Trabajos produce en RedditchCrear alertas

FOSTER CARE ASSOCIATES (THE FCA) Role: Senior/Supervising Social Worker - Full time - Permanent Basic Salary: Up to £34,324.62 per annum dependent on experience Benefits: Company Car or £2,000 Car Allowance, 30 days' Annual Leave, rising to 35 day's with length of service, + Bank Holidays, Life Assurance, Employee Discount Scheme, Company Pension & Medical Cash Plan Location: Homebased The location of the team is in Worcestershire, supporting our Foster Parents across Birmingham, Dudley, Walsall and Sandwell. Occasional travel to Bromsgrove and surrounding areas of West Midlands also required. ABOUT US Set up by a former foster parent and former social worker in 1994, Foster Care Associates (FCA) is an established fostering agency which forms part of the Polaris Community - one of the UK's largest leading communities of children's service providers. The business was born out of an enthusiasm for delivering fostering services to make a positive difference to the lives of looked after children. Our first office was in the Worcestershire countryside, and that's still where our Head Office is today. We've come a long way since those early days and, over the years, FCA has built a strong reputation for excellence, and now offers a wide range of services to children and families. But our purpose remains the same; 'to make a positive and lasting difference for children, families and communities', and it's underpinned by a series of values designed to help us assist children and young people to reach their full potential. Today, we're one of the country's largest and most experienced independent fostering agencies. But just because we're large doesn't mean we're impersonal. At FCA we're one big family, and we're committed to supporting every single child and foster parent, every single minute of the day. DUTIES WILL INCLUDE: • Support foster parents and their families to achieve outstanding outcomes for all children and young people in foster care., • Support and monitor the continued suitability and competence of Foster parents ensuring they provide a safe, healthy, nurturing and learning environment for children/young people., • Ensure that carers fully understand the fostering task, competencies to be achieved and the standards expected, including complaints and representation procedures as detailed in the FCA policies and procedures., • Provide and record regular supervision to allocated foster parents in line with FCA's Operational Standards., • Work in partnership in a team parenting approach to help identify any needs within the foster family e.g. respite, activities, therapy, holidays, with all members of the child's network, including contributing to all relevant meetings and any other tasks defined., • Ensure each child and foster parent are fully compliant in respect of all key documentation., • Attend meetings and/or provide reports for Commissioning Teams to address individual packages of care., • Promote participation of children/young people in the development of the agency and in accessing resources and opportunities in their local community., • Participate in an 'out of hours' support service on a rota basis, • Undertake occasional initial home visits and Form F Assessments. YOU MUST HAVE: • A Social Work qualification, • Professional registration with Social Work England or equivalent, • Proven ability to produce a high standard of report writing, • A comprehensive working knowledge of relevant legislation and child safeguarding procedures, • The willingness and ability to travel extensively (including occasional nights away), • Confidence with transporting children and young people in sometimes stressful/difficult situations To be considered, please apply and we will be in touch. No agencies please. The FCA is an equal opportunities employer and has been awarded the disability confident employer by the jobcentre plus. The successful applicant will be subject to a DBS check at enhanced level if successful for the position. PandoLogic. Category:Social Services, Keywords:Adoption Social Worker, Location:Bromsgrove, ENG-B60 2BQ

About the Role: We are seeking an experienced MIG Welder to join a busy and well-established manufacturing team. This is a fantastic opportunity for someone with strong welding experience looking for long-term, stable work and great hours. Hours: 7am-3:30pm Monday to Thursday/ 7am-1:30pm Friday Pay rate: £14.50-£15.00 per hour Contract: Temporary to Permanent Key Responsibilities: • MIG welding on mild steel components, • Working from engineering drawings, • Fabrication tasks as required, • Maintaining quality and safety standards, • Keeping the working area clean and organisedRequirements:, • Previous experience as a MIG Welder (mild steel essential), • Ability to read and work from technical drawings, • Strong attention to detail and ability to produce quality finishes ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.

Your new companyAre you a tech-savvy problem solver who loves improving systems, supporting people, and making technology work smarter for a growing business? This organisation is looking for an IT Support Technician who wants to be part of a modernising, innovative, and values-driven organisation helping them accelerate their journey of digital transformation, automation, and business growth. They are more than just an engineering and manufacturing business; they're a corporate family. They take pride in delivering quality, supporting each other, and constantly improving. You'll work closely with the UK teams and our Group IT department in Germany, supporting all technology across the business and helping shape the systems of tomorrow.Your new roleAs the IT Support Technician, you will play a key part in maintaining and developing the entire UK technology stack. You'll support end-users, help deliver critical IT and business projects, and ensure all our systems remain secure, reliable, and future-ready.You'll be involved in everything from daily technical support to major digital initiatives, including SAP rollouts, cloud migrations, IoT automation, fleet systems, and much more.Technical Support & Operations • Provide deskside and remote support across all UK sites, • Maintain servers, operating systems, security tools, hardware, and mobile devices, • Assist with backups, business continuity, access management and licence renewals, • Produce clear training content, including video-based process guides, • Support SAP Business One implementation for new acquisitions, • Assist with cloud migrations and infrastructure transitions, • Help deliver new digital systems, including fleet software, AP automation, e-signing and expenses tools, • Audit systems and processes to identify risks and opportunities, • Suggest and support new technologies that improve efficiency, • Strong interest and knowledge in:Servers & virtualisation, Microsoft technologies, networking (access, core & edge), ERP/CRM systems, backups & recovery, monitoring tools, hardware support, • Excellent communication skills and a friendly, customer-first attitude, • Logical, analytical thinker with strong problem-solving skills, • High attention to detail and pride in delivering quality work, • A collaborative team player with the confidence to ask for support when needed, • Ability to prioritise workload and provide regular updates to stakeholders, • Experience working in a similar technical support environment, • Project management knowledge, • A supportive, family-oriented working culture, • Opportunities for growth, development and training, • Involvement in modern digitalisation initiatives Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

CAD Technician Bromsgrove Competitive Salary Our client is a specialist engineering company delivering high-quality mechanical and electrical systems across a wide range of sectors, including manufacturing, construction, and service industries. Due to continued growth, they are looking for a talented CAD Technician to join their dynamic team. This is an exciting opportunity to play a key role in transforming engineering concepts into detailed technical designs, while supporting innovative projects from initial concept through to final delivery. As a CAD Technician, you will work closely with engineers, clients, and project teams to develop accurate and detailed technical drawings. You will be responsible for managing design projects and ensuring all specifications are translated into high-quality CAD outputs. CAD Technician Responsibilities • Gather and interpret technical engineering specifications from clients, • Produce detailed engineering drawings using AutoCAD and Revit, • Manage design projects from initial concept through to delivery, • Provide technical support to clients and the wider engineering team, • Previous experience as a CAD Technician or similar role, • Strong proficiency in AutoCAD and Revit, • Experience managing design projects from concept to completion, • Industry experience within construction, manufacturing, or service sectors (advantageous), • Excellent communication and teamwork skills Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Graduate Product Design Engineer Redditch (Office based) c£30,000 Interested in starting a career in Lighting Product Design? Why not do it with one of the best Manufacturers in the business! We are looking for a Graduate Product Design Engineer to join an established Product Development team. This is an excellent opportunity for a recent graduate or someone with 1–2 years’ experience to develop a real career within a hands-on manufacturing environment. Key Responsibilities • Support product development from concept to production, • Conduct research and competitor analysis, • Produce and maintain CAD drawings, assemblies, and PDM files, • Prepare BOMs and manufacturing documentation, • Assist with fault finding and continuous improvement of designs and assembly methods, • Degree qualified or early-career design engineer, • Proficient in SolidWorks, PDM, and technical drawings, • Knowledge of manufacturing processes (machining, injection moulding, aluminium extrusion) Interested? Click to apply!

Job Title: Tig Welder (Stainless Steel & Aluminium) Hours of work: 40hrs per week Mon-Fri (Overtime available based on production demand) Monday – Thursday 7:30am – 4:30pm and Fridays 7:30am – 1:30pm JOB FUNCTIONS The Tig Welder will be based with the Welding team, you will work closely with the Welding Coordinator, and the Quality department. The Tig Welder must be experienced in working with aluminium and stainless steel, and have worked in a manufacturing and fabrication environment. • Minimum of 2 years’ experience in TIG welding, • Working from engineering drawings, • Knowledge of TIG welding and able to work to strict daily manufacturing targets, • Welding Aluminium and/or stainless, • Working on your own predominantly, upholding high standards of quality, • Working in line with our Quality standards, • Previous experience of welding to 9606-1 & 9606-2 (desirable) In order to be considered for this role, all applicants must have the following attributes, and will be required to do an onsite weld test as part of the interview process. ATTRIBUTES • Flexible proactive approach to Work, • Excellent attention to detail, • Must be able to produce work with minimal flaws, • Understands the importance of quality, • Courteous and professional, • A great team player, • Experience in manufacturing is preferred.

Metallurgist Job ID:40620 7am-3pm Monday to Thursday & 7am – 12pm Friday £45,000 - £47,000 per annum Washford Industrial Estate B98 Redditch Our client is a leading metal component manufacturer supplying to customers globally. The work on site is precision manufacturing working with different processes to produce their finished product. The purpose of the Metallurgist is to manage a small team of Lab Technicians the daily activities of the test laboratory. The Metallurgist will be responsible for the scheduling and testing of WIP, training and certification of lab technicians, maintaining calibration of the test equipment and ensuring requirements are adhered to as defined in our clients internal procedures. You will be leading a team of 4 and will be responsible for scheduling test activity to maintain a standard daily batch output in line with demand which will be typical 12-14 batches per day. Background needed: • Bachelor of Science degree (or equivalent experience) in Metallurgy, Metallurgical Engineering or Material Science (Desired), • Two years’ experience in managing people., • Two years’ experience in mechanical testing., • Capable of interpreting industry standards for test requirements., • Participated in Material Testing Lab audits Key Tasks: • Schedule team activity to maintain daily required batch closure, • Support activities to resolve any NC conditions identified through testing., • Maintain test technician certification, • Identify and deliver training as required to ensure there are sufficient test technicians for each test discipline., • Maintain calibration status of laboratory test equipment, • Manage the calibration activities to ensure that test equipment is valid for testing in line with customer requirements., • Liaise with customers to resolve any identified issues., • Support the Quality Manager with any metallurgical/test information requirements as applicable to any internal/customer queries which may arise., • Work with process owners to develop internal processes/procedures., • Process instructions and procedures are reviewed prior to issuing to ensure that they meet customer and regulatory requirements., • Manage activities within the laboratory team to ensure 5S scores achieve expectations. Benefits • 25 days holiday plus bank holidays, • Competitive Pension scheme (up to 8% matched), • Private health care scheme, • Life Assurance, • Health Cash Plan, • Cycle Scheme, • Discount in gym membership, • Onsite parking Embracing diversity in all its forms, our client is an equal opportunity employer. They welcome individuals from all walks of life, irrespective of race, gender, age, disability, sexual orientation, religion, or belief. By applying through Green Folk Recruitment, you consent to share your information with our client for recruitment purposes. We handle your data with care, aligning with our privacy policy for recruitment-related activities. Please be informed that all final hiring decisions rests solely with our client. Should you have any inquiries, kindly direct them to Green Folk Recruitment for a transparent and streamlined recruitment experience. Green Folk Ltd is acting as a recruitment agency in relation to this vacancy.

Commercial Sales Manager Location: Redditch, Hybrid Logistics, 3pl Excellent salary, car allowance, pension, 25 days holiday, option to buy more. About the Business This business is a well-established and fast-growing provider within the e-commerce, fulfilment, and logistics space, supporting B2B and B2C customers across the UK and internationally. Known for operational excellence, scalable solutions, and strong customer partnerships, the company is focused on continued growth, innovation, and delivering measurable value for its clients. The Role We're looking for a driven Commercial Sales Manager to accelerate growth, win new business, and maximise value from key accounts. This is a hands-on, high-impact role for a confident closer who thrives in fast-paced e-commerce and fulfilment environments. You'll own revenue and profit targets, lead customer relationships end-to-end, and act as a commercial project leader across new and existing accounts. Key Responsibilities Exceed revenue and profit targets across nominated accounts Win new business through proactive prospecting and cold outreach Drive account growth through up-selling, cross-selling, and deeper engagement Own account plans, contracts, SLAs, KPIs, and performance reviews Introduce customers to a full suite of logistics and fulfilment solutions Act as the senior commercial contact for customers Collaborate with internal teams to ensure seamless service delivery Identify efficiency, cost-saving, and improvement opportunities Maintain accurate CRM data and produce weekly sales reports Build strong networks across the e-commerce and logistics sector What You'll Bring Experience Extensive B2B/B2C sales experience in e-commerce, fulfilment, or logistics Proven track record of exceeding revenue and profit targets Strong understanding of carrier networks and e-commerce operations Demonstrable success in new business development and account growth Experience in fast-paced, high-growth environments Skills Excellent negotiation, influencing, and presentation skills Confident managing contracts, KPIs, and commercial forecasts Self-sufficient lead generator with strong pipeline discipline Commercially astute and customer-focused Full clean driving licence Personal Attributes Results-driven closer with high ownership and accountability Proactive, resilient, and highly organised Comfortable leading projects and resolving complex challenges Passion for continuous improvement and customer success Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

About the Business We’re recruiting for a commercially focused Finance Business Partner / FP&A Manager to join a growing logistics business based in Bromsgrove. This is a high-impact role supporting senior stakeholders with forecasting, performance analysis and strategic decision-making, offering super-flexible working with just two days per week in the office. The role is a true mix between business partnering and FP&A. Main Duties: As a Finance Business Partner/FP&A Manager, your main duties include: • Lead the annual budgeting, forecasting, and long-term financial planning cycles., • Oversee weekly and monthly cashflow forecasting, analysis, and reporting., • Build and maintain robust financial models to support strategic and operational decision-making., • Analyse financial performance to identify trends, risks, and growth opportunities., • Partner with stakeholders across the business to ensure financial plans align with overall objectives., • Drive continuous improvement across financial processes, systems, and reporting to enhance accuracy and efficiency., • Produce and present regular financial reporting, including monthly, quarterly, and annual outputs., • Support the development of longer-term financial strategy and planning initiatives., • Undertake ad...

Estimator - Door Systems Division 📍 Redditch 💷 £52,000 basic salary + 4% annual bonus (OTE £55,000) 🕘 Monday to Friday | 8am - 5pm An award-winning and rapidly growing facilities management business, is expanding its Specialist Door Systems Division and is now looking to appoint an experienced Estimator to support continued growth and new contract wins. This is a key commercial role within a technically strong division covering automatic doors, industrial doors, shutters, gates, barriers and loading bay equipment. You'll be joining a business with ambitious plans, a strong internal culture, and a genuine commitment to career development. The Role As Estimator, you'll play a central role in the Secure Door Systems team, producing accurate, timely and commercially sound quotations for a mix of planned works, reactive repairs and small project installations. You'll work closely with engineers, scheduling teams, customers and management to ensure all quotations align with technical requirements, operational capability and commercial objectives. Key Responsibilities Prepare accurate estimates and quotations for automatic doors, shutters, industrial doors, gates, barriers and associated works Review engineer reports, surveys and technical drawings to produce clear, competitive and profitable quotes Act as a key point of contact for engineers, customers and internal stakeholders ...

Overview We are seeking an experienced Electrical Design Engineer to join our growing engineering team. This role focuses on the design of LV electrical installations and control panel schematics, primarily within the water industry, with additional exposure to HVAC and building services projects. You will be responsible for producing high-quality, compliant electrical designs, working closely with project managers, engineers, and clients to deliver practical and cost-effective solutions. Key Responsibilities for the Electrical Design Engineer * Design LV electrical installations in line with industry standards and client specifications * Produce control panel schematics and associated electrical drawings * Develop cable calculations, cable schedules, and load assessments * Prepare electrical schematics, layouts, and documentation * Use Trimble and/or Electrical OM software for design and documentation * Ensure designs comply with WIMES (Water Industry Mechanical & Electrical Specifications) * Support projects within the water industry, with additional involvement in HVAC schemes * Liaise with internal teams, clients, and contractors to resolve technical queries * Review and update designs throughout project lifecycles * Ensure all work complies with BS 7671, relevant standards, and best engineering practice Essential Skills & Experience for the Electrical Design Engineer * Proven ex...

Title: CNC Programmer Milling (Fanuc / CADCAM) Location: Redditch Full Time Permanent Salary: £35,000 In order to make an application, simply read through the following job description and make sure to attach relevant documents. • £45,000 DOE Are you a skilled CNC Milling Programmer with a passion for precision engineering? Were working in partnership with a well-established precision engineering company based in Redditch who are looking to recruit an experienced CNC Milling Programmer with strong CAD/CAM skills to join their growing team. This is an excellent opportunity to take your career to the next level in a high-specification environment producing bespoke parts for the aerospace, defence, motorsport, and prototyping sectors. What You'll Be Doing Programming, setting, and operating 3, 4 & 5-axis CNC milling machines Creating and editing offline programs using CADCAM software ideally ESPRIT, though training can be provided for the right candidate with experience in Hypermill, EdgeCAM, or similar Setting and operating machinery Working from complex engineering drawings to produce components from both metal and plastic Designing fixtures and tooling for bespoke, small-batch, or prototype production Conducting self-inspection using micrometers, calipers, bore gauges, and height gauges Collaborating with the wider engineering team to reduce cycle times and improve process efficiency Supporting maintenance, troubleshooting, and ensuring production quality meets the highest standards What We're Looking For Proven experience in multi-axis CNC milling Offline programming experience using CAD/CAM software (ESPRIT ideal, others welcome) Confident in working with Fanuc controls Background in precision engineering sectors xrnqpay such as aerospace, defence, or motorsport Capable of interpreting technical drawings and producing high-precision components A proactive and quality-driven mindset with good problem-solving skills Whats on Offer Salary between £35,000 £45,000 depending on experience Opportunity to work in a clean, modern workshop with an experienced and friendly team Diverse and technically interesting projects across high-performance industries Continuous development and training on advanced software and machines

FOSTER CARE ASSOCIATES (THE FCA) Role: Senior/Supervising Social Worker - Full time - Permanent Basic Salary: Up to £34,324.62 per annum dependent on experience Benefits: Company Car or £2,000 Car Allowance, 30 days' Annual Leave, rising to 35 day's with length of service, + Bank Holidays, Life Assurance, Employee Discount Scheme, Company Pension & Medical Cash Plan Location: Homebased The location of the team is in Worcestershire, supporting our Foster Parents across Birmingham, Dudley, Walsall and Sandwell. Occasional travel to Bromsgrove and surrounding areas of West Midlands also required. ABOUT US Set up by a former foster parent and former social worker in 1994, Foster Care Associates (FCA) is an established fostering agency which forms part of the Polaris Community - one of the UK's largest leading communities of children's service providers. The business was born out of an enthusiasm for delivering fostering services to make a positive difference to the lives of looked after children. Our first office was in the Worcestershire countryside, and that's still where our Head Office is today. We've come a long way since those early days and, over the years, FCA has built a strong reputation for excellence, and now offers a wide range of services to children and families. But our purpose remains the same; 'to make a positive and lasting difference for children, families and communities', and it's underpinned by a series of values designed to help us assist children and young people to reach their full potential. Today, we're one of the country's largest and most experienced independent fostering agencies. But just because we're large doesn't mean we're impersonal. At FCA we're one big family, and we're committed to supporting every single child and foster parent, every single minute of the day. DUTIES WILL INCLUDE: • Support foster parents and their families to achieve outstanding outcomes for all children and young people in foster care. * Support and monitor the continued suitability and competence of Foster parents ensuring they provide a safe, healthy, nurturing and learning environment for children/young people. * Ensure that carers fully understand the fostering task, competencies to be achieved and the standards expected, including complaints and representation procedures as detailed in the FCA policies and procedures. * Provide and record regular supervision to allocated foster parents in line with FCA's Operational Standards. * Work in partnership in a team parenting approach to help identify any needs within the foster family e.g. respite, activities, therapy, holidays, with all members of the child's network, including contributing to all relevant meetings and any other tasks defined. * Ensure each child and foster parent are fully compliant in respect of all key documentation. * Attend meetings and/or provide reports for Commissioning Teams to address individual packages of care. * Promote participation of children/young people in the development of the agency and in accessing resources and opportunities in their local community. * Participate in an 'out of hours' support service on a rota basis * Undertake occasional initial home visits and Form F Assessments. YOU MUST HAVE: • A Social Work qualification * Professional registration with Social Work England or equivalent * Proven ability to produce a high standard of report writing * A comprehensive working knowledge of relevant legislation and child safeguarding procedures * The willingness and ability to travel extensively (including occasional nights away) * Confidence with transporting children and young people in sometimes stressful/difficult situations * Full driving licence For more information about this exciting role, please contact Karen Hodder - Manager in the Process of Registration on 07967 381039. To be considered, please apply and we will be in touch. No agencies please. The FCA is an equal opportunities employer and has been awarded the disability confident employer by the jobcentre plus. The successful applicant will be subject to a DBS check at enhanced level if successful for the position. TPBN1_UKTJ

The Role My client is seeking an experienced Revit Technician to join a growing building services engineering team. This role will focus on producing high-quality AutoCAD 2D drawings and Revit 3D models to support mechanical and HVAC projects from concept through to completion. You will work closely with design, project, and delivery teams, providing technical drawing support while ensuring industry standards, quality, and health & safety considerations are met at all stages. Key Responsibilities for the Revit Technician * Produce high-quality AutoCAD 2D drawings and Revit 3D models, including: * Building layouts * General Arrangement (GA) drawings * Fabrication drawings * P&IDs * Interpret system designs, site sketches, and technical data to create or amend project drawings * Input technical data from system datasheets into drawings and schematics * Attend site when required to assist with surveys and generation of survey drawings * Liaise with suppliers and project stakeholders regarding drawing and model queries * Maintain drawing registers and manage incoming/outgoing drawings * Assist with conceptual design work alongside sales and design teams * Apply value engineering principles at the drafting and modelling stage * Identify and document residual design risks within drawings where applicable Essential Skills & Experience for the Revit Technician * Minimum 3 year...

Innovative and progressive subcontract Machining Specialist organisation seeks an experienced CNC Setter for immediate start. Permanent Contract offered with competitive rates of pay and progression opportunities provided. An exciting opportunity to join a highly professional team working within a productive, forward-thinking environment. Previous CNC experience is essential to fulfil the position of CNC Setter. Within this role you will be offered overtime, free car parking and company pension. Duties and responsibilities of CNC Setter * Set and Operate CNC sliding head/fixed head machines such as Tornos Deco with a TB Deco and/or Fanuc control, Star Fanuc control, Hanwha with Fanuc control, Doosan (DN Solutions) with Fanuc control * Fanuc programming (Deco programming as advantage) * Focus on production of high-quality components * Maintain the section with offsets and tooling * Leaving work area/machines in good condition at the end of shift in terms of material tooling * Ability to leave machines running safely to support next operator starting at 6:45am (nights) * Occasional simple repeat change overs * Using measuring gauges * To produce components within the agreed standard time * Ability to read and interpret drawings * Working to tight tolerances and in process measurements * High precision tolerance works as well as volume * Quality control, working to customer specification Skills/attributes requi...

Job title: Customs Clearance Clerk Location: Bromsgrove, B60 Salary: £30,000 DOE Hours: 9:00-17:00 Monday to Friday (office based) Customs Clearance Overview Our client is a growing logistics and freight forwarder specialising in temperature-controlled supply chains and perishable logistics. With a strong international position within the fruit and fresh produce supply chain, the business is currently expanding its operations across the United Kingdom and Europe. As an experienced customs specialist, you will be responsible for managing UK customs processes, ensuring the correct handling of import and export shipments. This role requires someone who can hit the ground running, work collaboratively with operations teams, and bring valuable knowledge and ideas to support the wider logistics operation. Customs Clearance Clerk Key Responsibilities Independently handle import and export customs clearances Complete customs declarations using Custrans software (training provided) Manage sea freight import customs processes and support export entries where required Prepare, review and submit customs documentation and declarations Ensure full compliance with UK and international customs regulations Coordinate logistics activities within the perishable supply chain Liaise with internal operations teams, freight partners, clients and regulatory authorities Maintain communication with customs authorities, logistics partners...

Permanent Role: Residential Groundworks Contracts Manager £70,000 to £100,000 p.a plus Benefits Car Allowance / Company car CAREER OPPORTUNITY – SALARY BETWEEN £70,000 TO £100,000, CONTRACTS MANAGER ROLE, CAREER PROGRESSION An opportunity for an experienced Contracts Manager who wants to progress their career to join a growing company who have expanded their business and are now looking to add an experienced Contracts Manager to join their Operational team. West Midlands based the company are in an ideal position to commute to and from for local projects. Duties: • Monitoring progression on site, and day to day operations on projects • Continually manage performance against contracts programme • Maintain strong relationship with clients • Produce monthly updates to the Operations Director on project performance • Arrange resources for project delivery Requirements: • SMSTS • Ability to commute as and when required • Experience working in residential groundworks as a Contracts Manager • Excellent interpersonal skills Remuneration: • £70,000 to £100,000 p.a • Car allowance / Company car • Paid Holiday • Pension Scheme...

This is an opening for a Digital Marketing Executive with a growing creative agency powered by ideas, fuelled by pots of caffeine, and held together by people who genuinely love what they do. They’re now on the hunt for a digital marketer who doesn’t just “do digital,” but enjoys diving head-first into the glorious chaos that is paid, SEO, and social. It’s made for someone ready to step up, wants more ownership, more say, and more chances to prove that yes, you do in fact know way more than the algorithm gives you credit for. They’re not the biggest or the flashiest, but what they are is grounded, welcoming, and full of people from all sorts of backgrounds. It’s a culture that works, and the proof is in their incredibly low staff turnover. The role: This agency exists in the B2B space and the work they produce has won them a few awards along the way and they now need someone who can guide clients across the digital ecosystem, from social & email to video, SEO and paid media. If you want variety, autonomy, and the freedom to shape campaigns that make things happen, you’ll thrive here. You don’t have to know everything but a good grasp of what works and what doesn’t is important. You’ll be working alongside the leadership team, not as an assistant, but as the person who keeps things moving, keeps things sensible, and occasionally keeps things sane. You’ll present reports without turning into a h...

SF Recruitment are working with a well-established, multi-entity organisation to recruit a Senior Management Accountant to join their established finance function. This is an excellent opportunity to join a business known for its supportive culture, strong leadership, and genuine long-term career progression opportunities, alongside an industry-leading benefits package. Reporting to the Financial Controller, the role will involve leading the Management Accounts team while ensuring accurate reporting, strong financial controls, and effective business partnering across the organisation. We will consider applicants from both an industry background or those in practice looking for their first industry move. The Role * Produce timely and accurate monthly management accounts across multiple entities, including consolidation activities * Build strong relationships with operational stakeholders, providing clear financial insight and performance reporting * Deliver high-quality financial commentary to senior leadership * Maintain balance sheet integrity, ensuring reconciliations are complete, risks identified, and issues resolved * Support and strengthen the ...

Product Design Engineer - Worcestershire- up to £40,000 + Benefits - REF 2000 I am currently recruiting for a Product Design Engineer to work for a leading engineering manufacturing organisation based in the Worcestershire. Salary up to £40,000 + Benefits. The organisation is a specialist UK manufacturer renowned for their consumer electronic products. They have been established for close to 15 years and work operate at the forefront of the market from their centre of excellence in the Worcestershire supporting their broad and ever evolving client base. To support continued business growth, they are seeking to appoint a Product Design Engineer on a permanent basis. In this role as a Product Design Engineer, you will be responsible for designing new products from concept to manufacture as well as modifying existing products to create innovative concepts and improve overall product performance and functionality. You will also produce detailed manufacturing drawings for subcontractors, along with assembly drawings and instructions for the in-house assembly team. This is a hands on position where you will sometimes be working in a lab and this could include building and assembling prototypes, metal fabrication, 3D printing and wiring of electrical components. You will need to be comfortable getting involved in the practical aspects of the role beyond design work alone. Essential requirements:

About the Role: We are seeking an experienced MIG Welder to join a busy and well-established manufacturing team. This is a fantastic opportunity for someone with strong welding experience looking for long-term, stable work and great hours. Hours: 7am-3:30pm Monday to Thursday/ 7am-1:30pm Friday Pay rate: £14.50-£15.00 per hour Contract: Temporary to Permanent Key Responsibilities: • MIG welding on mild steel components, • Working from engineering drawings, • Fabrication tasks as required, • Maintaining quality and safety standards, • Keeping the working area clean and organised Requirements: • Previous experience as a MIG Welder (mild steel essential), • Ability to read and work from technical drawings, • Strong attention to detail and ability to produce quality finishes ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity. AMRT1_UKTJ ...

The Role We are seeking a commercially driven and results-focused Business Development & Key Account Manager to drive revenue growth, win new business and develop strategic ecommerce and fulfilment accounts. This is a high-impact role responsible for exceeding revenue and profit targets, strengthening customer relationships, and identifying new commercial opportunities across both domestic and international markets. Key Responsibilities * Achieve and exceed revenue and profit targets * Win new business through proactive prospecting and lead generation * Develop and grow existing key accounts through strategic account planning * Manage customer contracts and SLAs, ensuring KPI delivery * Identify cross-selling and value-added service opportunities * Act as the primary point of contact for nominated accounts * Produce regular sales reports, forecasts and performance updates * Collaborate with internal teams to ensure seamless service delivery * Drive operational improvements, efficiency and cost reduction initiatives What We’re Looking For * Minimum 5 years’ B2B sales experience within ecommerce, fulfilment or logistics (B2C exposure desirable) * Proven track record of achieving and exceeding revenue and profit targets * Strong understanding of carrier networks and ecommerce supply chains * Demonstrable success in winning new business and growing existing accounts * Commercially astute with str...

CAD Technician Bromsgrove Competitive Salary Our client is a specialist engineering company delivering high-quality mechanical and electrical systems across a wide range of sectors, including manufacturing, construction, and service industries. Due to continued growth, they are looking for a talented CAD Technician to join their dynamic team. This is an exciting opportunity to play a key role in transforming engineering concepts into detailed technical designs, while supporting innovative projects from initial concept through to final delivery. As a CAD Technician, you will work closely with engineers, clients, and project teams to develop accurate and detailed technical drawings. You will be responsible for managing design projects and ensuring all specifications are translated into high-quality CAD outputs. CAD Technician Responsibilities Gather and interpret technical engineering specifications from clients Produce detailed engineering drawings using AutoCAD and Revit Manage design projects from initial concept through to delivery Provide technical support to clients and the wider engineering team Ensure drawings and documentation meet project and industry standards CAD Technician Requirements Previous experience as a CAD Technician or similar role Strong proficiency in AutoCAD and Revit Experience managing design projects from concept to completion Industry experience within construction, manufacturing, or service se...

Quality Engineer Job ID:40621 Monday to Friday swing shift 6am – 2pm & 2pm – 10pm £48,000 - £50,400 per annum Washford Industrial Estate B98 Redditch Our client is a leading manufacturer supplying to customers globally. The work on site is precision manufacturing work with different processes to produce their finished product. The purpose of the Quality Engineer with our client is to develop and implement a robust root cause and corrective action culture within the organisation. The Quality Engineering function is key to co-ordinating and leading activities with a cross functional team to deliver and sustain improvements to both direct and indirect processes within the organisation. Quality Engineer background needed: * Be able to own and lead activities/Kaizen events with cross functional teams Strong working knowledge of key engineering tools, industry gateways and metrics such as: * SQDCP * APQP/ PPAP * MSA * PPS/ 8D * PFMEA * SPC Key Tasks and Personal background needed * Lead 8D improvement activities with cross functional teams. * Leading cross functional 8D projects to ensure that feedback is obtained from staff with the most relevant experience. This will involve the use of a coaching style approach. * Auditing experience (Perform internal/external audits) * Define key improvement activities to improve the company’s quality p...

Are you an aspiring Second Chef with experience in a fast-paced kitchen environment with an emphasis on fresh and seasonal produce? Looking for a rewarding career with excellent training and opportunities for development? Then join Care UK, a multi award winning care provider as a Second Chef. We ha

The client are an established designer and manufacturer of bespoke test systems and applications for the automotive industry. They are seeking to recruit an Installations and Commissioning Engineer for their busy operations in Worcester. Salary on the role is up to £48k per annum. The role is Monday to Thursday 8.30am to 5pm and then Friday 8.30am to 1pm. Key responsibility of the role The Installation and Commissioning Engineer is responsible for the on-site installation, testing, commissioning and handover of systems and equipment to ensure they meet design specifications, safety standards, and customer requirements. The role involves close collaboration with project managers, design teams, and clients to deliver projects on time and to a high standard of quality. Responsibilities and duties • Install, configure, and commission equipment and systems according to engineering drawings, specifications, and project plans, • Perform pre-commissioning checks, functional testing, and performance verification, • Diagnose, troubleshoot, and resolve technical issues during installation and commissioning, • Ensure all work complies with health, safety, environmental, and quality standards, • Liaise with customers, contractors, and internal teams during site activities, • Produce commissioning reports, test documentation, and as-built records, • Provide technical support and training to customers and operators as required, • Participate in factory acceptance tests (FAT) and site acceptance tests (SAT), • Support system upgrades, modifications, and corrective maintenance when needed, • Proven experience in installation, commissioning, or field engineering roles, • Strong understanding of electrical/mechanical systems, controls, and instrumentation, • Knowledge of engine test and component test related equipment, • Understanding of PLC software and troubleshooting using diagnostics tools (Siemens S7 preferable), • Integrating control technology into mechanical assemblies, • Calibration of instruments, • Fluid systems of solid and flexible pipes and fittings including- fuel systems, petrol and diesel, water systems for engine systems, oil systems, pressure testing and lead detection, filtration, flow, temperature and pressure testing, • Pneumatics systems knowledge (hard piping, flexible hoses and plastic tubing), • Able to read technical engineering drawings, • Able to travel nationally and internationally to client sites, • Clean driving license JBRP1_UKTJ

Per anum What we're looking for in the perfect Sous Chef Have experience as a Sous Chef or strong CDP ready for the next step. Based in a stunning location and working alongside a large team of chef's, the Sous Chef will be working with locally sourced produce. Berkeley Scott are partnering with an

A leading financial advisory firm in Bromsgrove seeks an Investment Support Administrator - Client Reporting for a full-time, permanent role. The ideal candidate will produce annual valuation reports and support in delivering quality checks on various financial documents.

Job Title : Capital Quantity Surveyor Client : Bromsgrove District and Redditch Borough Council Status : Inside IR35 Hours Per Week : 37.00 Start Date :01/04/2026 End Date : 01/10/2026 Start Time :09:00 End Time :17:30 Umbrella £42.08 We are seeking an experienced Quantity Surveyor to join our team and play a key role in the development of appropriate contract documentation, procurement of goods, services and works contracts across Housing Property Services. With the delivery of these contracts the post holder is responsible for the financial measurement and valuation of works, preparing interim payments and final accounts together with all necessary project related financial reports. This is an exciting opportunity for a proactive professional who is committed to delivering high-quality outcomes. Key Responsibilities • Prepare contract documents including Tenders, Bills of Quantities, Work Schedules, Specifications, and Schedule of Rates., • Procure goods, services, and works contracts, including participation in tender evaluations and reporting outcomes., • Undertake site measurements and valuation of works, preparing payment notifications and associated documentation., • Prepare and agree costs for variations and non-standard items of work., • Analyse and agree claims and final accounts., • Produce accurate financial reports for projects and contracts., • Maintain up-to-date knowledge of standard methods of measurement and standard forms of contracts, • Assess, collate, and present leaseholder contributions and service charges, conducting reviews where required., • Assist and prepare any relevant returns associated with Government or Regulator requirements, and external funding providers. Skills & Experience • Minimum 2 years’ post-qualification experience in the Construction Industry, covering pre- and post-contract Quantity Surveying duties., • Knowledge of various forms of building contracts., • Proven experience in budget management (revenue, capital, and external funding sources)., • Experience of creating and issuing relevant contract administration documents., • Degree or equivalent qualification in Quantity Surveying., • Knowledge of UK H&S regulations including CDM, • Must be flexible and have a ‘can do’ attitude and approach in supporting the demands and specific needs of the service

Maintenance Engineer - FMCG Salary: £44,000 + Excellent Benefits Location: Redditch Permanent Hawk3 Talent Solutions are recruiting for an FMCG manufacturer as they continue to expand due to ongoing investment and new projects. This is a business built on strong principles: they operate with integrity, take pride in what they produce, and genuinely value the people who make their success possible. Collaboration is at the heart of their culture, and they're known for maintaining exceptionally high standards across their supply chain. If you're looking to join a company that cares about quality, encourages fresh ideas, and supports long term development, this is an excellent opportunity. Shift Options Available Option 1 - Monday to Friday (Rotating Weekly) 06:00-14:30 14:00-22:30 Option 2 - Enjoy a 3?Day Weekend Every Week Sunday-Tuesday: 05:30-17:30 Wednesday: 05:30-12:30 About the Role As a Multi Skilled Maintenance Engineer, you'll play a key role in keeping production running smoothly within a fast paced FMCG environment. You'll be responsible for both planned and reactive maintenance, ensuring machinery is safe, reliable, and ready to support production demands. Key Responsibilities Carry out and record corrective maintenance on plant machinery and services efficiently to minimise downtime. Complete and document planned preventative maintenance in line with Engineering schedules. Communicate effectively with Engineering colleagues and Production Supervisors regarding breakdowns and ongoing issues. Report any production downtime to the Engineering Supervisor or Manager. Maintain accurate fault logs and ensure clear handovers between shifts. Notify Production when machinery or services are ready following maintenance. Ensure all equipment is safe, compliant, and ready for operation after maintenance work. Ensure all documentation is completed accurately and submitted to relevant departments on time. Essential Requirements Completed recognised Mechanical or Electrical Engineering Apprenticeship. Good communication skills The ability to work under pressure Benefits 33 days annual leave Life Assurance (4x salary) Benefits platform Wellbeing portal with GP hotline and counselling sessions Salary sacrifice pension scheme Free onsite parking Staff sales Long?term career opportunities due to ongoing growth and investment Interview process - face to face interview and factory tour and then a short technical test if this is successful

Nelson Permanent Placements are recruiting on behalf of a well-established UK manufacturer and supplier of security and fire protection products. Our client operates as a leading name within the electrical industry, known for designing, developing and distributing high-quality electrical accessories, lighting solutions, CCTV, fire alarm and smart technologies to the professional trade market. With a strong reputation for innovation, reliability and technical expertise, this opportunity offers the chance to join a collaborative technical team supporting the design and specification of life safety and security systems. The successful candidate will play an important role in developing compliant system designs, producing technical drawings and documentation, and providing product-related support to internal sales teams and customers across CCTV, fire alarm, access control and related technologies. This position would suit someone with a strong technical or electrical background who enjoys problem solving, technical design work and working within a supportive team environment. The key responsibilities of this role as a Design Support Technician: • Develop system designs from customer specifications and fire strategies., • Produce design specifications and supporting technical documentation., • Carry out calculations required to validate system designs., • Convert system designs into CAD drawings and Relux layouts., • Support the development of designs in accordance with relevant British Standards and codes of practice., • Provide technical product support for CCTV, fire alarm systems, access control, disabled refuge systems and related technologies., • Respond to internal and external customer design enquiries., • Maintain up-to-date information for team schedules and project progress., • Assist with completing relevant sections of Operation and Maintenance (O&M) manuals., • Attend site surveys and customer meetings where required., • Participate in the design rota to arrange commissioning engineers to attend site., • Support the wider design team to improve efficiency and productivity. Qualifications and skills of a Design Support Technician: • Previous experience designing fire alarm, emergency lighting, CCTV, intruder, access control or emergency voice systems., • Strong technical or electrical background., • Knowledge of BS 5839 (Part 1, 6 and 9) and BS 5266 standards. Knowledge of standard commissioning practices to BS 5839-1:2025 is desirable., • Understanding of BS 7671 wiring regulations and electrical circuitry., • Ability to produce concept artwork and CAD drawings and roficient in Microsoft Office package and Intermediate knowledge of Adobe software including Photoshop, InDesign and Illustrator., • Excellent written and verbal communication skills with strong analytical, problem-solving and organisational skills., • Self-motivated with the ability to work both independently and as part of a team with the ability to prioritise tasks and meet deadlines in a fast-paced environment., • Professional telephone manner and the ability to interact effectively with internal teams and customers., • FIA training is desirable (training can be provided). The employment package for a Design Support Technician: • On-site role in Redditch offering strong teamwork and support, • Monday – Friday, • £32,000 - £35,000 per annum, • 25 days holidays, • Opportunities for industry training and professional development, including FIA training., • Collaborative working environment with opportunities to work on varied technical projects., • Exposure to a wide range of life safety and security system technologies. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed

Product Design Engineer - Worcestershire- up to £40,000 + Benefits - REF 2000 I am currently recruiting for a Product Design Engineer to work for a leading engineering manufacturing organisation based in the Worcestershire. Salary up to £40,000 + Benefits. The organisation is a specialist UK manufacturer renowned for their consumer electronic products. They have been established for close to 15 years and work operate at the forefront of the market from their centre of excellence in the Worcestershire supporting their broad and ever evolving client base. To support continued business growth, they are seeking to appoint a Product Design Engineer on a permanent basis. In this role as a Product Design Engineer, you will be responsible for designing new products from concept to manufacture as well as modifying existing products to create innovative concepts and improve overall product performance and functionality. You will also produce detailed manufacturing drawings for subcontractors, along with assembly drawings and instructions for the in-house assembly team. This is a hands on position where you will sometimes be working in a lab and this could include building and assembling prototypes, metal fabrication, 3D printing and wiring of electrical components. You will need to be comfortable getting involved in the practical aspects of the role beyond design work alone. Essential requirements: Atleast 1 years' experience as a Product Design Engineer, Product Development Engineer, Mechanical Design Engineer, Manufacturing Engineer or similar 3D CAD Knowledge of sheet metal fabrication and CNC machined components Experience working with Electrical / Electro-Mechanical componentsDesirable Requirements: Inventor Autodesk Vault Plastic Injection Moulding Die CastingThis is a fantastic opportunity for a Product Design Engineer to work for a leader within their field where the work is continuously varied keeping you engaged and challenged. The business is growing and therefore there will be plenty of opportunities to progress and develop should this appeal. This is an immediate requirement so if you have the required skills and experience then please get in touch ASAP with an up to date copy of your CV

Your new company Are you a tech‑savvy problem solver who loves improving systems, supporting people, and making technology work smarter for a growing business? This organisation is looking for an IT Support Technician who wants to be part of a modernising, innovative, and values-driven organisation helping them accelerate their journey of digital transformation, automation, and business growth. They are more than just an engineering and manufacturing business; they're a corporate family. They take pride in delivering quality, supporting each other, and constantly improving. You'll work closely with the UK teams and our Group IT department in Germany, supporting all technology across the business and helping shape the systems of tomorrow. Your new role As the IT Support Technician, you will play a key part in maintaining and developing the entire UK technology stack. You'll support end‑users, help deliver critical IT and business projects, and ensure all our systems remain secure, reliable, and future-ready.You'll be involved in everything from daily technical support to major digital initiatives, including SAP rollouts, cloud migrations, IoT automation, fleet systems, and much more. Technical Support & Operations Provide deskside and remote support across all UK sites Maintain servers, operating systems, security tools, hardware, and mobile devices Assist with backups, business continuity, access management and licence renewals Produce clear training content, including video-based process guides Work collaboratively with Group IT in GermanySystems & Project Delivery Support SAP Business One implementation for new acquisitions Assist with cloud migrations and infrastructure transitions Help deliver new digital systems, including fleet software, AP automation, e-signing and expenses tools Support IoT initiatives connecting vehicles, sensors and devices for predictive maintenanceContinuous Improvement Audit systems and processes to identify risks and opportunities Suggest and support new technologies that improve efficiency Ensure adherence to security, environmental and health & safety policies What you'll need to succeed Strong interest and knowledge in: Servers & virtualisation, Microsoft technologies, networking (access, core & edge), ERP/CRM systems, backups & recovery, monitoring tools, hardware support Excellent communication skills and a friendly, customer-first attitude Logical, analytical thinker with strong problem‑solving skills High attention to detail and pride in delivering quality work A collaborative team player with the confidence to ask for support when needed Ability to prioritise workload and provide regular updates to stakeholders Commitment to our core values: Honesty, Corporate Family, Continual Improvement, Quality, InnovationDesirable Experience working in a similar technical support environment Project management knowledge Basic accounting or financial systems awarenessWhat you'll get in return A supportive, family-oriented working culture Opportunities for growth, development and training Involvement in modern digitalisation initiatives A role where your ideas truly make a differenceWhat you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

The basics: Job Title: Press Operator Industry: Precision Engineering Location: Redditch Pay: £14.12 - £14.76 per hour with rates of £16.68 available + Overtime. Shift: Day Shift - Monday to Thursday (7.30am - 4.30pm) and Friday (7.30am to 12.30pm) Contracted hours per week: 39hrs. Overtime available at x1.33 Mon-Fri, x1.5 Saturday and x2 Sunday Holidays/Benefits: Holidays are calculated in hours but work out to be 5.6 weeks of annual leave per year inc. bank holidays, increasing to 6.6 weeks inc. bank holidays following 1 year of continuous service. Death in Service Benefit - 2 x annual salary. Employer 3% / Employee 5% - Pension. Overview: We now require a Press Operator to join the day shift. Working CNC operated machinery you will be tasked to produce precision engineered parts. Key responsibilities of the Press Operator role: Set and Operate Press machinery - Hydraulic press machines OR CNC Press Brakes.The ideal candidate / Press Operator may have some of the following, however, please note these are only desirable and not essential as all applications will be looked at individually: Must have previous experience operating press machinery.Commutable from: Redditch, Alcester, Stratford-upon-Avon, Droitwich and surrounding areas. Interested? If you are interested in the Press Operator role, please apply immediately due to the urgency of this role. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Senior Site Manager Worcestershire Upto £70,000 plus package Care Home or Retirement Living experience is essential! Our client, a main contractor with a Head Office located in Birmingham are actively looking to develop their operational team with the introduction of a site based Senior Site Manager. As a main contractor our client has 2 focus business sector: Care Homes/Retirement Living & BTR. The are market leaders within this sector and have produce an fantastic end product every time. Our client currently enjoys a turnover of £100 million and deliver New Build projects up to the value of £20 million. You will work closely with a site based Project Manager and will have day to day operational responsibility for your live project(s). The Candidate (Senior Site Manager): As a Senior Site Manager you should have well-rounded general main contracting experience gained through working on a variety of project types with the ability to work independently with confidence and decisiveness. • Previous Retirement Living sector experience • SMSTS • First Aid • A full UK driving license The Package: • Salary: Up to £70,000 dependent on experience and subject to review after probation period • Company Car / Allowance • Workplace Pension • Bonus

We are recruiting for a specialist structural engineering consultancy delivering innovative solutions for large-scale sports and entertainment venues. The company works with architects, contractors, and developers to design and deliver complex stadium structures, grandstands, and arena infrastructure using advanced digital design and BIM methodologies. Architectural Technologist responsibilities • Produce and develop detailed architectural drawings and technical information for stadium and sports venue projects. * Develop and manage BIM models using Revit, ensuring coordination with structural and MEP consultants. * Support project teams with technical detailing and construction documentation from concept through to delivery. * Assist with BIM coordination, clash detection, and model management within a federated design environment. * Ensure designs comply with UK Building Regulations and relevant construction standards. * Collaborate with architects, engineers, and contractors to ensure buildable and efficient design solutions. Architectural Technologist requirements • Degree or qualification in Architectural Technology, Architecture, or a related discipline. * Strong experience using Revit and working within BIM workflows. * Experience producing technical construction drawings and detailed design packages. * Knowledge of UK Building Regulations and construction standards. * Experience working on large-scale or complex building projects. * Strong communication and coordination skills when working within multidisciplinary teams. Architectural Technologist benefits • Opportunity to work on landmark stadium and large-scale sports venue projects. * Salary between £45,000 - £65,000 and benefits package, depending on experience. * Exposure to advanced BIM technologies and digital design tools. * Career development and training within a specialist engineering consultancy. * Collaborative and innovative project environment

Logistics & Freight Coordinator Worcestershire FMCG | International Supply Chain £36 – 38K+ Benefits Alexander Steele are delighted to be supporting a successful manufacturing business who are hiring a newly created Logistics & Freight Coordinator position. This is an exciting opportunity to join a growing organisation at the centre of its international supply chain operations. Overview The Logistics & Freight Coordinator will play a key role in managing international freight movements, container bookings, and 3PL relationships to ensure the efficient, cost‑effective, and on‑time delivery of goods. This role acts as a central link between logistics partners, internal teams, and international stakeholders, ensuring accuracy, visibility, and smooth operational flow across the supply chain. Key Responsibilities • Book and manage international container collections in line with required transit times and customer commitments., • Track shipment milestones, monitor carrier performance, and escalate delays when required., • Ensure on-time departure and arrival across ocean and road freight channels., • Verify freight invoices against agreed rates and challenge discrepancies where necessary., • Support benchmarking of freight providers and assist with carrier selection decisions., • Serve as the primary contact for the 3PL warehouse regarding shipment queries and documentation requirements., • Liaise effectively with UK-based and international teams across Procurement, Planning, Finance, and Operations., • Maintain accurate export and customs documentation in line with compliance standards., • Produce and report on key KPIs, including OTIF, transit performance, cost variance, and invoice accuracy., • Contribute to continuous improvement activities within the logistics function

About the Business We’re recruiting for a commercially focused Finance Business Partner / FP&A Manager to join a growing logistics business based in Bromsgrove. This is a high-impact role supporting senior stakeholders with forecasting, performance analysis and strategic decision-making, offering super-flexible working with just two days per week in the office. The role is a true mix between business partnering and FP&A. Main Duties: As a Finance Business Partner/FP&A Manager, your main duties include: • Lead the annual budgeting, forecasting, and long-term financial planning cycles., • Oversee weekly and monthly cashflow forecasting, analysis, and reporting., • Build and maintain robust financial models to support strategic and operational decision-making., • Analyse financial performance to identify trends, risks, and growth opportunities., • Partner with stakeholders across the business to ensure financial plans align with overall objectives., • Drive continuous improvement across financial processes, systems, and reporting to enhance accuracy and efficiency., • Produce and present regular financial reporting, including monthly, quarterly, and annual outputs., • Support the development of longer-term financial strategy and planning initiatives., • Undertake additional responsibilities as required in line with the scope of the role. Location / Office / Culture This organisation offers a genuinely flexible working environment, with a hybrid model requiring just two days per week in the Bromsgrove office. You’ll be joining a supportive leadership team that values accountability, open communication and continuous improvement, creating an environment where you can make a visible impact while maintaining a strong work–life balance. What We Are Looking For The ideal candidate will have: • Fully qualified accountant (ACCA, CIMA or ACA)., • Minimum of 5 years’ experience within financial planning and analysis., • Degree educated in Finance, Accounting or a related discipline., • Strong systems capability, with advanced proficiency in financial software (e.g. SAP, Sage) and Microsoft Office, particularly Excel. Why Join the business • Super-flexible working arrangements with a hybrid model (2 days in the office)., • Generous annual leave allowance., • Comprehensive benefits package., • Supportive and collaborative working environment with strong work–life balance. About Us We are a local accountancy recruitment specialist. We appreciate that roles are often online for a long period of time. If you want to check if this role is still live or just want more details before applying, call us directly. Ref: DT64936

Marketing Executive -Bromsgrove office based role full time £30-35,000 per annum depending on your skills and experience Our client is a fast-growing, award-winning UK e-commerce business specialising in high-performance technical products. They are looking for a Marketing Executive to support our expanding marketing function across digital and offline channels. This is an exciting opportunity for someone who enjoys working in a commercially focused environment, supporting product launches, campaigns and ongoing e-commerce growth serving both B2B and B2C customers nationwide. You will play a key role in supporting marketing activity across campaigns, website management, content creation and social media. Working closely with the wider marketing team, you’ll help ensure consistent brand messaging while driving visibility, engagement and conversion. Marketing Executive Key Responsibilities: - Campaign & Advertising Support, Website & E-commerce Management, Content Creation & Copywriting, Social Media Management as well as Offline Marketing & Events Assist in planning and executing multi-channel marketing campaigns (paid media, email, social). Support the setup and optimisation of paid advertising (e.g. Google Ads, paid social). Identify opportunities to improve targeting, budgets and creative performance. Maintain and update product listings, ensuring accuracy and quality of content. Optimise product pages to improve customer experience and conversion rates. Use analytics tools to monitor performance and provide actionable insights. Produce engaging content for web, email and social channels. Write clear, compelling product descriptions that translate technical features into benefits. Assist in creating simple visual assets using tools such as Canva. Create engaging posts that support campaigns and brand storytelling. Support marketing for events, exhibitions and trade shows. Coordinate printed materials such as brochures, signage and technical inserts. The successful Marketing Executive will have the following skills and experience:- Ideally CIM qualified with previous commercial experience in a multi-channel marketing role. Strong copywriting skills with attention to detail. Experience working with e-commerce platforms (e.g. Shopify) would be advantageous. Comfortable using tools like Canva or similar for basic design work. Highly organised with the ability to manage multiple priorities. Analytical mindset with confidence interpreting performance data. Be part of a growing, ambitious e-commerce business. Work across a wide variety of marketing channels and projects. If you think you have the skills and experience and most importantly the enthusiasm for a role like this then please click APPLY with your updated CV and we will be in touch soon

Commercial Sales Manager Location: Redditch, Hybrid Logistics, 3pl Excellent salary, car allowance, pension, 25 days holiday, option to buy more. About the Business This business is a well-established and fast-growing provider within the e-commerce, fulfilment, and logistics space, supporting B2B and B2C customers across the UK and internationally. Known for operational excellence, scalable solutions, and strong customer partnerships, the company is focused on continued growth, innovation, and delivering measurable value for its clients. The Role We're looking for a driven Commercial Sales Manager to accelerate growth, win new business, and maximise value from key accounts. This is a hands-on, high-impact role for a confident closer who thrives in fast-paced e-commerce and fulfilment environments. You'll own revenue and profit targets, lead customer relationships end-to-end, and act as a commercial project leader across new and existing accounts. Key Responsibilities Exceed revenue and profit targets across nominated accounts Win new business through proactive prospecting and cold outreach Drive account growth through up-selling, cross-selling, and deeper engagement Own account plans, contracts, SLAs, KPIs, and performance reviews Introduce customers to a full suite of logistics and fulfilment solutions Act as the senior commercial contact for customers Collaborate with internal teams to ensure seamless service delivery Identify efficiency, cost-saving, and improvement opportunities Maintain accurate CRM data and produce weekly sales reports Build strong networks across the e-commerce and logistics sector What You'll Bring Experience Extensive B2B/B2C sales experience in e-commerce, fulfilment, or logistics Proven track record of exceeding revenue and profit targets Strong understanding of carrier networks and e-commerce operations Demonstrable success in new business development and account growth Experience in fast-paced, high-growth environments Skills Excellent negotiation, influencing, and presentation skills Confident managing contracts, KPIs, and commercial forecasts Self-sufficient lead generator with strong pipeline discipline Commercially astute and customer-focused Full clean driving licence Personal Attributes Results-driven closer with high ownership and accountability Proactive, resilient, and highly organised Comfortable leading projects and resolving complex challenges Passion for continuous improvement and customer success Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

The basics: Job Title: NDT Inspector Pay: Grade A: £17.88, Grade B: £18.56, Grade C: £19.26, Grade D £20.62 Shift/hours: Late Shift - Monday to Wednesday 16:30 to 02:30 and Thursday 16:30 to 01:30 Location: Redditch Industry: Manufacturing Holidays/benefits: Production Bonus Scheme, Pension, Death in Service Benefit - 2 x annual salary, Additional Annual Leave Entitlement, 5.6 weeks of annual leave per year. Overview: Working in modern, purpose-built manufacturing facilities we now require a NDT Inspector (level 2 or above) to the join the business. Overview of responsibilities: · Perform inspection operations (DPI and visual) in full accordance with approved procedures. · Ensure all NDT equipment is properly maintained, calibrated, and suitable for use. · Conduct control checks and tests in line with procedural requirements. · Interpret and evaluate test results against defined acceptance criteria. · Produce work instructions for review and approval by the Level 3 engineer. · Manage workflow effectively to meet production schedules and priorities. · Prepare and authorise product test reports to the required standard. · Achieve and maintain Level 2 certification in the relevant Non‑Destructive Testing method(s). · Carry out tests and inspections to verify product conformity to customer specifications and technical definitions. · Ensure all parts are processed according to business priorities and completed within required timelines. The ideal candidate / NDT Inspector may have some of the following, however, please note these are only desirable and not essential as all applications will be looked at individually: Knowledge of machining and fabrication techniques for metal components Knowledge of AS9100, ISO14001 & NADCAP. Previous experience as an NDT inspector at level 2 or aboveCommutable from: Redditch, Alcester, Bromsgrove and surrounding areas. Interested? If you are interested in the NDT Inspector role, please apply immediately due to the urgency of this role. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Customer Service Advisor Redditch £25,000 – 35 hour a week contract hybrid working once training has been completed. They do want someone who lives within a commutable distance to Redditch. We are currently looking for a Customer Service Advisor to join a busy Customer Service team dealing with ordering processing, customer service queries and aftersales. This role is ideal for someone who is highly organised, customer-focused, and comfortable managing a variety of administrative tasks in a fast-paced trade environment. Customer Service Advisor Key Responsibilities Handle customer enquiries and process orders for products Provide excellent customer service by keeping customers informed throughout the order and delivery process Answer incoming telephone calls and respond to emails, letters, and other correspondence Liaise with carriers regarding delivery enquiries and updates Input customer orders onto the computer system and produce relevant sales documentation Raise internal paperwork including collection notes, credit requests, and purchase orders Maintain accurate records, including monitoring and booking in direct container shipments to customersThe successful Customer Services Administrator will have the following skills and experience:- Previous experience in customer service or administration Strong organisational skills and attention to detail Confident using computer systems and office software Excellent communication skills, both written and verbal Ability to manage multiple tasks and work well under pressureIf you are reliable, proactive, and enjoy working in a customer-focused administrative role, we would love to hear from you. Please click APPLY with your updated CV and I will be in touch soon

Where do people love what they do and enjoy being great at what they do? At Swisslog! Our teams are the heart of a world-leading robotics company that’s harnessing the power of technology to shape the future of intralogistics. The result? We’re transforming performance and efficiency for customers across the globe, giving them the vital edge in their markets. To help tell our exciting story, we are on the lookout for a Global Internal Communications Specialist.for a 12-month maternity cover contact. The role can be based anywhere in the UK and will be remote, with the occasional travel to our Redditch office in Worcestershire or in Europe. Want to be part of our story, read on… As a Global Internal Communications Specialist in a dynamic team, you’ll be the at the forefront of delivering Swisslog’s Global Internal Communications & Engagement Strategy. Your mission as a Swisslogger, is to connect, engage and inspire. You will partner with various senior stakeholders to communicate effectively with large groups of colleagues at a time of important change within the business. In this role, you will explore exciting and innovative ways to inform our people, boost engagement and inspire advocacy across multiple engagement campaigns and projects. Meaningful and effective internal communications are the heartbeat of our culture – and this role is pivotal in ensuring we connect with colleagues at the right time, enabling our people to thrive and connect stronger together with each other. What you’ll be doing: We are looking for someone who thrives on shaping and delivering bold and engaging colleague communications in a fast-paced environment. With a proven track record of using communications and engagement tools, tactics, and techniques, you will bring projects and campaigns to life with creativity, great planning and curiosity, both digitally and face-to-face. This role will suit an internal communications professional who is looking for an opportunity to showcase their skills in a global setting in a high-achieving team, with high-colleague engagement. Key responsibilities: ▪ Drive and deliver creative and engaging communication campaigns that support our strategic goals and P&O led projects ▪ Produce professional written, visual and digital content across our internal communications channels ▪ Help foster great conversations between leaders, managers and colleagues through our internal communications channels ▪ Measure and report on the effectiveness of our communication activities and channels ▪ Ensure the successful delivery of business-as-usual communication activities. ▪ Build and nurture relationships with key stakeholders, actively developing interpersonal skills, confidence and emotional intelligence to collaborate effectively with peers, senior stakeholders, maintaining a network across the organization. ▪ You will work closely with Marketing and P&O, as well as with the KUKA Group Communications Team. ▪ Use your advanced planning and organizational skills to anticipate stakeholder needs, plan communications in advance and always think one step ahead to achieve the best results. What you’ll need to have (our must haves) ▪ You’re an excellent writer and communicator with a strong command of English ▪ Have more than three years’ internal communications experience in a large complex business ▪ You’re a creative storyteller with an eye for design and a flair for producing engaging wellcrafted content and PowerPoint presentations. ▪ You are a pro at running Town Halls, creating engaging PowerPoint slides to tell the story ▪ You build strong relationships and collaborate well with peers and senior stakeholders ▪ You use data and business thinking to demonstrate the impact of your internal communications work. ▪ You’re technically confident with SharePoint, LinkedIn, with solid knowledge of social media and other digital tools ▪ Have experience in InDesign and video editing ▪ You’re calm under pressure, resilient and organized and able to work at a pace to meet deadlines. ▪ You stay curious about the internal communications industry and seek our best practice and inspiration from others ▪ You’re proactive, flexible and unphased by unexpected tasks or changing priorities ▪ Your work well both independently and as part of a cross-functional team Most of all, you will be great at what you do, making things happen and making team spirit come alive, whilst breaking new ground, always aiming high - as you are doing what you love

Customer Service Team Leader- Redditch (phone number removed)pm Monday to Friday office based no hybrid £28,000-£30,000 per annum depending on your skills and experience. We are seeking an experienced and motivated Customer Service Team Leader to join a dynamic and fast-paced organisation. This is an exciting opportunity for a confident leader who is passionate about delivering exceptional customer experiences while driving team performance and operational excellence. As a Customer Service Team Leader, you will lead, support, and develop a team to ensure consistently high service standards. You will play a key role in maintaining efficient operations, improving processes, and ensuring customer satisfaction remains a top priority. Customer Service Team Leader Key Responsibilities Lead by example to motivate and inspire a customer service team to achieve service level agreements (SLAs) and key performance indicators (KPIs) Take ownership of daily operations and contribute to the completion of team tasks Monitor team performance, providing regular coaching, feedback, and one-to-one support Conduct performance appraisals and identify training and development needs Handle escalated customer queries and complaints in a professional and timely manner Ensure adherence to company policies, procedures, and service standards Work collaboratively with internal teams to resolve issues and enhance service delivery Support recruitment, onboarding, and training of new team members Produce reports and analyse customer trends to inform decision-making Drive continuous improvement initiatives within the team Foster a positive, inclusive, and high-performing team culture Manage employee relations matters and support people management processes Provide leadership cover for other Team Leaders when required Undertake additional duties as needed to support business objectives The successful Customer Service Team Leader will have the following skills and experience:- Proven experience within a customer service or administrative environment Previous experience in a supervisory or team leader role Strong communication and interpersonal skills Ability to motivate, coach, and develop others Excellent problem-solving and decision-making abilities Comfortable using customer service systems and Microsoft Office Strong organisational skills with the ability to plan and coordinate workloads Calm, professional, and resilient under pressure Desirable Skills Understanding of HR policies and procedures Experience with data analysis and reporting tools You are a proactive and supportive leader who thrives in a team environment. You bring a customer-first mindset, a continuous improvement approach, and the ability to build strong relationships across teams. If you think you have the skills and experience that my client are looking for then please click APPLY with your updated CV and I will be in touch with you soo

Buyer (Fresh Produce) Location: West Yorkshire area - Site-based Salary: £35,000 - £42,000 + bonus (up to 12. Hours: Monday-Friday, 08:30-17:00 (can be slightly flexible on start) Ready to take ownership of a high-value fresh produce category supplying major UK retailers? About the R

PH1920 Fresh Produce Trader Foodservice sectorREWARDS: Basic £35K-£45K (OTE £55K) and company benefitsWORKING HOURS: 2am 10am (Nights)LOCATION: Southampton, Portsmouth, WinchesterFresh Produce Trader position with an industry market leaderTHE COMPANY: We are an established Foodservice wholesale

Fresh Produce TechnologistCustomer-Facing | Growing Technical TeamWe're working exclusively with G's Fresh, who are expanding its technical team due to continued growth. If you love fresh produce, enjoy working closely with customers, and want a role where yo.

Ready to take the lead on high-profile retail categories and shape the future of Fresh Produce?. If you love Fresh Produce, enjoy building strong partnerships, and thrive on working closely with both retailers and suppliers, this is the role for you. Proven experience in Fresh Produce, with retail-f