Trabajos Engineering en Manchester, New Hampshire - Page 5Crear alertas

Job Description As a Senior Manufacturing Engineer at DEKA, you’ll play a critical role in transforming innovative medical device designs into scalable, high-quality, and regulatory-compliant manufacturing solutions. You’ll work at the intersection of engineering, design, quality, and supply chain to ensure our products are not only manufacturable, but meet the stringent demands of safety, reliability, and performance required in healthcare. You’ll lead detailed DFM reviews, evaluate GD&T and component specifications, and guide new product introductions from prototyping through to full-scale production. Your expertise in manufacturing electro-mechanical assemblies—including machined, molded, cast, and PCBA components—will help bring life-changing technologies to market efficiently and cost-effectively. From collaborating on DFMEA/PFMEA, managing prototype builds, and optimizing supplier strategies, to developing ROI-backed launch plans and driving continuous improvement—you’ll make a direct impact on how we deliver breakthrough medical solutions to patients around the world. How you will make an impact as a Manufacturing Engineer: • Evaluating and understanding of the design intent, manufacturability, GD&T of components and assemblies specs for transition into the mass production., • Reviewing design documents and Specification and working with the design team to finalize them, • Detailed assessments and critical DFM review of engineering designs/drawings/specifications of components and assemblies., • Providing analysis and recommendations for feature and manufacturing cost tradeoffs, during the design phase., • Identify the manufacturing technologies relevant to new design concepts, advise the design team on the best and effective means to execute., • Identifying improvements and drive actions back to design or advancing process working with the sourcing team at the supplier or tooling improvements, • Evaluating and finalizing inspection and test requirements, • Working with the sourcing team to develop strategy for these designs and provide estimates or review quotes of cost, and tooling required to execute., • Working with the sourcing team to develop comprehensive, cost effective manufacturing strategies, including supplier selection, to drive product team decisions on sourcing to achieve cost targets., • Working with design team and suppliers on DFMEA, PFMEA,, • Develop manufacturing cost models to feed advisory information to the design teams, • Working with CM and to drive quality and cost, • Evaluating and finalizing on a scaled launch approach for designs concepts. Matching time and concepts to execute with appropriate maturity of design. Ex. Machined approach to start thru to a tooled approach in later time., • Manage this maturity and progression thru to full execution, including ROI justifications., • Managing the manufacturing of prototypes used in new product development, including selecting the most appropriate prototype methods and executing prototype development to support new product design trials., • BS Degree in Mechanical Engineering or similar with Manufacturing focus, • 5+ years in a manufacturing engineering role which includes NPI or CM experience., • Experience manufacturing electro mechanical products at scale, including machined, cast, forged, PCBA and cables and plastic components., • Experience, taking a product from launch to scale, • Design skills including GD&T, design validation, and inspection., • Demonstrated Pro-E/Creo and or Solidworks proficiency., • Experience in should-cost analysis and models to evaluate Cost of Goods One hour from the beach, Boston, and the mountains, the historic Amoskeag Millyard once housed the largest textile mills in the world. It is now home to DEKA Research & Development, where we are taking the same innovation and cutting-edge technology into the modern age. Behind DEKA’s brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored. Powered by JazzHR tqlEMm3XAd

Job Description ATC POWER SYSTEMS INC. Systems is seeking Power Supply Electrical Engineer to fill a variety of electrical engineering tasks based on your background, skill set and interest level. An exciting future at ATC POWER SYSTEMS INC. Systems awaits you I. BASIC FUNCTIONS OF THE JOB: To perform electrical engineering work which is specific in nature and requires knowledge and application of basic engineering principles, theories and concepts to complete assignments under direct technical supervision. II. PRIMARY DUTIES AND RESPONSIBILITIES: 1. Performs specific technical assignments of an investigatory, design or test nature requiring analysis and evaluation, selection and application of basic engineering principles, theories, and techniques., 2. Receives directions and instructions in the form of assignment objectives, alternative approaches and solutions from supervisor or senior engineering personnel., 3. Works from specific assignments from supervisor or senior engineering personnel which may include design and development of specific components, circuits, 4. Instructs and directs the work of technicians, if assigned., 5. Prepares charts, diagrams and reports expressing technical progress and accomplishments measured against specific plans Preferred Skills and Education • Power Supply/Systems Design, • Analog Circuit Design, • Digital Circuit Design, • Programing language experience, • SPICE or equivalent analog circuit simulation tool experience, • Board Design, • Schematic capture and PCB design software, • RF circuit design, • Proficient in active and passive electrical components, • AS Degree in Electrical Engineering or Computer Engineering, • BS Degree in Electrical Engineering or Computer Engineering Company DescriptionWe manufacture High Reliability low voltage Power supplies for the United States MIlitaryWe manufacture High Reliability low voltage Power supplies for the United States MIlitary

Job DescriptionCOMPANY OVERVIEW: Merrimack Manufacturing is a medical device manufacturer located in the Manchester Millyard. We are a growing manufacturing company that will play a crucial part in bringing innovative and life changing products to life. POSITION OVERVIEW: This position will support manufacturing quality operations in a dynamic, fast-paced, medical device manufacturing environment. This environment includes the manufacture, inspection, and test of devices for design verification, design validation, and commercial production. RESPONSIBILITIES: • Work cooperatively with other team members and in compliance with applicable standards and regulations such as 21 CFR 820 and ISO 13485:2016 to transition products from development to manufacturing., • Use experience within medical devices, to provide guidance and assistance in the development of new production processes, • Drive the development, implementation, and approval of PFMEAs and control plans., • Develop inspection processes and sampling plans according to the risk level of the components, material and devices, • Use experience with engineering and technology to ensure compliance with applicable standards and regulations., • Ensure all product, processes, and components are within specifications and work with internal team and with customers to resolve any nonconformance issues, • Facilitate the development, implementation, and approval of Device Master Records and Device History Records., • Review existing procedures and for continuous improvement and improved workflow, • Lead investigations resulting in root cause and corrective actions through use of data analysis, inductive and deductive reasoning, and problem solving skills., • Use critical thinking and deductive reasoning to make risk based decisions., • Develop and approve technical documents to plan work, such as Master Validation Plans, Quality Plans, and Qualification Protocols; support execution of work product., • Collect and evaluate data, lead system and process improvements using six sigma tools, • Provide reliability and statistical analysis of data for investigations, qualifications, test method validations and other Quality related activities., • 3 + years of experience in occupation related to Quality Control of medical devices., • Experience with compliance, with applicable standards and regulations such as 21 CFR 820 and ISO 13485:2016 is required., • Experience participating in internal and external audits.EDUCATION: Bachelor’s degree or equivalent experience in Industrial, Mechanical or related engineering / life sciences related discipline. Powered by JazzHR 9pICtKSC5A

Job Description POSITION SUMMARY Oversee the creation, development, implementation and control of manufacturing details to produce complex assemblies. Position requires cross functional collaboration with procurement, machining, weld, paint and quality departments to drive safety, meet quality and delivery requirements, and ensure efficiency to meet cost targets. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES • Define and develop manufacturing processes., • Create manufacturing routers based on product requirements and best practice., • Create and maintain manufacturing work instructions., • Establish control plans for critical features and special processes., • Define inspection requirements to ensure compliance with customer requirements., • Champion process development and improvement to quality and efficiency., • Determine and eliminate root cause of quality defects, • Develop tools, fixtures and test equipment required for manufacturing., • Create Quote details for new and re-occurring orders., • Support legacy product and New Product Introduction (NPI), working with a team of Program Managers, Project Engineers and Quality Engineers to meet shipment goals., • Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety guidelines., • Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers, directors and workers, collaborating with them to accomplish shared purposes and goals. QUALIFICATIONS, SKILLS, AND ABILITIES • 3+ years of experience developing manufacturing processes for machining, welding and/or electromechanical assembly., • Experience with manufacturing processes to include CNC machining, welding, inspection and assembly., • Understanding of GD&T and experience interpreting detailed engineering drawings., • Experience with project management responsibilities., • 3+ years of experience in a defense/aerospace-related job shop environment is preferred., • BS in Mechanical, Industrial or Manufacturing Engineering discipline or 3+ years of equivalent on the job training and experience., • Proficiency in MS Office Products, • Demonstrated proficiency in SolidWorks., • Excellent human interaction skills Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits • Paid time off, • Floating holidays, • Paid holidays, • 401(k), • 401(k) company matching, • Dental & Vision insurance (Company paid), • Employee assistance program, • Flexible spending account, • Competitive health insurance, • Health savings account, • Life insurance, • Referral program

Job DescriptionDescription: Haigh-Farr is a premier antenna design, manufacturing and test house developing products used across all platforms in the aerospace industry including missions to Mars, the International Space Station and products fielded to the U.S. Military supporting the warfighter. In our over 50-year history we have enjoyed steady, planned growth. In 2020, Haigh-Farr plans to further grow our team and capabilities to meet increasing demand and to expand into new markets and antenna technologies. Haigh-Farr is seeking an RF Engineer with experience in the design and development of antennas and their support equipment. Our core technologies include, but are not limited to, stripline and microstrip. The individual will work closely with colleagues and customers to identify RF hardware requirements and create new designs as well as support customer proposals for new projects. We are seeking an engineer who will lead advances in existing technology and push new RF technology to help expand our product offerings. Qualified engineers will gain experience designing for manufacturability, as all design, fabrication and performance verification takes place in house. Requirements: Responsibilities: • Antenna design from initial concept through prototype development, production and test., • Communicate with customers to determine operational requirements and create designs that meet or exceed those needs., • Provide manufacturing and test support, including RF and Environmental testing (vibration, shock, thermal and thermal vacuum are all done in house)., • Contribute to proposal creation and customer presentations., • Manage multiple unique and custom projects., • BS in Electrical Engineering, Masters or PhD preferred, • Proficient in HFSS, ADS, MATLAB (or similar antenna simulation tools), • 5+ years’ experience in the design and test of RF applications Haigh-Farr is a fast paced, growing company that recognizes employees with a promote-from-within philosophy. We believe in a friendly work environment where employee contributions are well received and a key component to our success. Our facility features state of the art technology and the latest manufacturing and testing capabilities. Please see more details about our benefits below. • Health Insurance Plan with Health Reimbursement Feature, Dental Insurance and Vision Insurance, • Flexible Spending Accounts – Health and Dependent Care, • Company Paid Disability Insurance and Group Term Life Insurance, • Paid Vacation, Holidays, and Sick Time, • 401K with Company Match, • Competitive salary, commensurate with experience and capabilities, • Company Sponsored Social Events – pizza luncheons, golf outings, food truck BBQ luncheons, Holiday Parties Haigh-Farr is located in beautiful income and sales tax-free Southern New Hampshire, just outside of the state’s largest city, Manchester. Bedford offers great schools, a low cost of living and convenient access to highways and the airport. You can find great dining and wonderful activities including a summer farmers market, food truck festival, and kid-friendly museums and parks all within the region. For the outdoor enthusiast, Bedford is about 1 hour’s drive to the East to the scenic New England coast and 1 hour’s drive to the North to the Mountains and Lakes Region for summer activities, ice fishing, hiking and skiing. Boston is 1 hour’s drive to the South and offers world-class dining, museums, professional sports and universities. Relocation assistance is available.

Job DescriptionDescription: Hybrid Onsite 5 days/week, alternating weeks in either Manchester, NH or Boston, MA or Irving, TX Our client seeks a Senior Full Stack Engineer to build omni-channel user experiences and platform capabilities that support retail Alternative Investments and crypto solutions. The role requires deep expertise with Angular, TypeScript, RxJS, NgRx, Node.js/NestJS, CI/CD, automated testing, and AWS. You will contribute across the stack within autonomous teams, shaping performant, secure, and resilient web applications while promoting clean, testable code. Experience with mobile technologies and modern web architectures will be valuable. Due to client requirements, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $70.00 to $80.00/hr. w2 Responsibilities: • Design, develop, and deploy end-to-end web features using Angular and TypeScript with a test-first approach., • Build and maintain resilient front-end architectures leveraging RxJS, NgRx, and modern patterns such as micro-frontend, BFF, and Module Federation., • Develop and integrate backend services using Node.js/NestJS and RESTful APIs., • Implement robust automated tests with tools such as Cypress, Playwright, Jest, and Storybook., • Apply advanced Git workflows, branching strategies, and CI/CD practices to deliver high-quality software., • Optimize performance, security, and reliability across web experiences with a focus on customer experience and accessibility., • Leverage AWS services including EC2, Lambda, serverless computing, and DynamoDB to deliver scalable solutions., • Collaborate within autonomous, cross-functional teams to take features from concept to production., • Contribute to reusable core components, standards, analytics, A/B testing, and personalization initiatives., • 6+ years building web applications with Angular 12+, TypeScript, RxJS, and NgRx in an agile environment., • Proficiency with Node.js and NestJS for building microservices and RESTful APIs., • Strong experience with automated testing using Playwright, Cypress, Jest, and Storybook., • Advanced Git expertise, effective branching strategies, and CI/CD pipelines., • Knowledge of HTTP/S, REST, networking fundamentals, and web performance., • Experience with modern web architectures such as micro-frontend, BFF, and Module Federation., • Strong understanding of AWS services including EC2, Lambda, serverless computing, and DynamoDB., • Experience with security standards including OAuth and OpenID Connect., • Experience or willingness to learn Android and iOS mobile technologies., • Experience with Nx workspaces (preferred)., • Experience with Docker, containerization, and orchestration (preferred)., • Exposure to AWS Route 53 and API Gateway (preferred). W2 employees of Eliassen Group who are regularly scheduled to work 30 or more hours per week are eligible for the following benefits: medical (choice of 3 plans), dental, vision, pre-tax accounts, other voluntary benefits including life and disability insurance, 401(k) with match, and sick time if required by law in the worked-in state/locality. If anyone reaches out to you about an open position connected with Eliassen Group, please ensure that you are working directly with us by confirming the following: · When you work with Eliassen Group, all email communication will come from an Eliassen.com address, never Gmail, Yahoo, etc. · Eliassen Group will never ask you for personal information (home address, bank account, or check routing number) until you have worked with someone clearly associated with Eliassen Group. If you have any indication of fraudulent activity, please contact . About Eliassen Group: Eliassen Group is a strategic consulting firm that helps organizations reach further and achieve more through our technology, business advisory, and life sciences solutions. For nearly 40 years, we have combined exceptional people, deep domain expertise, and intelligent capabilities to expand our clients’ capacity and accelerate meaningful outcomes. We are driven by a purpose to positively impact the lives of our employees, clients, consultants, and the communities we serve. Eliassen is committed to building a diverse and inclusive team from a variety of backgrounds, perspectives, and skills. We are an Equal Opportunity and Affirmative Action Employer and all employment decisions are based on merit, performance, and business needs. Eliassen does not discriminate on the basis of race, color, gender identity or expression, sexual preference or orientation, sex (including pregnancy, childbirth, and related medical conditions), marital status, creed, religion, physical or mental disability, genetic information, military or veteran status, age, ancestry, national origin, citizenship status, prohibited criminal record inquiries of applicants and employees, or any other category protected by federal, state, or local laws. Don’t miss out on our referral program! If we hire a candidate that you refer us to then you can be eligible for a $1,000 referral check!

Job Description H&H is offering an exciting opportunity for a Structural/Bridge Engineer to join the Bedford, NH team. We are currently growing our design services and client base to support client and project needs in the Structural/Transportation focus areas. The successful candidate will assist in the design of simple and complex fixed bridges, movable bridges and perform bridge inspections with a growing office. Be part of a team that delivers award-winning local bridges like the Sarah Mildred Long Vertical Lift Bridge, the ENR 2020 Bridge/Highway Project of the Year. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Perform structural design and analysis tasks for projects including bridge rehabilitation and replacement projects under the oversight of a senior engineer, • Prepare detailed plans and construction documents for the assigned tasks, • Perform engineering calculations pertaining to and in support of the detailed plans and construction documents developed, • Develop contract specifications and contract bid documents, and technical report writing, • BS in Civil Engineering, • PE License preferred, or ability to obtain within two years, • A minimum of three years of Structural Engineering experience with a focus on bridge design (preferred), • Experience in conceptual, preliminary, and final design and plan production of bridge projects following Federal and State codes, • Ability to work effectively as part of a design team, • Experience with current FEM modeling software (preferred), • Must be detail and goal-oriented, a self-starter and proficient in both verbal and written communications We offer a professional work environment, a competitive salary, benefits package and 401(k). EOE M/F/DISABILITY/VETS

Job DescriptionAbout GBG Enabling safe and rewarding digital lives for genuine people, everywhere We make it our mission to ensure more genuine people have digital access to opportunities, and businesses have access to more genuine people. Our technology draws on diverse and reliable data to create a single point of truth for identity and address verification. With over 30 years of experience behind us our team and technology are focused on enabling safe and rewarding digital lives for everyone. Regardless of age, location or background, genuine people everywhere should be able to digitally prove who they are and where they live. About the team and roleCVML Teams At the heart of GBG's Documents and Biometrics portfolio, our team focuses on creating unique and powerful artificial intelligence models. These models are designed to revolutionize KYC verification for our customers. We drive the development of these cutting-edge technologies, aiming to provide unparalleled solutions for document verification and digital trust. Collaboration is our cornerstone as we bring together diverse expertise to achieve collective success. Guided by Agile methodology, our daily operations focus on efficiency through automation. Senior Machine Learning Engineer The Senior Machine Learning Engineer is a senior individual contributor responsible for designing, developing, deploying, and continuously improving machine learning and computer vision models that power production‑grade systems. This role combines strong hands‑on technical execution with mentorship, collaboration, and data‑driven problem solving. Operating within an Agile environment, the Senior ML Engineer works closely with the machine learning team and cross‑functional partners to translate product requirements into robust ML solutions. The role requires deep expertise in modern ML and computer vision techniques, experience operating models in production, and the ability to guide junior engineers through the full ML lifecycle while driving measurable improvements in model performance and product quality. What you will do Technical Development & Innovation • Design, implement, and optimize state‑of‑the‑art machine learning and computer vision models to enhance product capabilities., • Research, evaluate, and apply modern architectures and techniques, including CNNs, transformers, and vision‑language models., • Implement and benchmark newly developed algorithms on large‑scale datasets, validating both accuracy and throughput., • Define, implement, and monitor appropriate evaluation metrics (e.g., precision, recall, ROC‑AUC, confusion matrices)., • Analyze training, test, and production data using statistical and visual techniques to identify performance gaps and reliability risks., • Support end‑to‑end ML workflows, including data preparation, training, deployment, monitoring, and iterative improvement., • Contribute to CI/CD pipelines and production monitoring to ensure reliable, reproducible, and scalable model delivery., • Mentor and support junior CVML engineers across all phases of ML projects, including planning, data collection, annotation, training, deployment, and iteration., • Participate in design reviews, technical discussions, and knowledge‑sharing initiatives to raise overall team capability., • Proactively suggest improvements to existing models, workflows, tools, and product features., • Collaborate effectively with engineering, product, and data stakeholders to deliver high‑impact ML solutions., • Maintain awareness of emerging ML and computer vision trends and assess their applicability to real‑world problems. Skills we're looking for • Bachelor’s degree or higher in Computer Science, Electrical Engineering, or a related field or equivalent experience, • Strong hands‑on experience developing and deploying machine learning models in production environments., • Advanced understanding of supervised, unsupervised, and semi‑supervised learning techniques., • Expertise in classification, regression, clustering, and anomaly detection., • Solid experience with convolutional neural networks, recurrent neural networks, and transformer‑based models., • Strong proficiency in Python (C++ is a plus) and PyTorch (TensorFlow is a plus), • Hands-on experience with modern neural network architectures and loss functions across tasks such as object detection, image segmentation, and representation learning., • Experience using computer vision and scientific computing libraries such as OpenCV., • Familiarity with model deployment, monitoring, and CI/CD workflows., • Beneficial to have experience working with large‑scale datasets and performance‑critical ML systems., • Prior experience mentoring or technically guiding other ML engineers., • Beneficial to have exposure to production MLOps practices and model lifecycle management., • Able to balances research‑driven exploration with pragmatic, production‑focused execution. To find out more As an equal opportunity employer, we are dedicated to creating a diverse and inclusive workplace where everyone feels valued and empowered. Please inform your GBG Talent Attraction Partner if you require any reasonable adjustments to the interview process. To chat to the Talent Attraction team and find out more about our benefits and why we’re a great place to work, drop an email to and we’ll be in touch. You can also find out more about careers at GBG and check out our current opportunities at gbgplc.com/careers. Unleash your potential and be part of our mission to power safe and rewarding digital lives.

Job Description POSITION SUMMARY This position is responsible for the optimization of the CNC machining process to drive machine efficiency, reduce downtime and maintain safety. Responsibilities include analyzing process performance, reducing waste, developing technical documentation, managing non-conformance, troubleshooting and ensuring compliance with OSHA safety standards. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES • Develops and maintains standard work for the machine shop., • Develops and maintains standard work programming., • Develops and maintains Continuous Improvement metrics., • Troubleshoots non-conformances and implements Root Cause and Corrective Action., • Design and Development of fixturing., • Measure and improve first pass yield., • Maintain department quality objectives., • Provide technical support for the machinist., • Diagnoses of CNC program and tooling issues., • Perform time studies to drive estimated run time improvement., • Analyzation of machine performance., • Collaborate with Manufacturing Engineering, Programming and Operations., • Implement Cycle time reduction practices., • Support legacy and new product introduction (NPI) projects working with a team of Program Managers, Project Engineers, Manufacturing Engineers and Weld Engineers to meet shipment goals., • Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors., • Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers, and collaborating with them to accomplish shared purposes and goals. QUALIFICATIONS, SKILLS, AND ABILITIES • 5+ years of experience or equivalent experience, • 3+ years of experience in a defense/aerospace-related job shop environment is a plus., • Subject matter expert in GD&T., • Experience interpreting detailed engineering drawings., • BS in Mechanical, Quality, Industrial or Manufacturing Engineering discipline or 5+ years of equivalent on the job training and experience., • Proficiency in MS Office Products, • Proficiency in SolidWorks., • Proficiency in Mastercam, • Excellent human interaction skills Granite State Manufacturing (GSM) is an equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits • Paid time off, • Floating holidays, • Paid holidays, • 401(k), • 401(k) company matching, • Dental & Vision insurance (Company paid), • Employee assistance program, • Flexible spending account, • Competitive health insurance, • Health savings account, • Life insurance, • Referral program

Job DescriptionJob Title: Staff Mechanical Engineer – Power Distribution – MN, TX, NC, NH, QC Job Description: Trystar is a leader in power inverters, distribution equipment, and related services at the heart of supporting our electrical infrastructure. Our team members focus on producing the highest quality products in the industry and providing industry-leading services. Safety and integrity are our guiding principles, and we work together to achieve excellence for our customers every day. Trystar’s team members are our most important asset. We are in search of a Staff Mechanical Engineer who will lead our design efforts in Power Conversion Solutions to exceed customer expectations & achieve strategic and aspirational growth plans while following our values & guiding principles. In this role you will get to design and coordinate large-scale engineering designs in a rapidly growing and increasingly central portion of Trystar’s enterprise-wide business strategy. The successful candidate will be able to create new designs and advise on a course of action on preexisting projects. In this role, you will act as a trusted team-mate to our R&D, internal, and external stakeholders, ensuring that we are on time, adding value beyond what is being requested, all while providing the easiest path to a solution in the industry. This position is preferably based in Burnsville, MN; Houston, TX; Charlotte, NC; Merrimack, NH; or Pointe-Claire, Québec. It requires in-person presence in the office. You will be responsible for the design and development of new technology offerings within the Research, Development & Engineering – Power Conversion team. We are looking for people who believe in our guiding principles and values of: • Safety – We believe everyone should leave Trystar facilities in the same or better condition than when they arrived., • Integrity – We’re honest, transparent, and committed to doing what’s right., • Customer focus – We have relentless focus on our customers and their success., • Right with speed – We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity., • Play for each other – We’re a team. We show up for each other and we know that through teamwork we achieve greatness., • Champion change – We know adaptation and improvement are requirements to survive and to thrive., • Enjoy the journey – We create an environment where our team feels appreciated and has fun along the way.In this role you will get to:, • Perform complete mechanical design, including layout, part/assembly modeling, drawings, and mechanical requirements definition., • Support advanced engineering analysis, including system-level thermal analysis, Finite Element Analysis (FEA), and Computation Fluid Dynamics (CFD) simulations., • Define, design, prototype, validate, and support mechanical systems for products such as Rack-Mounted equipment, modular power devices, UPS’s, Rectifiers, Inverters, and more., • Lead mechanical design reviews and provide technical guidance across multiple product lines at Trystar sites., • Work with hardware design engineers to develop PCB mounting and packaging requirements., • Develop detailed 3D CAD models and drawings, including complex surfaces, routed assemblies, and mechanical enclosures., • Collaborate with cross-functional teams (QA, Manufacturing, Assembly) to improve product designs, documentation, and manufacturability., • Design and validate assembly and test fixtures; support prototype builds and production launches., • Manage BOMs, documentation for new and existing parts, using database tools (e.g., Empower, PDM, Epicor), • Answer vendor questions regarding mechanical parts (change requests, obsolescence, substitution)., • Define and document mechanical requirements and best practices for enclosures of power conversion systems., • Contribute to efforts to standardize design practices across sites. BASIC QUALIFICATIONS • Bachelor's degree in Mechanical Engineering or an equivalent, • Minimum seven (7) years of experience as a mechanical design engineer, preferably in power electronics design/packaging., • Experience with power electronic system design (electrical enclosures, panel layout, seismic considerations, heat management) within electrical equipment, heavy industry, or military sectors., • Proficiency with major ERP and CAD systems (SolidWorks or equivalent)., • Working knowledge of industry codes and standards: ASME standards, NEMA, UL, IEC, and other applicable standards within mechanical engineering discipline., • Proficient in generating and reviewing engineering documentation including BOMs and detailed drawings for sheet metal, plastic, and extruded parts., • Proficient with Microsoft Office applications and Microsoft Cloud services., • Experience with UL 1741, CSA C22.2, and others., • Strong communications skills (oral, written, and presentation) with the ability to influence across all levels of the organization, including in-person and remote interactions., • Ability to adapt & thrive in a fast-paced/evolving work environment., • Professional Engineer (PE) license is a plus., • Ability to excel working as the sole mechanical engineer on a project., • Ability to create project requirements from incomplete inputs., • Strong understanding of structural and thermal analysis (FEA/CFD tools such as SolidWorks (Flow) Simulation, ANSYS, COMSOL, or similar).

Job DescriptionWe have an immediate opening for an EMC Test Engineer to work in a dynamic Medical Device Research and Development environment. This role will have a direct impact on ensuring that IEC 61000-4-xx EMC requirements are met. DEKA’s EMC lab services several active projects beginning with early prototype testing through Formal Verification Testing. DEKA maintains an internal test lab including a semi-anechoic chamber and works with local test labs. You will have the opportunity to shape the lab process as part of continual improvement. How you will make an impact as an EMC Test Engineer: • Work closely with device teams to become familiar with the operation and intended use of the medical devices being evaluated, • Create EMC Test Plans based on the device’s relevant industry standards, • Plan and conduct EMC testing according to the EMC test plan and test methods, • Coordinate with external test labs when necessary, some local travel required, • Record all details of testing in accordance with approved test cases and DEKA SOPs, • Write and review test reports using IEC Test Report Forms (TRF), • Create and implement test procedures including pre-test functional checks, • Use troubleshooting tools to locate problematic electrical and mechanical areas causing excessive emissions or weak immunity, • Contribute to design failure investigations, root-cause analysis and failure mitigation, • Provide design support during all phases of development and recommend appropriate investigational testing and design changes, • Maintain test equipment, lab supplies and a clean workspace, • Participate and contribute toward regulatory and agency submissions, • Lead the expansion of test capability within the lab and the continued improvement of the lab’s processesWhat you will need to be successful:, • Bachelors Degree in Electrical Engineering, • Minimum 2 years Test Engineer experience, • Experience with typical lab test equipment (Spectrum Analyzer/EMI Receiver, Oscilloscope, signal generators, Antennas, Amplifiers, etc.), • Broad measurement instrument knowledge, • Familiarity with the IEC 61000-4-xx series of EMC test standards and their test methods, • Knowledge of IEC 60601-1-2 a plus, • Basic rework skills including soldering and general mechanical, • Ability to read and understand electrical schematics and mechanical drawings, • Demonstrated ability to set up and solve engineering problems, • Ability to work as part of an interdisciplinary team, • Self-motivated and able to self-prioritize, • Ability to clearly explain objectives, • Ability to complete all tasks that require the use of a computer and office equipment, • Ability to move throughout the building and grounds and communicate with employees, customers and others, • Ability to move items weighing up to 30 lbs Behind DEKA’s brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored. Powered by JazzHR bMtgmnms29

Job Description COMPANY OVERVIEW: Merrimack Manufacturing is a medical device manufacturer located in the Manchester Millyard. We are a growing manufacturing company that will play a crucial part in bringing innovative and life changing products to life. POSITION OVERVIEW: This position will help manage and improve the overall quality of our supply chain partners, and help ensure that we are compliant to ISO 13485 and FDA requirements as relates to our suppliers and supplied parts. This position will be part of our Quality team, and will work extremely closely with our Incoming Inspection, Engineering and Material Management team. This role will be the primary driver of disposition and closure of Supply based NCR activity. This role will also weigh in on all matters pertaining to quality, engineering and continuous improvement throughout the product lifecycle. RESPONSIBILITIES: • Assist inspection with evaluating cosmetic specifications and other intricate component requirements requesting input and communication with QE/ME as needed., • Interface with Incoming Inspection, discuss results, document disposition and required approvals to ensure timely closure of Nonconformance Reports., • Serve as key contributor at weekly Incoming Inspection NCR MRB meeting., • Utilize relationships with MMC incoming inspection group and the supplier to investigate differences between measurements., • Communicate failures to suppliers, request SCARs where necessary and document effectiveness of corrective actions., • Work with Supply Chain to attain RMA numbers, ensure dispositions are carried out per NCR approval., • Generate and Distribute Scorecards to suppliers, • Conduct ASL updates in MMC PLM system for new suppliers, Supplier Change Notifications etc., • Interface with suppliers, Manufacturing Engineers and Quality Engineers to evaluate potential component issues. Walk down MMC processes vs supplier processes and determine root cause., • Work with Supplier Development and Sr. SQE to schedule telecons, investigate process control issues or breakdowns, identify high-risk suppliers, schedule for cause audits, etc., • Facilitate the review and approval of supplier-initiated changes requests, and communicate the approved changes through Quality and to the appropriate departments., • Look for opportunities to drive preventive actions and continuous process improvement with our suppliers., • Assist as needed with customer audits and regulatory audits., • Provide recommendations for improvements and help drive best practices to SOPs pertinent to QA GMP Compliance activities. QUALIFICATIONS AND SKILLS: • 2+ years of experience in a Quality Assurance role, or with a medical device manufacturing company, • Experience as a certified quality auditor or supplier auditor is a plus, • Familiarity with ISO 13458:2016 and FDA 21 CFR Part 820, • Detail-oriented with strong verbal and written communications skills; demonstrated ability to manage multiple projects/tasks, • A demonstrable ability to work with cross-functional teams comprised of members within and outside of our organization, • Ability to work with CAD files and interpret mechanical drawings, • Ability to analyze data for accuracy and correctly interpret results, • Microsoft Office proficiency Powered by JazzHR XU7Bgd1OUl

Job Description DEKA has an exciting position for a Product Development Automation Engineer. How you will make an impact: As a member of the DEKA team, the Product Development Automation Engineer will work as member of DEKA’s innovative product design teams to specify, engineer, integrate, validate and support automated manufacturing equipment for the mass production of DEKA’s innovations. • Specify, design and manage control and data acquisition systems including electrical, pneumatic, communication and data storage functions, for new and existing production equipment, • Interact daily with large automation equipment integrators including progress tracking and technical and program issues are quickly resolved, • Develop robust cutting-edge manufacturing techniques for high-volume use, • Generate and maintain validation lifecycle documentation, • Effectively and proactively identify root-causes of observed issues or control systems risks, then complete robust, sustained corrective actions, • Utilize machine data and database elements to develop visible process performance tools for engineering and operations daily process monitoring, • Bachelor's Degree in Electrical Engineering, Controls Engineering or equivalent experience, • 5 years of experience with PLC programming, vision systems, and controls troubleshooting in a highly regulated medical manufacturing environment preferred, • Knowledge of and ability to use RS232, Ethernet/IP, and remote I/O communications protocols, • Demonstrated proficiency with Keyence, Cognex, Teledyne, or similar vision systems, • Understanding of and/or ability to use JAVA, Python, SQL and/or Visual Basic, • Understanding and ability to use Excel, Word, Access, and all related computer software for machine design, programming, backup, and monitoring, • Experience with various sensor technologies including but not limited to 0-20ma, 4-20ma, 0-5VDC, and 0-10VDC analog signals, • Excellent interpersonal, verbal and written communication skills One hour from the beach, Boston, and the mountains, the historic Amoskeag Millyard once housed the largest textile mills in the world. It is now home to DEKA Research and Development, where we are taking the same innovation and cutting-edge technology into the modern age. Behind DEKA’s brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored. Powered by JazzHR XDlDbp0J1N

Job DescriptionWe are seeking a Manufacturing Engineer to drive process development, build execution, and the transition to scalable manufacturing for complex mechanical and electromechanical assemblies. This is a critical, cross-functional role that collaborates internally with engineering, supply chain, and operations teams, as well as externally with suppliers, partners, and customers. How You Will Make an Impact as a Manufacturing Engineer: • Develop and maintain essential manufacturing documentation including Bills of Materials (BOMs), line layouts, assembly instructions, fixtures, pFMEAs, and production control methods., • Plan, lead, and execute pre-production builds with a long-term vision for scalable, high-volume production., • Collaborate closely with design and engineering teams to ensure products are robust, reliable, and ready for manufacturing., • Consult with suppliers to define product specifications, and partner with the supply chain team to procure required equipment, materials, and parts., • Interface with manufacturing partners throughout the design transfer process to ensure on-time delivery of high-quality products that meet all performance criteria.Skills you will need to be successful in this role:, • B.S. in Mechanical or Manufacturing Engineering with 2–5 years of experience, or A.S. degree with 3–6 years of experience. Strong candidates with less experience may be considered., • Experience with electromechanical assembly and manufacturing process development., • Working knowledge of Lean Manufacturing, Six Sigma, or green manufacturing principles is a plus., • Proficiency in CAD software; SolidWorks preferred., • Familiarity with ERP systems is a plus., • Experience in medical device manufacturing is highly desirable., • Proven ability to set up manufacturing assembly lines with an eye toward scalability and efficiency., • Strong understanding of component forming processes, assembly operations, production line optimization, and design for manufacturability., • Demonstrated passion for solving complex engineering problems and a curiosity for understanding how things work. One hour from the beach, Boston, and the mountains, the historic Amoskeag Millyard once housed the largest textile mills in the world. It is now home to DEKA Research & Development, where we are taking the same innovation and cutting-edge technology into the modern age. Behind DEKA’s brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored. Powered by JazzHR YVAFsGbqfF

Job Description We are seeking a Senior Electrical Engineer with medical device product development. This is an onsite 5 day a week role. The Senior Electrical Engineer will be responsible for the concept, development, and production-related activities of embedded electrical circuit designs within a multi-disciplinary project team. The candidate should be familiar with a broad range of electrical engineering design concepts from low-level analog to high-speed digital circuitry. This position requires a fair amount of autonomy and clever thinking as our projects involve inventing new and better ways of solving the many engineering challenges that projects are confronted with. How you will make an impact as a Senior Electrical Engineer: • Design and develop circuit boards containing a mix of analog and digital circuitry through the creation of schematics, management of the PCB layout, and DFx activities, • Perform testing, debug, and failure analysis of circuitry as well as the creation of test fixtures to aid in both the development and production of circuit boards, • Create clear and concise documentation including block diagrams, electrical requirements, design descriptions, test procedures, and failure analysis procedures, • Develop and design new prototype devices using originality and ingenuity, • Decompose system requirements to derive electrical specifications and architectures, • Apply experience with electronic design techniques and integration to solve complex problems, • Work in a team environment with mechanical, controls, systems, software, and test engineers to facilitate rapid development cycles, • Understand and follow processes, design control practices, and documentation requirements, • Manage external design partners and suppliers, • Manage your time effectively across multiple assignments of varying scope and complexity, • Provide subject matter expertise and cross-functional contribution across the company To be successful in this role as a Senior Electrical Engineer, you will need the following skills and experience: • BS in Electrical Engineering required, • Must have a minimum of 5 years of experience in the development of complex electro-mechanical devices, • Demonstrated experience in development of electrical circuit board schematics and PCB layouts (Altium preferred), • Demonstrated electrical design experience from concept through production, • Experience working in multi-disciplinary engineering teams to solve complex problems through iterative system design, integration, and test, • Must be skilled in writing and working with specifications and detailed design documents, • Proficient in debugging circuitry through hands-on testing, analysis and analog/digital simulation, including the use of common electrical test equipment (DMMs, oscilloscopes, logic analyzers, waveform generators, etc.), • Experience mentoring junior engineers, • Experience in development, characterization, and analysis of novel sensor designs, • Solid grasp of signal integrity, signal timing, power consumption, and design for ESD and EMC compliance, • Experience with RF design and test practices a plus, • Must be able to set priorities and work independently under aggressive timelines and date-driven schedules, • Knowledge of analytical computing software (MATLAB, Python, Labview, etc.) for measurement automation and data analysis, • Experience with embedded software development in C/C++ for common microcontroller platforms (ARM, PIC, AVR, etc.) a strong plus, • Familiarity with electrical safety and medical device product design standards and practices (IEC 60601-1, ISO 13485, and other applicable standards) a plus, • Effective written and verbal communication

Job Description Job Title: Senior Electrical Engineer Location: Burnsville and/or Faribault, MN Job Description: Trystar is at the forefront of delivering innovative power solutions, built on a foundation of safety, integrity, and customer focus. As we continue to grow and scale, we are looking for a Senior Electrical Engineer who is not only technically strong, but also a force multiplier – someone who elevates the performance of the entire team through mentorship, process improvement, and scalable engineering solutions across Trystar’s diverse product portfolio. This position will play a critical role in developing accurate, well-defined engineering solutions for complex customer requests, ensuring that high-value custom projects move smoothly through the quoting and order process. The Senior Electrical Engineer will work closely with Sales, Applications, Engineering, and manufacturing to translate unique customer requirements into feasible, manufacturable designs while maintaining efficiency, accuracy, and standardization. Our cutting-edge headquarters in Faribault, MN is partially solar- and wind-powered by our own microgrid! You’ll find that we’re also pushing boundaries across the country at our additional facilities in Troy, MI; Houston, TX; Merrimack, NH; Burnsville, MN; Murfreesboro, TN; Waukesha, WI; & in Montreal, Canada. Together, we are Trystar, where we power the future and nurture innovation for a brighter tomorrow. Why Join Trystar? • Be a key technical resource for complex, high-value customer projects that require deep electrical expertise and cross-functional collaboration., • Improve the accuracy and efficiency of the custom quoting process, helping Trystar scale without increasing lead times or engineering bottlenecks., • Work on a wide range of power distribution products, from switchgear and load banks to docking stations and battery storage solutions.We are looking for people who believe in our guiding principles and values of:, • Safety – We believe everyone should leave Trystar facilities in the same or better condition than when they arrived., • Integrity – We’re honest, transparent, and committed to doing what’s right., • Customer focus – We have relentless focus on our customers and their success., • Right with speed – We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity., • Play for each other – We’re a team. We show up for each other and we know that through teamwork we achieve greatness., • Champion change – We know adaptation and improvement are requirements to survive and to thrive., • Enjoy the journey – We create an environment where our team feels appreciated and has fun along the way.In this role you will get to:, • Design custom power distribution equipment following UL 1008, UL 508, UL 891 and UL 1558 standards., • Support and lead the custom quoting and order process, ensuring technical feasibility and compliance with listings, code, and customer specifications., • Provide electrical engineering expertise across a wide range of Trystar products, ensuring custom designs align with best practices and manufacturability., • Refine and document quoting processes to improve efficiency and reduce engineering cycle time for custom orders., • Collaborate with Sales, offering owners, application engineers, and manufacturing to bridge the gap between customer requirements and practical, buildable solutions., • Identify common customizations and work toward streamlining configurations to improve quoting speed and accuracy., • Drive impact beyond individual contributions by enabling others to move faster, make better decisions, and deliver higher-quality work., • Act as a technical mentor to engineers and sales team members, helping improve internal understanding of complex power distribution solutions., • Bachelor's degree in Electrical Engineering or equivalent., • 7+ years of experience in electrical system design, power distribution, and quoting and order support for custom—engineered products., • Proficiency with electrical design software such as AutoCAD Electrical, SolidWorks Electrical, EPlan, or similar design software., • Ability to interpret customer specifications and site requirements to create accurate electrical solutions., • Excellent problem-solving skills and the ability to balance customer customization with standardization for efficiency., • Experience defining electrical specifications and component selection for power distribution offerings including switchgear, switchboards, transfer switches, load banks, and generators., • Experience with creation of detailed technical product documentation to support product manufacturing, functional testing, certification testing, and customer requests., • Ability to specify safe and effective testing practices for powered prototype testing., • Excellent communication and interpersonal skills to effectively collaborate with cross-functional teams, suppliers, and internal stakeholders., • Strong attention to detail and commitment to design accuracy., • Curiosity and initiative to explore new technologies, solve problems independently, and continuously improve designs and processes., • Understanding and application of electrical design best practices, including safety, manufacturability, and compliance with relevant codes and standards., • Ability to identify inefficiencies and drive continuous improvement in engineering workflows, documentation, and cross-functional collaboration., • Experience improving engineering efficiency through automation, modularization, or process standardization., • ERP, PLM, and Engineering Vault experience for managing electrical design documentation and BOMs., • NFPA 70E Certification or experience working with medium-voltage systems., • Experience working with standards such as UL 1008, UL 508, UL 891 and UL 1558., • Project management experience, including the ability to lead cross-functional teams, track project timelines, and ensure deliverables are met on schedule., • Strong leadership skills, with a proven ability to mentor engineers and collaborate across multiple departments., • Experience leading or contributing to continuous improvement initiatives (e.g., Kaizen events, process audits, design standardization), • Familiarity with design for reliability, design for testability, or design for manufacturability (DFM), • Exposure to root cause analysis and corrective action processes related to electrical design or production issues., • Interest in emerging technologies in power distribution, energy storage, or smart grid systems., • Proven ability to act as a technical multiplier – improving team velocity through reusable tools, documentation, or mentoring., • Experience creating frameworks, templates, or automations that reduce repetitive work and improve consistency across engineering teams.

Job DescriptionDescription: Hybrid every other week onsite in Merrimack, NH Our client engages product-aware engineers to build omni-channel, consumer-grade Android experiences. Teams deliver features end to end, influence platform standards, and iterate quickly while upholding accessibility, security, and performance. The environment values mentorship, collaboration, and continuous learning across modern mobile architectures and tooling. Due to client requirements, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $60.00 to $70.00/hr. w2 Responsibilities: Responsibilities • Build and enhance Android features from concept through deployment using Kotlin, Jetpack Compose, and MVVM., • Collaborate with architecture, security, and design to deliver compliant, accessible, and user-centered mobile experiences., • Define and promote mobile engineering standards, protocols, and tooling across platform squads., • Provide mobile thought leadership to advance outcomes and champion a mobile-first approach., • Mentor and lead Android developers through design reviews, code reviews, pull requests, and pair programming., • Implement and optimize CI/CD pipelines and automation using tools such as Jenkins, DevOps platforms, and Artifactory., • Integrate and consume RESTful services with robust error handling and resiliency patterns., • Establish strong logging, monitoring, and crash analytics with platforms such as Splunk, Datadog, and Firebase Crashlytics., • Apply trunk-based development, feature toggles, and branch-by-abstraction to support rapid, stable releases., • 10+ years of professional Android development with Kotlin, including public app releases to the Google Play Store., • Strong proficiency with Jetpack Compose and Android Studio/JetBrains toolchain., • Fluency in object-oriented and functional programming patterns for Android., • Leadership experience guiding Android teams in architecture, design decisions, code reviews, and pair programming., • Proven mentoring and coaching of Android engineers., • Deep knowledge of MVVM architecture and reactive patterns., • Excellent understanding of consuming RESTful web services., • Experience with CI/CD and automation using Jenkins, DevOps tooling, and Artifactory., • Hands-on testing experience with modern Android testing frameworks, including Compose testing and Maestro, with a DevSecOps focus., • Strong understanding of Google accessibility features and accessible app development., • Good understanding of dependency management for Android projects., • Experience with observability and crash reporting using Splunk, Datadog, and Firebase Crashlytics., • Experience operating within agile sprints and fast release cadences. W2 employees of Eliassen Group who are regularly scheduled to work 30 or more hours per week are eligible for the following benefits: medical (choice of 3 plans), dental, vision, pre-tax accounts, other voluntary benefits including life and disability insurance, 401(k) with match, and sick time if required by law in the worked-in state/locality. If anyone reaches out to you about an open position connected with Eliassen Group, please ensure that you are working directly with us by confirming the following: · When you work with Eliassen Group, all email communication will come from an Eliassen.com address, never Gmail, Yahoo, etc. · Eliassen Group will never ask you for personal information (home address, bank account, or check routing number) until you have worked with someone clearly associated with Eliassen Group. If you have any indication of fraudulent activity, please contact . About Eliassen Group: Eliassen Group is a strategic consulting firm that helps organizations reach further and achieve more through our technology, business advisory, and life sciences solutions. For nearly 40 years, we have combined exceptional people, deep domain expertise, and intelligent capabilities to expand our clients’ capacity and accelerate meaningful outcomes. We are driven by a purpose to positively impact the lives of our employees, clients, consultants, and the communities we serve. Eliassen is committed to building a diverse and inclusive team from a variety of backgrounds, perspectives, and skills. We are an Equal Opportunity and Affirmative Action Employer and all employment decisions are based on merit, performance, and business needs. Eliassen does not discriminate on the basis of race, color, gender identity or expression, sexual preference or orientation, sex (including pregnancy, childbirth, and related medical conditions), marital status, creed, religion, physical or mental disability, genetic information, military or veteran status, age, ancestry, national origin, citizenship status, prohibited criminal record inquiries of applicants and employees, or any other category protected by federal, state, or local laws. Don’t miss out on our referral program! If we hire a candidate that you refer us to then you can be eligible for a $1,000 referral check!

Job Description Hazen and Sawyer is seeking a Mid-Level Electrical Engineer for our Manchester, NH office. As part of our Electrical team you will have exceptional opportunities to provide superior solutions to our clients’ most difficult problems through a variety of water related assignments. Qualified candidates will provide electrical engineering and design for water and wastewater facility projects. Join us in delivering exceptional results and continuous building of our reputation for excellence in the industry. We believe in fostering a dynamic and supportive environment, where you can grow and make a significant impact. So, if you’re ready to join a team that values innovation and excellence, we would love to hear from you! Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Candidate will serve as the lead electrical engineer on projects for water and wastewater facilities., • Qualified candidate should have knowledge in industrial power design, including medium and low voltage electrical power distribution, motor control, VFDs, lighting systems, equipment layout and related activities., • Candidate should have a good working knowledge of the NEC and related Codes., • Candidate must also have good communication skills, including interaction with clients and contractors., • AutoCAD experience is a must, • Professional Engineering License is required., • Revit BIM software and SKM power systems software is desirable., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description POSITION SUMMARY Oversee the creation, development, implementation and control of manufacturing details to produce complex assemblies. Position requires cross functional collaboration with procurement, machining, weld, paint and quality departments to drive safety, meet quality and delivery requirements, and ensure efficiency to meet cost targets. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES • Define and develop manufacturing processes., • Create manufacturing routers based on product requirements and best practice., • Create and maintain manufacturing work instructions., • Establish control plans for critical features and special processes., • Define inspection requirements to ensure compliance with customer requirements., • Champion process development and improvement to quality and efficiency., • Determine and eliminate root cause of quality defects, • Develop tools, fixtures and test equipment required for manufacturing., • Create Quote details for new and re-occurring orders., • Support legacy product and New Product Introduction (NPI), working with a team of Program Managers, Project Engineers and Quality Engineers to meet shipment goals., • Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety guidelines., • Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers, directors and workers, collaborating with them to accomplish shared purposes and goals. QUALIFICATIONS, SKILLS, AND ABILITIES • 3+ years of experience developing manufacturing processes for machining, welding and/or electromechanical assembly., • Experience with manufacturing processes to include CNC machining, welding, inspection and assembly., • Understanding of GD&T and experience interpreting detailed engineering drawings., • Experience with project management responsibilities., • 3+ years of experience in a defense/aerospace-related job shop environment is preferred., • BS in Mechanical, Industrial or Manufacturing Engineering discipline or 3+ years of equivalent on the job training and experience., • Proficiency in MS Office Products, • Demonstrated proficiency in SolidWorks., • Excellent human interaction skills Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits • Paid time off, • Floating holidays, • Paid holidays, • 401(k), • 401(k) company matching, • Dental & Vision insurance (Company paid), • Employee assistance program, • Flexible spending account, • Competitive health insurance, • Health savings account, • Life insurance, • Referral program

Job Description POSITION SUMMARY This position is responsible for the design, implementation, and optimization of the CNC machining process to drive machine efficiency, reduce downtime and maintain safety. Responsibilities include analyzing process performance, reducing waste, developing technical documentation, reduction of non-conformance, collaborating with cross-functional teams, troubleshooting issues and ensuring compliance with OSHA safety standards. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES • Develops and maintains standard work for the machine shop., • Develops and maintains standard work programming., • Develops and maintains Continuous Improvement metrics., • Troubleshoots non-conformances and implements Root Cause and Corrective Action., • Design and Development of fixturing., • Measure and improve first pass yield., • Maintain department quality objects., • Provide technical support for the machinist., • Diagnoses of CNC program and tooling issues., • Perform time studies to drive estimated run time improvement., • Analyzation of machine performance., • Liaison between Engineering, Programming and Operations., • Cycle time reduction., • Serve as the company subject matter expert concerning new machining technologies and equipment to reduce costs through efficiency., • Support legacy and new product introduction (NPI) projects working with a team of Program Managers, Project Engineers, Manufacturing Engineers and Weld Engineers to meet shipment goals., • Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors., • Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and staff, collaborating with them to accomplish shared purposes and goals. QUALIFICATIONS, SKILLS, AND ABILITIES • 5+ years of experience developing manufacturing processes for machining, • 3+ years of experience in a defense/aerospace-related job shop environment., • Subject matter expert in GD&T., • Experience interpreting detailed engineering drawings., • BS in Mechanical, Quality, Industrial or Manufacturing Engineering discipline or 5+ years of equivalent on the job training and experience., • Proficiency in MS Office Products, • Proficiency in SolidWorks., • Proficiency in Mastercam, • Excellent human interaction skills Granite State Manufacturing (GSM) is an equal-opportunity employer. GSM does not discriminate based on race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits • Paid time off, • Floating holidays, • Paid holidays, • 401(k), • 401(k) company matching, • Dental & Vision insurance (Company paid), • Employee assistance program, • Flexible spending account, • Competitive health insurance, • Health savings account, • Life insurance, • Referral program

Job Description InnoTECH Staffing is looking to hire a Senior Test Engineer to work in a dynamic medical device R&D environment. This is a high visibility role with a direct impact on the success of our projects. It will be a great opportunity to work on some amazing projects that make a positive impact on the world. This requires being onsite 5 days a week in Manchester, NH. There is no sponsorship. How you will make an impact as a Senior Test Engineer: * Writing test plans, test procedures and other activities involving performance, durability, and reliability assessments * Understand device design and core technologies in order to inform test method development * Determining test coverage for revisions to design * Creating and evaluating test fixtures needed for product design verification * Contributing to design failure investigations that may impact Risk Assessment, Hazard Analysis, and FTAs * Participating and contributing toward regulatory and agency submissions * Authoring Quality Plans, Test Summaries, and other documents What you need to be successful Senior Test Engineer: * BS in Biomedical, Mechanical and/or Robotics/ Automation Engineering * 3+ years' experience testing electro-mechanical devices (medical devices preferred) * Must have laboratory/ wet lab skills and experience * Must have fluid system handling experience * Leadership and/or mentoring experience * Knowledge and deep understanding of engineering fundamentals * Capability to create and clearly explain team objectives and write procedures for others to follow * Demonstrated problem solving ability and techniques * Ability to work as part of an interdisciplinary team * Self-motivated and able to self-prioritize * Must have excellent verbal and written communication skills Preferred skills and experience: * Knowledge of FDA Quality System Regulations (QSRs) and/or ISO 13485, and other medical device industry experience * Experience with research, development, and product testing * Experience writing procedures for others to follow * Experience with data and failure analysis * Broad measurement instrument knowledge

Job DescriptionWe are looking for a Process Controls Engineer to own the design, integration, and qualification of high purity water subsystems embedded within a complex, multi-disciplinary regulated device platform. You will play a critical role in ensuring onboard water purity performance, subsystem reliability, and regulatory compliance across the full device development lifecycle. How you will make an impact as a Process Controls Engineer: • Define process control architecture for onboard high purity water generation, purification, storage, distribution, and quality monitoring systems, and develop control specifications that drive consistency and compliance across the subsystem and its interfaces with the broader device., • Architect control interfaces between the water subsystem and the host device's embedded controls, sensor networks, onboard diagnostics, and cloud monitoring platforms., • Own subsystem requirements and control narratives end-to-end, from concept through IQ/OQ/PQ qualification and routine water quality monitoring., • Lead hazard analysis and risk management per ISO 14971, identifying and mitigating risks to water purity integrity, sterility, device performance, and patient safety., • Drive subsystem validation strategies covering statistical process control, data integrity (21 CFR Part 11), conductivity and TOC monitoring, microbial and endotoxin control, WFI qualification, and fluid pathway integrity testing., • Guide cross-functional teams across fluidics, electrical, embedded software, and manufacturing, balancing purity performance against device-level SWaP, cost, and manufacturability constraints., • Contribute to DHF documentation, PFMEA reviews, design reviews, and traceability matrices throughout the device development program., • Support program management by estimating effort, surfacing technical risks, and aligning project plans with qualification and regulatory milestones.Required Qualifications:, • BS or MS in Controls Engineering, Chemical Engineering, Mechanical Engineering, Biomedical Engineering, or related discipline., • 2+ years in a regulated device development environment with hands-on experience designing, integrating, and qualifying high purity water or fluid handling subsystems., • Working knowledge of WFI and purified water generation technologies (RO, EDI, ultrafiltration, distillation), onboard distribution system design, and inline water quality monitoring., • Regulatory fluency across USP <1231>, USP <645>, USP <643>, USP <85>, 21 CFR Parts 210/211/820, 21 CFR Part 11, GAMP 5, ISO 13485, and ISO 14971., • Hands-on experience with FMEA, DFMEA, PFMEA, hazard analysis, and IQ/OQ/PQ protocol development and execution., • Proven ability to guide cross-functional teams and drive alignment across quality, regulatory, fluidics, software, and manufacturing stakeholders., • Strong written and verbal communication skills with the ability to support presenting complex subsystem data to regulatory bodies and executive leadership.Preferred Qualifications:, • Experience with onboard WFI generation and sterile water subsystems within aseptic processing or drug delivery devices., • Familiarity with cloud-connected water quality monitoring, remote diagnostics, and cybersecurity considerations for networked subsystems., • Experience supporting FDA or EMA regulatory inspections related to high purity water system qualification and monitoring., • Knowledge of SWaP-optimized purification technologies and miniaturized onboard water system design. Behind DEKA’s brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored. Powered by JazzHR eknvJLK0nR

Job DescriptionAs a member of the Manufacturing Engineering team, the Engineering Technician will provide direct technical support to the Production Operations and Manufacturing Engineering teams within daily business operations. • Act as accountable technical team member for process yield performance on for a limited production area., • Provide hands-on technical support to operations for manufacturing issues directly within a clean-room environment., • Support and facilitate productivity and throughput improvement projects to achieve target process run rates., • Perform hands-on failure analysis and investigation to process nonconformities., • Report-out to production line team on details of technical investigation through clear, thorough and specific documented feedback., • Work with engineering team resources to develop and implement process improvement projects., • Design, develop and fabricate simple manufacturing tools, fixtures and devices., • Collaborate with vendors, suppliers and other company team members for engineering projects., • Associates Degree in Engineering, Mechatronics or other technical field, • 1+ years’ experience in technical, hands-on problem solving role in a highly regulated environment, medical preferred., • Demonstrated, hands-on skills with electrical, mechanical, pneumatic or hardware troubleshooting, • Knowledge and ability to read blueprints, drawings., • Experience with Lean and/or structured problem solving tools, • Demonstrated skills to provide basic data analysis and reporting, • Demonstrated skills with MS Office applications, • Superior verbal and written communication skills, • Excellent interpersonal skills 9uK3TJx9GE

Civil Engineer Project Manager. Civil Engineer Project Manager | Bedford, NH | Hybrid. VHB's Bedford, NH office is looking for an experienced Civil Engineer - Project Manager to join our growing Land Development team and help shape the future of communities across New Hampshire and New England regio

Your new responsibilities About OSRAM SYLVANIA Automotive Lighting OSRAM SYLVANIA, together with OSRAM GmbH, is the world leader in automotive lighting for original equipment manufacturers (OEMs) and the aftermarket. This role is responsible for overseeing manufacturing processes for automotive ligh

A leading tech firm is looking for a skilled Solution Architect to join their Services team. This is a remote-first position with occasional travel, offering a competitive salary range of $114k to $150k plus a bonus structure.

Assist in the preparation of permitting, design, and construction documents Manage tasks and projects and monitor project financial performance Utilize AutoCAD Civil 3D to develop and manage model‑based design deliverables, including surfaces, grading models, pipe networks, and plan/profile prod

The Role The Fidelity Institutional Wealth Management Services (IWMS) group is seeking an experienced Senior Software Engineer – Production Support to help maintain and enhance the stability, performance, and reliability of IWMS client platforms and offerings. Responsibilities Dedicated to comple

Job Description:Note: Fidelity will not provide immigration sponsorship for this positionPrincipal AI Site Reliability Engineer, EI Production ServicesThe RoleThe EI Production Services organization at Fidelity is seeking a strategic and proactive Principal AI Site Reliability Engineer (

A leading engineering firm is seeking a Senior Structural Engineer for a remote, part-time role.

Our SI&R team partners with both public and private sector clients to manage properties impacted by hazardous substances and petroleum releases. As part of our national practice, youll have the opportunity to work on diverse projects across multiple jurisdictions throughout the United States, collab

A desire to effect positive change.That's what it takes to work at Fuss & O'Neill - because that's what we do for the communities in which we work: we create, innovate, and design long-lasting improvements that improve quality of life.Quality of life is also important on the job, so we've prioritize

Transportation Design Engineer - Project Manager Department: Transportation Employment Type: Full Time Location: Manchester, NH Compensation: $120,000 - $135,000 / year Description Creativity.A desire to effect positive change.That’s what it takes to work at Fuss & O’Neill – because that’s w

Senior Structural Engineer – Part Time Role: Senior Structural Engineer (Temp / Part‑time) Location: Remote (MA/RI/NH region) with occasional travel to client sites. We are seeking a Senior Structural Engineer to join our dynamic and growing Structures group on a temp/flexible basis. Seniority

Job Description Company Overview Tech NH, Inc. has a rich history rooted in innovation and quality within the plastics industry. Since its inception, the company has grown from prototype development to a comprehensive full-service organization specializing in injection molding, mold making, and product design, serving diverse industries with a focus on excellence and customer satisfaction. Position Summary The Engineering Program Manager is a plastics engineering role with full lifecycle accountability for new product introduction (NPI) programs. This individual is responsible for driving new injection molded programs from concept through tool build, validation, production release, and beyond — ensuring technical integrity, disciplined execution, and on-time/on-budget launch. This role is fundamentally engineering-centric. The Program Manager leads part DFM, mold design direction, validation strategy, and processing readiness. The role also requires proactive identification and execution of all cross-functional activities required for production release. Support functions (Quality Engineering, Regulatory, Document Control, Quoting, Customer Service) exist to assist — but the Engineering Program Owner is accountable for ensuring all required activities are identified, directed, and completed. If it affects successful production release, it falls within this role’s ownership. Core Responsibilities 1. Technical Leadership (Foundation of the Role) • Lead customer-facing part Design for Manufacturability (DFM) reviews, • Provide actionable feedback on part geometry, tolerances, material selection, and risk, • Define mold construction requirements and review mold designs, • Guide tool build strategy for manufacturability, longevity, and cost control, • Develop validation approach (IQ/OQ/PQ, FAI, capability studies as applicable), • Lead mold sampling and processing readiness activities, • Identify and mitigate technical risk early in program lifecycle, • Serve as primary technical authority for assigned programs 2. Program Ownership & Execution Leadership (Critical) • Own the program timeline from concept through production release, • Develop and maintain structured program plans and risk registers, • Identify all cross-functional deliverables required for release, • Drive accountability across Tooling, QC, Production, Customer Service, and Accounting, • Conduct structured stage-gate readiness reviews, • Proactively identify dependencies 60–90 days ahead of impact, • Escalate risks early with proposed mitigation strategies 3. Customer & Commercial Interface • Serve as primary technical contact for customer engineering teams, • Communicate program status, risks, and schedule updates, • Manage scope changes and engineering change impacts, • Provide technical input for quotations (cycle time, material usage, tooling complexity), • Understand margin implications of engineering and timeline decisions 4. Tooling & Development Oversight • Issue technical specifications for mold quoting and fabrication, • Monitor tool build progress against schedule and risk, • Coordinate mold trials and validation runs Position Summary The Engineering Program Manager is a plastics engineering role with full lifecycle accountability for new product introduction (NPI) programs. This individual is responsible for driving new injection molded programs from concept through tool build, validation, production release, and beyond — ensuring technical integrity, disciplined execution, and on-time/on-budget launch. This role is fundamentally engineering-centric. The Program Manager leads part DFM, mold design direction, validation strategy, and processing readiness. The role also requires proactive identification and execution of all cross-functional activities required for production release. Support functions (Quality Engineering, Regulatory, Document Control, Quoting, Customer Service) exist to assist — but the Engineering Program Owner is accountable for ensuring all required activities are identified, directed, and completed. If it affects successful production release, it falls within this role’s ownership. Core Responsibilities 1. Technical Leadership (Foundation of the Role) • Lead customer-facing part Design for Manufacturability (DFM) reviews, • Provide actionable feedback on part geometry, tolerances, material selection, and risk, • Define mold construction requirements and review mold designs, • Guide tool build strategy for manufacturability, longevity, and cost control, • Develop validation approach (IQ/OQ/PQ, FAI, capability studies as applicable), • Lead mold sampling and processing readiness activities, • Identify and mitigate technical risk early in program lifecycle, • Serve as primary technical authority for assigned programs 2. Program Ownership & Execution Leadership (Critical) • Own the program timeline from concept through production release, • Develop and maintain structured program plans and risk registers, • Identify all cross-functional deliverables required for release, • Drive accountability across Tooling, QC, Production, Customer Service, and Accounting, • Conduct structured stage-gate readiness reviews, • Proactively identify dependencies 60–90 days ahead of impact, • Escalate risks early with proposed mitigation strategies 3. Customer & Commercial Interface • Serve as primary technical contact for customer engineering teams, • Communicate program status, risks, and schedule updates, • Manage scope changes and engineering change impacts, • Provide technical input for quotations (cycle time, material usage, tooling complexity), • Understand margin implications of engineering and timeline decisions 4. Tooling & Development Oversight • Issue technical specifications for mold quoting and fabrication, • Monitor tool build progress against schedule and risk, • Coordinate mold trials and validation runs, • Ensure development learnings are captured and implemented 5. Quality & Production Integration • Define inspection requirements and validation deliverables, • Review FAI and validation reports prior to submission, • Support production troubleshooting during launch phase, • 7–12+ years of hands-on injection molding engineering experience, • Demonstrated experience with:, • Plastic part DFM, • Mold design review and tool build oversight, • Mold sampling and processing, • Validation strategy (IQ/OQ/PQ, PPAP preferred), • Proven experience driving programs from concept through release, • BS in Mechanical, Plastics, or Manufacturing Engineering (or equivalent experience), • Experience in medical or regulated manufacturing environment preferred, • Strong understanding of injection molding materials and process behavior, • Excellent organizational and communication skills, • High accountability mindset, • Behavioral Characteristics Required for Success, • Naturally proactive and risk-aware, • Comfortable leading cross-functional teams without direct authority

Job DescriptionDescription: Summary: Haigh-Farr is a premier antenna design, manufacturing and test house developing products used across all platforms in the aerospace industry including missions to Mars, the International Space Station and products fielded to the U.S. Military supporting the warfighter. In our over 55-year history we have enjoyed steady, planned growth. Haigh-Farr plans to further grow our team and capabilities to meet increasing demand and to expand into new markets and antenna technologies. Haigh-Farr is seeking an FPGA/FW Engineer to assist in the design and development of our Electronically Scanned Array (ESA) products within our Advanced Products Group. This role would bridge the hardware and software engineering domains and ensure the FPGA logic and embedded software work together seamlessly in our applications. Responsibilities: • Design, code, simulate, document and test full high-speed FPGA systems, • Troubleshoot complex systems, optimize for speed, power and ensure compliance with specifications, • Build and maintain tools and processes for FPGA development, • Partner with hardware, software and system teams to ensure seamless integration, • Produce technical documentation for designs and integration processes, • Work closely with others within your department to understand requirements and meet customer expectations, • Address unforeseen issues to realize scheduled project timeline Requirements: Knowledge & Skills: • FPGA design using SystemVerilog/Verilog or VHDL, preferably SystemVerilog, • Simulation tools (Modelsim, Vivado XSim), UVM experience a plus, • Familiarity with lab equipment: Oscilloscopes, Logic Analyzers, Spectrum Analyzers, • C/C++, Python, digital signal processing, git, • High-speed interfaces (Multi-Gigabit SERDES, i.e. Aurora/Ethernet/PCIe), • AMD/Xilinx Vivado experience is a plus, • Experience in the Military/Aerospace/Government (MAG) markets a plus, • Excellent computer skills, proficient in Excel, Word, PowerPoint, and Project, • Independent, self-starter with the ability to multi-task, • Possess excellent communication skills and positive attitude Qualifications: • Minimum Bachelor’s in Electrical Engineering, Computer Engineering, Computer Science or related field Master’s Degree a plus, • Proven work experience, • U.S. citizenship required, • Ability to possess a security clearance Why should you join Haigh-Farr? Haigh-Farr is a fast paced, growing company that recognizes employees with a promote-from-within philosophy. We believe in a friendly work environment where employee contributions are well received and a key component to our success. Our facility features state of the art technology and the latest manufacturing and testing capabilities. Please see more details about our benefits below: • Competitive salary, commensurate with experience and capabilities., • Medical Plan with Health Reimbursement Feature, Dental and Vision Insurance., • Flexible Spending Accounts – Health and Dependent Care., • Company Paid Disability Insurance and Group Term Life Insurance., • Paid Vacation, Holidays, and Sick Time., • 401K with Company match., • Company Sponsored Social Events – Golf outings, food truck, BBQ and Pizza luncheons, creative and fun holiday events.

Job DescriptionDescription: Hoyle Tanner's Northeast Ground Transportation Services Group is looking for a Resident Engineer to join our team in our Manchester or Portsmouth, NH office. Work on great projects, with great people, while enjoying great benefits at Hoyle, Tanner & Associates, Inc.! Primary Responsibilities: • Monitor and review spent hours and dollars versus percent complete in relation to project timelines and budget and provide recommendations to the Project Manager to stay on track, • Understand the client's organization and develop professional relationships with client peers, • Develop proficiency in software programs and other tools to support construction inspection and review processes, • Provide suggestions to resolve project timeline issues and budget issues, • Provide peer mentoring for new construction technician staff, • Review and approve progress payments submitted by the Contractor and monitor and advise the Contractor and the Client on potential cost overruns/underruns, • Facilitate difficult project decisions and technical issues with clients and contractors, • Ensure as-built field conditions are well documented and defended, • Lead regular meetings with clients and contractors, • Prepare, review, and approve change orders and value engineering proposals, • BS or MS degree in civil engineering or a related field, and 5+ years of construction inspection experience, • PE Licensure, • Certification in OSHA 10 Construction and Confined Space for Construction, OR HAZWOPER, • Valid driver’s license, • Certification in one or more of the programs offered by NICET, ACI, NETTCP or approved alternate, • Ability to perform tasks that involve moderate to strenuous physical activity

Job DescriptionDEKA R&D has an immediate opening for a Product Complaints Engineer to work in a dynamic Medical Device Research and Development environment. The position reports to the Product Complaints Manager. This is a high visibility role with a significant direct impact in the Quality Management System. How you will make an impact: • Responsible for reviewing complaints related to potential medical device issues., • Perform product complaint evaluations with minimal direction, utilizing experience and product knowledge., • Ensure that complaint documentation follows Good Documentation Practices; meets QMS requirements; and complies with U.S. Food and Drug Administration (FDA) regulations / other regulatory requirements., • Identify and make sound decisions regarding medical device reporting to regulatory agencies., • Interface with Third Party Manufacturers, health care professionals, internal customers, and regulatory agencies., • Participate in audits and CAPA investigations as they relate to complaint handling., • Work with the forensic investigation team to align product investigations related to complaints., • Generate reports to identify areas of process improvement., • Develop product training aids., • Contribute independently while also collaborating with other team members and departments needing product complaint information., • Maintain positive and cooperative communication with co-workers, customers, contractors, and vendors., • Serve as a subject matter expert on complaint handling., • Perform other related duties as assigned under management supervision.Skills needed to be successful:, • 4-year biomedical engineering degree; OR 2-year biomedical engineering degree and 2+ year(s) relevant experience in a cGMP environment supporting complaint handling investigations, medical device reporting, or product analysis., • Knowledge of FDA requirements for Quality Systems, pharmaceutical products, and Medical Device Reporting regulations (21 CFR 803, 820 and 211) is preferred., • Experience with SalesForce is preferred., • Strong motivation to see individual tasks through to completion, and to help as needed to achieve team goals., • Exceptional time management skills with the ability to prioritize multiple projects and ensure compliance with regulations and standard operating procedures., • Good problem-solving and proficient computer skills are required., • Solid written/verbal communication and organizational skills, as well as attention to detail., • Sound technical writing skills. NxdmRixKNf

Job DescriptionDescription: Hoyle Tanner is seeking a Senior Project Bridge Engineer who really enjoys the full evolution of a project. You will be an integral part of the client relationship and have the rewarding experience of mentoring junior staff. This position will have a significant role in planning and developing the project. If you have 10-15 years in the business and pre-stress concrete and steel experience, you are the person we are seeking! We are a welcoming, collaborative, respectful, encouraging, and diverse community where you can achieve your career goals. Our midsize allows you to be visible and heard. Hoyle Tanner offers you a flexible schedule, remote work opportunities and a generous sign-on bonus. See our impressive benefits package for more information. Location: Manchester, NH Manchester’s historic mill yard, our 30,000 square foot office space sits perched on the 5th floor of the original Amory Mill and is the home of our company’s headquarters. Remnants of the historic charm remain in various locations throughout the mill, while our space has been redesigned with modern lines and architectural accents. Job responsibilities: • Manage bridge projects located throughout New England and other locals as needed, • Prepare and perform complex structural analysis, and design calculations, drawings and details for engaging bridge projects., • Lead and assemble a qualified project team to successfully complete complex projects or challenging client deliverables on time and within budget, • Assist with the management of design, review process and permitting through outside agencies, • Assist with business development, client presentations and proposal preparations for exciting and challenging bridge projects., • Coordinate with clients with submittals, meetings and comments as required for successful project delivery, and client satisfaction, • Coordinate with and manage technical staff to meet project deadlines with sub-consultants, • Develop, monitor, and maintain engineering budgets on bridge projects, • Mentor, train and review work performed by junior engineering staff, • Achieve excellent financial performance for Hoyle Tanner, • Provide superior client service by responding to needs and understanding concerns, • Maintain and foster team engagement and satisfaction in completing project tasks and collaborating with subconsultants and other disciplines, • Resolve team personnel conflicts in conjunction with supervisors, • Lead efforts in pursuit of potential projects and the development of technical and price proposals, • Monitor and manage resources to complete projects in accordance with the contract, scope of services, budget, and schedule. Efficiently and effectively use Deltek and other management tools., • Promptly invoice for services rendered and advocate for outstanding accounts receivable, • Monitor product quality and ensure a quality management plan is developed with roles defined accordingly, • Keep Principal-In-Charge informed of potential claims or contract risks as they arise and collaborate on resolution strategies as needed, • Provide coaching, mentoring and feedback to other project managers Requirements: Qualifications • BS, MS degree (preferred), • Professional Engineering License in one or more New England states, • 15+ years of increasing engineering or planning and leadership experience, • At least 5 years of experience as a project manager, • Strong communication skills, an acute understanding of project finances, scheduling, and client management skills