Interface jobs in Orlando, Florida - Page 2Create job alerts

Description The Multi-Domain Solutions Division at Leidos currently has an opening for a Windows Active Directory Domain Engineer to work in our Orlando, Florida office. Primary Responsibilities * The Test team within the Digital Infrastructure Network Integration Lab (DI-NIL) will be responsible for maintaining the DI-NIL architecture and services. There are levels of support needed throughout to include Windows AD layout and configuration to include structure and compliance configurations as well as day-to-day management and review of the architecture. * The DI-NIL support effort will also include working with customers to ensure the needed environment is configured properly and access has been configured to allow a least privilege concept during stakeholder activities within the environment. * Full documentation of builds and configurations utilized within the environment are mandatory as well as process flow documentation to ensure all required tasks are documented and repeatable. High level tasking for this team will include the following: * Build and configure an Active Directory architecture to support access and authentication within the DI-NIL environment * Configure Windows based authentication to work with RedHat Linux and other systems within the environment for utilizing AD for authentication * Manage day-to-day operations of the AD architecture as well as review logs for potential issues * Report and record all issues within the approved ticketing system to allow for ug/defect management and correction * Work with stakeholders to understand access and authentication requirements for test environments being built within the DI-NIL space * Work with other team members to ensure all IA compliance actions are completed on time and are reported correctly * Interface with vendors and facilitate integration into a larger system-of-systems model * Identify test methodology to verify and validate systems efficiently to include regression testing, pass/fail, and deficiency remediation * Facilitate working groups and information exchange in support of program objectives * Support the development and maintenance of system integration plans and system test plans * Build and support a culture grounded in the Leidos values, beliefs and expectations and highest standards of ethical and respectful behavior Basic Qualifications * Must possess a minimum of a Secret clearance with the ability to obtain a TS/SCI clearance * Bachelor’s degree and 8+ years of prior relevant experience or master’s degree with 6+ years of prior relevant experience or demonstratable years of experience as a Subject Matter Expert * Deep technical expertise in Microsoft Windows Server, Active Directory, and Microsoft 365. * Experience with Azure AD Connect (AADC) and Active Directory Federation Services (ADFS). * Proficiency in PowerShell scripting for automation. * Strong understanding of networking concepts (DNS, DHCP). * Proven experience in designing and deploying AD in large-scale or enterprise environments. * Excellent problem-solving, communication, and leadership skills. * Demonstrable experience in design review participation and providing customer centric input * Strong written and verbal communication skills to collaborate with customer representatives, domain experts, and other systems engineers in the development of complex DoD systems. * Demonstrated ability to participate in cross-functional planning, coordination, and task execution situations involving the full spectrum of system integration activities. * Ability to work well with people from many different disciplines with varying degrees of technical experience * Demonstrated experience with Agile program execution and using agile tools (e.g. Jira and Confluence) * Mid-level understanding of government systems security testing (ACAS/Nessus) and remediation – ability to discuss security issues and concerns * Demonstrated ability to brief technical and non-technical customers * Ability to achieve a high degree of customer satisfaction and maintain Leidos positive brand recognition Preferred Qualifications * Prior experience working on ABMS or JADC2 initiatives * Minimum of 4 years of government systems security testing (ACAS/Nessus) and remediation with the ability to discuss security issues and concerns * Prior experience designing and deploying networks * Prior experience with SAFe Agile implementation * Prior experience support Department of the Air Force programs * Previous experience working on complex multi-domain systems * Experience with design and validation of Cloud and Edge Computing and Network * Experience with design and validation of Cloud and Edge Computing and Network * Demonstrable knowledge in test automation and test result analysis * Demonstrable experience in network topologies to validate functionality, performance, stability and scalability of features and products. * Proven expertise in creating test methodologies and writing test specifications * Experience in Integration, test, verification, and validation If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. September 24, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $89,700.00 - $162,150.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Credit & Collection Specialist.Schedule Monday to Friday- core business hours.The Collection and Credit Specialist maintains the interface between the customers, AR Accounting, Operation and Sales team.This position is responsible for timely collections of all account receivable balances, credit man

While the Director of Sales reports directly to the General Manager, the Regional Sales and Marketing Manager will interface and assist in the direction of the Sales and Marketing function at the property. Develop a realistic annual marketing plan, forecast with monthly reviews to update and modify

Amtec Staffing has partnered with a well-established drywall specialty contractor in Orlando, FL to find an experienced Chief Estimator to lead their Estimating team. This is a fantastic opportunity to join a growing company known for delivering high-quality drywall, metal framing, and acoustical ceiling solutions across a range of commercial sectors. Project Types: Commercial Interiors • Theme Parks • Hospitality • Stadiums • Airports Responsibilities: As the Chief Estimator, you will lead and oversee the full estimating process, from conceptual budgeting to final bid submittal, while guiding a team of junior and senior estimators. Core responsibilities include: • Leadership & Team Management – Oversee the estimating department; train, mentor, and provide guidance to a team of estimators., • Preconstruction – Provide conceptual and detailed takeoffs, budgets, and value engineering input during preconstruction phases., • Bid Preparation – Prepare comprehensive bids, define scopes of work, solicit and qualify subcontractor pricing, and ensure timely bid submissions., • Process Development – Implement and refine internal estimating systems and procedures to ensure consistency and efficiency across all estimates., • Project Handoff – Collaborate with project managers during handoff to ensure smooth transition from estimating to construction., • Client Interface – Participate in presentations and negotiations with general contractors and developers. Work Characteristics: The ideal candidate is highly organized, collaborative, and solutions-oriented with a passion for accuracy and process improvement. Must possess strong communication skills and the ability to thrive in a fast-paced environment while maintaining attention to detail. Skills/Experience: • Experience – Minimum of 10+ years of experience in construction estimating, with at least 5 years in a leadership or management role specific to drywall or specialty subcontracting., • Industry Knowledge – Strong knowledge of drywall assemblies, framing systems, acoustical ceilings, insulation, and other related scopes., • Software Proficiency – Advanced skills in Microsoft Excel and Word; experience with On-Screen Takeoff (OST), QuickBid, Bluebeam, and construction bid platforms (i.e., Autodesk, Procore) preferred., • Leadership Skills – Proven ability to lead, mentor, and manage an estimating team with a focus on collaboration and accountability., • Organizational Skills – Ability to manage multiple deadlines, prioritize tasks, and implement standardized estimating procedures. If you or someone you know would be a great fit for this role, we’d love to hear from you!

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering an internship. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Internship Program Overview We maintain a robust and diverse internship program that offers relevant job experience in a challenging environment, working alongside our top professionals. Our teams are committed to providing unique and comprehensive opportunities. C&S is focused on innovation of our communities—so we invest in that future by adding diverse minds to our table. What You Will Learn • Practical application of your field of study, • Hands-on interaction with the day-to-day business requirements of our industry Our interns are dynamic individuals who are ready to join a highly supportive and passionate team. From our engineering disciplines to professional support, we are looking for energized students to bring creativity and innovation to our teams. Not only are they a part of the company, but they interface with our community and clients to provide the best solutions. Estimated Compensation Range and Benefits $16.00 - $29.00/hr* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Job Description Jersey Mike's Subs has been making amazing subs since 1956 in Point Pleasant New Jersey! The Jersey Mikes tradition was founded on a strong sense of community and commitment to the personal and professional development of our people. Our goal is to serve the highest quality sub sandwich to our customer in a manner that projects a thankful and caring mentality to every person that comes through our door. Our culture is a culture of "giving" and supporting our local communities so that all can be lifted together. "Jersey Mike's "A Sub Above" Jersey Mike's Subs is looking for Crew Members. Become part of Jersey Mike's vibrant organization! Grab hold of our powerful positive energy with a Jersey Mikes ready-to-take-off career that is fun, fulfilling and rewarding! If you like to have fun, banter with people and enjoy sharing your life then working at Jersey Mike’s may be for you. Besides learning our business and pleasing people with our great authentic sub sandwiches, you'll learn a whole new level of social decorum to take through life. So become part of our tradition! Jersey Mike's was built on a strong sense of community and an outstanding commitment to the personal growth of our people. If you enjoy being part of something special in a strong cultural and spirited environment then bring your energy and come grow with us! The primary requirement of a Jersey Mike’s employee is commitment to company goals: • Create food consistent with Jersey Mike’s high quality standards, • Maintain restaurant that is noticeably cleaner than others, • Work in a fast paced team driven atmosphere, • Ability to multitask and work with a sense of urgency, • Interface with customers and provide an exceptional experience, • Full understanding of the terms accountability and information Qualifications for the job: • Education: High school degree or equivalent, • 1 Year QSR experience preferred, • Other: Must be 18 years or older to operate the slicer, • Serve Safe Certification - Food Handler, • Must have reliable transportation Key Competencies: • Excellent Menu and product knowledge awesome personality, • Must be able to thrive in a fast pace environment, • Desire to improve self and skill sets, • Able to communicate effectively with guests. Awesome personality, • Participate in all Jersey Mike's training programs, • Ability to meet schedule requirements and is a reliable performer This website is not operated by Jersey Mike’s Franchise Systems. Jersey Mike’s restaurants are independently owned and operated franchise locations. Franchisees are independent business owners who set their own wage and benefit programs, which can vary between franchisees. Your application will go directly to the franchisee, and all hiring decisions will be made by the franchisee. We use eVerify to confirm U.S. Employment eligibility.

Job Description: Optomi in partnership with a leading global enterprise is seeking a Senior Project Manager to join a high-impact team driving a global Multi-Factor Authentication (MFA) deployment across thousands of applications worldwide. This role requires an experienced, detail-oriented leader who thrives in fast-paced enterprise environments and can confidently interface with executive stakeholders. Must Haves: • 10–15+ years of experience managing enterprise-scale programs or projects, • Proven experience deploying enterprise-wide Multi-Factor Authentication (MFA) solutions, • Deep understanding of Identity & Access Management (IAM) tools such as Okta, Ping, ACME, Keystone, Active Directory, etc., • Excellent project management and organizational skills, • Agile, Scrum, and PMP background (certification preferred, not required), • Ability to translate executive-level communication into actionable deliverables, • Strong documentation and reporting skills (PowerPoint, risk logs, issue tracking, etc.), • Exceptional storytelling and executive presentation abilities, • Experience managing enterprise-scale rollouts with multiple global stakeholders, • Flexibility to work across U.S. time zones Nice to Have: • Previous experience at large global enterprises (media/entertainment experience is a plus), • PMP certification, • Background in enterprise-level security or IAM projects, • Experience collaborating across cross-functional, international teams Day-to-Day Responsibilities: • Lead a global MFA rollout across ~1,000 applications, • Track and manage progress, compliance, and conversion status for all apps, • Coordinate with application owners and technical teams for MFA enablement, • Drive schedules, risk mitigation, and escalation management, • Prepare and deliver executive-level status reports and presentations, • Develop PowerPoints and talking points for SVP-level briefings, • Foster accountability and adoption across multiple business units and time zones

This position reports to a higher level Technical Support Supervisor and may interface with range schedulers; project coordinators; members of management. TECHNICAL SUPPORT SUPERVISOR I - (R-Y-25). TECHNICAL SUPPORT SUPERVISOR I.

Replenishment technology and Crunchtime including associated interface/data structures.

As the VP, Finance you will serve as a key leader within the management team and as the financial interface between Finance and the Senior Leadership Team ensuring alignment of corporate goals and long-term financial performance. Passionate about leveraging technology and experienced in implementing

A Snapshot of Your Day As a Project Lead Engineer (PLE), you would start a typical day with organization of tasks to support multiple concurrent projects. You will review contracts, evaluate on time delivery of engineering documents, review scope and identify gaps, organize meetings for clarification of technical issues, mentor other Engineers, and provide reporting to your manager and other leaders within the business! How You’ll Make an Impact • Leading a team of experts for mechanical, fluid, electrical and control systems towards the project management., • Acting as primary point of contact for the project management for technical auxiliaries’ scope on a project. You will collaborate with both local and global Siemens Energy Engineering, Project Management, Procurement, Quality, Manufacturing, and Installation teams in support of project execution activities. You will facilitate information flow between Engineering, Program Management, and our customers as the need arises and agreed., • Representing auxiliaries engineering in customer communication., • Leading the contract technical scope and document schedule for auxiliaries from project kickoff through handover to our customer. You will coordinate appropriate flow-down of contract requirements to the Engineering teams at kickoff., • Highlighting risks of execution to Program Management and Engineering. You will manage internal engineering change requests and support external technical scope changes to support Project Management during project execution., • Background in mechanical and/or electrical engineering or a comparable field, with a minimum of a bachelor’s degree, preferably an advanced degree or equivalent experience in Engineering., • 8+ years of professional experience in the power plant project execution with knowledge of Gas Turbine, Steam Turbine and/or Generator auxiliaries., • Proven capability in both written and verbal communication. Proficient in English. Demonstrated experience in prioritizing work and completing tasks. Ability to work in multi-functional teams and lead through influence., • Proficient in using MS Office Suite (Word, Excel, Outlook) and Siemens Energy tools such as Fabasoft, SAP, Teamcenter, and COMOS/ePlan. Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities; supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

Snapshot of your Day The Combined Cycle Design group for America region is looking for a qualified mechanical or chemical engineer to support Thermal Cycle Design and Performance Testing on various power generation projects. The primary function of this position is to support Thermal Cycle Design of power plant projects which includes development of Heat Balance Diagrams, Thermal Performance Guarantees, and Performance Risk Assessments. Design Responsibilities include a wide range of plant configurations including Combined Cycle, Conventional Steam Cycles, solar, gasification plants as well as work on advanced cycle concepts. Additionally, potential candidates may be asked to develop Performance Testing Procedures based on ASME codes and standards and conduct field performance testing. How you’ll make an Impact Specific job responsibilities include the following: • Develop Heat Balance Diagram Specifications and Performance Guarantees for Thermodynamic Systems, • Develop Performance Testing Procedures per ASME Performance Test Codes, • Conduct Field Performance Testing Activities based on applicable testing procedures including supporting of appropriate cycle isolations, measurements and calculations, and meeting appropriate test uncertainty requirements, • Support contract review for environmental and performance testing, • Support Combined Cycle Performance Studies on new frame developments as well as various service projects, • Support Plant Emissions and Acoustical Calculations, • Develop, review, and implement permitting plans for power generation facilities, • Resolve field installation and commissioning problems associated with equipment and systems within assigned responsibilities, • Communicate in both written and verbal form and interface with a wide range of organizations both internally and externally regarding power plant system and equipment design requirements., • Develop, track and meet project or proposal schedule commitments and budgets What you Bring • BS degree in Mechanical Engineering or Chemical Engineering, • Up to 5 years of experience in various power plant components., • Strong communications skills, able to clearly and concisely express technical information of power plant system and equipment design requirements (or data) to non-technical associates, peers and management, • Strong Technical writing skills, • Presentation and meeting facilitation skills, • Proficiency in Microsoft Word, PowerPoint, and Excel, • Qualified Applicants must be legally authorized for employment in the United States. Qualified Applicants will not require employer sponsored work authorization now or in the future for employment in the United States., • A working knowledge of thermodynamics and fundamental power plant theory is requirement for this position., • The individual must have a desire to learn and become proficient with several computer aided thermal modeling codes, statistics, risk management, and process design tools., • Excellent communication and problem-solving skills are essential, as this position requires working in close conjunction with all design engineering functions of the Division as well as sales, marketing, outside architectural engineers, and project management. Preferred Knowledge/Skills, Education, and Experience • 5 years of thermodynamic experience in development of thermal performance models and performance testing, • A working knowledge of thermodynamic software such as Krawal or similar, • Knowledge of ASME Performance Testing Codes About the Team Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits, • Parental leave

Job Description We are seeking a Construction Project Superintendent to join our team! You will oversee project planning, scheduling, budgeting, and implementation. Are you able to provide “Full Value Construction” meet or exceed project budget and schedule, provide fantastic customer satisfaction, and keep the fast-track renovation and ground up work pace? Responsibilities: • Oversee all aspects of construction project from planning to implementation, • Allocate resources for assigned projects, • Supervise onsite personnel and subcontractors, • Interface with project inspectors, contractors, architects, engineers, city and county officials, and clients, • Negotiate with contractors to receive reasonable order costs, • Previous experience in construction management or other related fields, • Familiarity with construction management software, • Strong leadership qualities, • Strong negotiation skills Compensation will be dependent on your qualifications.

Job Description We Don’t Cheat at Solitaire! If you’re looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch. The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries preferred. This branch is due to move to a new location in Apopka in early 2026. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter’s policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: • Yard organization and cleanliness, • Mobile office material inventory management, • Organize, maintain, load & unload furniture (Satellite Specialty Products), • Remove and replace lighting, plumbing and electrical, • Perform moderate carpentry work/repair., • Interface with customers at job sites, • Must be a Self-Starter; has the ability to work independently & take initiative, • Problem-solver, • Forklift experience, • Utility trailer experience, • Entry level to intermediate level construction experience required, • Moderate carpentry and electrical experience., • Organized, • Wears personal protective equipment as required, • Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc., • Ability to lift a minimum of 50 pounds., • Good fine motor skills, coordination, range of motion and grip strength, • Ability to work in all climate conditions., • Ability to be exposed to loud noise levels., • Ability to operate hand and power tools, • Ability to work in an environment containing dirt, grease, and dust., • Ability to work safely around heavy machinery and heavy equipment. Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee.

Job Description Type: We are looking for a senior-level engineer to lead the design and deployment of high-performance electronic systems that combine precision signal paths, embedded compute platforms, and robust communication interfaces. This role owns the full hardware lifecycle, from architecture and schematic development to validation and production launch. You will define system-level decisions across power, RF/digital routing, and interface integration; design and review multi-layer PCB layouts; and build and test prototypes using standard lab equipment to ensure signal integrity and resilience. Success requires tight coordination with firmware and systems teams to align hardware behavior under real-world load conditions, along with disciplined documentation to support production transfer. The role also includes occasional hands-on support during field evaluations or customer integration events. Ideal for someone who enjoys solving complex hardware challenges and wants to see designs move quickly from bench to deployment. Experience Requirements: • A minimum of 10 years of experience working with complex electronic systems, particularly involving high-frequency or mixed-signal architectures, • Must be a U.S. citizen with the ability to obtain and maintain government security clearance, • Proficiency with circuit simulation and modeling platforms (e.g., Keysight ADS, Microwave Office, HFSS, CST or similar), • Extensive experience in multi-layer PCB design using Altium Designer, Cadence Allegro, or equivalent tools, • Hands-on proficiency with electronic test and measurement equipment (oscilloscopes, spectrum/network analyzers, signal generators, etc.), • Strong understanding of signal behavior including impedance control, filtering, modulation, and noise mitigation, • Proven track record taking electronic products from prototype to full production, • Experience implementing wired (UART, I2C, SPI, CAN, Ethernet) and wireless interfaces (BLE, Wi-Fi, ZigBee, cellular), • Working knowledge of embedded platforms and driver development (e.g., PSoC, nRF, Raspberry Pi CM, x86_64), • Familiarity with Linux-based or embedded Linux environments, particularly Debian-family systems, • Experience with GNSS, LTE, Bluetooth, radar, or other custom RF systems, • Familiarity with FPGA interfaces, digital baseband processing, or mixed digital/RF designs, • Knowledge of regulatory compliance standards (FCC, CE, ETSI) and EMC best practices, • Prior involvement in initial board bring-up or first-article validation, • Strong analytical and documentation skills with attention to reproducibility, • Experience working in small, multidisciplinary hardware teams with fast iteration cycles, • Exposure to simulation or training systems (military or industrial) is a plus Drug screening, background and reference checks are performed if required. Valid identification and reliable transportation required. We are an E-Verify employer. We will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Our employees are authorized to work in the United States.

Job Description Do you have a passion for the Air Traffic community and developing others? Are you a retired ATC from the FAA? Then, this role is FOR YOU! We are currently looking for an experienced Air Traffic Controller to join our Controller Training Solutions (CTS) team as an Instructor II, partnering with SAIC at Central Florida TRACON F11 (Orlando, FL) to support air traffic controller training services for the Federal Aviation Administration (FAA). The CTS Instructor is a Part-Time 32-hour,hands-on position that requires the candidate to deliver the highest quality classroom effectively and consistently and/or simulation laboratory training to a wide variety of students including developmental air traffic controllers and Certified Professional Controllers (CPC). The Federal Aviation Administration (FAA) is responsible for ensuring that air traffic control specialists provide the flying public with a high level of safety and professionalism. A well-trained Air Traffic Control (ATC) workforce plays an essential role in fulfilling this responsibility. The FAA employs more than 14,000 air traffic controllers. They work in air traffic facilities of varying sizes, safely separating more than 50,000 aircraft in the National Airspace System (NAS) each day. To provide such air traffic services, the FAA trains new air traffic control specialists and provides recurrent training to current air traffic control specialists. The FAA utilizes Contractor-provided instructional services at FAA ATC facilities throughout the U.S. and its Territories to ensure these training needs are met. The scope of the contractor-provided services includes all training and training program support to successfully train and prepare students to become fully certified air traffic controllers. SAIC must provide training and training-related support services as required for all types and levels of ATC facilities. Required Qualifications: US Citizenship is required with the ability to obtain and maintain a Public Trust clearance. The CTS Instructor candidate must have a minimum of five (5) years of FAA CPC experience controlling live traffic, or recent experience as a contract Instructor at an FAA facility. Experience must have been at the same type and same [or greater] level of ATC facility as F11. The successful candidate for this position must demonstrate strong technical skills with current ATC automation, simulation systems and procedures. This position will provide mentoring for ATC students and Remote Pilot Operators (RPO) as well as participate in curriculum design and development. The selected candidate must demonstrate the knowledge and skills applicable for obtaining radar and/or non-radar simulation laboratory certifications at FAA air traffic control facilities within the U.S. National Airspace System. Education: • High school diploma or equivalent (GED) required, • Direct experience as a Certified Professional Controller (CPC) at the (F11) is preferred but not required., • Operational Experience with ATC simulators including scenario design for simulation platforms (e.g. TSS, AT Coach, SGET, etc.)., • Demonstrated ability to interface effectively with FAA personnel at all levels to ensure the delivery of training services meet the needs of the local facility, as well as the FAA’s overall Air Traffic Control mission is highly desired. Contract, Part Time 32/Hours

Job DescriptionSyms Strategic Group (SSG) is seeking a talented Senior Software Systems Engineer (.Net Developer) Location: Remote Department: Veterans Affairs (VA) Type: Full Time Min. Experience: Experienced Security Clearance Level: Public Trust (MBI) Military Veterans are highly encouraged to apply! Essential Duties and Responsibilities • Perform technical planning, high-level and detailed requirements definition, test planning and execution (including use cases, test procedures, and test data), software systems integration, and technical support for software systems and subsystems, • Perform software system product services, including concept design, test, installation, operation, maintenance, and disposal, • Serve as an active member of the software development team participating in daily stand-ups, • Utilize full-stack development expertise that ranges from development of .Net back-end application using C#, unit testing, testing with Nunit or other tools, and deployment using Continuous Integration/Continuous Deployment (CI/CD) pipelines, • Ensure the performance, quality, and responsiveness of application, • Provide development support (as needed) for solutions deployed to production, • Implement long-term solutions and building blocks within the Agile framework for improved reusability, • Interface with the stakeholders for project requirements, • Apply and promote good software engineering practices such as test automation, modularization, and simplification, • Collaborate and coordinate with colleagues on various solutions and problems, • Document software designs, which may include design diagrams, data flow diagrams, software module descriptions, etc., • Use Integrated Development Environment (IDE) tools to include Visual Studio, Azure DevOps, and Git Required Skills and Experience, • Expertise in .Net framework and .Net Core, with a strong understanding of C#, • Proficiency in developing back-end applications using Model-View-Controller (MVC) architecture and .Net core, • Strong Knowledge of Object-Oriented Programming (OOP) and design patterns, • Experience with Representational State Transfer Application Programming Interface (RESTful APIs) and other APIs, • Proficiency in database design and development, including working with Structured Query Language (SQL) Server and Entity Framework, • A familiarity with cloud platforms (e.g. Microsoft Azure and Amazon Web Services (AWS)) and services, • Experience with version control systems (e.g. GIT and Team Foundation Server/Team Foundation Version Control (TFS/TFVC)), • An understanding of CI/CD practices and tools (e.g. AWS CodePipeline, CodeBuild, and CodeDeploy), • Knowledge of unit testing frameworks and tools (e.g. NUnit, xUnit, and MSTest), • A proficiency in using development tools like Visual Studio and Visual Studio Code, • Excellent problem-solving and analytical skills, • Strong communication and interpersonal abilities, • An ability to work independently and as part of a team, • Attention to detail and commitment to producing high-quality software, • An ability to mentor and provide technical guidance to junior developers, • An ability to prioritize tasks and manage time effectively, • Experience with Agile development methodologies (e.g., Scrum and Kanban), • A familiarity with DevOps practices and infrastructure as code (IaC), • A strong understanding of security best practices for web applications and APIs, • An ability to conduct code reviews and provide constructive feedback, • Experience with performance tuning and optimization of applications, • SSG will not make assumptions regarding your qualifications. Your answers to the mandatory screening questions must be supported by the information on your resume. Applications with inconsistencies will not be considered., • Recruiters or Third parties will not be considered., • This is a 100% U.S. based remote position. However, candidates from CA, CO, IL, NJ, or NY will not be considered. Syms Strategic Group, LLC is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, marital status, disability, veteran status, sexual orientation, or genetic information. Powered by JazzHR sUzQz2Yj5u

Lockheed Martin is seeking a Lead Systems Engineer for our Missile/Sensor development programs. This position reports to the Program's Chief Engineer and will provide day-to-day interface with Program Manager, program engineering leads, suppliers and the Customer. Experience required includes DoD ta

Job Description Professional Surveyor and Mapper - Orlando KEITH is looking for a Professional Surveyor and Mapper to join our Survey and Mapping team in our Orlando, Florida office. We are looking for positive individuals to fit our energetic culture. We are a well-established multidisciplinary company that offers land surveying, subsurface utility engineering, civil engineering, planning, landscape architecture, and construction management services. The firm was founded on the principle of achieving success by combining the latest technology with client oriented business practices, and a strong group of talented professionals. What you will do: As a Professional Surveyor and Mapper, you will oversee the day-to-day operations of field and office staff for multiple projects, and clients from proposal, through production, until final deliverables. This is a hands-on, project responsible position, and will focus on our public and private client base. You will also be responsible for proposal writing, business development, and staff development. This role is the key point of contact between KEITH and our clients. • Manage projects from start to finish, while ensuring services meet KEITH’s quality standards and client specifications, • Participate in planning and implement procedures and systems to maximize operating efficiency, • Develop and manage proposals, budgets, schedules, billings, and contracts, • Sign and seal plats, field notes and control drawings if required, • Establish work plans and staffing requirements for multiple projects, • Participate in business development opportunities and maintain strong client relationship, • Develop and conduct presentations to clients and other critical stakeholders, • Effectively interface with sub-consultants and as well as other business relationships, • Provide support to other operational units as needed, • 5+ years of industry related work experience in a professional or management capacity, • Bachelor’s degree in related discipline/and or equivalent experience, • Demonstrated experience in project/phase management, • Strong proficiency with or understanding of tools such as AutoCAD, MicroStation, ORD Open Roads, MS Office Suite, • Excellent written and verbal communication skills including the ability to clearly define assignments/deliverables to team members, • Ability to oversee, mentor and motivate a team, • 100% PAID Medical, Dental, and Vision, • Employer matched 401K - 100% Vested on Day 1 of contribution!!!, • Paid Parental leave and Life Insurance, • PTO, Holidays, and more! ... Powered by JazzHR m2rmfOslts

Job Description We are seeking a dynamic and experienced General Contractor Healthcare Construction Superintendent to join our team and play a crucial role in ensuring the successful execution of construction projects from inception to completion. We are seeking a candidate with previous ground up Hospital or free-standing Emergency Room experience that is familiar with local government entities and their requirements. Estimated Start Date: ASAP About Us In 1999, armed with an Electrical Engineering degree, 14 years of business experience with Hoechst Celanse and a restless entrepreneurial spirit, Francisco Alvarado decided to embark on a new venture and Marand Builders, Inc was established. Since the conception of Marand, our goal has been to understand the individual needs of our customers and provide them with a customized solution. We have built our reputation on reliability, attentiveness, and quality of execution. We succeed when we have provided our clients with the best construction experience. We started in Charlotte, NC, but rapidly expanded to cover the Carolinas, Mid-Atlantic and Southeast US regions. We have 7 regional offices in Virginia, North Carolina, Georgia, and Florida. Our team of highly talented professionals has allowed us to become a preferred vendor with many of our clients, exceeding 95% repeat business. Marand specializes in serving the healthcare, financial services, commercial / administrative and light-industrial industries. Our ideal candidate will have: • A bachelor’s degree in construction management, engineering, or a related field, or equivalent work experience, • At least ten years of experience in the Healthcare construction industry, overseeing all aspects of ground-up projects in hospitals, medical clinics, facilities, and lab upfits, • Strong leadership, communication, and interpersonal skills, with the ability to manage multiple teams, subcontractors, and stakeholders, • A Construction OSHA 30 within the last 5 years or ability to renew, • ICRA certification and familiarity with local government entities, • Proficient in project reporting software, MS Office, and blueprint reading, • Knowledge of building codes, safety regulations, air flow standards, and quality standards, • Problem-solving and decision-making abilities, with a proactive and results-oriented approach, • A valid driver’s license and the ability to travel to various job sitesRequirements, • Leadership: individual needs to have the ability to supervise and lead the team., • Organization: individual should be able to schedule and supervise multi-tasking work of a multi-member team., • Experience: individual should have required and proven knowledge in commercial building and construction and related sectors., • Scope of Work: individual should have experience with running all aspects of large commercial projects from inception to full profitable completion, to including the following: large ground up projects, interior renovation projects of all sizes, finish work, and all relocation and replacement work on project sizes in the $2M+ valuation range., • Safety: A Superintendent Level 3 is required, at a minimum, to possess a valid OSHA 30 card at all times while working on Marand projects., • Problem-Solving: individual should have and demonstrate good problem-solving skills., • Communication: individual should possess and demonstrate excellent communication skills not only with team members, but also with the Project Management and the Customer., • Computer Skills: individual needs to be computer literate and should have basic computer knowledge and experience in the use of Microsoft Office and Procore software., • OSHA-30 Hour Training Required as well as recertification every 5 years per Marand policy, • The successful Construction Project Superintendent should have the minimum of a High School Diploma. A Bachelor’s Degree from a 4-year College or University or an Associate’s Degree from a Vocational School is a plus., • A minimum of five to ten years’ experience “on the job” is required., • Enforcing safety compliance (OSHA and Marand safety plan and policies) and advocating for safety is the number one priority., • Supervise the construction effort in the field to ensure that the project is completed in accordance with design, budget, schedule, and customer objectives., • Conduct weekly on-site meetings with subcontractors, vendors, and others as appropriate with respect to schedule safety issues, and other matters relating to performance in the field., • Enforce compliance with all project procedures, safety program requirements, and work rules., • Supervises and ensures the health and safety of the workers by enforcing all company, state, and federal guidelines., • Prepare and distribute field reports in a timely manner (i.e., daily superintendent’s reports, safety reports, etc.)., • Completion of punch list items in a time frame consistent with the customer’s requirements and the project budget. Procore for punch list management, • Monitor and direct subcontractor’s progress and ensure manpower is adequate to meet project schedule and customer expectations., • Prepare as necessary subcontractor work schedules and provide input to the Project Manager in preparing and updating project construction schedules to jointly ensure timely completion., • Verification of all layouts and/or checking of layout by subcontractors and the establishment of initial control lines and grades., • Respond with clarity to subcontractors with respect to questions regarding the project documents and their work. Provide documentation and coordinate with Construction Manager as appropriate., • Participate in pre-construction planning, including logistics, means and methods, bid and scope reviews, and project estimates., • Maintain an up-to-date set of contract documents on site., • Ensure that the subcontractors are maintaining record drawings (“red line as builts”) during construction., • Responsible for the organization, establishment, and maintenance of the on-site field office to project a professional image (organized, clean, signage, etc.), • The timely communication with the Construction Manager on matters regarding financial issues, safety, construction progress, labor issues, material problems, quality, code issues, etc., • Interface and work harmoniously with respective Project Managers and other personnel., • Manage, oversee, provide training, and act as a mentor to other Superintendent levels., • Work in harmony with other Superintendents that may be assigned as part of a team on larger projects., • Continue education in areas including OSHA and safety, means and methods, codes, management skills, new technology, etc., • Maintain current Red Cross First Aid and CPR certification., • Maintain a current working knowledge of the permit process in those communities where performing work and communicate information on changes to the office., • Ensures overall cleanliness of the jobsite to Marand’s standards.Physical Demands:, • This position involves work at a construction site where duties will be performed both indoors and outdoors, • Working hours may be extended to meet project deadlines, • Ability to work night shifts, • Dexterity of hands and fingers to operate a company iPad, phone, and other business machines, • While performing the duties of this job, the employee is regularly required to sit, stand and walk. Generally, the job requires 20% sitting, 40% walking, and 40% standing., • Includes crawling, standing, stooping, bending, crouching, kneeling, sitting, reaching. Physical work is a primary part (more than 70%) of the job, • Talk or hear, • The employee must occasionally lift and/or move up to 50 pounds Powered by JazzHR VbJb2k2MSr

Job Description We are seeking a Construction Superintendent to join our growing team of construction professionals. The ideal Batia Construction Company (BCC) candidate will support BCC core values of Professionalism, Responsiveness and Christ-like Integrity. Responsibilities: • Oversee all aspects of construction project from planning to implementation, • Maintain effective communication between owners, project mangers, and project personnel., • Allocate resources for assigned projects, • Supervise onsite personnel and subcontractors, • Interface with project inspectors, contractors, architects, engineers, city and county officials, and clients, • Negotiate with contractors to receive reasonable order costs, • Previous experience in construction management or other related fields, • Familiarity with construction management software such as Red Team, ProCore etc., • Strong leadership qualities, • Strong negotiation skills, • Deadline and detail-oriented, • 401(k), • 401(k) matching, • Health insurance reimbursement., • Paid time off, • Tuition reimbursementCompany DescriptionBatia Construction Co. is a full-service firm that specializes in creating real estate assets through construction based services. With a team of experienced professionals that are focused on delivering quality service and value to our clients, we strive to provide everyone we partner with with the opportunity to achieve success through our guiding principles of professionalism, responsiveness, and integrity.Batia Construction Co. is a full-service firm that specializes in creating real estate assets through construction based services. With a team of experienced professionals that are focused on delivering quality service and value to our clients, we strive to provide everyone we partner with with the opportunity to achieve success through our guiding principles of professionalism, responsiveness, and integrity.

Job Description We are seeking a Commercial Construction Project Manager to join our team immediately! You will oversee project planning, scheduling, budgeting, and implementation. Are you able to provide “Full Value Construction” meet or exceed project budget and schedule, provide fantastic customer satisfaction, and keep the fast-track work pace? Responsibilities: • Oversee all aspects of construction project from planning to implementation, • Allocate resources for assigned projects, • Work with Field Supervisors and subcontractors, • Interface with project inspectors, contractors, architects, engineers, city and county officials, and clients, • Negotiate with contractors to receive reasonable order costs, • Previous experience in commercial construction management or other related fields, • Familiarity with construction management and scheduling software, • Strong leadership qualities, • Strong negotiation skills Compensation will be determined and based on your knowledge, training, and experience. This will be discussed during the interview. Please reply with any questions.

Job Description Professional Surveyor and Mapper - with FDOT Project Experience (Remote or Hybrid) KEITH is looking for a Professional Surveyor and Mapper with experience working on FDOT Projects to join our Survey and Mapping team. This position can be remote, hybrid, or in office. We are looking for positive individuals to fit our energetic culture. We are a well-established multidisciplinary company that offers land surveying, subsurface utility engineering, civil engineering, planning, landscape architecture, and construction management services. The firm was founded on the principle of achieving success by combining the latest technology with client oriented business practices, and a strong group of talented professionals. What you will do: As a Professional Surveyor and Mapper, you will oversee the day-to-day operations of field and office staff for multiple projects, and clients from proposal, through production, until final deliverables. This is a hands-on, project responsible position, and will focus on our public and private client base. You will also be responsible for proposal writing, business development, and staff development. This role is the key point of contact between KEITH and our clients. • Manage projects from start to finish, while ensuring services meet KEITH’s quality standards and client specifications, • Participate in planning and implement procedures and systems to maximize operating efficiency, • Develop and manage proposals, budgets, schedules, billings, and contracts, • Sign and seal plats, field notes and control drawings if required, • Establish work plans and staffing requirements for multiple projects, • Participate in business development opportunities and maintain strong client relationship, • Develop and conduct presentations to clients and other critical stakeholders, • Effectively interface with sub-consultants and as well as other business relationships, • Provide support to other operational units as needed, • Experience working on FDOT Survey and Mapping projects in District 5, • Bachelor’s degree in related discipline/and or equivalent experience, • Demonstrated experience in project/phase management, • Strong proficiency with or understanding of tools such as AutoCAD, MicroStation, ORD Open Roads, MS Office Suite, • Excellent written and verbal communication skills including the ability to clearly define assignments/deliverables to team members, • Ability to oversee, mentor and motivate a team, • 100% PAID Medical, Dental, and Vision, • Employer matched 401K - 100% Vested on Day 1 of contribution!!!, • Paid Parental leave and Life Insurance, • PTO, Holidays, and more! ... Powered by JazzHR YeEYwGMLVD

Job Description Chowbus is a fast growing, well-funded food startup headquartered in Chicago on a mission to help diners to discover new and exquisite dishes, and to give traditional mom and pop restaurants a fighting chance to succeed without compromising who they truly are. By building a super app, our goal is to be the one stop shop for everything related to food. The Technical Support Associate is responsible for restaurant technology installations and post-sales support. This role will interface with both restaurants and customers to optimize Chowbus' service in the local markets where we operate. This operations-driven role will manage partnerships and collaborate cross-functionally across the business. What You'll Focus On • Install, configure, and train restaurant staff on Chowbus products including hardware and networking devices – terminals, kiosks, handhelds, printers, and other peripheral equipment., • Work with menu team to set up and configure the restaurant's menu correctly prior to installation and help with menu requests as needed after installation. Using appropriate judgment, independently determine priority of restaurants, order of steps to take during implementation based on restaurant needs, and menu design options., • Efficiently and accurately respond to and resolve incoming calls, chats, tickets, and cases., • Collect, organize, and solve feedback from restaurant partners and customers., • Communicate with restaurants to understand their needs and optimize business performance by finding opportunities to implement impactful solutions for our restaurant partners., • Collaborate with central operations, product, and engineering teams to drive adoption of new products, processes, and plans locally., • Bilingual proficiency in English and Mandarin required, • 1+ years of relevant experience highly preferred, • Prior startup experience preferred, • Bachelor's degree in a related field preferred, • A fair compensation package, • Medical, dental, and vision insurance, • 401(k), • 100% employer-paid Short-Term Disability (STD), • 100% employer-paid Life Insurance and option for additional employee-paid Life Insurance, • 100% employer-paid Accidental Death and Dismemberment (AD&D) Insurance and option for additional employee-paid AD&D Insurance, • Company holidays, • Birthday off, • Paid Parental Leave, • Flexible Paid Time Off (PTO), • Employee Assistance Program (EAP), • Fuel reimbursement, • Salary 50K～60K

Job Description The Operations Manager shall provide leadership and managerial direction for all projects to ensure projects are being managed and constructed in a safe and efficient manner. MAJOR DUTIES AND RESPONSIBILITIES • Communicate with Superintendent on a daily basis to review project requirements for personnel and equipment., • Provide support, direction and guidelines for project operational issues to Superintendents and Foremen., • Coordinate and schedule use of all construction equipment including outside rental equipment. 4. Meet regularly with President to review project progress, schedules, budgets, costs, and specific issues., 5. Maintain liaison with General Contractor and vendors and, if needed, assist in the resolution of all issues and problems., 6. Assist in the development and resolution of construction claims for all projects. • Assist Superintendents on short-term schedules as required., • Develop two-week schedules for all projects/crews to plan labor and equipment forces., • Visit all construction sites “as needed” on a routine basis for: · Production evaluations · Discuss with Superintendent any projected schedule/equipment and labor problems · Project housekeeping · Project Safety · Maintenance and care of equipment · Means and methods of construction · Quality of work · Accurate reporting of daily, weekly and monthly quantities • Arrange for outside rental equipment as required., • Attend construction meetings with GC on a routine basis., • Attend weekly toolbox meetings on a routine basis., • Interface with salaried and hourly workers to communicate company issues, compliment exemplary work or effort and to address grievances as necessary., • Attend preconstruction meetings., • Annually review hourly construction workers for performance and rate adjustments., • Assist with the implementation of Safety programs., • Attend and promote daily huddles whenever possible., • Review Superintendent and Foreman recordkeeping for conformance to company policies., • Interview and hire hourly employees as required by current backlog. Qualifications: • Bachelors Degree in Civil Engineering or construction-related field, • Minimum of 10 years’ experience in Heavy/Civil Construction Industry Necessary Attributes: • Team player and with strong leadership and interpersonal skills, • Ability to function at a high level in a fast-paced environment, • Must possess the ability to adapt to different personalities, management styles and team compositions