Electrical engineer jobs in Springfield, MassachusettsCrear alertas

Job Description Job Summary Dennis Group’s Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities • Execute all tasks necessary to complete the engineering on a project for design through execution with minimal support, • Developing process design basis and select unit operations, • Develop operation specifications, • Coordinate with other project disciplines (engineers, designers, architects, etc.), • Prepare process flow and piping and instrumentation diagrams, • Create process flow diagrams, • Prepare mass and energy balances, • Size and specify process and process utility equipment, • Equipment procurement and bid evaluation, • Assist project management with the development of project scope, budget and schedule for all process related work, • Help to coordinate the schedules and work of contractors for process equipment installation, • Prepare preliminary sub-contractor scope of work, • Work with clients, vendors, and suppliers to develop cost estimates and proposals, • Write proposals, negotiate agreements, trouble-shoot client issues, • Update drawings provided by senior engineers to verify corrections, • Compile information for client presentations, shop drawings review, and contract administration for the design of power, process, pipeline, etc., • Take on lead process engineer on specific projects and be the client main process point of contact, • Generate requirements for equipment performance, • Collaborate with Project Management, design team, CAD department, vendors and clients to determine needs and solutions for continuous processing/ packaging systems and to develop specifications., • Provide client assumptions on supply recommendations, • Develop process and instrumentation drawings (P&IDs) and create review of layout drawings, • Oversee process and utility equipment installations, • Provide onsite construction start-up and commissioning support, • Perform onsite audits and surveys of the facilities and equipment, • Research processing engineering best practices, • Support talent growth within our organization, • Assist with interviewing and hiring new team members, • Handle complex issues and tasks with minimal supervision and advise subordinate team members on solutions to issues they encounter., • Bachelor’s degree in chemical or process engineering., • 8-11 years of work experience developing process designs for food and beverage processing facilities, • 8-11 years of work experience preparing process flow diagrams and P&IDs, • 8-11 years of work experience sizing and specification of process and process utility equipment., • 8-11 years of work experience developing project scope, budget and process related work schedules, • Work experience with professional services, process engineering, and food and beverage firms is a plus, • Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations, • Proficiency with MS Office, MS Project, and AutoCAD, • Excellent oral and written communication skills with proven client interaction and experience, • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Job Summary Dennis Group’s Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities • Developing process design basis and select unit operations, • Develop operation specifications, • Coordinate with other project disciplines (engineers, designers, architects, etc.), • Preparing process flow and piping and instrumentation diagrams, • Create process flow diagrams, • Preparing mass and energy balances, • Sizing and specification of process and process utility equipment, • Equipment procurement and bid evaluation, • Assisting project management with the development of project scope, budget and schedule for all process related work, • Helping to coordinate the schedules and work of contractors for process equipment installation, • Prepare preliminary sub-contractor scope of work, • Work with clients, vendors, and suppliers to develop cost estimates and proposals, • Write proposals, negotiate agreements, trouble-shoot client issues, • Update drawings provided by senior engineers to verify corrections, • Compile information for client presentations, shop drawings review, and contract administration for the design of power, process, pipeline, etc., • Take on lead process engineer on specific projects and be the client main process point of contact, • Generate requirements for equipment performance, • Collaborates with Project Management, design team, CAD department, vendors and clients to determine needs and solutions for continuous processing/ packaging systems and to develop specifications., • Provide client assumptions on supply recommendations, • Develop process and instrumentation drawings (P&IDs) and create review of layout drawings, • Overseeing process and utility equipment installations, • Provide onsite construction start-up and commissioning support, • Perform onsite audits and surveys of the facilities and equipment, • Researching processing engineering best practices, • Supporting talent growth within our organization, • Bachelor’s degree in chemical or process engineering., • 4-7 years of work experience developing process designs for food and beverage processing facilities, • 4-7 years of work experience preparing process flow diagrams and P&IDs, • 4-7 years of work experience sizing and specification of process and process utility equipment., • 4-7 years of work experience developing project scope, budget and process related work schedules, • Work experience with professional services, process engineering, and food and beverage firms is a plus, • Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations, • Proficiency with MS Office, MS Project, and AutoCAD, • Excellent oral and written communication skills with proven client interaction and experience, • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Dennis Group’s Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities • Develop process design basis and select unit operations., • Develop operation specifications., • Coordinate with other project disciplines (engineers, designers, architects, etc.), • Prepare process flow and piping and instrumentation diagrams, • Create process flow diagrams., • Prepare mass and energy balances, • Size and specify process and process utility equipment, • Equipment procurement and bid evaluation., • Assist project management with the development of project scope, budget, and schedule for all process related work, • Help to coordinate the schedules and work of contractors for process equipment installation., • Work with clients, vendors, and suppliers to develop cost estimates and proposals., • Provide client assumptions on supply recommendations., • Develop process and instrumentation drawings (P&IDs), • Oversee process and utility equipment installations, • Provide onsite construction start-up and commissioning support., • Research process engineering best practices, • Junior or Senior pursuing a Bachelor’s degree in Chemical Engineering or related field., • Familiarity with process flow diagrams and P&IDs is a plus., • Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations., • Experience with MS Office, MS Project, and AutoCAD., • Past process experience in food and beverage, pharmaceutical, or other sanitary environments is a plus., • Have a motivated and results orientated attitude., • GPA: 3.0 or above, • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description As a design/build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s Automation & Controls Engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our Automation & Controls Engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities are required for this role. Typical responsibilities include, but not limited to: Responsibilities • Handle basic issues and problems and refer more complex issues to higher-level engineer, • Design and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems., • Automate manufacturing processes through the use of instrumentation or controls systems., • Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc., • Develop new PLC applications, interfaces, or embedded controls, • Develop new or modify existing set-up and commissioning of new facilities or upgrading of existing facilities, • Design, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc., • Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc., • Specify, procure, configure, and troubleshoot controls hardware and field instrumentation, • Troubleshoot and resolve malfunctions and make recommendations that will improve efficiency or quality of operations, • Develop bid documentation for Electrical, Automation, and Low Voltage (network, security) vendors, • Document specifications and operating procedures, • Interface and manage installation contractors during construction, • Research Automation & Controls materials and best practices, • Junior or Senior pursuing a Bachelor’s degree in Electrical Engineering or a related field., • Allen Bradley/Rockwell, Siemens, GE Fanuc, Honeywell Systems familiarity., • Visual Basic, SQL, MS ACCESS Database programming skills a plus., • Design and implement process network infrastructure (Ethernet, Device Net, Control Net, ProfiBus etc)., • Database programming skills a plus., • Proficiency with MS Office and AutoCAD Required, • Must meet travel requirement - you will spend significant time in our client's facilities during installation and startup/commissioning/qualification phases of a project – 35% to 50% of any given time of the year., • Prolonged periods sitting at a desk and working on a computer., • Prolonged periods of standing and walking during installation, commissioning, and startup. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Dennis Group’s Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities • Develop process design basis and select unit operations, • Develop operation specifications, • Coordinate with other project disciplines (engineers, designers, architects, etc.), • Prepare process flow and piping and instrumentation diagrams, • Create process flow diagrams, • Prepare mass and energy balances, • Size and specify process and process utility equipment, • Equipment procurement and bid evaluation, • Assist project management with the development of project scope, budget and schedule for all process related work, • Help to coordinate the schedules and work of contractors for process equipment installation, • Work with clients, vendors, and suppliers to develop cost estimates and proposals, • Provide client assumptions on supply recommendations, • Develop process and instrumentation drawings (P&IDs), • Oversee process and utility equipment installations, • Provide onsite construction start-up and commissioning support, • Research process engineering best practices, • Bachelor’s degree in Chemical or Process Engineering., • 0-3 years of work experience or schooling developing process designs, • 0-3 years of work experience or schooling preparing process flow diagrams and P&IDs, • 0-3 years of work experience or schooling sizing and specifying process and process utility equipment., • 0-3 years of work experience or schooling developing project scopes, budgets and process-related work schedules, • Co-op, intern or work experience with professional services, process engineering, and food and beverage firms is a plus, • Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations, • Proficiency with MS Office, MS Project, and AutoCAD, • Excellent oral and written communication skills with proven client interaction and experience, • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Job Summary The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities • Designing electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities., • Documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc., • Maintains project document organization, • Manage time and meet commitments, • Understands Ohms Law, AC/DC, Electric and magnetic fields, • Understands power system theory – 3-phase vector math, power factor, symmetrical components, • Understands capacitors, inductors, and resonance, • Designing lighting for food processing spaces, including lighting calculations for emergency and inspection lighting level needs. Coordinating fixture placement/mounting with other trades., • Designing fire alarm systems per NFPA 72, 101, and local building code., • Code expertise – NEC, NFPA 72/101/, IBC, • Specify means and methods, • Specify other common work – grounding, start-up, LV & MV Cables, • Specify equipment, • Designing low voltage systems such as LAN, phones, PA, Wi-Fi, access control, cameras, etc., • Create power plans, • Create power one line and panel schedules, • Define fire alarm requirements per IBC and NFPA 101, • Define Low Voltage Systems, • Review scope with client – create and manage needs list, • Producing bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications., • CAD – add 2D & 3D devices to Xrefs, • Procuring long lead light fixtures and power distribution equipment such as switchgear, switchboards, panelboards, transformers, MCC’s, generators, variable speed drives, and UPS’s., • Transformer configurations, • Perform short circuit calculations identifying deficiencies or series ratings, • Estimate weights of main tray/trapezes and equipment needing support, • Assist in managing electrical bid process for clients, observing construction, and assisting with startup., • Project planning and feasibility studies., • Actively participating in and supporting department-wide standard development, updates, and maintenance., • Researching electrical building/power materials and best practices, • Bachelor of Science in Electrical Engineering or related field, • 4-7 years of work experience in electrical systems for building power., • 4-7 years of work experience in designing lighting, fire alarm systems, and low voltage systems for building spaces, including lighting calculations, and coordinating fixture placement with trades., • 4-7 years of work experience in electrical bid documents and procuring electrical materials and equipment., • 4-7 years of work experience in AutoCAD, Revit or other related design programs., • Relevant work experience in a manufacturing or construction setting preferred., • PE tracked desirable., • Prolonged periods sitting at a desk and working on a computer., • Up to 25% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Overview Now Hiring! Analog Electrical Engineer Location: Albany, NY 12205 Schedule: Full Time Job Summary: Vitrek is currently looking for an experienced Senior Analog Electrical Engineer to join our growing team of Software and Electrical engineers.This position is for a Full-Time Engineer charged with leading system design at our engineering center of excellence located in Albany, NY. You would be part of a team of engineers designing the next generation of products as well as maintaining the existing product line. You would report to the Vice President of Engineering. What You’ll Do: • Circuit Performance testing, focusing on noise performance and stability, • Legacy and Production Support, • Application Support, • Potential team or project leadershipWhat's in it for You:, • Medical, Dental, Vision Benefits, • Competitive Base Compensation, • Accrued PTO Plan, • Career advancement opportunities in an expanding companyWhat You’ll Need:, • BS/MS EE from an ABET-accredited university, • 5+ years of relevant experience in analog design, • Proof of eligibility to legally work within the United States, • Switching Inverters intended for smaller devices with a power of less than 50W, • Low and ultra-low noise analog amplifiers using both op amps and discrete transistors, • Audio amplifiers, • Analog filters using active components

Job Description Job Summary Packaging Engineers work closely with our process, controls, and building system engineers to scope, layout, install, and commission packaging equipment lines for our food and beverage industry clients. Dennis Group is a design build engineering firm and general contractor that designs and builds food and beverage processing facilities. As such, our packaging engineers are involved with defining packaging equipment project requirements, estimating packaging equipment costs, creating packaging flow diagrams, providing onsite construction support, and start-up and commissioning of the packaging equipment. As a packaging engineer, your responsibilities will include, but not be limited to: Responsibilities • Developing design concepts, estimates and functional specifications for packaging lines, • Interpreting mechanical design requirements and customer specifications to ensure that all requirements are realized in the design of the packaging system, • Specification, purchase, installation and commissioning of packaging equipment, • On-site construction project coordination and management, • Machine and process design, • Preparation of machine testing requirements and procedures, • Preparation of equipment specification, purchase documentation as well as equipment / facility layout, • Surveying existing conditions, • Creating packaging flow diagrams, • Creating material balance, • Creating packaging matrix, • Creating equipment lists, • Assisting with equipment bid packages, • Understanding size and placement of control/electrical panels, • Creating design basis documents and scopes of work, • Producing basis of design documentation, • Preparation and advisement in manufacturing and packaging design principles including conveyance, wrapping, bagging, cartoning, filling, bottling, case packing and palletizing, • Assisting in process simulation, • Providing construction site support, • Observing rough-in construction compliance and plans, specs, and details (install support team member), • Assisting in sanitary design and warehouse design and layout, • Developing AutoCAD equipment layouts, • 0-3 years of work experience or schooling in preparation of machine testing requirements and procedures, • 0-3 years of work experience or schooling in manufacturing and packaging design principles including conveyance, wrapping, bagging, cartoning, filling, bottling, case packing and palletizing, • 0-3 years of work experience or schooling in machine and process design, • Researching packaging engineering best practices, • Bachelor’s degree in mechanical, packaging, industrial, or manufacturing engineering, • 0-3 years of work experience or schooling in scope, layout, install, and commissioning of packaging equipment lines., • Experience working for professional services, packaging, and food and beverage firms is a plus., • Proficiency with MS Office, MS Project, and familiarity with AutoCAD, • Excellent oral and written communication skills, • Intellectual curiosity and a positive, can-do, team-oriented attitude, • Strong problem solving, organizing, and time management skills, • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description As a design/build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s Automation & Controls Engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our Automation & Controls Engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities are required for this role. Typical responsibilities include, but not limited to: Responsibilities • Handle basic issues and problems and refer more complex issues to higher-level engineer, • Design and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems., • Automate manufacturing processes through the use of instrumentation or controls systems., • Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc., • Develop new PLC applications, interfaces, or embedded controls, • Develop new or modify existing set-up and commissioning of new facilities or upgrading of existing facilities, • Design, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc., • Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc., • Specify, procure, configure, and troubleshoot controls hardware and field instrumentation, • Troubleshoot and resolve malfunctions and make recommendations that will improve efficiency or quality of operations, • Develop bid documentation for Electrical, Automation, and Low Voltage (network, security) vendors, • Document specifications and operating procedures, • Interface and manage installation contractors during construction, • Research Automation & Controls materials and best practices, • Bachelor’s degree in Electrical Engineering or a related field, • 0-3 years of work experience or schooling and familiarity with Allen Bradley/Rockwell, Siemens, GE Fanuc, Honeywell Systems., • 0-3 years of work experience or schooling in Visual Basic, SQL, MS ACCESS Database programming skills a plus, • 0-3 years of work experience or schooling with design and implementation process network infrastructures (Ethernet, Device Net, Control Net, ProfiBus, etc.), • 0-3 years of work experience and/or internship(s) in an industrial manufacturing setting, • Database programming skills a plus, • Proficiency with MS Office and AutoCAD Required, • This role is client facing, those successful in this role are professional, self-motivated, and energetic individuals with excellent communication and inter-personal skills., • Prolonged periods sitting at a desk and working on a computer., • Prolonged periods of standing and walking during installation, commissioning and startup. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Dennis Group’s Mechanical Engineers design and implement mechanical systems as part of a broad engineering and architectural team in designing and building food and beverage production facilities. Specifically, HVAC, plumbing / utility, and fire suppression systems. Our mechanical team is involved with designing the mechanical systems, calculating space heat and cooling loads, determining and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Mechanical Engineers will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. You will be a member of our mechanical department and your responsibilities will include, but not be limited to: Responsibilities • Perform heating and cooling load calculations, • Perform code reviews for HVAC/plumbing/fire protection designs, • Perform mass energy balance calculations, • Perform drainage and line loss calculations, • Perform flow test (hydrant or other) analysis, • Sanitary design considerations (layouts, process exhaust), • PID Drafting, • Bid packages: equipment and sub-contractor – bid list, scope of work, milestone schedule, • Create mechanical schedules, • Vendor shop inspection / FAT, • Develop HVAC, plant utility, plumbing, and fire suppression systems, • Assist in mechanical system design development and coordinate with other internal and external team members, • Develop Mechanical / Utility equipment and construction specifications, • Develop P&ID’s, equipment layout plans, plant / process utility distribution plans, and system details, • Size and develop layouts for ductwork and piping plans, • Assist with the development of the building management system (BMS) controls, details, and plans with electrical and controls engineers, • Create project documents such as calculations, reports, and construction drawings and specifications, etc., • Fixture selection, • Perform construction administration in the form of submittal reviews, RFI responses, and field visits to verify construction scope is proceeding per the intent of the design, • Research mechanical / utility materials and best practices, • Bachelor of Science in Mechanical Engineering or related field., • 0-3 years of work experience or schooling in heat transfer, fluid dynamics, and thermodynamics, • 0-3 years of work experience or schooling with HVAC/plumbing/fire protection designs and specifications., • 0-3 years of work experience or schooling performing calculations in areas of energy, drainage, line loss, etc., • Basic report writing and communication skills, • Relevant internship(s) in an industrial manufacturing setting preferred, • Working towards or has FE/EIT certificate, • Strong technical writing skills, • AutoCAD and Revit design ability preferred, • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Job Summary The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities • Designing electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities., • Execute duties on larger projects independently, • Client contact and lead engineer, • Documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc., • Maintains project document organization, • Manage time and meet commitments, • Understands Ohms Law, AC/DC, Electric and magnetic fields, • Understands power system theory – 3-phase vector math, power factor, symmetrical components, • Understands capacitors, inductors, and resonance, • Designing lighting for food processing spaces, including lighting calculations for emergency and inspection lighting level needs. Coordinating fixture placement/mounting with other trades., • Designing fire alarm systems per NFPA 72, 101, and local building code., • Code expertise – NEC, NFPA 72/101/, IBC, • Specify means and methods, • Specify other common work – grounding, start-up, LV & MV Cables, • Specify equipment, • Designing low voltage systems such as LAN, phones, PA, Wi-Fi, access control, cameras, etc., • Create power plans, • Create power one line and panel schedules, • Define fire alarm requirements per IBC and NFPA 101, • Define Low Voltage Systems, • Review scope with client – create and manage needs list, • Producing bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications., • CAD – add 2D & 3D devices to Xrefs, • Procuring long lead light fixtures and power distribution equipment such as switchgear, switchboards, panelboards, transformers, MCC’s, generators, variable speed drives, and UPS’s., • Transformer configurations, • Perform short circuit calculations identifying deficiencies or series ratings, • Estimate weights of main tray/trapezes and equipment needing support, • Assist in managing electrical bid process for clients, observing construction, and assisting with startup., • Project planning and feasibility studies., • Actively participating in and supporting department-wide standard development, updates, and maintenance., • Researching electrical building/power materials and best practices, • Supporting talent growth within our organization, • Assists with interviewing and hiring new team members, • Handle complex issues and tasks with minimal supervision and advise subordinate team members on solutions to issues they encounter., • Bachelor of Science in Electrical Engineering or related 4-year degree, • 8+ years of work experience in electrical systems for building power., • 8+ years of work experience in designing lighting, fire alarm systems, and low voltage systems for building spaces, including lighting calculations, and coordinating fixture placement with trades., • 8+ years of work experience in electrical bid documents and procuring electrical materials and equipment., • 8+ years of work experience in AutoCAD, Revit or other related design programs., • Relevant experience in a manufacturing or construction setting preferred., • FE or PE tracked desirable., • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description This position supports the engineering and design needs of the control panel and process electrical design. This position will engage with various internal and external resources to gather data for best-in-class design and final products. External resources include manufacturer representatives and customer personnel. Responsibilities • Develop electrical and controls system design solutions based on engineering principles., • Evaluate P&IDs to determine I/O requirements., • Develop electrical schematics, panel layouts, and BOM’s., • Design and facilitate production of control panels per NEC & UL standards., • Maintain a neat, clean, and efficient work area daily., • Develop and execute QC process for quality assurance., • Experience designing industrial electrical control systems., • Experience in Electrical Construction Drawings, • Must have knowledge and understanding of AC / DC power circuits, pushbuttons, circuit breakers, power supplies, overloads, contactors, relays, motors, VFD's, PLC's, • Must have knowledge of National Electrical Code (NFPA 70), • Design to UL Standards for Industrial Control Panels (UL508A) (preferred), • Able to interpret NEC for Control Panel to meet the NEC and or field installation., • Calculate conductor sizing, de-rating, temperature de-rating., • Design to hazardous location requirements for class 1, class 2, division 1 & 2 requirements. (preferred), • Design to IS requirements (UL698) (preferred), • Perform three phase and single-phase load calculations, • Perform SCCR calculations, • Highly organized with strong analytical skills., • Safety-minded and follow safety regulations Potential for up to 25% travel to client sites to evaluate and detail clients existing conditions. Specific/Special Skills • Strong software knowledge in Microsoft Word, Excel and Outlook. Technical/other training or better in Automatic Control Systems (preferred) About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description As a design/build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s Automation & Controls Engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our Automation & Controls Engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities are required for this role. Typical responsibilities include, but not limited to: Responsibilities • Handle basic issues and problems and refer more complex issues to higher-level engineer, • Design and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems., • Automate manufacturing processes through the use of instrumentation or controls systems., • Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc., • Develop new PLC applications, interfaces, or embedded controls, • Develop new or modify existing set-up and commissioning of new facilities or upgrading of existing facilities, • Design, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc., • Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc., • Specify, procure, configure, and troubleshoot controls hardware and field instrumentation, • Troubleshoot and resolve malfunctions and make recommendations that will improve efficiency or quality of operations, • Develop bid documentation for Electrical, Automation, and Low Voltage (network, security) vendors, • Document specifications and operating procedures, • Interface and manage installation contractors during construction, • Research Automation & Controls materials and best practices, • Junior or Senior pursuing a Bachelor’s degree in Electrical Engineering or a related field., • Allen Bradley/Rockwell, Siemens, GE Fanuc, Honeywell Systems familiarity., • Visual Basic, SQL, MS ACCESS Database programming skills a plus., • Design and implement process network infrastructure (Ethernet, Device Net, Control Net, ProfiBus etc)., • Database programming skills a plus., • Proficiency with MS Office and AutoCAD Required, • Must meet travel requirement - you will spend significant time in our client's facilities during installation and startup/commissioning/qualification phases of a project – 35% to 50% of any given time of the year., • Prolonged periods sitting at a desk and working on a computer., • Prolonged periods of standing and walking during installation, commissioning, and startup. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Job Summary As a design build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s automation & controls engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our automation & controls engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities is required for this role. Typical responsibilities include, but not limited to: Responsibilities • Handles moderately complex issues and problems and refers more complex issues to higher-level engineer, • With general supervision, designs and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems., • Automates manufacturing processes through the use of instrumentation or controls systems., • Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc., • Develops new PLC applications, interfaces, or embedded controls, • Develops new or modifies existing set-up and commissioning of new facilities or upgrading of existing facilities, • Design, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc., • Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc., • Specify, procure, configure, and troubleshoot controls hardware and field instrumentation, • Assist with coordinating with other engineer disciplines, • Troubleshoots and resolves malfunctions and makes recommendations that will improve efficiency or quality of operations, • Develop bid documentation for Electrical, Automation, and Low Voltage (network, security) vendors, • Documents specifications and operating procedures, • Project primary client technical contact, • Interface and manage installation contractors during construction, • Researching Automation & Controls materials and best practices, • Supporting talent growth within our organization, • Degree in Electrical Engineering or a related field, • 4-7 years of experience with Allen Bradley/Rockwell, Siemens, GE Fanuc, Honeywell Systems., • 4-7 years of experience in Visual Basic, SQL, MS ACCESS Database programming skills a plus, • 4-7 years of experience with Design and implement process network infrastructure (Ethernet, Device Net, Control Net, ProfiBus, etc.), • 4-7 years of experience in an industrial manufacturing setting, • Database programming skills a plus, • Proficiency with MS Office and AutoCAD Required, • This role is client facing, those successful in this role are professional, self-motivated, and energetic individuals with excellent communication and inter-personal skills., • Prolonged periods sitting at a desk and working on a computer., • Prolonged periods of standing and walking during installation, commissioning and startup. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description SUMMARY: The Test Pilot Instructor will be responsible for assessing and ensuring simulator fidelity by flying at the controls of a C-5 aircraft to compare simulator performance. The Test Pilot Instructor will also provide Aircraft Systems/operational procedures instruction in aircraft/ classroom/ simulator and/or practical environments, as needed. Assist as Subject Matter Expert in development of curriculum for new type courses as required. May provide additional special services such as courseware review and other additional administrative duties such as publications, safety, quality audits, FCIF, scheduling, and other duties as maybe assigned, etc. ESSENTIAL DUTIES AND RESPONSBILITIES: • Required to fly at the controls of a C-5 aircraft to compare simulator performance, • Fly semi-annually on Mission Essential Personnel (MEP) status (or IAW applicable Major Command (MAJCOM) supplement to AFI 11-401 Aviation Management) aboard the respective Mission Design Series (MDS) during local flying missions., • Must hold a Federal Aviation Administration (FAA) medical Certificate Second Class, • A positive attitude and a professional student/instructor relationship;, • Provides Pilot procedures instruction in aircraft, classroom, and simulator or other platform environments., • Provides training for Visual Threat Recognition Avoidance Training (VTRAT)., • Provides Crew Resource Management (CRM) and Instrument Refresher Course (IRC) training., • Must be thoroughly proficient in evaluating, diagnosing, and critiquing student performance; identifying learning difficulties; recognizing objectives not accomplished; and prescribing and conducting remedial instruction., • Assists as a Subject Matter Expert in the development of curriculum for new type courses as required., • Acts as a Lesson Subject Matter Expert to review existing lessons and/or changes to existing lessons., • Conducts ground training for other crewmembers to include diagnosis and remediation of student issues., • Assists in project and development work as assigned., • Performs administrative duties such as scheduling, record keeping, monitoring student progress, gradebook entries, counseling, quality assurance, safety, security, and maintenance of training programs and equipment., • Must be physically able to enter and exit both simulator and aircraft as per government regulations and OSHA standards., • Must be able to stand up and conduct academic instruction in simulator and classrooms for up to six hours each day., • Must maintain proficiency in operation of essential Aircrew Training Devices. Aviation instruction is a highly specialized function that requires the instructor to have prior aircraft operating experience and the ability to hold creditability and the attention of the customer attendees., • Must acquire and maintain instrument, take-off, landing, and emergency procedure proficiency., • Evaluates instructor personnel in classroom and devices, if required., • Ensure compliance with AETCI 36-2909, • Remain in compliance with AFI 36-2909, Professional and Unprofessional Relationships;, • Be groomed and dressed professionally, as a representative of CymSTAR and the Government;, • Wear an identification badge and be easily distinguishable between a student and instructor;, • Be subject to spot evaluations determining compliance with instructor training and performance at any time in either the classroom or a simulator. These evaluations do not require prior notice;, • Make recommendations to enhance training;, • Must agree to a one-year contractual commitment (owe pro-rated cost reimbursement to the Government if termination occurs before one year);, • Adhere to periodic testing and evaluations on an annual basis, pass Government evaluation open and closed book exams, and pass flight evaluations on a training device. Other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: Bachelor’s degree in field or equivalent experience. Previously qualified as an Instructor Pilot with a minimum of 200 hours of experience; or 2 years of C-5 Instructor Pilot experience. LANGUAGE SKILLS: Ability to read, analyze, and interpret common professional literature. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to management, and colleagues. MATHEMATICAL SKILLS: Ability to comprehend and apply basic mathematical skills. COMPUTER SKILLS: Solid technology skills are required, including a deep understanding of multiple database technologies, enterprise systems integration, and software evaluation techniques. The ability to translate differing and possibly conflicting customer needs and preferences into design requirements is essential as well as the ability to reverse engineer business processes and tools. The ability to analyze, identify and solve a variety of problems is critical. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. CITIZENSHIP: U.S. Citizenship. Must be able to obtain a Secret Level Clearance OTHER SKILLS and ABILITIES: Experienced and proficient in the use of standard Personal Computer productivity software tools including word processors, spreadsheets, presentation graphics, project management, and databases. PHYSICAL DEMANDS: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is frequently required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl., • The employee must regularly lift and/or move up to 10 pounds, must frequently lift and/or move up to 25 pounds, and must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: • The work environment characteristics described here are representative of those an employee may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, electrical shock, moving parts and vibration., • The noise level in the work environment is usually quiet., • The employee is occasionally required to work holidays, weekends and odd shifts. OTHER REQUIREMENTS: • Comply with company policies and procedures and work instructions, • Follow company standards of professionalism, • Treat customers and coworkers with respect, • Be honest and dedicated in your work, • Follow directions of supervisory and management staff, • Comply with Company quality standards, • Maintain a professional appearance and comply with any company dress code CymSTAR, LLC will recruit, hire, train and promote qualified individuals in all job titles, and ensure that all other personnel actions are administered without regard to race, color, religion, sex, military and/or veteran status, or disability in accordance with Section 503 of the Rehabilitation Act of 1973, as amended, and the Vietnam Era Veterans Readjustment Assistance Act of 1974, which require affirmative action to ensure equal opportunity in all aspects of employment. CymSTAR, LLC does not discriminate on the basis of national origin or citizenship status as provided under the Immigration Reform and Control Act of 1986. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department via phone at 918-251-8100 or email at

Job Description Job Summary Dennis Group Process Piping Designers work heavily with process engineers and other engineering disciplines in designing multiple aspects of our food and beverage process facility projects. Responsibilities involve the layout of process and utility equipment in 2D equipment arrangements, creating Process Mechanical drawings using the 2D AutoCAD, 3D modeling of process and utility equipment, full 3D design of process and utility piping systems per P&IDs and Process Engineer(s) direction, creating piping drawings using the 3D models for bidding and construction purposes, equipment access and support platform design, pipe support systems, and extensive coordination of process piping and process mechanical designs with the entire facility design team. Other responsibilities include, but not be limited to: Responsibilities • Equipment Layout Design – 2D and 3D for food and beverage processing facilities, • Ability to plot drawings and create *.pdf format files, • Develop general 2D & 3D drafting and updating of drawings per “red line” mark-ups, • Platform Design – Conceptual design for review by Structural Engineer., • Piping and Instrumentation Drawing – Understanding of and ability to create, must be able to create piping drawings from PIDs and equipment arrangements., • Gather and organize information for developing design drawings; visit client sites as needed to understand existing equipment arrangements and piping systems., • Oversee all aspects and details of process and utility piping., • Perform basic CAD design work, • Communication Skills - Work with the architectural, structural, mechanical, electrical and control disciplines in the overall design coordination., • Prepare general arrangements, plans, elevations, isometrics and details for use in bid packaging and construction., • Modification of existing equipment layout drawings as directed by PM or Sr Designer, • Coordinate and distribute project workload to team members, • Take vendor information and accurately depict it on PM drawings, • Create multilevel equipment arrangements drawings, • Create 3D equipment arrangement drawings, • Create 3D piping models, • Create “SMART” PIDs, • Create simple AutoCAD based PIDs, • Contributes to developing DG CAD standards, • Participate in project team meetings with client, • Act as project design coordinator (clash detection, coordination with other disciplines and design firms to create coordinated model), • Work onsite directly with contractors, DG construction and engineering teams, • Produce drawings for bid packages, • Set up drawings (sheets to transfer project information to contractors, • Execute 3D model reviews with client using Navisworks., • Assist construction managers with coordination issues in the field., • Researching processing piping design best practices, • Associate Degree is required. A bachelor’s degree in an engineering-related filed is preferred., • Work experience in piping and equipment layout for food and beverage processing facilities or similar production facilities., • Work experience in AutoCAD, • Work experience in 3D experience using CADWorx, Plant3D or similar programs, Revit piping experience., • Familiarity with XREFS and basic drawing setup, • Ability to interpret PIDs and transpose that information into a piping layout., • Experience with design of Food and Beverage processes a plus, • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

MassMutual’s Data Science team is seeking an impact-driven Lead AI Engineer to join our high-performing, cross-functional team. In this role, you will lead the design and deployment of advanced AI solutions that drive strategic decision-making and business transformation. You’ll apply cutting-edge techniques in machine learning, generative AI, and large language models (LLMs) to solve complex, high-value problems across the enterprise. This is a unique opportunity to work alongside experts in applied mathematics, statistics, computer science, and physics—collaborating on initiatives that shape the future of MassMutual and the life insurance industry at large. Overall Responsibilities: * Architect and lead end-to-end ML/AI solutions supporting various use cases for a large enterprise using LLMs, deep learning, and probabilistic modeling—from ideation to production. * Deploy scalable GenAI and Agentic AI systems that directly support business goals. * Establish and promote best practices in AI development and responsible AI deployment. * Drive innovation by identifying emerging technologies and translating research into practical applications. * Collaborate with engineering teams to build robust, production-grade AI pipelines and APIs. * Prototype and deliver AI-powered applications (e.g., web apps, dashboards, visualizations) that enable data-driven decisions. * Influence senior leadership by aligning AI initiatives with enterprise strategy and communicating insights effectively. * Mentor and develop junior talent, fostering a culture of technical excellence and continuous learning. Candidate Requirements: * Recognized industry expertise in AI/ML, with a track record of delivering impactful solutions. * 7+ years of experience in data science, machine learning, or AI engineering roles. * Deep understanding of machine learning, statistics, NLP, optimization, and LLMs. * Hands-on experience with AI deployment and orchestration frameworks and protocols (e.g., MLflow, llama-index, MCP). * Extensive experience testing LLM behavior across a variety of foundation models and benchmarks. * Experience building AI-powered applications and collaborating with software engineers and product managers. * Strong programming skills in Python. Proficiency in R is a plus. * Proficiency in SQL and database design; familiarity with cloud-native data platforms, vector databases, and semantic search is a plus. * Exceptional communication skills, with the ability to explain complex concepts to non-technical stakeholders. Education: M.S. or Ph.D. in Computer Science, Statistics, Applied Mathematics, Electrical Engineering, Physics, or a related quantitative field. #LI-MC1 MassMutual is an equal employment opportunity employer. We welcome all persons to apply. If you need an accommodation to complete the application process, please contact us and share the specifics of the assistance you need. California residents: For detailed information about your rights under the California Consumer Privacy Act (CCPA), please visit our California Consumer Privacy Act Disclosures page.

Job Description SUMMARY: Responsible for analyzing malfunctions; performing repair, calibration, inspection, overhaul, modification, re-programming, maintenance support and operation of simulators, trainers, computers, and digital image visual systems. Supports C-5 Training System (TS) device operations, readiness, troubleshooting, and sustainment. This position requires shift work to support daily training operations. ESSENTIAL SKILLS AND RESPONSIBILITIES: • Assists students and instructors with operation of training devices, including DMO activities (setup, power on/off, readiness testing, initialization, and related support)., • Prepares the system for operation IAW onsite operational and technical manuals and performs required operational support functions., • Operates the WST as an aircrew member (pilot, copilot, flight engineer, or instructor) to evaluate system operation., • Conducts systems interface checks, system-level diagnostics, and device readiness-for-training checks., • Executes system initialization, recovery, and reset actions during training operations., • Conducts voice communications on phone, interphone, and radio circuits., • Diagnoses and resolves problems associated with training device initialization or operation., • Diagnoses malfunctions of computers and associated equipment; performs readiness tests and repairs., • Applies fundamental troubleshooting procedures to maintain interfaces and peripheral equipment used with computers., • Performs fault isolation and assists with root-cause identification., • Possesses extensive practical knowledge of electronic circuits, computer theory, and hydraulic/pneumatic control and power systems., • Performs scheduled preventive maintenance, unscheduled maintenance, inspections, repair, calibration, overhaul, and re-programming tasks., • Applies comprehensive technical knowledge to solve complex problems by interpreting maintenance manuals, drawings, and related documentation., • Installs changes and updates to simulators and support equipment as required., • Interprets and works with computer systems using various operating systems., • Installs and maintains Computer-Based Training (CBT) networks, servers, and workstations., • Provides networking and information systems support for training devices and associated networks., • Interprets detailed circuit diagrams, schematics, and electrical drawings., • Performs soldering operations on delicate microelectronic and electronic assemblies., • Supports lifecycle sustainment by installing approved hardware/software updates and maintaining configuration alignment., • Maintains required documentation of all maintenance activities, including work orders, repair status, actions taken, inventory, and material control functions., • Documents all parts usage, consumables, and spares activity for sustainment reporting., • Identifies recurring issues and provides technical input for corrective action recommendations., • Adheres to all health, safety, security, and local base procedures., • Supports preparations for FAA-level certification inspections., • Receives technical guidance from a supervisor or senior technician as needed., • Attends required weekly, monthly, and quarterly meetings., • Maintains compliance with company professionalism standards, policies, and operational requirements., • Must be able to obtain a SECRET security clearance. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: Technical/Associate’s degree is desired with three (3) to five (5) years’ experience as a flight simulator technician or equivalent job-related experience. Aircraft maintenance work experience within an Aerospace Repair shop environment and an Airframe & Propulsion license (highly desired). Knowledge of commonly used concepts, practices, and procedures within the field. Related skill areas should include technical writing and presentation skills. LANGUAGE SKILLS: Ability to read, analyze, and interpret common professional literature. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to management, and colleagues. MATHEMATICAL SKILLS: Ability to comprehend and apply basic mathematical skills. COMPUTER SKILLS: Experienced and proficient in the use of standard Personal Computer productivity software tools including word processors, spreadsheets, presentation graphics, project management, and databases. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. CITIZENSHIP: U.S. Citizenship. Must be able to obtain a Secret Level Clearance OTHER SKILLS and ABILITIES: Familiar with basic and advanced pieces of specialized tools and test equipment such as oscilloscopes, function generators, DVM, torque wrenches, etc. PHYSICAL DEMANDS: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is frequently required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl., • The employee must regularly lift and/or move up to 10 pounds, must frequently lift and/or move up to 25 pounds, and must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: • The work environment characteristics described here are representative of those an employee may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, electrical shock, moving parts and vibration., • The noise level in the work environment is usually quiet., • The employee is occasionally required to work holidays, weekends and odd shifts. OTHER REQUIREMENTS: • Comply with company policies and procedures and work instructions, • Follow company standards of professionalism, • Treat customers and coworkers with respect, • Be honest and dedicated in your work, • Follow directions of supervisory and management staff, • Comply with Company quality standards, • Maintain a professional appearance and comply with any company dress code CymSTAR, LLC will recruit, hire, train and promote qualified individuals in all job titles, and ensure that all other personnel actions are administered without regard to race, color, religion, sex, military and/or veteran status, or disability in accordance with Section 503 of the Rehabilitation Act of 1973, as amended, and the Vietnam Era Veterans Readjustment Assistance Act of 1974, which require affirmative action to ensure equal opportunity in all aspects of employment. CymSTAR, LLC does not discriminate on the basis of national origin or citizenship status as provided under the Immigration Reform and Control Act of 1986. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department via phone at 918-251-8100 or email at