Welding jobs in Charlotte, North CarolinaCrear alertas

Overview: Job Status/Type: Full time Position Level: Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: • 3 weeks paid vacation (6 sick days, 8 paid holidays), • Several medical coverage options to fit your needs best, • 401K match, • Maintenance-specific scholarships available, • FREE entry to ALL our parks and water parks! Perks: • Yearly maintenance appreciation week celebration, • Complimentary tickets for friends and family, • Discounts on food and park merchandise, • Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: • Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory., • Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions., • Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner., • Communicates the status of assigned rides both verbally and in written format., • Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices., • Reads, understands, and applies information from manufacturer’s manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required., • Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc., • Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions., • Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor., • Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs., • Meets Six Flag’s attendance requirements as outlined in Six Flag’s attendance policies., • Adheres to Six Flag’s code of conduct including costuming and grooming standards as outlined in employees’ Guidelines and other park/division specific policies and procedures., • Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver’s license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Install Refractory products such as Refractory Plastic, Ram, Brick, Castable and Gunnite, • Removal of refractory with chipping hammers and rivet busters, • Use hand tools and power tools to perform basic construction tasks, • Running gunite machinery during installation of refractory materials., • Perform stick welding of steel anchors., • Read and interpret blueprints, schematics, and technical drawings, • Train apprentices in masonry skills, • Ability to Travel - Currently position would require some out-of-town travel as some of our customers are Out of State. Qualifications, • 5 + years of bricklayer experience, residential and commercial, • 3+ years’ experience in construction projects. (Industrial construction is helpful) (Refractory knowledge and experience is extremely helpful, but not required)., • Knowledge of construction methods and technologies, and ability to interpret technical drawings and contracts, • Knowledge of building forms for masonry work (arches, lintels, ect.), • Previous experience as a Mason or in a similar position, • Ability to adapt to multiple projects simultaneously with a constant eye on quality Certification or training in masonry is preferred, • Ability to collaborate with other construction professionals, • Strong attention to detail, • Excellent hand-eye coordination, • Ability to adhere to all safety rules and regulations, • Knowledge of power tools and industrial machinery is preferred

Job Description Shop Mechanic and/or Commercial Van Equipment Installer. Work on various truck equipment, i.e., liftgates, roll up doors, panel trucks, cranes, hydraulics, upfit installation (ladder racks, shelving, etc.) Welding not required but a plus. Prep/Clean-up of various jobs required. Must have own tools/toolbox. Additional duties as directed by shop foreman/owner which may include but not limited to general shop and property upkeep as necessary.

Job DescriptionDock & Door Technician Technicians Greenville, South Carolina Find Your Career with LiftOne: We're a fourth-generation, family-owned company approaching our 100th anniversary under the Weisiger Group. Built on a legacy of trust, integrity, and service excellence, LiftOne proudly supports our countries supply chain by keeping essential goods moving. About the Role – Dock & Door Technician: As a Dock & Door Technician at LiftOne, you'll diagnose, repair, and maintain loading dock and doors at customer sites. You'll work independently, travel locally, and play an essential role in helping businesses stay productive. This position is ideal for candidates with backgrounds in automotive, diesel, or military who enjoy hands-on technical work and problem-solving. Experience with hydraulics, electrical systems, engines, or diagnostics is highly valued, and well provide specialized industry training to help you succeed. What You'll Do: • Diagnose and repair loading dock and doors, • Perform preventative maintenance and safety inspections, • Accurately document work performed and communicate effectively with customers using our work order management system, • Maintain your service vehicle, tools, and parts inventory, • 2+ years of experience in skilled trade (Mechanical, Hydraulic, Fabrication, or Electrical), • Previous experience in installation or maintenance in commercial doors, HVAC systems, construction, military, fabrication or automotive repair, • Welding certification is a plus - welding certification within the first 30 days of being hired., • Strong troubleshooting skills in mechanical, hydraulic, or electrical systems, • Ability to work independently in the field, • Valid drivers license with a clean driving record, • Strong customer service mindset and positive attitude, • Experience with ServiceMax or similar computerized maintenance/work order management systems preferred, • Competitive pay based on experience, • Comprehensive factory and OEM training, • Company service vehicle, gas card, and uniforms (for field roles), • Company-provided tablet and phone, • Full benefits package, including:, • Medical, dental, and vision coverage, • Health Savings Account (HSA) and Flexible Spending Account (FSA) options, • Access to chiropractic and physical therapy visits through insurance enrollment (subject to plan eligibility and limitations), • 401(k) with company match, • Company-paid life insurance and short/long-term disability, • Paid time off, holidays, and personal leave, • Career advancement opportunities across the Weisiger Group family of companies EEO/AA Employer. All qualified individuals are encouraged to apply.

Job DescriptionClosed Loop Recycling (CLR) is seeking a hard-working, self-motivated Route Driver/Warehouse Associate to join our production team. CLR is one of the fastest-growing recycling companies. We provide a full service to manufacturers in which we provide them with reusable oil-absorbent material that soaks up leaks and spills in their facilities. Our plants' role is extracting the oily fluid from the material for reuse, laundering the material for reuse, cleaning out 55-gallon collection drums for reuse, and repackaging cleaned material. You’ll be working with a small team but have room for advancement in your career here. This position will require truck training to service clients when needed. Our CSRs remove 55-gallon collection drums filled with saturated oil absorbent mats, PPE, and other items and replace them with new materials. This is a physical, fast-paced, outdoor position that involves driving over the road, lifting, and moving heavy objects frequently, and communicating with our logistics department. For this position, we offer two distinct pay rates depending on the role being performed. For work in the warehouse, the pay rate is approximately $18 to 20. For truck driving, the pay rate ranges from $20 to $25 per hour, depending on the candidate's experience. Driver Responsibilities: • Class B CDL- (preferred), • DOT Medical Card, • Ability to travel as needed (over the road), • Ability to move heavy objects (200+ lbs with assistance of a dolly or pallet jack), • Must have a clean driving/criminal record, • Must pass our pre-employment physical strength test,, • Must pass our pre-employment drug and alcohol test, • Skills and Experience:, • High School Diploma or Equivalent, • Ability to use a pallet jack, • Ability to lift heavy objects, • Plant/warehouse experience, • Mechanic/carpentry/welding experience a plus, • Ability to operate warehouse equipmentPlant Responsibilities:, • Cleaning absorbent mats, • Washing & sorting drums, • Folding, sorting, cutting absorbent mats and other products, • Stocking inventory shelves and inventory tracking, • Loading and unloading service trucks, • Trains and works at different workstations as production needs require, • Keeping the facility up to OSHA safety standards and audit-ready, • Health, Dental, and Vision Insurance, • Paid time off, • Paid holidays, • 401(k)

Job Description Join North Coast Container as a Full-Time Industrial Electrical Mechanic and dive into a world of innovation and hands-on excellence! Located in the vibrant city of Charlotte, North Carolina, this onsite position offers an exciting opportunity to work with cutting-edge machinery and collaborate with a passionate team dedicated to safety and integrity. You'll tackle real-world challenges every day, enhancing both your skills and the manufacturing process. This role not only drives customer-centric solutions but also places you at the heart of our commitment to excellence. Experience the thrill of transforming the manufacturing landscape while being part of a dynamic company that celebrates your contributions and values your expertise. You will have benefits such as Medical, Dental, Vision, 401(k) match, Life Insurance, Competitive Salary, and Paid Time Off. Embrace the adventure-apply today and shape the future with us! A little about North Coast Container North Coast Container (NCC) is the leading independent manufacturer of steel drums in North America because of our unwavering customer focus. Your day to day as aN Industrial Electrical Mechanic As a Full-Time Industrial Electrical Mechanic at North Coast Container, you will be at the forefront of our manufacturing excellence, taking on an exciting hands-on role. Your key responsibilities will include performing preventive maintenance and repairs on mechanical systems, such as bearings, gearboxes, pneumatics, and hydraulic systems, ensuring optimal performance of our production equipment. You will troubleshoot and repair electrical systems up to 480V, including motors, VFDs, and PLC I/O, while also installing and modifying control wiring across a range of voltages. Your expertise will extend to reading and red-lining electrical schematics and control drawings, as well as welding and fabricating as needed. By responding swiftly to breakdowns and documenting your work in our CMMS, you will play a vital role in minimizing downtime. Adhering strictly to LOTO, arc flash, and NFPA 70E safety standards, your contribution will be key to maintaining a safe and efficient work environment. Does this sound like you? To thrive as a Full-Time Industrial Electrical Mechanic at North Coast Container, you'll need a robust set of skills and experiences. A minimum of 3 years of industrial maintenance experience-preferably in manufacturing-is essential, alongside proven abilities in control wiring such as running conduit, pulling wire, and building or modifying panels. Your expertise in troubleshooting 480V/3-phase systems, motor controls, VFDs, and PLC I/O will enable you to effectively use tools like multimeters. A strong capacity to interpret and update control schematics is crucial for maintaining operational efficiency. Experience in welding, fabrication, and proficiency with shop tools will further enhance your capabilities. Flexibility to work any shift and the stamina to lift 50+ lbs and navigate confined spaces are key physical requirements. A technical diploma, journeyman card, or equivalent experience is necessary, while familiarity with Allen-Bradley PLCs and robotics maintenance will set you apart as a preferred candidate. Knowledge and skills required for the position are: • 3+ years industrial maintenance experience (manufacturing preferred), • Proven control wiring skills: running conduit, pulling wire, terminating wires, & building/modifying panels, • Strong 480V/3-phase ,motor control, VFD, and PLC I/O troubleshooting (multimeter calibrator), • Ability to interpret and update control schematics, • Welding/fabrication and shop tool experience, • Able to work any shift(1st or 2nd) as well as overtime, • Physically able to lift 50+ lbs, climb, and work in confined spaces, • Technical diploma, • Journeyman card or equivalent experience required, • Preferred, • Allen-Bradley PLC (ControlLogix/CompactLogix) troubleshooting & minor edits, • Robotics maintenance, • Predictive tools Job Posted by ApplicantPro

Job Description About Us Arc3 Gases is a family-owned, independent distributor of industrial gases, welding supplies, safety products, and hardgoods used in metal fabrication industries. We prioritize family values and a focus on people while safely delivering solutions to the customers we serve. Our core values include trust, responsiveness, reliability, and technical competence. Job Overview Arc3 Gases is looking for a qualified individual to fill our Inside Sales Representative position at our Charlotte, NC store. The most successful candidate for this role is someone who will help grow Arc3’s profitable sales by effectively providing technical expertise, support, and service to existing and potential customers and Arc3’s salesforce. Responsibilities and Duties • Sell industrial, medical, and specialty gases along with welding supplies and related equipment to walk-in customers., • Provide excellent customer service in a timely manner by answering phone calls, handling customer complaints, providing all necessary paperwork in relation to purchases, retrieving stock, and assisting in loading customer vehicles., • Advise customers on equipment and materials needed and procedures to follow to complete tasks they wish to perform., • Possess strong welding product knowledge and self-management skills to deliver superior customer service., • Anticipate customer needs and expectations (i.e., product orders, potential sales, service issues, technical support needs) and share that vital information with appropriate Arc3 personnel., • Notify the purchasing department when there is a shortage or outage of products., • Act with integrity and a sense of urgency, be reliable and persistent, and build strong, long-term customer relationships., • Drive a company vehicle to deliver products to customers when the primary driver is unavailable or business needs dictate., • Always maintain a professional demeanor and appearance., • Provide support to other team members by preparing orders and ordering supplies as needed., • Must be able to work in the United States, • Must be 18 years or older, • Must be able to lift and carry up to 75lbs of merchandise as needed, • Must have a valid license with clean driving record., • Must have Class B CDL with hazmat endorsement., • Must have computer skills or some knowledge of computer order entry system., • Must have exceptional customer service communication skills., • High School Diploma or Equivalent is required., • Competitive pay and comprehensive benefits package., • Opportunities for professional growth and advancement within the company. Arc3 Gases requires all employees to sign a non-disclosure of confidential information agreement. Benefits • 401(k) Retirement Plan with Company Match, • Health, Dental, and Vision Insurance, • Health Care and Dependent Care Flexible Spending Accounts, • Health Savings Accounts with Annual Company Contribution, • Company Paid Short-Term and Long-Term Disability Insurance, • Company Paid Life and Accidental Death and Dismemberment Insurance, • Voluntary Life, Critical Illness, and Accident Insurance, • New Employee Referral Bonus Program, • Tuition Reimbursement, • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • Wellness Program with Health Insurance Premium Discounts, • Company Paid Uniforms #sales #insidesales #countersales #gas #gases #specialtygases #industrialgases #weldingsupply #weldingsupplies #weldingproducts #equipment #customers #customerservice #cdl

Job DescriptionSalary: $89,000 - $105,000 About JMS Our passion is our people and the positive impact they make. Since being established in 1962, Jim Myers & Sons, Inc (JMS)has become one of the nation's leading designers and manufacturers of water and water treatment equipment and systems. This success is the result of our employees' diverse technical and business expertise, which fuels collaboration and ongoing innovation. We use equal parts innovation, quality, and reliability to create comprehensive, solution driven product offerings for our customers. Learn more about us at . Why join the JMS team? • Family owned and oriented workplace, • Work and collaborate with a small team who has become one of the best in the industry, • Use industry-leading technology and the best tools available to ensure success, • Working in a stable industry with strong growth potential We are proud to offer: • Competitive base salary, • Bonus opportunities, • Company paidmedical, • Dental and life insurance, • 401K, • Excellent training, • Great family work environment, • Paid vacation and holidays Job Summary The Design Engineer position at Jim Myers & Sons, Inc. (JMS) is a key member of the Mega-Business Unit Design Team and is a fast-paced, project-execution-focused role responsible for producing high-quality, accurate, and manufacturable design deliverables. The Design Engineer develops complete submittal-level drawing packages by translating approved engineering calculations, project specifications, and project plans into coordinated mechanical equipment designs in accordance with JMS standards. This role owns detailed design execution for assigned projects while providing elevated CAD judgment and design authority. The Design Engineer leads internal design reviews, resolves design coordination and CAD execution issues, ensures alignment with manufacturability requirements, and delivers complete, well-coordinated designs ready for detailing and fabrication following submittal approval. While Project Engineering retains responsibility for engineering calculations, the Design Engineer is accountable for the correct implementation of engineering intent into CAD and design deliverables. Responsibilities Include Own project design timing, quality, and completion of assigned design deliverables. Design mechanical equipment with a high level of accuracy, attention to detail, and adherence to JMS standards. Apply engineering calculations, project specifications, and project plans to produce compliant design solutions. Serve as the primary CAD and design authority for assigned projects. Create complete, detailed submittal-level drawing packages aligned with project milestones and customer requirements. Lead internal design reviews, coordinate project team input, and ensure timely resolution of design comments. Make authoritative CAD decisions related to layouts, assemblies, interfaces, and model structure within approved engineering intent. Adhere to project schedules and specifications to meet defined time objectives and key milestones. Collaborate closely with Project Engineering, Manufacturing Engineering, and Detailing to resolve design issues and ensure manufacturability. Incorporate manufacturing feedback and vendor interface requirements into final designs. Work effectively and efficiently with project team members across multiple concurrent projects. Provide design support during fabrication, detailing, installation, and troubleshooting, including limited travel to plant or field sites as required. Apply strong analytical, logical, and problem-solving skills to identify and resolve design challenges. Follow all JMS, Inc. policies, procedures, and quality requirements. Qualifications, Desired Experience, and Skills Minimum of 5 years (6,000+ hours) of experience in 3D modeling using SolidWorks. Expert-level 3D design capability; Certified SolidWorks Professional (CSWP) strongly preferred. Minimum of 2 years of experience with SolidWorks PDM (preferred). At least 5 years of experience designing mechanical equipment, including weldments, sheet metal, and assemblies. Experience with detailing using SolidWorks (minimum 2 years preferred). Strong background in mechanical equipment design with a high level of attention to detail. Demonstrated experience with power transmission systems, including motors, gearboxes, chain drives, shafts, and bearings. Working knowledge of fabrication and manufacturing processes such as bending, punching, welding, and machining. High level of proficiency in Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook. Strong communication skills, including the ability to collaborate effectively and negotiate positive outcomes. Strong analytical, logical, and problem-solving skills. Demonstrated desire for continuous learning and ongoing professional development. Experience in the municipal water and wastewater industry is a plus. Education Bachelor of Science in Mechanical Engineering from an accredited institution is required. JMS is an Equal Opportunity Employer

Job Description Company Overview: Founded in 1992, InServ is a full-service industrial contractor serving the life sciences, advanced manufacturing, and food and beverage sectors. We specialize in mechanical, electrical and instrumentation, hygienic piping and HVAC trades. Operating from multiple locations across North Carolina, we serve clients throughout the Southeast. Our success is built on an unwavering commitment to safety, quality, and schedule adherence. Job Summary: We are seeking a skilled and experienced Industrial HVAC Sheet Metal Mechanic to join our team. As an Industrial HVAC Sheet Metal Mechanic, you will be responsible for fabricating, assembling, installing, and maintaining sheet metal components for industrial HVAC systems. Your expertise in sheet metal fabrication, equipment installation, and system troubleshooting will be crucial to ensuring the efficient and effective operation of HVAC systems in various industrial settings. Per diem may be available to qualified candidates. Experience: Previous experience working as an Industrial HVAC Sheet Metal Mechanic or similar role in the HVAC industry Essential Duties and Responsibilities: • Sheet Metal Fabrication: Fabricate and shape sheet metal components, including ducts, pipes, fittings, and other necessary parts using specialized tools, equipment, and machinery. Interpret engineering drawings and specifications to ensure accurate fabrication., • System Installation: Install and assemble fabricated sheet metal components, including ductwork, exhaust systems, ventilation systems, and other HVAC-related equipment, according to project requirements and industry standards. Ensure proper sealing, insulation, and structural integrity of installed components., • Equipment Maintenance: Perform regular inspections, preventive maintenance, and repairs on industrial HVAC systems, including sheet metal components. Identify and troubleshoot issues related to ductwork, insulation, airflow, and equipment malfunctions. Replace or repair damaged or worn-out parts as necessary., • Collaborate with Team: Collaborate with project managers, engineers, and other HVAC professionals to plan and execute projects effectively. Provide input on design modifications, cost estimates, and material requirements. Coordinate with other trades and contractors on-site to ensure smooth project progression., • Safety Compliance: Adhere to safety regulations, protocols, and industry standards while performing all tasks. Identify potential safety hazards and take appropriate measures to mitigate risks. Promote and maintain a safe working environment for yourself and team members., • Proficiency in sheet metal fabrication techniques, including cutting, bending, welding, and soldering., • Strong understanding of industrial HVAC systems, equipment, and components., • Ability to interpret engineering drawings, blueprints, and technical specifications., • Familiarity with HVAC codes, regulations, and safety standards., • Competence in using hand and power tools, as well as specialized sheet metal fabrication equipment., • Knowledge of ductwork design, airflow principles, and insulation materials., • Solid troubleshooting and problem-solving skills to identify and resolve issues effectively., • Excellent organizational and time management abilities to handle multiple tasks and prioritize work efficiently., • Strong attention to detail and quality craftsmanship., • Construction and industrial job sites with exposure to noise, heavy equipment, varying temperatures, and physical labor., • Paid time off, • 401(k), • Health, Dental and Vision insurance, • Health Savings account and Flexible spending account Note: InServ conducts a Background Check and Drug & Alcohol Screening on all employee

Job Description Quality Control Manager Location: Charlotte, NC Company Overview Bendel Tank and Heat Exchanger, LLC, a division of TransTech Group, LLC, is a leading manufacturer of custom Carbon Steel, Stainless Steel, and Nickel Alloy vessels per ASME, API, TEMA, and UL specifications. Having been in business for over 50 years, Bendel serves several industries including: chemical, petrochemical, pharmaceutical, and industrial food manufacturing. Bendel has a strong company culture built on a family atmosphere where success is defined by the impact on the lives of our stakeholders. Position Summary We are seeking a strategic Quality Control Manager to spearhead our quality assurance programs within a high-volume metal manufacturing environment. This leadership role is responsible for ensuring rigorous compliance with international regulatory standards and client specifications. The successful candidate will collaborate with Engineering and Production teams to drive a culture of continuous improvement, oversee end-to-end inspection frameworks, and serve as the primary liaison for technical audits and certifications. Tasks & Responsibilities • Project Documentation & ITPs: Develop and interpret detailed Inspection Test Plans (ITP) and comprehensive project data packages to ensure seamless coordination with customer inspectors and adherence to contract specifications., • Quality Governance: Develop and optimize comprehensive QC standards and protocols aligned with engineering specifications and regulatory mandates., • Regulatory Compliance: Manage the integrity of quality documentation, manuals, and filing systems to ensure audit-readiness at all times., • Technical Inspection: Execute precision inspections of raw materials and verify fabrication accuracy against complex engineering schematics., • Weld Integrity: Perform visual and liquid penetrant weld inspections; maintain meticulous traceability records, weld maps, and shop travelers., • Certification Oversight: Administer welder qualification testing and maintain up-to-date performance records., • Audit Leadership: Coordinate and lead Authorized Inspector (A.I.) audits and National Board reviews, ensuring zero-defect reporting., • Testing & Validation: Supervise hydrostatic testing and conduct final quality validation of finished products prior to global shipment., • Supply Chain Quality: Conduct comprehensive quality audits of vendors and subcontractors to ensure material and service consistency., • Continuous Improvement: Identify systemic quality variances and implement Root Cause Analysis (RCA) and Corrective Actions (CAPA)., • Certifications: Active AWS CWI required; additional API or NACE certifications highly preferred., • Technical Expertise: Mastery of ASME (Sections I, VIII, IX), API, and AWS codes and regulatory frameworks., • Free HSA health plan or traditional PPO, • 401(k) with generous company match (Safe Harbor), • Dental, vision, and optional coverage like accident & critical illness insurance, • HSA and FSA accounts to save on healthcare costs, • Company-paid Life, Long Term Disability, and AD&D insurance, • Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program, • Discounts on gyms, shopping & entertainment, • Paid Time Off, • Paid Holidays, • Bereavement Leave This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #Bendel

Job Description Job Title: Maintenance Technician Job Description We are seeking a skilled Maintenance Technician to maintain and repair production equipment in a high-speed environment. Experience with bottling, canning, capping, or filler equipment is a valuable advantage. Candidates should possess mechanical experience with conveyors, pneumatic troubleshooting, and the ability to replace and repair motors and gears. Electrical experience with sensors, proximity switches, and relays is required due to the sensitivity and speed of the equipment. While PLC experience is not necessary, welding and fabrication skills, particularly TIG and Stick welding with stainless steel, are beneficial. Responsibilities • Perform maintenance mechanic duties to ensure the efficient operation of production equipment., • Troubleshoot mechanical issues with conveyors and pneumatic systems., • Replace and repair motors and gears as needed., • Conduct electrical troubleshooting with sensors, proximity switches, and relays., • Utilize welding skills, including TIG and Stick welding, for maintenance and repair tasks., • Mechanical experience with industrial machinery., • Electrical troubleshooting skills, particularly with AC electrical controls., • Proficiency in hydraulic and pneumatic systems troubleshooting., • Experience with advanced conveyors and palletizers., • Experience in automotive, industrial, or aircraft maintenance. Enjoy a competitive salary with ample room for raises and promotions. Benefit from upward mobility opportunities as the company promotes from within, rewarding new skills and hard work with raises and new positions. Participate in a bonus program that pays quarterly, with a strong average employee tenure due to fair management. Receive annual cost of living increases and access to comprehensive training programs. Work Environment The work environment can be cold in winter and hot in summer, with large bay doors open 24/7. A high sense of urgency is essential due to the fast-paced nature of the work. The supervisor is direct and highly knowledgeable, providing a challenging yet rewarding atmosphere for skill development. Job Type & Location This is a Contract to Hire position based out of Charlotte, NC. Pay and Benefits The pay range for this position is $20.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Charlotte,NC. Application Deadline This position is anticipated to close on Feb 27, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We're looking for Autobody Preppers with a minimum of 1 year of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Auto Body Repair Technician, you'll be expected to perform light bodywork, including: • Prepping, sanding, and buffing vehicles, • Removing and installing bumpers, • Minor plastic welding, • Small area bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Trailer Mechanic W/CDL Class-A License Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for a trailer mechanic with 2+ years of mechanical and/or tank trailer repair experience, and a CDL Class-A Driver license for our Charlotte, NC location! Address: 201 Black Satchel Drive, Charlotte, NC. 28216 Shift Hours: Monday through Friday, 7:30 AM to 4:00 PM, occasional overtime Pay Range: $19.00 to $36.00 per hour, dependent on experience. (Skill-based pay rate reviews and potential increases every 6 months.) Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • Must have a CDL-Class A license, • TIG aluminum, stainless or carbon welding experience (optional), • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job DescriptionSalary: $76,000 - $90,000 About JMS Our passion is our people and the positive impact they make. Since being established in 1962, Jim Myers & Sons, Inc (JMS)has become one of the nation's leading designers and manufacturers of water and water treatment equipment and systems. This success is the result of our employees' diverse technical and business expertise, which fuels collaboration and ongoing innovation. We use equal parts innovation, quality, and reliability to create comprehensive, solution driven product offerings for our customers. Learn more about us at . Why join the JMS team? • Family owned and oriented workplace, • Work and collaborate with a small team who has become one of the best in the industry, • Use industry-leading technology and the best tools available to ensure success, • Working in a stable industry with strong growth potential We are proud to offer: • Competitive base salary, • Bonus opportunities, • Company paidmedical, • Dental and life insurance, • 401K, • Excellent training, • Great family work environment, • Paid vacation and holidays Job Summary The Project Engineer position at Jim Myers & Sons, Inc. (JMS) is a vital member of theBusiness Unit. The Project Engineer is responsible for planning, coordinating, and overseeing projects from conception to completion. This role involves working closely with various stakeholders, including clients, project managers, and engineering teams, to ensure projects are completed on time, within budget, and to the required quality standards. Responsibilities • The Project Engineer has responsibility for project calculations, timing, and quality., • Adhere to project schedule and specifications to meet the projects time objectives and milestones., • Thoroughly examine project plans and specifications., • Conduct detailed calculations including process calculations, structural calculations, and other technical aspects of the project., • Write detailed calculation reports for project submittals., • Work with external Professional Engineer (PE) resources to obtain necessary approvals and certifications., • Obtain catalog cut sheets for project components and review them to ensure they meet design and project specifications., • Conduct thorough internal checks of all drawings and designs before submission to ensure accuracy and completeness., • Interface on technical issues with design, manufacturing, sourcing, and field installation, • Some travel to plant sites required for field measurements, installation support, and troubleshooting., • Follow all JMS, Inc. policies and procedures. Qualifications • High level of knowledge/experience with applying engineering principals to electro-mechanical equipment, • High level of proficiency with completing engineering calculations, • 5 years of experience with the design of mechanical equipment, weldments, and assemblies, • 5 years of experience with 3D & 2D design and detailing with SolidWorks & AutoCAD, • Ability to work effectively & efficiently with project team members on multiple projects simultaneously., • Strong communication skills including the ability to negotiate positive outcomes., • Experience with power transmission equipment including motors, gearboxes, chain drives, shafts & bearings., • Requires a high level of proficiency in Microsoft Office: Word, Excel, PowerPoint, & Outlook, • Desire to learn and to continue developing knowledge and skills. Desired Experience and Skills • Knowledge of fabrication processes such as bending, punching, welding, machining, etc., • Experience with the municipal water and wastewater industry a plus, • Experience with Risa, Tekla, or equivalent structural design and detailing software, • Experience with FEA and/or CFD is a plus, • Professional Engineering License preferred Education • Masters or Bachelors Degree in Mechanical Engineering or another relevant field of engineering with equivalent combination of experience Jim Myers & Sons, Inc is an Equal Opportunity Employer This role is not eligible for Visa sponsorship.

Job Description We're looking for Autobody Preppers with a minimum of 3 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Experienced Auto Body Repair Technician, you'll be expected to perform bodywork on multiple panels, including: • Heavy plastic welding, • Minor metal pulling, • Roof and rocker panel repair, • Large area, heavy bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Autobody Preppers with a minimum of 5 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Heavy Body Technician, you'll be expected to train other autobody technicians and perform extensive bodywork on multiple panels, including: • Heavy plastic welding/stapling, • Heavy metal pulling, straightening, shrinking, and stud welding Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Job Title: Maintenance Technician Job Description We are seeking a skilled Maintenance Technician to maintain and repair production equipment in a high-speed environment. Experience with bottling, canning, capping, or filler equipment is a valuable advantage. Candidates should possess mechanical experience with conveyors, pneumatic troubleshooting, and the ability to replace and repair motors and gears. Electrical experience with sensors, proximity switches, and relays is required due to the sensitivity and speed of the equipment. While PLC experience is not necessary, welding and fabrication skills, particularly TIG and Stick welding with stainless steel, are beneficial. Responsibilities • Perform maintenance mechanic duties to ensure the efficient operation of production equipment., • Troubleshoot mechanical issues with conveyors and pneumatic systems., • Replace and repair motors and gears as needed., • Conduct electrical troubleshooting with sensors, proximity switches, and relays., • Utilize welding skills, including TIG and Stick welding, for maintenance and repair tasks., • Mechanical experience with industrial machinery., • Electrical troubleshooting skills, particularly with AC electrical controls., • Proficiency in hydraulic and pneumatic systems troubleshooting., • Experience with advanced conveyors and palletizers., • Experience in automotive, industrial, or aircraft maintenance. Enjoy a competitive salary with ample room for raises and promotions. Benefit from upward mobility opportunities as the company promotes from within, rewarding new skills and hard work with raises and new positions. Participate in a bonus program that pays quarterly, with a strong average employee tenure due to fair management. Receive annual cost of living increases and access to comprehensive training programs. Work Environment The work environment can be cold in winter and hot in summer, with large bay doors open 24/7. A high sense of urgency is essential due to the fast-paced nature of the work. The supervisor is direct and highly knowledgeable, providing a challenging yet rewarding atmosphere for skill development. Job Type & Location This is a Contract to Hire position based out of Charlotte, NC. Pay and Benefits The pay range for this position is $20.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Charlotte,NC. Application Deadline This position is anticipated to close on Feb 25, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What’s in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you’ll be doing: • Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments., • Assist other maintenance personnel with emergency and non-emergency repairs., • Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems., • Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications., • Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required., • Perform daily and weekly safety checks on boilers and make necessary repairs as required., • Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures., • Performing basic welding activities to effect repairs on facilities and equipment., • Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual., • Utilize a Computerized Maintenance Management System., • Perform other duties as assigned by leadership. Qualifications What we’re looking for: • High school diploma or GED equivalent required., • Two-year technical degree in an appropriate background is preferred., • Must be at least 18 years of age., • Knowledgeable in industrial maintenance of facilities and equipment., • Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered., • Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment., • Ability to read blueprints and schematics is required., • Ability to read and understand maintenance literature printed in English required., • Basic computer and Microsoft Office skills is required., • Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver’s license and a safe driving record are required. • Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Job Description Overview: We are seeking a skilled and reliable Mobility Technician to diagnose, install, maintain, and repair wheelchair-accessible vehicles and adaptive driving equipment. This includes servicing lifts, ramps, hand controls, transfer seats, power kneel systems, and secondary battery systems. The technician must ensure all modifications meet ADA compliance, manufacturer specifications, and customer safety standards. Primary Responsibilities: • Install and repair mobility equipment including BraunAbility, VantageMobility, and other major brands, • Perform diagnostics and preventive maintenance on wheelchair lifts, interlocks, and electrical systems, • Wire and test auxiliary battery setups, relays, and inverter systems, • Ensure ADA and NHTSA compliance on every install, • Use schematics, service manuals, and OEM documentation for accurate repairs, • Document all work performed using shop software or ROs, • Maintain a clean and organized work area and keep up with required certifications, • Assist with inspections and state compliance as needed, • 2+ years of mechanical or electrical experience (automotive, RV, or upfitting preferred), • Strong understanding of 12V wiring and basic fabrication, • Ability to lift up to 75 lbs and work in a variety of positions, • Valid driver's license and clean driving record, • Professional, dependable, and detail-oriented, • Experience with BraunAbility, Ricon, or VMI products, • ASE certifications or Braun/VMI/Ricon training a plus, • DOT inspection experience a bonus, • We will pay for all BraunAbility, VMI, NMEDA, and SureGrip training

Job Description Are you open for a new mechanic position with a fantastic, growing company? Do you have a year or two mechani experience? Do you have industrial maintenance experience? Do you have experience in 1 or 2 maintenance trades and components (ex. electrical, welding, pipefitting, fabrication, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, and hydraulic and pneumatic systems? Then send me your resume immediately! This is a great growth opportunity with excellent benefits, great pay and overtime available.

Job Description Division: 110 - CHA-SVC Position: Overhead Crane Tech Reports To: Branch Manager Employee Type: Full-time Pay Range: $32.00-$41.00 an hour Job Summary A field service technician will provide quality installation, inspections, maintenance and repair service for hoist and crane equipment. A field service technician will also uphold the highest level of professional integrity and ethics as required to instill customer confidence and continued success in service. Essential Duties · Troubleshoot, repair and inspect overhead cranes and hoists, below the hook devices and other lifting devices. · Perform scheduled preventive maintenance activities on equipment. · Support customers by effectively interfacing with customer and office in repairing equipment as needed. · Evaluate and make recommendations regarding required repairs for customers. · Maintain rapport with customers by examining complaints; identifying solutions; suggesting improved methods and techniques; and recommending system improvements. · Service overhead crane systems by performing quality installations; performing OSHA/ANSI equivalent inspections; documenting and completing warranty work; troubleshooting breakdowns; performing preventive maintenance; and responding to emergency service/breakdown calls. · Document service and installation actions by completing forms, reports, and inspection checklist. · Builds and maintains customer confidence by maintaining good response time, informing customer of problems, and completing the job in a timely manner. · Maintain professional presentation, timeliness, appearance, and organization in all areas. Key Performance Indicators (KPIs) Indicators of success and satisfactory job performance will include but may not be limited to: · TBD Other subjective factors considered in assessing job performance include the ability to balance applied expertise and knowledge with “soft skills” such as interpersonal skills, communication ability, aptitude for learning and adaptation, computer skills, abstract and conceptual thinking, and accurate planning and prediction of operational activities. Required Skills and Knowledge · Ability to work under pressure and deadlines · Ability to work independently. · Ability to work well with others. · Ability to fabricate and weld structures (structural welding only if certified). · Ability to perform inspections to OSHA/ANSI criteria · Ability to troubleshoot electrical circuits, single or three phase and AC or DC. · Ability to assemble and repair complex machinery. · Excellent communication skills. · Ability to work at heights. · Willingness to travel. · Safety oriented. · Maintain confidentiality. · Quality and results driven. · Good driving record. · Ability to drive a service truck with a trailer. · Ability to drive in in-climate weather including but not limited to rain, sleet, snow, high wind, and icy conditions. · Ability to drive at night. · Ability to use hand tools, power tools...etc. · Ability to lay out column spacing for new installs. · Ability to work a flexible schedule, including overtime. Supervisory Responsibility This position does not have supervisory responsibilities. Company DescriptionAce Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.Ace Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.

Job Description Join Lee Transport Equipment as a Truck Equipment Installer! Our Charlotte, NC location is hiring skilled professionals to assemble, install, and customize heavy-duty truck bodies and equipment. What You'll Do: • Install service bodies, van packages, hoists, cranes, liftgates, strobes, inverters, and more, • Assemble shelving, ladder racks, and electrical components, • Inspect and test builds to ensure top-notch quality, • Follow work instructions and meet our high standards What We’re Looking For: • Mechanical or welding experience (a plus!), • Positive attitude and eagerness to learn, • Driver’s license required, • Must have or be willing to purchase tools Why Work With Us? • Competitive wages, • Comprehensive benefits package, • Opportunities for overtime HISTORY Lee Transport Equipment, Inc. is a family owned and operated business that has been a leader in the commercial truck and van equipment industry since 1965. Specializing in commercial upfits such as service bodies, platform and dump bodies as well as van interiors. Headquartered in Columbia SC with a branch location in Charlotte NC, effectively serving markets that range from individual contractors, dealers, fleets and leasing companies, to State and Federal government entities, in an area that encompasses all of South Carolina and the majority of North Carolina and Georgia. Through ever-changing business climates, Lee Transport Equipment, Inc. has always held true to our values of: Trust Dedication Character Discipline Integrity Humility Passion These values provide the building blocks for a customer-centric culture of service that supports our ultimate goal: to do the right thing – in every situation, for every customer, and every team member.At Lee Transport Equipment, we are continuously improving our performance on your behalf, while searching for the newest and most innovative products and materials to help make you one step ahead of your competition. We provide the highest quality in custom design and fabrication only from the best manufacturers – but the true value is in our relationship. When you become a client of Lee Transport Equipment, we partner with you to assist in determining your needs, provide design options to meet those needs in a cost-effective manner, and continuously strive to increase efficiency and safety in the field.\r\n\r\nHISTORY\r\nLee Transport Equipment, Inc. is a family owned and operated business that has been a leader in the commercial truck and van equipment industry since 1965. Specializing in commercial upfits such as service bodies, platform and dump bodies as well as van interiors. Headquartered in Columbia SC with a branch location in Charlotte NC, effectively serving markets that range from individual contractors, dealers, fleets and leasing companies, to State and Federal government entities, in an area that encompasses all of South Carolina and the majority of North Carolina and Georgia.\r\n\r\nThrough ever-changing business climates, Lee Transport Equipment, Inc. has always held true to our values of:\r\n\r\nTrust\r\nDedication\r\nCharacter\r\nDiscipline\r\nIntegrity\r\nHumility\r\nPassion\r\nThese values provide the building blocks for a customer-centric culture of service that supports our ultimate goal: to do the right thing – in every situation, for every customer, and every team member.

Job DescriptionSalary: $90,000 - 105,000 About JMS Our passion is our people and the positive impact they make. Since being established in 1962,Jim Myers & Sons, Inc (JMS)has become one of the nation's leading designers and manufacturers of water and water treatment equipment and systems. This success is the result of our employees' diverse technical and business expertise, which fuels collaboration and ongoing innovation. We use equal parts innovation, quality, and reliability to create comprehensive, solution driven product offerings for our customers. Learn more about us at . Why join the JMS team? • Family owned and oriented workplace, • Work and collaborate with a small team who has become one of the best in the industry, • Use industry-leading technology and the best tools available to ensure success, • Working in a stable industry with strong growth potential We are proud to offer: • Competitive base salary, • Bonus opportunities, • Company paidmedical, • Dental and life insurance, • 401K, • Excellent training, • Great family work environment, • Paid vacation and holiday Job Summary Jim Myers & Sons, Inc. (JMS) is seeking an experienced Supplier & Product Quality Engineer to support the quality, compliance, and performance of engineered-to-order stainless steel equipment used in municipal water and wastewater treatment facilities. This is a hybrid, hands-on quality engineering role focused on supplier and vendor product quality, quality planning, specification review, and compliance throughout the product lifecyclefrom quotation and design review through fabrication, inspection, delivery, and warranty support. The Quality Engineer works cross-functionally with Engineering, Purchasing, Manufacturing, and Business Development, and interfaces directly with suppliers, subcontractors, customers, and consulting engineers. The ideal candidate has practical experience in fabricated metal products, understands applicable codes and standards, and is comfortable working both in an office environment (at our location in Charlotte) and at supplier or manufacturing locations (which may require up to 25% travel). Key Responsibilities Supplier & Vendor Quality • Lead supplier quality activities, including audits, inspections, surveillance, and corrective actions at supplier facilities, • Develop and maintain inspection and test plans (ITPs) for fabricated components, assemblies, and processes, • Evaluate supplier compliance with drawings, specifications, codes, and JMS quality requirements, • Support supplier qualification, performance monitoring, and continuous improvement initiatives Quality Planning & Compliance • Perform quality and specification reviews during RFQ, order entry, and engineering phases, • Identify gaps between customer requirements, industry codes, and JMS standards and support resolution prior to fabrication, • Create, review, and maintain quality documentation including:, • Quality Plans, Inspection and Test Plans (ITPs), • Nonconformance Reports (NCRs), • Corrective and Preventive Actions (CAPA), • Quality Inspection Records Manufacturing & Internal Quality • Support manufacturing quality through process audits, in-process inspections, and final inspections, • Conduct and document internal audits of JMS processes and systems, • Verify employee training, qualifications, and adherence to quality and safety requirements Problem Solving & Continuous Improvement • Investigate quality issues using root cause analysis tools (5 Whys, Fishbone, etc.), • Drive corrective actions with internal teams and suppliers, • Support continuous improvement across Engineering, Manufacturing, Procurement, and Warranty processes Cross-Functional & External Engagement • Collaborate closely with Engineering, Purchasing, Manufacturing, and Business Development, • Interface with suppliers, subcontractors, customers, consulting engineers, and owners, • Support customer and third-party audits as required Required Qualifications • 5+ years of relevant quality, manufacturing, or supplier quality experience, • Experience with fabricated metal products, including stainless steel and carbon steel, • Ability to read and interpret engineering drawings, specifications, codes, and standards, • Knowledge of fabrication processes including:, • Welding, bending, punching, • Manual and CNC machining, • Coating Operations, • Working knowledge of applicable standards such as:, • AWS D1.1 and AWS D1.6, • ASME Section IX, • ASTM, • Experience conducting internal and external audits, including supplier audits, • Strong analytical, problem-solving, and documentation skills, • Proficiency in Microsoft Office (Word, Excel, Outlook), • Familiarity with ERP systems, • Ability to lift to 50 lbs, • Willingness to travel up to 25% Preferred Qualifications • Bachelors degree in Engineering (Mechanical, Manufacturing, or related), • ASQ Certified Quality Engineer (CQE), • ISO 9001 internal or lead auditor training/certification, • AWS ACWI or CWI certification, • Experience with Epicor ERP, • Familiarity with Power BI, Power Apps, or SQL-based analysis This role is not eligible for Visa sponsorship. JMS is an Equal Opportunity Employer.

Job Description Mobile Diesel Technician (A/B Level) – Charlotte, NC & Surrounding Areas (Field - Based) Locations: Charlotte, NC & (Surrounding Areas) Are you an experienced Diesel Technician looking for a rewarding career with high earning potential and opportunities for growth? We are seeking skilled and motivated individuals to join our team as Mobile Diesel Technicians. This role involves traveling to client sites to provide maintenance, repairs, and diagnostics for gas and diesel vehicles and equipment. If you are hardworking, customer-focused, and thrive in a dynamic work environment, we want to hear from you. Job Responsibilities • Travel to customer locations to perform on-site maintenance, diagnostics, and repair of gas and diesel vehicles and equipment., • Conduct engine services, brake repairs, inspections, cooling system services, and more., • Respond to breakdowns, DOT inspections, and PM services as needed., • Maintain regular communication with managers regarding job status and scheduling., • Interact professionally with customers to provide updates and ensure satisfaction., • Maintain a well-stocked and organized service truck, including tools, and inventory, • Minimum 2 years' experience in diesel truck and trailer repair, maintenance, and diagnostics., • DOT Inspection Certified and Air Brake Certified (Additional certifications preferred)., • Must have a valid driver’s license and a clean DMV record (No moving violations)., • Own a sufficient tool inventory to perform required job duties., • Strong customer service and communication skills – ability to work directly with clients., • High attendance and punctuality standards., • Experience working on various makes, models, and types of repairs., • Ability to stand, bend, lift 50+ lbs., and sit for extended periods in varied temperatures and weather conditions., • Welding experience. Pay-for-Performance Compensation: Earn between $72,000 - $163,000 annually depending on skill level, experience, and efficiency. Earn $32 to $45 per hour on a performance-based pay scale Comprehensive Benefits Package Includes: • Health, Dental & Vision Insurance – Coverage for employees and families., • 401(k) Profit Sharing Retirement Plan – Employer-matching contributions., • Paid Time Off & Holidays – Competitive PTO for work-life balance., • Disability & Life Insurance – Protection for you and your family., • Employee Assistance Program (EAP) – Confidential support for mental health and financial wellness., • Pet Insurance – Optional coverage for pets. If you are looking for competitive pay, top-tier benefits, and a company that values your skills, apply today. We look forward to welcoming dedicated and experienced diesel technicians to our growing team. We Value Equal Opportunity National Fleet Management is an equal opportunity employer. We are committed to creating a workplace where all qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, genetic information, or any other legally protected characteristic. We believe diverse perspectives strengthen our teams, improve decision-making, and help us better serve our customers across all markets. Drug-Free Workplace National Fleet Management maintains a drug-free workplace. Employment may be contingent upon compliance with applicable drug and alcohol policies, including pre-employment and post-incident testing, where permitted by law.

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TAG Refrigeration is seeking a Commercial Refrigeration Pipefitter for construction and installation projects in and around the Charlotte, NC area. Role Summary: The Commercial Refrigeration Pipefitter is responsible for the installation, fabrication, and maintenance of refrigeration piping systems supporting commercial and supermarket refrigeration equipment. This role works closely with refrigeration technicians and construction teams to ensure piping systems are installed safely, efficiently, and in compliance with industry standards, mechanical codes, and manufacturer specifications. Roles and Responsibilities: • Install, align, measure, and secure refrigeration piping systems for new construction, remodels, and equipment replacements, • Fabricate and assemble copper, steel, and other refrigeration piping using brazing, soldering, threading, and welding techniques, • Lay out and route piping in coordination with refrigeration technicians, electricians, and other trades, • Install valves, fittings, hangers, supports, and insulation per project drawings and specifications, • Assist with pressure testing, evacuation, and charging of refrigeration systems, • Ensure all piping connections are leak-free and meet EPA, mechanical code, and company standards, • Support system start-ups and commissioning as needed, • Inspect piping systems for wear, corrosion, vibration, or damage, • Repair or replace defective piping, valves, fittings, insulation, and supports, • Respond to service calls involving piping failures or refrigerant leaks, • Maintain accurate documentation of materials, piping layouts, and refrigerant-related activities, • Follow OSHA, EPA, and company safety policies for refrigerants, hot work, ladders, and confined spaces Skills and Qualifications: • 3+ years of pipefitting experience in a commercial or industrial environment, • Strong brazing skills with copper and refrigeration-grade piping, • Working knowledge of commercial refrigeration systems including rack systems, condensers, and evaporators, • Ability to read and interpret blueprints, schematics, and piping diagrams, • Strong attention to detail and commitment to quality workmanship, • Ability to work independently and as part of a team, • Valid driver’s license with the ability to travel to job sites Preferred Qualifications • Experience working in supermarket or commercial refrigeration environments, • EPA 608 Certification, • OSHA 10 or OSHA 30 certification, • Welding experience Benefits: • Competitive pay, • Medical, dental, and vision insurance options, • Retirement savings plan with company contributions (401(k) or equivalent), • Paid vacation, holidays, and sick time, • Year-round, steady work, • Opportunities for career growth advancement, • Supportive, team-based work environment

Job Description Our client, a steel fabrication company, is seeking a Senior Estimator to join their team. Position Summary The Senior Estimator prepares and coordinates detailed cost estimates for structural and miscellaneous steel projects while ensuring accuracy, consistency, and risk awareness across bids. This role bridges technical estimating expertise with leadership support, acting as a standard for other estimators and contributing to strategy and process improvement. Responsibilities • Lead the preparation and coordination of estimates for complex projects, ensuring complete and traceable takeoffs using estimating software., • Review and validate estimates prepared by junior estimators; provide constructive feedback and guidance to improve accuracy and efficiency., • Issue and track RFIs to General Contractors; ensure all responses are integrated into final pricing., • Collect, level, and compare vendor, subcontractor, and supplier quotes for accuracy and completeness., • Analyze company data, monitor budgets and prices using software packages., • Identify labor, material, costs and time requirements by researching proposals, blueprints, and any related documents., • Prepare detailed cost estimate reports and present job Recaps and bid summaries to the Estimating Manager and President when requested. Necessary Attributes: • Responsive Communication, • Positive Attitude, • Data and Information Analysis, • Teamwork, • Time Management, • Strategic Planning, • Attention to Detail, • Problem Solving Qualifications Required • Bachelor’s in Construction Management, Engineering or related field or equivalent experience in construction/steel estimating., • Minimum 8 years of experience estimating structural/miscellaneous steel (Medical, Commercial, Industrial, Higher Education project experience preferred)., • Strong knowledge of structural steel design, fabrication, and erection practices, AISC codes, AWS welding standards., • Experience soliciting and leveling vendor/subcontractor quotes and preparing complete cost estimate reports., • Hands-on RFIs, scope reviews, and budget monitoring within estimating software. Preferred • Proficient with Trimble PowerFab estimating software or equivalent., • Analytical, detail-oriented, and rigorous with risk assessment and cost validation., • Experience mentoring, training, or leading junior or entry level estimators., • Clear communicator who collaborates effectively with GCs, subs, and leadership. Benefits All active full-time employees are eligible to receive health, dental, vision, and ancillary insurance as outlined in the employee handbook, in addition to a 401(k) retirement plan and paid vacation benefits.

Job Description Reports to: President, Head of Sales & Estimating Environment: In our Belmont, NC office, working with Trimble PowerFab estimating software. Steel Specialty is a quickly growing 2nd generation Steel Fabrication company with a strong culture - collaborative, family-friendly, professional & personable. 50+ years ago, we started as a Miscellaneous Steel Fabricator and later added Structural Steel to our wheelhouse. We manage jobs for our customers in Healthcare, Commercial, Industrial, Higher Education etc. We are proud of our long-standing reputation for craftsmanship, reliability, and integrity. We are committed to creating an excellent workplace, supporting the growth & success of our employees and partners, and delivering high-value, on-time solutions to our customers. What you will do: Prepare & coordinate detailed cost estimates for complex structural & miscellaneous steel projects, ensuring complete & traceable takeoffs, accuracy, consistency, and risk awareness across bids. Lead & develop a team of Estimators. Bridge your technical estimating experience with leadership's support, act as a standard for other Estimators, and contribute to our organizational strategy & any process improvement initiatives. * Review & validate estimates prepared by junior estimators; provide constructive feedback & guidance to improve accuracy & efficiency. * Issue & track RFI’s to General Contractors; ensure all responses are integrated into final pricing. * Collect, level, and compare vendor, subcontractor, and supplier quotes for accuracy & completeness. * Analyze company data, monitor budgets & prices using software packages. * Identify labor, material, costs and time requirements by researching proposals, blueprints, and related documents. * Prepare detailed cost estimate reports & present job Recaps & bid summaries to Estimating Manager / President when requested. * Some travel within 60 miles of office - no overnight travel Who you are: * Responsive teammate & communicator with a positive attitude. * Cross collaborator with GC’s, subs, and leadership. * Analytically minded and high attention to detail. * Time management expert. Strategic thinker & planner. Strong problem solver. What you’ll need: * Bachelor’s degree in Construction Management, Engineering, or related field OR equivalent experience in construction/steel estimating. * 8+ years of experience estimating structural / miscellaneous steel (Medical, Commercial, Industrial, Higher Education projects preferred). * Strong knowledge of structural steel design, fabrication, and erection process, AISC codes, and AWS welding standards. * Experience soliciting & leveling vendor / subcontractor quotes & preparing complete cost estimate reports. * Hands-on RFI’s, scope reviews, and budget monitoring within estimating software. What’s nice to have: * Proficiency in Trimble PowerFab estimating software or equivalent. * Rigorous with risk assessment and cost validation. * Experience mentoring, training, or leading junior / entry level Estimators. What you’ll gain: * Be a part of a team that is highly emotionally intelligent and expanding quickly, with a passion for high quality service and family friendly culture. * Base salary negotiations depend on experience & will be discussed during your first phone interview. * Annual end of year bonus * 401k retirement fund with company matching * Access to health, dental, vision, and ancillary insurance * Employer paid medical premiums * Paid Vacation * Opportunity to grow internally - ask us about your growth path with Steel Specialty! Have questions or want an update on your application? Call or text Amanda @ 980.553.0103 or email

Job Description Company Overview: State Industrial Solutions, SIS, a Gexpro Services company, is an industry leader delivering streamlined supply solutions to challenging business requirements. As a value-added distributor, fabricator, and integrator of electrical and electronic hardware, we work with OEM's, contract manufacturers, and other manufacturers supporting complex supply chains. We work with customers to develop solutions which improve operations. Proven customer benefits include reduced total cost, improved inventory turns, and controlled quality. Company Benefits: Gexpro Services offers a comprehensive benefits package that includes: • Medical, Dental, Vision and Life insurance., • Flexible spending accounts, • Hybrid work schedule, • Employee assistance program, • Tuition assistance program, • Health Wellness programs, • Pet insurance, • Eligible employees are able to contribute to our 401(k) immediately with a competitive match., • Several paid holidays and paid time off that includes personal, sick and vacation time. Position Summary: A Technician employee cleans and operates factory equipment, works on an assembly line, puts together, and inspects products, and adheres to all factory safety guidelines and standards. The below job description outlines the essential duties and responsibilities and qualification for a Level I Technician: Essential Duties & Responsibilities: • Learn to perform every aspect of production and assembly., • Read blueprints, build of materials, and work instructions to properly complete work orders., • Follow procedures for the assembly/disassembly, soldering, welding, machining, and analysis of a variety of electro-mechanical devices., • Perform testing on units to ensure functionality., • Maintains and updates the results related to various tests and inspection procedures., • Troubleshoot electrical and mechanical problems with the completed assemblies, ensuring that the product conforms to design specifications and quality standards., • Flexible to help out in other areas as needed, including packaging units for shipment., • Completes work orders and requests in a timely fashion., • Assist other technicians to complete work orders., • Keeps the workstations clean and organized., • Use proper tools, PPE, and equipment to prevent unexpected incidents., • Applies best safety practices to maintain a safe work environment., • Performs accurate and quality work to meet customer requirements. Qualifications: • High School or GED preferred., • Previous experience in factory or warehouse setting is preferred., • Proven work experience as an Assembly Technician or similar role., • Good eye-hand coordination to construct small parts and pieces into a final product., • The ability to use various hand tools to produce a final product., • Basic knowledge of electrical design and control circuits., • Basic knowledge of electronics & electro-mechanical assemblies., • Ability to operate electronic diagnostic equipment., • Ability to read and follow schematics, blueprints, and instructions as delivered for each product., • Ability to learn new technology, procedures, and specifications. DISCLAIMER: The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. “Gexpro Services is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.”

Job Description Production Manager Location: Charlotte, NC Company: Bendel Tank and Heat Exchanger, LLC Mandatory Requirements • Management Level: This is a mid-level management position; the candidate must be comfortable navigating both shop-floor leadership and administrative reporting., • Reporting Structure: This position reports directly to the Plant Operations Manager., • Welding & Fabrication: Must have significant, verifiable experience in metal fabrication and welding processes., • Managerial Experience: Must have a proven track record of leadership and management within a production or shop environment. Bendel Tank and Heat Exchanger, LLC, a division of TransTech Group, LLC, is a leading manufacturer of custom Carbon Steel, Stainless Steel, and Nickel Alloy vessels per ASME, API, TEMA, and UL specifications. Having been in business for over 50 years, Bendel serves several industries including: chemical, petrochemical, pharmaceutical, and industrial food manufacturing. Bendel has a strong company culture built on a family atmosphere where success is defined by the impact on the lives of our stakeholders. Job Summary The Production Manager will oversee daily operations in our metal fabrication shop, ensuring projects are completed safely, on time, and to the highest quality standards. This role is responsible for planning, scheduling, resource management, and leading a team to achieve production goals while fostering a positive and efficient work environment. Tasks and Responsibilities • Plan and Coordinate: Develop and maintain production schedules to meet project deadlines., • Lead and Manage: Supervise and motivate shop employees, including hiring, training, performance management, and professional development., • Ensure Quality and Safety: Enforce safety regulations and maintain a clean, organized, and accident-free workplace. Champion product quality to exceed company and client expectations., • Budget and Cost Control: Manage project budgets, monitor man-hours, and control production costs., • Technical Oversight: Review technical drawings and specifications for accuracy and compliance before production., • Continuous Improvement: Identify and implement operational improvements to enhance efficiency and productivity., • Customer and Vendor Interaction: Communicate effectively with stakeholders, vendors, and customers to ensure project requirements are met., • Strong technical knowledge of fabrication processes, welding techniques, and blueprint reading., • Proven ability to lead, motivate, and develop teams., • Excellent organizational, planning, and time management skills., • Strong decision-making and problem-solving abilities., • Proficiency in Microsoft Office Suite and project management software., • Minimum 5 years of management experience in metal fabrication or a related industry., • Comprehensive Health: Free HSA health plan or traditional PPO; benefits start the 1st of the month after 30 days., • Financial Security: 401(k) with generous company match (Safe Harbor) and company-paid Life, Long Term Disability, and AD&D insurance., • Savings Accounts: HSA and FSA accounts to save on healthcare costs., • Support: Confidential support for mental health, family matters, and legal concerns through our Employee Assistance Program., • Extra Perks: Discounts on gyms, shopping, and entertainment. #Bendel

Job DescriptionSalary: $23-$26 The Welder position is a vital member of the Manufacturing Team contributing to our safety culture, providing high productivity, high quality welds, flexibility in assignments, and supporting continuous improvement in the following capacities: Responsibilities include: • Perform FCAW (Fluxcore) and Tig welds on a variety of thicknesses, sizes, and orientations of equipment, • Read and interpret engineered drawings and job travelers, • Determine the appropriate welding equipment or method based on requirements, • Use basic hand tools such as tape measure, level, square, etc., • Follow established safety and quality policies, procedures, and practices, • Safely use overhead crane and lifting equipment, • Maintain and complete all required documentation and electronic records Required Qualifications • Pass the GTAW vertical test, FCAW vertical test, • Positive mindset with high energy and ability to self-manage, • Flexible work hours (standard shift 5:00 3:30, M-Th. Friday and Saturday OT as required), • Ability to lift 75 lbs. Desired Experience and Skills • Knowledge of fabrication processes such as bending, punching, welding, etc, • Read tape measure, • Perform mathematical calculations required for fabrication, • Understand and comfortable adding and subtracting fractions and decimals, • Basic tool and shop knowledge

Job DescriptionSalary: $65K - 77K About JMS Our passion is our people and the positive impact they make. Since being established in 1962,Jim Myers & Sons, Inc (JMS)has become one of the nation's leading designers and manufacturers of water and water treatment equipment and systems. This success is the result of our employees' diverse technical and business expertise, which fuels collaboration and ongoing innovation. We use equal parts innovation, quality, and reliability to create comprehensive, solution driven product offerings for our customers. Learn more about us at . Why join the JMS team? • Family owned and oriented workplace, • Work and collaborate with a small team who has become one of the best in the industry, • Use industry-leading technology and the best tools available to ensure success, • Working in a stable industry with strong growth potential We are proud to offer: • Competitive base salary, • Bonus opportunities, • Company paidmedical, • Dental and life insurance, • 401K, • Excellent training, • Great family work environment, • Paid vacation and holidays Job Summary: TheDetailing position at Jim Myers & Sons, Inc. (JMS) is a vital member of the Operations/Detailing Teamand is adiverse high pacedposition. A Detaileris responsible forthedevelopment of drawings, plans, and other documents. This includesdrawing layouts,engineering drawings, and detailed fabrication prints. The Detailershould be comfortable in amanufacturingenvironment andhaveexperience with sheet metal components and multibody weldments. Responsibilitiesinclude: • Create detailedfabrication leveldrawing packagesfor projects that are visually appealing and functionally attractive, • Work with themanufacturing departmentto support assembly of components per drawings, • Strong ability tounderstandmechanical equipment withhigh attention to detail, • Ability toworkeffectively & efficientlywith projectteam memberson multiple projects simultaneously, • Strong analytical andproblem-solvingskills as well as logical thought process, • Follow all JMS, Inc.policiesand procedures Qualifications • 2yearsofexperience withcreating drawings ofweldments and assemblies, • 1yearsofexperience with 2Ddetailing inAutoCADa plus, • Strong communicationskills including the ability tonegotiate positive outcomes, • Experience with power transmission equipment including motors, gearboxes, chain drives, shafts & bearings, • Requiresa high levelofproficiencyinMicrosoft Office: Word, Excel, PowerPoint, & Outlook, • Desire to learn and to continue developing knowledge and skills Desired Experience and Skills • Knowledge of fabrication processes such as bending, punching, welding,machining,etc., • Experience with themunicipal water and wastewater industrya plus, • Experience with material handling systems (conveyors and bulk storage) a plus, • Experience with electrical power,instrumentationand controls a plus, • ExperienceapplyingGD&Tis strongly desiredor certification in GD&T is aplus Education • CertifiedAssociates Degree in Mechanical, • Drafting/Engineeringor other relevant field of engineering with equivalent combination of experience Jim Myers & Sons, Inc is an Equal Opportunity Employer This position is not eligible for Visa sponsorship.

Job DescriptionDescription:We create exceptional theatre experiences, inspiring generations to explore the wonder of their world. Children’s Theatre of Charlotte (CTC) is proud to be an organization where a dynamic mix of talented, committed, and enthusiastic people gather to do their best work. As we inspire generations to explore the wonder of our world, we desire to see the unique and amazing, expanding tapestry of this world and community reflected in all our programming, behind the scenes, and in our team members, board, and volunteers. WHAT WE DO… Children’s Theatre of Charlotte is a national leader in Theatre for Young Audiences and is recognized for the breadth and strength of its programs. We are dedicated to creating vibrant and engaging theatre experiences, both on the stage and in the classroom. Our typical season consists of large book musicals, as well as more intimate productions. Generally, we produce 7 - 9 Mainstage shows, 2 elementary school tours, and a preschool tour annually. We are a professional theatre creating shows for children, not by children, however we generally cast student actors in one or two shows throughout the season. Our production season runs September to June. WHAT YOU WILL DO… We rely on our on-call Theatre Technical Staff to provide their technical theatre expertise in all areas of the technical theatre fields including costumes, lighting, sound, loading, rigging, prop and carpentry. These are as-needed, project based jobs that vary from show to show and season to season. Considering joining our team if: • You are open to project based work that can last for 1-2 days up to 3-4 weeks., • You have the flexibility to occasionally work nights and weekends, • Carpenters – Responsible for the construction of set pieces. Carpentry skills are essential. Welding experience a plus. Assist with load-ins, load-outs, scenic notes, and other duties as assigned., • Scenic Artists – Assisting Charge Scenic on painting and finishing scenic elements and backdrops. Scenic painting and/or fine art skills are essential, • Props Artisans – assist the Prop Supervisor in all activities and safety of the Prop Shop and storage spaces. Assist in the construction, fabrication and acquisition of all props for performance and rehearsal for all shows in a timely fashion. Assist in the maintenance and repair of props for all performances. Help document and maintain props from rented packages. Maintain a safe, secure, clean + organized office, shop and work space Fabricate all hand props, set dressing and furniture for productions. Necessary skills may include upholstery, carpentry, model building, etc., • Electricians –Ability to read plots and paperwork. Load-in and changing over lighting and electrical elements for each show. Keep the electrics shop and work areas clean and safe. Ability to safely lift 50+lbs. Ability to work safely at height 15'+. Experience with rigging and fly system and experience loading and unloading weight from a fly system preferred. Communication skills, ability to work independently and with a time and a positive attitude are a must. Must have the ability to multi-task and work quickly with attention to detail. Knowledge of lighting software programs (Vectorworks, Lightwright, EOS) preferred., • Lightboard Operators – Running light board for some rehearsals and all schedule performances of show assigned to. Check and maintain equipment during production runs. Pre/Post show duties as required by the production. Requires general knowledge of theatrical lighting equipment, ability to read lighting paperwork and plot; operate ETC Eos Family consoles. Programming knowledge is a plus. Must be able to operate common power tools; able to safely lift 50+lbs; able to work safely at height 15'+. Experience with fly systems preferred. Communication skills, ability to work independently and with a time and a positive attitude are a must., • Soundboard Operators – Must be familiar proficient with Q-Lab. Responsible for tuning the house and running the cues for the show among other duties. operates the theatre’s audio control system., • Sound Mixer – A more skilled Soundboard Operator necessary for larger shows in which mics are worn. Experience in line mixing is essential., • Costume Shop Stitchers - Stitches, alters, and finishes all costumes under the supervision of the Lead Cutter/ Draper and the Costume Shop Manager. Must have demonstrated experience in hand and machine sewing techniques (industrial or domestic), and excellent garment construction skills. Needs to be able to follow directions, with previous professional theatrical costume shop experience preferred. Needs strong time-management skills and interpersonal skills, and the ability to work in a fast-paced, energized, and quickly changing environment. Must have a proactive approach to problem-solving with strong decision-making skills. Needs to be detail-oriented, with the ability to prioritize efficiently and multi-task, be self-directed, and take initiative. Physical requirements and working conditions include prolonged periods of sitting and working on a sewing machine and the ability to lift and move 25 lbs. Typical working hours are during the day, with possible weekend/ holiday flexibility needed., • Wardrobe Supervisor- Supervises all Wardrobe Run Crew. Has the same listed responsibilities as Wardrobe Run Crew, as well as creating and executing the proper cleaning schedule for all garments, ensuring that laundry is done on a regular basis between performances. Coordinates and creates backstage paperwork in conjunction with stage management, costume shop management, and the costume designer, including assigning Wardrobe Run Crew tasks throughout the run of a show, and quick-change plots. Must have knowledge of all Wardrobe Run Crew running tracks in the case of an absence. Regularly inventories and inspects all costumes and coordinates all costume repairs. Must be a qualified seamstress in the case of costume repair emergencies during a show. Coordinates strike at the end of a show run, including all in-house laundry or sending out dry-cleaning. Ensures that costumes look as fresh and new for the last performance as they did on opening night. Either adds elements to aid in quick-changes or coordinates such needs with the costume shop.

Job Description NDT/NDE Certified Welding Inspector Requisition Number: 2025-1350-04 Do you want to play a critical role in ensuring the structural integrity of steel components and welded systems that communities rely on every day? S&ME is seeking an individual passionate about ensuring the structural integrity of steel to join our NDT/NDE team in Charlotte, North Carolina, as a Certified Welding Inspector (CWI). What You Will Do: As a Certified Welding Inspector (CWI) with a focus on NDT/NDE, you will guide metals technicians through advanced testing assignments while supervising field staff, shaping technical decisions that impact project timelines, and independently carrying out laboratory and metals testing work. This role includes significant fieldwork, which may involve safely climbing steel structures, such as buildings, communication towers, and water tanks, to elevations exceeding 200 feet while using fall protection equipment and personal arrest systems. • Field Operations: You conduct inspections and apply non-destructive testing methods to ensure strict quality standards are met. A substantial part of your field time will be spent performing NDT procedures, including ultrasonic testing (UT) of welds and/or magnetic particle testing (MT) of welds., • Assignment Management: You organize and manage testing tasks across multiple projects, supporting the successful completion of each effort., • Equipment Maintenance: You maintain and calibrate testing equipment, which may include overseeing field and laboratory inventories, keeping formal calibration documentation, and taking part in quality assurance audits. What We Are Looking For: We are looking for someone with a strong work ethic and the ability to manage demanding workloads. You should bring a proactive, safety‑minded approach, communicate clearly with team members and clients, and stay organized while handling multiple priorities. Experience in Safety, DDC, NDT, or Radiation Training is highly valued and will help you succeed in this role. Qualifications: • Education: High School Diploma/GED, • Experience: Minimum of 2 years of NDT/NDE metals testing experience OR an associate degree in a closely related field, • Certifications:, • AWS Certified Welding Inspector (CWI), • Achievement of ASNT Level II per ASTN-SNT-1A in at least one method, • Additional Certs a plus:, • ICC in Building Inspections and/or Structural Steel Inspection, • Level II UT and/or PT, MT Working Conditions and Physical Demands: You are willing and able to perform the physical demands of this position with the use of Company-provided Personal Protective Equipment, such as: • Ability to climb heights over 200 feet, • Working the majority of the time outdoors in varying weather conditions, • Routinely lifting and carrying 40-50lbs (field/laboratory samples and equipment), • Working outside of normal business hours and traveling (typically out-of-town and/or overnight) as project needs arise We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of over 1,000 employee-owners across 10+ states collaborates to create a meaningful impact on our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. What We Offer: Comprehensive Health & Wellness Programs • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program offering $50 off per month on 2027 premiums, • 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution, • 401(k) Retirement Plan to help you plan ahead, • Paid Holidays, PTO with rollover options, and Paid Maternity & Paternity Leave, • Mentorship & Career Development Programs, Tuition Reimbursement, and Credential Incentive Program, • Employee Recognition Program, $2,000 Referral Bonuses, and a company vehicle & fuel card for project-based roles If you're passionate about making an impact and want to work with a firm committed to our employees and providing quality service to our clients, we'd love to hear from you! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. metals #technician #CWI #certified #NDT #NDE #non-destructiv Job Posted by ApplicantPro

Job Description • We are hiring immediately for a full time MAINTENANCE TECHNICIAN position., • Location: Fresh & Ready Food Group - 10015 John Price Road, Charlotte, North Carolina 28273. Note: online applications accepted only., • Schedule: Full time; Monday through Saturday, hours may vary. Sundays and one additional day of the week off. Open availability is preferred. More details upon interview., • Requirements: Prior food manufacturing maintenance experience is required., • Pay Range: $23.00 per hour to $28.00 per hour. *Internal Employee Referral Bonus Available We Make Applying Easy! Just text JOB to 75000 & search for the requisition ID number 1506475 . The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Job Summary Summary: Performs a variety of maintenance duties. Essential Duties and Responsibilities May Include: • Maintains, repairs, cleans and operates the plant, shops, mechanical areas, exterior grounds and campus facilities., • Performs basic maintenance duties and repairs as assigned; contacts supervisors, skilled trade vendors or on-call personnel as instructed., • Updates work statuses, timing, and costs of repairs using a variety of company tech systems., • Provides fleet maintenance support including but not limited to welding, plumbing, electrical, food truck kitchen maintenance, driving of vehicles, on campus fleet troubleshooting support, generator fixes, and general maintenance., • Assists in making decisions on all minor and routine repairs; reports major problems to the supervisor, foreman or journeyman., • Cleans sidewalks and parking areas; picks up and disposes of trash, debris, branches and similar items., • Operates electrical and gasoline-powered equipment., • Maintains equipment; performs minor equipment repairs using power and hand tools., • Performs a variety of other unskilled or semi-skilled tasks such as minor carpentry, plumbing, painting, minor electrical work, lamp changing and drywall maintenance., • Responds to emergency problems in the facility; performs emergency repairs as needed., • Maintains logs, performs rounds and completes maintenance work orders, tests and inspections., • Reads, comprehends and transmits complicated detailed instructions verbally and in writing., • Serves as a member of facility's emergency response team., • Performs other duties as assigned. Qualifications May Include: • One year of related experience as a maintenance worker/technician in a similar-sized institution or in a grounds maintenance occupation., • Valid driver's license. Working Conditions: Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Fresh and Ready Foods maintains a drug-free workplace.

Job Description We are seeking a skilled Industrial Maintenance Technician to support plant operations at its Charlotte, NC facility. This role is responsible for performing preventative, predictive, and reactive maintenance in a fast-paced production environment. The ideal candidate has hands-on industrial maintenance experience and a strong understanding of mechanical systems within a manufacturing or food production setting. Key Responsibilities • Perform preventative, predictive, and reactive maintenance throughout the facility, • Operate and maintain tools including power tools, hand tools, electric tools, and precision maintenance equipment Work across maintenance trades including: * Welding * Pipefitting * Fabrication * Gearbox and bearing maintenance * Lubrication systems * Pumps and piping systems * Hydraulic and pneumatic systems • Read and interpret mechanical schematics, blueprints, and operation manuals Modify or build equipment as required • Document maintenance activities using maintenance management software Operate forklifts, loaders, scissor lifts, and aerial lifts * Follow all safety regulations and maintain a clean work environment • Collaborate with peers and management to drive continuous improvementRequired Qualifications, • Eligible to work in the United States without visa sponsorship 18 years of age or older * High School Diploma or equivalent * 1+ year of industrial maintenance experience • Demonstrated experience in at least 1–2 maintenance trades (mechanical, electrical, welding, pipefitting, fabrication, hydraulics, pneumatics, etc.), • Ability to work in confined spaces and elevated areas (4 feet and above) Ability to lift up to 50 lbs and perform physical job duties * Basic computer skills • Ability to work overtime, weekends, holidays, or different shifts with advance notice Ability to read, write, and communicate in English Preferred Qualifications * Trade school certification or degree in a maintenance-related field * Military maintenance experience * Experience in food production environments • Experience with precision maintenance (laser alignment, dial indication), • Knowledge of safe work practices such as PJHA and confined space procedures

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Maintenance Technician The QP Maintenance Tech is responsible for but not limited to the following areas of working on and maintaining horizontal form fill and seal equipment, shrink wrap tunnels, forklift minor repairs, stretch wrapper, print registered bundle wrappers and heavy electrical work in the warehouse along with building maintenance. He/she must have great communication skills through phone, email and personal contact. Pay: $30.00-$32.00/hr Shift: 10:00pm-6:30am Responsibilities and Essential Duties • Perform routine preventative maintenance on mechanical handling equipment (forklifts, pallet jacks, sweepers, etc.), • Document records of maintenance, inspections, and repairs., • Select repair parts and update parts records., • Repair mechanical damage and replace defective parts, which may include welding, brazing, and soldering. Repairs are made to mechanical handling equipment, racking, floors, plumbing, piping, and other warehouse structural components., • Maintenance and repair of batteries and chargers., • Applies mechanical skills and knowledge to troubleshooting and repair of electrical, plumbing, pipe fitting, fabrication, building construction, and other warehouse maintenance/repair situations., • Reads and interprets schematics, drawings, and other diagnostic aids in the scope of troubleshooting, repair, and fabrication work., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Familiar with mechanical hand tools, and with measuring (tape measures, micrometers, drill gauges, etc.), • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. Candidate Requirements- Tangibles • Strong electrical troubleshooting skills, • Strong mechanical aptitude, • Understanding of high-voltage wiring (480V 3-phase motors), • Multi-craft maintenance and repair (e.g., performing interrelated repairs on electrical systems and mechanical systems, • Willingness to work under pressure to fix equipment, • Work urgently to get the equipment back up and running, • Troubleshooting issues on a wide variety of equipment, • Will conduct repair failures of production and facilities equipment, • Ensure maximum equipment efficiency, effectiveness, and reliability, • Responding to maintenance calls is part of your job, and this can sometimes mean helping complete a repair that has already been started, • Customer Service: given our emphasis on mechanical aptitude, you might be surprised to see customer service listed here, but remember we interact with all levels of team members on the floor. It is important that you, and we as a team, treat all team members with the same level of service as we would our consumers., • Flexibility: you'll be switching gears, shifting priorities, and balancing task lists with calls for maintenance repairs. Flexibility - and keeping your cool - will allow you to both focus and prioritize your work., • Self-Starter: you will often find yourself working unsupervised, so taking ownership of your quality and speed of work is essential when conducting preventative maintenance or addressing equipment failure., • Basic computer skills including use of Microsoft Office., • Experience with C.M.M.S. software (Preventive Maintenance/Work Order distribution systems)., • Understanding encoders and equipment timing., • Knowledge of Servo drives and motors., • Variable Frequency drive operation and configuration., • Some college is desirable

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Maintenance Technician The QP Maintenance Tech is responsible for but not limited to the following areas of working on and maintaining horizontal form fill and seal equipment, shrink wrap tunnels, forklift minor repairs, stretch wrapper, print registered bundle wrappers and heavy electrical work in the warehouse along with building maintenance. He/she must have great communication skills through phone, email and personal contact. Pay: $30.00-$32.00/hr Shift: 2:00pm-10:30 pm Responsibilities and Essential Duties • Perform routine preventative maintenance on mechanical handling equipment (forklifts, pallet jacks, sweepers, etc.), • Document records of maintenance, inspections, and repairs., • Select repair parts and update parts records., • Repair mechanical damage and replace defective parts, which may include welding, brazing, and soldering. Repairs are made to mechanical handling equipment, racking, floors, plumbing, piping, and other warehouse structural components., • Maintenance and repair of batteries and chargers., • Applies mechanical skills and knowledge to troubleshooting and repair of electrical, plumbing, pipe fitting, fabrication, building construction, and other warehouse maintenance/repair situations., • Reads and interprets schematics, drawings, and other diagnostic aids in the scope of troubleshooting, repair, and fabrication work., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Familiar with mechanical hand tools, and with measuring (tape measures, micrometers, drill gauges, etc.), • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. Candidate Requirements- Tangibles • Strong electrical troubleshooting skills, • Strong mechanical aptitude, • Understanding of high-voltage wiring (480V 3-phase motors), • Multi-craft maintenance and repair (e.g., performing interrelated repairs on electrical systems and mechanical systems, • Willingness to work under pressure to fix equipment, • Work urgently to get the equipment back up and running, • Troubleshooting issues on a wide variety of equipment, • Will conduct repair failures of production and facilities equipment, • Ensure maximum equipment efficiency, effectiveness, and reliability, • Responding to maintenance calls is part of your job, and this can sometimes mean helping complete a repair that has already been started, • Customer Service: given our emphasis on mechanical aptitude, you might be surprised to see customer service listed here, but remember we interact with all levels of team members on the floor. It is important that you, and we as a team, treat all team members with the same level of service as we would our consumers., • Flexibility: you'll be switching gears, shifting priorities, and balancing task lists with calls for maintenance repairs. Flexibility - and keeping your cool - will allow you to both focus and prioritize your work., • Self-Starter: you will often find yourself working unsupervised, so taking ownership of your quality and speed of work is essential when conducting preventative maintenance or addressing equipment failure., • Basic computer skills including use of Microsoft Office., • Experience with C.M.M.S. software (Preventive Maintenance/Work Order distribution systems)., • Understanding encoders and equipment timing., • Knowledge of Servo drives and motors., • Variable Frequency drive operation and configuration., • Some college is desirable

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Maintenance Technician - Level B The QP Maintenance Tech is responsible for but not limited to the following areas of working on and maintaining horizontal form fill and seal equipment, shrink wrap tunnels, forklift minor repairs, stretch wrapper, print registered bundle wrappers and heavy electrical work in the warehouse along with building maintenance. He/she must have great communication skills through phone, email and personal contact. Job Type: Full-time Pay: $34.00 - $38.00 per hour Responsibilities and Essential Duties • Perform routine preventative maintenance on mechanical handling equipment (forklifts, pallet jacks, sweepers, etc.), • Document records of maintenance, inspections, and repairs., • Select repair parts and update parts records., • Repair mechanical damage and replace defective parts, which may include welding, brazing, and soldering. Repairs are made to mechanical handling equipment, racking, floors, plumbing, piping, and other warehouse structural components., • Maintenance and repair of batteries and chargers., • Applies mechanical skills and knowledge to troubleshooting and repair of electrical, plumbing, pipe fitting, fabrication, building construction, and other warehouse maintenance/repair situations., • Reads and interprets schematics, drawings, and other diagnostic aids in the scope of troubleshooting, repair, and fabrication work., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Familiar with mechanical hand tools, and with measuring (tape measures, micrometers, drill gauges, etc.), • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. Candidate Requirements- Tangibles • Strong electrical troubleshooting skills, • Strong mechanical aptitude, • Understanding of high-voltage wiring (480V 3-phase motors), • Multi-craft maintenance and repair (e.g., performing interrelated repairs on electrical systems and mechanical systems, • Willingness to work under pressure to fix equipment, • Work urgently to get the equipment back up and running, • Troubleshooting issues on a wide variety of equipment, • Will conduct repair failures of production and facilities equipment, • Ensure maximum equipment efficiency, effectiveness, and reliability, • Responding to maintenance calls is part of your job, and this can sometimes mean helping complete a repair that has already been started, • Customer Service: given our emphasis on mechanical aptitude, you might be surprised to see customer service listed here, but remember we interact with all levels of team members on the floor. It is important that you, and we as a team, treat all team members with the same level of service as we would our consumers., • Flexibility: you'll be switching gears, shifting priorities, and balancing task lists with calls for maintenance repairs. Flexibility - and keeping your cool - will allow you to both focus and prioritize your work., • Self-Starter: you will often find yourself working unsupervised, so taking ownership of your quality and speed of work is essential when conducting preventative maintenance or addressing equipment failure., • Basic computer skills including use of Microsoft Office., • Experience with C.M.M.S. software (Preventive Maintenance/Work Order distribution systems)., • Understanding encoders and equipment timing., • Knowledge of Servo drives and motors., • Variable Frequency drive operation and configuration., • Basic knowledge of logic software., • Some college is desirable Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Brookshire, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at .

Job DescriptionJob Description About Circular Services: Circular Services is the largest privately held recycling and organics service provider in the U.S. It operates over 25 facilities serving major long-term municipal and commercial contracts. The mission of Circular Services is to keep valuable materials in circulation and minimize the cost and environmental impact of landfills. The company services municipal contracts with some of the largest and fastest growing cities in the U.S. including New York City, Austin, San Antonio, and Phoenix. About the Role: Position summary: The Facility Maintenance Technician is responsible for the inspection, repair, and preventative maintenance of machinery, equipment, and systems within the recycling facility. This role ensures maximum, uptime, efficiency, and safety of the plant operations by performing both routine and emergency maintenance on shredders, balers, conveyors, sortation systems, and support equipment. Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. • Perform scheduled preventive maintenance, minor repairs, and inspections on plant machinery and equipment to ensure optimal functionality., • Diagnose and promptly repair mechanical and hydraulic issues in balers, shredders, conveyors, forklifts, trailers, and other systems., • Assist senior technicians with rolling stock equipment maintenance and support installation and commissioning of new machinery., • Maintain a clean, organized, and safe work area in compliance with OSHA and corporate standards, including lockout/tagout procedures., • Collaborate with plant operators to identify recurring issues and recommend improvements. Support housekeeping, environmental compliance, and inventory management., • A flexible schedule is required, including weekends and up to 25% travel to support multiple facilities. Skills & Abilities: Education & Experience • High school diploma or GED required; technical or trade school certification preferred., • Minimum of 2 years of experience in industrial, mechanical, or electrical maintenance; recycling, manufacturing, or heavy equipment background preferred. Technical Proficiency • Working knowledge of hydraulics, pneumatics, welding, fabrication, and electrical systems., • Ability to read and interpret schematics, blueprints, and technical manuals., • Skilled in preventive maintenance, troubleshooting, and repair of plant machinery and rolling stock equipment., • Experience with installation, testing, and commissioning of new machinery., • Proficient in using hand tools, power tools, and diagnostic equipment. Safety & Compliance • Strong understanding of OSHA regulations and corporate safety standards., • Familiarity with lockout/tagout procedures and environmental compliance practices., • Commitment to maintaining a clean, safe, and organized work environment. Problem Solving & Collaboration • Strong troubleshooting and problem-solving skills, especially under pressure., • Ability to work independently and collaboratively with technicians, operators, and supervisors., • Capable of identifying recurring equipment issues and recommending improvements. Organizational Skills • Ability to maintain an organized maintenance shop with proper inventory of spare parts and tools., • Accurate documentation of maintenance activities and equipment performance. Physical & Scheduling Requirements • Must be able to lift up to 50 lbs and work in varying conditions (heat, dust, noise)., • Flexible work schedule, including weekends, to support facility operations., • Willingness to travel up to 25% to support multiple facilities as needed. Qualifications: • Must be at least 18 years of age, • Legally eligible to work in the United States., • Ability to perform physical requirements of the position with or without reasonable accommodations. Working Conditions & Physical Requirements: Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. • Required to use motor coordination with arms, hands, fingers, and legs., • Required to engage in physical activity that includes pushing, pulling, bending, and lifting objects more than 80 pounds., • Required to work from ladders or raised platforms., • Required to stand or work on concrete floors most of the workday., • Will be exposed to a physical environment, which involves dirt, odors, noise, weather extremes or similar elements most of the workday., • Monday - Friday 6AM - 4:30PM, Occasional Saturdays based on business needs. EEOC: Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics

Job Description As a result of our phenomenal growth, MSS Solutions, LLC has an opening for a Shop Superintendent – Pipe Shop. If you are an experienced Shop professional who is looking to grow your career and contribute fresh and innovative ideas to serve our customers, this is an opportunity you should explore! A career at MSS is not just a job -- it's collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives. The success of MSS is a direct reflection of our team's dedication, passion, and hard work. Since 1996, MSS has taken pride in retaining some of the best talents in the industry by promoting a culture of respect, collaboration, and empowerment. Role and Responsibilities • Supervises and coordinates the activities of pipe prefabrication shop personnel, ensuring optimization of duties and compliance with schedules., • Responsible for procurement of all materials to perform work and maintain schedule (welding rod, safety PPE, grinding disk, oxy, ace, etc), • Conduct and maintain a safe work environment by routinely inspecting equipment and work area, and ensuring all personal within shop area are complying with safe work practices, • Direct upkeep and appearance of prefab shop, • Work with Shop Leadership team to ensure prefab schedule is met; assist in troubleshooting deviations, • Trains and manages shop personnel to meet the execution objectives of prefabrication orders, • Communicates with Shop Leadership daily, providing updates on productivity and issues, • Assist Shop Leadership in implementing and upholding shop procedures and policies, • Conduct inventory of piping and materials for prefab production, • Attend all training classes and professional development as required by MSS, • Assist in recruiting, screening, and evaluation of shop employees Review and approve completed prefab work orders, • Submit employees’ (permanent and temporary) time to the office., • Minimum of 5 years of experience with piping planning and installation activities., • Must be able to work with variety of tools., • Have 1-5 years of experience managing projects and personnel., • Regular and supervisory probation period required, if applicable., • Random drug testing is required., • Valid driver's license and clean driving record required., • Must successfully pass a background check and drug test., • Physical Demands: Occasional sitting, frequent stooping, crouching, kneeling, balancing, and climbing. Constant standing, walking, reaching and gripping. Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to talk and hear. Occasional lifting up to 50 lbs. (maximum solo lift) and constant lifting to 25 lbs., placing this position in the very heavy physical demand classification (PDC). Benefit Highlights At MSS, we value our employees by providing a supportive culture with competitive compensation and a benefits package that continues to evolve based on our business's growth and our employees' needs. Currently, our benefits include: • Medical/Dental/Vision Insurance, • 401k with Employer Contributions, • PTO, • Paid Holidays, • Employee Assistance Program, • Long-term Disability, • Short-term Disability, • Flexible Spending Plan, • If you are unable to apply electronically and require an accommodation, please contact, • MSS Solutions, LLC is an equal opportunity employer and a drug-free environment.

The Turbine Design and Repair team you join supports factory repair of large fossil, nuclear and OOEM steam turbine equipment. You will coordinate all facets of the repairs for rotating or stationary equipment. You will Take charge of quoting future service opportunities and collaborate with our internal and external customers. You are encouraged to be assigned service projects, from simple to sophisticated, participate in equipment inspections, perform analysis, make recommendations, identify risks, issue manufacturing instructions, address quality issues, interact with shop colleagues and update records. In addition to service projects, this role also has exposure to shop R&D projects, design and installation of New Apparatus, Modernization and Replacement-in-Kind equipment, for both rotating and stationary components. As a service design engineer on this team, you will have broad responsibilities to ensure the integrity of the Siemens-Energy's steam turbine equipment. Your daily tasks will vary depending on the type of repair projects assigned. Engage in projects with a team from different areas to meet customer requirements and strengthen Siemens-Energy's position. • Lead for steam turbine service projects, covering rotating equipment, stationary components, blading, sealing, extension shafts for the Siemens Energy large steam turbine fleet and OOEM service opportunities., • Responsible in developing new repair designs or performing standard repair methods., • Responsible for execution of repair orders, including product definition, shop and field inspection requirements, repair, assembly, and installation., • Develop and release for manufacture all product definition documents including graphics, bill of materials, and process specifications., • Provide design disposition of field and shop inspections and deviations., • Provide shop follow support for turbine repair equipment manufactured in Charlotte or other manufacturing facilities., • Lead engineering studies for component life assessment, and other engineering analysis requests., • Support field service engineers and customers in required outage recovery programs and root cause investigations., • Support marketing/tendering on future steam turbine service opportunities., • Support or lead R&D activities within service engineering or the Charlotte manufacturing factory., • Bachelor’s Degree in Mechanical Engineering or equivalent from accredited university/college, • 2 or more years of related engineering work experience. Candidates with more years of experience can be considered for a higher level or vice versa., • Proficiency in strength of materials, structural analysis, and machine build. Ability to develop using finite element analysis tools is desired., • Project or team leadership experience with validated delivery of work in a technical environment. Ability to run multiple projects to finality., • Strong leadership, effective communication, and collaboration skills needed to engage with customer, field and factory staff, engineering teams, and management across various locations and/or countries., • Knowledge and experience in design and, or repair of products., • Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers, • Knowledgeable user of SAP and Teamcenter or other similar IT platforms, • Experience with finite element analysis using Ansys, Abaqus or NX desired, • Design experience with fluid mechanics, heat transfer, mechanical vibrations, creep & fatigue desired, • Familiarity with steam turbine products or repair methods for major equipment a plus, • Familiarity with welding repairs, processes a plus Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our distributed team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ___ • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits, • Parental leave

Job Description: ITW (Illinois Tool Works) is a Fortune 300 global manufacturer with approximately 44,000 employees across 51 countries. For over 100 years, we've delivered innovative, customer-focused solutions in industries ranging from automotive and aerospace to construction and electronics. Our success is driven by our differentiated business model comprised of our unique core capabilities: our 80/20 approach, customer-back innovation, and our decentralized, entrepreneurial culture. These capabilities are unmistakably ITW-and key to our longevity and strong performance. Our products and solutions are at work all over the world, and we are never, whether we know it or not, more than a few steps from an innovative ITW solution. ITW Commercial Construction North America (CCNA), a division of ITW, includes trusted brands like Buildex® (Teks®, Sammys®), Red Head (TruBolt®, Tapcon®), Ramset (Trakfast®), and PNA®, serving professional contractors since 1910. We design and manufacture innovative fastening, and concrete flatwork solutions for concrete, drywall, metal buildings, fire protection, plumbing, electrical, and HVAC applications. We're committed to operational excellence, responsive service, and continuous product innovation-always focused on meeting the evolving needs of the commercial construction industry. We are currently looking for a Welder on 1st shift to join our team! This individual will be based in Charlotte, NC and will be responsible for basic welding to produce per quality specifications in an efficient and safe manner. Core Responsibilities: \n • Performs ordinary and repetitive hand welding operations.\n, • Operates Welding equipment, regulates current and voltage for proper fusion of metals.\n, • Selects size and type of rod or wire appropriate for metal and welding application.\n, • Makes decisions consistent with priorities set forth by Production Manager or Plant Manager.\n, • Contributes to team effort by accomplishing results as needed for daily production goals.\n, • Follows all safety policies, rules, and best practices.\n, • Facilitates learning/training through a variety of delivery methods including hands-on, and one-on-one to welders of varying skill levels.\n, • Ability to communicate the process of welding plates in alignment with your current position title.\n, • Tests and troubleshoots production line units.\n, • Reviews present equipment, production procedures and makes recommendations that may improve productivity and reduce operation cost.\n, • Communicates all issues to Production Manager or Plant Manager to obtain additional resources, or resolutions.\n, • Prioritizes and maintains workflow and ensures use of proper tools and materials.\n, • Interacts with teammates to resolve problems that interfere with productivity and our culture of respect, trust, and integrity.\n, • Documents actions by completing quality assurance forms consistently and accurately.\n, • Accurately reports daily production.\n, • Additional responsibilities as assigned.\n\n Qualifications: \n • High School Diploma or GED\n, • Tack Welding experience preferred\n, • Experience in use of hand tools, including battery powered hand tools, and pneumatic tools\n, • Manufacturing experience highly preferred (setup, operate, and knowledge of preventative maintenance)\n, • Focus on quality control\n, • Clear ability to communicate & instruct on welding assembly\n, • Team player - able to collaborate with colleagues\n, • Must be able to lift up to 50 pounds\n\n We do not accept unsolicited resumes. To be considered an applicant, please apply online to a specific job posting. If you are a qualified individual with a disability and are unable or limited in your ability to use or access the online application system process due to your disability, please click here for information on how to contact us directly. Compensation Information: $19.50/ hour In addition to a competitive salary, employees are eligible for a competitive benefits package including but not limited to medical, dental, and vision insurance, disability and life insurance programs, 401(k) plan with a company match and additional employer contribution, flexible spending accounts, and paid time off. More details on our benefits can be found on our website at . ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

About the Company Founded in 1998, AVL has grown into a North American leader in turnkey engineering, manufacturing, and assembly solutions and we have just opened a new manufacturing facility in Charlotte, NC. For over 25 years, we've combined in-house mechanical, structural, and electrical engineering with custom acoustical design and airflow analysis to deliver fully integrated power-generation and energy-storage systems. At AVL, our team is the foundation of our success. Comprised of dedicated engineers, skilled fabricators, and experienced project managers, we bring a collaborative, hands-on approach to every project. From initial design to final assembly, we are committed to meticulous craftsmanship and continuous improvement to ensure our customers receive reliable, high-performance products they can trust. Our mantra of "We are one team" is lived by every employee, every day. About the Role The tool crib attendant supports plant operations by managing, issuing, tracking, and maintaining all tools, consumables, and production supplies used throughout the manufacturing facility. This role ensures operators, technicians, and maintenance personnel have the correct tools at the right time, supporting safe, efficient, and high-quality production. Responsibilities • Issue and receive tools, cutting tools, precision equipment, PPE, and consumables to production workers and maintenance staff., • Maintain accurate tool check-in/check-out records in the plant's inventory or CMMS system., • Track overdue tools and follow up with production supervisors when required., • Prepare tools packages for scheduled machine setups, changeovers, or preventive maintenance jobs., • Monitor inventory levels and reorder stock to prevent downtime., • Perform regular cycle counts and maintain accurate inventory data., • Organize and label shelves, bins, and storage areas using 5S/lean practices., • Inspect tools for damage or wear before reissuing., • Perform light maintenance (cleaning, lubrication, minor repairs)., • Send tools out for calibration or repair and track their status., • Remove unsafe or nonconforming tools from circulation., • Work closely with machine operators, assemblers, and maintenance technicians to identify tooling needs., • Assist with tool identification for CNC, fabrication, welding, or assembly operations., • Maintain SDS documentation for chemicals and coolants stored in the crib., • Support continuous improvement, cost-saving efforts, and scrap reduction related to tooling., • Ensure tools meet plant safety standards before issue and enforce PPE rules. Qualifications • High school diploma or GED., • Experience in a manufacturing, machining, or industrial environment., • Ability to recognize common hand tools, power tools, and industrial equipment., • Basic computer skills (inventory systems, work orders, email)., • Strong attention to detail and ability to multitask in a fast-paced environment., • Ability to lift 30-50 lbs and stand for extended periods., • 1-3 years experience. Equal Opportunity Statement We are an Equal Opportunity Employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All employment is decided based on qualifications, merit, and business needs.

Job Description • We are hiring immediately for full time SERVICE TECHNICIAN positions., • Location: Canteen - 3112 Horseshoe Lane, Charlotte, NC 28208. Note: online applications accepted only., • Schedule: Full time; Monday through Thursday, 5:00 am to 3:30 pm. More details upon interview., • Requirements: Prior mechanical experience is preferred. Willing to train!, • Pay Range: $22.00 per hour to $25.00 per hour. *Internal Employee Referral Bonus Available The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Repairs, maintains and assists in the installation of vending machines and equipment. Essential Duties and Responsibilities: • Responds to dispatch calls for machine repairs using company-owned vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Visually inspects and listens to machines to determine causes of malfunctions; dismantles machines to gain access to problem area., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reviews inventory and orders parts; ships and receives machines; maintains equipment inventory., • Prepares machines for installation at accounts; assists in installations and removals., • Sets up and operates mechanical equipment and small hand tools, such as drills, grinders and welding torches, for machine repair. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1494581 Canteen

A Snapshot of Your Day Welding and assembly technician will begin their normal working week Friday - Sunday 5:30pm - 6:00am. Once clocked in, they put on designated safety gear and proceed to their work area. After completing these tasks, the mechanic will look over their job assignments for the day, ensuring materials, tools and traceability requirements have all been reviewed and are available before starting work. The daily tasks may vary considerably from one day to another. They may include things like: Perform a wide variety of turbine assembly operations including set up, alignment, assembly, blading, seal removal and installation, fit, fabricate, weld and adjust turbine components. Operate material handling equipment (crane, fork truck, platforms, JLG, etc.) Load/unload components from machines and assist crane operations. Reading and interpreting blueprints. Operating a computer to retrieve, record and read product data and instructions. Calculating dimensions and tolerances with specialized precision measuring tools. Setting up, operating, and disassembling manual machines such as Bridgeport, Lathe, grinding machine etc. Measuring and testing finished products to verify their quality. Cleaning, deburring finished work products. Operating cranes to move product & perform critical lifts How You will Make an Impact Working in this industry impacts the world in which we live daily. Siemens Energy has a global team of more than 92,000 dedicated employees; we are responsible for meeting the growing energy demand while also protecting the climate. Together across 90 countries, we are committed to making sustainable, reliable, and affordable energy possible. This is how we shape the energy of tomorrow. What You Bring • Like working with your hands and paying great attention to detail and be an analytical person who is mechanically minded with strong math and communication skills., • Possess strong attention to detail with the ability to work autonomously and independently, excel in following directions, and have a grasp of computers., • Must pass Welding test if not currently certified (6G welding to PQ-50202-38, PQ-50210-38 and PQ-50101-39) within progression period., • Knowledge of shop mathematics, read/interpret drawings, specifications, charts and tables., • Capable of using various measuring instruments (calipers, gauges, micrometers)., • Equivalent of 1-3 years of mechanical trade experience. Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

A Snapshot of Your Day Alignment Mechanics begin their days normally working 40-hour week Monday - Thursday nights. Once clocked in, they put on designated safety gear. After completing these tasks, the machinist will look over their job assignments for the day, ensuring materials, tools and traceability requirements have all been reviewed and are available before starting work. How You Will Make an Impact The daily tasks may vary considerably from one day to another. They may include things like: \n • Perform a wide variety of turbine assembly operations including set up, alignment, assembly, blading, seal removal and installation, fit, fabricate, weld and adjust turbine components.\n, • Operate material handling equipment (crane, fork truck, platforms, JLG, etc.)\n, • Load/unload components from machines and assist crane operations. Reading and interpreting blueprints. Operating a computer to retrieve, record and read product data and instructions\n, • Calculating dimensions and tolerances with specialized precision measuring tools. Setting up, operating, and disassembling manual machines such as Bridgeport, Lathe, grinding machine etc.\n, • Measuring and testing finished products to verify their quality\n, • Like working with your hands and paying great attention to detail.\n, • Analytical person who is mechanically minded with strong math and communication skills. Possess strong attention to detail.\n, • Capability to work independently, excel in self-management, and possess computer proficiency.\n, • Must pass Welding test if not currently certified (6G welding to PQ-50202-38, PQ-50210-38 and PQ-50101-39) within progression period.\n, • Knowledge of shop mathematics, read/interpret drawings, specifications, charts and tables.\n Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards\n • Career growth and development opportunities; supportive work culture\n, • Company paid Health and wellness benefits\n, • Paid Time Off and paid holidays\n, • 401K savings plan with company match\n, • Family building benefits\n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

This role will be based at our new Siemens Energy Transformers Manufacturing Center Factory in Charlotte, North Carolina, USA. The facility is planned to be built by early 2026 for production commencement. A Snapshot of Your Day As we continue to grow and push the boundaries of what's possible, we are seeking a Winding Assembler with a passion for excellence and innovation in medium to large power transformer manufacturing. Join us in shaping the future of energy, making it smarter, faster, and more efficient than ever before. As a Winding Assembler, you will be responsible for performing final finishing of transformer windings, carrying out the assembly of the winding blocks and the documentation and quality checks of the process. This position is designed for someone who brings a blend of technical expertise, and a commitment to safety and quality compliance. As you progress in your job role, you would be able to support us in growing the department by assisting in the training and development of new hires in the organization. How You'll Make an Impact • Performs finishing and assembly of transformer winding blocks, operates overhead cranes and forklifts, and conducts welding when needed., • Reads technical drawings, validates winding alignment within tolerances, and performs measurements and inspections to meet technical standards., • Prepares winding blocks for drying and pressing and supports the development and maintenance of technical documentation for winding assembly procedures., • Training and mentoring new hires into the department., • Planning and reviewing the tasks to be carried out according to pre-establishe d production plan and manufacturing standards., • Responsible to fulfill and/or to support to fulfill all protocols, policies, guidelines, and competences coming from all current system [EHS, QA, CyberSec, etc.]. What You Bring • High school degree or equivalent with relevant technical training/exper ience., • At least 1 year of experience in the winding block assembly process for medium to large transformers., • Ability to use math, read and interpret complex drawings, and perform complex measurements., • Applicant must be able to obtain Keys certification test on reading and writing and Blueprint reading test offered by local community college., • Applicant must be able to obtain and maintain Forklift License and a Critical Lift level crane license and certification for working in heights. Other Key Requirements: • Successful applicants must be able to pass standard hearing, vision, and pulmonary function tests., • Must also be able to read, write, understand, and follow verbal and/or written instructions in English., • Must be willing to relocate temporarily to Mexico, Brazil or Germany for on-the-job training for a period of 3 months based on the proficiency in the area of training. Appropriate relocation support and compensation will be provided. About the Team Our Grid Technology division enables a reliable, sustainable, and digital grid. The power grid is the backbone of the energy transition. Siemens Energy offers a leading portfolio and solutions in HVDC transmission, grid stabilization and storage, high voltage switchgears and transformers, and digital grid technology Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonizatio n, new technologies, and energy t ransformation. Find out how you can make a difference at Siemens Energy: [1] [1] emens-energy.c om/employeevid eo Rewards • Competitive pay with relocation package to Charlotte, NC, • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

A Snapshot of Your Day Alignment Mechanics begin their normal working week Friday - Sunday 5:30pm - 6:00am. Once clocked in, they put on designated safety gear and proceed to their work area. After completing these tasks, the mechanic will look over their job assignments for the day, ensuring materials, tools and traceability requirements have all been reviewed and are available before starting work. How You'll Make an Impact\n • Perform a wide variety of turbine assembly operations including set up, alignment, assembly, blading, seal removal and installation, fit, fabricate, weld and adjust turbine components. Operate material handling equipment (crane, fork truck, platforms, JLG, etc.)\n, • Load/unload components from machines and assist crane operations, reading and interpreting blueprints\n, • Operating a computer to retrieve, record and read product data and instructions\n, • Calculating dimensions and tolerances with specialized precision measuring tools\n, • Setting up, operating, and disassembling manual machines such as Bridgeport, Lathe, grinding machine etc.\n, • Measuring and testing finished products to verify their quality. Cleaning, deburring finished work products. Operating cranes to move product & perform critical lifts\n\nWhat You Bring\n, • Analytical person who is mechanically minded with strong math and communication skills.\n, • Possess strong attention to detail.\n, • Ability to work autonomously and independently, excel in following directions, and have a grasp of computers. Must pass Welding test if not currently certified (6G welding to PQ-50202-38, PQ-50210-38 and PQ-50101-39) within progression period.\n, • Knowledge of shop mathematics, read/interpret drawings, specifications, charts and tables.\n, • Capable of using various measuring instruments (calipers, gauges, micrometers).\n Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards\n • Career growth and development opportunities; supportive work culture\n, • Company paid Health and wellness benefits\n, • Paid Time Off and paid holidays\n, • 401K savings plan with company match\n, • Family building benefits\n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .