Trabajos development en Doncaster - Page 7Crear alertas

Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing products. Part of the Genuit Group, we combine long-term stability with a culture built on teamwork, accountability and continuous improvement. We encourage fresh ideas, invest in development and are committed to creating a safe, inclusive and supportive workplace where everyone feels like they belong. Role Overview: The Polypipe Building Products CRM Salesforce Executive is a business-embedded power user who acts as the first point of contact for Salesforce within their area of the organisation. The role is responsible for user enablement, adoption, training, user acceptance testing, data hygiene, and translating business needs into clear, structured requirements for the central Salesforce team. This role will also be responsible for basic configuration, such as creating reports and dashboards. Superuser acts as a critical bridge between the end user and the Salesforce delivery team, driving adoption, providing first-line support, and mapping business processes. Key Responsibilities: * Design and deliver structured Salesforce training for new starters, creating and maintaining a comprehensive, role-based onboarding programme supported by ClickLearn training materials * Provide monthly one-to-one coaching sessions with sales team members, using the skills matrix to identify capability gaps, build confidence, and ensure best practice Salesforce usage * Ensure each user is fully competent in completing required GENVUE tasks, offering enhancement training and practical guidance where needed * Act as a trusted first point of contact for Salesforce-related queries, providing advice, resolving issues, and escalating technical matters to the Salesforce System Administrator through formal ticketing * Maintain a local helpdesk log to track issues, identify recurring themes, and highlight opportunities for process and system improvements * Collaborate with business departments to define and document “as is” and “to be” processes, ensuring Salesforce aligns with operational needs * Design, develop, and maintain Salesforce reports, dashboards, and list views to support users, managers, and senior leadership * Support teams in understanding and leveraging Salesforce data to drive informed decision-making and improved performance * Actively monitor and improve data quality, escalating systemic issues where technical intervention is required * Attend regional and business meetings to present system enhancements, gather user feedback, and identify improvement opportunities * Participate in regular enhancement meetings with Superusers and Business Process Owners, contributing business-focused input and practical recommendations * Support the Salesforce System Administrator with sandbox testing and pre-UAT validation to ensure enhancements are practical, user-friendly, and aligned to real-world processes * Manage onboarding and offboarding activities, maintain accurate user access and reporting structures, perform general Salesforce housekeeping, and proactively identify system friction points for remediation or enhancement Skills & Requirements: * Strong hands-on experience using Salesforce (or a similar CRM system) within a sales or operational environment, ideally as a Superuser, champion, or power user * Proven ability to train, coach, and support colleagues, with experience using tools such as ClickLearn or similar training platforms * Solid understanding of internal business processes and how systems, data models, and automation support operational efficiency and performance * Experience creating and maintaining reports and dashboards that meet the needs of users, managers, and senior leadership * High attention to detail, particularly in relation to data quality, consistency, and governance, with exposure to enhancement or governance forums * Confident communicator, comfortable working with stakeholders at all levels and acting as a bridge between business users and technical teams * Organised and methodical, with the ability to manage multiple priorities and requests, ideally within a multi-business or matrix organisation * A proactive mindset with a genuine interest in process improvement and data-driven decision-making, plus a full UK driving licence and willingness to travel if required Workings Hours & Benefits: * Monday to Friday, 08:30 – 17:00 * 25 Days annual leave * Contributory pension scheme - matched up to 8% * Life assurance * Enhanced Maternity & Paternity pay * Save as you earn Sharesave Scheme * Various health & wellbeing initiatives including complimentary occupational health on-site physiotherapy and counselling services. * Staff discount on all Genuit Group products

QHSE Manager A well-established UK manufacturing business is looking to appoint a QSHE Manager to lead and develop a newly integrated QHSE function. This is a lead role responsible for bringing Quality and HSE management together under one strategic function. The role will be vital in helping the business strengthen its product and service standards and help deliver to high customer expectations as it continues to grow its premium product offering. The position offers a chance for strategic leadership but also hands-on improvement of the end to end product lifecycle, you will drive measurable progress in quality performance, supplier accountability, service delivery as well behavioural safety. The Opportunity This role offers the chance to take full ownership of the QHSE function within a stable and well-invested manufacturing business. You will work closely with the senior leadership team to develop the QHSE strategy, strengthen Quality Control and assurance processes and build a proactive culture around Quality and safety across the organisation. Key aspects of the role include: * Leading and developing the integrated Quality, Health, Safety and Environmental strategy * Driving product Quality and service improvement * Strengthening supplier performance * Building a strong quality and safety culture across the manufacturing site * Managing and developing an experienced QHSE team of five * Acting as the senior point of contact for all QHSE matters across the business The Business The company is a long-established UK manufacturer with a strong reputation for product quality and workforce stability. Following continued investment in new product ranges and growth in their contract manufacturing division, the business is now focused on strengthening its quality systems, supplier performance and operational standards to support the next phase of growth. Role Responsibilities * Lead the development and implementation of the integrated QHSE strategy * Maintain and improve ISO management systems including ISO 9001, ISO 14001 and ISO 45001 * Drive effective root cause analysis and corrective action processes to reduce repeat issues * Develop and track quality KPIs to support continuous improvement initiatives * Lead supplier quality management, including audits and performance improvement * Promote behavioural safety and proactive hazard reporting across the workforce * Work closely with production, logistics and commercial teams to resolve quality and safety issues * Manage internal audit programmes and coordinate external certification audits * Oversee risk assessments, safe systems of work and incident investigations Requirements * Strong background in quality leadership within a manufacturing environment * Experience within product-based manufacturing * Proven track record of delivering continuous improvement initiatives * Experience managing supplier quality and audit programmes * NEBOSH General Certificate minimum (Diploma advantageous) * ISO 9001 internal auditing experience * Confident communicator able to influence across all levels of the organisation Benefits * 25 days holiday plus bank holidays (increasing with service) * Flexible working with potential for occasional home working * Pension with employer contribution * Group life assurance (4x salary) * Private health support and wellbeing services * Cycle to work scheme * Employee benefits platform If you are an experienced QHSE Manager looking to lead quality and safety strategy within a stable and growing manufacturing organisation, we would be keen to hear from you

Elior at work - Workdays Made Better with Great Food A great workday starts with great food , and we know food at work should be more than just a sandwich at your desk. That's why we bring exciting, fresh, and flexible catering to workplaces across the UK. Whether it's a quick grab-and-go snack or a hearty lunch, with tech-powered ordering and diverse menus , we keep teams happy, energised, and ready to take on the day . What you'll be doing... As a Cook Supervisor you will proactively manage teams on site as well as be accountable for recruiting, inducting, training, and supporting colleagues to deliver an efficient, high-quality service to Elior UK, our customer and clients. Motivating and managing a team Controlling and managing a budget Accountable for ensuring ongoing team communications, including building internal and external relationships, management reporting and client liaison to enable operational excellence Working Pattern: Monday to Friday | 21:00pm - 03:00am Job ID: 6288 What can you bring? Genuine interest in customer service excellence Focused on the front line Proven team leader experience Self-motivated and able to work well unsupervised Previous experience within catering desirable Brilliant Work Deserves Brilliant Perks! At Elior, we believe that when you love where you work, it shows. That's why we make sure our team feels appreciated, supported, and set up for success! Here's what's waiting for you: Free, tasty meals • Enjoy tasty, nutritious food on us while you work! Flexible working, • including part time roles, because life doesn't run on a 9-5 schedule. Plenty of Time to Unwind, • 28 days of holiday, and after two years, enjoy even more with 31 days. Leave for life's important moments, • whether family, personal or unexpected. Give back time, • paid volunteering days for the causes you care about. Room to grow, • career development and learning opportunities for all stages of your career. Wellbeing first, • mental health support and wellbeing perks. Financial security, • pension schemes and life assurance. Exclusive discounts, • save on entertainment, leisure, and even travel! One small thing - we welcome you to apply using the name you feel most comfortable with! No need for legal names at this stage. Why You'll Love Working Here We're a people-first business with over 10,000 colleagues across the UK , serving everything from stadiums to hospitals, schools to workplaces. Our mission? To enrich lives everywhere, every day. And here's the best part - 87% of our team say they're proud to work here! Why? Because we create a place where you're listened to, trusted, supported, and valued. Not sure you match every single requirement? Apply anyway! Research shows that many people - especially women and those from underrepresented backgrounds - hold back unless they meet 100% of the criteria. But we hire for potential, not just experience. If you're passionate and ready to grow, we want to hear from you! We Celebrate You! At Elior, diversity and inclusion aren't just policies, they're who we are. We know that different perspectives make us stronger, and we're dedicated to creating an environment where everyone feels seen, heard, and empowered to succeed. Need any support or adjustments during the application process? Just let us know - we're happy to help! Ready to join us? Hit 'Apply Now' and let's chat! TPBN1_UKCT

Project Manager (Rail/Infrastructure/Civils/Construction) Doncaster £55,000 - £65,000 + Great Career Progression + Training + Technically Interesting Projects + Successful International Business + 32 Days Holiday + Great Company Benefits Excellent opportunity for a highly motivated Project Manager, to join a global infrastructure business, where you'll be the key driver between numerous stakeholders and receive on-the-job training in their niche field of work. On offer is the chance to work on reputable and technically interesting national engineering projects, with a highly successful international engineering business that are offering a great package including; bonuses, share schemes, as well as great training & career development incentives. This International Infrastructure business are currently in a phase of rapid expansion due to high profitability as well as strategic growth both organic and through acquisition. They are a market leader in their field, setting the standard by employee satisfaction, excellent customer service and providing a product that is unrivalled by their competition. Due to an increased demand in work, they are seeking a highly motivated Project Manager to be a key driver in the delivery of multi-million-pound railway projects. Working on an exciting new long-term contract, you'll represent the Projects team to both internal and external key stakeholders. You'll be overseeing multi-million-pound national railway projects from design inception through the supplier and maintenance stages. You'll be getting involved in managing projects timelines, budget controls and allocating resource management. This is a fantastic opportunity to join an international business, working on highly interesting national rail projects, with on-the-job training and long-term career prospects. THE ROLE: *Overseeing and coordinating project activities from design to supply and maintenance stages *Create project plans, setting milestones so that contractual deadlines are met *Allocating resource management *Stakeholders are informed of project progress, timelines and challenges *Ensuring project budgets are maintained THE PERSON: *Experienced Project Manager *PRINCE certified/Bachelor's degree in Project Management/Business equiv. *Ideal sectors would include - Rail/Construction/Civils/Infrastructure Reference Number - BBH(phone number removed)sd Doncaster, Harworth, Sheffield, Mexborough, Maltby, Worksop, Hatfield, Rotherham, Gainsborough, Retford, Lincoln, Goole, South Yorkshire, East Riding of Yorkshire. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Role: Teaching Assistant Salary: £90 - £105 per day Location: Doncaster About Teach Match Recruitment At Teach Match Recruitment, we are dedicated to connecting schools with passionate, skilled educators who have a genuine commitment to supporting diverse learners. We are currently recruiting for experienced Level 2 and Level 3 Teaching Assistants looking for long term placements to join a dynamic and inclusive school setting. Why Work with Teach Match Recruitment? Expert Support: Access to a dedicated recruitment consultant who will support you with your recruitment journey. Competitive Pay: Offering competitive pay rates based on experience and qualifications. Access to Exclusive Roles: As a Teach Match candidate, you'll have access to exclusive, high-quality, long term support roles across schools within South Yorkshire. Ongoing Professional Development: Opportunities for continuous learning and career development in the education sector. Job Overview We are looking for experienced Teaching Assistants (TA) to work within our network of schools in Doncaster. The successful candidates will have the opportunity to make a real impact by providing tailored support to students, fostering a nurturing environment, and helping them thrive both academically and emotionally. Main Responsibilities: Provide tailored support to students, helping them manage emotions, behaviour and make academic progress. Support teachers in delivering lessons and adapt materials to meet students' needs. Implement behaviour management strategies to encourage positive behaviour and emotional stability. Track and report on students' emotional, social, and academic progress. Communicate effectively with teachers, parents, and external professionals to ensure holistic support. Follow safeguarding policies to ensure the safety and well-being of all students. SHEFTA

Engineering Design Manager – Doncaster – £competitive. Overview: We are inviting applications for this critical appointment from experienced engineering designers with management capabilities who will interpret and challenge our client’s engineering design function, advise on best practice, most appropriate design suites, recognise issues and drive improvements. This business design and install material handling machinery and equipment and the design function needs a capable, professional and motivational leader to ensure continued growth and development and to represent the business at senior management level. The role: Managing a team of engineering cad technicians, ensuring designs are robust, compliant and delivered on time, you will use your excellent knowledge of heavy engineering design and experience of 2D and 3D software and packages, to take ownership, ensuring high-quality, compliant and cost-effective designs are delivered in line with customer and business requirements. Managing changes in complex designs similar to those found within mining, processing and motor driven systems. Reporting to the head of operations and collaborating with all departments to leverage shared resources and expertise for innovation and efficiency. The engineering design manager is a highly communicative position as you will act as a key interface between the design office, production, projects, service and sales teams, supporting manufacturing and installation teams by resolving design queries and technical issues and contributing to project reviews, technical meetings and business planning activities. Requirements: It is essential that applicants have proven experience managing a design team within a heavy Industrial machinery design, manufacturing and engineering environment. Strong working knowledge of engineering design standards and practices and proficiency in relevant CAD systems (e.g. SolidWorks, AutoCAD or similar). It is expected that the post holder will have a degree or HNC/HND in Mechanical or Manufacturing Engineering (or equivalent) along with experience of engineering designing. Benefits: As well as a competitive salary, the engineering design manager, can expect: Hours of work: Monday to Thursday: 8am – 5pm, finishing at 4.30pm on Fridays. Holidays: Up to 34 inc. over 5 years (20 days plus your birthday, plus bank holidays and an additional day for every completed 12 mths of the holiday calendar year, up to a maximum of 25 Days). Extras: Regular company social events, including a summer BBQ, Christmas brunch etc. Access to an Employee Assistance Programme for confidential support and wellbeing advice. Discounted gym memberships to support health and wellbeing. Death in Service cover. Free on-site parking. Travail Employment Group is acting as an employment agency in this instance

CAD Doncaster – c.£35k DOE Overview: Our client design and install material handling machinery and equipment and this exciting opportunity is critical for their continued international growth and development. We are inviting applications from CAD Technicians with a range of experience from engineering design graduates to experienced 3D engineering design technicians. The role: Part of a team of engineering cad technicians, you will be using 2D and 3D Inventor to create or modify complex designs similar to those found within mining, processing and motor driven systems. This includes mechanical components, mechanical assemblies, structural steelwork drawings and BOMs. This position is key to the success of the business and works hand in hand with other teams and so close liaison is required with sales, production, site installation etc to resolve issues in house and occasionally on site. Requirements: It is essential that applicants have a minimum of HNC in Mechanical Engineering or a related discipline along with 3D CAD, Autodesk Inventor is preferred but other similar 3D CAD packages will be considered e.g. SolidWorks, Solid Edge etc. You will also need knowledge of mechanical and structural engineering, manufacturing processes and a positive, can-do attitude. Benefits: As well as a salary of c.£35k depending on skills, abilities and experience, the CAD technicians, can expect: Hours of work: Monday to Thursday: 8am – 5pm, finishing at 4.30pm on Fridays. Holidays: Up to 34 inc. over 5 years (20 days plus your birthday, plus bank holidays and an additional day for every completed 12 mths of the holiday calendar year, up to a maximum of 25 Days). Extras: Regular company social events, including a summer BBQ, Christmas brunch etc. Access to an Employee Assistance Programme for confidential support and wellbeing advice. Discounted gym memberships to support health and wellbeing. Death in Service cover. Free on-site parking. Travail Employment Group is operating as an employment agency

Salary: £50,000 - £55,000 (negotiable depending on experience) per annum + travel expenses Hours: 42.5 hours per week | Monday to Friday Location: Doncaster (predominantly office-based) with regular travel to London Benefits: 31 days holiday including public holidays - Additional 1 day's holiday per year after 2 years' service (up to 5 additional days) Basic health insurance after successful completion of probation On-site parking Flexible start and finish times within office hours Six-month probation periodThe Opportunity We are recruiting on behalf of a well-established and growing construction subcontractor that delivers high-quality packages on major commercial fit-out and refurbishment projects across London. This newly created Pre‑Construction / Bid Manager position plays a critical role in owning the front end of the project lifecycle. The successful candidate will take full responsibility for bid leadership, cost control and proposal development - freeing up senior management while significantly influencing profitability and project success. This is a hands-on, fast-paced and reactive role, ideal for someone who enjoys problem-solving, value engineering and working closely with clients, suppliers and internal teams. The Role You will lead and manage the bid and pre‑construction process from enquiry through to submission, ensuring projects are priced accurately, competitively and intelligently. Key responsibilities include: Owning and leading the full bid process from initial enquiry to final submission Working closely with Sales, Business Development and Estimating teams to secure new work Breaking down RFPs, drawings and specifications with accuracy and attention to detail Developing clear, robust and defensible cost plans and budgets Managing supplier and subcontractor pricing, including bid levelling and comparisons Identifying commercial and technical risk early and mitigating potential cost exposure Driving value engineering opportunities to improve margin and competitiveness Attending client meetings to develop designs, specifications and budgets Arranging and coordinating pre‑sale samples, finishes and ironmongery options Managing short turnaround times while maintaining accuracy and qualityAbout You This role requires a technically strong, commercially astute individual who is comfortable taking ownership and accountability. You are likely to bring: Proven experience in estimating, pre‑construction or bid management within construction Strong understanding of commercial construction methods and subcontract environments Excellent financial awareness with sound cost control discipline Ability to work quickly without compromising attention to detail High levels of organisation, accountability and self‑motivation Strong IT skills, particularly Microsoft Excel and the wider Office 365 suite Confident written and verbal communication skills A proactive, solutions-focused and "can-do" mindsetExperience within joinery, doorsets or fire door compliance would be highly advantageous, but is not essential for someone with strong transferable pre‑construction experience and a technical mindset. 2D CAD capability would be beneficial, but not required. Culture & Working Environment This is a quiet, focused and professional office environment, suited to individuals who are comfortable working independently, managing pressure and taking responsibility. The business operates on teamwork, precision and reliability, with a strong emphasis on doing things properly and on time. The role is mainly office-based in Doncaster, with regular travel to London (approximately three times per month or more as required) to support client and project activity. If you're a commercially driven pre‑construction professional looking to take ownership of bids and shape project success from the very start, we'd welcome a confidential discussion. IND25

GC/MS Analytical Chemist Type: Permanent Location: Doncaster Hours: Days: (Mon- Friday) Salary: £30-35,000 depending on experience Our Client, a growing - national testing company, is looking to recruit an experienced GC Chemist to work at their modern site in Doncaster. The successful person is likely to get rapid career progression as the lab is in it's infancy (increased service offering). The Person: The preparation, analysis, interpretation and quantification of organic contaminant using GC-FID/ GC-MS • Maintaining an up to date knowledge of new testing techniques within the market. • To develop analytical method development as necessary, identifying opportunities to improve runtime & quality & detection limits. • Preparation of samples may require solvent extraction techniques such as SPE. • Interpretation and quantification of organic compounds using relevant software on PC; • Analysis of samples using GC/MS-FID using relevant software and instrumentation. • Responsibility for instrumentation, general , preventative and advance maintenance and performance and trend monitoring of the instruments carried out. • Analysing samples and be able to perform maintenance and trouble shooting. • Ability to recognise problems and take corrective action. The Person: Will hold a degree in a relevant - Chemistry based field • Experience of working within GC-MS - essential; • Experience of method development - Desirable • Experience of UKAS assessments - Highly Desirable • Proven industry experience as a GCMS Analyst for a sufficient period of time - essential; • Excellent attention to detail and be able to prioritise work to specified deadlines; • Good communicator Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Quantity Surveyor/Senior Quantity Surveyor Doncaster Up to £65,000 plus Car/Car Allowance (£4,700) Are you a driven Senior Quantity Surveyor looking for a role where you can make a real impact in your local area? An established and respected contractor is seeking a commercially astute professional to support the delivery of multiple framework projects in Doncaster, working closely with the local authority on schemes valued up to £1m. This is a fantastic opportunity to take on a hands-on, site-based role, where you’ll have real influence over project performance, client relationships, and team development—while contributing to meaningful community infrastructure. What You’ll Be Doing Leading commercial activities across the full project lifecycle, from procurement to final account Managing subcontract packages, tender evaluations, and contract administration Driving cost control, forecasting, and detailed financial reporting Maximising cash flow through accurate valuations and timely invoicing Monitoring project performance to meet—and exceed—financial targets Identifying and managing risks, opportunities, and change control processes Ensuring contractual compliance and maintaining robust project records Supporting sustainability and carbon reduction objectives Mentoring and developing junior team members What We’re Looking For Proven experience as a Quantity Surveyor or Senior Quantity Surveyor within construction Strong working knowledge of NEC contracts, procurement, and commercial reporting Ideally degree qualified with 6+ years’ experience Excellent negotiation and stakeholder management skills Ability to work closely with delivery teams in a site-based environment Experience within highways or civil engineering projects is highly desirable Why Apply? Work on local projects that directly benefit the Doncaster community Join a stable and growing business with a strong pipeline of framework work Take on a visible, influential role with real autonomy Excellent salary, benefits, and long-term career prospects If you’re looking for a role where you can combine commercial expertise with meaningful project delivery this is a great next step

Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing products. Part of the Genuit Group, we combine long-term stability with a culture built on teamwork, accountability and continuous improvement. We encourage fresh ideas, invest in development and are committed to creating a safe, inclusive and supportive workplace where everyone feels like they belong. Role Overview: The Site Services Electrician supports all functions within the Site Services team, carrying out both planned maintenance and reactive maintenance activities. The role is responsible for maintaining high standards of HSE compliance and ensuring exemplary housekeeping across all work areas. Key Responsibilities: * Perform breakdown diagnostics, repairs, planned and corrective maintenance, inspection, verification and associated administrative duties * Involvement and leading focused improvement initiatives * Carry out remedial repairs as defined by TPM requirements * Utilisation of Permit to Work, risk assessment and COSHH information/procedures * Respond promptly and effectively to equipment breakdowns to minimise downtime * Enter maintenance and operational data accurately into relevant systems * To perform clerical and housekeeping duties as needed * Ensures strict compliance with company Health & Safety procedures * Performs miscellaneous job-related duties as assigned * Dealing with Contractors working on site Skills & Requirements: * Time served/ Apprentice Electrical Engineer, C&G standard and minimum NVQ Level 3 * Ability to work independently and be able to test and inspect * Ability to understand and follow specific drawings, instructions and procedures * Ability to diagnose faults on hydraulic and pneumatic systems or fixed wiring, PLC and Drive systems * Ability to recognise equipment anomalies * Practical knowledge of IEEE guidelines * Practical knowledge of LOLER and PUWER regulations * Demonstrate core company values (Our Ways of Working) * Perform any other duties as appropriate within skills/competency level * Maintain timekeeping and housekeeping * Industrial experience highly desirable * Manual handling and welding skills Workings Hours & Benefits: * Monday to Friday, 08:00 - 16:30 * Contributory pension scheme - matched up to 8% & Life Assurance * Enhanced Maternity & Paternity pay * Save as you earn Sharesave & Cycle to work Scheme * Various health & wellbeing initiatives including complimentary occupational health on-site physiotherapy and counselling services * Staff discount on all Genuit Group products * Free on-site parking

KS1 Class Teacher - Doncaster Are you a passionate and dedicated KS1 Class Teacher looking for flexible teaching opportunities in Doncaster? Academics are recruiting KS1 Class Teachers to support a range of welcoming primary schools across Doncaster on a temporary, ongoing supply basis. Position: KS1 Class Teacher Location: Doncaster, South Yorkshire Contract: Temporary, flexible ongoing supply Pay: £130 - £190 per day (paid via PAYE - no umbrella company fees) Start Date: ASAP or a start date that works for you About the Role As a KS1 Class Teacher in Doncaster, you will deliver engaging lessons across Year 1 and Year 2, supporting pupils in their early stages of learning and development. This KS1 Class Teacher role in Doncaster offers flexibility and the chance to gain experience across a variety of Doncaster primary schools. You may be required to cover both short-term and longer-term placements depending on school needs. Key Responsibilities Plan and deliver engaging KS1 lessons * Support early literacy and numeracy development * Maintain a positive and structured classroom environment * Adapt lessons to meet individual needs * Follow safeguarding and behaviour policies * Work collaboratively with teaching assistants and staff Candidate Requirements Qualified Teacher Status (QTS) * Experience teaching within KS1 * Strong classroom management skills * Flexible and adaptable approach * Enhanced DBS (or willingness to apply) What Academics Offer Flexible KS1 Class Teacher roles across Doncaster * Competitive daily pay between £130 - £190 * Opportunities across a range of Doncaster primary schools * Ongoing consultant support We also offer: Flexibility - we offer all of our candidates the opportunity to choose the days and where they work, allowing them to commit fully to their life outside of the classroom. ASAP start, or a start date that works for you. Additional support from our dedicated staff throughout all of your placements. Temp to perm contracts (if you are looking for a permanent role). Refer a friend scheme that allows you to earn up to £125 of Love2Shop vouchers for every education professional you refer to us. If you are a motivated KS1 Class Teacher in Doncaster, apply today to join Academics. TPBN1_UKTJ

Seasonal Chef - Residential Activity Centre - Doncaster, Yorkshire - £14.26 per hour - Live-in available Full-time fixed-term contract from March to October, working 5 days out of 7 with a mix of early and late shifts. We're recruiting a Seasonal Chef to join the catering team at a busy residential outdoor activity centre near Doncaster in South Yorkshire. The centre welcomes children and young people from across the UK for multi-day residential stays packed with outdoor adventure, teamwork and activity-based learning. Working as part of a friendly kitchen team, you'll prepare and deliver nutritious, high-quality meals that fuel busy, active days - from early breakfasts before activities to evening meals after full days outdoors. This is a full-time seasonal role running from March to October, offering the chance to work in a unique outdoor setting with live-in accommodation available if required. What's in it for you? * £14.26 per hour * Full-time seasonal contract from March to October * Live-in accommodation available if required * Working 5 days out of 7 with a mix of early and late shifts * Generous holiday allowance, including bank holidays and an extra day off for your birthday * Option to purchase additional annual leave and take paid volunteering days * Ongoing training, mentoring and opportunities to develop your skills * Opportunities to work across other UK or European locations * 24/7 wellbeing and mental health support, including an Employee Assistance Programme * Contributory pension scheme and family-friendly policies * Financial wellbeing tools allowing you to save or borrow directly from your salary * Free or heavily discounted family breaks, plus discounts at over 800 retailers Key Responsibilities * Prepare and serve nutritious, well-balanced meals for children, staff and visitors * Cater for medical, dietary and allergen requirements with care and attention * Maintain excellent food safety, hygiene, HACCP and health & safety standards * Support the organisation and day-to-day running of the kitchen * Work efficiently within a busy, high-volume catering environment * Assist with wider centre duties within a residential activity setting What we're looking for * Previous experience as a Cook or Chef in a busy catering environment * Good knowledge of food hygiene, allergen control and dietary requirements * Ability to stay organised and work calmly under pressure * A flexible, team-focused approach to working early and late shifts * Level 3 Food Safety qualification (desirable but not essential) If you're looking for a seasonal Chef role in Doncaster, Yorkshire, offering great team culture, development opportunities and the chance to work in a unique outdoor environment, please apply now. Job Number INDCATERERING 935387 Location Doncaster, Yorkshire Role Chef Platinum Recruitment is acting as an Employment Business in relation to this vacancy. TPBN1_UKCT

Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing products. Part of the Genuit Group, we combine long-term stability with a culture built on teamwork, accountability and continuous improvement. We encourage fresh ideas, invest in development and are committed to creating a safe, inclusive and supportive workplace where everyone feels like they belong. Role Overview: The purpose of the role is to carry out tool changes and insert changes within the extrusion moulding department to maintain optimum production, whilst being fully compliant to all corporate and legislative standards and guidelines. Key Responsibilities: Set tools in various machines and achieve high quality parts at the optimum cycle time Carry out scheduled tool changes quickly, efficiently, and effectively to minimise changeover times and machine downtime adhering to standards set out by setting sheets Ensure the production plans are met on time and in full at the required cost and quality levels Ensure that first and last offs meet both visual and dimensional specifications and are to out guidelines Monitoring cycle times against target cycle times on a regular basis, ensuring deviations are identified and rectified in a timely manner Work with training coordinator to ensure knowledge, training and development is passed onto relevant new starts or apprentices Ensure all relevant data is captured and entered onto appropriate systems (e.g. scrap, production outputs, tooling problems, downtime, material reconciliation, quality issues etc) Conducting material and colour changes as dictated by the production schedule, including replenishing raw materials Setting and adjusting 3 axis and 6 axis robots to remove the mouldings efficiently from the mould tools Fault finding and rectifying injection moulding processing problems in a timely manner to maintain quality and minimise scrap levels Ensure all waste products are separated into their designated containers for safe disposal Assisting with injection mould tooling maintenance as required Understand safe working practices within a manufacturing environment and maintain a safe working environment & Ensure a programme of continuous improvement in all activities Skills & Requirements: A knowledge and understanding of injection Moulding machines. Ability to set up moulding machine using setting sheet as a starting guide, removal of outgoing tool and insertion of new tool To be able to obtain first off sample for dimensional and physical testing & Ability to understand and use all workshop machinery How to use an overhead crane safely and correctly, and the correct safe use of lifting equipment To be able to conduct quality checks for visual, dimensional and stress testing Knowledge of Health and Safety and Environmental standards for self and others Demonstrates the potential for problem-solving, critical thinking, and analytical skills, and who are willing to engage in practical tasks and projects to develop their skills Strong commitment to continuous improvement and sustainability practices & Proficient in Microsfot Office Can demonstrate the Genuit Group Trademark behaviours: “We work together”, “We take ownership” & “We find a better way” Workings Hours & Benefits: Working 3 on 2 off, 2 on 3 Days & Night rotating shift 06:00am - 18:00 & 18:00 - 06:00am Contributory pension scheme - matched up to 8% & Life Assurance Enhanced Maternity & Paternity pay Save as you earn Sharesave Scheme & Cycle to work scheme Various health & wellbeing initiatives including complimentary occupational health on-site physiotherapy and counselling services. Staff discount on all Genuit Group products

Resident Pump Engineer - Depot Based Location: Doncaster Salary: £37,000 - £45,000 Basic (depending on experience) Permanent, Full Time About the Company Our client is a leading specialist hire provider of pumping, heating and cooling solutions across the UK and Ireland. With a strong national depot network and a 24/7 service capability, they support customers with both planned projects and emergency response solutions across a wide range of industries including construction, utilities, facilities management and industrial sectors. The Role Based from the Doncaster depot, this is a hands-on, workshop-based role focused on the inspection, service, repair and preparation of pumping equipment. You'll play a key role in ensuring all equipment returned from site is quickly turned around, fully operational, and ready for the next hire. This role is ideal for an engineer who prefers a stable depot environment while still working on a varied range of equipment. Key Responsibilities Inspect, service and repair returned pump equipment and associated systems Carry out fault-finding on mechanical and basic electrical issues Prepare and test equipment prior to hire, ensuring it is fully operational Refurbish and maintain diesel and electric pump units, including submersible pumps Accurately complete service records and job reports Support general depot operations including equipment movement and organisation Maintain a safe working environment in line with health & safety procedures What We're Looking For Experience as a Pump Engineer, Service Engineer or similar mechanical role Strong mechanical knowledge (essential) Experience with pumps, plant, generators or similar equipment Ideally experience working on diesel engines and associated systems Fault-finding and diagnostic skills A hands-on, proactive approach with good attention to detail Ability to work independently within a depot environment Full UK driving licence (preferred) Desirable: Experience within the hire industry Basic electrical knowledge Forklift (FLT) licence What's on Offer £37,000 - £45,000 basic salary (depending on experience) Overtime opportunities available Ongoing training and development Stable, long-term career opportunity Progression into senior or field-based engineering roles Why Apply? This is a great opportunity for an experienced engineer looking to step away from field work or secure a more structured, depot-based role. You'll be working on a wide range of equipment in a busy, well-supported environment, with clear opportunities to progress your career. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Fabricator Trainer Location: Doncaster, UK Are you an experienced fabricator looking to take the next step in your career? We're looking for a skilled and motivated Fabricator Trainer to join a growing team, delivering hands-on training and supporting high-quality fabrication standards across a range of aluminium systems. This is a fantastic opportunity to combine your technical expertise with training and development, working in a collaborative environment where your knowledge will directly support both internal teams and external partners. The Role As a Fabricator Trainer, you will play a key role in delivering practical training in the fabrication and installation of aluminium windows, doors, and curtain walling systems. Training will be delivered in a workshop environment, on customer premises, and on-site as required. You'll help ensure fabricators are confident, capable, and working to the highest standards of quality and performance. Key responsibilities include: Delivering hands-on training to new and existing fabricators Reviewing and verifying product manuals, suggesting improvements for efficient fabrication Visiting sites to investigate faults, identify root causes, and produce detailed reports Conducting on-site toolbox talks on installation best practices Producing high-quality product samples for testing and supporting test activities Ensuring testing procedures are followed and analysing outcomes About You We're looking for someone with strong fabrication experience and a passion for sharing knowledge. You will have: A full clean driving licence and willingness to travel, including overnight stays Strong communication skills across workshop, office, and installation teams In-depth knowledge of fabrication processes for aluminium systems Ability to read and interpret technical drawings and cutting/assembly sheets Good understanding of product manuals and fabrication stages Basic IT skills (e.g. Microsoft Word and PowerPoint) What's on Offer Competitive salary and incentive schemes Ongoing training and career development opportunities Flexible holiday options Cycle to Work scheme Company pension Employee benefits and discount platform Wellbeing and recognition programmes

HRGO Recruitment - Recruitment Consultant, Doncaster Your Mission As a Recruitment Consultant, your primary mission is to lead the recruitment process with a strategic focus on sales and business development, driving tangible and measurable results through effective networking and communication with both internal and external stakeholders. In this role, you will leverage your assertiveness and efficiency to consistently exceed performance targets. Your ability to negotiate at high levels, sell innovative concepts, and cultivate long-term relationships with clients is paramount. You will excel in dynamic environments, demonstrating initiative and sound business judgement to align with the Company's goals and growth strategies. The ideal candidate will be self-motivated, enthusiastic, and possess a positive disposition, showcasing adaptability, competitiveness, and a keen sense for identifying and capitalising on business opportunities. We'd like to hear from you if you embody the following in any discipline: Comprehensive understanding of the recruitment sales cycle, with a proven track record in formulating and implementing sector-specific sales strategies Exceptional interpersonal skills, particularly in communication, persuasion, and presentations Excellent organisational skills for both personal and team initiatives Robust analytical and problem-solving capabilities Significant experience working within the recruitment sector Proficiency in Microsoft Office, database management, and internet tools Flexibility to work collaboratively within a team and communicate effectivelyKey Responsibilities and Accountability's As a Recruitment Consultant in our Doncaster branch, you will: Meet and exceed gross profit (GP) targets for Permanent / Temporary recruitment in line with established performance standards. Identify potential clients and convert those prospects into business opportunities, effectively filling roles and servicing clients while expanding your desk in accordance with targets set by your Line Manager. Spearhead business development initiatives to consistently grow and safeguard margins across Temporary and Permanent revenues, focusing on local branch-generated business. Actively seek out and respond to opportunities aligned with the Company's strategic objectives: Commit to 'Meeting & Exceeding' personal and team financial targets 'Identify & Win' new local business opportunities 'Retain & Increase' margin-generating opportunities within the existing customer base Ensure the sustainability of your local businessYou will ensure that all colleagues, clients, and candidates are treated with dignity and respect at all times, upholding the Company's vision, values, and aspirations. Your commitment to achieving agreed-upon targets will be pivotal to your success. Our Purpose: To deliver the market-leading recruitment experience to candidates and talent to our customers. To raise the bar of what can be expected of recruiters in transparency and service. Our Vision: HRGO Recruitment will become the UK's leading talent organisation by creating the best experience for clients and Candidates through developing industry-leading consultants and innovative technology. Our Values: Candidate experience Collaborative Partnerships Transparency Relentless innovation Human centredAbout Us At HR GO, we raise the bar for the recruitment industry. We deliver an outstanding experience with honesty and integrity to people finding work and searching for talent. Our people's expertise leads the industry, equipped with the best technology. We respect and care for our people and customers. HR GO is the envy of our competitors; we're constantly innovating to stay ahead. A positive, can-do attitude is essential; our people get things done and are passionate about what they do. But perhaps most important of all, we enjoy what we do - so we have a lot of fun too! We believe a healthy culture, strong values and contributions from a diverse range of individuals help us succeed. Some members of HR GO have been developing and growing with us for many years, and we recognise this achievement with Long Service Awards. At HR GO, we believe in rewarding our employees with a wide range of rewards and benefits: Perks and Benefits Onboarding Training Progression and developmental opportunities within the company. Competitive Commission Scheme (for those eligible). 33 days of holiday (including 8 bank holidays) Including Life Cover x 3 salary. Health Cash Plan. Birthday off (in addition to your allocated annual leave). Long Service Awards. Annual Conference. Salary Sacrifice Schemes Volunteers Day. Refer a Friend Scheme. Discounts and savings for a range of different retailers. Holiday Buy & Sell SchemeWe do not discriminate based on race, ethnicity, gender, ancestry, national origin, religion, sex, sexual orientation, gender identity, age, disability, veteran status, genetic information, marital status or any other legally protected status. As users of the Disability Confident Scheme (Level 2), we guarantee to be inclusive to all disabled applicants who meet the minimum criteria for any advertised vacancies with HRGO Recruitment

Resident Pump Engineer - Depot Based Location: Doncaster Salary: £37,000 - £45,000 Basic (depending on experience) Permanent, Full Time About the Company Our client is a leading specialist hire provider of pumping, heating and cooling solutions across the UK and Ireland. With a strong national depot network and a 24/7 service capability, they support customers with both planned projects and emergency response solutions across a wide range of industries including construction, utilities, facilities management and industrial sectors. The Role Based from the Doncaster depot, this is a hands-on, workshop-based role focused on the inspection, service, repair and preparation of pumping equipment. You'll play a key role in ensuring all equipment returned from site is quickly turned around, fully operational, and ready for the next hire. This role is ideal for an engineer who prefers a stable depot environment while still working on a varied range of equipment. Key Responsibilities Inspect, service and repair returned pump equipment and associated systems Carry out fault-finding on mechanical and basic electrical issues Prepare and test equipment prior to hire, ensuring it is fully operational Refurbish and maintain diesel and electric pump units, including submersible pumps Accurately complete service records and job reports Support general depot operations including equipment movement and organisation Maintain a safe working environment in line with health & safety procedures What We're Looking For Experience as a Pump Engineer, Service Engineer or similar mechanical role Strong mechanical knowledge (essential) Experience with pumps, plant, generators or similar equipment Ideally experience working on diesel engines and associated systems Fault-finding and diagnostic skills A hands-on, proactive approach with good attention to detail Ability to work independently within a depot environment Full UK driving licence (preferred) Desirable: Experience within the hire industry Basic electrical knowledge Forklift (FLT) licence What's on Offer £37,000 - £45,000 basic salary (depending on experience) Overtime opportunities available Ongoing training and development Stable, long-term career opportunity Progression into senior or field-based engineering roles Why Apply? This is a great opportunity for an experienced engineer looking to step away from field work or secure a more structured, depot-based role. You'll be working on a wide range of equipment in a busy, well-supported environment, with clear opportunities to progress your career. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business. TPBN1_UKTJ

Senior Customer Development Manager E-Commerce EMEA. Senior Customer Development Manager. The Customer Development Team are responsible for partnering with our retail, pharmacy, eCommerce and wholesale customers, in order to deliver Kenvue’s strategies and initiatives to profitably grow.

Learning & Development Partner. As Learning & Development Partner, you will act as the strategic owner of learning within your region, partnering with Operations Directors, Regional Service Directors and local leadership teams to deliver impactful, future-focused learning solutions. Feeding regional

Head of Sales, Marketing & Development (Maternity Cover) Woking Theatres & Cinema. Head of Sales, Marketing and Development (Maternity Cover) Woking Theatres & Cinema. Community & Network Development.

In this senior role, you will provide strategic leadership across Development Management and Planning Enforcement, playing a key role in supporting the borough’s growth and regeneration. You will ensure that development is delivered in line with the Council’s Local Plan and wider corporate prior

I'm currently partnering with a well-established, multi-disciplinary property and development consultancy looking to appoint a Principal Planning & Development Consultant to strengthen and grow their presence in Hereford. Principal Planning & Development Consultant. You'll take ownership of

Play a key role in the wider management team, contributing to strategic decision-making and service development. Present reports and provide professional advice at Planning Committee, deputising for the Head of Development Management where required. I am working with Numerous Local Authorities acros

Director of Research Development (Project-Based Collaboration).

Working closely with a skilled Business Development team, you’ll shape profitable, de‑risked, and distinctive solutions, all while joining a culture where your expertise is valued and your career can accelerate quickly. Collaborate with Business Development and Capture teams to develop winning t

Process Engineer – Process Development, Piloting & Scale-Up. This role is ideal for a chemical engineer who enjoys taking process concepts from early development through to pilot and small-scale production.

We're building Hyphen's AI unit from scratch.You'll set the technical foundations — the architecture, the standards, the way we build — across a portfolio of global education companies.Everything that comes after depends on getting this right.Hyphen is a portfolio of global education companies s

Our international client is currently searching for a Product Development Engineering Manager to direct the semiconductor new product development team from product definition through to high volume implementation. Required skills for the Product Development Engineering Manager will include:. Strong

Provide coaching and developmental feedback to facilitators and trainers. CIPD Level 5 in Learning & Development (or equivalent). Learning & Development Partner.

Remember to check your CV before applying Also, ensure you read through all the requirements related to this role.Full Time | Permanent | 11-month annualised contract | 5 days out of 7| Rotherham.A Unique Opportunity to Shape the Future of a Landmark Heritage Project.We are working in partnership wi

Business Development Underwriter Personal Lines Location Remote with travel to London & Broker visits Salary Up to £70,000 for the right person IPS Group are working with a rapidly growing Insurer to bring in a Business Development Underwriter. You will contribute to the strategic growth of the

Are you a dynamic Business Development Manager looking to make a significant impact in the enterprise software industry? Our client, a leading provider of enterprise software solutions primarily serving the public sector, is seeking a talented individual to drive sales and expand their market presen

Learning and Development Trainer.

A fantastic Business Development Representative opportunity has become available to work at our head office in Thorne, with fabulous benefits.

Internal Business Development Manager Salary: £30,000 – £35,000 per annum Location: Alton, Hampshire ? Hours: Monday to Friday, 7:30am – 5:00pm Interviewing: Immediately (Experience within construction, engineering, form-work, or temporary works sectors is desirable. Our culture is built aroun

Audio Visual Business Development Manager Brief Overview of Role: My client is a rapidly expanding Audio-Visual integrator, and they are looking for an experienced AV sales professional to work from their IP20 offices Responsible for scoping, selling & preparing audio visual and collaborative soluti

Trainee Cyber Security Course Programme – Job Guarantee Included Complete online training designed to take you from zero experience to your first Cyber Security role.Study part-time, build fundamental skills, and get dedicated job placement support until you're hired.Flexible financing options av

Job Description Business Development Manager Salary: Circa £50,000/£55,000 + Commission (flexible for the right candidate) Location: Scunthorpe | Hybrid (office & remote working) This is a new business hunter role. If you thrive on generating sales from scratch and turning prospects into loyal

Job Description Business Development Executive (Entry-Level) Location: S63 (Office-based) Hours: Full-time Sector: Health & Social Care Salary: Competitive salary, commensurate with experience, qualifications, and training About the Role We are looking for a motivated and people-focused individu

Field Service Engineer - Mechanical & Electrical (Machine Tools) Location: UK-wide (ideally within 1 hour of Sheffield or Redditch) Salary: £40,000-£45,000 + Overtime (OTE £50,000+) Package: Company van, pension, 25 days holiday + stats, door-to-door pay, early Friday finish Were supporting

Key responsibilities include: Supporting development activities across a range of projects Assisting with trials and product testing Preparing samples and maintaining accurate records Supporting the wider R&D team with day-to-day development tasks The ideal candidate will have: An interest in food d

Are you passionate about helping people with learning disabilities, autism and mental health issues to live gloriously ordinary lives?Do you have a background and in-depth experience of People & Organisational Development activities and best practice in HR?

Our client is currently recruiting a talented Sales Development Manager who will drive profitable growth by acquiring new business, strengthening and developing customer relationships, and supporting the commercial strategy through technical sales expertise.