Project controls jobs in CheltenhamCreate job alerts

SENIOR HEALTH AND SAFETY ADVISORLocation: LondonSalary: 65,000 - 70,000Job Type: Permanent Sector: Civil Engineering / Tunnelling / Infrastructure1. About the CompanyThe company operates within the civil engineering and infrastructure sector, delivering major construction and tunnelling projects.The role sits within a major project environment, supporting operational teams and working closely with project management, site teams, clients and subcontractors to maintain high standards of health, safety and sustainability.2. About the RoleThe Senior Health and Safety Advisor will lead and support health and safety across major infrastructure projects, providing guidance and leadership to operational teams throughout construction.The role will involve working closely with directors, managers, supervisors, site teams and clients to ensure statutory, project and company health and safety requirements are met.You will also take responsibility for inspections, audits, incident investigations, H&S reporting, improvement plans and safety initiatives across the project.3. The key responsibilities for this Senior Health and Safety Advisor role are:Lead best practice across health, safety and sustainabilityAdvise directors, managers and supervisors on their H&S responsibilitiesLiaise regularly with the client and build effective working relationshipsLead health and safety improvement projects and initiativesEnsure appropriate management controls are in placeSupport site management teams with H&S complianceLead junior H&S Advisors where requiredCarry out site inspections, surveillance and auditsFollow up on actions identified through inspections and auditsLead and support accident and incident investigationsAnalyse H&S data to identify trends and areas for improvementDevelop lessons learned sessions, campaigns and improvement plansSupport the development and delivery of project inductionsPrepare and review H&S plans, procedures and method statementsMaintain accurate H&S records and documentationPrepare reports, presentations and project informationMonitor compliance with relevant project KPIsStop work where health and safety requirements are in question4. Experience required for this Senior Health and Safety Advisor role are:Extensive experience working within a health and safety roleExperience within the tunnelling industry is preferredRelevant senior-level H&S membership or qualifications, such as IOSH, NEBOSH, IEMA or CQIStrong understanding of ISO 9001, ISO 14001 and BS OHSAS 18001 standardsGood knowledge of Microsoft Office packages, including Outlook, Excel and WordCommercial and contractual awareness5. Desirable knowledge, skills and experience for this Senior Health and Safety Advisor role are:Experience leading health and safety teams or junior H&S AdvisorsExperience delivering H&S improvement plans and campaignsExperience managing accident and incident investigationsExperience within major tunnelling or infrastructure projectsKnowledge of Visio and Microsoft Project6. Package and Benefits of the Senior Health and Safety Advisor role:Salary: 65,000 - 70,000Job Type: PermanentLocation: London Learning and development opportunitiesPerformance review and appraisal processesOpportunity to work on major tunnelling and infrastructure projects7. How to apply for this Senior Health and Safety Advisor role:If you are interested in this Senior Health and Safety Advisor position, then please apply via this job board.For a confidential conversation about the role, please contact us directly.Discipline(s): Construction, Infrastructure & Built EnvironmentJob type: Permanent

Company Description Find out exactly what skills, experience, and qualifications you will need to succeed in this role before applying below. Noriker Power is a leading renewable energy technology integrator and developer, supporting the energy transition in the UK and Ireland. Since pioneering commercial, grid-scale battery projects over a decade ago, we have navigated complex market and regulatory environments with a technically skilled and entrepreneurial team that delivers development, engineering and project management services. We foster a collaborative, high- performance culture where team members are encouraged to take ownership, innovate, and directly influence the company's trajectory. Key Responsibilities: Plan, design, develop and deploy system controls code for BESS integration systems of all level electrical infrastructure. Collaborating, from design through to operations of large engineering projects, as part of a team responsible for SCADA architecture, coding and commissioning to deliver projects on time and in budget. Work closely with internal IT team to support networking infrastructure. Work closely with project managers and engineers to ensure project success. Requirements: Degree qualified in a STEM subject in a UK university. At least 3 year's experience in an engineering environment. Electrical / Power engineering experience would be ideal! Good working knowledge of programming languages such as Javascript, Golang, Labview, c++ or Python, with TCP/IP networking or front-end web development would be an advantage. You are a self-motivated individual with a sense of responsibility, and happy accepting your part in working towards a larger goal. Must be able to commute to Cheltenham, as this role is fully office-based. Benefits: Unique opportunities for career progression Enhanced company pension scheme and private medical insurance Part-time working applications will be considered Cycle to Work Scheme, secure bike storage and modern shower facilities Smart, modern workspace balances focused, quiet concentration with open collaborative team areas, and Cheltenham town centre location At Noriker, we're passionate about fostering inclusive workplaces where everyone can be themselves and contribute to the fullest of their ability. We believe in supportive teams and strong relationships where the focus is on everyone's contribution. xrnqpay We just want the best people to join us, stay with us, and contribute in their own unique way. Applicants must have the right to work in the UK. We are unable to offer visa sponsorship for this position.

Controls Engineer £55,000 - £65,000 + Overtime + Private Health insurance + Bonus Training + Progression + Early Friday Finish + International Travel Cheltenham Are you a Controls Engineer or similar looking for a new role with a market-leading international business that will invest in your development, upskill you in robotics and offer clear career progression? This position also provides fantastic company benefits, overtime to boost your earnings and opportunities for international travel. This company designs, builds and installs bespoke automation and control systems for industrial clients worldwide. They cover everything from robotic handling and conveyor systems to vision inspection and fully integrated PLC-controlled lines, they supply both standalone machines and complete turnkey automation solutions. This role is predominantly office-based, with international travel around 4-5 times per year to support machinery integration. You will design, programme and develop robotic solutions and control systems, before travelling to customer sites to assist with installation, integration and commissioning of the finished equipment. This role would suit a Control System Engineer or similar with a background in Control Systems/Robotics looking to join an expanding business looking to join a business offering great company benefits and the opportunity to travel. The Role Designing and Programming Control systems Onsite Installation and commissioning Project Management International Travel The Person Background in Control Systems/Robotics/Programming Commutable to Cheltenham Happy to travel internationally Reference BBBH26476B Robotics, Mechatronic, Design, Programmer, Integration Engineer, Designer, Controls engineer, Control Systems, Programming, PLC, Automation, Conveyor, Gloucester, Cheltenham, Bishops cleeves If you're interested in this role, click 'apply now' to forward an- -date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Location: Between Cheltenham & Tewkesbury, Gloucestershire Salary: £50,000-£80,000 OTE, depending on experience Job Type: Full-time, Permanent Travel: UK & International - approximately 40% Applicants must already have the legal right to work in the UK. Unfortunately, visa sponsorship is not available for this position. Workforce Group are working with a growing specialist engineering business that designs, builds and installs bespoke automation and control systems for customers across the UK and internationally. Due to continued growth and increasing demand for their highly engineered automation solutions, they are looking for an experienced Controls & Robotics Engineer to join their close-knit engineering team. This is an exciting opportunity for an engineer who enjoys working on bespoke automation projects, rather than repetitive production-line work. You will be involved throughout the project lifecycle, from initial design and programming through to installation, commissioning and customer handover, working on technically challenging automation projects across a range of industries. The role offers excellent exposure to PLC programming, robotics, HMI, SCADA, industrial networks and machine automation, alongside the opportunity to travel internationally to customer sites across Europe, the USA and Canada. If you're a hands-on Controls Engineer who enjoys solving complex problems, working independently and seeing your systems come to life on-site, this could be an excellent opportunity. Working alongside mechanical, electrical and controls engineers, you will take responsibility for designing, programming, integrating and commissioning bespoke automation systems. Your responsibilities will include: • Designing and programming PLC, HMI, SCADA and industrial network systems from scratch, • Programming and integrating industrial robots, • Developing control architectures and automation solutions alongside mechanical and electrical design teams, • Taking ownership of projects from concept and design through to build, commissioning and handover, • Installing, commissioning and testing machinery at customer sites, • Providing customer training and technical support, • Diagnosing faults and improving existing control and robotic systems, • Managing project priorities, technical issues and customer communication, • Working closely with customers, suppliers and internal engineering teams, • Supporting and mentoring other members of the engineering team, • Ensuring projects are delivered safely, efficiently and to a high standard We're looking for an experienced Controls & Robotics Engineer with a strong background in industrial automation. You should have experience with: • PLC programming using Allen-Bradley and/or Siemens, • HMI/touchscreen, SCADA and industrial network programming, • Industrial robotics programming and integration, • FANUC robots would be particularly advantageous, • Experience with #J-18808-Ljbffr

Project Manager to lead client‑facing delivery within our South Rail Systems Alliance portfolio, which has a growing pipeline of confirmed work. This role responds to expanding programme demands and while the current scope focuses on rail systems, we expect an increasing proportion of civils works as the schemes develop, requiring robust integration and interface management. This role will be based in Swindon with travel expected to Cardiff and Bristol. • Lead end-to-end delivery of complex rail systems projects, with growing civils integration, ensuring outcomes meet client requirements, safety standards, cost targets, and schedule commitments., • Serve as a trusted, client‑facing partner to build confidence, support co‑located working in Cardiff for Burns Station, and enable future pipeline growth., • Coordinate multidisciplinary teams (rail systems, civils, project controls, and EC) across locations to drive consistent performance and governance., • Act as the primary client interface, building strong relationships and trust through proactive communication and visible leadership., • Own integrated programme plans across rail systems and emerging civils scopes; manage baselines, risks, issues, and change., • Direct multidisciplinary teams across Swindon, Bristol (COLAS), and Cardiff, ensuring clear roles, responsibilities, and performance expectations., • Coordinate with Enterprise Capabilities in India and project controls teams to expand support and strengthen delivery capability across the Burns programme and wider SRSA portfolio., • Proven experience delivering complex rail projects as a Project Manager or Senior PM, with strong client‑facing leadership., • Demonstrated expertise in rail systems delivery with evidence of managing civils interfaces or multidisciplinary programmes., • Strong command of programme controls, governance, and reporting (schedule, cost, risk, change, and performance). Work with Us. Change the World. At AECOM, we’re delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. We are hiring a Senior Rail, metrics, Excellent communication, negotiation, and stakeholder management skills, with the ability to operate in co‑located, multi‑organisation environments. At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. To support this commitment, all newly hired employees are required to attend an in‑person Day 1 onboarding at an AECOM office location as a condition of employment. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long‑term condition, who meet the minimum/essential criteria for the role. As an Equal Opportunity Employer, we believe in each person's potential, and we'll help you reach yours. All your information will be kept confidential according to EEO guidelines. • Type: Full‑time, • Function: Project Management, • Experience level: Associate, • Industry: Construction #J-18808-Ljbffr

Ultra PCS is a leading developer of mission and safety critical equipment in the defence and aerospace industry. Our team of experts are at the heart of our success, which is why we are dedicated to fostering a safe working environment and a positive culture where every staff member feels valued and respected. We solve our customers' problems, providing engineering solutions to safety and mission critical challenges in the air and on the ground. Our solutions can be found in the latest military aircraft and vehicles, in civil aircraft, and in unmanned vehicles. We help to ensure our customers get to where they need to be safely, achieve their objectives and keep on going back. Wherever possible, we will consider a variety of working options to suit your lifestyle, whether that be hybrid home/office working, flexible working and part or full time employment. It's the 'innovating' and 'empowering' values that we ASPIRE to be. We welcome the challenge to work in new ways and have trust in you when getting the job done because we recognise, our business is our people. Eaton Aerospace Group Mission Systems Division (MSD) Precision Control Systems (PCS) has an opening for a Senior Engineering Manager located at the Cheltenham, UK facility. The Senior Engineering Manager position has direct reporting to the Head of Engineering. The primary function of this position is to manage the Mechanical Design and Development team and to provide support for the Critical Controls, Stores Ejection, and Data Processing value streams. This role manages engineering on new product development & introduction, research & development programs, and aftermarket programs working collaboratively with the program management and in-service support teams. This role is responsible for the delivery and deployment of resources into the development and support projects of the engineering department. In support of other Senior Engineering Managers (SEMs) and under the guidance of the Head of Engineering this role will provide a suitably qualified and experienced team to meet the quantifiable needs of the business. You will also effectively manage risk and provide technical expertise to aid the Director of Engineering Development in satisfying the project needs of the business. Management and executional engineering functions and activities for New Product Introduction, Internal Research and Development, and Aftermarket along with support of the In-Service Support team. Focus on on-time delivery of project activities in order to meet an OTIF (On Time in Full) delivery. Ensure scope of work, budgets and deadlines are clearly understood. Ensure timely and appropriate preventative and corrective actions are taken as needed and ensure the quality of technical work meets the satisfaction of external and internal customers. Responsible for the engineering bid estimate of Non-Recurring Costs (NRC) and engineering schedule. Deliver current projects, work packages and activities within +/-5% of the current agreed planned cost and schedule. Deliver future bids within +/-5% of the as bid cost and schedule. Be proactive in identifying areas of risk and propose ideas for de-risking to the project team for review and action. Ensure that the financial and human resource requirements necessary to complete all projects are identified and clearly communicated to the leadership team. Lead, motivate and develop an engineering team of the correct size and with the necessary skills to deliver the budget and strategic plan objectives. Strengthen talent within the company by recruiting, interviewing, hiring, mentoring new employees, create opportunities for the growth and development of the existing engineering team. Evaluate employee performance and provide additional coaching and support as needed. Ensure continuous improvement and alignment of business processes, creating a team-focused environment where all collaborate and execute successfully. Assure appropriate product documentation, design standards, and related material specifications are developed. Assure that product designs are competitive on a global basis with respect to quality, reliability and cost. Use best practices of robust design (Design for Six Sigma, DFSS) & promote the "analysis first" mindset. . Identify key engineering metrics, monitor performance and implement improvements accordingly. Maintain close liaison with customers for application reviews, developing new product requirements, and major modifications of existing products, prototype qualification test requirements and to resolve product performance deficiencies. Other duties as assigned. • Bachelor's degree in Engineering from an accredited institution is required., • Previous success in managing engineers in a leadership role, preferably for a minimum of 5 years., • 10 years of experience within aerospace or a high-tech industry with new produc #J-18808-Ljbffr

Salary up to £70K (subject to skills and experience) + fantastic benefits including company bonuses, car cash allowance, private medical cover and generous pension scheme. Designing award-winning products for our market-leading brands – Mira Showers, Rada and Recoup - is our lifeblood. We focus on investment; investing in the best technology and resources available and investing in each and every individual. Whether you arrive at our facilities in Cheltenham, Worcester or Hull, have a visit from a Service Engineer or pick up the phone to our Customer Service team, you’ll instantly see that, no matter our department or location, we all share the same cultural values at Kohler Mira. From day one you’re part of the Kohler Mira community – a collaborative, forward focused team with a shared pride in our work and commitment to delight our customers, develop innovative products and services and inspire our people. We're looking for an Advance Manufacturing Systems Manager to help shape the future of our manufacturing operations through innovation, technology and continuous improvement. In this role, you’ll be accountable for the effective leadership and management of an entire support function covering the Cheltenham site. Member of the senior leadership team for the Manufacturing function. Accountable for Advance Manufacturing Systems focused on: • Supporting the Business Manufacturing Strategy over a 3-year rolling timeline., • Deliver Senior Leadership focused initiatives and strategic improvements., • Pro‑active compliance and development of auto and manual manufacturing systems that achieve operational capability for Safety, Quality, Cost, Delivery and People (SQCDP)., • Achieving and maintaining targeted service levels and strategic improvements., • Work cross‑functionally with NPI, Manufacturing Engineering, Quality, Supply Chain, and Production teams., • Responsible for identifying, developing, and implementing manufacturing system solutions. From manual, low-cost automation to high capital automation., • Building a high performing, improvement culture through the coaching and development of the team (circa 14 controls and mechanical design associates). Responsibility for leading the team in accordance with established policies, procedures and objectives. Specifically: • Define and deploy the site automation strategy aligned to manufacturing and CI objectives, • Identify opportunities for automation across production processes (assembly, test, and material flow), • Develop and maintain a prioritised automation roadmap (low-cost vs capital), • Ensure alignment with site productivity, cost reduction, and capability goals, • Lead automated and assembly projects from concept through design, build, commissioning, and handover, • Ensure solutions are robust, scalable, and meet defined performance requirements, • Define equipment specifications, system architecture, and technical standards, • Manage suppliers and integrators to deliver compliant, high-quality systems, • Ensure clear ownership and support post-handover, • Work closely with NPI, Manufacturing Engineering, and Operations to integrate equipment into new product introductions, • Ensure automation solutions support manufacturing readiness, capability, and ramp‑up, • Provide input into process design for DFMA, assembly flows, • Support early life production to ensure stable and optimised operation, • Drive improvement in OEE through automation (availability, performance, quality), • Ensure systems are reliable, maintainable, and supported through lifecycle, • Embed TPM, diagnostics, and fault‑finding capability within systems, • Support root cause analysis and continuous improvement of automated processes, • Define and maintain automation standards (PLC, HMI, controls architecture, safety compliance), • Ensure all systems meet safety, quality, and regulatory requirements including delivery and governance of the equipment technical files. (CE / UKCA Marking etc.), • Support design reviews, buy-off, validation, and acceptance processes, • Ensure documentation, training, and knowledge transfer are completed, • Ensure systems are reliable, maintainable, and supported through lifecycle, • Embed TPM, diagnostics, and fault‑finding capability within systems, • Management & Development - People, • Lead, inspire, coach and develop the skills of direct reports., • Manage reports in line with company standards and policies., • Build capability in automation technologies across the wider organisation, • Develop skills matrices and succession plans aligned to future needs, • Promote a culture of innovation, ownership, and technical excellence, • Set objectives and monitor performance of direct reports in line with the Kohler Co Maximizing Performance process., • Represent Kohler co. in working groups; contribute to these and facilitate discussion locally on possible implications of new initiatives., • Ensure appropriate resourcing aligned to project complexity and portfolio demand., • Proven competence and previous success in an engineering leadership role, with significant exposure to automation and industry 4.0, typically 8+yrs experience within a manufacturing/assembly environment., • Experience and application of lean principles, manufacturing processes, automation, labour efficiency, capital planning, operations finance, and industrialisation., • Experience working within gated NPI / NPD frameworks, and knowledge of DFM/A principles., • Strong stakeholder management and communication skills., • Ability to assess risk and make balanced decisions under time and cost pressure., • Confident decision maker with strong delivery focus., • Strong leadership and people management skills., • Comfortable operating between strategic intent and hands‑on execution., • Collaborative leadership style with the ability to influence across functions., • Bachelor and/or Masters Degree in engineering, operations or related technical field. We empower each associate to #BecomeMoreAtKohler with a competitive total rewards package to support your health and wellbeing, access to career growth and development opportunities, a diverse and inclusive workplace, and a strong culture of innovation. With a genuine commitment to creating better tomorrows, we’re driving meaningful change in our mission to help people live gracious, healthy, and sustainable lives. In the UK, Kohler Mira Ltd. is made up of three market leading brands: Mira Showers, Rada Controls, and Recoup Where our brands differ in market position, they are equal in their commitment to design, innovation, and providing a single level of quality regardless of price. Kohler Mira is committed to diversity and inclusion to drive our business results and create a better future every day for our diverse associates, consumers, partners, and global communities. As an equal opportunities employer, it is Kohler Mira’s policy to recruit, hire, and promote qualified people in all job classifications without prejudice. If, as an individual with a disability, you require adjustments during the recruitment process, please contact . #J-18808-Ljbffr

Eaton Aerospace Group Mission Systems Division (MSD) Precision Control Systems (PCS) has an opening for a Senior Engineering Manager located at the Cheltenham, UK facility. The Senior Engineering Manager position has direct reporting to the Head of Engineering. The primary function of this position is to manage the Mechanical Design and Development team and to provide support for the Critical Controls, Stores Ejection, and Data Processing value streams. This role manages engineering on new product development & introduction, research & development programs, and aftermarket programs working collaboratively with the program management and in-service support teams. This role is responsible for the delivery and deployment of resources into the development and support projects of the engineering department. In support of other Senior Engineering Managers (SEMs) and under the guidance of the Head of Engineering this role will provide a suitably qualified and experienced team to meet the quantifiable needs of the business. You will also effectively manage risk and provide technical expertise to aid the Director of Engineering Development in satisfying the project needs of the business. • Management and executional engineering functions and activities for New Product Introduction, Internal Research and Development, and Aftermarket along with support of the In-Service Support team., • Focus on on-time delivery of project activities in order to meet an OTIF (On Time in Full) delivery. Ensure scope of work, budgets and deadlines are clearly understood., • Ensure timely and appropriate preventative and corrective actions are taken as needed and ensure the quality of technical work meets the satisfaction of external and internal customers., • Responsible for the engineering bid estimate of Non-Recurring Costs (NRC) and engineering schedule., • Deliver current projects, work packages and activities within +/-5% of the current agreed planned cost and schedule. Deliver future bids within +/-5% of the as bid cost and schedule., • Be proactive in identifying areas of risk and propose ideas for de-risking to the project team for review and action., • Ensure that the financial and human resource requirements necessary to complete all projects are identified and clearly communicated to the leadership team. Lead, motivate and develop an engineering team of the correct size and with the necessary skills to deliver the budget and strategic plan objectives., • Strengthen talent within the company by recruiting, interviewing hiring, mentoring new employees, create opportunities for the growth and development of the existing engineering team., • Evaluate employee performance and provide additional coaching and support as needed., • Ensure continuous improvement and alignment of business processes, creating a team-focused environment where all collaborate and execute successfully., • Assure appropriate product documentation, design standards, and related material specifications are developed. Assure that product designs are competitive on a global basis with respect to quality, reliability and cost., • Use best practices of robust design (Design for Six Sigma, DFSS) & promote the “analysis first” mindset., • Identify key engineering metrics, monitor performance and implement improvements accordingly., • Maintain close liaison with customers for application reviews, developing new product requirements, and major modifications of existing products, prototype qualification test requirements and to resolve product performance deficiencies., • Other duties as assigned., • Domestic and international travel required., • Bachelor’s degree in engineering from an accredited institution is required., • Previous success in managing engineers in a leadership role, preferably for a minimum of 5 years., • 10 years of experience within aerospace or a high-tech industry with new product development and sustaining support., • Advanced engineering degree or MBA preferred., • CEng certification preferred, • Experience in conducting competitive analyses and defining/executing business level strategy., • Proven track record of driving change and ability to develop and execute technology development plans. Experience working with the Defence and Major Prime Contractors., • Background with manufacturing methods, process improvement programs and procedures., • DFSS Greenbelt Certification, • Familiarity with Electronic Control, Data Systems, and Pneumatic systems and/or products is preferred., • Demonstrated leadership skills, experience with design processes, portfolio and program management skills, knowledge of customer strategies, successful new product introduction experience, creative/innovative thinking., • Competence in use of Microsoft Office products, • Excellent written and verbal communication skills, • Work in a matrix organization within a global virtual engineering organization, • Network divisional resources, • Develop productive working relationships with functions and organizations outside of Engineering, • Develop working relationships within the Aerospace engineering community, • Develop working relationships with customers, • Opportunity to work in a global, highly collaborative environment, • Challenging projects in dynamic collaborative team, • Strong focus on learning, development, and career progression, • Competitive compensation and benefits package, • A culture that promotes inclusion, accountability, and continuous improvement #LI-NK2 All positions may require participation in video and in-person interviews as part of the hiring process. All candidates will be evaluated based on job-related competencies, and all candidates’ privacy rights and data security will be protected in accordance with applicable laws. We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law. #J-18808-Ljbffr

A growing automation and engineering business is seeking an experienced Controls & Robotics Engineer to join its close-knit engineering team. The role will involve designing, programming, integrating, commissioning and supporting bespoke automation systems across manufacturing and packaging environments. This would suit an experienced controls engineer who is comfortable programming systems from scratch, working hands-on with PLCs and robotics, and taking projects through from initial design and development to installation, commissioning and customer handover. • Design and programme PLC, HMI, SCADA and industrial network systems from scratch., • Design, programme and integrate industrial robotic systems into automated machinery., • Develop control architectures and automation solutions alongside mechanical and electrical engineering teams., • Take ownership of automation projects from concept and design through to build, commissioning and handover., • Carry out installation, commissioning, testing and fault-finding at customer sites., • Service, troubleshoot and improve existing control and robotic systems., • Work directly with customers, suppliers and multidisciplinary engineering teams., • Provide customer training and technical support., • Manage project activities, priorities and technical risks., • Support and mentor other controls and automation engineers., • Ensure projects are delivered safely, effectively and to a high technical standard., • Proven experience within industrial controls, automation and robotics., • Strong PLC programming experience with Siemens and/or Allen-Bradley/Rockwell., • Experience programming HMI/touchscreens and SCADA systems., • Hands-on experience programming and integrating industrial robots — FANUC particularly desirable, although ABB, Kawasaki or Nachi experience is also relevant., • Good knowledge of industrial networks, particularly PROFINET and/or EtherNet/IP., • Experience working with automated machinery within a manufacturing environment., • Strong hands-on experience with installation, commissioning, servicing and fault-finding., • Experience working directly with customers, suppliers and wider engineering teams., • Ability to work independently, troubleshoot problems methodically and take ownership of projects., • A practical, flexible and hands-on approach to engineering., • Comfortable travelling regularly to customer sites, including international travel to Europe, USA and Canada., • Full UK driving licence., • Must already have the legal right to work in the UK — no sponsorship available., • FANUC robotics., • EPLAN electrical design., • Machine vision systems., • Plastics processing, container handling or packaging machinery., • Project management / technical ownership of automation projects., • Previous commissioning experience outside the UK. Location: Winchcombe, Gloucestershire Salary: £50k-£80k OTE Travel: Approximately 40% #J-18808-Ljbffr

Ultra PCS is a leading developer of mission and safety critical equipment in the defence and aerospace industry. Our team of experts are at the heart of our success, which is why we are dedicated to fostering a safe working environment and a positive culture where every staff member feels valued and respected. We solve our customers’ problems, providing engineering solutions to safety and mission critical challenges in the air and on the ground. Our solutions can be found in the latest military aircraft and vehicles, in civil aircraft, and in unmanned vehicles. We help to ensure our customers get to where they need to be safely, achieve their objectives and keep on going back. Wherever possible, we will consider a variety of working options to suit your lifestyle, whether that be hybrid home/office working, flexible working and part or full time employment. It’s the ‘innovating’ and ‘empowering’ values that we ASPIRE to be. We welcome the challenge to work in new ways and have trust in you when getting the job done because we recognise, our business is our people. Eaton Aerospace Group Mission Systems Division (MSD) Precision Control Systems (PCS) has an opening for a Senior Engineering Manager located at the Cheltenham, UK facility. The Senior Engineering Manager position has direct reporting to the Head of Engineering. The primary function of this position is to manage the Mechanical Design and Development team and to provide support for the Critical Controls, Stores Ejection, and Data Processing value streams. This role manages engineering on new product development & introduction, research & development programs, and aftermarket programs working collaboratively with the program management and in-service support teams. This role is responsible for the delivery and deployment of resources into the development and support projects of the engineering department. In support of other Senior Engineering Managers (SEMs) and under the guidance of the Head of Engineering this role will provide a suitably qualified and experienced team to meet the quantifiable needs of the business. You will also effectively manage risk and provide technical expertise to aid the Director of Engineering Development in satisfying the project needs of the business. • Management and executional engineering functions and activities for New Product Introduction, Internal Research and Development, and Aftermarket along with support of the In-Service Support team., • Focus on on-time delivery of project activities in order to meet an OTIF (On Time in Full) delivery. Ensure scope of work, budgets and deadlines are clearly understood., • Ensure timely and appropriate preventative and corrective actions are taken as needed and ensure the quality of technical work meets the satisfaction of external and internal customers., • Responsible for the engineering bid estimate of Non-Recurring Costs (NRC) and engineering schedule., • Deliver current projects, work packages and activities within +/-5% of the current agreed planned cost and schedule. Deliver future bids within +/-5% of the as bid cost and schedule., • Be proactive in identifying areas of risk and propose ideas for de-risking to the project team for review and action., • Ensure that the financial and human resource requirements necessary to complete all projects are identified and clearly communicated to the leadership team. Lead, motivate and develop an engineering team of the correct size and with the necessary skills to deliver the budget and strategic plan objectives., • Strengthen talent within the company by recruiting, interviewing, hiring, mentoring new employees, create opportunities for the growth and development of the existing engineering team., • Evaluate employee performance and provide additional coaching and support as needed., • Ensure continuous improvement and alignment of business processes, creating a team-focused environment where all collaborate and execute successfully., • Assure appropriate product documentation, design standards, and related material specifications are developed. Assure that product designs are competitive on a global basis with respect to quality, reliability and cost., • Use best practices of robust design (Design for Six Sigma, DFSS) & promote the “analysis first” mindset. ., • Identify key engineering metrics, monitor performance and implement improvements accordingly., • Maintain close liaison with customers for application reviews, developing new product requirements, and major modifications of existing products, prototype qualification test requirements and to resolve product performance deficiencies., • Other duties as assigned., • Experience in conducting competitive analyses and defining/executing business level strategy., • Familiarity with Electronic Control, Data Systems, and Pneumatic systems and/or products is preferred., • Demonstrated leadership skills, experience with design processes, portfolio and program management skills, knowledge of customer strategies, successful new product introduction experience, creative/innovative thinking., • Proven track record of driving change and ability to develop and execute technology development plans., • Advanced engineering degree or MBA preferred., • CEng certification preferred, • Experience working with the Defence and Major Prime Contractors., • Background with manufacturing methods, process improvement programs and procedures., • DFSS Greenbelt Certification, • Competence in use of Microsoft Office products, • Excellent written and verbal communication skills, • Work in a matrix organization within a global virtual engineering organization, • Network divisional resources, • Develop productive working relationships with functions and organizations outside of Engineering, • Develop working relationships within the Aerospace engineering community, • Develop working relationships with customers, • Domestic and international travel required Candidates must be able to work in the UK without restrictions in accordance with UK National Law and be prepared to successfully undertake an appropriate level of UK National Security Vetting according to UK Government National Security Vetting criteria. Ultra PCS is an equal opportunities employer that values diversity, inclusion, equity and equality. Underpinned by our values, behaviours, and policies, we want you to feel empowered to be your best and authentic self. We promote a workplace that welcomes people from all backgrounds and cultures; believing that this will increase our diversity of thinking, and ultimately ensure we continue delivering on our commitments to our customers. We do not discriminate based on race, religion, colour, national origin, gender identity, sexual orientation, age, marital status, veteran status, or disability status and welcome applications from all candidates. #J-18808-Ljbffr

Job Description Summary As a Test Systems Technical Lead, you will be responsible for the technical direction, definition, and delivery of test system solutions across Power Distribution and Controls programs. You will own the technical solution for your product/project area, ensuring that test systems meet Safety, Quality, customer, regulatory, and business requirements while supporting program Delivery and Cost objectives. Working as part of an Integrated Product Development Team (IPDT), you will lead the full test systems lifecycle from initial requirements capture through design, implementation, verification, release, and in-service support. You will demonstrate strong technical leadership, collaborate closely with Program and Engineering Project Managers, and provide guidance, coaching, and mentoring to engineers in the test systems team. • Test Systems Lifecycle Ownership Own the technical solution for test systems in your product/project area, ensuring alignment to customer, regulatory, and internal requirements. Lead the full Test Systems life cycle from concept and requirements definition through design, implementation, verification, formal release, and in-service support. Execute requirements, design, implementation, and verification using sound engineering principles, adhering to business standards, procedures, and program requirements. Ensure test equipment solutions are suitable for qualification, EMC, system verification, and production support, in line with DO-160, MIL-STD-461 and similar standards., • Technical Leadership Own the technical direction and accountability for test systems within your project to meet customer and derived requirements. Monitor and steer the technical solution, ensuring rigor in design and technical reviews for your test solution. Collaborate with the Designated Technical Authority (DTA) to ensure test system architectures and strategies are aligned to the overall product architecture. Engage SMEs and Chief Engineer’s Office as needed to resolve complex technical issues, de‑risk solutions, and ensure compliance with internal design guidelines. Ensure adherence to project plans, company and industry standards, and appropriate application of DTC (Design to Cost) and DFM (Design for Manufacture) / DFT (Design for Test) principles for test solutions., • Budget / Schedule / Scope Support Support the Control Account Manager (CAM) and EPM in delivering the technical solution to the agreed scope, schedule, and budget for your project. Protect against internal and external scope creep for the test system, identifying potential changes early and supporting mitigation. Clearly communicate technical expectations to the engineering team, including definition of done, entry/exit criteria, and required deliverables. Support work package planning (e.g., rolling wave planning, milestones, and estimates) and provide input to technical metrics to monitor progress and health of test activities. Provide timely technical inputs to program reviews, Toll Gates, forecast updates, and risk & opportunity reviews as requested by EPM/PM., • Cross-functional Collaboration and Customer Interface Act as the engineering interface to Program Management on test systems topics, clearly articulating technical direction, risks, and decisions. Liaise and interface with Systems, Hardware, Software, Manufacturing, Sustaining, Quality, Supply Chain, and Lab Operations to ensure integrated and robust test solutions. Support Program Manager and EPM in customer and certification discussions related to test system capability, coverage, readiness, and evidence. Ensure alignment and coordination with Manufacturing Program Manager (Launch Leader) and production test stakeholders regarding test strategy, manufacturability, and transition to production test environments., • Governance, Documentation, and Compliance Assure proper documentation of technical data generated for test systems in line with engineering policies, configuration control, and quality requirements. Ensure test system requirements, design artefacts, verification evidence, and configuration baselines are defined, maintained, and traceable. Participate as presenter or reviewer in technical, design, and program reviews (including CEO/DTA reviews where applicable), ensuring issues, risks, and lessons learned are captured and addressed. Support change management activities for test systems, providing technical impact assessments for scope/schedule changes and feeding into program BCRs as required., • People Leadership, Coaching and Behaviours Provide technical guidance and leadership to engineers and technicians working on test systems, ensuring clarity of priorities, deliverables, and standards. Coach, mentor, and train less experienced engineers, actively building technical capability and succession in the test systems community. Model and reinforce GE Leadership Behaviours – Act with Humility, Lead with Transparency, Deliver with Focus – and the supporting core values of Leading, Influencing, and Collaborating. Demonstrate and promote key team behaviours, including risk identification and mitigation, proactive information sharing, collaborative decision making, constructive feedback, problem solving, and driving Lean and cost out. Provide timely communications on significant technical issues or developments and use the defined escalation paths (Tech Lead/CAM → EPM → Subsection Manager/PMO → PM → senior leadership) where resolution is blocked or risks escalated. Degree in Electrical, Electronic, or Software Engineering, or equivalent knowledge and experience. Significant experience in test system design, development, and integration, including hardware/software integration for complex systems, ideally in aviation or other high integrity/safety‑critical environments. Demonstrated experience in qualification and EMC test equipment design, with working knowledge/awareness of DO‑160, MIL‑STD‑461 or equivalent environmental and EMC standards. Proven technical leadership experience delivering solutions to agreed scope, schedule, cost, and quality, preferably as a Technical Lead, CAM, or equivalent within a project environment. Strong problem‑solving and solution‑building skills, with the ability to break down complex problems, identify options, and drive to resolution. Excellent communication skills, able to clearly convey complex technical topics to engineering teams, program management, customers, and leadership. Evidence of independent and sound technical judgement, including identifying when to escape and when to seek DTA/CEO guidance. Demonstrable success in achieving and exceeding customer and program milestones for test system or product deliveries. Proven ability to deliver solutions on time, within budget, and to the required quality, operating effectively across TG3–TG9 project phases. Positive attitude, initiative, and proactiveness, with enthusiasm for continuous improvement, Lean thinking, and cost‑out in test solutions. Experience mentoring and developing engineers, including delegating technical work, providing feedback, and supporting career development. Experience with aircraft power distribution systems verification laboratories or similar system integration/verification environments. Ability to gather support from multiple stakeholders and influence cross‑functional teams, leveraging strong product and architecture understanding. Demonstrated collaboration across global, multi‑function teams, creating environments where customer‑centric creativity and outside‑in thinking are encouraged. The Test Systems Technical Lead is expected to: Lead complex, cross‑functional technical workstreams within programs, often spanning multiple products or platforms. Serve as the primary technical escalation point for test systems in their area, while using defined escalation paths for unresolved issues. Set high standards for safety, quality, and compliance, and actively drive continuous improvement in test strategies, methods, and tools. Act with humility, lead with transparency, and deliver with focus, always with unyielding integrity. GE Aerospace supports and encourages flexible working arrangements, where possible, and recognises the benefits to employees of having a positive work‑life balance. • Non‑contributory Pension, • Life Assurance, • Group income protection, • Private medical cover, • Holiday Hourly equivalent of 26 days, with flexible option to buy or sell, • Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that BPSS clearance cannot be obtained, you may not be eligible for the role and/or any offer of employment may be withdrawn on grounds of national security. Please see the link below for further details regarding the requirements for BPSS clearance: BPSS Right to Work Applications from job seekers who require sponsorship to work in the UK are welcome and will be considered alongside all other applications. However, under the applicable UK immigration rules as may be in place from time to time, it may be that candidates who do not currently have the right to work in the UK may not be appointed to a post if a suitably qualified, experienced and skilled candidate who does not require sponsorship is available to take up the post. For further information please visit the UK Visas and Immigration website. Relocation Assistance Provided: No At GE Aerospace, we invent the future of flight, lift people up, and bring them home safely. We are a world‑leading provider of jet engines, components, and integrated systems for commercial and military aircraft. At GE Aerospace, respect for people is core to our culture and commitment to FLIGHT DECK, our proprietary lean operating model. We attract, develop, and retain industry‑leading talent from all backgrounds and cultivate communities where people are respected and empowered to reach their fullest potential. For the people of GE Aerospace, their work isn't just a job. It's their passion and purpose. We work and win as one team, accountable to each other and our customers, and we are always finding a better way to climb higher together. We were meant to fly. #J-18808-Ljbffr

As a Test Systems Technical Lead, you will be responsible for the technical direction, definition, and delivery of test system solutions across Power Distribution and Controls programs. You will own the technical solution for your product/project area, ensuring that test systems meet Safety, Quality, customer, regulatory, and business requirements while supporting program Delivery and Cost objectives. Working as part of an Integrated Product Development Team (IPDT), you will lead the full test systems lifecycle from initial requirements capture through design, implementation, verification, release, and in-service support. You will demonstrate strong technical leadership, collaborate closely with Program and Engineering Project Managers, and provide guidance, coaching, and mentoring to engineers in the test systems team. • Test Systems Lifecycle Ownership Own the technical solution for test systems in your product/project area, ensuring alignment to customer, regulatory, and internal requirements. Lead the full Test Systems life cycle from concept and requirements definition through design, implementation, verification, formal release, and in-service support. Execute requirements, design, implementation, and verification using sound engineering principles, adhering to business standards, procedures, and program requirements. Ensure test equipment solutions are suitable for qualification, EMC, system verification, and production support, in line with DO-160, MIL-STD-461 and similar standards. • Technical Leadership Own the technical direction and accountability for test systems within your project to meet customer and derived requirements. Monitor and steer the technical solution, ensuring rigor in design and technical reviews for your test solution. Collaborate with the Designated Technical Authority (DTA) to ensure test system architectures and strategies are aligned to the overall product architecture. Engage SMEs and Chief Engineer’s Office as needed to resolve complex technical issues, de-risk solutions, and ensure compliance with internal design guidelines. Ensure adherence to project plans, company and industry standards, and appropriate application of DTC (Design to Cost) and DFM (Design for Manufacture) / DFT (Design for Test) principles for test solutions. • Budget / Schedule / Scope Support Support the Control Account Manager (CAM) and EPM in delivering the technical solution to the agreed scope, schedule, and budget for your project. Protect against internal and external scope creep for the test system, identifying potential changes early and supporting mitigation. Clearly communicate technical expectations to the engineering team, including definition of done, entry/exit criteria, and required deliverables. Support work package planning (e.g., rolling wave planning, milestones, and estimates) and provide input to technical metrics to monitor progress and health of test activities. Provide timely technical inputs to program reviews, Toll Gates, forecast updates, and risk & opportunity reviews as requested by EPM/PM. • Cross-functional Collaboration and Customer Interface Act as the engineering interface to Program Management on test systems topics, clearly articulating technical direction, risks, and decisions. Liaise and interface with Systems, Hardware, Software, Manufacturing, Sustaining, Quality, Supply Chain, and Lab Operations to ensure integrated and robust test solutions. Support Program Manager and EPM in customer and certification discussions related to test system capability, coverage, readiness, and evidence. Ensure alignment and coordination with Manufacturing Program Manager (Launch Leader) and production test stakeholders regarding test strategy, manufacturability, and transition to production test environments. • Governance, Documentation, and Compliance Assure proper documentation of technical data generated for test systems in line with engineering policies, configuration control, and quality requirements. Ensure test system requirements, design artefacts, verification evidence, and configuration baselines are defined, maintained, and traceable. Participate as presenter or reviewer in technical, design, and program reviews (including CEO/DTA reviews where applicable), ensuring issues, risks, and lessons learned are captured and addressed. Support change management activities for test systems, providing technical impact assessments for scope/schedule changes and feeding into program BCRs as required. • People Leadership, Coaching and Behaviours Provide technical guidance and leadership to engineers and technicians working on test systems, ensuring clarity of priorities, deliverables, and standards. Coach, mentor, and train less experienced engineers, actively building technical capability and succession in the test systems community. Model and reinforce GE Leadership Behaviours - Act with Humility, Lead with Transparency, Deliver with Focus – and the supporting core values of Leading, Influencing, and Collaborating. Demonstrate and promote key team behaviours, including risk identification and mitigation, proactive information sharing, collaborative decision making, constructive feedback, problem solving, and driving Lean and cost out. Provide timely communications on significant technical issues or developments and use the defined escalation paths (Tech Lead/CAM → EPM → Subsection Manager/PMO → PM → senior leadership) where resolution is blocked or risks escalated. Degree in Electrical, Electronic, or Software Engineering, or equivalent knowledge and experience. Significant experience in test system design, development, and integration, including hardware/software integration for complex systems, ideally in aviation or other high integrity/safety-critical environments. Demonstrated experience in qualification and EMC test equipment design, with working knowledge/awareness of DO-160, MIL-STD-461 or equivalent environmental and EMC standards. Proven technical leadership experience delivering solutions to agreed scope, schedule, cost, and quality, preferably as a Technical Lead, CAM, or equivalent within a project environment. Strong problem-solving and solution-building skills, with the ability to break down complex problems, identify options, and drive to resolution. Excellent communication skills, able to clearly convey complex technical topics to engineering teams, program management, customers, and leadership. Evidence of independent and sound technical judgement, including identifying when to upscale and when to seek DTA/CEO guidance. Demonstrable success in achieving and exceeding customer and program milestones for test system or product deliveries. Proven ability to deliver solutions on time, within budget, and to the required quality, operating effectively across TG3 - TG9 project phases. Positive attitude, initiative, and proactiveness, with enthusiasm for continuous improvement, Lean thinking, and cost-out in test solutions. Experience mentoring and developing engineers, including delegating technical work, providing feedback, and supporting career development. Experience with aircraft power distribution systems verification laboratories or similar system integration/verification environments. Ability to gather support from multiple stakeholders and influence cross-functional teams, leveraging strong product and architecture understanding. Demonstrated collaboration across global, multi-function teams, creating environments where customer‑centric creativity and outside‑in thinking are encouraged. • Lead complex, cross-functional technical workstreams within programs, often spanning multiple products or platforms., • Serve as the primary technical escalation point for test systems in their area, while using defined escalation paths for unresolved issues., • Set high standards for safety, quality, and compliance, and actively drive continuous improvement in test strategies, methods, and tools., • Act with humility, lead with transparency, and deliver with focus, always with unyielding integrity. GE Aerospace supports and encourages flexible working arrangements, where possible, and recognises the benefits to employees of having a positive work-life balance. At GE Aerospace we understand the importance of Total Reward. Our flexible benefits plan, called FlexChoice, gives you freedom, choice and flexibility in the way you receive your benefits, as well as giving you the opportunity to make savings where possible. As a new joiner to GE Aerospace we are pleased to be able to offer you the following as default in your benefit fund, which you then can tailor to meet your individual needs; • Non-contributory Pension, • Life Assurance, • Group income protection, • Private medical cover, • Holiday Hourly equivalent of 26 days, with flexible option to buy or sell Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that BPSS clearance cannot be obtained, you may not be eligible for the role and/or any offer of employment may be withdrawn on grounds of national security. Please see the link below for further details regarding the requirements for BPSS clearance: BPSS Applications from job seekers who require sponsorship to work in the UK are welcome and will be considered alongside all other applications. However, under the applicable UK immigration rules as may be in place from time to time, it may be that candidates who do not currently have the right to work in the UK may not be appointed to a post if a suitably qualified, experienced and skilled candidate who does not require sponsorship is available to take up the post. For further information please visit the UK Visas and Immigration website. Relocation Assistance Provided: No #J-18808-Ljbffr

Eaton Aerospace Group Mission Systems Division (MSD) Precision Control Systems (PCS) has an opening for a Senior Engineering Manager located at the Cheltenham, UK facility. The Senior Engineering Manager position has direct reporting to the Head of Engineering. The primary function of this position is to manage the Mechanical Design and Development team and to provide support for the Critical Controls, Stores Ejection, and Data Processing value streams. This role manages engineering on new product development & introduction, research & development programs, and aftermarket programs working collaboratively with the program management and in-service support teams. This role is responsible for the delivery and deployment of resources into the development and support projects of the engineering department. In support of other Senior Engineering Managers (SEMs) and under the guidance of the Head of Engineering this role will provide a suitably qualified and experienced team to meet the quantifiable needs of the business. You will also effectively manage risk and provide technical expertise to aid the Director of Engineering Development in satisfying the project needs of the business. • Management and executional engineering functions and activities for New Product Introduction, Internal Research and Development, and Aftermarket along with support of the In-Service Support team., • Focus on on-time delivery of project activities in order to meet an OTIF (On Time in Full) delivery. Ensure scope of work, budgets and deadlines are clearly understood., • Ensure timely and appropriate preventative and corrective actions are taken as needed and ensure the quality of technical work meets the satisfaction of external and internal customers., • Responsible for the engineering bid estimate of Non-Recurring Costs (NRC) and engineering schedule., • Deliver current projects, work packages and activities within +/-5% of the current agreed planned cost and schedule. Deliver future bids within +/-5% of the as bid cost and schedule., • Be proactive in identifying areas of risk and propose ideas for de-risking to the project team for review and action., • Ensure that the financial and human resource requirements necessary to complete all projects are identified and clearly communicated to the leadership team. Lead, motivate and develop an engineering team of the correct size and with the necessary skills to deliver the budget and strategic plan objectives., • Strengthen talent within the company by recruiting, interviewing, hiring, mentoring new employees, create opportunities for the growth and development of the existing engineering team., • Evaluate employee performance and provide additional coaching and support as needed., • Ensure continuous improvement and alignment of business processes, creating a team-focused environment where all collaborate and execute successfully., • Assure appropriate product documentation, design standards, and related material specifications are developed. Assure that product designs are competitive on a global basis with respect to quality, reliability and cost., • Use best practices of robust design (Design for Six Sigma, DFSS) & promote the “analysis first” mindset., • Identify key engineering metrics, monitor performance and implement improvements accordingly., • Maintain close liaison with customers for application reviews, developing new product requirements, and major modifications of existing products, prototype qualification test requirements and to resolve product performance deficiencies., • Other duties as assigned., • Domestic and international travel required., • Bachelor’s degree in engineering from an accredited institution is required., • Previous success in managing engineers in a leadership role, preferably for a minimum of 5 years., • 10 years of experience within aerospace or a high-tech industry with new product development and sustaining support., • Advanced engineering degree or MBA preferred., • CEng certification preferred, • Experience in conducting competitive analyses and defining/executing business level strategy., • Proven track record of driving change and ability to develop and execute technology development plans. Experience working with the Defence and Major Prime Contractors. • Background with manufacturing methods, process improvement programs and procedures., • Familiarity with Electronic Control, Data Systems, and Pneumatic systems and/or products is preferred., • Demonstrated leadership skills, experience with design processes, portfolio and program management skills, knowledge of customer strategies, successful new product introduction experience, creative/innovative thinking., • Competence in use of Microsoft Office products, • Excellent written and verbal communication skills, • Work in a matrix organization within a global virtual engineering organization, • Network divisional resources, • Develop productive working relationships with functions and organizations outside of Engineering, • Develop working relationships within the Aerospace engineering community, • Develop working relationships with customers, • Opportunity to work in a global, highly collaborative environment, • Challenging projects in dynamic collaborative team, • Strong focus on learning, development, and career progression, • Competitive compensation and benefits package, • A culture that promotes inclusion, accountability, and continuous improvement All positions may require participation in video and in-person interviews as part of the hiring process.All candidates will be evaluated based on job-related competencies, and all candidates’ privacy rights and data security will be protected in accordance with applicable laws. We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law. #J-18808-Ljbffr

Salary up to £70K (subject to skills and experience) + fantastic benefits including company bonuses, car cash allowance, private medical cover and generous pension scheme. We can offer you a lot in return! We empower each associate to #BecomeMoreAtKohler with a competitive total rewards package to support your health and wellbeing, access to career growth and development opportunities, a diverse and inclusive workplace, and a strong culture of innovation. With a genuine commitment to creating better tomorrows, we’re driving meaningful change in our mission to help people live gracious, healthy, and sustainable lives. Designing award-winning products for our market-leading brands – Mira Showers, Rada and Recoup - is our lifeblood. We focus on investment; investing in the best technology and resources available and investing in each and every individual. Whether you arrive at our facilities in Cheltenham, Worcester or Hull, have a visit from a Service Engineer or pick up the phone to our Customer Service team, you’ll instantly see that, no matter our department or location, we all share the same cultural values at Kohler Mira. From day one you’re part of the Kohler Mira community – a collaborative, forward focused team with a shared pride in our work and commitment to delight our customers, develop innovative products and services and inspire our people. We're looking for a Senior Manager, Quality to lead our Quality Assurance function at our Cheltenham manufacturing site. As a key member of the Manufacturing Senior Leadership Team, you will provide strategic leadership and direction to the Quality Assurance function across our Cheltenham site. This senior leadership role is accountable for driving quality excellence, ensuring compliance, fostering a culture of continuous improvement, and delivering robust quality standards that support our operational and business objectives. • Supporting the Business Manufacturing Strategy over a 3-year rolling timeline, • Deliver Senior Leadership focused initiatives and strategic improvements., • Pro‑active compliance and development of operational capability to achieve Safety, Quality, Cost, Delivery and People (SQCDP)., • Achieving and maintaining targeted Quality service levels and strategic improvements., • Building a high performing, quality assurance improvement culture through the coaching and development of the team (circa 19 Quality associates)., • Work cross‑functionally with NPD, Manufacturing Engineering, Purchasing, Supply Chain, and Production teams. Responsibility for leading the supplier and internal quality assurance teams in accordance with established policies, procedures and objectives. Specifically: • To act as strategic business leader for quality across all areas with specific focus on customer, supply chain and manufacturing quality., • To own and take leadership in developing and implementing plans to reduce the company Cost of Quality., • Act as focal point to represent Operations on quality issues and best practice quality development., • Lead Operations quality strategy. Work with relevant stakeholders to identify gaps in the current business quality processes and implement prioritized plans and policies targeting improvement., • Acts a focus point for Quality in the business. Represent the business to ensure our voice is heard on quality. Lead and lobby our business case as required., • Own and develop the company quality system and the related external third‑party systems accreditations., • Work with Kohler Quality teams to ensure our compliance with global corporate quality standards and policies. Work with Compliance Teams and internal/external stakeholders to ensure compliance with new and evolving Quality requirements., • Lead our plans to reduce our Cost of Poor Quality across all business areas. Monitor and report on our quality performance and quality system compliance status and undertake corrective and improvement action as necessary., • Own manufacturing and supplier quality improvement activity working with relevant stakeholders. Set improvement targets, monitor quality issues and drive improvements., • Work to ensure quality requirements are fully considered as part of our internal and external processes including management of change, training and supply chain processes., • Communicate project status, risks, and readiness clearly to senior stakeholders., • Define equipment, tooling, fixtures, and control system requirements for suppliers., • Define and control capital expenditure associated with quality assurance function., • Support and/or lead continuous improvement and Kaizen activity., • Support site reviews, leadership walkthroughs, and global engagement as required., • Lead, inspire, coach and develop the skills of direct reports.<, • Manage reports in line with company standards and policies., • Set objectives and monitor performance of direct reports in line with the Kohler Co Maximizing Performance process., • Represent Kohler co. in working groups; contribute to these and facilitate discussion locally on possible implications of new initiatives., • Ensure appropriate resourcing aligned to project complexity and portfolio demand., • Proven competence and previous success in a quality or engineering leadership role, typically 8+yrs experience within a manufacturing/assembly environment., • Experience and application of six sigma, quality systems, lean principles, manufacturing processes, automation, capital planning, operations finance and working within gated NPD frameworks., • Strong stakeholder management and communication skills., • Ability to assess risk and make balanced decisions under time and cost pressure., • Confident decision maker with strong delivery focus., • Strong leadership and people management skills., • Comfortable operating between strategic intent and hands‑on execution., • Collaborative leadership style with the ability to influence across functions., • Bachelor and/or Masters Degree aligned to operations or related technical field would be desirable. In the UK, Kohler Mira Ltd. is made up of three market leading brands: Mira Showers, Rada Controls, and Recoup Where our brands differ in market position, they are equal in their commitment to design, innovation, and providing a single level of quality regardless of price. Kohler Mira is committed to diversity and inclusion to drive our business results and create a better future every day for our diverse associates, consumers, partners, and global communities. As an equal opportunities employer, it is Kohler Mira’s policy to recruit, hire, and promote qualified people in all job classifications without prejudice. If, as an individual with a disability, you require adjustments during the recruitment process, please contact . #LI-RJ1 #LI-Onsite #J-18808-Ljbffr

Design Manager (Mechanical/Manufacturing) £55,000 - £60,000 + (£5,000 Bonus OTE) + Private Health insurance + Training + Progression + Early Friday Finish Cheltenham Do you have a background managing Mechanical Design teams? Are you looking for a new role with an expanding team allowing you to manage, shape and develop the future of a growing design team in a role that comes with a host of fantastic benefits such as health insurance for all of the family and a performance based annual bonus? This company designs, builds and installs bespoke manufacturing systems for a growing base of clients internationally. They take on projects in a range of sizes from standalone machines to complete turnkey automation solutions. This is a hands-on management position where you will be office-based, designing and overseeing a team of designers. You will liaise between teams, review and manage the performance of the wider team, ensure KPIs are met, and oversee the successful delivery of projects. This role would suit a Design Manager or similar with a mechanical background looking to join an expanding business looking to join a business offering great company benefits and bonuses. The Role Bespoke Mechanical Design Managing team performance and workload Employee reviews Project delivery The Person Background Mechanical Design and team management Seeking an office based management role Reference BBBH27421 Robotics, Mechatronics, Design, Mechanical Design Manager, PLC, Automation, Controls, Design Manager, Manufacturing Manager, Design Manufacturer, Lead Design Engineer, Gloucester, Cheltenham, Bishops cleeve If you're interested in this role, click 'apply now' to forward an- -date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Join the Growth Story at Envitia Envitia operates at the heart of the UK's most sensitive and high-profile operations. Our approach is entirely mission-focused, enabling customers to see more, decide faster, and act with confidence across complex domains. We deliver situational awareness and information advantage across C5ISR, fusing cyber, geospatial, and kinetic data into an operational picture. This transforms fragmented data into a shared understanding of the battlespace, delivering actionable insight when it matters most. Our solutions are secure-by-design, built from the ground up to protect sensitive information and ensure resilience in contested environments. We simplify complex heterogeneous data sources into a rich picture of fused intelligence, providing a digital backbone that underpins success. We operate as small teams delivering fast value, blending deep technical expertise with agile methods to deliver measurable outcomes. Every engagement focuses on capability, clarity, and confidence for those who protect the nation. A career with Envitia enables you to work with mission driven innovation. We're thrilled to announce that Envitia has been named one of Sunday Times Top 100 Medium-Sized Companies to Work For in 2025 - a prestigious recognition that highlights our commitment to creating an outstanding workplace where innovation, collaboration, and personal growth thrive. As a DevOps / Platform Engineer, you will design, build and operate secure cloud and platform capabilities within classified government environments. Working across AWS and cloud-native technologies, you will play a key role in delivering reliable, scalable and secure platforms that underpin mission-critical digital services. You'll operate within multi-disciplinary Agile teams, collaborating closely with software engineers, test engineers, architects, SRE specialists and mission stakeholders to ensure robust, production-grade delivery. This role is suited to someone who thrives in complex, secure environments and enjoys working across infrastructure automation, CI/CD and live service support, with a strong focus on reliability and continuous improvement. Typical responsibilities include: • Building and maintaining secure DevSecOps pipelines to support continuous delivery, • Developing Infrastructure as Code and automated platform capabilities, • Supporting AWS-based environments, including Kubernetes, OpenShift, EKS and ECS, • Implementing observability, monitoring, logging and alerting for live services, • Supporting SRE practices, cloud migration activities and production platform operations, • Design, implement and maintain secure CI/CD pipelines to support efficient, automated software delivery, • Develop and manage cloud-native infrastructure using AWS and Infrastructure as Code (e.g. Terraform, CloudFormation, Ansible), • Support containerised platforms and environments, including Kubernetes, OpenShift, EKS and ECS, • Embed security controls, quality gates and compliance checks into DevSecOps workflows, • Implement observability, monitoring, logging and alerting to support reliable live services, • Contribute to SRE practices, improving service reliability, performance and operational resilience, • Automate build, deployment and platform processes to reduce manual overhead and improve release confidence, • Collaborate within Agile teams, supporting delivery, troubleshooting and continuous improvement, • Provide technical guidance on platform engineering, cloud and deployment best practices, • Support production environments, including incident resolution, environment management and release readiness, • Experience working within the UK Security & Intelligence, defence or other secure government environments, • Strong knowledge of cloud, platform engineering and DevSecOps practices, with a focus on secure, automated delivery, • Experience with AWS and container platforms such as Kubernetes, OpenShift, EKS or ECS, • Proficiency in Infrastructure as Code and automation tooling (e.g. Terraform, CloudFormation, Ansible or similar), • Experience building and maintaining CI/CD pipelines, including automated build, test, deployment and release processes, • Familiarity with security integration, quality gates and compliance controls within delivery pipelines, • Experience implementing observability practices, including monitoring, logging, alerting and service metrics, • Understanding of SRE principles, including reliability engineering, incident management and continuous improvement, • Awareness of secure deployment, compliance requirements and operational security best practices The successful candidate must hold a current high level security clearance. It is anticipated the role will require up to 80% (4d/wk) onsite working at client locations - Cheltenham, London, Manchester (based on project requirements). At Envitia, we believe that our greatest asset is our talented and dedicated team. We are committed to fostering a work environment where every employee feels valued, supported, and motivated to excel. As part of this commitment, we offer a comprehensive range of benefits designed to enhance both your professional and personal well-being. • Annual Leave: 25 days plus your birthday off. You will have the ability to buy and sell 5 days holiday to work around your needs., • Private Healthcare Coverage: Our health plan is tailored to meet the diverse needs of our employees with additional levels for family if required., • Training & Skills Development: Stay ahead in your career with ongoing training opportunities and skill development initiatives tailored to your evolving needs., • Fitness Reimbursement: We encourage an active lifestyle. Our fitness reimbursement program helps you stay fit by covering a portion of your gym memberships or fitness-related expenses., • Life Assurance: Gain peace of mind with extensive life insurance coverage that ensures financial protection for you and your loved ones., • Pension Contribution: Plan for your future with our pension options. We provide resources and support to help you build a secure financial foundation., • Perkbox Subscription: Enjoy exclusive discounts on a variety of products and services. From technology to entertainment, we've partnered with various businesses to bring you special perks., • Internal Reward Schemes: Be rewarded for your exceptional contributions through our employee recognition initiatives that celebrate your achievements., • Community Engagement & Volunteer Opportunities: Contribute to meaningful causes with company-sponsored volunteer programs, fostering a sense of community and social responsibility. At Envitia, we celebrate diversity and are committed to creating an inclusive environment for all employees. We welcome applicants from all backgrounds and walks of life. We believe that our strength lies in our differences, and we are dedicated to fostering a workplace where everyone feels valued, respected, and empowered. We encourage applications from people of all abilities, ages, genders, sexual orientations, races, ethnicities, and religions. We strive to support a culture of inclusion, accessibility, and work-life balance. If you require any accommodations during the application or interview process, please let us know. #J-18808-Ljbffr

At IBM Consulting UK FutureNow, you’ll build a career at the forefront of hybrid cloud and AI, working with leading clients across the public and private sectors. You’ll collaborate with top industry professionals, gain hands on experience with cutting edge technologies, and deliver solutions that create real business impact. From day one, you’ll work on meaningful, high profile programmes that stretch your skills and accelerate your growth. We invest heavily in you—supporting continuous learning, in demand skills development, and long term career progression. You’ll thrive in a flexible, inclusive environment that values curiosity, encourages reinvention, and recognises what makes you unique. We offer: • Tools and policies to support your work-life balance from flexible working approaches, sabbatical programs, paid paternity leave, maternity leave and an innovative maternity returners scheme, • More traditional benefits, such as 25 days holiday (in addition to public holidays), private medical, dental & optical cover, online shopping discounts, an Employee Assistance Program, life assurance and a group pension plan through salary sacrifice.Your role and responsibilities As a Senior AWS Infrastructure Engineer, you’ll use your deep technical expertise to design, build, and support secure, scalable infrastructure environments across both cloud and on-premise platforms. Working within a highly collaborative technical team, you’ll play a key role in delivering resilient Linux-based infrastructure solutions that support mission-critical services for public sector and defence customers, ensuring compliance, security, and operational excellence across highly regulated environments. Responsibilities: • Lead the design, implementation, and support of secure AWS infrastructure platforms with a strong focus on Linux systems, enterprise infrastructure services, and cloud-native best practices, • Design and manage AWS services, and cloud-native best practices, • Design and manage AWS services including EC2, VPCs, IAM, Route53, CloudWatch, S3, EBS, Load Balancers, Auto Scaling, and backup/recovery solutions in line with public sector and defence security requirements, • Manage and optimise Linux server environments, ensuring high availability, hardening, patching, performance, and compliance with security standards and operational policies, • Support and maintain core infrastructure technologies including networking, middleware, DNS, VPNs, monitoring, logging, and enterprise tooling, • Collaborate with engineering and delivery teams to integrate AWS infrastructure solutions into CI/CD pipelines and operational support models, • Contribute to infrastructure automation initiatives using Infrastructure as Code (IaC) and configuration management tooling such as Terraform, Ansible, and CloudFormation, • Support containerised workloads and orchestration platforms including Kubernetes, Docker, and orchestration platforms including Kubernetes, Docker, and CRI-O across secure and scalable environments, • Implement and support AWS security best practices, including IAM policies, encryption, network segmentation, logging, including IAM policies, encryption, network segmentation, logging, auditing, and vulnerability remediation, • Monitor infrastructure health, availability, security, and capacity using enterprise monitoring and logging platforms such as Splunk and CloudWatch, • Support disaster recovery, backup, business continuity, and resilience strategies across AWS and hybrid infrastructure environments, • Mentor junior engineers and contribute to technical standards, operational documentation, and continuous improvement initiatives, • Contribute to infrastructure strategy, operational roadmaps, cloud migration, and platform modernisation programmes within regulated public sector and defence environments Join our team and play a key role in delivering scalable, secure, and resilient AWS infrastructure solutions that support critical business operations and long-term growth. We’re looking for someone who enjoys solving complex infrastructure challenges, has strong AWS and Linux expertise, and is passionate about building reliable, efficient platforms that deliver real business value. Required education None Preferred education Bachelor's Degree Required technical and professional expertise • Strong experience administering and troubleshooting enterprise Linux environments, • Broad infrastructure knowledge across Linux, Windows, networking, middleware, and systems integration, • Proven experience delivering resilient infrastructure solutions within complex enterprise environments, • Strong knowledge of Infrastructure as Code (IaC) provisioning and automated environment deployment using Terraform and related automation tools., • Experience managing Kubernetes, Docker, and container runtime platforms such as CRI-O, • Understanding of cloud and hybrid infrastructure models, including AWS platforms, • Familiarity with monitoring, including AWS platforms, • Familiarity with monitoring, logging, and operational tooling including Splunk, • Experience with infrastructure performance analysis, system health monitoring, and operational best practices, • Excellent communication, leadership, and problem-solving skills This role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). Additional National Security Vetting (NSV) controls may apply, including Security Check (SC) or Developed Vet Security Vetting (NSV) controls may apply, including Security Check (SC) or Developed Vetting (DV) clearance eligibility. Preferred technical and professional experience • Extensive certification in AWS Administration, • Familiarity with cloud-native architecture and deployment models, • Knowledge of container orchestration best practices, • Experience with monitoring tools and key metrics (SLA, services health), • Understanding of performance measurement tools and code quality metrics. Desirable Certifications • Red Hat Certified Engineer (RHCE) IBM Consulting is IBM’s consulting and global professional services business, with market leading capabilities in business and technology transformation. With deep expertise in many industries, we offer strategy, experience, technology, and operations services to many of the most innovative and valuable companies in the world. Our people are focused on accelerating our clients’ businesses through the power of collaboration. We believe in the power of technology responsibly used to help people, partners and the planet. In a world where technology never stands still, we understand that, dedication to our clients success, innovation that matters, and trust and personal responsibility in all our relationships, lives in what we do as IBMers as we strive to be the catalyst that makes the world work better. Being an IBMer means you’ll be able to learn and develop yourself and your career, you’ll be encouraged to be courageous and experiment everyday, all whilst having continuous trust and support in an environment where everyone can thrive whatever their personal or professional background. Our IBMers are growth minded, always staying curious, open to feedback and learning new information and skills to constantly transform themselves and our company. They are trusted to provide on-going feedback to help other IBMers grow, as well as collaborate with colleagues keeping in mind a team focused approach to include different perspectives to drive exceptional outcomes for our customers. The courage our IBMers have to make critical decisions everyday is essential to IBM becoming the catalyst for progress, always embracing challenges with resources they have to hand, a can-do attitude and always striving for an outcome focused approach within everything that they do. Are you ready to be an IBMer? IBM’s greatest invention is the IBMer. We believe that through the application of intelligence, reason and science, we can improve business, society and the human condition, bringing the power of an open hybrid cloud and AI strategy to life for our clients and partners around the world. Restlessly reinventing since 1911, we are not only one of the largest corporate organizations in the world, we’re also one of the biggest technology and consulting employers, with many of the Fortune 500 companies relying on the IBM Cloud to run their business. At IBM, we pride ourselves on being an early adopter of artificial intelligence, quantum computing and blockchain. Now it’s time for you to join us on our journey to being a responsible technology innovator and a force for good in the world. IBM is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, neurodivergence, age, or other characteristics protected by the applicable law. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status. IBM wants you to bring your whole self to work and for you this might mean the ability to work flexibly. If you are interested in a flexible working pattern, please talk to our recruitment team to find out if this is possible in the current working environment. Job Title Senior AWS Infrastructure Engineer - eSC or eDV Clearance Required Job ID 128376 City / Township / Village State / Province Gloucestershire Country United Kingdom Work arrangement Hybrid Area of work Software Engineering Employment type Regular Position type Professional Up to 80% or 4 days a week (home on weekends - based on project requirements) Company (8660) IBM United Kingdom Limited Shift General (daytime) Is this role a commissionable/sales incentive based position? #J-18808-Ljbffr

Purpose of the Role: As a Project Systems Manager, you will lead the information management team on our new major highways project, the M5J10 in Cheltenham. You will set up the project Common Data Environment (CDE) and core systems, and support compliance with client requirements. You will implement information management processes and controls according to Galliford Try BMS and contract specifications, ensuring that project documentation is accurate, up-to-date, and accessible to all users through systems like Viewpoint and Field View. We welcome applications from people with a range of backgrounds and experiences. The ideal candidate will have experience in BIM and information management within construction, strong communication and organizational skills, and a careful attention to detail. Experience with Viewpoint and Field View is desirable but not essential. What You Will Be Doing: • Serve as the main point of contact with the client’s Information Management/BIM team., • Coordinate, assure, and implement BIM requirements according to the Employer Information Requirements (EIR) and BIM Execution Plan (BEP)., • Support adherence to company and project information management processes (e.g., IMP, BEP)., • Promote best practices and compliance in information management across projects., • Work with the Central Support Team to align projects with the Business Management System (BMS)., • Supervise information management teams to ensure information is organized, accurate, and available across CDEs., • Build collaborative relationships with project teams and business unit support teams., • Provide guidance, training, and support for users of core systems, both internally and externally. About You: • Experience with a main contractor and familiarity with BIM principles, the ISO 19650 standard, and BIM Framework., • Ability to implement client EIR and BEP requirements at the project level., • Strong understanding of document control processes and technical configurations within systems., • Relevant degree or equivalent experience in information management or a related field., • Excellent communication skills, with the ability to work effectively at all organisational levels., • Confident using IT, including Microsoft applications, reporting tools, and managing multiple priorities., • Open to learning and adapting to new systems and processes. What We Can Offer in Return: With an impressive order book of over £4.1 billion we are one of the industry’s leading principal contractors, affording you the opportunity to work on some of the UK’s most exciting projects, offering stability and the chance to stretch your capabilities and realise long‑held career goals. You will be joining diverse teams working at a high professional level with exceptional commitment. With an ambitious strategy, we’re poised for further growth and success. We are committed to maintaining the physical and mental wellbeing of all our people through our ‘Be Well’ programme which offers discounts on certain products, advice and support for a range of issues. We invest in high‑quality training for employees of all levels, from our leadership development framework to our apprenticeship programmes. Through our Career Paths initiative, individuals receive tailored training and support to fulfil their potential. Our Benefits: • Generous holiday entitlement, increasing with years of service, plus the opportunity to purchase further holidays., • A wide range of corporate discounts., • Cycle to Work schemes., • Competitive family leave policy., • Regular Save as You Earn share purchase scheme., • Private medical scheme options for all salaried employees and an employee assistance programme with free 24/7 support., • Paid yearly membership to one recognised professional association relevant to your role. For more information on this role or to enquire about other positions available within our business, please contact Jenny Reid – . We encourage you to apply whether you meet every requirement; we are committed to building a diverse, inclusive and authentic workplace. A full job description for this role is available upon request. As a Disability Confident employer, we offer an interview to any candidate with a long‑term health condition or disability that meets the essential criteria for the advertised position. Please contact the Resourcing Partner listed within the job advert if you believe this applies to you. #J-18808-Ljbffr

We are looking for a Senior Account Manager, experienced with PM software and/or project controls software, specifically those tools used to manage and control the delivery of capital engineering and construction projects and the associated cost, earned value, risk, contracts etc. Knowledge of proje