Trabajos welding en San Antonio, TexasCrear alertas

Job Description Job Summary The Welder position will perform diversified hand welding on a wide variety of complex assemblies and structures using welding equipment to fabricate or repair products such as machined parts and trenching and shoring equipment. This position is a safety sensitive role that requires compliance with the company's drug and alcohol policy and adherence to all safety regulations and procedures. Key Responsibilities • Receives instructions, prints, and work orders for the job. Plans details of workingprocedure, andtooland material requirements., • Fabricates equipment by cutting, burning, and welding various metals., • Repairs equipment by using welding techniques andappropriate weldingequipment., • Cleans and prepares surfaces to be welded. Sets up, assembles, and tacks weld parts., • Repairs worn or defective surfaces., • Uses burning equipment to dismantle assemblies and to cut material to size and shape., • Keeps equipment and work area clean and orderly., • May be assigned to dismantle or cut up obsolete equipment, setting aside parts for scrap dealers., • Completes other tasks as may be assigned by the Supervisor., • Must have the ability tolift upto 50 pounds., • Must be willing to work hours asrequired., • Completion of a formal apprenticeship program or completion of Company training program to the satisfaction of the Supervisor., • Strong attention to detail, precision, and control., • Emotional Intelligence,collaborationand communication skills, • Quick thinker and ability to prioritize safety first, • Minimum (3) three years welding experience, • Must have a Professional Welder Certification, • Ability to obtain forklift certification asrequired, • Musthave a valid driver’s license.

Job Description MGC Contractors, Inc. is a 100% Employee Owned Corporation. We specialize in all forms of water and wastewater general contracting including Job Order Contracting, Construction Manager at Risk, Design-Bid-Build, and Design-Build throughout Arizona, Texas, Utah, and New Mexico. MGC Contractors, Inc is looking for Pipe Layers to join our Texas Division in the San Antonio/New Braunfels area. PRIMARY RESPONSIBILITIES AND DUTIES • Install mechanical joint water line, and bolt together water line, install air release valves and inline valves., • Grade for flow of sewer line pipe., • Lay ductile water line and PVC sewer pipe. Set line and grade for water line/sewer, line prep grade for water lines/sewer lines. Install water line with gaskets and mechanical joints. Backfill waterline/sewer line insures sewer line has a positive flow., • Plans pipe, installation, or repair according to specifications., • Aligns and positions pipes to prepare them for welding or sealing., • Checks slopes for conformance to requirements and specifications., • Calculating and adjusting grade using a level an a laser., • Selects type and size of pipe and related material according to job specifications., • Measures and marks pipes to required length for cutting and threading., • Cuts, threads, hammers, and welds pipe to specifications using saws, pipe threaders, and benders., • Connects pipe pieces and seals joints., • Locates existing pipes needing repair or replacement through potholing and/or excavation., • Taps and drills holes into pipes to introduce auxiliary line or devices., • Secures pipes to structures with clamps, brackets, and hangers., • Grouting and clearing manholes., • Inspects, examines, and tests installed systems and pipe lines using pressure hydrostatic testing, observation, or other testing methods., • High School Diploma or GED required., • Two (2) years to three (3) years of related experience laying underground water lines, sanitary or storm sewers required. MGC Contractors is an equal employment opportunity employer and, as such, we consider individuals for employment according to their abilities and performance. Employment decisions are made without regard to age, race, religion, sex, national origin, physical or mental disability, genetic information or any other classification protected by law. All employment requirements mandated by state and federal regulations will be met. Discriminatory or harassing conduct in the workplace, whether committed by management or non-management employees or outside person (vendors, customers, etc.) is prohibited. This job description is not meant to encompass all tasks and or job responsibilities, but rather it is meant to provide the employee with a general summary of what the position entails. MGC Contractors has the right to amend or revise this job description at any time. Reasonable accommodations may be made when it does not impose an undue hardship on the company to do so. Passing a pre-employment drug screen is required. Job Posted by ApplicantPro

Job Description We are seeking an experienced Pipe Fitter Welder Combo to install, assemble, and maintain piping systems for commercial and industrial applications. The ideal candidate will have experience working with various piping materials and ensuring high-quality installations that comply with industry standards and regulations. Key Responsibilities: • Install, inspect, and repair piping systems, including water, gas, and industrial piping., • Cut, thread, weld, and assemble pipes using various tools and techniques., • Read and interpret blueprints, schematics, and specifications to determine the layout and installation of piping systems., • Ensure compliance with safety regulations, industry codes, and project requirements., • Test piping systems for leaks using pressure gauges and other testing equipment., • Work closely with other trades, including welders, plumbers, and general contractors., • Maintain an organized and safe work environment, adhering to OSHA standards., • Train and mentor apprentices and junior pipe fitters., • Weld - Mig, Tig, Stick exp neededQualifications:, • High school diploma or equivalent., • Minimum of 3-5 years of experience in pipe fitting and welding for commercial or industrial projects., • Ability to read and interpret blueprints, technical drawings, and piping schematics., • Experience working with a variety of pipe materials, including steel, copper, and PVC., • Proficiency in using pipe fitting tools, including cutting, threading, and welding equipment., • Strong problem-solving and troubleshooting skills., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license with a clean driving record., • Ability to pass background check and drug screening.Preferred Skills:, • Certification in pipe fitting or welding., • Experience with industrial piping systems and HVAC piping., • Strong communication and teamwork skills., • Ability to work independently and manage multiple projects. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”) This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $162,720.00/Yr. ID 2025-17268 Category Body Technician Position Type Regular Full-Time Location : Postal Code 78251 Location : Address 7602 Ingram Road Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $162,720.00/Yr. Prioritization Tier 1 – Priority

Job Description We are seeking a Hollow Metal Shop Welder to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload

Job Description About Us: At Automated Cleaning Technologies, we specialize in high-quality stainless- steel fabrication, delivering exceptional machinery that meets the needs of our clients across the aerospace, manufacturing, military, and energy sectors. Our dedicated FAB team is at the heart of our success, and we are currently seeking hard-working, skilled Metal Fabricators and Welders to join our dynamic shop. Job Summary: As a Metal Fabricator and Welder, you will be responsible for the fabrication, fit-up, and welding of stainless steel, steel and aluminum components according to project specifications and drawings. Your expertise will contribute to the on-time production of durable and high-quality metal skids, tanks, and system features and products. Key Responsibilities: • Be on time to work daily., • Be reliable, have a great “can-do” attitude, and understand that time is money., • Be willing to go the extra mile to achieve timely project completions., • You will be assigned projects or segments of a project., • You will attend project kick off meetings and provide relevant input for the most effective (time and quality) completion of the project., • View and understand all drawings with AWS weld symbols on monitors in your fabrication cell and apply your experience to create accurate metal products that exceed expectations., • Receive CNC laser cut and CNC formed parts at your work area., • Measure and double check the dimensions of received parts., • Fit up, fabricate and assemble steel components using various company tools, PNG laser and Miller machines, and techniques. Use your own basic tools to achieve completed products., • Perform LASER, TIG, and MIG welding to ensure structural integrity and quality., • Be able to weld in various positions., • Operate and maintain fabrication machinery and tools with a focus on safety and efficiency., • Conduct self-quality control checks and get daily supervisor approval to ensure your work meets project expectations., • Collaborate with team members to maximize productivity and meet project deadlines., • Maintain a clean and organized workspace, following safety protocols., • Care for company tools and machines like they are your own., • 3-5 years of proven experience as a Metal Fabricator and Welder in high production settings working on 20 ga to 1⁄2” thick material., • Ability to learn and implement LASER welding techniques to achieve requisite fabrication department project speed., • Proficiency in TIG and MIG welding techniques. You Must pass site TIG test., • Strong understanding of fabrication processes, tools, and safety standards., • Good communication skills in English., • Excellent attention to detail and problem-solving skills., • Ability to lift heavy materials (up to 50 lbs.) and perform physical tasks., • Competitive pay, overtime, and production incentives (time is money!)., • STARTING PAY IS DIRECTLY LINKED TO YOUR INCOMING SKILL SETS!, • Comprehensive health, dental, and vision insurance., • Paid time off and holidays., • Opportunities for skill development and career advancement.

Job Description This is an excellent opportunity to use your experience in the welding and skilled trades fields to teach others seeking education and training. No previous teaching experience required but must be a certified or licensed Welder and experienced (see below requirements) JOB SUMMARY Instructors are responsible for teaching students in our training programs in classroom and hands-on lab settings, ensuring that they gain the knowledge and skills that are required for entry-level employment in their chosen field. Instructors are also responsible for sound educational practices and the academic development of each student. Instructors will also manage their classroom environment and promote a positive and engaging learning experience, provide support, tutoring and other assistance as needed. Instructors are to “model" the professional behaviors, language, and activities expected of our students. ESSENTIAL FUNCTIONS • Utilize classroom and lab instruction, student assessment mechanisms, and classroom management techniques to provide an engaged classroom experience to students., • Ensure that each student has been presented with the material to successfully meet the learning objectives of each course within a student’s program of study, • Ensure that instructional materials and equipment are ready for student use, sufficient in quantity, are properly maintained and are in working order prior to class time, • Participate in ongoing faculty assessment and professional development activities to ensure an active and engaged classroom experience for all students; maintain required certification and license, • Actively participate in meetings, review and analyze assessment data, compile reports, and meet academic and administrative deadlines, • Ensure campus compliance with all federal, state, and regulatory bodies’ guidelines, along with internal policies of the company, • Other duties as assigned MINIMUM REQUIREMENTS • High school diploma, GED, and/or proof of completion of related vocational training program., • Verifiable work experience including a minimum of five years verifiable welding industry experience within the last ten years, • Must be certified or licensed where required by law, • Strong written, oral, and interpersonal communication skills with demonstrated success in collaborating with diverse groups of employees and customers, • Demonstration of highest levels of integrity and professionalism in all aspects, including appearance, demeanor, and attitude, • Ability to work in an observation/coaching style environment, • Capability to prioritize, accept responsibility, and work within deadlines, • Superior organizational and problem-resolution skills, • Demonstrated commitment to customer service, • Previous experience teaching in an education setting and/or experience with training employees within the industry, • Demonstrate knowledge of federal, state, and accreditation regulations applicable to the proprietary education industry Ancora Education is committed to creating a diverse and inclusive work environment. We are an equal opportunity employer that maintains a policy of nondiscrimination with respect to all employees and applicants for employment. All employment decisions are made without regard to individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law.

Job Description No teaching experience required, we will provide all necessary tools and training to succeed!! Full and part-time available We call it being a life changer, but you’ll call it a job you love while helping others find the same. You’ll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities • Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline;, • Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction;, • Modifies instructional methods and strategies to meet diverse students’ needs;, • Prepare lesson plans and teach course as prescribed by the approved institutional curriculum;, • Minimum of 3 years of industry experience preferred;, • Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred;, • Training & Development, • Fun & Energetic, Family-Based Environment, • Continuous Growth Opportunities, • Medical, Dental, & Vision Options, • Health Savings & Flexible Spending Options (HSA & FSA), • Basic Life & Accident Insurance, • Short & Long-term Disability, • 401K Retirement Plan SCI has been changing lives for over 60 years, now and we’re just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Job Description At Balance Staffing we’re obsessed with your success! Let us help you achieve your career dreams. Job Title: Welder Type of Role: Temp to hire Shift / Hours: Monday - Friday (7am – 3pm) Location: Southside San Antonio Hourly Range: $21 - $24 A Certified Welder is responsible for performing high-quality welding using TIG, MIG, and Stick welding techniques to fabricate, assemble, and repair metal components. This role works closely with production teams, supervisors, and quality personnel to ensure welds meet required specifications, safety standards, and project timelines. The Certified Welder interprets blueprints and technical drawings, prepares materials, and inspects completed welds to ensure accuracy and durability. This position plays a key role in supporting daily production operations within a fast-paced manufacturing or fabrication environment while maintaining a strong focus on safety, precision, and quality workmanship. Role and Responsibilities: • Perform TIG, MIG, and Stick welding on a variety of materials and components., • Read and interpret blueprints, drawings, and welding symbols to determine project requirements., • Inspect completed welds to ensure they meet quality and safety standards., • Prepare materials by cutting, grinding, and cleaning surfaces prior to welding., • Maintain welding equipment and ensure tools are functioning properly., • Follow all safety regulations and welding procedures to maintain a safe work environment., • Work collaboratively with team members to meet production and project deadlines. Skills and Experience: • Certified Welder required (AWS certification or equivalent preferred), • Minimum 2–3 years of welding experience., • Proven experience with TIG, MIG, and Stick welding., • Ability to read and interpret blueprints and technical drawings., • Strong attention to detail and commitment to quality workmanship., • Ability to work in a manufacturing or fabrication environment. Preferred Qualifications: • Experience working with steel and other metals in a production environment., • Experience in manufacturing, fabrication, or automotive industries. Apply now and one of our recruiters will reach out to you! Balance Staffing is proud to be an equal-opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status, or any other characteristic protected by federal or state law. Company DescriptionBalance Staffing is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity Veteran status, or any other characteristic protected by federal or state law.Balance Staffing is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity Veteran status, or any other characteristic protected by federal or state law.

Job DescriptionDescription: Job Summary: The Welder Fabricator is responsible for certified structural welding, custom fabrication, mechanical installation, and equipment support across the facility. This position supports the Maintenance and Kaizen teams by designing, fabricating, and installing engineered solutions that improve equipment reliability, safety, and efficiency. Additionally, this role performs mechanical work including hydraulic and water pump replacement, electric motor disconnection and reconnection. Main Duties and Responsibilities (Other duties may be assigned) • Perform certified structural welding in accordance with applicable codes, specifications, and company safety standards, • Design, fabricate, and install custom components including structural supports, guards, fixtures, platforms, and equipment modifications, • Independently develop fabrication solutions when drawings or prints are not available, • Generate materials requisition for fabrication projects, including materials, hardware, and consumables, • Execute 100% turnkey fabrication projects, including design, fabrication, installation, and final verification, • Support Maintenance removing, replacing, and installing hydraulic, water, and process pumps across manufacturing equipment including performing mechanical alignment and verification following pump installation, • Follow all Lockout/Tagout (LOTO), electrical safety, and mechanical safety procedures, • Support Kaizen and continuous improvement initiatives through fabrication and mechanical modifications, • Collaborate with Maintenance, Engineering, and Operations teams to improve equipment reliability and safety, • Keep organized records, documents, drawings, information of assigned projects/tasks, • Maintain a clean, organized, and safe fabrication and work area. · High school diploma or GED Experience: · Minimum of 5 years of industrial welding and fabrication experience · Demonstrated experience performing structural welding in an industrial or manufacturing environment · Proven experience with mechanical work including pump replacement and equipment installation Certificates, Licenses, Registrations: · Current Structural Welding Certification Computer Skills: · Basic proficiency in Microsoft Word and Excel · Ability to use email, electronic documentation, and basic digital applications for work orders and project documentation Mathematical Abilities: · Intermediate-advanced math skills. · Ability to perform measurements, calculations, and layout work required for fabrication · Ability to interpret dimensions, tolerances, and specifications Analytical or Reasoning Abilities: · Strong analytical, planning skills and critical thinking ability required with orientation for continuous improvement. · Ability to effectively prepare technical documentation such as sketches/drawings, materials, procedures, etc. of assigned projects. · Ability to understand and follow written technical procedures/instructions · Strong problem-solving and mechanical reasoning skills · Ability to independently design solutions for fabrication and mechanical challenges Communication Skills: (Writing, Foreign Language, Reasoning) · Ability to read, write and speak English · Highly effective, articulate communication skills (verbal & written) with strong interpersonal effectiveness and the ability to work with all levels in the organization and across cultures · Bilingual English Spanish preferred Other Skills (Technical, or Other special knowledge and abilities) · Ability to effectively organize and prioritize work. · Strong attention to detail and ability to effectively manage a variety of projects and tasks. · Takes initiative, approaches others in a positive and constructive manner, and works well independently to achieve results · Willingness to learn, adapt, and rotate across multiple operations.

Job DescriptionImmediately hiring MIG Welders. The ideal candidate will have a strong background in MIG welding, particularly in a manufacturing shop environment. Pay is $18-$22/hr. to start based on experienceShift is Mon-Fri 7am-5pm, Saturdays as required MIG Welder Duties: • MIG Welding, • Structural welding in shop, • Must be able to weld on carbon steel, • Machine and equipment operating, • Operate overhead crane in shop to move material, • Repair, maintain, and rebuild, • Fabrication in shop, • Use grinder and cutting torch as needed, • Interpret blueprints, technical drawings, and welding symbols to accurately perform welds, • Inspect completed welds for strength, appearance, and conformance to industry standardsRequirements:, • Looking for at least 3 yrs. MIG welding experience, • Ability to fabricate metal in shop, • Solid understanding of welding techniques, safety standards, and welding symbols, • Ability to work in physically demanding environments, including standing for extended periods and lifting heavy materials, • Ability to use additional tools and equipment such as grinders and cutting torches, • Weld test will be conductedPlease call 210-664-2680 #vipstaffing#zrsat

Job DescriptionSalary: $20-$22 (DOE) Key Responsibilities: • This position is responsible for performing basic to comprehensive welding repairs and new fabrications while learning and developing technical skills, • Performs basic and comprehensive repair welds on equipment and components, • Performs basic and comprehensive arc welding, air arc, gas welding, and cutting, • Fabricates new components from shop drawings and/or blueprints, • Works as a member of a team to provide basic technical services that satisfy customer needs and achieve departmental goals, • Works overtime as required by workload and customers needs, • Prepares service reports and any other necessary paperwork, • Examines workpieces for defects to ensure conformance with specifications, • Maintains all company equipment, tools, and work areas in a good, clean, and working order, • Performs tasks under minimal supervision, • Provides assistance to other Welders, • Adheres to contamination control and HAZMAT rules and regulations, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Previous experience in welding, manufacturing, or other related fields., • Familiarity with welding tools and procedures., • Excellent work habits, accuracy, attention to detail, and quality of work., • Auger and fabrication repair experience a plus, • Can lift at least 50 pounds and perform physically demanding tasks., • Willingness to undergo pre-employment drug testing and welding test., • Travel might be required. Benefits: • 401(k) retirement plan., • Dental, health, vision, and life insurance., • Employer paid short-term and long-term disability benefits. Work Location: • Hourly position based in Converse, TX. We are an equal opportunity employer and greatly value the diverse backgrounds of our team. Candidates from all walks of life are enthusiastically encouraged to apply.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: • Read blueprints and other customer specifications/drawings., • Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG)., • Minimum 8 years of naval/commercial welding experience., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass hair follicle test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description This is an excellent opportunity to use your experience in the welding and skilled trades to teach others seeking education and training. No previous teaching experience is required, but must be a certified or licensed Welder and experienced (see below requirements) JOB SUMMARY Instructors are responsible for teaching students in our training programs in classroom and hands-on lab settings, ensuring that they gain the knowledge and skills required for entry-level employment in their chosen field. They are also responsible for sound educational practices and the academic development of each student. Instructors will also manage their classroom environment and promote a positive and engaging learning experience, providing support, tutoring, and other assistance. Instructors are to “model" the professional behaviors, language, and activities expected of our students. MINIMUM REQUIREMENTS • High school diploma, GED, and/or proof of completion of related vocational training program., • Verifiable work experience, including a minimum of five years of verifiable welding industry experience within the last ten years, • Must be certified or licensed where required by law, • Strong written, oral, and interpersonal communication skills with demonstrated success in collaborating with diverse groups of employees and customers, • Demonstration of highest levels of integrity and professionalism in all aspects, including appearance, demeanor, and attitude, • Ability to work in an observation/coaching style environment, • The capability to prioritize, accept responsibility, and work within deadlines, • Superior organizational and problem-resolution skills, • Demonstrated commitment to customer service, • Previous experience teaching in an education setting and/or experience with training employees within the industry, • Demonstrate knowledge of federal, state, and accreditation regulations applicable to the proprietary education industry Applicants must be authorized to work for any employer in the U.S. This job posting does not qualify to sponsor or take over sponsorship of an employment Visa for those who do not meet the work authorization requirements for employment in the U.S. Ancora Education is committed to creating a diverse and inclusive work environment. We are an equal-opportunity employer that maintains a policy of nondiscrimination with respect to all employees and applicants for employment. All employment decisions are made without regard to an individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law.

Job Title: Controls Engineer Job Location: San Antonio, TX Pay Rate: $51 – $55.17/ hour on W2 Only Job Type: Contract – 12 months Job Description: Position Overview A leading manufacturing organization is seeking a Controls Engineer to support stamping production engineering operations in San Antonio, TX. This role will focus on the planning, design, installation, commissioning, and troubleshooting of automated manufacturing equipment, including stamping and laser welding systems. The ideal candidate will have experience with industrial automation, Siemens PLC programming, and equipment commissioning, and will work closely with engineering teams, equipment vendors, and maintenance personnel to ensure efficient and reliable production processes. Key Responsibilities • Support the design, installation, and startup of new and modified manufacturing equipment within stamping and automated production environments., • Collaborate with OEM vendors and commissioning teams to ensure equipment is installed and configured according to engineering specifications., • Develop and maintain Siemens PLC programs using Step 7., • Support servo drive programming using Siemens Simotion and Scout software., • Configure and maintain HMI systems for automated production equipment., • Provide troubleshooting and technical support for automated production lines, including laser welding and stamping equipment., • Develop and maintain standard operating procedures and technical documentation for equipment operation and modification., • Work closely with project managers, engineers, and maintenance technicians to support equipment improvements and production reliability., • Participate in continuous improvement initiatives to enhance manufacturing processes and equipment performance., • Support multiple projects simultaneously while ensuring tasks are completed within defined timelines. Required Qualifications • Bachelor’s degree in Electrical Engineering or equivalent relevant work experience., • Experience with Siemens PLC programming using Step 7., • Experience with Siemens Simotion servo drive programming using Scout software., • Experience developing or supporting HMI programming for automated equipment., • Experience with industrial equipment installation and commissioning., • Strong troubleshooting and problem-solving skills in manufacturing environments., • Ability to work effectively in a team-oriented engineering environment., • Strong written and verbal communication skills., • Ability to manage multiple technical projects simultaneously. Preferred Qualifications • Knowledge of manufacturing production systems and continuous improvement methodologies., • Experience with laser welding or automated manufacturing equipment., • Experience with industrial automation and ladder logic programming. Thanks & Regards Archit Sharma Senior Associate – Recruitment – EST 609-353-5246 420 Lexington Ave, 30th FL. New York, NY 10170

What you will do: As a Union Apprentice, you will assist a journeyman fitter/welder to layout, assembly, install, and repair of HVAC systems, Hydronic Systems. These systems may consist of pipes, fittings, piping systems, fixtures and equipment for heating, cooling, gas, steam, lubricating, sprinkling, and industrial processing systems. Must be able to install quality work and have working knowledge of piping systems. Maintains the work area in a clean orderly condition and follows prescribed safety regulations. Maintains required tools, and properly uses all Personal Protection Equipment (PPE) and safety equipment. Perform a variety of manual tasks in varying temperatures for extended periods of time, which may include lifting light to heavy materials, climbing, standing, squatting, bending, and working at heights when applicable How you will do it: • Cut pipe, • Bevel and thread pipe, • Install pipe supports, • Install valves and instruments, • Material handling, • Operate lifts and other equipment What we look for: Required • High School Diploma or GED, • At least one years previous related experience, • Good written/verbal communication skills are necessary., • Available for Local Travel, • Trained and qualified to operate machinery such as scissor lifts, aerial lifts, fork lifts, etc, • One year of industry experience with piping layout, and installation of Hydronic Systems, • Knowledgeable in the field of cutting, Welding and layout Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit . Pay Range: hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ #TechHiring

What you will do: As a Union Journeyman Fitter/Welder, you are responsible for the layout, assembly, installation, and repair of HVAC systems, Hydronic Systems. Installs these systems according to specifications and appropriate trade and building codes. These systems may consist of pipes, fittings, piping systems, fixtures and equipment for heating, cooling, gas, steam, lubricating, sprinkling, and industrial processing systems. Must be able to cut, lay out, weld and assemble pipe and structural assemblies. Must be able to install quality work and have working knowledge of piping systems. Maintains the work area in a clean orderly condition and follows prescribed safety regulations. Maintains required tools, and properly uses all Personal Protection Equipment (PPE) and safety equipment. Perform a variety of manual tasks in varying temperatures for extended periods of time, which may include lifting light to heavy materials, climbing, standing, squatting, bending, and working at heights when applicable How you will do it: * Cut, assemble, weld, install, and lay out pipe * Bevel and thread pipe * Install pipe supports * Install valves and instruments * Material handling * Operate lifts and other equipment * Must be able to work with: Carbon steel, Stainless steel, Copper, PVC, Polypropylene What we look for: Required * High School Diploma or GED * At least two years previous related experience as a Pipefitter. * Must be familiar with a variety of the field's concepts, practices, and procedures. * Good written/verbal communication skills are necessary. * Available for Local Travel * Trained and qualified to operate machinery such as scissor lifts, aerial lifts, fork lifts, etc * Member of Local 142 Union Preferred * Three years of industry experience with piping layout, Hydronic calculations and installation of Hydronic Systems * Welding Certifications WPS 1-12-2 SMAW using E6010 followed by E7018 with PWHT Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit . Pay Range: hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ #TechHiring

Job Description Summary/Objective Our vision is that Pearl is the pioneering Plazamaker of North America through creating places and experiences to cultivate human connectedness. Every person who joins our organization is invited to join us in pursuing this vision and making Pearl the place to be. As Pearl continues to grow and expand our offerings, Pearl is expecting growth in people living, working, and enjoying all that is available in the neighborhood. Our team will add services to our portfolio in pursuit of the continued innovation and the service level that is associated with Pearl. While recognizing this growth, we will continue to focus on sustainability by providing solutions that can transform San Antonio and mixed use developments. The Facilities Technician I plays a mission-critical role in ensuring the safety, reliability, and long-term scalability of operations across the Pearl District. This role safeguards the physical environment by independently assessing, maintaining, and repairing essential building and mechanical systems, in adherence to processes, SOsP and light supervision and making timely decisions that directly protect people, assets, and business continuity. The Technician I where accurate diagnosis and decisive action are essential to prevent downtime and ensure safe performance. As a key steward of property conditions and infrastructure, this position supports the district’s growth by ensuring that facilities remain fully functional, safe, and ready to scale with future operational needs. Essential Functions Safety • Promote a safety-first culture by modeling safe behaviors and reinforcing expectations with others; Develop safety inspection scorecard, conduct random property inspections and share results with Facilities Supervisor., • Maintain safety as the top priority in all tasks, decisions, and work environments., • Identify, report, and eliminate hazards in real time to prevent accidents or equipment damage., • Conduct regular inspections to ensure safe conditions for employees, visitors, and vendors., • Adhere to Preventative Maintenance Schedule., • Assess, diagnose, and repair building and mechanical systems—including HVAC, electrical, and plumbing—with the (Competent) skill level., • Determine root causes of system failures and take action or escalate to resolve issues promptly., • Operate, maintain, and troubleshoot large equipment and critical systems in adherence to processes, SOPs and leader direction., • Perform preventive and corrective maintenance in alignment with Maintenance SOPs., • Monitor system performance and identify trends that indicate potential failure or inefficiency., • Maintain accurate operational records, logs, and documentation related to system performance and repairs. Property Management and Vendor Partnerships In partnership with Facilities Technician II: • Verify quality of vendor work, ensuring compliance with safety standards and operational requirements., • Maintain documentation of vendor activity, inspections, and service outcomes., • Collaborate with property management to prioritize maintenance needs and meet operational goals. Competencies Must have a working technical knowledge of one or more of the following systems: • Electrical, • HVAC, • Mechanical, • Plumbing, • Welding 1 Novice Needs Guidance, learning basics 2 Developing Performs tasks with occasional help 3 Competent Independently handles most tasks X 4 Advanced Strong technical leadership & expertise; Supervision minimal; decision making 5 Expert Master-level; trains and leads others Physical Demands • Moderate Noise, • May work in abnormal weather conditions depending on service/priority, • Work in a Confined Area, • Reaching (Overhead/At or Below Shoulder Level), • Bending/Twisting, • Fine/Gross Manipulation, • Kneeling/Crawling, • Prolonged Standing/Sitting, • Near/Far Visual Acuity and Peripheral Vision, • Stooping/Crouching, • Foot/Leg Controls, • Pushing/Pulling, • Lifting/Carrying 50lbs or more, • Climbing (Stairs, Ladders & Scaffolding) Required Education and Experience 4-7 years of facilities maintenance experience, or equivalent military/technical trades experience, with demonstrated competency in at least three core system (e.g., electrical, HVAC, mechanical, welding, or plumbing). Candidates must have proven ability to work independently, operate large commercial equipment unsupervised, and make informed technical decisions that balance safety, urgency, and long-term asset health. KPIs- (Key Performance Indicators) Maintenance SOPs for System(s) Operations Develop safety scorecard within 90 days of start date Downtime as measured by under 95% Preventative Maintenance Schedule (90% on time)

Job Description We are seeking a highly skilled and experienced Journeyman and Apprentice Plumbers with a minimum of 5 years of experience in commercial construction plumbing. The ideal candidate will be responsible for installing, maintaining, and repairing plumbing systems in commercial buildings, ensuring high-quality craftsmanship and compliance with industry standards. Key Responsibilities: • Install, repair, and maintain plumbing systems in commercial construction projects., • Measure, cut, and assemble pipes and fittings according to specifications., • Work with various plumbing materials, including PVC, copper, and cast iron., • Interpret blueprints, schematics, and technical drawings to determine project requirements., • Test plumbing systems for leaks and ensure compliance with local building codes., • Operate hand and power tools used in plumbing installation and repair., • Lead and supervise a small crew of apprentices and helpers, ensuring work is completed efficiently and to quality standards., • Collaborate with other trades to ensure seamless project completion., • Perform quality control checks and ensure compliance with all plumbing regulations and safety standards., • Valid Journeyman or Apprentice Plumbers License., • Minimum of 5 years of experience in commercial plumbing installation., • Strong knowledge of plumbing systems, installation techniques, and local plumbing codes., • Ability to read and interpret blueprints and technical specifications., • Experience working with various hand and power tools used in plumbing., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license., • Familiarity with local plumbing codes and regulations., • Experience with soldering, brazing, and welding plumbing components., • Strong problem-solving and organizational skills. Apply Now to get in contact with a recruiter! Company DescriptionWhat is INDUSTRY? We’re a construction company first, devoted to changing the way contractors staff their projects. We match qualified, proven professionals with the top construction opportunities in the business. This allows us to provide our clients with a diversified and superior workforce while creating a stable work environment for our employees.What is INDUSTRY?\r\nWe’re a construction company first, devoted to changing the way contractors staff their projects. We match qualified, proven professionals with the top construction opportunities in the business. This allows us to provide our clients with a diversified and superior workforce while creating a stable work environment for our employees.

Job Description DESCRIPTION The SSD Technician is responsible for the installation, adjustment and maintenance of all types of detention related equipment. RESPONSIBILITIES • Install and maintain equipment including, but not limited to, cylindrical, mortise, and rim locks, motor and manually driven detention equipment, detention locks, slider service and maintenance, • Install and maintain frames, doors, hardware, locks, sliders, furniture and door closers, • Install wire mesh, security ceilings and wall panels, • Install glazing and caulking, • Plan, install, service and test mechanical and electronic locking systems, • Make emergency repairs to detention and security locking systems, • Layout detention equipment for proper locations from construction documents and shop drawings, • Handle and distribute construction materials including doors, frames, glass, hardware, steel furniture and steel assemblies, • Troubleshooting hardware and Mechanical problems associated with Detention, • Be available for on call assignments, • All other related duties as assigned or required by Service Manager and/or Coordinator, • Open, repair and change the combination of all types of locking devices and makes keys for same, • Repair and maintain all types of doors, door closers, exit devices, panic hardware and related hardware, • Operate manual key coding/cutting machine, • Log keys that are issued and returned, • Assist with building maintenance tasks, such as plumbing, electrical or other essential building functions, • Lift up to 50lbs, • Communicate regularly and effectively as appropriate, • Maintain the standards, culture and values of CML Security, • High school diploma or GED required, • 3 Years of related experience preferred, • Welding experience preferred, • Alarm tech- intrusion systems preferred, • CCTV experience preferred, • Door access control preferred, • Data cable installations preferred, • Electronics experience preferred Pay: $25-$50 an hour Expected fill date: Ongoing hiring into 2026 Employment may be contingent upon successful completion of a background check and drug screen Company DescriptionOur team works alongside General Contractors and Architects to provide the best solutions for construction and design of detention facilities, often helping owners narrow down particular solutions needed for their individual project. Total Rewards include wages, eligibility for the company’s bonus program, medical insurance benefits, as well as more unique programs, including a 401k match, fitness reimbursement, tuition reimbursement, cell phone provider discount, employee referral bonus, employee assistance program, Elevations Credit Union membership, CML apparel reimbursement and access to CML’s Top Golf platinum membership. CML is an Equal Opportunity Employer We promote a safe workplace and provide regulatory compliance training as well as CML offers safety credential advancement.Our team works alongside General Contractors and Architects to provide the best solutions for construction and design of detention facilities, often helping owners narrow down particular solutions needed for their individual project.\r\n\r\nTotal Rewards include wages, eligibility for the company’s bonus program, medical insurance benefits, as well as more unique programs, including a 401k match, fitness reimbursement, tuition reimbursement, cell phone provider discount, employee referral bonus, employee assistance program, Elevations Credit Union membership, CML apparel reimbursement and access to CML’s Top Golf platinum membership.\r\n\r\nCML is an Equal Opportunity Employer We promote a safe workplace and provide regulatory compliance training as well as CML offers safety credential advancement.

Job Description Collaborative and Results-Driven Sheet Metal Fabricator - Installer Wanted! Our dedicated team at Diamondback Mechanical Group is hiring a full-time installer who's ready to perform high-quality hands-on work and take the first steps toward building a skilled trade career. This entry-level role with our San Antonio, TX team will contribute to impressive projects that keep customers safe and comfortable. Keep reading to see if you'd be the right fit! YOU'LL GAIN: • Experience-based pay, • Medical, dental, and vision insurance, • Paid time off (PTO), • Paid holidays, • Company-provided truck, phone, iPad, and uniforms, • Employee discounts YOUR DAY COULD INCLUDE: • Following blueprints and technical drawings, listening to instructions, and complying with all quality/safety procedures, • Correctly fabricating, assembling, and installing sheet metal products and HVAC ductwork according to specifications, • Using various hand and power tools to measure and mark materials, trim and smooth joints, and grind rough surfaces, • Soldering, welding, and caulking joints and seams, • Installing pipes, flashings, HVAC ductwork, rain gutters, furnace casings, and more, • Ensuring assembled HVAC systems are efficient and made with the correct materials, • Safely loading, unloading, and transporting materials and ductwork, • Holding ductwork while lead installers secure it, • Cleaning the work area, organizing tools, setting up ladders/scaffolding, and other entry-level tasks as assigned SHEET METAL FABRICATOR - INSTALLER QUALIFICATIONS: • Ability to lift heavy tools (50 to 100 lbs.), work in all temperatures, and regularly bend/climb/squat throughout the day, • Ability to accurately read and follow blueprints and drawings, • Team spirit and the ability to follow instructions, • Excellent math skills, • Familiarity with tools like tin snips, tape measures, and impact drills, • High school degree or GED Preferred Criteria: • 1+ years of sheet metal-related experience, • OSHA 10 certification (or higher), • Working knowledge of building codes and regulations JOIN US! Diamondback Mechanical Group: AC, Heating & Refrigeration is a locally-owned company that has been providing quality heating and cooling services to our community and the surrounding areas for years. We take pride in providing the best for our customers by offering the highest quality workmanship in the installation, repair, and replacement of heating, air conditioning, and refrigeration systems. For us, the customer always comes first, and we look to make repairs before making sales. Do we sound like the kind of team you want to be a part of? Fill out our initial application and become our Sheet Metal Fabricator - Installer!

Note: This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the trades and industry job market. Are you ready to build a hands-on career path in the trades and industry sector? Dreambound offers practical training programs that will equip you with the skills needed for various high-demand roles in skilled trades and technical industries. What programs are available? We offer specialized trade and industry training programs depending on your location, including: • Electrical Engineering, • HVAC, • Gunsmith, • Automotive Service Technician, • Cosmetology, • Tower Technician, • Welding, • Construction Manager, • Aviation Maintenance Technician, • Esthetician You'll receive hands-on training and comprehensive instruction to prepare you for certification (if relevant) and the trades and industry job market. Highlights : • Complete in as short as just a few weeks, • Flexible online and in-person options available This is an educational opportunity that requires a financial investment. Cost varies per partner school, but payment plans and / or financial aid may be available to those who qualify. Take the first step towards your new career path today!

Job Description Position Summary This position will perform a wide variety of preventative and corrective maintenance and repairs on commercial kitchen equipment, dish equipment, plumbing and electrical equipment on board mobile units, i.e. kitchen trailer. The daily tasks include troubleshooting and diagnosing problems to equipment or systems located on the asset trailers, repairing various items of mechanical, plumbing, or electrical nature, and assessing the assets for needed maintenance. This position will utilize several trade skills such as commercial kitchen equipment, refrigeration, carpentry, electrical, plumbing, painting, roofing, welding, heating and cooling. (Frequent Travel) Key Responsibilities • Perform general maintenance, installation, repairs, and service on commercial kitchen equipment, dishwash machines, walk in or counter coolers, water heaters, plumbing and electrical systems, • Perform equipment and systems inspections, prepares and submits reports of conditions and recommend actions to be taken, • Act as point of contact for trucks, trailers as they deliver or pick up assets from the yard, i.e. escort drivers, load or unload trailers, manipulate trailers or assets in the yard to park incoming trailers, • Responds to service requests with little or no supervision, • Communicate with team leaders throughout the day via messaging and verbally to provide status updates, • Complete work requests in a timely and professional manner, • Effectively work with hand/power tools, ladders, pallet jacks, electronic tools, • Works as a contributing member of the team to provide the best service and maximize time management, • Support after-hours and weekend hours needs as required Required Skills & Qualifications • Must possess and maintain a valid driver’s license with an acceptable driving record, • Considerable knowledge in working with commercial kitchen equipment, refrigeration, mechanical, plumbing, electrical, and structural systems, • Ability to push, pull heavy equipment on a regular basis, • Ability to perform and manage technically complex projects using independent judgement and personal initiative, • Aptitude for organizing tasks, managing time, and prioritizing projects, • Skill to apply principles of rational systems, • Ability to utilize and interpret a variety of advisory data and information such as technical drawings, plans, specifications, and manuals, • Ability to exercise independent judgement to apply facts and principles for developing approaches and techniques to problem resolution, • Ability to exercise judgement, decisiveness and creativity in situations involving a variety of generally pre-defined duties which are often characterized by frequent change, • Ability to communicate effectively, both verbally and in writing, • Ability to work in a team environment; contribute as a team member and treat coworkers, staff, clients, and vendors with respect, • Ability to build and cultivate professional relationships with internal staff and external partners, • Ability to offer flexibility and adaptability Physical & Work Environment Requirements • Ability to travel to sites in and out of state as needed to help troubleshoot or repair assets, • Ability to work safely in varying environmental conditions, including extreme temperatures, wind, dust, and active job site environments, while maintaining compliance with safety standards and operational procedures, • Occasional walking uneven terrain and site inspections, • Flexibility to work extended hours during project builds and dismantlesCompany DescriptionThe RK Group started changing the event-dining landscape in Texas 80 years ago with fresh ingredients, innovative menus, and attention to detail in every appetizer, entrée and dessert we serve. That tradition continues to this day, as does catering to our clients’ every need and dedication to exciting palates while exceeding expectations.The RK Group started changing the event-dining landscape in Texas 80 years ago with fresh ingredients, innovative menus, and attention to detail in every appetizer, entrée and dessert we serve. That tradition continues to this day, as does catering to our clients’ every need and dedication to exciting palates while exceeding expectations.

Job Description Arepet Industries, LLC has an immediate opening for a Dry Plant Operator at our Von Ormy plant. Job Description: We are seeking a dedicated and skilled Dry Plant Operator to join our team. As a Dry Plant Operator, you will play a crucial role in the production process, ensuring the efficient operation of machinery used in the drying and processing of materials. You will be responsible for maintaining equipment, monitoring production processes, and adhering to safety protocols to ensure the highest quality product is consistently delivered to our customers. Key Responsibilities: • Operate Dry Plant Machinery: Efficiently operate and control drying equipment, including but not limited to dryers, conveyors, and associated machinery., • Monitor Production: Continuously monitor production processes to maintain product quality and maximize efficiency. Adjust equipment settings as needed to meet production goals., • Equipment Maintenance: Perform routine maintenance and minor repairs on machinery to prevent downtime and ensure safe and optimal operation. Report any maintenance needs or malfunctions promptly., • Quality Control: Inspect materials and products at various stages of the drying process to ensure they meet quality standards. Take corrective actions when necessary., • Safety Compliance: Adhere to all safety protocols and guidelines, including the proper use of personal protective equipment (PPE). Promote a safe working environment for yourself and colleagues., • Documentation: Maintain accurate records of production data, equipment maintenance, and any incidents or issues that may arise during your shift., • Team Collaboration: Work closely with other members of the production team, including supervisors and maintenance staff, to coordinate activities and achieve production targets., • Continuous Improvement: Identify opportunities for process improvement and contribute ideas for enhancing productivity, efficiency, and safety.Knowledge Skills and Abilities, • Must be able to work 12-hour shifts, weekends, overtime and holidays as needed, • Must be able to read and write in English, • Must be able to wear all required safety equipment, • Must be able to communicate with hand signals and warning sounds, with coworkers regarding movement of vehicles and mobile equipment, • Must be service oriented with proven ability to work in a TEAM environment, • Must be able to follow instructions as well as make some independent decisions, • Must be able to perform duties in a safe and environmentally responsible manner, • Mechanical/welding knowledge preferredPhysical Requirements, • This job requires the ability to wear a hard hat, safety glasses, steel-toed shoes, half mask respirator, • Must be able to climb stairs and ladders on a repetitive basis, • Must be able to stoop, bend and lift 50 lbs from ground to waist level on a repetitive basis, • Must work outside in all weather conditions consistent with extreme ambient temperatures: heat, cold, wetness, dryness, dust, SAND and noisy conditions, • Must be able to work at various heights, • Must have good hand/eye coordination and be able to operate hand/foot controls, • Possess good vision to perceive depth at close range and distances up to 150 feetEducation and Experience, • Prior Dryer Operator experience preferred, • High school diploma or GED preferred, • Heavy equipment experience preferred

Job Description Classification: Non-Exempt We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230-volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job Description Company Info Circular Services, the largest privately held recycling and organics provider in the U.S., strengthens this mission through its national scale and long-term municipal partnerships. It operates over 25 facilities serving major long-term municipal and commercial contracts. The mission of Circular Services is to keep valuable materials in circulation and minimize the cost and environmental impact of landfills. The company services municipal contracts with some of the largest and fastest growing cities in the U.S. including New York City, Austin, San Antonio, and Phoenix. About the Role: The Plant Maintenance Mechanic C is responsible for the maintenance and upkeep of the company’s equipment, building and grounds in a manner that minimizes interruptions in operations and assures employee safety. This position is responsible for implementing developed programs to extend equipment life and reliability and to assure safe operations at every level. The Maintenance Mechanic C reports to the Maintenance Manager. Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. • Initiates requisition for maintenance and repair supplies in sufficient quantity to meet needs of production, building maintenance equipment, materials, and supplies, • Performs building and equipment repairs throughout the property according to submitted work orders, • Develops and supervises implementation of maintenance programs to include preventative maintenance that extend equipment and building life and reliability as well as assure safe operations at every level, • Uses the Circular Services Preventive Maintenance System to manage the periodic maintenance of buildings, equipment, and grounds at the facility., • Inspects plant machinery and equipment. Able to supervise repairs and services on all equipment in accordance with the facility Standard Operating Procedures, equipment maintenance manuals, and Circular Services policies and training. Must also be knowledgeable to manage non-routine repairs or issues that may arise and require sound, immediate judgment without direct supervision., • Implements Circular Services safety policies and practices for all work activities, and ensures these practices are followed by other Circular Services staff, vendors, contractors, and visitors entering the facility and all work is done to standard., • Completes all mandatory training activities for both safety and operational training as assigned by management., • Procures plant supplies and replacement equipment in an efficient manner by identifying needs in advance, managing and inventory of spare parts inventory., • Screening and selection of building maintenance materials and supplies, • Researches pricing of equipment and supplies to identify superior pricing, • Prioritizes work orders for completion in a systematic and efficient manner when no direct guidance is given, • Initiates work orders for work done in facility, • Conducts daily testing of equipment and inspection of the warehouse, • Cross-trains in other areas of the business and assist in those areas as needed., • Occasional mandatory overtime Minimum Job Qualifications: • High degree of attention required to prevent injury to others; promote a safe work environment, • Able to follow instructions for operating equipment and record keeping, • Able to execute assignments in an accurate, timely and safe manner, • Knowledge of HVAC, plumbing and electrical systems (both ac and dc current), • Read and interpret engineering piping and instrument drawings, electrical diagrams and schematics, and electrical logic diagrams, • Conveyor belt repairs and replacement., • Welding certification and/or welding experience, • At least 5 years’ experience in maintaining maintenance facilities, equipment, and tools, • Ability to troubleshoot, identify the problem, determine the cause and repair as needed, • Working knowledge and experience with multiple hand tools and power tools, • Ability to operate/drive a powered pallet jack and forklift, scissor lift and truck, • Knowledge of Computers and CMMS programs Normal work environment is a recycling plant, with exposure to all weather conditions, dirt, high levels of noise, smells/odors and at times exposure to dangerous and/or toxic substances requiring necessary precautions, including PPE. The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Required to use motor coordination with arms, hands, fingers, and legs., • Required to engage in physical activity that includes pushing, pulling, bending, and lifting objects more than 80 pounds., • Required to work from ladders or raised platforms., • Required to stand or work on concrete floors most of the workday., • Will be exposed to a physical environment, which involves dirt, odors, noise, weather extremes or similar elements most of the workday., • Paid Parental Leave, • Health insurance, • Dental insurance, • Vision insurance, • HSA/ FSA, • Paid time off, • Employee Assistance Program, • 401k matching, • Tuition Reimbursement EEOC: Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.

Job Description Job Title: Engineering (Inventory) Technician Job Summary Responsible for maintaining clean work areas, managing equipment and inventory, and supporting various plant operations including construction, installation, and maintenance activities. Key Responsibilities • Clean work areas and maintain parts, equipment, and inventories, • Construct plastic containment systems using Unistrut, • Maintain equipment and vehicles, • Install and remove insulation, • Deliver packages as needed, • Assist with welding, cutting, wiring, and installation, • Support drawing-related activities, • High school diploma or equivalent, • Hands-on experience with mechanical and electrical systems, • Ability to use hand tools and power tools, • Troubleshooting and problem-solving experience preferred, • Computer experience with Excel and Word, • Experience with demonstration scale operation preferred, • Experience working with chemicals preferred, • Minimum of 4 years of experience required, • Monday through Friday, 8:00 AM to 5:00 PM, • Shift work may vary and may include 24/7 schedules, • Work performed in plant, lab, or high-bay environments, • Requires standing, walking, climbing stairs and ladders, • Work performed outdoors in varying weather conditions, • Worksites located across a 1,500-acre property; walking between sites required, • Must wear steel toe shoes, • Hard hat required, • Must submit to a Motor Vehicle Record (MVR) check, • Position is considered safety-sensitive, • Dress code: collared shirt and jeans Join the Cross Resource Group Team! At Cross Resource Group, we value our employees and are dedicated to providing a rewarding and inclusive work environment. We are proud to offer a competitive and comprehensive benefits package to meet the diverse needs of our team. Employee Benefits Include: Healthcare Insurance: Comprehensive coverage to ensure access to quality healthcare. Dental Insurance: Robust coverage for optimal oral health. Vision Insurance: Regular exams and corrective lenses covered. Disability Insurance: Short and long-term coverage protecting against loss of income due to illness or injury. Life Insurance: Providing financial security and peace of mind for our employees and their loved ones. Why Choose Us?

Job Description As a part-time Maintenance Technician for Farmington Commons, you will be responsible for Site Maintenance, included but are not limited to assisting with maintenance tasks for the Association as needed, employing knowledge and skills effectively and efficiently as well as learning new skills on the job, as required to complete maintenance tasks. Additional tasks may include performing facility inspections and formulating maintenance schedules and implementing cost-saving measures and solutions to enhance the overall performance of Association infrastructure. Many candidates joining our company have experienced previous success in areas such as property maintenance, and administrative or task/project management roles; they are able to work independently with some supervision and direction. Who are we? Alamo Management Group is a local homeowners association, or HOA, management company with a focus on being a unique place of employment. We are customer service centered, with strong family and neighbor values. We do not want to be like other companies, and our belief is that by creating an amazing customer experience will we achieve long-term success. At AMG we are enthusiastic about the growth of our employee’s skillset and the culture that we uphold in the workplace. While working at AMG you will find yourself learning something new and useful every day. Industry experience is preferred but not required to be successful at AMG, we want to grow with you! We pride ourselves in our determination to change the negative stigma if HOAs. To achieve this, we look for employees who are ready to learn, able to take on challenges and strive to provide the best customer experience to our vendors, developers, and residents. Are you an adaptive learner? Are you ready to take on challenges? Are you passionate about customer experience? Are you energetic? Then consider joining the fastest growing local management company in Texas! Responsibilities: Maintenance Assistance: • Assist with maintenance tasks for the Association as needed., • Utilize knowledge and skills effectively and efficiently to complete maintenance tasks., • Collaborate with the Community Manager, • Formulate maintenance schedules based on inspection findings., • Implement cost-saving measures and solutions to improve the overall performance of Association infrastructure., • This description is not intended to compile a complete list of all tasks that may fall under the purview of the role, and may be revised from time to time, as necessary. Eligibility Requirements: • Education: High school or equivalent, • Experience: At least 1 year property maintenance, including electrical, plumbing, welding experience, • License/Certification: Driver's License, • Property management/maintenance experience, • Professional experience in community management or maintenance, • Professional experience with vendor management

Job Description Join the Utilities Division at Capital Electric Today! We're excited to announce an opportunity at our employee-owned construction company. The Utilities Division is seeking a skilled and experienced Infrastructure Laborer to support our team in San Antonio, TX. In this role, you'll play a crucial part in ensuring that all Utilities Infrastructure projects are completed efficiently, on time, safely, and within budget, while working alongside a skilled team and adhering to quality and regulatory standards. If you're a dedicated professional ready to take on challenges and responsibility in a fast-paced and rewarding environment, we want to hear from you! WHO WE ARE: Named a 2024 Top Workplace, Capital is a dynamic and innovative employee-owned construction company that values collaboration, quality, and client satisfaction. As a 100% employee-owned organization, we take pride in our collective achievements and prioritize creating opportunities for professional growth. We've grown from providing electrical services to offering a full range of solutions, including electrical, utility, general construction, construction management, and 24-hour plumbing and electrical service/maintenance. With a proven reputation as a highly specialized contractor, we proudly serve the Federal Government, state agencies, local municipalities, and commercial clients across the greater San Antonio area. JOB SUMMARY: The Utilities Division is looking for an experienced Infrastructure Laborer to support the Utilities team in performing a variety of manual labor tasks in support of utility services, including maintenance and construction. RESPONSIBILITIES: · Manually dig trenches for underground utility lines using shovels and by hand as required. · Haul dirt, sand, and grass using wheelbarrows. · Spread and level dirt and sand. · Perform site clean-up duties such as: Sweeping, shoveling, throwing away trash, using power washer to clean driveways and sidewalks. · Operate hand and power tools. · Load and unload miscellaneous materials used at the jobsite. · Flagging traffic passing near, in, or around work zones. · Carry out safety policies in place to avoid site hazards (setting up cones, moving material and equipment off driveways and sidewalks, wearing required PPE). · Perform other laborer duties as instructed by the supervisor. · Follow all safety policies and guidelines set by HJD Capital Electric. MINIMUM REQUIREMENTS & QUALIFICATIONS: · 1 year of experience working as a Utility Laborer. · Basic knowledge and experience operating hand and power tools. · Must have reliable transportation. · Experience working outdoors in extreme weather conditions (heat and cold). · Physical capability to carry up to 50 lbs. and perform manual labor. · Strong attention to detail and initiative to perform additional tasks when needed. · Must have a safety-first mindset to identify and mitigate potential hazards. · Preferred: Valid CDL holder. · Preferred: Underground utility experience. · Preferred: Heavy equipment operating skills. · Preferred: Carpentry or welding skills. WHY JOIN US? At Capital Electric, we're proud to offer our employees a supportive and rewarding environment: · Comprehensive Benefits: Medical, Dental, and Vision Insurance. · Paid Time Off: PTO and holiday pay. · Employee Ownership: Eligibility for ESOP (Employee Stock Ownership Plan), giving you shares and ownership in the company. · Additional Perks: 401(k) with company match, Health Savings Account, Life Insurance, Short-Term and Long-Term Disability, Critical Illness, and Hospitalization Indemnity Coverage.

Job Description Join the Utilities Division at HJD Capital Electric Today! We're excited to announce an opportunity at our employee-owned construction company. The Utilities Division is seeking a skilled and experienced Laborer, with a CDL, to support our team in San Antonio, TX. In this role, you'll play a crucial part in ensuring that all Utilities projects are completed efficiently, on time, safely, and within budget, while working alongside a skilled team and adhering to quality and regulatory standards. If you're a dedicated professional ready to take on challenges and responsibility in a fast-paced and rewarding environment, we want to hear from you! WHO WE ARE: Recently named a 2025 Top Workplace, HJD Capital is a dynamic and innovative employee-owned construction company that values collaboration, quality, and client satisfaction. As a 100% employee-owned organization, we take pride in our collective achievements and prioritize creating opportunities for professional growth. We've grown from providing electrical services to offering a full range of solutions, including electrical, utility, general construction, construction management, and 24-hour plumbing and electrical service/maintenance. With a proven reputation as a highly specialized contractor, we proudly serve the Federal Government, state agencies, local municipalities, and commercial clients across the greater San Antonio area. JOB SUMMARY: The Utilities Division is looking for an experienced Utility Laborer, with a CDL, to support the Utilities team in hauling equipment and materials to and from job sites and in performing a variety of manual labor tasks in support of utility services, including maintenance and construction. RESPONSIBILITIES: • CDL Driver – Haul equipment, Dump Trailer, Hydrovac, material, etc., • Manually dig trenches for underground utility lines using shovels and by hand., • Haul dirt, sand, and grass using wheelbarrows., • Spread and level dirt and sand., • Perform site clean-up duties such as: Sweeping, shoveling, throwing away trash, using power washer to clean driveways and sidewalks., • Operate hand and power tools., • Load and unload miscellaneous materials used at the jobsite., • Flagging traffic passing near, in, or around work zones., • Carry out safety policies in place to avoid site hazards (setting up cones, moving material and equipment off driveways and sidewalks, wearing required PPE)., • Perform other laborer duties as instructed by the supervisor., • Follow all safety policies and guidelines set by HJD Capital Electric. MINIMUM REQUIREMENTS & QUALIFICATIONS: • 1 year of experience working as a Utility Laborer., • Basic knowledge and experience operating hand and power tools., • Must have reliable transportation., • Experience working outdoors in extreme weather conditions (heat and cold)., • Physical capability to carry up to 50 lbs. and perform manual labor., • Strong attention to detail and initiative to perform additional tasks when needed., • Must have a safety-first mindset to identify and mitigate potential hazards., • Required: Valid CDL holder., • Preferred: Underground utility experience., • Preferred: Heavy equipment operating skills., • Preferred: Carpentry or welding skills. WHY JOIN US? At HJD Capital Electric, we're proud to offer our employees a supportive and rewarding environment: • Comprehensive Benefits: Medical, Dental, and Vision Insurance., • Paid Time Off: PTO and holiday pay., • Employee Ownership: Eligibility for ESOP (Employee Stock Ownership Plan), giving you shares and ownership in the company., • Additional Perks: 401(k), Health Savings Account, Life Insurance, Short-Term and Long-Term Disability, Critical Illness, and Hospitalization Indemnity Coverage.

Job DescriptionAre you looking for a stable, non-rotating shift job with a Toyota Supplier in San Antonio? This Entry-Level Automotive Production role offers you the chance to gain skills, grow your experience, and transition to a permanent position in just 90 days!If you're looking for a hands-on opportunity with a steady schedule and a chance to grow your career, apply today! Responsibilities: • Machine Operator Spot WeldingLearn to operate spot-welding machines with the support of the company. You’ll load metal sheets into the machine, monitor the robotic arm's work, check the quality of parts, and stack products. This role involves repetitive motions and standing for the duration of your shift., • Warehouse LogisticsWork with your hands in a fast-paced environment, collecting and loading parts while learning the facility's logistics. You’ll gather finished parts, load them into carriers, and deliver them to the main plant. Help unload tools and materials to keep operations running smoothly., • Stamping Machine OperatorsJump into a high-energy department where you’ll learn about the plant’s stamping processes. Catch and quality check metal pieces exiting the machines, and stack them consistently for delivery to the welding department. You’ll play a key role in keeping production flowing smoothly. Requirements:, • Valid driver’s license and car insurance to pass Toyota plant security. If you don’t drive, you’ll need a licensed and insured driver to transport you., • Ability to pass a drug screening., • Comfortable working in a fast-paced, industrial environment with long shifts (10-12 hours)., • Must be able to work in an environment that requires standing, bending, and moving materials., • Steel-toe boots (or ability to purchase them)., • Able to attend orientation at 6:30 AM on your first day., • Vehicle transportation required—no bus service to the location. Schedule:, • Monday - Friday (Saturdays may be necessary), • 1st Shift- 6:30AM - 3:45PM (Shift times can vary, there are times you might work as late as 6:30PM), • 2nd Shift- 6:30PM - 3:45AM (Shift times can vary, there are times you might work as late as 6:30AM) Pay Rate:, • 1st Shift- $15.50, • 2nd Shift- $16.50Company Incentives:, • Perfect Attendance Get rewarded for showing up! Earn an extra $50 every two weeks when you maintain Perfect Attendance. That means no absences, no tardies, no leaving early, no PTO, and working Saturdays if required. Location:

JOB TITLE - Bulk/Fleet Mechanic MATHESON one of the nation's leading bulk suppliers of liquefied gases. Our Diesel Mechanics perform repairs and scheduled preventative maintenance in accordance with DOT standards on both our tractors and cryogenic trailers. Other duties will include maintaining shop parts, ordering and inventory control, tire repairs/changes, light vehicle electrical and some welding. The ideal candidate will be able to problem solve and be flexible to the ever-changing environment of the Cryogenic and Transportation industries. With MATHESON, you are moving your career in the right direction! Knowledge, Skills and Abilities Good knowledge of quality management systems, FDA Vol 40 and CMGP; experience in change management are a plus but not required Strong Knowledge of DOT and Safety Regulations Basic computer skills along with written and oral communication skills Product line knowledge LIN/LOX/LAR preferred but not required Prefer welding expertise with aluminum and stainless to include TIG Hydraulic system background preferred Preferred diagnostic background to include Cummins, Detroit Diesel, Eaton Transmission and International Engines Required for All Jobs Performs other duties as assigned Complies with all policies and standards Education High school graduate with additional training such as technical school classes. Work Experience Preferred 1-3 years - 2 years' diesel mechanic experience / highway equipment maintenance or relevant training from a Technical School. Essential Functions Willingness to work outdoors Ability to lift 75 pounds Ability to bend, climb into cabs of trucks, use tools and power tools Ability to work extended hours as business needs dictate On call nights, weekends and holidays as required Provide own hand tools and chest with tools up to 1-1/4" Licenses and Certifications DOT air brake certification and annual federal vehicle inspection certification Class A CDL with Hazmat/Tanker Endorsements is preferred but not required Must be willing to get Class A CDL with Hazmat/Tanker Endorsements Matheson is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability

PRIMARY DUTIES AND RESPONSIBILITIES • MIG, TIG, and stick welding with the ability to pass a weld test., • Fabricate production machinery per print and /or verbal instructions., • Create jigs and fixtures for weldments., • Install new equipment and machinery., • Basic anchoring and rigging skills., • Maintain equipment and tools by performing Inspections and Preventive Maintenance., • Knowledge of mechanical, electrical, pneumatic, and hydraulic systems., • Wear appropriate PPE., • Comply with all company and HSE policies, guidelines, and procedures., • Ability to work overtime and shift work as required., • 5 years related experience., • Standing and walking up to 12 hours daily., • Lifting up to 50 lbs regularly., • Travel less than 10%., • Dependable, punctuality and excellent attendance.\n Qualifications: • MIG, TIG, and stick welding experience, • Experience fabricating production machinery per print., • Experience maintaining and troubleshooting equipment., • Knowledge of mechanical, electrical, pneumatic, and hydraulic systems is a plus.\n We offer a competitive benefits package starting first date of employment that includes: medical, dental, vision, life insurance, 401K savings plan, paid time-off, and starting at 3 weeks of vacation! For more specifics please visit our benefits page

PRIMARY DUTIES AND RESPONSIBILITIES • MIG, TIG, and stick welding with the ability to pass a weld test., • Fabricate production machinery per print and /or verbal instructions., • Create jigs and fixtures for weldments., • Install new equipment and machinery., • Basic anchoring and rigging skills., • Maintain equipment and tools by performing Inspections and Preventive Maintenance., • Knowledge of mechanical, electrical, pneumatic, and hydraulic systems., • Wear appropriate PPE., • Comply with all company and HSE policies, guidelines, and procedures., • Ability to work overtime and shift work as required., • 5 years related experience., • Standing and walking up to 12 hours daily., • Lifting up to 50 lbs regularly., • Travel less than 10%., • Dependable, punctuality and excellent attendance.\n Qualifications: • MIG, TIG, and stick welding experience, • Experience fabricating production machinery per print., • Experience maintaining and troubleshooting equipment., • Knowledge of mechanical, electrical, pneumatic, and hydraulic systems is a plus.\n We offer a competitive benefits package starting first date of employment that includes: medical, dental, vision, life insurance, 401K savings plan, paid time-off, and starting at 3 weeks of vacation! For more specifics please visit our benefits page

PRIMARY DUTIES AND RESPONSIBILITIES • MIG, TIG, and stick welding with the ability to pass a weld test., • Fabricate production machinery per print and /or verbal instructions., • Create jigs and fixtures for weldments., • Install new equipment and machinery., • Basic anchoring and rigging skills., • Maintain equipment and tools by performing Inspections and Preventive Maintenance., • Knowledge of mechanical, electrical, pneumatic, and hydraulic systems., • Wear appropriate PPE., • Comply with all company and HSE policies, guidelines, and procedures., • Ability to work overtime and shift work as required., • 5 years related experience., • Standing and walking up to 12 hours daily., • Lifting up to 50 lbs regularly., • Travel less than 10%., • Dependable, punctuality and excellent attendance.\n Qualifications: • MIG, TIG, and stick welding experience, • Experience fabricating production machinery per print., • Experience maintaining and troubleshooting equipment., • Knowledge of mechanical, electrical, pneumatic, and hydraulic systems is a plus.\n We offer a competitive benefits package starting first date of employment that includes: medical, dental, vision, life insurance, 401K savings plan, paid time-off, and starting at 3 weeks of vacation! For more specifics please visit our benefits page

Job DescriptionDescription: Would you like to work for a stable company who offers overtime, weekly paycheck and full benefits? We ARE that company! Come join our TEAM! Description This individual will maintain production and quality by ensuring a safe, reliable and DOT compliant operation of the Fleet’s commercial trucks and trailers by having a good knowledge & skills of mobile maintenance, troubleshooting, PM service and work order execution. This position reports directly to the Fleet Manager but also works closely with other departments such as Logistics, Plant Management and Safety Department to ensure a total approach to mobile maintenance & reliability are achieved when it comes to mobile Asset Health & Utilization. Such work must be held while upholding a high standard applicable to safety, TSIMCO guidelines/procedures and applicable state and federal regulations as mandated for our type of operation, including but not limited to appropriate environmental guidelines. ESSENTIAL RESPONSABILITIES AND TASKS • Ensures operation of commercial trucks and trailers by completing preventive maintenance requirements on engines, hydraulics, transmissions following manufacturer’s instructions and engineering specifications, • Perform diagnostics prior doing any repairs to ensure the right parts are purchased/replaced and the right repairs are performed, • Follow paper-flow procedures by documenting all repairs on work orders and follow parts ordering procedures., • Conserves mobile maintenance resources by using equipment and supplies as needed to accomplish job results, • Provides mobile maintenance information by answering questions and requests, • Prepares mobile maintenance documents by collecting, analyzing and summarizing information in concordance with industry guidelines, • Maintains safe and clean working environment by complying with company procedures, rules and regulations., • Contributes to team effort by accomplishing related results as needed., • Diagnose, adjust, repair commercial equipment and hydraulics, • Diagnose cause of any malfunction and perform repairs on commercial equipment including engines, transmissions, clutch adjustment, brakes, suspension and steering, fuel and ignition, electrical systems, DEF/DPF diagnose and repair, sensors, injectors, EGR repairs and diagnostics etc., • Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturer’s specifications, • Clean, lubricate and perform other routine maintenance work on all commercial equipment and company vehicles., • Perform repair work on vehicles such as breakdowns, malfunctions and emergency roadside repair in a safe, efficient, and quality manner. A final operational test on all vehicles will be performed after all requested repairs are done, to ensure quality-check and DOT compliance., • Perform preventive maintenance on equipment such as lubrications, adjustments and safety inspections., • Examine vehicle to determine if any additional safety or repair work is needed. PHYSICAL ASPECTS • Must be able to lift up to 50 lbs, • Must be able to walk comfortably up to a mile daily, • Will be required frequently to push, pull and climb ladders, • Requires balance and equilibrium when climbing ladders; walking platforms or support equipment in elevated areas., • Regularly requires use of both hands for grasping and fine manipulations for repetitive motion Will frequently be exposed • Wet or humid conditions, • Work near moving mechanical parts, • Outdoor weather conditions Job Type: Full-time Pay: $16.00 - $20.00 per hour Requirements: MINIMUM QUALIFICATIONS • CDL Class A - Preferred, • High School Diploma, • Diploma or Certification in Diesel & Heavy Equipment Repairs preferred, • Minimum of 5 years of experience, • Operations of heavy and commercial equipment, • Good general working knowledge of mobile maintenance equipment tools and diagnostic systems, • Basic knowledge in cutting and welding is a plus, • Good communication skills: verbal and written in English, • Knowledge in Reliability Centered Maintenance Analysis is a plus, • Knowledge in mobile maintenance procedures & work order execution, • Familiar with hydraulics, electrical & PM development & execution, • Proficient in the use of safety equipment to include but not limited to: fall protection, respirators and PPE, • Must be able to operate company handheld device, also must learn how to operate the DVIR app, so can keep track with all defects found on driver’s PTIs ca get them repaired in a timely manner.

Job Description Division: 133 - SAN-SVC Position: Service Technician Reports To: Branch Manager Employee Type: Full-time Pay Range: $22.00-$32.00 an hour Job Summary A field service technician will provide quality installation, inspections, maintenance and repair service for hoist and crane equipment. A field service technician will also uphold the highest level of professional integrity and ethics as required to instill customer confidence and continued success in service. Essential Duties · Troubleshoot, repair and inspect overhead cranes and hoists, below the hook devices and other lifting devices. · Perform scheduled preventive maintenance activities on equipment. · Support customers by effectively interfacing with customer and office in repairing equipment as needed. · Evaluate and make recommendations regarding required repairs for customers. · Maintain rapport with customers by examining complaints; identifying solutions; suggesting improved methods and techniques; and recommending system improvements. · Service overhead crane systems by performing quality installations; performing OSHA/ANSI equivalent inspections; documenting and completing warranty work; troubleshooting breakdowns; performing preventive maintenance; and responding to emergency service/breakdown calls. · Document service and installation actions by completing forms, reports, and inspection checklist. · Builds and maintains customer confidence by maintaining good response time, informing customer of problems, and completing the job in a timely manner. · Maintain professional presentation, timeliness, appearance, and organization in all areas. Key Performance Indicators (KPIs) Indicators of success and satisfactory job performance will include but may not be limited to: · TBD Other subjective factors considered in assessing job performance include the ability to balance applied expertise and knowledge with “soft skills” such as interpersonal skills, communication ability, aptitude for learning and adaptation, computer skills, abstract and conceptual thinking, and accurate planning and prediction of operational activities. Required Skills and Knowledge · Ability to work under pressure and deadlines · Ability to work independently. · Ability to work well with others. · Ability to fabricate and weld structures (structural welding only if certified). · Ability to perform inspections to OSHA/ANSI criteria · Ability to troubleshoot electrical circuits, single or three phase and AC or DC. · Ability to assemble and repair complex machinery. · Excellent communication skills. · Ability to work at heights. · Willingness to travel. · Safety oriented. · Maintain confidentiality. · Quality and results driven. · Good driving record. · Ability to drive a service truck with a trailer. · Ability to drive in in-climate weather including but not limited to rain, sleet, snow, high wind, and icy conditions. · Ability to drive at night. · Ability to use hand tools, power tools...etc. · Ability to lay out column spacing for new installs. Supervisory Responsibility This position does not have supervisory responsibilities. Work Environment and Equipment Used This job operates in a field environment. Equipment used includes hand tools; power tools; lift equipment; material handling equipment, ear plugs, steel-toed shoes, gloves; safety glasses, lanyard and body harness. · 50% Indoor 50% Outdoor. Good ventilation, noise Occasional to Continuous Physical Demands Occasional=1-33% Frequent=34-66% Continuous=67-100% (According to the Dictionary of Occupational Titles) Non-material handling: · Bending: Frequent. Various bending and low-level positions are performed while working. · Squatting: Frequent. Various positions required. · Kneeling: Frequent. Various positions required. · Balance: Continuous. · Overhead reach: Frequent. Performed while working on equipment. · Ladder: Frequent. Used when working on equipment. · Personnel Lifting Equipment: Frequent. Used when working on equipment. · Hand controls: Occasional. Hand controls are used for testing and operating machinery. · Tools used: Frequent. Tools commonly used include screwdrivers, pliers, wrenches, welders, and cordless drills...etc. · Sitting; Frequent. Sitting while driving to worksites. · Standing/Walking: Frequent · Fine motor coordination/manual dexterity: Frequent. · Rotation: Frequent. · Physical demand level: Moderate. Material handling: · Floor to waist: Occasional. Lifting may be performed at all levels from floor to overhead, up to 100 pounds. · Pushing/pulling: Occasional. · Physical demand level; Frequent. Position Type/Expected Hours of Work This is a full-time position. Normal days and hours of work are Monday through Friday, 7 a.m. to 4 p.m., but this is a 24/7 service position. This position regularly requires long hours (up to but not to exceed 14 hours) and weekend work. Travel Travel is primarily local during the business days, although out-of-town and overnight travel is expected. Benefits Standard benefits, including 401(k), PTO, health, dental, vision, life & disability insurance, a company vehicle to take to and from home, standard uniforms and $100 tool allowance per year. Company DescriptionAce Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.Ace Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.

Job Description Position Overview: TPG is actively seeking skilled Product Launch Prototype Mechanics who are "road warriors" to join our team based out of the San Antonio, TX area. Join our team supporting a leading global company dedicated to building state-of-the-art commercial vehicles. Successful candidates will support the research and development efforts to create the next generation of commercial transport solutions, driving innovation in the automotive and truck industry. Job Summary: The Product Launch Prototype Mechanic will play a pivotal role in supporting prototype vehicle assembly processes across multiple locations, ensuring adherence to established timelines and quality standards. This position is based in the San Antonio, Texas area, with a travel requirement of up to 80%. Primarily to Escobedo, Mexico; Tulsa, Oklahoma; Laredo, Texas; and other designated sites. Proficiency in both English and Spanish is essential to facilitate effective communication with diverse plant teams. The Product Launch Prototype Mechanic will also be responsible for servicing and repairing complex mechanical and electronic systems of vehicles, as well as providing support with in-test inspections, vehicle repairs, and more. This position will involve hands-on construction or modification of prototype vehicles, including medium duty trucks, buses, and heavy-duty trucks with various powertrains such as diesel, electric, and alternative fuels. The build operations department supports the R&D departments in the day-to-day operations and ensures that testing is not interrupted due to equipment failure or delays. Key Responsibilities: • Support product launches at various locations, ensuring adherence to timelines and quality standards., • Follow detailed manuals and written instructions for vehicle assembly processes., • Communicate effectively with engineers, Mechanics, and plant teams to ensure alignment and problem-solving during product launches., • Diagnoses mechanical, hardware, software and systems failures using established procedures., • Performs maintenance, testing and calibration of repaired products., • Prepares reports for analysis of product failure trends and service ability issues., • Scope may include assembling, disassembling, inspect, repair and install components on vehicles - including engines and powertrain. Either modify existing vehicles or build units from the ground up., • Conduct welding fabrication with Tig, Mig, Stick, Oxy-Acetylene Welding skills & plasma cutting., • Perform electrical troubleshooting and diagnostics., • Previous mechanic experience involving truck and engine assembly, repair, and fabrication. Strong mechanical aptitude., • Vehicle experience that includes some of the following: commercial vehicles, off-highway vehicles, agriculture vehicles, and/or passenger vehicles., • Experience with alternative fuels, including EV (electric vehicles), and/or Propane., • Experience with Cummins/Allison/Eaton/Duramax., • Training/Education as a Truck mechanic, as a Diesel Engine mechanic., • Experience with welding fabrication with Tig, Mig, Stick, Oxy-Acetylene Welding skills & plasma cutting., • Knowledge of multimeter and/or module programming., • Prior dealership or fleet service experience., • Basic knowledge of Microsoft Office - Outlook, Excel, PowerPoint., • Ability to follow detailed manuals and written instructions for vehicle assembly., • At least 3 years of experience supporting engineering activities and/or automotive or diesel mechanic experience., • Safety Sensitive position requiring all persons assigned to activity be drug-free and successfully pass drug screening prior to employment., • Requirement to lift at least 50 lbs., • Must provide own tools for their use on the job at main facility; company will have access to specialty equipment and will provide tools to travel locations., • While the base location is in the San Antonio, Texas area, the position requires the ability to travel up to 80%. At Technical Professionals Group, we are a dedicated team of automotive professionals with deep-rooted passion for the automotive industry. Our mission is to work collaboratively with leading OEM's and manufacturers to meticulously test and validate vehicles, ensuring they meet the highest standards of performance and safety. While providing the best results for our customers and fostering professional growth for our team members. We are excited to be at the forefront of the automotive industry, contributing to its evolution and working alongside some of the biggest names in the business. To discover more about our services, please visit our website at .

Job Description Company Info Circular Services, the largest privately held recycling and organics provider in the U.S., strengthens this mission through its national scale and long-term municipal partnerships. It operates over 25 facilities serving major long-term municipal and commercial contracts. The mission of Circular Services is to keep valuable materials in circulation and minimize the cost and environmental impact of landfills. The company services municipal contracts with some of the largest and fastest growing cities in the U.S. including New York City, Austin, San Antonio, and Phoenix. Generate Upcycle, now part of Circular Services, is a leading organics recycling and composting provider dedicated to helping people and communities contribute to something greater. Generate Upcycle expands access to composting for homes, businesses, and municipalities, managing a wide range of organic materials—including yard waste, food waste, and biosolids—through advanced grinding, blending, and aerated composting systems that produce high-quality compost. Together, Generate Upcycle and Circular Services deliver a unified, mission-driven platform for sustainable resource recovery, offering communities reliable, environmentally responsible recycling and organics solutions nationwide. About the Role: The Lead Mechanic will support a team of mechanics, coordinate repair schedules, manage parts inventory, and communicate with operations staff to minimize downtime. The position will also perform routine maintenance and servicing of equipment and trucks, including but not limited to diagnostics, inspections, parts replacement and system overhauls. • Planning and scheduling services needed for site, including other sites, • Directing and monitoring other mechanics activities and ensuring the completion of scheduled maintenance, • Order parts and interact with vendors to ensure all equipment is serviced/repaired in a timely and safe manner, • Provides reports to Site Manager documenting mechanic activities and work log, and ensure all the site’s mechanical needs are met, • Inspecting trucks, cranes, bulldozers, and other heavy equipment for proper performance., • Diagnostics using computerized testing equipment, • Enter data in maintenance management system, • Cleaning, lubricating, and conducting routine services, • Cleaning and servicing of machine attachments, such as winches, blades and side booms., • Perform major repairs when necessary, • Report damaged or faulty equipment, including safety concerns/hazards or defects to leadership on site when identified, • Perform emergency repairs in the field, • High school diploma or GED preferred, • Five (5) or more years’ experience with heavy equipment maintenance required, preferably in the compost industry, • Advanced knowledge of diesel and gas engines, welding, brakes and hydraulics, • Advanced knowledge of federal, state, and local job site health and safety rules, regulations, and best practices, • Ability to perform complex repairs and preventative maintenance on equipment, • Strong troubleshooting and diagnostic abilities using both manual and computerized tools, • Proficiency with tools, machinery, and repair equipment, • Ability to delegate tasks and oversee job completion with efficiency and accuracy, • Strong decision-making under pressure, especially in time-sensitive repair situations, • Ability to prioritize work orders and manage shop workflow, • Recordkeeping skills for maintenance logs, inventory, and service histories, • Ability to use company maintenance software, • Excellent verbal and written communication skills with internal and external customers, • Time management and multitasking in a fast-paced environment Normal work environment is indoors and outdoors, with exposure to all weather conditions, dirt, high levels of noise, smells/odors and at times exposure to dangerous and/or toxic substances requiring necessary precautions, including PPE. The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of the job. • Position requires the use of personal protective equipment (PPE) including, but not limited to, hearing protection, safety-toed boots, utility gloves, hard hat, reflective vest, and safety glasses., • Manual dexterity and hand-eye coordination necessary to utilize tools and other equipment necessary to perform job duties, • Auditory and visual acuity to monitor surroundings, equipment sounds, and safety signals (with or without corrective devices)., • Frequent walking, standing, bending, stooping, climbing, and kneeling required in outdoor and uneven terrain environments., • Tolerance to work in environments with strong odors, dust, humidity, and varying weather conditions (hot, cold, wet), and handle oils, fuels and other necessary liquids/chemicals. Pay Rate: $30-33, $1.50 increase after 90-180 days Hours can range from Monday-Friday, 7am-7pm, including weekends, with some variations per business demands. Work location/setting: • Paid Parental Leave, • Health insurance, • Dental insurance, • Vision insurance, • Life Insurance, • HSA/ FSA, • Paid time off, • Employee Assistance Program, • 401k matching, • Tuition Reimbursement EEOC: Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.

Job DescriptionSUMMARY STATEMENT: Administers the procurement of required parts or materials from a number of qualified and sources which will assure quality, continuity of supply, service, and competitive prices. Procure services for outside processing. Maintains accurate, auditable records according corporate policies and procedures. Insures aviation assets are sourced from certified suppliers and include required documentation. Assists others within the Purchasing staff to assure timely delivery of necessary materials, purchased parts, equipment and accessories at best value in accordance with specifications and delivery requirements. Report directly to Procurement Manager. ESSENTIAL DUTIES: 1. Develops and implements procurement plan for those assigned components, in accordance with program requirements., 2. Negotiates optimum price relative to specified immediate needs, known future requirements, price breaks, and other economic order quantity determinants., 3. Corresponds and assists in negotiating all vendor price increases and/or reschedules., 4. Seeks and develops potential sources of supply based on required processes and vendor capabilities., 5. Pursues a cost-reduction program by coordinating manufacturing experience and technical ability that will result in new and/or less costly designs, products, processes, or services., 6. Interfaces with other Company departments to resolve engineering, manufacturing, quality, or payable problems., 7. Receives and interviews with supplier sales personnel regarding new products, services, and/or problems., 8. Monitors vendor performance of existing contracts with regard to delivery and/or pricing., 9. Maintains rapport and honest business relations with all suppliers. Projects the professional image demanded by the Company in supplier and public relations., 10. Assist and advise other team members in solving specific purchasing issues and the training, guidance, and evaluation of others., 11. Establishes and maintains reports on all aspects of the procurement process including cost monitoring and reliability reports., 12. Daily attendance is an essential part of this position. EDUCATION & TRAINING: Bachelor's degree and five years experience or equivalent in related education/job experience. EXPERIENCE, SKILL, AND KNOWLEDGE: Five to Seven years of related experience. Strongly preferred working knowledge of the procurement of build-to-print components which may include: Sheet metal forming (stretch forming, hydro-forming, roll forming, machining, casting, forging, welding, and composite processes). Strong knowledge of outside processing desired. Must have understanding of MRP and MRPII operations and order policies. Ability to determine required processes based on engineering drawings. Candidates will need knowledge of general business conditions in current economic climate. Knowledge of contractual conditions and responsibilities as they relate to commercial aerospace purchasing/contracting, business law and the relationships between companies and their suppliers. Working knowledge of FAA regulations regarding aviation parts and materials. Ideal candidate will possess excellent verbal and written communications skills and be proficient with Microsoft Office Suite. Ability to make professional presentations related to program status is key.

Job Description About Bots Unlimited Bots Unlimited is a San Antonio based product development and hardware company that designs, produces, and supports high performance technology for drones, robotics, automation, and edge AI systems. We create advanced camera modules, long range wireless solutions, embedded compute platforms, and propulsion electronics, working closely with trusted manufacturing partners to deliver reliable hardware with a globally resilient supply chain. We also provide customers with supply chain support and manufacturing services to help bring complete products to market. We operate in a fast moving, execution focused environment where team members own their work end to end and are trusted to manage themselves with a high level of accountability. Our team values initiative, clear communication, and a strong sense of responsibility, qualities that let us move quickly and ship production-ready hardware. If you thrive in a setting where you can take full ownership, solve complex challenges, and build products used in real world scenarios, we may be the right fit for you! Position Overview We are seeking a highly experienced Senior Mechanical Engineer to lead the end-to-end mechanical development of our robotics and drone hardware. This is a high-impact, hybrid role requiring a rare combination of expertise: you will own the mechanical design for both high-performance electromechanical subsystems (brushless DC motors, rotating assemblies) and product enclosures (precision plastics, protective sleeves, and ruggedized housings). We are looking for self-managed, Type A personalities: people who thrive in fast-moving environments, can work independently, and push projects forward without constant direction. Your work will directly enable our Bots Unlimited product lineup, turning complex motor and enclosure concepts into production-ready hardware that meets tight tolerance, thermal, and aesthetic requirements. • Plastics & Enclosures: Lead the design and engineering of high-precision mold injected plastic enclosures, including cell phone-style sleeves, protective cases, and internal mounting structures., • Electromechanical Design: Develop 3D CAD models for motors, housings, rotor/stator sub-assemblies, shafts, and bearings., • Lifecycle Management: Own the full design lifecycle from concept through detailed CAD modeling, drawing release, and manufacturing support., • Technical Documentation: Produce full mechanical drawings including GD&T, tolerance stacks, material specifications, and surface-finish details for both machined metal and injection-molded parts., • PLM & Data Management: Manage and maintain mechanical data, part numbers, and revision control within the Duro PLM system (or equivalent)., • DFM/DFMA: Perform rigorous reviews to ensure designs are optimized for injection molding, CNC machining, and rapid assembly., • Vendor Coordination: Interface with global vendors to issue RFQs, review vendor drawings, negotiate tolerances, and manage prototype/production builds. Required Qualifications • Education: Bachelor’s or Master’s degree in Mechanical Engineering or equivalent experience., • Experience: 5–10+ years of professional mechanical design experience., • Dual Expertise: Proven track record designing both high-volume mold injected plastic products (e.g., consumer electronics, phone cases, rugged enclosures) and rotating equipment/motors., • CAD Mastery: Expert proficiency in 3D CAD (SolidWorks, Autodesk Inventor, or Creo) with the ability to manage complex assemblies and detailed 2D drawings., • Manufacturing Knowledge: Deep understanding of injection molding (tooling, draft, sink, gates) and CNC machining processes., • Technical Standards: Solid understanding of GD&T, tolerance analysis, and material properties (polymers, resins, and alloys)., • Systems Tools: Experience using PLM/PDM systems (e.g., Duro, Windchill) to manage part revisions and BOMs., • Hands-on Skills: Proficiency with calipers, micrometers, and lab tools for physical prototype validation and fit/clearance checks., • Communication: Excellent verbal and written skills; ability to work onsite in San Antonio and travel periodically for vendor visits or product milestones. Preferred Qualifications • Prior experience with brushless DC (BLDC) motors or electromechanical actuators., • Experience in overmolding, ultrasonic welding, or advanced plastic finishing processes., • Background in rotor balancing, vibration analysis, or thermal management for electronics., • Previous experience with supplier sourcing and DFM for mass production., • Familiarity with rotating systems safety standards and impact resistance for mobile devices. Physical and Mental Requirements • Ability to sit and/or stand for periods of time., • Ability to use a keyboard, mouse, and other equipment with or without accommodation(s)., • Ability to maintain awareness during business hours., • Ability to lift 15 pounds. [MAYBE MORE IF WAREHOUSE], • Excellent written and verbal communication and good command of the English language., • Ability to learn and memorize routine tasks., • Reasonable accommodations will be provided to any person with a disability to be able to perform the essential job functions of this position., • Company retains the right to change or assign other duties as required for this position. Selection Process • Hiring team reviews applications, • 15-minute pre-screen with recruiter, • 30-minute phone screen with the hiring manager, • Take home project Benefits • Comprehensive medical plans with Rx, • 100% employer paid dental and vision insurance premiums, • Automatic 401k employer contribution with vesting, • Paid vacation and personal time off, • 11 Paid holidays

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off Essential Duties and Responsibilities Vehicle & Equipment Maintenance • Perform preventive maintenance on fleet assets including:, • Light- and medium-duty trucks (F-150/F-250, flatbeds, dump trucks, crew cabs), • Trailers (utility, enclosed, dump, gooseneck), • Commercial mowing equipment (zero-turn mowers, stand-on mowers), • Small engine equipment (blowers, trimmers, edgers, hedge trimmers), • Compact construction equipment (mini skid steers, mini excavators, loaders), • Conduct routine inspections and identify mechanical, electrical, and hydraulic issues., • Diagnose and repair engines, transmissions, brakes, suspension, steering, cooling systems, and electrical systems., • Perform welding, fabrication, and minor body repairs as needed., • Complete scheduled PM services (oil changes, filters, belts, hoses, fluids, lubrication)., • Accurately document all repairs and maintenance using work orders or fleet management software., • Maintain service records for compliance, warranty, and cost tracking., • Follow company safety policies, OSHA standards, and Lockout/Tagout (LOTO) procedures., • Ensure all vehicles and equipment meet operational and safety standards before release., • Maintain a clean and organized shop environment., • Communicate with Fleet Manager and operations teams regarding equipment status and repair timelines., • Respond to breakdowns in the field when necessary., • Support emergency repairs to keep crews operational., • High school diploma or GED (Technical school preferred)., • Minimum 13 years experience as a mechanic (fleet, diesel, or small engine preferred)., • Strong knowledge of:, • Gas and diesel engines, • Hydraulics and electrical systems, • Small engine repair, • Trailer and brake systems, • Ability to read service manuals and diagnostic software., • Proficient with hand tools and shop equipment., • Valid drivers license (CDL preferred or ability to obtain)., • Ability to lift up to 75 lbs and work in outdoor/industrial environments., • Experience servicing brands such as Ditch Witch, Takeuchi, Scagg, Vermeer, Toro, Echo, Stihl, John Deere, Honda or similar.Work Environment, • Indoor shop and travel to outdoor job sites required., • Exposure to noise, grease, fuel, and weather conditions., • May require extended hours during peak landscape seasons., • On-call or emergency repair availability may be required.Preferred Certifications (not required but beneficial), • ASE Certifications (A1A8 or T series), • DOT Inspector Certification, • Small Engine Repair Certification, • Welding Certification, • EPA 609 (A/C systems)

Job Description About Us: At Automated Cleaning Technologies, we are at the forefront of innovation in the aerospace, manufacturing, military, and energy sectors. We specialize in designing cutting-edge machinery that meets the highest standards of quality, safety, environmental stewardship, and performance. Our machinery is designed and built in our San Antonio factory locations and used worldwide. We are looking for a talented and experienced Machine Designer to join our dynamic team and contribute to the development of our innovative products. Job Summary: As an Experienced Mechanical Engineer, you will be responsible for creating detailed CAD models and drawings of machinery components and systems for complete machine designs. Solidworks and Solidworks PDM are our primary CAD vehicles. Your expertise with Solidworks software will play a crucial role in the design process, ensuring that our products are both functional and manufacturable, and approved for fabrication on schedule. ACT machines its own parts, cuts sheet metal on a CNC laser, forms on a CNC press brake, and laser welds systems into complex, task specific, machines. Key Responsibilities: • Attend Sales Order release meetings. You will be assigned specific projects in whole or part to work on., • Submit a detailed timeline to be reviewed by management that illustrates your ability to meet the schedule., • Develop and maintain detailed CAD models and technical drawings for machinery design projects., • Collaborate with engineering and production teams to translate concepts into viable designs., • Review and analyze designs to ensure compliance with industry standards and specifications., • Provide a daily thumbnail to management briefly showcasing your project progress as it relates to the approved timeline and schedule., • Maximize your software skills to continually improve design efficiency and accuracy., • Participate in design reviews and provide constructive feedback to team members., • Create accurate FAB drawings for CNC Laser cutting, CNC Press Brake forming, and Laser Welding of stainless steel, aluminum and steel structures and parts at requisite tolerances., • Perform FEA and record data and calculations., • Use your engineering skills to deliver accurate pump flows, pressures, filtration devices, heat input (electric and gas), pneumatic circuits and make-up and exhaust ductwork to ASHRAE requirements., • Create designs for sanitary orbitally welded tubing including brackets and supports., • Incorporate input from the UL Certified electrical department into each system including control panel supports, wireway, and main feed supply for all utilities., • Create P & ID drawings., • Stay updated with the latest technology and trends in CAD design and machinery engineering., • Create IPB’s and ISO and traditional system views, and written machine operation verbiage in support of system documentation requirements., • We are looking for people with real world machinery experience 3 years to 20+ that can be beneficial to our Engineering Department. Mid-level to senior level experienced personnel are encouraged to apply. Bachelor’s degree in mechanical engineering, Industrial Design, or a related field welcome but NOT mandatory., • Proficiency in CAD software (e.g., SolidWorks, AutoCAD). Pass a site software test., • Strong understanding of machinery design principles and manufacturing processes., • Excellent attention to detail and problem-solving skills., • Effective communication skills in English and the ability to work collaboratively in a team environment., • Competitive salary and performance/schedule-based incentives. Verifiable experience is key 1 and meeting schedules is key 2 to maximizing compensation. We prefer to have a few superstars vs. a room full of slow pokes!, • Comprehensive health, dental, and vision insurance., • Paid time off and flexible scheduling., • Holidays paid, • Opportunities for professional development., • Production completion bonus plan for 2026

Classification: Non-Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers' manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230-volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit ___. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

JOB TITLE - Bulk/Fleet Mechanic MATHESON one of the nation's leading bulk suppliers of liquefied gases. Our Diesel Mechanics perform repairs and scheduled preventative maintenance in accordance with DOT standards on both our tractors and cryogenic trailers. Other duties will include maintaining shop parts, ordering and inventory control, tire repairs/changes, light vehicle electrical and some welding. The ideal candidate will be able to problem solve and be flexible to the ever-changing environment of the Cryogenic and Transportation industries. With MATHESON, you are moving your career in the right direction! Knowledge, Skills and Abilities Good knowledge of quality management systems, FDA Vol 40 and CMGP; experience in change management are a plus but not required Strong Knowledge of DOT and Safety Regulations Basic computer skills along with written and oral communication skills Product line knowledge LIN/LOX/LAR preferred but not required Prefer welding expertise with aluminum and stainless to include TIG Hydraulic system background preferred Preferred diagnostic background to include Cummins, Detroit Diesel, Eaton Transmission and International Engines Required for All Jobs Performs other duties as assigned Complies with all policies and standards Education High school graduate with additional training such as technical school classes. Work Experience Preferred 1-3 years - 2 years' diesel mechanic experience / highway equipment maintenance or relevant training from a Technical School. Essential Functions Willingness to work outdoors Ability to lift 75 pounds Ability to bend, climb into cabs of trucks, use tools and power tools Ability to work extended hours as business needs dictate On call nights, weekends and holidays as required Provide own hand tools and chest with tools up to 1-1/4" Licenses and Certifications DOT air brake certification and annual federal vehicle inspection certification Class A CDL with Hazmat/Tanker Endorsements is preferred but not required Must be willing to get Class A CDL with Hazmat/Tanker Endorsements Matheson is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability Apply NowShare Save Job

Job Description Maaco America's Bodyshop is looking for a motivated body tech to add to our team. Requirements: -Valid driver license • Knowledge of body repairs, • Experiencing welding metal and aluminum, • Knowledge of frame pulling -Own tools Preferred: • ICar certified Hours: Paid based off Flag hours Company DescriptionMaaco America's Body shop is a well-known Franchise is the auto body industry.Maaco America's Body shop is a well-known Franchise is the auto body industry.

Job DescriptionTHIS POSITION IS IN PFLUGERVILLE, TX PLEASE CHECK YOUR COMMUTE DISTANCE. CANDIDATES MUST BE WILLING TO RELOCATE WITHIN COMMUTING DISTANCE TO AUSTIN, TX. ASSISTANCE WITH RELOCATION POSSIBLE FOR THE RIGHT CANDIDATE. Benefits/Perks • Competitive Compensation (Up to $30 per Flag Hour) This is based on the number of body hours you produce per week., • Great Work Environment, • Career Advancement Opportunities, • 401(k), • Dental insurance, • Health insurance, • Vision insurance, • Inspect and provide accurate estimates for auto-body repair, • Maintain strong lines of communication between yourself, the Maaco repair team, and the client throughout the whole process to build relationships and provide excellent customer service, • Repair vehicles to the best of your ability, maintaining our high standards, • Work within the guidelines of various insurance guidelines, • Makes decisions on repair vs. replace considering safety, cost and cycle time., • Participates in all required safety meetings.Qualifications, • Must have own tools, • Minimum of 3 years of experience working in a collision shop., • Ability to repair or replace panels according to OEM procedures, • Ability to use frame machine preferred, • Certification in body repair preferred, • I-CAR certified preferred, • Skill in analyzing and interpreting measuring data, • Mechanic experience, • Welding, • Strong customer service skills, • Excellent attention to detail, • Familiarity with insurance guidelines desired

Job Description Alamo Door Systems is a growing company that provides a safe and dynamic working environment and are looking to add to our team of well qualified employees. We are seeking safety minded and detail oriented individuals who are highly motivated and thrive in a fast paced environment. We are looking for leaders. SKILLS: Must be able to follow instructions Warehouse experience desired Must have your own transportation Punctual Mechanically inclined Door installation experience a plus Knowledge of carpentry desired Inventory Welding (MIG & Stick) a plus (Certification not required) Operate Fork & Scissor lifts Work with grinders, skill saws, chop saws, jig saws, levels Problem solver Good communications skills Clean driving record Able to pass Federal/State/Local background checks Social Security Number RESPONSIBILITIES INCLUDE: Installing overhead commercial doors, dock seals and bumpers, garage doors, commercial personnel doors, interior solid core wood doors, commercial hardware, restroom partitions and restroom accessories. Knowledge of installation of warehouse truck docking equipment, gate openers, overhead door motors and sensors. Must be able to operate a variety of hand tools to perform service and onsite repairs that include springs, motors, brackets, remotes and related equipment with little assistance. Basic knowledge of electrical wiring and welding techniques are a plus. Maintain a clean, neat & orderly work area. Conduct operations in a manner that promotes safety at all times and insures quality. Job functions may vary depending on work assignment and may require assistance in various areas of operation. We will provide door installation and repair training. PHYSICAL DEMANDS: Frequent requirements include but are not limited to: Standing, lifting of 50lbs, carrying 50lbs, walking, pushing, stooping, bending, climbing, crouching, reaching above and below shoulder level. Full use of hands, good finger dexterity, lifting from floor to waist and twisting of torso. Also includes working in cramped garages, on ladders and with power tools and perform manual labor in an exterior environment exposed to heat, sun, humidity, and other adverse weather conditions. CUSTOMER SERVICE: Serve as a liaison between Alamo Door Systems and the customer. Always conduct yourself in a professional manner in appearance and communications at all times. Company DescriptionAlamo Door Systems, a leading assembler and distributor of construction products with a continuous business history in Central and South Texas. We offer a friendly, fast paced environment with competitive pay and benefits, with the opportunity for growth and on the job training/certifications. Benefits include: health insurance, paid vacation, paid holidays, sick leave, and simple IRA plan. Come join our team, and find your new work home!Alamo Door Systems, a leading assembler and distributor of construction products with a continuous business history in Central and South Texas. We offer a friendly, fast paced environment with competitive pay and benefits, with the opportunity for growth and on the job training/certifications.\r\n\r\nBenefits include: health insurance, paid vacation, paid holidays, sick leave, and simple IRA plan. \r\n\r\nCome join our team, and find your new work home!