service vehicles are used as required., • Travels 1 – 2 times per year for company provided training., • Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, moving mechanical parts and vehicles, heavy machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.Qualifications Education/Experience/Background: • High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions., • Specialized training in vehicle and equipment maintenance with knowledge and experience in the areas of automotive and truck mechanics, gas and diesel engines, transmissions, hydraulics, valves, generators and welding and body repair., • Ability to perform basic mathematical calculations., • Must demonstrate ability to accurately record data from meters, gauges, scales, panels, computer consoles and other equipment., • Must have ability to safely operate motorized vehicles and construction-type equipment, drill press, bench press, grinder, band saw, electric charging systems testers, digital and computerized diagnostic instruments, hydraulic jacks and lifts, air tools, wrenches, drivers, wheel and tire replacement systems, air compressor, lubricants, greases, coolants and related fluid, cleaning equipment, portable radios, telephones, computers, copiers, printers and other equipment and devices related to Fleet Services activities., • Good verbal and written communication skills are necessary., • Must have ability to operate Computer Maintenance Management System (software)., • Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily., • Must demonstrate proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc., • Must provide own hand tools used in the normal performance of the job and includes, but not limited to; wrenches, socket sets, drivers, hammers, chisels, storage cabinets and tool boxes. Replacement of hand tools due to damage or breakage in the normal performance of the job will be reimbursed after approval by the Plant Manager., • Must possess a valid Class “A” Commercial Driver’s License (CDL), with tanker endorsement and a safe driving record., • Employee Orientation, Departmental Operating Procedures, OSHA and Quality Training. Veolia equipment training., • Contributes and participates in required and recommended safety programs and training sessions., • Obtain and continue ASE certification in Master Automotive Technician or Master Medium / Heavy Duty Truck Technician within three years from date of hire., • HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification. Work toward higher level water / wastewater treatment certification., • Amount of time spent – Standing 75%, Walking 25%., • Requires close visual and hearing observation to detect non-conformance and equipment malfunction., • Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms., • Works in various positions; works on ladders, and works with hands extended above and below head and body up to 40 minutes using hand and power tools weighing up to 15 pounds., • Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet, • Occasional stooping, bending or kneeling and entering confined spaces. Additional Information Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.