Welding jobs in Savannah, GeorgiaCreate job alerts

Job Description Ironworker / Welder – Savannah, Georgia Pay Rate: $28–$32 per hour (DOE) Per Diem: $90/day (days worked only — must meet eligibility requirements) Hours: 45–55 hours per week Position Overview: We are seeking an experienced Ironworker/Welder to join our team in Savannah, GA. This role involves erecting, aligning, welding, and securing structural steel components for industrial and commercial projects. The ideal candidate will have strong rigging, welding, and fabrication skills, the ability to work at heights, and a commitment to safety and quality workmanship. This is a full-time opportunity with consistent hours and competitive pay. Job Responsibilities: • Set up hoisting equipment, rigging, and lifting of structural steel members., • Fasten steel members to hoist cables using chains, cables, or ropes., • Signal equipment operators to safely lift and position steel members., • Use tag lines to guide steel into proper alignment., • Align and secure members using turnbuckles, crowbars, jacks, and hand tools., • Align bolt holes and temporarily bolt or weld members in place., • Verify vertical/horizontal alignment using plumb bobs and levels., • Cut and weld steel members using oxyacetylene and welding equipment., • Load, transport, and unload tools, materials, and supplies., • Assist with lifting, positioning, and securing materials during installation., • Perform minor tool and equipment maintenance and cleaning., • Follow all site safety rules and wear required PPE., • Ability to work with accuracy and within strict tolerances., • Ability to apply shop math to layout and fabrication tasks., • Strong planning skills and proper tool selection for each task., • Ability to identify differences in size, shape, and form of structural components., • Previous structural steel, ironwork, or welding experience preferred., • Must have tools of the trade and reliable transportation., • Must comply with all safety standards and company policies., • Must meet per diem eligibility requirements., • Must pass pre-employment drug screening., • Location: Savannah, GA, • Pay: $28–$32/hour + $90/day per diem (days worked only; must meet eligibility requirements), • Schedule: 45–55 hours per week

Job Description The Boilermaker/Welder will be responsible for performing welding, code repairs, fabrication, pipe fitting, and various mechanical tasks related to boilers. This role requires expertise in boiler re-tubing, installation of boiler equipment, and ensuring compliance with ASME and NBIC codes. The selected candidate will work closely with our service team and engineering department to provide top-notch service to our valued customers. ESSENTIAL DUTIES & RESPONSIBILITIES include the following: • Conduct welding and fit-up tasks, including TIG, MIG and Stick, • Perform oxygen cutting (acetylene), brazing of copper piping, and pipe fitting and plumbing as required, • Prepare boilers for inspection and carry out mechanical installations of boilers and related equipment, • Safely remove and replace tubes on boilers, ensuring accurate refractory repair and installation, • Collaborate with the Quality Control Manager and Service Coordinator to complete assigned duties, • Keep records and prepare service reports, ensuring compliance with company policies and procedures, • Participate in factory training for boiler pressure vessel welders and stay updated on ASME Code repairs and welding procedures, • Troubleshoot boilers, pumps, and auxiliary equipment, identifying and addressing potential issues, • Collaborate with the sales team to package service contracts with our boiler product lines, • Ensure all tasks are completed within standard time and in adherence to safety requirements, • Maintain good communication skills and work effectively in a team atmosphere, • Comply with ASME and NBIC standards in performing repairs on boilers and pressure vessels, • Provide support for ASME boiler code application, assisting in proper equipment repair, operation, and selection, • Display a customer-centric approach, solving customer problems and ensuring customer satisfaction, • Continuously seek opportunities for learning and expanding knowledge in relevant areas, • Welders to successfully pass welding tests/certifications under Icon Boiler's code program, • Ensure compliance with federal, state, and local laws, legal regulations, and recommended best practices, • Collaborate with all Associates to uphold the company's mission and values, • Occasional travel as required, • High school diploma or general education degree (GED) or equivalent, • 5+ years of relevant experience in boiler service, repair, and/or mechanical operations, • Certified in the 6G welding position (ASME certification desirable but not required), • Ability to read and understand mechanical drawings and blueprints, • Basic computer skills, • Strong reasoning, problem-solving, and mathematical skills, • Detail-oriented and organized, with excellent paperwork management, • Empathetic and customer-focused, willing to go the extra mile to solve customer issues, • Ability to work in varying temperatures and physically demanding environments, • Strong communication and team-building skills, • Ability to pass drug screening, • Ability to prove US employment eligibility The physical demands and environmental exposure described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodation may be made for individuals with disabilities to perform the essential functions. The physical demands of the position include: • Regular foot use required; frequent sitting, standing, walking, stooping, kneeling, squatting, reaching, and keyboarding required; occasional climbing, crawling, pushing, pulling, and gripping required., • Material handling demands include lifting from floor level to overhead, with regular lifting up to 25 pounds and occasional lifting up to 100 pounds or more., • Vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Job DescriptionGrayWolf is seeking Combo Pipe Welders in Savannah, GA GrayWolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating a culture of Safety, Quality and Performance to deliver the best completed projects to our customers. SUMMARY: Lay out, position, align, and secure parts and assemblies prior to assembly, Weld together metal components of products such as piping systems, plates, pipes, and tube or structural shapes, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment. Plan installation or repair to avoid obstructions and avoid interfering with the activities of other workers. Secure pipes to structure with bracket, clamps, and hangers, using hand tools and power tools. Weld in any direction – flat, horizontal, vertical, or overhead positions ESSENTIAL DUTIES: • Must be able to read and interpret prints and plans, • Must be able to weld both carbon steel and stainless steel pipe, • 3 tests., • 6010/7018 2” monster, • 2” std wall tig out, • 3-5 years proven experience, • OSHA 10 preferred , AWS certified preferred, • High School Diploma / GED, • Must have locking tool box and tools necessary to perform the job., • Must be able to successfully complete all required pre-hire requirements. Physical/Site Requirements: • Lift and carry heavy items weighing up to 45 pounds., • Move in and around confined and cluttered places, and uneven areas. Full range of motion and flexibility consistent with age., • Work up to a 12-hour shift in varying temperature extremes and other outside conditions., • Climb and maintain balance on steel framework, stairs, ladders, and scaffolds., • PPE footwear/prescription safety glasses or eye shields required. This job site requires long sleeves Graywolf Integrated Construction Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

General Summary: As a Facilities Maintenance Technician 2, you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive timelines. You will collaborate with Maintenance Technician and managers to perform Root Cause Analysis for equipment failures. A successful candidate in this role will: Essential Job Functions: 1. Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS), 2. Adjust scanners, cameras, field buses, scales and printer applicators, 3. Reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys), 4. Clean, lubricate, and calibrate equipment, 5. Use appropriate job plans, procedures, and manuals, 6. Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc., 7. Assist with basic electronics/ Programmable Logic Controls troubleshooting, 8. Conduct maintenance and basic troubleshooting of all types of industrial robots, 9. Utilize handheld devices and asset management system to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used), 10. Develop and maintain positive working relationships across all levels of the organization, 11. Follow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazards, 12. Develops knowledge base of different systems within the Distribution Center., 13. Maintains an organized work area and promotes a safe working environment with the Maintenance department., 14. Communicate with (or to) individuals or groups verbally and/or in writing (e.g. customers, suppliers, associates) to minimize downtime of equipment., 15. Operate material handling equipment, battery equipment, moving machinery, and other powered equipment. Qualifications/Basic Job Requirements: • 2 to 3 years of practical experience as a maintenance technician, mechanic or equivalent., • 3 years of troubleshooting and repair experience, • 2 years of experience specializing in preventative maintenance and process improvement., • PC competency and ability to use mobile apps on handheld devices, • Familiar with wiring diagrams, symbols and electrical measuring, • Experience in the following areas: o Work order management o Preventive/predictive maintenance procedures o Basic blueprint and schematic reading o Electrical and electronic principles o Basic metal fabrication and welding o Industrial Controls and Electronics • Ability to troubleshoot basic Input/Output function Preferred Qualifications: • Degree from a vocational school or college with a focus in the Mechanical or Electrical field, • 2+ years apprenticeship or equivalent experience in the Mechanical or Electrical field, • Experience with automated conveyor systems and controls, • Experience with Material Handling Equipment (MHE) safety standards, • Experience with robotic operation/ maintenance Certifications and Training • MSSC.gov Certified Logistic Technician Certification, • Progressive knowledge in fields electrical, mechanical, and / or HVAC systems., • Equipment-Specific Training, • Progressive knowledge in industrial equipment or machinery used in a particular industry., • Ability to obtain a certification on all MHE. Physical Requirements: These are physical and mental requirements of the position as it is typically performed. Inability to meet one or more of these physical or mental requirements will not automatically disqualify a candidate or employee from the position. Upon request for a reasonable accommodation, the Company may be able to adjust or excuse one or more of these requirements, depending on the requirement, the essential functions to which it relates, and the proposed accommodation. Technical Skills of the job: • Mechanical Skills: Understanding of mechanical systems, tools, and machinery. Ability to troubleshoot, repair, and maintain mechanical components. • Electrical Knowledge: Familiarity with electrical systems, wiring, and circuits. Ability to read schematics and troubleshoot electrical issues. • PLC: Basic Understanding the function of programmable logic controllers (PLCs), which are crucial for automation and process control in industrial settings. • Hydraulics and Pneumatics: Understanding of hydraulic and pneumatic systems, including the ability to diagnose and repair issues. Ability to read schematics and troubleshoot issues. • Welding and Fabrication: Basic skills in welding, soldering, and metal fabrication are required for repairs and building structures. • HVAC and Refrigeration: Progressive knowledge of heating, ventilation, and air conditioning systems., • Machine Calibration and Testing: Ability to calibrate machines and perform diagnostic tests to ensure optimal performance with minimal assistance. • Battery Functions and operations. Understanding of battery usage and proper maintenance of the site’s battery program. • Rolling stock. Understanding the basics to repair and troubleshoot rolling stock., • Computer Literacy: Familiarity with computer systems for managing equipment maintenance logs, CMMS, diagnostics, and interfacing with automation systems. Safety and Compliance: • Lockout/Tagout Procedures: Mastery of lockout/tagout (LOTO) procedures to safely work on electrical or mechanical equipment. Soft Skills: • Problem-Solving Skills: Ability to think critically and solve complex issues quickly and efficiently., • Communication: Clear communication with team members, supervisors, technical vendors, and other departments to convey issues, solutions, and updates. • Teamwork: Ability to work in teams, especially in collaborative maintenance or installation projects., • Time Management: Efficiently managing time and prioritizing tasks, especially during equipment breakdowns or preventive maintenance schedules. • Adaptability and Flexibility: Willingness to train or be trained Soft Skills: • Problem-Solving Skills: Ability to think critically and solve complex issues quickly and efficiently., • Communication: Clear communication with team members, supervisors, technical vendors, and other departments to convey issues, solutions, and updates. • Teamwork: Ability to work in teams, especially in collaborative maintenance or installation projects., • Time Management: Efficiently managing time and prioritizing tasks, especially during equipment breakdowns or preventive maintenance schedules. • Adaptability and Flexibility: Willingness to train or be trained on new technologies and adapt to changing environments, especially in fast-paced industrial settings. Full time 151 Cross Roads Parkway,Savannah,Georgia 31407 DC5 Dollar Tree

Job Description Maximize customer satisfaction by assisting Lead Technician in performing repair, maintenance work, and installation of various equipment primarily dock doors and levelers. Conduct themselves in a polite and professional manner and conduct work with an excellence and efficiency that will contribute to the reputation, growth and profit of Lift Power, Inc. Primary Duties and Responsibilities: • Assist Lead Technician in analyzing customer equipment and perform service, maintenance, and installation tasks as necessary, • Communicate any issues with Lead Technician while on jobsite., • Assist Lead Technician in efficiently performing scheduled maintenance, • Follow all scheduled maintenance procedures and policies as dictated by the company, • Accurately and neatly complete and submit time cards daily in a timely fashion, • Follow all safety procedures of both Lift Power and the customer when working on a job site, • Use appropriate PPE, • Dispose of waste properly, • Leave jobsites in orderly condition, • Attend all training meetings and seminars provided by the company, • Accept other duties and responsibilities as assigned by managementRequirements, • No prior dock and door experience needed, • Mechanical skills and some knowledge of hydraulics, electrical, and welding preferred, • Ability to perform strenuous and heavy work, • Can exert force up to 100 lbs and frequently handle loads up to 50 lbs, • Can perform continuously with full body motion for climbing, reaching, pushing, lifting, etc., • Have and maintain a valid driver's license and be insurable by Lift Power's insurance company's standards, • Valid CDL license required, • 40+ hours/week

Job DescriptionSalary: 25 Delta Metals, Inc. Position: Sheet Metal Foreman This is a non-union position! Company Overview: Delta Metals Inc. is Southeast Georgias largest sheet metal and roofing contractor. Founded in 1959, we strive to provide clients with high quality products and superiorservice at competitive prices. Our products are fabricated in our factory in Savannah, Georgia,and can be shipped to your facility for installation or our service and construction team can install them for you. Let our craftsmen create the metal products you need. Position Overview: A good fit for this role is someone with 5+ years' experience managing a construction crew- specifically in the sheet metal/commercial ductwork industry. Our Sheet Metal Foremen manages our field projects in a hands-on way. You will manage a small crew of laborers at varying job sites, installing custom duct systems. Join a team of dedicated and skilled workers to bring quality products and services to our community. Duties & Responsibilities: Coordinating daily tasks according to priorities and plans, making changes when necessary due to weather, supply, delivery and personnel Delegating individual responsibilities and projects to crew members and contractors Training, managing and mentoring employees and contractors Providing adequate resources and staffing to meet project schedules, laws, regulations, best practices and safety needs Emphasizing safe use of tools, machinery and equipment while providing training on safety gear, helmets and procedures Enforcing safety rules; evaluating the workplace for potential hazards, and working with management to mitigate safety concerns Developing and managing project timelines and quality standards for all job sites Resolving conflicts or miscommunications quickly and amicably Regularly reporting project status to supervisors, site engineers, and other officials Other duties as assigned by management Skills & Requirements: Must have 5+ years of sheet metal experience, specifically in installing duct systems. Must know how to fit/form metal using industry tools such as plate rollers, shears, etc. Have a thorough knowledge of the properties of steel, aluminum, and stainless steel when fabricating and welding Must be able to manage project schedules amid competing priorities Have knowledge of surface metal preparation for welding and painting Customer-service skills to communicate with inspectors and administration to develop a positive working relationship. Decision-making skills for selecting personnel and subcontractors for specific tasks and jobs to meet deadlines and budgets. Initiative for generating their own business opportunities and being proactive in locating new clients. Many foremen market the companies that employ them while bidding on jobs. Leadership skills for effectively delegating tasks to lower-level managers, subcontractors and construction workers. Speaking skills for providing clear orders, explaining complex information to clients and construction workers and discussing technical details with other building specialists. Technical skills for interpreting construction methods and technologies along with contracts and technical drawings. Ability to plan work, evaluate the time requirements to complete a job, and schedule accordingly Time-management skills to meet deadlines and ensure construction phases are completed on time so that the next phase can start. Writing skills for writing budgets, proposals and plans along with documenting work progress for clients and others involved. Requires the ability to use a phone and tablet to input data, such a timecard information, emails, etc. Bilingual (Spanish) a plus for this role Job Location: 218 East Lathrop Avenue, Savannah, GA 31415 Working Environment: Work is typically performed while standing, in a non-climate-controlled machine shop or on job sites with varying weather and working conditions. Salary: Starting at $25/hour Benefits: Delta Metals has a generous benefits package to include medical, dental, vision, life, long and short term disability, as well as accident, cancer, and critical illness plans, HSA, 401K, Vacation & sick time, and 6 paid company holidays. It is the policy of Delta Metals, Inc. not to discriminate against any applicant for employment, or any employee because of age, color, sex, disability, national origin, race, religion, or veteran status.

Job Description Description Maximize customer satisfaction by performing repairs, maintenance work, and installation of various equipment, primarily dock doors and levelers, that meet or exceed the customer's expectations. Respond to customers in a timely, polite, and professional manner, and conduct work with an efficiency that will contribute to the reputation, growth, and profit of Lift Power, Inc. Retain the ability to work on multiple primary duties at any given time. Primary Duties and Responsibilities: • Inspect customer equipment and perform service, maintenance, and installation tasks as necessary, • Communicate needs or concerns to the Coordinator or Department Manager, • Efficiently perform scheduled maintenance per customer contract, • Follow all scheduled maintenance procedures and policies as dictated by the company, • Accurately and neatly document each service call or installation and provide all necessary paperwork, • Complete and submit paperwork and time cards in a timely fashion, • Follow all safety procedures of both Lift Power and the customer when working on a job site, • Use appropriate PPE, • Dispose of waste properly, • Leave jobsites in orderly condition, • Follow current company policy including, but not limited to:, • Maintain the company service vehicle in a clean, orderly, and hazard-free condition, • Includes regular maintenance such as oil changes, tire rotations, etc, • Secure and maintain service and parts inventory in the company vehicle, • Provide well-maintained personal tools required to effectively perform equipment service duties, • Attend all training meetings and seminars provided by the company, • Accept other duties and responsibilities as assigned by managementRequirements, • Prior Professional Commercial dock and door experience required, • Mechanical skills and some knowledge of hydraulics, electrical, and welding preferred, • Ability to perform strenuous and heavy work, • Can exert force up to 100 lbs and frequently handle loads up to 50 lbs, • Can perform continuously with full body motion for climbing, reaching, pushing, lifting, etc., • Have and maintain a valid driver's license and be insurable by Lift Power's insurance company's standards, • Valid CDL license required

We are looking for a skilled Handyman to join our team! In this role, you will perform residential and light commercial maintenance work that may include pipe fitting, insulating, welding, repairing electrical or mechanical equipment, repairing buildings, floors, or stairs, and installing new equipm

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As the Rental Shop Technician you will be responsible for diagnosing and performing mechanical, electrical, hydraulic, and pneumatic repairs on a variety of rental, customer equipment, and tools. Additionally support management in the overall safety, operational workflow, improve equipment quality, and development of reporting technicians. Primary Responsibilities: • Inspect, diagnose, troubleshoot and locate mechanical deficiencies on heavy equipment diesel engines and components., • Repair and/or replace all components of light and heavy frame assemblies, suspension systems drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Determine extent of necessary repairs including identifying major engine and transmission overhaul needs and prepare orders for required services., • Tune up engines; diagnose computer controls, modules and air conditioning components using diagnostic equipment., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all documentation (work orders, parts orders, inspections, warranty support, comments and time sheets) in a legible, accurate and timely manner., • Perform all work in accordance with established time, quality standards and safety procedures.Additional Responsibilities:, • Participate in required safety program, and work in a safe manner., • High school diploma or equivalent preferred.Required Qualifications/Skills:, • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep required records., • Ability to read, analyzes, and interpret technical information- schematics, technical manuals, technical drawings, technical procedures, and governmental regulations, • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Skilled in ‘Basic’ computer applications including email and internet usage., • The ability to communicate through email- sending & receiving notes, attachments., • Ability to read, analyzes, and communicate technical information., • Ability to write service reports that effectively communicate required information in an understandable (clear and concise) and useable method., • Ability to ask and properly respond to questions from customers and supervisors. Preferred Qualifications/Skills:, • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Competitive Pay, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities

Job Description Joe Hudson’s Collision Center is now part of Boyd Group Services Inc., the parent company of Gerber Collision & Glass—one of North America’s leading collision repair organizations. This partnership brings expanded resources, advanced technology, and greater career growth opportunities, while preserving the people-first culture that defines JHCC. With 1,000+ locations, $3+ billion in sales, and 10,000+ team members across the U.S. and Canada, we’re driven to WOW Every Customer and Be the Best. Body Technician 401k starts on day 1, Benefits are available after 1 month, and Top Pay for Top Techs! Responsible for completing high quality auto body repairs assigned in the shortest time possible while ensuring exceptional service to our customers. • Perform duties associated with auto body repair including but not limited to disassembly; removal of auto equipment for repair access; complete all repairs by hammering, filing, filling, grinding, welding, sanding, etc.; and reassembly ensuring industry and JHCC standards are met., • Repair or replace defective parts., • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • Follow protocols provided for repairs., • Strong, consistent attention to detail., • Demonstrated ability to be able to read, write and communicate., • Positive, can-do attitude with the desire to work in a team setting, • Extensive knowledge of performing high quality repairs using up to date methods., • Ability to use all power tools required to perform position., • Minimum of three (3) to five (5) years of auto body experience required. Company DescriptionJoe Hudson’s Collision Center does the highest-quality repairs in the shortest possible time. Our expert technicians use state-of-the-art technology for excellent results, guaranteed. Our Customers Come First Since 1989, we’ve maintained a workforce of well-trained technicians who can completely repair any type of damage, from chipped paint to serious structural issues. We pride ourselves on excellent communication, so we reliably answer calls and keep clients up to date with our proprietary repair tracking system, which displays the status of your vehicle on demand. Hudson’s Collision Center does the highest-quality repairs in the shortest possible time. Our expert technicians use state-of-the-art technology for excellent results, guaranteed.\r\n\r\nOur Customers Come First\r\nSince 1989, we’ve maintained a workforce of well-trained technicians who can completely repair any type of damage, from chipped paint to serious structural issues.\r\n\r\nWe pride ourselves on excellent communication, so we reliably answer calls and keep clients up to date with our proprietary repair tracking system, which displays the status of your vehicle on demand.\r\n\r\n

Job DescriptionSummary of Primary Functions: Dobbs Equipment is seeking a Wash Rack Specialist & Facilities Maintenance. This position is responsible for performing washing and cleaning of equipment inventory. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Work alone with a limited amount of supervision., • Prepare all reports and forms required in conjunction with job assignments., • Washes and cleans machines and equipment., • Inspects and performs check-out and check-in procedures., • Documents equipment condition before and after utilization., • Assists with routine inspections, minor repairs, and general maintenance., • Maintains equipment inventory systems per standard operating procedure., • Responsible for maintaining the condition of wash rack sump and separator tanks to ensure wash rack complies with environmental standards., • Assists in preparing and packaging shipments; delivery of parts and components to customers as needed., • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Requires regular and punctual employee attendance., • Performs other duties as assigned., • Participate in all training programs as directed by the Service Manager., • Maintain a clean work area and perform work in a neat and orderly fashion., • Bring to the attention of the Service Manager any shop tools, equipment or vehicle that is not in a serviceable condition or is unsafe to use., • Always conduct self to present a professional image of the dealership., • Valid Driver’s License and maintain a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Associate degree or equivalent from two-year college or technical school or a minimum of 2 years related experience and/or equivalent combination (preferred)., • Stay current with technical changes., • Proficient knowledge of mechanical, electrical, and hydraulic systems., • Maintains current product knowledge of John Deere and competitive products., • Forklift Certification (preferred)., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Flexible schedule (sometimes weekends or overtime)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Develop skills in disassembly, assembly and repair of components and machines., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Overnight travel less than 5% (Training). While performing the functions of this job, the employee regularly works in a service shop setting and is exposed to frequently changing temperatures, wet or humid conditions, noise, vibration, fumes, odors, dust, and close proximity to moving mechanical parts. Physical Demands: The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is continuously required to: • Ability to work using Personal Protective Equipment, including respirators, welding shields, hard hats, vests, safety glasses, goggles, gloves and etc., • Ability to use full range of motion for back, arms, hands, and fingers., • Able to use full range of motion for both legs, including climbing, twisting, squatting, and pushing with both legs., • Able to use hand tools, fuel hoses, lubrication systems on all equipment, • Able to climb onto or down from mobile construction equipment, typically 3-4 feet of climbing, for service and inspection., • The employee is frequently required to lift or carry loads greater than 50 lbs but less than 75 lbs., • Specific vision abilities required by this job include close, distance and color vision. Dobbs Equipment is an Equal Employment Opportunity (EEO) and Affirmative Action employer. We are committed to providing an environment free of discrimination, harassment and retaliation both for our employees and applicants. We make all employment related decisions on the basis of an individual’s qualifications and job performance. We recruit, hire, promote, train, transfer, and make compensation decisions without regard to race, religion, color, creed, national origin, ancestry or citizenship status, sex, sexual orientation, gender, genetic information, marital status, pregnancy status, age, disability, protected veteran status, or any other characteristic protected by federal, state or local law. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice. Dobbs Equipment is an Equal Opportunity and At-Will Employer.

Job Description The Maintenance Technician will be responsible for providing technical maintenance expertise related to work order processing, installing, repairing, servicing equipment, and overall maintaining wash quality standards and overall product including the vacuum area and pay station throughout the assigned District. This role will involve training of all team members on maintenance, repairs, and safety standards through training programs and scheduled site visits. The goal of this role is to support a reduction of wash down times, closing site-level work orders, and staying within given capital and operational budgets. This role will work closely with the District Manager, Site Managers, local site level team members and Maintenance Director to expeditiously address wash down, wash quality, and facilities related issues. They will also be responsible for reviewing and following up on completion of any 3rd party scheduled projects. Responsibilities Maintenance Support • Provide technical knowledge and support during wash down, • Perform installation and updating of wash equipment, components, repairing, replacing, troubleshooting equipment and buildings on property, • Ensure optimal operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems; following diagrams, sketches, operations manuals, manufacturer’s instructions, and engineering specifications, troubleshoot malfunctions while training others, • Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments, • Removes defective parts by dismantling devices; using hoists and hand and power tools; examining form and texture of parts, • Adjusts functional parts of devices and control instruments by using hand tools, • Advanced electrical work and control wiring, plumbing maintenance, installing, dismantling, repairing and reassembling machinery and equipment, • Metal fabrication/welding, • Provide resources to site team members to deliver a great wash experience to customers, • Scheduled site visits each week to designated sites within district, • Actively participate in weekly meetings with operations and support team, • Maintain a work order target as budgeted, • Maintain safety standard requirements, • Ensure landscaping is maintained neat and clean, • Attend weekly wash quality meeting with District and facilities management, • Collaborate with District Manager and Site Managers to provide expert knowledge on facilities and to coach, direct, train local based team members., • Work together with Facilities Maintenance Director to schedule production to budget, • Assist acquisitions and new development team in launching locations, • Interact with support office to ensure completion of any licensing or permitting requirements, • Work directly with District Manager and Facilities Maintenance Director to resolve issues and review overall tunnel operations, • Travel and training between all sites in the district performing tunnel repairs and new equipment installs, • Partner closely with District/Area team to complete high priority projects and implement new technology launches, • Maintain budgeted standards for facilities and equipment repairs/Cap Ex projects, • Increase car counts through efficiencies, • Facilitate training with Site Managers, • Participate in training of District Manager new hires on daily operating procedures, closing procedures, and any facility or wash related task related to operations, • Onsite training of team members concerning quality of wash and best safety practices Required Skills • 2+years’ experience in an industrial, facilities, or manufacturing environment, • Knowledge of mechanical/electrical components including shafts, bearings, gear boxes, pumps, motors, drives, • Valid driver’s license, • Associate degree, equivalent technical training, or appropriate hands-on experience, • Certification through a tech/trade school beyond high school preferred, • Ability to effectively train team members on the proper way to safely operate equipment while ensuring a high-quality member experience, • Strong time management and analytical skills, • Excellent verbal and written communication skills, • Excellent organizational skills and attention to detail, • Ability to perform well in a fast-paced environment, • Carwash management/mechanical experience preferred, • Proactive, self-starter on identifying tasks and programs to complete and/or document; strong ability to work under pressure in a fast-paced environment, • Available to be on-call during weekends, • Available to do project in evening after normal business hours, • Extensive travel required

Job DescriptionSalary: 20 Delta Metals, Inc. Position: GENERAL CONSIDERATION Company Overview: Delta Metals Inc. is Southeast Georgias largest sheet metal and roofing contractor. Founded in 1959, we strive to provide clients with high quality products and superiorservice at competitive prices. Our products are fabricated in our factory in Savannah, Georgia,and can be shipped to your facility for installation or our service and construction team can install them for you. Let our craftsmen create the metal products you need. Position Overview: Delta Metals is always looking for smart, talented, dedicated, and hard-working individuals to join our team. If you are looking for a new place to call home in your career, but do not see any open positions on our website that suit your skills, experience, or career goals, we encourage you to apply for our GENERAL CONSIDERATION position. This allows you to drop your resume into our files for consideration when we need the skills that YOU have! You never know who we will be looking for next! Duties & Responsibilities: • Basic duties in our shop and in the field center around sheet metal fabrication and installation, welding/fabrication, and roofing., • Office positions range from drafting, estimating, projects management, sales, finance, HR, office admin, safety, and logistics. If you dont see it listed now, we may need it in the future. Skills & Requirements: Skills will depend on the position applied for, but we are looking for these skills in EVERY team member: • Ability to multitask and manage several projects at a time, • Exceptional attention to detail and a high level of accuracy, • Interpersonal skills to work within a team, taking direction from managers, • Time management skills to complete error-free work within the required timeframe, • Communication skills with an emphasis on reading and writing for creating documentation and reports, • Critical thinking and problem-solving abilities to develop creative solutions, • Requires the ability to use a phone and tablet to input data, such as timecard information, emails, etc., • Reliable transportation, and dependable attendance, • Bilingual (Spanish) a plus for this role Job Location: 218 East Lathrop Avenue, Savannah, GA 31415 Working Environment: Varies depending on the position applied for Salary: Starting at $20/hour, but it depends on experience and skill level and position applied for Benefits: Delta Metals has a generous benefits package to include Medical, dental vision, life, long and short-term disability, as well as accident, cancer, and critical illness plans, HSA, 401K, Vacation & sick time, and 6 paid company holidays. It is the policy of Delta Metals, Inc. not to discriminate against any applicant for employment, or any employee because of age, color, sex, disability, national origin, race, religion, or veteran status.

Welding Equipment Maintenance Manager | Automotive Manufacturing. Welding Equipment Maintenance Manager. Own the Maintenance Index (Downtime, PM completion, Safety, and Skill levels) for the entire welding shop.

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As a Rental Field Service Technician - Mechanic, you will be troubleshooting, diagnosing and performing standard mechanical, electrical, hydraulic, and pneumatic repairs on customer and Yancey’s rental equipment in the field. Candidates must furnish their own tools, be able to operate industry associated heavy equipment, and complete all assigned work in an accurate and timely manner. Primary Responsibilities: • Inspect, diagnose, troubleshoot, and locate mechanical deficiencies on Heavy Equipment., • Source and order parts as needed., • Proper use of diagnostic equipment., • Repair and/or replace all components of diesel engines hydraulic systems, air conditioning systems, suspension systems, drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all work orders (including warranty information) and time sheets in a legible, accurate, and timely manner., • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Perform all work in accordance with established quality standards and safety procedures., • Must work overtime on short notice., • Maintain service vehicle inspection records, daily inspections and driver logs as required by the Department of Transportation., • Must keep truck and equipment clean and presenting the best impression possible to the public., • Photograph equipment when necessary, • Must be able to obtain a CDL license if requiredAdditional Responsibilities:, • Participate in required safety program, and work in a safe manner., • Maintain safe driving record., • High school diploma or equivalent preferred., • 5+ years of relevant experience. Required Qualifications/Skills:, • Must be 21-years-old or older., • Valid, active driver's license., • Ability to read, write, and speak English., • Ability to clear driver screenings and provide necessary information for a complete DQ file, including but not limited to:, • Road Test administered by Yancey personnel., • Background check and MVR with less than 10 points., • DOT Physical, • Drug Screen, • Must not be disqualified to drive a CMV under 49 CFR § 391.15., • Strong troubleshooting skills., • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust, and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep all required records., • Ability to read, analyze, and interpret technical information from schematics, technical manuals, technical drawings, technical procedures, and governmental regulations., • Basic computer skills (Windows based programs and email).Preferred Qualifications/Skills:, • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Competitive Pay, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As a Heavy Equipment Diesel Technician, you will be diagnosing, troubleshooting and repairing standard mechanical, electrical, hydraulic, and pneumatic components of the diesel heavy engines including, but not limited to construction equipment. Primary Responsibilities: • Inspect, diagnose, troubleshoot and locate mechanical deficiencies on heavy equipment diesel engines and components., • Repair and/or replace all components of light and heavy frame assemblies, suspension systems drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Determine extent of necessary repairs including identifying major engine and transmission overhaul needs and prepare orders for required services., • Tune up engines; diagnose computer controls, modules and air conditioning components using diagnostic equipment., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all documentation (work orders, parts orders, inspections, warranty support, comments and time sheets) in a legible, accurate and timely manner., • Perform all work in accordance with established time, quality standards and safety procedures.Additional Responsibilities:, • Participate in required safety program, and work in a safe manner., • High school diploma or equivalent preferred.Required Qualifications/Skills:, • Prior experience working as a diesel technician, • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep required records., • Ability to read, analyzes, and interpret technical information- schematics, technical manuals, technical drawings, technical procedures, and governmental regulations, • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Skilled in ‘Basic’ computer applications including email and internet usage., • The ability to communicate through email- sending & receiving notes, attachments., • Ability to read, analyzes, and communicate technical information., • Ability to write service reports that effectively communicate required information in an understandable (clear and concise) and useable method., • Ability to ask and properly respond to questions from customers and supervisors. Preferred Qualifications/Skills:, • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Competitive Pay based on experience, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities #zr

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As a Heavy Equipment Field Service Diesel Technician, you will be diagnosing, troubleshooting, and performing standard mechanical, electrical, hydraulic, and pneumatic repairs on customer's equipment in the field. Technicians furnish their own tools, are able to operate industry associated heavy equipment, and complete all assigned work in an accurate and timely manner. Primary Responsibilities: • Inspect, diagnose, troubleshoot, and locate mechanical deficiencies on heavy equipment diesel engines and components. Source and order parts as needed., • Determine extent of necessary repairs including identifying major powertrain overhaul needs and prepare orders for required services., • Proper use of diagnostic equipment., • Repair and/or replace all components of diesel engines hydraulic systems, air conditioning systems, suspension systems, drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all work orders (including warranty information) and time sheets in a legible, accurate, and timely manner., • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Perform all work in accordance with established quality standards and safety procedures., • Maintain service vehicle inspection records, daily inspections and driver logs as required by the Department of Transportation (DOT)., • Must keep truck and equipment clean and presenting the best impression possible to the public., • Photograph equipment when necessary.Additional Responsibilities:, • Participate in required safety program, and work in a safe manner., • High school diploma or equivalent., • 4+ years of industry experience. Required Qualifications/Skills:, • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep required records., • Ability to read, analyzes, and interpret technical information- schematics, technical manuals, technical drawings, technical procedures, and governmental regulations, • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Skilled in ‘Basic’ computer applications including email and internet usage., • The ability to communicate through email- sending & receiving notes, attachments., • Ability to read, analyzes, and communicate technical information., • Ability to write service reports that effectively communicate required information in an understandable (clear and concise) and useable method., • Ability to communicate effectively with customers and coworkers. Keep customers up-to-date using MODERN as the main method of communication., • Valid, active driver's license., • Ability to read, write, and speak English., • Ability to clear driver screenings and provide necessary information for a complete DQ file, including but not limited to:, • Road Test administered by Yancey personnel., • Background check and MVR with less than 10 points., • DOT Physical, • Drug Screen, • Must not be disqualified to drive a CMV under 49 CFR § 391.15. Preferred Qualifications/Skills:, • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Competitive Pay based on experience, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As a Heavy Duty Diesel Truck Technician, you will be diagnosing, troubleshooting and repairing diesel engines and components on all makes and models of on-highway diesel trucks and buses. Primary Responsibilities: • Inspect, diagnose, troubleshoot and locate mechanical deficiencies on buses and on-highway diesel truck engines and components., • Repair and/or replace all components of diesel engines, hydraulic systems, air conditioning systems, suspension systems, drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Determine extent of necessary repairs including identifying major power-train overhaul needs and prepare orders for required services., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all documentation (work orders, parts orders, inspections, warranty support, comments and time sheets) in a legible, accurate and timely manner., • Perform all work in accordance with established time, quality standards and safety procedures.Additional Responsibilities:, • Participate in required safety program, and work in a safe manner., • High school diploma or equivalent preferred.Required Qualifications/Skills:, • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep required records., • Ability to read, analyzes, and interpret technical information- schematics, technical manuals, technical drawings, technical procedures, and governmental regulations, • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Skilled in ‘Basic’ computer applications including email and internet usage., • The ability to communicate through email- sending & receiving notes, attachments., • Ability to read, analyzes, and communicate technical information., • Ability to write service reports that effectively communicate required information in an understandable (clear and concise) and useable method., • Ability to ask and properly respond to questions from customers and supervisors. Preferred Qualifications/Skills:, • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Competitive Pay, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities

Job Description Summary of Primary Functions: Dobbs Equipment is seeking an experienced Service Technician. Technicians are responsible for the repair, diagnosis, overhaul, and reconditioning maintenance of customer and company heavy equipment and components. Depending on the location and assignment, the technician will be responsible for some, or all the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. This job description does not include a complete listing of all the duties and functions of the position. Management reserves the right to assign other duties or projects as necessary. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Follow all safety rules and regulations in performing work assignments while maintaining a safe work environment and safe work habits., • Recondition, repair, service, and assemble any machines/industrial equipment., • Diagnose problems and determine what repairs are needed., • Perform any inspections as required., • Check and report any shortages and malfunctions to the Service Manager., • Maintain records and account for all time, parts, and supplies used in repairing and servicing both customer and dealership equipment., • Handle customer problems both objectively and tactfully., • Assist in directing work of helpers or on the job trainees and provide instructions as required., • Complete dis-assembly and inspection, as efficiently as possible, so parts may be ordered, and machine work can be scheduled promptly., • Perform all service tasks as assigned by the Service Manager, Supervisor, or Shop Foreman., • Prepare all reports and forms required in conjunction with job assignments., • Report to Service Manager any additional work required to ensure proper operation and safety of equipment., • Participate in service training programs required for development of skills and knowledge., • Maintain a clean work area and perform work in a neat and orderly fashion., • Bring to the attention of the Service Manager any shop tools, equipment or vehicle that is not in a serviceable condition or is unsafe to use., • Represent the dealership as a professional Service Technician at all times., • Operate trucks and equipment with extreme care and caution., • Maintain and care for shop tools, equipment, vehicles, and other employee’s belongings., • Reports to work on time, as scheduled., • Ability to work up to 12-hour days, varying shifts, weekends, and holidays as needed., • Ability to operate company vehicles and follow all motor vehicle state safety laws (if necessary)., • All employees are expected to adhere to the safety policies of Dobbs Equipment and the clients for whom we work., • Following the safety policies of Dobbs is a condition of employment and is everyone’s responsibility. Qualification: The requirements listed below represent the knowledge, skill, and/or ability required. • Valid Driver’s License and maintain a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Ability to operate heavy equipment safely around shop. Education, Skill, and/or Experience Requirements: • Associate degree or equivalent from two-year college or technical school or a minimum of 2 years related experience and/or equivalent combination (preferred)., • Stay current with technical changes., • Proficient knowledge of mechanical, electrical, and hydraulic systems., • Maintains current product knowledge of John Deere and competitive products., • Forklift Certification (preferred)., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Flexible schedule (sometimes weekends or overtime)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Develop skills in disassembly, assembly and repair of components and machines., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Overnight travel less than 5% (Training)., • Bilingual a plus. Work Environment: While performing the functions of this job, the employee regularly works in a service shop setting and is exposed to frequently changing temperatures, wet or humid conditions, noise, vibration, fumes, odors, dust, and close proximity to moving mechanical parts. Physical Demands: The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is continuously required to: • Ability to work using Personal Protective Equipment, including welding shields, hard hats, vests, safety glasses, goggles, gloves and etc., • Ability to use full range of motion for back, arms, hands, and fingers., • Able to use full range of motion for both legs, including climbing, twisting, squatting, and pushing with both legs., • Able to use hand tools, fuel hoses, lubrication systems on all equipment, • Able to climb onto or down from mobile construction equipment, typically 3-4 feet of climbing, for service and inspection., • The employee is frequently required to lift or carry loads greater than 50 lbs but less than 75 lbs., • Specific vision abilities required by this job include close, distance and color vision., • The employee is regularly required to talk or hear at moderate noise levels. We’re an Equal Employment Opportunity and Affirmative Action Employer Dobbs Equipment is an Equal Employment Opportunity (EEO) and Affirmative Action employer. We are committed to providing an environment free of discrimination, harassment and retaliation both for our employees and applicants. We make all employment related decisions on the basis of an individual’s qualifications and job performance. We recruit, hire, promote, train, transfer, and make compensation decisions without regard to race, religion, color, creed, national origin, ancestry or citizenship status, sex, sexual orientation, gender, genetic information, marital status, pregnancy status, age, disability, protected veteran status, or any other characteristic protected by federal, state or local law. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice. Dobbs Equipment is an Equal Opportunity and At-Will Employer.