Welding jobs in Waco, TexasCrear alertas

Job DescriptionJob Title: Quality Control InspectorJob Status: Full-timeLocation: Waco, TX 76710 Company: Crouch Staffing Solutions, Inc. Crouch Staffing is seeking an experienced Quality Control Inspector to join our team! In this role, you will ensure the integrity of steel fabrication processes and final products by adhering to the Quality Management System (QMS). You will be responsible for conducting inspections, maintaining document control, and verifying product quality. This position reports directly to the Quality Control Manager. • Pay Range: $41,600-$52,000/year (eligible for overtime pay)Qualifications:, • Education: A technical degree in welding, steel materials, or a related field is preferred., • Experience: Minimum of two years of experience in quality control inspection, ideally in structural steel fabrication. Experience with AISC, AWS, or CWB certifications is a plus., • Technical Skills: Ability to read and interpret technical drawings, and familiarity with quality control processes., • Certifications: AWS or ISO certifications are desirable. NDT certification (Level 1, 2, or 3) must be obtained within six months of hire., • Competencies: Attention to detail, good communication skills, and the ability to work well in a team environment.Key ResponsibilitiesQuality Control:, • Perform visual inspections of in-process and finished structural steel components, such as beams, columns, plates, and clips, ensuring they meet quality standards and project specifications., • Evaluate welds for compliance with QMS standards and identify any non-conformities for rework or further testing., • Use non-destructive testing (NDT) methods, such as liquid penetration testing, when necessary to detect defects., • Document inspection results, including corrections, and maintain logs for final QC reports and Quality Dossiers., • Ensure that parts and assemblies are properly marked with legible identification at each stage of production.Dimensional Accuracy:, • Use micrometers and tape measures to ensure that fabricated parts and assemblies conform to design specifications., • Mark non-conforming items and communicate necessary repairs., • Oversee dimensional control processes that align with the production workflow.Traceability:, • Verify that received materials meet procurement standards and that mill certifications with heat numbers are appropriately assigned., • Ensure parts and assemblies are correctly identified throughout production., • Manage and discard materials that do not comply with the QMS.Document Control:, • Scan and upload documents into facility software systems., • Use mobile wireless devices to track parts and products according to QMS protocols., • Maintain updated drawings and distribute revisions to production stations, removing outdated versions., • Record and communicate inspection data, including findings and photos, to management.Ongoing Maintenance:, • Verify that tools and equipment used in production are calibrated and in good working condition., • Work with team members to identify quality improvement opportunities., • Participate in meetings to discuss QC processes and contribute to continuous improvement efforts.Safety Compliance:, • Follow all safety protocols and ensure a safe working environment., • Use personal protective equipment (PPE) as required.

Job DescriptionMasterTech is on the search for experienced Diesel Mechanics in the Waco TX area. Mechanics will be responsible for the maintenance, diagnostics, and repair of a diverse line of heavy equipment in a shop and field service environment. Compensation: • $28.00 - $45.00/hour+ based on experience, training, certifications, etc., • Comprehensive benefits plan. Company pays 100% of employee premiums. Benefits include medical, dental, vision, life insurance, paid time off, etc., • 401K with matching contributions., • Boot and tool allowance., • 3 or more years of experience as a Diesel Mechanic, or completion of a Diesel Technology/Mechanic program., • Good understanding of mechanical, electrical, and hydraulic systems., • Able to read and interpret blueprints and schematics., • Proficient with diagnostic scanning tools., • Welding experience is preferred., • Working knowledge on construction, earth moving, forestry, mining, landscaping, etc., equipment is preferred.

Job Description Job Title: Millwright Location: Waco, Texas, United States Job Type: Full-Time Pay: $25-$32 per hour Qualifications • Completion of a recognized millwright apprenticeship program or equivalent experience, • Journeyman Certification As a Millwright, • Proficiency in reading blueprints, schematics, and technical manuals, • Strong mechanical aptitude and troubleshooting skills, • Experience with hand and power tools, welding equipment, and machining tools, • Knowledge of safety regulations and procedures related to industrial machinery, • Ability to work independently or as part of a team, • Excellent communication and interpersonal skills, • Physical stamina and dexterity to perform tasks requiring lifting, bending, and climbing, • Willingness to work flexible hours and overtime as needed, including weekends and holidays, • A Pre-Employment Drug Screening is required, we are in Iowa, • Additional certifications in welding, machining, or industrial maintenance, • Experience with specific types of machinery or equipment relevant to the industry

Job DescriptionBenefits: • Competitive salary Why work for FASTSIGNS Waco? We love being creative and working on cool projects to support the visual communications needs of our customers. We have fun working as a team to produce high-quality products using advanced equipment and techniques. If you like to work hard and have fun, wed love to have you on the team! Benefits/Perks • Competitive Pay, • Paid Vacation and Holidays, • Ongoing Training Opportunities, • Pay range $18.00 - $22.00/hour based on experienceEssential Functions, • Metal fabrication of aluminum and steel., • Set up and operate fabricating and metal forming machines., • Perform quality, accurate, and timely work with minimal oversight after the training period., • Weld aluminum structures, ensuring the integrity and appearance of the finished product., • Read and interpret blueprints thoroughly., • Operate and use hand tools and power tools to secure parts in place., • Inspect finished products for quality and accuracy before delivery., • Lift, carry, and move materials as needed., • Follow safety guidelines and procedures at all times., • Maintain the organization and cleanliness of your shop area., • Collaborate with design and installation teams to ensure project feasibility and completion. Qualifications • Proven experience as a Sign Fabricator or similar role in the signage or related industry., • Knowledge of welding aluminum and experience operating fabrication equipment., • Proficiency with hand tools and machinery, such as saws, drills, and welding equipment., • Ability to read and interpret technical drawings and work orders., • Strong attention to detail and commitment to producing high-quality work., • Excellent problem-solving skills and ability to work independently or as part of a team., • Effective communication skills and a positive attitude., • Ability to read and speak English., • High school diploma or equivalent; technical training in fabrication and welding certification preferred., • Knowledge of safety guidelines and procedures., • Others as deemed required by the company to ensure safety in your role. Typical Physical Demands • Ability to stand for long periods of time., • Ability to lift 75 or more pounds., • Ability to work under pressure to output high volume, high-quality work., • Ability to use light power equipment., • Frequent bending, stooping, squatting, pushing, and pulling of parts and part containers.

Job Description Job Summary: This position is responsible for performing basic manufacturing weld fabrications of various products or components. The MFG Welder 1’s primary purpose is to learn, develop, and gain experience as a Welder and receive on-the-job training (OJT) including: understanding drawings and blueprints, and adhere to standard procedures in the use of equipment when setting up parts, tack welding, stitch welding, and seal welding. The hours for this position are Monday - Thursday 4pm - 2:30am. Entry-level position – Generally has less than two years of experience and/or demonstrated job relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform the functions of the job; works under immediate supervision. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Adheres to guidelines and procedures in setting up, tack/stitch weld subassemblies, and full product utilizing various tools and fixtures, • Learns and performs how to interpret blueprints, drawings, and all welding processes through weld symbols and call outs, • Learns and performs how to complete work orders, fabrication, and welding on product and their components, • Learns and performs basic oxy/acetylene torch cutting and welding of multiple different welding processes, • Performs in accordance to Standard Operating Procedures (SOP) with job tasks and maintains consistency between work shifts and work areas, • Transports material in area or between areas utilizing overhead crane, jibs, carts, magnets and other devices, • Works as a member of the manufacturing team to provide high quality products that satisfy the customer (internal and external) and achieves departmental goals, • Maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean, and orderly condition Operator Performed Maintenance (OPM and 5S), • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • Adheres to contamination control and HAZMAT rules and regulations, • Communicates with team on established standard work variances on production line processes, • Preforms quality inspections, complete reports, documents, and/or any other necessary paperwork, and enforces required rework prior to customer, • Works overtime as required by workload and customers’ needs, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Basic knowledge of weld equipment and dimensional tools, including their uses and maintenance, • Basic knowledge of specification and drawing interpretations; e.g. drawings, blueprints and computers and the use of equipment needed to fabricate and perform in the task at hand, • Basic knowledge with current computer software, related hardware, and machine electronic systems, • Developing good work habits, accuracy and exceptional attention to detail and quality of work and awareness, • Ability to develop technical skills to become a skilled qualified welder and fabricator to effectively perform assigned welding tasks, • Ability to read, write, and understand information, • Adaptable to changing schedules and exhibits time management skills, • Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication, • Ability to develop thinking and problem-solving skills to learn and understand Root Cause Corrective Action (RCCA) process, • Required to work as part of a team with a strong work ethic being dependable, reliable and honest with demonstrated integrity, • Required to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding, • Required to be a self-starter and self-motivated with an exceptional safety record o Winning Together with DiSC Education and Experience: • High school diploma or equivalent preferred, • Two years of work-related skill, knowledge, or experience preferred, • Basic Welding Certifications in the GMAW welding process in the 1-3 G/F positions preferred Supervisory Responsibilities: None Travel: • Valid Driver’s license required Physical Requirements: • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath blocked and cribbed product, • Frequently lifts and moves materials and equipment weighing up to 50 lbs. Work Environment: • Requires wearing proper protective and safety equipment (PPE), • Regularly works indoors around moving equipment and exposed to flashes of light from welding, and loud noise levels; may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water and high-speed rotating equipment, • Possible exposure to minor burns and cuts – must be reported for proper treatment Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-MFG

Polyglass USA, Inc., a premier roofing materials manufacturer, has an opening for an Industrial Maintenance Technician for our Waco, TX facility. Pay: $29.00-$36.00 per hour and a $1000 90-Day Probationary Completion Bonus. Hours: 6 PM-6 AM This position will report into the Maintenance Supervisor and serve as an interface between Production, with additional reporting to the Maintenance Manager and Plant Manager. What You Get To Do: • Troubleshoot and repair various manufacturing equipment, including those with motors and motor controls., • Utilize hands-on knowledge and experience of industrial computerized controls, variable speed drives, level sensors, limit switches, pressure switches, proximity sensors, photo-electric sensors, and IEC-style contractors and starters., • Metal fabrication and/or welding skill is preferred., • Perform weekly lubrication of plant processes and ancillary equipment., • Disassemble and reassemble the asphalt pump and replace packing in pumps and valves., • Replace and align motors, gearboxes, belts, chains, sprockets, and pulleys., • High school diploma or GED preferred., • A minimum of 1 year of previous experience in a related capacity and/or vocational school or other training program is preferred., • Previous experience in a manufacturing environment preferred. Join the Polyglass family today. ___

Job Description Job Summary: This position is responsible for performing moderate manufacturing weld fabrications of various products and components. The MFG Welder 2 demonstrates proficiency as a welder in the following established procedures and guidelines; understanding drawings and blueprints, adhere to the standard procedures in the use of equipment when setting up parts, tack welding, stitch welding, and seal welding. Able to work independently or as a member of a team to provide welding services that satisfy customer needs and achieve departmental goals. Mid-level position – Generally has two to four years of experience and/or demonstrated job relevant knowledge/skills and obtained or currently obtaining welding certifications in the GMAW and FCAW welding process in the 1-3 G/F positions. The MFG Welder 2 has moderate knowledge of standard and technical concepts, practices, and procedures in multiple manufacturing areas; is indirectly supervised and self-starting. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Adheres to guidelines and procedures in setting up, tack/stitch weld subassemblies, and full product utilizing various tools and fixtures, • Assist in development new fabrication weldment procedures, utilizing drawings, blueprints, and welding symbols while referencing current standard work, • Performs moderate skills to interpret blueprints, drawings, and all welding processes through weld symbols and call outs, • Performs moderate skills to complete work orders, fabrication, and welding on product and their components, • Ensures all weldments are in compliance with specific welding codes, procedures, and quality standards, • Performs moderate oxy/acetylene torch and plasma cutting, and welding of multiple different welding processes, • Desires to challenge self with an abundance mindset to achieve highest levels of performance and quality, • Performs and completes tasks with some supervision, • Updates job knowledge by participating in educational opportunities; (e.g., ProTech Welder Training Paths), • Performs in accordance to Standard Operating Procedures (SOP) with job tasks and maintains consistency between work shifts and work areas, • Transports material in area or between areas utilizing overhead crane, jibs, carts, magnets and other devices, • Works as a member of the manufacturing team to provide high quality products that satisfy the customer (internal and external) and achieves manufacturing goals, • Maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean, and orderly condition (Operator Performed Maintenance (OPM and 5S), • Adheres to contamination control and HAZMAT rules and regulations, • Communicate variances to established processes for an area or product, • Works overtime as required by workload and customers’ needs, • Support training and development of new and existing team members, • Works safely at all time and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Demonstrated knowledge of weld equipment and dimensional tools, including their uses, and maintenance, • Demonstrated knowledge of specification and drawing interpretations; e.g. drawings, blueprints and computers and the use of equipment needed to fabricate and perform in the task at hand, • Demonstrated knowledge with current computer software, related hardware, • Established good work habits, accuracy and exceptional attention to detail and quality of work and awareness, • Demonstrated technical skills as a skilled qualified welder and fabricator to effectively perform assigned welding tasks, • Ability to read, write, and understand information, • Adaptable to changing schedules and exhibits time management skills, • Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication, • Ability to develop thinking and problem-solving skills to learn and understand Root Cause Corrective Action (RCCA) process, • Ability to work independently and as part of a team with a strong work ethic being dependable, reliable and honest with demonstrated integrity, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding, • A self-starter and self-motivated with an exceptional safety record o SL II for Supervisors Education and Experience: • High school diploma or equivalent preferred, • A minimum of two years’ of work-related skill, knowledge, or experience required; four or more years preferred, • Basic Welding Certifications in the GMAW, FCAW, and SMAW welding process in the 1-3 G/F positions preferred Supervisory Responsibilities: None Travel: • Valid Driver’s license required Physical Requirements: • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • May be required to work in confined workspaces, awkward positions and high places, • Frequently lifts and moves materials and equipment weighing up to 50 lbs. Work Environment: • Requires wearing proper protective and safety equipment (PPE), • Regularly works indoors around moving equipment and exposed to flashes of light from welding, and loud noise levels; may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water and high-speed rotating equipment, • Required to perform work in cramped spaces and/or on elevated surfaces, • Possible exposure to minor burns and cuts – must be reported for proper treatment Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-MFG

Job Description Job Summary: The Manufacturing Associate is responsible for loading component parts into and operating Plasma/Oxy Cut, Shear, Press, and Roll Equipment. In addition, the Manufacturing Associate will perform basic painting and light assembly. Generally has two or more years of experience and/or demonstrated job-relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform functions of the job and has a basic knowledge of standard and technical concepts, practices, and procedures. The Manufacturing Associate performs a variety of standard, complex, and technical tasks including basic painting and light assembly; works under immediate supervision; a team member of product production and flow Team. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models and promotes alignment with HOLT’s Vision, Values, and Mission, • Works as a member of the manufacturing team to provide high-quality products that satisfy the customer (internal and external) and achieve manufacturing goals, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs in accordance with guidelines and procedures with the proper setup and provide maintenance services that satisfy customer requirements and achieves manufacturing goals Performs basic quality checks, checking and replacement of process consumables, and the safe loading and removal of parts from process equipment, de-slagging/cleaning of parts, and orienting/preparing parts for the next process station * Performs basic setup and utilize plasma and Oxy CNC cut machines to produce “Burn to Shape” / cut parts, loading component parts to Plasma, Oxy Cut, Shear, Press and Roll equipment * Assists with preparing components or products for paint including any preassembly, washing, masking, and staging * Learns and performs light assembly of components * Transports of materials can involve overhead cranes, jibs, forklifts, carts, magnets, and other devices · Performs basic conformance verification (inspection) of completed work to specification prior to movement to next station * Performs basic processes as outlined in Standard Work developing consistency between shifts and areas * Communicates and reports all quality defects defined by engineering specifications or manufacturing engineering in-process specifications * Performs basic performance of equipment through regular operator checks and processes (Operator Performed Maintenance - OPM) * Learns performs and maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean and orderly condition (Sort, Set, Shine, Standardize, and Sustain) * Participates in Rapid Improvement Workshops (RIWs) and Kaizen events to continuously improve processes, safety, and quality * Adheres to contamination control and HAZMAT rules and regulations * Assists with quality inspections, complete reports/documents and any other necessary paperwork and enforces required rework after the customer * Works overtime as required by workload and customers’ needs * Requires regular and punctual employee attendance * Performs other duties as assigned Required Knowledge, Skills, and Abilities: • Ability to read, write and understand work instructions, policies, and procedures, • Ability to effectively present information in one-on-one and small group situations, • Knowledge of equipment and dimensional tools, including their uses, and maintenance, • Knowledge of current computer software, related hardware, and machine electronic systems, • Basic knowledge in the application of paints and other finishes by brush or spray gun and light assembly, • Ability to adapt to changing schedules and exhibits time management skills, • Ability to develop thinking and problem-solving skills to learn and understand the Root Cause Corrective Action (RCCA) process, • Ability to work independently and as part of a team, • High school diploma or equivalent required, • A minimum of two years related experience and/or training or equivalent experience preferred, • A significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently lifts and moves materials and equipment weighing up to 35 lbs. Work Environment:, • Requires wearing proper protective and safety equipment (PPE), • Regularly works around moving equipment and exposed to flashes of light from welding, and loud noise levels, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Job Summary: The Manufacturing Associate is responsible for loading component parts into and operating Plasma/Oxy Cut, Shear, Press, and Roll Equipment. In addition, the Manufacturing Associate will perform basic painting and light assembly. Generally has two or more years of experience and/or demonstrated job-relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform functions of the job and has a basic knowledge of standard and technical concepts, practices, and procedures. The Manufacturing Associate performs a variety of standard, complex, and technical tasks including basic painting and light assembly; works under immediate supervision; a team member of product production and flow Team. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models and promotes alignment with HOLT’s Vision, Values, and Mission, • Works as a member of the manufacturing team to provide high-quality products that satisfy the customer (internal and external) and achieve manufacturing goals, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs in accordance with guidelines and procedures with the proper setup and provide maintenance services that satisfy customer requirements and achieves manufacturing goals Performs basic quality checks, checking and replacement of process consumables, and the safe loading and removal of parts from process equipment, de-slagging/cleaning of parts, and orienting/preparing parts for the next process station * Performs basic setup and utilize plasma and Oxy CNC cut machines to produce “Burn to Shape” / cut parts, loading component parts to Plasma, Oxy Cut, Shear, Press and Roll equipment * Assists with preparing components or products for paint including any preassembly, washing, masking, and staging * Learns and performs light assembly of components * Transports of materials can involve overhead cranes, jibs, forklifts, carts, magnets, and other devices · Performs basic conformance verification (inspection) of completed work to specification prior to movement to next station * Performs basic processes as outlined in Standard Work developing consistency between shifts and areas * Communicates and reports all quality defects defined by engineering specifications or manufacturing engineering in-process specifications * Performs basic performance of equipment through regular operator checks and processes (Operator Performed Maintenance - OPM) * Learns performs and maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean and orderly condition (Sort, Set, Shine, Standardize, and Sustain) * Participates in Rapid Improvement Workshops (RIWs) and Kaizen events to continuously improve processes, safety, and quality * Adheres to contamination control and HAZMAT rules and regulations * Assists with quality inspections, complete reports/documents and any other necessary paperwork and enforces required rework after the customer * Works overtime as required by workload and customers’ needs * Requires regular and punctual employee attendance * Performs other duties as assigned Required Knowledge, Skills, and Abilities: • Ability to read, write and understand work instructions, policies, and procedures, • Ability to effectively present information in one-on-one and small group situations, • Knowledge of equipment and dimensional tools, including their uses, and maintenance, • Knowledge of current computer software, related hardware, and machine electronic systems, • Basic knowledge in the application of paints and other finishes by brush or spray gun and light assembly, • Ability to adapt to changing schedules and exhibits time management skills, • Ability to develop thinking and problem-solving skills to learn and understand the Root Cause Corrective Action (RCCA) process, • Ability to work independently and as part of a team, • High school diploma or equivalent required, • A minimum of two years related experience and/or training or equivalent experience preferred, • A significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently lifts and moves materials and equipment weighing up to 35 lbs. Work Environment:, • Requires wearing proper protective and safety equipment (PPE), • Regularly works around moving equipment and exposed to flashes of light from welding, and loud noise levels, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Job Summary: The Manufacturing Associate is responsible for loading component parts into and operating Plasma/Oxy Cut, Shear, Press, and Roll Equipment. In addition, the Manufacturing Associate will perform basic painting and light assembly. Generally has two or more years of experience and/or demonstrated job-relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform functions of the job and has a basic knowledge of standard and technical concepts, practices, and procedures. The Manufacturing Associate performs a variety of standard, complex, and technical tasks including basic painting and light assembly; works under immediate supervision; a team member of product production and flow Team. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models and promotes alignment with HOLT’s Vision, Values, and Mission, • Works as a member of the manufacturing team to provide high-quality products that satisfy the customer (internal and external) and achieve manufacturing goals, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs in accordance with guidelines and procedures with the proper setup and provide maintenance services that satisfy customer requirements and achieves manufacturing goals Performs basic quality checks, checking and replacement of process consumables, and the safe loading and removal of parts from process equipment, de-slagging/cleaning of parts, and orienting/preparing parts for the next process station * Performs basic setup and utilize plasma and Oxy CNC cut machines to produce “Burn to Shape” / cut parts, loading component parts to Plasma, Oxy Cut, Shear, Press and Roll equipment * Assists with preparing components or products for paint including any preassembly, washing, masking, and staging * Learns and performs light assembly of components * Transports of materials can involve overhead cranes, jibs, forklifts, carts, magnets, and other devices · Performs basic conformance verification (inspection) of completed work to specification prior to movement to next station * Performs basic processes as outlined in Standard Work developing consistency between shifts and areas * Communicates and reports all quality defects defined by engineering specifications or manufacturing engineering in-process specifications * Performs basic performance of equipment through regular operator checks and processes (Operator Performed Maintenance - OPM) * Learns performs and maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean and orderly condition (Sort, Set, Shine, Standardize, and Sustain) * Participates in Rapid Improvement Workshops (RIWs) and Kaizen events to continuously improve processes, safety, and quality * Adheres to contamination control and HAZMAT rules and regulations * Assists with quality inspections, complete reports/documents and any other necessary paperwork and enforces required rework after the customer * Works overtime as required by workload and customers’ needs * Requires regular and punctual employee attendance * Performs other duties as assigned Required Knowledge, Skills, and Abilities: • Ability to read, write and understand work instructions, policies, and procedures, • Ability to effectively present information in one-on-one and small group situations, • Knowledge of equipment and dimensional tools, including their uses, and maintenance, • Knowledge of current computer software, related hardware, and machine electronic systems, • Basic knowledge in the application of paints and other finishes by brush or spray gun and light assembly, • Ability to adapt to changing schedules and exhibits time management skills, • Ability to develop thinking and problem-solving skills to learn and understand the Root Cause Corrective Action (RCCA) process, • Ability to work independently and as part of a team, • High school diploma or equivalent required, • A minimum of two years related experience and/or training or equivalent experience preferred, • A significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently lifts and moves materials and equipment weighing up to 35 lbs. Work Environment:, • Requires wearing proper protective and safety equipment (PPE), • Regularly works around moving equipment and exposed to flashes of light from welding, and loud noise levels, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Job Summary: The Logistics Expeditor is responsible for loading component parts into and operating Plasma/Oxy Cut, Shear, Press and Roll equipment. In addition, the Logistics Expeditor will perform basic painting and light assembly. Entry-Intermediate level position – Generally has a minimum of one year of experience and/or demonstrated job relevant knowledge/skills. The LE relies on instructions and pre-established guidelines to perform functions of the job and has basic knowledge of standard and technical concepts, practices, and procedures. The LE performs a variety of standard, basic, and technical tasks to include basic painting and light assembly; works under immediate supervision; a team member of product production and flow. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. What can HOLT Manufacturing offer you? • A competitive salary, commensurate with your experience and competencies., • A comprehensive and robust benefits program that includes complete health care, 401(k) matching & Profit-Sharing plan (ROTH and traditional), paid holidays, and a front-loaded PTO program., • A Tuition Reimbursement program to support the pursuit of accredited college courses., • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Works as a member of the manufacturing team to provide high quality products that satisfies the customer (internal and external) and achieves manufacturing goals, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs in accordance to guidelines and procedures with proper setup and provide maintenance services that satisfies customer requirements and achieves manufacturing goals, • Learns and performs quality checks, checking and replacement of process consumables, and the safe loading and removal of parts from process equipment, de-slagging/cleaning of parts, and orienting/preparing parts for the next process station, • Learns and performs setup and utilize plasma and oxy CNC cut machines to produce “Burn to Shape” / cut parts, loading component parts to Plasma, Oxy Cut, Shear, Press and Roll equipment, • Assists with preparing components or product for paint including any pre-assembly, washing, masking and staging, • Learns and performs light assembly of components, • Transports of materials can involve overhead cranes, jibs, forklifts, carts, magnets, and other devices, • Learns and performs conformance verification (inspection) of completed work to specification prior to movement to next station, • Learns and performs processes as outlined in Standard Work developing consistency between shifts and areas, • Communicates and reports all quality defects defined by engineering specifications or manufacturing engineering in-process specifications, • Learns and performs basic performance of equipment through regular operator checks and processes (Operator Performed Maintenance - OPM), • Learns, performs, and maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean, and orderly condition (Sort, Set, Shine, Standardize, and Sustain), • Participates in Rapid Improvement Workshops (RIWs) and Kaizen events to continuously improve processes, safety, and quality, • Adheres to contamination control and HAZMAT rules and regulations, • Assists with quality inspections, complete reports/documents and any other necessary paperwork, and enforces required rework prior to customer, • Works overtime as required by workload and customers’ needs, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Ability to read, write and understand work instructions, policies, and procedures, • Ability to effectively present information in one-on-one and small group situations, • Basic knowledge of equipment and dimensional tools, including their uses, and maintenance, • Basic knowledge with current computer software, related hardware, and machine electronic systems, • Ability to adapt to changing schedules and exhibits time management skills, • Ability to develop thinking and problem-solving skills to learn and understand Root Cause Corrective Action (RCCA) process, • Ability to work independently and as part of a team, • Ability to operate hand tools, power tools, pneumatic tools, and equipment Education and Experience: • High school diploma or equivalent preferred, • Up to two years of related experience and/or training or equivalent experience preferred, • Working knowledge of Standard Work Safety, Quality and Process Elements related is preferred Supervisory Responsibilities: • None Travel: • None Physical Requirements: • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently lifts and moves materials and equipment weighing up to 35 lbs. Work Environment: • Requires wearing proper protective and safety equipment (PPE), • Regularly works around moving equipment and exposed to flashes of light from welding, and loud noise levels, • Exposure to small quantities of chemicals, dust, steam, high-pressure water and high-speed rotating equipment, • Required to perform work in cramped spaces and/or on elevated surfaces Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-MFG

Job Description HOLT Manufacturing in Waco, Texas is seeking a CNC Press Break Operator. The CNC Press Break Operator is responsible for operating our 350 Ton and 1000 Ton ACCURPRESS brake machines to shape various types of metal. The hours for this position will be Friday Through Sunday, 3rd Shift 5:00 am to 5:30 pm. Essential Functions: • Demonstrates the ability to read drawings and blueprints and program the break to run bend and forming operations while using standard and custom dies, • Checks overall dimensions using micrometers, dial indicators, calipers, gauges, and other precision-measuring instruments to ensure tight tolerances., • Compensate for bend allowances for various sheet metal thicknesses., • Perform routine maintenance on the machine., • Works as a member of the manufacturing team to provide high-quality products that satisfy the customer (internal and external) and achieve manufacturing goals, • Learns and performs setup and utilize plasma and oxy CNC cut machines to produce “Burn to Shape” / cut parts, loading component parts to Plasma, Oxy Cut, Shear, Press, and Roll equipment, • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standard, • Requires regular and punctual employee attendance, • Working experience with Computer Numerical Control (CNC) operated press brakes and the ability to compensate for bend allowances for various sheet metal thicknesses., • Ability to perform routine maintenance on the press brakes, • Ability to maneuver safely and work underneath equipment, • High school diploma or equivalent required, • Minimum 2 – 4 years of computer operating machinery and manufacturing experience required, • Trained and skilled in the use of micrometers, dial indicators, calipers, gauges, and other precision-measuring instruments to ensure tight tolerances, • Experience in operating an automated shear to cut steel sheets and plates preferred, • Valid Driver’s license required, • Ability to obtain a forklift license., • Extended periods standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of hands, this position requires good manual dexterity and coordination, • Communicates with customers, service managers, and co-workers, • Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work, • Frequently lifts and moves materials and equipment up to 50lb approximately 5 times a day, • Regularly works indoors around moving mechanical parts and may be exposed to temperature extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Requires wearing proper protective and safety equipment (PPE), • Exposure to small quantities of chemicals, dust, overhead crane operations, heavy plate material, and high-pressure forming machines, • Required to perform work in cramped spaces and/or on elevated surfaces Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-MFG

We’re looking for dedicated individuals to join our team as Welders - Flux Core and/or Mig. As a Welder, you will play a crucial role in our manufacturing process, ensuring high-quality work and contributing to our success. The ideal candidate will possess strong attention to detail, excellent problem-solving skills, and the ability to work collaboratively in a team environment. Job Title: Welder - Flux Core and/or Mig Location: Waco, TX Pay Range: Typically between $23-$28/hr Shift: 2nd Shift (4pm to 2:30am Monday through Thursday), Weekend Shift (5am to 5:30pm Friday through Sunday) What's the Job? • Perform welding tasks using Flux Core and/or Mig welding techniques., • Ensure all welds meet quality standards and specifications., • Collaborate with team members to maintain a safe and efficient work environment., • Conduct routine maintenance on welding equipment to ensure optimal performance., • Minimum of 3 years of welding experience; 5 years preferred., • Proficiency in Flux Core and/or Mig welding., • Ability to read and interpret blueprints and technical drawings., • Strong attention to detail and commitment to quality., • Opportunity to work in a dynamic and supportive environment., • Potential for career advancement and skill development., • Engagement in a team-oriented culture that values collaboration., • Access to ongoing training and professional development., • Medical and Prescription Drug Plans, • Dental Plan, • Supplemental Life Insurance, • Short Term Disability Insurance About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Job Description Millwood Inc. Mission -for all who come in contact with Millwood to clearly see the love of Christ in all that we do. Millwood, Inc. demonstrates and encourages industry-leading innovation (with God, all things are possible), service (serving Christ and others), stewardship (caring for our Team, suppliers, customers and resources) and sustainability (preserving God’s creation for future generations). We serve as the single-source provider of proven load carrying, securement and damage prevention solutions, management services with or without dedicated facilities, erosion control and lumber products, all founded and built on the gospel of Jesus Christ. Millwood brings an ever-expanding portfolio of products and engineered solutions through its national footprint including over 1,800 dedicated Team members in 41 locations across North America. Millwood is committed to fulfilling its mission and the growth of 1) People, 2) Presence, 3) Products and 4) Profitability for generations of Millwood Team members to come. Maintain, troubleshoot and repair all machinery and power units on site, including Electrical, Mechanical, Hydraulic and Pneumatic components • Repair electric hand tools and motors, • Light fabrication included, cutting and welding, • Keep accurate log record and order parts as necessary, • Experience with electricity up to 480V, Motor Control Circuits and VFD Controllers., • Experience with powered roller conveyor systems, hydraulic and pneumatic systems., • Sawmill experience preferred, • PLC. experience is a plus, programming preferred, but not required, • DOT brake and inspection Certification is a plus., • Perform repairs on field equipment repairs, • Providing high quality repair service on equipment, • 401(k) matching, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Referral program, • Vision insurance, • Dental Insurance Pay: • Industrial Maintenance: 2 years (Required), • Electrical experience: 2 years (Required), • Conveyor installation, welding, electrical: 2 years (Required), • Schematics: 1 year (Required)

Job DescriptionBenefits: • Competitive salary, • Opportunity for advancement, • Paid time off Benefits/Perks: • Competitive Pay, • Paid Vacation and Holiday, • Performance Bonus, • Ongoing Training Opportunities A Successful FASTSIGNS Electrical Sign Installer is able to: • Install, troubleshoot, and repair electrical signage, including LED and neon signs., • Interpret sign designs and electrical schematics to ensure accurate installation., • Conduct site inspections to plan and prepare for sign installations., • Ensure compliance with local, state, and federal electrical codes and safety standards., • Collaborate with team members to complete projects within deadlines., • Maintain tools, equipment, and work areas in a clean, organized, and functioning state., • Clean driving record, • Proficiently uses hand and power tools, • Scissor lift and bucket truck experience required, • Experience installing a variety of signs required, • Valid Texas Journeyman Electrician license REQUIRED., • Minimum 3 years of experience in the sign industry or a similar field., • Strong understanding of electrical systems related to signage., • Proficiency in reading blueprints, schematics, and technical drawings., • Ability to work at heights using ladders, scaffolding, or lifts., • Valid driver's license with a clean driving record., • Excellent problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • A welding certification and/or CDL license would be a plus but is not required., • Crane operator license is a plus!, • Must be able to pass both a drug screen and background check Do you enjoy working with people? Do you enjoy helping people solve problems by offering advice and consultation? Are you looking for a job that offers constant learning, skills growth and a career path? If so, we are looking for employees just like you in the ever-changing Sign Industry. Apply today!

Job DescriptionSynergy Preserve LLC has a wide range of experience when it comes to renovating and maintenance. We specialize in property management and facility maintenance for residential and commercial properties. We are looking for some dynamic technicians around Waco area Texas, who will represent Synergy Preserve LLC to its clients and customers and provide better service in the field. Responsibilities • Perform general maintenance and repairs in various areas such as plumbing, electrical, carpentry, and HVAC., • Conduct routine inspections of facilities and equipment to identify any issues or potential problems., • Respond to work orders and prioritize tasks based on urgency and importance., • Fabricate or repair equipment as needed- Supervise and coordinate external contractors for specialized repairs or projects., • Provide excellent customer service by addressing inquiries and resolving maintenance-related issues promptly.Experience, • Proven experience in facilities maintenance or a similar role., • Strong mechanical knowledge and proficiency in various trades (plumbing, electrical, carpentry, HVAC)., • Ability to read and interpret schematics and technical manuals - Welding experience is a plus., • Excellent communication skills in English, both verbal and written., • Ability to work independently with minimal supervision., • Strong problem-solving skills and attention to detail. This job description is not intended to be all-inclusive. The employee may be required to perform other related duties as assigned to meet the ongoing needs of the organization. If you are a skilled Handyman looking for a challenging opportunity with room for growth, we invite you to apply. We offer competitive compensation, benefits, and a supportive work environment. Join our team today! Powered by JazzHR 1f5Lw4KAUv

Job Description Job Summary: This position is responsible for performing basic manufacturing weld fabrications of various products or components. The MFG Welder 1’s primary purpose is to learn, develop, and gain experience as a Welder and receive on-the-job training (OJT) including: understanding drawings and blueprints, and adhere to standard procedures in the use of equipment when setting up parts, tack welding, stitch welding, and seal welding. Entry-level position – Generally has less than two years of experience and/or demonstrated job relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform the functions of the job; works under immediate supervision. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Adheres to guidelines and procedures in setting up, tack/stitch weld subassemblies, and full product utilizing various tools and fixtures, • Learns and performs how to interpret blueprints, drawings, and all welding processes through weld symbols and call outs, • Learns and performs how to complete work orders, fabrication, and welding on product and their components, • Learns and performs basic oxy/acetylene torch cutting and welding of multiple different welding processes, • Performs in accordance to Standard Operating Procedures (SOP) with job tasks and maintains consistency between work shifts and work areas, • Transports material in area or between areas utilizing overhead crane, jibs, carts, magnets and other devices, • Works as a member of the manufacturing team to provide high quality products that satisfy the customer (internal and external) and achieves departmental goals, • Maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean, and orderly condition Operator Performed Maintenance (OPM and 5S), • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • Adheres to contamination control and HAZMAT rules and regulations, • Communicates with team on established standard work variances on production line processes, • Preforms quality inspections, complete reports, documents, and/or any other necessary paperwork, and enforces required rework prior to customer, • Works overtime as required by workload and customers’ needs, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Basic knowledge of weld equipment and dimensional tools, including their uses and maintenance, • Basic knowledge of specification and drawing interpretations; e.g. drawings, blueprints and computers and the use of equipment needed to fabricate and perform in the task at hand, • Basic knowledge with current computer software, related hardware, and machine electronic systems, • Developing good work habits, accuracy and exceptional attention to detail and quality of work and awareness, • Ability to develop technical skills to become a skilled qualified welder and fabricator to effectively perform assigned welding tasks, • Ability to read, write, and understand information, • Adaptable to changing schedules and exhibits time management skills, • Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication, • Ability to develop thinking and problem-solving skills to learn and understand Root Cause Corrective Action (RCCA) process, • Required to work as part of a team with a strong work ethic being dependable, reliable and honest with demonstrated integrity, • Required to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding, • Required to be a self-starter and self-motivated with an exceptional safety record o Winning Together with DiSC Education and Experience: • High school diploma or equivalent preferred, • Two years of work-related skill, knowledge, or experience preferred, • Basic Welding Certifications in the GMAW welding process in the 1-3 G/F positions preferred Supervisory Responsibilities: None Travel: • Valid Driver’s license required Physical Requirements: • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath blocked and cribbed product, • Frequently lifts and moves materials and equipment weighing up to 50 lbs. Work Environment: • Requires wearing proper protective and safety equipment (PPE), • Regularly works indoors around moving equipment and exposed to flashes of light from welding, and loud noise levels; may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water and high-speed rotating equipment, • Possible exposure to minor burns and cuts – must be reported for proper treatment Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Job Summary: The Manufacturing Floor and Quality Assurance Supervisor is a key role in managing the manufacturing process and ensuring high-quality products. Responsibilities include overseeing the floor team and fostering the development of both competence and commitment among team members. The individual aligns objectives, development levels, and leadership styles, conduct timely performance reviews, and support team members in adhering to safety protocols and maintaining consistent quality standards. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Hires, develops, evaluates, and influences effective and consistent productivity and teamwork to ensure the delivery of Legendary Customer Service (LCS), • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models and processes to ensure alignment with our Vision, Values, and Mission, • Coaches, mentors, and trains Team Members; task and behavior oriented, • Performs job duties of other team members such as Lead & Quality Champions or Section Manager during periods of his/her absence, • Provides regular input to direct Manager regarding the achievement of targeted goals around the manufacturing and quality assurance processes, • Collects data and updating metric boards as needed, • Helps create and update Standard Work, implement and embed Lean manufacturing principles, • Provides quality assurance inspections of completed tasks, resolving issues related to safety, quality, velocity, and cost, • Assists with Value Stream Optimization through the engagement of In Process Validation (IPV) and Quality Gate methodologies, • Understands the overall flow of the line and technical aspects of the process in area of responsibility, • Adjusts line staffing to meet flow requirements, supporting the section’s production plan, • Translates the direction set by the Section Manager to task assignments for each Team Member in the given area to meet the section’s plan/requirements, • Models and teaches fundamental Lean principles, commit to successful implementation, and continually look for and identify waste, • Communicates effectively with various teams to report out on the area’s status relative to plan, • Meets production requirements while maintaining a positive working relationship with Team Members on the line, • Assists in leading in Rapid Improvement Workshops (RIWs) and Kiazen events to continuously improve processes, safety, and quality, • Troubleshoots and diagnoses defects, participating in Root Cause Corrective Action (RCCA) team to eliminate reoccurrence, • Updates job knowledge by participating in educational opportunities, e.g., Technician Training Path, • Ensures the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean, and orderly condition (Operator Performed Maintenance – OPM, and 5S), • Participates or leads Process Improvement Dialogs in their area of responsibility, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Demonstrated skills in developing, coaching, and training others, • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems, • Effective utilization of organizational, planning, self-management, problem solving, time management, and multi-tasking skills, • Sound decision-making and judgment skills, • Strong communication skills along with the ability to effectively collaborate with outside individuals, groups, and cross functional teams, • The ability to listen to and understand information and ideas presented through spoken words and sentences, • Ability to work in fast paced environment with frequent interruptions, • High school diploma or equivalent required or combination of education, training or experience that provides the required knowledge, skill, and abilities, • Up to two years of evaluating business processes, quality and efficiency improvements required, four preferred, • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, hands; requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Be able to maneuver safely and work underneath equipment and cribbed products, • Frequently lifts and moves materials and equipment weighing up to 50 lbs., • Regularly works indoors around moving equipment and exposed to flashes of light from welding, and loud noise levels, • Exposure to small quantities of chemicals, dust, steam, high-pressure water and high-speed rotating equipment, • May work in extremely bright or inadequate lighting, • Exposure to high noise levels and body vibration, • May be required to work in confined workspaces, awkward positions, and high places Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-MFG

Job Description Job Summary: Holt Manufacturing is seeking a Manufacturing Finish Welder for its Waco, Texas Location. This position is responsible for performing welding for the manufacturing of various products and components following established procedures and guidelines. Able to work independently and as a member of a team to provide welding services that satisfy internal and external customer requirements and achieve manufacturing goals. A minimum of five to eight years of experience and/or demonstrated job-relevant knowledge/skills and has obtained welding certifications in the FCAW, GMAW, and SMAW welding processes (1thru 3 G/F). A MFG Finish Welder has moderate knowledge of standard and technical concepts, practices, and procedures. The hours for this position are Monday - Thursday 6am – 4:30pm What can HOLT Manufacturing offer you? • A competitive salary, commensurate with your experience and competencies., • A comprehensive and robust benefits program that includes complete health care, 401(k) matching & Profit-Sharing plan (ROTH and traditional), paid holidays, and a front-loaded PTO program., • A Tuition Reimbursement program to support the pursuit of accredited college courses., • Follows and assists in the development of weld guidelines and procedures for subassemblies and full products utilizing various tools and fixtures, • Teams with engineering to develop new fabrication weldment procedures utilizing drawings, blueprints, and welding symbols in coordination with current standard work, • Participate in Rapid Improvement Workshops (RIWs) and Kaizen events to continuously improve processes, safety, and quality, • Performs skills to interpret blueprints, drawings, and all welding processes through weld symbols and callouts, • Trained in confined space safety requirements and procedures, and performs with the safety of self and others as a priority in all confined space situations, • Performs basic skills to complete work orders, fabrication, and welding on the product and its components, • Ensures all weldments comply with specific welding codes, procedures, and quality standards, • Performs complex carbon arc gouging, oxy/acetylene torch cutting, and welding of multiple different welding processes, • Performs and completes tasks with minimal supervision, • Assists with training, coaching, and mentoring Finish Welder I and Weld Fabricators, • Updates job knowledge by participating in educational opportunities; e.g., ProTech Welder Training Paths, • Performs processes as outlined in Standard Work to develop and maintain consistency between shifts and areas, • Transports material in the area or between areas utilizing overhead cranes, jibs, carts, magnets, and other devices, • Works as a member of the manufacturing team to provide high-quality products that satisfy the customer (internal and external) and achieve manufacturing goals, • Owns performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean, and orderly condition (Operator Performed Maintenance – OPM, and 5S), • Observes and adheres to all safety aspects/policies/training/callouts at all times and requires reporting of all near misses and incidents, • Adheres to contamination control and HAZMAT rules and regulations, • Performs quality inspections, completes reports/documents, and any other necessary paperwork, and enforces required rework after the customer, • Communicate variances to established processes for an area or product, • Performs other duties as assigned, • Works overtime as required by workload and customers’ needs, • Ability to effectively present information in one-on-one and small group situations to other employees at different levels of the organization, • Knowledge of equipment and dimensional tools, including their uses, and maintenance, • Knowledge of specification and drawing interpretations; e.g. drawings, blueprints, and computers, and use of equipment needed to fabricate and perform the tasks at hand, • Knowledge and experience with welding symbols, construction math, metallurgy, and technical report writing, • Knowledge of multiple welding areas across multiple manufacturing value streams, • Ability to deal with problems involving concrete variables in standardized situations including defining problem description and next steps (containment), • Knowledge of current computer software, related hardware, and machine electronic systems, • Display good work habits, accuracy and exceptional attention to detail, and quality of work and awareness, • Demonstrated verbal and written communication skills, • Demonstrates proficiency skills with a cutting torch, layout and fit-up tools, blueprints, drawings, and defined welding processes, • The ability to demonstrate technical skills as a skilled welder and fabricator to effectively perform assigned welding tasks, • Adaptable to changing schedules and exhibits time management skills, • Ability to follow logical troubleshooting and standard operating procedures when performing welding processes, • Ability to develop thinking and problem-solving skills to learn and understand the Root Cause Corrective Action (RCCA) process, • Ability to work independently and as part of a team with a strong work ethic being dependable, reliable, and honest with demonstrated integrity, • Ability to follow standard work to ensure quality work, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding, • Knowledge of portable bore welding equipment and different NDT methods, • Ability to work in confined space entry; Methane/02 Deficiency, • High school diploma or equivalent preferred, • A minimum of five years’ experience of work-related skill, knowledge, or experience preferred; five years or more required, • Multiple Welding Certifications required in the FCAW, GMAW, and SMAW welding processes in the 1-3 G/F positions Additional Requirements: • Valid Driver’s license Required, • A significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, and hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbing up and down ladders and/or equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath blocked and cribbed equipment, • Requires wearing proper protective and safety equipment (PPE), • Regularly works around moving equipment and is exposed to flashes of light from welding, and loud noise levels, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Required to perform work in cramped spaces and/or on elevated surfaces and/or designated confined spaces Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-MFG

Job Description Job Title: Production MIG WelderShift: 2nd Shift and 3rd Shift AvailableLocation: Waco, TX areaPay: $20-$24/hr DOEJob Type: Full-time, Temp to Perm Crouch Staffing Solutions, Inc. is currently seeking an experienced and skilled Welder to join our team and contribute to the success of our projects!Responsibilities: Welding: • Perform welding tasks primarily using MIG techniques to assemble or repair metal structures and equipment., • Experience with MIG welding is required., • Experience with other welding techniques (TIG, ARC) is preferred., • Interpret and follow blueprints, specifications, and schematics to ensure accurate welds.Quality Control:, • Inspect welded surfaces, structures, and components to ensure they meet company and industry standards., • Address and rectify any defects or issues in the welding process.Safety Compliance:, • Adhere to safety protocols and guidelines to ensure a secure work environment., • Utilize personal protective equipment (PPE) and follow safety procedures at all times.Equipment Maintenance:, • Maintain and clean welding equipment regularly to ensure optimal performance., • Report any equipment malfunctions or issues to the supervisor., • Collaboration:, • Coordinate with other team members and departments to complete projects efficiently., • Communicate effectively with supervisors and colleagues to ensure a smooth workflow.Qualifications:, • Proven experience as a Welder in a similar work environment., • Significant experience with structural MIG welding is required., • Experience with other welding techniques (TIG, ARC) is preferred., • Ability to read and interpret blueprints, schematics, and welding symbols., • Strong attention to detail and commitment to producing high-quality work., • Knowledge of safety procedures and willingness to follow them rigorously., • Physical stamina and strength to perform welding tasks and handle materials.

Job Description Job Summary: This position is responsible for performing basic manufacturing weld fabrications of various products or components. The MFG Welder 1’s primary purpose is to learn, develop, and gain experience as a Welder and receive on-the-job training (OJT) including: understanding drawings and blueprints, and adhere to standard procedures in the use of equipment when setting up parts, tack welding, stitch welding, and seal welding. Entry-level position – Generally has less than two years of experience and/or demonstrated job relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform the functions of the job; works under immediate supervision. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Adheres to guidelines and procedures in setting up, tack/stitch weld subassemblies, and full product utilizing various tools and fixtures, • Learns and performs how to interpret blueprints, drawings, and all welding processes through weld symbols and call outs, • Learns and performs how to complete work orders, fabrication, and welding on product and their components, • Learns and performs basic oxy/acetylene torch cutting and welding of multiple different welding processes, • Performs in accordance to Standard Operating Procedures (SOP) with job tasks and maintains consistency between work shifts and work areas, • Transports material in area or between areas utilizing overhead crane, jibs, carts, magnets and other devices, • Works as a member of the manufacturing team to provide high quality products that satisfy the customer (internal and external) and achieves departmental goals, • Maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean, and orderly condition Operator Performed Maintenance (OPM and 5S), • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • Adheres to contamination control and HAZMAT rules and regulations, • Communicates with team on established standard work variances on production line processes, • Preforms quality inspections, complete reports, documents, and/or any other necessary paperwork, and enforces required rework prior to customer, • Works overtime as required by workload and customers’ needs, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Basic knowledge of weld equipment and dimensional tools, including their uses and maintenance, • Basic knowledge of specification and drawing interpretations; e.g. drawings, blueprints and computers and the use of equipment needed to fabricate and perform in the task at hand, • Basic knowledge with current computer software, related hardware, and machine electronic systems, • Developing good work habits, accuracy and exceptional attention to detail and quality of work and awareness, • Ability to develop technical skills to become a skilled qualified welder and fabricator to effectively perform assigned welding tasks, • Ability to read, write, and understand information, • Adaptable to changing schedules and exhibits time management skills, • Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication, • Ability to develop thinking and problem-solving skills to learn and understand Root Cause Corrective Action (RCCA) process, • Required to work as part of a team with a strong work ethic being dependable, reliable and honest with demonstrated integrity, • Required to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding, • Required to be a self-starter and self-motivated with an exceptional safety record o Winning Together with DiSC Education and Experience: • High school diploma or equivalent preferred, • Two years of work-related skill, knowledge, or experience preferred, • Basic Welding Certifications in the GMAW welding process in the 1-3 G/F positions preferred Supervisory Responsibilities: None Travel: • Valid Driver’s license required Physical Requirements: • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath blocked and cribbed product, • Frequently lifts and moves materials and equipment weighing up to 50 lbs. Work Environment: • Requires wearing proper protective and safety equipment (PPE), • Regularly works indoors around moving equipment and exposed to flashes of light from welding, and loud noise levels; may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water and high-speed rotating equipment, • Possible exposure to minor burns and cuts – must be reported for proper treatment Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job DescriptionTitle: Lead Maintenance TechnicianLocation: Waco, TX 76710Pay: $28–$30/hrSchedule: Monday–FridayApply at Overview Crouch Staffing Solutions, Inc. is seeking an experienced Lead Maintenance Technician to support production operations, oversee maintenance activities, and ensure equipment reliability. This position combines hands-on work with leadership responsibilities, including training technicians, planning preventive maintenance, supporting production uptime, and ensuring facility safety and compliance.Key Responsibilities- Partner with the Production Manager to maintain efficient and high-quality production operations.- Schedule and execute preventive maintenance to maximize equipment life and reduce downtime.- Train, mentor, and audit PM Technicians; ensure all PM tasks are completed correctly.- Oversee facility maintenance to ensure optimal function, safety, and professional appearance.- Assign daily maintenance tasks based on technician competency and project needs.- Evaluate technician performance and provide guidance regarding training, tools, and resources.- Build a high-performing maintenance team with strong troubleshooting capabilities and minimal skills gaps.- Support scheduling and hiring efforts to ensure proper coverage, including second shift needs.- Respond to off-hours maintenance calls as needed to prevent production disruption.- Collaborate with the Safety Officer to maintain OSHA compliance and complete monthly audits.- Oversee inspections for hoists, forklifts, and other safety-regulated equipment; maintain required records.- Identify and implement continuous improvements for equipment reliability, safety, efficiency, and quality.Skilled Trade Duties- Refrigeration, plumbing, HVAC repair; pipe work, welding, metal fabrication.- Diagnostics and repair of heaters, furnaces, and electronic ignition systems.- Operation of saws, drill presses, and hand/power tools.- Electrical troubleshooting, wiring/fixture repair, motors, lighting circuits, and fan systems.- Building repairs including windows, doors, roofing, furniture assembly, and structural work.- PLC, VFD, and servo troubleshooting.- Mechanical and electrical maintenance, replacement of circuits, switches, and components.- Recordkeeping for labor, materials, and work orders; enter updates in Limbel system.- Tool and material purchasing, operating company vehicles for pickups/deliveries.- Perform other duties as assigned; maintain regular attendance.Knowledge & AbilitiesKnowledge of:- Scheduling, work assignment, and maintenance planning.- Safety procedures, codes, and regulations.- Storage, recordkeeping, and maintenance best practices.- Tools, equipment, and methods used in electrical, HVAC, plumbing, carpentry, welding, and general maintenance.Ability to:- Perform journey-level maintenance tasks across multiple trades.- Assign, guide, and review work of maintenance personnel.- Interpret codes, regulations, blueprints, schematics, and work orders.- Operate tools, equipment, forklifts, and vehicles safely.- Accurately use tape measures, calipers, and micrometers.- Estimate labor and material costs.- Maintain records and meet timelines with minimal supervision.- Lift up to 75 lbs and perform physically demanding tasks.- Work in environments with heat, cold, dust, fumes, and moving machinery.Education & Experience- High school diploma or GED required.- Minimum four years of experience in one or more skilled trades.Licenses & Requirements- Valid Texas driver’s license with a clean driving record.

Job Description Job Summary: This position is responsible for performing assembly and installation of different manufacturing components and/or parts and provide mechanical and electrical services, following established procedures and guidelines. Can work independently and as a member of a team to provide technical services that satisfy internal and external customer requirements to achieve manufacturing goals. Entry-level position – Generally has two or more years of experience and/or demonstrated job relevant knowledge/skills. The MFG Technician II relies on instructions and pre-established guidelines to perform functions of the job and has basic knowledge of standard and technical concepts, practices, and procedures. The MFG Technician II performs a variety of standard, complex, and technical tasks to include mechanical and electrical; works under moderate supervision; a team member of product production and flow. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. What can HOLT Manufacturing offer you? • A competitive salary, commensurate with your experience and competencies., • A comprehensive and robust benefits program that includes complete health care, 401(k) matching & Profit-Sharing plan (ROTH and traditional), paid holidays, and a front-loaded PTO program., • A Tuition Reimbursement program to support the pursuit of accredited college courses., • An employee development program with professional development staff that allows you to grow your skills and build your competencies to prepare you for future opportunities at HOLT. Essential Functions: • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs in accordance to guidelines and procedures with proper setup and provide mechanical/electrical services that satisfies customer requirements and achieves manufacturing goals, • Performs assembly and disassembly of basic procedures utilizing drawings, blueprints, and symbols in coordination with current standard work for generator sets, engine packages, water tanks, and other manufactured products including custom product to meet customer requirements, • Participates in Rapid Improvement Workshops (RIWs) and Kiazen events to continuously improve processes, safety, and quality, • Learns and performs skills to interpret blueprints, drawings, and installation processes, • Assists in removal and installation of parts; disassembles and assembles components, • Performs basic skills to complete work orders and assembly of products and their components, • Ensures all installations/builds are in compliance with specific procedures and quality standards, • Performs basics to troubleshoot and diagnose malfunctions and failures; participate in Root Cause Corrective Action (RCCA) team to eliminate reoccurrence, • Performs and completes tasks with immediate supervision, • Communicates job progress, issues, solutions and improvements to team, • Performs processes as outlined in Standard Work to develop and maintain consistency between shifts and areas, • Updates job knowledge by participating in educational opportunities; e.g., Pro-tech Technician Training Path, • Learns and performs processes as outlined in Standard Work to develop and maintain consistency between shifts and areas, • Transports material in area or between areas utilizing overhead crane, jibs, carts, magnets and other devices, • Works as a member of the manufacturing team to provide high quality products that satisfy the customer (internal and external) and achieves manufacturing goals, • Maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean and orderly condition (Operator Performed Maintenance – OPM, and 5S), • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Adheres to contamination control and HAZMAT rules and regulations, • Assists with quality inspections, complete reports/documents and any other necessary paperwork, and enforces required rework prior to customer, • Communicate variances to established processes for an area or product, • Works overtime as required by workload and customers’ needs, • Requires regular and punctual employee attendance, • Basic knowledge of equipment and tools, including their designs, uses, repair and maintenance, • Basic knowledge and proficiency with current computer software, related hardware, and machine electronic systems, • Operation and control skills of equipment or systems, • Basic knowledge of equipment selection skills by determining the kind of tools and equipment needed to do a job, • Ability to follow logical troubleshooting procedures, • Ability to develop thinking and problem solving skills to learn and understand Root Cause Corrective Action (RCCA) process, • Ability to listen to and understand information and ideas presented through spoken words and sentences, • Ability to read, write, and understand information, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair including an overhead crane, • Ability to operate a conventional forklift, • Ability to quickly and repeatedly operate the controls of a machine or a vehicle to exact positions, • Ability to be self-starting and self-motivated, • Ability to make precisely coordinated movements of the fingers of one or both hands in order to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences, • Basic knowledge of hydraulics, transmissions, engines, gensets, and electrical, • Valid Driver’s license required, • High school diploma or equivalent required, • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath blocked and cribbed products, • Requires wearing proper protective and safety equipment (PPE), • Regularly works indoors around moving equipment and exposed to flashes of light from welding, and loud noise levels, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water and high speed rotating equipment, • May works in extremely bright or inadequate lighting, • Possible exposure to minor burns and cuts – must be reported for proper treatment, • Exposure to high noise levels and body vibration, • May be required to work in confined work spaces, awkward positions, and high places, • Possible exposure to minor burns, cuts, bites, or stings, • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Routinely reacts to visual, auditory and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath blocked and cribbed product, • Frequently lifts and moves materials and equipment weighing up to 50 lbs. Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-MFG

Job DescriptionMaintenance Technician (Day Shift)Location: Waco, TX Status: Full-TimeSchedule: Day Shift Pay Range: $22.00–$28.00 per hour (DOE) Why You’ll Want This JobCrouch Staffing Solutions, Inc. is seeking a skilled Maintenance Technician to join a stable, well-established operation that truly invests in its employees. This role offers competitive pay, excellent benefits, steady daytime hours, and quarterly production bonuses—making it an ideal opportunity for experienced maintenance professionals looking for long-term growth and work-life balance. Outstanding Benefits • 100% employer-paid Dental & Vision Insurance, • Minimum of 90% employer-paid Health Insurance, • Quarterly Production Bonuses, • Stable day-shift schedule, • Company-provided tools and equipment, • Perform maintenance and repairs on mechanical, electrical, plumbing, HVAC, refrigeration, and building systems, • Diagnose and repair motors, fans, lighting circuits, switches, receptacles, and control systems, • Perform welding and metal fabrication as needed, • Troubleshoot and repair electronic ignition systems for ovens and heaters, • Conduct routine preventative maintenance to minimize downtime, • Maintain and repair doors, windows, roofs, locks, and other building components, • Read and interpret blueprints, electrical schematics, shop drawings, and work orders, • Safely operate hand tools, power tools, saws, drill presses, and other maintenance equipment, • Assist with purchasing tools, equipment, and materials, • Maintain accurate records related to labor, materials, and work orders, • Ensure compliance with OSHA, safety standards, and federal/state/local building codes, • Support emergency repairs and larger maintenance projects as needed, • Maintain regular attendance and uphold company safety standardsKnowledge & Experience, • Strong working knowledge of at least one skilled trade, with exposure to:, • Electrical systems, • HVAC/heating & air conditioning, • Plumbing, • Carpentry, • Welding/fabrication, • Familiarity with federal, state, and local building codes, • Understanding of preventative maintenance practices, • Experience working with hydraulic, pneumatic, and electrical systems, • Basic computer and record-keeping skillsSkills & Abilities, • Ability to work independently with minimal supervision, • Strong troubleshooting and problem-solving skills, • Ability to prioritize tasks and manage time effectively, • Capable of reading tape measures, calipers, and technical documentation, • Strong communication skills, both written and verbal, • Ability to safely operate tools and equipment, • Commitment to workplace safety and quality workmanshipPhysical Requirements, • Ability to stand, walk, bend, climb, and lift as required

Job Description Job Summary: The Logistics Associate I is responsible for meeting Operations delivery and kitting requirements. Job duties include receiving, storing, handling, shipping, inventorying, and preparing product for customer delivery while demonstrating and promoting safe behaviors and processes. This requires working independently, with specific direction or as a member of a team. What can HOLT Manufacturing offer you? • A competitive salary, commensurate with your experience and competencies., • A comprehensive and robust benefits program that includes complete health care, 401(k) matching & Profit-Sharing plan (ROTH and traditional), paid holidays, and a front-loaded PTO program., • A Tuition Reimbursement program to support the pursuit of accredited college courses., • An employee development program with professional development staff that allows you to grow your skills and build your competencies to prepare you for future opportunities at HOLT. Essential Functions: • Models and promotes alignment with HOLT’s Vision, Values, and Mission, • Adheres to guidelines and procedures to load, unload, store, and disburse inventory material to assist in satisfying customer requirements and achieving manufacturing goals, • Ensures parts and finished product by locating and staging for shipment, • Transports material in area or between areas utilizing carts, tuggers, cart caddies, forklifts, and other devices, • Maintains kitting processes and best practices for operations and external customers, • Maintains all company equipment and work/storage areas in a good, clean, and working order, • Observes and adheres to all safety aspects/policies/training/call outs at all times and requires reporting of all near misses and incidents, • Works overtime as required by workload and customers’ needs, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Basic knowledge and proficiency with current computer software and related hardware, • Ability to operate a conventional forklift, • Ability to quickly and repeatedly operate the controls of a machine or a vehicle to exact positions, • Good verbal and written communication skills, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences Education and Experience: • High school diploma or equivalent required, • Minimum of one year experience on various sizes of forklifts, • Prior Material Tracking System (MTS) experience preferred Supervisory Responsibilities: • None Travel: • None Physical Requirements: • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing and reaching, • Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Must be able to precisely coordinated movements of the fingers of one or both hands in order to grasp, manipulate, or assemble very small objects, • Routinely reacts to visual, auditory and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently lifts and moves materials and equipment weighing up to 50 lbs. Work Environment: • Requires wearing proper protective and safety equipment (PPE), • Regularly works around moving equipment and exposed to flashes of light from welding, and loud noise levels, • Exposure to small quantities of chemicals, dust, steam, high-pressure water and high speed rotating equipment, • Works in awkward potions and high places, • Works in an enclosed and open vehicle or equipment Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-WB1 #LI-MFG

Job Description Job Summary: HOLT CAT is looking for a College Intern to work with our CAT Support team and will be under the direct guidance of an experienced Shop Service Supervisor to receive on-the-job training. The intern's primary purpose is to learn and develop an understanding of the overall CAT Support Service Department operation. Essential Functions: • Receive coaching, mentoring, and feedback from leadership, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Perform maintenance, • Help install, repair, and replace mechanical and electronic components, • Clean and/or lubricate machines, • Examine and test equipment, components, and parts to ensure the proper functioning, • Adjust, connect, or disconnect wiring, piping, tubing, and other parts, using hand or power tools, • Adjust, maintain, and repair equipment and machine components, • Perform welding and other NDT tasks to ensure standards are met, • Self-motivated with a strong work ethic and willingness to learn, • Basic computer skills, • Good written and verbal communication skills, • Time management and organizational skills, • Basic math calculations and the ability to read, write, and understand work instructions Education and Experience: • No travel is expected for this position Physical Requirements: • This role frequently communicates with others, and must be able to exchange accurate information in these situations Work Environment: • Frequently works at a fast pace with unscheduled interruptions Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

This role is responsible for performing a variety of maintenance tasks on corrugated equipment, including diagnosing, repairing, and rebuilding mechanical, electrical, hydraulic, and pneumatic systems.Technicians will work in a team environment, focusing on preventive maintenance and responding to b

AbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow.We strive to have a remarkable impact on people's lives across several key therapeutic areas immunology, oncology, neuroscience, and ey

You'll put the finishing touches on the cake for our guests.But what makes working here so sweet?.Enjoy your evenings: We close earlier than most food service jobs.We offer flexible work schedules.T-shirts and sneakers are where it's at!.It's literally a piece of cake!.This is a great place to make

The ideal candidate will have a strong background in maintenance within an industrial environment, with specific skills in electrical systems, plumbing, and welding. Utilize welding skills to fabricate, repair, or reinforce plant structures and equipment as necessary. Technical proficiency in electr

Delivery Driver] Base Pay from $2$14 + 100% Customer Tip / Promo Incentives to Increase Earnings / Weekly Deposits / Maximum Flexibility - As a Favor Runner, you'll: Deliver orders to customers in a timely and efficient manner; Communicate with customers to ensure accuracy and satisfaction; Follow a

The Service Support Representative is responsible for providing comprehensive support to the Service Department.This role ensures organizational objectives are met by maintaining the service tool inventory and providing logistical assistance for the loading, unloading, and timely delivery of machine

Are you ready to dive into a rewarding career with Smith Pump Company, a renowned leader in supplying pump products for water, wastewater, and industrial markets since 1962? Do you enjoy working with your hands but also a born problem solver who likes thinking with your head? Do you have the ability

This position is an essential part of Sherwins distribution network.This role safely loads and unloads trucks, accurately picks paint and paint-related product orders, and ships product orders to our customers.This position moves material within t Warehouse Technician, Technician, 3rd Shift, Warehou

Sherwin Williams - 2545577 [Material Handler / Freight Handler] As a Warehouse Technician at Sherwin Williams, you'll: Be responsible for accurately receiving shipments, picking orders, shipping paint and paint related products to Sherwin-Williams customers; Perform other duties as assigned.

This position is an essential part of Sherwin's distribution network.This role safely loads and unloads trucks, accurately picks paint and paint-related product orders, and ships product orders to our customers.This position moves material within the facility and from the loading platform by carryin

Pilgrim's - JobID: 16867866 [Production Operator / Assembly Line Worker] As a Production Associate at Pilgrim's, you'll: Process product using tools (to include knives), manual labor, and equipment provided; Process product according to operating procedures and quality/quantity expectations; Observe

PeopleReady - PR-1481677 [General Laborer] As a General Laborer at PeopleReady, you'll: Assist with event set up, breakdown, and general maintenance to ensure venues are clean and welcoming; Support manufacturing processes by assembling products, operating machinery, and performing quality checks; L

Schedule: Mon - Thurs; 6:00 AM - 4:00 PM .Emerald Transformer is the premier solution for electrical equipment.Emerald provides a wide range of transformer services including remanufactured transformer.Our national network of factories and service centers are strategically located to serve our broa

One of the largest HVAC contractors has shop positions available for Sheetmetal Fabricators.The ideal candidate for this position must have experience with fabricating sheet metal ductwork used for heating and air conditioning.Fabricators will be responsible for assembling HVAC sheet metal ductwork

Schedule: Mon - Thurs; 6:00 AM - 4:00 PM.Emerald Transformer is the premier solution for electrical equipment.Emerald provides a wide range of transformer services including remanufactured transformer.Our national network of factories and service centers are strategically located to serve our broad

Job description Job Summary Smith Pump Company, Inc.Since 1962, the Company has been providing products and services to these industries in a friendly and professional manner.Learn more about Smith Pump by visiting our website:.JOB DESCRIPTION: Seeking an experienced Blaster that can operate a

General Laborers - $15 per hour.Metal Recycling business - willing to train.Sorting scrap metal; Identifying various metals.Excellent hand-eye coordination skills.Preventive maintenance of equipment.Benefits and Good Starting Pay.Maintain a clean work environment.We offer good starting pay; 401K, gr

Lane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.We have a strong in-house group of field technicians that services top U.We are always looking for talented people driven to be highly productive members of the team with an

Are you ready to dive into a rewarding career with Smith Pump Company, a renowned leader in supplying pump products for water, wastewater, and industrial markets since 1962? Do you enjoy working with your hands but also a born problem solver who likes thinking with your head? Do you have

Maintenance Technician A maintenance technician is responsible for conducting general maintenance and repairs on facility equipment and property structures.Ensuring that the heating and plumbing systems perform at optimum functionality, the installations HVAC and the upkeep of the landscape.The goal

Want to learn more about The Scion Group? <a href=" hiring immediately! We are interested in every qualified candidate who is eligible to work in the United States.However, we are not able to sponsor visas.Your Opportunity</stron