Trabajos Manufacturing en Grand Prairie, Texas - Page 4Crear alertas

Job Description Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From our humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Thompson Pipe Group is looking for an Electro-Maintenance Technician which is responsible for maintaining, troubleshooting, repairing, and installing electrical, mechanical, hydraulic, and pneumatic systems throughout the steel pipe manufacturing facility. This role supports continuous production by minimizing downtime, ensuring equipment reliability, and maintaining a safe working environment in compliance with company policies and regulatory requirements. Thompson Pipe Group is currently looking for an Electro-Maintenance Technician! Pay: $25.00 - $35.00 per hour, based on experience Shift: 5:00 AM – 3:30 PM, 1st Shift. Full-Time, Overtime Available Location: Grand Prairie, TX The Electro-Maintenance Technician. Essential Duties & Responsibilities: • Troubleshoot and repair mechanical, hydraulic, pneumatic and/or electric/electronic equipment, including, but not limited to hoists, cranes, power supplies, boilers, scales, motors, gearboxes, cylinders, gauges and test equipment., • Plan and perform work requiring a thorough knowledge of electrical and mechanical theories and principles, local and national codes, properties of various materials and principles of operation and application of electronic equipment., • Install, start up and shut down equipment in accordance with company safety procedures and OSHA requirements for machine activation and shutdown., • Advise operators and line mechanics of operational procedures and requirements for working safely with electrical/electronic and mechanical equipment and components., • Inform appropriate management and line operators of potential equipment problems and inherent dangers involved., • Have a thorough knowledge of electrical/electronic components, including the use of special diagnostic instruments, with the ability to install, test, diagnose, repair and maintain a variety of production and building equipment., • Must be able to work well with all levels of personnel, whether individually or in a team., • Have working knowledge of troubleshooting Programmable Logic Controllers (PLC) and AC/DC motor drives., • Repair electrical components such as transformers, wiring and electrical/electronic equipment., • Adjust to and follow new procedures and innovations which would add to the efficiency and safety of the operation., • Other duties that may be required., • Qualifications:, • 5+ years of experience as an electrical technician in a manufacturing environment., • Ability to perform the duties of Maintenance II., • Ability to read and write in English (Spanish is a plus) and communicate and work with all levels of personnel., • Ability to work with high voltage/low voltage electricity. Intermediate electrical experience in 3-phase motor branch circuits., • Have math aptitude for measurements, calibrations and comprehension of a variety of testing and diagnostic equipment, • Be available for emergency service during off hours, • Bilingual English/Spanish would be helpful but not required, • Military experience preferred but not required, • Have compliment of tools necessary for high level maintenance tasks, • Have good mechanical/pneumatic/hydraulic aptitude, • Can work well with others and provide positive leadership, • Have a desire to participate in the overall effort to keep all operations running smoothly and cleanly, • Must be able to follow all safety procedures, • Pass the drug test, • Pass technical assessment addressing job-critical maintenance knowledge areas, • Experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings)., • Experience with product manuals (e.g., reading and applying knowledge to make repairs)., • Experience with troubleshooting electrical and mechanical breakdowns (pinpointing and fixing breakdowns)., • Experience with reading mechanical drawings (e., hydraulics, pneumatics). EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Dallas Equal Opportunity Employer, and we pride ourselves on recruiting, employing, training, compensating, and promoting regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law.

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Maintenance Technician - 3rd shift Hours: 10:00 pm - 6:30 am Pay: $30-$32 The QP Maintenance Tech is responsible for but not limited to the following areas of working on and maintaining horizontal form fill and seal equipment, shrink wrap tunnels, forklift minor repairs, stretch wrapper, print registered bundle wrappers and heavy electrical work in the warehouse along with building maintenance. He/she must have great communication skills through phone, email and personal contact. Responsibilities and Essential Duties · Perform routine preventative maintenance on mechanical handling equipment (forklifts, pallet jacks, sweepers, etc.) · Document records of maintenance, inspections, and repairs. · Select repair parts and update parts records. · Repair mechanical damage and replace defective parts, which may include welding, brazing, and soldering. Repairs are made to mechanical handling equipment, racking, floors, plumbing, piping, and other warehouse structural components. · Maintenance and repair of batteries and chargers. · Applies mechanical skills and knowledge to troubleshooting and repair of electrical, plumbing, pipe fitting, fabrication, building construction, and other warehouse maintenance/repair situations. · Reads and interprets schematics, drawings, and other diagnostic aids in the scope of troubleshooting, repair, and fabrication work. · Reads and interprets equipment manuals and work orders to perform required maintenance and service. · Familiar with mechanical hand tools, and with measuring (tape measures, micrometers, drill gauges, etc.) · Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. · Comply with OSHA Safety and Health regulations and maintain a clean and orderly work area Job Contacts (main interfaces inside and outside the company) Candidate Requirements- Tangibles • Strong electrical troubleshooting skills, • Strong mechanical aptitude, • Understanding of high-voltage wiring (480V 3-phase motors), • Multi-craft maintenance and repair (e.g., performing interrelated repairs on electrical systems and mechanical systems, • Willingness to work under pressure to fix equipment, • Work urgently to get the equipment back up and running, • Troubleshooting issues on a wide variety of equipment, • Will conduct repair failures of production and facilities equipment, • Ensure maximum equipment efficiency, effectiveness, and reliability, • Responding to maintenance calls is part of your job, and this can sometimes mean helping complete a repair that has already been started, • Customer Service: given our emphasis on mechanical aptitude, you might be surprised to see customer service listed here, but remember we interact with all levels of team members on the floor. It is important that you, and we as a team, treat all team members with the same level of service as we would our consumers., • Flexibility: you'll be switching gears, shifting priorities, and balancing task lists with calls for maintenance repairs. Flexibility - and keeping your cool - will allow you to both focus and prioritize your work., • Self-Starter: you will often find yourself working unsupervised, so taking ownership of your quality and speed of work is essential when conducting preventative maintenance or addressing equipment failure. · Minimum of a High School Diploma, 5 years equivalent experience. Knowledge/Skills Required: · Basic computer skills including use of Microsoft Office. · Experience with C.M.M.S. software (Preventive Maintenance/Work Order distribution systems). · Understanding encoders and equipment timing. · Knowledge of Servo drives and motors. · Variable Frequency drive operation and configuration. · Basic knowledge of logic software. · Strong knowledge of how components interact with PLC’s (photo eyes, proximity sensors, etc.). Preferred Knowledge/Skills: · Some college is desirable · Fluent in Spanish, both written and verbal, is considered an asset About Pro Pac and Qual Pac Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Sugar Land, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at . Job Type: Full-time

Job Description At Arcadia Cold Storage and Logistics, our mission is to design and deploy modern facilities and provide innovative solutions through the practical application of technology, creating meaningful value for our customers while helping them meet their strategic objectives – establishing The New Age of cold chain. We believe our employees make us different. Our goal is to attract, retain and develop the best employees available in the markets we serve. Only through the strength of our employees will we attain our business goals. POSITION OVERVIEW AND PURPOSE A Maintenance Technician maintains the regular cleaning and service of warehouse equipment and machinery. ESSENTIAL FUNCTIONS AND BASIC DUTIES * Perform refrigeration repairs, cleaning and full service including: * Monitor entire refrigeration system. * Check all freezer temperatures. * Do a walk thru of all freezers checking evaporators * Perform leak check of entire refrigeration system (weekly basis). * Check all levels of refrigeration vessels. * Take readings on all screw compressors, compressor engines and gas generators, if running. * Handle repairs and maintenance of all warehouse machinery (i.e. forklifts and other lift equipment). * Perform preventative maintenance on all machinery. * Set up and install new equipment, modifies or renovates equipment as directed. * Perform general warehouse and vehicle upkeep (i.e. cleaning, painting, repair, etc.). * Perform demand and preventive maintenance for cold storage facility. * Maintain complete inventory records of machinery, equipment repairs and service cycle activities. * Comply with all internal policies and Occupational Safety and Health Administrative (OSHA) rules while working. * Perform other duties and special projects as needed. QUALIFICATIONS * High school diploma or general education degree (GED) and 2-3 years of warehouse inventory-related experience and/or training; or an equivalent combination of relevant education and experience. * Ability to identify technical defects in refrigeration system and all other equipment in the facility. * Ability to read and interpret equipment manuals and work orders to perform required maintenance and service. * Knowledge of refrigeration and overall warehouse maintenance skills is desirable. * Must be able to work independently or in a team environment. * Knowledge of the safety and official procedures for handling equipment. All qualified Arcadia Cold Storage and Logistics applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

Job Description POSITION SUMMARY Texas Inter-Faith Management/40i is a non-profit organization affiliated with The Inter-Faith Group (IFG), which is an alliance of seven independently operated non-profits that share a collective mission to create quality affordable housing and support services to families. Our team members are expected to embrace, exemplify and uphold our core values of Stewardship, Hard-working, Well-respected, Innovation, and Neighborly cooperation (SHWIN), in order to foster positive relationships both within the organization and with external stakeholders. As the Lead Maintenance Technician you are responsible for maintaining the community through landscaping, painting, and apartment turnovers. You bring a proactive and dependable work ethic, along with strong knowledge of HVAC systems and active EPA and CPO certifications. Job Type: Full-time Schedule: Monday-Friday, 8-hour shift, with weekend availability, on-call, and possible overtime. Responsibilities include but are not limited to: • Manage the day-to-day operations of the property including resident satisfaction, retention, and full resident lifecycle activities., • Understand, analyze, and evaluate financial statements and write reports in a clear, concise form., • Oversee, approve, and prepare all lease-related paperwork in an accurate and timely manner., • Maintain thorough product knowledge of property and that of major competition through site tours/visits and telephone surveys. Prepare marketing reports as required., • Clearly and effectively communicate with residents, other employees, vendors, and supervisors in written and verbal form., • Achieve the highest possible net operating income through the implementation of effective cost control, revenue maximization, and delinquency management program., • Take reasonable efforts to see that property complies with all state, federal, and local laws, rules, and regulations applicable to the business., • Make repairs and perform daily maintenance of buildings and mechanical equipment installed inside., • Coordinate all preventive maintenance work by fulfilling the daily work orders and preparing plans., • Prepare vacant units for new tenants in a timely manner., • Plumbing fixture replacement, • Electrical repairs and light fixture replacements, • Sheetrock repairs and interior painting, • HVAC/EPA maintenance, • Carpentry repairs (cabinet and doors), • Troubleshooting all work orders, maintaining/cleaning grounds and common areas., • Monitor and constantly inspect building systems, fire, electrical, security, elevators, etc. Report all unsafe areas to Lead Maintenance., • Maintain a workplace that adheres to OSHA and all safety standards., • Maintain flammable and hazardous materials in a safe and secure area., • Assist with a preventive maintenance program for all building interiors and exteriors including pools, and fitness equipment. HVAC systems, lighting, etc., • Respond to all service requests within 24 hours. Ensure that all service requests are completed correctly and in a timely manner., • Maintain proper inventory of all tools and supplies needed., • Ensure all physical aspects of the building, grounds and amenities meet the Company’s standard for cleanliness, appearance, safety, and overall functionality., • Additional duties as assigned., • Must have experience in plumbing, electrical repair, painting, appliance repair and drywall., • Must be a self-starter and able to work independently., • Must have valid driver's license, insurance and car registration, if driving for business purposes. Knowledge & Skills: • Prior experience as an apartment maintenance technician or similar role, • Must have experience in plumbing, electrical repair, painting, appliance repair and drywall., • Must be a self-starter and able to work independently., • Must have valid driver's license, insurance and car registration, if driving for business purposes., • Ability to be on-call and on the property on short notice, when needed., • HVAC Certified, preferred. Education & Experience: Learn more about our company, please visit our Website: To see our Inter-Faith Group Celebrating 2024, please watch the video at:

Job Description The Maintenance Technician will be responsible for providing technical maintenance expertise related to work order processing, installing, repairing, servicing equipment, and overall maintaining wash quality standards and overall product including the vacuum area and pay station throughout the assigned District. This role will involve training of all team members on maintenance, repairs, and safety standards through training programs and scheduled site visits. The goal of this role is to support a reduction of wash down times, closing site-level work orders, and staying within given capital and operational budgets. This role will work closely with the District Manager, Site Managers, local site level team members and Maintenance Director to expeditiously address wash down, wash quality, and facilities related issues. They will also be responsible for reviewing and following up on completion of any 3rd party scheduled projects. Responsibilities Maintenance Support • Provide technical knowledge and support during wash down, • Perform installation and updating of wash equipment, components, repairing, replacing, troubleshooting equipment and buildings on property, • Ensure optimal operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems; following diagrams, sketches, operations manuals, manufacturer’s instructions, and engineering specifications, troubleshoot malfunctions while training others, • Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments, • Removes defective parts by dismantling devices; using hoists and hand and power tools; examining form and texture of parts, • Adjusts functional parts of devices and control instruments by using hand tools, • Advanced electrical work and control wiring, plumbing maintenance, installing, dismantling, repairing and reassembling machinery and equipment, • Metal fabrication/welding, • Provide resources to site team members to deliver a great wash experience to customers, • Scheduled site visits each week to designated sites within district, • Actively participate in weekly meetings with operations and support team, • Maintain a work order target as budgeted, • Maintain safety standard requirements, • Ensure landscaping is maintained neat and clean, • Attend weekly wash quality meeting with District and facilities management, • Collaborate with District Manager and Site Managers to provide expert knowledge on facilities and to coach, direct, train local based team members., • Work together with Facilities Maintenance Director to schedule production to budget, • Assist acquisitions and new development team in launching locations, • Interact with support office to ensure completion of any licensing or permitting requirements, • Work directly with District Manager and Facilities Maintenance Director to resolve issues and review overall tunnel operations, • Travel and training between all sites in the district performing tunnel repairs and new equipment installs, • Partner closely with District/Area team to complete high priority projects and implement new technology launches, • Maintain budgeted standards for facilities and equipment repairs/Cap Ex projects, • Increase car counts through efficiencies, • Facilitate training with Site Managers, • Participate in training of District Manager new hires on daily operating procedures, closing procedures, and any facility or wash related task related to operations, • Onsite training of team members concerning quality of wash and best safety practices Required Skills • 2+years’ experience in an industrial, facilities, or manufacturing environment, • Knowledge of mechanical/electrical components including shafts, bearings, gear boxes, pumps, motors, drives, • Valid driver’s license, • Associate degree, equivalent technical training, or appropriate hands-on experience, • Certification through a tech/trade school beyond high school preferred, • Ability to effectively train team members on the proper way to safely operate equipment while ensuring a high-quality member experience, • Strong time management and analytical skills, • Excellent verbal and written communication skills, • Excellent organizational skills and attention to detail, • Ability to perform well in a fast-paced environment, • Carwash management/mechanical experience preferred, • Proactive, self-starter on identifying tasks and programs to complete and/or document; strong ability to work under pressure in a fast-paced environment, • Available to be on-call during weekends, • Available to do project in evening after normal business hours, • Extensive travel required

Do you love working on cars? At Manheim (a Cox Automotive company), we're looking for an Automotive Maintenance Technician II to help get vehicles running smoothly. Automotive or Truck Certification, or other related certifications. You'll earn at least $1K for each new eligible technician referral

Job DescriptionDescription: Meyer Distributing is a complete wholesale distributor: automotive, RV/towing, outdoor living, marine, and more. With 85+ locations across the country, Meyer services dealers nationwide. Meyer Logistics is a transportation company that serves as the backbone of Meyer Distributing’s shipping network. Meyer Logistics has a fleet of 500+ top-of-the-line trucks. Meyer Distributing & Logistics are driven to perform – come join our team today! Meyer Distributing is looking for a General Maintenance Technician to join our Arlington team - we are hiring immediately! Meyer Distributing is a leader in automotive specialty products marketing and warehouse distribution. The General Maintenance Technician assists in building maintenance of electrical, plumbing, carpentry and grounds. This includes general maintenance, upkeep, repairs and improvement of the building. License Requirements: • Previous warehouse maintenance or building maintenance experience preferred, • Ability to give special attention to detail, • Must have ability to recognize letters and numbers, • Must have strong verbal communication skills, • Must be able to lift 75 pounds, • Medical, Dental, Vision, Disability, Life Insurance, • Health Savings Account, • 401K with Company Match, • Paid Vacation, • Paid Holidays, • Paid Personal Days, • Casual Attire, • Paid Orientation and on the job Training, • Introductory and Annual Reviews, • Direct Deposit, • Tuition Reimbursement Options Available, • Employee Discount, • Other Meyer Perks: cell phone discounts, rental car discounts, etc., • Stable employment at a growing company that offers advancement opportunities Monday through Friday 6am to 2:45pm Pay: Up to $24 depending on experience General Maintenance Technician duties include but are not limited to: • Make repairs and changes to configurations in the warehouse, includes: painting, moving furniture, drywall, basic plumbing, basic electrical, etc., • Install and repair wifi thermostats, • Perform physical inspections and preventative maintenance, • Perform ac repair work and all other maintenance related repairs #maintenance technician, building maintenance Requirements:

Job Description At CNG, we are owners. We empower every individual to make a significant impact — because every moment matters. Whether you’re starting your career journey or aiming for the next level, we foster a supportive environment where your contributions are valued and celebrated. Why Join CNG? Employee Ownership: Every employee receives equity shares, enabling you to participate in our company's growth and prosperity. Work-Life Balance: We support true work-life integration for all CNG employee owners. Career Growth: Advance your career within our expanding network of manufacturing facilities with comprehensive training and development programs. Purpose-Driven Work: Help create sustainable packaging solutions that reduce food waste and protect our environment for future generations. The Role From machine operators to maintenance technicians to quality inspectors, our teams help protect what matters most—making everyday life safer, smarter, and more sustainable. Schedule: Work only 15 days per month with our unique rotating 2-2-3 schedule. • Night Shift: 7:00pm - 7:00am What You'll Do • Performs comprehensive electrical and mechanical troubleshooting, repair, and maintenance of complex manufacturing equipment, including 24V analog/digital circuitry, VFDs, PLCs, and automated systems, • Executes preventive maintenance programs through scheduled inspections, calibrations, and repairs while documenting all activities in computerized maintenance systems, • Interprets and works from electrical schematics, mechanical drawings, hydraulic/pneumatic layouts, and technical documentation to diagnose and repair equipment, • Tests and troubleshoots electrical systems using multi-meters, ammeters, and diagnostic equipment, • Installs, wires, and verifies operation of 3-phase, single-phase, and DC motors according to electrical schematics, • Implements and strictly follows safety protocols, including LockOut/TagOut procedures and emergency response procedures, • Performs rigging and lifting operations for heavy equipment components while following safety requirements, • Maintains accurate documentation of repairs, parts usage, and preventive maintenance activities, • Coordinates maintenance activities with production schedules and shift leadership to minimize downtime, • Provides technical training and support to operators on equipment operation and basic maintenance, • Participates in continuous improvement initiatives and engineering projects Essential Qualifications: • Proficiency in reading electrical schematics and mechanical blueprints, • Strong troubleshooting skills for electrical and mechanical systems, • Knowledge of precision measuring instruments, • Proficiency in computer-based maintenance systems, • Excellent communication and interpersonal skills, • Multi-skilled in all areas of industrial maintenance, • Able to use precision measuring equipment such as calipers, • Able to engage in a team working collaboratively as well as making repairs independently, • Metalworking and welding skills are a plus, • HVAC experience a plus, • Associate degree in Electromechanical Technology OR equivalent experience Starting Salary: Hourly - Rate based on experience • Employee Ownership – Become a company owner day 1!, • Full medical, dental, and vision insurance upon hire, • Holiday Pay, • Paid vacation, • 401(k) with company match, • Performance-based bonuses, • Tuition reimbursement Join a team where every voice matters, every contribution counts, and every employee shares in our success. Charter Next Generation is an Equal Opportunity Employer committed to creating an inclusive environment for all employees. Learn More About CNG: • Visit our careers page: cnginc.com/careers, • Discover our employee ownership program: cnginc.com/careers/employee-ownership, • See what makes us different: cnginc.com/careers/why-cng #WeAreCNG #LI-KK1

Job DescriptionCompany Description Preferred Apartment Communities combines expertise with a people-first approach, delivering consistent care and communities that feel like home. Our mission is to provide exceptional living experiences for our residents while building a workplace where our associates feel supported, inspired, and prepared to grow. Guided by the belief that we should always be better today than yesterday, we champion continuous improvement across every level of our organization. Through operational excellence, strategic partnerships, and a people-focused approach, we strive to be good neighbors to our residents, to each other, and to the communities we serve. Job Description Responsibilities: Assist in all maintenance requests, preventative maintenance, and amenity area maintenance for the apartment community. Completes maintenance work orders for residents (service appliances, plumbing, HVAC systems, minor electrical, gate systems, pool operations, etc.). Responds and resolves emergency maintenance requests for after business hours calls (weeknights, weekends, and holidays). Prepares vacant apartments to make rent ready. Performs preventative maintenance work. Keep the maintenance shop clean and organized; maintains adequate stock/inventory of parts for equipment, appliances, etc. Interacts directly with residents. Maintains logbooks and databases; enters service requests and status updates into database. Assists in monitoring contractors work performance. Supports the Maintenance Manager in meeting budget responsibilities. Follows and promotes company policies and procedures. Must make Customer Service a priority. If the property does not have a housekeeper, Apartment Maintenance Technician light cleaning duties will be required such as cleaning models, club houses, leasing office, emptying trash, cleaning the grounds and amenity areas, etc. Maintain (clean, orderly, and in working conditions) all amenity areas (pool, compactors, weight rooms, parking decks, etc.) Customer Service Responsibilities A complete clean and neat uniform must be worn when working on any PAA Property including nights and weekends, if applicable. Personal appearance must be clean and neat at all times, according to PAA policy. Communicate with residents and prospects in a manner consistent with PAA's standards. Read and/or listen to resident requests/complaints. Receive resident complaints in a calm, open and professional manner. Solve problems quickly, usually within 24 hours, or contact supervisor for immediate assistance. Deliver newsletters, correspondence, etc. to residents' apartment. Coordinate, set up, attend, and clean up after resident functions (food, tables, display areas, etc.) as requested by the Community Manager. Qualifications Requirements: 1-3 years maintenance experience (apartment maintenance experience preferred) Troubleshooting and problem-solving skills. Budget or basic business finance helpful. Refrigeration certification (type 2 or universal) or obtain in the first 90 days of employment. Valid driver's license (free from major moving violations) and dependable transportation. Physical Requirements: Must be able to use various hand tools and test equipment. Must be able to bend, stoop, and kneel for extended periods of time. Must be able to push and pull up to 300 pounds on wheels. Must be able to lift up to 50 pounds. Must be able to climb ladders of up to 40 feet in height. Must be able to use a hand-truck. Special Physical Requirements As part of your daily maintenance routine, you may be required to move appliances from one apartment unit to another apartment unit on opposite ends of the property. The appliance may have to be transferred by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to well over 300 pounds. Commercial laundry rooms are equipped with single washing machines and/or stacked (double) clothes dryers which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 300 pounds. On occasion, you may be involved in repairs to the building structure. You may be required to move or transport several different building type materials weighing several pounds to over 300 pounds. At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All functions require different physical exertion, and their weight depends on the equipment (usually in excess of 100 pounds). You will be required to perform certain resident service functions or make upgrades to the apartment home. An example would be to install lighting or ceiling fans. Both duties would require the work to be done using a step ladder while lifting. Additional Information What We Offer: • Expected hourly rate of $27/hour. You will be provided a pay rate that is in line with your skills and experience as they relate to the requirements of the job, • Generous PTO program, • 13 paid holidays plus 3 floating holidays and paid volunteer day, • Comprehensive, affordable medical coverage as well as company-paid dental and vision coverage available to all full-time, regular associates, • 401k with exceptional employer match, • Associate Apartment Discount, • Educational Assistance Program (tuition and certifications) Review our privacy policy here: Preferred Apartment Communities is proud to be a US EPA ENERGY STAR® Partner.

Job DescriptionCompany Description Preferred Apartment Communities combines expertise with a people-first approach, delivering consistent care and communities that feel like home. Our mission is to provide exceptional living experiences for our residents while building a workplace where our associates feel supported, inspired, and prepared to grow. Guided by the belief that we should always be better today than yesterday, we champion continuous improvement across every level of our organization. Through operational excellence, strategic partnerships, and a people-focused approach, we strive to be good neighbors to our residents, to each other, and to the communities we serve. Job Description Responsibilities: Assist in all maintenance requests, preventative maintenance, and amenity area maintenance for the apartment community. Completes maintenance work orders for residents (service appliances, plumbing, HVAC systems, minor electrical, gate systems, pool operations, etc.). Responds and resolves emergency maintenance requests for after business hours calls (weeknights, weekends, and holidays). Prepares vacant apartments to make rent ready. Performs preventative maintenance work. Keep the maintenance shop clean and organized; maintains adequate stock/inventory of parts for equipment, appliances, etc. Interacts directly with residents. Maintains logbooks and databases; enters service requests and status updates into database. Assists in monitoring contractors work performance. Supports the Maintenance Manager in meeting budget responsibilities. Follows and promotes company policies and procedures. Must make Customer Service a priority. If the property does not have a housekeeper, Apartment Maintenance Technician light cleaning duties will be required such as cleaning models, club houses, leasing office, emptying trash, cleaning the grounds and amenity areas, etc. Maintain (clean, orderly, and in working conditions) all amenity areas (pool, compactors, weight rooms, parking decks, etc.) Customer Service Responsibilities A complete clean and neat uniform must be worn when working on any PAA Property including nights and weekends, if applicable. Personal appearance must be clean and neat at all times, according to PAA policy. Communicate with residents and prospects in a manner consistent with PAA's standards. Read and/or listen to resident requests/complaints. Receive resident complaints in a calm, open and professional manner. Solve problems quickly, usually within 24 hours, or contact supervisor for immediate assistance. Deliver newsletters, correspondence, etc. to residents' apartment. Coordinate, set up, attend, and clean up after resident functions (food, tables, display areas, etc.) as requested by the Community Manager. Qualifications Requirements: 1-3 years maintenance experience (apartment maintenance experience preferred) Troubleshooting and problem-solving skills. Budget or basic business finance helpful. Refrigeration certification (type 2 or universal) or obtain in the first 90 days of employment. Valid driver's license (free from major moving violations) and dependable transportation. Physical Requirements: Must be able to use various hand tools and test equipment. Must be able to bend, stoop, and kneel for extended periods of time. Must be able to push and pull up to 300 pounds on wheels. Must be able to lift up to 50 pounds. Must be able to climb ladders of up to 40 feet in height. Must be able to use a hand-truck. Special Physical Requirements As part of your daily maintenance routine, you may be required to move appliances from one apartment unit to another apartment unit on opposite ends of the property. The appliance may have to be transferred by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to well over 300 pounds. Commercial laundry rooms are equipped with single washing machines and/or stacked (double) clothes dryers which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 300 pounds. On occasion, you may be involved in repairs to the building structure. You may be required to move or transport several different building type materials weighing several pounds to over 300 pounds. At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All functions require different physical exertion, and their weight depends on the equipment (usually in excess of 100 pounds). You will be required to perform certain resident service functions or make upgrades to the apartment home. An example would be to install lighting or ceiling fans. Both duties would require the work to be done using a step ladder while lifting. #PIQ Additional Information What We Offer: • You will be provided a pay rate that is in line with your skills and experience as they relate to the requirements of the job, • Generous PTO program, • 13 paid holidays plus 3 floating holidays and paid volunteer day, • Comprehensive, affordable medical coverage as well as company-paid dental and vision coverage available to all full-time, regular associates, • 401k with exceptional employer match, • Associate Apartment Discount, • Educational Assistance Program (tuition and certifications) Review our privacy policy here: Preferred Apartment Communities is proud to be a US EPA ENERGY STAR® Partner.

Job Description Are you a hands-on maintenance professional who takes pride in quality workmanship and keeping communities running at their best? Do you enjoy solving problems, improving living spaces, and being part of a team driving meaningful property upgrades? We’re seeking a skilled Maintenance Technician to join our team at Avalon Villas in Irving, TX as it enters an exciting repositioning and turnaround phase. This is a great opportunity for a motivated technician who thrives in a fast-paced environment and wants to play a key role in restoring and enhancing a community during a transformative period. The Opportunity Our community is undergoing significant transition, including capital improvements and operational enhancements. As a Maintenance Technician, you will: • Support renovation and capital improvement projects, • Execute high-quality, efficient unit turns, • Complete service requests promptly and professionally Key Responsibilities Renovation & Project Support • Assist with unit renovations and property upgrades, • Coordinate with vendors and contractors as needed, • Complete unit turns efficiently and thoroughly, • Diagnose and repair maintenance issues in occupied units, • Perform preventative maintenance on HVAC, plumbing, and electrical systems, • Maintain accurate service records, • Help maintain curb appeal and common areas, • Respond promptly and professionally to resident service requests, • Multifamily maintenance experience preferred, • Working knowledge of HVAC, plumbing, electrical, and general building systems, • Strong troubleshooting and problem-solving skills, • Ability to work independently and as part of a team Apply today and help us build the next chapter of success at Avalon Villas.

Job Description Apartment Maintenance Technician Location: MacArthur Park Property Size: 276 Units Learn more about our community at: Modern Living in Irving: MacArthur Park Apartments Why Join Adara Communities? At Adara Communities, we blend 40 years of industry experience with a forward-thinking approach to technology, customer service, and community living. Our success is driven by people - our residents, our investors, and especially our team members. When passionate individuals work together with shared commitment, anything is possible. Join us and be part of a company where your impact truly matters. What You'll Do as an Apartment Lead Maintenance Technician: We're seeking an experienced Maintenance Technician who is hands-on, technically skilled, and ready to lead a service team at a high-volume community. In this role, you will: · Lead, train, and guide maintenance staff throughout daily operations · Complete and oversee service requests to ensure timely, high-quality results · Coordinate and assist with make-readies, upgrades, and maintenance schedules · Ensure all work orders and unit turns are completed efficiently and accurately · Participate in the on-call rotation as scheduled · Maintain organized inventory and ensure proper use of tools/equipment · Support the Property Manager with various maintenance projects and initiatives · Uphold community standards for safety, cleanliness, and resident satisfaction What We're Looking For: To be successful in this role, you MUST have: · Minimum 3 Year(s) Previous Experience as a Lead Maintenance Technician in multifamily housing REQUIRED(including team supervision) · Valid HVAC Certification REQUIRED · Valid Drivers License and reliable transportation · Stable work history · A personal set of basic hand tools · Proven ability to coach, train, and lead service technicians · Strong organizational, troubleshooting, and time-management skills · Willingness to participate in on-call rotation · Bilingual English/Spanish is a plus but not required. Important: Candidates must live within a 20-mile radius of the property or be willing to relocate. Working Environment: This role requires regular physical activity, including standing, walking, sitting, lifting, climbing, stooping, kneeling, and reaching. Team members must be able to lift up to 50 lbs. individually and up to 100 lbs. with assistance. Most work occurs in an outdoor environment, with occasional off-site tasks as needed. All employees must adhere to the company's uniform policy, provided on the first day of employment. All employees must comply with the company's uniform policy, provided on the first day of employment. What Adara Offers You: · Competitive pay · Strong bonus structure · Medical, Dental, Vision, Life & Disability Insurance · Generous PTO · Rental housing discounts · A supportive, people-first culture · Salary Range: $25-28/hour If you're an experienced and skilled maintenance technician looking for a community and company that values your expertise, we'd love to hear from you. Job Posted by ApplicantPro

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The E-Space Manufacturing team builds the world's most advanced aerospace products. As a Manufacturing Technician, you will build the world’s most advanced products. You will collaborate with manufacturing engineers to radically improve processes. Your ideas will be recognized through prototyping and production. Further, you will have frequent opportunities to bring your ideas to life. This position reports to the Director of Manufacturing and is based in Arlington, TX. In order to be successful in this role, you must be willing to work extended hours and weekends as needed. Occasional travel may be required as well. What you'll be doing: • Assemble aerospace components, • Assist engineers with documenting processes, • Provide feedback on process design, • Train colleagues in assembly processes, • Support production and manufacturing, • 5 years of experience in textiles, automotive, or aerospace, • Proficiency Operating automated work cells, • Experience with torque tools, • Textile assembly, • Self-motivated, strong work ethic, and curiosity, • Demonstrated success in a fast-paced environment, • Ability to apply Lean and continuous improvement Extra points for the following:, • Machine shop Experience – lathe, CNC, milling, • Robotics and automation experience, • Apply Lean Six Sigma manufacturing concepts, • Forklift and pallet jack operation experience • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job Description Maintenance Technician is responsible for safely maintaining, repairing, replacing, and modifying all processing, packaging and facility equipment with optimal quality and efficiency. Mechanic C is responsible for maintaining the operational readiness of the FR system using various systems and multiple technical strategies and similar control technology. Responsible for record keeping of chemical use, on site chemical inventories, assisting with bulk chemical deliveries and rinsing of chemical containers when emptied. Actively participates in the development and delivery of various training plans to ensure proper execution of system requirements. Performs a variety of technical troubleshooting and repair activities to ensure proper functioning of technical equipment and system reliability for FR equipment, Industrial Waste (IW) controls and related ancillary systems. Responsible for the neutralization system for chemical mixing room and ensuring correct pH levels are achieved before discharge to the IW system. Job Function Statements - Essential Functions: • Ability to operate our CMMS system and demonstrate 100% functionality to complete work orders as well as log corrective maintenance issues in the system., • Ability to effectively communicate with Production and other mechanics to identify problematic areas of concern; provide and receive feedback and/or support through collection and analysis of information., • Maintain equipment and perform basic mechanical tasks to keep equipment in optimal operating condition; ability to repair 40% of equipment without direction., • Perform some electrical repairs including AC & DC motor controls, solid state motor controls, advance circuits, and grounding diagrams; ability to test equipment within skill range., • Ability to read and understand schematics, drawings, and manuals to establish facts and draw a valid conclusion., • Ability to demonstrate mechanical, electrical, hydraulic, and pneumatic troubleshooting skills., • Must demonstrate an understanding of the company's objectives including productivity, yields, food safety, quality, customer service and cost goals; daily work activities should support achieving those goals., • Ability to demonstrate computer and math skills as part of daily activities such as fractions, decimals, percentages and the metric system, efficient with metric system, ratios, and formulas., • Perform daily inspections, emergency repairs, routine adjustments, and follow periodic preventive maintenance schedule., • Model professional workplace conduct and adherence to company policies such as the Code of Conduct, attendance, punctuality, efficient and productive work habits, and good personal hygiene., • Perform other duties as required or assigned., • Performs chemical mixes for batch creation as needed, • Performs process and mix batch testing as needed, • Maintains the validation and operation of the FR system and its components including but not limited to load cells, probes and chemical dosing pumps. Required Qualifications/Skills: • Must work effectively in a team setting., • Must demonstrate a basic ability to cross-train other mechanics as well as production personnel., • Knowledge of Microsoft computer programs, Outlook, Word, Excel. (Ability to enter data into the system)., • Ability to use Computerized Maintenance Management System to track orders, PM's and inventory., • Achieve a passing score on the Ramsay exam., • Use a multi-meter and other measurement instruments., • Troubleshoot PLC controls, such as Allen-Bradley, GE Fanuc., • Work with computer programs, such as Word and Excel., • Demonstrate proficient fabrication and welding systems., • Demonstrate welding skills., • 1-3 years' experience with industrial equipment {or 1 years of technical training}, preferably in a food processing facility., • Familiar with preventive or reliability-based maintenance. The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed, as an exhaustive list of responsibilities, duties and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Job Posted by ApplicantPro

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement Our essential team members enjoy: *Competitive Pay *Flexible Schedules *Career Path Opportunities *Paid Training Job Position Description: • Clean building floors by sweeping, mopping, scrubbing, or vacuuming them, • Gather and empty trash, • Clean and wipe down furniture and fixtures, • Clean windows, • Mix water and products in containers to prepare cleaning solutions, according to specifications, • Must Pass Background Check, • **Education: It is preferred that the Janitor have training in the janitorial field, • Must be able to use a computer and use basic Microsoft applications, • Must wear a cleanroom gown suit, • Must be able to observe any defects in the cleanroom and report it to managementPhysical Demands and Qualifications:, • Constant (up to 100%) standing, walking, pushing, balancing, stooping, kneeling, crouching, twisting, reaching over head, reaching forward. Must be able to lift and and/or carry 25lbs., • Ability to read cleaning instructions Apply and become a part of ServiceMaster, one of the most respected professional cleaning companies in the Country. We pride ourselves on creating cleaner and healthier environments for our customer, their employees and customers. As a ServiceMaster Service Partner you belong to a team that works together to deliver the best solutions and customer service to our clients. We offer paid training, excellent work/life balance and opportunities for advancement and a career path that matches your interests and goals.

Job Description HiFyve is hiring a Maintenance Technician in the packaging manufacturing industry in Arlington, TX! Salary: $33–$39/hr Shift: 6:00 AM – 6:00 PM (12-hour shifts, overtime as needed) Location: On-site (Arlington, TX) Job Duties and Responsibilities • Perform planned and unplanned maintenance on production and packaging equipment, • Troubleshoot and repair mechanical, electrical, PLC, and drive systems, • Respond to equipment breakdowns and complete timely repairs, • Read and interpret schematics, technical manuals, and work instructions, • Conduct preventative maintenance and document work in CMMS, • Communicate equipment issues and updates with production and leadership teams, • Maintain spare parts inventory and assist with ordering as needed, • Follow OSHA safety standards including LOTO and Arc Flash procedures, • Maintain clean and organized work areas in compliance with sanitation standards Education Requirements • High School Diploma or GED required, • Associate’s degree or technical certification in Mechanical, Electrical, or related field preferred Knowledge, Skills and Abilities: • Strong mechanical and electrical troubleshooting skills, • Experience with PLC systems and AC/DC drives, • Ability to read and interpret schematics and technical documents, • Knowledge of preventative maintenance practices and CMMS systems, • Familiarity with OSHA safety standards and manufacturing protocols, • Ability to lift up to 50 lbs and work in warm, humid environments, • Strong communication and teamwork skills If you are interested, please apply

Job Description HiFyve is hiring a Maintenance Technician in the plastics industry in Arlington, TX! Salary: $33–$39/hr Shift: 6:00 PM – 6:00 AM (12-hour shifts, overtime as needed) Location: On-site in Arlington, TX Job Duties and Responsibilities • Perform planned and unplanned maintenance on production, packaging, and utility equipment, • Troubleshoot and repair PLC systems and AC/DC drives to minimize downtime, • Respond to equipment breakdowns and complete timely repairs, • Read and interpret schematics, technical manuals, and procedures, • Complete preventative maintenance tasks and accurately document work in CMMS, • Communicate equipment issues and updates with production and maintenance teams, • Assist with parts inventory and ensure availability of critical components, • Follow all safety procedures including OSHA standards, LOTO, and Arc Flash protocols, • Maintain clean and organized work areas in compliance with facility standards Education Requirements • High School Diploma or GED required, • Associate’s or Technical degree in Mechanical, Electrical, or related field preferred Knowledge, Skills and Abilities: • Strong mechanical and electrical troubleshooting skills, • Ability to read and interpret schematics and technical documents, • Experience with preventative maintenance and equipment repair, • Knowledge of PLC systems and industrial controls, • Familiarity with CMMS systems for work order tracking, • Understanding of manufacturing safety standards and procedures, • Ability to lift up to 50 lbs and work in warm, humid environments, • Strong communication skills and ability to work in a team environment If you are interested, please apply

Job DescriptionCompany Description Preferred Apartment Communities combines expertise with a people-first approach, delivering consistent care and communities that feel like home. Our mission is to provide exceptional living experiences for our residents while building a workplace where our associates feel supported, inspired, and prepared to grow. Guided by the belief that we should always be better today than yesterday, we champion continuous improvement across every level of our organization. Through operational excellence, strategic partnerships, and a people-focused approach, we strive to be good neighbors to our residents, to each other, and to the communities we serve. Job Description Responsibilities: Assist in all maintenance requests, preventative maintenance, and amenity area maintenance for the apartment community. Completes maintenance work orders for residents (service appliances, plumbing, HVAC systems, minor electrical, gate systems, pool operations, etc.). Responds and resolves emergency maintenance requests for after business hours calls (weeknights, weekends, and holidays). Prepares vacant apartments to make rent ready. Performs preventative maintenance work. Keep the maintenance shop clean and organized; maintains adequate stock/inventory of parts for equipment, appliances, etc. Interacts directly with residents. Maintains logbooks and databases; enters service requests and status updates into database. Assists in monitoring contractors work performance. Supports the Maintenance Manager in meeting budget responsibilities. Follows and promotes company policies and procedures. Must make Customer Service a priority. If the property does not have a housekeeper, Apartment Maintenance Technician light cleaning duties will be required such as cleaning models, club houses, leasing office, emptying trash, cleaning the grounds and amenity areas, etc. Maintain (clean, orderly, and in working conditions) all amenity areas (pool, compactors, weight rooms, parking decks, etc.) Customer Service Responsibilities A complete clean and neat uniform must be worn when working on any PAA Property including nights and weekends, if applicable. Personal appearance must be clean and neat at all times, according to PAA policy. Communicate with residents and prospects in a manner consistent with PAA's standards. Read and/or listen to resident requests/complaints. Receive resident complaints in a calm, open and professional manner. Solve problems quickly, usually within 24 hours, or contact supervisor for immediate assistance. Deliver newsletters, correspondence, etc. to residents' apartment. Coordinate, set up, attend, and clean up after resident functions (food, tables, display areas, etc.) as requested by the Community Manager. Qualifications Requirements: 1-3 years maintenance experience (apartment maintenance experience preferred) Troubleshooting and problem-solving skills. Budget or basic business finance helpful. Refrigeration certification (type 2 or universal) or obtain in the first 90 days of employment. Valid driver's license (free from major moving violations) and dependable transportation. Physical Requirements: Must be able to use various hand tools and test equipment. Must be able to bend, stoop, and kneel for extended periods of time. Must be able to push and pull up to 300 pounds on wheels. Must be able to lift up to 50 pounds. Must be able to climb ladders of up to 40 feet in height. Must be able to use a hand-truck. Special Physical Requirements As part of your daily maintenance routine, you may be required to move appliances from one apartment unit to another apartment unit on opposite ends of the property. The appliance may have to be transferred by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to well over 300 pounds. Commercial laundry rooms are equipped with single washing machines and/or stacked (double) clothes dryers which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 300 pounds. On occasion, you may be involved in repairs to the building structure. You may be required to move or transport several different building type materials weighing several pounds to over 300 pounds. At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All functions require different physical exertion, and their weight depends on the equipment (usually in excess of 100 pounds). You will be required to perform certain resident service functions or make upgrades to the apartment home. An example would be to install lighting or ceiling fans. Both duties would require the work to be done using a step ladder while lifting. Additional Information What We Offer: • Generous PTO program, • 13 paid holidays plus 3 floating holidays and paid volunteer day, • Comprehensive, affordable medical coverage as well as company-paid dental and vision coverage available to all full-time, regular associates, • 401k with exceptional employer match, • Associate Apartment Discount, • Educational Assistance Program (tuition and certifications) Review our privacy policy here: Preferred Apartment Communities is proud to be a US EPA ENERGY STAR® Partner.

Job Description Ver más abajo para la versión en español Maintenance Technician Do you like solving problems and keeping things running smoothly? Do you enjoy working in a fast-paced environment with new challenges every day? If so, we want you on our team! As a Maintenance Technician, you will help maintain and improve our community. From HVAC systems to general repairs, your skills will create a comfortable and well-kept living space for our residents. You will work with a supportive team and management to provide top-quality service. What You Will Do: • Be the go-to fix-it expert – Complete maintenance requests quickly and efficiently, handling tasks like electrical, plumbing, carpentry, masonry, and painting., • Keep things cool (or warm!) – Maintain, repair, and replace HVAC systems to keep residents comfortable year-round., • Tackle repairs big and small – Fix showers, sinks, appliances, doors, cabinets, walls, and building exteriors., • Stay ahead of the game – Schedule and complete preventive maintenance to avoid issues., • Handle minor pool maintenance – Keep community pools clean and safe., • Work with contractors – Help monitor outside vendors to ensure quality work., • Maintain community curb appeal – Assist with light landscaping, trash pickup, and sidewalk cleaning., • Prepare homes for new residents – Make units move-in ready by completing necessary repairs., • Prioritize safety – Report any safety issues to your supervisor immediately and follow all safety regulations., • Skilled in repairs – Basic knowledge of electrical, plumbing, painting, masonry, and carpentry., • Knowledgeable about HVAC systems – Experience with HVAC maintenance., • Effective communicator – Able to interact professionally with residents, coworkers, and management., • Reliable and flexible – Available for emergency repairs and able to work weekends and evenings if needed., • Ability to perform physical tasks – Able to climb up to 40 feet, lift heavy items, distinguish colors, and hear safety alarms., • High school diploma or equivalent, • Two years of experience in facility maintenance WHY JOIN BRIDGE PROPERTY MANAGEMENT? We are dedicated to fostering an inclusive workplace where everyone feels valued. Beyond recruitment, we continuously refine our workplace practices to support our employees’ growth and success. We are also proud to support Environmental, Social, and Governance (ESG) initiatives across all Bridge properties and offices. What we offer • Full Insurance benefit suite including Medical Insurance, Dental Insurance, Vision Insurance, Critical Illness Insurance, Accident Insurance, Short Term Disability, Legal & Identity Theft Insurance, and Pet Insurance., • Company paid Life Insurance (option to buy additional available) and Long-Term Disability., • Access to benefits concierge service., • Access to Mental Health & Well-Being service., • 401K: Bridge Investment Group will match your contributions dollar-for-dollar, up to 6% of your pay. These contributions are fully vested immediately. Eligible employees are automatically enrolled at a 4% contribution rate. *The employee must be at least 21 years of age and have worked for the Company for at least 60 days., • Paid Time Off: Employee will accrue 5.23 hours of paid time off per pay period for a total of 17 days per year., • 11 Paid Holidays per year., • Following six (6) months of employment at the Company, you will be eligible per birth, adoption or placement of a child for four (4) weeks of paid parental leave as the primary caregiver to the child or two weeks of paid parental leave as the secondary caregiver to the child. Following two years of employment at the Company, you will be eligible for twelve weeks of paid parental leave per birth, adoption, or placement of a child if you are the primary caregiver of the child. Técnico(a) de Mantenimiento ¿Te gusta resolver problemas y asegurarte de que todo funcione sin contratiempos? ¿Disfrutas trabajar en un entorno dinámico con nuevos desafíos cada día? ¡Si es así, queremos que formes parte de nuestro equipo! Como Técnico(a) de Mantenimiento, ayudarás a mantener y mejorar nuestra comunidad. Desde sistemas HVAC hasta reparaciones generales, tus habilidades crearán un espacio cómodo y bien cuidado para nuestros residentes. Trabajarás con un equipo y una gerencia solidarios para brindar un servicio de alta calidad. Lo que harás: • Ser el experto en reparaciones – Completar solicitudes de mantenimiento de manera rápida y eficiente, manejando tareas como electricidad, plomería, carpintería, albañilería y pintura., • Mantener el confort – Dar mantenimiento, reparar y reemplazar sistemas HVAC para mantener a los residentes cómodos durante todo el año., • Realizar reparaciones grandes y pequeñas – Arreglar duchas, lavabos, electrodomésticos, puertas, gabinetes, paredes y exteriores del edificio., • Anticiparse a los problemas – Programar y completar mantenimiento preventivo para evitar inconvenientes., • Encargarse del mantenimiento menor de piscinas – Mantener las piscinas limpias y seguras., • Trabajar con contratistas – Supervisar a proveedores externos para asegurar trabajos de calidad., • Mantener la buena apariencia de la comunidad – Ayudar con jardinería ligera, recolección de basura y limpieza de aceras., • Preparar viviendas para nuevos residentes – Dejar las unidades listas para mudanza completando las reparaciones necesarias., • Priorizar la seguridad – Reportar cualquier problema de seguridad al supervisor de inmediato y seguir todas las normativas., • Habilidad en reparaciones – Conocimientos básicos en electricidad, plomería, pintura, albañilería y carpintería., • Conocimiento en sistemas HVAC – Experiencia en mantenimiento de HVAC., • Buena comunicación – Capacidad para interactuar profesionalmente con residentes, compañeros y gerencia., • Confiabilidad y flexibilidad – Disponibilidad para reparaciones de emergencia y para trabajar fines de semana y noches si es necesario., • Capacidad física – Capacidad para subir hasta 40 pies, levantar objetos pesados, distinguir colores y escuchar alarmas de seguridad., • Diploma de escuela secundaria o equivalente, • Dos años de experiencia en mantenimiento de instalaciones ¿POR QUÉ UNIRSE A BRIDGE PROPERTY MANAGEMENT? Nos dedicamos a fomentar un lugar de trabajo inclusivo en el que todos se sientan valorados. Más allá de la contratación, perfeccionamos continuamente nuestras prácticas laborales para apoyar el crecimiento y el éxito de nuestros empleados. También nos enorgullece apoyar las iniciativas medioambientales, sociales y de gobernanza (ESG) en todas las propiedades y oficinas de Bridge. Lo que ofrecemos • Paquete completo de prestaciones de seguro que incluye seguro médico, seguro dental, seguro oftalmológico, seguro de enfermedades graves, seguro de accidentes, incapacidad temporal, seguro legal y de robo de identidad, y seguro para mascotas., • Seguro de vida pagado por la empresa (con opción de contratar coberturas adicionales) y seguro de incapacidad permanente., • Acceso al servicio de conserjería de prestaciones., • Acceso al servicio de salud mental y bienestar., • 401K: Bridge Investment Group igualará sus contribuciones dólar por dólar, hasta el 6 % de su salario. Estas contribuciones se adquieren inmediatamente en su totalidad. Los empleados que cumplan los requisitos se inscriben automáticamente con una tasa de contribución del 4 %. *El empleado debe tener al menos 21 años de edad y haber trabajado para la empresa durante al menos 60 días., • Tiempo libre remunerado: el empleado acumulará 5,23 horas de tiempo libre remunerado por período de pago, lo que supone un total de 17 días al año., • 11 días festivos remunerados al año., • Tras seis (6) meses de empleo en la empresa, tendrá derecho, por cada nacimiento, adopción o acogida de un hijo, a cuatro (4) semanas de permiso parental remunerado como cuidador principal del niño o a dos semanas de permiso parental remunerado como cuidador secundario del niño. Tras dos años de empleo en la empresa, tendrá derecho a doce semanas de permiso parental remunerado por nacimiento, adopción o acogida de un niño si es el cuidador principal del niño.

Job Description Apartment Assistant Maintenance Technician Location: 4220 Esters Rd, Irving, TX 75038, USA Property Size: 232-Units Learn more about our community at: Why Join Adara Communities? At Adara Communities, we blend 40 years of industry experience with a forward-thinking approach to technology, customer service, and community living. Our success is driven by people - our residents, our investors, and especially our team members. When passionate individuals work together with shared commitment, anything is possible. Join us and be part of a company where your impact truly matters. What You'll Do as an Assistant Maintenance Technician: We're looking for an experienced Assistant Maintenance Technician who thrives in a fast-paced, hands-on environment. In this role, you will: · Assist with completing daily service requests for residents · Support the team with unit make-readies and apartment upgrades · Perform general maintenance including plumbing, electrical, appliance repair, and pool repair/upkeep · Work closely with the Lead Maintenance Technician on assigned projects · Help maintain a safe, clean, and well-functioning community · Participate in the on-call rotation as scheduled · Use and maintain your own tools in a professional manner · Provide exceptional customer service to residents and coworkers What We're Looking For: To be successful in this role, you MUST have: · Minimum 2 years of apartment maintenance experience in the multifamily industry (REQUIRED) · Valid HVAC License REQUIRED · Strong knowledge of plumbing, electrical, appliances, pools, and general repairs · Strong troubleshooting and time-management abilities · A personal set of basic hand tools · Willingness to work on-call as scheduled · A positive attitude and ability to work well as part of a team · Bilingual English/Spanish is a plus, but not required · Valid Driver's License and reliable transportation Important: Candidates must live within a 20-mile radius of the property or be willing to relocate. Working Environment: This role requires regular physical activity, including standing, walking, sitting, lifting, climbing, stooping, kneeling, and reaching. Team members must be able to lift up to 50 lbs. individually and up to 100 lbs. with assistance. Most work occurs in an outdoor environment, with occasional off-site tasks as needed. All employees must adhere to the company's uniform policy, provided on the first day of employment. What Adara Offers You: · Competitive pay · Strong bonus structure · Medical, Dental, Vision, Life & Disability Insurance · Generous PTO · Rental housing discounts · A supportive, people-first culture · Salary Range: $21.00/hr - $24.00/hr If you're a skilled maintenance technician ready to support a dynamic community that values your expertise, we'd love to hear from you. #IND123 Job Posted by ApplicantPro

Job DescriptionNow Hiring: Maintenance Technician – Arlington, TX 76012 Pay: $25–$35+ per hour (based on experience) Shift: 1st Shift | Mon–Fri, 7:00 AM – 3:30 PM Summary: We’re seeking an experienced Maintenance Technician to support equipment, facility, and vehicle maintenance and repairs. This role will focus on preventative maintenance, troubleshooting, minimizing downtime, and ensuring a safe work environment. Key Responsibilities: • Perform scheduled maintenance, inspections, and repairs on equipment and facilities., • Troubleshoot issues to improve efficiency, quality, and safety., • Maintain accurate documentation of all maintenance activities., • Keep work areas clean, organized, and compliant with safety standards., • Operate company vehicles and run occasional errands as needed.Qualifications:, • High school diploma or equivalent; technical degree preferred., • 3–5 years industrial maintenance experience required., • Strong troubleshooting, mechanical, and organizational skills., • Basic computer knowledge (Microsoft Office, databases)., • Must be a U.S. Citizen or Permanent Resident (ITAR compliance)., • Ability to lift up to 35 lbs and work in industrial environments.How To Apply:, • If you have any questions, please contact us at 817-622-0962.

Job Description Are you a maintenance superhero looking for a place where you can make a positive difference? Our maintenance team members are a valued part of our operations and we’re looking for you! We’re CCMC, a community management company specializing in master-planned communities. Our vision of inspiring a resident-centric focus is brought to life by our core values: Integrity, Respect, Service and Community. Our Maintenance Technician is responsible for ensuring the cleanliness of the facilities and buildings including garbage and waste disposal; performing event/room setups and breakdowns. This role is fundamental in maintaining our beautiful community and ensuring a safe environment for all. What you’ll accomplish: • Perform maintenance work of all skill levels from basic repairs to more complex tasks including:, • Lighting checks, cleaning light lenses, bulb and ballast replacements, • Maintaining and repairing doors and locks, • Caulking, prep work, and painting, • Minor carpentry repairs, • Plumbing maintenance such as repairing or replacing faucets and fixtures, • Maintaining limited access gates, storage closets, doors, and locks, • Cleaning of areas around the pool, dumpster, and common areas, • Previous experience in a related maintenance field, along with electrical, plumbing, and general maintenance is desired, • Experience in general maintenance, and entry-level computer skills including Microsoft Office and Outlook, • Be self-motivated, observant, have high attention to detail, and will detect maintenance needs throughout the property and rectify concerns, • Must be able to effectively communicate with managers, residents, and peers verbally and in writing; have the ability to follow instructions and schedules as designated; and be dependable, solution-oriented, and professional in appearance, • A pleasant personality and people skills are a must., • This candidate will also be required to pass a background check, a physical, as well as a drug screening., • Must have a valid driver’s license in the state of employment and personal vehicle., • Mobility: Ability to walk the grounds long distances in various weather conditions., • Lifting and Carrying: Occasionally lifting and carrying supplies or equipment up to 75 pounds., • Extended Sitting or Standing: Capability to sit or stand for extended periods during meetings or events., • Manual Dexterity: Skills in using technology, including computers and mobile devices. If driving is, or becomes, a requirement of the role, it is required, at all times, that you hold a valid state driver’s license for the class of vehicle you are driving, maintain a clean motor vehicle report, and hold current automobile insurance at statutory limits. You must notify Human Resources immediately regarding any change to your motor vehicle standing. CCMC may periodically review motor vehicle reports to ensure compliance with these requirements. What we offer: • Comprehensive benefits package including medical, dental, and vision, • Wellness program, • Flexible Spending Accounts, • Company-matching 401k contributions, • Paid time off for vacation, holidays, medical, and volunteering, • Paid parental leave, • Training and educational assistance, • Support programs, including Employee Assistance Program and Calm Health, • Optional benefits including short- and long-term disability, life insurance, and pet insurance, • Most importantly, a caring team who is dedicated to your success!

Job Description Atlantic Pacific Companies is a dynamic industry leader, with a growing and diverse portfolio of properties throughout Florida, Georgia, Texas, California, North Carolina, and Washington, D.C. We are looking for passionate people who enjoy challenges and helping others. Does this sound like you? Join us! Our Company is seeking an experienced and highly motivated Apartment Maintenance Technician for our Market Rate Apartment Community, 2803 Riverside Apartments, of 416 units in Grand Prairie, Texas. Job Type: Full-Time Job Description Summary: The Maintenance Technician performs routine maintenance in individual apartments, common areas and amenity areas. Prepares vacant units for new move-ins. Performs routine preventive maintenance. Assists in various cleaning functions and assists in monitoring the grounds. Maintains and repairs physical structures of buildings and maintains grounds by performing the following duties. Responsibilities: • Maintains and repairs buildings: areas of responsibility include, but are not limited to: electrical, plumbing, carpentry, HVAC, landscaping, painting, cleaning, appliances, pools, utilities, elevators, fencing/gates, and fire systems., • Responsible for completing all service requests/ work orders at the direction of the maintenance supervisor or property manager as required within 24 hours., • Complete apartment service tickets and log all assigned work orders accurately and in a timely fashion., • Manage vacant apartments by preparing them through the turnover process so apartments are ready to lease to new prospects. The work includes the maintenance of the unit, painting, cleaning and carpet cleaning., • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck, street sweeper and other equipment used within the maintenance department., • Assists in ordering supplies for the property., • High School diploma, or GED equivalency, and minimum of 1-2 years direct experience as a Make Ready or Maintenance Technician for an apartment community, or equivalent combination of education and experience., • EPA I or II, Universal or HVAC certified is required., • CPO Certification is a plus and experience maintaining pools is required., • Must have supervisory experience., • Thorough understanding of electrical, plumbing, HVAC systems, carpentry, landscaping, painting, cleaning, appliances, utilities, elevators, fencing/gates, and fire systems., • Experience with Onesite, Yardi, or other property management software is a plus For more information, please visit Our Website Follow Us: Facebook LinkedIn Twitter Atlantic Pacific Companies is a drug-free workplace. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Disclaimer: The tasks and responsibilities listed are not the only ones applicable to the positions

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Level C Industrial Maintenance Technician Job Type: Full-time Pay: $28.00 - $32.00 per hour Job Purpose The Level C Maintenance Technician is responsible for the maintenance, troubleshooting, and repair of packaging and warehouse equipment at Quality Packaging. This includes horizontal form-fill-seal machines, shrink wrap tunnels, forklifts, stretch wrappers, and registered bundle wrappers, as well as handling general building and electrical maintenance. The role requires hands-on technical expertise, timely response to maintenance issues, and effective communication across various channels (phone, email, and in person). Key Responsibilities and Essential Duties • Perform routine preventative maintenance on mechanical handling equipment (e.g., forklifts, pallet jacks, sweepers)., • Diagnose and repair equipment malfunctions involving mechanical, electrical, pneumatic, and hydraulic systems., • Maintain and repair batteries and chargers., • Conduct minor welding, brazing, soldering, and fabrication tasks as required., • Address mechanical damage to warehouse infrastructure, including racking, flooring, and piping., • Interpret equipment manuals, blueprints, and work orders to perform scheduled maintenance and service tasks., • Maintain accurate records of inspections, repairs, and preventive maintenance tasks., • Operate mechanical hand tools and measurement instruments (tape measures, micrometers, etc.)., • Support production efficiency by ensuring minimal downtime through prompt maintenance actions. Technical Requirements • Strong mechanical aptitude and electrical troubleshooting skills., • Ability to work with high-voltage systems, including 480V 3-phase motors., • Multi-disciplinary repair experience (mechanical, electrical, pneumatic, hydraulic)., • Familiarity with Variable Frequency Drives (VFDs), Servo motors and drives, encoders, and equipment timing., • Basic understanding of PLC systems, sensors (photo eyes, proximity sensors), and logic software., • Customer Service Orientation: Ability to communicate effectively with team members at all levels., • Flexibility: Ability to shift priorities and remain calm under pressure in a fast-paced environment., • Self-Motivation: Capable of working independently and taking initiative in troubleshooting and maintenance tasks., • High School Diploma or GED required; technical certifications or trade school training preferred., • Minimum of 5 years’ relevant hands-on maintenance experience in a production or packaging environment. Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Brookshire, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at .

Graphics Production Assistant Arlington, TX (76013) | Onsite REQUIRED QUALIFICATIONS • 1+ year of experience working with graphics • Ability to follow instructions and work independently or in a team • High School Diploma or equivalent • Must have reliable transportation • Must pass a back

Job DescriptionThe JobSquad Solutions Team is currently looking for a Machine Operator 1st & 2nd Shift to work at a company located in the Grand Prairie, TX area! Job Title Machine Operator 1st & 2nd ShiftPosition Location Grand Prairie, TXPay/hours for position $18 /Hr Responsibilities of position Task Management/The Jobsquad is looking for a Production Machine Operator for one of our clients.Contact info. Lorena Colon 954-658-1341 or 305-915-1970Location: Grand Prairie, TXShift: 1st & 2nd shift availablePay rate: $18/Hr.Forklift experience The JobSquad Solutions Team is made up of experts around the country. Serving our local workforce communities is our passion. #TM1234Company DescriptionJobSquad Staffing Solutions - Is a solid staffing company offering transparent communication from start to finish. Our ultimate goal is to find the career for you!JobSquad Staffing Solutions - Is a solid staffing company offering transparent communication from start to finish. Our ultimate goal is to find the career for you!

Job Description Maintenance Technician – 1st Shift Location: Arlington, TX Schedule: Monday – Friday | 8:00 AM – 5:00 PM Pay Range: $32 – $35 per hour (depending on experience) Reports To: Maintenance Manager Position Summary The Maintenance Technician is responsible for maintaining, troubleshooting, and repairing manufacturing equipment, automation systems, and facility systems to support safe, efficient, and continuous production. This role ensures equipment reliability through preventive maintenance, rapid response to breakdowns, equipment upgrades, and participation in continuous improvement initiatives. Key Responsibilities Preventive Maintenance • Perform scheduled and unscheduled preventive maintenance., • Diagnose and repair mechanical, electrical, pneumatic, and electronic systems., • Assist with installation and setup of new equipment., • Perform machine calibration and alignment., • Record maintenance activities in CMMS., • Follow all safety policies and procedures., • Identify equipment safety hazards., • Identify and implement process improvements to reduce downtime and improve equipment performance., • Maintain spare parts inventory., • Order parts and coordinate with vendors and purchasing., • Assist with facility-related emergencies., • Collaborate with maintenance and production teams as needed. Qualifications Required • High school diploma or equivalent (technical degree or certifications preferred)., • 5+ years of equipment or machinery maintenance experience (printing industry preferred)., • Strong mechanical and electrical knowledge., • Welding, fabrication, and/or machining experience., • Ability to diagnose and solve problems independently., • Basic computer skills (CMMS systems, email, documentation)., • Ability to read, write, and communicate in English., • Ability to use hand tools, power tools, and heavy-duty tools., • Ability to work with minimal supervision. Physical Requirements • Ability to stand, walk, bend, and climb ladders., • Ability to lift up to 50 pounds., • Ability to work in hot, cold, noisy, or confined environments. Work Schedule • First Shift: Monday – Friday, 8:00 AM – 5:00 PM, • May require rotating shifts, weekends, overtime, and on-call work as needed. Compensation Hourly Pay Range: $32 – $35 per hour depending on experience. Company DescriptionSpecialized Recruiting Division of Express Employment Professionals Recruiting Division of Express Employment Professionals\r\n

Job Description Maintenance Technician The Maintenance Technician is responsible for supporting the operation, reliability, and compliance of facility systems and production equipment within a 503B outsourcing facility. This role ensures that all equipment, utilities, and facility infrastructure are maintained in a qualified and operational state in accordance with current Good Manufacturing Practices (cGMP), FDA guidance, and internal quality systems. The Maintenance Technician plays a critical role in minimizing downtime, supporting aseptic operations, and maintaining a state of inspection readiness. The hours for this position are M-F, 8 am – 5 pm, with occasional over-time or schedule changes (5 am – 2 pm). Responsibilities: • Perform general building maintenance activities, including but not limited to lamp replacement, minor construction tasks, basic electrical work, door repairs, and routine plumbing repairs., • Maintain and support production equipment, ensuring proper functionality and operational readiness., • Promote equipment reliability through execution of preventive maintenance programs and facility improvement initiatives., • Perform scheduled preventive maintenance activities and minor mechanical repairs on production and facility equipment., • Use structured preventive maintenance systems to maintain machinery in accordance with manufacturer recommendations and established maintenance best practices., • Maintain accurate and comprehensive documentation of all maintenance activities, repairs, and equipment service history., • Coordinate with external service providers as necessary by initiating and managing service requests or work orders., • Demonstrate familiarity with applicable guidance and standards that define equipment performance and operational requirements., • Apply and support 5S principles and Lean practices to enhance efficiency, organization, and continuous improvement within the facility., • Support warehouse operations as needed, including receiving, handling, and movement of materials., • Perform physical tasks as required, including lifting up to 50 pounds, and the ability to stand, walk, and sit for extended periods., • Adhere to cleanroom protocols, including proper gowning procedures and maintenance of cleanroom etiquette., • Perform additional duties as assigned to support operational needs. EOE/ADA Carie Boyd Pharmaceuticals is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Carie Boyd Pharmaceuticals will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. Confidentiality The employee must maintain the confidentiality of company information and, pursuant to State and Federal Law (including the Health Insurance Portability and Accountability (HIPAA) Act of 1996), protected health information. Company DescriptionWe specialize in compounding office-use and personalized prescription medications.We specialize in compounding office-use and personalized prescription medications.

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Position: Valet Driver Location: Toyota Music Factory Events Shift(s): Seasonal Pay: Base pay of $14/hr plus tips! A job as a Valet could be the first step in your career. Pave the way with SP+, a diverse and innovative company! What you’ll do • Inspect every vehicle before safely parking it, noting all findings., • Explain valet rates to customers., • Quickly and kindly respond to customer questions., • Observe traffic laws and safe driving practices., • Report all accidents, safety hazards, unusual occurrences, and policy violations to management., • Know the area's major streets, landmarks, and freeways and give customers directions if needed., • Come to work in your clean uniform every scheduled shift, on time, and ready to work., • Remain in complete uniform for the entirety of your shift., • Assist management with additional duties as assigned. Qualifications What you need • A valid state driver’s license, current address, and acceptable driving record., • The ability to safely drive a vehicle with a manual transmission (stick shift) is a plus., • Availability to work special shifts if needed (2nd, 3rd shift and/or weekends)., • Proof of eligibility to work legally in the U.S. (must provide valid documentation if hired)., • The ability to provide accurate information to customers and co-workers and respond professionally to customer problems or complaints., • The ability to read, write, add, and subtract US currency and comprehend instructions, short emails, and memos., • The ability to follow written and verbal instructions and calmly adapt to changes, delays, and unexpected events while working. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job Description Production Supervisor needed on 3rd shift in Grand Prairie. Schedule- 3rd shift 10PM-6AM - Will Train on 1st shift for minimum of 4 weeks. (6am-3pm) Salary- 65-72k DOE. Location- Grand Prairie-76155 Ideal candidate will be responsible for planning, coordinating, and implementing all production job orders to assure the client's satisfaction and the continued growth of our business. Your Responsibilities: Leading and managing a team through a wide variety of employee centered issues requiring knowledge of employment law, knowledge of corporate/location policies and procedures, effective communications, performance appraisal procedures, performance management, hiring and interviewing, documentation, interpersonal skills, coaching skills, change management, conflict resolution, delegation, goal setting, motivation and employee engagement. Hands-on supervision of daily operations including workflow scheduling, management of staff scheduling, monitoring productivity and quality, production process troubleshooting, and all other activities required to ensure on-time delivers and 100% customer satisfaction. Daily communication with other shifts and departments regarding workflow, staffing, and production issues. Daily focus on leading production team to exceed performance goals and continue to raise the bar. You Must Have: · HS Grad with Manufacturing Management or equivalent experience · 5+ years of Supervisory experience (15 or more employees) in a fast-paced, quick turn production environment · Knowledge and experience with production practices utilizing ISO 9001 standards, 5S and Lean Manufacturing · Experience with compliance related operations and standards, e.g., financial, banking, healthcare, etc. · Must be energized and motivated, and enjoy work · Proven management skills with solid interpersonal abilities to establish and grow effective working relationships · Strong leadership skills and the ability to work independently in the absence of the extended resources on the day shift · Excellent verbal and written communication skills; demonstrated ability to communicate and interact effectively across functional groups and management levels · Ability to prioritize, remain focused on task, while maintaining quality, safety, and on-time delivery · Intermediate level skills in Microsoft Office (Excel. Word, PowerPoint) · Strong Problem solving and troubleshooting skills · Ability to quickly identify and effectively document, manage, and communicate employee issues regarding attendance, productivity, quality, or other performance-related areas · Working knowledge & experience in digital printing and insertion (roll and sheet fed devices) · G7 color management experience. · Experience with Xerox and Canon cut sheet printers and roll feed printers (Color Stream 3900) · Available to extend hours and work weekend shifts as needed. We Would Also Prefer: · 5+ years of experience in the mail industry and experience working in print production environment · Experience with postal regulations

Job Description Overview Location: The Arbors of Euless Why Highmark Residential? Because every position is considered critical to Highmark’s success and reputation, we take care to employ those who aspire to become the best in their field. Those who succeed at Highmark will do so because they enjoy an empowered, challenging, fulfilling, and financially rewarding workplace! Why we need you: The Maintenance Technician I is responsible for efficiently performing all necessary maintenance for the apartment community What Highmark can do for YOU: • Help you achieve your goals by continuous professional development and regular career progression sessions, • Competitive pay for the market, • Monthly bonus opportunities for all site associates, • 30% associate rent discount, • Medical, Dental & Vision benefits the 1st of the month following 30 days of full-time employment, • Company-provided life insurance, short term and long term disability coverage, • Flexible Spending accounts, • 401(k) eligibility after 90 days, with 4% Highmark match, • Professional Certification & Tuition reimbursement, • Vacation, Sick and Personal Time off available to use after 90 days, • 10 paid holidays, • Paid parental leave Responsibilities What your day to day might look like: • Perform carpentry, appliance, electrical, painting & plumbing duties, • Install, repair, and rekey deadbolt locks, • Ensure service requests are completed in a timely manner, • Participates in the ongoing community preservation plan and preventive maintenance program, • Maintain company safety standards Qualifications We’re looking for you if: • Interested in the above, • You’re punctual, dependable and a self-starter, • You have experience in make-ready and apartment maintenance, • Valid driver’s license and reliable transportation, • Willing to work a flexible schedule & on-call as required, • High school diploma or equivalent to #SWM Req ID: 2026-9204

Job Description Stonemark Management is looking for Maintenance Technicians for multiple properties in the Dallas, Irving and Mesquite Texas area. We are recruiting for ALL positions and there are multiple positions to fill. Join us at Hidden Ridge Apartments for this exciting Job Fair! Location: Hidden Ridge Apartments 1290 Hidden Ridge, Irving, TX 75038 Tuesday, April 14th, 2026 and Wednesday, April 15th, 2026 from 9am to 5pm. Face to face interviews will be conducted and job offers will be made. If you are looking for a fresh start this new year with a good company, come and interview for one of our open positions. Stonemark Management, a national multi-family management company has an opening for a highly skilled, certified Service (Maintenance) Technician to join our team. Ideal candidates must be people oriented with technical aptitude and strong organizational and make-ready skills. Must be capable of working with little or no supervision. If you are interested in an environment that offers new opportunities/experiences everyday, please read further. Position Summary: Assists the Service Supervisor in preserving and maintaining physical facilities and grounds within the community so that they are safe and aesthetically appealing to residents and prospective residents by performing the following duties. Job Responsibilities: Assists in other types of maintenance as needed. Provides service to residents in a prompt and professional manner. Provides repair work on vacant apartments in a timely fashion. Completes service requests in a timely manner. Completes preventive maintenance checklist. Performs on-call duty for emergency or when assigned. Assists Service Supervisor in completing projects. Experience/Skills: Must have HVAC Certification. Minimum two years in a service position at an apartment community or a related position. EPA Certification - Type I and Type II preferred. Organization skills and attention to detail are essential. Must be mechanically inclined. Knowledge of plumbing, heating, air conditioning, construction and electrical. Must be able to use all types of hand and power tools, Freon recovery machinery, air conditioning gauges and vacuum pumps. Must be able flexible to work some weekends and holidays and available for emergency after hours calls. EOE/Drug free Workplace. Must submit to a background check and drug testing. • Principals only. Recruiters, please don't contact this job poster., • do NOT contact us with unsolicited services or offers

Job Description ROLE AND PURPOSE: Maintain the operation of all District facilities as required to meet department responsibilities. QUALIFICATIONS: Education/Certification: • High School graduate or GED equivalent from an accredited institution preferred, • Maintain a satisfactory driving record that meets the standards of the District's insurance policy, • General knowledge of commercial maintenance and carpentry, • Commercial Painting and Flooring Experience Preferred, • Mechanical Aptitude and ability to learn MAINTENANCE SUPPORT: • Follow all AISD safety procedures as covered in AISD safety handbook, • Abide by all AISD policies and procedures as outlined in AISD auxiliary employee handbook, • Assume responsibility for safe operation and care of assigned service vehicle, tools and equipment, • Assume responsibility for personal time card, • Assume responsibility for maintenance and repair of all AISD physical facilities and structures, programmed maintenance procedures, and assigned zone, • Maintain and repair District physical facilities and structures and complete programmed maintenance procedures, • Maintain all physical buildings and structures including concrete, flooring, drywall, acoustical ceilings, and commercial carpentry, as directed by department foreman, • Coordinate, organize and complete daily assignments, assuming responsibility for proper documentation regarding assigned tasks, works orders, and procurement of supplies, • Initiate work orders within assigned zones as needed, • Position may require overtime, as necessary to maintain function of District facilities, • Position will respond to service calls in a timely manner while serving on-call duty, as necessary to maintain function of District facilities, • Any other duties as may be directed by your immediate supervisor and/or any other supervisor within your line of authority, • Maintain the operation of all District facilities as required to meet department responsibilities. MENTAL DEMANDS / PHYSICAL DEMANDS / ENVIRONMENTAL FACTORS: • Environment Factors: Will work in, under, around, and outside of all AISD facilities, will be exposed to all outside conditions found in this region of Texas, exposure to dust, chemicals, and other materials and slippery and uneven walking surfaces., • Physical Demands: While performing the duties of this job, the employee is regularly required to stand, move throughout the room and or facility, communicate verbally and electronically, use hands to finger, handle or feel objects, tools, or controls, ability to work overhead, reach with hands and arms, stoop, kneel, crouch, and or crawl; climb; balance, and drive. Employee may be required to work on knees from time to time., • While performing the duties of this job, the employee is regularly required to lift or exert force of up to 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust and focus., • Must be able to safely tolerate the elements as required for the craft. Be able to work off scaffolding and a minimum of 40-foot ladder

Job DescriptionJob: Machine Operator Shift: 1st - 7 am - 3:30 (OT may be required) Pay: $16 - $18/hr based on experience Location: Dallas, TX 75212 Machine operators in printing, folding, and inserting involve setting up, operating, and maintaining high-speed equipment to produce printed, folded, and mailed materials. These roles require technical knowledge of machinery, strong attention to detail for quality control, and the ability to work in a fast-paced environment. Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities Core Responsibilities • Machine Set-Up & Operation: Set up, adjust, and operate folders, inserters, and printing presses according to work orders. This includes adjusting rollers, folders, and guides for different paper sizes and folds., • Quality Control: Inspect finished products (printed, folded, or inserted) for defects like wrinkles, misaligned folds, or incorrect inserts., • Preventive Maintenance: Perform routine cleaning, lubrication, and minor repairs on equipment to prevent breakdowns., • Material Handling: Load paper stock, ink, and materials into machines., • Workflow Coordination: Work with bindery teams to ensure timely completion of projects., • Safety Adherence: Maintain a clean work area and follow all safety protocols.Specialized Roles, • Folder Operator: Focus on folding, slitting, and scoring printed sheets into signatures., • Inserter Operator: Operates high-speed equipment to insert printed matter into envelopes or folders., • Printing Operator: Handles offset, flexographic, or digital presses, including installing plates and mixing ink.Qualifications & Skills, • Education: High School Diploma or work experience., • Experience: 1–3+ years of experience in a manufacturing, printing, or bindery environment preferred., • Technical Skills: Ability to read work orders., • Physical Demands: Ability to stand for long periods, work in a fast-paced environment, and lift up to 50 lbs., • Digital Literacy: Familiarity with computers for inputting production data.Key Performance Indicators (KPIs) Requisition #cmlr71j3m6ycb0jlczrqo6mkq

Job Description Exotec designs and delivers advanced automation solutions that help global brands optimize warehouse performance while supporting warehouse teams across at every level. Our organization combines elegant mechanical design, resilient software, and a deep understanding of logistics operations to solve our clients’ most complex challenges. Working at Exotec means contributing to the systems used daily in warehouses. You'll collaborate with passionate colleagues who share knowledge, challenge ideas, and work in a respectful environment that values the diversity of more than 1,000 ExoPeople around the world. Here, your work moves from concept to production and into the hands of clients who rely on it each day. You’ll join a company where collaboration, excellence, and meaningful impact guide what's built next. Role Summary This Field Maintenance Technician role represents the start of something new at Exotec As the first traveling maintenance technician in our newly created Hypercare function, you’ll play a foundational role in how we support clients through the critical go‑live phase. You’ll travel frequently—often for several weeks at a time—to warehouse sites across North America to provide hands‑on maintenance support, stabilize operations, resolve early technical issues, and set each system up for long‑term success. Responsibilities • Oversee the maintenance of all the systems (robots, machines, conveyors) installed by Exotec in the client’s warehouse, • Perform corrective and preventative maintenance tasks on systems and machines, • Monitor the performance of the installations, • Work both autonomously and collaboratively to maintain Exotec's system availability targets (99%), • Interact with on-site client teams to perform maintenance tasks and provide operational guidance, • Assist with installation and deployment of new systems or machines, • Respond quickly to emergency situations, escalating and requesting additional assistance as needed We strongly encourage applications from candidates of all genders to help us build a truly inclusive environment. If you don’t meet every requirement listed below, don’t worry—your skills and experiences may still make you a great fit! • 3-5+ years of maintenance experience, ideally with some exposure to robotics, • Good general knowledge and competency in mechanical, electrical and software maintenance operations and engineering; if no robotics-specific experience, then at least a strong interest working on various robotics systems and machines, • Highly organized with ability to maintain composure and quality through high-stress incidents and/or escalations, • Strong interpersonal skills with the ability to build rapport with client leadership teams and de-escalate situations, • Comfort and openness with regular travel (up to 100% of working hours), • Ability to meet the physical demands of the job:, • Use and manipulation of standard hand tools, • Occasional lifting up to 50 lbs, • Working from heights of up to 50 ft, • Use and operation of lifts with a manufacturer‑rated capacity of 250 lbs, including tools and equipment (approximately 30 lbs), • Stooping, kneeling, crouching or crawling to access and repair equipment at ground level, • Working on overhead equipment, including extended reaching and manual dexterity, • Competitive compensation package, inclusive of hourly rate with annual bonus potential, • Comprehensive medical, dental and vision coverage, • Generous vacation and time off policy, • 401(k) with company match up to 5%, • Eligibility to participate in Employee Share Program after 1 year of employment, • Continuous opportunities for training and development in a quickly growing company, • Company-hosted teambuilding and social events with North America HQ (in Atlanta, GA) through the year To apply, please submit your résumé. Only shortlisted candidates will be contacted for the next steps in the hiring process. We look forward to receiving your application! Exotec is an equal opportunity employer and all applicants will be considered without regard to race, religion, color, sex, gender, sexual orientation, pregnancy, age, national origin, ancestry, physical or mental disability, medical condition, military or veteran status, genetic information, marital status, ethnicity, or any other protected classification, in accordance with applicable federal, state, and local laws. We provide an inclusive work environment that respects all differences.

Job DescriptionSalary: CDL Driver & Bore Machine Operator BROADBAND TELECOM SERVICES, INC. Broadband Telecom Services is a full-service telecommunications construction contracting company with multiple locations throughout the state of Texas. JOB CLASSIFICATION: FULL-TIME LOCATION: Aledo, Texas PAY RATE: Hourly REPORTS TO: Construction Supervisor JOB DESCRIPTION CDL driver must have Class A driver license and be willing to work on a construction crew. Responsible for transporting heavy machinery needed at various job sites throughout the area. This position also requires set up and operating boring machine to bore, drill, tap, spot face, groove, mill or ream metal work pieces according to specifications, tooling instructions, and standard charts, applying knowledge of boring procedures and machining methods. This position will require heavy labor digging, lifting, working on ladders, and teamwork. This position requires the employee to work out in the elements. PREFERRED QUALIFICATIONS Experience with a trencher or other construction equipment is a plus Use problem-solving skills to identify issues, excellent attention to detail to ensure quality control and the ability to work with other technicians in a team setting environment Must work in many different settings and be able to problem solve each setting with professionalism and good customer service Must be able to maintain and ensure company safety procedures are followed Position requires exposure to outside elements Performs other duties as assigned by Supervisor and provide general assistance to other employees as directed ESSENTIAL JOB FUNCTIONS- INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING: • Must have a valid CDL for pulling equipment to job sites and be able to pass a background check drug test, and MVR report Must be able to dig trenches and run heavy construction equipment ex: Ditch Witch & Vermeer Directional Operators Move drilling equipment to construction location ex: driving or loading and unloading the machine Set up drilling and hoisting machinery ex: connecting drill pipe sections Locators to run underground facility location equipment Drill operator (any size & any brand) locate cables and drill heads Connect power cables or hoses for water or air supply Operate the drilling machinery ex: regulating pressure of tools, controlling the speed of rotary tables and air flows Operate slush pumps in order to ensure circulation and consistency of drilling fluid/mud in well Correct problems in drilled holes caused by mechanical breakdowns or by harmful natural conditions Locate and recover lost or broken bits, casings, drill pipes etc. from wells using special tools Maintain records of footage drilled, materials and tools used Report information about drilling process to the supervisor on site Ensure safety guidelines are enforced and weekly safety topics are followed EDUCATION & LICENSES/CERTIFICATES: • High school diploma or equivalent preferred., • Must possess a valid Commercial Drivers License and a safe driving record. LANGUAGE/MATHEMATICAL SKILLS & REASONING ABILITY Ability to work aloft. Must have manual dexterity and the ability to utilize various hand tools and test equipment. Must be able to drive a truck or van including a truck/van Must be able to lift up to 50 pounds. Must be able to type on a computer, and utilize a smart phone to read and update prints. Must be able to kneel, crawl, push, pull, bend, stoop, lift and dig. Must meet and maintain Companys safe weight policy. BENEFITS • Paid Time Off (Holiday/Vacation/PTO), • Benefits Package, • 401K Retirement plan with company match Please visit our website at apply online and learn more about our company. Broadband Telecom Services is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individuals race, color, religion, creed, sex, national origin, age handicap, disability, marital status, veteran status, reserve or National Guard status, or any other status protected by applicable law. Broadband Telecom Services, Inc. participates in the E-Verify Program.

Job Description • Oversee the quality of products sold to customers and assure that quality standards conform to state regulations and Company expectations., • Organize, upkeep, and maintain back stock in good order and easily accessible., • Understand and recognize the different parts of meat products sold to customers, and the different techniques that can be used to cook the products., • Package, weigh and price Meat department merchandise., • Maintain overall department appearance and replenish display cases., • Follow established Weights and Measures procedures (tares) mandated by the state., • Suggest Company products and services to customers., • Operate equipment and machinery such as baler, forklift, etc. based on operational needs., • Minimum of 2 years in a Meat customer service role required., • High school diploma/GED required or equivalent work experience, • College coursework preferred, • Must be 18 years of age, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals, • Ability to write routine reports and correspondence, • Ability to speak effectively after groups of customers or employees of organization, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form, • Ability to deal with problems involving several concrete variables in standardized situations, • Bilingual (English and Spanish) highly preferred, • Work well with others in a team oriented environment where one willingly takes on additional tasks with a positive attitude to help out the team/department., • Knowledge of principles and processes for providing customer services - this includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction, • Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems., • Requires regular attendance and/or physical presence at the job, • Fast paced, high volume, detail oriented work environment, • Exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; and toxic or caustic chemicals, • The noise level in the work environment is usually moderate, • Occasionally requires the ability to move, lift, carry, pull or push heavy objects or materials., • Lift up to 50 pounds unassisted., • Requires extensive use of hands, • Reach above and below shoulder height, constant walking, standing in one place for long periods of time, bending, stooping, lifting, etc., • Work in hot and cold environments., • Follow company health and safety rules and wear protective equipment when and where applicable., • Safely use food handling and sanitation chemicals and equipment to maintain department cleanliness standards and local, State and Federal agencies regulations and requirements.

Job Description Responsibilities A Diesel Technician is responsible for providing service to our customers while maintaining exceptional customer service. This can include: wet kit and product pump installs, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Basic Qualifications: • Wet kit and product pump installs, • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier., • Current and valid CDL and Medical card as required by the FMVS preferred but not required. Rush Truck Leasing opens the door to the world of opportunity. We are the premier commercial transportation solutions provider for businesses across North America. Our network of Idealease and PacLease partners allow us to offer our customers complete truck leasing and rental solutions across our network of dealerships. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job DescriptionBenefits: • Locally Owned Business, • Team oriented environment, • Opportunity for Growth, • Flexibility, • Competitive Compensation, • Competitive salary, • Employee discounts, • Free uniforms, • Paid time off The Production Technician Role Were looking for a Production Technician who takes pride in consistent, accurate repair work and understands the importance of following shop processes. This role is responsible for completing repair and maintenance services efficiently, documenting work properly, and supporting daily shop output. The Production Technician plays a key role in keeping vehicles moving through the shop correctly and on time. Requirements and Responsibilities Perform repair and maintenance work accurately across a wide range of vehicle systems Complete digital vehicle inspections and document findings clearly and consistently Follow shop SOPs, safety guidelines, and repair procedures on every job Communicate job status and repair needs with advisors and shop leadership Maintain a clean, organized workspace and support overall shop flow You May Be a Great Fit If You: Take pride in producing consistent, quality work Manage your time well and stay productive throughout the day Follow processes and documentation standards without cutting corners Communicate clearly and work well with a team Value reliability, accountability, and steady workflow Why Join Our Team? Because this role is about more than turning wrenches. Youll be trusted to produce quality repairs, support shop efficiency, and contribute to a team that values professionalism, consistency, and doing the job right in a locally owned environment.

Job Description3RD MACHINE OPERATORS NEEDED IN GRAND PRAIRIE!!! TEMP TO PERM OPPORTUNITY We are seeking dynamic associates with some computer knowledge, be flexible, and enjoy coming to work! Metro Staffing has partnered with a renowned manufacturing company located in Grand Prairie Tx. Our client specializes in the production of high-quality springs for various industrial applications and offers a great opportunity for individuals seeking to start their career in the manufacturing industry. Machine Operators play a crucial role in the production process and will be responsible for operating various machinery and equipment. Key Responsibilities: • Operate and monitor equipment such as presses, cutters, and assembly machines to uphold production standards, • Perform routine maintenance, cleaning, and troubleshooting of machines to ensure smooth operations, • Inspect finished products for quality assurance, making adjustments as necessary, • Collaborate with team members and supervisors to meet production goals and deadlines, • Adhere to safety protocols and guidelines to maintain a secure work environment, • Record production data accurately and maintain production records Requirements: • High school diploma or equivalent, • Strong attention to detail and ability to follow instructions, • Basic mechanical aptitude and troubleshooting skills, • Excellent time management and organizational skills, • Ability to work effectively in a team-oriented environment, • Familiarity with manufacturing processes and equipment is a plus, but not required 3RD SHIFT: 10 PM - 6:30 AM MONDAY THRU FRIDAY PAY: $17.25 HOURLY APPLY TODAY! TEXT 817.204.0850 FOR IMMEDIATE CONSIDERATION AFTER YOU APPLY

Job Description2ND SHIFT MACHINE OPERATORS NEEDED IN GRAND PRAIRIE!!! TEMP TO PERM OPPORTUNITY We are seeking dynamic associates with some computer knowledge, be flexible, and enjoy coming to work! Metro Staffing has partnered with a renowned manufacturing company located in Grand Prairie Tx. Our client specializes in the production of high-quality springs for various industrial applications and offers a great opportunity for individuals seeking to start their career in the manufacturing industry. Machine Operators play a crucial role in the production process and will be responsible for operating various machinery and equipment. Key Responsibilities: • Operate and monitor equipment such as presses, cutters, and assembly machines to uphold production standards, • Perform routine maintenance, cleaning, and troubleshooting of machines to ensure smooth operations, • Inspect finished products for quality assurance, making adjustments as necessary, • Collaborate with team members and supervisors to meet production goals and deadlines, • Adhere to safety protocols and guidelines to maintain a secure work environment, • Record production data accurately and maintain production records Requirements: • High school diploma or equivalent, • Strong attention to detail and ability to follow instructions, • Basic mechanical aptitude and troubleshooting skills, • Excellent time management and organizational skills, • Ability to work effectively in a team-oriented environment, • Familiarity with manufacturing processes and equipment is a plus, but not required 1ST SHIFT: 2 PM - 10:30 PM MONDAY THRU FRIDAY PAY $16.50 HOURLY APPLY TODAY! TEXT 817.204.0850 FOR IMMEDIATE CONSIDERATION AFTER YOU APPLY

Job DescriptionMACHINE OPERATORS NEEDED IN GRAND PRAIRIE!!! We are seeking dynamic associates with some computer knowledge, be flexible, and enjoy coming to work! Metro Staffing has partnered with a renowned manufacturing company located in Grand Prairie Tx. Our client specializes in the production of high-quality springs for various industrial applications and offers a great opportunity for individuals seeking to start their career in the manufacturing industry. Machine Operators play a crucial role in the production process and will be responsible for operating various machinery and equipment. Key Responsibilities: • Operate and monitor equipment such as presses, cutters, and assembly machines to uphold production standards, • Perform routine maintenance, cleaning, and troubleshooting of machines to ensure smooth operations, • Inspect finished products for quality assurance, making adjustments as necessary, • Collaborate with team members and supervisors to meet production goals and deadlines, • Adhere to safety protocols and guidelines to maintain a secure work environment, • Record production data accurately and maintain production records Requirements: • High school diploma or equivalent, • Strong attention to detail and ability to follow instructions, • Basic mechanical aptitude and troubleshooting skills, • Excellent time management and organizational skills, • Ability to work effectively in a team-oriented environment, • Familiarity with manufacturing processes and equipment is a plus, but not required 1ST SHIFT: 6 AM - 2:30 PM MONDAY THRU FRIDAY PAY $15 HOURLY APPLY TODAY! TEXT 817.204.0850 FOR IMMEDIATE CONSIDERATION AFTER YOU APPLY

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. About the Role We are seeking a strategic and experienced Global Supply Manager to lead sourcing and supplier management for capital equipment and, over time, expand into aerospace product procurement. This role is pivotal in supporting manufacturing scale-up, facility expansion, and long-term supply chain resilience across our global operations.What You Will Be Doing: * Capital Equipment Sourcing (Primary Focus) • Lead global sourcing initiatives for high-value capital equipment including test systems, and automation tools., • Manage end-to-end procurement lifecycle: RFQs, contract negotiation, delivery, installation, and commissioning., • Collaborate with engineering, facilities, and operations to define specifications and ensure alignment with production needs.Aerospace Product Sourcing (Secondary Focus), • Support sourcing of aerospace-grade components, materials, and assemblies as needed., • Develop supplier strategies for long-lead items, spares program, and high-reliability parts., • Ensure compliance with aerospace standards (AS9100, ITAR, DFARS) and customer requirements.Supplier Management, • Identify, qualify, and manage global suppliers and OEMs., • Monitor supplier performance and lead corrective actions when needed., • Build long-term partnerships to support innovation, cost reduction, and supply continuity.Cross-Functional Collaboration, • Partner with engineering, quality, finance, operations, and legal teams to support sourcing decisions and contract execution., • Lead cross-functional sourcing projects for new site builds, equipment upgrades, and product launches.Risk & Compliance, • Mitigate supply chain risks through dual sourcing, inventory strategies, and supplier diversification., • Ensure compliance with export/import regulations and internal procurement policies.Data & Systems, • Use ERP and sourcing platforms to manage procurement workflows, reporting, and analytics., • Analyze spend data and market trends to inform sourcing strategies.What You Bring to This Role:, • Bachelor’s degree in supply chain, Engineering, Business, or related field., • 7+ years of experience in global supply management, with a strong background in capital equipment sourcing., • Experience in aerospace, defense, or advanced manufacturing industries., • Strong negotiation, contract management, and supplier development skills., • Proficiency in ERP systems (Netsuite, SAP, Oracle) and sourcing tools.Extra Points For the Following:, • Familiarity with aerospace product specifications and regulatory requirements., • Experience with international logistics and global supplier networks., • Ability to manage complex projects across multiple regions and time zones., • Excellent communication, analytical, and leadership skills. The estimated range is meant to reflect an anticipated salary range for the position in question, which is based on market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, depth of relevant experience, and other relevant factors. For questions about this, please speak to the recruiter if you decide to apply for the role and are selected for an interview.This is a full time, exempt position, based out of either our Saratoga, CA or Arlington, TX office. The target base pay for this position is $100,000 - $200,000 annually. The total compensation packaged will be determined by various factors such as your relevant job-related knowledge, skills, and experience. We are redefining how satellites are designed, manufactured and used—so we’re looking for candidates with passion, deep knowledge and direct experience on LEO satellite component development, design and in-orbit activities. If that’s your experience – then we’ll be immediately wow-ed. E-Space is not currently able to provide employment sponsorship for candidates who do not hold work authorization for the location of this role. Why E-Space is right for you: As a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry. We want you to make the most of your journey at E-Space. That’s why we support and invest in the physical, emotional and financial well-being of our team members and their families. Some of what you can expect when working at E-Space: • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionSalary: Job Title: Senior Product Manager Location: On-site Irving, TX Type: Contract Reports to: Founder & Chief Product Officer About the Role We are looking for aSenior Product Manager to take ownership of a working software platform and lead its evolution into a scalable, customer-facing product. This role requires a strong product management foundation, the ability to operate in fast-moving environments, and a focus on delivering practical value to users. You will work cross-functionally with engineering, sales, delivery teams, and company leadership to define product priorities, shape the user experience, and help bring the product to broader market adoption. This is a hands-on, execution-oriented role for someone who can work through ambiguity, make confident product decisions, and is comfortable leading the product development process from discovery through delivery. Key Responsibilities • Own and drive the product roadmap based on user feedback, business goals, and technical input, • Define product requirements and specifications that are clear, actionable, and aligned with real customer needs, • Prioritize and manage the backlog to ensure the engineering team is focused on the most impactful work, • Lead discovery efforts with customers, internal stakeholders, and industry experts to identify high-value problems, • Collaborate with engineering to plan sprints, review progress, and deliver high-quality product releases, • Ensure usability, performance, and product completeness meet the standards required for broader adoption, • Contribute to product enablement efforts including onboarding, documentation, and internal support materials, • Evaluate product performance and adoption to inform future improvements and iterations, • Stay up to date with emerging technologies that could expand product value including embedded systems, AI, or data platforms Qualifications • 5+ years of experience as a Product Manager in a B2B software or platform company, • Proven track record of leading cross-functional teams to deliver successful products, • Strong understanding of product management principles, frameworks, and lifecycle practices, • Demonstrated ability to gather requirements, define product specs, and work closely with engineering, • Experience working in early-stage or evolving product environments, • Excellent communication, prioritization, and stakeholder management skills, • Comfortable working hands-on in a startup or scale-up environment, • Curiosity about real-world problems and openness to exploring both software and hardware-based solutions, • Technical fluency enough to understand trade-offs and collaborate effectively with engineers Nice to Have • Experience with data platforms, edge computing, embedded systems, or industrial applications, • Familiarity with tools such as Jira, Notion, Figma, Postman, or analytics platforms, • Exposure to product-led growth, onboarding optimization, or workflow automation products, • A background in engineering, data, or systems thinking What Were Not Looking For • Candidates who have never worked directly with an engineering team to ship software, • Those unfamiliar with standard product management tools and frameworks, • Individuals who need to be handed strategy or direction this role requires critical thinking and initiative, • Remote-only candidates this is an on-site position in Irving, TX Why Join Us Youll be joining a team focused on solving meaningful, practical problems with real users. Youll have the opportunity to take a working platform and shape it into a high-impact product, with strong ownership and direct influence on the outcome. To Apply: Please send your resume and a short note outlining your product experience to [email].

Job Description This position is for Darling's brand Rousselot Job Summary The Global Product Manager - Nextida owns Nextida platforms post-launch, ensuring scalable growth, disciplined expansion, and strong commercial performance. This role is essential in bringing operational excellence in innovation, quality, sales and marketing. You develop a strong product expertise and are the go-to person for all product related topics. This role ensures commercial discipline while balancing scale, complexity, and profitability. Essential Duties/Responsibilities: • Define and own the global product portfolio strategy and roadmap for launched Nextida products, • Evaluate and recommend opportunities for the portfolio, including new application targets, • Partner with Innovation, Science, and Marketing to align portfolio strategy with clinical data and market needs, • Monitor portfolio performance and recommend strategic adjustments, • Own post-launch lifecycle management of Nextida products, from initial scale-up through maturity, • Identify optimization opportunities based on customer feedback, performance data, and regulatory developments, • Coordinate updates to product specifications, claims, and positioning as evidence and markets evolve, • Partner with Global Marketing to deliver accurate and compelling sales enablement materials, including product guides and FAQs, • Define clear product positioning, value propositions, and pricing logic for Nextida products, • Support Sales in strategic customer engagements requiring deep product and platform expertise, • Master's Degree in Food, Pharmaceutical, Chemistry or Nutritional science, followed by Marketing and/or Economic studies or related fields, • Minimum of 5 years of professional Product Management experience, • Willingness to travel 30% of the Overseas trips may require travel during weekendsPreferred Qualifications. Knowledge and Skills:, • Experience and knowledge of Bl Tools is preferred, • Experienced project manager with experience in NPD, improvement projects, launch - post launch The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all responsibilities, duties, knowledge, skills, and abilities needed to perform the job. Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time. The ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment to effective customer service delivery, integrity, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Darling Ingredients. Darling Ingredients is an equal opportunity employer and gives consideration to qualified applicants without regard to race, color, creed, religion, age, pregnancy, sex, sexual orientation, gender identity, national origin, genetic information, physical or mental disability, military service, protected veteran status, or any other characteristic protected by applicable federal, state and local law. Know Your Rights: If you would like more information, please click on the link and paste into your browser: Job Posted by ApplicantPro

Job DescriptionJob Title: API SME & Technical Product Manager Location: Irving, TX 75039 (Onsite) Experience: 14+ Years Job Overview: We are seeking a highly skilled API SME & Technical Product Manager to lead the development of an API-first, programmable networking platform. The ideal candidate will have extensive experience in API-driven product development, B2B networking, and cloud-based NaaS solutions. This role involves close collaboration with engineering teams to enhance partner integrations and deliver a seamless, secure, and scalable networking experience for enterprise customers. Key Responsibilities 1. API-Driven Product Development • Define and execute an API-first NaaS product roadmap, focusing on network provisioning., • Collaborate with engineering teams to design, test, and deploy APIs for authentication, inventory, provisioning, billing, telemetry, and capacity management., • Enhance the developer experience (DX) by ensuring well-documented, secure, and scalable API integrations. 2. Partner Integrations & Ecosystem Strategy • Lead integration efforts with partners, ensuring seamless platform interconnectivity., • Define API contracts and authentication mechanisms for automated provisioning and multi-vendor orchestration., • Ensure compliance with TMF-compliant APIs and industry standards. 3. Product Execution & Delivery • Oversee end-to-end feature execution, ensuring alignment between product, engineering, and business teams., • Establish and track KPIs for API adoption, performance, and partner integration success., • Work cross-functionally with sales, marketing, and support teams to drive a successful GTM strategy. 4. Network & Cloud Expertise • Understand network programmability, NaaS, and multi-cloud networking (AWS, GCP, Azure)., • Collaborate with networking teams to optimize L2/L3 connectivity and interconnection strategies (NNI, ENNI, SD-WAN)., • Stay updated on AI-driven networking, telemetry, and automation trends. Flexible work from home options available.

Job DescriptionSalary: Hourly Bore Machine Operator BROADBAND TELECOM SERVICES, INC. Broadband Telecom Services is a full-service telecommunications construction contracting company with multiple locations throughout the state of Texas. JOB CLASSIFICATION: FULL-TIME LOCATION: Aledo, Texas PAY RATE: Hourly REPORTS TO: Construction Supervisor JOB DESCRIPTION This position will require set up and operating boring machine to bore, drill, tap, spot face, groove, mill or ream metal work pieces according to specifications, tooling instructions, and standard charts, applying knowledge of boring procedures and machining methods. This position will require heavy labor digging, lifting, working on ladders, and teamwork. This position requires the employee to work out in the elements. PREFERRED QUALIFICATIONS Experience with a trencher or other construction equipment is a plus ESSENTIAL JOB FUNCTIONS- INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING: Must be able to dig trenches and run heavy construction equipment ex: Ditch Witch & Vermeer Directional Operators Move drilling equipment to construction location ex: driving or loading and unloading the machine Set up drilling and hoisting machinery ex: connecting drill pipe sections Locators to run underground facility location equipment Drill operator (any size & any brand) locate cables and drill heads Connect power cables or hoses for water or air supply Operate the drilling machinery ex: regulating pressure of tools, controlling the speed of rotary tables and air flows Operate slush pumps in order to ensure circulation and consistency of drilling fluid/mud in well Correct problems in drilled holes caused by mechanical breakdowns or by harmful natural conditions Locate and recover lost or broken bits, casings, drill pipes etc. from wells using special tools Maintain records of footage drilled, materials and tools used Report information about drilling process to the supervisor on site Ensure safety guidelines are enforced and weekly safety topics are followed EDUCATION & LICENSES/CERTIFICATES: • High school diploma or equivalent preferred., • Must possess a valid Drivers License and a safe driving record. LANGUAGE/MATHEMATICAL SKILLS & REASONING ABILITY • Must be able to use written and verbal communications in English language. REASONING ABILITY & PHYSICAL DEMANDS • Ability to work aloft., • Must have manual dexterity and the ability to utilize various hand tools and test equipment., • Must be able to drive a truck or van including a truck/van with an aerial lift, • Must be able to lift up to 50 pounds., • Must be able to type on a computer, and utilize a smart phone to read and update prints., • Must be able to kneel, crawl, push, pull, bend, stoop, lift and dig. BENEFITS • Paid Time Off (Holiday/Vacation/PTO), • Benefits Package, • 401K Retirement plan with company match Please visit our website at apply online and learn more about our company. Broadband Telecom Services is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individuals race, color, religion, creed, sex, national origin, age handicap, disability, marital status, veteran status, reserve or National Guard status, or any other status protected by applicable law. Broadband Telecom Services, Inc. participates in the E-Verify Program.

Job Description VARIOUS LOCATIONS!! The Fountain Group is currently seeking Aircraft Technicians for a prominent client of ours. There are multiple positions open in the following locations: • North Charleston, SC ($25 - $37/hr - $5k Relocation Package!!!), • Maxwell AFB, AL - $41.19/hr, • San Antonio, TX - $40.17/hr, • Various locations expected to become available Job Description: • $25-$42/HR (depending on location/years of experience)., • 12-month assignments (with possibility to extend based on performance and budget)., • Various skillsets needed (electrical, structural, fuel tank sealer, interior specialists, systems assembly and testing), • General responsibilities include:, • Assemble, disassemble, and/or modify systems by changing, removing, replacing, or upgrading aerospace vehicle components to correct failures or implement changes, • Oversees assembly, disassembly, or overhaul, • Configures aerospace vehicles and bench test equipment, • Troubleshoots complex pneumatic, hydraulic, and electrical systems to isolate mechanical or electrical faults and repair faulty components, • Performs validation/verification testing of systems and components, • Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications, and inspection results), • Inspects components and verifies repairs for flight worthiness requirements. Qualifications: • HS Diploma or GED is required., • 6 months+ of aircraft repair/maintenance/assembly experience is required (depending on location they may require more) Open to aerospace academic program graduates., • Some positions are open to automotive/structural/electrical background with no aerospace experience., • Positions require a US Person due to export compliance regulations., • Some positions require an active secret clearance., • Some positions require an A&P license#LI-CK1